Documente Academic
Documente Profesional
Documente Cultură
Centralised distribution
General
DD381399
Downstream circuits are connected from the front, to spring terminals. Contact pressure automatically adapts to the size of the conductor. It does not depend on the operator. Contacts are insensitive to vibrations and thermal variations. Only one cable (flexible or rigid, without a metal ferrule) can be inserted in a spring terminal. Degree of protection: IPxxB. Advantages b a reliable electrical connection, no maintenance required (tightness guaranteed over time) b very fast connection b easy phase balancing b rewiring is very easy if the switchboard is expanded or modified. The four-pole distribution block is made up of: b a fully insulated, one-piece distribution block complying with the degree of protection IPxxB (protection against direct contacts) b a modular cover. The design of the front (45 mm nose) blends perfectly into a row comprising modular devices. Designation Cat. no.
Distribloc 63 A (top connection) Distribloc 63 A (bottom connection) 125 A Distribloc distribution block 160 A Distribloc distribution block + connection 04040 04041 04045 04046
Cable connection.
Electrical characteristics b rated insulation level: Ui = 750 V b rated operational current Ie (40C): v 125 A for the 125 A Distribloc v 160 A for the 160 A Distribloc with its prefabricated connection for INS160 or NSA160 b short-circuit withstand current: the reinforced breaking capacity due to cascading in circuit-breaker combinations is maintained. The worst-case situations have been tested. b complies with the low-voltage device standard IEC 60947.7.1 and/or IEC 60439.1 b impulse withstand voltage Uimp = 8 kV. Supply b tunnel terminal on 125 A Distribloc 125 for 6 to 35v flexible cables (10 to 35v rigid cables) b the 160 A Distribloc is supplied with a prefabricated flexible connection. It is designed for an INS100/160 or NSA160 switch-disconnector, installed on the left or right. Distribution (125 and 160 A Distribloc) b spring terminals: v 2 outgoers from 1 to 10v, flexible or rigid v 3 outgoers from 1 to 6v, flexible or rigid v 7 outgoers from 1 to 4v, flexible or rigid b tunnel terminals: v 1 outgoer from 4 to 16v, flexible (4 to 25v rigid) Supply b an identification label b adhesive labels for phase identification b a prefabricated flexible connection for the INS160 or NSA160 (160 A Distribloc only).
DD383474 DD381660
100E22010.indd
Distribution
Centralised distribution
Installation b clipped onto a modular rail b width occupied is 12 modules (9 mm each) b screwed to plain or slotted backplate. Distances between centres = 100 x 75 mm. Dimensions
DD381608 DD381609
125 A connection
PD390658
Set of four flexible connections, 35v , L = 210 mm. To supply a 125 A Distribloc from an NG125 or an INS125. Designation
,
Cat. no.
04047
100E22010.indd