Documente Academic
Documente Profesional
Documente Cultură
Website: www.gmt.gb.com
Triflex Mountings
Mounts for engines, compressors, generators, marine engines and other installations where anti-vibration mounts are required. GMT manufacture two main types of Triflex mountings, Type 1 and Type 2. These are available in a variety of sizes with many held in stock. Please contact our technical sales department for assistance with selection.
F 2 HOLES G MTG1497 B H
E D
GMT Triflex Type 1 mountings have been developed to provide vibration isolation against heavy duty machinery including diesel generators, compressors, precision machinery and electronic installations. The mountings provide relatively high deflections and the design is such that there are different degrees of stiffness in the three main axes. A rebound control option is available upon request.
Part No.
TRIFLEX-MTG2597 TRIFLEX-MTG1494 TRIFLEX-MTG1497
A
122 230 230
B
132 204 204
C
75 110.5 123.5
D
115 205 205
E (mm)
90 165 165
F
84 148 148
G
13 18 18
H
M16 M16 M16
(mm) (mm)
Compression Characteristics
TRIFLEX-MTG2597
4.0
05
TRIFLEX-MTG1497
70
TRIFLEX-MTG1494
20 15
60 70
15
Load (kN)
Load (kN)
04 03 02 01
10
60 55 50 45
Load (kN)
65
10 5 0
55 45
0 0 5 10 15
Deflection (mm)
Deflection (mm)
Deflection (mm)
Note: There is a possible deviation of 20% in the above load/deflection graphs due to production and hardness tolerances
Stiffness Ratio
The Triflex 1 mountings have different degrees of stiffness in the three main axes, vertical, longitudinal and lateral.
Direction of normal load
Crankshaft Direction
For GMT Triflex Type 1 mountings, the recommended orientation for installation is as detailed below:
Type 2
t
Cr
an
h ks
af
GMT RUBBER-METAL-TECHNIC LTD. The Sidings, Station Road, Guiseley, Leeds, West Yorkshire, LS20 8BX, U.K.
Page: 9.1
Version 9.1
Website: www.gmt.gb.com
Part No.
TRIFLEX-MTG1086 TRIFLEX-MTG1087
B G
A
120 184 230
B
60 75 112
C
40 50 70
D
80 103.5 133.0
E
100 140 182
H
M12 M16 M20
E A
TRIFLEX-MTG1088
Compression Characteristics
TRIFLEX-MTG1086
65
TRIFLEX-MTG1087
65
TRIFLEX-MTG1088
65
3.0
0.8
55
8.0
Load (kN)
Load (kN)
Load (kN)
45
2.0
55 45
55 45
1.0
35
0.0 0 1 2 3 4 5
0.0 0 1 2 3 4 5 6
Deflection (mm)
Deflection (mm)
Deflection (mm)
Note: There is a possible deviation of 20% in the above load/deflection graphs due to production and hardness
Stiffness Ratio
The design of the Triflex 2 mountings provides different degrees of stiffness in the three main axes, vertical, longitudinal and lateral.
Vertical Stiffness
Direction of normal load
Crankshaft Direction
For GMT Triflex Type 2 mountings, the recommended orientation for installation is as detailed below: .
Type 2
nk ra
a sh
ft
Adjustable Studs
GMT Adjustable studs are available in 3 main sizes and are suitable for use with the Triflex mounting range where height adjustment is required.
A
Part No.
STUD-M2196 STUD-M2197 STUD-M2198
A
M12 x 1.75 M16 x 2.0 M20 x 2.5
L (mm)
100 110 150
D (mm)
44.0 56.0 72.0
D
GMT RUBBER-METAL-TECHNIC LTD. The Sidings, Station Road, Guiseley, Leeds, West Yorkshire, LS20 8BX, U.K.
Page: 9.2
Version 9.1
Website: www.gmt.gb.com
TRIFLEX-MTG2019
22.0
TRIFLEX-MTG2218
6.0 14.0 111.0 22.0
M24
190.0
135.0 CRS
M24x3.0
190.0
Compression Characteristics
TRIFLEX-MTG2019/MTG2218 VERTICAL
20
70 60
TRIFLEX-MTG2019/MTG2218 LATERAL
8
70 60
220.0
TRIFLEX-MTG2019/MTG2218 LONGITUDINAL
25
70 60
Load (kN)
Load (kN)
6
50
Load (kN)
15
50
20 15 10 5 0
50
10 5 0 0 2 4 6
Deflection (mm)
Deflection (mm)
Deflection (mm)
Note: There is a possible deviation of 20% in the above load/deflection graphs due to production and hardness tolerances
GMT RUBBER-METAL-TECHNIC LTD. The Sidings, Station Road, Guiseley, Leeds, West Yorkshire, LS20 8BX, U.K.
Page: 9.3
Version 9.1