Documente Academic
Documente Profesional
Documente Cultură
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Contents:
Series Rod thermostats
Series STMA Series STM-RW-2 for flue gas temperature monitoring
Thermostats
Data Sheet
60.1530 60.1540
Panel-mounting thermostats
Types ETHf-20(STW) and ETHf-70 (STB) Series EM Series EM up to +650C Type EMf-80 (STB) Type 602030/01 (TR) JUMO heatTHERM Type 602031/80 (STB) JUMO heatTHERM Types KMf-20 (STW) and KMf-70 (STB) 60.2010 60.2021 60.2025 60.2026 60.2030 60.2031 60.2045
Surface-mounting thermostats
Series ATH als single thermostats Series ATH as twin thermostats Series ATH.-SE- for monitoring installations on seagoing ships Series ATH-SW, Protection IP65 Series AM as surface-mounting thermostats (prices on request) Series AMHs-1-80 as heating thermostat (prices on request) Series AMTHF, with 2, 3 or 4 single-pole snap-action switches JUMO heatTHERM-AT as surface-mounting/room thermostat 60.3021 60.3026 60.3031 60.3035 60.3041 60.3045 60.3051 60.3070
02.08/00403730
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Data Sheet
60.4514
Ex thermostats
for application in hazardous areas Series ATHf-Ex Series ATHf-EXx 60.5041 60.5051
Electronic thermostats
Series TE Resistance thermometer 60.5501 60.5521
Accessories
Temperature probes, screw fittings and and pockets for thermostats EM, ETH, ATH, AM and heatTHERM Setpoint adjusters (knobs, stops and scales) for panel-mounting thermostats EM and heatTHERM 602030/01 60.6710 60.6715
02.08/00403730
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Switching function
Temperature controller TR and temperature monitor TW When the temperature at the probe exceeds the selected setpoint, the microswitch is operated through the mechanism and the circuit is opened or closed. When the temperature has fallen below the selected setpoint (by the switching differential), the microswitch returns to its initial position. Temperature limiter TB If the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has fallen below the safe temperature limit by about 10 % of span, the microswitch can be reset manually. Temperature limiter TB with Code U The additional make contact can be used as a signal contact.
STMA-1
Types
Types STMA-1 STMA-2 STMA-7 Switching function Temperature controller TR Temperature monitor TW Temperature limiter TB STMA-2
Technical data
Control ranges, switching differential and stem lengths Ranges C -10 to +100 +05 to +160 +00 to +300 +00 to +075 +15 to +120 +05 to +160 +00 to +240 +00 to +080 +00 to +120 +20 to +200 +50 to +300 -80 to +100 +00 to +050 +20 to +150 +00 to +200 -15 to +050 +00 to +040 +00 to +080 Switching differential in C 41 Stem length S 100 mm Active stem length 100 mm
3 0.7
150 mm
150 mm
2.5 0.4
200 mm
200 mm
250 mm 300 mm
250 mm 300 mm
03.07/00073201
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
STMA-7/U microswitch with break contact, lock-out and additional signal contact
max. rating Operating data Switching point accuracy in % Permissible storage temperature Permissible ambient temperature in operation Nominal position (NL) Case Case Cable entry Setpoint adjustment
die-cast aluminium surface with impact-resistant textured paint; cover: RAL 7032, base: RAL 7015 standard: clamping nipple M 20 x 1.5 at extra cost: cable gland M 20 x 1.5 to EN 50 262 CuZn (brass) STMA-1 STMA-2 / STMA-7 switching point adjustable from the outside by turning switching point adjustable by screwdriver the knob after taking off case cover EN 60 529-IP54 approx. 0.65 kg Version Material boss 19 mm dia. between case and stem CuZn (brass) (process connections U, g, b can be retrofitted) screw-in pocket, screw-in spigot Form A to up to 150C nickel-plated brass / above 150C St DIN 3852/2 with fixing screw, stem 12 mm dia. (CrNi at extra cost) loose nipple M 18 x 1 with locknut nickel-plated brass mounting flange galvanized steel fixed screw thread with hexagon, nickel-plated brass 27 a/f, pipe thread G1/2 diameter 9 mm nickel-plated brass 100, 150, 200, 250 und 300 mm
Connection diagrams
STMA-1 / STMA-2 STMA-7 STMA-7 / U
03.07/00073201
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us S Internet: www.jumo.us
Page 3/6
Dimensions
STMA-7 Process connection A, up to +200C STMA-7 Process connection A, up to +300C STMA-2 Process connection U, up to +200C
27 a/f
03.07/00073201
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Dimensions
STMA-1 Process connection b, up to +200C STMA-1 Process connection b, up to +300C
27 a/f 27 a/f
03.07/00073201
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Stock items
Sales No. 60/60000354* 60/60000355* 60/60000361* 60/60000362* 60/60000371* 60/60000372* * model is being phased out Type STMA-1 STMA-1 STMA-1 STMA-1 STMA-2 STMA-2 Control range C +00 to + 075 +00 to + 080 +05 to +160 +00 to +200 +15 to +120 +20 to +200
delivery 3 working days after receipt of order Process connection U G1/2 U G /2 U G /2 U G /2 U G1/2 U G /2
1 1 1 1
03.07/00073201
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
STMA Series Order code 601530 01 02 07 (3) 020 021 015 023 024 010 017 026 037 043 035 028 044 029 030 064 (4) 10 20 54 (5) 00 13 (6) 46 01 20 (7) 100 150 200 250 300 (8) 000 574 715 764 (1) (2) Basic type Rod Thermostat, STMA Series Basic type extensions STMA-1 Temperature controller STMA-2 Temperature monitor STMA-7 Temperature limiter Control / limit ranges Range 0 to + 040C 0 to + 050C -15 to + 050C 0 to + 075C 0 to + 080C -80 to + 100C -10 to + 100C 0 to + 120C +15 to + 120C +20 to + 150C +85 to + 160C 0 to + 200C +20 to + 200C 0 to + 240C 0 to + 300C +50 to + 300C 2 TR with changeover contact TW with changeover contact TB with break contact Stem length 300 mm 250 mm 250 mm 150 mm 200 or 300 mm 200 mm 100 mm 200 mm 150 mm 250 mm 100 or 150 mm 250 mm 200 mm 150 mm 100 mm 200 mm
Process connection A = plain cylindrical probe U = screw-in pocket D = fixed screw thread with hexagon 2 Thread for process connection no thread (process connection A) external thread G 1/2 Material of process connection CuZn (brass) St (steel) 2 CrNi (stainless steel) with process connections A, U and D only with process connection U only with process connection U only
Fitting length S (stem length)* 100 mm 2 150 mm 200 mm 250 mm 300 mm * please note the relationship of control range to stem length! Extra codes 1 no extra code U TB with break contact, lock-out + additional signal contact (for basic type STMA -7 only) g loose nipple M 18 x 1 with locknut b mounting flange
/ /
(2) .. 02
(4) .. 20
(5) .. 13
(6) .. 46
/ /
...
03.07/00073201
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Brief description
The flue gas temperature monitor is used for monitoring flue gas temperatures of solid-fuel boilers in dual operation with oil-heated boilers. It is also employed for the interlocking of ventilation systems that cause a vacuum in conjunction with tiled ovens and fireplaces. The flue gas temperature monitor operates on the principle of rod expansion. The immersion tube and the metal rod mounted inside have different expansion coefficients, so that changes in temperature produce differences in length. These act through a transmission mechanism on a microswitch which is actuated above a set temperature limit. After the immersion tube has cooled down by about 10 to 30 C, the microswitch is reset. In the event of an immersion tube break, the circuit remains permanently open.
Technical data
Electrical data Switching device STM-RW-2 1-pole microswitch with changeover (SPDT) contact Max. permissible contact rating Contact reliability Rated surge voltage Overvoltage Category II Operating data Limit range Switching differential as standard: special version: Limit range +40C to +120C +20C to +400C Switching point accuracy referred to switch-off point Time constant Mean ambient temperature error Permissible ambient temperature Setpoint adjustment Permissible storage temperature Nominal position (NL) Housing Housing Cable entry Enclosure protection Weight Process connection Connection circuit Immersion tube Form DZ, G 1/2 (fixed hexagon with external thread G 1/2), material: steel 15 x 150 mm, material: steel as standard: at extra cost: die-cast aluminium housing with lead-sealable screws clamping nipple M 20 x 1.5, for 8 10 mm cable dia. cable gland M 20 x 1.5 to EN 50 262 CuZn IP54 to EN 60 529 approx. 0.8 kg Limit range +40C to +120C +20C to +400C STM-RW-2/OS microswitch with 2 separate circuits 1 x break (SPST-NC) and 1 x make (SPST-NO)
10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% To ensure maximum switching reliability, we recommend a minimum loading of: 20 mA, 24 V AC/DC 1500 V (via the switching contacts: 400 V) required fusing, see max. contact rating +40C to +120C (factory-set to +100C) +20C to +400C (factory-set to +120C) STM-RW-2 10 to 18 C 10 to 22 C Scale start +0/-10 C +0/-15 C flue gas: 45 sec switching point displacement referred to deviation from +22C ~ 0.07 C/C at probe: at switch head: +700C max. +080C max., -50C min. against internal scale, after removing housing cover +80C max. / -50C min. to DIN 16 257, NL 0 NL 90 (other NL on request) STM-RW-2/OS 10 to 30 C 10 to 40 C Scale end +0/-10 C +0/-20 C
01.07/00073204
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
Dimensions
* 27a/f
Connection diagrams
Stock items
Sales No. 60/60000903 60/60001115 60/60000904 Type STM-RW-2 STM-RW-2 STM-RW-2/OS Limit range C +40 to +120 +20 to +400 calibration point +120 +40 to +120 10-18 10-30 Switching differential C
(shipment: 3 working days after receipt of order) Connection Immersion tube length mm
150
Order details
STM-RW-2 Series Order code 601540 (1) Basic type (basic version) STM-RW-2 Rod thermostat with microswitch as flue gas temperature monitor (ATW) with changeover (SPDT) contact Control/limit ranges +40 to + 120C +20 to + 400C Extra code OS no extra code microswitch with 2 separate circuits, 1 x break (SPST-NC) and 1 x make (SPST-NO)
(2) 056 045 (3) 000 729 Order code (1) 601540 Order example 601540 01.07/00073204
/ /
/ /
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Brief description
ETH panel-mounting thermostats monitor thermal processes. The instruments can be supplied as safety temperature monitors STW (STB) and safety temperature limiters STB. In the event of a fault, the STB sets the system being monitored to a safe operational state. Panel-mounting thermostats operate on the principle of fluid expansion, with a microswitch serving as the electrical switching element.
ETHf-20
Switching action
Safety temperature monitor STW If the temperature at the probe exceeds the set limit, the circuit is opened by a snap-action switch. If the temperature falls below the set limit (by the switching differential), the switch returns to its initial position. Lock-out facility on the safety temperature limiter STB If the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has fallen by about 10 % of span below the safe temperature limit (approx. 15% for limit setting > +350C), the microswitch can be reset manually. Use of the safety temperature monitor STW as safety temperature limiter STB The circuitry to which the thermostat is connected must comply with DIN 3440 and VDE 0116. Self-monitoring on the safety temperature limiter STB and the safety temperature monitor STW (STB) Failure of the measuring system, i.e. a leakage of the expansion fluid, will cause the pressure under the diaphragm to drop, thus permanently opening the circuit. Resetting is no longer possible. If the temperature at the probe cools down to below -20C approx., the circuit will also be opened. As the temperature rises to above -20C approx., the STB has to be reset manually. On the STW (STB), the reset is performed automatically.
ETHf-70
You will find the Declarations of Conformity at: www.jumo.net vProducts vData Sheet 60.2010 or ask for them to be sent.
01.06/00073220
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Technical data
Control ranges and temperature probes Type Control/ limit setting ranges in C +30 to +110 +60 to +130 +20 to +150 +50 to +250 +50 to +300 +20 to +400 +20 to +500 +20 to +500 liquid-filled Max. permissible Maximum probe temperature capillary length in C in mm 135 150 175 290 345 460 550 550 Probe length L in mm Probe dia. d in mm, dia. 6 = standard 6 8 075 108 079 116 060 077 049 064 --055 176 127 202 106 081 119
ETHf-20 ETHf-70
5000
Capillary and temperature probe Type ETHf- . . End of scale up to 200C Capillary Temperature probe copper (Cu) copper (Cu) Mat. Ref. 2.0090 1.5mm dia. brazed Mat. Ref. 2.0090 stainless steel (CrNi) copper (Cu) Mat. Ref. 1.4571 1.5mm dia. brazed Mat. Ref. 2.0090 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 standard 1000 mm, max. 5000 mm 5 mm Note
up to 350C
up to 500C
up to 350C
at extra cost
Capillary length Min. bending radius of capillary Electrical data Switching element ETHf-20 microswitch with changeover contact
ETHf-70/U microswitch with break contact, lock-out and additional signal contact
Max. current rating 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% with differential 2% 6 (1.2) A, 230 V AC +10%, p.f. = 1 (0.6) gold-plated microswitch, code /au 0.1 A, 24 V AC / DC contact resistance 2.5 10 m
Operating data Switching differential in % of control / limit setting range Switching action STW (STB) Nominal value 5 9 2 7 9 2 Switching point accuracy in % of limit setting range 01.06/00073220 with liquid-filled measuring system Possible actual value 4 max. 6 8 max. 11 1 max. 3 with gas-filled measuring system 5 max. 12 8 max. 16 1.5 max. 3
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
A deviation of the ambient temperature at the thermostat head from the 22C calibration ambient temperature produces a shift of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point Panel-mounting thermostats with end of scale < 200C 200C 350C > 350C 500C due to thermostat head, % per C 0.17 0.13 0.12 due to capillary, % per C per m length 0.054 0.11 0.03 -50 to +50C
Permissible storage temperature Permissible ambient temp. in operation Nom. position (NL) Thermostat head Chassis material Fixing Scale span Electr. connection Limit setting Protection Weight Process connection1 ETH- Series with capillary
zinc-plated steel 2 screws M 3, 22 mm spacing 250 screw terminals up to 2.5 mm2 conductor cross-section The limit can be adjusted at the setpoint spindle prior to mounting, by using a screwdriver. EN 60 529-IP00 approx. 0.2 kg
plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe up to +150C: CuZn (nickel-plated) as standard above +150C: St as standard (CrNi on request) standard lengths: 100, 120, 150, 200 or 300 mm (other lengths on request) D = 8 mm
See data sheet 60.6710 for additional process connections and pockets.
Note Physical and toxicological properties of the expansion fluid which may escape in the event of a system fracture. Control range with end of scale C Dangerous reactions no no no Fire and explosion hazard Ignition Explosion temp. C limit % v/v + 355 0.6 8 + 490 -no no Water contamination yes yes no irritant yes yes no Toxicological data danger to health
1 1
toxic no no no
no
At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, e.g. after a fracture of the measuring system.
01.06/00073220
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Dimensions
ETHf-70, with plain cylindrical probe A, no pocket
ETHf-20
ETHf-70
Connection diagrams
01.06/00073220
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
ETH Series Order code 602010 20 70 (3) 052 066 043 063 064 045 046 (4) 00 20 50 70 90 (5) 1000 2000 3000 4000 5000 .... (6) 40 20 (7) 10 20 (8) 00 13 (9) 00 46 01 20 000 100 120 150 200 300 .... (1) (2) Basic type Panel-mounting thermostat, ETH Series Basic type extensions ETH-20 Safety temperature monitor STW with capillary ETH-70 Safety temperature limiter STB with capillary Control/limit ranges +30 to +110 +60 to +130 +20 to +150 +50 to +250 +50 to +300 +20 to +400 +20 to +500 Switching differential no differential (ETHf-70 STB) 2% of scale span 5% of scale span 7% of scale span 9% of scale span Capillary length 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text) Material of capillary Cu(copper) CrNi(stainless steel 1.4571)) Process connection1 A = plain cylindrical probe U = screw-in pocket Thread for process connection 1 no thread (process connection A) external thread G 1/2 Material of process connection with process connection A only CuZn (brass) St (steel) CrNi (stainless steel 1.4571)
(10) Fitting length S (immersion tube length) no pocket 100mm 120mm 150mm 200mm 300mm . . . . special length, details in plain text ...continued on next page
01.06/00073220
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
ETH Series Order code 00 08 10 6 8 000 574 702 (11) Diameter D (immersion tube dia.) no pocket 08 mm 10 mm (12) Diameter d (probe dia.) 6 mm 8 mm (13) Extra codes 2 no extra code U STB with (n.c.) break contact, lock-out and additional signal contact au snap-action switch, gold-plated
/ /
(2) .. 70
(4) .. 00
(5) - ....
(6) .. 40
(7) .. 10
(8) .. 00
(9) .. 00
, ...
- 1000 -
See data sheet 60.6710 for other probe mountings and pockets. List extra codes in sequence, separated by commas.
01.06/00073220
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/12
Switching action
Temperature controller TR and temperature monitor TW When the temperature at the probe exceeds the selected setpoint, the microswitch is actuated through a mechanism and the circuit is opened or closed. When the temperature drops below the selected setpoint (by the amount of the switching differential), the micro- switch returns to its initial position. Lock-out facility on the temperature limiter TB and protection temperature limiter STB When the temperature at the probe exceeds the set limit, the circuit is opened and the miroswitch locked out mechanically. After the temperature has dropped below the critical temperature by about 10 % of the scale span (approx. 15% for a limit setting above + 350C), the microswitch can be reset manually. With limits above 120C, the limit setting on the STB must be locked (e.g. by a seal) to prevent any shift. Self-monitoring facility on the protection temperature limiter STB and safety temperature monitor STW (STB) In the case of the STB and STW (STB), any failure of the measuring system, i.e. a leakage of the expansion liquid, will cause the pressure under the diaphragm to drop, thus permanently opening the circuit. Resetting is now impossible. When the temperature at the probe drops below -20C (approx.), the circuit will also open, but will close again automatically when the temperature rises above -10. Use of the safety temperature monitor STW as a protection temperature limiter STB The circuitry to which the thermostat is connected must comply with DIN 3440 and VDE 0116.
Approvals DVGW
Gas Appliances Directive 90/396/EEC Type EM-50 only Pressure Equipment Directive 97/23/EC CE0036 only Types EM-20 EM-30 EM-40 EM-50
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/12
DIN approved up to +500C max. The DIN Reg. No. becomes invalid if pockets are used that are not listed in our Data Sheet 60.6710. Type EM-50 DVGW Reg. No. CE-0085 AR 0124 *Setpoint / limit permanently set at the factory to customer requirements
Technical data
Table of control ranges and probes for TR, TW, TB liquid-filled Control/limit range C -20 to +040 Switching differential % 1,0 2.5 5,0 7,0 1,0 2.5 5,0 7,0 1,0 2.5 5,0 7,0 1,0 2.5 5,0 7,0 1,0 2.5 5,0 7,0 1,0 2.5 5,0 1,0 2.5 1,0 2.5 1,0 2.5 5,0 1,0 2.5 Max. probe temperature C +050 +050 +095 +100 +060 +060 +105 +110 +115 +115 +140 +175 +125 +125 +165 +200 +135 +135 +170 +200 +173 +173 +200 +230 +230 +230 +230 +228 +228 +300 +345 +345 Max. switch head temperature C +050 +050 +050 +050 (80) +060 (00)0) +060 (00)0) +060 (80)1) +060 (80)1) +080 (00)0) +080 (00)0) +100 (00)0) +100 (00)0) +080 (00)0) +080 (00)0) +100 (00)0) +100 (00)0) +080 (00)0) +080 (00)0) +100 (00)0) +100 (00)0) +080 (00)0) +100 (00)0) +100 (00)0) +080 (00)0) +100 (00)0) +080 (00)0) +100 (00)0) +080 (00)0) +100 (00)0) +100 (00)0) +080 (00)0) +100 (00)0) (00)0) (00)0) (80)1) 1) Max. capillary length m 5 3 3 5 5 1 1 5 5 2 2 5 5 2 2 5 5 1 1 1 1 1 5 2 Max. contact spacing C 005 008 025 050 005 010 025 050 007 014 035 070 010 020 050 100 008 016 040 080 015 030 075 020 040 015 030 020 040 100 025 050 Probe length L in mm, probe dia. d in mm, 6 mm dia. is standard 6 8 245 145 245 145 138 091 103 073 283 165 165 283 159 101 117 080 210 127 127 210 121 082 091 067 157 100 100 157 094 068 073 058 188 116 188 116 110 076 084 063 113 078 113 078 072 057 113 139 105 105 064 087 078 092 070 070 049 061
-20 to +050
+20 to +090
+20 to +100
+30 to +110
+30 to +150 +30 to +200 +50 to +200 +50 to +250 +50 to +300
1)
Values in brackets to special order only, taking into account operating conditions and capillary lengths
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/12
Technical data
Table of control ranges and probes for TR, TW, TB gas-filled Control/limit range C +20 to +400 +20 to +500 Switching differential % 06 10 3/5 06 10 Max. probe temperature C +460 +500 +530 +575 +575 Max. switch head temperature C +100 +100 +080 +100 +100 Max. capillary length m 5 1 5 5 Max. contact spacing C 075 200 048 095 250 Probe length L in mm, probe dia. d in mm, 6 mm dia. is standard 6 8 237 137 127 081 278 158 176 106 095 065
Control ranges and temperature probes for STB and STW (STB) liquid-filled Setting range C +75 to +100 +85 to +110 +120 to +150 +160 to +200 +210 to +250 +250 to +300 Scale span 78 78 77 79 71 79 Max. probe temperature C +125 +135 +173 +100 +230 +288 +345 5 Max. switch head temperature C Max. capillary length m Tolerance at limit C +0 -7 +0 -7 +0 -9 +0 -12 +0 -13 +0 -16 Probe length L in mm, probe dia. d in mm, 6 mm dia. is standard 6 8 84 63
80 64 61 55
57 49 47
Control ranges and temperature probes for STB and STW (STB) gas-filled Setting range C +300 to +400 +350 to +500 Scale span 70 72 Max. probe temperature C +460 +100 +575 3 Max. switch head temperature C Max. capillary length m Tolerance at limit C +0 -23 +0 -29 Probe length L in mm, probe dia. d in mm, 6 mm dia. is standard 6 8 148 127 92 81
On thermostats with factory-set switching points, please specify the switch-off point in addition to the control range, e.g. control range +80 to +100C, fixed at +95C. Capillaries and temperature probes Type EM- . . End of scale up to 200C Capillary Temperature probe copper (Cu) copper (Cu) Mat. Ref. Cu-DHP 1.5mm dia. brazed Mat. Ref. Cu-DHP stainless steel (CrNi) copper (Cu) Mat. Ref. 1.4571 1.5mm dia. brazed Mat. Ref. Cu-DHP stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 stainless steeel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 standard: 1000 mm, max. 5000 mm 5 mm Notes
up to 350C
up to 500C
up to 350C
at extra cost
Note If the maximum permissible temperature at the probe, capillary and switch head is not fully utilized, it may be possible to increase the capillary length there where it is restricted to 1, 2 or 3 m according to the control range and probe table. Please let us know the actual temperatures to which the thermostat is exposed.
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/12
EM-40/U EM-50/U
microswitch with (n.c.) break contact and lock-out (n.c.) break contact terminal 2 16 (3) A, 230 V AC +10% p.f. = 1 (0.6) 0.25 A, 230 V DC +10%
microswitch with (n.c.) break contact, lock-out and additional signal contact (n.o.) make contact terminal 4 8 (1.5) A, 230 V AC +10% p.f. = 1 (0.6) 0.25 A, 230 V DC +10% 2 (1) A, 230 V AC +10% p.f. = 1 (0.6) 0.25 A, 230 V DC +10%
6 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% microswitch, gold-plated, extra code au 0.1 A, 24 V AC/DC To ensure the maximum switching reliability, we recommend a minimum load of: with silver contacts: with gold-plated contacts (code au): AC/DC = 20 mA, 24 V AC/DC = 10 mA, 10 V 1500 V (400 V via the switching contacts) II standard extra code X see Contact rating faston connectors A 6.3 x 0.8 DIN 46 244 screw terminal up to 2.5 mm2 conductor cross-section (at extra cost) also suitable for retrofitting
Operating data Switching differential in % of control/limit range Switching action TR, TW Nominal value 2.5 5 7 1 with liquid-filled system Possible actual value 2.5 max. 3.5 5 max. 6 7 max. 8 1 max. 2 with gas-filled system 5 5 max. 11 6 6 max. 14 10 10 max. 16 3 2.5 max. 4 with liquid-filled system 5 5 max. 7 with gas-filled system 6 6 max. 16 contact spacing of scale span
standard on request on request at extra cost standard on request on request at extra cost standard
STW (STB)
standard switching point accuracy of contact spacing of minimum maximum scale span 1% 1% according to 1% 2.5% 1% control range table 1% 3%, 5% 2% < 2% 6%, 7%, 10% 3% < 3% The contact spacing is specified in C against the setpoint of contact I. (The contact number is marked on the back of the housing.) sign - = switching before the setpoint sign + = switching after the setpoint For simultaneous switching, specify contact spacing 0.
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/12
in upper third of scale or at limit TR 1.5% 3,0% 4,0% TW +0 / -3% +0 / -6% +0 / -8% TB +0% -5% STB, STW (STB) see table of control ranges and probes, page 3 Deviation of the ambient temperature at the switch head and/or capillary from the +22C calibration ambient temperature produces a switching point shift: higher ambient temperature = lower switching point lower ambient temperature = higher switching point for temperatures with end of scale/limit < 200C 200C 350C 400C 500C TR, TW, TB STW TR, TW, TB STW TR, TW, TB STB STB STW, STB switching differential in % 1 / 2.5 5 7 7/-1 / 2.5 5 7/-3/5 6 10 ambient temperature effect on switch head, % per C 0.15 0.26 0.34 0.43 0.12 0.21 0.35 0.12 0.17 0.24 ambient temperature effect on capillary, % per C per m length 0.05 0.09 0.04 0.07 0.05 Switching action * for detailed information, see diagram on page 8 permissible storage temperature: -50 to +50C permissible ambient temperature in operation: +80C max. unrestricted
Switching differential liquid-filled gas-filled 1%, 2.5% 5% 3%, 5% 7% 6%, 10% 1%, 2.5% 5% 3%, 5% 7% 6%, 10%
Housing Housing in galvanized steel sheet Setpoint adjustment by 2 M3 screws, spaced 22 mm by 2 M4 screws, spaced 28 mm by 2 M3 screws, spaced 33 mm central fixing M 10 x 1 with cap nut (on TB and STB only) TR: TW, TB, STB, STW (STB): switching point externally adjustable by rotary knob switching point adjustable with screwdriver Types EM-3, EM-4, EM-33, EM-44, EM-444, EM-3333, EM-30, EM-40 permanently set at the factory to customer requirements see Data Sheet 60.6715 standard: 250 (for STB and STW (STB), see table of control ranges and probes, page 3) EN 60 529-IP00 approx. 0.3 kg standard fixing code b1 code b2 code b7
Process connection* EM Series with capillary plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe pocket U up to +150C: CuZn is standard above +150C: St is standard (CrNi on request) standard lengths: 100, 120, 150, 200 or 300 mm (other lengths on request) D = 8 mm, D = 10 mm
*See Data Sheet 60.6710 for additional process connections and pockets.
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/12
EMF-13 EMF-23 EMF-33 Setpoint: I Follow-on contact: II EMF-133 EMF-233 EMF-333 Setpoint: I Follow-on contact: II, III EMF-1333 EMF-2333 EMF-3333 Setpoint: I Follow-on contact: II, III, IV
EM-4/U EM-5/U
EM-40 EM-50 I =break contact on system fracture and T < -10C: I II =limit: II EM-40/U EM-50/U I =break contact on system fracture and T < -10C: I II =limit: II
1 4 I
2 II
Example: EMF-1334 For other type variants, the connection diagrams have to be appropriately combined.
EM-20 EM-30 I =break contact on system fracture and T < -10C: I II =limit: II
1 4
J
II
2 4
Dimensions
EM-1 EM-2 EM-3 EM-4 EM-5
B 22 28 33
G M3 M4 M3
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/12
B 22 28 33
G M3 M4 M3
B 22 28 33
G M3 M4 M3
B 22 28 33
G M3 M4 M3
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 8/12
Note: Additional graphics of the temperature compensation TK with higher end-of-scale values and for the EM 2-pole version are available on request.
Note Physical and toxicological properties of the expansion media that may escape in the event of a system fracture. Control range with end of scale C Dangerous reactions Fire/explosion hazard Ignition Explosion temperature limit C % v/v + 355 0.6 0.8 + 490 -no no Water contamination irritant yes yes no Toxicological data danger to health
1 1
toxic no no no
200 +350
> 350 +500
1
< +200
no no no
yes yes no
no
At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentration, e.g. after a fracture of the measuring system.
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 9/12
Stock items
Sales No. 60/60001231 60/60000492 60/60001142 60/60000493 60/60000215 60/60000494 60/60000219 60/60000285 60/60000921 60/60000217 60/60001141 60/60000220 60/60000216 60/60000495 60/60000923 60/60002119 60/60002083 60/60000214 60/60000497 60/60000213 60/60001380 60/60002120 60/60002084 60/60002112 60/60000924 60/60000929 60/60000211 60/60002085 60/60002244 60/60002245 Type EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-1 EM-2 EM-2 EM-2 EM-2 EM-2 EM-2 EM-2 EM-5 EM-5 EM-5 EM-5 EM-50/U,b7 EM-50/U,b7 Control range C - 20 to + 40 0 to + 50 + 20 to + 90 + 20 to + 90 0 to +100 0 to +100 0 to +100 + 30 to +110 0 to +150 0 to +150 0 to +200 0 to +200 + 50 to +250 + 50 to +300 + 50 to +300 + 20 to +400 + 20 to +500 0 to + 50 0 to +150 0 to +150 + 50 to +300 + 20 to +400 + 20 to +500 +20 to +500 0 to +150 0 to +200 + 50 to +300 + 20 to +500 +300 to +400 +350 to +500 Switching differential % 2.5 2.5 2.5 7.0 1.0 2.5 2.5 7.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 6.0 5.0 2.5 2.5 2.5 2.5 6.0 5.0 6.0 2.5 2.5 2.5 4.0
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 10/12
013 021 041 025 052 027 028 062 063 064 045 046 075 085 090 091 092 094 095 096 000
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 11/12
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 12/12
Contact spacing for 2-, 3- and 4-pole termostats details in plain text (e.g. +2C, +5C, +8C)
(3) ...
(4) ...
(5) ..
(6) - .... -
(7) .. 40
(8) .. 10
(9) .. 00
...
...
Order example 602021 / 0005 - 052 - 000 - 00 - 2000 ** List extra codes in sequence, separated by commas.
, 710
08.06/00073206
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
Types
EM-5/TK Temperature limiter (TB) Lock-out on the TB and STB When the temperature at the probe rises above the set limit, a snap-action switch is actuated and mechanically locked out. When the temperature has fallen below the limit by about 100 C, the snapaction switch can be manually reset.
EM-50/TK Protection temperature limiter (STB) Self-monitoring on the STB When the temperature probe cools down to below -10C, the snap-action switch will also be actuated. After the temperature has risen, the circuit will be reclosed automatically. In the event of a measurement system break (leak), the snap-action switch will be permanently operated and will remain locked out mechanically.
Switching action
TW When the temperature at the probe rises above the set limit, the circuit is opened by a snap-action switch. When the temperature has fallen below the set limit (by the amount of the switching differential), the switch returns to its initial position.
Technical data
Limit ranges TW and TB STB Control/limit range C +230 to +650 +500 to +650 Switching differential C 50 80 (TW) Scale span 250 70
*see Data Sheet 60.6710 for other process connections (B, C and D only).
12.06/00376538
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Electrical data
Switching device: single-pole snap-action switch Contact rating EM-2/TK microswitch with changeover contact EM-5/TK EM-50/TK microswitch with (n.c.) break contact and lockout Break contact terminal 2 EM-5/TK/U0 EM-50-TK/U microswitch with (n.c.) break contact, lockout and additional signal contact Make contact terminal 4
Switching action TW
TB, STB
8 (1.5) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% 2 (1) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10%
Contact reliability Rated surge voltage Overvoltage category Fusing required Electrical connection
To ensure the highest possible switching reliability, we recommend a minimum loading of:
AC / DC = 24 V, 20 mA
1500 V (via switching contacts: 400 V) II see Contact rating standard extra code X faston connector A 6.3 x 0.6 DIN 46244 screw connection up to 2.5mm2 conductor cross-section (at extra cost) also suitable for retrofitting
Operating data
Switching point accuracy (in % of scale span, referred to setpoint or limit value at Ta +22C, with rising temperature) Switching action TW TB STB Mean ambient temperature effect (referred to limit) Type EM-2/TK EM-5/TK, EM-5/TK/U EM-50/TK, EM-50/TK/U Accuracy in upper third of scale or at limit
Any deviation of the ambient temperature [t] at the switch head and capillary from the +22C calibration ambient temperature will result in a shift of the switching point tV: higher ambient temperature = lower switching point lower ambient temperature = higher switching point on switch head: tV = 0.06 t on capillary: tV = 0.33 t m If the operating temperature at the switch head and capillary deviates appreciably from the +22C calibration ambient temperature, this can, on request, be taken into account during the calibration (at extra cost).
in operation at the switch head and capillary max. +100C / min. -40C at the probe max. +750C / min. -40C unrestricted
Housing
Material Fixing galvanized steel standard: with two M3 screws, 22 mm spacing extra code b1: with two M4 screws, 28 mm spacing extra code b2: with two M3 screws, 33 mm spacing extra code b7: central fixing M10 x 1 with cap nut (TB and STB only) Limit setting Protection Weight switching point adjustable with screwdriver EN 60 529-IP00 approx. 0.3 kg
12.06/00376538
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Connection diagrams
1 1
2 4
2 4 II
4 I
II
2 4
4 I
EM-2/TK
EM-5/TK
EM-5/TK/U
EM-50/TK
EM-50/TK/U
Dimensions
C 250 )
21
B 38 29 1.5
21
15
39 8 115
21
15
B 1.5 38
C 70 )
21
115
52
II
Rear view
EM-50/TK
Rear view
EM-2/TK EM-5/TK
11
48
39
22 mm M3 28 mm M4 33 mm M3
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
+230 to +650
Non-stock items
Order code 602025 (2) 0002 0005 0050 (3) 093 097 (4) 1000 2000 3000 .... (5) 10 (1) Basic type Panel-mounting thermostat, EM Series up to +650C Basic type extension EM-2/TK0 temperature monitor EM-5/TK0 temperature limiter EM-50/TK protection temperatur limiter Control / limit ranges +230 to +650C (TW and TB only) +500 to +650C (STB only) Capillary length (details in mm) 1000 mm 2000 mm 3000 mm special length, details in mm (3000 mm max.) Process connection * A = plain cylindrical probe * see Data Sheet 60.6710 for other process connections and pockets (B, C and D only) (6) 8 (7) 000 574 699 704 705 Diameter d (probe diameter) 8 mm Extra codes1 no extra code U TB / STB with break contact, lock-out and additional signal contact X screw connection up to 2.5 mm2 conductor cross-section b1 switch head mounting by 2 M4 screws, 28 mm spacing b2 switch head mounting by 2 M3 screws, 33 mm spacing
707
710
TK temperature compensation
b7 central fixing with cap nut (TB and STB only)
Order code (1) 602025 / (2) .. (3) ... (4) .... (5) .. (6) . / (7) ...
0050
097
1000
10
7101
12.06/00376538
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Panel-mounting Thermostats
EM Series as: Protection temperature monitor STW (STB) Protection temperature limiter STB tested to DIN 3440 and Pressure Equipment Directive 97/23/EC
Brief description
Panel-mounting thermostats monitor thermal processes. The thermostats are available as protection temperature monitors STW (STB) and protection temperature limiters STB. In fault condition, the STB sets the system being monitored to a safe operational state. Panel-mounting thermostats operate on the principle of liquid expansion. The electrical switching device is a microswitch.
Switching action
Protection temperature monitor STW (STB) If the temperature at the probe exceeds the selected setpoint, the microswitch is operated via the transmission mechanism and the circuit is opened or closed. If the temperature drops below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position. Lock-out facility on the protection temperature limiter STB If the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has fallen below the critical temperature by about 10 C, the microswitch can be reset manually. Self-monitoring facility on the protection temperature limiter STB and protection temperature monitor STW (STB) If the measuring system fails, i.e. if the expansion liquid has leaked, then the pressure under the diaphragm drops and the circuit is permanently open. The thermostat can no longer be reset. If the probe cools down to a temperature below -20C (approx.), the circuit will also open. When the temperature rises above -10C (approx.), the reset is performed automatically. Use of the protection temperature monitor STW as protection temperature limiter STB The lock-out required by EN 14597 must be ensured by the subsequent circuit. This circuit must comply with EN 50156.
You will find the Declarations of Conformity on the Internet at: www.jumo.net vProducts vData Sheet 60.2026 or ask for them to be sent.
11.06/00073209
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Technical data
Limit range, limit setting and temperature probe Type Limit range Limit setting C +040 to +110 +100 to +150 +110 to +170 +180 to +250 +230 to +300 Using a screwdriver, set the limit on the limit adjuster before installation. limit selectable between +20 and +300 fixed factory setting limit selectable between +60 and +180 fixed factory setting Max. permissible probe temperature C +135 +173 +195 +288 +345 Tolerance at limit C +0/-90 +0/-80 +0/-90 +0/-13 +0/-14 Probe length L for probe dia. d= 6 mm mm 72 85 72 60 60
EM-20-E
EM-30-E
EM-80
Capillary and temperature probe Type EM- . . End of scale up to 200C Capillary copper (Cu) 1.5mm dia. Mat. Ref. Cu-DHP copper (Cu) 1.5mm dia. Mat. Ref. Cu-DHP stainless steel (CrNi) 1.5mm dia. Mat. Ref. 1.4571 Temperature probe copper (Cu) Mat. Ref. Cu-DHP brazed stainless steel (CrNi) Mat. Ref. 1.4571 brazed stainless steel (CrNi) Mat. Ref. 1.4571 welded Notes
up to 300C
up to 300C
at extra cost
Electrical data
Switching device: single-pole snap-action switch Type EM-20-E Type EM-30-E microswitch with changeover contact Type EM-80 standard microswitch with (n.c.) break contact and lock-out (n.c.) break contact terminal 2 230 V AC +10% 10 (2) A, p.f. = 1 (0.6) 0.25 A, 230 V DC +10% Type EM-80 with extra code U microswitch with (n.c.) break contact, lock-out and additional signal contact (n.o.) make contact terminal 4 230 V AC +10% 2 (0.4) A, p.f. = 1 (0.6) 0.25 A, 230 V DC +10% --gold-plated microswitch, 0.1 A, 24 V AC/DC
Contact rating
Contact reliability
To ensure maximum switching reliability, we recommend a minimum loading of: with silver contacts: AC/DC = 24 V, 20 mA with gold-plated contacts (extra code au): AC/DC = 5 V, 5 mA
Rated surge voltage Overvoltage category Required fusing Electrical connection standard extra code X
1500 V (via the switching contacts: 400 V) II see contact rating faston connectors A 6.3 x 0.8 DIN 46 244 screw connection up to 2.5 mm2 conductor cross-section (at extra cost) also suitable for retrofitting
11.06/00073209
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Operating data
Switching differential in % of limit range Mean ambient temperature effect Switching action STW (STB) Nominal value 7 Possible actual value 7-8
in % of scale span, referred to the limit value. A deviation of the ambient temperature at the switch head and/or the capillary from the +22C calibration ambient temperature will result in a shift of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point for temperatures with end of scale / limit value < +200C +200C +350C switching differential in % 7 0.43 0.09 7 0.35 0.07 ambient temperature effect due to the switch head, % per C ambient temperature effect due to the capillary, % per C per meter
STW(STB)
STB
ambient temperature effect due to the switch head: 0.35 C per C ambient temperature effect due to the capillary: 0.07 C per C per meter
Temperature compensation Permissible storage temperature Permissible ambient temperature in operation at switch head and capillary Nominal position (NL) Switch head Housing material Fixing
extra code TK Please see the diagram on page 4 for details. -50 to +50C
+80C max. +18C min. (0C with extra code TK) unrestricted
sheet steel, zinc-plated extra code b1 with 2 M4 screws, 28 mm spacing extra code b2 with 2 M3 screws, 33 mm spacing extra code b3 with 2 M3 screws, 22 mm spacing (standard for EM-20-E and EM-30-E) extra code b7, central fixing M 10 x 1 with cap nut (STB only, standard for EM-80) EN 60 529 - IP00 approx. 0.3 kg
plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe pocket U up to +150C CuZn is standard above +150C St is standard (CrNi on request) standard lengths: 100, 120, 150, 200 or 300 mm (other lengths on request) D = 8 mm
*See data sheet 60.6710 for additional process connections and pockets.
Note: Physical and toxicological properties of the expansion fluid that may escape in the event of a system fracture. Control range with end of scale Dangerous reactions no no Fire and explosion hazard Water contamination Ignition Explosion limit temperature + 355C 0.6 - 8 % v/v yes + 490C -yes irritant yes yes Toxicological data danger to health
1 1
toxic no no
At present, there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentration, e.g. after a fracture of the measuring system.
11.06/00073209
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Connection diagrams
EM-20-E EM-30-E EM-80 EM-80/U
Dimensions
EM-80 with central fixing (standard)
10 a/f 13 a/f
( 1 ) + ( 2 ) = standard: faston connector A 6.3 x 0.8 mm (DIN 46244) ( 4 ) = only with extra code /U; faston connector A 6.3 x 0.8 mm (DIN 46244)
Code b1 b2 b3
B 28 33 22
G M4 M3 M3
Probe temperature C
Ambient temperature C
Ambient temperature C
11.06/00073209
Probe temperature C
Temperature compensation (TK) If the temperature at the switch head deviates from the +22C calibration ambient temperature, this will result in a displacement of the switching point. With ambient temperatures that fluctuate considerably, it is advisable to use thermostats with temperature compensation (code TK).
EM-.. without temperature compensation Switching point deviation as a function of ambient temperature at the switch head, taking into account the probe temperature.
C without temperature compensation
EM-../TK with temperature compensation Switching point deviation as a function of ambient temperature at the switch head, taking into account the probe temperature. The temperature error at the capillary has not yet been allowed for, and may introduce an additional error of approx. 0.07C per C per meter.
C with temperature compensation
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Stock items
Sales No. 60/60000775 60/60000753 Type EM-80 EM-80 Limit C Capillary mm
shipment: 3 working days after receipt of order Process connection Probe dia. x length mm 6 x ~ 84
+ 110 + 095
1000
Order details
EM Series as STW (STB) and STB
Order code 602026 20 30 80 000 055 506 508 575 606 000 .... 1000 2000 3000 4000 5000 .... 40 20 10 20 00 13 00 46 01 20 000 100 120 150 200 300 .... (1) Basic type Panel-mounting thermostat, EM series (2) Basic type extensions EM-20-E Protection temperature monitor, adjustable limit 3 EM-30-E Protection temperature monitor, fixed limit EM-80 Protection temperature limiter, fixed limit (3) Limit ranges for EM-20-E STW (STB) with fixed limit (EM-30-E and EM-80) +040 to +110C +100 to +150C +110 to +170C +180 to +250C +230 to +300C (4) Fixed limits for EM-30-E and EM-80 with adjustable limit range details in C (5) Capillary length 1000 mm 2000 mm 3000 mm 3 4000 mm 3 5000 mm 3 (special length, details in mm, 500 mm min., 5000 mm max.) (6) Material of capillary Cu(copper) CrNi(stainless steel 1.4571) 3 (7) Process connection1 A = plain cylindrical probe U = screw-in pocket (8) Thread for process connection no thread (process connection A) external thread G1/2 (9) Material of process connection only with process connection A CuZn(brass) St(steel) CrNi(stainless steel 1.4571) (10) Fitting length S (immersion tube length) no pocket 100 mm 120 mm 150 mm 200 mm 300 mm (special length, details in mm)
11.06/00073209
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
EM Series as STW (STB) and STB
Order code 00 8 6 000 574 702 699 704 705 706 710 707 (11) Diameter D (immersion tube dia.) no pocket 8 mm (12) Diameter d (probe diameter) 6 mm (13) Extra codes 2 no extra code U STB with (n.c.) break contact, lock-out and additional signal contact au snap-action switch, gold-plated (cannot be combined with code U) X screw connection with 2.5 mm2 conductor cross-section b1 switch head fixing with 2 M4 screws, 28 mm spacing b2 switch head fixing with 2 M3 screws, 33 mm spacing b3 switch head fixing with 2 M3 screws, 22 mm spacing b7 central fixing with cap nut (STB only) TK temperature compensation
(2) ..
(6) .. 40
(7) .. 10
(8) .. 00
(9) .. 00
(11) .. 00
(12) . 6
/ /
See data sheet 60.6710 for additional process connections and pockets. List extra codes in sequence, separated by commas. Special instrument Delivery time.
11.06/00073209
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
JUMO heatTHERM
Type 602030
Temperature controller, as a panel-mounting thermostat Compensated for ambient temperature
Brief description
Thermostats control and monitor thermal processes. The JUMO heatTHERM, Type 602030, is a temperature controller TR. The panel-mounting thermostat operates on the principle of liquid expansion. The electrical switching device is a snap-action switch. The panel-mounting thermostat complies with RoHS and is free from cadmium.
Switching action
Temperature controller TR If the temperature at the probe exceeds the selected setpoint, the snap-action switch is operated via the transmission mechanism and the circuit is opened or closed. If the temperature drops below the selected setpoint (by the amount of the switching differential), the snap-action switch returns to its initial position.
Temperature compensation
A deviation of the ambient temperature at the switch head and capillary from the +22C calibration ambient temperature will result in a shift of the switching point. The temperature compensation reduces this switching point shift to a minimum.
Approvals
DIN Reg. No. Tests
1
TR 116804
You will find the Declarations of Conformity at: www.jumo.net, or ask for them to be sent.
06.06/00415401
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Technical data
Housing Base Fixing Enclosure protection Limit temperatures Nominal position (NL) Weight Scale span Ambient temperature effect Electrical contact Contact type Contact rating sheet steel, zinc-plated black polyester resin compound 2 M4 screws, spaced 28 mm IP00 to EN 60 529 for transport and storage: -50 to +50C in operation: +80C max. unrestricted approx. 0.12 kg 250 A deviation from the ambient temperature at the switch head and capillary from the +22C calibration ambient temperature will result in a switching point shift of about -0.1C/C 1 (measured for the control range +30 to +110C and a capillary length of 3000 mm) snap-action switch with single-pole changeover contact break contact (SPST-NC), contacts 1-2: 16 (2.5) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% make contact (SPST-NO), contacts 1-4: 6.3 (2.5) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% Connection Switching differential Switching point accuracy Switching reliability Accessories Setpoint adjuster Probe length L in mm Control range Probe dia. 4 mm 6 mm +20 to 90C 173 79 +30 to 110C 153 72 +20 to 120C 126 62 0 to 200C 88 -+50 to 250C 88 -+50 to 300C 75 -A 6.3-0.8 to DIN 46244 5 to 11% of control range in upper third of control range: +2/-3%, at the start of the control range: 5% of control range To ensure maximum switching reliability, we recommend a minimum loading of: AC / DC = 24 V, 20 mA Type W8 to data sheet 60.6715
06.06/00415401
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Connection diagram
2 4 1
Dimensions
Stock items
Sales No. 60/60002993 60/60003134 60/60003135 Type Control range C +20 to +90 0 to +200 +50 to +300 Capillary mm 2000
602030
Instrument versions that differ from the stock models are available on request, minimum order quantity: 500 items
06.06/00415401
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
Order details
Panel-mounting thermostat JUMO heatTHERM, type 602030 Order code 602030 01 041 052 042 028 063 064 1000 2000 2500 3000 .... 40 00 13 0 450 ... 10 20 00 13 00 46 01 20 000 100 150 200 300 400 .... Basic type Panel-mounting thermostat JUMO heatTHERM, with single-pole snap-action switch (2) Basic type extension Temperature controller (TR) with changeover contact (3) Control range +20 to +090C +30 to +110C +20 to +120C +00 to +200C +50 to +250C 2 +50 to +300C 2 (4) Capillary length 1000 mm 2000 mm 2500 mm 3000 mm special length (specify in plain text, in 1000 mm steps, max. length: 5000 mm) (5) Material of capillary Cu (copper) 1.25 mm dia. (6) Insulation of capillary without with (7) Insulation length (starting from housing) without 450 mm special length (specify in plain text, in mm, max. length: 800 mm) (8) Process connection (PA)1 A = plain cylindrical probe U = screw-in pocket (9) Thread for process connection no thread (process connection A) external thread G 1/2 (10) Material of process connection only with process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (11) Fitting length S (immersion tube length) no pocket 100mm 150mm 200mm 300mm 400mm special length (specify in plain text) (1)
0 8
4 6 000
(12) Diameter D (immersion tube dia.) no pocket 8 mm (13) Diameter d (probe diameter)
4 mm 6 mm (14) Extra codes (TZ) no extra code Special versions on request! (1) 602030 602030 (2) / / 01 (3) - 052 (4) 2000 (5) 40 (6) 13 (7) - 450 (8) 10 (9) 00 (10) 00 (11) (12) (13) (14) / - 000 - 0 - 6 / 000
see data sheet 60.6710 for additional probe mountings no VDE approval
06.06/00415401
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
JUMO heatTHERM
Type 602031
Protection temperature limiter, as a panel-mounting thermostat Compensated for ambient temperature
Brief description
Thermostats control and monitor thermal processes. The JUMO heatTHERM, type 602031, is a protection temperature limiter STB. The panel-mounting thermostat operates on the principle of liquid expansion. The electrical switching device is a snap-action switch. The panel-mounting thermostat complies with RoHS and is free from cadmium.
Switching action
Protection temperature limiter STB with lock-out and self-monitoring facility If the temperature at the probe exceeds the set limit, the snap-action switch is operated through a transmission mechanism, the circuit is opened and the snap-action switch is locked out mechanically. After the temperature has fallen below the limit by about 10% of the limit value, the snapaction switch can be reset manually. If the probe cools down to below -20C (approx.), the circuit opens but will close again when the temperature rises. Failure of the measuring system, i.e. a leakage of the expansion liquid, will cause the pressure under the diaphragm to drop, thus permanently opening the circuit. The thermostat can no longer be reset.
Temperature compensation
A deviation of the ambient temperature at the switch head and capillary from the +22C calibration ambient temperature will result in a shift of the switching point. The temperature compensation reduces this switching point shift to a minimum.
Approvals
DIN Reg. No. Tests
2 1
STB 116904
PED 97/23/EC
You will find the Declarations of Conformity at: www.jumo.net or ask for them to be sent.
1 limit: 2
12.06/00415410
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Technical data
Housing Base Fixing Enclosure protection Limit temperatures Nominal position (NL) Weight Ambient temperature effect Electrical contact Contact type Contact rating sheet steel, zinc-plated black polyester resin compound M 10x1, with hexagon nut and protective cap IP00 to EN 60 529 for transport and storage: -50 to +50C in use: +80C max. unrestricted approx. 0.12 kg A deviation from the ambient temperature at the switch head and capillary from the +22C calibration ambient temperature will result in a switching point shift of about -0.1C/C 1 (measured at +120C limit, permanently set, and with 3000 mm capillary length) snap-action switch with single-pole break contact (SPST-NC), lock-out and signal contact break contact (SPST-NC), contacts 1-2: 16 (2.5) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% signal contact (contacts 1-4): 2 (0.4) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% gold-plated snap-action switch, code 702: AC / DC 24 V, 0.1A Connection Switching point accuracy Switching reliability A 6.3-0.8 to DIN 46244 see order details, page 4 To ensure maximum switching reliability, we recommend a minimum loading of: AC/DC = 24 V, 20 mA with silver contacts AC/DC = 5 V, 5 mA with gold-plated contacts (code 702)
Probe length L in mm Limit value Probe dia. 4 mm 6 mm 95C 100C 153 72 110C 120C 350C 77 -70 to 130C 118 60 95 to 120C 153 72 120 to 150C 150 to 180C 127 63
Connection diagram
2 4 1
1 2 4
12.06/00415410
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Dimensions
Type: 602031/80
Type: 602031/81
12.06/00415410
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Stock items
Sales No. 60/60002994 60/60002995 60/60003136 Type 602031/80 602031/81 602031/81 Limit C +100 +95 to +120 +70 to +130 Limit setting fixed setting adjustable, notch positions at: +95, +100, +110 and +120C freely adjustable 2000 Capillary mm
Instrument versions that differ from the stock models are available on request, minimum order quantity: 500 items
Order details
Panel-mounting thermostat JUMO heatTHERM, type 602031 Order code 602031 (2) 80 81 (3) (1) Basic type Panel-mounting thermostat JUMO heatTHERM, with single-pole snap-action switch Basic type extensions Protection temperature limiter (STB), permanently set, with break contact (SPST-NC), lock-out and signal contact Protection temperature limiter (STB), adjustable, with break contact (SPST-NC), lock-out and signal contact Limit value Switching point accuracy +0/-15C +0/-5C +0/-10C +0/-10C Max. probe temperature
with fixed limit setting +070 to +130C +095 to +120C +120 to +150C +150 to +180C +155C +145C +175C +210C Max. probe temperature (freely adjustable)1 (adjustable, notch positions 95, 100, 110, 120C)1 (freely adjustable)1 (freely adjustable)1
Fixed limit setting Switching point accuracy with fixed limit setting +095C +100C +110C +120C +350C +0/-5C +0/-5C +0/-5C +0/-5C +0/-20C
000 095 100 110 120 350 ... (5) 1000 2000 2500 3000 .... (6) 40 (7) 00 13
1 2
other limit values up to 350C, specified in C Capillary length 1000 mm 2000 mm 2500 mm 3000 mm special length (specify in plain text, in 1000 mm steps, max. length: 5000 mm) Material of capillary Cu (copper) 1.25 mm dia. Insulation of capillary without with
only with basic type extension 81 see data sheet 60.6710 for additional probe mountings
12.06/00415410
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Order details
Panel-mounting thermostat JUMO heatTHERM, type 602031 Order code 0 450 .... (9) 10 20 (8) Insulation length (starting from housing) none 450 mm special length (specify in plain text, in 1000 mm steps, max. length: 5000 mm) Process connection (PA)2 A = plain cylindrical probe U = screw-in pocket (10) Thread of process connection 00 13 no thread (process connection A) external thread G 1/2 (11) Material of process connection 00 46 01 20 only with process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (12) Fitting length S (immersion tube length) 000 100 150 200 300 400 .... no pocket 100mm 150mm 200mm 300mm 400mm special length (specify in plain text) (13) Diameter D (immersion tube dia.) 0 8
no pocket
8 mm (14) Diameter d (probe dia.)
4 6
000 702
(2) 80
(3) -
(4) -
(5) -
(6) 40 -
(7) 13
(8) - 450 -
(9) 10 -
(10) 00 -
(11) 00
(12) - 000 -
(13) 0 -
(14) / 6
(15) / 000
602031 / 602031 /
only with basic type extension 81 see data sheet 60.6710 for additional probe mountings
12.06/00415410
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Brief description
Panel-mounting thermostats monitor thermal processes. The instrument is available as protection temperature limiter STB. In fault condition, the STB sets the system being monitored to a safe operational state. Panel-mounting thermostats operate on the principle of liquid expansion, with a microswitch serving as the electrical switching device.
Switching action
Lock-out facility on the protection temperature limiter STB If the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch locked out mechanically. After the temperature has dropped below the danger temperature by about 10 % of the span, the microswitch can be reset manually. Self-monitoring facility on the protection temperature limiter STB Failure of the measuring system, i.e. a leakage of the expansion liquid, causes the pressure under the diaphragm of the STB to drop, thus permanently opening the circuit. A reset is now impossible. If the probe cools down to below -20C (approx.), the circuit is also opened. As the temperature rises above -20C (approx.), the STB has to be reset manually, by pressing the reset button.
KM-70
STB
STB 82404
DVGW
Gas Appliances Directive 90/396/EEC CE-0085 AR 0125
01.07/00073218
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Technical data
Control ranges and temperature probe liquid-filled Type Control / limit ranges C +00 to +050 +00 to +100 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250* +50 to +300* Max. permissible probe temperature C 060 115 130 140 150 175 230 290 345 Maximum capillary length mm Probe length L in mm probe dia. d in mm, dia. 6 = standard 6 163 098 115 097 125 082 083 067 057 8 104 070 079 070 084 062 059 051 ---
KM-70
5000
* Probe material stainless steel only Capillary and temperature probe Type KM- . . End of scale up to 200C Capillary copper (Cu) 1.5mm dia. Mat. Ref. 2.0090 copper (Cu) 1.5mm dia. Mat Ref. 2.0090 stainless steel (CrNi) 1.5mm dia. Mat. Ref. 1.4571 Temperature probe copper (Cu) Mat. Ref. 2.0090 brazed stainless steel (CrNi) Mat. Ref. 1.4571 brazed stainless steel (CrNi) Mat. Ref. 1.4571 welded Notes
up to 350C
up to 350C
at extra cost
Capillary length Min. bending radius of capillary Electrical data Switching device KM-70
KM-70 extra code U (574): microswitch with break contact, lock-out and additional signal contact on break contact: 16 A, 400 V AC +10% 16 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% on make contact: 2 A, 400 V AC +10% 2 (1) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10%
extra code O (708) microswitch with break contact and lock-out Rating 16 A, 400 V AC +10% 16 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10%
01.07/00073218
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Permissible ambient temperature in operation Nom. position (NL) Thermostat head Case material Fixing Scale span Electrical connection Limit setting Protection Weight Process connection1 KM- Series with capillary
zinc-plated steel 2 screws M 4, spacing 28 mm 250 extra code X (699): faston connectors A 6.3 x 0.8 mm (DIN 46244), Code X: screw terminals up to 2.5 mm2 conductor cross-section The limit can be set prior to installation, using a screwdriver on the setting spindle EN 60 529-IP00 approx. 0.3 kg
plain cylindrical probe A (as standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe
Material
up to +150C: CuZn (nickel-plated) as standard above +150C: St as standard (CrNi on request) standard lengths: 100, 120, 150, 200 or 300 mm other lengths on request D = 8 mm
See data sheet 60.6710 for additional process connections and pockets.
Note: Physical and toxicological properties of the expansion media that may escape in the event of a system fracture. Control range with end of scale Dangerous reactions no no Fire/explosion hazard Ignition temperature + 355C + 490C Explosion limit 0.6 8 % v/v -Water contamination yes yes Toxicological data irritant yes yes danger to health
2 2
toxic no no
At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, e.g. after a fracture of the measuring system.
01.07/00073218
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Connection diagrams
KM-70 Code O
KM-70 Code U
Dimensions
Type KM-70
(4)
(1)
( 1 ) Start of scale ( 2 ) End of scale ( 3 ) Faston connectors, A 6.3 x 0.6, DIN 46244 ( 4 ) Panel ( 5 ) Reset knob
01.07/00073218
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Stock items
Sales No. 60/60001545 60/60001544 Type KM-70/U KM-70/U Control/limit range +20 to +150C +50 to +300C Capillary mm 1000 1000
Order details
Panel-mounting thermostat KM-70 Series Order (1) Basic type 602045 Panel-mounting thermostat, KM Series (2) 70 (3) 021 025 052 042 066 043 062 063 064 (4) 1000 2000 3000 4000 5000 .... (5) 40 20 (6) 10 20 (7) 00 13 (8) 00 46 01 20 (9) 000 100 120 150 200 300 .... Basic type extension KM-70 Protection temperature limiter STB with break (SPST-NC) contact and capillary Control / limit ranges +00 to +050C +00 to +100C +30 to +110 C +20 to +120 C +60 to +130C +20 to +150 C +50 to +200 C +50 to +250 C +50 to +300C Capillary length (mm) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text) Material of capillary Cu (copper) CrNi (stainless steel 1.4571) Process connection PA1 A = plain cylindrical probe U = screw-in pocket Thread for process connection 1 no thread (process connection A) external thread G 1/2 Material of process connection only for process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) Fitting length S (immersion tube length) no pocket 100mm 120mm 150mm 200mm 300mm . . . . special length, details in plain text
01.07/00073218
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
Panel-mounting thermostat KM-70 Series Order (10) Diameter D (immersion tube dia.) 00 no pocket 08 08 mm 10 10 mm 6 8 000 574 699 (11) Diameter d (probe dia.) 6 mm 8 mm (12) Extra codes 2 no extra code U STB with (n.c.) break contact, lock-out and additional signal contact x screw connection up to 2.5 mm2 conductor cross-section
(2) / / .. 70
(3)
(4) -
(5) .. 40 -
(6) .. 10 -
(7) .. 00 -
(8) .. 00
(10) .. 00 -
(11) . 6 / /
602045 602045
- ... - ....
, ...
- 052 - 1000 -
See data sheet 60.6710 for additional probe mountings and pockets. List extra codes in sequence, separated by commas.
01.07/00073218
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/10
Switching function
Temperature controller TR and operating temperature monitor TW When the temperature at the probe exceeds the set limit, the microswitch is operated through the mechanism and the circuit is opened or closed. When the temperature has fallen below the set limit (by the switching differential), the microswitch returns to its initial position. Lock-out facility on the protection temperature limiter STB When the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has dropped below the safe temperature limit by about 10 % of span (about 15% for limit setting > + 350C), the microswitch can be reset manually. Use of the protection temperature monitor STW as protection temperature limiter STB The circuitry to which the thermostat is connected must comply with DIN 3440 and VDE 0116. Self-monitoring on the protection temperature limiter STB and protection temperature monitor STW (STB) In the case of the STB and STW (STB), failure of the measuring system, i.e. a leakage of the expansion fluid, will cause the pressure under the diaphragm to drop, thus permanently opening the circuit. A reset is now impossible. If the temperature at the probe cools down to below -20C, the circuit will also be opened. As the temperature rises to above -20C, the STB has to be reset manually, by pressing the reset button. On the STW (STB), the reset is performed automatically. ATHs-1
ATHf-70/g
- DIN 3440 - Pressure Equipment Directive 97/23/EC (ATH.-20 and ATH.-70 only)
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/10
Technical data
Control ranges and temperature probes Type Control / limit ranges in C -20 to +050 -10 to +040 +00 to +050 +00 to +070 +00 to +100 +20 to +090 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250 +50 to +300 +50 to +350 +30 to +110 +60 to +130 +20 to +150 +50 to +250 +50 to +300 +20 to +400 +20 to +500 +20 to +500 +20 to +400 +20 to +500 +20 to +500 liquid-filled Max. permissible Maximum probe temperature capillary length in C in mm 060 050 060 080 125 115 135 140 150 175 230 290 345 405 135 150 175 290 345 gas-filled ATH.-1 ATH.-2 ATH.-20 ATH.-70 460 550 550 460 550 550 1000 2000 4000 1000 2000 4000 278 148 202 176 127 202 158 092 119 106 081 119 Probe length L in mm probe dia. d in mm, dia. 6 is standard 6 8 092 141 115 185 115 185 091 138 075 107 091 138 084 125 075 106 090 135 065 088 072 101 054 073 049 063 --053 075 108 079 116 060 077 049 064 --055
ATH.-1 ATH.-2
5000
ATH.-20 ATH.-70
5000
Capillaries and temperature probes Type ATH.- . . End of scale up to 200C Capillary Temperature probe copper (Cu) copper (Cu) Mat. Ref. Cu-DHP 1.5mm dia. brazed Mat. Ref. Cu-DHP stainless steel (CrNi) copper (Cu) Mat. Ref. 1.4571 1.5mm dia. brazed Mat. Ref. Cu-DHP stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm welded Mat. Ref. 1.4571 standard is: 1000 mm, max. 5000 mm 5 mm Note
up to 350C
up to 500C
up to 350C
at extra charge
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/10
microswitch with break contact and lock-out 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10%
Max. rating
with differential 1.5% und 2% 6 (1.2) A, 230 V AC +10%, p.f. = 1 (0.6) microswitch gold-plated, code /au* (*only with switching differential 3%, 5%, 7%) 0.1 A, 24 V AC / DC +10%, contact resistance 2.5 10 m Operating data Switching differential in % of control / limit range Switching function TR, TW liquid-filled measuring system Nominal value Possible actual value 3 3 max. 4 6 6 max. 8 1.5 1 max. 2 gas-filled measuring system 5 4 max. 8 9 8 max. 12 2 1.5 max. 2.5 liquid-filled measuring system 5 4 max. 6 9 8 max. 11 2 1 max. 3 gas-filled measuring system 7 5 max. 12 9 8 max. 16 2 1.5 max. 3
standard on request at extra charge standard on request at extra charge standard on request at extra charge standard on request at extra charge
STW (STB)
Switching point accuracy in % of control / limit range Ambient temperature error referred to control / limit range
TR: in upper third of scale 1.5%, at start of scale 6% TW, STB, STW (STB): in upper third of scale +0/-5%, at start of scale +0/-10% A deviation of the ambient temperature at the housing from the 22 calibration ambient temperature produces a shift in the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point Surface-mounting thermostats with end-of-scale value < 200C 200C 350C > 350C 500C TR / TW STB/STW (STB) TR / TW STB/STW (STB) TR / TW STB/STW (STB) due to thermostat head 0.08%/C 0.17%/C 0.06%/C 0.13%/C 0.14%/C 0.12%/C due to capillary per meter length 0.047%/C 0.054%/C 0.09%/C 0.11%/C 0.04%/C 0.03%/C -50 to +50C
Permissible storage temperature Permissible ambient temperature in operation Nominal position (NL)
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/10
Protection Cable entry Weight Thermostat mounting, Series ATHf- . . with capillary
cover: polycarbonate, impact-resistant color: pebble gray RAL 7032 base: die-cast aluminium, painted color: anthracite gray RAL 7015 cover: die-cast aluminium, painted color: pebble gray RAL 7032 ATH-1: ATH-2, ATH-20, ATH-7, ATH-70: switching point adjustable from the outside by switching point adjustable by screwdriver after taking off turning the knob the housing cover EN 60 529-IP54 as standard: clamping gland M20 x 1.5, for 8 10 mm cable diameter approx. 0.5 kg Standard Code r b k by 2 screws through base of housing, capillary exit on side of housing, cover and base in plastic mounting flange in steel, capillary exit at housing spigot wall bracket thread M 18 x 1 with locknut on housing spigot, capillary exit at spigot
Process connection* Series ATHswith rigid stem End of scale up to 150C Pocket U screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 End of scale above 150C Pocket UZ screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and extension, in order not to exceed the max. permissible ambient temperature +80C at the housing plain cylindrical probe A (standard) pocket U (on resquet) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clip with fixing screw for securing the probe Pocket U Pocket UZ up to +150C CuZn (brass) as standard above +150C St (steel) as standard above +150C St (steel) as standard (CrNi on request) (CrNi on request) standard lengths: 100, 120, 150, 200 or 300 mm other lengths on request D = 8 mm, D = 10 mm
*other process connections and pockets, see Data Sheet 60.6710. Note: Physical and toxicological properties of the expansion media which may escape in the event of a system fracture. Control range with end of scale Dangerous reactions no no no Fire/explosion hazard ignition explosion temperature limit % v/v + 355C 0.6 8 + 490C -no no Water contamination yes yes no irritant yes yes no Toxicological data danger to health
1) 1)
toxic no no no
no
At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, for example after a fracture of the measuring system.
Connection diagrams
ATH.-70
ATH.-70/U
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/10
Dimensions
23 70 66
M20x1.5
G 94
67
M20x1,5
27 a/f SW27
94
14
33
G1/2
67
38
SW24
18
M20x1.5
M18x1
hex
SW
G
L1 S 94
03.07/00073225
67
_85
L1
hex SW
33
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/10
94
67
70
M20x1.5 6.5 65
hexSW
L1
45
67
50
d
43
94
M20x1.5
67
03.07/00073225
4.5
72
66
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/10
Process connection U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 UZ G1/2 UZ G1/2 UZ G1/2
Immersion tube dia. x length mm 8x200 15x100 15x100 CrNi 8x200 15x100 8x150 8x120 8x120 8x120 CrNi 8x150 8x200 8x200 8x300 8x150 8x100 8x100 CrNi 8x200 8x300 8x200 8x150 8x200
Process connection U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 U G1/2 UZ G1/2 UZ G1/2 UZ G1/2 UZ G1/2 UZ G1/2
Immersion tube dia. x length mm 8x200 15x100 15x100 CrNi 8x200 15x100 15x100 8x150 8x200 8x120 8x120 CrNi 8x150 8x200 8x300 8x100 8x100 8x100 CrNi 8x200 8x200 CrNi 8x300 8x120 8x200 8x150 8x150 CrNi 8x200
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 8/10
Stock items with rigid stem Protection temperature monitor STW (STB)
Sales No. 60/60001478 60/60000188 60/60002217 60/60000885 Type ATHs-20 ATHs-20 ATHs-20 ATHs-20 Control/limit range C +20 to +150 +50 to +300 +50 to +350 +20 to +500 Differential % 4-6 4-6 4-6 7
Process connection U G1/2 U G 1/ 2 U G1/2 U G1/2 U G1/2 U G1/2 UZ G1/2 UZ G1/2 UZ G1/2 U G1/2 U G1/2 UZ G1/2 EZS G3/4 UZO G1/2 UZ G1/2
Immersion tube dia. x length mm 8x150 8x200 8x300 8x150 8x200 8x200 8x150 8x300 8x200 8x150 8x200 8x200 170 200 8x200
Process connection A A A A A A A
Process connection A A A A A A A A A A A A A
Probe dia. x length mm 6x185 6x185 6x138 6x107 6x107 6x 88 6x 88 6x101 6x101 6x 63 6x 63 6x148 6x148
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 9/10
Capillary mm
Probe dia. x length mm 200 6x108 6x108 6x116 6x 77 6x 77 6x 77 6x 85 6x 85 6x114 6x 55 6x 55 6x 55 6x127 6x127 6x127 200
Order details
Order code 603021 01 02 20 70 1 2 014 016 021 022 025 041 052 042 066 043 062 063 064 045 046
Surface-mounting thermostat, ATH series (1) Basic type Surface-mounting thermostat, ATH series (2) Basic type extension ATH-1 Temperature controller TR ATH-2 Operating temperature monitor TW ATH-20 Protection temperature monitor STW (STB) ATH-70 Protection temperature limiter STB (3) Style ATHs with rigid stem ATHf with capillary (4) Control / limit ranges C -20 to +050 * -10 to +040 * +00 to +050 +00 to +070 +00 to +100 +20 to +090 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250 +50 to +300 +20 to +400 +20 to +500 * on TR and TW only (5) Switching differential no differential (-70 STB) 1.5% of scale span 2% of scale span 3% of scale span 5% of scale span 6% of scale span 7% of scale span 9% of scale span
00 15 20 30 50 60 70 90
(on TR + TW only) (on STW (STB) only) (on TR + TW only) (on TR + TW + STW (STB) only) (on TR + TW only) (on STW (STB) only) (on STW (STB) only)
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 10/10
Order details
Surface-mounting thermostat, ATH series
Order details 0 1000 2000 3000 4000 5000 .... 00 40 20 10 20 30 (6) Capillary length ATHs no capillary 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text) (7) Material of capillary ATHs no capillary Cu (copper) CrNi (stainless steel 1.4571) (8) Process connection (PA) 1 A = plain cylindrical probe (on ATHf only) U = screw-in pocket UZ = screw-in pocket with extension (9) Thread for process connection1 no thread (process connection A) external thread G 1/2 (10) Material of process connection with process connection A only CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (11) Fitting length S (immersion tube length) ATHf no pocket 100mm 120mm 150mm 200mm 300mm 400mm . . . . special length, details in plain text (12) Diameter D (immersion tube diameter) ATHf no pocket 08 mm 10 mm (13) Diameter d (probe diameter) 6 mm 8 mm (14) Extra codes 2 no extra code U STB with break (SPST-NC) contact, lock-out and additional signal contact (-70 STB) au gold-plated switch contacts (only with 3%, 5%, and 7% switching differential and STB with break (SPST-NC) contact) a housing cover in die-cast aluminium (not with extra code r) r thermostat head mounting by 2 screws through base of housing, capillary exit on side of housing, cover and base in plastic b mounting flange in sheet steel, capillary exit at housing spigot k wall bracket
00 13 00 46 01 20 000 100 120 150 200 300 400 .... 00 08 10 6 8 000 574 702 701 711 764 248 Order code (1) 603021 Order example 603021
1 2
/ /
(2) .. 70
(3) . 1
(5) .. 00
(6) .... 0
(7) .. 00
(8) .. 20
(9) .. 13
, ... , ...
See data sheet 60.6710 for additional probe mountings and pockets. List extra codes in sequence, separated by commas.
03.07/00073225
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/9
Switching action
Temperature controller TR and temperature monitor TW
When the temperature at the probe exceeds the selected setpoint, the microswitch is operated through a mechanism and the circuit is opened or closed. When the temperature falls below the setpoint (by the switching differential), the microswitch returns to its initial position.
ATHs-12
Use of the safety temperature monitor STW as safety temperature limiter STB
The circuitry to which the thermostat is connected must comply with DIN 3440 and VDE 0116.
Self-monitoring on the safety temperature limiter STB and safety temperature monitor STW (STB)
Failure of the measuring system on the STB and STW (STB) i.e. a leakage of the expansion fluid, will cause the pressure under the diaphragm to drop, thus permanently opening the circuit. A reset is now impossible. When the temperature at the probe cools down to below about -20C, the circuit will also be opened. As the temperature rises to above -20C (approx.), the STB has to be reset manually, by pressing the reset button. On the STW (STB), the reset is performed automatically.
ATHf-170
You will find the Declarations of Conformity on the Internet at: www.jumo.net Products or they can be sent to you on request.
05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/9
Technical data
Control ranges and temperature probes Switching action Control/ limit ranges C -20 to +050 -10 to +040 +00 to +050 +00 to +070 +00 to +100 +20 to +090 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250 +50 to +300 +50 to +350 +30 to +110 +60 to +130 +20 to +150 +50 to +250 +50 to +300 +20 to +400 +20 to +500 +20 to +500 +20 to +400 +20 to +500 +20 to +500 End of scale up to 200C liquid-filled Max. permissible Maximum probe temperature capillary length C mm 060 050 060 080 125 115 135 140 150 175 230 290 345 405 135 150 175 290 345 gas-filled TR and TW 460 550 550 460 550 550 1000 2000 4000 1000 2000 4000 278 148 202 176 127 202 Notes Probe length L in mm probe dia. d = 6 mm is standard 141 185 185 138 107 138 125 106 135 088 101 073 063 053 108 116 077 064 055
TR and TW
5000
5000
Capillary and temperature probe Type ATH.-. . Capillary Temperature probe copper (Cu) copper (Cu) Mat. Ref. Cu-DHP 1.5mm dia. brazed Mat. Ref. Cu-DHP stainless steel (CrNi) copper (Cu) Mat. Ref. 1.4571 1.5mm dia. brazed Mat. Ref. Cu-DHP stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 standard: 1000 mm, maximum: 5000 mm 5 mm
up to 350C
up to 500C
up to 350C
at extra cost
Capillary length Min. bending radius of capillary Electrical data Switching device
STB (-70) microswitch with break contact and lock-out 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10%
STB (-70/U) microswitch with break contact, lockout and additional signal contact
Rating
with switching differential 1.5% and 2% 6 (1.2) A, 230 V AC +10%, p.f. = 1 (0.6) microswitch gold-plated, extra code /au* (*only with switching differential 3%, 5%, 7%) 0.1 A, 24 V AC/DC contact resistance 2.5 10 m 05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/9
standard on request at extra cost standard on request at extra cost standard on request at extra cost standard on request at extra cost
TR: in upper third of scale 1.5%, at start of scale 6% TW, STB, STW (STB): in upper third of scale +0/-5%, at start of scale +0/-10% A deviation of the ambient temperature at the case from the calibration ambient temperature of 22C produces a shift of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point Surface-mounting thermostats with end of scale < 200C 200C 350C > 350C 500C TR / TW STB/STW (STB) TR / TW STB/STW (STB) TR / TW STB/STW (STB) due to thermostat head, % per C 0.08 0.17 0.06 0.13 0.14 0.12 due to capillary, % per C per m length 0.047 0.054 0.09 0.11 0.04 0.03 -50 to +50C
Permissible storage temperature Permissible ambient temperature in operation Nominal position (NL) Case Standard Code a Setpoint adjustment
Protection Cable entry Weight Thermostat mounting on type ATHf- . . with capillary
case cover: polycarbonate, impact resistant color: pebble gray RAL 7032 case base: die-cast aluminium, painted color: anthracite RAL 7015 cover: die-cast aluminium, painted color: pebble gray RAL 7032 TR: TW, TB, STB, STW (STB): switching point adjustable from the outside by turning the switching point adjustable with screwdriver, after knob removing case cover EN 60 529-IP54 standard: clamping nipple M 20 x 1.5, for 8 10 mm cable diameter approx. 0.8 kg standard thread M 18 x 1 with locknut at case spigot, capillary exit at spigot Code by 2 screws through base of case, capillary exit on side of case, r cover and base in plastic b mounting flange in sheet steel, capillary exit at case spigot k wall bracket
05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/9
End of scale above 150C pocket UZ screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and extension, in order not to exceed the max. permissible ambient temperature of +80C at the case plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clip with fixing screw for securing the probe pocket U pocket UZ up to +150C CuZn (brass) is standard above +150C St (steel) is standard above +150C St (steel) is standard (CrNi on request) (CrNi on request) standard lengths: 100, 120, 150, 200 or 300 mm other lengths on request D = 15 mm
End of scale up to 150C pocket U screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2
* For other process connections and pockets, see Data Sheet 60.6710. Note: Physical and toxicological properties of the expansion media which may escape in the event of a system fracture. Control range with end of scale C Dangerous reactions Fire /explosion hazard Ignition Explosion temperature limit C % v/v + 355 0.6 8 + 490 -no no Water contamination irritant Toxicological data danger to health
1) 1)
toxic
no no no
yes yes no
yes yes no
no
no no no
At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, e.g. after a fracture of the measuring system.
Connection diagrams
I
1 2 4 1 2 4
II
1 1 2 2
System I and II: with changeover (SPDT) contact Switching action: TR, TW, STW
I
1 2 4 1 2
II
1 2 4 1 2
System I: with changeover (SPDT) contact Switching action: TR, TW, STW System II: with break (SPST-NC) contact and lock-out Switching action: STB
System I and II: with break (SPST-NC) contact and lock-out Switching action: STB
I
1 2 4 1 2 4
II
1 2 4 42 1
I
1 2 4 42 1
II
1 2 4 42 1
System I: with changeover (SPDT) contact Switching action: TR, TW, STW System II: with break (SPST-NC) contact, lock-out and additional signal contact
System I and II: with break (SPST-NC) contact, lock-out and additional signal contact Switching action: STB
05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/9
Dimensions
ATHs-12, ATHs-120 with pocket U
69 23
L1
hex SW
G
32
94
120
23
10
71
71
90 SW27 27 a/f
S
D
71
72
100
120
94
M18x1 94
18
24SW24 a/f
M20x1.5
38
05.07/00073228
120
ca. 91
69
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/9
69
71
120
6.5 65 94 hex
L1
G
S
69
43
71
M20x1.5
50 120 hex
16
L1
94
D 80
05.07/00073228
71
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/9
05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 8/9
Control / limit ranges C -20 to +050* -10 to +040* +00 to +050 +00 to +070 +00 to +100 +20 to +090 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250 +50 to +300 +20 to +400 +20 to +500 * TR and TW only Switching differential without switching differential (-70 STB) 1.5% of scale span 2% of scale span 3% of scale span 5% of scale span 6% of scale span 7% of scale span 9% of scale span Capillary length (details in mm) ATHs without capillary 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text) Material of capillary ATHs without capillary Cu (copper) CrNi (stainless steel 1.4571)
(TR + TW only) (STW (STB) only) (TR + TW only) (TR + TW + STW (STB) only) (TR + TW only) (STW (STB) only) (STW (STB) only)
05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 9/9
(8)
UZ = screw-in pocket with extension Thread for process connection 1 no thread (process connection A) male thread G 1/2
(10) Material of process connection only with process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (11) Fitting length S (immersion tube length) ATHf without pocket 100 mm 120 mm 150 mm 200 mm 300 mm 400 mm (special length, details in plain text) (12) Diameter D (immersion tube diameter) ATHf- without pocket 15 mm (13) Diameter d (probe diameter) 6 mm (14) Extra codes 2 no extra code au snap-action switch contact, gold-plated (only with differentials 3%, 5%, and 7% and STB with break (SPST-NC) contact) U STB with break (SPST-NC) contact, lock-out and additional signal contact (basic type -70 STB only) a housing cover in die-cast aluminium (not with extra code r) r switch head mounting by 2 screws through base of housing, capillary exit at housing side, cover and base in plastic b mounting flange in steel sheet, capillary exit on housing spigot k wall bracket
See Data Sheet 60.6710 for additional probe mountings and pockets. List extra codes in sequence, separated by commas.
(2) / .... -
(3) . -
(4) .. -
(5) .. -
(6) .... -
(7) .. -
(8) .. -
(9) .. -
(10) .. -
(11) ... -
(12) .. /
(13) . /
Order example 603026 / 0202 2 - 043 - 30 - 2000 2 List extra codes in sequence, separated by commas.
20
10
00
00
- 000 -
00
/ 2482
05.07/00073228
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
ATHs-SE-70
Switching action
Temperature monitor TW and safety temperature monitor STW When the temperature at the probe exceeds the set limit, the circuit is opened by a snap-action switch. After the temperature has fallen below the set limit (by the switching differential), the switch returns to its initial position. Lock-out facility on the safety temperature limiter STB When the temperature at the probe exceeds the set limit, the circuit is opened and locked out mechanically. After the temperature has dropped below the set limit by about 10% of the span, the switch can be reset mechanically. Use of the safety temperature monitor STW as a safety temperature limiter STB The circuitry to which the thermostat is connected must comply with DIN 3440 and VDE 0116. Self-monitoring on the safety temperature limiter STB and the safety temperature monitor STW (STB) Failure of the measuring system on an STB or STW (STB), i.e. a leakage of the expansion liquid, will cause the pressure under the diaphragm to drop, thus permanently opening the circuit. A reset is now impossible. If the temperature of the probe cools down to below -20C, the circuit will also be opened. As the temperature rises to above -20C, the STB has to be reset manually, by pressing the reset button. On the STW (STB), the reset is performed automatically.
ATHf-SE-..
You will find the Declarations of Conformity on the Internet at: www.jumo.net vProducts vData Sheet 60.3031 or ask for them to be sent.
Det Norske Veritas Germanische Lloyd DIN 3440 (not for the ATH.-SE-70) Bureau Veritas. Pressure Equipment Directive 97/23/EC CE0036 (ATH.-SE-20 and ATH.-SE-70 only)
02.07/00309799
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Technical data
Control ranges and temperature probes Type Control/ limit setting range C 00 100 20 90 30 110 20 120 60 140 20 150 50 200 50 250 50 300 30 110 60 140 20 150 50 250 50 300 Max. permissible temperature at the probe C 125 125 135 140 165 175 230 290 345 135 165 175 290 345 Length of temperature probes in mm Copper (Cu) Stainless steel (CrNi) dia. 6 dia. 8 dia. 6 dia. 8 67 99 75 107 83 130 91 138 76 117 84 125 67 99 75 107 76 117 83 123 57 80 65 88 64 93 72 101 54 73 49 63 70 104 78 112 68 102 77 110 53 72 61 80 50 66 58 -
ATH.-SE-2
ATH.-SE-20 ATH.-SE-70
Capillary and temperature probe Type ATH.-SE-2 ATH.-SE-20 ATH.-SE-70 End of scale 200C Capillary Temperature probe copper (Cu) copper (Cu) Mat. Ref. 2.0090 1.5mm dia. brazed Mat. Ref. 2.0090 stainless steel (CrNi) copper (Cu) Mat. Ref. 1.4571 1.5mm dia. brazed Mat. Ref. 2.0090 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 normally 1000 mm, 2000 mm max. 5 mm Notes
> 200C
all ranges Capillary length Min. bending radius of capillary Electrical data Switching element
at extra cost
ATH.-SE-70 microswitch with break (n.c.) contact and lock-out 10(2) A, 230 V AC +10%, p.f. = 1(0,6) 0.25A, 230 V DC +10%
ATH.-SE-70/U microswitch with break (n.c.) contact, lock-out and additional signal contact
Max. contact rating with switching differential 1.5%: 6(1,2) A, 230 V AC +10%, p.f. = 1(0,6)
02.07/00309799
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Switching point accuracy in % of control / limit setting range Ambient temperature error referred to control / limit setting range
A deviation of the ambient temperature at the case from the calibration ambient temperature of +22C produces a shift of the switching point. higher ambient temperature = lower switching point lower ambient temperature = higher switching point for instruments with end-of-scale value < 200C ATH.-SE-2 ATH.-SE-20 ATH.-SE-70 due to the case 0.08%/C 0.047%/C 0.17%/C 0.054%/C -50 to 50C +80C max. to DIN 16 257, nom. position 0 90 (other nom. positions on request) 0.06%/C 0.09%/C 0.13%/C 0.11%/C due to the capillary per m ATH.-SE-2 200C ATH.-SE-20 ATH.-SE-70
Permissible storage temperature Permissible ambient temperature in use Nominal position (NL) Case Case
aluminium die-casting surface in impact-resistant textured paint: cover: RAL 7032, base: RAL7015 switching point adjustable using a screwdriver, after removing case cover EN 60 529-IP 54 ATHf-SE-...approx. 0.70 kg ATHs-SE-...approx. 0.65 kg with pocket U ATHs-SE-...approx. 0.85 kg with pocket UZ
Process connection Series ATHs-SE-.. with rigid stem end-of-scale value up to 150C Pocket U screw-in pocket with screw-in spigot 1/2" pipe Form A to DIN 3852/2 end-of-scale value above 150C Pocket UZ screw-in pocket with screw-in spigot 1/2" pipe Form A to DIN 3852/2 with extension, in order not to exceed the max. permissible ambient temperature of +80C at the case plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot 1/2" pipe Form A to DIN 3852/2 and clip with fixing screw for securing the probe Pocket U Pocket UZ up to +150C brass as standard above +150C steel as standard above +150C steel as standard (CrNi on request) (CrNi on request) standard lengths: 100, 120, 150 (material: brass, steel, CrNi) with 200 mm, only in brass or steel D = 8 mm, D = 10 mm
Note: Physical and toxicological properties of the expansion media which may escape in the event of a system fracture. Fire /explosion hazard Water Toxicological data contaminaIgnition Explosion irritant danger to toxic tion temp. C limit % v/v health 1 < +200 no + 355 0.6 8 yes yes no 1 200C +300 no + 490 -yes yes no 1 At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, for example after a fracture of the measuring system. 02.07/00309799 Control range with end-of-scale value C Dangerous reactions
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Dimensions
ATHs-SE-... 2 and 20 with pocket U up to 150C
70
27a/f
1/2 pipe 26
02.07/00309799
14
~85
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Dimensions
ATHs-SE-... 7 with pocket U up to 300C
Connection diagrams
ATH.SE-2 / ATH.SE-20
ATH.SE-70
ATH.SE-70/U
Order details
ATH.-SE Series for application on seagoing ships Order code 603031 02 20 70 (3) 1 2 (4) 041 025 052 042 067 043 062 063 064 (1) (2) Basic type Surface-mounting thermostat, ATH.-SE series Basic type extension ATH.-SE-2 Temperature monitor TW ATH.-SE-20 Safety temperature monitor STW (STB) ATH.-SE-70 Safety temperature limiter STB Style ATHs-SE-.. ATHf-SE-.. with rigid stem with capillary
Control / limit ranges 20 to 90C 0 to 100C 30 to 110C 20 to 120C 60 to 140C 20 to 150C 50 to 200C 50 to 250C 50 to 300C
02.07/00309799
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
ATH.-SE Series for application on seagoing ships Order code 00 30 60 15 0 1000 2000 .... (7) 00 40 20 (8) 10 20 30 (9) 00 13 00 46 01 20 000 100 120 150 200 00 8 10 6 8 000 574 (5) Switching differential no switching differential (-70 STB) 3% of scale span S1 6% of scale span S2 1.5% of scale span S3 Capillary length ATHs-SE without capillary 1000 mm 2000 mm (special length, details in plain text) Material of capillary ATHs-SE without capillary Cu (copper) CrNi (stainless steel 1.4571) Process connection A = plain cylindrical probe (for ATHf-SE only) U = screw-in pocket UZ = screw-in pocket with extension Thread for process connection no thread (process connection A) external thread G 1/2
(6)
(10) Material of process connection for process connection A only CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (11) Fitting length S (immersion tube length) ATHf-SE without pocket 100 mm 120 mm 150 mm 200 mm (not CrNi) (12) Diameter D (immersion tube diameter) ATHf-SE without pocket 08 mm 10 mm (13) Diameter d (probe diameter) 06 mm 08 mm (14) Extra codes no extra code U= STB with break contact, lock-out + additional signal contact (-70 STB)
(2) ..
(3) . 1
4) ...
(5) .. 15
(6) .... 0
(7) .. 00
(8) .. 20
(9) .. 13
(10) .. 46 -
(12) (13) .. . / 8 6 /
- 025 -
02.07/00309799
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/7
Brief description
Thermostats control and monitor thermal processes. Surface-mounting thermostats in the ATH-SW series consist of one or two separate measuring and switching systems. The instruments can be supplied as temperature monitors TW, safety temperature monitors STW (STB) and safety temperature limiters STB. In fault condition, the STB sets the system being monitored to a safe operational state. Surface-mounting thermostats operate on the principle of liquid expansion, with a microswitch serving as the electrical switching device.
ATHs-SW-..
Switching action
Temperature monitor TW When the temperature at the probe exceeds the setpoint, the microswitch is operated via the transmission mechanism and the circuit is opened or closed. When the temperature drops below the setpoint (by the amount of the switching differential), the microswitch returns to its initial position. Lock-out facility on the safety temperature limiter STB When the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has dropped below the critical temperature by about 10 % of the scale span (approx. 15% for limit setting > + 350C), the microswitch can be reset manually. Use of the safety temperature monitor STW as safety temperature limiter STB The circuitry to which the thermostat is connected must comply with DIN 3440 and VDE 0116. Self-monitoring on the safety temperature limiter STB and the safety temperature monitor STW (STB) Failure of the measuring system, i.e. a leakage of the expansion fluid, will cause the pressure under the diaphragm to drop (STB and STW (STB)), thus permanently opening the circuit. A reset is now no longer possible. When the temperature at the probe cools down to below approx. -20C, the circuit will also open. As the temperature rises to above approx. -20C, the STB has to be reset manually. On the STW (STB), the reset is perfomed automatically.
ATHf-SW-..
The Declarations of Conformity can be found on the Internet at: www.jumo.net Products or can be sent to you on request.
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/7
Technical data
Control ranges and temperature probes Switching action Control /limit ranges C -20 to +050 -10 to +040 +00 to +050 +00 to +070 +00 to +100 +20 to +090 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250 +50 to +300 +50 to +350 +30 to +110 +60 to +130 +20 to +150 +50 to +250 +50 to +300 +20 to +400 +20 to +500 +20 to +500 +20 to +400 +20 to +500 +20 to +500 liquid-filled Max. permissible Maximum probe temperature capillary length C mm 060 050 060 080 125 115 135 140 150 175 230 290 345 405 135 150 175 290 345 gas-filled TW 460 550 550 460 550 550 1000 2000 4000 1000 2000 4000 278 148 202 176 127 202 Probe length L in mm for probe dia. d = 6 mm (standard) 141 185 185 138 107 138 125 106 135 088 101 073 063 053 108 116 077 064 055
TW
5000
5000
Capillary and temperature probe Type ATH.-SW- . . End of scale up to 200C Capillary Temperature probe copper (Cu) copper (Cu) Mat. Ref. 2.0090 1.5mm dia. brazed Mat. Ref. 2.0090 stainless steel (CrNi) copper (Cu) Mat. Ref. 1.4571 1.5mm dia. brazed Mat. Ref. 2.0090 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 1.5mm dia. welded Mat. Ref. 1.4571 1000 mm is standard, up to 5000 mm 5 mm Notes
up to 350C
up to 500C
up to 350C
at extra cost
Capillary length Min. bending radius of capillary Electrical data Switching device
Contact rating
STB microswitch with break (SPST-NC) contact and lock-out 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% with switching differentials 1.5% and 2% 6 (1.2) A, 230 V AC +10%, p.f. = 1 (0.6) microswitch gold-plated, extra code /au 0.1 A, 24 V AC/DC contact resistance 2.5 10 m
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/7
standard on request at extra cost standard on request at extra cost standard on request at extra cost standard on request at extra cost
in upper third of scale +0/-5%, at scale start +0/-10% A deviation of the ambient temperature at the housing from the 22C calibration ambient temperature produces a shift in the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point Surface-mounting thermostats with end of scale < 200C 200C 350C > 350C 500C STB/STW (STB) TW STB/STW (STB) TW STB/STW (STB) due to thermostat head, % per C 0.17 0.06 0.13 0.14 0.12 due to capillary, % per C per meter length 0.054 0.09 0.11 0.04 0.03 -50 to +50C
TW 0.08 0.047 Permissible storage temperature Permissible ambient temperature in operation Nom. position (NL) Housing as standard Setpoint adjustment Enclosure protection Cable entry Weight Thermostat mounting Series ATHf-SW with capillary
die-cast aluminium, painted switching point adjustable with screwdriver, after removal of housing cover EN 60 529-IP65 cable gland M 20 x 1.5, for 6 12 mm cable diameter approx. 1.0 kg by 2 screws through base of housing (wall mounting), capillary exit at side of housing
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/7
end of scale above 150C pocket UZ screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and extension, in order not to exceed the maximum permissible ambient temperature of +80C at the housing Series plain cylindrical probe A (standard) ATHf-SW pocket U (on request) with capillary screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clip with fixing screw for securing the probe Material pocket U pocket UZ up to +150C: CuZn as standard above +150C: St as standard above +150C: St as standard (CrNi on request) (CrNi on request) Fitting length S standard lengths: 100, 120, 150, 200 or 300 mm other lengths on request Immersion tube dia. single thermostat D = 8 mm twin thermostat D = 15 mm *see Data Sheet 60.6710 for other process connections and pockets. Note Physical and toxicological properties of the expansion fluid which may escape in the event of a system fracture. Fire /explosion hazard Water Ignition Explosion limit contamination irritant temp. C % v/v < +200 no + 355 0.6 8 yes yes 200 +350 no + 490 -yes yes > 350 +500 no no no no no At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, e.g. after a fracture of the measuring system. Control range with end of scale C Dangerous reactions Toxicological data danger to health
1 1
end of scale up to 150C pocket U screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2
toxic no no no
no
Connection diagrams
Single thermostats
1 2 4
Switching action: TW, STW Twin thermostats
1 1 2 4
Switching action: STB
1 2 2
I
1 2 4 1 2 4
II
1 1 2 2
I
1 1 2 2
II
1 1 2 2
System I and II: with changeover (SPDT) contact switching action: TW, STW
System I: with changeover (SPDT) contact switching action: TW, STW System II: with break (SPST-NC) contact and lock-out switching action: ST
System I and II: with break (SPST-NC) contact and lock-out switching action: STB
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/7
Dimensions
ATHf-SW-.. with capillary
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/7
single thermostats
twin thermostats
Control / limit ranges C -20 to +050 * -10 to +040 * +00 to +050 +00 to +070 +00 to +100 +20 to +090 +30 to +110 +20 to +120 +60 to +130 +20 to +150 +50 to +200 +50 to +250 +50 to +300 +20 to +400 +20 to +500 * TW only Switching differential without switching differential (-70 STB) 1.5% of scale span 2% of scale span 3% of scale span 5% of scale span 6% of scale span 7% of scale span 9% of scale span Capillary length ATHs-SW without capillary 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text)
(TW only) (STW (STB) only) (TW only) (TW + STW (STB) only) (TW only) (STW (STB) only) (STW (STB) only)
(7) Material of capillary 00 ATHs-SW without capillary 40 Cu (copper) 20 CrNi (stainless steel 1.4571) * see Data Sheet 60.6710 for additional probe mountings and pockets
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/7
UZ = screw-in pocket with extension Thread for process connection * no thread (process connection A) male thread G 1/2
(10) Material of process connection only with process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (11) Fitting length S (immersion tube length) ATHf-SW without pocket 100 mm 120 mm 150 mm 200 mm 300 mm 400 mm (special length, details in plain text) (12) Diameter D (immersion tube diameter) ATHf-SW without pocket 08 mm with single thermostats 15 mm with twin thermostats (13) Diameter d (probe diameter) 6 mm (14) Extra codes no extra code au snap-action switch contact, gold-plated
* see Data Sheet 60.6710 for additional probe mountings and pockets
(2) .... -
(3) . 2
(5) .. 30
(7) .. 20
(8) 00 10
(9) .. 00
(12) (13) .. . 00 6
/ /
04.07/00376440
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Brief description
Surface-mounting thermostats control and monitor thermal processes. Thermostats in the AM series are available with 1 or 2 single-pole snap-action switches as temperature controllers (TR) and temperature monitors (TW). On thermostats with 2 single-pole snap-action switches, the contact spacing (in C) is factory-set according to customer requirements. Surface-mounting thermostats operate on the principle of liquid expansion, with a microswitch serving as the electrical switching device.
Switching action
Temperature controller TR and temperature monitor TW When the temperature at the probe exceeds the selected setpoint, the microswitch is actuated via a transmission mechanism and the circuit is opened or closed. When the temperature drops below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position.
Technical data
Control ranges and probe table Control range C -20 to +040 -20 to +050 +20 to +090 -20 to +100 +30 to +110 -20 to +150 +50 to +200* Switching differential % 2.5 2.5 2.5 7 2.5 2.5 7 2.5 2.5 Max. probe temperature C +050 +060 +115 +175 +125 +135 +200 +173 +230 Capillary lengths up to [m] 2 2 1 2 2 2 1 30 1 139 +080 Max. switch head temperature C +050 +060 Max. contact spacing C 8 10 14 70 20 16 80 245 283 210 091 157 188 084 113 Probe length in mm with 6 mm probe diameter
* Type AMs is supplied with probe mounting UZ to Data Sheet 60.6710, and not as shown in the outline drawing.
08.06/00073235
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Contact rating
Contact reliability Rated surge voltage Overvoltage category Fusing required Electrical connection
AM . -1 / AM . -2 AMF . -13 / AMF . -23 1 single-pole 2 single-pole microswitch with changeover contact microswitches with changeover contact Switching action (n.c.) break contact, terminal 2 (n.o.) make contact, terminal 4 16 (3) A, 230 V AC +10%, 8 (1.5) A, 230 V AC +10%, TR, TW p.f. = 1 (0.6) p.f. = 1 (0.6) 0.25 A, 230 V DC +10% 0.25 A, 230 V DC +10% To ensure the highest possible switching reliability, we recommend a minimum loading of: AC / DC = 24V, 20mA 1500 V (via switching contacts 400 V) II see Contact rating standard extra code X faston connector A 6.3 x 0.8 DIN 46244 screw connection up to 2.5 mm2 conductor cross-section (at extra cost) - also suitable for retrofitting -
Operating data Switching differential in % of control/limit range Contact spacing on multi-pole version Nominal value Possible actual value 2.5 2.5 max. 3.5 standard TR, TW 7 7 max. 8 on request with switching differential Contact spacing of scale span Switching point accuracy of contact spacing, % of span minimum maximum 2.5 % 1% according to 1 % 7% 3% control range table <3% The contact spacing is specified in C against the setpoint of contact I. (the contact no. is marked on the back of the housing) sign - = switching before setpoint sign + = switching after setpoint For simultaneous switching, specify contact spacing 0. in upper third of scale Switching action Switching differential or at limit TR TW Ambient temperature effect referred to control/limit range 2.5 % 7% 2.5 % 7% 1.5 % 4% +0 / -3 % +0 / -8 % Switching action
Any deviation of the ambient temperature at the switch head and/or the capillary from the 22C calibration ambient temperature will result in a shift of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point for temperatures with end of scale / limit value < 200C 200C switching differential in % 2.5 7 2.5 7 ambient temperature effect on switch head, % per C 0.15 0.34 0.12 0.27 ambient temperature effect on capillary, % per C per m 0.05 0.09 0.04 0.07 -50 to +50C +80C max. to DIN 16 257, NL 0 NL 90 (other NL on request)
Permissible storage temperature Permissible ambient temp. in operation Nominal position (NL)
08.06/00073235
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
color: similar to RAL 9002 AM . -2, AMF . -23 switching point adjustable with setpoint scale after removing a cover EN 60 529-IP40 push-in gland approx. 0.4 kg by 2 screws through back of housing
steel mounting flange, capillary exit on housing spigot wall bracket M 18x1 thread with locknut on housing spigot, capillary exit on housing spigot
Process connection* end of scale above 150C pocket UZ screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and extension, so that the max. permissible ambient temperature +80C at the housing is not exceeded Series plain cylindrical probe A (standard) AMfpocket U (on request) with capillary screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe Material pocket U pocket UZ up to +150C: CuZn is standard above +150C: St is standard above +150C: St is standard (CrNi on request) (CrNi on request) Fitting length S standard lengths: 100, 120, 150, 200 or 300 mm other lengths on request Immersion tube dia. D = 8 mm * see Data Sheet 60.6710 for other process connections and pockets Series AMswith rigid stem end of scale up to 150C pocket U screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2
Note Physical and toxicological properties of the expansion media that may escape in the event of a system fracture. Fire/explosion hazard Water Ignition temp. Explosion limit contamination irritant C % v/v < +200 no + 355 0.6 8 yes yes 200 +350 no + 490 -yes yes At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, e.g. after a fracture of the measuring system. Control range with end of scale C Dangerous reactions Toxicological data danger to health
1) 1)
toxic no no
1)
Connection diagrams
AM . -1 / AM . -2
08.06/00073235
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Dimensions
27 a/f
AMs-1 / AMFs-13
27 a/f
AMs-2 / AMFs-23
AMf-1 (standard), fixing by 2 screws through back of housing, with plain cylindrical probe A, no pocket
08.06/00073235
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Dimensions
24 a/f
24 a/f
27 a/f
Switching differential %
* model is being phased out Different models on request - minimum ordering quantity: 50 units
08.06/00073235
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
(2) ..
(3) . 1
(4) ...
(5) .. 25
(6) ....
(7) .. 20
(8) .. 13
(9) .. 46
(10) ... /
- 013 -
- 0000 -
- 300 /
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Brief description
Heating thermostats with a microswitch are used to monitor and control thermal processes, mainly in heating installations. The instrument in the AMHs-1-80 series consists of two independent measurement and switching systems. The thermostats operate on the principle of liquid expansion, with a microswitch serving as the electrical switching device.
Switching action
Temperature controller (TR) If the temperature at the probe goes above the selected setpoint, the electrical circuit is opened by a microswitch. If the temperature falls below the setpoint (by the amount of the switching differential) the microswitch returns to its initial position. Lock-out function for the safety temperature limiter (STB) If the temperature at the probe goes above the selected setpoint, the electrical circuit is opened and remains mechanically locked out. When the temperature has fallen to about 10% of the span below the set limit, the microswitch can be reset manually. Self-monitoring function for the safety temperature limiter (STB) If the measuring system fails, i.e. if the expansion liquid has leaked, then the pressure under the diaphragm of the STB drops and the electrical circuit is permanently open. It is no longer possible to reset the system. If the temperature at the probe falls below approx. -20C the circuit is also opened, but will close again if the temperature rises above -20C (approx.).
You will find the Declarations of Conformity on our website at: www.jumo.net vProducts vData Sheet 60.3045 or ask for them to be sent.
Technical data
Electrical data Switching device Contact rating TR Microswitch with changeover contact STB Microswitch with changeover contact and lock-out 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10%
Switching differential Switching point accuracy Permissible ambient temperature in operation Permissible storage temperature Max. permissible probe temperature Nominal position (NL)
TR (externally adjustable) +30 to +090C +30 to +100C +40 to +110C approx. 6 C 3 C in upper third of scale +18 to 80C
05.04/00408038
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
Screw-in pocket with fixing screw, without shoulder for hemp sealing, material brass, thread: G, fitting length 120 mm, support tube 15 mm diameter
Note: Physical and toxological properties of the expansion fluid that might escape in the event of a system fracture. Control range with end of scale Dangerous reactions no Fire and explosion hazard Ignition Explosion limit temperature + 355C 0.6 - 8% v/v Water contamination yes irritant yes Toxocological data danger to health
1)
toxic no
< +200C
1)
At present, there is no restrictive statement from the health authorities concerning any danger to health over short periods, and at low concentration, e.g. after a fracture of the measuring system.
(2) ... 051 = Heating thermostat with control range/limit TR +30 to +100C / STB +110C
05.04/00408038
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/8
Type AMTHFs-13
Brief description
Surface-mounting thermostats control and monitor thermal processes. The instruments in the AMTHF series are available with 2, 3 or 4 switching stages as temperature controllers (TR) and temperature monitors (TW). The contact spacing of the individual switching stages (in C) is factory-set according to customer requirements. Surface-mounting thermostats operate on the principle of liquid expansion, with a microswitch serving as the electrical switching device.
Switching action
Temperature controller (TR) and temperature monitor (TW) When the temperature at the probe exceeds the selected setpoint, the microswitch is actuated via a transmission mechanism and the circuit is opened or closed. When the temperature drops below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position. Type AMTHFf-13
Types
Type with rigid stem AMTHFs-13 AMTHFs-133 AMTHFs-1333 AMTHFs-23 AMTHFs-233 AMTHFs-2333 with capillary AMTHFf-13 AMTHFf-133 AMTHFf-1333 AMTHFf-23 AMTHFf-233 AMTHFf-2333 Switching action TR TR TR TW TW TW Switching stage 2 3 4 2 3 4
12.06/00439872
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/8
Technical data
Control range and probe table liquid-filled Control/limit range C Switching differential % 1 2.5 5 7 1 2.5 5 7 1 2.5 5 7 1 2.5 5 7 1 2.5 5 7 1 2.5 5 1 2.5 1 2.5 1 2.5 5 1 2.5 Max. probe temperature C + 050 + 050 + 095 + 100 + 060 + 060 + 105 + 110 + 115 + 115 + 140 + 175 + 125 + 125 + 165 + 200 + 135 + 135 + 170 + 200 + 173 + 173 + 200 + 230 + 230 + 228 + 228 + 300 + 345 + 345 Max. switch head temperature C +050 +050 +050 (80)1 +050 (80)1 +060 +060 +060 (80)1 +060 (80)1 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 +080 Capillary length m Max. contact spacing C 5 8 25 50 5 10 25 50 7 14 35 70 10 20 50 100 8 16 40 80 15 30 75 20 40 15 30 20 40 100 25 50 Pobe length L in mm, probe dia. d in mm dia. 6 = standard 6 8 245 145 245 145 138 91 103 73 283 283 159 117 210 210 121 91 157 157 94 73 188 188 110 84 113 113 72 113 139 105 105 64 87 165 165 101 80 127 127 82 67 100 100 68 58 116 116 76 63 78 78 57 78 92 70 70 49 61
-20 to +040
0 to +050
3 3 5 5 1 1 5 5 2 2 5 5 2 2 5 5 1 1 1 1 1 5 2
+20 to +090
0 to +100
+30 to +110
Values in brackets on request only, taking into account the operating states and required capillary length !
Control range and probe table gas-filled Control /limit range C +20 to +400 +20 to +500 Switching differential % 6 10 3/5 6 10 Max. probe temperature C + 460 + 500 + 530 + 575 + 575 Max. switch head temperature C +080 +080 +080 +080 +080 Capillary length m 5 1 5 5 Max. contact spacing C 75 200 48 95 250 Probe length L in mm, probe dia. d in mm dia. 6 = standard 6 8 237 137 127 81 278 158 176 106 95 65
Capillaries and temperature probes Type AMTHF End of scale up to 200C up to 350C up to 500C up to 350C Capillary length Min. bending radius of capillary
Note:
Capillary Temperature probe copper (Cu), 1.5mm dia. copper (Cu), Mat. Ref. Cu-DHP Mat. Ref. Cu-DHP brazed copper (Cu), 1.5mm dia. st. steel (CrNi), Mat. Ref. 1.4571 Mat. Ref. Cu-DHP brazed st. steel (CrNi), 1.5mm dia. st. steel (CrNi), Mat. Ref. 1.4571 Mat. Ref. 1.4571 welded st. steel (CrNi), 1.5mm dia. st. steel (CrNi), Mat. Ref. 1.4571 Mat. Ref. 1.4571 welded standard is 1000 mm, max. 5000 mm 5 mm
If the max. permissible temperature at the probe, capillary and switch head is not fully utilized, it may be possible to increase the capillary length where it is restricted to 1, 2 or 3 m according to the control range and probe table. Please contact us, specifying the actual temperature to which the thermostat is exposed.
12.06/00439872
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/8
Contact reliability Rated surge voltage Overvoltage category Fusing required Electrical connection Operating data Switching differential in % of control /limit range
2, 3 or 4 single-pole snap-action switches microswitch with changeover contact Switching action (n.c.) break contact (n.o.) make contact Switching differential terminal 2 terminal 4 16 (3) A, 230 V AC +10%, 8 (1.5) A, 230 V AC +10% TR, TW p.f. = 1(0.6) p.f. = 1(0.6) 2,5%, 5%, 6%, 7%, 10% 0.25A, 230 V DC +10% 0.25A, 230 V DC +10% TR, TW 6 (2) A, 230 V AC +10%, p.f. = 1(0.6) 1%, 3% 0.25A, 230 V DC +10% To ensure the highest possible switching reliability, we recommend a minimum loading of: AC / DC = 24 V, 20 mA 1500 V (via switching contacts 400 V) II see Contact rating screw terminals up to 2.5 mm2 conductor cross-section
with liquid-filled measuring system Possible actual value 2.5 max. 3.5 standard 5 max. 6 on request 7 max. 8 on request 1 max. 2 at extra cost with gas-filled measuring system 5 5 max.11 standard 6 6 max. 14 on request 10 10 max. 16 on request 3 2.5 max. 4 at extra cost Contact spacing of scale span Switching point accuracy of minimum maximum contact spacing, % of span 1% 1% 1% 1% according to 2% < 2% control range table < 3% 3%
The contact spacing is specified in C against setpoint of contact I. sign - = switching before setpoint sign + = switching after setpoint For simultaneous switching, specify contact spacing 0. Switching differential in upper third of scale or Switching action at limit liquid-filled gas-filled TR 1%, 2.5% - 1.5% 5% 3%, 5%, 3.0% 7% 6%, 10% 4.0% TW 1%, 2.5% -+0 / -3% 5% 3%, 5%, +0 / -6% 7% 6%, 10% +0 / -8% Deviation of the ambient temperature at the switch head and / or capillary from the +22C calibration ambient temperature will result in a shift of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point for temperatures with end of scale / limit value < 200C 200C +350C 400C +500C TR, TW TR, TW TR, TW switching differential in % 1 / 2.5 5 7 1 / 2.5 5 3/5 6 10 ambient temperature effect on switch head, % per C 0.15 0.26 0.34 0.12 0.21 0.12 0.17 0.24 ambient temperature effect on capillary, % per C per m 0.05 0.09 0.04 0.05 If the operating temperature at the switch head deviates appreciably from the +22C calibration ambient temperature, this can be taken into account in the calibration, at extra charge.
12.06/00439872
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/8
Protection Cable entry Weight Switch head fixing for AMTHFf Series with capillary
color: pebble gray RAL 7032 color: anthracite gray RAL 7015 AMTHF.-2... switching point adjustable with screwdriver, after removing housing cover EN 60 529-IP54 standard: clamping gland M20x1.5, for 8 10 mm cable diameter approx. 0.8 kg M18x1 thread with locknut on housing spigot, capillary exit at housing spigot by 2 screws through housing base, capillary exit at side of housing, cover and base in plastic steel mounting flange, capillary exit at housing spigot wall bracket
Process connection* AMTHFs Series with rigid stem end of scale up to 150C pocket U screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 end of scale above 150C pocket UZ screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and extension, so that the max. permissible ambient temperature +80C at the housing is not exceeded plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe pocket U pocket UZ up to +150C: CuZn is standard above +150C: St is standard above +150C: St is standard (CrNi on request) (CrNi on request) standard lengths: 100, 120, 150, 200 or 300; other lengths on request D = 8 mm, D = 10 mm
Material
Physical and toxicological properties of the expansion media that may escape in the event of a system fracture
Dangerous reactions no no no
Fire/explosion hazard Ignition temp. Explosion C limit % v/v + 355 0.6 8 + 490 no -no
toxic no no no
no
At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations, e.g. after a fracture of the measuring system.
Connection diagrams
AMTHF-133 AMTHF-233
AMTHF-1333 AMTHF-2333
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/8
Dimensions
AMTHFs-1... with pocket U
AMTHFf-1... Switch head mounting with plain cylindrical probe A as standard, no pocket
12.06/00439872
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/8
Dimensions
AMTHFf-2.../r Capillary exit at side of housing, with plain cylindrical probe A, no pocket
12.06/00439872
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/8
Order details
AMTHF Series Order code 603051 (1) Basic type Surface-mounting thermostat , AMTHF series with 2, 3 or 4 single-pole snap-action switches Basic type extension (action) AMTHF.-13 temperature controller, AMTHF.-23 temperature monitor, AMTHF.-133 temperature controller, AMTHF.-233 temperature monitor, AMTHF.-1333temperature controller, AMTHF.-2333 temperature monitor, Style AMTHFswith rigid stem AMTHFfwith capillary Control / limit ranges -20 to +040C 0 to +050C +20 to +090C 0 to +100C +30 to +110C 0 to +150C 0 to +200C +50 to +200C +50 to +250C +50 to +300C +20 to +400C +20 to +500C Switching differential 1% 2.5% of scale span 5% 7% 3% 5% 6% 10% (6) 0 1000 2000 3000 4000 5000 .... (7) 00 40 20
(2) 0013 0023 0133 0233 1333 2333 (3) 1 2 (4) 013 021 041 025 052 027 028 062 063 064 045 046 (5) 10 25 50 70 30 50 60 01
of scale span
Capillary length (in mm) AMTHFs without capillary 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text) Material of capillary AMTHFs without capillary Cu (copper) CrNi (stainless steel 1.4571)
12.06/00439872
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 8/8
Order details
AMTHF Series Order code 10 20 30 (9) 00 13 (8) Process connection* A = plain cylindrical probe (for AM.f only) U = screw-in pocket UZ = screw-in pocket with extension Thread for process connection* no thread (process connection A) external thread G 1/2
00 46 01 20
(10) Material of process connection for process connection A only CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (11) Fitting length S (immersion tube length) AMTHFf without pocket 100mm 120mm 150mm 200mm 300mm 400mm (special length, details in plain text) (12) Diameter D (immersion tube diameter) AMTHFf without pocket 8 mm 10 mm (13) Diameter d (probe diameter) 6 mm 8 mm (14) Extra codes no extra code r switch head mounting by 2 screws through housing base, capillary exit at side of housing, cover and base in plastic b steel mounting flange, capillary exit at housing spigot k wall bracket
00 08 10
6 8
** for other connections and pockets, see Data Sheet 60.6710. Contact spacing for 2-, 3- and 4-pole thermostats: details in plain text (e.g. +2C, +5C, +8C)
Order code (1) 603051 / (2) .... (3) . (4) ... (5) .. (6) .... (7) .. (8) .. (9) .. (10) .. (11) ... (12) .. (13) .. / (14) ... ,
Contact spacing:
12.06/00439872
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 1/9
JUMO heatTHERM-AT
Type 603070, designed as surface-mounting thermostats or room thermostats -Connection technology
Tested according to DIN EN 14597 (replacement for DIN 3440) - At least 250,000 switching operations at TR, TW - Switching point deviation across the entire life of max. 5% Switching capacity 16 A, 230 V Stable switching point position through ambient temperature compensation Degree of protection IP 54
Brief description
High application flexibility and the latest connection technology are the important fitting features of this new range of thermostats. The thermostat housing is suitable for all common installation types like wall mounting, immersion sleeve and contact fastening. It can be used universally and reduces the multiplicity of variations, since a distinction need not be made between different installation types. In these world's first surface-mounting thermostats with "Push-In-terminal technology, the connecting wires are simply inserted into the terminal receptacle till they stop - done! A tool for connecting wires or strands with an end-sleeve is not required and the wiring is more secure. This significantly reduces the cost and time spent as compared to the conventional screw terminal. The "Push-in-technology makes it possible to directly connect loads up to 16A at 230V AC. The installation costs can thus be reduced further owing to overload protection not being required. The maintenance costs get reduced owing to the small interval of <10K from the cut-off point to the restarting point of the safety temperature limiter. The temperature controller (TR), operating temperature monitor (TW), safety temperature monitor (STW) and safety temperature limiter (STB) can be supplied as single or double thermostats. Approvals according to DIN EN 14 597, PED and UL are proof of the high quality standards of this product range. Type 603070/0170 - TR/STB
Switching function
Temperature controller TR and temperature monitor TW If the prevailing temperature at the temperature sensor exceeds the desired (set) value, the snap-action switch gets actuated and the circuit is opened or closed. If the desired value that has been set is undershot (by the switching difference), the snap-action switch is brought back into its starting position. Safety temperature monitor STW If the prevailing temperature at the temperature sensor exceeds the limit value, the snap-action switch gets actuated and the circuit is opened or closed. If the desired value that has been set is undershot (by the switching difference of 10K), the snap-action is brought back into its starting position. In case of destruction of the measurement system, i.e. if the expansion fluid escapes, the pressure in the membrane drops and permanently opens the circuit. Upon cooling of the sensor to a temperature below approx. -20C, the same circuit opens, but closes again automatically when the temperature increases. Safety temperature limiter STB If the temperature prevailing at the temperature sensor exceeds the value that has been set, the snap-action switch is actuated, the circuit opens or closes and the snap-action switch gets mechanically locked. Upon undershooting the limit value temperature by 10K, the snap-action switch can be unlocked manually again. In case of destruction of the measurement system, i.e. if the expansion fluid escapes, the pressure in the membrane drops and permanently opens the circuit. Unlocking is not possible any more. Upon cooling of the sensor to a temperature below approx. -20C, the same circuit opens, but closes again automatically when the temperature increases.
Type 603070/0002-TW
Approvals
01.08/00485234
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 2/9
Technical Data
Housing
Lower part of housing: Color: Housing cover: Color: TR TW, STW, STB PA (strengthened) silver-gray RAL 7001 ABS with inspection glass (PMMA) cobalt blue RAL 5013
Electrical data
Contact type Switching capacity
snap-action switch with single-pole toggle contact TR, TW, STW STB At the break contact (contact track 1-2): At the break contact (contact track 1-2): AC 230 V +10%, 16 (2.5) A, cos = 1(0.6) AC 230 V +10%, 16 (2.5) A, cos = 1(0.6) DC 230 V +10%, 0.25 A DC 230 V +10%, 0.25 A At the signal contact (contact track 1-4): At the make contact (contact track 1-4): AC 230 V +10%, 6.3 (2.5) A, cos = 1(0.6) AC 230 V +10%, 2 (0.4) A, cos = 1(0.6) DC 230 V +10%, 0.25 A DC 230 V +10%, 0.25 A -Contact (plug-in terminal) "Push-In"-terminal technology: patented connection technology from Weidmller GmbH & Co. KG, Detmold 0.75 ... 2.5 mm2 fine-wired, fine-wired with end sleeve for strands) For ensuring as high a switching security as possible, we recommend a minimum load of: AC / DC = 24 V, 100 mA with silver contacts.
Operations data
Switching point accuracy
TR, TW Switching difference 2.5% STW, STB with a setting range of +70C...+130C in the first half in the upper half (+70...+100C) (+100...+130C)
Temperature compensation
In the upper third of the scale 1.5%, +0 / -12K +0 / -5K at the beginning of the scale 6% In case of deviation of the ambient temperature at the switch button and the long-distance cable from the adjusted room temperature +22C, there results a displacement of the switching point of about 0.1K/K (Change in switching point referred to the change in the ambient temperature, measured at a limit value +120C fixed and long-distance cable length of 2000 mm). Thanks to the standard temperature compensation feature, this switching point displacement is reduced to a minimum. for transport and storage: -30...+50C during use: max. +80C in case of pipe mounting, max. pipe temperature +120C according to DIN 16257, NL 0...NL 90 (other nominal positions on inquiry) DIN DGRL UL DIN EN 14597 TR 119107, TW 119207, STW (STB) 119307, STB 119407 Pressure Equipment Directive 97/23/EC applied for, only STW and STB Underwriter Laboratories applied for, upon inquiry
Connection pattern
STB:
1 2 4
1 2 4
01.08/00485234
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 3/9
120
70
150
G1/2 100
15
40-120mm
Type
Control range C
Sensor x length in mm
Switching difference
Process connection
Contact sensor, with extendable long-distance cable 0...+120 2000 6 x 87 approx. 3K 60/60003164 Protection tube U 4, Brass, nickel-plated Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7. heatTHERM-AT / 0001
Temperature monitor TW
Type 603070/ 0002 Degree of protection IP 54 Compensation of the ambient temperature Checking the switching value through a window in the housing cover
53
22
120
58
150
G1/2
100
15
40-120mm
Type
Control range C
Sensor x length in mm 6 x 87
Switching difference
Process connection
Contact sensor, with extendable long-distance cable 60/60003166 Protection tube U 4, Brass, nickel-plated Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7. heatTHERM-AT / 0002 0...+120 approx. 3K
01.08/00485234
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 4/9
120
58
150
G1/2 100
Type
Sensor x length in mm
Switching difference
Protection tube U 4, heatTHERM-AT / +70...+130 2000 6 x 60 approx. 10K Brass, nickel-plated 0020 Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7.
Safety-temperaturelimiter STB
Type 603070/ 0070 Degree of protection IP 54 Checking the switching value through a window in the housing cover Switching point acknowledgment possible from the outside Compensation of the ambient temperature Retrospective sealing of the housing cover Capillary break protection
53 22
4,5
63
120
150
G1/2 100
Type
Sensor x length in mm
Release difference
15
Protection tube, 8 x 100 mm, heatTHERM-AT / +70...+130 2000 6 x 60 approx. 10K brass, nickel-plated 0070 Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7.
01.08/00485234
15
Process connection
Process connection
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 5/9
4,5
70
17
Sales no.
Type
Sensor x length in mm
Switching difference
Process connection
60/60003159 heatTHERM-AT / -10...+40 --1.5 - 2K Helix sensor 0001 60/60003161 0...+50 Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7.
4,5
58 120
Sales no.
Type
Control range C
150
Sensor x length in mm
94
Switching difference
Process connection
60/60003160 heatTHERM-AT / -10...+40 --1.5 - 2K Helix sensor 0002 60/60003162 0...+50 Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7.
01.08/00485234
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 6/9
95
150
53
70
15
100
G1/2
8 16,5
Limit value Long-distance Sensor x length Switching Process connection rangeC cable length in mm in mm difference 60/60003169 heatTHERM-AT / (TR) 0...+120 6 x 87 (TR) approx. 3K Protection tube U 4, 2000 0120 Brass, nickel-plated (STW) 70...+130 6 x 60 (STW) approx. 10K Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7. Sales no. Type
120
150
53
70
15
G1/2
100
8 16,5
Limit value Long-distance Sensor x length Switching Process connection rangeC cable length in mm in mm difference 6 x 87 (TR) approx. 3K 60/60003170 heatTHERM-AT / (TR) 0...+120 Protection tube U 4, 2000 0170 Brass, nickel-plated (STB) 70...+130 6 x 60 (STB) approx. 10K Other models (control range, switching differential, process connection) on request Minimum order quantity 50 pieces. Protection tube: see page 7. Sales no. Type 01.08/00485234
120
22
22
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 7/9
(2)
( 1 ) Wrench size, SW 22 ( 2 ) Sealing collar ( 3 ) Fitting length, EL Sales no. Type Abbreviation Connection
(3)
Fitting length EL Material (mm) 100 Brass / nickel-plated 60/60003177 Threaded pro60/60003171 tective pipe with 200 Brass / nickel-plated U4 G 60/60003172 sealed joint and 100 Stainless steel / 1.4571 retaining clip 60/60003173 200 Stainless steel / 1.4571 In case of combination of the protection tube with the standard bearing designs heatTHERM-AT, the model should be selected as contact sensor. Other models (thread type, immersion tube length, process connection) on request 2 Minimum order quantity 50 pieces.
( 1 ) Wrench size, SW 22 ( 2 ) Sealing collar ( 3 ) Fitting length, EL Fitting length EL Material (mm) 100 Brass / nickel-plated 60/60003178 Threaded pro60/60003174 tective pipe with 200 Brass / nickel-plated U4 G 60/60003175 sealed joint and 100 Stainless steel / 1.4571 retaining clip 60/60003176 200 Stainless steel / 1.4571 In case of combination of the protection tube with the standard bearing designs heatTHERM-AT, the model should be selected as contact sensor. Other models (thread type, immersion tube length, process connection) on request 2 Minimum order quantity 50 pieces. Sales no. Type Abbreviation Connection
01.08/00485234
(3)
15
15
G 1/2
G 1/2
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 8/9
Ordering data:
Surface-mounting thermostat type 603070 Order code 603070 (1) Basic type heatTHERM-AT with single-pole snap-action switches Basic type enhancement Temperature controller (TR)
TR
(2) 0001
0002
0020
0070
0120
Temperature controller / Safety temperature limiter (TR / STB) Design Surface-mounting thermostat, with protection tube, long-distance cable or as contact sensor (only single thermostat) Room thermostat, with helix sensor Regulation range/ Limit value range 1 -10+040C (TR, TW) 0+050C (TR, TW) 0+120C (TR, TW) +070+130C (STW, STB) other regulation ranges/ limit value ranges up to +350C on request Regulation range/ Limit value range 2 +70+130C adjustable (STW, STB) other regulation ranges/limit value ranges, fixed setting, up to +350C available upon request Switching difference Without switching difference (STB) approx. 3K (TR, TW) approx. 10K (STW) Long-distance cable length 0000 mm (only in case of room thermostat) 2000 mm Special length (specification in plain text stepping 500 mm) Material of long-distance cable Copper (Cu) Stainless steel (CrNi, 1.4571)
(5) 671
01.08/00485234
JUMO GmbH & Co. KG Office address: Moritz-Juchheim-Strae 1, 36039 Fulda, Germany Address for deliveries:Mackenrodtstrae 14, 36039 Fulda, Germany Mailing address: 36035 Fulda, Germany
+49 661 6003-716 +49 661 6003-504 mail@jumo.net www.jumo.net Data sheet 60.3070 Page 9/9
Ordering data:
Surface-mounting thermostat type 603070 Order code 10 15 20 (9) Process connection (PA) A H U = Smooth round sensor = Helix sensor = Threaded protection tube = with sealing collar
00 13
(10) Threaded process connection (PA) Without thread (process connection "A" and "H") Outer thread G 1/2 (11) Material, process connection (PA) Only in case of process connection "A" Brass CuZn Stainless steel CrNi, 1.4571 (12) Fitting length "S" (immersion tube length) Only in case of process connection "A" and "H" 100mm Special length on request (13) Diameter "d" (immersion tube diameter) Only in case of process connection "A" and "H" 8 mm (14) Diameter "d" (sensor diameter) 06 mm 17 mm Helix sensor in case of room thermostat (15) Extra codes (TZ)1 Without extra codes Degree of protection of housing IP54 Retaining strap for contact sensor
00 46 20
00 100 ....
00 8
6 17
(2) / / 0001 /
(3) 5
(4) - 021 -
(5) 671 -
(6) 70
(7) - 2000 -
(8) 40 -
(9) 10 -
(10) 00 -
(11) 00 -
(12) 00 -
(13) 00 -
(14) / 6
(15) / 0001
List the extra codes one after another and separate them by commas.
01.08/00485234
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Switching action
Temperature controller TR and temperature monitor TW If the temperature at the probe exceeds the set limit, the circuit is opened through a snap-action switch. If the temperature falls below the set limit (by the switching differential), the switch returns to its initial position.
ATHR-1
Types
Single thermostats ATHR-1 temperature controller TR switching point externally adjustable ATHR-2 temperature monitor TW switching point adjustable after removing case cover Twin thermostats ATHR-11 2 x temperature controller TR ATHR-12 1 x temperature controller TR / 1 x temperature monitor TW ATHR-22 2 x temperature monitor TW
ATHR-22
Technical data
Electrical data Switching element Max. contact rating Operating data Control ranges Switching point accuracy Switching differential Permissible ambient temp. Permissible storage temp. Nominal position (NL) Case Case Case fixing Cable entry Enclosure protection Temperature probe Weight approx. 0.35 kg plastic case in impact-resistant polycarbonate color: cover pebble gray RAL 7032, base anthracite gray RAL 7016 by 2 screws on inside of case as standard: clamping gland M 20 x 1.5, for 8 10 mm cable diameter EN 60 529-IP54 1 or 2 coiled probe(s), tinned copper approx. 0.65 kg 0 to +50C or -10 to +40C 0.5C at 20C 0.5 1.5C in operation: -20 to +60C -50 to +50C to DIN 16 257, NL 0 NL 90 (other NL on request) Single thermostat 1 microswitch with changeover contact Twin thermostat 2 microswitches with changeover contact
09.02/00073239
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
Dimensions
ATHR-1
23
ATHR-22
94
35
70
35
105 67
196 120
100
92
72
45
6.5
Connection diagrams
Single thermostat
6.5
4.5
4.5
Twin thermostat
Order details:
ATHR series Order code 604024 01 02 11 12 22 (3) 16 21 Order code (1) / Order example 604024 / (1) (2) Basic type room thermostat Typ ATHR Basic type extension ATHR-1 1 x temperature controller TR, switching point externally adjustable ATHR-2 1 x temperature monitor TW, switching point adjustable after removing case cover ATHR-11 2 x temperature controller TR, switching point externally adjustable ATHR-12 1 x temperature controller TR, switching point externally adjustable, 1 x temperature monitor TW, switching point adjustable after removing case cover ATHR-22 2 x temperature monitor TW, switching point adjustable after removing case cover Control / limit ranges -10 to + 40C 0 to + 50C
(2) ..
(3) ..
01
21
= thermostat with microswitch and changeover contact, 1 x temperature controller TR, = switching point externally adjustable, 0 to + 50C = thermostat with microswitch and changeover contact, = 1 x temperature controller TR, switching point externally adjustable, = 1 x temperature monitor TW, switching point adjustable after removing case cover, -10 to + 40C
604024
12
16
09.02/00073239
72
71
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Switching action
TR and TW If the temperature at the probe exceeds the set limit, the circuit is opened through a snap-action switch. If the temperature falls below the set limit (by the switching differential), the switch returns to its initial position.
AMRc-1
Types
AMRc-1 temperature controller TR switching point externally adjustable AMRc-2 temperature monitor TW switching point adjustable after removing case cover
AMRc-2
Technical data
Electrical data Switching element Max. contact rating 1-pole microswitch with changeover contact 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25 A, 230 V DC +10%, max. permissible starting current: break contact: 16 A make contact: 10 A via terminal strip, after removal of case cover
Electrical connection Operating data Control ranges Switching point accuracy Switching differential Permissible ambient temp. Permissible storage temp. Nominal position (NL) Case Case Case fixing Cable entry Protection Temperature probe Weight
0 to +50C or -10 to +40C 0.75C at +20C 1 2C in operation: -20 to +60C -50 to +50C to DIN 16 257, NL 0 NL 90 (other NL on request)
plastic case in impact-resistant polycarbonate color: cover pebble gray RAL 7032, base anthracite gray RAL 7016 by 2 screws on inside of case as standard: clamping gland M 20 x 1.5, for 8 10 mm cable diameter EN 60 529-IP54 coiled probe, tinned copper approx. 0.32 kg
02.05/00073242
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
Dimensions
AMRc-1 AMRc-2
Connection diagram
Order details
AMRc series Order code 604041 01 02 (3) 016 021 Order code (1) 604041 (1) (2) Basic type room thermostat Typ AMRc Basic type extension AMRc-1 temperature controller (TR), switching point externally adjustable with rotary knob AMRc-2 temperature monitor (TW), switching point adjustable with screwdriver, after removing case cover Control / limit setting ranges -10 to + 40C 0 to + 50C (2) .. 16 (3) ... 016 = Temperature monitor (TW), = switching point adjustable with screwdriver, after removing case cover, -10 to +40C
02.05/00073242
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Brief description
The room thermostat Type AMFRc-1333 is a 4-stage temperature controller with a high response accuracy. The wiring has been laid out for fan control by different speed stages. The contact spacing of the individual switching stages in C is permanently set in the factory to customer specification. Room thermostats operate on the principle of liquid expansion, with a microswitch serving as the electrical switching device.
Switching action
If the temperature at the temperatur probe exceeds the selected setpoint, the microswitch is operated through a mechanism and the circuit is opened or closed. When the temperature falls below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position.
Technical data
Electrical data Electrical connection Switching device Max. contact rating via terminal board, after removal of cover, temperature controller and terminal board are mounted on a pcb and electrically wired up in accordance with the connection diagram 4 single-pole snap-action switches with changeover contact 10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25 A, 230 V DC +10%, max. permissible starting current: break contact: 16 A make contact: 10 A -10 to +40C or 0 to +50C setpoint: 0.75 C at 20C, contact spacing: 0.25 C The contact spacing is defined The switching stages are assigned to be below the setpoint. in C relative to the setpoint The contact spacing of the 3 switching stages is specified in C (contact I). relative to the setpoint. 10 C max. / 0.5 C min. (For example, -1C/-2C/-3C, i.e. with a setpoint selection +20C and rising temperature, the first stage switches at +17C, the second stage at +18C, the third stage at +19C and the fourth stage at the setpoint +20C). approx. 1.2 C in operation -20 to +60C -50 to +50C to DIN 16 257, NL 0 NL 90 (other NL on request) plastic housing in impact-resistant polycarbonate color: cover pebble gray RAL 7032, base anthracite RAL 7016 by 2 screws inside housing standard: clamping gland M20 x 1.5, for 8 10 mm cable diameter EN 60 529-IP54 coiled probe, tinned copper approx. 0.5 kg
Switching differential Permissible ambient temp. Permissible storage temp. Nominal position (NL) Housing Housing Housing fixing Cable entry Enclosure protection Temperature probe Weight
02.05/00415044
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
1)
Fire / explosion hazard Water Toxicological data contamination Ignition Explosion irritant danger to toxic temperature C limit % v/v health 1) no no + 355 0.6 8 yes yes At present there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentration, e.g. after a fracture of the measuring system. Switching action The setpoint is at contact I. If this setpoint is set to +28C, for instance, and the room temperature is below +20C, then the fan operates with the lowest transformer voltage. This lowest transformer voltage is on terminal 5. In this case, the current flows from terminal 5 via the contacts IV, III, II and I to terminal 6, or to the fan. If the room temperature rises to +20C, then stage IV switches over and the next-higher transformer voltage, terminal 4, is switched through to the fan. On reaching +23C, the voltage from terminal 3 is switched through, at +25C from terminal 2 and at +28C from terminal 1 (mains supply voltage). With falling temperature, the switchover takes place in reverse order, but lower than the corresponding setpoint by the amount of the switching differential of the thermostats (1.2C). Switching sequence with rising temperature Contact Follow-on contact IV III II e.g. -8C e.g. -5C e.g. -3C
Dangerous reactions
Connection diagram
Con-
Setpoint I q
Dimensions
3,5 18 71
155 120 100 M20x1,5
Order details
Available from stock Sales No. 60/60000406 Type AMFRc-1333 Control range C 0 to +50
94
72
4,5
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Switching action
TR and TW If the temperature at the probe exceeds the set limit, the circuit is opened through a snap-action switch. If the temperature falls below the set limit (by the switching differential), the switch returns to its initial position.
AMDR-1
Types
AMDR-1 AMDR-2 Temperature controller TR, switching point externally adjustable Temperature monitor TW, switching point adjustable after removing the screw plug
AMDR-2
Technical data
Electrical data Switching element Max. rating 1-pole microswitch with changeover contact terminal 2: 16 (3) A, 230 V AC +10%, p.f. = 1 (0.6) terminal 4: 8 (1.5) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25 A, 230 V DC +10% max. starting current: 16 A, p.f. = 0.6 after removing housing cover, at screw terminals up to 2.5mm2 conductor cross-section 0 to +50C or -10 to +40C 0.75C at +20C 1 2C in operation: -20 to +60C -50 to +50C to DIN 16 257, NL 0 NL 90 (other NL on request)
Electrical connection Operating data Control ranges Switching point accuracy Switching differential Permissible ambient temp. Permissible storage temp. Nominal position (NL) Housing Housing Housing fixing Cable entry Enclosure protection Temperature probe Weight
plastic housing in impact-resistant polycarbonate color: cover gray beige, RAL 1019; base/setpoint knob light brown RAL 8025 by 2 screws on the inside of housing as standard: clamping gland M 20 x 1.5, for 8 10 mm cable diameter IP54 to EN 60 529 coiled probe, tinned copper approx. 0.35 kg
03.05/00085842
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
Dimensions
35
18,5
65
67
94
71
Connection diagram
L1 N PE
Order code
(1) 604046 / (2) .. 02 (3) ... 016 = Temperature monitor (TW), = switching point adjustable with screwdriver after removing the screw plug, -10 to +40C Order example 604046 /
03.05/00085842
105
4,5
34
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
WTHc-2280
Switching action
Temperature controller TR and temperature monitor TW When the temperature at the probe exceeds the selected setpoint, the microswitch is operated via the transmission mechanism and the circuit is opened or closed. When the temperature drops below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position. Lock-out facility on the safety temperature limiter STB If the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has fallen below the critical temperature by about 10 C, the microswitch can be reset manually. Self-monitoring facility on the safety temperature limiter STB In the event of a measuring system failure, i.e. if the expansion liquid has leaked, then the pressure on the diaphragm of the STB drops and the electrical circuit is permanently open. It is no longer possible to reset the system. When the temperature at the probe falls below -20C, the circuit is also opened, but will close again automatically when the temperature rises.
WTHc-2280-SW
TR/TW/STB
Technical data
Control ranges and limit Control range / limit Fan controller TR System 2 +20 to +80C Burner monitor TW System 2 +70 to +90C Protection temperature limiter STB System 80 or 40 limit 100C
Capillary and temperature probe Capillary material: copper (Cu), Mat. Ref. 2.0090 diameter: 1.5 mm capillary length including probe: 0350 mm with support tube 1250 mm without support tube 1 minimum bending radius: 5 mm material: copper (Cu), Mat. Ref. 2.0090, brazed diameter: 3 probes 4 mm 1 probe coding on version with capillary: fan controller TR: red, burner monitor TW: blue
Temperature probe
06.07/00332482
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Safety temperature limiter STB System 40/U microswitch with break (n.c.) contact, lock-out and additional signal contact
Max. contact rating Electrical connection Operating data Switching differential Switching point accuracy
10 (2) A, 230 V AC +10%, p.f. = 1 (0.6) 0.25A, 230 V DC +10% via terminal strip, after removing housing cover; temperature controller and terminal strip are mounted on a printed circuit board (epoxy-resin glass fiber) fan controller TR burner monitor TW in upper third of scale or at limit setting 4C 4C +0 -5 C on switch head: 0.35 C per C on capillary: per meter: 0.07 C per C air in air: 120 sec at the temperature probe: +200C -50 to +50 80C max. to DIN 16 257, NL 0 NL 90 (other NL on request) 14 2C 06 1C at start of scale 6C 4C ---
Switching action: Switching action: fan controller TR burner monitor TW safety temperature limiter STB
Ambient temperature effect Operating medium Time constant Safe overtemperature Permissible storage temperature Permissible ambient temperature in use Nominal position (NL) Housing standard Extra code SW Setpoint adjustment
housing cover: polycarbonate base: sheet steel, zinc-plated housing cover: polycarbonate, impact-resistant base: die-cast aluminium, painted safety temperature limiter STB: fixed factory setting standard EN 60 529 - IP40 2 push sockets by 2 screws through housing base
color: pebble gray RAL 7032 color: anthracite gray RAL 7015 fan controller TR and burner monitor TW: switching point adjustable with screwdriver, after removing housing cover with extra code /SW EN 60 529 - IP54 clamping nipple M 20 x 1.5, for 8 10 mm cable dia. by 2 screws at the flange of the support tube, then by one screw at the hexagon of the support tube approx. 0.7 kg
Note: Physical and toxicological properties of the expansion fluid that may escape in the event of a system fracture. Control range with end of scale +200C Dangerous reactions no Fire and explosion hazard Ignition Explosion limit temperature + 355C 0.6 8 % v/v Water contamination yes irritant yes Toxicological data danger to health
1
toxic no
1 At present, there is no restrictive statement from the health authorities concerning any danger to health over short periods and at low concentrations,
Connection diagrams
(1)
1
(2)
1
(3)
1
(1)
1
(2)
1
II
(3)
1
I
WTHc-2240/U WTHc-2240-SW/U
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Dimensions
WTHc-2280 WTHc-2240/U IP40 protection
101
111 8
View A
~85 71
15
Drilling diagram
Style 1 with support tube, switch head mounted by 2 screws through housing base, extra code r
16.5
View A
120
94
15
71
10 200
1
1250 +100 -20
350 +0 -40
10
4.5
65
Drilling diagram
Style 2 no support tube, switch head fixing by mounting flange in CuZn (brass), extra code b with capillary, process connection A 1probe coding: fan controller TR: RED; burner monitor TW: BLUE
Style 1 with support tube, process connection UOF, mounting flange with support tube
06.07/00332482
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
Stock items
Sales No. 60/60002161 60/60002162 60/60002658 Type WTHc-2280 WTHc-2280 WTHc-2280-SW Control range C TR = +020 to +80 TW = +070 to +90 STB = +100 fixed 0- 1250 --
Order details
Warm-air thermostats, WTHc series Order code 604514 2280 2240 (1) (2) Basic type Warm-air thermostat, WTHc series Basic type extensions WTHc-2280 temperature controller TR and temperature monitor TW with changeover contact, safety temperature limiter STB with break (SPST-NC) contact and lock-out WTHc-2240 temperature controller TR and temperature monitor TW with changeover (SPDT) contact, safety temperature limiter STB with break (SPST-NC) contact, lock-out and additional signal contact (with extra code U only) Style with support tube without support tube, with capillary Control / limit range for temperature controller1 +20 to +80C Control / limit range for temperature monitor1 +70 to +90C Limit for safety temperature limiter1 +100C Capillary length style 01, without capillary 1250 mm (special length, details in mm, max. 5000 mm) Process connection (PA) switch head mounting r, Style 01 A = plain cylindrical probe (on Style 02 only) UOF = mounting flange with support tube Fitting length S (immersion tube length) Style 02, with capillary 350 mm (special length, details in mm)
(3) 1 2 (4) 040 (5) 070 (6) 100 (7) 0 1250 .... (8) 00 10 26 (9) 000 350 .... 4 000 574 718 711 764
(10) Probe diameter 4 mm (11) Extra codes2 no extra code U STB with break (n.c.) contact, lock-out and additional signal contact (on type WTHc-2240 only) SW housing with IP54 rating, protected against dust and splashing water r switch head mounting by 2 screws through housing base b mounting flange in CuZn (brass)
/ /
(3) . 1
(7) . 0
(8) .. 26
(10) . 4
/ /
other control /limit ranges on request List extra codes in sequence, separated by commas.
06.07/00332482
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
Ex marking
II 2G EEx ed IIC T6 II 2D IP65 T80C for explosive gas atmospheres for explosive dust atmospheres
Explosion protection
II 2G Equipment group II, Category 2, Equipment for explosive gas atmospheres II 2D Equipment group II, Category 2, Equipment for explosive dust atmospheres Type of explosion protection: EEx ed IIC T6 EEx General requirements e Increased safety d Flameproof enclosure IIC Gas group T6 Temperature class IP65 T80C Application in combustible dusts IP65 T80C
Euronorm EN 50 014 / VDE 0170 / 0171 Part 1 Euronorm EN 50 019 / VDE 0170 / 0171 Part 6 Euronorm EN 50 018 / VDE 0170 / 0171 Part 5
Euronorm EN 50 281-1-1 / VDE 0170 / 0171 Part 15-1-1 Protection to EN 60 529-IP65 Max. permissible surface temperature (use in combustible dusts)
Switching action
Temperature monitor TW and fail-safe temperature monitor STW If the temperature at the probe exceeds the selected setpoint, the microswitch is operated through a mechanism, and the circuit is opened or closed. If the temperature falls below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position. Self-monitoring facility on the fail-safe temperature monitor STW A failure of the measuring system, i.e. when the expansion liquid escapes, will cause the pressure under the diaphragm to drop (STW), thus permanently opening the circuit. The thermostat can no longer be reset. If the probe cools down to a temperature in accordance with the control range table, e.g. below -20C, the circuit will also open. The STW is reset automatically.
12.04/00073252
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Technical data
Control ranges and probe table Control range C Switching point accuracy in upper third of scale * TW STW Maximum capillary length mm Maximum probe temp. to DIN 3440 C STW opens at probe temp. below (C): -30 -10 -10 -10 -10 -20 -30 -30 -30 Probe length L for d = 6 mm TW 153 202 117 135 107 090 067 --237 STW 132 172 102 117 094 078 060 202 149
+00,0C +00,0C -20 to +050 +060 - 03,0C - 03.5C +00,0C +00,0C +060 -20 to +050 - 02,0C - 02.5C +00,0C +00,0C -20 to +100 +115 - 04,0C - 05,0C +00,0C +00,0C +40 to +120 +140 5000 - 03,0C - 04,0C +00,0C +00,0C +230 +50 to +200 - 06,0C - 08,0C +00,0C +00,0C +80 to +250 +300 - 07,0C - 08.5C +00,0C +00,0C +50 to +300 +345 - 10,0C - 12.5C +00,0C +00,0C 1000 +460 +20 to +400 - 15,0C - 19,0C +00,0C +00,0C 2000 +550 +20 to +500 - 19,0C - 24,0C * The switching point accuracy can be shifted to a different part of the scale, to special order. Capillary and temperature probe Type ATH-Ex-.. End of scale up to 200C Capillary 1.5mm dia. copper (Cu) Mat. Ref. 2.0090 electrotinned
up to 300C up to 500C up to 300C Capillary length Min. bending radius of capillary Electrical data Switching device Contact rating Electrical connection
Temperature probe copper (Cu) Mat. Ref. 2.0090 brazed electrotinned copper (Cu) stainless steel (CrNi) Mat. Ref. 2.0090 Mat. Ref. 1.4571 electrotinned brazed stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 Mat. Ref. 1.4571 welded stainless steel (CrNi) stainless steel (CrNi) Mat. Ref. 1.4571 Mat. Ref. 1.4571 welded 1000 mm is standard, max. 5000 mm 5 mm
Notes
at extra cost
microswitch in flameproof enclosure with changeover contact 5 A, 230 V AC +10%, p.f. 0.9 screw terminals in housing, suitable for conductor cross-section up to 2.5 mm2
12.04/00073252
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Ranges with end of scale 350C Ranges with end of scale > 350C Switching action Nominal value Possible Switching action Nominal value Possible measured value measured value TW 3 3-5 TW 5 5-9 STW 5 5-7 STW 6 6-11 A deviation of the ambient temperature at the housing from the calibrated ambient temperature 22C will result in a displacement of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point surface-mounting thermostats with end of scale < 200C 200C 350C > 350C 500C TW STW (STB) TW STW (STB) TW STW (STB) on thermostat head %/C 0.08 0.17 0.06 0.13 0.14 0.12 on capillary %/C per meter 0.047 0.054 0.09 0.11 0.04 0.03 -50 to +50C max. min. Capillary Thermostat head +50C +50C -40C -20C -20C -20C -40C -20C to DIN 16257, NL 0 NL 90 (other NL on request) with end of scale < 200C 200C 350C > 350C 500C
Nom. position (NL) Housing Material Limit setting Protection Cable entry Weight Thermostat mounting Process connection*
black polyester housing, glass-fiber reinforced, with lead-sealable screws limit adjustable at setpoint spindle, after removal of housing cover EN 60 529-IP65 Ex cable gland M 20 x 1.5, for cable diameters 6 12 mm approx. 0.6 kg by 4 screws, after removal of housing cover
plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe Material up to +150C: CuZn is standard above +150C: St is standard Pocket U (CrNi on request) Fitting length S standard lengths: 100, 120, 150, 200 or 300 mm (other lengths on request) Immersion tube dia. D = 8 mm *for other process connections and pockets, see Data Sheet 60.6710 (US, UO, Q and V only). Note Physical and toxicological properties of the expansion media that may escape in the event of a measuring system fracture. Fire/explosion hazard Water Toxicological data contamination Ignition Explosion irritant danger to temp. C limit %v/v health 1) < +200C no + 355 0,6 8 yes yes 1) 200C +350C no + 490 -yes yes > 350C +500C no no no no no no At present there is no statement from the health authorities concerning any danger to health over short periods and at low concentration, e.g. after a fracture of the measuring system. Control range with end of scale Dangerous reactions toxic no no no
1)
12.04/00073252
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Connection diagram
ATH-Ex-..
1 4
Dimensions
ATH-Ex-..
ATH-Ex-20 ATH-Ex-20
110
56
75
29
(1)
(2)
45
98
(1) = Ex cable gland, M20x1.5x6-12 (2) = Ex cable gland For other process connections and pockets, see Data Sheet 60.6710 (U, US, UO, Q and V only).
Stock items
Sales No. 60/60001242 60/60001243 60/60001244 60/60001246 60/60001247 60/60001248 Type ATH-Ex-2 ATH-Ex-2 ATH-Ex-2 ATH-Ex-2 ATH-Ex-20 ATH-Ex-20 Control range C 20+ 50 0+ 50 +40+120 +50+300 +40+120 +50+300 Material of measuring system CrNi CrNi CrNi CrNi CrNi CrNi
12.04/00073252
4,5
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Order details
ATH-Ex Series Order code 605041 02 20 (3) 014 021 025 056 062 080 064 045 046 (4) 1000 2000 3000 4000 5000 .... (5) 40 20 (6) 10 20 (7) 00 13 (8) 00 46 01 20 (9) 000 100 120 150 200 300 400 00 8 6 Order code (1) 605041 / (1) (2) Basic type Surface-mounting thermostat for hazardous areas, ATH-Ex series Basic type extension ATH-Ex-2 Temperature monitor TW ATH-Ex-20 Fail-safe temperature monitor STW Control / Limit ranges C -20 to +050 +00 to +050 +00 to +100 +40 to +120 +50 to +200 +80 to +250 +50 to +300 +20 to +400 +20 to +500 Capillary length 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm (special length, details in plain text) Material of capillary Cu copper, electrotinned (only up to +300C) CrNi stainless steel 1.4571 Process connection (PA) A = plain cylindrical probe (standard) U = screw-in pocket Thread for process connection no thread (process connection A) male thread G 1/2 Material of process connection only for process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) Fitting length S (immersion tube length) ATH-Ex without pocket 100mm 120mm 150mm 200mm 300mm 400mm
(10) Diameter D (immersion tube dia.) ATH-Ex without pocket 8 mm (11) Diameter d (probe dia.) 6 mm
(2) .. -
(3) ... -
(4) .... -
(5) .. -
(6) .. -
(7) .. -
(8) .. -
(9) ... -
(10) .. -
(11) .
12.04/00073252
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
Brief description
ATH-EXx Series surface-mounting thermostats with explosion protection control and monitor thermal processes. They can be used directly in the hazardous area, in Zone 1 and Zone 21. The thermostats can be supplied as temperature monitors TW, temperature limiters TB, failsafe temperature monitors STW and fail-safe protection temperature limiters STB. The thermostats operate on the principle of liquid or gas expansion. The electrical switching device is a microswitch inside a flameproof enclosure.
Ex marking
II 2G EEx ed IIC T6 or T5 for potentially explosive gas atmospheres II 2D IP65 T80C for potentially explosive dust atmospheres
Explosion protection
II 2G Equipment group II, Category 2, Equipment for potentially explosive gas atmospheres II 2D Equipment group II, Category 2, Equipment for potentially explosive dust atmospheres Type of protection: EEx ed IIC T6 EEx General requirements European Standard EN 50 014 / VDE 0170 / 0171 Part 1 e Increased Safety European Standard EN 50 019 / VDE 0170 / 0171 Part 6 d Flameproof enclosure European Standard EN 50 018 / VDE 0170 / 0171 Part 5 IIC Gas group T6 Temperature class IP65 T 80C Application in combustible dusts European Standard EN 50 281-1-1 / VDE 0170 / 0171 Part 15-1-1 IP65 Enclosure protection to EN 60 529-IP65 T 80C Max. permissible surface temperature (application in combustible dusts)
12.05/00337574
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Switching action
Temperature monitor TW and fail-safe temperature monitor STW If the temperature at the probe exceeds the selected setpoint, the microswitch is operated via the transmission mechanism and the circuit is opened or closed. When the temperature drops below the selected setpoint (by the amount of the switching differential), the microswitch returns to its initial position. Lock-out facility on the temperature limiter TB and fail-safe protection temperature limiter STB If the temperature at the probe exceeds the set limit, the circuit is opened and the microswitch is locked out mechanically. After the temperature has fallen below the critical temperature by about 10 % of the scale span (about 15% for limit setting > 350C), the microswitch can be manually reset. Self-monitoring on the fail-safe temperature monitor STW and fail-safe protection temperature limiter STB In the event of a measuring system failure, i.e. if the expansion liquid has leaked, the pressure on the diaphragm of the STB and STW drops, thus permanently opening the electrical circuit. It is no longer possible to reset the system. If the probe cools down to a temperature given by the control range table, e.g. below -20C, the circuit will also open. When the temperature rises above -20C, the STB must be reset manually. On the STW, the reset is performed automatically.
Technical data
Control ranges and probe table Control range Switching point accuracy in upper third of scale 1 TW, TB STW, STB Maximum capillary length (mm) Maximum probe temperature to DIN 3440 C STW + STB opens at probe temp. below C -30 -10 -10 -10 -10 -20 -30 -30 -30 -30 Probe length L for d = 6 mm TW TB 142 185 107 125 101 082 063 278 148 202 STW STB 115 149 089 103 083 068 053 176 127 202
C -20 to +050
+00,0C +00,0C +060 - 03,0C - 03.5C +00,0C +00,0C -20 to +050 +060 - 02,0C - 02.5C +00,0C +00,0C +115 -20 to +100 - 04,0C - 05,0C +00,0C +00,0C +40 to +120 +140 5000 - 03,0C - 04,0C +00,0C +00,0C +50 to +200 +230 - 06,0C - 08,0C +00,0C +00,0C +300 +80 to +250 - 07,0C - 08.5C +00,0C +00,0C +50 to +300 +345 - 10,0C - 12.5C +00,0C +00,0C +20 to +400 1000 +460 - 15,0C - 19,0C +00,0C +00,0C 2000 +550 +20 to +500 - 19,0C - 24,0C 4000 +550 1 The switching point accuracy can be shifted to another part of the scale, to special order. Capillary and temperature probe Type ATH-EXx-.. End of scale up to 200C up to 300C up to 500C up to 300C Capillary length Min. bending radius of capillary Electrical data Switching device TW, STW microswitch in flameproof enclosure with changeover contact
Temperature probe copper (Cu), Mat. Ref. 2.0090 brazed, electro-tinned st. steel (CrNi), Mat. Ref. 1.4571 brazed st. steel (CrNi), Mat. Ref. 1.4571 st. steel (CrNi), Mat. Ref. 1.4571 welded st. steel (CrNi), Mat. Ref. 1.4571 st. steel (CrNi), Mat. Ref. 1.4571 welded 1000 mm is standard, max. 5000 mm 5 mm
Capillary 1.5mm dia. copper (Cu), Mat. Ref. 2.0090 electro-tinned copper (Cu), Mat. Ref. 2.0090 electro-tinned
TB, STB microswitch in flameproof enclosure with (n.c.) break contact and lock-out and additional signal contact terminals 1-4: (n.c. break) terminals 1-4: (n.c. break) AC-1: 10 A, 230 V +10% AC-1: 16 A, 230 V +10% AC-15: 2 A, 230 V +10% AC-15: 2 A, 230 V +10% DC-1: 0.25A, 230 V +10% DC-1: 0.25A, 230 V +10% terminals 1-2: (n.o. make) terminals 1-2: (n.o. make) AC-1: 5 A, 230 V +10% AC-1: 10 A, 230 V +10% AC-15: 0.8 A, 230 V +10% AC-15: 1.5 A, 230 V +10% DC-1: 0.25A, 230 V +10% DC-1: 0.25A, 230 V +10% 5-pole terminal strip, suitable for conductor cross-sections up to 2.5 mm2
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Technical data
Operating data Switching differential in % of control / limit range Ranges with end of scale 350C Ranges with end of scale > 350C Switching action Nominal value Possible actual Switching action Nominal value Possible actual value value TW 3 3-5 TW 5 5-9 STW 5 5-7 STW 6 6-11 A deviation of the ambient temperature at the housing from the calibrated ambient temperature 22C will result in a shift of the switching point: higher ambient temperature = lower switching point lower ambient temperature = higher switching point Surface-mounting thermostats with end of scale < 200C 200C 350C > 350C 500C TW / TB STB/STW TW / TB STB/STW TW / TB STB/STW effect due to switch head 0.08%/C 0.17%/C 0.06%/C 0.13%/C 0.14%/C 0.12%/C effect due to capillary (per meter) 0.047%/C 0.054%/C 0.09%/C 0.11%/C 0.04%/C 0.03%/C -50 to +50C Temperature class T6 max. T5 max. min. Capillary +40C +55C < 200C -40C 200C 350C -20C > 350C 500C -40C to DIN 16257, NL 0 NL 90 (other NL on request) for end of scale Switch head +40C +55C -20C -20C -20C
storage
polyester housing, glass-fiber reinforced, black ATH-EXx-2 ATH-EXx-7 ATH-EXx-20 ATH-EXx-70 ATH-EXx-7-F ATH-EXx-70-F Limit adjustable at setpoint spindle, after removing housing cover. Limit adjustable at setpoint spindle, after removing housing cover. Afterwards, the setpoint spindle must be sealed by the installer in order to protect the limit that has been set. The limit setting is fixed at the factory and sealed. IP65 to EN 60 529 Ex cable gland M 20 x 1.5, for cable diameters from 6 to 12 mm approx. 1.2 kg by 4 screws after removing housing cover
Enclosure protection Cable entry Weight Switch head fixing Process connection1
plain cylindrical probe A (standard) pocket U (on request) screw-in pocket with screw-in spigot G 1/2 Form A to DIN 3852/2 and clamping clip with fixing screw for securing the probe Material of up to +150C: CuZn, nickel-plated is standard; above +150C: St is standard pocket U (CrNi on request) Fitting length S standard lengths: 100, 120, 150, 200 or 300 mm (other lengths on request) Immersion tube dia. D = 8 mm 1 For other process connections and pockets, see data sheet 60.6710 (only US, UO, Q and V).
Note: Physical and toxicological properties of the expansion fluid that may escape in the event of a system fracture. Control range with end of scale Dangerous reactions no no no Fire and explosion hazard Ignition Explosion limit temperature + 355C 0.6 8 % v/v + 490C -no no Water contamination yes yes no irritant yes yes no Toxicological data danger to health
1 1
toxic no no no
no
12.05/00337574
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Connection diagrams
ATH-EXx-..
1 4 PE
ATH-EXx-20 ATH-EXx-20
1 2 4 L1 N PE
ATH-EXx-70 ATH-EXx-70
2 2 L1 N
Dimensions
ATH-EXx-.. Standard version with capillary
( 1 ) Ex cable gland, M 20 x 1.5 x 6 -12 ( 2 ) Ex gland Other process connections and pockets as per data sheet 60.6710 (only U, US, UO, Q and V). ATH-EXx-2 with coiled probe H (only for control ranges -20 to +40C, -20 to +50C and 0 to +50C)
12.05/00337574
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Order details
Surface-mounting thermostat, ATH-EXx Series Order code 605051 02 20 07 70 (3) 013 014 021 025 056 062 080 064 045 046 (4) 1000 2000 3000 4000 5000 .... (5) 40 20 (6) 10 15 20 (7) 00 13 00 46 01 20 000 100 120 150 200 300 400 00 8 6 000 520 (1) (2) Basic type Surface-mounting thermostat for areas with an explosion hazard, ATH-EXx Series Basic type extensions ATH-EXx-2 Temperature monitor TW ATH-EXx-20 Fail-safe temperature monitor STW ATH-EXx-7 Temperature limiter TB ATH-EXx-70 Fail-safe protection temperature limiter STB Control/limit ranges C -20 to +040 -20 to +050 +00 to +050 +00 to +100 +40 to +120 +50 to +200 +80 to +250 +50 to +300 +20 to +400 +20 to +500 Capillary length 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length, details in plain text Material of capillary Cu copper, electro-tinned (only up to +300C) CrNi stainless steel 1.4571 Process connection (PA) A = plain cylindrical probe (standard) H = coiled probe U = screw-in pocket Thread for process connection no thread (process connection 10) external thread G 1/2 (8) Material of process connection only with process connection A CuZn (brass) St (steel) CrNi (stainless steel 1.4571) (9) Fitting length S (immersion tube length) ATH-EXx without pocket 100mm 120mm 150mm 200mm 300mm 400mm (10) Diameter D (immersion tube dia.) ATH-EXx without pocket 8 mm (11) Diameter d (probe diameter) 6 mm (12) Extra codes1 none F Limit is fixed at the factory and sealed (only with TB + STB). (1) 605051 605051 (2) / / 70 (3) 062 (4) 2000 (5) 20 (6) 10 (7) 00 (8) 00 (9) 000 (10) 00 (11) 6 (12) / , . . .1 1 / 000 (only for -20 to +40C, -20 to +50C, 0 to +50C)
12.05/00337574
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
Types
Typen TE-1wO TE-1wS TE-1tO TE-1tS for connection to Pt100 resistance thermometer as standard: 2-wire circuit Switching action break action (SPST-NC) (standard) relay de-energized at x w make action (SPST-NO) relay energized at x > w break action (SPST-NC) (standard) relay de-energized at x w make action (SPST-NO) relay energized at x > w
Thermocouple NiCr-Ni K
Extra codes
b3 ka sw
front-panel mounting by means of 2 screws terminal cover, IP40 protection dust-tight and water-jet proof housing, polycarbonate, IP65 protection
Technical data
Electrical data Supply voltage 230 V AC +10/-15%, 48 63 Hz 115 V AC +10/-15%, 48 63 Hz 24 V DC +10/-15% other voltages on request 10 A, 250 V AC resistive load, 300000 operations at rated load 10 A, 24 V DC max. 3 VA relay with floating changeover contact; for 3-wire circuit: only 1 break (SPST-NC) or 1 make (SPST-NO) to EN 61326 interference emission: Class B, interference immunity: to industrial requirements via screw terminals, max. conductor cross-section: 4 mm2 for 24 V DC supply: to EN 60730-1 overvoltage category III SELV and PELV operation pollution degree 2 creepage distance equals air gaps: mains supply to electronics and probe 6 mm mains supply to relay 3 mm relay to electronics and probe 6 mm as standard:
Contact rating Power drawn Controller output Electromagnetic compatibility Electrical connection Electrical safety
08.06/00085801
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Control range C Relay is de-energized at a probe temperature below: -085C -50 to +030 -045C -20 to +040 -025C -00 to +050 -040C -00 to +100 -065C -00 to +150 -085C -00 to +200 -130C -00 to +300 -165C -00 to +400 -225C -00 to +500 When using a 2-wire temperature probe with a probe cable that is different from the standard types ( lead resistance RL = 165 m ), there will be an error of about 1C per 0.39 change in lead resistance. This means that, if the probe cable is extended using a 2-core copper cable, the following error will occur: Core cross-section Temperature change per meter of cable 0.50 mm2 0.18 C/m 0.75 mm2 0.12 C/m 2 1.00 mm 0.09 C/m 2 0.06 C/m 1.50 mm In the case of a 3-wire circuit, the probe cable length is internally compensated. The resistance probe and the probe cable are monitored for break and short-circuit. In the event of a fault, the relay switches to the de-energized state.
Measurement input: NiCr-Ni thermocouple Control ranges Control range C +200 to +0600 +400 to +0800 +600 to +1000 +800 to +1200 The thermocouple and compensating cable are monitored for break. provided as standard
Measuring circuit monitoring Temperature compensation Operating data Switching point accuracy Switching differential Zero-point correction Permissible ambient temperature Permissible storage temperature Ambient temperature error Climatic conditions Housing Enclosure protection to EN 60529
2% of control range span adjustable from 0.25 to 5%, factory-set to minimum value enables the optimum matching of the switching point and probe accuracy to the respective working point or range in operation -10 to +50C -40 to +75C < 0.5% per 10 C relative humidity 75% annual mean, no condensation
standard: IP20 with extra code ka: IP40 with extra code sw: IP65 plastic housing, polycarbonate; color: light gray, RAL 7035 The yellow LED on the front indicates that the relay is energized. standard: on rail to EN 60715, 35 x 7.5 mm unrestricted approx. 200 gm
08.06/00085801
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Block diagram
( 10 ) Pt100 (2) Pt100 (1)
-
(3)
+ -
(5)
(7)
(8)
( 11 )
( 12 )
NiCr-Ni
(4)
(6)
(9)
+ -
( 13 )
Operation
The sensor signal of the temperature probe ( 1 ) is linearized and amplified at the input stage ( 2 ) and reaches the comparator ( 3 ) as process value x. The comparator forms the difference between the process value x and the setpoint w that was set on the setpoint knob ( 4 ), resulting in the control deviation xw = x w. The contact action O or S is determined internally, through links ( 5 ). The difference signal produced during a control deviation acts through the integrated amplifier ( 7 ) on the subsequent trigger stage ( 8 ). The switching differential xsd of the trigger stage is adjusted by means of the potentiometer ( 9 ). The trigger output signal uses the transistor ( 11 ) to operate the relay, which has a floating changeover contact ( 12 ). In the case of type TE-1w in 3-wire circuit, only one make or one break contact is available. The relay energized status is indicated by the LED ( 10 ). The measurement circuit monitor ( 6 ), which comes as standard, checks the probe and the probe cable for break or short-circuit. The voltage required to operate the modules is generated and stabilized in the power supply ( 13 ).
Electrical connection
Type TE-1 as standard
11 12 41
Connection for Relay output (41 not applicable with 3-wire circuit)
Typ
Control status Terminals 41 break (SPST-NC) 42 common 43 make (SPST-NO) Code L1 line N neutral
TE 40 50 60 30 20 10 0 C 70 80 90 100
TE 40 50 60 30 20 10 0 C 70 80 90 100
Supply
43 42
43
42
(L+) (L-)
(L+) (L-)
Resistance thermometer in 2-wire circuit Thermocouple (NiCr-Ni) Resistance thermometer in 3-wire circuit (Pt100)
08.06/00085801
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Dimensions
Type TE-1 is standard
35 27 71.5
TE 40 50 60 C 70 80 90 100
70
60
20 10 0
45
30
36
L1
43
42
TE 40 50 60 C 70 80 90 100
95.5
39
30 20 10 0
36
6.8
39.5
31
L1
43
42
22
78.5
18
see Data Sheet 60.5521; see sectional catalog 90 Transducers for additional temperature probes and styles
15.2
15.2 6.8
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Control range C 50+30 20+40 0+50 0+100 0+150 0+200 0+300 0+400 0+500 +200+600 +400+800 +600+1000 +800+1200
Non-stock items:
Order code 605501 11 12 21 22 31 32 (3) 011 013 021 025 027 028 030 031 032 086 087 088 089 (4) 02 05 29 (5) 706 717 718 (1) (2) Basic type TE-1 Basic type extension TE-1 wO with break action TE-1 wS with make action TE-1 wO with break action TE-1 wS with make action TE-1 tO with break action TE-1 tS with make action Control ranges 0 -50 to 0030C 0 -20 to 0040C 0+00 to 0050C 0+00 to 0100C 0+00 to 0150C 0+00 to 0200C 0+00 to 0300C 0+00 to 0400C 0+00 to 0500C +200 to 0600 C +400 to 0800 C +600 to 1000 C +800 to 1200 C Supply 230 V AC +10/-15%, 4863 Hz 115 V AC +10/-15%, 4863 Hz 024 V DC +10/-15% Extra codes b3 front-panel mounting by 2 screws M3 ka terminal cover, IP40 protection sw dust-tight and waterjet-proof housing, IP65 protection for Pt100 in 2-wire circuit for Pt100 in 2-wire circuit for Pt100 in 3-wire circuit for Pt100 in 3-wire circuit for thermocouples NiCr-Ni for thermocouples NiCr-Ni standard standard
(2) .. 11
(4) .. 02
/ /
(5) ... 706 TE-1 wO with break action, for Pt100 in 2-wire circuit control range 0 to +100C 230 V AC +10/-15%, 48 63 Hz front-panel mounting by 2 screws M3
08.06/00085801
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/1
Resistance Thermometer
with Pt100 resistance sensor 2DIN IEC Class B
for temperatures from -50 to +400C high measurement accuracy and long-term stability short response time, 50% time in water approx. 5sec, in air approx. 60sec
General application
Resistance thermometers are used for direct temperature measurement, for instance in airconditioning and refrigeration, in heating systems, ovens and in equipment engineering. Thanks to standardized reference values, resistance thermometers can be interchanged without the need for recalibrating indicators, controllers or recorders. The resistance values and their permissible tolerances are specified in standard tables.
Principle of operation
The resistance thermometer is based on the principle of measuring the change in resistance of metal wires with temperature. The resistance sensors are made from platinum wire, and its resistance is an indication of the particular temperature. In accordance with IEC 751, the resistance of a Pt100 at 0C is 100 . At higher temperatures, the resistance is correspondingly higher, and at lower temperatures it is smaller.
Type TW-01/02/03
Type TW-04
For other resistance thermometers to DIN specification and in special versions (also for temperatures up to +500C), see the Sectional Catalog Transducers. Protection tube in brass, steel or CrNi as push-in pocket U G1/2 , length 100 300mm as per Data Sheet 60.6710.
11.03 / 00303800
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/7
~15
Order code:
Cu (copper)
A
5 6 7 8 other probe diameters on request
606710-10
40
20
10
coiled bulb H
Cu (copper)
U
17 35 up to +200C max. probe temperature
L1
d D
Order code:
~10
40 2 .. 20
17 3 . 8
35
04.04/00073261
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/7
Screw fittings
Order code: Outline drawing 1 Designation 2 Thread G 3 Material of connection 4 Immersion tube length S in mm 5 Probe dia. d in mm 6 Material of probe
hex SW
Order code:
~15
screw fitting B probe mounting C with loose nipple, threaded at both ends
CuZn (brass)
L1
L1=14 27 a/f
L1=12 22 a/f
L1=16 32 a/f
606710-50
13
12
14
46
01
20
...
40
St (steel)
G 1/ 2
G 3/8
G 3/ 4
20
CuZn (brass)
hex SW
L1
G
S
screw fitting C plain cylindrical bulb with shoulder and union nut. Shoulder brazed or welded to capillary.
St (steel)
G 1/ 2 L1=10 27 a/f
G 3/ 4 L1=11 32 a/f
~15
Order code:
606710-52
13
12
14
46
01
20
...
20
hex SW screw fitting D plain cylindrical bulb, threaded connector brazed or welded to capillary. CuZn (brass) St (steel) G /2 L1=14 27 a/f
1
G /8 L1=12 22 a/f
G
S
~15
Order code:
606710-54
13
12
46
01
20
...
20
Process connection B, C and D: max. permissible pressure with instrument function STB, STW (STB) = 2 bar / TR, TW and TB on request. 1 606710-. . 606710-50 2 .. 13 3 .. 20 4 ... 200 5 . 6
04.04/00073261
L1
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/7
Screw fittings
Order code: Outline drawing washer Scheibe Dichtung seal Scheibe washer hex SW
L1
1 Designation
2 Thread
3 Material
Notes
screw fitting Q thread at both ends, for retrofitting on capillary. Max. probe temperature +200C.
CuZn (brass)
Only suitable for probe dia. d up to 8 mm. For use in unpressurized media only.
606710-60
13
12
46
20
screw fitting V sealing gland for retrofitting on capillary. Max. probe temperature +200C.
CuZn (brass)
M 14 x 1 19 a/f
Only suitable for probe dia. d up to 6 mm. For use in unpressurized media only.
Order code:
606710-65
35
46
20
1 606710-. . 606710-60
2 .. 13
3 .. 20
04.04/00073261
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/7
Pockets
Order code: Outline drawing
SW hex
1 Designation
2 Thread G
3 Material
screw-in pocket U with screw-in spigot, Form A to DIN 3852/2 with fixing screw
CuZn (brass)
L1=14 27 a/f
L1=12 24 a/f
Order code:
SW hex
606710-20 screw-in pocket UO open at end, with screw-in spigot, Form A to DIN 3852/2 with fixing screw (clip for securing bulb supplied with code f) 606710-21
13
12
46
01
St (steel)
G 1/ 2
G 3/ 8
L1
20
...
10
15
CuZn (brass)
G D
L1=14 27 a/f
L1=12 24 a/f
Order code:
25
13
12
46
01
St (steel)
G 1/ 2
G 3/ 8
L1
20
...
27
no thread
Order code:
25
606710-22
00
01
St (steel)
30
20
...
10
15
12
no thread
St (steel)
30
27
00 2 .. 13 -
01 3 .. 01
20 -
8 5 .. 10
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/7
Pockets
Order code: Outline drawing
SW hex
1 Designation
2 Thread G
3 Material
L1
screw-in pocket UH with fixing screw, no sealing shoulder, for sealing with hemp
L1=14 24 a/f
CuZn (brass)
G 1/ 2
120
15 mm
Order code:
606710-24
13
46
120
15
~85
90 SW hex
screw-in pocket UZ with fixing screw and extension, for thermostat with rigid stem and probe temperature above +150C
L1=14 27 a/f
L1=12 24 a/f
Order code:
606710-30
13
12
01
St (steel)
G /2
G /8
L1
20
...
10
15
~85
90
St (steel)
hex SW
G D
screw-in pocket UZO open at end, with fixing screw and extension, for thermostat with rigid stem and probe temperature above +150C
G /2 L1=14 27 a/f
G /8 L1=12 24 a/f
L1
Order code:
606710-31
13
12
01
20
...
~91
90
30
weld-in pocket UZS with fixing screw and extension, for thermostat with rigid stem and probe temperature above +150C
no thread
Order code:
00 2 .. 13
01 3 .. 20
St (steel)
20
10 5 .. 8
15
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/7
Pockets
Order code: Outline drawing 1 Designation 2 Thread G 3 Material 4 Immersion tube length S in mm 5 Immersion tube dia. D in mm
CuZn (brass)
L1=14 27 a/f
L1=12 22 a/f
Order code:
606710-40
13
12
46
01
St (steel)
G /2
G /8
hex SW
screw-in pocket E with screw-in spigot*, Form A to DIN 3852/2, pocket secured with union nut, probe mounting C. (52)
L1
20
...
10
15
hex SW
D2
weld-in pocket ES for thermostats with capillary, with welding shoulder. Pocket secured with union nut, probe mounting C. (52)
no thread
Order code:
606710-41
00
01
St (steel)
20
...
10
15
hex SW
D2
12
S
weld-in pocket ES immersion tube tapered from 12 to 8 mm, for thermostats with capillary, with welding shoulder. Pocket secured with union nut, probe mounting C. (52) 606710-42
no thread
St (steel)
Order code:
00
01
20
...
~115
90
hex SW
D2
weld-in pocket EZS with thread G3/4 on instrument side and extension, for thermostats with rigid stem and probe temperature above +150C
no thread
D
EZS
Order code:
00 3 .. 01
01
St (steel)
20 4 ... 300
... 5 .. 8
10
15
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/7
Permissible loading on the pocket Pockets U, US, UZ, UZS, E, ES and EZS
The values below refer to the maximum loading on the corresponding probe mounting. The maximum pressure that can be sealed depends on the mounting conditions and may be lower.
Steel pocket
Material Tube St 35.8 I Screw-in nipple up to 300C 9 SMnPb28 K Screw-in nipple up to 450C 16 Mo 3 (turned groove) Weld-in nipple 16 Mo 3 (no turned groove)
Loading
Temperature 8 x 0.75 mm or taper 100C 150C 200C 300C 350C 400C 450C 89 bar 83 bar 78 bar 59 bar 50 bar 46 bar 24 bar Nipple
Tube diameter D 10 x 0.75 mm Maximum permissible pressure 72 bar 67 bar 63 bar 47 bar 40 bar 37 bar 19 bar
Tube
Max. permissible operating temperature* static load no load 9 SMnPb28 K +300C St 35.8 I +530C 16 Mo 3 +450C * Please observe the maximum permissible probe temperature for the corresponding thermostat version. * At operating temperatures above +420C: operating time with static load is limited to 200,000 hrs. TRD 508 must be observed. * Pockets UO and UZO: for use in unpressurized media only.
no load +530C
* Please observe the maximum permissible probe temperature for the corresponding thermostat version.
Brass pocket
Material Loading Temperature 8 x 0.75 mm 100C 150C Max. permissible operating temperature* Pocket UH* 50 bar 48 bar Tube and nipple: brass (CuZn) Tube diameter D 10 x 0.75 mm Maximum permissible pressure 40 bar 39 bar +150C * Please observe the maximum permissible probe temperature for the corresponding thermostat version. Temperature Maximum permissible pressure 110C 16 bar * Please observe the maximum permissible probe temperature for the corresponding thermostat version. 15 x 0.75 mm 27 bar 26 bar
04.04/00073261
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
02
12
01 Spindle-fitting knobs for pushing onto 6 mm dia. shafts, with 4.6 mm flat Part no. Max. dia. Height Index radius Panel hole Operating temperature Material 60 701 205 30.0 mm 19.0 mm 17.5 mm 14.0 mm +120 C thermoplastic, slate grey RAL 7015
18 Fixing screws M3 x 8 DIN 84 Part no. Material 60 037 100 nickel-plated brass
Part no. Outer dia. Height Fixing Spacing Marking Operating temperature Material Dial divisions 50.0 mm 4.8 mm with two M3 screws 22.0 mm iron-grey RAL 7011 +120 C thermoplastic, flint grey RAL 7032 over 250 angle Limiting Adjustment
60 701 203 to limit the scale max. endpoint, right stop 125 to 250 angle
02 Part no. 61 079 200 As above, but with adjustable pointer relative to spindle flat Cap, light grey, RAL 7035
12 Stop for knob 01 only Part no. 60 701 202 Limiting to limit the scale min. starting point, left stop Adjustment 0 to 125 angle
08.06/00073264
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
07
23
15
18
08
16
19
07 Spindle-fitting knobs for pushing onto 6 mm dia. shafts, with 4.6 mm flat (see Data Sheet 60.2021 for standard ranges) Max. dia. Height Panel hole Operating temperature Material Marking 41.0 mm 18.0 mm 16.0 mm +80 C thermoplastic, slate grey RAL 7015 white
23 Surround
15 Stop
18 Fixing screws
Part no. Max. dia. Max. height Fixing spacing Fixing for
63 205 002 to limit the max. and min. of the scale starting point or end point Adjustment 125 or +125 angle Fixing spacing 22 mm
19 Fixing screws Part no. 00 000 128 M4 x 8 DIN 84 for spacing 28 mm Material brass tenned
08 Knob Part no. 64 336 008 As above, but with pointer as index
16 Stop Part no. 63 205 001 As above, but with fixing spacing 28 mm
Standard setpoint adjusters for panel-mounting thermostats EMf-1 Type W1 Type W8 Type W8 (heatTHERM)
consisting of knob 01 adjustable stop 11 setpoint dial 21 2 screws 18 consisting of knob 07 surround 23 adjustable stop 15 2 screws 18 consisting of knob 07 surround 23 adjustable stop 16 2 screws M4 x 8
08.06/00073264
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Contents:
Series Dial thermometers with bimetal measuring system
Standard version Industrial version Chemical plant version Transformer version 1.5 1 1 1.5
Dial thermometers
Class Protection No.
IP52 or IP65
60.8301
IP 65
60.8425
Timers
with mechanical drive or synchronous motor 60.8901
02.08/00403738
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
Brief description
Standard version dial thermometers are instruments for universal use in on-site temperature measurement.
Type 608001/1810
Technical data
Housing Protection Window Scale Indication Response time Ambient temperature effect Limit temperatures Nominal position Basic type extensions 0150, 0163, 0180, 0110, 1863, 1880, 1810 0116, 1816 housing and bezel in zinc-plated steel housing and bezel in stainless steel (1.4301) angle block in aluminium (style 18) IP51 to DIN 60 529 glass, with extra code 432 in plexiglass (PMMA) blank aluminium, black lettering linear, Class 1.5 similar to EN 13190 t0.9 response approx 30 sec (measured in agitated water with a 10 mm dia. brass probe) no effect -30 to +80C (storage and transport -30 to +80C) unrestricted
01.06/00073267
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Dimensions
Types: 608001/0150 608001/0163 608001/0180 608001/0110 608001/0116
Extra codes
430
432 Type 608001/0150 608001/0163 608001/1863 608001/0180 608001/1880 608001/0110 608001/1810 608001/0116 608001/1816 D 50 63 80 100 160 H 13 14 13 18 19 L14 --26 -51 -51 -81
01.06/00073267
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Order details
Dial thermometer, standard version, Type 608001
Order code 608001 (1) Basic type Mechanical dial thermometer, standard version, Class 1.5 Basic type extensions Style 01; housing size: 050 mm dia. Style 01; housing size: 063 mm dia. Style 01; housing size: 080 mm dia. Style 01; housing size: 100 mm dia. Style 01; housing size: 160 mm dia. Style 18; housing size: 063 mm dia. Style 18; housing size: 080 mm dia. Style 18; housing size: 100 mm dia. Style 18; housing size: 160 mm dia. (3) 628 632 635 639 643 564 566 570 585 469 472 357 807 810 814 818 826 832 834 840 843 848 854 (4) 010 844 845 841 847 018 Indication range (AB) -20 to +040C; measuring range -10 to +030C, accuracy 1.5C -20 to +060C; measuring range -10 to +060C, accuracy 1.5C -20 to +080C; measuring range -10 to +070C, accuracy 1.5C -20 to +100C; measuring range -00 to +080C, accuracy 3.0C -20 to +120C; measuring range -00 to +100C, accuracy 3.0C -30 to +030C; measuring range -20 to +020C, accuracy 1.5C -30 to +050C; measuring range -20 to +040C, accuracy 1.5C -30 to +070C; measuring range -20 to +060C, accuracy 1.5C -30 to +170C; measuring range -10 to +150C, accuracy 3.0C -40 to +040C; measuring range -30 to +030C, accuracy 1.5C -40 to +060C; measuring range -30 to +050C, accuracy 1.5C -50 to +050C; measuring range -40 to +040C, accuracy 1.5C -00 to +060C; measuring range +10 to +050C, accuracy 1.5C -00 to +080C; measuring range +10 to +070C, accuracy 1.5C -00 to +100C; measuring range +10 to +090C, accuracy 1.5C -00 to +120C; measuring range +20 to +100C, accuracy 3.0C -00 to +160C; measuring range +20 to +140C, accuracy 3.0C -00 to +200C; measuring range +20 to +180C, accuracy 3.0C -00 to +250C; measuring range +30 to +220C, accuracy 4.0C -00 to +300C; measuring range +30 to +270C, accuracy 8.0C -00 to +350C; measuring range +50 to +300C, accuracy 8.0C -00 to +400C; measuring range +50 to +350C, accuracy 8.0C -00 to +500C; measuring range +50 to +450C, accuracy 8.0C Process connection (PA) TA 01; immersion tube with shoulder TA 02; immersion tube with union nut and loose nipple2) TA 03; immersion tube with loose union nut TA 04; immersion tube with fixed hexagon2) TA 06; immersion tube with sliding clamp fitting (20 bar max.)2) TA 08; immersion tube with sliding fixing plate TA 08; in zinc-plated steel and fixing screw SH04; screw-in pocket, one-piece SH05; screw-in pocket, assembled SH07; screw-in pocket, assembled, with fixing screw SH09; weld-in pocket, assembled, with fixing screw
(2) 0150 0163 0180 0110 0116 1863 1880 1810 1816
01.06/00073267
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
Order details
Dial thermometer, standard version, Type 608001
Order code 06 10 12 14 17 (5) Diameter of process connection (PA)1) 06 mm dia. 10 mm dia. 12 mm dia. (with SH05, SH07 only) 14 mm dia. (with SH05, SH07, SH09 only) 17 mm dia. (with SH04 only) Thread for process connection (PA)1) no thread (TA01 only) G3/8 thread G1/2 thread G3/4 thread 1/2-14NPT thread Material of probe1) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) (up to 200C) Material of process connection (PA)1) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA) (dimension S) 050 mm 100 mm 150 mm 200 mm special length (details in plain text, in 50 mm steps) Extra codes (TZ) no extra code peak-reading pointer (only with basic type extension 0163, 0180, 0110, 1863, 1880, 1810, indication range span: 100 C min.) marker (plexiglass window, only with basic type extension 0163, 0180, 0110, 1863, 1880, 1810, +70C max. ambient temperature) customized scale Special versions on request!
(6) 000 103 104 105 144 (7) 01 26 46 (8) 01 26 46 (9) 050 100 150 200 ... (10) 000 430 432 522
(2) ....
(3) ...
(4) ...
(5) ..
(6) ...
(7) ..
(8) ..
(9) ...
...
0180
818
845
10
104
96
46
100
...
See Data Sheet 60.8730 for description and features. Screw-in spigot to DIN 3852 Form A (not with NPT thread). List extra codes in sequence, separated by commas.
01.06/00073267
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
Dial thermometers, industrial version, are instruments for universal use in local temperature measurement.
Type 608002/1810
Technical data
Housing Protection Window Scale Accuracy class Time constant Ambient temperature effect Limit temperatures Nominal position housing and bezel in stainless steel (1.4301) angle block in aluminium (Style 18) IP54 to EN 60 529 (IP65 with extra code 404) glass, with extra code 404: plexiglass (PMMA) blank aluminium, black lettering Class 1 to EN 13190 t0.632 response approx. 20 sec (measured in agitated water with a 10 mm dia. stainless steel probe) no effect -30 to +80C (with extra code 404: -20 to +70C) storage and transport: -30 to +80C (with extra code 404: -20 to +70C) unrestricted
01.06/00073270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Dimensions
Type: 608002/0150
Type:
608002/0116
01.06/00073270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Dimensions
Types: 608002/1860 608002/1880 608002/1810
Type:
608002/1816
L14 26 51 51 81
Extra codes
430
434
01.06/00073270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Order details
Order code 608002 (2) 0150 0160 0180 0110 0116 1860 1880 1810 1816 (3) 628 632 635 639 643 564 566 570 585 469 472 357 807 810 814 818 826 832 834 840 843 848 854 (1) Basic type Mechanical dial thermometer, industrial version, Class 1 Basic type extension Style 01; housing size: 050 mm dia. Style 01; housing size: 060 mm dia. Style 01; housing size: 080 mm dia. Style 01; housing size: 100 mm dia. Style 01; housing size: 160 mm dia. Style 18; housing size: 060 mm dia. Style 18; housing size: 080 mm dia. Style 18; housing size: 100 mm dia. Style 18; housing size: 160 mm dia. Indication range (AB) -20 to +040C; measuring range -10 to +030C, accuracy 1.0C -20 to +060C; measuring range -10 to +060C, accuracy 1.0C -20 to +080C; measuring range -10 to +070C, accuracy 1.0C -20 to +100C; measuring range -00 to +080C, accuracy 2.0C -20 to +120C; measuring range -00 to +100C, accuracy 2.0C -30 to +030C; measuring range -20 to +020C, accuracy 1.0C -30 to +050C; measuring range -20 to +040C, accuracy 1.0C -30 to +070C; measuring range -20 to +060C, accuracy 1.0C -30 to +170C; measuring range -10 to +150C, accuracy 2.0C -40 to +040C; measuring range -30 to +030C, accuracy 1.0C -40 to +060C; measuring range -30 to +050C, accuracy 1.0C -50 to +050C; measuring range -40 to +040C, accuracy 1.0C -00 to +060C; measuring range +10 to +050C, accuracy 1.0C -00 to +080C; measuring range +10 to +070C, accuracy 1.0C -00 to +100C; measuring range +10 to +090C, accuracy 1.0C -00 to +120C; measuring range +20 to +100C, accuracy 2.0C -00 to +160C; measuring range +20 to +140C, accuracy 2.0C -00 to +200C; measuring range +20 to +180C, accuracy 2.0C -00 to +250C; measuring range +30 to +220C, accuracy 2.5C -00 to +300C; measuring range +30 to +270C, accuracy 5.0C -00 to +350C; measuring range +50 to +300C, accuracy 5.0C -00 to +400C; measuring range +50 to +350C, accuracy 5.0C -00 to +500C; measuring range +50 to +450C, accuracy 5.0C
01.06/00073270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Order details
Order code 010 844 845 846 847 018 858 891 913 820 (5) 06 10 12 14 17 (6) 000 102 103 104 105 144 (7) 26 (8) 26 (9) 050 100 150 200 ... 000 430 404 522 434 (4) Process connection (PA)1 TA 01; immersion tube with shoulder TA 02; immersion tube with union nut and loose nipple2, 4 TA 03; immersion tube with loose union nut4 TA 04; immersion tube with fixed hexagon 2 TA 06; immersion tube with sliding clamp fitting (20 bar max.)2, 4 TA 08; immersion tube with sliding fixing plate TA 08;(zinc-plated steel) and fixing screw4 SH04; screw-in pocket, solid, to DIN 16 179 4 SH05; screw-in pocket, assembled2, 4 SH07; screw-in pocket, assembled, with fixing screw2, 4 SH09; weld-in pocket, assembled, with fixing screw 4 Diameter of process connection (PA)1 06 mm 10 mm 4 12 mm (with SH05, SH07 only) 14 mm (with SH05, SH07, SH09 only) 17 mm (with SH04 only) Type of thread for process connection (PA)1 no thread (TA01, TA08, SH09 only) thread G1/4 (only with basic type extension 0150) thread G3/8 4 thread G1/2 4 thread G3/4 4 thread 1/2-14NPT Material of probe1 stainless steel (CrNi, 1.4571) Material of process connection (PA)1 stainless steel (CrNi, 1.4571) Fitting length of process connection (PA) ( dimension S) 050 mm 100 mm 150 mm 200 mm special length (details in plain text, in 50 mm steps)
(10) Extra code (TZ)3 no extra code peak-reading pointer (only with basic type extension 0160, 0180, 0110, 1860, 1880, 1810 min. indication range span: 100 C; not with TZ 404) IP65 protection to EN 60 529 (only with basic type extension 0160, 0110, 1860, 1810; not with TZ 430, TZ 434) scale to customer specification peak-reading pointer, adjustable with screwdriver, protected by cap (only with basic type extension 0160, 0180, 0110, 1860, 1880, 1810; not with TZ 404) Special versions on request!
(5) .. 10
(7) .. 26
(8) .. 26
/ /
...
1 See Data Sheet 60.8730 for description and special features. 2 Screw-in spigot to DIN 3852 Form A (not with NPT thread). 3 List extra codes in sequence, separated by commas. 4 not with basic type extension 0150.
01.06/00073270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
Brief description
Chemical plant version dial thermometers are instruments for universal use in on-site temperature measurement.
Type 608003/1010
Technical data
Housing Protection Window Scale Indication Response time Ambient temperature effect Limit temperatures Nominal position Indication adjustment housing and bezel in stainless steel (1.4301) IP65 to EN 60 529 glass, with extra code 434 in plexiglass (PMMA) blank aluminium, black lettering linear, Class 1 to EN 13 190 t0.9 response approx. 30 sec (measured in agitated water with a 10 mm dia. probe in stainless steel) no effect -30 to +80C (storage and transport: -30 to +80C) unrestricted The bezel can be removed and the indication corrected on the pointer.
10.05/00073273
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Dimensions
Types: 608003/0180 608003/0110 608003/0116
Extra code 434 (peak-reading pointer) Type 608003/0180 608003/1080 608003/0110 608003/0110 TZ 474 608003/1010 608003/0116 608003/1016 159 161.5 099 101.5 D 079 D1 080 H 55 50 55 50 50 21 12.5 19 12.5 H1 15.5 H2 16.8
10.05/00073273
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Order details
Dial thermometer, chemical plant version, Type 608003
Order code 608003 0180 0110 0116 1080 1010 1016 (3) 628 632 635 639 643 564 566 570 585 469 472 357 807 810 814 818 826 832 834 840 843 848 854 (1) (2) Basic type Mechanical dial thermometer, chemical plant version, Class 1 Basic type extensions Style 01; housing size: 080 mm dia. Style 01; housing size: 100 mm dia. Style 01; housing size: 160 mm dia. Style 10; housing size: 080 mm dia. Style 10; housing size: 100 mm dia. Style 10; housing size: 160 mm dia. Indication range (AB) -20 to +040C; measuring range -10 to +030C, accuracy 1.0C -20 to +060C; measuring range -10 to +060C, accuracy 1.0C -20 to +080C; measuring range -10 to +070C, accuracy 1.0C -20 to +100C; measuring range -00 to +080C, accuracy 2.0C -20 to +120C; measuring range -00 to +100C, accuracy 2.0C -30 to +030C; measuring range -20 to +020C, accuracy 1.0C -30 to +050C; measuring range -20 to +040C, accuracy 1.0C -30 to +070C; measuring range -20 to +060C, accuracy 1.0C -30 to +170C; measuring range -10 to +150C, accuracy 2.0C -40 to +040C; measuring range -30 to +030C, accuracy 1.0C -40 to +060C; measuring range -30 to +050C, accuracy 1.0C -50 to +050C; measuring range -40 to +040C, accuracy 1.0C -00 to +060C; measuring range +10 to +050C, accuracy 1.0C -00 to +080C; measuring range +10 to +070C, accuracy 1.0C -00 to +100C; measuring range +10 to +090C, accuracy 1.0C -00 to +120C; measuring range +20 to +100C, accuracy 2.0C -00 to +160C; measuring range +20 to +140C, accuracy 2.0C -00 to +200C; measuring range +20 to +180C, accuracy 2.0C -00 to +250C; measuring range +30 to +220C, accuracy 2.5C -00 to +300C; measuring range +30 to +270C, accuracy 5.0C -00 to +350C; measuring range +50 to +300C, accuracy 5.0C -00 to +400C; measuring range +50 to +350C, accuracy 5.0C -00 to +500C; measuring range +50 to +450C, accuracy 5.0C
10.05/00073273
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
Order details
Dial thermometer, chemical plant version, Type 608003
Order code 010 843 845 846 847 018 (4) Process connection (PA) TA 01; immersion tube with shoulder TA 02; immersion tube with union nut and loose nipple2) TA 03; immersion tube with loose union nut TA 04; immersion tube with fixed hexagon2) TA 06; immersion tube with sliding clamp fitting (20 bar max.)2) TA 08; immersion tube with sliding fixing plate TA 08; in zinc-plated steel and fixing screw SH04; screw-in pocket, one-piece SH05; screw-in pocket, assembled SH07; screw-in pocket, assembled, with fixing screw SH09; weld-in pocket, assembled, with fixing screw (5) 06 10 12 14 17 (6) 000 103 104 105 144 (7) 26 (8) 050 100 150 200 ... (9) 000 522 434 474 Diameter of process connection (PA)1) 06 mm dia. 10 mm dia. 12 mm dia. (with SH05, SH07 only) 14 mm dia. (with SH05, SH07, SH09 only) 17 mm dia. (with SH04 only) Thread for process connection (PA)1) no thread (TA01 only) G3/8 thread G1/2 thread G3/4 thread 1/2-14NPT thread Material of process connection (PA)1) stainless steel (CrNi, 1.4571) Fitting length of process connection (PA) (dimension S) 050 mm 100 mm 150 mm 200 mm special length (details in plain text, in 50 mm steps) Extra codes (TZ) no extra code customized scale peak-reading pointer adjustable with screwdriver, protected through screw cap (plexiglass window; +70C max. ambient temperature) silicone-filled pointer damper (only with basic type extension 0180, 0110, 0116) Special versions on request!
(5) .. 10
(7) .. 26
/ /
...
See Data Sheet 60.8730 for description and features. Screw-in spigot to DIN 3852 Form A (not with NPT thread). List extra codes in sequence, separated by commas.
10.05/00073273
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/2
Brief description
Dial thermometers for transformers are universal instruments for local temperature measurement.
s ck item for sto 3! n: only Cautio - Pack of 3 a multiple of be t s u m red ty orde Quanti
Type 608005/1080
Technical data
Housing Enclosure protection Window Scale Accuracy class Time constant t0.632 Ambient temperature effect Limit temperatures Nominal position housing and bezel in stainless steel (1.4301) IP55 to EN 60 529 Plexiglas (PMMA) white, black lettering Class 1.5 similar to EN 13 190 approx. 20 sec (measured in agitated water with an 8 mm dia. stainless steel probe) no effect -30 to +80C (storage and transport -30 to +80C) NL 90, symbol
Dimensions
Type: 608005/1080
L1
14 16 16 75
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/2
Order details
Dial thermometer, transformer version, Type 608005
Order code 608005 (1) Basic type Mechanical dial thermometer, transformer version, Class 1.5, with peak-reading pointer (2) Basic type extension 1080 Style 10; housing size: 80 mm dia.
818 643
(3) Indication range (AB) -00 to +120C; measuring range +20 to +100C, accuracy 3.0C -20 to +120C; measuring range +00 to +100C, accuracy 3.0C (4) Process connection (PA) TA 24; immersion tube with screw connection, TA 24; O ring seal and clamping screw (5) Diameter of process connection (PA) 8 mm dia. (6) Type of thread for process connection (PA) G1/2 thread G3/4 thread G1 thread (7) Material of process connection (PA) stainless steel (1.4571) for temperature probe (TF) / brass for probe mounting (TA) (8) Fitting length of process connection (PA) (dimension S) 150 mm special length (on request, details in plain text) (9) Extra codes (TZ) no extra code customized scale peak-reading pointer adjustable with screwdriver; protected by cap Special versions on request!
874
97
150 ...
(2) ....
(3) ...
(4) ...
(5) ..
(6) ...
(7) ..
(8) ...
...
1080
818
874
106
50
150
...
List extra codes in sequence, separated by commas. Note: For contact dial thermometers for transformers, see data sheet 60.8540. For temperature indicators and contact dial thermometers with capillary, see data sheets 60.8201 and 60.8520. 07.07/00074773
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 1/7
Dial Thermometer
Temperature indicator for panel or surface mounting Class 1.5 IP65 protection max. Housing sizes: 60 mm dia., 80 mm dia. and 100 mm dia. Bezel: 72 x 72 mm and 96 x 96 mm
Brief description
Dial thermometers are temperature indicators for universal use. The instruments feature a stainless steel housing with a liquid-filled or gas-filled measuring system. The temperature-dependent change in volume of a liquid-filled measuring system (or the temperature-dependent change of pressure in a gas-filled system) is converted into a rotary movement of the pointer by a Bourdon tube, without any intermediate gearing. Type 608201/2160
Type 608201/2572
Technical data
Housing or bezel Protection Window Scale Accuracy class Indication adjustment Limit temperatures Nominal position liquid-filled indication range (AB) 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe stainless steel (1.4301) IP53 as per EN 60 529 (IP65 with extra code 404) glass, with styles 24 and 25, and with extra codes 473 and 404: PMMA (plexiglass) white, black lettering (silver, black lettering with extra codes 473 and 404) Class 1,5 to EN 13190 at the housing rear, no indication adjustment with extra codes 473 and 404 storage and transport -30 to +70C (for indication range -40 to +40C: up to 50C; -30 to +50C: up to 60C) unrestricted gas-filled indication range (AB) 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per meter)
in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range 0.05% of indication range per C change in ambient temperature per C change in ambient temperature 0.03% of indication range no effect per C change in ambient temperature at higher ambient temperature higher temperature indication
05.06/00073280
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 2/7
Dimensions
Types: 608201/1060 608201/1080 608201/1010
05.06/00073280
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 3/7
Dimensions
Types: 608201/2260 608201/2280 608201/2210
05.06/00073280
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 4/7
Dimensions
Type: 608201/2572
H1 7 8
H6 approx. 7.5
H7 19.5
H9 66 86 106
D 60 80 100
D1 65 85 106
D2 75 95 116
D3 85 110 132
D4 86 110 132
D5 66 86 107.5
a 3.6 4.8
L5 41.5*
All dimensions in mm * on probe mounting TA 02 L5 = 70.5 mm on probe mountings TA 22 and TA 31 L5 = 49.5 mm values in brackets apply to TZ 473 or TZ 404
05.06/00073280
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 5/7
Order details
Dial thermometer Class 1.5, Type 608201
Order code 608201 (1) Basic type Mechanical dial thermometer Class 1.5 Basic type extensions Style: 10; housing size: 60 mm dia. Style: 10; housing size: 80 mm dia. Style: 10; housing size: 100 mm dia. Style: 20; housing size: 60 mm dia. Style: 20; housing size: 80 mm dia. Style: 20; housing size: 100 mm dia. Style: 21; housing size: 60 mm dia. Style: 21; housing size: 80 mm dia. Style: 21; housing size: 100 mm dia. Style: 22; housing size: 60 mm dia. Style: 22; housing size: 80 mm dia. Style: 22; housing size: 100 mm dia. Style: 23; housing size: 60 mm dia. Style: 23; housing size: 80 mm dia. Style: 23; housing size: 100 mm dia. Style: 24; housing size: 96 x 96 mm
(2) 1060 1080 1010 2060 2080 2010 2160 2180 2110 2260 2280 2210 2360 2380 2310 2496
2572
(3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 848 851 854 858
Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 1.5C -30 to +050C; measuring range 020 to +040C, accuracy 1.5C -20 to +120C; measuring range 030 to +100C, accuracy 3.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 1.5C -00 to +080C; measuring range 0+10 to +070C, accuracy 1.5C -00 to +100C; measuring range 0+10 to +090C, accuracy 1.5C -00 to +120C; measuring range 0+20 to +100C, accuracy 3.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 3.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 3.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 4.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 3.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 6.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 4.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 6.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 6.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 6.0C -00 to +450C; measuring range 0+50 to +400C, accuracy 6.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 8.0C -00 to +600C; measuring range +100 to +500C, accuracy 10.0C
05.06/00073280
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 6/7
Order details
Dial thermometer Class 1.5, Type 608201
Order code (4) 00 02 11 17 21 (5) 0 1000 2000 3000 4000 5000 .... (6) 750 752 843 161 847 311 872 873 401 848 913 820 876 871 (7) 6 8 10 11 12 Capillary type (FL)1 none (with rigid connection) FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 none (with rigid connection) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: 1000 mm steps, maximum length 10000 mm) Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip TA 25; sliding clamp fitting on capillary2 SH 09; (with FL 17 and FL 21 only) SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; (with TF 01) SH 09; screw-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) (with TF 01) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia. 11 mm dia. 12 mm dia.
05.06/00073280
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax:315-697-5867 e-mail:info@jumo.us Internet:www.jumo.us
Page 7/7
Order details
Dial thermometer Class 1.5, Type 608201
Order code (8) 000 103 104 105 114 (9) 26 96 95 (10) 00 01 26 46 (11) 0 50 100 150 200 ... (12) 000 430 440 473 410 315 404 522 651 Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 thread G1/2 thread G3/4 thread M 10 x 1 thread (with TA 23 and SH 11 only) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) probe / brass (CuZn) support tube (above 250C) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Extra codes (TZ) no extra code peak-reading pointer, with housing diameters 60, 80 and 100 mm (not with TZ 473 or TZ 404) housing with bimetal compensation housing with damping fluid (only with basic type extension: 2060, 2260, 2360, 2010, 2210, 2310) metal bezel ring, bezel or flange, black capillary reinforcement on housing and probe (not with FL 21) IP65 enclosure protection to EN 60 529 (only with basic type extension: 2060, 2260, 2360, 2010, 2210, 2310) customized scale peak-reading pointer adjustable with screwdriver; protected by screw-on cap (not available with TZ 473 or TZ 404) Special versions on request!
(2) ....
(3) ...
(4) ..
(5) ....
(6) ...
(7) ..
(8) ...
(9) ..
(12) .. 0003
...
1010
- 818 -
00
- 750 -
- 000 -
26
26
- 100 /
See Data Sheet 60.8730 for description and features Screw-in spigot to DIN 3852 Form A. List extra codes in sequence, separated by commas.
5 . 0 6 / 0 0 0 7 3 2 8 0
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Dial Thermometer
Temperature indicator for panel mounting Class 2 IP53 front protection Housing sizes: 52 mm and 60 mm dia. Bezel: 48x48 mm, 52x52 mm and 72x72 mm
Brief description
Dial thermometers are universal temperature indicators for monitoring the temperature. The instruments feature a plastic housing with a liquid-filled measuring system. The temperature-dependent change in volume of the liquid-filled measuring system is converted into a rotary movement of the pointer by a Bourdon tube, without any intermediate gearing. Type 608202/2660
Type 608202/2772
Technical data
Housing or bezel Protection Window Scale Accuracy class Indication adjustment Limit temperatures Nominal position Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per meter) black plastic (ABS) IP53 front protection to EN 60529 polycarbonate (PC), standard size 60 in PMMA (Plexiglas) white, black lettering Class 2 to EN 13190 at the housing rear storage and transport -20 to +60C (indication range -40 to +40C: up to 50C) unrestricted liquid-filled approx. 12 sec, measuring in agitated water bath, with a 6 mm dia. probe in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range per C change in ambient temperature 0.03% of indication range per C change in ambient temperature at higher ambient temperature higher temperature indication
05.06/00073283
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Dimensions
Type: 608202/2060
Type: 608202/2652
Type: 608202/2660
05.06/00073283
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Dimensions
Type: 608202/2748
Panel cut-out: 45 x 45
+0.6 0 mm
Type: 608202/2752
Panel cut-out: 45 x 45
+0.6 0 mm
Type: 608202/2772
05.06/00073283
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Order details
Dial thermometer, Class 2, Type 608202
Order code 608202 (1) Basic type Mechanical dial thermometer, Class 2 Basic type extensions
(2)
2060
2652 2660 2748 2752 2772 (3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 (4) 02 11 17 21 (5) 1000 2000 3000 4000 5000 ....
Style: 26; housing size: 52 mm dia. Style: 26; housing size: 60 mm dia. Style: 27; housing size: 48 mm dia. Style: 27; housing size: 52 mm dia. Style: 27; housing size: 72 mm dia. Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 02.0C -30 to +050C; measuring range 020 to +040C, accuracy 02.0C -20 to +120C; measuring range 030 to +100C, accuracy 04.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 02.0C -00 to +080C; measuring range 0+10 to +070C, accuracy 02.0C -00 to +100C; measuring range 0+10 to +090C, accuracy 02.0C -00 to +120C; measuring range 0+20 to +100C, accuracy 04.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 04.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 04.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 05.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 04.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 10.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 05.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 10.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 10.0C Capillary type (FL)1 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm)
05.06/00073283
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
Dial thermometer, Class 1.5, Type 608202
Order code (6) 750 752 843 161 847 311 872 873 401 848 913 820 Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, SH 09; conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip TA 25; sliding clamp fitting on capillary2 SH 09; (with FL 17 and FL 21 only) SH 07; screw-in pocket, assembled, SH 09; with clamping clip and fixing screw2 (with TF 01) SH 09; weld-in pocket, assembled, SH 09; with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) (with TF 01) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 (7) 6 8 10 11 12 (8) 000 103 104 105 114 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia. 11 mm dia. 12 mm dia. Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 thread G1/2 thread G3/4 thread M 10 x 1 thread (with TA 23 and SH 11 only)
876 871
05.06/00073283
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
Dial thermometer, Class 1.5, Type 608202
Order code (9) 26 96 95 (10) 00 01 26 46 (11) 0 50 100 150 200 ... (12) 000 440 455 410 411 315 522 Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) probe / brass (CuZn) support tube (above 250C) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Extra codes (TZ) no extra code housing with bimetal compensation mounting bracket at rear with 60 mm housing dia. and 72 x 72 mm bezel metal bezel or flange, black metal bezel or flange capillary reinforcement on housing and probe (not with FL 21) customized scale Special versions on request!
(2) ....
(3) ...
(4) ..
(5) ....
(6) ...
(7) ..
(8) ...
(9) ..
(12) .. 0003
...
2660
- 832 -
11
2000
- 161 -
- 104 -
96
46
- 150 /
See Data Sheet 60.8730 for description and features Screw-in spigot to DIN 3852 Form A. List extra codes in sequence, separated by commas.
05.06/00073283
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
Dial Thermometer
temperature indicator for panel mounting or self-supporting stainless steel housing with bayonet lock Class 1 IP65 protection housing sizes: 100 mm and 160 mm dia.
Brief description
Dial thermometers are universal instruments for temperature measurement and monitoring. The volume change in a liquid-filled measuring system as an effect of temperature, or the change of pressure with temperature inside a gas-filled system, is converted into a rotation of the pointer by means of a Bourdon tube, without any intermediate gearing. The pointer is directly linked to the measuring system, which makes the overall system extremely torsionally rigid. Vibrations are transmitted to the pointer only to a minor extent.
Type 608225/1016
Technical data
Housing Enclosure protection Window Scale Accuracy class Reinforcement spring Indication adjustment Limit temperatures Nominal position (NL) housing with bayonet lock in stainless steel (1.4301) IP65 to EN 60 529 glass, with extra code 434: polycarbonate white, black lettering Class 1 to EN 13190 instruments with capillary: on housing and temperature probe at the back (no indication adjustment on Style 01) for transport and storage -20C to +70C (for the 0 to +60C range: up to 65C)
unrestricted
liquid-filled indication range 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe gas-filled indication range 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per m)
in % of indication range (referred to the deviation from the +23C reference value) 0.15% of indication range 0.05% of indication range per C ambient temperature change per C ambient temperature change 0.03% of indication range no effect per C ambient temperature change higher ambient temperature higher temperature indication lower switching point
12.06/00402693
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Dimensions
D 1
L1 S
1
16
H1 L5 H
D1
H2
16
L5
H1
D3 D2
L1
S1
H 6
13 H1
3x120
12.06/00402693
D 1
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Dimensions
Types: 608225/2210 608225/2216
D3 D2
_ <
H 10 H1
H2
a
3x120
13
H D1 H1
H2
D 1
56
7.4
H 50 50
H1 19 21
H2 17.5
D 99 159
D1 101.5 161.5
D2 116 178
D3 132 196
a 4.8 5.8
b 52 82
28
L5 401
12.06/00402693
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Order details
Dial thermometer Class 1, Type 608225
Order code 608225 0110 0116 1010 1016 2010 2016 2210 2216 2310 2316 (3) 469 566 807 810 814 818 826 832 834 840 843 848 854 (4) 00 04 (5) 0 1000 2000 3000 4000 5000 .... (6) 750 753 752 843 161 846 847 891 913 (1) (2) Basic type Mechanical dial thermometer Basic type extension Style: 01; housing size: 100 mm dia. Style: 01; housing size: 160 mm dia. Style: 10; housing size: 100 mm dia. Style: 10; housing size: 160 mm dia. Style: 20; housing size: 100 mm dia. Style: 20; housing size: 160 mm dia. Style: 22; housing size: 100 mm dia. Style: 22; housing size: 160 mm dia. Style: 23; housing size: 100 mm dia. Style: 23; housing size: 160 mm dia. Indication range (AB) -40 to +40C; range -30 to +030C Accuracy 1.0C -30 to +50C; range -20 to + 40C Accuracy 1.0C -30 to +60C; range +10 to +050C Accuracy 1.0C -30 tot +80C; range +10 to +070C Accuracy 1.0C -30 to +100C; range +10 to +090C Accuracy 1.0C -30 to +120C; range +20 to +100C Accuracy 2.0C -30 to +160C; range +20 to +140C Accuracy 2.0C -30 to +200C; range +20 to +180C Accuracy 2.0C -30 to +250C; range +30 to +220C Accuracy 2.5C -30 to +300C; range +30 to +270C Accuracy 5.0C -50 to +350C; range +50 to +300C Accuracy 5.0C -50 to +400C; range +50 to +350C Accuracy 5.0C -50 to +500C; range +50 to +450C Accuracy 5.0C Capillary type (FL)1 none (for rigid stem mounting) FL04 stainless steel capillary (1.4571), 2.2 mm dia. Capillary length1 none (for rigid stem mounting) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (details in plain text: in 1000 mm steps, maximum length 10000 mm) Process connection (PA)1 TF01 temperature probe with shouldered support tube TF05 temperature probe with plain support tube TF11 temperature probe without support tube TA02 TA03 TA04 TA06 SH05 SH07 stem with union nut and loose nipple2 stem with loose union nut (on TF01) stem with fixed hexagon screw-in spigot2 sliding clamp fitting on support tube 2 screw-in pocket, assembled2 (with 14 mm dia. only) screw-in pocket, assembled, with clamping clip and fixing screw2
12.06/00402693
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Order details
Dial thermometer Class 1, Type 608225
Order code 06 08 10 14 000 103 104 105 (9) 26 97 (10) 00 050 100 150 200 ... (11) 000 (7) Diameter of process connection (PA)1 06 mm 08 mm 10 mm 14 mm (SH05 only) Thread for process connection (PA)1 no thread (TF01, TF05 and TF11) thread G 3/8 thread G 1/2 thread G 3/4 Material of process connection (PA)1 stainless steel (1.4571) stainless steel (1.4571)-TF / brass -TA, SH Fitting length of process connection (PA)1 (dimension "EL" or "S") minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (details in plain text, in 50 mm steps) Extra codes (TZ) no extra code
(8)
434
522
Order code (1) 608225 / (2) .... (3) ... (4) .. (5) .... (6) ... (7) .. (8) ... (9) .. (10) ... / (11) ... , ...
2010
818
04
2000
750
000
26
100
0003
For description and special features see Data Sheet 60.8730 Screw-in spigot to DIN 3852 Form A List extra codes in sequence, separated by commas
12.06/00402693
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
Brief description
The bimetal temperature switch lends itself to universal use. Areas of application include temperature monitoring/control and signaling in cooling and heating systems, compressors and motors. The temperature switch can, to a limited extent, also be used as a temperature controller. The temperature change is transferred to a mechanism via the fitting. When the switching temperature is reached, the temperature switch is activated.
Type 608301/10-...-..-01
Technical data
Faston connector A 6.3-08 Fitting Protection Electrical contact Snap-action switch Connection Contact rating 15(13.5) A, 115 V AC +10/ -15%, 48 63Hz, p.f. = 1 (0.75) Contact resistance Breakdown strength Electrical contact Slow-action conctact Contact rating IP52 Connecting cable with cable gland Form A for sealing and sealing ring IP65 IP67
Plug connector for cable connection * sealing with sealing lip IP65 cable diameter 6 8 mm; earth contact not connected
cable diameter approx. 5.5 mm; core cross-section 0.75 mm2 5 A, 30 V DC, +10 / -15% 10(10) A, 230 V AC +10/-15%, 48 63Hz, p.f. = 0.75
10(10) A, 115 V AC +10/-15%, 48 63Hz, p.f. = 1 (0.75) < 30 m 1500 V AC /1min 8 A, 12 V DC +10/-15% 4 A, 24 V DC +10/-15% 6 A, 115 V AC +10/-15%, 48 63Hz
If the bimetal temperature switch is operated off a voltage above 50 V, the fitting must be provided with a protective earth according to VDE or the corresponding local regulations. * to EN 175301-803 (DIN 43650)
10.05/00339836
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Technical data
Snap-action switch Switching temperature Reset temperature Switching point accuracy Vibration strength Dynamic response Switching output (SA) +40C to +140C; 5 C steps 15 to 30 C below the switching temperature approx. 1.5 C below the switching temperature (measured in water bath, switching point 40C) Slow-action contact
Dimensions
Type 608301/10-...-..-01 27 a/f 24 a/f
Type 608301/10-...-..-18
27 7 a/f
24 a/f
10.05/00339836
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Dimensions
Type 608301/10-...-..-61
34 a/f
24 a/f
Type 608301/20-...-..-61
50
S = 35
16,5
Types
608301/10-...-..-11 608301/20-...-..-11
27 a/f SW27
S= 28
18,5
10.05/00339836
29
11,5
53
44
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
Order details
Bimetal temperature switch Type 608301 (1) 608301 (2) X X X X 10 20 (3) ... (4) X X X X X X X X X X 98 99 (5) X X X X 01 61 18 11 (6) 50 78 (7) 10 11,5 (8) 121 104 (9) 28 35 (10) X X X X X X X X X X X X X X 0 1000 2000 3000 4000 5000 (11) 000 Basic type Electromechanical temperature switch with a fixed switching temperature Basic type extension snap-action switch slow-action contact Switching temperature in degrees, within the range from +40C to +140C, in 5 C increments (e.g. 85 + 85C) Switching output (SA) break (n.c.) (SA01) make (n.o.) (SA02) Electrical connection faston connector A 6.3-0.8 DIN 46244 plug connector for cable connection to EN 175301-803 (DIN 43650) connecting cable with cable gland encapsulated connecting cable (continuous operating temperature: 120C max.) Material of process connection brass (CuZn) stainless steel (CrNi, 1.4305) Diameter of process connection (PA), dimension d 10,0 mm 11.5 mm Type of thread for process connection (PA) thread M14x1.5 thread G 1/2 Fitting length of process connection (PA), dimension S 28 mm 35 mm Cable length none 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm Extra codes (TZ) no extra codes Other versions (switching temperatures, fitttings etc.) available on request.
Order code (1) 608301 / (2) ... (3) ... (4) .. (5) .. (6) .. (7) ... (8) ... (9) .. (10) .... / (11) ...
10
85
98
01
50
10
121
35
000
10.05/00339836
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Brief description
Contact dial thermometers are universally applicable instruments with indication of the actual value, for temperature measurement, control and monitoring. The temperature-dependent change in volume of a liquid-filled measuring system (or the temperature-dependent change of pressure in a gas-filled measuring system) is converted into a rotary movement of the pointer by a Bourdon tube, without any intermediate gearing. The rotary movement of the pointer shaft is used to operate the switched output. The pointer is directly linked to the measuring system, which makes the overall system extremely torsionally rigid. Vibrations are transmitted to the pointer only to a minor extent. The switched output can be implemented as a slow-break, magnetic snap-action or inductive contact. The slow-break or magnetic snap-action contact is an auxiliary circuit switch that, depending on the direction of movement, opens or closes an electrical circuit at the set limits, by means of a contact arm that is attached to the moving pointer. The inductive contact is an electronic limit detector operated by a contactless position sensor (proximity switch).
Type 608425/2316
Type 608425/2496
Technical data
Housing Enclosure protection Electrical connection Type 608425 round panel- or surface-mounting housing housing with bayonet lock in stainless steel (1.4301) IP65 as per EN 60 529 Typ 608425 square panel-mounting instrument galvanized sheet steel housing, fixed at back by a bracket; front bezel in stainless steel (1.4301) front: IP51 as per EN 60 529 back: IP00 as per EN 60 529 screw terminals: conductor cross-section up to 2.5mm2
Glass window Scale Accuracy class Anti-kink spring Setpoint adjustment Indication correction Temperature limits Operating position (NL) Measuring system Time constant t0.632 Ambient temperature error at housing on capillary (per meter)
terminal box: conductor cross-section up to 2.5mm2 cable gland suitable for cable dia. 6.5 13 mm polycarbonate plexiglas (PMMA) white, black lettering Class 1 to EN 13190 for capillary instruments, at the housing and probe through setpoint adjuster on the glass window at the back, no indication correction for styles 01 and 20 (100 mm dia.) for transport and storage -20C to +70C (with a 0 to +60C range: max. 65C) unrestricted Liquid filling range (AB) 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe
Gas filling range (AB) 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
in % of indication range (referred to the deviation from the reference value at +23C) 0.05% of indication range 0.15% of indication range per C change of ambient temperature per C change of ambient temperature 0.03% of indication range no effect per C change of ambient temperature At higher ambient temperatures higher temperature indication lower switching point
05.06/00402234
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
electromechanical slow-break contact electromechanical magnetic snap-action contact with single-pole make contacts with single-pole make contacts 230 V AC/DC, +10/-15%, 48 63Hz, p.f = 1 (0.6) max. 18 VA / 10 W max. 50 VA / 30 W 0.5% of indication range approx.2% of indication range 0.5% of indication range (referred to the switching point for rising temperature) To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA Electromechanical limit contact SA 01 to SA 11 Inductive limit contact SA 30 and SA 31 The inductive limit contact is operated by a contactless proximity switch. The sensor is a slottype initiator attached to the setpoint indicator. The control flag is activated by the pointer. If the control flag moves into the sensor gap, the internal resistance increases (active area is damped: initiator is high-resistance, relay is de-energized). The switching amplifier of the control device responds to the resulting change in current. Switching action according to the active current principle. Control flag is not within the sensor air gap, relay is energized:
Current drawn 3mA (active area is clear, the oscillator is active). Control flag is within the sensor air gap, Relay is de-energized:
Current drawn 1mA (active area is damped, no oscillation). Inductive limit contact as per Directive 94/9 EC (ATEX), suitable for II 2 G EEx ia IIC T6 for switching sequence and diagrams: see order details For electromechanical limit detectors we recommend using Type MSR multi-function relays from:Wiebrock Mess- und Regeltechnik GmbH, www.wiebrock.de. These switching amplifiers increase the switching reliability and switching capacity of slow-break and magnetic snap-action contacts, and reduce their contact loading. Unintended switching of the limit contact (caused by vibration) can be considerably reduced by using a drop-out delay. With inductive limit detectors, you can use the transistor relay: Type KFA6-SR2-Ex...W (II (1) G D [EEx ia] IIC) from Pepperl & Fuchs (www.pepperlfuchs.de). Intrinsic safety II 2 G EEx ia IIC T6 can only be ensured if this transistor relay is used.
05.06/00402234
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Dimensions
Types: 608425/0110 608425/0116
D 1 119.5
49.5
74
L8
L1 S1 L5 H
16
H1
119.5 D 1 H
49.5
74
L8
H1
L5
16
H2
S1
1
D3 D 2 D1 44
164 H H1
H4 3x120
Panel cut-out for housing diameter 100mm = 105.5+0.5 mm diameter 160mm = 165.5+0.5 mm
1
05.06/00402234
D1 +2
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
D 3 D 2 D 1 H H1 H3
49.5
74
13
L8 3x120
H2
119.5
H H1
49.5
74
H2
56
7.4
65
100
Panel cut-out 92 x 92
+0.8 0
mm
05.06/00402234
28
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
Contact dial thermometers, Class 1, Type 608425 (1) 608425 608425 (2) X X X X X X X X X X X 0110 0116 1010 1016 2010 2016 2210 2216 2310 2316 2496 (3) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 469 566 807 810 814 818 826 832 834 840 843 848 854 (4) X X X X X X X X X X X X X X X X X 00 04 (5) 0000 1000 2000 3000 4000 5000 .... (6) 750 753 752 843 161 846 847 891 913 Basic type Mechanical contact dial thermometer, Class 1 (round, panel- or surface-mounting instrument) Mechanical contact dial thermometer, Class 1 (square, panel-mounting instrument) Basic type extensions Style: 01; housing size: diameter 100 mm Style: 01; housing size: diameter 160 mm Style: 10; housing size: diameter 100 mm Style: 10; housing size: diameter 160 mm Style: 20; housing size: diameter 100 mm Style: 20; housing size: diameter 160 mm Style: 22; housing size: diameter 100 mm Style: 22; housing size: diameter 160 mm Style: 23; housing size: diameter 100 mm Style: 23; housing size: diameter 160 mm Style: 24; housing size: 96 x 96 mm Indication range (AB) -40 to0 +40C; range -30 to +030C Error limit 1.0C -30 to0 +50C; range -20 to +040C Error limit 1.0C -10 to 0+60C; range +10 to +050C Error limit 1.0C -10 to 0+80C; range +10 to +070C Error limit 1.0C -20 to +100C; range +10 to +090C Error limit 1.0C -20 to +120C; range +20 to +100C Error limit 2.0C -20 to +160C; range +20 to +140C Error limit 2.0C -20 to +200C; range +20 to +180C Error limit 2.0C -30 to +250C; range +30 to +220C Error limit 2.5C -30 to +300C; range +30 to +270C Error limit 5.0C -50 to +350C; range +50 to +300C Error limit 5.0C -50 to +400C; range +50 to +350C Error limit 5.0C -50 to +500C; range +50 to +450C Error limit 5.0C Capillary type (FL)1 none (with rigid stem) FL04 capillary, stainless steel (1.4571), diameter 2.2 mm Capillary length1 none (rigid connection) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: 1000 mm steps, maximum length 10000 mm) Process connection (PA)1 TF01 temperature probe with shoulder on support tube TF05 temperature probe with plain support tube TF11 temperature probe without support tube TA02 stem with union nut and loose nipple (only TF01)2 TA03/01 stem with loose union nut (with TF01) TA04 TA06 SH05 SH07 SH07 stem with fixed hexagon screw-in spigot (only TF01)2 sliding clamp fitting on support tube 2 screw-in pocket, assembled 2 (with 14 mm dia. only) screw-in pocket, assembled, with clamping clip and fixing screw 2
05.06/00402234
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
X X
X X
03 04
SA03 (21)3 SA04 (11)3 SA05 (22)3 SA10 (21)3 SA11 (11)3 SA30 (2)3
With rising temperature: contact 1 opens and contact 2 closes (21)3 With rising temperature: contact 1 and contact 2 close (11)3 With rising temperature: contact 1 opens and contact 2 opens (22)3 With rising temperature: contact 1 opens and contact 2 closes (with separate circuit) (21)3 With rising temperature: contact 1 and contact 2 close (with separate circuits) (11)3
contact contact
05
contact
10
11
contact
30
contact
31
SA31 (1)3
isolating isolating
Extra codes (TZ) no extra code metal front bezel, black electromechanical magnetic snap-action contact setpoint adjustment with key customized scale Special versions on request !
Order code (1) 608425 / (2) .... (3) ... 818 (4) .. 04 (5) .... 2000 (6) ... 750 (7) .. 8 (8) ... 000 (9) .. 26 (10) ... 100 (11) ... 01 / / (12) ... 0004 , , ... ...
for description and features, see Data Sheet 60.8730 2 screw-in spigot to DIN 3852 Form A 3 figures in brackets ( . . ) correspond to the designation of the switching function code as per DIN 16196 4 list extra codes in sequence, separated by a comma
05.06/00402234
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
MICROSTAT-M
Electromechanical temperature controller with indication Class 2 with one microswitch IP53 front protection Housing sizes: 60 mm, 80 mm and 100 mm dia. Bezel sizes: 72 x 72 mm and 96 x 96 mm
Brief description
The MICROSTAT-M is an electromechanical temperature controller with indication for universal use. The instrument has a plastic housing and a liquid-filled or gas-filled measuring system. The temperature-dependent change in volume of a liquid-filled measuring system, or the temperature-dependent change in pressure of a gas-filled system, is converted by a Bourdon tube into a rotary movement of the pointer, without any transmission gearing. The rotary movement of the pointer spindle operates the microswitch through a lever system. Type 608501/2160
Type 608501/2572
Technical data
Housing or bezel Protection Scale Accuracy class Measuring system Time constant t0.632 Ambient temperature error effect on housing on capillary (per meter) liquid-filled indication range 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe black plastic; steel housing (extra code 415) front: IP53 to EN 60 529 rear: IP00 to EN 60 529 (IP54 with extra code 426) white, black lettering Class 2 to EN 13190 gas-filled indication range 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range per C change in ambient temperature 0.03% of indication range per C change in ambient temperature 0.05% of indication range per C change in ambient temperature no effect
higher ambient temperature higher temperature indication lower switching point standard Electrical contact Contact type Contact rating Switching differential Switching point accuracy Switching reliability extra code (TZ) 651 extra code (TZ) 650
single-pole microswitch with a mechanically operated changeover contact 230 V AC +10/-15%, 48 63 Hz, p.f. = 1 (0.6) 5 (1.5) A 3 (1) A 10 (3) A 2 to 4% of indication range approx. 2% of indication range
0.5% of indication range referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA. standard extra code (TZ) 507 screw terminals: for up to 1.5 mm2 conductor cross-section faston connectors A 6.3 x 0.8 to DIN 46 244
by setting device on window for transport and storage: -20 to +70C (for indication range -40 to +40C: up to 50C; for indication range -30 to +50C: up to 60C) unrestricted
05.06/00073301
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Dimensions
Types: 608501/2160 608501/2160 TZ 415
Width of mounting bracket
+0.5 mm 0
+0.5 0 mm
Panel cut-out 82 +0.5 mm 0 Types: 608501/2596 608501/2596 TZ 415 TZ 572 (indicator light), only with 92 x 92 +0.8 mm panel cut-out Width of mounting bracket
+0.5 mm or 0
92 x 92
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Dimensions
Types: 608501/2110 608501/2110 TZ 415
Width of mounting bracket
Panel cut-out 102 Types: 608501/2060 608501/2060 TZ 415 608501/2080 TZ 415 608501/2010 TZ 415
+0.5 mm 0
60 11(14) * 17 D5 8
3x
12
D3
Type
D1
D3 (mm)
D4
D5
608501/2060 608501/2060 TZ 415 608501/2080 TZ 415 608501/2010 TZ 415 Extra code 426
60 80 100
66 86 107
75 95 116
85 110 132
62 82 102
05.06/00073301
D1
D4
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Order details
MICROSTAT-M Type 608501
Order code 608501 (1) Basic type Mechanical temperature controller MICROSTAT-M Class 2, with one microswitch Basic type extensions Style: 20; housing size: 060 mm dia. Style: 20; housing size: 080 mm dia. Style: 20; housing size: 100 mm dia. Style: 21; housing size: 060 mm dia. Style: 21; housing size: 080 mm dia. Style: 21; housing size: 100 mm dia. Style: 25; housing size: 72 x 72 mm Style: 25; housing size: 96 x 96 mm (3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 848 851 854 858 (4) 02 11 17 21 (5) 1000 2000 3000 4000 5000 .... Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 02.0C -30 to +050C; measuring range 020 to +040C, accuracy 02.0C -20 to +120C; measuring range 030 to +100C, accuracy 04.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 02.0C -00 to +080C; measuring range 0+10 to +070C, accuracy 02.0C -00 to +100C; measuring range 0+10 to +090C, accuracy 02.0C -00 to +120C; measuring range 0+20 to +100C, accuracy 04.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 04.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 04.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 05.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 04.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 10.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 05.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 10.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 10.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 10.0C -00 to +450C; measuring range 0+50 to +400C, accuracy 10.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 10.0C -00 to +600C; measuring range +100 to +500C, accuracy 15.0C Capillary type (FL)1 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm)
05.06/00073301
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
MICROSTAT-M Type 608501
Order code (6) 750 752 843 161 847 311 872 873 401 913 820 876 871 (7) 6 8 10 11 12 (8) 000 103 104 105 114 (9) 26 96 95 Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; weld-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia. 11 mm dia. 12 mm dia. Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 thread G1/2 thread G3/4 thread M 10 x 1 thread (with TA 23 and SH 11 only) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) - probe / brass (CuZn) - support tube (from 250C)
00 01 26 46
(10) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn)
05.06/00073301
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
MICROSTAT-M Type 608501
Order code 0 50 100 150 200 ... (11) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) (12) Switching output (SA)
1
20
SA 20
one contact
PE 1 N L1 N
2 2
4 4
Connection diagram, standard Connection diagram, with indicator light (TZ 572)
000 507 426 650 410 411 572 510 460 415 315 477 577 520 522 482 651
(13) Extra codes (TZ) no extra code Electrical connection by screw terminals for cable up to 1.5 mm2 conductor cross-section Plastic cover to protect the tab connectors or screw terminals against touching and splashing water, IP54, with cable gland, suitable for 6 8 mm cable dia. Microswitch 10 (3) A ( 230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) (not with TZ 577) Metal front bezel or flange ring, black (not with basic type extensions 2080 and 2180) Metal front bezel or flange ring (not with basic type extensions 2080 and 2180) Indicator light (only with types: 608501/2572 TZ 460, 415 and 608501/2596 TZ 460, 415) Stop for upper or lower limit of setpoint adjustment, factory-set Housing centered for panel cut-out 68 x 68 mm and 92 x 92 mm (with basic type extensions 2572 and 2596 only) Steel housing with metal bezel or flange Capillary reinforcement on housing and probe (not with FL21) Setpoint adjustment protected by screw cap. Adjustment with tool. Protection against capillary break (not with TZ 650, 651) Switching point fixed in the factory. Customized scale Knob 22 x 10 mm dia. Microswitch 3 (1) A (230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) (not with TZ 577) Special versions on request!
(2) ....
(3) ...
(4) ..
(5) ....
(6) ...
(7) ..
(8) ...
(9) ..
(13) ...
, ...
2160
- 818 -
21
2000
- 750 -
- 000 -
96
00
- 100 -
20
/ 0003
See Data Sheet 60.8730 for description and features. Screw-in spigot to DIN 3852 Form A. 3 List extra codes in sequence, separated by commas. 05.06/00073301
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
MICROSTAT-M
Electromechanical temperature controller with indication Class 2 with two microswitches IP53 front protection Housing sizes: 60 mm, 80 mm and 100 mm dia. Bezel sizes: 72 x 72 mm and 96 x 96 mm
Brief description
The MICROSTAT-M is an electromechanical temperature controller with indication for universal use. The instrument has a plastic housing and a liquid-filled or gas-filled measuring system. The temperature-dependent change in volume of a liquid-filled measuring system, or the temperature-dependent change in pressure of a gas-filled system, is converted by a Bourdon tube into a rotary movement of the pointer, without any transmission gearing. The rotary movement of the pointer spindle operates the microswitches through a lever system.
Type 608502/2160
Type 608502/2596
Technical data
Housing or bezel Enclosure protection Scale Accuracy class Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per meter) black plastic; steel housing (extra code 415) front: IP53 to EN 60 529 rear: IP00 to EN 60 529 (IP54 with extra code 426) white, black lettering Class 2 to EN 13190 liquid-filled gas-filled indication range 350C indication range 400C approx. 12 sec, measured in water bath, approx. 4 sec, measured in oil bath, with a 6 mm dia. copper probe with a 10 mm dia. stainless steel prob in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range 0.05% of indication range per C change in ambient temperature per C change in ambient temperature 0.03% of indication range no effect per C change in ambient temperature higher ambient temperature higher temperature indication lower switching point standard Electrical contact Contact type Contact rating Switching differential Switching point accuracy Switching reliability extra code (TZ) 650
single-pole microswitch with a mechanically operated changeover contact 230 V AC +10/-15%, 48 63 Hz, p.f. = 1 (0.6) 5 (1.5) A 10 (3) A approx. 2% of indication range 2 to 4% of indication range 0.5% of indication range referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA. standard extra code (TZ) 507 faston connectors A 6.3 x 6.8 to DIN 46 244 screw terminals: for cable up to 1.5 mm2 conductor cross-section by setting device on the window With ambient temperatures that deviate considerably from the shift division by reference value but are constant, the indication can be adjusted max. 4.5% of the scale by using a screwdriver as shown span by inserting a (not possible on Style 25). screwdriver in bore for transport and storage: -20 to +70C (for indication range -40 to +40C: up to 50C; for indication range -30 to +50C: up to 60C) unrestricted
05.06/00089192
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Dimensions
Types: 608502/2160 608502/2160 TZ 415 Actual-value indicator Setpoint 1 (green) Setpoint 2 (red) Mounting
Setpoint 2 Setpoint 1
Width of mounting
+0.5 mm 0
+0.5 mm 0
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Dimensions
Types: 608502/2110 TZ 415 Width of mounting
Panel cut-out 102 Types: 608502/2060 608502/2060 TZ 415 608502/2080 TZ 415 608502/2010 TZ 415
+0.5 mm 0
max. 89
max. 23 17 D5
120
3x
D1
D3
Type
D1
D3 (mm)
D4
D5
608502/2060 608502/2060 TZ 415 608502/2080 TZ 415 608502/2010 TZ 415 Extra code 426
60 80 100
68 86 107
75 95 116
85 110 132
05.06/00089192
D4
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Order details
MICROSTAT-M Type 608502
Order code 608502 (1) Basic type Mechanical temperature controller MICROSTAT-M, Class 2, with two microswitches Basic type extensions Style: 20; housing size: 60 mm dia. Style: 20; housing size: 80 mm dia. Style: 20; housing size: 100 mm dia. Style: 21; housing size: 060 mm dia. Style: 21; housing size: 080 mm dia. Style: 21; housing size: 100 mm dia. Style: 25; housing size: 72 x 72 mm Style: 25; housing size: 96 x 96 mm (3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 848 851 854 858 (4) 02 11 17 21 (5) 1000 2000 3000 4000 5000 ....
Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 02.0C -30 to +050C; measuring range 020 to +040C, accuracy 02.0C -20 to +120C; measuring range 030 to +100C, accuracy 04.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 02.0C -00 to +080C; measuring range 0+10 to +070C, accuracy 02.0C -00 to +100C; measuring range 0+10 to +090C, accuracy 02.0C -00 to +120C; measuring range 0+20 to +100C, accuracy 04.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 04.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 04.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 05.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 04.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 10.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 05.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 10.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 10.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 10.0C -00 to +450C; measuring range 0+50 to +400C, accuracy 10.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 10.0C -00 to +600C; measuring range +100 to +500C, accuracy 15.0C Capillary type (FL)1 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm)
05.06/00089192
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
MICROSTAT-M Type 608502 Order code (6) 750 752 843 161 847 311 872 873 401 913 820 876 871 (7) 6 8 10 11 12 (8) 000 103 104 105 114 (9) 26 96 95 Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; weld-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia. 11 mm dia. 12 mm dia. Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 thread G1/2 thread G3/4 thread M 10 x 1 thread (with TA 23 and SH 11 only) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) - probe / brass (CuZn) - support tube (250C and above)
05.06/00089192
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
MICROSTAT-M Type 608502
Order code (10) 00 01 26 46 (11) 0 50 100 150 200 ... (12) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Switching output (SA)
21
SA 21
two contacts
(13) 000 507 426 650 410 411 572 510 573 460 415 315 477 522
Connection diagram, standard Connection diagram, with indicator light (TZ 572) Extra codes (TZ) no extra code electrical connection by screw terminals for cable up to 1.5 mm2 conductor cross-section plastic cover to protect the faston connectors or screw terminals against touching and splashing water, IP54, with cable gland, suitable for 6 8 mm cable dia. microswitch 10 (3) A ( 230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) metal bezel or flange, black (not with basic type extensions 2080 and 2180) metal bezel or flange (not with basic type extensions 2080 and 2180) indicator light (only with types: 608502/2572 TZ 460, 415 and 608502/2596 TZ 460, 415) stop for upper or lower limit of setpoint adjustment, factory-set two changeover contacts with a fixed spacing; minimum spacing: 2% of scale span; please state contact spacing when ordering housing centered for panel cut-out 68 x 68 mm and 92 x 92 mm (with basic type extensions 2572 and 2596 only) steel housing with metal bezel or flange capillary reinforcement on housing and probe (not with FL21) setpoint adjustment protected by screw cap, adjustment with tool. customized scale Special versions on request!
(2) ....
(3) ...
(4) ..
(5) ....
(6) ...
(7) ..
(8) ...
(9) ..
(10) ..
(11) .. -
(12) ..
(13) ...
...
Order example 608502 / 2160 - 818 - 21 - 2000 1 See data sheet 60.8730 for description and features. 2 Screw-in spigot to DIN 3852 Form A. 3 List extra codes in sequence, separated by commas. 05.06/00089192
752
000
96
00
21
/ 0003
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/4
MICROSTAT-M1
Electromechanical temperature controller with indication Class 2 with one microswitch IP53 front protection
Brief description
The MICROSTAT-M1 is an electromechanical temperature controller with indication for universal use. The instrument has a plastic housing and a liquid-filled or gas-filled measuring system. The temperature-dependent change in volume of a liquid-filled measuring system, or the temperature-dependent change in pressure of a gas-filled system, is converted by a Bourdon tube into a rotary movement of the pointer, without any transmission gearing. The rotary movement of the pointer spindle operates the microswitch through a lever system. Type 608504/2160
Type 608504/2572
Technical data
Housing or bezel Enclosure protection Scale Accuracy class Setpoint adjustment Limit temperatures Nominal position black plastic; housing fixing at rear, with bracket front: IP53 to EN 60 529 rear: IP00 to EN 60 529 (IP54 with extra code 426) white, black lettering Class 2 to EN 13 190 by setting device on the window for transport and storage: -20 to +70C (indication range -40 to +40C: up to 50C max.). unrestricted liquid-filled indication range (AB) 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe gas-filled indication range (AB) 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per meter)
in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range 0.05% of indication range per C change in ambient temperature per C change in ambient temperature 0.03% of indication range no effect per C change in ambient temperature higher ambient temperature higher temperature indication lower switching point
Electrical contact Contact type Contact rating Switching differential Switching point accuracy Switching reliability Electrical connection
0.5% of indication range referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA.
faston connectors A 6.3 x 0.8 to DIN 46 244
05.06/00386806
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/4
Dimensions
Type: 608504/2160 Width of mounting Befestigungsbgelbreite
69 62 11 21 5
60
64
Panel cut-out 62
+0.5 mm 0
60 12 21 6
60
72
Panel cut-out 62
+0.5 mm 0
max.93
32
59
15
05.06/00386806
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/4
Order details
MICROSTAT-M1 Type 608504
Order code 608504 (1) (2) Basic type Mechanical temperature controller MICROSTAT-M1, Class 2, with one microswitch Basic type extensions
2160
2572
(3) 469 810 818 832 840 848 854 (4) 02 11 17 21 (5) 1000 2000 3000 4000 5000 .... (6) 750 752 161 847 311 872 873 401 913 876 871 (7) 6 8 10
Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 02.0C -00 to +080C; measuring range 0+10 to +070C, accuracy 02.0C -00 to +120C; measuring range 0+20 to +100C, accuracy 04.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 04.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 10.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 10.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 10.0C Capillary type (FL)1 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm) Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia.
05.06/00386806
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/4
Order details
MICROSTAT-M1 Type 608504
Order code 000 103 104 105 114 26 96 95 (10) 00 26 46 (11) 0 50 100 150 200 ... (12) (8) Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 thread G1/2 thread G3/4 thread M 10 x 1 thread (with TA 23 and SH 11 only) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) - probe / brass (CuZn) - support tube (250C and above) Material of process connection (PA)1 none (TF01 and TF11 only) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Switching output (SA)
(9)
20
SA 20
one contact
(13) 000 315 411 426 477 510 520 522 577
Extra codes (TZ) no extra code capillary reinforcement on housing and probe (not with FL21) metal bezel or flange plastic cover to protect the faston connectors against touching and splashing water, IP54 (rear), with cable gland, suitable for 6 11 mm cable dia. setpoint adjustment protected by cap, adjustment with screwdriver. stop for upper or lower limit of setpoint adjustment, factory-set switching point fixed at the factory customized scale capillary break protection Special versions on request!
/ /
(4) .. 02
(7) .. 8
(9) .. 96
(10) .. 00
(12) .. 20
/ /
See data sheet 60.8730 for description and features Screw-in spigot to DIN 3852 Form A List extra codes in sequence, separated by commas.
05.06/00386806
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
MICROSTAT-M
Electromechanical temperature controller with indication Class 1.5 with one microswitch IP53 front protection Housing sizes: 60 mm, 80 mm and 100 mm dia. Bezel sizes: 72 x 72 mm and 96 x 96 mm
Brief description
The MICROSTAT-M is an electromechanical temperature controller with indication for universal use. The instrument has a steel housing and a liquid-filled or gas-filled measuring system. The temperature-dependent change in volume of a liquid-filled measuring system, or the temperature-dependent change in pressure of a gas-filled system, is converted by a Bourdon tube into a rotary movement of the pointer, without any transmission gearing. The rotary movement of the pointer spindle operates the microswitch through a lever system.
Type 608510/2160
Type 608510/2572
Technical data
Housing or bezel Protection Scale Accuracy class Measuring system Time constant t0.632 Ambient temperature error effect on housing on capillary (per meter) zinc-plated steel, with metal bezel; housing mounted at the rear by a bracket (not for style 20) front: IP53 to EN 60 529 (IP54 with extra code 489) rear: IP00 to EN 60 529 (IP54 with extra code 426) white, black lettering Class 1.5 similar to EN 13 190 liquid-filled gas-filled indication range 350C indication range 400C approx. 12 sec, measured in water bath, approx. 2 sec, measured in an oil bath, with a 6 mm dia. copper probe with a 10 mm dia. stainless steel probe. in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range approx. 4 sec, measured in oil bath, per C change in ambient temperature with a 10 mm dia. stainless steel probe 0.03% of indication range no effect per C change in ambient temperature higher ambient temperature higher temperature indication lower switching point standard Electrical contact Contact type Contact rating Switching differential Switching point accuracy Switching reliability extra code (TZ) 651 extra code (TZ) 650
single-pole microswitch with a mechanically operated changeover contact 230 V AC +10/-15%, 48 63 Hz, p.f. = 1 (0.6) 5 (1.5) A 3 (1) A 10 (3) A approx. 1.5% of indication range 1.5 to 3% of indication range 0.5% of indication range span referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA. standard extra code (TZ) 507 faston connectors A 6.3 x 0.8 to DIN 46244 screw terminals: for cable up to 1.5 mm2 conductor crosssection by setting device on the window for transport and storage: -20 to +70C (for indication range -40 to +40C: up to 50C; for indication range -30 to +50C: up to 60C) unrestricted
06.06/00073306
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Dimensions
Type: 608510/2160
Width of mounting bracket
+0.5 mm 0
+0.5 mm 0
+0.5 0 mm or
92 x 92
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Dimensions
Type: 608510/2110
Width of mounting bracket
+0.5 mm 0
60 14 17 D5 8
3x
120
D1
D3
Type
D1
D3 (mm)
D4
D5
60 80 100
66 86 107
75 95 116
85 110 132
Cable gland
06.06/00073306
D4
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Order details
MICROSTAT-M Type 608510 Order code 608510 (1) Basic type Electromechanical temperature controller MICROSTAT-M, Class 2, with one microswitch Basic type extensions Style: 20; housing size: 060 mm dia. Style: 20; housing size: 080 mm dia. Style: 20; housing size: 100 mm dia. Style: 21; housing size: 060 mm dia. Style: 21; housing size: 080 mm dia. Style: 21; housing size: 100 mm dia. Style: 25; housing size: 72 x 72 mm Style: 25; housing size: 96 x 96 mm (3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 848 851 854 858 (4) 02 11 17 21 (5) 1000 2000 3000 4000 5000 .... Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 01.5C -30 to +050C; measuring range 020 to +040C, accuracy 01.5C -20 to +120C; measuring range 030 to +100C, accuracy 03.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 01.5C -00 to +080C; measuring range 0+10 to +070C, accuracy 01.5C -00 to +100C; measuring range 0+10 to +090C, accuracy 01.5C -00 to +120C; measuring range 0+20 to +100C, accuracy 03.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 03.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 03.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 04.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 03.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 06.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 04.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 06.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 06.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 06.0C -00 to +450C; measuring range 0+50 to +400C, accuracy 06.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 08.0C -00 to +600C; measuring range +100 to +500C, accuracy 10.0C Capillary type (FL)1 FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm)
06.06/00073306
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
MICROSTAT-M Type 608510
Order code (6) 750 752 843 161 847 311 872 873 401 913 820 876 871 (7) 06 08 10 11 12 (8) 000 103 104 105 114 Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; weld-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia. 11 mm dia. 12 mm dia. Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 thread G1/2 thread G3/4 thread M 10 x 1 thread (with TA 23 and SH 11 only)
06.06/00073306
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
MICROSTAT-M Type 608510
Order code (9) 26 96 95 (10) 00 01 26 46 (11) 000 050 100 150 200 ... (12) Material of probe / support tube 1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) - probe / brass (CuZn) - support tube (from 250C) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Switching output (SA)
1
20
SA 20
one contact
1 N L1 N
2 2
4 4
PE
650 410 572 510 460 315 477 577 522 489 651
Connection diagram, standard Connection diagram, with indicator light (TZ 572) Extra codes (TZ) no extra code Electrical connection by screw terminals for cable up to 1.5 mm2 conductor cross-section Plastic cover to protect the faston connectors or screw terminals against touching and splashing water, IP54 at rear, with cable gland, suitable for 6 8 mm cable dia. Microswitch 10 (3) A ( 230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) (not with TZ 577) Metal bezel or flange, black Indicator light (only with types: 608510/2572 TZ 460 and 608510/2596 TZ 460) Stop for upper or lower limit of setpoint adjustment, factory-set Housing centered for panel cut-out 68 x 68 mm and 92 x 92 mm (with basic type extensions 2572 and 2596 only) Capillary reinforcement on housing and probe (not with FL21) Setpoint adjustment protected by screw cap. Adjustment with screwdriver. Protection against capillary break (not with TZ 650 and TZ 651) Customized scale Setpoint adjustment by 28 mm dia. setting device, with aluminium front disk; protected to IP54 at the front Microswitch 3 (1) A (230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) (not with TZ 577) Special versions on request!
(2) ....
(3) ...
(4) ..
(5) ....
(6) ...
(7) ..
(8) ...
(9) ..
(10) ..
(11) ...
(12) ..
(13) ...
, ...
2160
818
21
2000
752
000
96
00
000
20
/ 0003
See Data Sheet 60.8730 for description and features. Screw-in spigot to DIN 3852 Form A. 3 List extra codes in sequence, separated by commas. 06.06/00073306
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/7
Brief description
Contact dial thermometers are universal instruments with indication for temperature measurement, control and monitoring. The volume change with temperature of a liquid-filled system, or the change of pressure with temperature inside a gas-filled system, is converted by a Bourdon tube into a rotation of the pointer without transmission gearing. The movement of the pointer spindle operates a microswitch through a lever system.
Type 608520/2380
Technical data
Housing or bezel Enclosure protection Window Chassis Scale Accuracy class Capillary reinforcement Setpoint adjustment Indication correction Limit temperatures Nominal position (NL) stainless steel (1.4301) IP51 to EN 60 529 (IP53 with extra code 401) PMMA (plexiglass) aluminium (3.2582.05) white, black lettering Class 1.5 similar to EN 13 190 for instruments with capillary: on housing and temperature probe by setting knob on window at the rear for transport and storage -30C to +70C (for indication range -40 to +40C up to 50C; -30 to +50C up to 60C) unrestricted liquid-filled Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per m) indication range (AB) 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe gas-filled indication range (AB) 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range per C change in ambient temperature 0.03% of indication range per C change in ambient temperature 0.05% of indication range per C change in ambient temperature no effect
higher ambient temperature higher temperature indication lower switching point standard Electrical contact contact type contact rating switching differential switching point accuracy switching reliability extra code (TZ) 651 extra code (TZ) 650
single-pole microswitch with mechanically operated changeover contact 230V AC +10/-15%, 48 63Hz, p.f. = 1 (0.6) 5 (1.5) A 3 (1) A 10 (3) A approx. 1.5% of indication range 1.5 to 3% of indication range 0.5% of indication range referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/7
Electrical connection
Housing 60mm dia. cover with cable gland, suitable for cable diameters from 8 to 10 mm
Dimensions
Types: 608520/0280 608520/0210
Connecting cable, 0.5 m long, with screw terminals Types: 608520/1080 608520/1010
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/7
Dimensions
Types: 608520/2060 608520/2080 608520/2010
Panel cut-out on housing 60 mm dia. = 062+0.5 0 mm 80 mm dia. = 082+0.5 0 mm 100 mm dia. = 102+0.5 0 mm
Panel cut-out for bezel 72 x 72 mm = 62+0.5 0 mm dia. 96 x 96 mm = 82+0.5 0 mm dia. or 96 x 96 mm = 92 x 92+0.5 0 mm (TZ 460)
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/7
Dimensions
Types: 608520/2380 608520/2310
Panel cut-out for bezel 72 x 72 mm = 62+0.5 0 mm dia. 96 x 96 mm = 82+0.5 0 mm dia. or 96 x 96 mm = 92 x 92+0.5 0 mm (TZ 460)
H1 7.5 8.5 5
H4 62.5
H5 27.5 28.5 22
H6 34 43.5
H7 27 44 25 27 44
H8 55 59 59 55 59
H9 69 89 109
D 60 80 100 60 80
D1 65 85 106
D2 75 95 116
D3 85 110 132
a 3.6 4.8
b 49 59
L5 40*
L12 72 96
68
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/7
Order details
Contact dial thermometer Class 1.5, Type 608520
Order code 608520 (1) Basic type Mechanical contact dial thermometer Class 1.5 Basic type extension Style: 02; housing size: 80 mm dia. Style: 02; housing size: 100 mm dia. Style: 10; housing size: 080 mm dia. Style: 10; housing size: 100 mm dia. Style: 20; housing size: 060 mm dia. Style: 20; housing size: 080 mm dia. Style: 20; housing size: 100 mm dia. Style: 21; housing size: 060 mm dia. Style: 21; housing size: 080 mm dia. Style: 21; housing size: 100 mm dia. Style: 22; housing size: 080 mm dia. Style: 22; housing size: 100 mm dia. Style: 23; housing size: 080 mm dia. Style: 23; housing size: 100 mm dia. Style: 25; housing size: 72 x 72 mm Style: 25; housing size: 96 x 96 mm (3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 848 851 854 858 Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 1.5C -30 to +050C; measuring range 020 to +040C, accuracy 1.5C -20 to +120C; measuring range 030 to +100C, accuracy 3.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 1.5C -00 to +080C; measuring range 0+10 to +070C, accuracy 1.5C -00 to +100C; measuring range 0+10 to +090C, accuracy 1.5C -00 to +120C; measuring range 0+20 to +100C, accuracy 3.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 3.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 3.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 4.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 3.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 6.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 4.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 6.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 6.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 6.0C -00 to +450C; measuring range 0+50 to +400C, accuracy 6.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 8.0C -00 to +600C; measuring range +100 to +500C, accuracy 10.0C
(2) 0280 0210 1080 1010 2060 2080 2010 2160 2180 2110 2280 2210 2380 2310 2572 2596
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/7
Order details
Contact dial thermometer Class 1.5, Type 608520
Order code (4) 00 02 11 17 21 (5) 0 1000 2000 3000 4000 5000 .... (6) 750 752 843 161 847 311 872 873 401 913 820 876 871 (7) 6 8 10 11 12 (8) 000 103 104 105 114 (9) 26 96 95 Capillary type (FL)1 none (with rigid connection) FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 none (with rigid connection) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (details in plain text: in 1000 mm steps, up to 10000 mm length) Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; weld-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm 08 mm 10 mm 11 mm 12 mm Type of thread for process connection (PA)1 no thread (with TF 01 and TF 11) thread G3/8 thread G1/2 thread G3/4 thread M 10 x 1 (only with TA 23 and SH 11) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) probe / brass (CuZn) support tube (above 250C)
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/7
Order details
Contact dial thermometer Class 1.5, Type 608520
Order code 26 96 95 00 01 26 46 (11) 0 50 100 150 200 ... (12) (9) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) probe / brass (CuZn) support tube (above 250C) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (details in plain text in 50 mm steps) Switch output (SA)
(10)
20
SA 20
one contact
21
SA 21
two contacts
22
SA 22
(13) 000 430 426 650 410 518 460 477 401 522 651
Extra codes (TZ) no extra code peak-reading pointer cover to protect the terminal against accidental contact and splashing water (standard on styles 10 and 23; not with styles 22; not in conjunction with TZ 460) microswitch 10 (3) A (230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) metal bezel, bezel ring or flange ring, black stop for min. or max. setpoint limit, factory-set housing centered for 92 x 92 mm panel cut-out (basic type extension 2596 only) setpoint adjustment protected by screw cap, adjustment by screwdriver IP53 protection to EN 60 529, includes TZ 426 and TZ 477 (not for housing dia. 60 mm and bezel 72 x 72 mm; not with style 02 and 22) customized scale microswitch 3 (1) A (230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) special versions on request!
(2) ....
(3) ...
(4) ..
(5) ....
(6) ...
(7) ..
(8) ...
(9) ..
(12) .. 0003
(13) .. 0003
...
2010
- 818 -
21
2000
- 750 -
- 000 -
26
00
- 100 -
see Data Sheet 60.8730 for description and features screw-in spigot to DIN 3852 Form A List extra codes in sequence, separated by commas.
07.06/00304658
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Brief description
Contact dial thermometers are universal instruments with indication for temperature measurement, control and monitoring. The volume change with temperature of a liquid-filled measuring system, or the change of pressure with temperature inside a gas-filled system, is converted by a Bourdon tube into a rotation of the pointer without transmission gearing. The movement of the pointer spindle operates a microswitch through a lever system.
Type 608523/2210
Technical data
Housing Enclosure protection Window Scale Accuracy class Capillary reinforcement Setpoint adjustment Indication correction Limit temperatures Nominal position (NL) housing with bayonet lock in stainless steel (1.4301) IP65 to EN 60 529 polycarbonate white, black lettering Class 1.5 to EN 13190 for instruments with capillary: on housing and temperature probe by setting knob on window using a screwdriver, protected by screw cap at the rear, no indication correction on style 20 for transport and storage -20C to +70C (for indication range: 0 to +60C up to 65C; -40 to +40C up to 50C; -30 to +50C up to 60C) unrestricted liquid-filled Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per m) indication range (AB) 350C approx. 12 sec, measured in water bath, with a 6 mm dia. copper probe gas-filled indication range (AB) 400C approx. 4 sec, measured in oil bath, with a 10 mm dia. stainless steel probe
in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range per C change in ambient temperature 0.03% of indication range per C change in ambient temperature 0.05% of indication range per C change in ambient temperature no effect
higher ambient temperature higher temperature indication lower switching point standard Electrical contact contact type contact rating switching differential switching point accuracy switching reliability Electrical connection extra code (TZ) 650
single-pole microswitch with mechanically operated changeover contact 230V AC +10/-15%, 48 63Hz, p.f. = 1 (0.6) 5 (1.5) A 10 (3) A approx. 1.5% of indication range 1.5 to 3% of indication range 0.5% of indication range span referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA. terminal box: conductor cross-section up to 2.5 mm2 suitable for cable diameters from 6.5 to 13 mm
06.06/00327954
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Dimensions
Type: 608523/0210
101.5
105
99 49.5
90 L S L5 95
16
74
62
Type: 608523/1010
105 101.5 95
90
49.5
74
99
62 17.5
L5 S
16
Type: 608523/2010
149 95 62
99
4 .8
129
3x 120
06.06/00327954
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Dimensions
Type: 608523/2210
115 95 62
49.5
74
13
90
3x 12
0
99
17.5 105 95
.8 4
Type: 608523/2310
101.5
62
49.5
52
74
99
56
7.4
L5 40 mm 69 mm 42.5 mm 51.5 mm
06.06/00327954
28
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Order details
Contact dial thermometer Class 1.5, Type 608523
Order code 608523 (1) Basic type Mechanical contact dial thermometer Class 1.5 Basic type extension Style: 02; housing size: 100 mm dia.
(2) 0210
1010
2010
2210
2310 (3) 469 566 643 807 810 814 818 826 832 834 926 840 927 843 932 848 851 854 858 (4) 00 02 11 17 21 (5) 0 1000 2000 3000 4000 5000 ....
Style: 23; housing size: 100 mm dia. Indication range (AB) -40 to +040C; measuring range 030 to +030C, accuracy 1.5C -30 to +050C; measuring range 020 to +040C, accuracy 1.5C -20 to +120C; measuring range 030 to +100C, accuracy 3.0C -00 to +060C; measuring range 0+10 to +050C, accuracy 1.5C -00 to +080C; measuring range 0+10 to +070C, accuracy 1.5C -00 to +100C; measuring range 0+10 to +090C, accuracy 1.5C -00 to +120C; measuring range 0+20 to +100C, accuracy 3.0C -00 to +160C; measuring range 0+20 to +140C, accuracy 3.0C -00 to +200C; measuring range 0+20 to +180C, accuracy 3.0C -00 to +250C; measuring range 0+30 to +220C, accuracy 4.0C +50 to +250C; measuring range 0+70 to +230C, accuracy 3.0C -00 to +300C; measuring range 0+30 to +270C, accuracy 6.0C +50 to +300C; measuring range 0+80 to +270C, accuracy 4.0C -00 to +350C; measuring range 0+50 to +300C, accuracy 6.0C +50 to +350C; measuring range 0+80 to +320C, accuracy 6.0C -00 to +400C; measuring range 0+50 to +350C, accuracy 6.0C -00 to +450C; measuring range 0+50 to +400C, accuracy 6.0C -00 to +500C; measuring range 0+50 to +450C, accuracy 8.0C -00 to +600C; measuring range +100 to +500C, accuracy 10.0C Capillary type (FL)1 none (with rigid connection) FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of range) Capillary length1 none (with rigid connection) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (details in plain text: in 1000 mm steps, up to 10000 mm length)
06.06/00327954
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details
Contact dial thermometer Class 1.5, Type 608523
Order code (6) 750 752 843 161 311 872 873 401 251 913 820 876 871 (7) 6 8 10 11 12 (8) 000 103 104 105 114 (9) 26 96 95 (10) 00 01 26 46 Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip TA 25; sliding clamp fitting on support tube2 SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; weld-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm 08 mm 10 mm 11 mm 12 mm Type of thread for process connection (PA)1 no thread (with TF 01 and TF 11) thread G3/8 thread G1/2 thread G3/4 thread M 10 x 1 (TA 23 and SH 11 only) Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) probe / brass (CuZn) support tube (above 250C) Material of process connection (PA)1 none (TF01 and TF11 only) steel (St) stainless steel (CrNi, 1.4571) brass (CuZn)
06.06/00327954
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
Contact dial thermometer Class 1.5, Type 608523
Order code (11) 0 050 100 150 200 ... (12) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 050 mm 100 mm 150 mm 200 mm special length (details in plain text in 50 mm steps) Switch output (SA)
28
SA 28
one contact
27
SA 27
two contacts
19
SA 19
Extra codes (TZ) no extra code peak-reading pointer microswitch 10 (3) A (230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) stop for min. or max. setpoint limit, factory-set customized scale special versions on request!
/ /
(3) ...
(4) .. 21
(6) ...
(7) .. 8
(8) ...
(9) .. 26
(12) .. 28
(13) ...
...
- 818 -
- 750 -
- 000 -
/ 0003
see Data Sheet 60.8730 for description and features screw-in spigot to DIN 3852 Form A List extra codes in sequence, separated by commas.
06.06/00327954
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
Contact Thermometer-TF
Transformer and industrial versions
Electromechanical temperature controller, with indication of actual value Class 1.5 IP54 protection One or two contacts; contact rating 5 or 10 A Housing size: 80mm dia.
Brief description
The contact thermometer-TF is a universally applicable instrument with indication of the actual value, for temperature measurement, control and monitoring. The temperature-dependent change in volume of a liquid-filled measuring system (or the temperature-dependent change of pressure in a gas-filled system) is converted into a rotary movement of the pointer by a Bourdon tube, without any intermediate gearing. The rotary movement of the pointer spindle operates the microswitch through a lever system.
Type 608540/1080
Technical data
Housing, bezel and protective cap Enclosure protection Window Scale Accuracy class liquid-filled Measuring system Time constant t0.632 Ambient temperature effect on housing on capillary (per meter) indication range (AB) 350C approx. 12 sec, measured in a water bath, with a 6 mm dia. copper probe plastic (PA 6), gray UV-stabilized IP54 to EN 60 529 PMMA (Plexiglas) white, black lettering Class 1.5 similar to EN 13 190 gas-filled indication range (AB) 400C approx. 4 sec, measured in an oil bath, with a 10 mm dia. stainless steel probe
in % of indication range (referred to the deviation from the reference value +23C) 0.15% of indication range per C change in ambient temperature 0.03% of indication range per C change in ambient temperature 0.05% of indication range per C change in ambient temperature no effect
higher ambient temperature higher temperature indication lower switching point standard Electrical contact Contact type Contact rating 5 (1.5) A Switching differential Switching point accuracy Switching reliability Electrical connection Setpoint adjustment Limit temperatures Nominal position (NL) approx. 1.5% of indication range extra code (TZ) 650
single-pole microswitch with a mechanically operated changeover contact 230V AC +10/-15%, 48 63Hz, p.f = 1 (0.6) 10 (3) A 1.5 to 3% of indication range
0.5% of indication range referred to the switch-off point with rising temperature To ensure maximum switching reliability, we recommend a minimum voltage of 24 V and a minimum current of 20 mA. screw terminals: for conductor cross-section up to 2.5 mm2, protected by cap with cable gland Suitable for cable diameters from 6.5 to 16 mm. with screwdriver, protected by cap. -30 to +70C (storage and transport -30 to +70C) NL90, symbol
04.07/00485270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
Dimensions
Type 608540/0280
G 1/2A G 3/4A G 1A G
27 32 27 a/f
14 16 16 L1
Type 608540/2280
Type 608540/2380
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
Order details:
Order code 608540 (1) (2) 1080 (3) 643 818 921 (4) 00 (5) 0 (6) 874 (7) 8 (8) 104 105 106 (9) 26 (10) 46 (11) 150 (12)
Transformer version Basic type Mechanical contact thermometer, transformer version Basic type extensions Style: 10; housing size: 80 mm dia. Indication range (AB) -20 to +120C; range 030 to +100C -00 to +120C; range 0+20 to +100C +20 to +120C; range0+38 to +104C Capillary type (FL)1 none (with rigid connection) Capillary length1 none (with rigid connection) Process connection (PA)1 TA 24; immersion tube with screw fitting, O ring seal and clamping screw Diameter of process connection (PA)1 08 mm dia. Thread for process connection (PA)1 G1/2 (1/2" pipe) thread G3/4 (3/4" pipe) thread G 1 (1" pipe) thread Material of probe / support tube1 stainless steel (CrNi 1.4571) Material of process connection (PA)1 brass (CuZn) Fitting length of process connection (PA)1 (dimension S) 150 mm Switching output (SA)
20
SA 20
one contact
21
SA 21
two contacts
/ /
(4) .. 00
(5) . 0
(7) . 8
(9) .. 26
(10) .. 46
(12) .. 20
/ /
(13) .. 0003
See data sheet 60.8730 for description and features. List extra codes in sequence, separated by commas.
04.07/00485270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
Order details:
Order code 608540 (1) (2) 1080
Industrial version Basic type Mechanical contact thermometer, industrial version Basic type extensions Style: 10; housing size: 80 mm dia.
0280
2280
2380 (3) 469 566 643 807 810 814 818 921 826 832 834 926 840 927 843 932 848 851 854 858 (4) 00 02 11 17 21 (5) 0 1000 2000 3000 4000 5000 ....
Style: 23; housing size: 80 mm dia. Indication range (AB) -40 to +040C; range 030 to +030C -30 to +050C; range 020 to +040C -20 to +120C; range 030 to +100C -00 to +060C; range 0+10 to +050C -00 to +080C; range 0+10 to +070C -00 to +100C; range 0+10 to +090C -00 to +120C; range 0+20 to +100C +20 to +120C; range0+38 to +104C -00 to +160C; range 0+20 to +140C -00 to +200C; range 0+20 to +180C -00 to +250C; range 0+30 to +220C +50 to +250C; range0+70 to +230C -00 to +300C; range 0+30 to +270C +50 to +300C; range0+80 to +270C -00 to +350C; range 0+50 to +300C +50 to +350C; range0+80 to +320C -00 to +400C; range 0+50 to +350C -00 to +450C; range 0+50 to +400C -00 to +500C; range 0+50 to +450C -00 to +600C; range +100 to +500C
accuracy 1.5C accuracy 1.5C accuracy 3.0C accuracy 1.5C accuracy 1.5C accuracy 1.5C accuracy 3.0C accuracy 3.0C accuracy 3.0C accuracy 3.0C 4 accuracy 4.0C 4 accuracy 3.0C 4 accuracy 6.0C 4 accuracy 4.0C 4 accuracy 6.0C 4 accuracy 6.0C 4 accuracy 6.0C 4 accuracy 6.0C 4 accuracy 8.0C 4 accuracy 10.0C 4
Capillary type (FL)1 none (with rigid connection) FL02 copper capillary with copper braiding, approx. 2.5 mm dia. (up to +300C top of indication range) FL11 copper capillary with PE sleeve, approx. 3.5 mm dia. (up to +120C top of indication range) FL17 stainless steel capillary, 1.5 mm dia. FL21 copper capillary, 1.0 mm dia. (up to +300C top of indication range) Capillary length1 none (with rigid connection) 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm special length (specify in plain text: in 1000 mm steps, maximum length: 10000 mm)
04.07/00485270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Order details:
Order code 750 752 843 161 847 311 872 873 401 874 913 (6)
Industrial version Process connection (PA)1 TF 01; temperature probe with stepped support tube TF 11; temperature probe without support tube TA 02; immersion tube with union nut and loose nipple2 TA 03; immersion tube with loose union nut TA 06; sliding clamp fitting on support tube2 TA 20; immersion tube with loose nipple and shoulder2 TA 21; immersion tube with loose plug and conical seal TA 22; immersion tube with loose plug, conical seal and loose nipple2 TA 23; immersion tube with plug and spring clip TA 24; immersion tube with screw fitting, O ring seal and clamping screw2. 5 SH 07; screw-in pocket, assembled, with clamping clip and fixing screw2 SH 09; (with TF 01)
1)
820 876 871 (7) 6 8 10 12 (8) 000 103 104 105 106 114
SH 09; weld-in pocket, assembled, with clamping clip and fixing screw SH 09; (not with FL21 - welding shoulder with steel 1.4515) (with TF 01) SH10; screw-in pocket, assembled2 SH11; screw-in pocket, assembled2 Diameter of process connection (PA)1 06 mm dia. 08 mm dia. 10 mm dia. 12 mm dia. Thread for process connection (PA)1 no thread (with TF 01 and TF 11) G3/8 (3/8" pipe) thread G1/2 (1/2" pipe) thread G3/4 (3/4" pipe) thread G1 (1" pipe) thread M 10 x 1 thread (with TA 23 and SH 11 only)
04.07/00485270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details:
Order code 26 96 95 00 26 46 (11) 0 100 150 200 ... (12) (9)
Industrial version Material of probe / support tube1 stainless steel (CrNi, 1.4571) copper (Cu) / brass (CuZn) (up to 200C) stainless steel (CrNi, 1.4571) probe / brass (CuZn) support tube (above 250C) Material of process connection (PA)1 none (TF01 and TF11 only) stainless steel (CrNi, 1.4571) brass (CuZn) Fitting length of process connection (PA)1 (dimension EL or S) minimum fitting length TF 11 (active probe dimension) 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Switching output (SA)
(10)
20
SA 20
one contact
21
SA 21
two contacts
22
SA 22
Extra codes (TZ) no extra code peak-reading pointer microswitch 10 (3) A ( 230 V AC/DC +10/-15%, 48 63 Hz, p.f. = 1 (0.6)) stop for upper or lower limit of setpoint adjustment, factory-set customized scale
/ /
(4) .. 02
(7) . 8
(9) .. 96
(10) .. 46
(12) .. 20
/ /
...
See data sheet 60.8730 for description and features. Screw-in spigot to DIN 3852 Form A. List extra codes in sequence, separated by commas. Not on styles 02 and 10. Material of probe / support tube: styles 02 and 10: stainless steel styles 22 and 23: brass
04.07/00485270
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/8
JUMO dTHERM-M
Digital indicator for panel or surface mounting with integrated 2-wire transmitter Stainless steel housing with bayonet lock IP65 protection Housing size: 100mm dia.
Brief description
The JUMO dTHERM-M features a 3-digit LC display with 13 mm digit height and an integrated 2-wire transmitter. The supply for the indicator is provided by wiring it in series into the 4 20 mA current loop, so that no additional cables are required. JUMO-dTHERM-M indicators are universal instruments, either for connection to external Pt100 resistance thermometers or with an integral Pt100, and are used for temperature measurement and indication.
Type 608624/1710
Technical data
Housing Measurement input Display Transfer characteristic Linearity error Calibration accuracy Indication accuracy Display format Supply Max. current drawn Supply voltage error Output signal Burden (Rb) Burden error Probe break/short-circuit Electrical connection housing and bezel or flange in stainless steel (1.4301) angle block in aluminium (Style 17) Pt100 resistance thermometer in 3-wire circuit (on Styles 20 and 23). A 2-wire circuit without lead compensation can be implemented via an external link between the terminals 4 and 5. 3-digit LCD with 13 mm digit height linear with temperature 0.2% of full scale 0.5% of full scale 0.2% of full scale 1 digit 1 C (0.1 C with extra code 465) 12 30 V DC approx. 30 mA 0.02% of span per volt (deviation from 24 V DC) 4 20 mA Rb (Ub-12 V) / 20 mA 0.02% of span per 100 burden current output < 2.5 mA, displayed value below start of range Style 01 connection for one cable Style 20, 23 connection for two cables with 3 to 5 mm dia. Style 10, 17 connection for one cable; terminal box to DIN 43650 (connector); gland for 6 to 8 mm cable diameter; conductor crosssection up to 1.5 mm2
connection with earth terminal; gland for 6.5 to 13 mm cable diameter; conductor cross-section up to 2.5 mm2
All input and output cables without connection to the mains supply must be arranged as twisted and screened cables. Ground the screen on the instrument side to the potential earth. Operating temperature range Storage temperature range Ambient temperature effect Display Current output EMC Interference emission Interference immunity Protection Time constant 0 to +60C (temperature at the housing) 0 to +60C referred to the deviation from the +23C reference value 0.2% / 10 C temperature change 0.1% / 10 C temperature change EN 61326 Class B to general requirements IP65 as per EN 60529 T0.632 approx. 19sec (measured in agitated water with a 10 mm dia. probe)
09.06/00347684
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/8
Connection diagram
Supply 12 30 V DC Current output 4 20 mA
or Resistance thermometer in 2-wire circuit via an external link on Styles 20 and 23 (note lead resistance)
PE conductor
Block diagram
Function
The transmitter converts the temperature-dependent change in resistance of a Pt100 resistance thermometer into a proportional DC current signal. The resistance thermometer (1) can be connected in 2- or 3-wire circuit. The amplifier stage (2) drives the output stage (5) which supplies the proportional 4 20mA DC current. On probe break or short-circuit, a comparator (3) is activated, which switches the output signal over to Low level. Solder links and potentiometers (4) are used for the range settings. The diode (6) serves as a reverse-polarity protection. The controller (7) provides the supply to the individual stages. The 4 20 mA current signal is digitized in the A/D converter (8) and displayed as a temperature value on the LCD (9).
Accessories
Power supply units Temperature probe to data sheet 70.7500 (1- or 4-way). On instruments with an external Pt100 resistance thermometer (Styles 20 and 23), temperature probes to data sheets 90.2105 and 90.2005 can be used.
09.06/00347684
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/8
Dimensions
Type: 608624/0110
101,5 50
dTHERM-M
49.5
74
L 90 S L5 18
Type: 608624/1010
101,5
47 37.5 50
dTHERM-M
99
~50
18 L5 17.5
Type: 608624/1710
101,5
47 37.5
50
dTHERM-M
51
18
18
99
18
09.06/00347684
99
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/8
Dimensions
Type: 608624/2010
132 116 40,5 50 18 14
80
90.5 66
101,5
13
dTHERM-M
84.2
3x120
99
31
4 .8
50 40,5 18 14
Type: 608624/2310
101,5
80
90.5
99
31
13
66
dTHERM-M 52
17.5
7.4
56
28
(1)
65
100
(2)
09.06/00347684
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/8
Description
*
16
010 TA01
* Housing connection
L13
Immersion tube with union nut and loose nipple; screw-in spigot1) 844 TA02
Immersion tube with sliding clamping thread; screw-in spigot1) 847 TA06
Immersion tube with loose nipple and shoulder; screw-in spigot1) 842 TA20
1) 2)
Screw-in spigot to DIN 3852 Form A Housing connection not applicable on Style 17
a/f 27 32
L1 14 16
L2 25 29
L3 10 11
L5 TA01 32
L5 TA02 67 71
L5 TA03 42 42
L5 TA20 50 50
a/f 27 32
L1 14 16
L2 25 29
L3 10 11
L13 TA02 43 47
L13 TA03 18 18
L13 TA04 18 18
L13 TA06 50 50
L13 TA20
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/8
Pockets (SH)
Pocket SH 1/2" NPT D (SH) d (TF) Dimensional drawing Description Versions Pipe thread G stainless steel 1.4571 m TA 03 m m TA 01 a/f m TA Material suitable for
CuZn3 m
12
10
14
10
14
10
913 X ~1 mm SH 07 a/f
10
14
10
14
10
Other pockets and threads on request available 1 screw-in spigot to DIN 3852 Form A
Please specify dimension EL when ordering! EL (standard lengths in mm) 50 63 80 100 150 200 300 1000 max.
09.06/00347684
steel m m m
"
1/ " 2
3/ " 4
3/ 8
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 7/8
Order details
Digital indicator, Type 608624
Order code 608624 (1) Basic type Digital indicator with integrated 2-wire transmitter Basic type extensions Style: 01; housing size: 100 mm dia.
(2) 0110
1010
1710
2010
2310 (3) 357 814 818 826 832 380 848 858 (4) 000 010 844 845 841 847 842 891 913 (5) 0 6 10 14
Style: 23; housing size: 100 mm dia. Range (MB) -50 to +050C -00 to +100C -00 to +120C -00 to +160C -00 to +200C -50 to +200C -00 to +400C -00 to +600C Process connection (PA)1 none (Styles 20 and 23) TA 01; immersion tube with shoulder TA 02; immersion tube with union nut and loose nipple1 TA 03; immersion tube with loose union nut TA 04; immersion tube with fixed hexagon screw-in spigot1 TA 06; immersion tube with sliding clamping thread1 TA 20; immersion tube with loose nipple and shoulder1 TA 20; (not for Style 17) SH 05; screw-in pocket, assembled1, 2 SH 07; screw-in pocket, assembled, SH 07; with clamping clip and fixing screw1, 2 Diameter of process connection (PA)1 none (Styles 20 and 23) 06 mm dia. (only with TA 02 and TA 03) 10 mm dia. 14 mm dia. (only SH 05 and SH 07)2
09.06/00347684
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 8/8
Order details
Digital indicator, Type 608624
Order code (6) 000 104 105 (7) 00 26 (8) 000 050 100 150 200 ... (9) 000 465 522 Thread for process connection (PA)1 no thread (on TA 01, Style 20 and Style 23) G1/2 thread G3/4 thread Material of process connection (PA)1 none (Style 20 and Style 23) stainless steel (CrNi, 1.4571) Fitting length of process connection (PA)1 (dimension S) none (Style 20 and Style 23) 050 mm 100 mm 150 mm 200 mm special length (specify in plain text, in 50 mm steps) Extra codes (TZ) no extra code display format 0.1 C/digit (up to 160C) customized front panel Special versions on request!
/ /
(3) ...
(4) ...
(5) .. 10
(6) ...
(7) .. 26
(8) ...
(9) ...
, ...
- 818 - 845 -
- 104 -
- 100
/ 0003
Screw-in spigot to DIN 3852 Form A. See Data Sheet 60.8730 for description and features. List extra codes in sequence, separated by commas.
09.06/00347684
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/6
750 TF 01
85 45 85 45 -
70 40 70 40 -
60 35 60 35 -
55 30 55 30 -
45 25 45 25 -
40 25 -
35 20 -
752 TF 11
6 8 6 8 10
85 45 85 45 -
70 40 70 40 -
60 35 60 35 -
55 30 55 30 -
45 25 45 25 -
40 25 -
35 20 -
753 TF 05
Temperature CrNi probe with (st. steel) plain support tube CuZn (brass) St (steel) CrNi (st. steel)
6 8 10 10 10 6
6082 . . 6084 . . 6085 . . 608001/01-... 608001/18-... 608001/01-... 608001/18-... 608002/01-... 608003/01-... 608002/18-... 608003/10-... 608001/01-... 608002/01-... 608003/01-... 608001/18-... 608002/18-... 608003/18-...
85 45 45 80 45 80 70 70 45
70 40 40 80 40 80 60 60 40
60 35 65 65 65 65 55 55 65
55 30 50 50 50 50 50 50 50
45 40 25 25 45 45 45 70 45 70 45 100 45 100 45 70
35 20 55 55 75 75 55
10
120 120
80
80
65
50
45
70
55
55
45
05.07 / 00073325
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/6
St (steel)
G 3/8
G 1/2
608001/0150-... 608001/0163-... 608001/0180-... 608001/0110-... 608001/0116-... 608001/18... 608001/... 608002/... 608003/... 608624/...
up to 200C
G 3/4
843 Immersion (844) tube with TA 02 union nut and loose nipple1
608001/... a/f
608624/...
6082... 6084... 6085.. 161 Immersion (845) tube TA 03 with loose union nut 608001/...
L1=14 L2=25 L13=44.5 a/f=27 L1=14 L2=25 L13=44.5 a/f=27 L1=14 L2=25 L13=44.5 a/f=27 L1=12 L1=14 L2=23 L2=25 a/f=22 a/f=27 L3=10 L13=18 a/f=27 L3=10 L13=18 a/f=27 L3=10 L13=18 a/f=27 L3=7.5 L3=10 a/f=22 a/f=27
L1=16 L2=29 L13=48.5 a/f=32 L1=16 L2=29 L13=48.5 a/f=32 L1=16 L2=29 L13=48.5 a/f=32 L1=16 L2=29 a/f=32 L3=11 L13=18 a/f=32 L3=11 L13=18 a/f=32 L3=11 L13=18 a/f=32 L3=11 a/f=32
TF 05
TF 01
a/f
608002/... 608003/...
TF 05
TF 01
05.07 / 00073325
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/6
St (steel)
G 3/8
G 1/2
a/f
608001/...
L1=12 L1=14 L1=16 L13=14 L13=14 L13=14 a/f=22 a/f=27 a/f=32 L1=12 L1=14 L1=16 L13=17 L13=18 L13=18 a/f=22 a/f=27 a/f=32 L1=14 L1=16 L13=18 L13=18 a/f=27 a/f=32 L1=12 L1=14 L1=16 a/f=22 a/f=27 a/f=32 L1=12 L13=60 a/f=22 L1=12 L13=60 a/f=22 L1=14 L13=60 a/f=27 L1=14 L13=60 a/f=27 L1=14 L13=60 a/f=27 L1=12 L1=14 a/f=22 a/f=27 L1=12 L1=14 a/f=22 a/f=27 L1=16 L13=60 a/f=32 L1=16 L13=60 a/f=32 L1=16 L13=60 a/f=32 L1=16 a/f=32 L1=16 a/f=32
G 3/4
TF 05 L1=20 L13=18 a/f=27 L1=20 L13=18 a/f=27 L1=20 L13=18 a/f=27 TF 01 L1=20 L13=18 a/f=27 TF 05
608002/... 608003/...
a/f
608225/... 608425/... 608201/... 608202/... 6085... 018 Immersion TA 08 tube with sliding fixing plate in zincplated steel and fixing screw * adjustment range 311 Immersion (842) tube TA 20 with loose nipple and shoulder1 a/f 608201/... 608202/... 6085... 608624/... 608001/... 608002/... 608003/...
TF 01 TF 05
TF 01
TF 05
05.07 / 00073325
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/6
St (steel)
G 3/8
G 1/2
872 Immersion (403) tube TA 21 with loose plug and conical seal 873 Immersion (351) tube with TA 22 loose plug, conical seal and loose nipple1 401 Immersion TA 23 tube with plug and spring clip Smin = L + 8mm 874 Immersion TA 24 tube with screw fitting, O ring seal and clamping screw1
G 3/4
TF 01
a/f
TF 05
a/f 848 Sliding TA 25 clamp fitting on capillary1 608201/... a/f 17 a/f 608202/... only with FL 17 and FL 21 up to 250C TF 11 L1=12 L1=14 a/f=22 a/f=27
05.07 / 00073325
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/6
Pockets (SH)
Type Description Dimensional drawing dia. D (SH) dia. d (TF) Material CuZn (brass) Screw fitting Pipe thread G 1/2-14NPT L1=20 L2=25 a/f=27 L1=12 a/f=22 L1=12 a/f=22 L1=12 a/f=22 L1=14 a/f=27 L1=14 a/f=27 L1=14 a/f=27 L1=14 a/f=27 L1=16 a/f=32 L1=16 a/f=32 L1=16 a/f=32 L1=16 L1=20 a/f=32 a/f=27 TA 01 TF 01 TF 11 CrNi (st. steel) Suitable for
St (steel)
G 3/8
G 1/2
858 Screw-in SH 04 pocket, machined from solid, to DIN 43772 T2-Form 91. Steel: Mat.Ref. 1.5415 891 Screw-in SH 05 pocket, assembled1
G 3/4
a/f 12 10
14
10
TA 03
14
10
a/f
10
12
10
14 820 Weld-in SH 09 pocket, assembled, with fixing screw. Welding shoulder for steel, Mat.Ref. 1.5415. 876 Screw-in SH 10 pocket, assembled1 a/f
10
8 10
6 8
TA 01 TF 01 TF 11
14
10
TA 21
TA 23
05.07 / 00073325
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13031, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 6/6
Order details
Pockets for dial thermometers, type 608730 Order code 608730 858 891 913 (1) Basic type Pockets for dial thermometers
(2)
820
876 871
SH 10 Screw-in pocket, assembled; Screw-in spigot to DIN 3852 Form A. SH 11 Screw-in pocket, assembled; Screw-in spigot to DIN 3852 Form A.
(3)
08 10 12 14 17
External diameter D
08 mm 10 mm 12 mm 14 mm 17 mm
(4)
46 01 26
Material
brass (CuZn) steel (St) stainless steel (CrNi)
(5)
000 103 105 104 144 114
Thread G
none (SH 09 only) G 3/8 (3/8" pipe) G 3/4 (3/4" pipe) G 1/2 (1/2" pipe) 1/2-14NPT M 10 x 1 (SH 11 only)
(6)
000 10,3 16.3
(7)
050 063 080 100 130 150 200 250 300 ...
Fitting length EL
050 mm 063 mm 080 mm 100 mm 130 mm 150 mm 200 mm 250 mm 300 mm special length (details in plain text, in 50 mm steps)
(2) /
... -
(3)
.. -
(4)
.. -
(5)
... -
(6)
... -
(7)
...
Order example
608730 05.07 / 00073325 / 891 14 26 104 000 150
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 1/5
Timers
with mechanical drive or synchronous motor with acoustic signal and two contacts housing size: 60 mm dia. bezel sizes: 72 x 72 mm and 96 x 96 mm
Brief description
Timers with mechanical drive and acoustic signal (switch function 00) Turning the selector knob winds up the clockwork mechanism. At the end of the pre-set time, there is an acoustic signal. Timer with mechanical drive and two changeover contacts (switch function 26) Turning the selector knob winds up the clockwork mechanism. At the end of the pre-set time, electrical equipment and installations can be switched on/off or over. In addition, acoustic or optical signals can be operated through a contact. After the set time has elapsed, contacts I and II change over and, at the same time, the selector knob returns to its start position. Timer with sychronous motor and two contacts (switch function 24 and 25) Turning the selector knob will switch on the synchronous motor of the timer and pre-select the time. During the set time, or after it has elapsed, electrical equipment and installations can be switched on/off or over. In addition, acoustic or optical signals can be operated through a contact. Switch function 24 After the set time has elapsed, contacts I and III change over (contact II opens). Contacts I and III must be returned manually to the start position, by turning the selector knob from 0 to Off (contact II remains open). Switch function 25 90 sec before the end of the pre-set time, contact II will be closed for approx. 90 sec. After the set time has elapsed, contacts I and II are opened (automatic signal switch-off for contact II).
Type 608901/5172
Type 608901/5272
Type 608901/5460
10.07/00423857
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 2/5
Technical data
Basic type extension 5172 and 5196 Housing Housing mounting Scale Timer setting Basic type extension 5272 and 5296 black plastic from the back, with bracket white, black lettering By selector knob on the front window. Minimum setting angle 30. Very short times can be selected by moving the knob beyond the desired setting and then turning it back again. Timer setting by: black knob with plastic flange black knob with aluminium disc in center by arrow on flange by pointer housing size 72 x 72 mm: plastic sheet steel, zinc-plated housing size 96 x 96 mm: sheet steel, zinc-plated stainless steel, electro-polished, plastic for front mounting faston connector A 6.3 x 0.8 to DIN 46244 16 (4) A, 230V AC +10/-15%, 48 63Hz, p.f. = 1 (0.6) 10 (2) A, 380V AC +10/-15%, 48 63Hz, p.f. = 1 (0.6) 230V AC, 50 Hz Permissible ambient temperature -20 to +80C unrestricted Switch function 00 270 60 min 0.5 Switch function 24 300 + 30 2.0 Switch function 25 300 Switch function 26 276 3.0 -Basic type extension 5460 -front
Time marking Baseplate Bezel Electrical contact connection rating operating voltage of synchronous motor Limit temperatures Nominal position (NL) Scale span Deviation (minutes)
Dimensions
Type: 608901/5172-00
8 14.5 72
57
72
24 29
Type: 608901/5196-00
8 14.5 96
57
96
24 29
10.07/00423857
28
28
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 3/5
Dimensions
Type: 608901/5172-26
TZ 572 (signal lamp)
8 72
faston connector A 6.3 x 0.8 DIN 46244
14.5
24 38
Type: 608901/5196-26
TZ 572 (signal lamp)
96
8 14.5
24 38
8 14.5
72
24 T*
faston connector 8 A 6.3 x 0.8 DIN 46244
14.5
96
24 T*
28
28
72
28
96
28
72
T (mm) 56 45
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 4/5
Dimensions
Type: 608901/5272-24 Typ: 608901/5272-25
TZ 572 (signal lamp) faston connector A 6.3 x 0.8 DIN 46244
8 12
72
22 T*
96
22
T*
28
96
28
72
T (mm) 56 45
3x
120
60
28
66
75
32
8 19
10.07/00423857
85
JUMO GmbH & Co. KG Delivery address:Mackenrodtstrae 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM 20 2TT, UK Phone: +44 1279 635533 Fax: +44 1279 635262 e-mail: sales@jumo.co.uk Internet: www.jumo.co.uk
JUMO Process Control, Inc. 8 Technology Boulevard Canastota, NY 13032, USA Phone: 315-697-JUMO 1-800-554-JUMO Fax: 315-697-5867 e-mail: info@jumo.us Internet: www.jumo.us
Page 5/5
Preis EUR
24
Cont. II
Contact I
Cont. I
Cont. III
1c
1b 3a 3c L1
3b
2b
2a
3 N
with TZ 572
PE
Contact II Contact I
On Off On Off
ON time 90sec
25
Running time
Cont. Cont.
2b
1a
1b
with TZ 572
26
Running time 60 minutes Extra codes no extra code metal bezel, black (not on style 54) metal bezel signal lamp (not on style 54; not with switch function 00) black scale, white lettering scale to customer specification gray knob (style 51 only)
(2) ....
(3) ..
(4) ..
/ /
...
Order example 608901 / 5196 25 60 1 List extra codes in sequence, separated by commas. 10.07/00423857