Sunteți pe pagina 1din 3

Call for papers for special issue on:

INTERNATIONAL CONGRESS AMMA 2013 - Automotive Motor Mobility Ambient 17-19 October 2013 CLUJ-NAPOCA, ROMANIA
Central European Journal of Engineering
The Central European Journal of Engineering calls for papers which will be published in the Topical issue devoted to AMMA 2013 in the 1st issue of 2014 (issue 4(1)).

The paper submission starts from 15 January 2013 till 01 June 2013.
The interested authors are kindly invited to register at our paper processing system available at http://www.editorialmanager.com/ceje and submit their contribution using special track established for this topical issue. All papers will go through the CEJE's high standards, quick, fair and comprehensive peer-review procedure. The Guest Editors will be responsible for the final paper selection.

Guest Editors
Prof. Dr.Ing. Michael Butsch University for Applied Sciences, Konstanz, Germany michael.butsch@htwg-konstanz.de Associate Prof. Dr. Ing. Istvan Barabas Faculty of Mechanics, Technical University of ClujNapoca, Romania Istvan.Barabas@auto.utcluj.ro

Central European Journal of Engineering co-published by Versita and Springer http://www.versita.com/ceje

Anna Kowalska, PhD Managing Editor Central European Journal of Engineering akowalska@versita.com

Technicalities

The journal home page: http://versita.com/ceje/ On-line content: http://www.springerlink.com/content/1896-1541 Submission of full papers: from 15 January 2013 till 1 June 2013 Notification of paper acceptance: 15 August 2013 Submission of final and corrected papers: 15 September 2013 Journal publication: 10 December 2013 (in the issue 4(1) Authors are strongly encouraged to prepare their papers according to the Instructions for authors: http://versita.com/ceje/authors/ Paper processing system: http://www.editorialmanager.com/ceje/ During papers upload authors must choose as article type Topical Issue: AMMA 2013 In case on any questions concerning topical issue or paper processing system please contact the Managing Editor, Dr. Anna Kowalska at: akowalska@versita.com

Additional information about the Journal


CEJE is a peer-reviewed, online-only journal co-published by Versita and Springer. The journal was founded with the aim of providing a multidisciplinary exchange platform for scientists and engineers of main engineering branches. Our mission is to publish original manuscripts that report on significant advances in their respective areas and would be of importance to the general engineering audience. Innovative and multidisciplinary papers are particularly welcomed. Both research and review articles, as well as communications and vision papers are published. CEJE is already indexed at: Chemical Abstracts Service (CAS), Google Scholar, OCLC, Summon by Serial Solutions and Scopus. For more details, please visit our web pages at: http://versita.com/ceje and http://www.springer.com/engineering/journal/13531.

Central European Journal of Engineering co-published by Versita and Springer http://www.versita.com/ceje

Anna Kowalska, PhD Managing Editor Central European Journal of Engineering akowalska@versita.com

Additional information about the Topical Issue


This topical issue is devoted to AMMA 2013 (17 19 October). The main purpose of this special issue is to gather in an annual scientific agenda, papers that will include scientific research, inventions and new ideas in the automotive area, which is highlighted within the existing industry in Romania and not only. The topic from where we would like to receive your fresh new ideas is: Hybrid and electric vehicles, powertrain and propulsion, vehicle design, advanced engineering and simulation, road safety and traffic control, materials and technologies, green vehicles and pollution. Complete AMMA 2013 Themes: 1. Hybrid and electric vehicles 1.1. Hybrid drivetrain 1.2. Zero Emission Vehicles 1.3. Electric vehicles 1.4. Power electronics 2. Powertrain and propulsion 2.1. Advanced powertrain 2.2. Engine management 2.3. Chassis systems 2.4. Transmission systems 3. Vehicle Design 3.1. Vehicle body design 3.2. Vehicle dynamics 4. Advanced engineering and simulation 4.1. Process simulation 4.2. Innovative technologies 4.3. Complex engineering 4.4. Virtual environment 5. Road safety and traffic control 5.1. Road traffic 5.2. Accident analysis 5.3. Transport infrastructure 5.4. Crash testing 5.5. Driver assistance systems 6. Materials and technologies 6.1. New materials and technologies 6.2. Quality, reliability and maintenance 7. Green Vehicles and pollution 7.1. Alternative fuels 7.2. Noise pollution 7.3. Pollution reduction alternatives

Central European Journal of Engineering co-published by Versita and Springer http://www.versita.com/ceje

Anna Kowalska, PhD Managing Editor Central European Journal of Engineering akowalska@versita.com

S-ar putea să vă placă și