Documente Academic
Documente Profesional
Documente Cultură
www.fordrotunda.com
SERVICES
Rotunda Advantages...............................................................................................................................................................II Important Information............................................................................................................................................................ III Facility Planning....................................................................................................................................................................IV Dealership Supplies................................................................................................................................................................V Technician Tool Program........................................................................................................................................................VI
PRODUCTS
Section 1 Brake Service......................................................................................................................................... 1-1 1-6 Section 2 Climate Control Service.......................................................................................................................... 2-1 2-6 Section 3 Collision Renishing................................................................................................................................ 3-1 3-2 Section 4 Collision Repair.................................................................................................................................... 4-1 4-14 Section 5 Facility................................................................................................................................................... 5-1 5-2 Section 6 Fluid Handling....................................................................................................................................... 6-1 6-8 Section 7 General Shop Equipment...................................................................................................................... 7-1 7-24 Section 8 Lifting Equipment.................................................................................................................................. 8-1 8-20 Section 9 Parts Storage.......................................................................................................................................... 9-1 9-4 Section 10 Powertrain Service............................................................................................................................ 10-1 10-4 Section 11 Shop Furniture.................................................................................................................................. 11-1 11-8 Section 12 Starting and Charging Systems........................................................................................................... 12-1 12-4 Section 13 Vehicle Detailing.............................................................................................................................. 13-1 13-4 Section 14 Vehicle Diagnostics......................................................................................................................... 14-1 14-10 Section 15 Wheel Service................................................................................................................................ 15-1 15-14 Section 16 Appendix....................................................................................................................................... 16-1 16-98 Section 17 Index............................................................................................................................................... 17-1 17-6
Prices are subject to change. See the website for most current information.
1-800-ROTUNDA
www.fordrotunda.com
Rotunda is the service equipment and tool specialist for Ford Motor Company dealerships. Rotunda has developed an expertise in addressing Ford Family dealership equipment needs and offers a full line of service and business products that assure Ford, Lincoln and Mercury vehicles can be serviced properly on the rst visit.
ProGrAM BeNeFits
Buying Power/Pricing Through our global dealership representation, we provide buying power that translates into competitive pricing and leverage. Dealership Voice Rotunda works with Dealer and Technician councils and committees to address equipment concerns and needs. Ease of Buying Rotunda offers one-stop shopping, no need to deal with hoards of suppliers and distributors. Purchases can be billed right to your P&A account. No credit applications to ll out, no checks to write. Environmentally Compatible Rotunda uses Fords Environmental Quality Ofce to assure that products offered are environmentally compatible. Experience Rotunda has over 48 years of experience in doing business with Ford dealers. Financing Options When investing in service equipment, nancing options are an important consideration. Rotunda offers several different nancing options to meet your individual purchasing needs. Ford Backing Rotunda stands behind the equipment that a dealer purchases. We assure that the purchase is delivered and installed with proper training provided. If it isnt right, Rotunda will make it right. Ford Engineering Approved Rotunda works closely with all Ford Motor Company engineering activities to ensure that Ford Motor Company vehicles are not damaged nor is their serviceability compromised by the service equipment. Hands-On Product Testing All items in the Rotunda Program have been tested for functionality, repeatability and accuracy. Our evaluations often serve as standards for the service industry. Heavy-Duty Equipment Look for this symbol when you need Heavy-Duty equipment to service your largest models. Industry Liaison Rotunda provides a focal point for Ford Motor Company vehicle specications to the service equipment industry through AAMA, MACS, SAE, NACE, AAPEX and ETI. Premier Suppliers Acceptance into the Rotunda Program is a cherished Seal of Approval. When a product is accepted, the supplier has met the Program requirements for nancial stability, training/installation capabilities and service networks. Safety/Compliance Rotunda assures that the products offered are safe to operate and comply with applicable safety standards and codes (UL, ALI/ETL, OSHA, etc.) Technology Leader Rotunda products are at the leading edge of technology, and we have many rsts to our credit.
II
1-800-ROTUNDA
www.fordrotunda.com
THE ROTUNDA GeNerAL service EQUIPMENT PROGRAM OFFERS MANY ADVANTAGES WHICH MAY NOT BE DUPLICATED BY LOCAL SOURCES:
Ford Approved Equipment Special Financing Opportunities One-Year Minimum Parts/Labor Warranty Installation/Training Assistance Facility Planning Assistance Convenient Parts Account Billing One-Stop Shopping Comprehensive Equipment Offerings Ford Motor Company Backing Unlike local equipment distributors who quote every deal differently, we publish our prices. The Rotunda General Service Equipment Program is condent in providing you all the full-service advantages of buying through the Program at the best possible prices available. Whether its a single piece of equipment or a complete service department, parts department, body shop or Quick Lane facility, were here to help. Call us for equipment consultation, technical information or to place an order.
1-800-ROTUNDA (768-8632)
Press 1 for Diagnostics Press 2 for General Service Equipment Press 3 for Rotunda Dealership Supplies Press 5 for Special Service Tools Press 6 for Technician Tool Program To repeat this menu press 7
The Rotunda Program does not sell equipment for resale. All sales transactions will include the appropriate taxes as determined by the state of dealer location.
III
1-800-ROTUNDA
www.fordrotunda.com
Freight Terms Actual freight charges will be charged to the dealer parts account unless indicated. Unloading Requirements Whenever possible, Rotunda makes every effort to ensure that large equipment items are delivered on trucks equipped with liftgates to facilitate unloading. Please be aware that sometimes this option isnt available due to local delivery restrictions and you may need to provide the necessary unloading devices (forklift, tow truck, etc.). Transit Damage If damaged in transit, the shipment should be accepted and a claim led with the carrier for the damaged portion. To minimize downtime for your facility, please notify Rotunda as soon as possible so that any replacement equipment can be expedited. Returns If you need to return an equipment item purchased from Rotunda, the following guidelines will help ensure smooth processing: Call 1-800-ROTUNDA (Option #2) for return authorization. Equipment must be unused, in the original carton and contain all the parts. Rotunda will pass through any supplier restocking charges and apply them to your credit. Custom or closeout products are not eligible for return.
PHoNe 1-800-ROTUNDA optioN #2 or visit WWW.FORDROTUNDA.COM (GSE) For ROTUNDA FACILITY PLANNING
A poorly designed xed operations department will cost 5% to 10% in additional, unnecessary and avoidable construction expense, as well as burden the operation with prot draining inefciencies for years to come.
FACT
Allow ROTUNDA FACILITY PLANNING to consult with your architect. Our experts will assist in the development of construction documents. Armed with years of specic knowledge and experience in xed operations, we WILL help minimize and/or eliminate unnecessary construction costs and change orders by working with your architectural rm on all of the equipment specications and MEPs.
SOLUTION
Provide comprehensive facility evaluation with Dealer and fixed operations personnel to determine the requirements for your facility. Define vehicle flow for added operational efficiency. Supply full-size shop layout for last minute changes. Review all fixed operations equipment and systems required for your facility and provide recommendations. Coordinate reflected ceiling print with architect to provide best possible location for overhead systems. Transmit electronic CAD print to architect upon final approval of Dealer. Furnish cut-sheets to architect for all systems ordered.
Ask about Equipment Payment Deferments and Financing provided through ROTUNDA Contact Rotunda GSE Customer Care at 1-800-ROTUNDA option #2
IV
1-800-ROTUNDA
www.fordrotunda.com
Rotunda offers a complete line of high quality Ford approved dealership supplies with convenient P&A code billing to help you satisfy your customers. Items like: Consumables Protective Seat Covers Service Dispatch Numbers Protective Floor Mats Disposable Key Tags
Shop Supplies Wheel Weights Leak Detection Lights and Dyes NVH Squeak & Rattle Kits
Key Blanks Replacement keys for all Ford, Lincoln and Mercury cars and trucks, including IPATS technology keys and integrated keys
1-800-ROTUNDA
www.fordrotunda.com
Visit our website LiNk oN tHe PTS web pAGe or cALL 1-800-ROTUNDA, OptioN #6.
VI
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED BY: VACulA AuTOMOTive PROduCTs
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
261-00002
SpeCiFiCATiONs:
Brake into the future...the state-of-the-art DrainTwin Pressure Brake Bleeder/Flusher. The Vacula DrainTwin is a pressure/ vacuum brake bleeding and ushing system. This two-in-one tool uses the latest cutting edge technology. The revolutionary pulsing/ diaphragm pneumatic pump and state-of-the-art drip-free couplers make this equipment one of the safest and most efcient ways of bleeding or ushing todays complex braking systems. Vehicles such as the Escape and Mariner Hybrids are equipped with electrical hydraulic brakes that can only be bled using a pressure bleeder capable of maintaining a constant 35 p.s.i. pressure. Because the Escape and Mariner Hybrids are a pressure bleed only, this is the bleeder recommended by Ford Engineering. This equipment is loaded with features that can handle any job safely and professionally.
Air inlet pressure: 50 230 p.s.i. (3.5 16 bar) Working pressure: 0 42 p.s.i., 3 p.s.i. (0 2.9 bar, .2 bar) Maximum vacuum suction: 25" of mercury (85% vacuum) Length of hose: 11.5' (3.5 m) Connection: 1/2" NPT Works on ESP/ABS system/pulsatory pressure.
LIFTING EQUIPMENT
iTeMs:
PARTS STORAGE
ACCessORies:
261-00003 261-00004 261-00005 261-00006
FeATuRes:
Ford, 3-tab cap Ford, 2-tab cap Retrofit hose to fit other brand adapters Universal adapter, foreign and domestic round 9/16 -2.75 261-00007 All Ford, screw-type cap 46.5 x 3.5 mm 261-00016 All Ford, 3-tab cap, 2009 to present models
POWERTRAIN SERVICE
Fill/Suction gun for use in master cylinder reservoir convenient removal of uid in vacuum mode and topping off in pressure mode. Enjoy the versatility of either pressure or vacuum brake bleeding of the brake system with the ip of a switch. Extra long fluid hose for use while vehicle is on a lift. Heavy-duty, high quality Vacula construction. Security float on fluid supply. Built-in storage compartments. Runs entirely on compressed air. Adjustable pressure (up to 42 p.s.i./2.9 bar). Works on the new hydraulic brake system, yet still services the traditional hydraulic brake and clutch system. Easily expands your new or used fluid containers from 1 16 gallons. Promotes a clean, environmentally safe repair facility. New state-of-the-art drip-free coupler for safe fluid handling.
AlsO AvAilAble:
SHOP FURNITURE
Adapters allow you to use the DrainTwin to bleed hydraulic clutches by reversing the process and bleeding from the clutch reservoir. Can also be used as an automatic brake uid reller when vacuum bleeding brake systems. 261-00009 Chrysler 3-tab cap and 2-cap system. 261-00010 GM 3-tab cap. 261-00011 GM/Chrysler SUV 2-step master reservoir.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
1-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: pRO-CuT iNTeRNATiONAl
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
Pro-Cut On-Car Lathes: Turning Rotors into Prots. The PFM 9.2 comes complete with speed lock cutting head and allows the technician to save up to a minute more off the already incredibly fast process time of Pro-Cut PFM lathes by eliminating the need for hand tools during setup. Sound easy? You bet! In as little as 7 minutes per rotor, your technicians will be matching and renishing rotors with the highest degree of accuracy available. Call for a demo today.
One-Stop Shopping FOR ALL YOUR SERVICE department equipment NEEDS ford Engineering Approved equipment industry leading equipment suppliers Convenient parts ACCOUNT BILLING installation & training ASSISTANCE
POWERTRAIN SERVICE
FeATuRes:
SHOP FURNITURE
Featuring all new DRO! (Live Digital Run Out). Self-timing feature helps manage cutting bit use and track ROI. Speed-Lock cutting head system with exclusive zero hand tool lathe setup. TDS (Tuned Dampening System) eliminates the need for interrupted and/or variable speed cut systems. Premium HD Disk Lock trolley design offers smooth operation and positive locking during cut cycle. Adapters available for all cars and medium-duty trucks, including 1-ton! Setup and installation included with purchase.
ITeMs:
DRO-5 adapters 201-00070 PMF 9.2F On-car brake lathe package with DRO-2 adapters
AlsO AvAilAble:
VEHICLE DIAGNOSTICS
NOTE: Warranty and policy manual requires using a Pro-Cut OCL during Bumper-to-Bumper warranty coverage.
WHEEL SERVICE
1-2
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
85,110, 175 .002 .014" .002 .014" 100, 200 .002 .010" .002 .020"
COLLISION REFINISHING
Bench lathes are offered through the Rotunda program specifically for drum applications and other non-Ford applications. The only Ford approved method of turning car and light truck brake rotors is using a Ford approved on-car brake lathe. Consult Warranty and Policy Manual for more information.
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
1-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: HuNTeR eNgiNeeRiNg CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
006-02778 with 006-02782 HunterPro Level IV adapter kit and 006-02598 optional storage drawer
LIFTING EQUIPMENT
ITeMs:
006-02775 Combination brake lathe with HunterPro 006-02776 006-03187 006-02777 006-02778 006-03186
POWERTRAIN SERVICE
The HunterPro BL505 brake lathe features a unique design that allows the operator to change the setup from rotors to drums and vice versa with unprecedented ease and speed. The HunterPro package includes HunterPro accessories and a choice of HunterPro adapter kits to customize the lathe to match the service prole of your shop.
accessories 006-02775 with bench, backboard and chip tray 006-02776 with dust containment system 006-02775 with Digi-Cal Auto Measurement 006-02776 with Digi-Cal Auto Measurement 006-03187 with Digi-Cal Auto Measurement
FeATuRes:
AdApTeR KiTs:
SHOP FURNITURE
VEHICLE DETAILING
An infinitely adjustable feed rate provides a dial-in fast rate for rapid material removal, very slow for final surface finish or any rate in between to perform one-cut passes. (3) easy-to-access spindle speeds allow the correct speed for all size workpieces. No tools are required to change speeds. The disc/drum control lockout and warning indicator light eliminates potential crashing of the machine in drum or disc modes. Optional Digi-Cal Auto Measurement instantly measures drum or rotor dimensions to determine if the workpiece should be discarded prior to machining. The optional Dust Containment System captures chips and iron dust particles that can become airborne when servicing rotors and drums. The system also provides the added benets of greater safety and reduced shop noise.
Complete the HunterPro package with your choice of adapter kit to customize the lathe to match the service profile of your shop. 006-02779 HunterPro Level I hubbed and hubless adapters covering most passenger car rotors, drums and flywheels, including composites 006-02780 HunterPro Level II hubbed and hubless adapters covering most passenger car and light-duty truck rotors, drums and flywheels through 1/2-ton chassis, including composites 006-02781 QuickChuck Level III hubbed and hubless adapters and three-jaw chuck mounting system covering most passenger car and light-duty and larger light-duty truck rotors, drums and flywheels 006-02782 HunterPro Level IV hubbed and hubless adapters covering most passenger car and light-duty and larger light-duty truck rotors, drums and flywheels, including composites
VEHICLE DIAGNOSTICS
Hunter has additional brake lathes available. Brake lathe accessory needs can be addressed by contacting 1-800-ROTUNDA option #2.
WHEEL SERVICE
1-4
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: AMMCO
www.fordrotunda.com
Massive spindle, supported on wide centers by oil-fed bronze journal bearings, dampens vibration and contributes to legendary service life. Variable spindle speed and feed rates for optimum surface nish on diverse applications. Translating spindle for drum machining also provides faster rotor setup by quickly positioning rotor horizontally. Large diameter, tubular cross-slide, on wide centers, for maximum vibration dampening and minimal service requirements. Double tapered arbor gives maximum support and quick change to optional arbors if desired. Fast change over from rotors to drums. Motor enclosed in mainframe for maximum service life. A wealth of optional accessories makes it easy to customize to meet any shops needs. Can be equipped to machine some flywheels. Must be ordered with either an A or B adapter set.
COLLISION REPAIR
104-00508
FACILITY
ITeMs:
104-00508 shown with optional 104-00705 tool board and light canopy, optional adapters, optional 104-00706 side storage cabinet and optional 104-00707 lathe toolbox bench.
FLUID HANDLING
Combination brake lathe Medium-duty brake lathe for drums and rotors 4000B-SP brake lathe 4000E brake lathe
OpTiONs:
LIFTING EQUIPMENT
104-00502 Backless bench. 104-00029 Bench with back. 104-00165 Basic adapter set A includes 104-00620 and
104-00629 spacers. 104-00166 Adapter set passenger car through 1/2-ton truck B includes 104-00620 and 104-00629 spacers.
PARTS STORAGE
104-00796 shown with optional 104-00029 bench with back and optional adapters.
POWERTRAIN SERVICE
SHOP FURNITURE
ITeMs:
104-00707
Brake lathe toolbox bench Tool board and light canopy. Side storage cabinet.
OpTiONs:
104-00705 104-00706
VEHICLE DETAILING
104-00790 shown with optional 104-00707 lathe toolbox bench and optional adapters.
VEHICLE DIAGNOSTICS
1-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: AMMCO
www.fordrotunda.com
COLLISION REFINISHING
104-00797
COLLISION REPAIR
104-00814
FACILITY
FLUID HANDLING
ITeMs:
104-00814
ITeMs:
104-00797
1-800-ROTUNDA OPTION #3
LIFTING EQUIPMENT
The new 1/2 3/4 ton 4 x 2 truck rotor adapter is your mounting solution for the 1/2 to 3/4 ton Ford pickup model F-150 rotor.
PARTS STORAGE
ITEMS:
104-00802
POWERTRAIN SERVICE
104-00802
104-00165 x x x x
104-00166 x x x x
104-00797 x x x x x
104-00806 x x x x x x x x x x
Spacer Self-aligning spacer Adaptek hubless auto Adaptek hubless auto and truck Dual taper adapter set truck Double chuck set with Tacoma plate Cross feed extension Clip-on silencer
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
1-6
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
Combines simple operation with superior accuracy. It recovers, recycles, evacuates, leak tests and recharges R-134a quickly and accurately. Fully automatic function lets you recover, vacuum, leak test, charge and then walk away. Meets SAE J-2788 standards for accuracy: 95% refrigerant recovery and charging to 1/2 oz.
COLLISION REPAIR
FEATUREs:
Automatic function with this new option, you can program the unit to recover, vacuum, leak test, charge and then walk away without having to operate panel valves. Vacuum leak test will monitor the vacuum level after an evacuation and inform the technician of a possible leak in the vehicles A/C system. Automatic refrigerant refill with this latest advance, you never have to stop in the middle of a job to change refrigerant tanks. The unit maintains a user selectable amount of refrigerant in an internal vessel and signals when it is time to change the supply tank so no monitoring is required. Refrigerant management system new and improved system displays refrigerant use and monitors remaining filter life. Prompts appear when 1/3 of filter life remains.
FACILITY
FLUID HANDLING
ITEms:
300-ROB34788
300-ROB34788
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
300-ROBTIFZX
023-00186
STARTING & CHARGING SYSTEMS
VEHICLE DETAILING
ITEMS:
300-ROBTIFZX
WARRANTY: 25-year.
VEHICLE DIAGNOSTICS
ITEms:
023-00186
2-1
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: FLO-DYNAmICs
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
Provides vehicle A/C service data and also provides machine service history
FLUID HANDLING
LIFTING EQUIPMENT
199-00067
PARTS STORAGE
199-00072
FEATUREs:
SHOP FURNITURE
Fast, efficient refrigerant recovery and recycling. 1 lb. per minute refrigerant transfer. Fully automatic or assisted operation. Large display provides menu-driven operation and services status multilingual readout. NEW automated Intell-a-Purge air-purge system. Great mobility and locking front wheels. Design certified for compliance with SAE J-2788. 4 c.f.m. vacuum pump. 50 lb. heated tank.
ITEms:
199-00072
ITEms:
fill injection
VEHICLE DETAILING
ACCEssORIEs:
199-00072 A/C Flush Kit 199-00069 Automatic Dye Injector Kit (for 199-00067 unit
VEHICLE DIAGNOSTICS
only)
2-2
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: CLIPLIgHT mANUfACTURINg
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
219-00024
219-00074
LIFTING EQUIPMENT
PARTS STORAGE
ACCEssORIEs:
Flushworks restores the heat transfer performance of A/C components to their original specifications. Operated by shop air, the pulsating scrubbing action eliminates foreign particulate matter and contaminants due to compressor or desiccant failure as well as residue from overheated refrigerant oil, keeping all A/C components clean and dry.
Fulfills the requirements as set out in the Ford Workshop Service Manual. Prevents costly repeat repairs due to system contamination. Leaves technician free to perform other tasks while flushing and purging is taking place. Uses Ford approved flush solvent (Motorcraft Part #YN-23). Order at your parts counter.
FEATUREs:
Test Kit for domestic and (most) imports. Packaged in a handy storage case. May be purchased on its own as a Universal Component Vacuum Test Kit 219-00025 Replacement Air Filter Pack. Includes (4) activated charcoal air filter elements and (1) coalescing air dryer element. Services about (100) vehicles 219-00074 2006 current A/C Flusher Adapter Kit. Includes fittings to service late model applications 219-00075 2006 current Accessory Replacement Kit. Includes quick connect adapters with O rings
SHOP FURNITURE
ALsO AVAILABLE:
219-00071
VEHICLE DETAILING
7 UV LED Cordless/rechargeable light with NiMH battery, wall/cigarette adapters and low battery indicator.
VEHICLE DIAGNOSTICS
2-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: AIRsEPT
www.fordrotunda.com
COLLISION REFINISHING
The only Ford-approved long-term A/C odor remedy. The Rotunda flexible applicator tool atomizes Motorcraft A/C Cooling Coil Coating to the proper droplet size to give excellent reach and even coverage.
COLLISION REPAIR
FEATUREs:
FACILITY
Infinitely flexible applicator. Proprietary anti-siphon design. Works with other sprayable liquids too! Unique flexible wand. Precision atomizing tip. Universal pickup tube. NPT blowgun.
258-00005
FLUID HANDLING
ITEms:
NOTE: To order Motorcraft A/C Cooling Coil Coating, order part #YN-29 at your parts counter. For more information please reference the appropriate vehicle A/C Odor Treatment in Workshop Manual Section.
LIFTING EQUIPMENT
YN-29
SUPPLIED BY: TECHNO TOOLs CORPORATION
PARTS STORAGE
POWERTRAIN SERVICE
Techno Tools refrigerant gas leak detectors feature a solid Electrolyte gas sensor and Patented UV dye detection system. The sensor and micro processor circuit are designed to detect the more difficult HFC refrigerants such as R-134a and the new HFO refrigerant R-1234yf.
FEATUREs:
SHOP FURNITURE
Unique digital alarm with numeric leak size indicator. Long life, stable sensor. Automatic calibration and reset ambient levels. Three adjustable sensitivity levels. Visual LED leak alarm near sensor. Low battery indicator. SAE J2791 Certified, CE Certified. Made in U.S.A.
2011
339-00001 339-00002
339-00002
New for
SPECIfICATIONs:
Item #
339-00001
ITEms:
339-00001
VEHICLE DETAILING
339-00002
Refrigerant gas leak detector with a solid electrolyte gas sensor Dual mode refrigerant gas leak detector with a solid electrolyte gas sensor and a Patented UV dye detection system
Sensitivity Sensor life Response time Power supply Battery life Warm up time Probe length
.05 oz./yr. R-134a, .0125 oz./yr. R-1234yf >10 years Instantaneous 4 AA Alkaline batteries 8 hours continuous <20 seconds 17"
VEHICLE DIAGNOSTICS
2-4
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
1-800-ROTUNDA OPTION #3
COLLISION REFINISHING
COLLISION REPAIR
OPTImAX 3000 CORDLEss LED LEAk DETECTION FLAsHLIgHT SUPER POWERfUL TO fIND LEAks OTHER LAmPs mIss!
FACILITY
ITEms:
FEATUREs:
164-R3735 R-134a/PAG A/C dye, (12) 1/4 oz. bottles 164-R3745 Clear-Blue coolant system dye, (24) 1 oz. bottles 164-R3754 All-in-One single dose dye for all oil-based fluids,
FLUID HANDLING
15 times brighter than regular LED lights. Cordless and rechargeable. Power comparable to super high-intensity 150 watt lamps. Inspection range of up to 20' or more. Compatible with all standard leak detection dyes.
ITEms:
each pre-filled with a single 1/4 oz. dose. Use (1) PAG dye cartridge per treatment
LIFTING EQUIPMENT
ALsO AVAILABLE:
164-R3760
POWERTRAIN SERVICE
Utilizes state-of-the-art infrared sensor technology. Certified to meet new SAE J2791 standard for electronic refrigerant detectors. 164-R3759
FEATURES:
SHOP FURNITURE
Utilizes high-performance heated-diode sensor technology. Optimum sensitivity detects leaks down to 0.25 oz./year. Patented heated diode sensor. Sensor life up to 200 hours or more. Automatically self-calibrates to neutralize background contamination. Includes sensor, replacement filters, (2) D cell batteries and rugged carry case.
0.10 oz./year sensitivity. Infrared sensor provides consistent response and cannot be poisoned by exposure to large amounts of refrigerants. Extremely long service life of 1,000 hours or more! NiMH battery provides six hours of use between charges. Detector also works with AC and DC power adapters. Headphone jack. User selectable, three-position sensitivity switch minimizes false triggering and allows for easy diagnosis of small, medium and large leaks. Includes sensor, replacement filters, rechargeable NiMH battery, AC power adapter, DC power adapter with cigarette lighter plug and rugged carry case.
VEHICLE DETAILING
ITEMS:
164-R3759
ITEMS:
PRO-Alert electronic refrigerant leak detector
164-R3760
VEHICLE DIAGNOSTICS
2-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
2-6
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED BY: GLOBAL FINISHING SOLUTIONS
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
Single/dual skin booths. Downdraft, semi-downdraft, cross-draft, side-down draft. 24' 30' booth lengths. T8 lighting.
PARTS STORAGE
GFS Prep Stations, workstations and CTOF booths provide a exible, easy-to-use work environment for a multitude of body and shop functions. Available in single or dual designs, and with an extensive list of optional equipment, you can be sure that GFS has the right prep station for your body shop.
POWERTRAIN SERVICE
MIX ROOMS
Single-skin and dual skin insulated GFS Paint Mix Rooms provide a contaminant-free environments for coating preparations and mixing. While our white pre-coated steel and color-corrected lights allow for precise color matching.
SHOP FURNITURE
PAINT BOOTHS
GFS Automotive Renish Division is changing the face of the Renish industry with innovative new concepts and technologies designed to increase prots, lower operating costs, and reduce the environmental impact of the automotive renish processes. GFS is constantly on the cutting edge of renish coating technology, and strives to improve automotive paint booths to new levels of performance and efciency. GFS manufactures the most extensive line of paint booths and nishing systems designed for body shops of all shapes and sizes.
Contact your Rotunda representative for additional information and pricing.
TURN-KEY SOLUTIONS
Global Finishing Solutions provides you with a complete turnkey solution that goes beyond just the paint booth and prep station. We can offer CAD services for shop design to a complete turnkey installation, and post purchase service of your equipment, including a full range of booth lter products. Our distribution network is familiar with local laws, and regulations, and will provide you with support to insure your equipment installation process gos as smooth as possible. WARRANTY: Extended warranty at NO COST to customers certied at Global Finishing Solutions Technical Training Centers.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
3-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
3-2
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUppLied by: CHieF aUtOmOtiVe TeCHnOLOgies
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FeatUres:
Chiefs Cab-On Anchoring System is an effective and low-cost solution that can quickly and accurately repair 2009 current Ford F-150s with light to moderate damage. When used in addition to Chiefs Cab-Off System for severely damaged trucks, youll be fully equipped to repair any 09 current Ford F-150 that comes through your shop.
Repair damaged 09 current F-150s without removing the cab. Fast to set up, easy to use. Utilizes equipment already found in most shops.
FLUID HANDLING
Items:
128-00846 Cab-on Anchoring System 128-00757 Fast Anchoring System (Required for use with
128-00846)
LIFTING EQUIPMENT
PARTS STORAGE
The rugged Design-Based Anchoring clamps can be adjusted both horizontally and vertically, enabling technicians to quickly and accurately secure the vehicle.
Each Pinch-Weld assembly features the same heavy-duty clamp as Chiefs standard anchoring systems, and is engineered to the exact angle as the pinch-welds on the 09 current Ford F-150.
The Cab-On Anchoring System adjusts to any F-150 model, and is so versatile that the frame and cab can be securely positioned with little or no parts removal. This feature alone saves a tremendous amount of prep time and allows repairs to begin sooner.
POWERTRAIN SERVICE
SHOP FURNITURE
Each Cab-On System comes complete with Rigid Cab Mounts. Because the 09 current F-150 cab oor is mild steel, other repair systems can cause deformation to the oor during repair. Chiefs patentpending design makes sure the cab stays precisely where it belongs and that the vehicle does not sustain additional damage during repairs.
Simply remove the Cab Bushings from the oor and replace them with the Design-Based Cab Mounts to prevent oor deformation during pulls.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
4-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUppLied by: CHieF aUtOmOtiVe TeCHnOLOgies
COLLISION REFINISHING
The 2009 current F-150 cab contains (7) different steel alloys, but the cab oor is mild steel. That means traditional anchoring and pulling work wont, which is why Chief and Ford engineers have teamed up to develop the Chief Design-Based Anchoring System. There are going to be a lot of 09 current F-150s on the road, and Chiefs Design-Based anchoring will ensure you have the tools to repair them correctly.
COLLISION REPAIR
FACILITY
ITEMS:
128-00836
ALsO AVaiLabLe:
FLUID HANDLING
128-00824 Shop-Hopper with 5-ton tower 128-00828 Shop-Hopper with Cross Bars
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
Chiefs proprietary F-150 anchoring system ts perfectly on Chiefs Shop-Hopper and is a snap to install.
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
Patent pending clamps are engineered to the exact angle needed, and upright locators easily adjust to securely anchor cab oor.
WHEEL SERVICE
4-2
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUppLied by: CHieF aUtOmOtiVe TeCHnOLOgies
More and more insurance companies are requiring the use of computerized measuring as part of the repair process. The Chief Velocity is far and away the most sophisticated yet simple to learn and operate system available. Fast and easy setup with full color, one-page reports on the exact condition of the vehicle frame before, during and after repairs for indisputable evidence of damage severity and quality repairs. Links directly to Ford PTS website to access the most up-to-date vehicle specic repair information and procedures.
COLLISION REFINISHING
COLLISION REPAIR
FeatUres:
Powder coated steel cabinet workstation with ABS molded top. Compact and lightweight 6" x 6" x 23" laser scanner with tray. High speed CPU with mouse and high resolution monitor. High resolution color printer. High-tech targets with beveled edges for larger scanning area. Full complement of magnetic, threaded and metal clip attachments. Optional upper body bar. Links directly to Ford PTS website.
FACILITY
FLUID HANDLING
Items:
128-00841
128-00841
GENERAL SHOP EQUIPMENT
LIFTING EQUIPMENT
PARTS STORAGE
Measure (16) points or more simultaneously. Leave Velocity in place during repairs to monitor changes as they occur for increased speed and accuracy. No more recalibrating after every pull.
POWERTRAIN SERVICE
Velocitys laser technology is never affected by outside inuences such as noise, air movement or light. The result is precise and accurate measuring and damage analysis. Highly detailed and easy to read color inspection reports provide documented proof of damage and the quality of your repairs. Velocitys live measurement during repairs enhances repair quality while reducing insurance supplements and customer comebacks.
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
4-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUppLied by: CHieF aUtOmOtiVe TeCHnOLOgies
COLLISION REFINISHING
ImpULse-E/VHT
COLLISION REPAIR
Only Chief Could Offer You So Much For So Little. The Impulse E/VHT offers all the power, durability and features youve come to expect from Chief, including electric over hydraulic operation, 10-ton towers, variable height technology and 10,000 lb. lift capacity. The Impulse E/VHT offers all of this and more ... in one rugged and good looking package.
FACILITY
Items:
FLUID HANDLING
E/VHT 18', 20 Series E/VHT 20', 20 Series Wide-Trak E/VHT 18', 30 Series E/VHT 20', 30 Series Wide-Trak E/VHT 18', 40 Series E/VHT 20', 40 Series Wide-Trak
Impulse-E/VHT Simultaneous multiple pulling with up to (4) of the E/VHTs beefy 10-ton towers and variable heights from 19 40"!
SpeCiFiCatiOns:
GENERAL SHOP EQUIPMENT Impulse-E/VHT Deck length Deck width LIFTING EQUIPMENT Working height (oor to top of deck) (6) stops Maximum length (footprint) Maximum width (footprint) Maximum height Weight (2-tower) PARTS STORAGE Weight (3-tower) Lift capacity Pulling force per tower Tie-down openings POWERTRAIN SERVICE Power U.S. Power International 18' Standard 18' (5,490 mm) 6' 8" (2,030 mm) 19 40" (483 1,016 mm) 23' 6" (7,160 mm) 10' 8" (3,250 mm) 9' 4" (2,840 mm) 5,350 lbs. (2,430 kg) 5,810 lbs. (2,640 kg) 10,000 lbs. (4,536 kg) 10-ton 178 (with optional crossmember) 120 volt AC, 60 Hz, 20 amp, 1 phase dedicated line 230 volt AC, 50 Hz, 10 amp, 1 phase 20' Wide-Trak 20' (6,096 mm) 7' 4" (2,230 mm) 19 40" (483 1,016 mm) 25' 4" (7,720 mm) 11' 4" (3,450 mm) 9' 4" (2,840 mm) 6,410 lbs. (2,910 kg) 6,870 lbs. (3,120 kg) 10,000 lbs. (4,536 kg) 10-ton 198 (with optional crossmember) 120 volt AC, 60 Hz, 20 amp, 1 phase dedicated line 230 volt AC, 50 Hz, 10 amp, 1 phase
SHOP FURNITURE
VEHICLE DETAILING
EZ Liner Express Repair System for Unibody, SUV and light pickup trucks. This portable system has a 5-ton tower and 5,500 lb. lift mechanism. This portable repair system will remove bottlenecks in the collision repair shop. This unit will operate in the technicians bay and can perform about 80% of the structural repairs in a body shop. It will streamline operations in the body shop to make them more timely and protable.
Items:
128-00847
VEHICLE DIAGNOSTICS
WHEEL SERVICE
4-4
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUppLied by: CHieF aUtOmOtiVe TeCHnOLOgies
GOLiatH
With the glut of super-sized vehicles on the road today, you need a pulling system that can handle them all. Goliath was engineered to give you all the size, power and exibility youll need to quickly and protably repair any size passenger vehicle on the market today.
COLLISION REFINISHING
SPECIFICATIONS:
Deck length: 22' or 6,706 mm Deck width: 7' 8" or 2,337 mm Working heights (floor to top of deck): 19 40" or 483 mm 1,016 mm Maximum length: 28' 6" or 8,687 mm Maximum width: 14' 8" or 3,556 mm Maximum height: 9' 4" or 2,840 mm Weight (2 tower): 7,100 lbs. or 3,220 kg Weight (3 tower): 7,750 lbs. or 3,515 kg Lift capacity: 12,000 lbs. or 5,443 kg Pulling force per tower: 10-ton or 89 kN Tie-down openings: 280 Power U.S.: 120 volt AC, 60 Hz, 20 amp, single phase, dedicated line Power International: 230 volt AC, 50 Hz, 10 amp, single phase
COLLISION REPAIR
FACILITY
FLUID HANDLING
ITEMS:
128-00817 128-00818 128-00819
128-00818 At 22' in length and 92" wide, Goliath can accommodate the largest passenger vehicles with room to spare.
TITAN-360
LIFTING EQUIPMENT
Big. Bad. Beautiful. From its brawny 10-ton towers to its impressive 12,000 lb. lift capacity, the Titan-360 combines all the raw power youll ever need to get the job done quickly, correctly and protably. Handles everything from small unitized frames to dual-axle, extended cab trucks.
PARTS STORAGE
SpeCiFiCatiOns:
Deck length with ramps: 22' With front tower extended: 24' 6" With front and rear extended: 25" Deck width: 7.5" With front towers extended on both sides: 12' 10" With rear towers extended on both sides: 12' 8" Height: 8' 5" With tower rams extended: 9' 3" Lift capacity: 12,000 lbs. Working height: 31" Hydraulic power per tower: 10-ton Controls: Handheld Recommended clearance: 2' Tie-down openings: 218
POWERTRAIN SERVICE
128-00784
SHOP FURNITURE
items:
128-00784 128-00785 128-00786 128-00787
21 Series (2 front towers/1 rear tower) 22 Series (2 front towers/2 rear towers) 31 Series (3 front towers/1 rear tower) 32 Series (3 front towers/2 rear towers)
VEHICLE DETAILING
Call 1-800-ROTUNDA option #2 or your Chief representative today to discuss your specic needs or to arrange for an on-site quotation.
VEHICLE DIAGNOSTICS
With a lift capacity of 12,000 lbs, the Titan-360 can handle any job in your shop.
WHEEL SERVICE
4-5
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
2011
With four lengths to choose from, you will find the right BenchRack for your repair needs. Use our Vision X3 measuring system to enhance the repair process.
New for
FACILITY
FLUID HANDLING
BenCHRaCK Series
LIFTING EQUIPMENT
ITEMS:
Specic by Model BenchRack 4200 BenchRack 5000 BenchRack 5500 BenchRack 6300
345-00003 345-00032 345-00031 345-00008 345-00009 345-00035 345-00036 345-00033 345-00034
Whatever your current level of productivity, CAR-O-LINERs BenchRack Series can help you surpass it. BenchRack is a marvel of function and design, with innovative features that allow you to complete each phase of the collision repair process more quickly, more easily and more protably.
Ramp Kit
345-00030 345-00049 345-00052 345-00054
PARTS STORAGE
FEATURES:
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
Available in four lengths to suit your specific repair needs. A revolutionary tilt-feature scissor lift, available on all BenchRack models, makes loading easier when approach space is limited. After loading, BenchRacks lightweight drive-on ramps can be easily removed to provide additional access to the vehicle and damage. The working height is infinitely variable to suit the technicians height preference up to an industry leading 47-1/4" with a 9,200 lb. weight capacity. Fast-anchoring pillar jacks, used to support vehicles during mounting, permit virtually any unibody or full frame car, pickup truck, sport utility or van to be clamped into place quickly and easily. Pull anywhere, 360 around the BenchRack, with hydraulic Draw Aligners that exert up to 10 tons of pulling force. Finely milled steel frame with stringent tolerances that result in a smooth, level surface and provide the to-the-millimeter accuracy CAR-O-LINER is famous for. Diamond-shaped cam locks provide a timesaving fast bolt system for anchoring and pulling components to be attached at any point along the rails.
10-ton Draw Aligner 10-ton Hydraulic Pump, Hose and Cylinder Set Ram Adapter Power Unit Hydraulic Oil Bench Parts Pillar Jack Kit Double Grab Hook 3/8" x 8' Chain with One Grab Hook
VEHICLE DIAGNOSTICS
Platform length: 13' 9", 16' 5", 18' 1", 20' 8" (4,200, 5,000, 5,500, 6,300 mm) Platform width: 3' 10" (1175 mm) Maximum height (oor to top of platform): 3' 11" (1190 mm) Maximum length (with draw aligner): Bench length + 3' 8" (1,120 mm) Maximum width (with draw aligner): 7' 6" (2,295 mm) Weight: 2,090 2,860 lbs. (950 1,300 kg) Lift capacity (max. vehicle weight): 9,200 lbs. (4,200 kg) Pulling force per draw aligner: 10-ton Power unit: 110 volt, 60 Hz, single phase
SPECIFICATIONS:
WHEEL SERVICE
4-6
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
2011
With a higher height potential, removable ramps and universal hydraulic pillar jacks, reduce repair cycle time with a "quick" solution.
COLLISION REPAIR
New for
COLLISION REFINISHING
FACILITY
FLUID HANDLING
The Quick42 frame bench utilizes centralized air and hydraulic hook-ups and offers optional mobility, automatic tilt, pulling power and a variably adjusted scissor lift which can raise the bench frame to a maximum working height of 58 inches. Drive-on ramps are available for both wide and narrow wheelbases and are removable to provide access to hard-to-reach areas of the vehicle. The bench also provides the ability to anchor on the same platform if structural repairs are needed.
LIFTING EQUIPMENT
FEATURES:
Optimized platform for light cosmetic and heavy straightening repair with drive-on capability and optional mobility. Provides easy access for cosmetic repairs. When used with the Car-O-Tronic Vision X3 measuring system, allows for quick and efcient structural diagnosis with accurate measuring in real time. Does not require dedicated vehicle-specific fixtures when using the EVO Universal System for holding, anchoring and fixturing.
Multi-functional power unit and central satellite locations for hydraulics and air hook ups.
PARTS STORAGE
POWERTRAIN SERVICE
ITEMS:
345-00037 345-00041 345-00042 345-00043 345-00039 345-00040 345-00035 345-00044 345-00038
Quick42 Bench 10-ton Draw Aligner Extension for Draw Aligner Chain Kit 10 ton Hydraulic Hose Hydraulic Pillar Jack Kit Bench Parts Quick Anchoring Ramp Kit
SHOP FURNITURE
Platform length: 13' 9" (4,200 mm) Platform width: 3' 7" (1,100 mm) Maximum height (oor to top of platform): 4' 10" (1,480 mm) Maximum length (with draw aligner): 17' 5" (5,320 mm) Maximum width (with draw aligner): 7' 4" (2,230 mm) Weight: 1,661 lbs. (755 kg) Lift capacity (max. vehicle weight): 6,600 lbs. (3,000 kg) Pulling force per draw aligner: 10-ton Power: 110 volt AC, 60 Hz, 30 amp, single phase
SPECIFICATIONS:
VEHICLE DETAILING
Enhance your structural diagnosis capabilities through use of the Car-O-Tronic Measuring System.
VEHICLE DIAGNOSTICS
4-7
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
For unmatched adaptability and efcient use of oor space, the Mark 6 Mobile System can be moved from workstation to workstation. The system can also be mounted onto an in-ground scissor lift and used with the Car-O-Tronic electronic measuring system.
2011
New for
COLLISION REPAIR
FEATURES:
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
10-ton Draw Aligner offers nearly continuous adjustment with 11 between each setting the Draw Aligner makes the correct angle easy to nd. This increased adjustment capacity reduces the number of re-adjustments needed while pulling. In addition, Mark 6s powerful Draw Aligner moves 360 around the system and has a built-in height extension for making higher pulls, faster. Finely milled steel frame provides a smooth, level surface for measuring equipment to rest on, resulting in to-the-millimeter accuracy. Optional side support system used to hold undamaged and already repaired components in place while pulling other areas. Also facilitates pushing, up pulls and down pulls. Standard Chassis Clamps and optional clamps hold vehicles securely even under the full 10-ton force of the Draw Aligner. With the lift package, a hydraulic lift allows the working height to vary up to a maximum of 54". Repairs are made faster and easier because the damaged area is easier to see and reach. In addition, by allowing the work to be performed in an upright position, the Mark 6 drive-on system reduces back, knee and shoulder fatigue that can slow down the most skilled technician.
Flexible, mobile bench system allows for customization to optimize floor space can be mounted above-ground (photo above) or in-ground (photo below).
ITEMS:
345-00006 345-00007 345-00008 345-00009 345-00003 345-00032 345-00031 345-00004 345-00002 345-00001
PARTS STORAGE
POWERTRAIN SERVICE
Mark 6 Base Frame with Lift Mark 6 Ramp Kit Power Unit Hydraulic Oil 10-ton Draw Aligner 10-ton Hydraulic Pump, Hose and Cylinder Set Ram Adapter Bench Parts Wheel Kit Mark 6 Base Frame
SHOP FURNITURE
Platform length: 13' 4" (4,060 mm) Platform width: 2' 11" (900 mm) Maximum height (oor to top of platform): 4' 6" (1360 mm) Maximum length (with draw aligner): 17' (5180 mm) Maximum width (with draw aligner): 6' 8" (2,020 mm) Weight: 1,496 lbs. (680 kg) Lift capacity (max. vehicle weight): 6,160 lbs. (2,800 kg) Pulling force per draw aligner: 10-ton Power unit: 110 volt, 60 Hz, single phase
SPECIFICATIONS:
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
Taller bench arms allow maximum work space between the bench and underside of the vehicle.
WHEEL SERVICE
4-8
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
2011
New for
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
Repair cosmetic damage, freeing larger lifts for more advanced repairs.
FLUID HANDLING
Low 4" profile to drive/roll the car over the lifting platform save cost with no ramps or additional equipment needed.
LIFTING EQUIPMENT
ITEMS:
345-00087 345-00092 345-00089 345-00090 345-00008 345-00009 345-00088 345-00091
Speed is our most compact lift-based repair system suitable for vehicles with light damage. Easy to install and easy to use, this versatile lift platform allows you to make efcient use of space in your shop. Because there are no ramps or posts around the lift, accessibility is excellent, improving ergonomics to repair vehicles faster. Speed is ideal for a range of different tasks such as sheet metalwork, assembly, disassembly, door adjustments, sanding, masking and other preparations for painting. All this, with the added capacity for light pulls using the optional draw aligner mounting. The Speed Plus allows pulling from both ends of the platform.
Speed Speed Plus 5-ton Draw Aligner 5-ton Hydraulic Pump, Hose and Cylinder Set Power Unit Hydraulic Oil Height Extension 60 mm (4 required) Speed Bench Part
PARTS STORAGE
SPECIFICATIONS:
POWERTRAIN SERVICE
FEATURES:
The Draw Aligner, with a capacity of 5 metric tons, is infinitely adjustable and self-locking, allowing you to easily set and lock the exact position required. It can be rotated within a large area so you can work more efciently. With Speed Plus, a draw aligner can be attached to both ends of the platform. Setup is fast and easy using CAR-O-LINERs easy-on/easy-off attachments. Unique bench arms are vertically adjustable, making it easy to install the chassis clamps. Vehicles can be easily driven over the platform due to Speeds low profile of only 4".
Platform length (Speed): 8' 3" (2,510 mm) Platform length (Speed Plus): 9' 4" (2,845 mm) Platform width (with arms): 3' 1" (950 mm) Maximum height (oor to top of platform): 5' 3" (1,600 mm) Maximum length (with draw aligner): 11' 10" (3,600 mm) Maximum width (with draw aligner): 8' 2" (2,486 mm) Weight: 1,371 lbs. (600 kg) Lift capacity (max. vehicle weight): 5,500 lbs. (2,500 kg) Pulling force per draw aligner: 5-ton Power unit: 110 volt, 60 Hz, single phase
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
4-9
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
COLLISION REFINISHING
2011
New for
COLLISION REPAIR
FACILITY
FLUID HANDLING
Measure the underbody and upper body with precise measuring and damage analysis.
GENERAL SHOP EQUIPMENT
Cabinet is equipped with storage for the slide, adapters and computer accessories to keep your shop organized.
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
Articulating measuring slide supplies measuring data in real-time at three times per second!
SHOP FURNITURE
FEATURES:
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
Easy to learn and use with interactive training. Upper and lower body measuring. Identifies vehicle damage areas, and just as importantly undamaged areas. Data supplied for over 13,000 vehicles. Damage and repair documentation with measuring point photos. New data CD published quarterly and new applications available via Internet. Compatible with all CAR-O-LINER collision repair systems and many competitive systems. Absolute and comparative measuring modes. Point-to-point measuring mode (Vision X3 only). No cables or targets uses Bluetooth communication. Suspension check diagnosis (Vision X3 only). Multimedia support for CAR-O-LINERs universal parts fixturing (Vision X3 only).
ITEMS:
345-00100 345-00101 345-00102 345-00017 345-00050 345-00103 345-00104
Measuring Slide (for Vision X3) Car-O-Soft Software (for Vision X3) Cabinet Measuring Bridge 4 m Measuring Bridge 5 m Car-O-Tronic Measuring Parts Battery Charger
WHEEL SERVICE
4-10
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
2011
New for
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Optimize your holding and anchoring without the need for extra fixtures.
Each component can be assembled with the others in a multitude of configurations (shown with optional Work Shop Solutions wall panels).
LIFTING EQUIPMENT
EVO is a universal system made up of an optimum number of components that offer you a wide variety of congurations. With EVO you can hold and anchor vehicles without dedicated xtures, optimizing your productivity and earnings. EVO is a modular and upgradeable system made for all vehicles on the market. The EVO System is integrated with CAR-O-LINERs data and software to support the complete vehicle repair process. The combination of an EVO System and CAR-O-TRONIC Vision X3 replaces the need to rent or buy a set of xtures for each vehicle. With EVO you can repair any vehicle and maximize your business.
PARTS STORAGE
POWERTRAIN SERVICE
FEATURES:
EVO 1 Basic Anchoring The basic system for anchoring, holding and side support during the repair. Includes (3) towers, multi-purpose clamp, track plate, adapter with bushings, chain holder, down pull and torque bar for heavy operations. EVO 2 Extended Anchoring An extension system additional to EVO 1, made for anchoring, holding and side support during the repair. Including (2) extra towers and track plates, special tools for rear axle bracket, torque bar extensions and adjustable holders. EVO 3 Holding and Fixturing EVO 3 is made for building a xture to hold new body parts in place when welding and bonding. Combined with EVO 1 and 2 you can handle all models on the market, supported by software solutions in CAR-O-TRONIC Vision X3. Examples of parts are adjustable xture heads, lockable universal joint, lock handle, all-purpose mini-clamp for frame rails, inner fenders and strut towers.
SHOP FURNITURE
The EVO System is integrated with Car-O-Liners data and software measuring system to support the complete vehicle repair process.
VEHICLE DETAILING
ITEMS:
345-00010 345-00022 345-00122
EVO 1 Basic System EVO 2 Extension System EVO 3 Holding and Fixturing System
VEHICLE DIAGNOSTICS
4-11
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
The CAR-O-LINER Work Shop Solution provides an organized inventory control panel for workshop walls or carts. Attractive panels present a professional display with sturdy construction. Enhance efciency to increase productivity and protability.
2011
New for
COLLISION REPAIR
FEATURES:
FACILITY
Inventory Control: Parts silhouettes ensure components are returned to the proper location. Space Savings: Maximize the use of wall or cart space. Flexibility: Product design range to match multiple global car manufacturers parts designs. Quality: Attractive and sturdy construction to hold multiple parts. Efficiency: Saves time by offering a consistent location to find the proper tool for the job.
FLUID HANDLING
ITEMS:
345-00013 345-00026 345-00014 345-00023 345-00119 345-00015 345-00027
Tool Cart excluding Tool Board Tool Cart Complete Tool Board Set EVO1 Tool Board Set EVO2 Tool Board Set EVO3 Tool Board 900 mm Tool Board for Trucks
Configure unique work cell designs to meet your space requirement and productivity needs.
Panels and shelves are easily mounted on walls or carts and can be reconfigured whenever you want.
LIFTING EQUIPMENT
PARTS STORAGE
The CR500 series are medium frequency inverter spot welders offering two-sided and single-sided spot welding. Equipped with a smart control panel, C-tong and versatile multi-function gun, the options for a variety of repairs include carbon rod shrinking, dent pulling and welding of screws, nuts and clip rivets.
Increase efficiency with parts silhouettes that ensure tools are returned to their proper location for easy-to-find next-time use.
FeatUres:
POWERTRAIN SERVICE
CR500DA double action function on the C-tong moves the electrode automatically back and forth to enable quick and easy movements between welding positions. CR510 offers automatic adhesive detection and adjustment by measuring the resistance.
SHOP FURNITURE
ITEMS:
345-00064 345-00072 345-00073 345-00077
CR500DA 230 volt Spot Welder CR500DA 460 volt Spot Welder CR510 230 volt Spot Welder CR510 460 volt Spot Welder
CR500DA
CR510
SPECIFICATIONS:
CR500DA Input voltage Welding amperage (max.) 230 volt or 460 volt, 50 Hz, 3 phase 11,500 amp 8.2' (2.5 m) 300 daN (674 lbs.) at 7.5 bars (109 p.s.i.) Air with fan IP21 36" x 32" x 36" (920 x 820 x 920 mm) 298 lbs. (135 kg) CR510 230 volt or 460 volt, 50 Hz, 3 phase 11,500 amp 8.2' (2.5 m) 550 daN (1,236 lbs.) at 7 bars (102 p.s.i.) Liquid IP21 36" x 32" x 36" (920 x 820 x 920 mm) 320 lbs. (145kg)
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
4-12
BRAKE SERVICE
1-800-ROTUNDA
SUppLied by: Car-O-Liner
www.fordrotunda.com
2011
New for
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Eliminate the guesswork the CTR12000 spot welder automatically senses both metal type and thickness to set power and tip pressure no technician input required. With the CTR12000, collision shops can produce virtually identical welds in about half the time of Mig welding due to signicantly fewer steps required to weld.
LIFTING EQUIPMENT
PARTS STORAGE
FEATURES:
Welds through high strength and laminated steels to include Boron metal, weld-through primer and multiple panels. Completely liquid-cooled welding, from the power module all the way to the caps, providing a greater Duty-Cycle. Advanced quality control system monitors and adjusts the welder to guarantee the total energy input. Easily determine the weld results on the smart control panel.
POWERTRAIN SERVICE
ITEMS:
345-00060 345-00061
CTR12000 208 volt C-Gun Welder CTR12000 460 volt C-Gun Welder
Automatically senses metal type and thickness to set power and tip pressure.
SHOP FURNITURE
SPECIFICATIONS:
Input voltage Welding amperage (max.) Welding cable length Electrode pressure Electrode cooling Protection Dimensions Shipping weight 208, 220, 460 volt, 50 60 Hz, 3 phase 12000 amp 19.7' (6 m) 500 daN (1,124 lbs.) at 8 bars (116 p.s.i.) Liquid IP21 48" x 27" x 32" (1220 x 680 x 800 mm) 210 lbs. (95 kg)
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
4-13
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
4-14
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLiED BY: NSS ENtERPRisEs, INC.
www.fordrotunda.com
FLOOR SCRUBBERs
NSS scrubbers set the standard for reliability and durability. They are known for their quality, performance and simplicity. Sizable solution and recovery tanks mean less lling and emptying, saving time and labor dollars. Powerful vacuum motors and swing squeegees assure excellent water pick-up, even on turns. Breakaway squeegee assemblies straight and curved are available, install quickly and minimize the potential for damage. For added convenience, on-board charges simplify recharging.
COLLISION REFINISHING
COLLISION REPAIR
203-00145
FLUID HANDLING
ACCEssORiEs:
203-00028 203-00030
Scrub grit brush (2 required) for 203-00002 Scrub grit brush (2 required) for 203-00145
203-00002
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
203-00130
VEHICLE DIAGNOSTICS
5-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: TOMCAT EQUIPMENT
www.fordrotunda.com
COLLISION REFINISHING
Small and medium sized walk behind scrubbers are ideally suited for congested service areas with their small footprint, but built tough to take on the task. The recovery tanks are fully accessible and the tank tips back for easy maintenance.
2011
New for
COLLISION REPAIR
ItEms:
MiniMag 20" disk (brush assist) MiniMag 24" cylindrical/sweeps & scrubs MiniMag 26" disk scrub only (drive)
FLUID HANDLING
Built with the same heavy-duty construction and Do it Yourself service capabilities as our small/medium models. Combining large capacities in a compact footprint for unmatched maneuverability and productivity.
ItEms:
GENERAL SHOP EQUIPMENT
LIFTING EQUIPMENT
Magnum 26" disk (drive) Magnum 27" cylindrical (drive) Magnum 30" disk (drive) Magnum 30" cylindrical (drive) GTX 30" disk GTX 30" cylindrical GTX 34" disk GTX 34" cylindrical
SPECifiCAtiONs:
PARTS STORAGE
MicroMag
MiniMag
349-00001 349-00002 349-00003
Magnum
349-00004 349-00005 349-00006 349-00007
GTX
349-00008 349-00009 349-00010 349-00011
Item #
POWERTRAIN SERVICE
Solution tank
35 gallons 35 gallons Up to 34" (6) 245 ah up to 7 hours 40,000 sq.-ft./hour 32+ bays
Recommend
INCLUDEs:
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
5-2
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: JOHNDOW INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
256-00061
256-00112
FLUID HANDLING
Extract used oil and other fluids from any vehicle using these vacuum extraction systems. Vacuum-charged units are completely portable and easy-to-use. Self-evacuating feature makes emptying clean and easy.
UL Approved. For use on unleaded, kerosene, diesel and biodiesel fuels. Complies with all OSHA requirements. Compact, cart-style design allows easy maneuverability. Cast iron rotary pump with steel rotor and carbon vanes to provide years of trouble-free use. 10" heavy-duty never flat rear wheels with ball bearing hubs for durability and low rolling resistance. Two way filter kit available. 8' PVC hose with integral steel grounding wire. Contents decal set included.
256-00061 FeAtures:
6 gallon steel tank. 7' suction hose. 10' evacuation hose. Easy-to-read vacuum gauge. 7" wheels for easy handling. Sight tube for suction probes. Hose guard keeps suction hose from crimping. Weight: 45 lbs.
LIFTING EQUIPMENT
PARTS STORAGE
IteMs:
256-00061 256-00062 256-00064 256-00065 256-00112 256-00113
Complies with all OSHA requirements. For use on unleaded, kerosene, diesel and biodiesel fuels. Variable speed air motor. Bronze pedestal pump with Viton seals. Bronze gears with carbon bearings. Ergonomically positioned throttle control with variable speed capabilities. Contents decal set included.
6 gallon fluid evacuator 20 gallon fluid evacuator 10 gallon low profile portable drain 16 gallon portable drain 22 gallon portable oil change station 25 gallon heavy-duty self-evacuating oil drain
POWERTRAIN SERVICE
ACCessories:
256-00063 256-00125
SHOP FURNITURE
12" long 3/8" o.d. bendable adapter Big-mouth transmission pan adapter
STARTING & CHARGING SYSTEMS
IteMs:
256-00203 Pending* Pending*
25 gallon gas caddy 30 gallon gas caddy 30 gallon air operated gas caddy
ACCessories:
256-00124
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
6-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: teMpo/WIS AssoCiAtes
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
30 gallon hand-operated
Drains, filters, stores and refills fuel tanks. Our tanks are designed to minimize the risks associated with repair operations on fuel tanks, fuel gauges and a variety of other fuel system procedures. They offer safer storage by reducing fumes, plus several grounding devices safely dissipate electrical static discharge.
FeAtures:
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
Fuel flow system double stacked; four-way valve controls all functions, eliminating check valves and a shutoff valve. The pump and filtration unit permits one-hose operation. Reduce possibility of fire eliminates open storage and reduces fumes. Comes equipped with (2) safety grounding devices. Safety grounds (1) ground in the hose and an additional 14-gauge wire ground with alligator clip. Flame arrestor fill enables unit to be used as a mobile fuel supply. Magnetic fuel gauge glass covered, safety sealed cap to help prevent fuel and fume leakage. 14-gauge steel, all MIG welded tank. Specially treated filter to separate water from fuel and trap sediment, rust and dirt. High volume pumps are either air or hand-operated. Hand units pump 1 gallon per 5 strokes, air units pump 10 gallons per minute. Cleaning drain at bottom. UL Approved fully complies with OSHA requirements. Gasoline and Diesel fuel decals are provided.
IteMs:
STARTING & CHARGING SYSTEMS
30 gallon hand-operated 30 gallon air-operated 100 gallon hand-operated 100 gallon air-operated
VEHICLE DETAILING
NOTE: Replacement parts are available and can be ordered through the RDS program.
1-800-ROTUNDA OPTION #3
WHEEL SERVICE
6-2
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: GrACo
www.fordrotunda.com
IteMs:
evacuation kit
COLLISION REPAIR
InCludes:
IteMs:
160-00754
160-00754 25 gallon used oil drain (black) 160-01019 25 gallon used coolant drain (green)
3/4" UL Listed diaphragm pump. Mounting bracket. Hose and fitting kit. Y-strainer. Air filter. Air regulator. 160-00015 shown with optional 160-01019 coolant drain and tank, sold separately.
FACILITY
FLUID HANDLING
IteMs:
Oil PuMps
FeAtures:
Double ball check pumps for light fluids and motor oils. Universal mount, air operated.
LIFTING EQUIPMENT
InCludes:
1" UL Listed diaphragm pump. Mounting bracket. Hose and fitting kit. Y-strainer. Air filter. Air regulator.
PARTS STORAGE
IteMs:
160-00303
160-00311 1:1 ratio for distances up to 100' 160-00303 5:1 ratio for distances up to 350' 160-01020 3:1 ratio for distances up to 250'
POWERTRAIN SERVICE
160-01114 shown with optional 160-00754 oil drain and tank, sold separately.
SHOP FURNITURE
IteMs:
InCludes:
Large 31" bowl with grate. Swivel casters on same side as handle for easy mobility. Uses a standard air chuck to pressurize to drain, and easy-to-read sight level gauge.
VEHICLE DETAILING
IteMs:
160-01030
VEHICLE DIAGNOSTICS
6-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: GrACo
www.fordrotunda.com
COLLISION REFINISHING
GreAse PuMps
FeAtures:
Complete portable grease pump packages with hose and fitting kit, caster base and dispense valve. Package is based around the 50:1 ratio Fire-Ball pump and includes a follower plate. 160-01069
COLLISION REPAIR
Non-metered valves for the dispensing of lubricants and antifreeze where the fluid does not need to be metered such as with an inventory control system. 160-00854
FACILITY
IteMs:
IteMs:
Also AVAilAble:
FLUID HANDLING
non-metered oil valve with rigid extension non-metered valve with gear oil extension non-metered oil valve with flexible extension non-metered antifreeze valve
Reels
GENERAL SHOP EQUIPMENT
IteMs:
160-01049
LIFTING EQUIPMENT
Digital metered dispense valves for accurate dispensing of motor oils, ATF, gear oils and antifreeze.
PARTS STORAGE
IteMs:
POWERTRAIN SERVICE
SHOP FURNITURE
Manual Dispense 160-01049 Oil meter with rigid extension 160-01050 Oil meter with flexible extension 160-01051 Gear oil meter 160-01052 Antifreeze meter Preset Dispense 160-01053 Preset oil meter with rigid extension 160-01054 Preset oil meter with flexible extension 160-01055 Preset gear oil meter 160-01056 Preset antifreeze meter
FeAtures:
160-01048
Hand-operated gear oil dispense package. Package designed for 16 gallon kegs.
IteMs:
VEHICLE DETAILING
160-00029
FeAtures:
InCludes:
VEHICLE DIAGNOSTICS
Hand-operated lever action pump. Suction tube. Caster base. Product hose. Metered dispense valve. 160-00029
Console for dispensing of (2) fluids to as many as (6) locations and all components needed to dispense (1) fluid to (1) location. Additional solenoids and ready kits must be ordered separately.
IteMs:
160-01048
WHEEL SERVICE
6-4
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: sAMson
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
ITEMS:
FACILITY
267-00121
267-00122
system air
ALSO AVAILABLE:
hose reel air. Same features as 267-00121, excludes heavy-duty three wheel cart, includes wallmount bracket for pump and hose reel. Dispensing hose reel 30' x 5/8"
FLUID HANDLING
FeAtures:
Eliminates the need for a separate pumping system. Uses shop air for fast evacuation of used oil. 27 gallon capacity with side level gauge. 360 positionable collection bowl with anti-splash mesh. Steel construction with heavy-duty wheels.
LIFTING EQUIPMENT
IteMs:
PARTS STORAGE
Also AVAilAble:
267-00002
267-00039
POWERTRAIN SERVICE
Easily transfers your used oil from roll-around drains to storage tanks.
267-00022 Waste oil evacuation system
SHOP FURNITURE
InCludes:
1" diaphragm pump Wall mount bracket 10' suction hose 5' outlet connection 2' air inlet hose Dry brake coupler and nipple
267-00022
Eliminates the need for a separate pumping system. Waste oil drain
VEHICLE DETAILING
InCludes:
27 gallon capacity, steel construction Oversized extension collection bowl Tool tray
VEHICLE DIAGNOSTICS
267-00036
6-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: sAMson
www.fordrotunda.com
Double-acting pumping design provides less vibration, even flow and pressure, longer life and lower repair costs.
IteMs:
COLLISION REPAIR
3:1 ratio oil stub pump 5:1 ratio oil, ATF and gear lube stub pump 55:1 ratio grease pump for 400 lb. drum
Heavy gauge plate steel with double pedestal side supports and hose guide arms. Permanently lubricated bearings. Corrosion-proof swivel.
IteMs:
FLUID HANDLING
267-00042 Air/water reel 3/8" x 40' 267-00044 Oil reel 1/2" x 40' 267-00046 Grease reel 1/4" x 40'
267-00006
267-00042
Unique precision machined die-cast aluminum base and guide arm provide rigidity and structural strength. Full port reduces pressure loss.
IteMs:
LIFTING EQUIPMENT
Air hose reel 3/8" x 30' Air hose reel 3/8" x 50' Aluminum oil reel 30' x 1/2 1500 p.s.i. Aluminum oil reel 50' x 1/2 1500 p.s.i.
PARTS STORAGE
IteMs:
POWERTRAIN SERVICE
267-00112 Electronic control handle with (1) does all outlet Electronic control handle with rigid outlet
267-00060
267-00059
Also AVAilAble:
SHOP FURNITURE
267-00057
Samson provides a complete line of fluid management systems. IMS can control up to 16 products to well over 100 locations.
SysteM DetAils:
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
PC Based or free standing. Product security. Inventory levels. E-mail inventory level notification. Dispensing reports: By product. By date. By user.
ITEMS:
267-00111
267-00111
6-6
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: bAlCrAnK
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
ITEMS:
108-02095 108-02093
FACILITY
iteMs:
108-02099
108-02094
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
These kits provide suction evacuation for the Spillguard Drain. System offers a quality solution for used fluid needs.
Enhance the look of your dealership service bays with all-steel enclosed hose reel banks. You can customize the colors to match your dealership. Call to discuss color options.
SHOP FURNITURE
IteMs:
108-02162 108-02163
Used oil kit with 1" diaphragm pump Used oil kit with 3/4" diaphragm pump
FeAtures:
Wall bracket. Air hose. Suction hose. Fluid hose with dry-break coupler. Air regulator. Air shutoff valve.
InCludes:
Sleek all-steel construction. Low maintenance black powder-coat finish. Easy selection and installation. 6-roller outlet for smooth hose extension in all directions.
Fluid Application
Hose Size
VEHICLE DETAILING
Motor Oil, Gear Oil, ATF 1/2" x 30' Air and Water 3/8" x 30'
NOTE: All reels in table may be combined in any mix to make a full reel bank.
VEHICLE DIAGNOSTICS
6-7
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: bAlCrAnK
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
108-02160
FACILITY
FLUID HANDLING
Refill a vehicles DEF tank directly from the 55 gallon drum using this portable 110 volt system. Save money by purchasing DEF fluid in bulk 55 gallon drums.
Refill a vehicles DEF tank directly from the tote using this 110 volt system. Save money by purchasing DEF fluid in a 275 gallon IBC tote.
FeAtures:
110 VAC centrifugal pump. Portable heavy duty three wheel drum cart. Drum Quik-Pro Coupler and suction tube assembly. Resettable electronic dispensing meter. 12' dispense hose. Stainless Steel deluxe automatic shut-off nozzle.
FeAtures:
IteMs:
LIFTING EQUIPMENT
110 VAC centrifugal pump. Tote pump mounting plate. Quik-Pro Coupler 2" Buttress bung tote coupler and suction tube assembly. Resettable electronic dispensing meter. 12' dispense hose. Stainless Steel deluxe automatic shut-off nozzle.
IteMs:
electric
Supplied by: MisCo
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
New Ford diesel-equipped vehicles are required to meet strict new EPA emissions guidelines. Ford has elected to employ Selective Catalytic Reduction (SCR) technology to meet these guidelines. All SCR-equipped vehicles must carry a special liquid urea-based fluid onboard which is injected into hot exhaust gases before they enter the catalytic converter. The fluid, known as Diesel Exhaust Fluid (DEF) in the U.S. and AdBlue in Europe, must be kept within a very narrow concentration range for optimal performance and to prolong the life of SCR components. Even concentration variations of as little as +/-0.8% will prevent a DEF fluid from meeting the specifications mandated by the International Standards Organization (ISO). DEF dilution or contamination can impact system performance and operating and maintenance costs. The Ford Diesel Exhaust Fluid (DEF/ AdBlue) Tester is the only approved method for testing DEF fluid in Ford vehicles to ensure that it is within specified limits. It only takes a few drops of DEF, and a couple of seconds, to perform a test and obtain results precise to +/-0.1%. Made in the USA, by MISCO.
IteMs:
335-00001 Ford Diesel Exhaust Fluid (DEF) Tester 335-00002 Full Kit Containing DEF Tester, Armor Jacket, and
VEHICLE DETAILING
Rugged Case
ACCessories:
335-00003 Rubber armor jacket for DEF tester color black 335-00004 Virtually indestructible rugged storage case for DEF
VEHICLE DIAGNOSTICS
tester
6-8
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
TO PROVIDE ThE MOST aCCURaTE aIR REQUIREMENTS fOR yOUR aPPLICaTION, IT IS SUGGESTED ThaT yOU USE ThE fOLLOwING CaLCULaTIONS:
A - Service Bays B - Body Shop C - If all in one building Number of bays x 2.4 = _______ Total Number of bays x 5.5 = _______ Total Add together _______ Grand Total
LIFTING EQUIPMENT
To base compressor selections on just service bays, use calculation A. On just Body Shops, use calculation B. If all in one building, use calculation C. If the calculation falls between two sizes, then chose the higher hp. When the whole operation is depending on one compressor, it is recommended that a duplex unit or a double packaged compressor be used. In all cases we strongly suggest a two-compressor package or a duplex, rather than a single unit. NOTE: Since water in air lines is damaging to air tools and is especially damaging to car painting operations, it is strongly recommended that both aftercoolers and compressed air dryers be used. Duplex air compressors are a unique conguration that lets you alternate automatically between two compressors, or, when required, operate two compressors simultaneously to deliver double the c.f.m. of a single unit. They are specically designed to accommodate additional capacity in peak periods. This system also provides 100% back up in case one compressor is down for maintenance or repairs. Rotary screw compressors are an alternative to the reciprocating compressor. Designed for a 100% continuous-duty cycle. Continuous operation means that the compressor may be sized closer to the actual required capacity (c.f.m.) that is needed. Compressor units come completely packaged with sound enclosure standard for extremely low noise operation. They have a small footprint and can be installed right in the work environment eliminating the separate compressor room. There are few moving parts in the compressor, which reduces maintenance costs. The rotary screw compressor is designed to run 100% of the time and is most efcient when running continuously.
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
7-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
All units are completely assembled, pre-wired, pre-piped, ready to install for quick, easy connection and start-up. Two stage splash lubricated compressor pumps. Mounted on an ASME coded air receiver with a pressure relief and service drain valve, pressure gauge and vibration isolators. 1800 r.p.m. NEMA rated electric motor. Centrifugal unloader for loadless starts. Automatic start/stop controls. Low oil protection switch. Magnetic starter in a NEMA rated enclosure. Automatic tank drain. Single phase units are available up to 7.5 hp. Factory filled with ChampLub lubricants. WARRANTY: Five-year limited on compressor pump receiver and electric motor.
L x W x H (Inches)
66-1/2 x 23-1/4 x 49 66 1/2 x 23-1/4 x 49 32-1/2 x 24 x 75 32-1/2 x 24 x 75 32-1/2 x 24 x 75 32-1/2 x 24 x 75 70-1/2 x 25 x 53-1/4 43-1/2 x 30 x 81 70-1/2 x 25 x 53-1/4 88-1/2 x 30 x 60-1/2 72 x 27-1/2 x 64-1/2 89 x 30-1/4 x 71-1/2 72 x 27-1/2 x 64-1/2 89 x 30-1/4 x 71-1/2 72 x 27-1/2 x 64-1/2 89 x 30-1/4 x 71-1/2
LIFTING EQUIPMENT
Duplex units include the same features as simplex packages. Utilize (2) two stage splash lubricated compressor pumps. Mounted on a single horizontal receiver. (2) Mounted starters and (1) alternator. (2) NEMA rated electric motors. Single phase units are available up to 7.5 hp. WARRANTY: Five-year limited on compressor pump receiver and electric motor.
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
082-00634
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
NOTE: Some compressor packages are available in 208/230/460 volts, 3 phase or 208/230 volts, 1 phase. Add sufx to Item Number for required voltage. Sufx A = 208 volt/1 phase Sufx B = 230 volt/1 phase Sufx C = 208 volt/3 phase Sufx D = 230 volt/3 phase Sufx E = 460 volt/3 phase example: 082-00633D = 5 hp, 230 volt/3 phase model 082-00646 Contact 1-800-ROTUNDA option #2 for installation quotes and for all of your air compressor requirements.
WHEEL SERVICE
7-2
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
Noise Levels as low as 67 dBA! Separate compressor and motor chambers with dedicated cooling circuits for cool operation and long life. Oil Site Gauge for ease of monitoring and service. Filter Maintenance Indicator for ease of monitoring. Stainless Steel Enclosure. Utilizes the legendary Champion R Series Compressor Pump. 10 and 15 hp available.
L x W x H (Inches)
67 x 31-1/2 x 53-1/2 67 x 31-1/2 x 53-1/2 67 x 31-1/2 x 53-1/2 67 x 31-1/2 x 53-1/2
COLLISION REPAIR
FACILITY
WARRANTY: All Champion Reciprocating Compressors include Five-year limited on compressor pump, receiver, and electric motor. NOTE: 3 phase Evolution compressors are available in 208/230/460/575 volts. 1 phase available in 208/230 volts. NOTE: Base-Mount Units Also Available. Contact 1-800-ROTUNDA option #2 for installation quotes and for all of your air compressor requirements.
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
082-00707
SELECT THE PROPER REFRIGERATED AIR DRYERS FOR SERIES 082 AIR COMPRESSORS
Non-Cycling Refrigerated Dryers Refrigerated dryers are the simplest method to remove moisture from your compressed air lines. Water is a major factor in the degradation of piping and air tools it clogs small air passages and dilutes or chemically reacts with products that come in contact with compressed air. These and other costly problems can be eliminated by reducing the temperature of the compressed air so that condensation cannot occur in your air line. All dryers listed: Maximum pressure 200 p.s.i.g. Rated in accordance with CAGI Standard ADF 100. 100 p.s.i.g. and 100F saturated with an ambient temperature of 100F. Dew point range is 38 F 4F.
Oil/Water Separator Item # 082-00789 082-00790 Item # 082-00783 082-00784 082-00785 082-00786 082-00787 082-00788
7-3
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WARRANTY: Up to 10 years available on air end. NOTE: 3 phase compressor packages are available in 208 230/460 volts. 1 phase available in 208 230 volts. NOTE: Variable Speed Models Available for Reduced Energy Costs.
LIFTING EQUIPMENT
FEATURES:
POWERTRAIN SERVICE
SHOP FURNITURE
High Efficiency Airend. High Efficiency TEFC Motor Standard (L07-L22). WYE Delta Starter Standard (L07 L22). Fully Integrated Airend Design. Microprocessor Based Control System. Small Footprint Saves Floor Space. Dual Position Controller (L07 L22). Oil Carryover less than 3 PPM. Easy Access to Air Filter, Oil Filter and Separator. Automatic Belt Tensioning System. Direct Drive L30 & L37. (40 and 50 hp.)
hp
10 15 20 25 30 40 50
Phase 3 3 3 3 3 3 3
Dimensions L x W x H (Inches) 26-1/2 x 24.8 x 41.3 26-1/2 x 24.8 x 41.3 31 x 27-1/2 x 47.3 31 x 27-1/2 x 47.3 31 x 27-1/2 x 47.3 68 x 36 x 65 68 x 36 x 65
WARRANTY: Up to 10 years available on air end. NOTE: 10 30 hp, 3 phase compressor packages are available in 208 230/460 volts. 40 50 hp are available in 460 volts. NOTE: Variable Speed Models Available for Reduced Energy Costs.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
082-00825E125
NOTE: Also available at 100 p.s.i.g., 150 p.s.i.g. or 190 p.s.i.g. Contact 1-800-ROTUNDA option #2 for installation quotes and for all of your air compressor requirements.
WHEEL SERVICE
7-4
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: CURTIS-TOLEDO
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Duplex air compressors are shipped with start-stop control, ASME safety valve, ASME air receiver, pressure gauge, intake filter/ silencers, tank shut-off valve, manual tank drain, totally enclosed belt guard and mounted and wired alternator panel.
LIFTING EQUIPMENT
FEaTURES:
Simplex air compressors are shipped with start-stop control, ASME safety valve, ASME air receiver, pressure gauge, intake filter/ silencers, tank shut-off valve, manual tank drain, totally enclosed belt guard and mounted and wired magnetic starter.
FEaTURES:
Completely assembled, pre-wired, pre-piped units are ready to install. Heavy-duty cast iron construction. Stainless steel valves. ASME air receiver built with heavy gauge steel. Loadless start. Low power consumption. Single phase offered in 5 and 7.5 hp. Factory filled with LP lubricant.
Completely assembled, pre-wired, pre-piped units are ready to install. (2) mounted magnetic starters NEMA enclosed, (1) alternator. (2) electric NEMA rated motors. Heavy-duty cast iron construction. Stainless steel valves. ASME air receiver built with heavy gauge steel. Loadless start. Low power consumption. Single phase offered in 5 and 7.5 hp. Factory filled with LP lubricant.
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
OPTIONS:
304-00020
WARRANTY: Five-year limited on compressor pump, receiver and the electric motor. NOTE: Must specify voltage when ordering. Available in 208/230/460 volt.
FULLy PaCkaGED SIMPLEx aND DUPLEx COMPRESSORS haVE aLL ThE fEaTURES Of ThE BaSE COMPRESSORS PLUS:
Automatic tank drain. Radiator style air-cooled aftercooler. Tank isolator pads. Low oil shut down protection. Dual control.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
7-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: CURTIS-TOLEDO
Phase Voltage Tank (Type/Gal.)
www.fordrotunda.com
Dimensions L x W x H (Inches)
COLLISION REFINISHING
230 230 208/230/460 208/230/460 230 230 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460
H/80 V/80 H/80 V/80 H/80 V/80 V/80 H/80 H/120 H/120 H/120 H/120 H/120
67 x 20 x 51 28 x 39 x 69 67 x 20 x 51 28 x 39 x 69 67 x 20 x 51 28 x 39 x 72 28 x 39 x 72 67 x 20 x 51 73 x 28 x 55 72 x 28 x 58 72 x 28 x 58 72 x 36 x 51 72 x 36 x 51
COLLISION REPAIR
FACILITY
FLUID HANDLING
304-00099 304-00100
Duplex Reciprocating Compressors 304-00101 5 5 7.5 7.5 10 15 20 25 30 36 36 46.4 46.4 68.4 99 153 182.8 204.4 1 3 1 3 3 3 3 3 3 230 208/230/460 230 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 H/120 H/120 H/120 H/120 H/120 H/200 H/240 H/240 H/240 74 x 26 x 53 74 x 26 x 53 74 x 26 x 53 74 x 26 x 53 78 x 28 x 55 84 x 34 x 66 98 x 52 x 74 98 x 52 x 74 98 x 52 x 74
LIFTING EQUIPMENT
PARTS STORAGE
Simplex Fully Packaged Reciprocating Compressors 304-00046 304-00001 304-00002 5 5 7.5 7.5 10 10 15 20 25 30 18 18 23.2 23.2 34.2 34.2 49.5 65.1 91.4 102.2 3 1 3 1 3 3 3 3 3 3 208/230/460 230 208/230/460 230 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 V/80 V/80 V/80 V/80 H/120 V/120 H/120 H/120 V/120 V/120 64 x 23 x 49 64 x 23 x 49 64 x 23 x 49 64 x 23 x 49 73 x 28 x 55 38 x 32 x 80 72 x 28 x 58 72 x 28 x 58 72 x 36 x 51 72 x 36 x 51
POWERTRAIN SERVICE
SHOP FURNITURE
Duplex Fully Packaged Reciprocating Compressors 304-00012 304-00014 304-00013 304-00015 5 5 7.5 7.5 10 15 20 25 30 36 36 46.4 46.4 68.4 99 153 182.8 204.4 1 3 1 3 3 3 3 3 3 230 208/230/460 230 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 208/230/460 H/120 H/120 H/120 H/120 H/120 H/200 H/240 H/240 H/240 74 x 26 x 53 74 x 26 x 53 74 x 26 x 53 74 x 26 x 53 78 x 28 x 55 84 x 34 x 66 98 x 52 x 74 98 x 52 x 74 98 x 52 x 74
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
304-00057
H-Horizontal V-Vertical
WHEEL SERVICE
7-6
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: CURTIS-TOLEDO
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
304-00037
Voltage/Phase/Hz 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60 460/3/60 115/1/60 115/1/60 115/1/60 115/1/60 115/1/60 230/1/60
POWERTRAIN SERVICE PARTS STORAGE LIFTING EQUIPMENT GENERAL SHOP EQUIPMENT
Max. Airflow s.c.f.m. 25 35 50 75 100 150 200 20 25 35 50 75 100 Capacity @ 100 p.s.i.g. (s.c.f.m.) 20 35 60 100 20 35 60 100 170 250
304-00035
1/2 1/2 1/2 1 1/2 1/2 1/2 1 1 1-1/2
VEHICLE DETAILING STARTING & CHARGING SYSTEMS SHOP FURNITURE
304-00033 304-00053
VEHICLE DIAGNOSTICS
7-7
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: CURTIS-TOLEDO
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FSCURTIS SE Series oil-injected rotary screw air compressors combine American ingenuity, German engineering and emerging market content to provide you with world class innovation and maximum value from 5 to 50 hp. Each quiet spacesaving package incorporates eCOOL Technology through compartmentalized thermal zones to increase efciency and deliver maximum performance and value for your energy dollars.
FACILITY
FEaTURES:
304-00067
FLUID HANDLING
Powder-coat painted enclosure. Laminated oil-proof sound insulation. Washable cabinet pre-filtration panels. Heavy-duty air intake filter. 24 volt DC control voltage transformer. Auto-tensioning belt drive system. Spin-on oil filter and air/oil separator. LubePlus 8000 synthetic lubricant. Air-cooled oil cooler and aftercooler. Moisture separator with automatic drain.
304-00085 Voltage/Phase
LIFTING EQUIPMENT
Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Tank-mounted rotary screw compressor Tank-mounted rotary screw compressor Tank-mounted rotary screw compressor Tank-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor Plate-mounted rotary screw compressor
5 7.5 10 15 20 25 30 40 50 5 7.5 10 15 20 25 30
200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3 200/230/460/575/3
PARTS STORAGE
POWERTRAIN SERVICE
Fully Packaged, Base Plate-Mounted with 120 Gallon and Refrigerated Dryer and Prelter
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
7-8
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: JOhNDOw INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
E. STOP FLaNGE
The Euro-style state-of-the-art system for efficiently and effectively removing toxic exhaust fumes from your service department. Because of its modular design, the EuroVent system can be quickly and easily engineered for any facility. Automotive and heavy-duty systems available.
Flange bolts on end of exhaust rail to seal the rail and prevent the sliding crab from derailing.
ITEMS:
256-00026 256-00079
LIFTING EQUIPMENT
A. ExhaUST faNS
Fans are designed especially for exhaust extraction systems. UL Listed. Contact JohnDow for proper fan sizing.
The sliding crab allows for fewer drops, as the system can be shared by (2) or more technicians.
PARTS STORAGE
Connects AVA-SP fans 1/2 hp, 3/4 hp and 1 hp directly to exhaust rail.
ITEMS:
256-00021 256-00022 256-00023 256-00052
ITEMS:
256-00024 256-00053
4" automotive sliding hose reel 3" sliding crab automotive 4" sliding crab automotive 6" sliding crab heavy-duty
POWERTRAIN SERVICE
ExhaUST HOSE
Lightweight crushproof style hose for use with sliding crabs and reels. Withstands temperatures up to 300 F. 25' sections.
SHOP FURNITURE
HOSE SUPPORT
Automotive coupler Heavy-duty coupler
ITEMS:
256-00005 256-00006
ITEMS:
256-00001 256-00072
VEHICLE DETAILING
TO haVE a EUROVENT SySTEM DESIGNED fOR yOUR SERVICE DEPaRTMENT CaLL 1-800-ROTUNDA OPTION #2.
VEHICLE DIAGNOSTICS
7-9
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: JOhNDOw INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
This easy-to-use portable exhaust extraction system is a practical and affordable solution for effectively removing toxic exhaust fumes from your auto repair facility and other work areas where toxic fume removal is needed.
COLLISION REPAIR
FEaTURES:
FACILITY
Positioned next to the vehicle, the high output suction fan captures fumes and discharges them safely up to 30' away. The 3/4 hp, 110 volt (350 c.f.m.) fan is mounted in an integrally molded, high impact polyethylene ow thru case. The mobile base makes the system easy to position behind the vehicle or move around the shop. Height position is controlled by a quick-release, spring loaded, cam lock.
FLUID HANDLING
ITEMS:
256-00134
256-00134
Each system comes complete with a 3-piece floor assembly, 8' crushproof exhaust hose, tailpipe adapter and hose insertion guide.
LIFTING EQUIPMENT
FEaTURES:
PARTS STORAGE
Three-piece telescoping design provides up to 5" of adjustability, making installation easier and faster. Three-step finishing process for superior corrosion protection. Patented rubber door design.
ITEMS:
256-00126 256-00127
3" complete underground exhaust system 4" complete underground exhaust system
POWERTRAIN SERVICE
256-00126
SHOP FURNITURE
ITEMS:
256-00135
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
TO haVE a EUROVENT SySTEM DESIGNED fOR yOUR SERVICE DEPaRTMENT CaLL 1-800-ROTUNDA OPTION #2.
256-00135
WHEEL SERVICE
7-10
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: NORCO INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
209-00105
FLUID HANDLING
ShOP PRESSES
Bed plates are included with each press. Shielded heavy-duty rams have return springs. Hydraulic power units are bearing mounted for horizontal movement on the head channel, making positioning quick and easy. Zero distortion heavy-duty frame construction adds to the life expectancy of all presses. Air/ hydraulic presses have the same specications as the manual units and include an air/hydraulic foot pump and liquid lled pressure gauge.
PARTS STORAGE
POWERTRAIN SERVICE
209-00150
Between Between Base Base Overall Uprights Bed Rails Width Ht. Ht. 5" 6" 6" 5-5/8" 6" 7" 7" 7-3/8" 34" 40" 40" 50" 28" 28" 28" 40" 70-5/8" 70-5/8" 76-3/4" 72-3/4" Wt. Lbs. 266 394 430 801
STARTING & CHARGING SYSTEMS SHOP FURNITURE
ACCESSORIES:
209-00066 50-ton arbor plates 209-00109 Accessory kit for 20-ton press includes arbor
VEHICLE DETAILING
209-00110 209-00117
plates, V pushing adapter, 3/4" ram diameter, 1" diameter ram and bearing puller 20-ton arbor plates Accessory kit for 50-ton press includes arbor plates, threaded adapter, ram cap, V pushing adapter, 1" diameter ram, 1-1/4" diameter ram and bearing puller
VEHICLE DIAGNOSTICS
7-11
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED By: OTC/SPx SERVICE SOLUTIONS
25-TON PRESS
COLLISION REFINISHING
FEaTURES:
Large 30" x 44-1/2" working area under the ram. Rugged frame resists buckling and bending. Press bed is rapidly raised and lowered by a winch.
COLLISION REPAIR
ITEMS:
300-OTC1833E
25-ton press
INCLUDES:
FACILITY
FLUID HANDLING
300-OTC1833E
FEaTURES:
300-OTC1825E
LIFTING EQUIPMENT
Adequate power for a multitude of pressing jobs bending, straightening, removing and installing tightly tted parts. Frame has open throat extensions which permit work on bulky assemblies. Moveable ram head has full horizontal travel for off-center pressing. Two-speed hydraulic hand pump ensures fast pressing action.
PARTS STORAGE
ITEMS:
INCLUDES:
POWERTRAIN SERVICE
Press frame. Hydraulic ram with threaded insert. Hand-operated pump with gauge. 6' hose. Adjusting screw. Adjusting crank.
300-OTC1880 300-OTC1833E 300-OTC1825E 69-1/2" 5-3/4 46" 30" 41-1/2" x 28" 6-1/4" 4" 64" 34-7/8" 20" 28" x 28" 2" N/A
SHOP FURNITURE
SPECIfICaTIONS:
Item # Overall height Maximum distance, ram to bed Width between press uprights Floor space required Ram to piston travel Lower bolster adjust (increments)
VEHICLE DETAILING
ACCESSORy SETS
VEHICLE DIAGNOSTICS
ITEMS:
300-OTC1881E 300-OTC1880E
Press accessory set for 25-ton press Accessory set for 17-1/2 ton press 300-OTC1881E
WHEEL SERVICE
7-12
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED BY: QUaLITy STaINLESS PRODUCTS
COLLISION REFINISHING
Adjustable extra strong clamps single and double clamps are interchangeable (left to right and right to left) to meet any positions of the coils. Ensures perfect grip every time. Front protection guard positioned for beginning the operation. Provides safe operation. Safety microswitch prevents operating if guard is not correctly positioned. Bottom helper plate blocking the strut when the upper cap is unscrewed, prevents it from falling down, and allows the operator to work with both hands free. Twin foot pedals for easy operation.
COLLISION REPAIR
FACILITY
ITEMS:
337-00002
FLUID HANDLING
ACCESSORIES:
337-00003 337-00004
Strut compressor top compression plate Wheel kit for strut compressor
LIFTING EQUIPMENT
Comfort. Savings. Rapid and long-term return on investment. EnergyLogics waste oil furnaces and boilers help eliminate up to 100% of your shop heating bills. Waste oil heating allows you to recover energy and safely recycle used oil onsite. EnergyLogic systems are designed to be durable, reliable and simple to maintain. They are so easy to own and operate that all you have to do is set the thermostat as you do with conventional HVAC.
POWERTRAIN SERVICE
SHOP FURNITURE
FEATURES:
Installed and maintained by a local Authorized Dealer. Maximum installation flexibility for a non-disruptive shop footprint. More standard features than any other brand, including: on board air compressor, stainless steel heat exchanger, patented metering pump and low fuel cut off. Industrys longest warranty: 3 year warranty on parts and 10 years on the heat exchanger. EPA approved and UL Listed.
288-00005
ITEMS:
288-00023
STARTING & CHARGING SYSTEMS
288-00001 288-00002 288-00003 288-00004 288-00005 288-00006 288-00007 288-00008 288-00022 288-00023 288-00024
Call 1-800-ROTUNDA OPTION #2 FOR CUSTOM DESIGN AND PRICING ASSISTANCE. May not be available in all areas check with your local zoning ofcial.
140,000 BTU used oil furnace 200,000 BTU used oil furnace 340,000 BTU used oil furnace 200,000 BTU used oil boiler 375,000 BTU used oil boiler 499,000 BTU used oil boiler Class A ue kit 250 gallon workbench tank 140,000 BTU used oil furnace, 250 gallon workbench tank and Class A ue kit 200,000 BTU used oil furnace, 250 gallon workbench tank and Class A ue kit 340,000 BTU used oil furnace, 250 gallon workbench tank and Class A ue kit
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
7-13
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: kaBa ILCO CORPORaTION
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
011-00277
011-00282
TRI-CODE H.S.
Designed specically for the North American automotive key markets, the EZ Code is the answer to most key cutting requirements. Quite simply, the EZ Code is affordable, easy to use and loaded with features.
The Tri-Code High Security electronic machine duplicates and cuts by code the laser style high security automotive keys. Designed with features considered most important by the automotive dealers, this machine is easy to operate, fast, and accurate.
FEaTURES:
LIFTING EQUIPMENT
PARTS STORAGE
One machine electronically code cuts or duplicates with accuracy. No kits or adapters required. Machine is self-contained. Unique automatic self-calibration eliminates potential for operator error. All major North American and international manufacturers key codes are preloaded. Preloaded and expandable database can be updated with SD memory card or with PC via USB port. Key registration accounts for taper and position to allow for perfectly cut keys to OEM specifications.
FEaTURES:
POWERTRAIN SERVICE
ITEMS:
011-00277 EZ Code
Internal database of high security codes and specifications including the newly released code series for North American Ford products. Compensates for worn cuts by automatically adjusting to OEM original specifications. Delivers consistent, accurate and dependable results in less than 3 minutes. Unique three-position clamping eliminates the need for additional clamps. Fully updateable database via serial port and cable (supplied). Full three-year warranty for parts and labor (cutters not included). Instruction manual and video included.
ITEMS:
SHOP FURNITURE
011-00282
Tri-Code H.S.
MaTRIx S
The Matrix S provides fast, accurate duplicating of the laser style high security automotive keys.
VEHICLE DETAILING
FEaTURES:
VEHICLE DIAGNOSTICS
Ball bearing guides on three axis, ergonomic levers and electromechanical gauging system cuts accurately and easily. Lateral spring for sidewinder keys. Incorporated accessory pocket and machine illumination.
ITEMS:
WHEEL SERVICE
011-00281 Matrix S
011-00281
7-14
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: kaBa ILCO CORPORaTION
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
011-00283
011-00263
FACILITY
KEy DUPLICaTOR
The 011-00283 is the perfect basic key duplicator. Economical, accurate and simple to operate, the 011-00283 is loaded with useful features any user will readily appreciate. Dial-type adjustment system greatly simplies the process of adjusting cutting depth. Other features include four-way vise jaws, wide carriage spacing (accommodates longer keys than many models), titanium nitride-coated cutter for long life, nylon deburring brush permanently lubricated spindle shaft ball bearings and more!
ITEMS:
011-00283
Key duplicator
Dual function design, the 011-00263 will cut most automotive keys by duplication or by code using optional components. Economically priced code components make the 011-00263 a very affordable key cutting system with great exibility. Durable and accurate, the 011-00263 addresses the increased precision of todays newer automotive lock designs. Easy to operate; virtually anyone can cut accurate keys with minimal training! Equipped with four-way vise jaws, wide carriage spacing (accommodates longer keys than many machines) and nylon deburring brush.
FLUID HANDLING
ITEMS:
011-00263
LIFTING EQUIPMENT
Give your customers the convenience they deserve with the Nite Drop Zone. To drop off their vehicles, customers simply complete a convenient and familiar service envelope and drop it into the Nite Drop Zone Vault.
PARTS STORAGE
BENEfITS:
Provides the ability to improve your service revenue with your choice of weekly or monthly specials displayed in the envelope holder placard. Will increase customer loyalty with easy to understand decals that will walk your customers through the process, assuring a user friendly experience and satised customer. Will streamline your labor usage and minimize labor costs by allowing customers to drop off their vehicles for service after your service department closes. Has a no worry, theftproof design to ensure that once the envelope is deposited into the vault it cannot be removed without a key.
POWERTRAIN SERVICE
SHOP FURNITURE
FEaTURES:
Heavy-duty steel construction with durable powder coat finish. Convenient pull-down writing surface uses gas props to assist motion. Easy bolt-through-wall installation. All weather secured ballpoint pen. Dimensions: 22" h x 19" w x 12" d. Weight: 70 lbs. (UPS shippable).
VEHICLE DETAILING
ITEMS:
192-00071
VEHICLE DIAGNOSTICS
192-00071
7-15
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: BaRNES DISTRIBUTION
www.fordrotunda.com
COLLISION REFINISHING
2011
New for
COLLISION REPAIR
FACILITY
355-00002
FLUID HANDLING
355-00007
The most advanced High Security Code Cutter and Duplicator on the market designed specically for the automotive dealer.
The ONLY computerized code cutter and duplicator designed specically for the automotive dealer.
FEATURES:
LIFTING EQUIPMENT
FEATURES:
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
Cut a High-security key in 2-1/2 minutes! Time from vehicle selection with the touch screen to a completed key. Pre-loaded with codes for all vehicle makes and models available, allowing you to easily cut keys for both new and used cars! Touch screen display with easy to follow step-by step instructions making key cutting easy, even without training. Make/model/year lookup makes finding codes easy. Self calibrating The unit is always ready to cut, even when changing jaws or cutters which minimizes operator error. Optional -Store key code information by dealer entered VIN. (Manual VIN entry required by dealer.) Password protection All users can be assigned individual passwords for security. Receive vehicle code update information by internet. No computer required. 5 language options English, Spanish, French, German, Italian. Optional Automatic Run Clean vacuum system turns ON and OFF when the cutter starts and stops.
User Friendly. Pop-up menu displays step-by-step instructions. Make/Model/Year look-up. Codes stored electronically in unit. No extra parts or equipment needed. New code updates included for entire length of warranty. No special training required to cut a perfect key. Reliable. Proven cutting technology; over 11,000 units sold. All components backed by a by a full 3-year warranty. Virtually eliminates expensive miscut key blanks. Made in the U.S.A. and serviced by professionals. Safe. Enclosed cutting wheel. No flying chips.
ITEMS:
355-00007
ITEM:
STARTING & CHARGING SYSTEMS
355-00002
Built-in vacuum port allows for the attachment of an optional external vacuum system that will eliminate all shavings and chips. Allows the cutting surface to stay clear of chips, prolonging cutter life. Optional Cutter ON/Vacuum ON attachment.
VEHICLE DIAGNOSTICS
ITEM:
355-00001
7-16
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: STRaTTEC CORPORaTION
Models FORD Edge w/ power liftgate Edge w/o power liftgate Escape/Hybrid Escape/Hybrid Expedition Explorer F-Series Truck F-Series Super Duty 2007 12 2007 12 2012 2007 11 2009 11 2012 2011 12 2011 12 Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 3B IKT Ford 80 Bit Side Mill 3B IKT Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 3B IKT Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 3B IKT Ford 80 Bit (SA) 4B IKT Remote Start Ford 80 Bit (SA) 3B IKT Ford 80 Bit (SA) 4B IKT Remote Start Fork/Blade (Uncut) Fork/Blade (Cut) Transponder Key (Uncut) Fiesta 2011 12 Transponder Key (Cut) Side Mill Backup (Uncut) Side Mill Backup (Cut) 3B FOB Transmitter PEPS Fob Flex w/ power liftgate Flex w/o power liftgate Focus Focus Fusion Mustang Mustang Ranger Taurus Taurus X w/ power liftgate Taurus X w/ power liftgate Taurus X w/o power liftgate Taurus X w/o power liftgate 2009 12 2009 12 2012 2008 11 2006 12 2012 2010 12 2011 12 2008 12 2008 09 2008 09 2008 09 2008 09 Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 3B IKT Ford 80 Bit Side Mill 4B IKT Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 4B IKT Boss 80 Bit Track 4B IKT Boss 80 Bit Main 4B IKT Pony Logo 80 Bit 4B IKT Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 3B IKT Ford 80 Bit (SA) 4B IKT Ford 80 Bit (SA) 4B IKT Ford 40 Bit 4B IKT Ford 80 Bit (SA) 3B IKT Ford 40 Bit 3B IKT Ford TIBBE Non Transponder (Uncut) Ford TIBBE Non Transponder (Cut) Ford TIBBE Fork/Blade (Uncut) Transit Connect 2012 Ford TIBBE Fork/Blade (Cut) Ford TIBBE Transponder (Uncut) Ford TIBBE Transponder (Cut) 3B FOB Transmitter LINCOLN Mark LT MKS MKT MKX w/ power liftgate MKX w/o power liftgate MKZ/Zephyr Navigator MERCURY Mariner Milan Sable/Montego 2007 11 2006 11 2008 09 Mercury 80 Bit (HA) 4B IKT Mercury 80 Bit (HA) 4B IKT Mercury 40 Bit 4B IKT 164-R7041 164-R7041 164-R8014 2011 12 2009 12 2010 12 2007 12 2006 12 2006 10 2009 11 Lincoln 80 Bit (SA) 3B IKT Lincoln 80 Bit (SA) 4B IKT Remote Start Lincoln 80 Bit (SA) 4B IKT Remote Start Lincoln 80 Bit (SA) 4B IKT Remote Start Lincoln 80 Bit (SA) 5B IKT Remote Start Lincoln 80 Bit (SA) 3B IKT Lincoln 80 Bit (SA) 5B IKT Remote Start Lincoln 80 Bit (SA) 4B IKT Remote Start 164-R8076 164-R8064 164-R8064 164-R8064 164-R8056 164-R8076 164-R8056 164-R8064 164-R8073 164-R8070 164-R8007 164-R8073 164-R8073 164-R8070 164-R8073 164-R8070 164-R8067 164-R8070 164-R8067 164-R8043 164-R8044 164-R8062 164-R8063 164-R8045 164-R8090 164-R8042 164-R8048 164-R8073 164-R8070 164-R8046 164-R8073 164-R8073 164-R8021 164-R8020 164-R8087 164-R8073 164-R8070 164-R8073 164-R8073 164-R8013 164-R8070 164-R8016 164-R8028 164-R8029 164-R8039 164-R8038 164-R8051 164-R8052 164-R8042 Model Years Key Style Ignition/Door
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
fOR aPPLICaTIONS TO aLL ThE fORD, LINCOLN aND MERCURy VEhICLES PLEaSE SEE www.fORDROTUNDa.COM
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
7-17
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: NU-STaR, INC.
www.fordrotunda.com
SUPPLIED By: aMERICaN aIMERS
COLLISION REFINISHING
COLLISION REPAIR
144-00003
FACILITY
144-00050
FEaTURES:
Requires only (2) people (1) to operate the Power Pusher and (1) to steer the vehicle. Built-in fully automatic battery charger which plugs into 115 volt outlet. Ability to push up to (100) cars per charge. Electronic forward and reverse. The rubber covered bumper pad will not mark or damage plastic bumpers. Variable speed controller, continuous-duty motor. Push capacity of 18,000 lb. up a 5% grade.
LIFTING EQUIPMENT
ITEMS:
PARTS STORAGE
* Unit requires (2) 12 volt batteries Rotunda Item #144-00013. NOTE: If you have drive-on lifts, please request our low gearing package at no additional charge.
325-00001
POWERTRAIN SERVICE
MfC CaRT
FEaTURES:
Heavy-duty construction. Can handle most vehicles up to 4,000 lbs. Attaches easily to vehicle. Fingertip controls. Operator panel houses switches controlling the (2) speeds, direction and horn. Turns at nearly right angles. (2) 12 volt deep cycle batteries (included) provide 24 volts power to the electric/hydraulic system. Built-in fully automatic battery charger which plugs into 115 volt outlet. Optional crane lift has a lifting capacity of 750 lbs. and a vertical lift of 8'. Optional utility table for holding or moving large awkward parts. Optional jumper cable set turns MFC Cart into a mobile starting unit.
SHOP FURNITURE
ITEMS:
VEHICLE DETAILING
aLSO aVaILaBLE:
VEHICLE DIAGNOSTICS
ITEMS:
144-00050
MFC Cart
7-18
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: BETTER ENGINEERING
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
178-00006
LIFTING EQUIPMENT
SPECIfICaTIONS:
PARTS STORAGE
Inside height: 36" Inside turntable diameter: 27" Inside turntable area: 575 sq. in. Overall dimensions: 44" w x 47" d x 65" h Tank size: 65 gallons Turntable capacity: 750 lbs. Power source: 220 volts, 1 phase Full load: 41 amps Pump motor type: vertical Pump motor size: 3 hp Pump motor output: 60 g.p.m./45 p.s.i. Electric heat source: 9 kW Heat-up time: 1-1/4 hour
POWERTRAIN SERVICE
SHOP FURNITURE
ITEMS:
powerful wash cabinets effectively clean blocks, transmission cases and components in 10 30 minutes
VEHICLE DETAILING
ACCESSORIES:
178-00051 Timer and control heat and oil skimmer 178-00052 Low water shutoff and fill 178-00056 Hand brush
VEHICLE DIAGNOSTICS
7-19
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: aLL aMERICaN
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
Wall mounted medium-duty pressure washer complete with 25' high pressure hose with shut-off gun, stainless steel enclosure and adjustable detergent control. Compact high-quality pressure washer for detail and car wash bays.
FEaTURES:
FLUID HANDLING
Triplex plunger pump. Stainless steel enclosure. 25' high pressure hose. Adjustable detergent control. 24" wand. 160 degree inlet water temperature.
FEaTURES:
ITEMS:
333-00001 333-00002
Wall-mount, 2 hp, 115 volts, 1 phase Wall-mount, 4 hp, 230 volts, 1 phase
Powder-coated frame. Triplex plunger pump. Detergent injector. EZ pull starting. 50' high pressure hose. 36" wand with shut-off gun.
LIFTING EQUIPMENT
ITEMS:
333-00005 333-00006 333-00007 333-00008
Portable gas powered medium-duty, 5 hp Portable gas powered heavy-duty, 5.5 hp Portable gas powered heavy-duty, 9 hp Portable gas powered heavy-duty, 11 hp
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
Portable hot water pressure washer mounted on a four wheel cart. Stainless steel coil wrap, oil-red burner, 4 gallon fuel tank, (4) quick change color coded spray tips, pneumatic tires and 50' of high pressure hose with spray wand. Durable long lasting portable pressure washer for all cleaning applications.
FEaTURES:
STARTING & CHARGING SYSTEMS
VEHICLE DETAILING
Heavy-duty roll cage with lifting bar. Stainless steel coil wrap and control panel. Heavy-duty triplex plunger oil bath pump. Corrosion proof fuel tank. Pneumatic tube wheels. Detergent injector. 50' high pressure hose with quick disconnects. Four color coded quick change spray nozzles. Dual lance wand for variable pressure.
Portable medium-duty pressure washer complete with 25' high pressure hose with shut-off gun, two wheel cart and handle and adjustable detergent control. Compact high quality pressure washer for detail and car wash bays.
FEaTURES:
Triplex plunger pump. Two wheel frame. 25' high pressure hose. Detergent injector. 24" wand.
ITEMS:
VEHICLE DIAGNOSTICS
ITEMS:
333-00003 333-00004
Portable electric, 2 hp, 115 volts Portable electric, 4 hp, 115 volts
7-20
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: aLL aMERICaN
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
Mobile cold water pressure washer trailer mounted on a two wheel trailer chassis. Honda 5.5 hp gas engine power washer delivers 3.0 g.p.m. at 2,000 p.s.i. 100 gallon water tank, detergent injector heavy-duty locking hose reel and 50' high pressure hose with 24" wand and shut-off gun are standard features. Quick and easy washing of lot vehicles, parking lots and buildings.
FACILITY
FEaTURES:
FLUID HANDLING
15" chrome wheels. 2" ball receiver. Swing up wheel jack. Powder coated frame for rust protection. Heavy-duty triplex plunger pump. Inlet pump filter.
ITEMS:
333-00014
Allows for fast on site cleaning of engine and transmission parts and components. 208 240 volts, single phase front loading parts washer cabinet with 30" diameter brush drive turntable and 43" maximum working height. Pump capacity of 50 g.p.m. at 16 p.s.i. Stainless steel oil skimmer, 200 degree thermostat and 60 minute wash timer are standard equipment. Maximum load capacity 750 lbs.
FEaTURES:
LIFTING EQUIPMENT
30" turntable diameter. 43" working height. 18 spray nozzles. Debris screen. Stainless steel disc style oil skimmer. 14 gauge cabinet and tank. 750 lb. load capacity.
PARTS STORAGE
Mobile hot water pressure washer trailer mounted on a two wheel trailer chassis. 200 gallon water tank, detergent injector heavyduty locking hose reel and 50' high pressure hose with 42" wand and shut-off gun are standard features. Oil red water heater with cool touch coil system. Quick and easy washing of lot vehicles, parking lots and buildings.
ITEMS:
333-00012
POWERTRAIN SERVICE
FEaTURES:
15" chrome wheels. 2" ball receiver. Swing up wheel jack. Stainless steel coil wrap and control panel. Four quick change spray nozzles. Belt driven triplex plunger pump. Adjustable high pressure detergent. 8 gallon fuel oil tank.
Provides rapid on site cleaning of engine components and blocks as well as transmission parts and cases. 240 480 volts, three phase front loading parts washer cabinet with 36" diameter gear drive turntable and 43" maximum working height. Pump capacity of 150 g.p.m. at 55 p.s.i. Stainless steel oil skimmer, 200 degree thermostat and 60 minute wash timer are standard equipment. Maximum load capacity 3,500 lbs.
SHOP FURNITURE
FEaTURES:
ITEMS:
333-00015 333-00016
Trailer mounted hot water pressure washer on trailer, Honda 9 hp, 3.0 g.p.m. @ 3,000 p.s.i. Trailer mounted hot water pressure washer on trailer, Honda 11 hp, 4.0 g.p.m. @ 3,000 p.s.i.
36" turntable diameter. 43" working height. 26 spray nozzles. Debris screen. Stainless steel disc style oil skimmer. 12 gauge cabinet and tank. 3,500 lb. load capacity.
VEHICLE DETAILING
ITEMS:
333-00013
VEHICLE DIAGNOSTICS
7-21
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: aLL aMERICaN
www.fordrotunda.com
Cold Water Pressure Washers Item # 333-00001 333-00002 333-00003 333-00004 g.p.m. 2 3 2 2.8 p.s.i. 1,500 2,000 1,200 2,000 Motor Type 2 hp electric 4 hp electric 2 hp electric 4 hp electric Motor Specs 115 volt/1 phase/20 amp 230 volt /1 phase/20 amp 115 volt /1 phase/20 amp 230 volt/1 phase/20 amp Weight 90 lbs. 120 lbs. 90 lbs. 100 lbs. Wall-Mount Medium-Duty Cold Water Electric Pressure Washers
COLLISION REPAIR
FACILITY
Portable Gas Powered Cold Water Pressure Washers Medium-Duty 333-00005 2.5 3 3 4 g.p.m. 2 3 4 4 2,000 2,000 3,000 3,000 p.s.i. 1,500 2,000 3,000 2,300 5 hp gasoline 5.5 hp gasoline 9 hp gasoline 11 hp gasoline Motor Type 2 hp electric 4 hp electric 11 hp gasoline 6 hp electric Honda Honda Honda Honda Motor Specs 115 volt /1 phase/20 amp 230 volt /1 phase/20 amp Honda 220 volt /1 phase/25 amp 100 lbs. 120 lbs. 155 lbs. 175 lbs. Weight 450 lbs. 450 lbs. 590 lbs. 815 lbs. Burner Oil red Oil red Oil red Natural gas Heavy-Duty 333-00006 333-00007 333-00008
FLUID HANDLING
Portable Hot Water Pressure Washers Item # 333-00009 333-00010 333-00011 333-00017
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
Mobile cold water pressure washer trailer that can be mounted on a trailer or the bed of a pickup truck. Honda 5.5 hp gas engine power washer delivers 3.0 g.p.m at 2,000 p.s.i. 100 gallon water tank, detergent injector heavy-duty locking hose reel and 50' high pressure hose with 24" wand and shut-off gun are standard features. Quick and easy washing of lot vehicles, parking lots and buildings.
SHOP FURNITURE
ITEMS:
333-00018
VEHICLE DETAILING
This hot water pressure washer provides quiet, efcient cleaning in detail bays. The 6 hp, 220 volt motor delivers 4 g.p.m. at 2,300 p.s.i. Standard features include heavy-duty frame with stainless steel panels, stainless steel coil wrap, adjustable temperature control, high pressure detergent injector, 50' high pressure hose with quick disconnects, 42" wand and shut-off gun and four color coded quick change spray nozzles.
ITEMS:
333-00017
VEHICLE DIAGNOSTICS
333-00017
WHEEL SERVICE
7-22
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED By: ENERGyLOGIC
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
HVLS FaNS
Reduce energy costs in every season. Experience a 20% drop in cooling and heating costs with high velocity, low speed industrial fans. HVLS fans gently move large amounts of air using small amounts of energy and create a comfortable environment. Fan diameters range from 8' 24' and multiple motor congurations are available for most models.
MaxAir XL For the largest spaces, one 24', 2 hp MaxAir fan generates 375,000 c.f.m. and covers approximately 20,000 sq.-ft. The cost to run this fan for eight hours is about one dollar. Available in two diameters (20', 24') with three motor configurations (240 volt, 1 phase; 240 volt, 3 phase or 480 volt, 3 phase). MacroVoltaic The worlds only 100% solar powered fan. Available in three diameters (16', 18' or 20'). Includes an attached controller, a specialized component that converts power from the solar panels, standard remote control and an optional auxiliary power supply.
LIFTING EQUIPMENT
fEaTURES:
Six blades move more air than the old style, 10 blade fans Forward, reverse, variable speed standard. Anodized blades, custom colors, logos available. EMI Compliant. 12 year service life warranty.
PARTS STORAGE
ALSO AVaILaBLE:
288-00021
Airvolution XL Eliminates multiple shop fans, costs pennies to operate. Available in various diameters (8', 10', 12', 14', 16', 18', 20', 24') with four motor configurations (120 volt; 240 volt, 1 phase; 240 volt, 3 phase or 480 volt, 3 phase) Spec-1 Low-cost and preset for optimal speed, air movement and efciency. Available in three diameters (16', 18' or 20') with one motor conguration (240 volt, 3 phase).
POWERTRAIN SERVICE
SHOP FURNITURE
EnergyLogic has additional fans available. Visit www.fordrotunda.com or call 1-800-ROTUNDA, option #2 for items and pricing.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
7-23
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
7-24
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
TWO-POST LIFTS
Engineered for Productivity For decades, Rotary has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market. We focus on vehicle service needs to improve productivity in the bay. We have expanded the line of two-post lift products to meet these needs.
COLLISION REFINISHING
FEATURES:
COLLISION REPAIR
Double-S column design with single-piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing. Slider block bearings of Tivar 1000 polyethylene are self-lubricating and maintenance free. High-pressure cylinders in each column provide maximum lifting force and smooth operation. Arm restraints engage when the lift is raised and automatically disengage when the lift is fully lowered. Extended heights for taller vehicles are available.
FACILITY
FLUID HANDLING
LIFT COlUMN ORIENTATION OpTIONS: TRUE SYMMETRIcAl LIFTS (SPO/S SERIES 10,000 18,000 lBS.)
Columns are rotated 30, placing the approximate center of gravity of the vehicle in line with the optimum load capability of the column.
DUAl cONTROlS
One-touch controls on each column. Power unit up and out of the way. OSHA compliant lockable disconnect switch. Integrated air and electric hook-ups.
PARTS STORAGE
POWERTRAIN SERVICE
The three-stage arm increases overall arm sweep and minimum arm reach for hard to lift pickup points.
138-04369
138-04374 138-04389 138-00085
138-04388
138-04411
1/2" rubber pad adapter to protect new car undercoating. 1" rubber pad adapter to protect new car undercoating. Frame engaging adapter for three-stage arms. Additional height extensions for RA lifts. 14-3/8" adapter to provide additional clearance when lifting trucks and vans. 17-3/8" adapter to provide additional clearance when lifting trucks and vans. Universal cab hold down strap kit for performing heavy engine repairs on 2008 and newer Super- Duty trucks.
SHOP FURNITURE
Two-Stage Arms.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
138-00086
138-04369
138-04374
138-04389
138-00085
138-04388
138-04411
WHEEL SERVICE
8-1
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
11' 8-1/2" (3569 mm) 11' 5-1/2" (3493 mm) 95-1/4" (2416 mm) 20-1/2" (521 mm) 40-3/4" (1036 mm) 40-1/4" (1019 mm) 61" (1548 mm) 4-3/4" (121 mm) 21-5/8" (550 mm) 43-1/2" (1106 mm) 34-1/2" (878 mm) 58" (1474 mm) 3-5/8" (93 mm) 102-1/2" (2603 mm) 31" (787 mm) 54" (1372 mm) 31" (787 mm) 54" (1372 mm) 4-3/4" (121 mm) 27-1/2" (699 mm) 59" (1499 mm) 27-1/2" (699 mm) 59" (1499 mm) 4-3/4 7-1/4" (121184 mm)
FACILITY
Dirve-thru clearance Reach (front arm minimum) Reach (front arm maximum)
FLUID HANDLING
Reach (rear arm minimum) Reach (rear arm maximum) Minimun adapter height
10,000 lbs. (4536 kg) 12' 4-3/4" (3778 mm) 11' 10-3/4" (3626 mm) 208/230 volt 12' (3658 mm) 2,500 lbs. (1134 kg)
LIFTING EQUIPMENT
138-04458 138-04439
80-1/4" (2059 mm) 83-1/4" (2135 mm) 13' 8" (4166 mm)
138-04465
80-1/4" (2038 mm) 83-1/4" (2135 mm) 11' 8" (3569 mm)
138-04249 138-00170
89-1/2" (2273 mm) Adj. 15' 16' 6" (4572-5029 mm)
138-04251 138-00174
89-1/2" (2273 mm) Adj. 15' 16' 6" (4572-5029 mm)
POWERTRAIN SERVICE
Width overall** (outside of base plate) Dirve-thru clearance Reach (front arm minimum)
11' 5-5/8" (3496 mm) 102-3/8" (2600 mm) 27-1/2" (699 mm) 59" (1499 mm) 27-1/2" (699 mm) 59" (1499 mm) 4-3/4 7-1/4" (121184 mm) 12,000 lbs. (5443 kg)
12' 11" (3937 mm) 105-3/4" (2686 mm) 37-1/2" (952 mm) 62" (1574 mm) 37-1/2" (952 mm) 62" (1574 mm) Adj. 5-3/4 7-1/2" (146-190 mm) 15,000 lbs. (6804 kg) 208/230 volt 18,000 lbs. (8165 kg)
SHOP FURNITURE
Reach (front arm maximum) Reach (rear arm minimum) Reach (rear arm maximum)
Minimum adapter height Lifting capacity Voltage single phase Ceiling height required
15' 1" min. (4597 mm) 3,750 lbs. (1700 kg) 4,500 lbs. (2041 kg)
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
Rise is measured with adapter in highest position. Cylinder height is greater than overall lift height on standard 10,000 lb. models. The higher rise must be ordered as an option at additional cost. ** Overall heights and widths reflect standard settings. Alternate settings may be available. Optional 3 phase electrical is available at the time of ordering. Additional 110 volt circuit drop required for dual control model lifts. The recommended ceiling height listed applies to standard models. Additional clearance will be needed for extended height models.
WHEEL SERVICE
8-2
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUpplIED BY: ROTARY LIFT
Wider drive-thru clearance with lower profile. Shorter arms also have longer reach. 18% more reach than before! System is completely enclosed to protect components and the environment and uses only 15 quarts of fluid. Engineered for serviceability-all internal components are accessible and can be serviced or replaced at floor level. Patented Easy Access cylinder can reduce repair time by as much as 75%. Patented locking system features stainless steel construction for maximum corrosion resistance. Models 138-04487 and 138-04488 feature patented (US Patent No. 6,814,187) Liquid Detection System (LDS). Notifies the user when fluid is accumulating in the containment housing. 8-1/2" diameter pistons for more stability when vehicle is on the lift.
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
For lifting vehicles via the frame and needed for use with RA lift models 138-04488 and 138-04490.
ADApTER kIT
LIFTING EQUIPMENT
ITEMS:
138-04493 138-04494
PARTS STORAGE
POWERTRAIN SERVICE
POlYMER pAD ADApTERS cOME STANDARD WITH RA lIFTS (ITEM #138-04488 AND 138-04490)
Vertically adjustable, and protect vehicle undercoatings by avoiding metal-to-metal contact.
SHOP FURNITURE
VEHICLE DETAILING
Integrated third-stage adapter adjustment easily slides to a pinpoint location. Available on 138-04488 and 138-04490, only on 138-04488 and 138-04490.
VEHICLE DIAGNOSTICS
8-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
A. B. C. D. E. F. G. H. I. L.
Rise* Width overall Drive-thru clearance Arm reach (min.) Arm reach (max.) Arm reach (overall min.) Arm reach (overall max.) Min. adapter height Low-step height High-step height Lifting capacity overall Lifting capacity (per arm) Guide plunger diameter Motor Voltage single phase Electrical usage Time to full rise 1/3 Minimum bay size
81" (2057 mm) 88" (2235 mm) 21-3/8" (543 mm) 44-3/8" (1127 mm) 59-1/2" (1511 mm) 105-1/2" (2680 mm) 4-1/4" (108 mm) 6-1/2" (165 mm) 10-1/2" (266 mm)
75-7/8" (1927 mm) 108-7/8" (2765 mm) 19" (483 mm) 41-3/4" (1060 mm) 54-3/4" (1390 mm) 100-3/8" (2549 mm) 3-5/8" (92 mm)** N/A 4-7/8" (124 mm)**
PARTS STORAGE
POWERTRAIN SERVICE
10,000 lbs. (4536 kg) 2,500 lbs. (1134 kg) 8-1/2" (216 mm) 2 hp 208/230 .01kWh per cycle 45 seconds/35 seconds 11' x 24' (3353 x 7315 mm)
SHOP FURNITURE
VEHICLE DETAILING
* Rise is measured with adapter in highest position. ** Measured to top of adapter rubber pad. Optional 3 phase electric available.
VEHICLE DIAGNOSTICS
WHEEL SERVICE
8-4
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
System is completely enclosed to protect the lift components and the environment and uses only 15 quarts of fluid. Engineered for service: all internal components are accessible and can be serviced or replaced at floor level. Patented Easy Access cylinder can reduce repair time by as much as 75%. Patented locking system features stainless steel construction for maximum corrosion resistance. Optional patented (US Patent No. 6,814,187) Liquid Detection System (LDS) notifies user when fluid is gathering in the containment housing. In addition to the LDS, inbay models include one-touch lift controls (versus two-handed operation on standard models) and optional mounting/location options (wall-mounted, pedestal-mounted, or workbench-mounted). 8-1/2" diameter pistons for more stability when vehicle is on the lift.
LIFTING EQUIPMENT
ITEMS:
138-04273
PARTS STORAGE
SHOP FURNITURE
ITEMS:
138-04448 138-04449
8,000 lb. in-ground lift with moveable pads 8,000 lb. in-ground lift with moveable pads and inbay controls
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
8-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
Rise* Width overall Drive-thru clearance Width between supports Reach (minimum) Reach (maximum) Reach (overall arm minimum) Reach (overall arm maximum) Platform width Minimum adapter height Low step height High step height Lifting capacity overall Lifting capacity (per arm/pad) Guide plunger diameter
73-3/8" (1864 mm) 78-1/4" (1987 mm) N/A 36-3/4" (934 mm) 29-3/4" (756 mm) 74-3/4" (1898 mm) N/A N/A 20" (508 mm) 2-3/8" (60 mm) N/A N/A 8,000 lbs. (3629 kg) 2,000 lbs. (907 kg) 8-1/2" (216 mm) 2 hp
84-1/4" (2140 mm) 98-1/2" (2502 mm) 88" (2235 mm) N/A 31-1/2" (800 mm) 48" (1219 mm) 77" (1956 mm) 110" (2794 mm) N/A 5-1/4" (133 mm) 9-1/4" (235 mm)** 13-1/4" (337 mm)** 12,000 lbs. (5443 kg) 3,000 lbs. (1361 kg)
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
208/230 .01 kWh per cycle 45 seconds/35 seconds 11' x 24' (3353 x 7315 mm) 54 seconds/42 seconds 12' x 26' (3658 x 7925 mm)
PARTS STORAGE
* Rise is measured with adapter in highest position. ** Measured to top of adapter rubber pad. Optional 3 phase electric available.
POWERTRAIN SERVICE
When building a new facility, the future kit allows you to install a containment housing to account for future additional service bays. It prevents the need to break the concrete at a later date to add additional lifts, while avoiding the complete-lift costs on the initial lift purchase. When the time comes to add more lifts, there is a containment housing in place and the additional components may be installed whenever the time is right.
SplIT SHIpMENTS:
Smartlifts are usually installed during new construction and usually installed in two phases. The in-ground portion must be installed prior to the concrete floor being poured, while the lift arms and the controls are generally installed at a later date. To avoid the lift arms and controls being stored on a construction site and perhaps exposed to the elements, Rotary can hold them at their facility until the site is ready. This is referred to as a split shipment and there will be additional charges for the extra handling the order will require.
ITEMS:
VEHICLE DETAILING
138-04409
Future Kit
VEHICLE DIAGNOSTICS
WHEEL SERVICE
8-6
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
FOUR-POST LIFTS
Our four-post surface lifts accommodate a wide range of vehicles. Routine vehicle servicing and maintenance with a Rotary standard four-post lift is just the ticket. Move beyond the basics and the flexibility becomes apparent as you pick from a list of optional equipment. Lube work is made easy when a rolling drain pan with splash guard, drain valve and dust cap is added. Bolt-on alignment kits include a turning radius gauge kit (front), slip plate kit (rear only on SM18 series) and all necessary hardware.
COLLISION REFINISHING
COLLISION REPAIR
FEATURES:
14,000, 18,000 and 30,000 lb. capacities available. 14,000 lb. capacity lifts are available in open front or rear design allowing for greater access to under vehicle components and rolling jack usage. Patented Sentinel Lock system (US Patent No. 6,446,757) slack cable guide arm that stays on guard to manage the lock latch. 14,000 and 18,000 lb. capacity lifts come with an air filter/regulator/lubricator to extend the life of your lift and air powered tools. Adjustable latch bars ensure the runways are level when resting on the locks at any of the locking positions. Available in multiple runway lengths for various wheelbases. Non-skid surface allows sure grip of tires and a sure foot for technicians standing on the lift. Non-welded runway for strength, durability and to provide a smooth track for rolling jacks. Cylinder located under the runway to eliminate any opportunity for vehicle door or mirror damage. Third party ALI Certified, tested by ETL to meet or exceed strict ANSI standards and go through rigorous safety tests such as a 1.5 times rated capacity load test, lock test by cutting the cables and deformation tests.
FACILITY
FLUID HANDLING
138-04387 138-04384
LIFTING EQUIPMENT
PARTS STORAGE
OpTIONAl AccESSORIES:
138-04428 138-00535 138-04313 138-00527 138-04387 138-04368 138-04384
7,000 lb. capacity rolling jack. 15,000 lb. capacity rolling jack. 9,000 lb. capacity rolling jack. Portable work step. Low profile oil drain pan with 30 gallon capacity. Extended ramp kits for drive-thru service. Air/Electric utility box with air filter/regulator/ lubricator. 138-00533 Internal air line kit for rolling jack connection. 138-04365 6,000 lb. capacity swing air jack.
138-04368
POWERTRAIN SERVICE
SHOP FURNITURE
138-00533
VEHICLE DETAILING
138-04428
138-00535
138-04365
138-00527
VEHICLE DIAGNOSTICS
8-7
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
FOUR-pOST lIFTS
ITEMS AND SpEcIFIcATIONS:
LIFTING EQUIPMENT
138-04416 138-04417 138-04429 Open 158-1/2" (4026 mm) 192-1/2" (4890 mm) 212-1/2" (5397 mm)
PARTS STORAGE
73-3/4" (1873 mm) 19' 2" (5842 mm) 22' (6706 mm) 23' 8" (7214 mm) 11' 7" (3531 mm) 18' 9" (5715 mm) 20' 9" (6325 mm) 22' 9" (6934 mm) 11' 1" (3378 mm)
68" (1727 mm) 22' 11-3/16" (6990 mm) 25' 11-3/16" (7904 mm) 11' 5-3/4" (3499 mm) 121-1/2" (3086 mm) 212" (5385 mm) 248" (6299 mm) 6' 5-3/4" (1975 mm) 22" (559 mm) 7-1/2" (191 mm) 25' 8-1/8" (7826 mm) 28' 8-1/8" (8741 mm) 31' 8-1/8" (9655 mm) 12' 4-13/16" (3780 mm) 132" (3353 mm) 249" (6325 mm) 285" (7239 mm) 321" (8153 mm) 7' 3/4" (2153 mm) 24" (610 mm) 8-3/8" (213 mm) 41" (1041 mm) 46" (1168 mm) 18,000 lbs. (8165 kg) 208/230 volt 48" (1219 mm) 30,000 lbs. (13608 kg) 4 hp 100 seconds 16' x 27' (4877 x 8230 mm) 16' x 30' (4877 x 9144 mm) 105 seconds 16' x 30' (4877 x 9144 mm) 16' x 33' (4877 x 10059 mm) 16' x 36' (4577 x 10973 mm)
POWERTRAIN SERVICE
117-1/2" (2985 mm) 171" (4343 mm) 205" (5207 mm) 225" (5715 mm) 7' 11-3/16" (2418 mm) 171-7/8" (4366 mm) 195-7/8" (4975 mm) 219-7/8" (5585 mm) 6' 10-1/8" (2086 mm)
SHOP FURNITURE
Height of columns Width of runways Height of runways Width between runways (minimum)
20" (508 mm) 7" (178 mm) 43" (1092 mm) N/A 14,000 lbs. (6350 kg) 2 hp 65 seconds 15' x 23' (4572 x 7010 mm) 15' x 26' (4572 x 7925 mm) 15' x 28' (4572 x 8534 mm) 55 seconds 15' x 23' (4572 x 7010 mm) 15' x 25' (4572 x 7620 mm) 15' x 27' (4572 x 8230 mm)
Width between runways (maximum) Lifting capacity Motor Voltage single phase Time of full rise
VEHICLE DETAILING
Minimum bay size
VEHICLE DIAGNOSTICS
* Maximum wheelbase is based on a tire diameter of 29-1/2" (749 mm). ** Overall widths reflect standard settings. Alternate settings may be available. Length overall is 8" shorter and width overall is 8" wider with power unit mounted on the side of the column (14,000 lb. capacity lifts).
WHEEL SERVICE
8-8
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: ROTARY LIFT
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
Unlike a parallelogram, the Y12 provides true up/down lifting. There is no forward or rearward movement reducing valuable bay space.
PARTS STORAGE
POWERTRAIN SERVICE
12,000 lbs. (5,444 kg) 68-3/16" (1,732 mm) 260" (6,604 mm) 202" (5,131 mm) 179-1/2" (4,559 mm) 270" (6,858 mm) 212" (5,385 mm) 189-1/2" (4,813 mm) 88" (2,236 mm)
24" (609 mm) 11-3/16" (285 mm) 40" 37 seconds 45 seconds 208/230 volt
VEHICLE DIAGNOSTICS VEHICLE DETAILING
* Optional 3 phase power available for additional charge. ** Raising and lowering speeds vary with voltage and weight of vehicle.
8-9
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: CHAllENGER LIFTS
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
223-00440 12,000 lb. capacity Four-Post Lift (shown with optional 6,000 lb. capacity rolling jacks). 223-00446* Max Plus Productivity Solution Versymmetric Two-Post with 3-stage front and 3-stage rear arms, dual pendant power controls, document holder and 223-00400 stack adapter kit.
FACILITY
223-00398 Versymmetric Two-Post with 3-stage front and 3-stage rear arms.
TWO-POST LIFTS
ITEMS AND SpEcIFIcATIONS:
Item # 223-00398/223-00446 10,000 lbs. 75-1/8" 11' 8" 11' 6-1/2" or 11' 11" 100-1/2" or 2" 105" 11' 2-1/2" 19-13/16"/42" 37-5/8"/60" adj. 3-7/8" 7-1/8" 6-7/8" 10-1/8" 9-7/8" 13-1/8" 223-00448 12,000 lbs. 78-1/8" 13' 10" or 14' 7" 11' 7-3/4" 103" 13' 3-1/2" or 14' 1/2" 35-3/4" 54-1/2" adj. 5-1/4" 7-1/4" 8-1/4" 10-1/4" 11-1/4" 13-1/4" 2 hp/208 230 volt 48 seconds 2,500 lbs. 12' 66 seconds 3,000 lbs. 13' 11" or 14' 8" 3,750 lbs. 14' 7" 223-00192 15,000 lbs. 85-1/2" N/A 12' 10-3/4" 106-3/4" 13" 11" 38-1/2"/62" 38-1/2"/62" adj. 6-1/4" 8-1/2" 10-1/4" 12-1/2" 14-1/4" 16-1/2" 3 hp/208 230 volt 80 seconds 4,500 lbs. 223-00361 18,000 lbs.
FLUID HANDLING
Lifting capacity Rise height Column height Adjustable width overall Drive-thru clearance Floor to overhead switch Front arm reach (minimum/ maximum) Rear arm reach (minimum/ maximum) Screw pad height with short adapter* with tall adapter* Motor/voltage Speed of rise Maximum load per arm Ceiling height required
The 12,000 lb. capacity Four-Post Lift from Challenger is loaded with features like louvered approach ramps, solid piece column construction and automatic wheel stops.
LIFTING EQUIPMENT
PARTS STORAGE
Rise height Length overall Width overall Inside columns Between columns
POWERTRAIN SERVICE
Height of columns Width of runways Height of runways Width between runways (minimum/maximum) Air supply required Motor Voltage (single phase std.) **
Cylinder strokes to 11' 11". Frame engaging adapters (223-00445 or 223-00443) are required when lifting vehicles with frame construction. All Challenger 12,000 lb. capacity and higher two-post lifts include Stack Adapters and Frame Engaging Adapters.
* Short and tall adapters are optional for 223-00398. NOTE: 2' and 3' height extensions available. Single phase standard, optional 3 phase electrical available; please specify at time of order.
SHOP FURNITURE
AccESSORIES:
VEHICLE DETAILING
(4) 3" stack adapters; (2) 6" stack adapters and (2) organizer racks. Included with 223-00446* * Maximum wheelbase is based on a tire 223-00248 Air/electric workstation with filter/lubricator/regulator diameter of 30". ** Optional 3 phase electrical also available; 223-00443 Frame engaging adapters please specify at time of order.
OpTIONAl AccESSORIES:
223-00399 223-00320 223-00411
VEHICLE DIAGNOSTICS
6,000 lbs. rolling jack. Internal air line kit. Air/electric workstation. 223-00443 223-00400 223-00248
WHEEL SERVICE
8-10
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: CHAllENGER LIFTS
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
223-00464 Traditional electric/oil hydraulic In-ground Lift, 10,000 lb. capacity. 223-00442 AquaVantage Air and Water operated In-ground Lift, 3-stage front and rear arms, 10,000 lb. lifting capacity with 200 p.s.i.
FACILITY
Ready to go realGREEN or interested in LEED Certification? The 22300442 runs on tap water and your air compressor. It has no electrical motors or high-pressure cylinders that might fail, requires less maintenance and has a lower cost of ownership than traditional electric/hydraulic in-ground lifts.
FLUID HANDLING
The exclusive 15,000 lb. in-ground lift features heavy-duty arms and drive over operation. Perfect for heavier utility trucks and fleet operations. 12,000 and 15,000 lb. in-ground lifts include Stack Adapters and Frame Engaging Adapters.
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
75 125 p.s.i. 82" plus height of tallest vehicle 85" plus height of tallest vehicle
* 223-00393 specifications are listed without rubber pad; for measurements with rubber pad add 1/4". 223-00442 specifications are listed without rubber pad; for measurement with rubber pad add 1/4". ** Optional 3 phase electrical also available; please specify at time of order. 10,000 lb. capacity with 200 p.s.i.
NOTE: Optional frame engaging adapters (223-00445 or 223-00443) are
STAYDRY 223-00392 Automatically displaces condensation from tub bottom when lift is lowered. Prolongs the life of the in-ground lift and its hydraulic components.
SHOP FURNITURE
REQUIRED when lifting vehicles with frame construction. All Challenger 12,000 lb. capacity and up in-ground lifts include Stack Adapters and Frame Engaging Adapters.
VEHICLE DETAILING
223-00400
AccESSORIES: 223-00400 Stack pad kit. 223-00392 Automatic liquid evacuation device.
VEHICLE DIAGNOSTICS
WHEEL SERVICE
8-11
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: NORcO INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
ITEMS:
209-00020
FACILITY
209-00020
209-00021
209-00022
FLUID HANDLING
ITEMS:
209-00021
ITEMS:
3/4-ton under-hoist stand with foot pedal
209-00022
LIFTING EQUIPMENT
PARTS STORAGE
JAck STANDS
POWERTRAIN SERVICE
Rotunda and Norco team up to provide a wide selection of vehicle support stands for all your lifting needs. Weight capacities range from 3 22 tons and support heights from 12 47". See the chart below to make your selection.
Patented spring-loaded pawl provides constant locking pressure against lifting column. Four-legged base with foot pads for added strength and a more secure footing on asphalt. Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted by the column. Item 209-00011 has recessed column saddle for the acceptance of vehicle panel rail. Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle. Made in U.S.A.
Base 7-1/2" x 7-7/8" 10-1/16" x 11-1/16" 13" x 15" 16 x 16" 10" 10" Weight (per pair) 19 lbs. 30 lbs. 86 lbs. 80 lbs. 106 lbs. 66 lbs.
209-00011 209-00107
VEHICLE DETAILING
IMpORTED:
Item # Capacity (each stand) 10-ton 22-ton Low Height 28" 12" High Height 47" 20" Height Intervals 10 x 2" 3 x 3" Base 10" 10" Weight (per pair) 106 lbs. 66 lbs.
VEHICLE DIAGNOSTICS
209-00182 209-00176
8-12
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: OTc/SpX SERVIcE SOlUTIONS
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
300-OTC1595E 300-OTC1585AE
FACILITY
This lift will handle engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric bus batteries and more.
FLUID HANDLING
FEATURES:
ITEMS:
Scissors-type design allows access to all (4) sides of a component. Powered by a quiet, 110 volt electric/hydraulic pump. Smooth, steady lifting and lowering motion controlled by handheld remote. (2) patent-pending independent adjusting screws tilt the table 15 side-to-side or fore-and-aft and ensure maximum stability of the table in any position. Larger casters accommodate heavy loads. A 30' long retractable extension cord reel is mounted to the frame.
LIFTING EQUIPMENT
ITEMS:
PARTS STORAGE
300-OTC1595E
SHOP FURNITURE
VEHICLE DETAILING
ITEMS:
300-OTC1758E
300-OTC1758E
VEHICLE DIAGNOSTICS
8-13
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: NORcO INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
209-00189 209-00190
ITEMS:
LIFTING EQUIPMENT
Single pump transmission jack Double pump transmission jack 1/2-ton air and hydraulic transmission jack 3/4-ton air and hydraulic transmission jack
NOTE: All jacks are designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.
209-00192
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
NOTE: These adapters work exclusively on Rotundas 209-00142, 209-00190 and 209-00189 transmission jacks.
STARTING & CHARGING SYSTEMS
209-00097
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
8-14
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED BY: QUAlITY STAINlESS PRODUcTS
COLLISION REFINISHING
Make easy work of a backbreaking job. Lifts tire and wheel assemblies up to 200 lbs. Raises to full height in under 10 seconds. Safety and protection the two parking brakes ensure the lift will not move when in use. The cable and rollers are enclosed to protect from dirt and other debris. Rotating casters all caster wheels rotate a full 360 for greater maneuverability and easier movement around the vehicle. Air-operated control no batteries to charge, always ready-tooperate. Safe neutral center, raise, lower toggle valve for easy up/ down positioning. Storage and convenience the mobile tire lift has a tool and lug nut storage tray located on the lift. Made in U.S.A. Patent pending.
COLLISION REPAIR
FACILITY
FLUID HANDLING
ITEMS:
337-00001
LIFTING EQUIPMENT
300-OTC1735A
300-OTC1750AE
POWERTRAIN SERVICE
SHOP FURNITURE
A 96:1 ratio worm and gear set rotates components a full 360; handle locks in any position. Integral 12-ton jack raises the work to provide the swing radius needed for clearance. (2) front wheels and (2) rear casters provide mobility. Universal adapter assembly permits use with a wide variety of mounting plates.
VEHICLE DETAILING
ITEMS:
ITEMS:
300-OTC1735A
engine stand
VEHICLE DIAGNOSTICS
8-15
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: NORcO INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
FEATURES:
SHOP FURNITURE
Maneuverability is made easy by means of four swivel caster wheels. Two rear caster wheels include a locking mechanism which can prevent the dolly from moving. Unique offset design offers open access from the rear to mount wheel to the vehicle. Onboard rollers make for easy stud-to-hole alignment. Air-operated pump allows the unit to lift the load effortlessly. 6-1/4" low height of support legs.
ford Engineering Approved equipment industry leading equipment suppliers Convenient parts ACCOUNT BILLING installation & training ASSISTANCE
ITEMS:
VEHICLE DIAGNOSTICS
WHEEL SERVICE
8-16
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: NORcO INDUSTRIES
www.fordrotunda.com
COLLISION REFINISHING
209-00168
COLLISION REPAIR
209-00091
The powertrain lift table not only handles transmissions and fuel tanks, but also engines and transaxles, rear ends and leaf springs. Serves as a worktable where the components can be lowered to a stable and secure work height for repair.
FACILITY
FEATURES:
ITEMS:
An air/hydraulic foot pump includes a metered valve for safe lowering of the load. The pump can be removed from its holder, placed closer to the lift saddle, leaving hands free to accurately position the load. Fully adjustable saddle with (2) ratchet tie-downs secure the load to the saddle. (4) swivel ball bearing caster wheels with polyurethane tread protect floors yet provide easy maneuverability. The rear caster wheels have a double locking feature. (1) lock prevents the rear wheels from turning when the lift is used in a repair mode. The other locks the rear casters in a fixed direction to provide steering ability.
FLUID HANDLING
LIFTING EQUIPMENT
ITEMS:
209-00091
PARTS STORAGE
209-00144 209-00153
For safe handling and positioning of automotive engines weighing up to 1,250 lbs.
POWERTRAIN SERVICE
FEATURES:
209-00195
50:1 ratio gearbox activated by hand crank easily turns the 360 rotation head to the desired work position. Fully adjustable engine mounting head. (2) rigid wheels in back and (2) swivel caster wheels in front provide maximum stability and support. (1) locking caster wheel secures the stand in the desired work location. Telescopic base locks into any (1) of (4) different positions to extend the length of the stand for added stability and for added adjustability.
SHOP FURNITURE
Designed to attach to a crane to position automobile and light truck engines and other vehicle components.
FEATURES:
ITEMS:
209-00144 209-00153 209-00154 209-00183 209-00184
1,250 lb. capacity with telescoping base 2,000 lb. capacity engine stand 6.0 and 6.4 liter diesel engine mounting adapter 6.2 liter gas engine adapter 6.7 liter diesel engine adapter
Designed to hook to a crane or hoist to handle and position large, bulky components. The horizontal tilt can be adjusted to compensate for off-center loads, or adjusted to a certain angle for a component being positioned. Large adjustment handle allows for quick and easy leveling of the load. Can be used with 209-00168.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
ITEMS:
209-00195
8-17
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUpplIED BY: OTc/SPX SERVIcE SOlUTIONS
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
300-OTC1527E 300-OTC1820E
FLUID HANDLING
CAR DOllY
FEATURES:
Innovative patent-pending design clamps directly to pinch welds to prevent slippage during use. Independent units eliminate the need to adjust dolly width for different vehicle designs. Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame. Universal design for use on all vehicle types without additional adapters. Provides easy movement of an FWD vehicle after removal of the drive train. 5" polypropylene casters. Each unit has a capacity of 1,800 lbs. (3,600 lbs., pair) with a low height of 9" and a high of 14". May be used with or without tires on the vehicle.
LIFTING EQUIPMENT
ITEMS:
PARTS STORAGE
300-OTC1820E 300-OTC1819E
4,400 lb. heavy-duty floor crane 2,200 lb. heavy-duty floor crane
ITEMS:
POWERTRAIN SERVICE
300-OTC1572E
014-00792
7.3L DIT front mounting brackets for use with revised oil cooler Engine lift bracket set designed specifically for 3.8L V6 Windstar, Taurus, Mustang, Continental
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
8-18
BRAKE SERVICE
1-800-ROTUNDA
SUpplIED BY: NORcO INDUSTRIES
www.fordrotunda.com
FEATURES:
A heavy-duty floor jack designed for a variety of automotive shop uses; includes the added capacity and maximum lift height to handle most SUVs.
COLLISION REFINISHING
FEATURES:
Steel hydraulic block assembly includes dust seals to prevent oil contamination. Long, removable two piece handle with knurled hand grip provides ease of pumping, longer reach for positioning under overhang, ease for transportation and storage and ease of pumping in tight quarters when second handle section is removed. 3-3/4" low and 24-3/4" maximum lift heights. Safety by pass system protects pressure cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Heavy-duty chassis.
COLLISION REPAIR
FACILITY
ITEMS:
209-00163 Professional-duty 2-ton floor jack 209-00196 Professional-duty 2-ton double pump floor jack
ITEMS:
209-00156
FLUID HANDLING
OpTIONS:
209-00138
OpTIONS:
Handle protector kit.
209-00138
LIFTING EQUIPMENT
209-00163
PARTS STORAGE
ITEMS:
209-00164
POWERTRAIN SERVICE
OpTIONS:
209-00102 209-00138
209-00156
SHOP FURNITURE
5-ton @ 62-1/4" 209-00141 120 p.s.i. 209-00135 209-00136 209-00156 209-00196 10-ton 68-1/2"
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
8-19
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUpplIED BY: OTc/SPX SERVIcE SOlUTIONS
FEATURES:
COLLISION REPAIR
Light and compact design for ease and convenience. Built of rugged, select steel. Lifting range of 5 20". Built-in safety valve which prevents overloading. Jack maneuvers easily by stepping on the rear foot plate while the rear casters balance the total weight. Handle length is 40". Weight: 80 lb. 8 oz.
FACILITY
ITEMS:
300-OTC1503AE
FLUID HANDLING
300-OTC1505BE
LIFTING EQUIPMENT
ITEMS:
300-OTC1532E
FEATURES:
SHOP FURNITURE
The Stinger Series 3-ton hydraulic service jack is designed for the budget-minded shop owner who still wants the quality of an OTC product. Built from select steel, this jack can stand up to the abuse that jacks are subjected to daily. Yet, its light compact design makes it easy and convenient to use. Jack has a built-in safety overload system that prevents use beyond its rated capacity. With rear swivel casters, maneuvering and positioning these jacks is an easy task. Lifting range of 5 20-1/4".
ITEMS:
ITEMS:
300-OTC1532E
WHEEL SERVICE
8-20
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: sTANley VidMAR
www.fordrotunda.com
Favored by auto dealers, service centers, manufacturers, race teams and custom shops around the globe, Stanley Vidmar is custom-built around your exact requirements. Store it, protect it and retrieve it with (1) tough storage system.
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Organization its the key to any protable parts department. To be organized and stay organized, you need the power of an efcient storage system.
The Vertical Lift Module (VLM) and Automated Storage and Retrieval System (AS/RS) is the ultimate high-density storage solution. Manage up to 132,000 lbs. of material from one convenient computer console! An entirely modular structure, the VLM allows you to store, locate and pick materials for limitless types of applications. A variety of VLM models offer you choice of performance, capacity and conguration options; whatever you need to achieve.
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
TiRe STORAGe
STORAGe CAbiNeTs
(2) storage cabinets hold as much as (5) traditional shelving units. Protect and control inventory while cutting retrieval times. Fully extendable drawers can hold up to 400 lbs. each! Keep all parts secure and accounted for. WARRANTY: Lifetime.
Take your tire storage to the next level! The Tire Carousel is the ultimate in tire storage convenience and efficiency! Fully motorized for quick, easy storage and retrieval, the Tire Carousel allows (1) operator to rotate carrier frames, locate desired tire sets, stop at proper position and remove tires safely at oor level. Our tire carousel reduces the risk of injury by doing all of the lifting for you! Plus, due to its small footprint, the Tire Carousel maximizes your storage efficiency by fully utilizing your vertical storage space. Tire Carousel handles various tire sizes up to 36" in diameter. Tire Carousel is available in a number of pre-congured sizes or can be custom congured to your exact specications.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
9-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: BORROuGHs CORpORATiON
www.fordrotunda.com
BATTeRy RAcKs
COLLISION REFINISHING
FeATuRes:
(4) levels of storage. Angled mesh deck. Gravity-fed no rollers to break or seize.
COLLISION REPAIR
FACILITY
TiRe RAcKs
FeATuRes:
FLUID HANDLING
Tires rest on angle beam will not roll off. Rivet-Span design easy to assemble. Single or double entry units.
Item #
Tire Levels 3 4 5 3 4 5
Dimensions 12" d x 60" w x 84" h 12" d x 60" w x 120" h 12" d x 60" w x 144" h 42" d x 60" w x 84" h 42" d x 60" w x 120" h 42" d x 60" w x 144" h
LIFTING EQUIPMENT
PARTS STORAGE
204-00068
FeATuRes:
SHOP FURNITURE
Strong and durable Heavy 14-gauge steel frame construction. High quality powder coated nish. Versatile and flexible Easy to assemble All pieces universal no lefts or rights, fronts or backs. No clips or cross braces required. Most units assemble in minutes using only a rubber mallet. Economical Low initial investment reduces shelving expenses. Quick, labor-saving installation reduces setup costs.s.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
204-00062 204-00064
204-00062
NOTE: Complete units, including particle board, decking and all accessories.
WHEEL SERVICE
9-2
BRAKE SERVICE
1-800-ROTUNDA
Supplied by: BORROuGHs CORpORATiON
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
speciFicATiONs:
No. Drawers 4-1/2" High/ Compartments 4/20 4/20 4/28 4/28 4/20 4/20 4/28 4/28 No. Drawers 6" High/ Compartments 3/16 3/16 3/24 3/24 5/16 5/16 5/24 5/24
FACILITY
Item #
Dimensions 24" d x 36" w x 87" h 24" d x 36" w x 87" h 24" d x 48" w x 87" h 24" d x 48" w x 87" h 24" d x 36" w x 99" h 24" d x 36" w x 99" h 24" d x 48" w x 99" h 24" d x 48" w x 99" h
Unit Type Starter Adder Starter Adder Starter Adder Starter Adder
FLUID HANDLING
204-00151
Open-type units are ideal for storing large, heavy or bulky parts while providing maximum economy. Closed-type units with backs protect the contents while providing a neat, nished appearance. Perfect for storing loose parts.
LIFTING EQUIPMENT
FeATuRes:
Unique design of the shelf bracket ensures fast, easy assembly . . . saving time and money. Shelf adjustment is easy because the shelf bracket captures shelves rather than binding them. High quality powder coat finish. Shelves adjust on 1-1/2" vertical centers.
PARTS STORAGE
POWERTRAIN SERVICE
Closed-Type Bulky Parts Bins 6 Shelves 36" x 18" x 87" 36" x 24" x 87" 48" x 18" x 87" 48" x 24" x 87"
VEHICLE DETAILING
204-00022
204-00030
VEHICLE DIAGNOSTICS
Colors: #065 Gray, #445 White, #B504 Blue, #C386 Red, #040 Black, #F604 Pebble Tan or #161 Mist Gray. (Specify color when ordering.)
9-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
9-4
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED BY: ROBINAIR/sPX sERVICE sOLUTIONs
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
300-ROB75700E
300-ROB92500E
Robinairs new transmission oil exchanger has the vehicle in and out of the service bay in less than 20 minutes! Our unique approach to exchanging fluid through the transmission oil dipstick!
LIFTING EQUIPMENT
FEATURES:
PARTS STORAGE
ITEMS:
No rusty fittings to break loose. Easy, convenient and no damage to other engine components. Exchange oil in the pan before it passes through the transmission filter. (3) modes of operation dipstick only, cooler line or a combination of the (2). Exchange accuracy approximately 1/4 quart. 32-quart supply tank, 34-quart waste tank. Unprecedented 1/10th quart flow metering for adding or subtracting fluid from the pan. Complete set of cooler adapters for most foreign and domestic vehicles. Works with all types of transmission fluid. Integral performance designed hose and tool compartment with drain. Low fluid alarm and indicator light to alert operator. Drain-waste feature automatically pumps used fluid from the machine into a waste oil container. Drain-pan feature drains the pan for easy filter replacement. No mess.
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
ITEms:
VEHICLE DIAGNOSTICS
10-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: fLO-DYNAmICs
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
199-00064
199-00066
PARTS STORAGE
ATF X-ChANgER
FEATUREs:
Unique combo unit exchanges transmission fluid connecting to cooler lines or through dipstick tube. Fully automatic operation allows greater revenue and profit. New 2.5 g.p.m. pump ensures rapid exchanges. Works with vehicles 12-volt battery for easy ATF and power steering fluid exchange. Complete fluid exchange in minutes. Remove fluid feature allows cleaner removal of pan for filter change when necessary. 24 quart new and used tanks. New easy to use LCD control panel. Select any quantity from 1 to 20 quarts. Power interruption memory. Adapters for most domestic and foreign vehicles included.
COOLANT X-ChANgER
FEATUREs:
Dual new fluid tanks. Rapidly drain and fill coolant with the radiator mouth suction and fill process. Quickly and completely flush/exchange all coolant in the system. Drain for component change. Perform a pressure test on the system and radiator cap.
POWERTRAIN SERVICE
SHOP FURNITURE
INCLUDEs:
ITEMS:
(2) separate 7 gallon new fluid tanks. 8 gallon waste fluid tank. Automatic new and waste fluid tank shutoff with indicator. (2) 10" rear wheels, (2) locking front casters and handle for easy movement. Pressure/vacuum gauge. Quick seal connectors keep fluid inside the hoses rather than on the floor.
ALSO AVAILABLE:
ITEms:
199-00066
199-00060 ATF Fluid Exchanger for auto and large trucks with
Coolant X-Changer
VEHICLE DIAGNOSTICS
standard or Allison transmissons. 199-00059 ATF and Power Steering Fluid Exchanger 199-00058 ATF X-Changer 199-00073 Instant Fluid Diagnostic Kit
WHEEL SERVICE
10-2
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: fLO-DYNAmICs
www.fordrotunda.com
SUPPLIED BY: LOCK-N-sTITCh
Extracts and fills engine oil, PSF, ATF, differential fluid, manual transmission fluid and transfer case fluid. Large 6.5 g.p.m. gear pump allows for fast extraction. Triple gear pump design one dedicated to extraction, one to filling and one to draining the waste tank. No cross-contamination. Automatic shut-off when waste fluid tank is full. LED indicators. Onboard adapter organizer. Four casters for easy mobility.
COLLISION REPAIR
FACILITY
FLUID HANDLING
ITEms:
199-00074 EVAC-U-MAX
multi-fluid extractor
For 4.6L, 5.4L and 6.8L Triton engines. The only insert tested and approved by Ford. The Triton cylinder heads were manufactured using (3) different spark plug hole geometries. The kit comes with everything you need to identify the type of head you have. The type cant be determined by the engine, year or model; you need the gauge. Installation tools for each of the (3) types are included.
LIFTING EQUIPMENT
PARTS STORAGE
FEATUREs:
The (10) inserts included in your kit are made of aluminum and are hard anodized for strength and durability. Installation can be done over the fender or on the bench. These inserts can also be used to repair other manufacturers 14 mm spark plug holes in aluminum cylinder heads. Will not come out or strip again. Easily pay for the complete kit with only a few installations.
POWERTRAIN SERVICE
SHOP FURNITURE
ITEms:
302-00001
ITEms:
fluid x-changer in roll around cabinet 199-00061 Power steering fluid x-changer in portable box 199-00062 Power steering fluid x-changer with cart 199-00063
OPTIONs:
302-00002
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
10-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: G-TEC
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
Protects your profits by preventing comebacks. This unit is heated, pulsates, and has air injection and flow reversal for extremely effective removal of dirt and debris from cooler lines and heat exchangers. Features include: 1,750 ppm pump, commercial grade motor with 1/2 hp service factor, heater, 9 gallon steel reservoir tank, 10" rubber tires, air injection, reverse valve, visual flowmeter, purge valve, 17 micron non by-pass magnetic spin-on filter, 17 micron by-pass spin-on filter, checkable filter screens, energy savings auto-controlled (140) thermostat and more.
ITEms:
FACILITY
222-00007
CONVERsION KIT
FLUID HANDLING
222-00007
Convert your current G-TEC Flusher to the top of the line G-TEC Flusher (222-00007).The Ford Update Kit includes everything you need including color step-by-step instructions.
ITEms:
GENERAL SHOP EQUIPMENT
222-00008
Conversion Kit
ACCEssORIEs:
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
flusher, i.e. early Ford Super-duty, Duramax, Jaguar, Allison, Cummings Transmissions, etc. 222-00015 Push on adapter kit Adapts late GM, early Dodge/ Chrysler, late Ford (500/Taurus) and late Ford SUV/truck cooler lines to the flusher. 4 pairs of adapters. Includes 222-00016 222-00016 19 mm cooler line adapters Included in 222-00015. Adapts Ford late model Navigator/Explorer/F-150/ F-250/6R140/6R80/6R60/6R75/6HP26 cooler lines to the flusher. (1) pair of adapters 222-00017 Vibration hour meter Monitors cleaning time allowing user to know when to change filters. Changing filters is integral to the flushers effectiveness. Filters should be changed every 100 flushes or 60 hours on the hourmeter. Easy to install, no wiring, battery powered. Not limited to use on G-TEC flusher. Can be attached to any equipment with vibration
222-00006
222-00008
222-00015
222-00017
SHOP FURNITURE
REPLACEmENT PARTs:
222-00018
222-00019
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
By-Pass spin-on filter (BP1) Single by-pass magnetic 17 micron filter for heated cooler line flusher. Changing filters is integral to the flushers effectiveness. Flusher uses (1) non by-pass and (1) by-pass. Filters should be changed every 100 flushes Non by-pass spin-on filter (NBP2) Single non by-pass magnetic 17 micron filter for heated cooler line flusher. Changing filters is integral to the flushers effectiveness. Flusher uses (1) non by-pass and (1) by-pass. Filters should be changed every 100 flushes Pack of 6 NBP2 filters Pack of 6 BP1 filters Combo pack of 3 BP1 and 3 NBP2 filters Flow meter kit Banjo adapter kit Purge valve kit Replacement hose kit Domestic adapter kit OBERG Filter assembly with 4" 28 Micron kit
222-00018
222-00019
222-00026
WHEEL SERVICE
10-4
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: sTANlEy VIdMAR
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Stanley Vidmar takes service departments around the world to new levels in terms of protability, organization, accountability and appearance.
LIFTING EQUIPMENT
The Automotive Technicians Center (ATC) is a state-of-the-art combination of tool and equipment storage, overhead storage, technical benching, computer cabinets, hydraulic lift controls, hose reel storage and more. ATCs are available in a number of popular pre-congured models or can be custom congured to your exact specications. Whether your primary requirement is tool storage, bulk storage or under-bench hose or cord applications, the ATC can accommodate all of your needs in (1) modular layout. Best of all, all ATC components are designed to integrate seamlessly with the rest of Stanley Vidmars storage components Stanley Vidmar modular storage cabinets, mobile workcenters, mobile cabinets and utility carts are the perfect complements to your ATC!
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
11-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
Shure Manufacturing Corporations SHURETECH Bench System is a modular and versatile system that can meet the workbench and tool storage requirements for any shop environment. Customers can design their individual SHURETECH workstation by selecting individual components.
COLLISION REPAIR
ITEMS:
080-00618 080-00626
1-Bay with tool and storage cabinets 2-Bay with double tool and storage cabinets
FACILITY
080-00618
Shures Hybrid Systems are extremely versatile and can be customized in numerous congurations and allows for increased under-bench storage.
ITEMs:
GENERAL SHOP EQUIPMENT
panel
080-00615 5' Stationary Hybrid unit 080-00616 10' Stationary Hybrid unit with lift concealment
080-00626
panel
LIFTING EQUIPMENT
BENEFITs:
UPGRAdEs:
Stainless steel-over-wood core bench top and stainless steel utility chase panels. 080-00617
POWERTRAIN SERVICE
Shures TC3 System (Technician Customer Care Center) integrates all of the essential workspace, storage, tools and equipment that busy service technicians need to maximize their efciency and productivity.
SHOP FURNITURE
BENEFITS:
Improve your image productivity and efficiency. Attract and retain the best qualified service technicians. Increase customer loyalty, repeat business and service revenues. Stationary and wall-mount units are available along with multiple congurations for your specic shop requirements.
080-00614
VEHICLE DETAILING
CAll 1-800-ROTUNDA OPTION #2 FOR dETAIls ANd TO HAVE A sHURE REPREsENTATIVE CONTACT yOU.
TC3
VEHICLE DIAGNOSTICS
WHEEL SERVICE
11-2
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
SHUREsHOP WORKbENCHEs
Provide maximum work space. Adjustable height, all welded leg construction offers enhanced durability. Hardwood maple, painted steel and stainless steel tops available. Accessory kit available with lower shelf, backstop and end stops. NOTE: All items shipped unassembled.
FLUID HANDLING
34" Depth
080-00598 080-00604
34" Depth
080-00599 080-00605 080-00609 080-00590
34" Depth
080-00600 080-00606 080-00610
LIFTING EQUIPMENT
PARTS STORAGE
Painted steel or stainless steel top is available; please specify when ordering.
CUsTOM WORKbENCHEs
FEATUREs:
Storage options include open configuration, sliding doors or (2) drawers/sliding doors combination. Locks are available to secure the drawers and doors. Styles include wall-mounted, portable or stationary.
POWERTRAIN SERVICE
Wall-mount 080-00591
SHOP FURNITURE
ACCEssORIEs:
VEHICLE DETAILING
Wood Top
080-00588 080-00594 080-00582
Wood Top
080-00586 080-00592 080-00580
VEHICLE DIAGNOSTICS
Portable 080-00585
11-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
080-00572
080-00575
GENERAL SHOP EQUIPMENT
LIFTING EQUIPMENT
PARTS STORAGE
080-00613
POWERTRAIN SERVICE
080-00576
SHOP FURNITURE
TEARDOwN WORKbENCH
FEATUREs:
Versatile, portable teardown benches ease the task of working with uid-saturated components including transmissions, small engines and hydraulic systems.
Shures Realiti Work Centers professional work centers at their nest. Work centers include a ip-front cabinet with freestanding uprights, stainless steel perforated tool board and a 2-drawer/4door storage combination.
ITEMs:
VEHICLE DETAILING
ITEMs:
080-00572 Teardown workbench 080-00612 Fluid containment bench with stainless steel top
080-00575 5' Realiti work center with stainless steel top and
freestanding uprights
REAlITI WORKbENCH
ITEMs:
ITEMs:
080-00613 Portable Trans Max teardown bench
surface
WHEEL SERVICE
11-4
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
The Shure Tech Select Cart TSC combines maximum storage capacity and portability with an all-welded design that provides stability and durability for any environment.
Additional Space Saver Cabinets can be added to meet your individual storage requirements.
COLLISION REFINISHING
FEATUREs:
ITEMs:
080-00532 080-00533
Flip-up steel top with gas spring shocks reveals a 4" d compartment with vinyl mat. (2) Lockable drawers.
Space Saver Cabinet double unit Space Saver Cabinet single unit
COLLISION REPAIR
bINdER CAbINET
ITEMs:
080-00652
All welded construction binder cabinets are available in 24", 36", 48" and 60" widths.
ITEMs:
080-00485 080-00482 080-00481
FACILITY
Improve efficiency by reducing travel time. Shures 2 Tier Tire Cart safely and securely transports both new and used tires and wheels at one time with increased storage space.
FEATUREs:
ITEMs:
080-00651
TECHNICIAN CART
Shure Manufacturing Corporations Technician Carts feature maximum storage capacity and portability. All welded construction provides stability and durability for any environment.
080-00573
LIFTING EQUIPMENT
FEATUREs:
Top and bottom shelves with 1-1/2" lip on all sides and a lockable drawer. 3" casters.
080-00532
PARTS STORAGE
ITEMs:
080-00505
Shure Manufacturing Corporations Modular Tool Storage improves organization and increases productivity and efciency in any tool storage environment. Five standard configurations are available.
SHOP FURNITURE
FEATUREs:
Full-extension locking drawers with 400 lb. capacity. Stainless steel top cap. Concealment skirt and 4 swivel casters (portable models). Drawer liners.
080-00651 080-00505
STARTING & CHARGING SYSTEMS
ITEMs:
080-00489
WAll-MOUNTEd CAbINET
ITEMs:
080-00573
VEHICLE DETAILING
Wall-mounted cabinet
080-00489
080-00652
11-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPlIEd by: BORROUGHs CORPORATION
www.fordrotunda.com
FEATUREs:
COLLISION REPAIR
FACILITY
Built sturdy to withstand hard, daily use and flexible enough to adapt to changing requirements. Steel tops are heavy-duty 12-gauge with front and rear channel formations for added strength and years of reliable service. Stainless steel tops are also available (SS). High quality powder coated finish. The work surface can be set at the most comfortable height. The legs are adjustable on 1" centers and provide a height range of 27-1/2 36".
Painted Top
204-00168 204-00169 204-00170
SS Top
204-00153 204-00154 204-00155
204-00171
LIFTING EQUIPMENT
PARTS STORAGE
130 SERIES (wITH LOwER SHElF ANd BACK ANd ENd GUARds)
Painted Top
204-00174 204-00175 204-00176
204-00175
SS Top
204-00159 204-00160 204-00161
POWERTRAIN SERVICE
FEATUREs:
Ideal for transmission and engine repair. 48" x 28" top angles to a drain. Removable plastic bin is standard. Adjustable leg height. (2) rigid and (2) locking casters.
ITEMs:
204-00143
VEHICLE DETAILING
Teardown bench
ACCEssORIEs:
204-00144
VEHICLE DIAGNOSTICS
Colors: #065 Gray, #445 White, #B504 Blue, #C386 Red, #040 Black, #F604 Pebble Tan or #161 Mist Gray. (Specify color when ordering.)
WHEEL SERVICE
11-6
BRAKE SERVICE
1-800-ROTUNDA
SUPPlIEd by: BORROUGHs CORPORATION
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
ENClOsEd WORKbENCHEs
FEATUREs:
No exposed hardware on front, top or back. Heavy-duty 12-gauge steel legs and work surface. Optional stainless steel (SS) work surfaces available. Available center shelf holds up to 500 lbs. Sliding doors with key lock standard. Full-length top and bottom door tracks.
FLUID HANDLING
LIFTING EQUIPMENT
Dimensions 48" w x 28" d x 28" h 60" w x 28" d x 28" h 72" w x 28" d x 28" h 48" w x 28" d x 34" h 60" w x 28" d x 34" h 72" w x 28" d x 34" h
SS Top
204-00188 204-00190 204-00192 204-00203 204-00205 204-00207
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
ITEMs:
204-00193 204-00194 204-00195
VEHICLE DETAILING
Caster base for 48" wide, enclosed bench Caster base for 60" wide, enclosed bench Caster base for 72" wide, enclosed bench
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
11-8
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: MIDTRONICs
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
162-00036
FACILITY
MICRO590 BATTERY TEsTER + HIGh RATE ChARGER = FORD GR-1-190 TWO TOOLs IN ONE! SAVE MONEY!
162-00050
FLUID HANDLING
The Ford GR-1-190 is both a battery tester and fast charger all in one. It uses the same conductance battery test technology currently in the MICRO590 battery tester. It even includes the Ford battery warranty code output required for all battery warranty replacements. Additionally, the Ford GR-1-190 is an intelligent, fast charger that can quickly charge good batteries to 90% state of charge, in most cases in less than one hour. Best of all, bad batteries are kicked out early in the charge cycle. This means less wait time for you and your customers. By testing and monitoring battery condition throughout the charge cycle, batteries are quickly and safely charged without any gassing!
162-00051
EXP-890 BATTERY ANALYZER WITh INTEGRATED PRINTER AND SOfT-SIDED CARRYING CAsE
FEATUREs:
The Midtronics EXP-890 sets the standard for professional battery preventative maintenance. Features like easy-to-use controls, compact size, and an integrated printer make the EXP-890 the ideal choice for dealers who want to offer preventative maintenance as part of their value-added solutions.
LIFTING EQUIPMENT
Integrates battery testing and charging. Includes MICRO590 tester functionality. One tool for all of your battery problems. Eliminates charge and retest decisions. Provides either a Good or Replace battery decision. Uses diagnostic conductance charging to test the battery initially, during and after charging has completed. High rate (0 60 amps) fast, safe, intelligent charging. ULC Listed. Recovery charging mode designed to recover deeply sulfated batteries. Multiple battery test and charging algorithms (Standard, Orbital, Heavy-duty truck). ACES battery warranty code generation. Can be used in and out of vehicle. Backlit menu driven display for user-friendly operation. Provides measured CCAs, amp hours accepted, time remaining outputs. Jump-start (250 amps) mode to get vehicles going quickly. Top-Off mode for the times when you want to get that battery fully charged. Special manual mode allows the technician to specify specific charging rates and times.
FEATUREs:
PARTS STORAGE
Dynamic Conductance Battery Testing Technology. Combines direct temperature measurement with deep scan technology to improve accuracy and decisiveness. Advanced preventative maintenance algorithms identify batteries approaching end-of-life. Superior User Interface. Large graphical screen features icons and improved explanations. Scroll bar capability reduces number of screens. Hot keys improve logic and flow. Printer enhances and reinforces the selling/service process.
POWERTRAIN SERVICE
SHOP FURNITURE
SPECIfICATIONs:
Applications: 6 and 12 volt batteries Battery chemistries: Regular (flooded); AGM Spiral; AGM and Gel Test Leads: 4' cable with HD dual conductor Kelvin clamps Supported languages: English, French-Canadian and Spanish
ITEMs:
162-00050
VEHICLE DETAILING
ITEMs:
EXP-890 Battery Analyzer with Integrated Printer and soft-sided carrying case
VEHICLE DIAGNOSTICS
ALsO AVAILABLE:
162-00051
ACCEssORIEs:
12-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUPPLIED BY: OTC/sPx sERVICE sOLUTIONs
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
ITEMS:
300-OTC3131AGM
Minuteman Plus multi-purpose battery and electrical system tester with cart 300-OTC3131AGM
LIFTING EQUIPMENT
POWERTRAIN SERVICE
Midtronics PSC charger line is designed to provide clean power during flash programming (< 50 mV rms), while supporting loads and charging the vehicles battery. This ensures uninterrupted flash reprogramming of the customers vehicle and that the battery will be returned with a higher state of charge than when it entered the service bay.
SHOP FURNITURE
FEATURES:
Fully automatic, plug it in and forget it. Simple to use, no dials or controls to set. Fully regulated DC output prevents overcharging of battery (13.6 volt maximum). Works with 12 volt Flooded Lead Acid and AGM. Switch-mode design reduces heat build-up in charger. Reverse battery polarity protection for added safety. Quiet, small and compact for portability. High quality, detachable cables for easy field service. 55 amp output.
162-00043
VEHICLE DETAILING
ITEMS:
162-00043
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: AssOCIATED
www.fordrotunda.com
COLLISION REFINISHING
(A)
(B)
COLLISION REPAIR
331-00002
331-00018
WhEEL ChARGERs
sPECIfICATIONs:
Item # Style Voltage output UL continuous rating Boost rating UL cranking assist rating AC cord DC leads AGM battery safe Power supply mode Shipping dimensions (h x w x d) Weight Warranty 331-00001 A 12 volt 70 amp 250 amp 250 amp 6' 14-3 6.5' 4 AWG Yes Yes 26" x 17" x 14" 54 lbs. 5 year limited 47 lbs. 3 year limited 331-00002 A 12 volt 40 amp 130 amp N/A 6' 16-3 6.5' 6.5 AWG Yes Yes 331-00005 A 6/12/24 volt 70/65/30 amp 600 amp 280 amp 6.5' 16-3 7' 4 AWG No No 23" x 19" x 16" 53 lbs. 5 year limited 48 lbs. 5 year limited 48 lbs. 5 year limited 331-00006 A 6/12 volt 70/60 amp 540 amp 265 amp 6.5' 16-3 7' 4 AWG No No 331-00007 A 6/12 volt 70/60 amp 500 amp 250 amp 6' 16-3 6.5' 6.5 AWG No No 331-00025 A 12 volt 60 amp 540 amp 270 amp 6.5', 16-3 6.6' 5 AWG Yes Yes 29" x 17" x 16" 49 lbs. 331-00018 B 6/12 volt 100/75 amp 625 amp 375 amp 10' 14-3 8' 4 AWG No No 26" x 16" x 14" 58 lbs. 5 year limited 70 lbs. 5 year limited 331-00019 B 6/12/18/24 volt 100/80/50/40 amp 725 amp 400 amp 10' 14-3 8' 4 AWG No No
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
BENCh ChARGERs
sPECIfICATIONs:
Item # Voltage output UL continuous rating UL cranking assist rating DC output DC leads Clamp rating AC cord AGM battery safe Shipping dimensions (h x w x d) Weight Limited Warranty Made in U.S.A. 331-00010 120 VAC 60 Hz 25 amp N/A 20 amp 6.5' 10 AWG 300 amp 6' 18-3 Yes 14" x 12" x 12" 21 lbs. 1 year Yes 331-00012 12 volt 10 amp N/A 10 amp 6.5' 16 AWG 50 amp 6' 18-3 Yes 10" x 9" x 9" 11 lbs. 1 year Yes 331-00013 6/12 volt 70/60 amp 230 amp 70/60 amp 7.5' 6.5 AWG 500 amp 6.5' 16-3 No 13" x 16" x 14" 38 lbs. 5 year Yes 331-00014 6/12 volt 15/2 amp 100 amp 15/2 amp 6.5' 6.5 AWG 75 amp 6.5' 16-3 No 10" x 10" x 6" 14 lbs. 2 year No 331-00017 12 volt 20 amp each lead set N/A 20 amp x 4 channels 6' 12 AWG 300 amp x 4 sets 7' 16-3 Yes 16" x 19" x 16" 40 lbs. 1 year Yes
POWERTRAIN SERVICE
331-00013
SHOP FURNITURE
331-00017
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
331-00010
WHEEL SERVICE
12-3
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: AssOCIATED
www.fordrotunda.com
sPECIfICATIONs:
Item # DC output AC input Cold cranking amps Clamps DC leads AC cord Shipping dimensions (h x w x d) Weight 331-00011 331-00016 331-00023 331-00024
10 amp Up to 1100 amp 500 amp 8' 4 AWG 6.5' 16-3 17" x 16" x 29" 29 lbs.
N/A 110 volt 360 amp 400 amp 36" 6' 11.5" x 18" x 4.25" 22 lbs. 500 amp 32"
12 volt 720 amp 800 amp 66" 4' 18.25" x 16.75" x 10" 44 lbs.
COLLISION REPAIR
331-00016
FACILITY
Made in U.S.A.
Yes
Imported
FLUID HANDLING
AUTOMATIC ChARGER/MAINTAINERs
sPECIfICATIONs:
331-00011
LIFTING EQUIPMENT
331-00021
331-00020
331-00022
12 volt
331-00021
0.8 2 amp
PARTS STORAGE
331-00020
5" x 4" x 4"
POWERTRAIN SERVICE
Weight
SHOP FURNITURE
331-00022
VEHICLE DETAILING
ITEMs:
331-00003
VEHICLE DIAGNOSTICS
ALsO AVAILABLE:
331-00004
WHEEL SERVICE
12-4
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: BROADWAY EQUIPMENT CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
132-00001
132-00050
FLUID HANDLING
A vehicles exterior nish needs to be maintained like many other items on a vehicle. This automatic car polisher produces a consistent high-quality polish on each vehicle. With the Automatic Car Polisher and implementation of the Auto Butler customerretention program, your dealership can generate extra revenue and build long-term, satisfying customer relationships.
The rollover car wash incorporates the latest in technology and was designed with the car dealer market in mind. This car wash provides a high-quality wash, low cost maintenance and simple, easy to use operation.
FEATUREs:
FEATUREs:
One operator can turn out over (25) perfectly polished vehicles per day without concern of streaks, swirls or burn marks. To complement the car polisher the Auto Butler customerretention program keeps your customers coming back every (6) months for the next (5) years, giving you an unprecedented opportunity to increase sales and service. Your customers will love the way their car keeps its shine, and happy customers translate to a positive Customer Service Index (CSI). Use the Automatic Car Polisher to maintain your new and used inventory so the cars on your lot always look shiny and new. Patented hydraulic powered, air controlled, (5) cloth brush operation as gentle as a hands touch. (1) Bay of space adds a whole new profit center for your dealership.
Will wash vehicles up to 84" high. Low maintenance aluminum frame. Washes up to (30) vehicles per hour. Total vehicle coverage double cycle wash for cars, vans and pickups. Fully computerized for great versatility and complete adjustability. Installs as a drive-in/back-out or as a drive-thru system.
LIFTING EQUIPMENT
PARTS STORAGE
SPECIfICATIONs:
POWERTRAIN SERVICE
Minimum space requirement: Call for specications Electrical service: 15 hp motor, 60 amps, 3 phase, 208/230 or 480 volts Plumbing: 1" at 40 p.s.i./usage rate 25 g.p.m./standard oor drain Compressed air: 90 p.s.i./5 c.f.m.
SHOP FURNITURE
SPECIfICATIONs:
Minimum space required: Call for specications Electrical service: 15 hp motor, 60 amps, 3 phase, 208/230 or 480 volts Compressed air: Minimum 80 p.s.i./4 c.f.m.
ITEMs:
132-00050 Rollover Drive-in/Back-out Car Wash 132-00055 Rollover Drive-thru Car Wash with Retract Bar
ITEMs:
ACCEssORIEs:
132-00018 132-00021 132-00054 132-00120 132-00122
WARRANTY: All Broadway equipment comes with a 13-month parts and labor warranty.
Stop and Go Light Assembly Underbody Wash Rinse Arch Assembly High Pressure Side Blasters 4 Code Box Entry System
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
13-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: BROADWAY EQUIPMENT CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
132-00060
132-00116
LIFTING EQUIPMENT
A dual oscillating curtain, along with hundreds of soft cloth washing strips, cleans the hood, roof and sides of each vehicle. The over-sized flex wrap side pads, made from the same cloth material, use both mechanical processes as well as gravity to give 100% vehicle coverage for a complete clean. This machine is designed to give complete vehicle coverage in a quick, efcient manner to maximize wash volume.
CAR DRYERs
Broadway offers multiple dryer congurations for both regular and unique applications. The aluminum fans reach operating speeds almost immediately, reducing costly electrical surges. The close to vehicle air deployment will provide maximum drying efciency. The aluminum and/or hot-dipped galvanized frames provide durability in the harsh car wash environment and require no maintenance.
FEATUREs:
PARTS STORAGE
POWERTRAIN SERVICE
Smooth hydraulic operation reliable and low maintenance. Washes up to (60) vehicles per hour. Automatic operation no attendant needed. Entrance guides, included with system, align vehicle through the wash. Operate with or without a conveyor. Galvanized steel for solid, durable and unsurpassed structural integrity.
FEATUREs:
SPECIfICATIONs:
SHOP FURNITURE
Minimum space required: Call for specications Electrical service: 10 hp motor, 40 amps, 3 phase, 208/230 or 480 volts Plumbing: 1" at 40 p.s.i./usage rate 25 g.p.m./standard oor drain
45 hp Dryer driest car possible in all climates. Touch-free dryer. 30 hp Dryer drier car when noise is an issue. Utilizes wind sock technology to harness air current. 20 hp Dryer perfect for warm climates when only a little drying is needed. Utilizes wind sock technology to harness air current. Noise reduction systems available for 30 and 20 hp dryers to drop dBs down. Variable frequency drive upgrade reduces electrical usage and provides noise control. Local municipality rebates available.
SPECIfICATIONs:
ITEMs:
STARTING & CHARGING SYSTEMS
ACCEssORIEs:
Minimum space required: 13' 6" w x 10' 6" h x 7' l 45 hp electrical service: (3) 15 hp motors, 150 amps, 3 phase, 208/230 or 480 volts 30 hp electrical service: (4) 7.5 hp motors, 100 amps, 3 phase, 208/230 or 480 volts 20 hp electrical service: (2) 10 hp motors, 60 amps, 3 phase, 208/230 or 480 volts
ITEMs:
132-00116 45 hp System 132-00011 30 hp Double Leg System with side motors and
VEHICLE DIAGNOSTICS
ACCEssORIEs:
132-00117 Control Panel and Starter for 45 hp System 132-00022 Control Panel and Starter for 30 hp System 132-00009 Control Panel and Starter for 20 hp System
13-2
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: BROADWAY EQUIPMENT CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
132-00100
132-00105
Not A Spot In A Drop Complete rinsing of vehicle after car wash cycle will allow the vehicle to dry without a trace of water spotting. Not a spot in a drop. State-of-the-art materials are blended together and designed to give the equipment a long life with a minimum of service. This system is a perfect complement to any Broadway Car Wash offered in this catalog.
This reclaim system is a wall-hung unit designed to work well with any in-ground or above-ground tank system. The mounting board is pre-wired and pre-plumbed for easy installation in the car wash bay area. This reclaim unit reduces water consumption and will lower hook-up charges as well as operating costs. Water is pumped from the last compartment of the tanks through a cyclone separator to remove suspended solids.
LIFTING EQUIPMENT
PARTS STORAGE
FEATUREs:
FEATUREs:
Completely rinse with SPOT-FREE water, no wiping is necessary. Water quality monitoring system. Capable of producing 1,800 gallons of spot-free water per day. All components have been designed to protect and prolong the life of the equipment. Twin tank water softeners remove many solids in the water. Large capacity storage tanks. Large carbon filter tank.
Motor starter and controls. 2 hp pump and motor. Manual reclaim bypass. Cyclone separator. 2" foot valve and 2" control. Automatic priming. Fresh water bypass.
POWERTRAIN SERVICE
SPECIfICATIONs:
SHOP FURNITURE
SPECIfICATIONs:
Minimum space required: 7' h x 3' w x 15' l Electrical service: 120 volts Plumbing: 1" at 40 p.s.i./usage rate 12 g.p.m.
Dimensions: 46" h x 40" w x 13" d Electrical service: 2 hp, 20 amps, 3 phase, 208/230 or 460 volt Plumbing: 2" suction line discharge pressure at 40 p.s.i. 1" at 40 p.s.i./usage rate 25 g.p.m.
ITEMs:
132-00105 132-00123
ITEMs:
VEHICLE DETAILING
ACCEssORIEs:
132-00054
NOTE: Requires underground water trap system or underground piping and catch basin. Contact Broadway for blueprints. Local contractor will need to install and plumb underground holding tanks or underground piping.
VEHICLE DIAGNOSTICS
13-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
13-4
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
164-R9700
FORD INTEGRATED DiAGNOSTiC SYSTEM IDS STANDARD PACKAGE This package is for the dealership that needs additional (IDS)
The Ford Integrated Diagnostic System (IDS) is the only equipment that provides complete diagnostic coverage of current and future Ford, Lincoln and Mercury vehicles in North America. This package is the most popular and includes everything a dealership needs for complete vehicle diagnostics.* The VCM is used with all link-based tool applications, and the VMM complements the system with the integration of instrument-based tools.
*
FLUID HANDLING
diagnostic service throughput. This package is used when IDS Advanced Package or Value Package is already in the dealership.
This package was designed for the dealership that already has a VCM. This package allows the dealership to re-use an existing VCM and adds the other components that make up the entire IDS system. A dealership must have an existing VCM before ordering this package.
LIFTING EQUIPMENT
IDS PACKAGES
Diagnostic applications specic to certain models and makes may require additional accessory components.
Dealers can choose from the following IDS Packages, designed with their specic needs in mind and applicable for the components indicated. Components may be ordered separately. 164-R9701 IDS Standard Package 164-R9502 IDS Value Package X
PARTS STORAGE
pACKAGES:
Component Vehicle Measurement Module (VMM) Component Item # 164-R9700 IDS Advanced Package X
POWERTRAIN SERVICE
164-R9508
SHOP FURNITURE
164-R9705
X
STARTING & CHARGING SYSTEMS
164-R9509
X
VEHICLE DETAILING
iTEMS:
164-R9700 164-R9701 164-R9502 164-R9705 164-R9508 164-R9509
Ford Integrated Diagnostic System Advanced Package CALL 1-800-ROTUNDA OpTiON Ford Integrated Diagnostic System Standard Package #1 TO SpEAK WiTH ONE Of OUR Ford Integrated Diagnostic System Value Package KNOWLEDGEABLE EQUipMENT IDS-VCM Kit plus 1-year software subscription Internet-based updates CONSULTANTS. VMM Complete Package Panasonic Toughbook (includes external DVD Drive)
VEHICLE DIAGNOSTICS
14-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
SUppLiED BY: fORD CUSTOMER SERViCE DiViSiON
COLLISION REFINISHING
COLLISION REPAIR
164-R9570
FACILITY
FLUID HANDLING
164-R9705
164-R9503
164-R9602
ACCESSORIES:
164-R9503 164-R9536 164-R9570 164-R9600 164-R9601 164-R9602 164-R9603 164-R9605 164-R9612 164-R9709
The VCM communicates with all Ford, Lincoln and Mercury vehicles via the 16-pin diagnostic link. This single device is used by all Ford diagnostic software and is the core of the modular strategy. A VCM license provides access to all diagnostic software that uses the VCM.
LIFTING EQUIPMENT
FEATURES:
Can be used with multiple PC platforms. Supports 1996 current Ford, Lincoln and Mercury vehicles. Is the only communication device used to connect PC hardware to the vehicle.
VCM/VMM to laptop cable IDS/Laptop to Vehicle Data Recorder VDR adapter kit Wireless card for IDS VCM VCM Power Supply Unit 8' DLC cable for VCM 3' DLC cable for VCM VCM USB Master Host Adapter (PDS) PDS Soft Case US Pendent Cable Vehicle Data Recorder 16 PIN Data Link Connector Cable
PARTS STORAGE
POWERTRAIN SERVICE
*VCM kits do not include a display device or manufacturer specic hardware adapters.
SHOP FURNITURE
NAV-Link Medium-Duty Diagnostic Cable 96 Pin Breakout Box Breakout Harness and Test Leads 3 Banana Plug Harness 12 Pin Breakout Tee Cable 500 OHM Resistor Harness IPR Valve Sensor Breakout Harness Test Adapter used to Pressure the ICP System
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
CALL 1-800-ROTUNDA OpTiON #1 TO SpEAK WiTH ONE Of OUR KNOWLEDGEABLE EQUipMENT CONSULTANTS.
164-R9710
WHEEL SERVICE
14-2
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
164-R9508
FLUID HANDLING
FEATURES:
Fuel pressure test. Fuel leak-down test. Injector flow test. Secondary ignition test. Relative Compression test. Oscilloscope. Digital Multimeter. Current probe functionality.
Battery cable Red probe Black probe Probe tip adapter kit #1 (12 different adapters/ kit) Probe tip adapter kit (8 per kit) Secondary ignition cable set (2) Secondary ignition transducer clip set (8) Coil on plug clip #1 set of 4 clips 50 amp current probe 500 amp current probe Pressure and vacuum transducer Fuel pressure and vacuum adapter kit Transmission extension kit Self test adapter (port C) Carry/black storage case
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
ITEMS:
164-R9508
164-R9571
164-R9572
164-R9573
164-R9574
VMM Complete Package includes all components of 164-R9571, 164-R9572, 164-R9573 and 164-R9574 VMM Basic Measurement Package includes battery cable, VMM to laptop cable, red probe, black probe and carry/storage case, self-test adapter (port C), (2) probe tip adapter kits VMM Pressure Package includes pressure and vacuum transducer, pressure and vacuum adapter kit and transmission extension kit VMM Ignition Package includes (2) secondary ignition transducer cable set, (2) secondary ignition transducer clip set and coil on plug clip set VMM Probe Package includes 50 and 500 amp current probe
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
CALL 1-800-ROTUNDA OpTiON #1 TO SpEAK WiTH ONE Of OUR KNOWLEDGEABLE EQUipMENT CONSULTANTS.
14-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUppLiED BY: NU-Di CORpORATiON
www.fordrotunda.com
The Multimedia Interface Tester tests the USB, Auxiliary and Bluetooth functions of any vehicle incorporating the SYNC module. The tester has the ability to output (3) distinct audio les though each of the outputs which are fed to the vehicle audio system. The USB and Audio cables are connected to the vehicles corresponding connections. Any of (3) tests are performed by depressing the Test Selector button. An LED will indicate which of the (3) protocols is currently being diagnosed. A Pair button allows the device to pair with the Bluetooth interface. Based on the test results, the vehicles SYNC interface system can be deemed operational or further diagnostic procedures can be performed as directed by the shop manual.
COLLISION REPAIR
NUD105-R0107
FACILITY
FEATURES:
FLUID HANDLING
Powered by USB connection, no batteries required. Durable handheld enclosure. Self-contained single unit for easy and fast testing. Each test has a specific audio output. Language selectable: English, French and Spanish. No other diagnostic equipment required. Includes RCA Style adapter for SYNC Gen II.
NUD105-R0108
NUD105-R0109
ITEMS:
D I A G N O S T I C S
LIFTING EQUIPMENT
1-800-ROTUNDA OPTION #1
The 104-Pin Adapter Kits allow you to quickly and accurately pin out specic circuits in the vehicles Powertrain Control Modules Cowl, Transmission and Engine connectors.
PARTS STORAGE
FEATURES:
Used in conjunction with the Rotunda 104-Pin Breakout Box. Provides Powertrain Control Module measurement access while the vehicle is running. Adapters plug into the Engine, Transmission and Cowl cavities. Eliminates damaging connectors, piercing wires and back probing.
POWERTRAIN SERVICE
ITEMS:
SHOP FURNITURE
adapters, carrying case, protective boot and overlay guides NUD105-R0108 For PTEC PCM only. Includes 32-, 58- and 60-way adapters, carrying case, protective boot and overlay guides NUD105-R0109 For all 150-Pin Black Oak, 170- and 190-Pin PCMs. Includes 50- and 70-way adapters, carrying case, protective boot and overlay guides
105-00120-RCA
ABS TESTER
VEHICLE DETAILING
The ABS Tester is designed to test Active Wheel Speed Sensors by measuring the current flow in the sensor circuit and lighting LEDs to determine if the current flow is within specification. If a sensor is operating properly, the sensor output LEDs will toggle as the sensor switches. The current level LED will turn green if the current flow is within specification (or open circuited) or red if there is a short circuit. The module output LED will light if the tester sees the correct battery voltage supplied by the ABS module.
105-R0110
VEHICLE DIAGNOSTICS
ITEMS:
WHEEL SERVICE
105-R0110
ABS tester
1-800-ROTUNDA OPTION #2
14-4
BRAKE SERVICE
1-800-ROTUNDA
SUppLiED BY: NU-Di CORpORATiON
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
NUD420-221
NUD420-167
FACILITY
Probing the vehicle OBD II connector just got a whole lot easier! Now you can quickly take measurements and hook up any diagnostic scan tool in half the time. The OBD II BOB is great for aiding in diagnosing communication link concerns.
FLUID HANDLING
FEATURES:
Close the normally open contact portion of the relay. Determine which half of an output circuit is suspect instantly. Eliminate guessing which terminals to short. Stays securely in relay socket so you are free to diagnose. Eliminate damage to relay socket as a result of probing. Reduce diagnostic time significantly. Works on all vehicles using standard 4- and 5-Pin relays.
FEATURES:
ITEMS:
Provides easy access to all (16) terminals in the vehicle OBD II connector. Eliminates guessing which terminals to probe. Plugs in securely so you are free to diagnose. Eliminates the need to crawl under the dash to probe what you cant see. Eliminates potential damage to vehicle terminals from probing. Provides external connector for any scan tool connection. Enables you to reroute scan tool cables which may interfere with driving during road tests.
LIFTING EQUIPMENT
NUD420-221
PARTS STORAGE
ITEMS:
NUD420-167
1-800-ROTUNDA OPTION #6
1-800-ROTUNDA OPTION #6
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
14-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: ETAS/VETRONiX
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
257-00018
Frequency display divides vehicle into system components and shows which component is causing vibration
LIFTING EQUIPMENT
ETAS MTS 4000 Driveline Balance and Vibration Kit gets the job done quickly and requires only (1) technician to do the job right the first time. The MTS 4000 allows the technician to quickly analyze and pinpoint sources of vibration and perform a dynamic, on-vehicle driveline balance procedure to x the problem without removing a single part from the vehicle. The MTS 4000 prompts the technician through a step-by-step balance procedure, graphically shows the technician where to position balance weights on the driveline and how much weight to add. By adding an optional second vibration sensor (257-00019), the technician can perform a dual-plane balance procedure on long driveshafts. The dual-plane balance procedure saves valuable technician time by allowing both ends of a long driveshaft to be balanced at the same time.
PARTS STORAGE
BENEfiTS:
POWERTRAIN SERVICE
Requires only one technician to do the job right the first time. One tool finds vibration problems and guides the technician to a solution. No guesswork displays guide the technician step-by-step. No mathematics required MTS 4000 does all the calculations. Balance a driveshaft in 20 minutes or less. Isolate causes of vibration in minutes.
SHOP FURNITURE
ITEMS:
257-00018
ACCESSORiES:
STARTING & CHARGING SYSTEMS
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
257-00008 (1) Driveshaft weight kit 257-00011 6 pk. Driveshaft weight kit 257-00013 Driveshaft balance kit 257-00014 Remote trigger switch 257-00020 Phototachometer 257-00021 Magnetic base/mount 257-00022 Reflective tape 257-00023 Metric scale 257-00015 Timing light 257-00031 256MB Compact flash card 257-00026 Storage case for MTS 4000 257-00027 Inductive loop cable 257-00028 RS 232 Cable 257-00029 AC/DC Power supply
MTS 4000 Driveline Balance and Vibration Kit includes: MTS 4000 Analyzer 257-00019 Vibration sensor 257-00025 OBD II Interface cable 257-00020 Phototachometer 257-00021 Magnetic base/mount 257-00022 Reflective tape 257-00023 Metric scale 257-00024 DC Power cable (cigarette lighter adapter)
NOTE: Hardware Warranty and Software Subscription 257-00018 comes with an industry-leading hardware warranty and a minimum 2-year software subscription. A screen prompt on the MTS 4000 will notify the operator when it is time to renew the subscription. During the software subscription period, the service technician will have access to hotline support, software upgrades and service on the MTS 4000 unit.
WHEEL SERVICE
14-6
BRAKE SERVICE
1-800-ROTUNDA
SUppLiED BY: NU-Di CORpORATiON
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FLU77-4
FACILITY
ITEMS:
FLU88-5
ITEMS:
Fluke 88-5A automotive meter
FLU77-4
ITEMS:
of (2) pieces, yellow boot/ blue connector NUD105-R0008 For Lincoln Town Car, Ford Crown Victoria, Mercury Grand Marquis through 92, Aerostar, orange boot/gray connector, bag of (5) pieces NUD105-R0013 For use on any vehicle air bag supplement restraint system utilizing the 3-pin connector, red boot/gray connector, bag of (2) pieces NUD105-R0009
The Flex Probe Kit offers technicians the ability to probe Ford, Lincoln and Mercury vehicle connectors using the proper size mating terminal. Probe tips plug onto standard banana jack test leads for ease of use with all automotive meters. The kit includes (2) sets of matching male and female probes for each terminal conguration unless otherwise specied.
PARTS STORAGE
POWERTRAIN SERVICE
ITEMS:
NUD105-R025D
SHOP FURNITURE
INCLUDES:
ITEMS:
Molded storage case. Set of 4' stackable banana jack patch cords in black and red. Set of #60 alligator clip probes with black and red boots. .060" diameter terminal with gray boot. .110" diameter terminal with green boot. .040" diameter terminal with brown boot. .120" x .027" blade terminal with yellow boot. .200" blade terminal (female only) with blue boot. 1.5 mm x 80 mm blade terminal with purple boot. 2.30 mm x .62 mm blade terminal with orange boot. .64 mm x .80 mm blade terminal with red boot. .64 mm x .64 mm blade terminal with black boot. 2.8 mm x .84 mm blade terminal with light green boot. 6.3 mm x .84 mm blade terminal with violet boot. 9.5 mm x 1.23 mm blade terminal with light brown boot.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
14-7
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUppLiED BY: WORLDWiDE VApOR iNC.
www.fordrotunda.com
COLLISION REFINISHING
VACUTEC SMOKE MACHiNE FUEL EVAP EMiSSiONS SYSTEM TESTER WiTH BUiLT-iN NiTROGEN GENERATOR
COLLISION REPAIR
Utilizing the most advanced patented technology, the VACUTEC 522-B is the most comprehensive, yet simple to operate Evaporative Emissions System (EVAP) tester available today. It meets all Ford engineering standards for leak-testing flex fuel as well as conventional gasoline vehicles.
FACILITY
FLUID HANDLING
The VACUTEC 522-B is the industrys rst EVAP system tester with a patented integrated onboard PSA nitrogen generator. Simply connect the VACUTEC 522-B to compressed air (shop air) and the machine automatically converts the air to high-purity nitrogen, never running out of nitrogen. The testers special Diagnostic Smoke vapor is always delivered to the vehicle in a safe inert medium. Its high nitrogen purity is guaranteed due to its computer controlled nitrogen-purity monitor. A two-minute pass/fail test quickly quanties the size of the leak. The tester also has a unique vacuum-delay feature as well as pressure-delay capabilities in order to identify leaks that may leak under vacuum but not under pressure and vise versa. Finding the leaks is simple. Introduce the special non-toxic Diagnostic Smoke vapor into the system to be tested. Then simply look for the exiting smoke or the fluorescent dye deposited at the exact location of the leak(s).
218-00015
LIFTING EQUIPMENT
USES:
SPECIFICATIONS:
PARTS STORAGE
Approved for flex fuel and conventional fuel EVAP testing. Also finds leaks in induction systems, under-dash vacuum systems, exhaust and EGR systems, throttle bodies, unfiltered and unmetered air systems, wind and water leaks and much more. Tests all low pressure closed system leaks.
FEATURES:
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
Smoke and fluorescent dye identifies the leak(s). Is user rellable. Built-in nitrogen generator always delivers smoke with highpurity nitrogen. Uses Pressure Swing Absorption (PSA) nitrogen technology. Two-minute pass/fail test quickly verifies 0.040 and 0.020 EVAP leaks (capable of verifying leaks much smaller). Built-in future in the event future leak standards change. Performs vacuum-delay test. Performs pressure-delay test. Quickly finds dozens of other types of leaks. All tests are performed with the engine off. Saves hours of diagnostic time. Eliminate costly comebacks. Over 500 tests per solution refill. 100% effective. Power supply: 120 volts, 60 Hz STAR OEM EVAP-approved technology.
Height: 39" (99 cm) Width: 20" (50.8 cm) Depth: 27" (68.6 cm) Weight: 100 lbs. (45.45 kg) Ship weight: 105 lbs. (47.6 kg) Supply pressure: 13.0" H2O (0.032 bar) Operation temperature range: 45 140 F (7.2 60 C) Power supply: 120 volts AC, 60 Hz Smoke supply line: 12' (3.66 m) Power supply line: 10' (3 m) Remote control cable: 10' (3 m) Amperage usage: 6.5 amps Uses shop air (automatically converts to nitrogen)
ITEMS:
Exhaust cone adapter Assorted cap plugs Diffuser for wind and water leak testing OBD II EVAP service port adapter (standard size) 400,000 CP halogen spotlight with 20' cord One additional 16 oz. UltraTraceUV UV-activated fluorescent solution included (Tester arrives full) 218-00012 OBD II EVAP service port adapter (small size)
VEHICLE DIAGNOSTICS
WHEEL SERVICE
14-8
BRAKE SERVICE
1-800-ROTUNDA
SUppLiED BY: WORLDWiDE VApOR iNC.
www.fordrotunda.com
VACUTEC SMOKE MACHiNE LEAK TESTERS WiTH PORTABLE INERT GAS PACK
If your shop is looking for a simple, basic smoke-based leak detector to perform EVAP , vacuum, exhaust, wind/water and other closed system leak tests and you dont need the full diagnostic feature design of the Rotunda 218-00015 (Vacutec 522-B), as seen on adjacent page, then the Rotunda 218-00036 or 218-00035 is for you. See feature comparison chart on this page to help decide among models. The Inert Gas Pack provided was designed for moderate volume EVAP leak tests. Liquid CO2 lasts much longer than if the same cylinder was lled with only gas, and so one full cylinder performs about 25 EVAP tests. The cylinders, including spare cylinders, are inexpensive to rell at most paintball or gas supply merchants. Both basic machines can also connect to large high pressure Nitrogen or Argon cylinders, as well as shop air for non-EVAP leak tests.
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
218-00035
FLUID HANDLING
BENEFITS:
Approved for flex fuel and conventional fuel EVAP testing when used with the Inert Gas Pack. Also finds leaks in induction systems, under-dash vacuum systems, exhaust, throttle bodies, unltered and unmetered air systems, wind and water leaks and much more. Tests most low pressure, closed system leaks.
218-00036 Standard 218-00035 Enhanced 218-00015 Full Features
Find leaks with smoke and dye. UltraTraceUV deposits UV dye at exact location of a leak. Two UltraTraceUV solution bottles included; enough to perform hundreds of tests. Two-year warranty. Second year offered for the 218-00015 for a fee.*
SPECIFICATIONS:
218-00036
LIFTING EQUIPMENT
x x x x x
x x x x x
x* x x x x
OEM-approved. Licensed/patented STAR technology. Will not damage EVAP systems, engine sensors or void factory warranty. Auto EVAP pressure setting. Works with shop air or inert gas. (218-00015 always delivers nitrogen) Auto Shut Off Safety Solenoid; prevents gasoline fumes from exiting EVAP system after machine turns off. Approved for flex-fuel vehicle EVAP testing. When used with Inert Gas Pack, supplied, or other inert gas.* Full range flow meter. Variable smoke flow control. Calibrates for .020"/.040" and can detect leaks of .010" Can detect up to zero leak. Built-in PSA nitrogen generator always delivers pure nitrogen. Vacuum and pressure-decay. Electronic touch pad controls.
Height: 13-1/2" (34 cm) Width: 9" (23 cm) Length: 13" (33 cm) Weight: 23 lbs. (10.4 kg) Shipping weight: 13-1/2 lbs. (6.1 kg) Power supply: 12 volt DC Power consumption: 12 amps Supply pressure: 13.0" H2O Supply volume: 10 liters per minute Operating temperature range: 45 140 F (7.2 60 C) Smoke supply line: 10' (3 m) Power supply line: 10' (3 m)
PARTS STORAGE
POWERTRAIN SERVICE
ACCESSORIES INCLUDED:
218-00039
SHOP FURNITURE
x*
x* x x x
x x
218-00007 218-00014 218-00003 218-00004 218-00033 218-00005 218-00037 218-00038
x x x x x
Two 12 oz. bottles of UltraTraceUV UV-activated fluorescent solution included EVAP service port adapter (standard size) Schrader removal/install tool Exhaust cone Assorted cap plugs set Inert gas pack kit Smoke diffuser Large adapter cone Combination white/UV light with laser
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
14-9
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
14-10
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
006-03536
FLUID HANDLING
The exclusive features of Hunters TC3700 tire changer operate in unison to easily and safely change the worlds toughest new performance tires.
006-03501
FEATUREs:
The center-support clamping table, self-centering quick clamp and adjustable rear column provide the flexibility to easily mount large-diameter wheels. With three easily adjustable clamping heights, the TC3700 requires no flange plates for most reverse wheels and allows the operator to work at the most comfortable position. An optional Bead Press Arm pushes and holds stiff sidewalls in the drop-center position to ease demounting or mounting by greatly reducing stress to the bead (standard on 006-03536 and 006-03537). The TC3700 features powerful, high-torque electric motors. The variable-speed drive system operates at a low speed with increased torque to prevent damage to wheels and tire beads when servicing tough combinations or a faster speed when servicing less difficult combinations. The exclusive hydraulic bead-loosening roller system gently rolls tires off or on rims. With the simple two-finger control, a technician can safely hold the tire with the rollers while spinning the wheel to complete match-mounting procedures. The floating, articulated mounting arm and polymer mounting head follow the rim closely, reducing stress on the bead. The Force Multiplier Arm adds leverage when seating the mounting head and holding it down against the wheel. An integrated wheel lift is available.
The TCX575 leverless tabletop tire changer handles a wide range of wheels with safe, simple operation.
FEATUREs:
The leverless tool head operates with one switch to smoothly insert itself and lift the bead over the rim edge effortlessly. The elimination of bead levers lessens the stress on the operator and prevents potential damage to beads and rims. With the push of a button, the swing arm automatically locks to preset wheel diameter and width positions to speed service of same-size wheels. The powerful 220 volt motor and unique two-speed drive system operates at a low speed with increased torque to prevent damage to wheels and tire beads when servicing tough combinations and at a high speed for less difficult wheels. The twin-cylinder tabletop clamping system handles 12 30" wheels and is adjustable to accommodate different wheel widths. The patented Bead Press System includes multiple pressing arms and a bottom roller disc to aid in clamping, lubricating, demounting and mounting difficult wheel assemblies. The locking lower arm helps demount heavy tires and hold tires in place to complete match-mounting service. An integrated wheel lift is available.
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
ITEMs:
006-03298 006-03299 006-03536 006-03537
ITEMs:
Center-clamp, variable-speed electric tire changer 006-03298 with integrated wheel lift 006-03298 with bead press arm 006-03536 with integrated wheel lift
006-03501 006-03502
High-capacity, tabletop-clamp leverless tire changer 006-03501 with integrated wheel lift
OPTIoNs:
006-03268 006-03348
OPTIoNs:
006-03045
VEHICLE DETAILING
Wheel lift Flange Plate Kit Hunter has additional tire changers and accessories available. Contact your Rotunda representative for more information.
15-1
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING Co.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
006-03346
006-03560
LIFTING EQUIPMENT
PARTS STORAGE
The Auto34 and Auto28 Tire Changers include unique features, automated functions and a powerful, high-torque motor to service all wheel designs effortlessly.
FEATUREs:
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
Safely mount and demount tires without the use of bead levers with the patented self-inserting tool head. Leverless operation relieves stress on the bead and the operator. The center-support clamping table and self-centering quick clamp give the flexibility to easily mount a wide variety of rims up to 34" in diameter for the Auto34 and 28" for the Auto28. The clamping table includes a cam plate that exerts additional gripping force to prevent slippage. The high-torque, variable-speed drive system provides the strength and control to safely handle tough tire and wheel combinations. Simple controls and one foot pedal control virtually all tire changing operations, ensuring the same simple operation on all wheels regardless of the size, design or fitment. A bead press arm comes standard to hold the tire in the drop-center for easier mounting and demounting. Bead-loosening rollers gently roll the bead from the rim without damage and are strong enough to safely hold the tire in place to complete match-mounting procedures. An integrated wheel lift is available.
ITEMs:
006-03345 006-03346 006-03559 006-03560
34" capacity, center-clamp, leverless tire changer 006-03345 with integrated wheel lift 28" capacity, center-clamp, leverless tire changer 006-03559 with integrated wheel lift
OPTIoNs:
006-03347 006-03565 006-03348 006-03566
Wheel lift for 006-03345 Wheel lift for 006-03559 Flange Plate Kit Adapter for 19-1/2 wheels
VEHICLE DIAGNOSTICS
Hunter has additional tire changers and accessories available. Contact your Rotunda representative for more information.
WHEEL SERVICE
15-2
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING Co.
www.fordrotunda.com
Hunters TCX500 series of conventional tire changers combine traditional design features with advanced capabilities to provide superior service with simple operation.
COLLISION REFINISHING
The traditional swing-arm design uses simple mechanical operation and locks rim diameter to speed the service of same-sized wheels. Column height and its distance from the tabletop are optimized for large SUV and light-truck tires. The twin-cylinder tabletop clamping system delivers 40% or more clamping force over single-cylinder designs and handles 11 22" wheels. Extenders/reducers, standard with TCX515 and TCX535 models, expand the range to 6 26" wheels. The tabletop design allows easy access to the bottom bead while ensuring rigidity for large-diameter wheels. The 110/220 volts, high-torque motor easily handles stubborn beads and features the fastest speed in its class. Standard on the TCX515, the Bead Press Arm holds the tire in the proper drop-center position to ease the clamping, demounting and mounting of difficult wheel assemblies. Standard on the TCX535, the patented Bead Press System includes multiple pressing arms and a bottom roller disc to provide effortless assistance to clamping, lubricating, demounting and mounting the toughest combinations. TCX535 and TCX515 models include both steel and polymer mount heads. An integrated wheel lift is available.
FEATUREs:
COLLISION REPAIR
FACILITY
006-03443
FLUID HANDLING
LIFTING EQUIPMENT
ITEMs:
006-03443 006-03508 006-03441 006-03439 006-03442 006-03509 006-03440 006-03438
Conventional tire changer with electric motor and Bead Press System 006-03443 with integrated wheel lift Conventional tire changer with electric motor and Bead Press Arm Conventional tire changer with electric motor Conventional tire changer with air-powered motor and Bead Press System 006-03442 with integrated wheel lift Conventional tire changer with air-powered motor and Bead Press Arm Conventional tire changer with air-powered motor
PARTS STORAGE
006-03441
POWERTRAIN SERVICE
SHOP FURNITURE
OPTIoNs:
006-03046 006-03265 006-03266
Wheel lift for TCX535, TCX515 and TCX505 Drop-center clamp to be used as a traction point or a bead guide Lube roller for TCX515 models help lubrication of the rim and tire for easier demounting
VEHICLE DETAILING
006-03439 Hunter has additional tire changers and accessories available. Contact your Rotunda representative for more information.
VEHICLE DIAGNOSTICS
15-3
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: coATs
www.fordrotunda.com
FEATUREs:
COLLISION REPAIR
Leverless power Duckhead bead lifter the leverless design eliminates traditional tire tools that can mar the surface due to application difculty or operator error. Protective pedestal and center lock design. Built-in adjustable wheel lift controlled through an easy-to-reach pedal, the automated wheel lift eliminates the strenuous process of manually placing heavy tire and wheel assemblies over the clamping chuck. Bead loosening disc and tower. Patented COATS RoboArm applies direct pressure to create a bead lock and provide extra leverage on run flat and low-profile tires.
FACILITY
ITEMs:
104-00807
FLUID HANDLING
104-00807
FEATUREs:
LIFTING EQUIPMENT
ITEMs:
PARTS STORAGE
104-00788 APX90E Tire Changer, electric 104-00789 APX90A Tire Changer, air turntable
ALso AVAILABLE:
104-00793 APX80E Tire Changer, electric. Many of the same features as the APX90
104-00788
FEATUREs:
Clamps wheels 6 22" externally, 8 26" internally. 13 28" Grip-Max clamps available. Robotic arm provides the power needed to change run flats and other tough tires (104-00838 and 104-00839). Manual bead roller forces bead down for easy lubrication. Rim Clamp design for unsurpassed reliability. Nylon duckhead protects expensive alloy wheels. Rim Clamp design ensures proper location of wheel on tabletop.el on tabletop.
ITEMs:
VEHICLE DETAILING
104-00838 104-00839
AccEssoRIEs:
VEHICLE DIAGNOSTICS
104-00803 Grip-Max laminated clamp. 104-00804 28" Grip-Max clamps for X Series tire changers.
ALso AVAILABLE:
104-00822 104-00823
104-00839
WHEEL SERVICE
15-4
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: coATs
www.fordrotunda.com
For easier bead loosening. Fits COATS 50X and 70X Series Rim Clamp Tire Changers. Bump-N-Roll is easy as 1, 2, 3: 1. Roll tire into position. 2. Loosen bead. 3. Bump-N-Roll tire forward for a new loosening location.
BUMP-N-RoLL
COLLISION REFINISHING
fEATUREs:
Reduces operator effort and mistakes. Reduces time required to loosen beads. A must for servicing SUV and other heavy assemblies. Eliminates rolling tire and wheel out, lifting tire and wheel, moving loosener blade out and rolling tire and wheel back into position. Easy user installation.
COLLISION REPAIR
FACILITY
104-00652
FLUID HANDLING
ITEMs:
104-00652
Bump-N-Roll
104-00811
LIFTING EQUIPMENT
104-00810
PARTS STORAGE
104-00808 Dimensions (w x d x h) 35" x 44" x 75" 35" x 44" x 75" 49" x 48" x 76" 49" x 48" x 76" 92" x 102" 92" x 102" 90" x 85" 92" x 85" Power Requirements Air Air/Electric Air Electric Electric Air Electric Air
POWERTRAIN SERVICE
Rim Diameter Range 6 22" 6 22" 6 22" 6 22" 9 30" 9 30" 9 30" 9 30" 10 34"
Maximum Bead Breaker Opening 17" 17" 17" 17" 16" 16" 16" 16"
Bead Breaker Power 3,000 lbs. 3,000 lbs. 3,000 lbs. 3,000 lbs.
SHOP FURNITURE
2,700 lbs.
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
15-5
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
006-03473
COLLISION REPAIR
006-03489
FACILITY
Hunters Road Force diagnostic system performs a simulated road test on the wheel assembly to quickly identify and diagnose tire- and rim-related vibration and pull problems.
The SmartWeight balancer packages fast, accurate, costeffective balancing features to increase productivity while reducing costs.
SMARTWEIGhT BALANcER
FLUID HANDLING
The Road Force roller measures the entire footprint of the tire, including the sidewalls to detect non-balance related issues that affect ride quality. StraightTrak LFM (Lateral Force Measurement) assesses the lateral forces in tires that cause pulls and drifts and provides corrective measures to minimize or eliminate the problem. ForceMatching nds the stiffest area of a tires sidewall and the lowest spot on a rim to be marked and matched to cancel vibration caused by radial force variation. TranzSaver measures and compares tire circumferences as specified by OEs to prevent damage to AWD vehicles.
LIFTING EQUIPMENT
ITEMS:
006-03458 006-03459 006-03460 006-03461 006-03462 006-03463 006-03464 006-03465 006-03466 006-03467 006-03468 006-03469 006-03470 006-03471 006-03472 006-03473
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
Includes wing nut clamp Includes printer and wing nut clamp Includes HammerHead and wing nut clamp Includes HammerHead, printer and wing nut clamp Includes wheel lift and wing nut clamp Includes wheel lift, printer and wing nut clamp Includes HammerHead, wheel lift and wing nut clamp Includes HammerHead, wheel lift, printer and wing nut clamp Includes AutoClamp Includes printer and AutoClamp Includes HammerHead and AutoClamp Includes HammerHead, printer and AutoClamp Includes wheel lift and AutoClamp Includes wheel lift, printer and AutoClamp Includes HammerHead, wheel lift and AutoClamp Includes HammerHead, wheel lift, printer and AutoClamp
SmartWeight technology reduces wheel costs by 33% or more and speeds service with substantially less weight application, check-spins and weight chasing. TPMSpecs presents over one hundred TPMS reset procedures in an easy-to-understand format on-screen. Hunter LCD balancers support the use of a bar code scanner to instantly access vehicle-specific TPMS information by scanning the VIN. (Bar code scanner sold separately.) The optional HammerHead TDC and standard BDC lasers identify the exact locations for precise weight placement. CenteringCheck ensures a mounted wheel is properly centered to ensure the most accurate balance. Automatic Weight Mode Detection eliminates manual selection of balancing modes, reducing service time and possible entry errors. AutoClamp automatically tightens the wheel on the balancer shaft, saving time and effort. AutoClamp is standard on select models. An integrated wheel lift is available on select models.
ITEMs:
006-03474 006-03475 006-03476 006-03477 006-03478 006-03479 006-03480 006-03481 006-03482 006-03483 006-03484 006-03485 006-03486 006-03487 006-03488
AccEssoRIEs:
006-03362 Low-Taper Cones and Adjustable Flange Plate. 006-03360 Low-Taper Cones and Fixed Flange Plate. 006-03147 Direct-Fit Collets, Adjustable Flange Plate and
VEHICLE DETAILING
Storage Trolley.
006-03496 Direct-Fit Collets, Adjustable Flange Plate and
Balancer-Mounted Storage.
006-03142 Direct-Fit Collets, Fixed Flange Plate and Storage
006-03489
Trolley.
VEHICLE DIAGNOSTICS
Includes wing nut clamp Includes printer and wing nut clamp Includes HammerHead and wing nut clamp Includes HammerHead, printer and wing nut clamp Includes wheel lift and wing nut clamp Includes wheel lift, printer and wing nut clamp Includes HammerHead, wheel lift and wing nut clamp Includes HammerHead, wheel lift, printer and wing nut clamp Includes AutoClamp Includes printer and AutoClamp Includes HammerHead and AutoClamp Includes HammerHead, printer and AutoClamp Includes wheel lift and AutoClamp Includes wheel lift, printer and AutoClamp Includes HammerHead, wheel lift and AutoClamp Includes HammerHead, wheel lift, printer and AutoClamp
Balancer-Mounted Storage. Hunter has additional wheel balancers and accessories available. Contact your Rotunda representative for more information.
WHEEL SERVICE
15-6
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: coATs
www.fordrotunda.com
The COATS 1250-3DV Video Balancer is an extremely fast, exceptionally accurate LED balancer designed for front line, high volume shop duty. Why? Because it saves you time everywhere you turn. From the Laser Guided Operation, to the dual operators, to our integrated behind-the-spoke capability, now it is easier than ever to handle all your balancing needs.
COLLISION REFINISHING
FEATUREs:
COLLISION REPAIR
Laser Guided Operation provides laser point accuracy to the user when applying Tape-A-Weight for exact weight placement. 5-second cycle time displays tire imbalances fast and accurately. Capabilities for dual operators, direct weight placement and behind-the-spoke weight placement. Includes modes for static, dynamic and RV functions, as well as (4) different alloy modes with Direct Select weight placement keys, delivering one-touch weight location selection. Automatically Stops and Locks the balancer shaft at the correct placement location for both inner and outer weights.
FACILITY
104-00791
FLUID HANDLING
SPEcIfIcATIoNs:
Balancing modes: 8 Tire diameter: Up to 44" Rim width: 2 20" Maximum tire weight: 160 lbs. Footprint: 60" x 60" Shipping weight: 680 lbs.
ITEMs:
104-00791 104-00792
1250-3DV COATS Video Balancer, 220 volt 1 phase 1250-3DV COATS Video Balancer, 220 volt 3 phase
LIFTING EQUIPMENT
104-00642
ALso AVAILABLE:
104-00769 104-00798 104-00799 104-00775
1250 Laser Guided Balancer Light-duty 775 Balancer, 110 volt 1 phase Medium-duty 1175 Balancer, 110 volt 1 phase
Compatible with all passenger cars and light truck balancers. For use with COATS wheel balancers.
PARTS STORAGE
104-00776
104-00777
Reduces lifting. Helps reduce back strain. 40 mm Basic Passenger Car Coverage Kit. Minimizes damage to adapters or expensive wheels. Includes 40 mm shaft, (3) passenger cones, (1) Effortless horizontal movement when positioning wheel over truck cone, wheel weight pliers, calipers, hub nut, shaft. small pressure cup, spring and rubber lip Faster cycle times. 40 mm Extended Passenger Car Coverage Kit. Increases mounting speed on heavy tires. Includes contents of 104-00775 PLUS short Reduces comebacks by assisting wheel centering. cone, LT cone kit and faceplate extension Self-centering to balancer shaft. 40 mm Premium Passenger & Light Truck Handles most passenger vehicles through medium-duty truck Coverage Kit. Includes contents of 104-00776 wheels. PLUS Pin Plate System with Balancer Mate mobile The optional Wheel Lift Link Plate 104-00762 eliminates storage rack having to bolt lift to floor. bolt lift to floor.
POWERTRAIN SERVICE
SHOP FURNITURE
SPEcIfIcATIoNs:
Minimum diameter: 20-1/2" Maximum diameter: 33-1/2" Maximum weight: 175 lbs. @ 115 145 p.s.i.
VEHICLE DETAILING
ITEMs:
OPTIoNs:
104-00762
VEHICLE DIAGNOSTICS
15-7
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: coATs
www.fordrotunda.com
PIN-PLATE SYsTEMs
COLLISION REFINISHING
FEATUREs:
COLLISION REPAIR
104-00684
FACILITY
One system is both universal and comprehensive. Will cover over 90% of all passenger car and light truck applications. Applies to both hub and lug centric wheels. Most consistent method for providing accurate mountings for a large variety of wheels compared to other adapter combinations. Available in both 28 mm (fits COATS brand) and 40 mm i.d. (fits COATS and other brands). Color coded pins for quick identification.
ITEMs:
104-00703
FLUID HANDLING
104-00684 104-00685
104-00750
Pin-plate system, 1.125" (28 mm) i.d. fits COATS brand Pin-plate system, 1.575" (40 mm) i.d. fits COATS and other brands
INcLUDEs:
FEATUREs:
LIFTING EQUIPMENT
PARTS STORAGE
Multiple plates to choose from. Most popular bolt patterns. Pick the plate or plates for the patterns most common in your shop. Plate is always set up ready to go. Fixed fingers (held in place with fasteners). Secondary pattern on each plate for less popular wheels. Extremely helpful when balancing custom wheels with multiple bolt patterns. Available in 1.125" (28 mm) and 1.575" (40 mm) i.d. (11) hook wall storage panel available (104-00703).
Pin-plate numbers 1 4. Wall-mount 11-hook storage panel. (3) sizes of color coded pins. Pin storage basket. Hole gauge. Application chart. Video. Instructions.
OPTIoNs:
ALso AVAILABLE:
SHOP FURNITURE
Item # 104-00710 104-00711 104-00712 104-00713 104-00715 104-00742 104-00743 104-00744 104-00745
104-00746 104-00747 104-00748 104-00749
Description ffp* 1a, 4 x 100 mm, 4 x 108 mm ffp* 2a, 4 x 114.3 mm, 4 x 108 mm ffp* 3a, 5 x 100 mm, 5 x 108 mm ffp* 4a, 5 x 114.3 mm, 5 x 108 mm ffp* 6a, 5 x 112 mm, 5 x 130 mm ffp* 9a, 5 x 5.5", 5 x 6.5" ffp* 10a, 5 x 135 mm, 5 x 4.25" ffp* 11a, 8 x 6.5", 6 x 127 mm ffp* 12a, 8 x 170 mm, 6 x 135 mm ffp* 13a, 5 x 150 mm, 5 x 110 mm ffp* 1b, 4 x 100 mm, 4 x 108 mm ffp* 2b, 4 x 114.3 mm, 4 x 108 mm ffp* 3b, 5 x 100 mm, 5 x 108 mm ffp* 4b, 5 x 114.3 mm, 5 x 108 mm ffp* 6b, 5 x 112 mm, 5 x 130 mm ffp* 9b, 5 x 5.5", 5 x 6.5" ffp* 10b, 5 x 135 mm, 5 x 4.25" ffp* 11b, 8 x 6.5", 6 x 127 mm ffp* 12b, 8 x 170 mm, 6 x 135 mm ffp* 13b, 5 x 150 mm, 5 x 110 mm
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
15-8
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: coATs
www.fordrotunda.com
FEATUREs:
COLLISION REFINISHING
COLLISION REPAIR
104-00693
FACILITY
ITEMs:
104-00693 104-00694
XL PREssURE DRUMs
FEATUREs:
8.375" o.d. Rubber lip to help prevent marring the wheel. Available in 1.125" (28 mm) i.d. and 40 mm i.d.
104-00695
GENERAL SHOP EQUIPMENT
ITEMs:
104-00695 28 mm i.d. fits COATS brand 104-00696 40 mm i.d. fits other brands
LIFTING EQUIPMENT
PARTS STORAGE
ITEMs:
104-00691 Front cone kit 28 mm i.d. 104-00692 Front cone kit 40 mm i.d.
104-00673
POWERTRAIN SERVICE
FEATUREs:
SHOP FURNITURE
ULA 3 coNE
fEATUREs:
The Rotunda ULA 3 cone and fixed finger plate 12b are specifically designed to be used together on 2004 2005 F-150, 2003 2005 Expedition and Navigator wheels. They will improve the quality of any regular balance job for the listed vehicles and in addition will improve your chances of success when troubleshooting a vibration or steering nibble complaint.
104-00763
ITEMs:
VEHICLE DETAILING
104-00669 Offset truck wheel adapter hub centric 28 mm 104-00673 104-00763 104-00800 104-00801
i.d. kit Offset truck wheel adapter 40 mm ULA 3 Cone In-between Cone Set 40 mm In-between Cone Set 28 mm
VEHICLE DIAGNOSTICS
15-9
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
Increase your shops productivity and protability with the most advanced alignment equipment in the industry. Hunters HawkEye Elite systems elevate alignment service to a new level of productivity. Patented QuickGrip adapters and three dimensional targets work with high-resolution camera sensors and the most powerful alignment software in the industry to help shops take full advantage of one of the most profitable auto services.
006-03581
COLLISION REPAIR
FACILITY
FLUID HANDLING
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
Includes powerful Intel processor, running Hunters latest version of WinAlign alignment software on a Windows 7 operating system. Features the most extensive vehicle information database in the industry, including over 30 years of vehicle specifications and vehicle-specific procedures to guide alignment adjustments. Patented, high-resolution four-camera system continuously monitors targets at each wheel and instantly updates adjustment reading on-screen. 3D modeling of wheel position and orientation provide the most accurate alignment measurements. Quick roll-forward compensation, exclusive to Hunter, allows a technician to compensate all four wheels and capture initial measurements in one motion. A digital library of instructional videos, vehicle-specific photos and illustrations can be used to educate technicians and customers alike. Detailed color printouts help explain needed parts and repairs and document completed work. The award-winning CodeLink steering system reset device and a VIN bar code scanner are included as standard features. Software supports the use of a drive-on camera to assist with positioning the vehicle on the lift and the TouchRemote feature, which allows operation of the system remotely using an Apple iPhone, iPod touch or iPad device. 22" touchscreen display is available for all console models. * Drive-on camera sold separately. TouchRemote feature requires free app from iTunes and iPhone, iPod touch or iPad device, sold separately.
FEATUREs:
006-03569
QUIckGRIP ADAPTERs AND ThREEDIMENsIoNAL TARGETs PRoVIDE sET-UP TIMEs IN sEcoNDs INsTEAD of MINUTEs
FEATUREs:
Spring-loaded clamping arms adjust easily to various wheel sizes. Simple, one-touch thumb lever locks the clamp in place no more knob twisting. Grips tire tread instead of the rim edge, removing the worry of metal-to-metal contact. Contains no electronics and requires very little maintenance. Shop-tough polymer construction withstands accidental drops. Entire adapter and target assembly weighs only 6 lbs., making it easy to handle, and its compact profile easily fits between narrow lift posts. Standard quick-change arms cover assemblies up to 37" in diameter.
SHOP FURNITURE
VEHICLE DETAILING
Hunter consoles provide seamless integration with the Ford Professional Technician Society (PTS) website, giving technicians one-click access to all of the information PTS has to offer.
VEHICLE DIAGNOSTICS
Hunter has additional alignment consoles and accessories available. Contact your Rotunda representative for more information.
WHEEL SERVICE
15-10
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Console-mounted sensors allow easy mobility to service multiple bays with one system. The manually movable sensor boom provides full range of travel for additional lift height or aligning a vehicle on the floor. 006-03582 Console-mounted sensors for large consoles 006-03584 Console-mounted sensors for compact consoles Vertically adjustable sensors for additional lift height or aligning a vehicle on the floor. 006-03579 Manually operated sensor boom 006-03586 Electronically operated sensor boom
PARTS STORAGE
006-03581 Fixed-column
006-03579
POWERTRAIN SERVICE
SHOP FURNITURE
006-03578 Wall-mount sensors for straight or herringbone approach bays. Can also be mounted to the ceiling for drive-through applications.
VEHICLE DETAILING
HawkEye Elite Sensors require a WA400 series console with WinAlign 12.0 or greater software. Hunter has additional alignment consoles and accessories available. Contact your Rotunda representative for more information.
VEHICLE DIAGNOSTICS
15-11
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
Hunters next generation of four-post lifts offer greater capacities and capabilities to service everything from passenger cars to box trucks.
GENERAL SHOP EQUIPMENT
LIFTING EQUIPMENT
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
Massive 18,000 lb. lifting capacity. Includes the most powerful motor of any comparable four-post lift on the market. PowerSlide locks and unlocks turnplates and slip plates, removing the hassle of removing and replacing lock-pins. PowerSlide slip plates are standard with select models. PowerSlide turnplates are optional. Inflation Station places integrated air hoses at each wheel position to automatically set tire pressure to a pre-selected limit for each wheel simultaneously without cumbersome hoses and repeated gauge checks. Inflation Station is standard on select models. Optional AlignLights eliminates the problem of working in shadows under a raised vehicle by providing permanent under-vehicle illumination. Easy and safe drive-on with 22.5" runways and integrated rub rails. Ratcheting safety locks ensure alignment level at all (16) lock positions, rising up to 75". An integrated air line kit is standard, providing connections at the front and rear for air tools and jacks. Flush-mounted, full-floating 80" slip plates allow the vehicles rear suspension to relax for maximum alignment accuracy. Optional 9,000 lb. capacity swing air jacks lift vehicles off the runways.
FEATUREs:
OPTIoNs:
006-03087
006-03431 006-02676
006-03512
PowerSlide stainless steel turnplates with automatic bridges for use with camera sensors (set of two) AlignLights lighting kit Approach ramp extensions, adds 17.5" (set of two) Extra-long approach ramp extensions, adds 40" (set of two)
sPEcIfIcATIoNs:
Item # Maximum vehicle weight Maximum wheelbase General service 2-wheel alignment 4-wheel alignment 193" 177" 158" 227" 211" 158" 006-03423 18,000 lbs. 006-03427 18,000 lbs.
ITEMs:
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
006-03429 006-03430
18,000 lb. capacity, open-front four-post lift 006-03423 with two 9,000 lb. capacity swing air jacks 006-03424 with PowerSlide slip plates 006-03425 with Inflation Station 18,000 lb. capacity, closed-front four-post lift 006-03427 with two 9,000 lb. capacity swing air jacks 006-03428 with PowerSlide slip plates 006-03429 with Inflation Station Hunter has additional alignment lifts and accessories available. Contact your Rotunda representative for more information.
WHEEL SERVICE
15-12
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
The RX scissor design requires minimum bay length, provides clear access to the vehicle and jacks, and offers optional features to improve productivity. Available in 10,000 and 12,000 lb. lifting capacities. Surface-mount RX10 models provide best-in-class lowered height of only 8-3/4". PowerSlide locks and unlocks turnplates and slip plates, removing the hassle of removing and replacing lock-pins. PowerSlide slip plates are standard with select models. PowerSlide turnplates are optional. Inflation Station uses integrated air hoses at each wheel position to automatically set tire pressure to a pre-selected limit for each wheel simultaneously without cumbersome hoses and repeated gauge checks. Inflation Station is standard on select models. Optional AlignLights eliminates the problem of working in shadows under a raised vehicle by providing permanent under-vehicle illumination. Optional lift brackets store targets and adapters within arms reach of each wheel to save steps. Ratcheting safety locks ensure alignment level at all (18) lock positions. The patented low-voltage feedback system keeps the runways level and safely stops the lift if an obstruction is encountered. Extra-wide 24" runways allow easy positioning of a vehicle on the lift. An integrated air line kit is standard, providing connections at the front and rear for air tools and jacks. Space-saving, shallow-pit installation, which sets the runways flush to the floor when fully lowered, is available for all RXmodels.
006-02760 12,000 lb. capacity scissor lift 006-02762 006-02760 with two 6,000 lb. capacity swing air
jacks
006-02978 006-02760 with PowerSlide slip plates and two
FACILITY
FEATUREs:
jacks
00602980 006-02763 with PowerSlide slip plates and two
FLUID HANDLING
OPTIoNs:
LIFTING EQUIPMENT
PARTS STORAGE
sPEcIfIcATIoNs:
Item # Maximum vehicle weight 006-02760 006-02761 006-03539 006-03547
POWERTRAIN SERVICE
12,000 lbs.
12,000 lbs.
10,000 lbs
10,000 lbs.
ITEMs:
006-03539 10,000 lb. capacity scissor lift 006-03541 006-03539 with two 6,000 lb. capacity swing air 006-03543 006-03545 006-03547 006-03549 006-03551 006-03553
SHOP FURNITURE
jacks 006-03539 with PowerSlide slip plates and two 6,000 lb capacity swing air jacks 006-03539 with Inflation Station, PowerSlide slip plates and two 6,000 lb. capacity swing air jacks Extended 10,000 lb. capacity scissor lift 006-03547 with two 6,000 lb. capacity swing air jacks 006-03547 with PowerSlide slip plates and two 6,000 lb. capacity swing air jacks 006-03547 with Inflation Station, PowerSlide slip plates and two 6,000 lb. capacity swing air jacks
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
Hunter has additional alignment lifts and accessories available. Contact your Rotunda representative for more information.
15-13
WHEEL SERVICE
BRAKE SERVICE
1-800-ROTUNDA
SUPPLIED BY: HUNTER ENGINEERING CO.
www.fordrotunda.com
COLLISION REFINISHING
COLLISION REPAIR
FACILITY
FLUID HANDLING
The RMHD heavy-duty parallelogram design provides exceptional lifting capabilities, while requiring minimal bay width. 16,000 lb. lifting capacity. Easy and safe drive-on with 22.5" runways and integrated rub rails. Ratcheting safety locks ensure alignment level at all (20) lock positions, rising up to 65". An integrated air line kit is standard, providing connections at the front and rear for air tools and jacks. Flush-mounted, full-floating 80" slip plates allow the vehicles rear suspension to relax for maximum alignment accuracy. Unique safety controls shut down the system if an obstruction is encountered and alert the technician when the lift is not on the locks. Optional 8,000 lb. capacity swing air jacks add capability for lifting vehicles off the runways.
ITEMs:
006-02803 16,000 lb. capacity, heavy-duty parallelogram lift 006-02804 006-02803 with two 8,000 lb. capacity swing air
jacks
LIFTING EQUIPMENT
sPEcIfIcATIoNs:
Item # Maximum vehicle weight Maximum wheelbase General service 2-wheel alignment 4-wheel alignment 190.5" 177.5" 158" 006-02803 16,000 lbs.
PARTS STORAGE
POWERTRAIN SERVICE
SHOP FURNITURE
VEHICLE DETAILING
VEHICLE DIAGNOSTICS
WHEEL SERVICE
15-14
1-800-ROTUNDA
www.fordrotunda.com
345 CAR-O-LINER
3529 W. 6th Ave. Emporia, KS 66801 1-877-343-7703 Fax (620) 343-7705 www.hoppyaimers.com
Headlamp Aimers
343 ARTLUX
2011
115 Reems Creek Road Weaverville, NC 28787 1-800-747-5300 Fax 1-800-763-0840 www.balcrank.com e-mail: info@balcrank.com
Automotive Lubrication Equipment
2011 1301 East 9th Street, Ste. 700 Cleveland, OH 44114 (216) 430-5751 Fax (216-592-1628)
Key Cutter/Duplicator
New for
961 Alness Street Toronto, Ontario M3J 2J1 CANADA 1-800-526-7096 Fax (416) 736-9138
A/C Equipment
304 CURTIS-TOLEDO
1905 Kienlen Ave. St. Louis, MO 63133 1-800-925-5431 Fax (314) 381-1439
Air Compressors
8361 Town Center Court Baltimore, MD 21236-4964 1-800-229-3380 Fax (410) 931-0053
Aqueous Parts Washing Equipment
16-1
1-800-ROTUNDA
www.fordrotunda.com
Lubrication Equipment
Fax 1-800-533-9656
(417) 725-6400
164-R3800 to 164-R3899 Petoskey Plastics Interior Protection 164-R3910 to 164-R3924 Richardson Seating Stools 164-R4025 to 164-R4049 Monroe PMP Paint Thickness Gauge
164
HELM, INC.
2-way Radios
16-2
1-800-ROTUNDA
www.fordrotunda.com
335 MISCO
3401 Virginia Rd. Cleveland, OH 44122 1-800-358-1100 (216) 831-1000 Fax (216) 831-1195
DEF Tester
1601 JP Hennessy Dr. LaVergne, TN 37086-3565 Customer Support Phone: 1-800-688-6359 Option 1
Wheel and Brake Service Equipment
12730 Triskett Road Cleveland, OH 44111 (216) 251-9070 Fax (216) 251-6728
Electrical Test Equipment
151 Snyder Avenue Barberton, OH 44203 1-800-433-0708 Fax (330) 753-6419 e-mail: customerservice@johndow.com
1425 Stagecoach Road Shakopee, MN 55379 1-800-800-9274 Fax (952) 445-0231 email: cklein@nustarinc.com
Vehicle Moving Equipment
P .O. Box 2627 Rocky Mount, NC 27802-2627 1-800-334-1381 Fax (252) 446-4702
Keys and Key Cutting Equipment
7664 Fullerton Rd. 2011 Springeld, VA 22153 (703) 485-8935 email: James.Boiler@OfceDepot.com
Keurig Coffee Machines, Supplies
New for
302 LOCK-N-STITCh
1015 S. Sonderquist Road Turlock, CA 95380 e-mail: garyreed@locknstitch.com Technical Support 1-800-736-8261 (209) 632-2345 Fax (209) 632-1740
Spark Plug Repair Kit
2100 Park Dr. Owatonna, MN 55060 1-800-533-6127 (Option 1) then (Option 3) Electrical Test Equipment Repair (Option 1) then (Option 1) Technical Support and Repair: Portable Lifts, Electrical Test Equipment, Tool Storage, MacPherson Strut Equipment, and Miscellaneous (Option 1) then (Option 2) Battery Test Equipment
10 Technology Drive, Unit 4 West Lebanon, NH 03784 1-800-543-6618 Fax (603) 298-8404 www.procutinternational.com
On-Car Brake Lathes
16-3
1-800-ROTUNDA
www.fordrotunda.com
422 Anglum Rd. Hazelwood, MO 63042 (314) 699-9613 Fax (314) 699-9617
Strut Compressor, Tire and Wheel Lift
33235 W. Seven Mile Rd. Livonia, MI 48152 (248) 473-1520 Fax (248) 473-8816 Fuel Tankers
2700 Lanier Drive Madison IN 47250 Sales/Product Parts/Service Information 1-800-445-5438 Fax 1-800-822-6502
Lifting Equipment
One Samson Way Swannanoa, NC 28778 1-800-311-1047 Fax 1-800-699-2603 www.samsoncorporation.com e-mail: info@samsoncorporation.com
2030 Alameda Padre Serra Santa Barbara, CA 93103-1716 1-800-321-4889 (805) 966-2000 Option 7 www.etas.com e-mail: servicecenter@vetronix.com
Diagnostic Solutions for Vehicle Electronics
Lubrication Equipment, Fluid Inventory Control and Management Systems, Bulk Fluid Packages, DEF Systems
17852 Gothard St. Huntington Beach, CA 92647 1-888-822-8832 Fax (714) 433-2840 e-mail: info@vacutec.com www.vacutec.com
Leak Detection
Workbenches, Carts, Transmission Benches, Tool Storage, Tire/Wheel Merchandise Displays and Storage Cabinets
1738 Maplelawn Blvd. Troy, MI 48084 1-800-783-9826 1-800-215-5160 In Michigan (248) 643-6666 Fax (248) 643-6530
2651 West 81st St. 2011 Hialeah, FL 33016 Customer Service Department 1-800-222-0956
New for
16-4
1-800-ROTUNDA
www.fordrotunda.com
006 HUNTER ENGINEERING Item # 006-00051 006-0051A 006-01307 006-01658 006-01719 006-01762 006-01763 006-01809 006-02055 006-02509 006-02510 006-02511 006-02513 006-02522 006-02523 006-02530 006-02531 006-02538 006-02539 006-02545 006-02549 006-02550 006-02557 006-02560 006-02562 006-02564 006-02565 006-02569 006-02572 006-02573 006-02574 006-02579 006-02580 006-02587 006-02588 006-02589 006-02591 006-02594 006-02595 006-02598 006-02601 006-02605 006-02622 Model # 25-24-1 20-1142-1 138-83-1 51-754-1 46-433-2 20-1207-1 20-823-1 20-551-1 20-593-1 20-1192-1 20-719-1 20-1097-1 20-996-1 20-485-1 20-631-1 20-1259-1 20-1258-1 RP6-70201E RP6-70210E 69-788-2 20-1403-1 20-1423-1 20-1427-1 20-1328-1 148-133-2 175-236-1 106-82-2 65-72-2 20-1493-1 192-92-2 20-1446-1 RP6-4140 175-159-1 20-1490-1 20-1396-2 20-1397-2 20-1398-2 20-1378-1 20-1333-1 20-1236-1 192-86-2 BL505-B 20-1450-1 Description GAUGE-TRUCK TURNING 20-1142-1 SPINNER 8HP 3PH 208 PLATE-SLIDE REAR PLASTIC RING TRUCK CONE KIT RIM STUD EXTENSIONS SPADE KIT SLEEVE COMMUNICATIONS INTERFACE KIT REAR LEVEL PLATE KIT WIRING KIT, 2 BOX METAL WHEEL ADAPT EXTENSION AIR LINE KIT BOLT KIT PLASTIC EXTENSION. WIRING KIT CD VIDEO MEMORY UPGRADE FOR 411 POLYMER INSERT KIT MOUNTING CLAMP COVER JACK RISERS RAMP EXTENDER INSTRUMENT KIT CONE KIT AND SPACER RING OIL LUBE DEEP DRUM ADAPTER FOR BL500 SCRATCH GUARD-SUPER CALIBRATION WEIGHT WHEEL SPACER LARGE TRUCK CONE SAFETY HOOK ADAPTERS FLANGE ADAPTER 1 7/8 ARBOR KIT EXP TRUCK KIT HEAVY DUTY EXP TRUCK KIT MED DUTY EXTRA DUTY ADAPTERS TRUCK KIT 1 ARBOR BUSHING KIT DRAWER CENTERING CONE BRAKE LATHE DUAL VIDEO BOARD Page #
16-5
1-800-ROTUNDA
Item # 006-02623 006-02626 006-02639 006-02640 006-02641 006-02642 006-02643 006-02644 006-02648 006-02649 006-02650 006-02653 006-02670 006-02673 006-02674 006-02676 006-02677 006-02678 006-02679 006-02682 006-02693 006-02694 006-02697 006-02701 006-02706 006-02709 006-02711 006-02712 006-02713 006-02726 006-02728 006-02733 006-02736 006-02737 006-02738 006-02740 006-02743 006-02744 006-02745 006-02746 006-02747 006-02748 006-02752 006-02755 006-02756 Model # 20-1498-1 20-1273-1 PF 20-869-1 123-13-1 123-15-1-001 51-555 118-11-1-001 20-1517-1 11-637-1 20-1513-1 64-76-2 20-967-1 20-1587-1 20-1622-1 20-1365-1 46-372-1 64-50-2 133-62-1 20-1451-1 133-67-1 51-1696-1 20-1605-1 20-1112-1 20-1602-1 221-541-1 RP6-3184 RP6-2252 RP6-70200E RP9-9032.0561 RP9-9032.0793 RP9-9032.0850 RP9-9032.0858 RP9-9032.0859 20-1425-1 46-475-2 20-1418-1 20-1503-1 RP9-5398.0337R RP9-5398.0337L 221-538-3 RP9-9032.0861 20-1558-1 20-1453-1 192-54-2 Description HI SPEED MODEM MODULE 3 JAW CHUCK ADAPTER KIT
www.fordrotunda.com
Page #
HEAVY DUTY TRUCK AND BUS PIT RACK-18,000 LB T-PIT RAIL KIT 30" STEEL STAIRWAY 36" STEEL STAIRWAY WEAR PLATE WORK BEAM EXTRA 10' FOR T-PIT KIT SELSON JACK TRAY NEW STYLE WHEEL STOP PRE-PRINTED PRINTER HEAVY DUTY-STOPLIGHT KIT L421 RUNWAY EXTENSION KIT DRIVE-THRU KIT RAMP EXTENSION KIT FILLER PLATES RUBBER JACK PAD (2) REQUIRED SWING AIR JACK 8000LB CAP NETWORK MODULE SWING AIR JACK ADDITIONAL WORK STEP PRINTER KIT INCLUDES DOT-MATRIX PRINTER BOLT DOWN KIT AL-TRUCK CHUCK KIT SHAFT REMOVAL TOOL TIRE-TO-WHEEL MATCHING STEEL WHEEL JAW PLASTIC-COATED MAG TOOL RP9-9032.0561 RP9-9032.0793 RP9-9032.0850 RP9-9032.0858 RP9-9032.0859 OCL360 FEED UPGRADE KIT OCL360 SPACER CARBIDE INSERT KIT WITH HARDWARE OCL360 ADAPT ACCESS KIT HOLDER, ROUND INSERT - OCL HOLDER, ROUND INSERT - OCL TOOL INSERTS AND MOUNTING SCREWS RP9-9032.0861 TIRE CLAMP KIT (SET OF 4) SOFTWARE UPGRADE GSP STANDARD CONE 15-12
16-6
1-800-ROTUNDA
Item # 006-02757 006-02759 006-02760 006-02761 006-02762 006-02763 006-02764 006-02765 006-02766 006-02767 006-02770 006-02775 006-02776 006-02777 006-02778 006-02779 006-02780 006-02781 006-02782 006-02783 006-02789 006-02790 006-02791 006-02793 006-02796 006-02803 006-02804 006-02805 006-02806 006-02807 006-02808 006-02809 006-02810 006-02811 006-02812 006-02813 Model # 192-96-2 20-1638-1 RX-12-L RX-12-XL RX-12-L-43 RX-12-XL-43 RX-12-L-P RX-12-XL-P RX-12-L-43-P RX-12-XL-43-P 20-1644-1 BL505-A BL505-AB BL505D-A BL505D-AB 20-1665-1 20-1666-1 20-1667-1 20-1668-1 222-38-2 20-1506-1 20-1664-3 175-288-1 20-1710-1 20-1691-1 RMHD RMHD-43 133-69-1 DSP508 DSP508-RH DSP508XF DSP508XF-RH DSP506 DSP506-RH DSP506XF DSP506XF-RH Description IN BETWEEN CONE LIFT TOOL TRAY 12,00O # RX, 161' WHEELBASE 12,000# RX, 173' WHEELBASE
www.fordrotunda.com
Page #
12000LB RX 161' WITH SWING AIR JACK 12000LB RX 173' WITH SWING AIR JACK ALIGNMENT RACK SHALLOW PIT ALIGNMENT RACK SHALLOW PIT ALIGNMENT RACK SHALLOW PIT ALIGNMENT RACK SHALLOW PIT EXTENSION FOR TC3250 AND TC3500 BL505, NO BENCH, NO ADAPTERS BL505 AND BENCH, NO ADAPTERS BL505 & DIGI-CAL NO BENCH, NO ADAPTERS BL505 & BENCH & DIGI-CAL MEASURING SYSTEM, NO ADAPTERS LEVEL 1 BRAKE LATHE KIT LEVEL 2 BRAKE LATHE KIT LEVEL 3 BRAKE LATHE KIT LEVEL 4 BRAKE LATHE KIT ANTI-CHATTER CHAIN POLYMER HEAD TIRE CHANGER MAINTENANCE KIT Hunter EngineeringPRO ROTOR ADAPTER TRUCK FRONT MINI ADAPTER STRAIGHTTRAK RETROFIT KIT BAL PRO ADAPTERS WITHOUT CHUCK KIT 16000LB LIFT RACK RM/HEAVY DUTY PARALLEL LIFT RACK WITH SWING AIR JACKS 6,000# SWING AIR JACK 4 OPTICAL SENSORS WITH REAR TOE ARMS & SELF-CENTERING WHEEL ADAPTERS 4 OPTICAL SENSORS WITH REAR TOE ARMS & SELF-CENTERING WHEEL ADAPTERS & RIDE HEIGHT 4 CORDLESS OPTICAL SENSORS WITH REAR TOE ARMS & SELF-CENTERING WHEEL ADAPTERS 4 CORDLESS OPTICAL SENSORS WITH REAR TOE ARMS & SELF-CENTERING WHEEL ADAPTERS & RIDE HEIGHT 4 OPTICAL SENSORS WITH SELF-CENTERING WHEEL ADAPTERS 4 OPTICAL SENSORS WITH SELF-CENTERING WHEEL ADAPTERS & RIDE HEIGHT 4 CORDLESS OPTICAL SENSORS WITH SELF CENTERING WHEEL ADAPTERS 4 CORDLESS OPTICAL SENSORS WITH SELF CENTERING WHEEL ADAPTERS & RIDE HEIGHT
15-14 15-14
16-7
1-800-ROTUNDA
Item # 006-02828 006-02835 006-02836 006-02837 006-02838 006-02839 006-02840 006-02841 006-02842 006-02843 006-02844 006-02845 006-02846 006-02848 006-02849 006-02852 006-02853 006-02854 006-02855 006-02856 006-02857 006-02858 006-02860 006-02861 006-02862 006-02871 006-02872 006-02873 006-02874 006-02875 006-02876 006-02877 006-02878 006-02879 006-02883 006-02884 006-02885 006-02886 006-02887 006-02888 006-02893 006-02894 006-02906 006-02907 006-02915 Model # 20-1760-1 20-1755-1 20-1756-1 20-1720-1 20-1701-1 175-284-1 175-287-1 20-561-1 20-1522-1 20-1643-1 20-1355-1 221-660-1 20-1473-1 221-646-1 194-18-2 11-363-1 221-527-1 25-71-1 25-139-1 20-1592-1 20-1377-1 RP5-43-300A 221-652-1-T PT PE 20-1649-1 EB ED 20-1752-P-1 20-1752-S-1 20-1752-R-1 20-1752-CP-1 20-1752-CS-1 20-1752-CR-1 20-1751-P-1 20-1751-S-1 20-1751-R-1 20-1751-CP-1 20-1751-CS-1 20-1751-CR-1 20-1305-1 20-1788-1 20-1789-1 20-1792-1 25-130-1 Description NETWORK CONNECT CARD SHOPRESULIGHTS.NET 1YR SHOPRESULIGHTS.NET 3YR
www.fordrotunda.com
Page #
WINHEAVY DUTY VER5.2 UPGRADE WHEEL ADAPTER KIT MED SELF CENTER MINI WHEEL SELF CENTER WHEEL ADAPTER STUD AND SLEEVE RIM GUARD TIRE ADAPTERS SLEEVE RIM GUARD KIT ALCOA SPADE ADAPTERS TRAILER GAUGE TOOL ALIGNMENT TRAILER FRAME OFFSET TOOL CORDLESS SENSOR REAR TOE LINE SUPPORT TIRE MEASURING TOOL TURN PLATES 16IN TRUCK/2 REQUIRED TURN PLATES 16IN ELECTRIC TURN PLATES RAMPS ON-FLOOR ALIGNMENT HF SUPPORT BRACKET TRUCK TANDEM SHIM KIT CALIBRATION FIXTURE HEAVY DUTY PT PIT GROUP HEAVY DUTY TRUCK AND BUS PIT RACK - 10,000 LB. 64 TO 128 RAM UPGRADE KIT ON CAR WHEEL BALANCER STROBE BALANCING ASSEMBLY 811P PLUS UPGRADE KIT 811P PLUS UPGRADE KIT 811P PLUS UPGRADE KIT P411/611-811P PLUS S411/611-811P PLUS R411/611-811P PLUS 811 UPGRADE KIT 811 UPGRADE KIT 811 UPGRADE KIT 811 STANDARD UPGRADE WITH COLOR PRINTER STANDARD 811 UPGRADE WITH COLOR PRINTER STANDARD 811 UPGRADE WITH COLOR PRINTER MULIGHTIMEDIA WIRING UPGRADE KIT SOUND UPGRADE KIT TIRE CLAMP 1-24" SCA KIT SCA EXTENSION 28" KIT WHEEL LUG CIRCLE KIT GAUGE
16-8
1-800-ROTUNDA
Item # 006-02916 006-02917 006-02918 006-02919 006-02920 006-02921 006-02922 006-02925 006-02926 006-02927 006-02928 006-02946 006-02947 006-02948 006-02949 006-02950 006-02951 006-02952 006-02953 006-02954 006-02955 006-02956 006-02959 006-02960 006-02962 006-02963 006-02965 006-02966 006-02978 006-02979 006-02980 006-02981 006-02984 006-02985 006-02986 006-02989 006-02990 006-02992 006-02993 006-02995 006-02996 006-03004 006-03005 006-03006 006-03010 Model # RP9-9032.0860 20-1105-1 20-1601-2 RP9-9032.0941 RP9-9032.0877 RP9-9032.0943 RP9-9032.0769 175-324-1 20-1847-1 20-1440-1 20-1846-1 20-1167-1 20-1626-1 20-1839-1 20-1845-1 20-1879-1 20-1910-1 20-1911-1 20-1912-1 20-1929-1 20-1937-1 221-563-1 20-1758-1 BL505D-B 20-1899-1 20-1900-1 DSP506T DSP506TXF RX12L-PS RX12L-PS-P RX12XL-PS RX12XL-PS-P 192-97-2 192-98-2 147-104-1-PPP 192-152-2 20-1885-1 20-1922-1 20-1960-1 20-1970-1 20-1971-1 20-2029-1 25-157-1 RP6-10646 RP6-11522 Description
www.fordrotunda.com
Page #
TROLLEY STAND AND SUPPORT STRUCTURE ANTI CHATTER KIT SHAFT MOUNT DIAL INDICATOR RP9-90320941 5 LUG BELL FLANGE Flange, 6x222mm, 5x203mm, Isuzu Medium Duty Truck RP9-90320943 6 LUG BELL FLANGE RP9-90320769 HEAVY DUTY TOOL HOLDER 9" BAL CUP WITH SLEEVE ADAPTER PRECISION CENTERING KIT 8IN BEAD ROLLERS KIT 3/4 TON IMPORT DUAL COLLET KIT BASIC STANDARD TAPER CONE KIT BASIC LOW TAPER CONE KIT UNIVERSAL FLANGE PLATE KIT P/LIGHT DUAL TAPER COLLETS KIT COLLET STORAGE HANGER KIT HIGH TAPER PREFERRED KIT LOW TAPER PREFERRED KIT Hunter EngineeringPRO PRECISION BAL KIT CONE SET-LARGE TRUCK KIT MED BAL ACCESS KIT WIDTH CALIPER TOOL UNDER CAR INFO.NET - 3 YR. BRAKE LATHE WITH BENCH DIGITAL DSP500 QUICK CLAMP SUPPORT KIT DSP600 QUICK CLAMP SUPPORT KIT FOUR OPTICAL TRUCK SENSORS 4 CORDLESS OPTICAL TRUCK SENSORS RX12L WITH POWER SLIDE RX12L-PS RECESSED LIFT RX12XL WITH POWER SLIDE RX12XL-PS RECESSED LIFT CONE, IN-BETWEEN DSP SIZE, (2.68" - 3.36") CONE, IN-BETWEEN DSP SIZE, (3.21" - 3.89") 12 INCH RAMP EXTENSION FOR RX-12 CONE-CENTERING, 2.7 - 2.9, NO HOOK RIDE HEIGHT REMOTE KIT ADAPTER STORAGE CART KIT ANCHOR PLATE DSP600CM KIT DIGITAL PHOTO KIT DIGITAL PHOTO/VIDEO KIT WIRELESS NETWORK KIT 14" STAINLESS STEEL TURN PLATE 50MM COLUMN SPACER 26" CENTER SHAFT WITH Q COUPLE 15-13 15-13
16-9
1-800-ROTUNDA
Item # 006-03011 006-03012 006-03013 006-03015 006-03016 006-03017 006-03018 006-03019 006-03020 006-03022 006-03023 006-03024 006-03026 006-03027 006-03028 006-03030 006-03033 006-03034 006-03035 006-03036 006-03037 006-03038 006-03039 006-03040 006-03044 006-03045 006-03046 006-03047 006-03048 006-03049 006-03050 006-03051 006-03052 006-03053 006-03054 006-03055 006-03059 006-03060 006-03061 006-03062 006-03063 006-03064 006-03074 Model # RP6-1156 RP6-1157 RP6-12916 RP6-13599 RP6-13613 RP6-13719 RP6-1460 RP6-1506 RP6-1828 RP6-2509 RP6-2643 RP6-2644 RP6-3594 RP6-3595 RP6-3596 RP6-3598 RP6-7136 RP6-8019 RP6-8659 RP6-8703 RP6-8747 RP6-8748 RP6-8794 RP6-8795 20-1184-1 20-2044-1 20-2045-1 20-2013-1 20-2014-1 20-2015-1 20-2016-1 20-2017-1 20-2018-1 20-2019-1 221-675-2 221-675-2-B 194-23-2 20-1612-2 20-1832-1 69-1025-2 69-1187-2 RP11-8-11400078 20-2050-1 Description
www.fordrotunda.com
Page #
CONE COVER, POLYMER WHEEL PROTECTOR TWO SIDED CONE RIM PROTECTOR - BOX OF 50 CAM PLATE ASSEMBLY SPACERS FOR ARMS RUBBER PADS SHORT CONES BRUSH, ANGLED APPLICATOR BEAD LEVER, TRADITIONAL STEEL WHEEL M/D BRACKET, PASTE BUCKET (3.5 KG) WIRE LOOM HEAD M/D, SMALL ALL WHEEL & MOTORCYCLE QUICK CHANGE MOUNTING ARM KIT (NO M/D HEAD INCLUDED) CLAMP CUP (WITH O PROTECTOR RING) PROTECTOR RING FOR CLAMP CUP RP6-3594 CONE, (WITH O SPRING) SHAFT EXTENSION, 3 LONG (TC2000) PLASTIC INSERTS, JAW PROTECTION KIT (TC3100/3000) PLASTIC INSERTS, STEEL MOUNTING HEAD (6 SETS) JAW, EXTERNAL RUBBER CLAMPING SHAFT PROTECTOR POLYMER HEAD MOUNTING KIT (TC3000) POLYMER HEAD MOUNTING KIT (TC3100) STEEL HEAD MOUNTING KIT (TC3000) STEEL HEAD MOUNTING KIT (TC3100) FRONT MOUNT POWER UNIT BRACKET TCX575 Wheel Lift Kit TCX500 WHEEL LIFT KIT RACK LIGHTING KIT RX EVO UPGRADE KIT 26 INCH FITS TC3500SS WO QD SUPPORT EVO UPGRADE KIT 26 INCH FITS TC3500SS WITH QD SUPPORT EVO UPGRADE KIT 26 INCH FITS TC3500 WO QD SUPPORT EVO UPGRADE KIT 26 INCH FITS TC3500 WITH QD SUPPORT EVO UPGRADE KIT 26 INCH FITS TC3250-PLUS WO QD SUPPORT EVO UPGRADE KIT 26 INCH FITS TC3250-PLUS WITH QD SUPPORT MOUNT DEMOUNT HEAD TOOL EACH MOUNT DEMOUNT HEAD TOOL (6PC) 12V, 2.3AH LEAD-ACID BATTERY TSUNAMI WATER SEPERATOR KIT BATTERY CHARGER 5 POS KIT LARGE Equipment COVER MEDIUM/NARROW Equipment COVER BPS FOR TCX500 DSP600 LIVE RIDE HEIGHT TARGETS 15-1 15-3
16-10
1-800-ROTUNDA
Item # 006-03075 006-03076 006-03077 006-03078 006-03079 006-03080 006-03081 006-03082 006-03083 006-03084 006-03085 006-03086 006-03087 006-03088 006-03089 006-03090 006-03092 006-03093 006-03094 006-03100 006-03101 006-03102 006-03106 006-03108 006-03109 006-03110 006-03113 006-03114 006-03115 006-03116 006-03117 006-03118 006-03120 006-03121 006-03122 006-03123 006-03124 Model # 20-2112-1 20-1978-1 20-1979-1 30-419-1 30-421-1 30-418-1 20-2072-1 20-2055-1 20-2056-1 20-2102-1 20-2103-1 20-2109-3 20-2076-1 20-2075-1 20-2074-1 20-2113-1 133-77-2 118-668-2 118-667-2 B414-07-GLV B414-08-GLV B414-09-GLV 20-1570-1 F02-0130000-1 S811-17-SS SS104 20-1905-1 20-1916-1 S511M-17-SS 192-57-2 SS104T 20-1793-1 20-1795-1 20-1796-1 192-51-2 192-52-2 192-53-2 Description
www.fordrotunda.com
Page #
LIVE RIDE HEIGHT ADHESIVE STRIPS KIT ADAPTOR-WHEEL OFF ADAPTOR (SET OF TWO) ADAPTOR-WHEEL OFF ADAPTOR MAGNET ASSEMBLY ICON REMOTE INDICATOR ICON CORDLESS REMOTE INDICATOR PLUS CORDLESS REMOTE INDICATOR (LED) XF2 POD KIT REMOTE HANGER KIT REMOTE HANGER RECHARGE KIT RX FLUSH CONVERSION KIT RX FLUSH CONVERSION KIT KIT, FORD F150 ADAPTOR SET POWERSLIDE TURNPLATE WITH AUTOMATIC BRIDGE POWERSLIDE TURNPLATE WITHOUT AUTOMATIC BRIDGE POWERSLIDE BRIDGE 50MM LOW-FRICTION STAINLESS TURNPLATE KIT HD PIT JACK, 35200 LBS CAPACITY ROLLING JACK HD CROSS BEAM ADAPTOR, USED TO SPREAD ADAPTOR LIST POINTS HD TWIN LIFT ADAPTOR, USED WHEN MORE THAN 17,600 LBS OF LOAD NEED LIFTED AT A SINGLE POINT CONFIGURATION 07 FOUR BRAKE PLATES CONFIGURATION 08 FOUR BRAKE PLATES CONFIGURATION 09 FOUR BRAKE PLATES SA400 STAINLESS STEEL COVERS B414/111 SOFTWARE S811M CONSOLE WITH 17 INCH SVGA DISPLAY SIDESLIP METER PLATES ONLY BRIDGE SET ELECT TURNPLATES KIT 1 - 147-78-1 RAMPS AND HARDWARE KIT S511M CONSOLE WITH 17 INCH UVGA DISPLAY CONE, GSP BALANCER LOW DEGREE TAPER, 4.24 INCH 5.13 INCH TRUCK STATIONARY SIDESLIP METER PAX ORBITER KIT TC3500 PAX UPGRADE KIT TC3100-PLUS PAX UPGRADE KIT CONE, GSP BALANCER LOW DEGREE TAPER, 1.75 INCH 2.20 INCH CONE, GSP BALANCER LOW DEGREE TAPER, 2.20 INCH 2.50 INCH CONE, GSP BALANCER LOW DEGREE TAPER, 2.50 INCH 2.87 INCH 15-12, 15-13
16-11
1-800-ROTUNDA
Item # 006-03125 006-03126 006-03128 006-03130 006-03132 006-03133 006-03134 006-03135 006-03136 006-03137 006-03138 006-03139 006-03140 006-03141 006-03142 006-03143 006-03144 006-03145 006-03146 006-03147 006-03148 006-03149 006-03150 006-03159 006-03160 006-03186 006-03187 006-03188 006-03190 006-03191 006-03192 Model # 192-55-2 192-56-2 20-1313-1 221-678-3 20-1864-1 175-390-2 175-391-2 175-392-1 20-2110-1 20-2123-2 20-2124-2 20-2137-2 20-2140-1 20-2141-1 20-2142-1 20-2143-1 20-2144-1 20-2152-1 20-2153-1 20-2154-1 20-2156-1 76-432-1 76-433-1 106-157-2 175-389-2 BL505DC-AB BL505C-AB 20-2122-1 20-2035-1 RP9-9040.3126 RP9-9040.3127 Description
www.fordrotunda.com
Page #
CONE, GSP BALANCER LOW DEGREE TAPER, 3.25 INCH 3.62 INCH CONE, GSP BALANCER LOW DEGREE TAPER, 3.50 INCH 4.31 INCH WINSI SOFTWARE .060 RAD INSERT ASSEMBLY TOOL CHARGER AC CONVERSION KIT PLUG IN STUD III-90 MM WITH ROUND HEAD, FITS FLANGE PLATES PLUG IN STUD IV - 100MM WITH TAPERED HEAD, FITS FLANGE PLATE 6.0 INCH CUP PIN END KIT FLANGE PLATES, FIXED WBC AND STUDS KIT TROLLEY STORAGE FOR FLANGE PLACE, FIXED WBC AND STUD KIT REPAIR KIT FOR PROGRIP QUICK CLAMP 76-438-2 PREFERRED - STANDARD TAPER CONE & FLANGE PLATE MOUNTING KIT PERFERRED - LOW TAPER CONE & FLANGE PLATE MOUNTING KIT PRECISION - DIRECT FIT COLLET & FLANGE PLATE MOUNTING KIT INKJET COLOR PRINTER AND SIDE STORAGE SUPPORT KIT (GSP9200 ONLY) INKJET COLOR PRINTER AND REAR COLUMN STORAGE SUPPORT KIT (GSP9200 ONLY) PREFERRED - STANDARD TAPER CONE & FLANGE PLATE MOUNTING KIT PERFERRED - LOW TAPER CONE & FLANGE PLATE MOUNTING KIT PRECISION - DIRECT FIT COLLET & FLANGE PLATE MOUNTING KIT TC3500 HIGH PERFORMANCE KIT WING NUT, FORGED WITHOUT HANDLES WING NUT, FORGED WITH HANDLES PROTECTOR SLEEVE 6.0 INCH, SCRATCH GUARD FOR 175392-1 PLUG IN STUD II-80 MM WITH TAPERED HEAD, FITS FLANGE PLATE BL505DC-AB BL505C-AB DUST CONTAINMENT SYSTEM LIFT OIL PAN KIT ADAPTER 10 X 7.25 ADAPTER 10 X 11.25, OCL ACCESSORY 1-4 1-4 15-6
16-12
1-800-ROTUNDA
Item # 006-03193 006-03194 006-03195 006-03197 006-03198 006-03199 006-03200 006-03201 006-03202 006-03203 006-03204 006-03205 006-03206 006-03207 006-03208 006-03209 006-03210 006-03211 006-03212 006-03213 006-03214 006-03215 006-03216 006-03217 006-03218 006-03219 006-03220 006-03221 006-03222 006-03224 006-03225 006-03226 006-03227 006-03229 006-03231 006-03232 006-03233 006-03265 006-03266 Model # RP9-9032.3218 175-360-2 175-361-2 20-2166-1 PA131 PA121 WA223 WA224 WA233 WA243 WA244 WA245 HS401FC HS401LC HS400FC HS400LC HS401WM HS401PS HS401PD HS401FM HS401DT HS401CM HS400WM HS400PS HS400PD HS400FM HS400DT 20-2184-1 WA234 RX12L-IS RX12XL-IS TCX643HD RP11-2306040 TCX621HD RP11-9443938 RP11-2016581 20-2167-1 RP11-8-11400070 RP11-8-11400153 Description BELL FLANGE 6 FOUR SLOT ADAPTER FIVE SLOT OCL ADAPTER TDC LASER SYSTEM KIT
www.fordrotunda.com
Page #
PROALIGN COMPACT BASIC CABINET W/17 INCH DISPLAY PROALIGN WALL MOUNT CABINET W/17 INCH DISPLAY WINALIGN WALL MOUNT CABINET W/20 INCH WIDESCREEN LCD FLAT PANEL DISPLAY WINALIGN WALL MOUNT CABINET W/26 INCH WIDESCREEN LCD FLAT PANEL DISPLAY WINALIGN COMPACT PLUS CABINET W/20 INCH WIDESCREEN LCD FLAT PANEL DISPLAY WINALIGN PREMIUM PLUS CABINET W/20 INCH WIDESCREEN LCD FLAT PANEL DISPLAY WINALIGN PREMIUM PLUS CABINET W/26 INCH WIDESCREEN LCD FLAT PANEL DISPLAY WINALIGN PREMIUM PLUS CABINET W/32 INCH WIDESCREEN LCD FLAT PANEL DISPLAY HAWKEYE WINALIGN SENSORS FIXED COLUMN HAWKEYE WINALIGN SENSORS LIFT COLUMN HAWKEYE PROALIGN SENSORS FIXED COLUMN HAWKEYE PROALIGN SENSORS LIFT COLUMN HAWKEYE WINALIGN SENSORS WALL MOUNT STRAIGHT HAWKEYE WINALIGN SENSORS PIT MOUNT SINGLE HAWKEYE WINALIGN SENSORS PIT MOUNT DOUBLE HAWKEYE WINALIGN SENSORS FLOOR MOUNT WIDE HAWKEYE WINALIGN SENSORS DRIVE THROUGH HAWKEYE WINALIGN SENSORS CABINET MOUNT HAWKEYE PROALIGN SENSORS WALL MOUNT STRAIGHT HAWKEYE PROALIGN SENSORS PIT MOUNT SINGLE HAWKEYE PROALIGN SENSORS PIT MOUNT DOUBLE HAWKEYE PROALIGN SENSORS FLOOR MOUNT WIDE HAWKEYE PROALIGN SENSORS DRIVE THROUGH WALL MOUNT EXTENSION KIT WINALIGN COMPACT PLUS CABINET W/26 RX SCISSOR RACK - 12000LB. RX SCISSOR RACK - LONG DECK - 12000LB HEAVY DUTY TIRE CHANGER RT TRUCK ROLLER FOR 640 TCX620HD COMPACT SINGLE PHASE TIRE CHANGER GVA/R QUICK CLAMP 620 BBR TRUCK ROLLER FOR 620 STRAIGHTTRAK RETROFIT KIT (GSP9720) DROP CENTER CLAMP LUBE ROLLER-BEAD PUSHER (TCX550BPS) 15-3 15-3 15-13 15-13
16-13
1-800-ROTUNDA
Item # 006-03267 006-03268 006-03269 006-03270 006-03272 006-03273 006-03274 006-03275 006-03276 006-03277 006-03278 006-03279 006-03280 006-03281 006-03282 006-03283 006-03284 006-03285 006-03286 006-03287 006-03288 006-03289 006-03290 006-03291 006-03293 006-03294 006-03295 006-03298 006-03299 006-03300 006-03301 006-03302 006-03303 Model # RP11-8-11400162 20-2201-1 TC3510E 20-2172-1 20-2169-1 20-2173-1 20-2189-1 20-1471-1 175-377-1 20-2126-C19P-1 20-2126-C19R-1 20-2126-C19S-1 20-2126-CP-1 20-2126-CR-1 20-2126-CS-1 20-2126-P-1 20-2126-R-1 20-2126-S1 WT223 WT233 WT234 WT243 WT244 WT245 TC3510A TC3510AW TC3510EW TC3710E TC3710EW WA141 WA142 WA131 WA132 Description
www.fordrotunda.com
Page # 15-1
6IN EXTENSION JAWS AND BPS ROLLERS UPGRADE WHEEL LIFT FOR TC3510 SERIES TIRE CHANGERS TC3510E ELECTRIC MOTOR TIRE CHANGER Bead Press Arm Kit, TCX500 with S/N IDA000559 or higher Stage 2 RX Approach Ramps 40 long extended approach ramps for RX models ALIGNLIGHT KIT Stage 2 RX Approach Ramps 50 long extended approach ramps for RX models. TURNPLATE BRIDGES FOR USE W/DSP400 & DSP600 (PAIR) HD-SELF CENTERING WHEEL ADAPTOR HD-P211/P411 TO 811P PLUS UPGRADE W/COLOR PRINTER & 19" UVGA HD-R611 TO 811P PLUS UPGRADE W/COLOR PRINTER & 19" UVGA HD-S411/S611 TO 811P-PLUS UPGRADE W/COLOR PRINTER AND 19" UVGA HD-P211/P411 UPGRADE W/COLOR PRINTER HD-R611 TO 811P-PLUS UPGRADE KIT W.COLOR PRINTER HD-S411/S611 TO 811P-PLUS UPGRADE W/COLOR PRINTER HD-P211/P411 TO 811P-PLUS UPGRADE HD-R611 TO 811P-PLUS UPGRADE HD-S411/S611 TO 811P-PLUS UPGRADE HD-ALIGNER W/COLUMN OR WALL MNT CAB & 20" LCD WIDE SCREEN HD-ALIGNER W/PREMIUM COMPACT CAB & 20" LCD WIDE SCREEN HD-ALIGNER W/PREMIUM COMPACT CAB & 26" LCD WIDE SCREEN HD-ALIGNER W/PREMIUM LARGE CAB & 20" LCD WIDE SCREEN HD-ALIGNER W/PREMIUM LARGE CAB & 26" LCD WIDE SCREEN HD-ALIGNER W/PREMIUM LARGE CAB & 32" LCD WIDE SCREEN TC3500 AIR MOTOR TIRE CHANGER TC3500 AIR MOTOR TIRE CHANGER W/ WHEEL LIFT TC3500 ELECTRIC MOTOR TIRE CHANGER W/ WHEEL LIFT HIGH CAPABILITY TIRE CHANGER HIGH CAPABILITY TIRE CHANGER W/ WHEEL LIFT ALIGNER W/ LARGE CABINET-17IN LCD FLAT PANEL ALIGNER W/ LARGE CABINET-19IN LCD FLAT PANEL ALIGNER W/ COMPACT CABINET-17IN LCD FLAT PANEL ALIGNER W/ COMPACT CABINET-19IN LCD FLAT PANEL 15-1 15-1 15-13 15-13 15-13
16-14
1-800-ROTUNDA
Item # 006-03304 006-03305 006-03306 006-03307 006-03308 006-03309 006-03310 006-03311 006-03312 006-03313 006-03314 006-03315 006-03316 006-03317 006-03318 006-03319 006-03320 006-03321 006-03322 006-03323 006-03324 006-03325 006-03326 006-03327 006-03328 006-03329 006-03330 006-03334 006-03335 006-03336 006-03340 006-03341 006-03342 Model # WA122 TC3510AHP TC3510EHP 20-1751-C19LP-1 20-1751-C19LS-1 20-1751-C19LR-1 20-1752-C20LP-1 20-1752-C20LS-1 20-1752-C20LR-1 20-2211-1 20-2222-1 20-2223-1 20-2243-1 192-156-2 192-157-2 192-158-2 192-174-2 20-1724-1 RP11-5-400900 WT122 WT131 WT132 WT141 WT142 RX9L-IS-P RX12L-IS-P RX12XL-IS-P RP6-G1000A23 RP6-G1000A7 RP6-G1000A8 RP6-G1000A36 RP6-G1000A44 RP6-G1000A52 Description
www.fordrotunda.com
Page #
ALIGNER W/ COLUMN/WALL MOUNTED CABINET-19IN LCD FLAT PANEL TC3500 HIGH PERFORMANCE AIR TC TC3500 HIGH PERFORMANCE ELECTRIC TC P211/P411 TO WA100 UPGRADE KIT W/ COLOR PRINTER AND 19IN LCD FLAT PANEL DISPLAY. S411/S611 TO WA100 UPGRADE KIT W/COLOR PRINTER AND 19IN LCD FLAT PANEL DISPLAY. R611 TO WA100 UPGRADE KIT W/COLOR PRINTER AND 19IN LCD FLAT PANEL DISPLAY. P211/P411 TO WA200 UPGRADE KIT W/ COLOR PRINTER AND 20IN LCD WIDESCREEN. S411/S611 TO WA200 UPGRADE KIT W/COLOR PRINTER AND 20IN LCD WIDESCREEN. R611 TO WA200 UPGRADE KIT W/COLOR PRINTER AND 20IN LCD WIDESCREEN. 1 GB MEMORY UPGRADE KIT 512 MB MEMORY UPGRADE KIT 1 GB MEMORY UPGRADE KIT FOR BEIGE 811 UNITS FORD DR COLLET KIT CONE-CTN, 2.4-2.55, 2.48-2.63 CONE-CTN, 2.55-2.70, 2.63-2.78 CONE-CTN, 2.70-2.85, 2.78-2.93 CONE-CTN, 4.8-4.95, 4.88-5.03 256 MB MEMORY UPGRADE KIT BEAD ROLLER PRESS HD ALIGNER W/ COLUMN/WALL MOUNTED CABINET AND 19IN LCD FLAT PANEL HD ALIGNER W/ COMPACT CABINET AND 17IN LCD FLAT PANEL HD ALIGNER W/ COMPACT CABINET AND 19IN LCD FLAT PANEL HD ALIGNER W/ LARGE CABINET AND 17IN LCD FLAT PANEL HD ALIGNER W/ LARGE CABINET AND 19IN LCD FLAT PANEL RX SCISSOR RACK-9000LB/FLUSH MOUNT/INFLATION STATION/POWERSLIDE SLIPPLATES. RX SCISSOR RACK-12000LB/FLUSH MOUNT/INFLATION STATION/POWERSLIDE SLIPPLATES. RX SCISSOR RACK-12000LB/FLUSH MOUNT/INFLATION STATION/POWERSLIDE SLIPPLATES/LONG DECK. FORCE MULTIPLIER (TC3500/3250/2000) MECHANICAL BEAD ROLLER(TC3250) MOUNTING BELT KIT - (TC3500/3250) BEAD DEPRESSOR TAIL EXTENSION LT CENTER SUPPORT FLANGE BEAD LEVER
16-15
1-800-ROTUNDA
Item # 006-03344 006-03345 006-03346 006-03347 006-03348 006-03349 006-03352 006-03353 006-03354 006-03355 006-03356 006-03357 006-03358 006-03359 006-03360 006-03361 006-03362 006-03365 006-03366 006-03367 006-03368 006-03369 006-03370 006-03371 006-03372 006-03373 006-03374 006-03375 006-03376 006-03377 006-03378 006-03379 006-03380 006-03382 006-03383 006-03384 006-03385 006-03386 006-03392 006-03393 006-03394 006-03395 006-03396 Model # RP6-G1000A67 TCA34 TCA34W 20-2236-1 RP6-G1000A87 RP6-G1000A94 20-2198-3 20-2199-1 HS401FCN HS401WMN HS401FMN HS401LCN 20-2254-1 20-2205-1 20-2206-1 20-2208-1 20-2209-1 WA141DRE WA142DRE WA243DRE WA244DRE WA245DRE 133-81-2 20-1830-C19LP-1 20-1830-C19LR-1 20-1830-C19LS-1 20-2126-C20LP-1 20-2126-C20LR-1 20-2126-C20LS-1 20-2259-1 20-2268-1 RP11-8-11400087 RP11-8-11400187 RP6-710013421 RP6-710090480 RP6-G1000A11 RP6-G1000A73 RP6-G1000A91K 20-2274-2 20-2275-2 20-2288-1 20-2286-2 WA122DRE Description
www.fordrotunda.com
Page # 15-2 15-2 15-2 15-1, 15-2
BEAD DEPRESSOR TAIL WITH TRACTION, 28IN AUTO34 TIRE CHANGER AND BEAD PUSHER AUTO34 TIRE CHANGER WITH WHEEL LIFT AND MIRROR WHEEL LIFT FOR AUTO34 FLANGE PLATES CONTOURED PRESS HEAD ALIGNMENT TOO KIT DRAWER ORGANIZER KIT HS401FC NARROW BAY SENSORS W/FIXED CAMERAS HS401WM NARROW BAY SENSORS WALL MOUNTED HS401FM NARROW BAY SENSORS W/FLOOR MOUNTED OVERHEAD CAMERAS HS401LC NARROW BAY SENSORS W/VERTICAL CAMERA LIFT HAWKEYE NARROW BAY KIT STD. TAPER CONE KIT/FIXED FLANGE PLATES & ACCYS. W/O TROLLEY LOW TAPER CONE KIT/FIXED FLANGE PLATES W/O TROLLEY STD. TAPER CONE KIT/ADJ. FLANGE PLATE W/O TROLLEY LOW TAPER CONE KIT/ADJ FLANGE PLATE W/O TROLLEY Aligner-large cabinet-17 LCD Flat Panel-PTS Aligner-large cabinet-19 LCD Flat Panel-PTS PREMIUM PLUS CABINET W/20" WS-LCD-PTS PREMIUM PLUS CABINET W/26" WS-LCD-PTS PREMIUM PLUS CABINET W/32" WS-LCD-PTS HD - AC Jack Tray for RKHD 24 P211/P411 to WT100 Upgrade Kit R611 to WT100 Upgrade Kit S411/S611 to WT100 Upgrade Kit P211/P411 to WinAlign WT200 Upgrade Kit w/color printer R611 to WinAlign WT200 Upgrade Kit w/color printer and 20 S411/S611 to WinAlign WT200 Upgrade Kit w/color printer an HD - Roller Guide Kit Kit-PAX for TC3700 Mount/Demount Head (Polymer) complete with metal adaptor b Storage Tray for TCX500 Rubber Protection Plate (TC3700 and TCA34) Drive Pin Protectors (TCA34 and TC3700) Half Moon Bead Lever PAX kit for Auto34 Kit-2 Mount Head 40 RimSled Heavy Duty and Bus, 8-10 Lug Balancer Adapter Commercial Truck and Van, 8-10 Lug Balancer Adapter HammerHead TDC Laser, Field Retrot Kit for GSP Balancers Stand , HD adaptor tree. Standard with HD balancer Aligner-w/column wall mounted cab.-19 LCD Flat Panel-PTS 15-6 15-6
16-16
1-800-ROTUNDA
Item # 006-03397 006-03398 006-03399 006-03400 006-03401 006-03402 006-03405 006-03406 006-03407 006-03408 006-03409 006-03410 006-03411 006-03412 006-03413 006-03414 006-03415 006-03416 006-03417 006-03418 006-03419 006-03421 006-03422 006-03423 006-03424 006-03425 006-03426 006-03427 006-03428 006-03429 006-03430 006-03431 006-03432 006-03433 006-03434 006-03435 006-03436 006-03437 006-03438 006-03439 006-03440 006-03441 006-03442 Model # WA132DRE WA131DRE WA223DRE WA224DRE WA233DRE WA234DRE WT223DRE WT233DRE WT234DRE WT243DRE WT244DRE WT245DRE WT122DRE WT131DRE WT132DRE WT141DRE WT142DRE PRONTO PRONTO-II 20-2313-1 WI132 SS104P 20-2195-1 L441 L441-43 L441-PS L441-IS L444 L444-43 L444-PS L444-IS 20-2377-1 20-2340-1 HS401ML 20-2150-1 20-2151-1 20-2321-1 20-2320-1 TCX505A TCX505E TCX515A TCX515E TCX535A Description
www.fordrotunda.com
Page #
Aligner-w/compact cabinet-19 LCD Flat Panel-PTS Aligner-w/compact cabinet-17 LCD Flat Panel-PTS Aligner-w/column wall mtd cab.-20 Widescreen LCD Flat-PTS Aligner-w/column wall mtd cab.-26 Widescreen LCD Flat-PTS Aligner-w/Premium compact cab.-20" Widescreen LCD Flat-PTS Aligner-w/Premium compact cab.-26" Widescreen LCD Flat-PTS HD Align w/column/wall mount cab & 20in Widescreen LCD-PTS HD Align w/prem compact cab & 20 Widescreen LCD-PTS HD Align w/prem compact cab & 26 Widescreen LCD-PTS HD Align w/prem large cab & 20 Widescreen LCD-PTS HD Align w/prem large cab & 26 Widescreen LCD-PTS HD Align w/prem large cab & 32 Widescreen LCD-PTS HD Align w/column/wall mounted cab & 19 LCD-PTS HD Align w/compact cab & 17 LCD Flat-PTS HD Align w/compact cab & 19 LCD-PTS HD Align w/large cab & 17 LCD-PTS HD Align w/large cab & 19 LCD-PTS Aligner w/col mnt cab 17 at panelstd hex targetscol p Aligner w/mob cab 17 at panelstd hex targetscol prntr Alternative Mounting Base for Hunter Engineering Pronto or PA121 Consl Inspection Console w/compact cabbroch pockets19 LCD Sideslip Meter - Flush Wireless Network Kit - for Hunter Engineering WinAlign WA Aligner sys. 4-PostOpen Front 18K Cap177 2-whl align WB 3HP 4-Post 18k- Same as L441 plus (2) 133-83-1 Swing Jacks 4-Post 18k- Same as L441-43 plus PowerSlide slip plates 4-Post 18KSame as L441-PS plus InatnStation/FIA console 4-Post Closed Front 18k Cap211 2-whl align WB 3HP m 4-Post 18k- Same as L444 plus (2) 133-83-1 Swing Jacks 4-Post 18k- Same as L444-43 plus PowerSlide slip plates 4-Post 18 Same as L444-PS plus InatnStation/FIA console AlignlightsRack lighting kit for L441 & L444 model 4-Post Ination Station/FIA Console Add-on console to add FIA Sensors - Man. operated vertical camera lift w/full travel CodeLink with XF2 POD Data link from WinAlign to the veh CodeLink without XF2 POD Data link from WinAlign to the HS401CM to Stand Alone Mount Conversion Kit (Black) HS401CM to Stand Alone Mount Conversion Kit (Red) TCX505A Enhanced Rim Clamp Tire Changer/Air TCX505E Enhanced Rim Clamp Tire Changer/Electric TCX515A Enhanced Rim Clamp Tire Changer/Air W/Bead Press TCX515E Enhanced Rim Clamp Tire Changer/Electric W/B-Press TCX535A Enhanced Rim Clamp Tire Changer/Air W/Bead Press 15-3 15-3 15-3 15-3 15-3 15-12 15-12 15-12 15-12 15-12 15-12 15-12 15-12 15-12
16-17
1-800-ROTUNDA
Item # 006-03442 006-03443 006-03445 006-03446 006-03447 006-03448 006-03449 006-03450 006-03451 006-03452 006-03453 006-03454 006-03455 006-03456 006-03457 006-03458 006-03459 006-03460 006-03461 006-03462 006-03463 006-03464 006-03465 006-03466 006-03467 006-03468 006-03469 006-03470 006-03471 006-03472 006-03473 006-03474 006-03475 006-03476 006-03477 006-03478 006-03479 006-03480 006-03481 006-03482 006-03483 Model # TCX535A TCX535E DS00 FM00 FM01 FM02 FM03 QM00 QM01 QM02 QM03 QM10 QM11 QM12 QM13 RF00 RF01 RF02 RF03 RF10 RF11 RF12 RF13 RF20 RF21 RF22 RF23 RF30 RF31 RF32 RF33 SW00 SW01 SW02 SW03 SW10 SW11 SW12 SW13 SW20 SW21 Description
www.fordrotunda.com
Page # 15-3
Enhanced Rim Clamp Tire Changer - Air, W/Bead Press Enhanced Rim Clamp Tire Changer - Electric, W/Bead Press DSP7700 LED Wheel Balancer ForceMatch HD Wheel Balancer W/ Wheel Lift ForceMatch HD Whl Balancer W/Wheel Lift Printr&Storage ForceMatch HD Wheel Balancer W/Wheel Lift & TDC Laser ForceMatch HD Whl Balancer W/TDC LaserLiftPrinter&Stor. QuickMatch LCD Wheel Balancer QuickMatch LCD Wheel Balancer W/Ink Jet Printer&Storage QuickMatch LCD Wheel Balancer W/TDC Laser QuickMatch LCD Wheel Balancer W/TDC Laser Printer&Storage QuickMatch LCD Wheel Balancer W/Wheel Lift QuickMatch LCD Wheel Balancer W/Wheel Lift Printer&Stor QuickMatch LCD Wheel Balancer W/Wheel Lift TDC Laser QuickMatch LCD Wheel Balancer W/TDC Laser Lift Printer Road Force GSP9700 LCD Balancer Road Force GSP9700 LCD Balancer W/Printer & Side Storage Road Force GSP9700 LCD Balancer W/TDC Laser Road Force GSP9700 LCD Balancer W/TDC Laser Printer&Stor Road Force GSP9700 LCD Balancer W/Wheel Lift Road Force GSP9700 LCD Balancer W/Wheel LiftPrinter&Stor Road Force GSP9700 LCD Balancer W/TDC Laser Wheel Lift Road Force GSP9700 LCD Balancer W/TDC LaserLiftPrinter Road Force GSP9700 LCD Balancer W/AutoClamp Road Force GSP9700 LCD Balancer W/ AutoClampPrinter&Stor. Road Force GSP9700 LCD Balancer W/AutoClamp TDC Laser Road Force GSP9700 LCD Balancer W/A-ClampTDC LaserPrntr Road Force GSP9700 LCD Balancer W/Wheel Lift AutoClamp Road Force GSP9700 LCD Balancer W/Whl Lift A-ClampPrntr Road Force GSP9700 LCD Balancer W/TDCWhl Lift AutoClamp Road Force GSP9700 LCD Balancer W/TDCLift A-ClampPrntr SmartWeight LCD Wheel Balancer SmartWeight LCD Wheel Balancer W/Printer & Side Storage SmartWeight LCD Wheel Balancer W/TDC Laser SmartWeight LCD Wheel Balancer W/TDC LaserPrinter&Stor. SmartWeight LCD Wheel Balancer W/Wheel Lift SmartWeight LCD Wheel Balancer W/Wheel LiftPrinter&Stor. SmartWeight LCD Wheel Balancer W/Wheel Lift TDC Laser SmartWeight LCD Wheel Balancer W/TDCWheel Lift Printer SmartWeight LCD Wheel Balancer W/AutoClamp System SmartWeight LCD Wheel Balancer W/AutoClamp Printer&Stor. 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6 15-6
16-18
1-800-ROTUNDA
Item # 006-03484 006-03485 006-03486 006-03487 006-03488 006-03489 006-03490 006-03491 006-03492 006-03493 006-03494 006-03495 006-03496 006-03497 006-03498 006-03499 006-03500 006-03501 006-03502 006-03503 006-03504 006-03505 006-03506 006-03507 006-03508 006-03509 006-03510 006-03511 006-03512 006-03513 006-03514 006-03515 006-03516 006-03523 006-03524 006-03525 006-03526 006-03527 006-03528 006-03529 006-03530 006-03531 006-03532 006-03533 006-03534 Model # SW22 SW23 SW30 SW31 SW32 SW33 106-127-2 175-325-1 192-176-2 20-1741-1 RP6-G1000A56 20-2387-1 20-2386-1 20-2388-1 20-2307-1 20-1680-1 72-373-1 TCX575 TCX575W P441-IS P441J P444-IS P444J PT131 TCX535AW TCX535EW 20-2322-1 20-2375-1 20-2033-1 20-1841-1 20-2490-1 20-2491-1 20-2479-1 20-2177-1 WA15-S 28-75-1 192-172-2 192-173-2 20-1274-2 PRESTO PRONTO-III DSP706 DSP708 20-2395-1 20-2396-1 Description
www.fordrotunda.com
Page # 15-6 15-6 15-6 15-6 15-6 15-6
SmartWeight LCD Wheel Balancer W/AutoClamp TDC Laser SmartWeight LCD Wheel Balancer W/AutoClamp TDCPrinter SmartWeight LCD Wheel Balancer W/Wheel Lift AutoClamp SmartWeight LCD Wheel Balancer W/Whl Lift AutoClampPrnt SmartWeight LCD Wheel Balancer W/Whl Lift AutoClamp TDC SmartWeight LCD Wheel Balancer W/Lift A-ClampTDC Prntr Protector Sleeve (9.0) Scratch Guard 10-12 DSP600/400 ADAPTOR Direct Fit Collet Aftermarket 8-Lug Wheels light Truck Drive Thru Kit for Hunter RX-12 Lift BEAD TAIL ACCESSORY - Hunter Table Top Tire Changers Pref-Low Taper Cone & Adjustible Flange Plate Mtg Kit Prec -Direct Fit Collet & ADJUSTABLE FLANGE PLATE Mtg Kit Prec - Direct-Fit Collet & FIXED FLANGE PLATE Mounting Kit Turnplate Bridge Kit (2) Drive-Thru Kit For RX-9 Model Scissor Lift Certied DSP600 Calibration Bar Tire Changer Leverless Table-Top Auto-Swing Arm Tire ChangerLeverlessTable-TopAuto-Swing ArmWhl Lift 'Pit Rack 18000 lbs CapacityInation Station/FIA conso Pit Rack 18000 lbs Capacity 177 2-wheel align WB Pit Rack 18000 lbs Capacity Ination Station/FIA c Pit Rack 18000 lbs Capacity 211 2-wheel align WB HD Aligner with Mobile Cabinet 17 LCD Flat Panel Display Enhanced Rim Clamp Tire Changer - Air, W/B-Press & Whl Lift Enhanced Rim Clamp Tire Changer-Elec.,W/B-Press & Whl Lift Front Cone Support Kit for Hunter GenIII Balancers HawkEye Sensor Dual Purpose Adaptor Mount Extra Long Drive-On Ramp Extension Kit for L441 & L444 Adaptor-Upgrade Kit Kit-WinAlign/RAM/CodeLink Upgrade Kit-WinAlign/CodeLink Upgrade CM Mounting Kit for Compact Cabinets Premium PC Upgrade Kit 811 Console to WA2000 BRAKE PEDAL DEPRESSOR STEERING WHEEL HOLDER COLLET DIRECT FIT TWO SIDED LOW TAPER (4.500 - 4.725) COLLET DIRECT FIT TWO SIDED LOW TAPER (4.650 - 4.875) Three jaw Chuck Kit PRESTO Align.Sys. w/compact mobile cab 17 LCD & Sensors PRONTOIII Align.Sys.w/mobile cab 17 LCDDigital Sensors DSP7064 Cordless Optical Sensors2 w/toe arms& Self-Ctrg DSP708-4 Cordless Sensorsall w/Toe Arms & Self-Ctrg Whl A 50mm Filler Plate Kit 1.5 Filler Plate Kit
15-13
15-6 15-6
15-1 15-1
15-3 15-3
15-12
16-19
1-800-ROTUNDA
Item # 006-03535 006-03536 006-03537 006-03538 006-03539 006-03540 006-03541 006-03542 006-03543 006-03544 006-03545 006-03546 006-03547 006-03548 006-03549 006-03550 006-03551 006-03552 006-03553 006-03554 006-03555 006-03556 006-03557 006-03558 006-03559 006-03560 006-03561 006-03562 006-03563 006-03564 006-03565 006-03566 006-03568 006-03569 006-03570 006-03571 006-03572 006-03573 006-03574 006-03575 006-03576 006-03577 006-03578 Model # 22-442-2 TC3715E TC3715EW 20-2502-1 RX10 RX10F RX10J RX10JF RX10-PS RX10F-PS RX10-IS RX10F-IS RX10L RX10LF RX10LJ RX10LJF RX10L-PS RX10LF-PS RX10L-IS RX10LF-IS TCX535EL TCX535ELW HS200ML HS200CM TCA28 TCA28W 20-2531-1 20-2532-1 20-2533-1 DS05 20-2517-1 20-2341-1 20-2176-1 WA445DRE WA444DRE WA443DRE WA434DRE WA433DRE WA424DRE 20-2563-1 20-2564-1 WA423DRE HE421WM Description Rubber Wheel Chocks (2)
www.fordrotunda.com
Page # 15-1 15-1 15-13 15-13 15-13 15-13 15-13 15-13 15-13 15-13
TC3700 Elec Tire Changer with Bead Press Arm TC3700 Elec Tire Changer with Bead Press Arm & Wheel Lift TC Series Bead Press Arm RX10 Scissor Rack 10000# Cap. w/Air line kit. 162 max RX10 Scissor Rack Flush Mount w/Air line kit 162 max RX10 Scissor Rack w/(2)6000lb Swing Jacks & Air line kit RX10 Scissor RackFlush Mount2 Swing JacksAir Line Kit RX10 Scissor RackPwr Turnplates(2)6K Jacks Air Line Kit RX10 Scissor Rack Flush MntPwr Trnplts(2)6K JcksAirK RX10 Scissor Rack Inf-StationPwr Trnplts6K Jacks RX10 Scissor RackFlush MntInf-StatPwr Trnplts6K Jacks RX10 Scissor Rack Long Deck Air Line Kit Included RX10 Scissor Rack Long Deck Flush Mount Air Line Kit RX10 Scissor Rack Long Deck(2)6K Swing JacksAir LineKit RX10 Scissor RackLong DeckFlsh Mnt6K JacksAir Line Kit RX10 Scissor RackLong DeckPwrSlde Trnplts6K JacksAirK RX10 Scissor RackLong DeckFlshMntPwrTrnplts6KJksAirK RX10 Scissor Rack Long DeckInf-StationPwrTrnplts6KJks RX10 Scissor RackL-DeckFlshMntInfStatPwrTrnplts6KJks TCX535EL Tabletop Tire Changer-Electric w/Bead Press Sys. TCX535ELW Tabletop Tire Chngr-Elec wWhl Lift &Bead Prs Sys HS200 Sensors-Floor Mounted Column Man. Oper. Vert.Camera HS200 SensorsPortable Cabinet Mount Sensors for PA131 AUTO 28 Tire Changer - Leverless Center Clamp AUTO 28 TIRE CHANGER W/WHEEL LIFT-Leverless Center Clamp 14 Convertible Alignment Turnplate Kit 14 Convertable Alignment Turnplate Kit - STAINLESS STEEL 14 Low Friction Convertable Alignment Turnplate Kit - SS DSP7705 Hunter Wheel Balancer Wheel Lift for Hunter Auto28 Wheel Balancer 19.5 Wheel Adapter for Auto28 Auto34 & TC3700 Changers Hunter 811 Alignment Console Upgrade to WA100 PC hardware WA445DRE Aligner PTS w/prem lrg cabnt 32 Widescreen LCD WA444 DRE Aligner PTS w/prem lrg cabnt 26 widescreen LCD WA443DRE Aligner PTS w/prem lg cabnt 22 touch screen LCD WA434 DRE Aligner PTS w/prem comp cab 26 widescreen LCD WA433DRE Aligner w/prem comp cab 22 touch screen LCD dis WA424DRE Aligner w/column wall mnt cabnt 26Widescreen 20-2563-1 Protective Ring Replacement Kit for QuickGrip Wh 20-2564-1 Protective Ring Replacement Kit for QuickGrip Wh WA423DRE Aligner w/columnwall mnt cabnt 22 touch screen HE421WM HawkEye Alignment Sensors -Wall Mounted
15-2 15-2
15-2 15-2 15-10, 15-11 15-11 15-11 15-11 15-11 15-11 15-11
16-20
1-800-ROTUNDA
Item # 006-03579 006-03580 006-03581 006-03582 006-03583 006-03584 006-03585 006-03586 006-03587 006-03588 006-03589 006-03590 006-03613 006-03614 006-03615 006-03616 007 HICKOK Item # 007-03657 007-03658 007-03659 007-03696 007-03697 007-03698 007-03699 007-03700 011 KABA-ILCO Item # 011-00002 011-00005 011-00156 011-00173 011-00174 011-00175 011-00199 011-00200 011-00214 011-00218 011-00226 011-00242 011-00243 011-00244 011-00246 011-00247 011-00248 Model # MK1-FO-AE-84 1/2 MK1-RAM-AE MK1-FD-TR-AE MK1-GM-AE MK1-CH-AE MK1-CH-AE-89 MK1-FO-FM-AE P27-P26 MK1-MTV-AE MK1-ASP-AE MK1-PATS-AE SK-400 SK-114 SK-103 P10-BX SK-244 SK-402 Description 10 CODE UPDATE KIT CARGO RAM KIT-003 TRACER/FESTIVA KIT 003 GM KEY CODE CUT-UPDATE Model # FPT26-21 FPT2600-EX1 FPT27-EX1 61867R 45967 20964 20901 20902 Description PASS/FAIL CALIBRATION TOOL I/M HAND HELD FUEL CAP TESTER I/M ELEC FUEL CAP TEST SYST Model # HE421ML HE421FM HE421FC HE421CM4 HE421CM4BLK HE421CM3 HE421CM3BLK HE421LC 20-2521-1 20-2528-1 20-2577-1 20-2552-1 46-653-2 TC3300 TC3305 TC3315 Description
www.fordrotunda.com
Page # 15-11 15-10 15-11 15-11 15-11
HE421ML HawkEye Alignment Sensors Manual Camera Lift HE421FM HawkEye Alignment Sensors Floor Mounted HE421FC HawkEye Alignment Sensors Fixed Camera HE421CM4 HawkEye Alignment Sensors Portable Cabinet Mount HE421CM4BLK HawkEye Sensors Portable Cabinet Mount-black HE421CM3 HawkEye Alignment Sensors Portable Cabinet Mount HE421CM3BLK HawkEye Sensors Portable Cab Mount black HE421LC HawkEye Alignment Sensors Vertical Camera Lift 20-2521-1 Adjustable Tire Hooks 20-2528-1 QuickGrip Storage Brackets 20-2577-1 TD Target to SCA Adaptor Kit 20-2552-1 Roll Around Storage CartsFor storing QuickGrip Light Truck Wheel Mounting Spacer TC3300 Tire Changer Center Clamping Single-Speed 220V TC3305 Tire Changer with Plus Devise Center Clamping TC3315 Tire Changer with Bead Press Arm Center Clamping
Page #
Cooling System Pressure Test and Vacuum Rell Kit Ford Fuel Cap Pressure Test System Tire Pressure Documentation Kit (TPDK) Additional Digital Tire Pressure Gauge (2Pk) for 007-03698 Thermal label printer w/power supply for TPDK Model 20964 Page #
CHRYSLER KEY CODE CUT/UPDATE 89 CHRYSLER 2-S CODE KIT NEW MERKUR EXACTA KIT 88 CARRYING CASE 93 PROBE EXACTA KIT EXACTA ASPIRE ACCESSORY KIT 8 BIT CODE CUTTER ACCESSORY KT SPACING KEY-8 CUT KEYS SPACING KEY-10 CUT KEYS SPACING KEY-5 CUT KEYS DEPTH KNOB FOR 5 CUT KEYS SPACING KEY CHRYSLER KEYS 92-97 SPACING KEY FOR CHRYSLER KEYS 98
16-21
1-800-ROTUNDA
Item # 011-00249 011-00250 011-00251 011-00252 011-00253 011-00254 011-00255 011-00256 011-00257 011-00258 011-00259 011-00260 011-00261 011-00263 011-00264 011-00265 011-00266 011-00267 011-00268 011-00269 011-00270 011-00272 011-00273 011-00274 011-00276 011-00277 011-00278 011-00279 011-00281 011-00282 011-00283 014 OTC/SPX Item # 014-00001 014-00073 014-00761 014-00792 014-00931 014-00934 014-00935 014-00938 014-01527 014-01537 014-01538 Model # 538578 PS94-807-20BR NU2988A D94P-6001-A PS92-810-7C/96/9 PS92-800-29E/30B PS92-800-72 52075/49235SPEC 1824A 014-01537 014-01538 Description ADJUSTABLE GRIP ARM, 1735A MODULAR ENGINE LIFT BRACKET DIESEL ENGINE PRESSURE TEST KIT 3.8L ENGINE BRACKET SET DIESEL ENGINE TEST ADAPTER Model # SK-245 P10-AM P10-N SK-100 P10-A 029-CHY1 029-FORD 029-GM-1 029-HO-1 029-MAZ1 029-MIT1 029-NIS1 029-TOY1 029A ULTRACODE MK1-MPV-AE MK1-FO-TR-AE MK1-FO-AE-96 MK1-FO-AE 029A-MAZ1 MKI DELTAFO D708005ZB D913645ZR D705322ZB EZ-CODE KEYCABINET-120 KEYCABINET-200 Matrix S TriCode H.S 045HD Description
www.fordrotunda.com
Page #
SPACING KEY FOR CHRYSLER SEBRING DEPTH KNOB FOR CHRYSLER KEYS THRU DEPTH KNOB FOR CHRYSLER SEBRING K SPACING KEY, MOST GM KEYS DEPTH KNOB FOR MOST GM KEYS KEYS, KNOBS, AND CODE BOOKS KEYS, KNOBS, AND CODE BOOK KEYS, KNOBS, AND CODE BOOK KEYS KNOBS, CODE BOOKS KEYS, KNOBS, AND CODE BOOKS KEYS, KNOBS, AND CODE BOOKS KEYS, KNOBS, AND CODE BOOKS TOYOTA ACCESSORY KIT COMBO KEY MACHINE KEY MACHINE CODE/COPY 10100-12283 MAZDA KEY CODE 6500-7733 MAZDA KEY CODE 1X-1706X MAZDA KEY CODE A-B-C-D-E, FB0-1863 MAZDA KEY MAZDA KEY CODE ACCESSORY KIT THINK AE EXACTA ACCESSORY TIBBE KEY CODE CUT MACHINE TIBBE 8 SPACE DECODER CUTTER FOR DELTAFO FO KEY MACHINE 6 CUT DECODER ELECTRONIC KEY CUTTER-CODE/DUPL. SECURE KEY CABINEY WITH STORAGE FOR 120 KEYS SECURE KEY CABINEY WITH STORAGE FOR 200 KEYS High Security Side Milled Manual Key Machine High Security Side Milled Electronic Key Machine Key duplicator 7-14 7-14 7-15 Page # 7-14 7-15
8-18
DIESEL ENGINE INJECTOR SLEEVE SET GLOW PLUG INJECTOR ADAPTER ENGINE MOUNTING BRACKET 20 TON PRESS WITH BOTTLE JACK FORD, LINCOLN-MERCURY NEW DEALER KIT - TOOLS ONLY LINCOLN-MERCURY NEW DEALER KIT - TOOLS ONLY 8-18
16-22
1-800-ROTUNDA
Item # 014-01539 014-01540 014-01542 014-01555 023 ROBINAIR/SPX Item # 023-00167 023-00171 023-00180 023-00185 023-00186 080 SHURE Item # 080-00083 080-00201 080-00202 080-00416 080-00420 080-00421 080-00422 080-00424 080-00425 080-00426 080-00427 080-00428 080-00465 080-00471 080-00472 080-00473 080-00474 080-00476 080-00477 080-00479 080-00481 080-00482 080-00485 080-00486 080-00488 080-00489 Model # 610049 900595 670162 900684 900738 900301 900313 900687 900688 900692 900690 900691 800015 791434 791446C 791446E 791389 791466 791405 791406 791443 791457 791442 791438 TS6835 TS6860 Description DELUXE STOOL 610049 RETRACTABLE KEYBOARD 900595 SLIDING DRAWER AIM UNIT VINYL MAT 900684 Model # 17686 62121 15500 30036 TIFIR-1 Description 50 LB. TANK WITH FLOAT SWITCH Model # 014-01539 014-01540 5230 206391 Description
www.fordrotunda.com
Page #
FORD, LINCOLN-MERCURY NEW DEALER KIT - W/RED BOXES AND STORAGE RACKS LINCOLN-MERCURY NEW DEALER KIT - W/RED BOXES AND STORAGE RACKS 16-1/2 ton Capacity Bench Press Engine Stand Adapters for 6.0 & 6.4 Diesels Page #
96" LONG ENVIRO-GUARD HOSE FOR AUTOMOTIVE R134A VACUUM PUMP 110, 5 CFM, 2ND STAGE STANDARD A/C CHARGING HOSES - 3PK TIF Infrared Leak Detector 2-1 Page #
3 LOCK SET DOOR/DRAWER 900738 DRAIN PAN 900301 RUBBER MAT 900313 VINYL MAT 900687 VINYL MAT 900688 VINYL MAT 900692 VINYL MAT 900690 VINYL MAT 900691 MTC CABINET 800015 10FT LOWER TC3 SYSTEM 791434 10FT LOWER TC3 SYSTEM 791446C 10FT LOWER TC3 SYSTEM 791446E 6FT LOWER TC3 SYSTEM 791389 4FT LOWER TC3 SYSTEM 791466 10FT UPPER TC3 SYSTEM 791405 6FT UPPER TC3 SYSTEM 791406 5FT UPPER TC3 SYSTEM 791443 4FT UPPER TC3 SYSTEM 791457 3FT UPPER TC3 SYSTEM 791442 2FT UPPER MONITOR ENCLOSURE TC3 791438 TOOL STORAGE TS6835 TOOL STORAGE TS6860
11-3
11-5
16-23
1-800-ROTUNDA
Item # 080-00491 080-00492 080-00493 080-00494 080-00495 080-00496 080-00497 080-00498 080-00499 080-00500 080-00501 080-00503 080-00504 080-00505 080-00506 080-00507 080-00508 080-00511 080-00512 080-00513 080-00514 080-00515 080-00516 080-00522 080-00523 080-00524 080-00525 080-00526 080-00527 080-00528 080-00530 080-00532 080-00533 080-00544 080-00548 080-00549 080-00551 080-00553 080-00559 080-00560 080-00561 080-00567 Model # TS6864 TS6880 791449 791453 791452 791456 791451 791455 791450 791454 791427 791432 791439 800019 800020 800026 800027 900750 900751 900768 900694 900752 900753 900757 900760 900762 791461 791462 791463 791464 900744 310188 310189 TS-7091 800127 800116 TS-7092 TS-7093 800119 800120 800121 510202 Description
www.fordrotunda.com
Page #
TOOL STORAGE, 46W X 54H X 28D TOOL STORAGE, 58W X 50H X 28D 4' PAINTED UTILITY CHASE PANEL 791449 4' STAINLESS UTILITY CHASE PANEL 791453 5' PAINTED UTILITY CHASE PANEL 791452 5' STAINLESS UTILITY CHASE PANEL 791456 6' PAINTED UTILITY CHASE PANEL 6' STAINLESS UTILITY CHASE PANEL 791455 10' PAINTED LEFT HAND RIGHT HAND UTILITY CHASE PANELS 791450 10' STAINLESS LEFT HAND RIGHT HAND UTILITY CHASE PANEL 791454 LIFT UNIT CONCEALMENT PANEL 791427 2' PAINTED UTILITY CHASE PANELS 791432 MONITOR ENCLOSURE DOOR 791439 TECHNICIAN CART 800019 DELUXE TECHNICIAN CART 800020 TC3 SINK STATION 800026 TC3 SINK STATION 800027 10' SHUREGUARD RUBBER MAT 900750 6' SHUREGUARD RUBBER MAT 900751 4' SHUREGUARD RUBBER MAT 900768 10' VINYL MAT 900694 POWER SUPPLY REEL 900752 LIGHT REEL 900753 ROLLER GUIDE ASSEMBLY KIT 900757 KEYBOARD STAND WITH MOUSE PAD 900760 SERVICE PANEL COVER PLATE 900762 10' ANGLED TOP CAP 791461 6' ANGLED TOP CAP 791462 5' ANGLED TOP CAP 791463 4' ANGLED TOP CAP 791464 T/D STAINLESS STEEL INSERT 900744 TWO UNIT STORAGE CABINET SPACE SAVER SINGLE UNIT STORAGE CABINET SPACE SAVER PORTABLE BENCH 4 DRAWER TECHNICIAN SINK SINGLE 36 INCH W MIRROR/SOAP DISPENSER TECHNICIAN SINK DOUBLE 72 INCH PORTABLE BENCH 6 DRAWER PORTABLE BENCH 11 DRAWER BACK STOP SERIES 4 STAINLESS STEEL BACK STOP SERIES 5 STAINLESS STEEL BACK STOP SERIES 6 STAINLESS STEEL 42 PORTABLE AIM UNIT 11-5 11-5 11-5
16-24
1-800-ROTUNDA
Item # 080-00568 080-00569 080-00572 080-00573 080-00574 080-00575 080-00576 080-00577 080-00578 080-00579 080-00580 080-00581 080-00582 080-00583 080-00584 080-00585 080-00586 080-00587 080-00588 080-00589 080-00590 080-00591 080-00592 080-00593 080-00594 080-00595 080-00596 080-00597 080-00598 080-00599 080-00600 080-00601 080-00602 080-00603 080-00604 080-00605 080-00606 Model # 670196 800002 800023 800030 800084 800085 800086 811001 811002 811004 811005 811007 811008 811010 811011 811013 811014 811016 811017 811019 811020 811022 811023 811025 811026 811038 811039 811040 811041 811042 811043 811044 811045 811046 811047 811048 811049 Description
www.fordrotunda.com
Page #
SHURESHOP STACKING DRAWER 21X21X7 CUSTOM SERIES STATIONARY LEG PAIRS STANDARD TEAR DOWN BENCH PORTABLE DRAIN PAN 48"W 32"D 41"H STORAGE CABINET WALL MOUNTED SLIDING DOORS ADJ SHELF SHURESHOP LOWER SHELF 72 X 12 REALITI WORKCENTER 60X24 STAINLESS STEEL TOP REALITI WORKBENCH 60X24 STAINLESS STEEL TOP STATIONARY STEEL TOP OPEN 60"W 24"D STATIONARY WOOD TOP OPEN 60"W 24"D STATIONARY STEEL TOP 2 SLIDING DOORS 60"W 24"D STATIONARY WOOD TOP 2 SLIDING DOORS 60"W 24"D STATIONARY STEEL TOP 2DRAWERS/2DOORS 60"W 24"D STATIONARY WOOD TOP 2DRAWERS/2DOORS 60"W 24"D PORTABLE STEEL TOP OPEN 60"W 24"D PORTABLE WOOD TOP OPEN 60"W 24"D PORTABLE STEEL TOP 2 SLIDING DOORS 60"W 24"D PORTABLE WOOD TOP 2 SLIDING DOORS 60"W 24"D PORTABLE STEEL TOP 2DRAWERS/2DOORS 60"W 24"D PORTABLE WOOD TOP 2DRAWERS/2DOORS 60"W 24"D WALL MOUNT STEEL TOP OPEN 60"W 24"D WALL MOUNT WOOD TOP OPEN 60"W 24"D WALL MOUNT STEEL TOP 2 SLIDING DOORS 60"W 24"D WALL MOUNT WOOD TOP 2 SLIDING DOORS 60"W 24"D WALL MOUNT STEEL TOP 2DRAWERS/2DOORS 60"W 24"D WALL MOUNT WOOD TOP 2DRAWERS/2DOORS 60"W 24"D 29X48 STATIONARY WORKBENCH STEEL TOP 29X60 STATIONARY WORKBENCH STEEL TOP 29X72 STATIONARY WORKBENCH STEEL TOP 34X48 STATIONARY WORKBENCH STEEL TOP 34X60 STATIONARY WORKBENCH STEEL TOP 34X72 STATIONARY WORKBENCH STEEL TOP 29X48 STATIONARY WORKBENCH STEEL TOP W/ ACCESSORY KIT STATIONARY STEEL TOP 60W 29D ACC. KIT 29X72 STATIONARY WORKBENCH STEEL TOP W/ ACCESSORY KIT 34X48 STATIONARY WORKBENCH STEEL TOP W/ ACCESSORY KIT 34X60 STATIONARY WORKBENCH STEEL TOP W/ ACCESSORY KIT 34X72 STATIONARY WORKBENCH STEEL TOP W/ ACCESSORY KIT 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-3 11-4 11-4 11-4 11-5
16-25
1-800-ROTUNDA
Item # 080-00607 080-00608 080-00609 080-00610 080-00611 080-00612 080-00613 080-00614 080-00615 080-00616 080-00617 080-00618 080-00619 080-00620 080-00621 080-00622 080-00623 080-00624 080-00625 080-00626 080-00627 080-00628 080-00629 080-00630 080-00631 080-00632 080-00633 080-00635 080-00636 080-00637 080-00638 080-00639 080-00640 080-00641 080-00642 080-00643 Model # 811063 811064 811066 811067 811100 811101 811102 822001 822002 822003 822004 STS-S1 STS-S2 STS-S3 STS-S4 STS-S5 STS-S6 STS-D1 STS-D2 STS-D3 STS-D4 STS-D5 STS-D6 STS-D7 STS-D8 STS-D9 STS-D10 800212 800214 900650 SPS-8 SPS-5 SPS-3 SPS-0 800217 800218 Description
www.fordrotunda.com
Page # 11-3 11-3 11-3 11-3
29X60 PORTABLE WORKBENCH STEEL TOP W/ ACCESSORY KIT 29X72 PORTABLE WORKBENCH STEEL TOP W/ ACCESSORY KIT 34X60 PORTABLE WORKBENCH STEEL TOP W/ ACCESSORY KIT 34X72 PORTABLE WORKBENCH STEEL TOP W/ ACCESSORY KIT FLUID CONTAINMENT BENCH PORTABLE STAINLESS STEEL TOP 48X32 TRANS MAX TEARDOWN BENCH STATIONARY 73 X 34 TRANS MAX TEARDOWN BENCH PORTABLE 73 X 34 SHURE HYBRID PACKAGES - 5' FREESTANDING LIFT CONCEALMENT SHURE HYBRID PACKAGES - 5' FREESTAND W/O LIFT CONCEALMENT SHURE HYBRID PACKAGES - 10' FREESTANDING LIFT CONCEALMENT SHURE HYBRID PACKAGES - 10' FREESTAND W/O LIFT CONCEALMENT ShureTech 1-Bay with Tool and Storage Cabinets ShureTech 1-Bay with Double Storage Cabinets ShureTech 1-Bay with Double Storage Cabinets ShureTech 1-Bay w/Tool, Storage and trash cabinets ShureTech 1-Bay w/Tool, Storage,Reel cabinets & Lift ShureTech 1-Bay w/Tool, Storage cab.Cart lckr & Lift cntrl ShureTech 2-Bay w/double Tool & Storage cabinets ShureTech 2-Bay w/double Tool & Storage & 1 Trash cabinets ShureTech 2-Bay w/dbl.Tool,Storage,Reel cab & Lift cntrls ShureTech 2-Bay w/dbl Tool, Storage,Cart lckr & Lift cntrl ShureTech 2-Bay w/(1)52"W & (6) 23"W Tool cabinets ShureTech 2-Bay w/(4)36"W & (2) 24"W Storaqe cabinets ShureTech 2-Bay w/(2)29"W Tool(2) 48"W Storaqe & 36"W Sink ShureTech 2-Bay w/(2)29"W Tool(2) 30"W Storaqe(2) 36" Reel ShureTech 2-Bay w/(2)29"W Tool(2) 36"W Storaqe cabinets ShureTech 2-B (2)23"TL(2)24"Cart(2) 24"Rel(1) trsh&Lft Lower Base Storage, 42 7/8W x 18D x 7H Lower Base Storage, 54 7/8W x 18D x 7H Heavy Duty Vise constructed of high strength ductile iron Shure Parts Storage - SPS 8 Drawers, 2 Shelves Shure Parts Storage - SPS 5 Drawers, 3 Shelves Shure Parts Storage - SPS 8 Drawers, 2 Shelves Shure Parts Storage - SPS 5 Shelves Heavy-Duty Workbench - Stationary 60Wx34Dx36H Heavy-Duty Workbench - Stationary 72WX34Dx36H
11-2
16-26
1-800-ROTUNDA
Item # 080-00644 080-00645 080-00646 080-00647 080-00648 080-00649 080-00650 080-00651 080-00652 080-00653 080-00654 080-00655 080-00656 080-00657 080-00658 080-00659 080-00660 080-00661 080-00662 080-00663 080-00664 080-00665 080-00666 082 CHAMPION Item # 082-00633B 082-00633C 082-00633D 082-00633E 082-00634B 082-00634C 082-00634D 082-00634E 082-00635A 082-00635B 082-00635C 082-00635D 082-00635E 082-00636C 082-00636D 082-00636E 082-00637C 082-00637D 082-00637E 082-00638C Model # HR58ADV-230-1 HR58ADV-208-3 HR58ADV-230-3 HR58ADV-460-3 VR58ADV-230-1 VR58ADV-208-3 VR58ADV-230-3 VR58ADV-460-3 VR7F8ADV-208-1 VR7F8ADV-230-1 VR7F8ADV-208-3 VR7F8ADV-230-3 VR7F8ADV-460-3 HR1012ADV-208-3 HR1012ADV-230-3 HR1012ADV-460-3 VR1012ADV-208-3 VR1012ADV-230-3 VR1012ADV-460-3 HRA1512ADV-208-3 Description Model # 800219 800220 800221 800222 TS7863 811164 811165 973726 800223 973766 973763 973764 973765 900827 900829 900828 791609 791610 791611 900832 HS-36 900805 811062 Description
www.fordrotunda.com
Page #
Heavy-Duty Workbench - Portable 60Wx34Dx36H Heavy-Duty Workbench - Portable 72Wx34Dx36H Heavy-Duty Cart 30Wx30Dx36H Heavy-Duty Tear Down Bench - Stationary 60Wx34Dx36H Heavy-Duty Tool Storage Cab.Portable 52Wx27 3/4Dx41 1/4H Shure Safety Station - Basic 36 Shure Safety Station - Deluxe 60 Tire Transport Trolley Ultra Deluxe Technician Cart Tire Rack Tire Cart Tire Cart with Painted Steel Bench Top Tire Cart with Stainless Steel Bench Top 5' Power Strip 6' Power Strip 10' Power Strip Recycle Cabinet - Single Recycle Cabinet - Double Recycle Cabinet - Triple 40 Gallon Mobile Recycling Container with Dolly SHURETECH Sink Cabinet Emergency Eye Wash Attachment ShureShop Portable Workbench Page # 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 11-5 11-5
5 hp Advantage 80H Tank Mount, 230/1 5 hp Advantage 80H Tank Mount, 208/3 5 hp Advantage 80H Tank Mount, 230/3 5 hp Advantage 80H Tank Mount, 460/3 5 hp Advantage 80V Tank Mount, 230/1 5 hp Advantage 80V Tank Mount, 208/3 5 hp Advantage 80V Tank Mount, 230/3 5 hp Advantage 80V Tank Mount, 460/3 7.5 hp Advantage 80V Tank Mount, 208/1 7.5 hp Advantage 80V Tank Mount, 230/1 7.5 hp Advantage 80V Tank Mount, 208/3 7.5 hp Advantage 80V Tank Mount, 230/3 7.5 hp Advantage 80V Tank Mount, 460/3 10 hp Advantage 120H Tank Mount, 208/3 10 hp Advantage 120H Tank Mount, 230/3 10 hp Advantage 120H Tank Mount, 460/3 10 hp Advantage 120V Tank Mount, 208/3 10 hp Advantage 120V Tank Mount, 230/3 10 hp Advantage 120V Tank Mount, 460/3 15 hp Advantage 120H Tank Mount, 208/3
16-27
1-800-ROTUNDA
Item # 082-00638D 082-00638E 082-00639C 082-00639D 082-00639E 082-00640C 082-00640D 082-00640E 082-00641C 082-00641D 082-00641E 082-00642C 082-00642D 082-00642E 082-00643C 082-00643D 082-00643E 082-00644C 082-00644D 082-00644E 082-00645C 082-00645D 082-00645E 082-00646B 082-00646C 082-00646D 082-00646E 082-00647A 082-00647B 082-00647C 082-00647D 082-00647E 082-00648A 082-00648B 082-00648C 082-00648D 082-00648E 082-00649C 082-00649D 082-00649E 082-00650C 082-00650D 082-00650E 082-00651C 082-00651D Model # HRA1512ADV-230-3 HRA1512ADV-460-3 HRA1525PKG-208-3 HRA1525PKG-230-3 HRA1525PKG-460-3 HRA2012PKG-208-3 HRA2012PKG-230-3 HRA2012PKG-460-3 HRA2025PKG-208-3 HRA2025PKG-230-3 HRA2025PKG-460-3 HRA2512ADV-208-3 HRA2512ADV-230-3 HRA2512ADV-460-3 HRA2525PKG-208-3 HRA2525PKG-230-3 HRA2525PKG-460-3 HRA3012PKG-208-3 HRA3012PKG-230-3 HRA3012PKG-460-3 HRA3025PKG-208-3 HRA3025PKG-230-3 HRA3025PKG-460-3 HR5D12ADV-230-1 HR5D12ADV-208-3 HR5D12ADV-230-3 HR5D12ADV-460-3 HR7D12PKG-208-1 HR7D12ADV-230-1 HR7D12ADV-208-3 HR7D12ADV-230-3 HR7D12ADV-460-3 HR7D25PKG-208-1 HR7D25PKG-230-1 HR7D25PKG-208-3 HR7D25PKG-230-3 HR7D25PKG-460-3 HR10D12PKG-208-3 HR10D12ADV-230-3 HR10D12PKG-460-3 HR10D25PKG-208-3 HR10D25PKG-230-3 HR10D25PKG-460-3 HR15D25PKG-208-3 HR15D25PKG-230-3 Description
www.fordrotunda.com
Page # 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2
15 hp Advantage 120H Tank Mount, 230/3 15 hp Advantage 120H Tank Mount, 460/3 15 hp Fully Package 250H Tank Mount, 208/3 15 hp Fully Package 250H Tank Mount, 230/3 15 hp Fully Package 250H Tank Mount, 460/3 20 hp Fully Package 120H Tank Mount, 208/3 20 hp Fully Package 120H Tank Mount, 230/3 20 hp Fully Package 120H Tank Mount, 460/3 20 hp Fully Package 250H Tank Mount, 208/3 20 hp Fully Package 250H Tank Mount, 230/3 20 hp Fully Package 250H Tank Mount, 460/3 25 hp Advantage 120H Tank Mount, 208/3 25 hp Advantage 120H Tank Mount, 230/3 25 hp Advantage 120H Tank Mount, 460/3 25 hp Fully Package 250H Tank Mount, 208/3 25 hp Fully Package 250H Tank Mount, 230/3 25 hp Fully Package 250H Tank Mount, 460/3 30 hp Fully Package 120H Tank Mount, 208/3 30 hp Fully Package 120H Tank Mount, 230/3 30 hp Fully Package 120H Tank Mount, 460/3 30 hp Fully Package 250H Tank Mount, 208/3 30 hp Fully Package 250H Tank Mount, 230/3 30 hp Fully Package 250H Tank Mount, 460/3 DUPLEX 5 hp Advantage 120H Tank Mount, 230/1 DUPLEX 5 hp Advantage 120H Tank Mount, 208/3 DUPLEX 5 hp Advantage 120H Tank Mount, 230/3 DUPLEX 5 hp Advantage 120H Tank Mount, 460/3 DUPLEX 7.5 hp Fully Package 120H Tank Mount, 208/1 DUPLEX 7.5 hp Advantage 120H Tank Mount, 230/1 DUPLEX 7.5 hp Advantage 120H Tank Mount, 208/3 DUPLEX 7.5 hp Advantage 120H Tank Mount, 230/3 DUPLEX 7.5 hp Advantage 120H Tank Mount, 460/3 DUPLEX 7.5 hp Fully Package 250H Tank Mount, 208/1 DUPLEX 7.5 hp Fully Package 250H Tank Mount, 230/1 DUPLEX 7.5 hp Fully Package 250H Tank Mount, 208/3 DUPLEX 7.5 hp Fully Package 250H Tank Mount, 230/3 DUPLEX 7.5 hp Fully Package 250H Tank Mount, 460/3 DUPLEX 10 hp Fully Package 120H Tank Mount, 208/3 DUPLEX 10 hp Advantage 120H Tank Mount, 230/3 DUPLEX 10 hp Fully Package 120H Tank Mount, 460/3 DUPLEX 10 hp Fully Package 250H Tank Mount, 208/3 DUPLEX 10 hp Fully Package 250H Tank Mount, 230/3 DUPLEX 10 hp Fully Package 250H Tank Mount, 460/3 DUPLEX 15 hp Fully Package 250H Tank Mount, 208/3 DUPLEX 15 hp Fully Package 250H Tank Mount, 230/3
16-28
1-800-ROTUNDA
Item # 082-00651E 082-00652C 082-00652D 082-00652E 082-00653C 082-00653D 082-00653E 082-00654C 082-00654D 082-00654E 082-00667 082-00695 082-00696 082-00697 082-00698 082-00702 082-00703 082-00704 082-00705 082-00706 082-00707 082-00708 082-00709 082-00755 082-00756 082-00757 082-00758 082-00770 082-00771 082-00783 082-00784 082-00785 082-00786 082-00787 082-00788 082-00789 082-00790 082-00791 082-00792A 082-00792B 082-00792C 082-00792D 082-00792E 082-00793A 082-00793B Model # HR15D25PKG-460-3 HR20D25PKG-208-3 HR20D25PKG-230-3 HR20D25PKG-460-3 HR25D25PKG-208-3 HR25D25PKG-230-3 HR25D25PKG-460-3 HR30D25PKG-208-3 HR30D25PKG-230-3 HR30D25PKG-460-3 AUTOTANKD Z1687 Z1688 Z1689 Z1686 CRN125 CRN100 CRN150 CRN200 CRN25 CRN35 CRN50 CHACRN75 Z11882 Z11883 Z11884 Z11885 CASRSA126 HGR7-3K CFF20EDP CFF35EDP CFF60EDP CFF100EDG CFF170EDG CFF250EDG CSP15 CSP30 P14240A VR78PKG-208-1 VR78PKG-230-1 VR78PKG-208-3 VR78PKG-230-3 VR78PKG-460-3 HR7F8PKG-208-1 HR7F8PKG-230-1 Description
www.fordrotunda.com
Page # 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2 7-2
DUPLEX 15 hp Fully Package 250H Tank Mount, 460/3 DUPLEX 20 hp Fully Package 250H Tank Mount, 208/3 DUPLEX 20 hp Fully Package 250H Tank Mount, 230/3 DUPLEX 20 hp Fully Package 250H Tank Mount, 460/3 DUPLEX 25 hp Fully Package 250H Tank Mount, 208/3 DUPLEX 25 hp Fully Package 250H Tank Mount, 230/3 DUPLEX 25 hp Fully Package 250H Tank Mount, 460/3 DUPLEX 30 hp Fully Package 250H Tank Mount, 208/3 DUPLEX 30 hp Fully Package 250H Tank Mount, 230/3 DUPLEX 30 hp Fully Package 250H Tank Mount, 460/3 AUTO TANK DRAIN VERT RECEIVER 120 GAL VERT RECEIVER 240 GAL VERT RECEIVER 400 GAL VERT RECEIVER 80 GAL NON-CYCLING AIR DRYER 125CFM NON-CYCLING AIR DRYER 100CFM NON-CYCLING AIR DRYER 150CFM NON-CYCLING AIR DRYER 200CFM NON-CYCLING AIR DRYER 25CFM NON-CYCLING AIR DRYER 35CFM NON-CYCLING AIR DRYER 50CFM NON-CYCLING AIR DRYER 75CFM RECIP SERVICE KIT-R/RV15 PUMP RECIP SERVICE KIT-R/RV30 PUMP RECIP SERVICE KIT - R40 PUMP RECIP SERVICE KIT - R70 PUMP 5 HP SIMPLEX 80 GAL VERT 1P STR VI ATD LOLM, ACAC 13HP GAS DRIVEN QUICK DISCONNECT MODULE High Efcient Oil Removal Filter, 3/8" NPTF - 20 SCFM High Efcient Oil Removal Filter, 1/2" NPTF - 35 SCFM High Efcient Oil Removal Filter, 3/4" NPTF - 60 SCFM High Efcient Oil Removal Filter, 3/4" NPTF - 100 SCFM High Efcient Oil Removal Filter, 1" NPTF - 170 SCFM High Efcient Oil Removal Filter, 1-1/2" NPTF - 250 SCFM ENVOROCHAMP2 - 15 GALLON OIL/WATER SEPARATOR ENVOROCHAMP2 - 30 GALLON OIL/WATER SEPARATOR ELECTRIC TANK DRAIN 7.5 hp Fully Package 80V Tank Mount, 208-1 7.5 hp Fully Package 80V Tank Mount, 230-1 7.5 hp Fully Package 80V Tank Mount, 208-3 7.5 hp Fully Package 80V Tank Mount, 230-3 7.5 hp Fully Package 80V Tank Mount, 460-3 7.5 hp FAST Fully Package 80H Tank Mount, 208-1 7.5 hp FAST Fully Package 80H Tank Mount, 230-1
16-29
1-800-ROTUNDA
Item # 082-00793C 082-00793D 082-00793E 082-00794A 082-00794B 082-00794C 082-00794D 082-00794E 082-00795C 082-00795D 082-00795E 082-00796C 082-00796D 082-00796E 082-00797A 082-00797B 082-00797C 082-00797D 082-00797E 082-00798A 082-00798B 082-00798C 082-00798D 082-00798E 082-00799M100 082-00799M150 082-00799S100 082-00799S150 082-00800M100 082-00800M150 082-00800S100 082-00800S150 082-00801M100 082-00801M150 082-00802M115 082-00803M115 082-00804M115 082-00805M115 082-00806E 082-00807D 082-00807E 082-00808D 082-00808E 082-00809D 082-00809E Model # HR7F8PKG-208-3 HR7F8PKG-230-3 HR7F8PKG-460-3 HR78PKG-208-1 HR78PKG-230-1 HR78PKG-208-3 HR78PKG-230-3 HR78PKG-460-3 HR15F12PKG-208-3 HR15F12PKG-230-3 HR15F12PKG-460-3 HR15F24PKG-208-3 HR15F24PKG-230-3 HR15F24PKG-460-3 CASQEA-5-208-1 CASQEA-5-230-1 CASQEA-5-208-3 CASQEA-5-230-3 CASQEA-5-460-3 CASQEA-7-208-1 CASQEA-7-230-1 CASQEA-7-208-3 CASQEA-7-230-3 CASQEA-7-460-3 V04ACE07-2336DA V04ACE10-2336DA V04ACE07-2316DA V04ACE10-2316DA V05ACE07-2336DA V05ACE10-2336DA V05ACE07-2316DA V05ACE10-2316DA V07ACE07-2336DA V07ACE10-2336DA V11ACE08-2336DA V15ACE08-2336DA V18ACE08-2336DA V22ACE08-2336DA V07ACE07-4035VA V11ACE08-2035VA V11ACE08-4035VA V15ACE08-2035VA V15ACE08-4035VA V18ACE08-2035VA V18ACE08-4035VA Description
www.fordrotunda.com
Page #
7.5 hp FAST Fully Package 80H Tank Mount, 208-3 7.5 hp FAST Fully Package 80H Tank Mount, 230-3 7.5 hp FAST Fully Package 80H Tank Mount, 460-3 7.5 hp Fully Package 80H Tank Mount, 208-1 7.5 hp Fully Package 80H Tank Mount, 230-1 7.5 hp Fully Package 80H Tank Mount, 208-3 7.5 hp Fully Package 80H Tank Mount, 230-3 7.5 hp Fully Package 80H Tank Mount, 460-3 15 hp FAST Fully Package 120H Tank Mount, 208-3 15 hp FAST Fully Package 120H Tank Mount, 230-3 15 hp FAST Fully Package 120H Tank Mount, 460-3 15 hp FAST Fully Package 240H Tank Mount, 208-3 15 hp FAST Fully Package 240H Tank Mount, 230-3 15 hp FAST Fully Package 240H Tank Mount, 460-3 5hp Quiet Enclosed Reciprocating Compressor 208V 1PH 5hp Quiet Enclosed Reciprocating Compressor 230V 1PH 5hp Quiet Enclosed Recip. Compressor 208 3PH 5hp Quiet Enclosed Recip. Compressor 230 3PH 5hp Quiet Enclosed Recip. Compressor 460 3PH 7.5hp Quiet Enclosed Reciprocating Compressor 208V 1PH 7.5hp Quiet Enclosed Reciprocating Compressor 230V 1PH 7.5hp Quiet Enclosed Recip. Compressor 208 3PH 7.5hp Quiet Enclosed Recip. Compressor 230 3PH 7.5hp Quiet Enclosed Recip. Compressor 460 3PH hydrovane 5hp Compressor, 100PSIG, 208-230, 460V, 3PH hydrovane 5hp Compressor, 150PSIG, 208-230, 460V, 3PH hydrovane 5hp Compressor, 100PSIG, 208-230V 1PH hydrovane 5hp Compressor, 150PSIG, 208-230V 1PH hydrovane 7.5hp Compressor, 100PSIG, 208-230, 460V, 3PH hydrovane 7.5hp Compressor, 150PSIG, 208-230, 460V, 3PH hydrovane 7.5hp Compressor, 100PSIG, 208-230V 1PH hydrovane 7.5hp Compressor, 150PSIG, 208-230V 1PH hydrovane 10hp Compressor, 100PSIG, 208-230, 460V, 3PH hydrovane 10hp Compressor, 150PSIG, 208-230, 460V, 3PH hydrovane 15hp Compressor, 115PSIG, 208-230, 460V, 3PH hydrovane 20hp Compressor, 115PSIG, 208-230, 460V, 3PH hydrovane 25hp Compressor, 115PSIG, 208-230, 460V, 3PH hydrovane 30hp Compressor, 115PSIG, 208-230, 460V, 3PH hydrovane 10hp Regulated Speed Compressor, 460V, 3PH hydrovane 15hp Regulated Speed Compressor, 230V, 3PH hydrovane 15hp Regulated Speed Compressor, 460V, 3PH hydrovane 20hp Regulated Speed Compressor, 230V, 3PH hydrovane 20hp Regulated Speed Compressor, 460V, 3PH hydrovane 25hp Regulated Speed Compressor, 230V, 3PH hydrovane 25hp Regulated Speed Compressor, 460V, 3PH 7-4 7-4 7-4 7-4 7-4 7-4 7-4 7-4 7-4 7-3 7-3 7-3 7-3
16-30
1-800-ROTUNDA
Item # 082-00810D 082-00810E 082-00811M100 082-00811M150 082-00811S100 082-00811S150 082-00812M100 082-00812M150 082-00812S100 082-00812S150 082-00813E 082-00813M100 082-00813M150 082-00814 082-00815 082-00816 082-00817 082-00818 082-00819M100 082-00819M125 082-00819M150 082-00819M190 082-00820M100 082-00820M125 082-00820M150 082-00820M190 082-00821M100 082-00821M125 082-00821M150 082-00821M190 082-00822M100 082-00822M125 082-00822M150 082-00822M190 082-00823M100 082-00823M125 082-00823M150 082-00823M190 082-00824E100 082-00824E125 082-00824E190 082-00825E100 082-00825E125 082-00825E190 Model # V22ACE08-2035VA V22ACE08-4035VA V04AERD07-2336DA V04AERD10-2336DA V04AERD07-2316DA V04AERD10-2316DA V05AERD07-2336DA V05AERD10-2336DA V05AERD07-2316DA V05AERD10-2316DA V07AERD-4035VA V07AERD07-2336DA V07AERD10-2336DA K703364 K0083531 K0074384 PA2042334 PA2042351 L07AC100TVCL10 L07AC125TVCL10 L07AC150TVCL10 L07AC190TVCL10 L11AC100TVCL10 L11AC125TVCL10 L11AC150TVCL10 L11AC190TVCL10 L15AC100TVCL10 L15AC125TVCL10 L15AC150TVCL10 L15AC190TVCL10 L18AC100TVCL10 L18AC125TVCL10 L18AC150TVCL10 L18AC190TVCL10 L22AC100TVCL10 L22AC125TVCL10 L22AC150TVCL10 L22AC190TVCL10 L30AC100DVCL10 L30AC125DVCL10 L30AC190DVCL10 L37AC100DVCL10 L37AC125DVCL10 L37AC190DVCL10 Description
www.fordrotunda.com
Page #
hydrovane 30hp Regulated Speed Compressor, 230V, 3PH hydrovane 30hp Regulated Speed Compressor, 460V, 3PH hydrovane 5hp 80Gal Tank Mount w/dryer, 100PSIG, 3PH hydrovane 5hp 80Gal Tank Mount w/dryer, 150PSIG, 3PH hydrovane 5hp 80Gal Tank Mount w/dryer, 100PSIG, 1PH hydrovane 5hp 80Gal Tank Mount w/dryer, 150PSIG, 1PH hydrovane 7.5hp 80Gal Tank Mount w/dryer, 100PSIG, 3PH hydrovane 7.5hp 80Gal Tank Mount w/dryer, 150PSIG, 3PH hydrovane 7.5hp 80Gal Tank Mount w/dryer, 100PSIG, 1PH hydrovane.7.5hp 80Gal Tank Mount w/dryer, 150PSIG, 1PH hydrovane 10hp 80 Gal Tank Mt w/dryer Reg Speed, 460V 3PH hydrovane 10hp 80Gal Tank Mount w/dryer, 100PSIG, 3PH hydrovane 10hp 80Gal Tank Mount w/dryer, 150PSIG, 3PH hydrovane CS300 Lubricant - 1 Quart hydrovane CS300 Lubricant - 1 Gallon Pail hydrovane CS300 Lubricant - 5 Gallon Pail hydrovane Platinum Warranty Kit 5 - 10hp hydrovane Platinum Warranty Kit 15 - 30hp CompAir L07 10hp 100PSI AC 208-230/460 CL10 Lube CompAir L07 10hp 125PSI AC 208-230/460 CL10 Lube CompAir L07 10hp 150PSI AC 208-230/460 CL10 Lube CompAir L07 10hp 190PSI AC 208-230/460 CL10 Lube CompAir L11 15hp 100PSI AC 208-230/460 CL10 Lube CompAirL11 15hp 125PSI AC 208-230/460 CL10 Lube CompAir L11 15hp 150PSI AC 208-230/460 CL10 Lube CompAir L11 15hp 190PSI AC 208-230/460 CL10 Lube CompAir L15 20hp 100PSI AC 208-230/460 CL10 Lube CompAir L15 20hp 125PSI AC 208-230/460 CL10 Lube CompAir L15 20hp 150PSI AC 208-230/460 CL10 Lube CompAir L15 20hp 190PSI AC 208-230/460 CL10 Lube CompAir L18 25hp 100PSI AC 208-230/460 CL10 Lube CompAir L18 25hp 125PSI AC 208-230/460 CL10 Lube CompAir L18 25hp 150PSI AC 208-230/460 CL10 Lube CompAir L18 25hp 190PSI AC 208-230/460 CL10 Lube CompAir L22 30hp 100PSI AC 208-230/460 CL10 Lube CompAir L22 30hp 125PSI AC 208-230/460 CL10 Lube CompAir L22 30hp 150PSI AC 208-230/460 CL10 Lube CompAir L22 30hp 190PSI AC 208-230/460 CL10 Lube CompAir L30 40hp 100PSI AC 460V 3P CL10 Lube CompAir L30 40hp 125PSI AC 460V 3P CL10 Lube CompAir L30 40hp 190PSI AC 460V 3P CL10 Lube CompAir L37 50hp 100PSI AC 460V 3P CL10 Lube CompAir L37 50hp 125PSI AC 460V 3P CL10 Lube CompAir L37 50hp 190PSI AC 460V 3P CL10 Lube 7-4 7-4 7-6 7-4 7-4 7-4 7-4
16-31
1-800-ROTUNDA
Item # 082-00826M100 082-00826M125 082-00826M150 082-00826M190 082-00827E 082-00828 082-00829 082-00830 082-00831 082-00832 082-00833 082-00834M100 082-00834M125 082-00834M150 082-00834M190 104 HENNESSY Item # 104-00013 104-00014 104-00029 104-00034 104-00035 104-00036 104-00037 104-00038 104-00039 104-00040 104-00041 104-00042 104-00043 104-00046 104-00047 104-00048 104-00062 104-00063 104-00071 104-00078 104-00079 104-00080 104-00082 104-00111 Model # 5748 4775 2500 3481 9708 7075 9499 9195 9196 9489 3178 6936 7500 8500 2760 9582 4282 8650 9233 2160 9399/3590 8750 25882 108028 Description TRUCK ARBOR 1 7/8 TRUCK ARBOR SET 1 7/8 LATHE BENCH TRUCK ARBOR 1 7/8 ARBOR SET 11/16 DELUXE SILENCER LIGHT TRUCK ADAPTER SET DOUBLE TAPER ADAPTER TRUCK DOUBLE TAPER ADAPTER TRUCK HUB LESS ADAPTER CENTERING CONE CROSS FEED EXTENSION DISC LATHE DRUM MICROMETER DISC MICROMETER Model # L22SRAC100TVCL10 L22SRAC125TVCL10 L22SRAC150TVCL10 L22SRAC190TVCL10 L37RSAC460VCL10 PA204-2209 PA204-2161-1 PA204-2354 204-2153-Q 204-2153-G 204-2153-5 L22RSAC100TVCL10 L22RSAC125TVCL10 L22RSAC150TVCL10 L22RSAC190TVCL10 Description
www.fordrotunda.com
Page #
CompAir L22SR 30hp Variable Speed 100PSI AC 208-230/460 CL10 CompAir L22SR 30hp Variable Speed 125PSI AC 208-230/460 CL10 CompAir L22SR 30hp Variable Speed 150PSI AC 208-230/460 CL10 CompAir L22SR 30hp Variable Speed 190PSI AC 208-230/460 CL10 CompAir L37RS 50hp Variable Speed AC 460V CL10 Lube CompAir L07-L11 Platinum Warranty Kit CompAir L15-L22 Platinum Warranty Kit CompAir L30/L37 Platinum Warranty Kit CompAir CompLube 10 Compressor Lubricant - 1 Quart CompAir CompLube 10 Compressor Lubricant - 1 Gallon Pail CompAir CompLube 10 Compressor Lubricant - 5 Gallon Pail CompAir L22RS 30HP Variable Spd Compressor 100 PSI CompAir L22RS 30HP Variable Spd Compressor 125 PSI CompAir L22RS 30HP Variable Spd Compressor 150 PSI CompAir L22RS 30HP Variable Spd Compressor 190 PSI Page #
1-5
CALIBRATION CHECK GAUGE 8500 BEARING PROTECTOR BRAKE SHOP SETTING GAUGE DOUBLE TAPER CONE SET PROBE ADPT/104 BR LATHES TRUCK SPRING SET FINISHER 1 .25 NUT FOR 11/16 ADJUSTABLE TIRE SPREADER
16-32
1-800-ROTUNDA
Item # 104-00112 104-00113 104-00114 104-00115 104-00117 104-00119 104-00120 104-00154 104-00155 104-00164 104-00165 104-00166 104-00167 104-00170 104-00171 104-00213 104-00215 104-00220 104-00221 104-00222 104-00223 104-00226 104-00300 104-00303 104-00304 104-00308 104-00309 104-00417 104-00418 104-00502 104-00505 104-00508 104-00581 104-00612 104-00613 104-00614 104-00615 104-00616 104-00617 104-00618 104-00619 104-00620 104-00622 104-00623 104-00624 Model # 106568 101701 106637 107764 HIT6000-3 HIT6000-1 107686 1175 6914-10 2800 900001 900002 900003 112420 112421 309060 309067 6401-1 501 143622 143935 6401-2 7900 5065AX 5065EX 7065AX 7065EX 1055-1 1055-3 2510 9310 4000B 9313 3101 3102 3106 3107 3108 3109 3110 3123 3125 3902 3903 3904 Description CUS WHEEL PROT FOREIGN CR ADAPTER BEAD LOOSEN T1 SPEED MAG ADAPTER KT
www.fordrotunda.com
Page #
3 PHASE 220 VOLT TRUCK TIRE CHANGER 1 PHASE 220 VOLT TRUCK TIRE CHANGER SPEED MAG ADAPTER KT SILENCER 12 TOOL BITS LATHE ENCLOSURE ADAPTER SET, MOST CARS ADAPTER SET, CARS/LIGHT TRUCKS ADAPTER SET, CARS - 1TON TRUCKS WHEEL ADAPTERS WHEEL ADAPTERS COMB ADAPTER KIT TRUCK CONE KIT-LIGHT TRUCKS TRUCK WHEEL BALANCER 220 V 1PHSE WHEEL DOLLY FOR 6401 SPACER PLATE LARGE BUD ADAPTER FOR 6401 TRUCK WHEEL BALANCER 3PH TWIN CUTTER TOOL RIM CLAMP TIRE CHANGER, AIR RIM CLAMP TIRE CHANGER, ELECTRIC RIM CLAMP TIRE CHANGER RIM CLAMP TIRE CHANGER WHEEL BALANCER 220V 1PH WHEEL BALANCER 220V 3PH BACKLESS BENCH ADAPTER, COMPOSITE SET-CAR BRAKE LATHE WITH NO ADAPTERS TRUCK ADAPTER, COMPOSITE SET ARBOR ARBOR NUT CONE CONE CONE HUB LESS ADAPTER SPRING ADAPTER HUB LESS ADAPTER SPACER CONE CONE CONE 1-3, 1-5 1-5 15-5 15-5 15-5 15-5 1-5 1-5, 1-6 1-6
16-33
1-800-ROTUNDA
Item # 104-00625 104-00626 104-00627 104-00629 104-00630 104-00631 104-00632 104-00633 104-00634 104-00635 104-00637 104-00642 104-00643 104-00644 104-00645 104-00646 104-00647 104-00648 104-00652 104-00653 104-00654 104-00656 104-00662 104-00663 104-00664 104-00665 104-00666 104-00668 104-00669 104-00670 104-00671 104-00672 104-00673 104-00674 104-00676 104-00677 104-00678 104-00679 104-00680 104-00683 104-00684 104-00685 104-00686 104-00687 104-00688 Model # 9192 9193 9194 9490 9492 9921 9922 8740 2760-50 8500-50 9263 520 112567 112568 8111853 7306 7313 909234 183491 112954 23748 112898 112760 112762 112880 112879 110467 8184262 8113041 8113032 8113057 8113060 8113042 8113033 8113061 8113043 8113034 8113059 8113062 940928 8KPPBM28 8113153 8113224 8113082 8113086 Description DUAL TAPER ADAPTER DUAL TAPER ADAPTER DUAL TAPER ADAPTER IMPORT ADAPT ADAPTER DUAL TAPER ADAPTER DUAL TAPER ADAPTER SWIRL GRINDER METRIC DISK MIS METRIC DRUM MIC HUB LESS ADAPTER WHEEL LIFT PNEUMATIC HUB NUT PNEUMATIC HUB NUT TRUCK CONE KIT 40MM ADAPTER BLDR BLEEDER ADAPTER CONE ADAPTER BUMP & ROLL RUBBER LIP FUNNEL/2400 STUD PLATE 8X170 MM STUD PLATE 5X5.5 STUD PLATE 5X5.5 STUD PLATE 5X135 MM STUD PLATE 5X135 MM CONE KIT - MEDIUM
www.fordrotunda.com
Page #
15-7
15-5
22" EXTENSION CLAMPING UPGRADE KIT 28MM OFFSET TRUCK WHEEL ADAPTER SE 28MM OFFSET TRUCK WHEEL ADAPTER 28MM OFFSET TRUCK WHEEL ADAPTER 28MM OFFSET TRUCK WHEEL ADAPTER 40MM OFFSET TRUCK WHEEL ADAPTER 40MM OFFSET TRUCK WHEEL ADAPTER 40MM OFFSET TRUCK WHEEL ADAPTER 2" OFFSET TRUCK WHEEL ADAPT 2" OFFSET TRUCK WHEEL ADAPT 2" OFFSET TRUCK WHEEL ADAPT 2" OFFSET TRUCK WHEEL ADAPT 4X4 PRESSED ROTOR ADAPTER 28MM PIN PLATE SYSTEM PIN-PLATE SYSTEM WALL STORAGE BOARD 40MM CONVERSION SHAFT 40MM CONVERSION SHAFT 15-8 15-8 15-7 15-9 15-9
16-34
1-800-ROTUNDA
Item # 104-00689 104-00690 104-00691 104-00692 104-00693 104-00694 104-00695 104-00696 104-00699 104-00700 104-00701 104-00702 104-00703 104-00704 104-00705 104-00706 104-00707 104-00708 104-00709 104-00710 104-00711 104-00712 104-00713 104-00714 104-00715 104-00716 104-00718 104-00720 104-00725 104-00726 104-00727 104-00728 104-00729 104-00730 104-00731 104-00732 104-00733 104-00739 104-00740 104-00741 104-00742 104-00743 104-00744 Model # 8113307 8113167 8113276C 8113277C 8113326C 8113330C 8113308 8113309 XR1800 113428 113593 113594 113391 9024E 941053 941054 941055 8K113211 8K113302 113206 113207 113208 113209 113210 113211 113212 8184327 XR1850 874021852 874021247 874020798 XR1750-2D 81137503 XR1750-3D 81137509 HIT5000 7110852 7110842 8183803 XR1750-3DI 81137504 8113212C 8113689C 8113695C 8113714C 8113702C Description 40MM CONVERSION SHAFT BALANCER SHAFT-LONGER
www.fordrotunda.com
Page #
LIGHT TRUCK FRONT CONE KIT 28MM I 40MM IMPROVED LIGHT TRUCK CONE BALANCER CHUCK KIT 28MM ID BALANCER CHUCK KIT 40MM XL PRESSURE DRUM 28MM XL PRESSURE DRUM 40MM COATS XR1800 WHEEL BALANCER BASIC ADAPTER SET EXTENDED ADAPTER SET PREMIUM ADAPTER SET BALANCER ADAPTER MATE COATS 9024E RIM CLAMP TIRE CHANGER TOOL BOARD AND CANOPY SIDE CABINET LATHE TOOL BOX FIXED FINGER PLATE KIT 28MM, 1A-7A WITH STORAGE BOARD FIXED FINGER PLATE KIT 40MM, 1B-8B WITH STORAGE BOARD FIXED FINGER PLATE 1A FIXED FINGER PLATE 2A FIXED FINGER PLATE 3A FIXED FINGER PLATE 4A FIXED FINGER PLATE 5A FIXED FINGER PLATE 6A FIXED FINGER PLATE 7A 24 X-OUT CLAMP KIT" XR1850 COMPUTER BALANCER CLAMP FOR ALLOY WHEELS CENTERING CONE AND BACK STAR FLANGE ADAPTER XR1750-2D WHEEL BALANCER 40MM WITH SPEED NUT XR1750-3D WHEEL BALANCER 40MM WITH SPEED NUT TRUCK TIRE CHANGER OFFSET DISC TOOL HOLDER HIT 5000 RAMP FOR HIT 5000 BOLT CIRCLE ADAPTER FOR HIT 5000 XR1750-3DI WHEEL BALANCER 40MM WITH SPEED NUT FIXED FINGER PLATE FFP7A 5 TAPER FIXED FINGER PLATE FFP8A 6 TAPER FIXED FINGER PLATE FFP9A 5 TAPER FIXED FINGER PLATE FFP10A 5 TAPER FIXED FINGER PLATE FFP11A 8 TAPER
15-8 1-5 1-5 1-5 15-8 15-8 15-8 15-8 15-8 15-8 15-8
16-35
1-800-ROTUNDA
Item # 104-00745 104-00746 104-00747 104-00748 104-00749 104-00750 104-00751 104-00752 104-00753 104-00754 104-00755 104-00756 104-00757 104-00758 104-00759 104-00760 104-00761 104-00762 104-00763 104-00764 104-00765 104-00766 104-00767 113113 113834 Model # 8113708C 8113720C 8113213C 8113214C 8113215C 8113216C 8113217C 8113218C 8113219C 8113692C 8113699C 8113717C 8113705C 8113711C 8113723C 1141821 520XRLINK 113592 8KF150CFFP Description
www.fordrotunda.com
Page # 15-8 15-8 15-8 15-8 15-8 15-8 15-8
FIXED FINGER PLATE FFP12A 8 TAPER FIXED FINGER PLATE FFP13A 5 TAPER FIXED FINGER PLATE FFP1B 4 TAPER FIXED FINGER PLATE FFP2B 4 TAPER FIXED FINGER PLATE FFP3B 5 TAPER FIXED FINGER PLATE FFP4B 5 TAPER FIXED FINGER PLATE FFP5B 5 TAPER FIXED FINGER PLATE FFP6B 5 BALL FIXED FINGER PLATE FFP7B 5 TAPER FIXED FINGER PLATE FFP8B 6 TAPER FIXED FINGER PLATE FFP9B 5 TAPER FIXED FINGER PLATE FFP10B 5 TAPER FIXED FINGER PLATE FFP11B 8 TAPER FIXED FINGER PLATE FFP12B 8 TAPER FIXED FINGER PLATE FFP13B 5 TAPER ULTRA LOW ANGLE 3 DEGREE CONE 520 WHEEL LIFT WITH XR COMP LINK PLATE 520 WHEEL LIFT LINK PLATE ULTRA LOW ANGLE 3 DEGREE CONE & GX135 FIXED FINGER PLATE COATS BALANCER CONVERSION KIT 28MM TO 40MM WHEEL LIFT HOLE GAUGE FOR PIN-PLATES PIN-PLATE #4, 28MM I.D., 6X4.50"/6X5.50"/6X127MM/6X135 MM/8X170MM/8X6.50", 8 PINS 24X70.5MM FUNNEL NOSE, INSTRUCTION SHEET, APPLICATION CHART PIN-PLATE #4, 40MM I.D., 6X4.50"/6X5.50"/6X127MM/6X135
15-9
104-00768
113840
MM/8X170MM/8X6.50", 8 PINS 24X70.5MM FUNNEL NOSE, INSTRUCTION SHEET, APPLICATION CHART COATS 1250 WHEEL BALANCER WITH LASER GUIDED OPERATION 220V 1P COATS 1250 WHEEL BALANCER WITH LASER GUIDED OPERATION 220V 3P 1250 BASIC PASSENGER CAR COVERAGE KIT. INCLUDES 28MM SHAFT, 3 PASSENGER CONES, 1 TRUCK CONE, WHEEL WEIGHT PLIERS, CALIPERS, HUB NUT , SMALLALL PRESSURE CUP , SPRING, RUBBER LIP . 1250 EXTENDED PASSENGER CAR COVERAGE KIT. INCLUDES
104-00769 104-00770
121250 12125002
15-7
104-00772
114335
104-00773
114337
CONTENTS OF 8114335, PLUS SHORT CONE, LIGHT CONE KIT, AND FACEPLATE EXTENSION - 28mm 1250 PREMIUM PASSENGER & LIGHT TRUCK COVERAGE KIT.
104-00774
114338
INCLUDES CONTENTS OF 8114337, PLUS PIN PLATE SYSTEM WITH BALANCER MATE MOBILE STORAGE RACK - 28mm
16-36
1-800-ROTUNDA
Item # Model # Description
www.fordrotunda.com
Page #
1250 BASIC PASSENGER CAR COVERAGE KIT. INCLUDES 104-00775 114339 40MM SHAFT, 3 PASSENGER CONES, 1 TRUCK CONE, WHEEL WEIGHT PLIERS, CALIPERS, HUB NUT , SMALLALL PRESSURE CUP , SPRING, RUBBER LIP . 1250 EXTENDED PASSENGER CAR COVERAGE KIT. INCLUDES 104-00776 114341 CONTENTS OF 8114339, PLUS SHORT CONE, LIGHT CONE KIT, AND FACEPLATE EXTENSION - 40mm 1250 PREMIUM PASSENGER & LIGHT TRUCK COVERAGE KIT. 104-00777 104-00778 104-00779 104-00780 104-00781 104-00782 104-00783 104-00784 104-00785 104-00787 104-00788 104-00789 104-00790 104-00791 104-00792 104-00793 104-00794 104-00795 104-00796 104-00797 104-00798 104-00799 104-00800 104-00801 104-00802 104-00803 104-00804 104-00805 104-00806 104-00807 104-00808 114342 5280 5290 69142 69146 691410 6920 6921 6922 4100B 85000222 850002221 904000SP 85000330 8500033002 85000474 850004741 85000440 904000E 900006 85007775 85001175C 8113795 85000340 95000010 85000768 8184958 8184327 900007 85606688 8183061 INCLUDES CONTENTS OF 8114341, PLUS PIN PLATE SYSTEM WITH BALANCER MATE MOBILE STORAGE RACK - 40mm SILENCER BAND - DRUM - 1 3/4" SILENCER BAND - DRUM - 2 3/4" - TRUCK DRUMS CARBIDE INSERT, NEGATIVE RAKE, .032" RADIUS, 2PK., FOR AMMCO LATHES CARBIDE INSERT, NEGATIVE RAKE, .032" RADIUS, 6PK., FOR AMMCO LATHES CARBIDE INSERT, NEGATIVE RAKE, .032" RADIUS, 10PK., FOR AMMCO LATHES SILENCER BAND - VENTILATED ROTOR SILENCER BAND, NON-VENTED - ROTOR - 6.500" (165.10MM) DIAMETER - PACKAGE OF 2 SILENCER BAND, NON-VENTED - ROTOR - 9.250" (234.95MM) DIAMETER - PACKAGE OF 2 MEDIUM DUTY LATHE FOR BRAKE DRUMS AND ROTORS APX-90E COATS TIRE CHANGER - ELECTRIC APX-90A COATS TIRE CHANGER - AIR TURNTABLE 4000B-SP AMMCO BRAKE LATHE 1250-3DV COATS VIDEO BALANCER 220V 1PH 1250-3DV COATS VIDEO BALANCER 220V 3PH APX80E RIM CLAMP TIRE CHANGER APX80A RIM CLAMP TIRE CHANGER WHEEL LIFT SYSTEM FOR 70XX ELECTRONIC CONTROLLED COMBINATION BRAKE LATHE BRAKE LATHE ADAPTER KIT -E775 Coats Wheel Balancer Coats Wheel Balancer 220v 1ph In-Between Cone Set-40mm In-Between Cone Set -28mm Ford F-150 4 x 2 Adapter Coats Grip-Max Laminated Clamps 28 Clamp Kit for COATS X Series Tire Changers 24 COATS X-Out Clamp Kit AMMCO Brake Lathe Adapter kit Pass. Car/LT/Med. Truck Coats ProGuard Leverless Tire Changer PLASTIC DUCK HEAD 1-6 15-4, 15-5 15-5 1-5 1-6 15-7 15-7 15-9 15-9 1-6 15-4 15-4 1-5 15-4, 15-5 15-4 1-5 15-7 15-7 15-4, 15-5 15-4, 15-5 15-7 15-7 15-7
16-37
1-800-ROTUNDA
Item # 104-00809 104-00810 104-00811 104-00812 104-00813 104-00814 104-00815 104-00816 104-00817 104-00818 104-00819 104-00820 104-00821 104-00822 104-00823 104-00824 104-00825 104-00826 104-00827 104-00828 104-00829 104-00830 104-00831 104-00832 104-00833 104-00834 104-00835 104-00836 104-00837 104-00838 104-00839 104-00840 104-00841 104-00842 104-00843 104-00844 105 NU-DI CORPORATION Item # 105-R0110 105-00121 105-00120-RCA FLU77-4 FLU88-D NUD105-R0008 RCA Adapter 105-00120-RCA Model # Description Model # 940420 8182963 8183604 940450 940435 908545 902780 85606545 85606739 80050XAF1 80050XEF1 80050XAH1 80050XEH1 80050XAF2 80050XEF2 80050XAH2 80050XEH2 80050XAF3 80050XEF3 80050XAH3 80050XEH3 80070XAF1 80070XEF1 80070XAH1 80070XEH1 80070XAF2 80070XEF2 80070XAH2 80070XEH2 80070XAF3 80070XEF3 80070XAH3 80070XEH3 9K4000E6E 8114501 8KPPBM40 Description Carbide Inserts (10) Duckhead Bootie CLAMP SOCK (10) Ammco Brake Lathe Tune Up Kit
www.fordrotunda.com
Page # 15-5 15-5
Carbide Inserts For Accturn Brake Lathes DIGITAL DRUM MICROMETER DIGITAL DISC MICROMETER Coats Auxiliary Bead Seater Auxiliary Bead Seater for Coats ProGuard Tire Changer Rim Clamp Tire Changer Air, Foot Bead Lsner, Basic Kit Rim Clamp Tire Changer Elec, Foot Bead Lsner, Basic Kit Rim Clamp Tire Changer Air, Hand Bead Lsner, Basic Kit Rim Clamp Tire Changer Elec, Hand Bead Lsner, Basic Kit Rim Clamp Tire Changer Air, Foot Bead Lsner, Extnd Kit Rim Clamp Tire Changer Elec, Foot Bead Lsner, Extnd Kit Rim Clamp Tire Changer Air, Hand Bead Lsner, Extnd Kit Rim Clamp Tire Changer Elec, Hand Bead Lsner, Extnd Kit Rim Clamp Tire Changer Air, Foot Bead Lsner, Prem Kit Rim Clamp Tire Changer Elec, Foot Bead Lsner, Prem Kit Rim Clamp Tire Changer Air, Hand Bead Lsner, Prem Kit Rim Clamp Tire Changer Elec, Hand Bead Lsner, Prem Kit Rim Clamp Tire Chngr w/Robo, Air, Foot Bd Lsnr, Basic Kit Rim Clamp Tire Chngr w/Robo,Elec, Foot Bd Lsnr, Basic Kit Rim Clamp Tire Chngr w/Robo,Air, Hand Bd Lsnr, Basic Kit Rim Clamp Tire Chngr w/Robo,Elec, Hand Bd Lsnr, Basic Kit Rim Clamp Tire Chngr w/Robo,Air, Foot Bd Lsnr, Extd Kit Rim Clamp Tire Chngr w/Robo,Elec, Foot Bd Lsnr, Extd Kit Rim Clamp Tire Chngr w/Robo,Air, Hand Bd Lsnr, Extd Kit Rim Clamp Tire Chngr w/Robo,Elec, Hand Bd Lsnr, Extd Kit Rim Clamp Tire Chngr w/Robo,Air, Foot Bd Lsnr, Prem Kit Rim Clamp Tire Chngr w/Robo,Elec, Foot Bd Lsnr, Prem Kit Rim Clamp Tire Chngr w/Robo,Air, Hand Bd Lsnr, Prem Kit Rim Clamp Tire Chngr w/Robo,Elec, Hand Bd Lsnr, Prem Kit Ammco 4000E Electronic Brake Lathe & Adpater E Kit Balancer Mate Storage Cart for Coats Wheel Balancers Coats Pin Plate Adapter System with Balancer Mate Cart Page # 14-4 15-4 15-4 15-4 15-4 1-6
ABS ACTIVE WHL SPD SENSOR TESTER 3.5mm Female to Dual RCA Plug Male Adapter - SYNC Gen II AdapterMulti-Media Interface Tester with RCA Adapter FLUKE IV AUTOMOTIVE METER FLUKE 88-5A AUTOMOTIVE METER AIRBAG SIMULATOR, ORANGE BOOT
16-38
1-800-ROTUNDA
Item # NUD105-R0009 NUD105-R0013 NUD105-R025D NUD105-R0080 NUD105-R0107 NUD105-R0108 NUD105-R0109 NUD420-167 NUD420-221 107 WRIGHT TOOL Item # 107-01811 107-01812 107-01814 107-01816 107-02000 107-02001 107-02353 107-02400 107-02457 107-02601 107-02602 107-02605 107-02610 107-02612 107-02654 107-02657 107-02658 107-02659 107-02660 107-02661 107-02662 107-02663 107-02664 107-02665 108 BALCRANK Item # 108-00038 108-00039 108-00041 108-00046 108-00054 108-00062 108-00070 108-00090 Model # 3120-012 3120-010 3120-011 3120-016 5310-018 3330-008 3331-001 3340-009 Description FLUID SOLENOID VALVE 24V Y-STRAINER AIR SOLENOID METER, IMPULSE QRTS Z-SWIVEL 1/4" X 1/4"NPT (1X3) METERED HANDLE, QT Model # 36133512 25753501 26301003 36134023 7461 7500 BEQ0397 H2104070 5400YE URS500 URS900 UR500VAC UG4000DV COMBO455S 7400 1613 1689BLK 1645 1647 1632 1634 1620 1686 J2791 Description AUTO REEL 40FT INCAN 35FT AUTO REEL POWER SUPPLY REEL 30FT SINGLE 40FT FLOUR REEL WITH SWITCH PEDESTAL EYE WASH STATION PORTABLE EYE WASHES ABS & BRAKE PRESSURE TEST KITVIBRATION TACHOMETER POLY SPILL PALLET SQUARE UNIT AUTOMATIC SOLVENT RECYCLER SOLVENT RECYCLER, 6.6 GAL 2 MAN DUST COVER 2 GUN WASHER SPRAY GUNS/SOLVENT RECYCLER Branick 7400 STRUT COMPRESSOR DRUM BOGIE Model # Description
www.fordrotunda.com
Page # 14-7 14-7 14-7 14-7 14-4 14-4 14-4 14-4 14-4 Page #
AIRBAG SIMULATOR, YELLOW BOOT AIRBAG SIMULATOR, RED BOOT PRESSURE SWITCH SIMULATOR PRESSUE SWITCH 104 BREAK OUT BOX ADAPTER 122 PIN 104 BREAK OUT ADAPTER FOR 150 PIN PTEC 104 BRIEAK OUT ADAPTER KIT 150 PIN HD OBD II BREAK OUT BOX RELAY SHOOTING PLUG KIT
RAMP FOR WORK STATIONS/SPILL PALLETS 4 DRUM LOW PROFILE SPILL CONTAINMENT PALLET 4 DRUM IN-LINE SPILL CONTAINMENT PALLET 2 DRUM MODULAR SPILL PLATFORM 4 DRUM MODULAR SPILL PALLET 2 DRUM SPILL PALLET 6 DRUM LOW PROFILE SPILL CONTAINMENT PLATFORM D440A Refrigerant Gas Leak Detector Page #
CTRL HDLE, PRESET MECH MTR RIGID EXT. TIRE INFLATOR W/GUAGE, 1/4 NPT 300PSI
16-39
1-800-ROTUNDA
Item # 108-00092 108-00095 108-00097 108-00126 108-00130 108-00250 108-00252 108-00253 108-00254 108-00255 108-00256 108-00260 108-00399 108-00400 108-00402 108-00403 108-00411 108-00423 108-00431 108-00432 108-00433 108-00434 108-00632 108-00633 108-00661 108-00759 108-00816 108-00959 108-01009 108-01036 108-01039 108-01046 108-01077 108-01081 108-01153 108-01154 108-01155 108-01161 108-01175 108-02003 108-02026 108-02027 108-02056 108-02061 108-02064 Model # 3340-006 3270-003 3120-007 2120-014 2120-013 2230-002 2230-004 2230-005 2230-006 2230-007 2230-008 2230-001 2230-013 3260-028 3260-030 3260-031 3260-039 3260-046 3260-054 3260-055 3260-056 3260-057 4140-003 4140-004 4310-003 4111-002 1131-004 4410-019 4520-001 2220-010 2220-008 4520-002 3320-001 3320-003 2230-003 1131-005 3230-001 3260-058 4140-015 4110-010 3260-035 3260-036 4110-002 2120-007 2220-001 Description AIR CHUCK, 1/4"NPT AIR COUPLER METER, IMPULSE, QUART REEL FOR AIR/WATER 3/8"X 30' REEL, SIGNATURE, OIL 1/2"X 50' MOUNTING BRACKET CHANNEL, 2 REELS CHANNEL, 3 REELS CHANNEL, 4 REELS CHANNEL, 5 REELS CHANNEL, 6 REELS CABINET END PANELS, 2 PCS I-BEAM ADAPTER REGULATOR, MINI REGULATOR, 3/8 REGULATOR, 1/2 FILTER, 1/4 LUBRICATOR, 1/2 F-R-L, 1/4 F-R-L, 3/8 F-R-L, 1/2 F-R-L, 3/4 COUPLER NIPPLE DOLLY BASE/WIDE TRACK 120LB OIL DRAIN ADAPTER PUMP
www.fordrotunda.com
Page #
ACCESSORY KIT, 1" DIAPHRAGM PUMP SENSOR/LEVEL REEL, ENCLOSED SIGN, AIR/WATER 3/8"X 30' REEL, ENCLOSED SIGN, OIL 1/2"X 30' SENSOR/LEVEL CTRL HNDL, NON-MTR, RIGID CTRL HNDL, NON-MTR, GEAR OIL CHANNEL PUMP , OUTFIT, TIGER 5:1 SHUTOFF VALVE AUTOMATIC MOISTURE DRAIN KIT, EVAC, USED OIL 1" DIAPHRAGM PUMP HEAVY DUTY DRAIN, TOP PORT, 16 GAL FILTER/REGULATOR 1-PC COMBO, 3/8 FILTER/REGULATOR 1-PC COMBO, 1/2 OIL WASTER DRAIN REEL, SIGNATURE, HP , 3/8" X 50' REEL, ENCLOSED SIGN, HP 1/4"X 30' 6-7 6-7
16-40
1-800-ROTUNDA
Item # 108-02068 108-02069 108-02072 108-02073 108-02074 108-02075 108-02076 108-02082 108-02083 108-02084 108-02086 108-02087 108-02088 108-02089 108-02093 108-02094 108-02095 108-02099 108-02102 108-02105 108-02108 108-02110 108-02111 108-02112 108-02113 108-02115 108-02119 108-02120 108-02121 108-02122 108-02123 108-02124 108-02125 108-02126 108-02140 108-02144 108-02145 108-02146 108-02149 108-02150 108-02151 108-02152 108-02154 Model # 3270-004 3270-005 8141-002 8241-002 8332-002 8249-002 4410-014 3110-006P 3120-030 3120-035 3120-034 3120-031 3120-033 3120-032 4110-017 4110-023 4110-012 4110-022 1120-015 4410-027 5400-003 1121-009 1151-003 1151-009 1151-011 1300-018 2120-015 2120-020 3110-008 3110-009 3310-009 3310-010 3310-025 3320-007 3331-014 1130-016 1131-008 1131-010 4411-009 1130-020 3110-011 1130-019 4140-024 Description AIR NIPPLE AIR NIPPLE AIR WATER CONNECTING HOSE OIL CONNECTING HOSE 2 CONNECTING HOSE HOSE, MP 1/2 X ACCESSORY KIT, GIANT JET PUMP
www.fordrotunda.com
Page #
PREPROGRAMMED SPECTRUM 100 FIC CONSOLE SMART CONTROLLER, SPECTRUM 50/100 TICKET PRINTER, SPECTRUM 100 UNIVERSAL IMPULSE METER, SPECTRUM 50/100 READY LIGHT, 24VDC OR 24VAC AIR SOLENOID VALVE, 24VDC FLUID SOLENOID VALVE, 24VDC PREMIUM DUTY DRAIN, 23-GAL CAP - ANTIFREEZE ROUGHNECK DRAIN - PRESSURIZED ANTIFREEZE PREMIUM DUTY DRAIN, 23-GAL CAPACITY ROUGHNECK DRAIN - PRESSURIZED 1 DIAPHRAGM PUMP DRUM MOUNT PUMP KIT, PANTHER PUMP BEARING PACKER ALUMINUM ANTIFREEZE/WINDSHIELD WASH DISPENSE OUTFIT PANTHER 50:1 25-35 LB OUTFIT PANTHER 50:1 GREASE INDUCTOR PANTHER 50:1 GREASE INDUCTOR WITH LOW LEVEL SHUTOFF GEAR LUBE HAND PUMP WITH BAND DOLLY SIGNATURE LP AIR/WATER REEL 3/8" X 50' SIGNATURE LP AIR/WATER REEL 1/2" X 50' DIRECTOR JR FLUID INVENTORY CONTROL CONSOLE PUMP SENTINEL PREMIUM SERIES BOOSTER GREASE HANDLE WITH SWIVEL PREMIUM SERIES GREASE HANDLE WITH SWIVEL CONTROL HANDLE GREASE W/18" HOSE EXT. CTRL HNDL, NON-MTR, LOCKING W/FLEX EXT. CTRL HDLE, PRESET ELEC MTR RIGID EXT. PANTHER 5:1 OIL PUMP PANTHER 5:1 WALL MOUNT OUTFIT PANTHER 5:1 DRUM MOUNT OUTFIT UNIVERSAL BUNG ADAPTER PANTHER HP 3:1 STUB PUMP WITH BUNG ADAPTER SPECTRUM 1000 CONSOLES 5:1 STUB PUMP AIR OPERATED OIL EVACUATOR 6-7 6-7 6-7 6-7
16-41
1-800-ROTUNDA
Item # 108-02156 108-02157 108-02159 108-02160 108-02161 108-02162 108-02163 108-02166 108-02167 108-02168 108-02169 108-02170 128 CHIEF AUTOMOTIVE Item # 128-00750 128-00757 128-00758 128-00759 128-00760 128-00761 128-00762 128-00763 128-00764 128-00766 128-00767 128-00768 128-00769 128-00771 128-00784 128-00785 128-00786 128-00787 128-00790 128-00791 128-00792 128-00793 128-00794 128-00795 128-00802 128-00803 128-00804 128-00805 128-00816 128-00817 Model # 450003 200033 200030 200043 200050 200051 200052 619181 619182 619184 619185 619186 619187 619189 687000 687001 687002 687003 450436 450437 450438 450430 450431 450432 702210 799225 799811 798440 792024 451000 Description Model # 4310-001 1130-026 1151-005 1210-006 1210-003 1121-011 1121-012 1210-016 1110-007 1110-006 1120-011S 1120-013 Description STEEL DRUM DOLLY
www.fordrotunda.com
Page #
TIGER 5:1 PUMP W/ BUNG ADAPTER AIR OPERATED GREASE OUTFIT DEF 55 Gallon Drum Dispensing System - Electric DEF 275 Gallon IBC Tote Dispensing System - Electric Used Oil Kit w/ 1 Diaphram Pump Used Oil Kit w/ 3/4 Diaphram Pump DEF 55 Gal. Drum Dispensing Sys. w/3-Way Valve - Electric Gear Oil Pump 3:1 TRANSFER LYNX - Balcrank Light Weight Oil Pump LYNX 1:1 Bare Drum Length W/Bung Balcrank Air Operated Diaphragm Pump 1/2 Polypropylene Balcrank Diaphragm Pump 1 Aluminum Adj. 0-35 GPM Page # 4-1 6-8 6-8 6-7 6-7
IMPULSE 80-FOOT TILT CROSSMEMBER F.A.S.T. ANCHORING SYSTEM FAST UPGRADE KIT FAST W/O ADAPTERS ECONO-FAST ECON-FAST UPGRADE ECONO-FAST LESS CLAMPS CHAINING ACCESSORY PACKAGE #1 CHAINING ACCESSORY PACKAGE #2 CLAMPING ACCESSORY PACKAGE #4 CLAMPING ACCESSORY PACKAGE #5 PULLING ACCESSORY PACKAGE #6 FRAME TECH ACCESSORY PACKAGE #7 PULLING ACCESSORY PACKAGE #9 TITAN-360 SERIES 21 TITAN-360 SERIES 22 TITAN-360 SERIES 31 TITAN-360 SERIES 32 E/VHT 18 FOOT 20 SERIES E/VHT 18 FOOT 30 SERIES E/VHT 18 FOOT 40 SERIES E/VHT 20 FOOT 20 SERIES WIDE TRAK E/VHT 20 FOOT 30 SERIES WIDE TRAK E/VHT 20 FOOT 40 SERIES WIDE TRAK ALIGNMENT TRACKING ATTACHMENT PACKAGE CORDLESS VIN SCANNER VERTICAL SURFACE ATTACHMENTS TARGET EXTENSION PACKAGE TARGET WEIGHT ASSEMBLY (EACH SOLD SEPARATELY-PRICE IS FOR 10) GOLIATH SERIES 20, 22' 4-5 4-5 4-5 4-5 4-5 4-4 4-4 4-4 4-4 4-4
16-42
1-800-ROTUNDA
Item # 128-00818 128-00819 128-00820 128-00821 128-00824 128-00828 128-00830 128-00833 128-00834 128-00836 128-00841 128-00842 128-00843 128-00845 128-00846 128-00847 Item # 132-00001 132-00009 132-00010 132-00011 132-00018 132-00019 132-00020 132-00021 132-00022 132-00050 132-00054 132-00055 132-00060 132-00100 132-00105 132-00116 132-00117 132-00119 132-00120 132-00121 132-00122 132-00123 132-90000 Model # 451001 451002 619158 519723 638006 638545 788178B 787074 787071 640000 788541FR 788650FR 788185FR 787070 640150 556001 Model # 7778-P B20-1 B20 B30 GO18 TOKEN WBA UB021 B30-1 0387 85SSA 0789 DT292 8154 WRS100 B45 B45-1 201 OSSB SSVAC 4CODE AGWRS 132 Description GOLIATH SERIES 30, 22' GOLIATH SERIES 40, 22'
www.fordrotunda.com
Page # 4-5 4-5
AUXILIARY PULLING PACKAGE EVHT STRAIGHT-WELL ACCESSORY BOARD SHOP HOPPER WITH PULLING TOWER SHOP HOPPER-COMPLETE W/ CROSSBARS VELOCITY-UPPER BODY BAR PACKAGE INTELLI-TAPE INTELLI-TAPE WITH TRAM Ford F-150 Design Based Anchoring System VELOCITY MEASURE SYSTEM WITH PTS LINK VELOCITYMAX VECTOR MEASURE SYSTEM WITH PTS LINK Intelli-Tram Assembly Only FORD F-150 CAB-ON REPAIR SYSTEM EZ Liner Express Repair System Description AUTOMATIC CAR POLISHER MOTOR STARTER PANEL ALL CLOTH CAR DRIER 20HP ALL CLOTH CAR DRIER 30HP STOP & GO LIGHT ASSEMBLY TOKEN BOX ENTRY SYSTEM WATER BOOSTER FOR LOW PRESSURE UNDER BODY WASH MOTOR STARTER PANEL ROLLOVER CAR WASH DI/BO RINSE ARCH ASSEMBLY ROLLOVER CARWASH WITH RETRACT STATIONARY DRIVE-THRU CAR WASH REVERSE OSMOSIS SPOT FREE SYSTEM 80/90 PERCENT WATER RECLAIM SYSTEM 45HP CAR DRIER MOTOR STARTER PANEL TOUCH FREE CAR WASH HIGH PRESSURE SIDE BLASTERS 3 MOTOR STAINLESS STEEL SINGLE OR DUAL PORT VACUUM. Carwash 4 Code Box Entry System Above Ground Water Reclaim System Broadway Custom Order 13-1 13-3 13-1 13-1 13-2 13-1 13-1 13-3 13-1 13-2 13-3 13-3 13-2 13-2 4-1 4-4 Page # 13-1 13-2 13-2 13-2 13-1 4-2 4-3 4-2 4-2
16-43
1-800-ROTUNDA
www.fordrotunda.com
138 ROTARY LIFT Item # 138-00085 138-00086 138-00089 138-00130 138-00169 138-00170 138-00174 138-00175 138-00211 138-00403 138-00404 138-00421 138-00527 138-00533 138-00535 138-04229 138-04230 138-04249 138-04250 138-04251 138-04252 138-04264 138-04273 138-04292 138-04293 138-04298 138-04299 138-04301 138-04310 138-04313 138-04352 138-04355 138-04356 138-04361 138-04362 138-04365 138-04368 138-04369 138-04372 138-04373 138-04374 138-04377 138-04378 138-04380 Model # FJ6115 FJ6138 FJ6139 FJ6100 SPO15LC SPO15 SPO18 SPO18LC SM101 FA5911 FJ6137 FC5247 FC134-17 FC5760 FC5710 RJ6000 RJ6000-R S15I S15I-LC S18I S18I-LC SL212I SL212 SPOA10 SPOA10EH2 SPO10 SPO10EH2 S10IBEH2 ADD RISE OPTION RJ9001 SPOA10EH1 SPO10EH1 SPO10EH4 N823 FA5191 SJ6000 S100006 FJ6190 A10I-RA SPOA10-RA FJ6197 VLXS7 VLXS10 SM18 Description EXTENDED HEIGHT ADAPTER RUBBER PAD ADAPTER SET RUBBER PAD ADAPTER SET ADJUSTABLE SCREW-UP ADAPTERS SYSTEM OH 15000 LIFT SYSTEM OH 15000 LIFT 18,000LB SURFACE MOUNT LIFT SYSTEM OH 18000 LIFT LIMOUSINE LIFT 4/P A/G POWERSTATION MINI-VAN ADAPTER SET 8'OIL DRAIN HS QUICK CONNECT PORTABLE WORK STE INTERNAL AIRLINE RETROFIT ROLLING JACK 15000LB 6000# ROLLING JACK FOR 123 LIFT ROLLING JACK 6000LB IN BAY SYSTEM OH 15000 LIFT IN BAY SYSTEM OH 15000 LIFT IN BAY 18000LB SURFACE M IN BAY 18000LB SURFACE MOUNT LIFT 12,000# IN-GROUND SMALLARTLIFT 12000 LBS I/G SMART LIFT 10000LB ASYM LIFT 10000LB ASYM LIFT 2FT EXTENSION 10000LB SYMMETRIC LIFT 10000LB SYMMETRIC LIFT 2FT EXTENSION 10000LB SYM IN BAY BASIC EH2 ADDITIONAL RISE FOR STANDARD HT LIFTS 9000LB ROLLING JACK 10000LB SYM LIFT 1FT EXTENSION HT 10000LB SYMMETRIC LIFT 1FT EXTENSION 10000LB SYM LIFT 4FT EXTENSION HT IN-BAY LIFT DOOR DEFENDER TOOL HOLDER 6000 LB SWING AIR JACK EXTENDED LENGTH DRIVE-THRU RAMP 4 SET ADD-ON POLYMER 1IN ADAPT LIFT 10000 LB DUAL CONTROL THREE STAGE ARMS LIFT 10000 LB THREE STAGE ARMS SET OF FOUR AUXILIARY VEHICLE LIFT ADAPTERS VEHICLE LIFT LOW RISE 7000 LB VEHICLE LIFT LOW RISE 10000 LB 18,000 LB. DRIVE-ON LIFT, 194" WHEEL BASE 8-8 8-7 8-7 8-1 8-2 8-2 8-1 8-7 8-2 8-6 8-5, 8-6 8-2 8-2 8-2 8-7 8-7 8-7 8-2 8-2 Page # 8-1 8-1
16-44
1-800-ROTUNDA
Item # 138-04381 138-04383 138-04384 138-04385 138-04387 138-04388 138-04389 138-04399 138-04400 Model # SM18-EL2 FA5910 FA915 FA916 FC5967 FJ6195 FJ7880 SL210-F SL210I-F Description
www.fordrotunda.com
Page # 8-8
18,000 LB. DRIVE-ON LIFT, 230" WHEEL BASE AIR/ELECTRIC BOX FOR 2-POST LIFTS, NO FILTER/REGULATOR AIR/ELECTRIC BOX FOR 4-POST LIFTS, INCLUDES FILTER/ REGULATOR AIR/ELECTRIC BOX FOR 4-POST LIFTS, NO FILTER/REGULATOR OIL DRAIN PAN FOR 4-POST LIFTS, 30-GALLON EXTENDED HEIGHT ADAPTERS FOR FRAME-CONTACT LIFTS, 17" ALUMINUM EXTENSION KIT FOR RA LIFTS SMARTLIFT 10,000 LB. FINISHING KIT - ARMS & POWER UNIT ONLY FOR ROTARY SL210/ROTUNDA 138-04274 SMARTLIFT 10,000 LB. INBAY FINISHING KIT- ARMS & POWER UNIT ONLY FOR ROTARY SL210I/ROTUNDA 138-04275 SMARTLIFT 10,000 LB. 3-STG ARMS, FINISHING KIT- ARMS & POWER UNIT ONLY FOR ROTARY SL210-RA/ROTUNDA 13804376 SMARTLIFT 10,000 LB. 3-STG ARMS, INBAY, FINISHING KIT-
8-7
138-04401
SL210-RA-F
138-04402
SL210I-RA-F
ARMS & POWER UNIT ONLY FOR ROTARY SL210I-RA/ROTUNDA 138-04375 SMARTLIFT 12,000 LB. FINISHING KIT- ARMS & POWER UNIT ONLY FOR ROTARY SL212/ROTUNDA 138-04273 SMARTLIFT 12,000 LB. INBAY FINISHING KIT- ARMS & POWER UNIT ONLY FOR ROTARY SL212I/ROTUNDA 138-04264 10,000 LB. IN-GROUND LIFT BASE UNIT ONLY FOR ROTARY SL210/ROTUNDA 138-04274 FUTURE KIT FOR SMARTLIFT - ALL UNIVERSAL CAB HOLD DOWN STRAP 14,000 LB DRIVE ON LIFT, CLOSED FRONT, 158 INCH MAX WHL BASE 14,000LB DRIVE ON LIFT, CLOSED FRONT, 192 INCH MAX WHEEL BASE 14,000 LB DRIVE ON LIFT, CLOSED FRONT, 212 INCH MAX WHEEL BASE 14,000 LB DRIVE ON LIFT, OPEN FRONT, 158 INCH MAX WHEEL BASE 14,000 LB DRIVE ON LIFT, OPEN FRONT, 192 INCH MAX WHEEL BASE 7000 LB ROLLING JACK FOR SM14 AND SMO14 14,000 LB DRIVE ON LIFT, OPEN FRONT, 212 INCH MAX WHEEL BASE 3-STAGE ARM RETROFIT-SPOA10 3-STAGE ARM RETROFIT-SPOA7/SPOA9 10000 LB SYMM. LIFT/INBAY/3-STAGE ARMS 10000LB SYMMETRIC LIFT/3 STAGE ARMS 12000LB. SYMMETRIC LIFT W/ 3 STAGE ARMS 3 STAGE ARM RETRO FOR SL29 LIFTS THREE PHASE POWER OPTION FOR ANY LIFT 8-2 8-2 8-2 8-6 8-1 8-8 8-8 8-8 8-8 8-7, 8-8 8-7 8-8
138-04403 138-04404 138-04407 138-04409 138-04411 138-04413 138-04414 138-04415 138-04416 138-04417 138-04428 138-04429 138-04430 138-04431 138-04434 138-04438 138-04439 138-04441 138-04442
SL212-F SL212I-F SL210BU T110177 FJ5184YL SM14S SM14L SM14EL2 SMO14S SMO14L RJ7000 SMO14EL2 N2224N2225 N2244 S10I-RA SPO10-RA SPO12-RA T100210 TPP
16-45
1-800-ROTUNDA
Item # 138-04443 138-04444 138-04445 138-04446 138-04448 138-04449 138-04450 138-04452 138-04454 138-04455 138-04457 138-04458 138-04459 138-04460 138-04461 138-04462 138-04463 138-04464 138-04465 138-04466 138-04467 138-04468 138-04469 138-04470 138-04471 138-04472 138-04473 138-04476 138-04477 138-04478 138-04479 138-04480 138-04481 138-04482 138-04483 138-04484 138-04485 138-04486 138-04487 138-04488 138-04489 138-04490 138-04491 138-04492 138-04493 138-04494 Model # A10I A10I-EH1 T100239 S10I SL210-MP8 SL210I-MP8 MCH418 M140005 RS18 RS33 S100075 S12i-RA RJ9000-2 FA2259 S12I-RA-EH1 S12I-RA-EH2 SPO12-RA-EH1 SPO12-RA-EH2 SPO12-RA-LC SM30-S SM30-L SM30-EL3 SPO10-RA-EH1 SPO10-RA-EH2 SPO10-RA-EH4 SPOA10-RA-EH1 SPOA10-RA-EH2 QL12-L QL12-EL2-L QL12 QL12-EL2 S100111 S100112 S100104 S100106 120K20 120K21 S100105 SL210I-W SL210IW-RA SL210W SL210W-RA Y12 Y12-EL1 T100271 T100273 Description
www.fordrotunda.com
Page # 8-1, 8-2
10000LB. ASYMMETRIC LIFT/INBAY CONTROLS 10000LB. ASYMMETRIC LIFT/ INBAY/1 FT. HGT. EXTENSION SL210/210i COMPLETION KIT 10000LB SYMMETRIC LIFT/INBAY CONTROLS 8000LB IN-GROUND LIFT W/ MOVEABLE PADS 8000LB IN-GROUND LIFT W/ MOV PADS, INBAY CNTRL 72,000 lb mobile-column truck lift, battery op Frame lifting kit for MCH418 7500 lbs 18000 lb portable jack stand 82 rise 33000 lb portable jack stand 82 rise Drive-thru ramps for SM/SMO14/SM101 lifts 12000 lb. Symmetric Lift Inbay 3-Stage Arms 9000 lb. Rolling Jack for 30000 lb. Lifts Air and Electric Utility Box for 30000 lb. Lifts 12000 lb. 2-post symmetric lift inbay 1 ft hi 12000 lb 2-post symmetric lift inbay 2 ft ext 12000 lb 2-post symmetric lift 1 ft ext ht 12000 lb 2-post symmetric lift 2 ft ext ht 12000 lb 2-post symmetric lift low ceiling 30000 lb drive-on lift 235 max wheel base 30000 lb drive-on lift 271 max wheel base 30000 lb drive-on lift 307 max wheel base 10000 lb 2-post symmetric lift 3-stg arm1' ext ht 10000 lb 2-post symmetric lift 3-stg arm 2' ext ht 10000 lb 2-post symmetric lift 3-stg arm 4' ext ht 10000 lb 2-post asymmetric lift 3-stg arm 1' ext ht 10000 lb 2-post asymmetric lift 3-stg arm 2' ext ht 12000 lb quick-lube lift182 12K Q-Lube lift 206w/ladder 12000 lb quick lube lift182 12000 lb quick-lube lift206 Platform with steps for QL12 lifts Drive-thru kit - Rotary QL12 Front mezzanine for QL12 lift Moveable front mezzanine-QL12 lift Crossover walkway for QL1264 Crossover walkway for QL12 lifts 48 Front Mezz. w/Balcony - QL12 10000lb. Rotary In-Ground SmartLift Wide Inbay Controls 10000lb. Rotary In-Ground SmartLift Wide Inbay w/RA adp 10000 lb. Rotary In-Ground Smart Lift Wide 10000 lb. Rotary In-ground SmartLift Wide wi/RA adapters 12000 lb. Rotary Drive On Y Lift. 179 Max W/Base 12000 lb. Rotary Y Lift Extended Length 189 Max W/Base Adapter Extension Kit for Rotary SmartLift Arms Truck Adapters (4) for Rotary RA SmartLifts
8-2
8-4 8-3, 8-4 8-3, 8-4 8-3, 8-4 8-9 8-9 8-3 8-3
16-46
1-800-ROTUNDA
www.fordrotunda.com
144 NUSTAR Item # 144-00002 144-00003 144-00011 144-00013 144-00050 144-00051 144-00052 144-00053 144-00054 144-00055 144-00056 144-00057 160 GRACO Item # 160-00015 160-00021 160-00024 160-00025 160-00028 160-00029 160-00031 160-00032 160-00034 160-00035 160-00036 160-00038 160-00039 160-00052 160-00053 160-00056 160-00063 160-00064 160-00065 160-00073 160-00076 160-00098 160-00100 160-00101 160-00102 160-00103 160-00104 Model # 224-873 222-073 222-602 223-695 225-272 225-376 225-380 225-384 225-880 225-914 226-012 226-018 226-342 186-472 207-221 215-407 215-481 215-487 218-588 224-700 223-696 225-014 225-728 203-521 203-522 203-523 203-524 Description WASTE OIL SYSTEM 50:1 TOPPER PUMP AIR-OP , DISPENSING PUMP PORTABLE EVACUATION. SYSTEM WASTE OIL RECEIVE OIL DISPENSING SYSTEM PORT. OIL DISPENSER, STAT PORT. OIL DISPENSER, 2-WH PORTABLE AUTOMATIC TRANSMISSION FLUID DISPENSER, M 35# PORTABLE GREASE DISPENSER. 50:1 PORTABLE LUBE CHASSIS 50:1 LUBE CHASSIS, TOPPER UNDER COATER SYSTEM WALL BRACKET THERMAL RELIEF KIT AIR VALVE CABLE 100' SOLENOID VALVE READY KIT EVACUATION SYSTEM WAND KIT 50:1 FIREBALL 5:1 FIRE-BALL, PORTABLE 1 REEL MOUNTING CHANNEL 2 REEL MOUNTING CHANNEL 3 REEL MOUNTING CHANNEL 4 REEL MOUNTING CHANNEL 6-4 Page # 6-3 Model # PP2 NSP185 PP3 319-234 C-100 714030 714062 714070 714050 714046 714020 714644 Description CHAINS (SET) EXTRA DUTY POWER PUSHER NO BATTERIES JUMPER CABLES 8' MARINE BATTERIES MFC CART WHEEL LIFT, FOR MFC CART LIFTING CRANE, FOR MFC CART UTILITY TABLE, FOR MFC CART BALL HITCH FOR TRAILER SPOILER GUARD FOR MFC CART BUMPER GUARD, FOR MFC CART PUSH PAD, FOR MFC CART 7-18 7-18 7-18 Page #
16-47
1-800-ROTUNDA
Item # 160-00105 160-00106 160-00107 160-00121 160-00141 160-00142 160-00143 160-00144 160-00145 160-00155 160-00156 160-00157 160-00158 160-00160 160-00206 160-00207 160-00263 160-00266 160-00303 160-00308 160-00311 160-00313 160-00315 160-00316 160-00317 160-00320 160-00322 160-00511 160-00513 160-00514 160-00515 160-00517 160-00522 160-00530 160-00531 160-00533 160-00535 160-00538 160-00539 160-00550 160-00572 160-00576 160-00577 160-00579 160-00580 Model # 203-525 203-526 204-741 240-967 218-548 218-549 218-550 218-551 218-552 218-679 218-680 218-681 220-107 220-112 207-738 207-739 240-959 235-532 203-876 207-914 222-051 222-104 225-016 225-094 225-640 225-782 225-931 100-960 104-266 106-148 106-149 108-537 110-149 110-318 150-136 156-789 169-967 169-971 180-685 202-869 208-536 214-847 214-848 217-072 218-316 Description 5 REEL MOUNTING CHANNEL 6 REEL MOUNTING CHANNEL MOUNTING BRACKET REEL, GR., 35', OPEN END PANEL KIT MP INLET HOSE KIT HP INLET HOSE KIT REEL ENCLOSURE KIT END PANEL KIT 1 REEL MTG. CHANNEL 2 REEL MTG. CHANNEL 3 REEL MTG. CHANNEL OIL BAR DISPENSER OIL BAR TAP KIT VALVE, PRESET VALVE, PRESET REEL 2X6 FLUID COMMANDER 5:1UNIVERSALFIREBALL PUMP PUMP , 5:1 1:1 PUMP 1:1 PUMP 400# SUPPLY PUMP 5:1 SUPPLY PUMP 5:1 FIREBALL 55GAL BUNG MT 10:1 SUPPLY PUMP 5:1 SUPPLY PUMP , 275 GAL. AIR GAUGE AIR REGULATOR FILTER FILTER VALVE F-R-L REGULATOR BALL STYLE AIR CHUCK ADAPTER FITTING, QUICK DISCONNECT FITTING, QUICK DISCONNECT WATER BIB/SPIGOT GREASE SHUT-OFF VALVE QUICK AIR COUPLER 1/4" LUBRICATOR LUBRICATOR LUBRICATOR KIT
www.fordrotunda.com
Page #
6-3 6-3
16-48
1-800-ROTUNDA
Item # 160-00603 160-00606 160-00607 160-00750 160-00751 160-00754 160-00760 160-00764 160-00765 160-00770 160-00771 160-00772 160-00787 160-00788 160-00806 160-00807 160-00808 160-00809 160-00817 160-00818 160-00822 160-00824 160-00838 160-00849 160-00853 160-00854 160-00866 160-00867 160-00868 160-00876 160-00877 160-00878 160-00879 160-00880 160-00881 160-00882 160-00883 160-00888 160-00889 160-00890 160-00891 160-00892 160-00897 160-00898 Model # 222-070 222-079 222-082 224-534 D73525 238-866 110-285 219-096 219-097 222-629 222-645 223-448 237-022 237-030 239-301 239-302 113-557 113-558 113-551 113-552 238-618 111-626 106-151 239-706 236-763 225-026 114-017 155-665 156-684 203-857 203-872 204-254 206-405 206-699 206-700 208-390 208-393 220-171 220-969 221-146 222-065 222-087 225-852 226-941 Description HP HOSE KIT UNDER COATER KIT UNDER COATER KIT BULK OIL PACKAGE
www.fordrotunda.com
Page #
DIAPHRAGM PUMP WITH ANTIFREEZE PORT WASTE OIL DRAIN - 25GAL - READY FOR AIR EVAC. DISPENSER VALVE BRACKET INLET HOSE KIT REEL HOSE INLET KIT HOSE DISPENSER CONSOLE HOSE STATION CONSOLE HOSE DISPENSER CONSOLE 350 SERIES HOSE REEL 50' HEAVY DUTY HOSE REEL 16 GALLON USED OIL DRAIN *NOT AIR EVAC*07 cat is incorrect USED OIL RECEIVER SOLENOID CABLE 500' SOLENOID CABLE 1000' HORIZON BASIC KEY PAD HORIZON ENHANCED KEY PAD PULSE METER FOR OILS CHECK VALVE AIR FILTER AUTO DRAIN OIL BAR METER KIT ELECT PULSE METER PORTABLE GREASE DISPENSER INLET FILTER 3/8 SWIVEL 1/2 SWIVEL 55GAL CVR MTD PUMP FOR OIL & A 16GAL FIRE BALL PUMP FOR OIL & 55GAL BUNG MOUNTED PUMP FOR OIL & PAIL LARGEST FIRE BALL PUMP 15GAL FIRE BALL PUMP FOR OIL & 55GAL FIRE BALL PUMP FOR OIL & 1/4SHUT OFF VALVE 3/8SHUT OFF VALVE GEAR OIL DISPENSER DUAL CONTROL VALVE EVACUATION ASSEMBLY SUCTION HOSE/WAND KIT 55GAL CVR MTD PRESIDENT PUMP 275GAL FIRE BALL PUMP FOR OIL 5:1 FIREBALL UNIVERSAL 55GAL FAST-FLO PUMP 6-4 6-3
16-49
1-800-ROTUNDA
Item # 160-00899 160-00900 160-00901 160-00905 160-00908 160-00924 160-00925 160-00926 160-00927 160-00928 160-00933 160-00935 160-00936 160-00941 160-00953 160-00956 160-00957 160-00958 160-00961 160-00968 160-00969 160-00970 160-00971 160-00972 160-00973 160-00981 160-00986 160-00988 160-00995 160-00999 160-01000 160-01001 160-01002 160-01007 160-01008 160-01019 160-01020 160-01021 160-01024 160-01025 160-01027 160-01028 160-01030 160-01031 160-01032 Model # 226-942 226-944 226-945 237-161 238-108 239-949 239-950 239-951 240-416 240-453 106-150 207-755 214-849 225-006 112-196 237-873 237-944 237-932 159-841 241-791 241-792 241-793 241-794 241-795 241-796 111-841 205-712 241-909 243-983 241-633 224-541 243-669 237-160 242-056 242-058 248-632 246-775 248-097 246-904 246-906 248-622 248-623 119-577 246-909 246-780 Description 55GAL FAST-FLOW PUMP UNIVERSAL FAST-FLOW PUMP UNIVERSAL FAST-FLOW PUMP
www.fordrotunda.com
Page #
WINDSHIELD WASHER SUPPLY SYSTEM UNIVERSAL PRESIDENT PUMP NOZZLE ASSEMBLY-RIGID NOZZLE ASSEMBLY-OFFSET NOZZLE ASSEMBLY-FLEXIBLE INLET SWIVEL VALVE REPAIR KIT 3/4" AIR LINE FILTER 3/4 N.P .T. AIR REGULATOR 3/4 AIR LINE LUBRICATOR FIRE BALL DISPENSER WITH CASTER AIR OPERATED PISTOL GREASE GUN KIT KIT KIT ADAPTER 1 REEL MOUNT CHANNEL 2 REEL MOUNT CHANNEL THREE REEL MOUNT CHANNEL FOUR REEL MOUNT CHANNEL FIVE REEL MOUNT CHANNEL SIX REEL MOUNT CHANNEL WASHER-PLAIN AIR REGULATOR FOR BULL DOG PUMP OIL EVACUATION HOSE REEL 1"X30 AIR/WATER REEL 1/2"X50' BULK OIL PACKAGE 5:1 FIREBALL BULK OIL PACKAGE DUAL INLET PUMP WINDSHIELD WASHER PACKAGE 1/4IN GREASE DISPENSING VALVE 3/8IN GREASE VALVE USED COOLANT RECEIVER UNIVERSAL MINI FIRE-BALL 3:1 MINI FIRE BALL PUMP WITH EXTENSION TUBE MINI FIRE BALL 16G COVER MOUNT MINI FIRE BALL 55G COVER MOUNT MINI FIRE BALL BASIC 250 REEL MINI FIRE BALL BASIC 350 REEL ACE OIL DRAIN BARE GREASE PUMP FOR 35# PAIL BARE GREASE PUMP FOR 120# KEG
6-3
6-4
6-3 6-3
6-3
16-50
1-800-ROTUNDA
Item # 160-01033 160-01034 160-01035 160-01036 160-01037 160-01038 160-01039 160-01040 160-01041 160-01042 160-01043 160-01044 160-01045 160-01046 160-01047 160-01048 160-01049 160-01050 160-01051 160-01052 160-01053 160-01054 160-01055 160-01056 160-01057 160-01058 160-01059 160-01060 160-01061 160-01062 160-01063 160-01065 160-01066 160-01067 160-01068 160-01069 160-01070 160-01071 160-01072 160-01073 160-01074 160-01075 160-01076 Model # 246-781 246-910 246-914 246-915 246-916 246-917 248-918 234-902 249-294 253-487 253-486 253-494 249-783 249-771 249-821 232-076 255-350 255-348 255-349 255-802 255-803 255-200 255-351 255-352 255-355 256-836 256-837 255-800 255-801 256-838 256-839 255-354 255-751 256-215 255-277 247-712 247-714 247-713 247-715 247-716 255-356 256-216 HRL56B Description
www.fordrotunda.com
Page #
BARE GREASE PUMP FOR 400$# DRUM PORTABLE PUMP PACKAGE FOR 35# GREASE PAIL 120# STATIONARY PUMP PACKAGE 120# PORTABLE PUMP PACKAGE WITH CASTER BASE 120# PORTABLE PUMP PACKAGE WITH TWO WHEEL CART 400# STATIONARY PUMP PACKAGE HURRICANE PUMP WITH METERED TAPPER HURRICANE PUMP WITH METERED 8' HOSE HURRICANE PUMP WITH METERED 25' HOSE DELUXE PACKAGE WITH CASTER BASE FOR 248-918 PUMP DELUXE PACKAGE WITH CASTER BASE FOR 234-902 PUMP DELUXE PACKAGE WITH CASTER BASE FOR 249-294 PUMP HURRICANE CART WITH 248-918 PUMP HURRICANE CART WITH 234-902 PUMP HURRICANE CART WITH 249-294 PUMP ELECRONIC FLUID COMMANDER SYSTEM Electronic oil meter Electronic ATF meter Electronic gear lube meter Electronic anti-freeze meter Electronic anti-freeze meter Electronic preset oil meter Preset electronic ATF meter Electronic preset dispense meter for gear oil Preset anti-freeze meter High ow electronic oil meter High ow electronic oil meter High ow electronic oil meter High ow electronic oil meter Preset high ow electronic oil meter High ow preset electronic oil meter High ow preset oil meter Electronic oil meter Electronic Oil Meter,1/2" NPT,Rigid Extension Electronic preset oil meter 1/2" Non- meterd oil dispense valve Non metered gear oil valve 1/2" non metered oil dispense valve 1/2' non metered anti-freeze dispense valve 1/2" non metered anti-freeze dispense valve Preset electronic anti-freeze meter Preset electronic oil meter Light Duty Hose Reel Air/Water 3/8 x 65 ft Met. BlueEconomy priced reel with three year warranty. Available in multiple colors. 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4 6-4
16-51
1-800-ROTUNDA
Item # 160-01077 160-01078 160-01079 160-01080 160-01081 160-01082 160-01083 160-01084 160-01085 160-01086 160-01087 160-01088 160-01089 Model # HRL65B HRM65B HRH55B HPL23B HPL25B HPL33B HPL56B HPL65B HPM33B HPM65B HPH15B HPH23B HPH55B Description
www.fordrotunda.com
Page # 6-4 6-4 6-4
Light Duty Hose Reel Air/Water 1/2 x 50 ft Met. Blue.Economy priced reel with three year warranty. Available in multiple colors. Light Duty Hose Reel Oil 1/2 x 50 ft Met. Blue.Economy priced reel with three year warranty. Available in multiple colors. Light Duty Hose Reel Grease 3/8 x 50 ft Met. BlueEconomy priced reel with three year warranty. Available in multiple colors. SD Hose Reel Air/Water 3/8 x 35 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Air/Water 3/8 x 50 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Air/Water 1/2 x 35 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Air/Water 3/8 x 65 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Air/Water 1/2 x 50 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Oil 1/2 x 35 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Oil 1/2 x 50 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Grease 1/4 x 50 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Grease 3/8 x 35 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors SD Hose Reel Grease 3/8 x 50 ft Met. BlueStandard duty hose reel with three year warranty. Avalable in multiple colors XD Hose Reel Air/Water 3/8 x 50 ft Met. BlueExtreme duty hose reel with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Hose Reel Air/Water 1/2 x 35 ft Met. BlueExtreme duty hose
160-01090
HSL25B
160-01091
HSL33B
reel with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Hose Reel Air/Water 3/8 x 65 ft Met. BlueExtreme duty hose
160-01092
HSL56B
reel with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Hose Reel Air/Water 1/2 x 50 ft Met. BlueExtreme duty hose
160-01093
HSL65B
reel with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Hose Reel Oil 1/2 x 35 ft Met. BlueExtreme duty hose reel
160-01094
HSM33B
with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Hose Reel Oil 1/2 x 50 ft Met. BlueExtreme duty hose reel
160-01095
HSM65B
with three year warranty. Reel has dual arm pedestal and is available in multiple colors.
16-52
1-800-ROTUNDA
Item # 160-01096 Model # HSH15B Description
www.fordrotunda.com
Page #
XD Hose Reel Grease 1/4 x 50 ft Met. BlueBlueExtreme duty hose reel with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Hose Reel Grease 3/8 x 50 ft Met. BlueExtreme duty hose 160-01097 160-01098 160-01099 160-01100 160-01101 160-01102 160-01103 160-01104 160-01105 160-01106 160-01107 160-01108 160-01109 160-01110 160-01111 160-01112 160-01113 160-01114 160-01115 160-01116 160-01117 160-01118 160-01119 160-01120 160-01121 160-01122 160-01123 160-01124 160-01125 160-01126 160-01127 160-01128 160-01129 160-01130 160-01131 160-01132 160-01133 160-01134 160-01135 160-01136 HSH55B 24A224 24A934 24A935 24A936 24A937 24A938 24A939 24A219 24A220 24A221 24A222 24A940 24A945 24A950 24A951 119-576 24E166 24E167 HEL13D HEL15D HEL23D HEL25D 24C433 24C444 109-075 110-224 108-458 203-688 191-194 191-288 191-287 24A217 256-634 256-635 256-636 256-637 256-638 257-464 255-731 reel with three year warranty. Reel has dual arm pedestal and is available in multiple colors. XD Retrot Bracket for 500 Series LD/SD Mounting Channel (open) 1 Reel LD/SD Mounting Channel (open) 2 Reels LD/SD Mounting Channel (open) 3 Reels LD/SD Mounting Channel (open) 4 Reels LD/SD Mounting Channel (open) 5 Reels LD/SD Mounting Channel (open) 6 Reels XD Mounting Channel (open) 1 Reel XD Mounting Channel (open) 2 Reels XD Mounting Channel (open) 3 Reels XD Mounting Channel (open) 6 Reels SD Size 10 Enclosure Met BlueAvailable in multiple colors. LD/SD Size 20 Enclosure Met BlueAvailable in multiple colors. SD Enclosure End Panel Size 10Available in multiple colors. LD/SD Enclosure End Panel Size 20Available in multiple colors. Caster Assembly - Graco Oil Drain Used Oil Evacuation System Stationary Gear Oil Extraction System Enclosed air reel with 1/4 X 35' hose Enclosed air reel with 1/4 X 50' hose Enclosed air reel with 3/8 X 35' hose Enclosed air reel with 3/8 X 50' hose Inlet hose kit Inlet hose kit 3/8 air regulator w/gauge - Graco 3/8 bleed type air shut off valve - Graco 2000 PSI ball valve - Graco Low Level Oil Pump Cut Off Valve - Graco Black Swivel Dispensing Valve Protective Cover - Graco Blue Swivel Dispensing Valve Protective Cover - Graco Red Swivel Dispensing Valve Protective Cover - Graco White Graco 20 Series SD Reel Enclosures Graco Matrix Premier Level Software Graco Matrix Professional Level Software Graco Matrix Basic Level Software Graco Matrix Premier Level Software with ADP Interface Graco Matrix Premier Level Software With R & R interface Graco Matrix Component System Transceiver Graco Matrix USB/RS422 Converter 6-3
16-53
1-800-ROTUNDA
Item # 160-01137 160-01138 160-01139 160-01140 160-01141 160-01142 160-01143 160-01144 160-01145 160-01146 160-01147 160-01149 160-01148 160-01152 160-01151 160-01150 160-01153 160-01154 160-01155 162 MIDTRONICS Item # 162-00010 162-00024 162-00026 162-00028 162-00030 162-00031 162-00032 162-00035 162-00036 162-00037 162-00040 162-00041 162-00043 162-00045 162-00046 162-00047 162-00048 162-00049 162-00050 162-00051 Model # A051RTD GR1-193+ GR PRINTER KIT GR1-190H2V3KIT DVP190 A043 A084 A103 GR1-190H2V3 GRUpdate SVC490 GR590 PSC550S-KIT A065 PSC-700 R KIT A271 A261 A114 EXP 890 A125 Description PRINTER & CARRYING CASE GR1 BATTERY TESTER/CHARGER GR PRINTER KIT GR1 CHARGER WITH PRINTER KIT FORD INFRARED SOFTWARE RUBBER BOOT BATTERY TEST CABLES 4FT SOFT CASE Model # 15T999 15T998 256-282 256-482 256-483 256-484 256-485 15T367 15T368 15T369 15B750 15T370 257-539 256-719 255-370 257-556 256-285 247-435 247-436 Description Graco Matrix 15 foot USB cable Graco Matrix 3 foot USB cable
www.fordrotunda.com
Page #
Graco Matrix Meter Handle 1/2 npt(f) with Rigid Extension" Graco Matrix Meter Handle with exible Extension Graco Matrix Meter Handle Gear Lube Extension Graco Matrix Anti-Freeze Meter Handle with Rigid Extension Graco Matrix Meter Handle Anti-Freeze w/Flexible Extension Graco Red Inlet Swivel Cover Graco Blue Swivel Inlet Cover Graco Green Swivel Inlet Cover Graco Drum Cover Mount Bracket Graco Yellow Swivel Inlet Cover Graco Matrix Meter for Oil Bar(no extensn or inlet swivel) Oil Bar Console Only less components Graco Meter Oil Bar Kit Graco Oil Bar Matrix Meter Retro Fit Kit Graco Ultra Sonic TLM Tank Level Monitor Graco 23 SCFM PAC Pump Air Controller Graco 93 SCFM PAC Pump Air Controller Page #
12-1 12-1
GR 190 V3.0 Intelligent Diagnostic Charger Update Kit for GR190 to V3.0 Micro 490/590 V2.0 Upgrade Kit GR 590 V3.0 INTELLIGENT DIAGNOSTIC CHARGER 220V 55 AMP POWER SUPPLY/CHARGER W/ SOFT CARRY CASE GR1 190 Printer Cable 70 amp Power Supply Charger PSC-700 Replacement 10' Cable With Alligator Clamps PSC-700 Replacement 10' Lead With Ring Terminals PSC-550 S Kit Replacement 12' Lead Set EXP 890 Handheld Battery Tester Analyzer w/Printer Protective Boot for EXP890 Battery Tester / Analyzer
12-1
12-2
12-1 12-1
16-54
1-800-ROTUNDA
www.fordrotunda.com
164 HELM Item # 164-R3708 164-R3735 164-R3745 164-R3750 164-R3755 164-R3759 164-R3752 164-R3753 164-R3754 164-R3760 164-R7041 164-R8007 164-R8013 164-R8014 164-R8016 164-R8020 164-R8021 164-R8028 164-R8029 164-R8038 164-R8039 164-R8042 164-R8043 164-R8044 164-R8045 164-R8046 164-R8048 164-R8051 164-R8052 164-R8056 164-R8062 164-R8063 164-R8064 164-R8067 164-R8070 164-R8073 164-R8076 164-R8087 164-R8090 164-R9502 164-R9508 VMM (VEHICLE MEASUREMENT MODULE) Model # Description DYE LITE DIESEL ENGINE OIL DYE-1 OZ BOTTLES24 PK FLUORO LITE R134A/PAG A/C DYE 1/4 OZ BOTTLES CLEAR BLUE Coolant Dye -1 OZ BOTTLES 24/PKG Tracerline Optimax Jr Leak Detection Lamp LED Optimax 3000 LED Leak Detection Flashlight PRO-Alert Electronic Refrigerant Leak Detector Mini EZ Injector Kit For R-134A PAG Dye AC R-134A PAG Dye Cartridges (6 Per Pkg) All In One Oil/Fuel Leak Detection Dye (6) 1-oz Bt PRO-Alert 2791 Electronic Refrigerant Leak Detecto Mercury IKT 4-button w/ 2x Trunk (1) Ford Side-Mill 80 Bit 3B IKT Uncut Key Blank Single Key Ford 4-Button IKT Transponder Single Key Mercury 4-Button IKT Transponder Single Key Ford 3-Button IKT Transponder Ford BOSS 302 80 Bit 4B IKT Key Blank Single Ford BOSS 302 Track 80 Bit 4B IKT Key Blank Single Ford Tibbe Non-Transponder Key Blank (Un-Cut) Ford Tibbe Non-Transponder Key Blank (Cut) Tibbe 'Lollipop' Fork/Blade Key (Cut) Tibbe 'Lollipop' Fork/Blade Key (Uncut) Ford 3-Button 80 Bit Fob Transmitter Side Mill Fork/Blade Un-cut Key (Lollipop) Side Mill Fork/Blade Cut Key (Lollipop) Side Mill 'KV' (back-up) Key Blank (1key/polybag) Ford Side-Mill 80 Bit 4B IKT Uncut Key Blank Ford PEPS 80 Bit Fob (1 Fob/Poly) Ford Logo Key (Uncut) 2010 Transit Connect 40 Bit Ford Logo Key (Cut) 2010 Transit Connect 40 Bit Ti Lincoln 80 Bit 5B IKT Remote Start Key Blank Ford side mill 'Plain' Un-cut 80 Bit Key Blank Ford side mill 'Plain' Cut 80 Bit Key Blank Lincoln 80 Bit 4B IKT Remote Start Key Blank Ford 80 Bit 4B IKT Remote Start Key Blank Ford 80 Bit 3B IKT Key Blank Ford 80 Bit 4B IKT Key Blank Lincoln 80 Bit 3B IKT Key Blank Ford 'Pony' Mustang 80 Bit 4B IKT Key Blank (Sing) Ford 'KV' (Back-up) Cut Key Blank Page # 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 7-17 14-1 14-1
16-55
1-800-ROTUNDA
Item # 164-R9509 164-R9700 164-R9701 164-R9705 178 BETTER ENGINEERING Item # 178-00006 178-00051 178-00052 178-00056 Item # 192-00071 192-00073 192-00074 199 FLO DYNAMICS Item # 199-00014 199-00015 199-00016 199-00018 199-00020 199-00021 199-00022 199-00023 199-00024 199-00025 199-00026 199-00027 199-00028 199-00029 199-00030 199-00031 Model # 941801 941802 941803 941807 941809 941813 941815 941816 941817 941818 941819 941820 941821 941822 941823 941825 Description Model # V200 ATC-48 LWS-F1 SSB-22 Model # SC3990 SC5000 SC5025 Description V-200 PARTS WASHER Model # Description
www.fordrotunda.com
Page # 14-1 14-1 14-1 14-1 Page # 7-19 7-19 7-19 7-19 Page # 7-15
PANSONIC TOUGHBOOK LAPTOP COMPUTER CF-19 IDS ADVANCED PACKAGE IDS STANDARD PACKAGE IDS VCM
ATC-48 DUAL CHANNEL AUTO TIMER LWS-F1 LOW WATER SHUTOFF/AUTO REFILL SSB-22 HAND BRUSH Description NITE DROP ZONE KEY DROP BOX FLEXCART COOL Kit: Cordless Operation On Land for FlexCart
Page #
5/8"-18 [FEMALE] SAE 45 FLARE - SWIVEL (CHRYSLER1993 AND NEWER) 5/8"-18 [MALE] SAE 45 FLARE (CHRYSLER) 5/8"-18 [MALE] SAE 45 FLARE - SWIVEL (GENERAL MOTORS WITH 3/8" TUBE DIAMETER LINES-ALL YEARS) 5/8"-18 [FEMALE] SAE 45 INVERTED (GENERAL MOTORS WITH 3/8 TUBE DIAMETER LINES-1997 AND NEWER) 1/2" DIA. BLUE OPEN END HOSE W/CLAMP [FEMALE] (IMPORT) 5/16" DIA. GREEN OPEN END HOSE W/CLAMP [FEMALE] (IMPORT) 1/4-18 [MALE] NPTF(JEEP CHEROKEE- 1980-1986) 1/2-20 [FEMALE] SAE 45 INVERTED (CHRYSLER, FORD AEROSTAR, JAGUAR, MERCEDES,& CADILLAC-1985 AND NEWER) 1/2-20 [MALE] SAE 45 (CHRYSLER-FORD) 5/8"-18 [MALE] SAE INVERTED - SWIVEL (FORD WITH LARGE NUT ADAPTER- 1980 AND NEWER) 5/8-18 [FEMALE] SAE INVERTED (FORD) 1/2-20 [MALE] SAE 90 INVERTED - SWIVEL (GENERAL MOTORS WITH 5/16" TUBE DIAMETER LINES-ALL YEARS) 1/2-20 [FEMALE] SAE INVERTED (GENERAL MOTORS) 1/2-20 [FEMALE] SAE INVERTED (FORD) 1/2-20 [MALE] SAE 90 INVERTED - SWIVEL (FORD 5/16" SMALL/LONG NUT ADAPTER- 1980 AND NEWER) M14 X 1.5 [FEMALE] SWIVEL O-RING (JEEP CHEROKEE, FORD ESCORT- 1980-1986)
16-56
1-800-ROTUNDA
Item # 199-00032 199-00033 199-00034 199-00035 199-00036 199-00037 199-00038 199-00039 199-00040 199-00041 199-00042 199-00043 199-00044 199-00045 199-00046 199-00047 199-00048 199-00049 199-00050 199-00051 199-00052 199-00054 199-00055 199-00056 199-00057 199-00058 199-00059 199-00060 199-00061 199-00062 Model # 940874 940875 941828 941830 941831 941832 941835 941836 940328 940329 940334 942162 942163 941805 941829 941841 941842 941900 940388 940389 940775 941910 942169 941899 940999 TS410 TS460 Promax 40 PSX2000 PSX2500 Description
www.fordrotunda.com
Page #
M14 [FEMALE] BANJO FITTING (FORD ESCORT- 1994 & NEWER) M14 X 1.5 [MALE] BOLT W/ 2 WASHERS (FORD ESCORT1994 & NEWER) 1/4" [MALE] UNIVERSAL BUMP FITTING (IMPORT) 5/16" [MALE] UNIVERSAL BUMP FITTING (INFINITI, LEXUS, & BMW - 1980 & NEWER) 3/8" [MALE] UNIVERSAL BUMP FITTING (TOYOTA, NISSAN, HONDA, FORD & CHRYSLER- 1975 & NEWER) 1/2" [MALE] UNIVERSAL BUMP FITTING (TOYOTA, NISSAN & HONDA- 1980 & NEWER) 9/16"-18 [MALE] JIC 37 FLARE - INVERTED (DODGE DURANGO/DAKOTA - ALL YEARS) 9/16"-18 [FEMALE] JIC 37 FLARE - SWIVEL (DODGE DURANGO/DAKOTA - ALL YEARS) DODGE QUICK RELEASE ADAPTER 1/2" DODGE QUICK RELEASE ADAPTER 3/8" 5/16 ADAPTER QUICK DISCONNECT TOOL GM ADAPTER 3/8" DIA. RED OPEN END HOSE W/CLAMP [FEMALE] (IMPORT- 1987 AND NEWER) 1/4" DIA. BLACK OPEN END HOSE W/CLAMP [FEMALE] (IMPORT) 3/4"-16 [MALE] SAE O-RING (CHEVY DURAMAX W/ALLISON TRANSMISSION - 2001 & NEWER) 3/4"-16 [FEMALE] SAE O-RING (CHEVY DURAMAX W/ALLISON TRANSMISSION - 2001 & NEWER) ALLISON HOSE KIT 5/8" OPEN END X H3C 2001.5 AND NEWER DODGE 3500 CUMMINS TURBO DODGE 3500 CUMMINS TURBO HOSE KIT (CONSIST OF ABOVE ADAPTERS) FORD ADAPTER FOR F150 AND EXPLORER MEDIUM 5/8" GM 5/8 NIPPLE X FLARED THREAD FOR DURAMAX DIESEL 940775 KIT PLUS THE ABOVE METAL ADAPTERS ATF FLUID EXCHANGER ATF FLUID EXCHANGER W/POWER STEERING FLUID EXCHANGER ATF FLUID EXCHNAGER FOR AUTO & LARGE TRUCKS (INC. ALLISON TRANSMISSIONS) POWER STEERING FLUID EXCHANGER IN PORTABLE BOX POWER STEERING FLUID EXCHANGER WITH CART AND FINGER TIP CONTROL 10-2 10-2 10-2 10-3 10-3
16-57
1-800-ROTUNDA
Item # 199-00063 199-00064 199-00065 199-00066 199-00067 199-00068 199-00069 199-00070 199-00071 199-00072 199-00073 199-00074 Item # 201-00062 201-00069 201-00070 201-00071 201-00072 201-00073 201-00074 201-00075 201-00076 201-00077 201-00078 201-00079 201-00080 201-00081 201-00082 201-00083 201-00084 201-00085 201-00086 201-00087 201-00088 201-00089 201-00090 201-00091 201-00092 201-00093 201-00094 Model # PSX3000 TSD450 TSD650 CVAC3 CCST388 CCST288 DK300 FR200 03062-2 FK310 940796A FRM800 Model # 50046 PFM9.2-DRO-5 PFM9.2-DRO-2 50-683 50-687 50-688 50-239 50-695 50-497 50-499 50-179 30-700B 50-702 50-708 30-791 50-663 50-935 50-691R-7 50-031 50-492K 50-694 50-380 A-10 WartHog 50-390UPG 50-495K 50-495 50-492 Description
www.fordrotunda.com
Page # 10-3 10-2
POWER STEERING FLUID EXCHANGER IN ROLL AROUND CABINET W/FINGER TIP CONTROL ATF X-CHANGER W/ DIPSTICK MODE ATF X-CHANGER W/ DIPSTICK MODE AND DUAL NEW FLUID TANKS. COOLANT EXCHANGE MACHINE A/C SERVICE MACHINE WITH PRINTER A/C SERVICE MACHINE AUTOMATIC DYE INJECTOR KIT 2-PACK OF REPLACEMENT FILTERS Instant Fluid Diagnostic Kit for ATF AC ush kit Replacement Canister Filter for ATF X-Changer Evac-U-Max Description NOSE CONE EXTENSION PFM-92F ON CAR BRAKE LATHE PACKAGE W/ DRO-5 ADAPTERS PFM-92F ON CAR BRAKE LATHE PACKAGE W/ DRO-2 ADAPTERS TRUCK ADAPTER/4X4 HD/OFF 4 HOLE DIRECT FIT 5 HOLE DIRECT FIT FORD CUTTING HEAD DODGE DAKOTA ADAPTER REACH EXT PLATE SLIDE PLATE NUT & BOLT KIT DIAL INDICATOR CHIPTRAY ASSEMBLY(PLASTIC FLEXBAR DIAL INDICATR ARM SPACER FOR FORD/GM/DODGE RUN OUT ADJUSTMENT SCREWS DUAL WHEEL ADAPTER MODEL 2000 TRUCK ADAPTER LEAD SCREW W/SCREW BLOCK Dual-Wheel Extension Kit High Hat Truck Adapter - Pro-Cut OCL Non Adjustable Trolley Pro-Cut WartHog On Car Lathe Hvy Dty Rotor Matching System 50-390 OCL Trolley Upgrade with PFM9.2 New Purchase Only 50-495K OCL Reach Extension Kit Dual Wheel - ProCut 50-495 OCL Reach Extension Plate Dual Wheel for PFM9.0 50-492 OCL Reach Extension Plate for Spd Lock Slide Plate
1-2 1-2
1-2
16-58
1-800-ROTUNDA
Item # 201-00095 201-00096 201-00097 201-00098 201-00099 201-00100 203 NSS ENTERPRISES Item # 203-00002 203-00025 203-00026 203-00027 203-00028 203-00029 203-00030 203-00031 203-00032 203-00108 203-00109 203-00120 203-00121 203-00122 203-00124 203-00130 203-00141 203-00142 203-00145 203-00147 203-00149 203-00151 203-00152 203-00154 203-00155 203-00156 203-00157 204 BORROUGHS Item # 204-00001 204-00002 204-00003 204-00004 204-00005 204-00006 204-00007 204-00008 Model # FB101 FB102 FB103 FB104 FB105 FB106 FB107 PBF-12-84 Description FLEX BIN FLEX BIN FLEX BIN FLEX BIN FLEX BIN FLEX BIN FLEX BIN BIN FRAME Model # 2602656 2892201 2892711 2694511 2694521 2792511 2792521 3390511 3390521 0800808 3098309 4001010 4001008 6306302 4704722 7602904 2307014 7691511 2708204 3302204 7107102 7603542 7693541 2708268 2792901 3302278 3390901 Description FLOOR SCRUBBER-26 SCRUB BRUSH SCRUB BRUSH SCRUB BRUSH SCRUB BRUSH SCRUB BRUSH SCRUB BRUSH SCRUB BRUSH SCRUB BRUSH WET/DRY VACUUM TOOL KIT CAR DETAILING EXTRACTOR COLD WATER EXTRACTOR Model # 50-246 50-049 50-035 50-009 50-007 50-005 Description
www.fordrotunda.com
Page #
50-246 OCL Small Spacer Ring - Procut 50-049 OCL Double Thick Nose Cone Extension - ProCut 50-035 OCL Extended Feed Screw Dual Wheel - ProCut 50-009 OCL 8 Lug Stand Offs 14mmx2 Black Color - ProCut 50-007 OCL 10 Lug Stand Offs 9/16x18 Silver Color- ProCut 50-005 OCL 10 Lug Stand Offs 14mmx1.5 Olive Color - ProCut Page # 5-1
SIDEWINDER 27 MECHANICAL SWEEPER AERO PLUS 3 SPEED DRYER CHAMP ZS29 325AMP WRANGLER 2016 AUTO SCRUBBER 15" NYLON SCRUB BRUSH WRANGLER 2730DB WRANGLER 330DB Pacer 112 12 Vacuum Cleaner NSS Champ 3529 18 Scrub Grit Brush - 2 required NSS Wrangler 2730 complete with batteries 14 Scrub Grit Brush - 2 required NSS Wrangler 3330 complete with batteries 17 Scrub grit brush - 2 required Page # 5-1 5-1
16-59
1-800-ROTUNDA
Item # 204-00009 204-00010 204-00011 204-00012 204-00013 204-00014 204-00019 204-00021 204-00022 204-00023 204-00024 204-00025 204-00026 204-00027 204-00028 204-00029 204-00030 204-00031 204-00032 204-00033 204-00034 204-00035 204-00036 204-00037 204-00038 204-00039 204-00040 204-00041 204-00042 204-00043 204-00045 204-00046 204-00047 204-00049 204-00050 204-00051 204-00052 204-00053 204-00054 204-00055 204-00056 204-00057 204-00058 204-00059 204-00060 Model # PBF-12-96 02720-099 14066-001 14066-002 14066-003 04432-099 02718-099 09221-099 1016-3 1017-3 1018-3 1019-3 1016-4 1017-4 1018-4 1019-4 3016-3 3017-3 3018-3 3019-3 3016-4 3017-4 3018-4 10430-001 10432-001 10430-003 10432-003 09534-095 09534-094 05020-815 13828-000 05165-815 09556-097 14745-006 14745-007 09554-097 09554-095 BSR1-7236 BSR1+7236 BSR2-7236 BSR2+7236 BSR3-7236 BSR3+7236 BSR4-7236 BSR4+7236 Description BIN FRAME FLEXI-BIN SHELF SLIDING SHELF DIVIDER SLIDING SHELF DIVIDER SLIDING SHELF DIVIDER DRAWER BIN BASE BIN SIDE (96) SHELVING STARTER UNIT SHELVING ADD-ON UNIT SHELVING START UNIT SHELVING ADD-ON UNIT SHELVING START UNIT SHELVING ADD-ON UNIT SHELVING START UNIT SHELVING ADD-ON UNIT SHELVING START UNIT SHELVING ADD-ON UNIT SHELVING START UNIT SHELVING ADD-ON UNIT SHELVING START UNIT SHELVING ADD-ON UNIT SHELVING START UNIT P2 SHELF P2 SHELF P2 SHELF P2 SHELF ANGLE POST ANGLE POST SIDE BRACING 18 BACK BRACING 36IN BACK BRACING 48 LABEL HOLDER (36) SLIDING DIVIDER SLIDING DIVIDER BASE STRIP (36) BASE STRIP (48) BULKY PARTS RACK BULKY PARTS RACK BUMPER & BARS RACK BUMPER & BARS RACK FENDERS & DOORS RACK FENDERS & DOORS RACK FENDER RACK SHEET METAL RACK/TWO TIER
www.fordrotunda.com
Page #
9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3
16-60
1-800-ROTUNDA
Item # 204-00061 204-00062 204-00063 204-00064 204-00065 204-00066 204-00067 204-00068 204-00069 204-00070 204-00071 204-00072 204-00073 204-00074 204-00075 204-00076 204-00077 204-00078 204-00079 204-00080 204-00081 204-00082 204-00084 204-00085 204-00086 204-00087 204-00088 204-00089 204-00090 204-00091 204-00092 204-00093 204-00094 204-00095 204-00096 204-00101 204-00102 204-00103 204-00104 204-00105 204-00106 204-00113 204-00114 204-00115 204-00116 Model # BSR5-9636 BSR5+9636 BSR6-4848 BSR6+4848 B60SETB37 B60SETB40 B60SETB52 B60DETB37 B60DETB40 B60DETB52 BMR1+4860 BMR2+4860 BMR3+4860 BMR4+4860 BMR5-9648 10061-001 10061-002 10061-004 10132-001 10132-002 10132-004 10103-000 10068-003 10068-005 10068-007 10068-008 10068-010 10068-011 10070-011 10072-003 10072-005 10072-007 14150-001 10118-000 10460-000 B6930DH36 B6930DH47 B6930DLH59 B6924DR36 B694DR47 B6924DR59 SA225-10 SA225-12 SA312-10 SA312-12 Description SHEET METAL RACK/HANGING SHEET METAL RACK/HANGING SHEET METAL RACK/HOODS SHEET METAL RACK/HOODS SINGLE ENTRY TIRE RACK 3 LEVEL SINGLE ENTRY TIRE RACK 4 LEVEL SINGLE ENTRY TIRE RACK 5 LEVEL DOUBLE ENTRY TIRE RACK 3 LEVEL DOUBLE ENTRY TIRE RACK 4 LEVEL DOUBLE ENTRY TIRE RACK 5 LEVEL MOLDING RACK MOLDING RACK MOLDING RACK MOLDING RACK MOLDING RACK RIVET SPAN STANDARD POST 84 RIVET SPAN STANDARD POST 96 RIVET SPAN STANDARD POST 120 RIVET SPAN T POST 84 RIVET SPAN T POST 96 RIVET SPAN T POST 120 FOOTPLATE DR ANGLE BEAM 24 DR ANGLE BEAM 36 DR ANGLE BEAM 48 DR ANGLE BEAM 60 DR ANGLE BEAM 72 DR ANGLE BEAM 96 CHANNEL BEAM 96 SUPPORT TIE 24 SUPPORT TIE 36 SUPPORT TIE 48 DIVIDER ARM 24 LOOP DIVIDER BAR 26X15 MAGNETIC LABEL HOLDER ARCHIVE RECORDS UNITS ARCHIVE RECORDS UNITS ARCHIVE RECORDS UNITS ARCHIVE RECORDS UNITS ARCHIVE RECORDS UNITS ARCHIVE RECORDS UNITS SLOTTED ANGLE SLOTTED ANGLE SLOTTED ANGLE SLOTTED ANGLE
www.fordrotunda.com
Page # 9-2 9-2 9-2 9-2 9-2 9-2 9-2 9-2
16-61
1-800-ROTUNDA
Item # 204-00117 204-00118 204-00119 204-00120 204-00121 204-00122 204-00123 204-00124 204-00125 204-00126 204-00127 204-00128 204-00129 204-00130 204-00131 204-00132 204-00133 204-00134 204-00135 204-00136 204-00137 204-00138 204-00139 204-00140 204-00141 204-00142 204-00143 204-00144 204-00145 204-00146 204-00147 204-00148 204-00149 204-00150 204-00151 204-00152 204-00153 204-00154 204-00155 204-00156 204-00157 204-00158 204-00159 204-00160 204-00161 Model # MTS-160 MTS-200 MTS-400 MTS-600 MTS-800 WB125 WB165 14804-000 00160-043 00240-043 WMB304 WB174 13402-001 13402-005 13402-017 13402-019 3019-4 B7224DR47+PB/T 10127000000 10079-161 BATS68603 BATA6803 11114000 11125000 WCL302 WSD302 11106000 14865000 BHD1S-3624 BHD1A-3624 BHD1S-4824 BHD1A4824 BHD2S-3624 BHD2A-3624 BHD2S-4824 BHD2A-4824 WB100SS WB102SS WB104SS WB120SS WB122SS WB124SS WB130SS WB132SS WB134SS Description MULTI TIER SYSTEM MULTI TIER SYSTEM MULTI TIER SYSTEM MULTI TIER SYSTEM MULTI TIER SYSTEM WORK BENCH WORK BENCH SHOP DESK UTILITY CART UTILITY CART WALL MOUNTED BENCH WORK BENCH FRAMED SWING DOORS 36X3'3 FRAMED SWING DOORS 36X4'3 FRAMED SWING DOORS 36X7'3 FRAMED SWING DOORS 48X7'3 SHELVING ADD-ON UNIT PARTS PICK BINS ROD ACRYLIC TIE BACK SPACER BATTERY RACK STARTER BATTERY RACK ADD ON WALL MOUNT ANGLED TOP 28" X 60 ENCLOSED TECH BENCH SLIDING DOOR TEARDOWN BENCH TIER DRAWER 7 DRAWER SHELVING STARTER 7 DRAWER SHELVING ADDER 7 DRAWER SHELVING STARTER 7 DRAWER SHELVING ADDER 9 DRAWER SHELVING STARTER 9 DRAWER SHELVING ADDER 9 DRAWER SHELVING STARTER 9 DRAWER SHELVING ADDER
www.fordrotunda.com
Page #
9-3
9-2 9-2
11-6 11-6 9-3 9-3 9-3 9-3 9-3 9-3 9-3 9-3 11-6 11-6 11-6 11-6 11-6 11-6 11-6 11-6 11-6
28" X 48" SS OPEN LEG TEC BENCH 28" X 60" SS OPEN LARGE TECH BENCH 28" X 72" SS OPEN LARGE TECH BENCH 28" X 48" SS OPEN LARGE TECH BENCH 28" X 60" SS OPEN LEG TECH BENCH 28" X 72" SS OPEN LEG TECH BENCH 28" X 48" SS OPEN LEG TECH BENCH 28" X 60" SS OPEN LEG TECH BENCH 28" X 72" SS OPEN LEG TECH BENCH
16-62
1-800-ROTUNDA
Item # 204-00162 204-00163 204-00164 204-00165 204-00166 204-00167 204-00168 204-00169 204-00170 204-00171 204-00172 204-00173 204-00174 204-00175 204-00176 204-00177 204-00178 204-00179 204-00180 204-00181 204-00182 204-00183 204-00184 204-00185 204-00186 204-00187 204-00188 204-00189 204-00190 204-00191 204-00192 204-00193 204-00194 204-00195 204-00196 204-00197 204-00198 204-00199 204-00200 204-00201 204-00202 204-00203 204-00204 204-00205 204-00206 204-00207 Model # WMB300SS WMB302SS WMB304SS WCL300SS WCL302SS WCL304SS WB100 WB102 WB104 WB120 WB122 WB124 WB130 WB132 WB134 WMB300 WMB302 WCL300 WCL304 WSDL300 WSDL302 WSDL304 HDC7224 TS103608 WTL1048-W WTL200 WTL200SS WTL202 WTL202SS WTL204 WTL204SS 11147-000 11147-001 11147-002 WTL350 WTL350SS WTL352 WTL352SS WTL354 WTL354SS WTL300 WTL300SS WTL302 WTL302SS WTL304 WTL304SS Description 28" X 48" SS WALL MOUNT BENCH 28" X 60" SS WALL MOUNT BENCH 28" X 72" SS WALL MOUNT BENCH
www.fordrotunda.com
Page #
28" X48" SS ENCLOSED TECH BENCH 28" X 60" SS ENCLOSED TECH BENCH 28" X 72" SS ENCLOSED TECH BENCH 28" X 48" OPEN LEG TECH BENCH 28" X 60" OPEN LEG TECH BENCH 28" X 72" OPEN LEG TECH BENCH OPEN LEG TECH BENCH 28" X 60" OPEN LEG TECH BENCH 28" X 72" OPEN LEG TECH BENCH 28" X 48" OPEN LEG TECH BENCH 132 OPEN BENCH WITH SHELF 28" X 72" OPEN LEG TECH BENCH 28" X 48" WALL MOUNT BENCH 28" X 60" WALL MOUNT BENCH 28" X 48" ENCLOSED TECH BENCH 28" X 72" ENCLOSED TECH BENCH SLIDING DOORS FOR 48" W BENCH SLIDING DOORS FOR 60" W BENCH SLIDING DOORS FOR 72" W BENCH QUICK LANE COUNTER SS 72 X 24 THREE LEVEL STORAGE RACK WORK BENCH ENCLOSED WORKBENCH 48 X 28 X 28H ENCLOSED WORKBENCH 48 X 28 X 28H, SS TOP ENCLOSED WORKBENCH 60 X 28 X 28H ENCLOSED WORKBENCH 60 X 28 X 28H, SS TOP ENCLOSED WORKBENCH 72 X 28 X 28H ENCLOSED WORKBENCH 72 X 28 X 28H, SS TOP CASTER BASE FOR 48 W ENCLOSED BENCH CASTER BASE FOR 60 W ENCLOSED BENCH CASTER BASE FOR 72 W ENCLOSED BENCH ENCLOSED WORKBENCH 48 X 28 X 34H ENCLOSED WORKBENCH 48 X 28 X 34H, SS TOP ENCLOSED WORKBENCH 60 X 28 X 34H ENCLOSED WORKBENCH 60 X 28 X 34H, SS TOP ENCLOSED WORKBENCH 72 X 28 X 34H ENCLOSED WORKBENCH 72 X 28 X 34H, SS TOP ENCLOSED WORKBENCH 48 X 28 X 34H ENCLOSED WORKBENCH 48 X 28 X 34H, SS TOP ENCLOSED WORKBENCH 60 X 28 X 34H ENCLOSED WORKBENCH 60 X 28 X 34H, SS TOP ENCLOSED WORKBENCH 72 X 28 X 34H ENCLOSED WORKBENCH 72 X 28 X 34H, SS TOP 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-7 11-6 11-6 11-6 11-6 11-6 11-6 11-6 11-6
16-63
1-800-ROTUNDA
www.fordrotunda.com
209 NORCO INDUSTRIES Item # 209-00006 209-00009 209-00010 209-00011 209-00015 209-00016 209-00018 209-00019 209-00020 209-00021 209-00022 209-00032 209-00048 209-00049 209-00051 209-00052 209-00057 209-00059 209-00062 209-00066 209-00067 209-00068 209-00069 209-00070 209-00073 209-00077 209-00088 209-00089 209-00091 209-00097 209-00102 209-00104 209-00105 209-00107 209-00108 209-00109 209-00110 209-00111 209-00112 209-00113 209-00114 209-00117 209-00126 Model # 82950 72200C 72244 81004C 81209 81210 81222 81022A 81033A 81034A 81035A 72000D 72031 72033 76412 76412G 76512 76520 78013A 78056A 78057A 78100 78108 78204A 72050C 72508 86010 78090 72675 72509 71229 72507A 78022D 81006D 81012 78025 78000 78028 78029 78031 78032 78060 81036A Description 5 TON AIR LIFT JACK 22T AIR/HYDRAULIC FLOOR JACK 44T AIR/HYDRAULIC JACK 3T JACK STANDS 2/SET 10T JACK STAND MED HEIGHT 16.5 10T JACK STAND 22T JACK STAND 12 TO 20 20T STABILIZING STAND 3/4T HOIST STAND 3/4T HOIST STAND WITH PEDAL 1-1/2T UNDER HOIST STAND 1-1/2T TRANSMISSION LIFT 1 3/4 DIAMETER SPLINE SHAFT FLYWHEEL ADAPTER 12T FLOOR JACK 12T FLOOR JACK 12T AXLE JACK 20 TON STANDARD BOTTLE JACK 12T STANDARD PRESS ARBOR PLATES/50 TON PRESSES 50 TON PRESS WITH AIR/HYDRAULIC FOOT P 1000LB CAPACITY ENGINE STAND 1250LB ENGINE STAND 1000LB TRUCK MOUNTED CRANE 1-1/2T TRANSMISSION LIFT FUEL TANK SADDLE ADAPTER OPT ADAPTER/MID-RISE LIFT 3600LB CAR DOLLY POWER TRAIN LIFT/TABLE 5R55W,4R70W,AX4N & AXOD TRANS NYLON WHEEL KIT FOR 71230 FORD E40D & 4ROID TRANS ADAPTER 20 TON STANDARD PRESS 6 TON JACK STAND (30 LBS) 12 TON JACK STAND (86 LBS) ACCESSORY KIT FOR 20 TON PRESS ARBOR PLATES V PUSHING ADAPTER 3/4" DIAMETER RAM 1" DIAMETER RAM BEARING PULLER 50T PRESS ACCESSORY KIT 1T UNDER HOIST JACK 7-11 8-19 8-14 7-11 8-12 8-12 7-11 7-11 8-17 8-14 7-11 7-11 7-11 8-12 8-12 8-12 8-12 8-12 8-12 8-12 Page #
16-64
1-800-ROTUNDA
Item # 209-00127 209-00128 209-00129 209-00130 209-00131 209-00133 209-00134 209-00135 209-00136 209-00138 209-00140 209-00141 209-00142 209-00144 209-00150 209-00152 209-00153 209-00154 209-00155 209-00156 209-00157 209-00158 209-00159 209-00160 209-00161 209-00163 209-00164 209-00165 209-00167 209-00168 209-00169 209-00170 209-00171 209-00172 209-00173 209-00175 209-00176 209-00177 209-00178 209-00179 209-00180 209-00182 209-00183 209-00184 209-00185 Model # 82300C 904004B 910005B 72040A 78160 72212 72225 71000D 71100A 71226 71500E 71550E 72450A 78125 78024 72512 78200 78201 71155B 71300A 72230A 72475 72850 78099 78110C 71202A 71232 71240B 72220A 78106A 82990C 78100I 78108I 81205I 81208I 81210I 81222I 910130 82320 78600B 78605A 81209I 78202 78203 78606 Description WHEEL DOLLY REPAIR KIT REPAIR KIT BRAKE DRUM HANDLER 3 TON ENGINE STAND TELESCOPING JACK TELESCOPING JACK 10T FLOOR FAST JACK 10T AIR/HYDRAULIC FLOOR JACK HANDLE PROTECTOR KIT 5 TON FLOOR JACK
www.fordrotunda.com
Page #
8-19 8-19 8-19 8-19 8-19 8-14 8-17 7-11 8-14 8-17 8-17 8-19 8-14
6 TON AIR/HYDRAULIC FLOOR JACK 1/2 TON AIR/HYDRAULIC TRANS JACK 1250LB ENGINE STAND 25 TON DELUXE PRESS GF TRANSMISSION ADAPTER 2000 LB ENGINE STAND 6.0 LITER AND 6.4 LITER ENGINE STAND ADAPTERS 1 1/2 TON ON HIGH LIFT 3 TON SUV JACK 20 TON AIR/HYDRAULIC FLOOR JACK 3/4 TON AIR/HYDRAULIC TRANSMISSION JACK 2500LB POWER TRAIN LIFT TABLE 4 POINT ENGINE SUPPORT TOOL 100 TON AIR/HYDRAULIC SHOP PRESS 2 TON FASTJACK FLOOR JACK 2 1/4 TON FASTJACK 2 1/4 TON LOW PROFILE FASTJACK 20 TON FLOOR JACK 2500 LB. CAPACITY ENGINE CRANE 10 TON PORT AIR LIFT JACK 1000 LB CAPACITY ENGINE STAND (IMPORTED) 1250 LB. ENGINE STAND (IMPORTED) 5 TON JACK STANDS (IMPORTED) 10 TON PIN TYPE LOW JACK STAND (IMPORTED) 10 TON HIGH JACK STAND (IMPORTED) 22 TON PIN TYPE JACK STAND (IMPORTED) 10,000 PSI AIR/HYDRAULIC PUMP 1500LB CAPACITY WHEEL DOLLY 3 TON AIR/HYDRAULIC FLOOR CRANE ELECTRO-HYDRAULIC 3-TON FLOOR CRANE 10-TON JACK STANDS 6.2L Norco Engine Stand Adapter Set 6.7L Diesel Norco Engine Stand Adapters Set Engine Load Leveler
8-19 8-19
8-17
8-12
16-65
1-800-ROTUNDA
Item # 209-00186 209-00187 209-00188 209-00189 209-00190 209-00191 209-00192 209-00193 209-00194 209-00195 209-00196 218 WORLDWIDE VAPOR Item # 218-00003 218-00004 218-00005 218-00006 218-00007 218-00008 218-00011 218-00012 218-00013 218-00014 218-00015 218-00017 218-00019 218-00020 218-00023 218-00024 218-00026 218-00030 218-00031 218-00033 218-00034 218-00035 218-00036 218-00037 218-00038 218-00039 Model # WVA-01 WVA-02 WVA-03 WVA-522 WVA-06 HS400AC P3416UV WVA042 WVA044 WVA049 522B WVA16345 WVRP-333 WVRP-SN5838 WVRP-5925-03 WVRP-5925-09B WVRP-4380-500 200-22-227NG WVA-041 WVA-060 P0716UV WV605FK WV604FK WVA-067 WVA-065 P0712UV Description EXHAUST CONE ADAPTER ASSORTED CAP-PLUG SET SMOKE DIFFUSER COMPLETE ACCESSORY KIT Model # 72700A 72030A 72090A 72500E 72550B 72701A 72513 82305 76560 78115 71233 Description 1 Ton Underhoist Transmission Jack 300 Lb. capacity clutch jack 20 Ton air/ hydraulic oor jack
www.fordrotunda.com
Page #
1/2 ton capacity underhoist transmission jack 1/2 ton capacity dual pump underhoist transmission jack 1 Ton air/hydraulic transmission jack CD4E Adapter for Norco Transmission Jacks 300 Lb. Capacity Tire Lift - Air / Hydraulic Pump 60 Ton Capacity Heavy Duty Bottle Jack 1500 lb. Capacity Adjustible Engine Load Leveler 2 Ton Capacity Double Pump Floor Jack
8-14 8-14 8-14 8-16 8-17 8-19 Page # 14-8, 14-9 14-8, 14-9 14-8, 14-9 14-8, 14-9 14-8 14-8 14-9 14-8, 14-9
EVAP SERVICE PORT FITTING (STANDARD SIZE) 400000CP HALOGEN SPOT LAMP SOLUTION WITH ULTRA TRACE UV DYE EVAP SERVICE PORT FITTING (SMALL SIZE) FUEL NECK ADAPTER EVAP SCHRADER REMOVAL/INSTALL TOOL EVAPORATIVE EMMISSIONS LEAK DETECTION WITH NITROGEN UV LIGHT SUPPLY HOSE WITH NOZZLE SUPPLY NOZZLE FILTER FILTER O-RING KIT 100 PSI Pre-set Gas Flow Regulator Inert Gas Hose (25 ft. coiled) Inert Gas Pack Kit UltraTraceUV Enhanced EVAP Smoke Machine Adj. w/Inert Gas Pk & Flow Mtr Standard EVAP Smoke Machine with Inert Gas Pack Large Adapter Cone - VacUtec Smoke Machine Accessory Combination Diagnostic Light Kit - VacUtec Accessory UltraTraceUV
16-66
1-800-ROTUNDA
www.fordrotunda.com
219 CLIPLIGHT Item # 219-00022 219-00023 219-00024 219-00025 219-00026 219-00027 219-00028 219-00029 219-00030 219-00031 219-00032 219-00033 219-00034 219-00035 219-00036 219-00037 219-00038 219-00039 219-00040 219-00041 219-00042 219-00043 219-00044 219-00045 219-00046 219-00047 219-00048 219-00049 219-00050 219-00051 219-00052 219-00053 219-00054 219-00066 219-00067 219-00068 219-00069 219-00071 219-00073 219-00074 219-00075 219-00076 Model # 1400FJP 1401FJP 1405 1406 25087 25088 25089 25090 25091 25092 25093 25094 25141 25138 25112&25108 25113&25109 25114&25110 25115&25111 25139 25140 25106 25099 25100 25101 25102 25095 25096 25097 25098 25103 25104 25105 25107 25116 710 701710 703710 87DC 84DC CL-00732 CL-00739 407 Description A/C FLUSH & PURGE A/C FLUSH MACHINE PACKAGE COMPNT FITTING KIT WITH CASE REPLACEMENT AIR FILTER PACK (4-activated charcoal/1- coalescing lter element). MALE SPRING LOCK FITTING MALE SPRING LOCK FITTING MALE SPRING LOCK FITTING MALE SPRING LOCK FITTING FEMALE SPRING LOCK FITTING FEMALE SPRING LOCK FITTING FEMALE SPRING LOCK FITTING FEMALE SPRING LOCK FITTING 8PC SPRING LOCK SET 10PC SPRING LOCK WITH 2 FITTING 3/8 PEANUT FITTING 25115&25108 1/2 PEANUT FITTING 25113&25109 5/8 PEANUT FITTING 25114&25110 3/4 PEANUT FITTING 25115&25111 8PC PEANUT FITTING 10PC PEANUT FITTING WITH 2 FITTING 3/8MALE TUBE 5/8 LONG THREAD 3/8MALE TUBE 5/8 SHORT THREAD 1/2 MALE TUBE 5/8 MALE TUBE 3/4 MALE TUBE 3/8 MALE TUBE 1/2 FEMALE TUBE 5/8 FEMALE TUBE 3/4 FEMALE TUBE 9/32 FEMALE TUBE 9/16-16THEAVY DUTY 5/16 FEMALE TUBE 9/16-18THEAVY DUTY H BLOCK EVAPORATOR FLAT BLOCK COMPRESSOR VACUUM TEST FITTINGS(2) 3PC LUBE/DYE-SET R12 LOOP/ADD ON INJECTOR KIT-SET R134A LOOP/ADD ON INJECTOR KIT-SET VECTOR 7 UV LIGHT UV LAMP 4 LED FOCAL LENS 2006 TO CURRENT A/C FLUSH ADAPTER KIT ACCESSORY REPLACEMENT KIT FOR AC FLUSH ADAPTER UNIVERSAL ADAPTER KIT 2-3 2-3 2-3 2-3 2-3 Page #
16-67
1-800-ROTUNDA
Item # 219-00077 219-00078 219-00080 222 G-TEC Item # 222-00002 222-00003 222-00005 222-00006 222-00007 222-00008 222-00009 222-00010 222-00011 222-00015 222-00016 222-00017 222-00018 222-00019 222-00020 222-00021 222-00022 222-00023 222-00024 222-00025 222-00026 222-00027 223 CHALLENGER LIFTS Item # 223-00192 223-00193 223-00248 223-00317 223-00318 223-00320 223-00321 223-00322 223-00323 223-00333 Model # 15000 15002 B10264A 10266 10267 40230 12000 12001 12002 10303 Description Model # 864-859-50 TTBA NBP-2 TTCF-SDA TTCF-7AR TTCF-UGK TTCF-PV TTCF-HSK TTCF-DA TTCF-POF TTCF-GC5101 B TTCF-HM TTCF-BP1 TTCF-NBP2 TTCF-BP1-6 TTCF-SP6 TTCF-P3 TTCF-WK TTCF-HK TTCF-VPBM TTCF-4028V TTCF-4000V Description FLOWMETER Model # D-219-00077 219-00078 20715 Description
www.fordrotunda.com
Page #
ADAPTERS/O-RINGS FOR PANCAKE FILTER Flushworks Machine Check Valves Qty of (2) Flushworks Air Pump with Diaphragm Page # 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4 10-4
BANJO ADAPTER SET OF 4 (2-12MM SPIN OIL FILTER 6 PACK SUPERDUlY ADAPTER KIT TRANSMISSION HEATED COOLER LINE FLUSHER FLUSH UPGRADE KIT OIL PURGE VALVE KIT REPLACEMENT HOSE KIT DOMESTIC ADAPTER KIT (DOES NOT INCLUDE SUPER FORDfGMfCHRY LATE MODEL PUSH-ON FITTINGS FORD LATE MODEL PUSH-ON FITTINGS Equipment HOUR METER G-Tec By Pass Filter (Single Filter) G-Tec Non By Pass Filter (Single Filter) G-Tec BP1 Filters Qty (6) G-Tec Combo Pack Qty (3) NBP2 & (3) BP1 Filters FORD 500/TAURUS PUSH ON 16MM ADAPTER WIRING KIT - Replacement for G-Tec Cooler & Line Flusher HEATER KIT- Replacement for G-Tec Cooler & Line Flusher PUMP & MOTOR - Replacement for G-Tec Cooler & Line Flusher G-Tech OBERG FILTER ASSEMBLY W/4 28 MICRON Kit" G-Tech 28 Micron Replacement Filter Screen
10-4
Page # 8-10
HEAVY-DUTY 2-POST LIFT - 15,000 LBS. CAPACITY - STANDARD HEIGHT HEAVY-DUTY 2-POST LIFT - 15,000 LBS. CAPACITY - 2' HEIGHT EXTENSION AIR/ELECTRIC SERVICE STATION WITH FILTER/LUBRICATOR/ REGULATOR 4-POST LIFT DRIVE-THRU RAMP KIT ROLLING OIL DRAIN PAN - 32 GALLON CAPACITY INTERNAL AIR LINE KIT FOR ROLLING JACKS HEAVY-DUTY 2-POST LIFT - 12,000 LBS. CAPACITY - STANDARD HEIGHT HEAVY-DUTY 2-POST LIFT - 12,000 LBS. CAPACITY - 1' HEIGHT EXTENSION HEAVY-DUTY 2-POST LIFT - 12,000 LBS. CAPACITY - 2' HEIGHT EXTENSION 6" SLIP-ON ADAPTERS
8-10
8-10
16-68
1-800-ROTUNDA
Item # 223-00334 223-00335 223-00336 223-00337 223-00348 223-00352 223-00361 223-00362 223-00379 223-00384 223-00386 223-00387 223-00388 223-00389 223-00390 223-00391 223-00392 223-00393 Model # 10304 CS1220 CS1520 10300 10306 CSPK 18000 18002 CS1020LS 15060 3PH208 3PH230 3PH460 3PHCS 3PH4P CS8RK STAYDRY CS1020WV Description 10" SLIP-ON ADAPTERS
www.fordrotunda.com
Page #
HEAVY-DUTY ENVIROLIFT CASSETTE IN GROUND LIFT 12,000 LBS. CAPACITY HEAVY-DUTY ENVIROLIFT CASSETTE IN GROUND LIFT 15,000 LBS. CAPACITY LUXURY CAR ADAPTERS ADAPTER ORGANIZER KIT ENVIROLIFT CASSETTE IN GROUND LIFT - UNIVERSAL PREKIT HEAVY-DUTY 2-POST LIFT - 18,000 LBS. CAPACITY - STANDARD HEIGHT HEAVY-DUTY 2-POST LIFT - 18,000 LBS. CAPACITY - 2' HEIGHT EXTENSION 10,000 LBS. ENVIROLIFT LESS SUPERSTRUCTURE FLOOR MOUNTED POWER UNIT STAND 2 POST UPGRADE 3 PH 208V 2 POST UPGRADE 3 PH 230V 2 POST UPGRADE 3 PH 460V CASSETTE LIFT UPGRADE 3 PHASE 4 POST UPGRADE 3 PHASE 8000 POUND CASSETTE LIFT RUNWAY KIT AUTOMATIC LIQUID REMOVAL SYSTEM FOR CASSETTE LIFTS 10,000 LB VERSYMMETRIC ENVIROLIFT W/3-STAGE ARM DESIGN & RUBBER-PAD SUPERSTRUCTURE 3 BUTTON BENCH MOUNTED CONTROLS ORDERED WITH ANY CHALLINGERCS0920, CS1020 OR CS1220 ENVIROLIFT INGROUND. ADD BMC TO MODEL NUMBER AT TIME OF LIFT ORDER. 10,000 LB SHORT-RISE LIFT WITH ELECTRIC/HYDRALIC POWER UNIT. INCLUDES 4 SPOTTING BLOCKS. 10000 LB VERSYMMETRIC 2-POST LIFT W/ 3 STAGE FRONT ARMS & MECHANICAL LOCK RELEASE FOUR 6 INCH SLIP ON EXTENSION PADS WITH ORGANIZER KIT CL10 2 POST LIFT WITH OFFSET 3 STAGE FRONT ARMS AND 3 STAGE REAR ARMS 6000LB ROLLING JACK STACK PAD KIT FOR 10K/LB LIFTS ORGANIZER RACK KIT 3IN STACK EXTENSION (SINGLE) 6IN STACK EXTENSION (SINGLE) 10K VERSYMMETRIC 2-POST/3-STAGE FRONT/REAR/2FT EXT 10K VERSYMMETRIC 2-POST/3-STAGE FRONT/REAR/3FT EXT VERSYMMETRIC SUPERSTRUCTURE FOR CS1020 10K LB INGROUND AIR/ELECTRIC WORKSTATION FOR 4-POST LIFTS (PAIR) 6IN HEIGHT ADJUSTERS
8-11 8-11
8-10
8-11 8-11
223-00394
BMC
223-00395 223-00396 223-00397 223-00398 223-00399 223-00400 223-00401 223-00402 223-00403 223-00404 223-00405 223-00406 223-00411 223-00412
SRM10 VS10 10305 CL10V3 RJ6 10315 10316 B2206-3 B2206-6 CL10V3-2 CL10V3-3 CS1020SSWV 10310 10313
8-10
16-69
1-800-ROTUNDA
Item # 223-00413 223-00414 223-00415 223-00416 223-00417 223-00418 223-00419 223-00420 223-00421 223-00422 223-00423 223-00424 223-00425 223-00426 223-00427 223-00428 223-00429 223-00430 223-00433 223-00434 223-00435 223-00436 223-00437 223-00438 223-00439 223-00440 223-00441 223-00442 223-00443 223-00444 223-00445 223-00446 223-00447 223-00448 223-00449 223-00450 223-00451 223-00452 223-00457 223-00458 223-00459 223-00460 223-00461 223-00462 Model # CS1020CK CLM16 CLM16-W CLM16-2 CLM16-2-W CLM16-4 CLM16-4-W CLM16-6-W CLM-AB-16-02 CLM-AB-16-08 CLM-AB-16-16 CLM-TA-50 CLM-RCC-25 CLM-SMA-2H CS1220CK CS1520CK 10266L 44AK18 44RK18 44RKE18 44RK30 44RKE0 44RK40 CLM16-6 THK 4P12EFX 4P12XFX AV1020WV 10318 10317 10314 CL10V3-DPC CL10V3-2-DPC E12 4015EFX 4015XFX 4015EFO 4015XFO RJ7.5 SD100AV CS1220LS CS1220SS E10 E10EH2 Description
www.fordrotunda.com
Page #
COMPLETION KIT FOR CS1020 INGROUND CASSETTE LIFTS MOBILE LIFT COLUMN (SINGLE) WIDE BODY MOBILE LIFT COLUMN (SINGLE) MOBILE COLUMN LIFT SYSTEM (PAIR) WIDE BODY MOBILE COLUMN LIFT SYSTEM (PAIR) MOBILE COLUMN LIFT SYSTEM - 4 COLUMNS WIDE BODY MOBILE LIFT SYSTEM - 4 COLUMNS WIDE BODY MOBILE LIFT SYSTEM - 6 COLUMNS 16,000LBS. MOBILE SUPPORT STANDS - SHORT - 21.5IN 16,000LBS. MOBILE SUPPORT STANDS - MEDIUM - 31.5IN 16,000LBS. MOBILE SUPPORT STANDS - TALL - 51.25IN TO 78.75IN FINE ADJ SCREWS FOR SUPPORT STANDS (EACH). REMOTE CONTROL W/ 25FT CABLE HEAVY DUTY SMALL WHEEL ADAPTERS - 5IN COMPLETION KIT FOR CS1220 COMPLETION KIT FOR CS1520 RAMP KIT 48 INTERNAL AIR LINE KIT FOR 18K 4-POST LIFT RAMP KIT 39 RAMP KIT 52 RAMP KIT 36 RAMP KIT 71 RAMP KIT 96 MOBILE COLUMN LIFT SYSTEM - 6 COLUMNS TIRE HANGER KIT FOR CL10 SERIES 2-POST LIFTS 4 post lift 12K, 182"WB Econo Line, Closed Frnt, Gen Serv. 4 post lift 12K, 210"WB Econo Line, Cosed Frnt, Gen Serv. New EnviroLift with AquaVantage FRAME ADAPTERS SET OF 4 REDUCER BUSHING SET OF 4 FRAME ADAPTERS SET OF 2 VERSYMMETRIC PLUS WITH DPC CONTROLS VERSYMMETRIC PLUS WITH DPC CONTROLS w/ 2FT COL EXT 12k 2post lift w/truck adapter kit 15K 4 POST GENERAL SERVICE LIFT 182 Wheelbase 15K 4 POST GENERAL SERVICE LIFT 210 Wheelbase 15K 4 POST GENERAL SERVICE LIFT 182 Wheelbase 15K 4 POST GENERAL SERVICE LIFT 210 Wheelbase 7500LB ROLLING JACK STAYDRY SYSTEM FOR AQUAVANTAGE LIFT COMPLETION KIT FOR CS1220-LESS SUPERSTRUCTURE Superstructure for CS1220 10K 2post Above Ground Lift W/3-Stage Front Arms 2FT COLUMN EXT KIT FOR Challenger Model E10 Lift 8-10 8-10, 8-11 8-10 8-11 8-10, 8-11 8-10
16-70
1-800-ROTUNDA
Item # 223-00463 223-00464 223-00465 223-00466 223-00467 223-00468 223-00469 223-00470 223-00471 223-00472 223-00473 223-00474 223-00475 223-00476 223-00477 Item # 239-00001 239-00002 239-00003 239-00004 239-00005 239-00006 239-00007 239-00008 239-00009 239-00010 239-00011 239-00012 239-00014 239-00015 239-00016 239-00017 239-00018 239-00019 239-00020 239-00020 Model # E12EH2 EV1020 EV1020CK EV1020SS EV1220 EV1520 CS8RK CSPK EV1220SS EV1520SS EV1220CK EV1520CK EV1020LS EV1220LS EV1520LS Model # SCU2076A SCU2073A SCU2066A SCU2062A RP2098A SCU2058A SCU3203A SCU3189A SCU3144A RP3406A SCU3126A SCU3306A SCU3047A SEP1001A SEP1004A SEP1016A SEP1023A SEP1045A SDSD175L1A SDSD175L1A Description
www.fordrotunda.com
Page #
2FT COLUMN EXT KIT FOR Challenger Model E12 Lift EV1020 10K LB INGRD ENVIROLIFT W/3 STAGE ARMS Chrome Pistn COMPLETION KIT ONLY FOR EV1020 ENVIROLIFT Inground Lift SUPERSTRUCTURE ONLY FOR EV1020 10K LB INGROUND LIFT EV1220 12K LB HEAVY-DUTY INGROUND ENVIROLIFT Chrome Piston EV1520 15K LB HEAVY-DUTY INGROUND ENVIROLIFT Chrome Piston 8K LB. RUNWAY SUPERSTRUCTURE EV1020 EnviroLift Cassette Inground Lift - Universal Pre-Kit SUPERSTRUCTURE ONLY FOR EV1220 12K LB INGROUND LIFT SUPERSTRUCTURE ONLY FOR EV1520 15K LB INGROUND LIFT COMPLETION KIT ONLY FOR EV1220 ENVIROLIFT Inground Lift COMPLETION KIT ONLY FOR EV1520 ENVIROLIFT Inground lift Inground Cassette Lift 10K lb - Less Superstructure Inground Cassette Lift 12k lb - Less Superstructure Inground Cassette Lift 15k lb - Less Superstructure Description CABINET 4DRAWER 48 COMPARTMENT CABINET 5DRAWER 76 COMPARTMENT CABINET 6DRAWER 96 COMPARTMENT CABINET 6DRAWER 100 COMPARTMENT CABINET 7DRAWER 128 COMPARTMENT CABINET 7DRAWER 136 COMPARTMENT CABINET 6DRAWER 76 COMPARTMENT CABINET 7DRAWER 88 COMPARTMENT CABINET 9DRAWER 156 COMPARTMENT CABINET 10DRAWER 163 COMPARTMENT CABINET 10DRAWER 188 COMPARTMENT CABINET 11DRAWER 216 COMPARTMENT CABINET 12DRAWER 248 COMPARTMENT CABINET 7DRAWER 152 COMPARTMENT CABINET 6 DRAWER 108 COMPARTMENT CABINET 5DRAWER 92 COMPARTMENT CABINET 5DRAWER 92 COMPARTMENT CABINET 2DRAWER 16 COMPARTMENT CABINET 1SHELF AND BOTTOM PAN CABINET 1SHELF AND BOTTOM PAN Page #
16-71
1-800-ROTUNDA
Item # 239-00021 239-00021 239-00022 239-00023 239-00024 239-00025 239-00027 239-00028 239-00029 239-00030 239-00031 239-00032 239-00033 239-00034 239-00035 239-00036 239-00037 239-00038 239-00039 239-00040 239-00041 239-00042 239-00043 239-00044 239-00045 239-00047 239-00048 239-00049 239-00050 239-00051 239-00052 239-00053 239-00054 239-00055 239-00056 239-00057 239-00059 239-00061 Item # 250-90000 250-00001 250-00002 250-00003 Model # SDSD175R1A SDSD175R1A SEP2004A SEP2012A SEP2025A SEP2058A SEP2029A SEP2037A SEP2066A RP2112A RP2113A SEP2076A SEP2079A SEP2041A RP2114A SEP3014A SEP3026A SEP3039A SEP3054A SEP3047A RP3098A RP3092A SEP3062A SEP3306A RP3404A SEP3110A SEP3126A SEP3140A SEP3155A SEP3144A SEP3163A SEP3189A SEP3203A SEP3214A SEP3219A SL10 SCU-3163-A SCU-3155-A Model # Custom Booth Package-Rotunda XLWSC-241209 PFMDP-271409 ACCT_h_PKG Description
www.fordrotunda.com
Page #
CABINET 1SHELF AND BOTTOM PAN CABINET 1SHELF AND BOTTOM PAN CABINET 11DRAWER 248 COMPARTMENT CABINET 10DRAWER 200 COMPARTMENT CABINET 9DRAWER 184 COMPARTMENT CABINET 7DRAWER 120 COMPARTMENT CABINET 8DRAWER 144 COMPARTMENT CABINET 8DRAWER 144 COMPARTMENT CABINET 6DRAWER 84 COMPARTMENT CABINET 6DRAWER 98 COMPARTMENT CABINET 6DRAWER 78 COMPARTMENT CABINET 4DRAWER 44 COMPARTMENT CABINET 3DRAWER 17 COMPARTMENT CABINET 7DRAWER 120 COMPARTMENT CABINET 1DRAWER 10 COMPARTMENT CABINET 15DRAWER 336 COMPARTMENT CABINET 14DRAWER 300 COMPARTMENT CABINET 13DRAWER 256 COMPARTMENT CABINET 12DRAWER 244 COMPARTMENT CABINET 12DRAWER 244 COMPARTMENT CABINET 11DRAWER 204 COMPARTMENT CABINET 11DRAWER 200 COMPARTMENT CABINET 11DRAWER 192 COMPARTMENT CABINET 11DRAWER 192 COMPARTMENT CABINET 11DRAWER 275 COMPARTMENT CABINET 10DRAWER 164 COMPARTMENT CABINET 10DRAWER 164 COMPARTMENT CABINET 9DRAWER 144 COMPARTMENT CABINET 9DRAWER 144 COMPARTMENT CABINET 9DRAWER 140 COMPARTMENT CABINET 8DRAWER 104 COMPARTMENT CABINET 7DRAWER 80 COMPARTMENT CABINET 6DRAWER 64 COMPARTMENT CABINET 5DRAWER 37 COMPARTMENT CABINET 4DRAWER 29 COMPARTMENT LOCKING DEVICE DRAWER CABINET WITH STF/ST DRAWER CABINET WITH STF/ST Description GFS Custom Booth Package GFS EXCEL LIMITED PAINT & PREP WORK STATION GFS PERFORMER Downdraft Paint Booth Package ADVANCE CURE AIR ACCERATION SYSTEM FOR WATERBORNE COATINGS Page # 3-1 3-1 3-1 3-1
16-72
1-800-ROTUNDA
www.fordrotunda.com
254 PROSPOT Item # 254-00002 254-00003 254-00004 254-00008 254-00009 254-00010 254-00011 254-00014 254-00015 254-00016 254-00017 254-00018 254-00019 254-00020 Item # 256-00001 256-00005 256-00006 256-00021 256-00022 256-00023 256-00024 256-00025 256-00026 256-00032 256-00044 256-00052 256-00053 256-00060 256-00061 256-00062 256-00063 256-00064 256-00065 256-00067 256-00068 256-00069 256-00071 256-00072 256-00073 256-00074 256-00075 Model # PR2000 PR2000COM PR-2000OH PS503A PRO66 CLT45 PS403 I4 I4COMBI PS306A 80-0001 PLT-50/A 254-00019 MWS-AL Model # ALU-13 ATS75 ATS100 CARALU75F CSA17075 CSA170100 FCA170A FCL170A FL170A TL170A ATS150 CSA230150 FCA230A FT75 JDI-6EV JDI-20EV JDI-6EVADAPTER JDI-AF-10E JDI-16DC-E 61431-2 HA-15242-00 HA-15241-00 JDI-FF25 ALU-13HD 2076-ESE 11-006 14-100 Description 3 PHASE INVERTER SPOT WELDER 3 PH INVERTER SPOT WELD WITH MIG BASIC CEILING MOUNT SYS 23X23 600MM EXTENSION ARM PRO PULL DENT REMOVAL SYSTEM MAGNETIC GROUND ADAPTER X-ADAPTER GOR C-GUN INVERTER SPOT WELDER INVERTER SPOT WELDER WITH MIG WELDER I4 & PR2000 Extension Arm Assembly 280mm/11.5 Welder Protective Cover (PR-2000 & i4) PNEUMATIC ELECTRODE DRESSER i4-480v Welder Aluminum Mobile Work Station and Dent Pulling System Description ALUMINUM RAIL-13' SUPPORT FOR 3' HOSE SUPPORT FOR 4" HOSE SLIDING CRAB & HOSE REEL SLIDING CRAB FOR 3" HOSE SLIDING CRAB FOR 4" HOSE FAN CONNECTION FLANGE DUCT CONNECTION FLANGE FLANGE STOP RAIL CONNECTORS HOSE SUPPORT 6IN HOSE SLIDING CRAB FOR 6IN HOSE FAN CONNECTION FLANGE HOSE STOP FOR 3IN HOSE 6 GAL FLUID EVACUATOR 20 GAL FLUID EVACUATOR 3/8IN TRANSAXLE ADAPTER 10G LOW PROFILE PORTABLE DRAIN 16G PORTABLE OIL DRAIN OIL DRAIN CONVERSION KIT MALE COUPLER FEMALE COUPLER FUEL FILTER ALUMINUM RAIL - 13' - HEAVY DUTY TRUCK NEOPRENE SEAL - FT SEAL GAP PATCH RUBBER PREP 7-9 6-1 6-1 6-1 6-1 6-1 7-9 7-9 7-9 Page # 7-9 7-9 7-9 7-9 7-9 7-9 7-9 Page #
16-73
1-800-ROTUNDA
Item # 256-00076 256-00077 256-00078 256-00079 256-00080 256-00081 256-00082 256-00083 256-00097 256-00098 256-00099 256-00106 256-00112 256-00113 256-00114 256-00116 256-00120 256-00121 256-00122 256-00123 256-00124 256-00125 256-00126 256-00127 256-00128 256-00129 256-00130 256-00131 256-00134 256-00135 256-00136 256-00137 256-00138 256-00139 256-00140 256-00141 256-00143 256-00144 256-00145 256-00146 256-00149 256-00151 256-00152 256-00153 256-00154 Model # 14-008 FCA230A FCL230A FL230A TL230A CSA-230-150 CSA-ARL-6 ATS150 FT75 FT100 FT150 FAR-10 JDI-22DCX JDI-25HDC AF-10 AF-15 BGT-160-CAP CAR-ALU-HV/100 CAR-PH EV-TOOL JDI-26GC-LRJHOSE JDI2436 EVU-3 EVU-4 EVUD-1 EVCP-83 EVCP-84 EVIG-1 EV-5100 EVT-3 ALU-3FT-VTAP CSA-EVT FC-P30 FC-P30-P FC-P30-A JDI-25GC-E85 5HP460V3 AF-15-BD 5HP460V3-T ALU-6 EG-25L TQ1515 QBCS-122-BD QBCS-122-DD QBCS-135-BD Description CEMENT FAN CONNECTION FLANGE DUCT CONNECTION FLANGE FLANGED STOP RAIL CONNECTOR SLIDING CRAB FOR 6" HOSE SLIDING CRAB HOSE REEL - ARL HOSE SUPPORT FOR 6" HOSE HOSE STOP FOR 3" HOSE HOSE STOP FOR 4" HOSE HOSE STOP FOR 6" HOSE FAN/REEL MOUNTING FLANGE 22 GALLON OIL CHANGE SYSTEM 25 GALLON SELF EVAC OIL DRAIN EUROVENT FAN SERIES 10 EUROVENT FAN SERIES 15
www.fordrotunda.com
Page #
7-9
6-1 6-1
RUBBER CAP FOR BGT-160 NOZZLE SLIDING HOSE REEL HI VOLUME PULL HANDLE KIT FOR CAR REELS NEOPRENE SEAL INSTALL TOOL BRADED 8' JDI GAS CADDY HOSE BIG MOUTH TRANSMISSION PAN ADAPTER 3" COMPLETE UNDERGROUND SYSTEM 4" COMPLETE UNDERGROUND SYSTEM REPLACEMENT DOOR ASS'Y 3" X 8' CRUSHPROOF HOSE 4" X 8' CRUSHPROOF HOSE HOSE INSERTION GUIDE PORTABLE EXHAUST EXTRACTION SYSTEM TELESCOPING OVERHEAD EXHAUST SYSTEM RAIL VENT-TAP ASSEMBLY SLIDING CRAB W/TELESCOPING HOSE 30 GALLON GAS CADDY FOR ALL FUELS Air kit for FC-P30 AIR POWERED 30 GALLON GAS CADDY FOR ALL FUELS 25 GALLON GAS CADDY FOR ALL FUELS Motor Starter 0-5 Hp motors Belt Drive Fan EuroVent Motor Starter 0-5 Hp w/Timer 6' EuroVent Rail Torque Reel - EuroVent Sliding Crabs 10-15lb. Hose Balancer New Belt Drive Exhaust Fan New Direct Drive High Efcient Fan New Belt Drive Exhaust Fan 7-10 7-10 6-1 6-1 7-10 7-10
16-74
1-800-ROTUNDA
Item # 256-00155 256-00156 256-00157 256-00158 256-00159 256-00160 256-00161 256-00162 256-00163 256-00164 256-00166 256-00167 256-00168 256-00169 256-00170 256-00171 256-00172 256-00173 256-00174 256-00175 256-00176 256-00177 256-00178 256-00179 256-00180 256-00181 256-00182 256-00183 256-00184 256-00185 256-00186 256-00187 256-00188 256-00189 256-00190 256-00191 256-00192 256-00193 256-00194 256-00195 256-00196 256-00197 256-00198 256-00199 256-00200 Model # QBCS-135-DD QBCS-15-BD QBCS-165-BD QC-4D QCN-2040 QCN-2041 QCN-2041S QCN-6782S QCS-2041 QCY-4 QC-3CP DEF-1A DEF-TOTE-A FSDA-6 FSDA-3 FSDA-4 CAR-ALU-HD-4 AFC-100-94 JDI-20EV-BJLR JDI-20COMBO-BJLR JDI-27DC 2039 ALU-3FT-VTAP-HD CB-CMA CB-RM CB-T60 CB-TC EH325-350 EH-350-350 EH425-600 EH625-600-C EH825-1200 Fan-Flex OF-Vent-Side OF-VENT-SIDE-HD OF-VENT-TOP QBCS-IN QBCS-OUT QCR-1452 JDH300 JDH400 JDP-302 JDP-303 JDY303 JDY404 Description New Direct Drive Fan New Belt Drive Exhaust Fan New Belt Drive Exhaust Fan
www.fordrotunda.com
Page #
4" Quick Connect Coupler w/Damper 4" Quick Disconnect Nozzle 6" Quick Connect Nozzle 4" High Temp Quick Connect 6" X 8" Nozzle 4" High Temp Quick Connect 4" X 6" Nozzle Portable Tailpipe Stand 4" "Y" Hose Adapter-quick connect 3 Quick Connect Coupler for Crushproof DEF 55 Gallon Drum Dispensing System - Electric DEF 275 Gallon IBC Tote Dispensing System - Electric Stainless Steel EuroVent Super Duty Diesel Adapter-6 Stainless Steel EuroVent Super Duty Diesel Adapter-3 Stainless Steel EuroVent Super Duty Diesel Adapter-4 EuroVent 4 Hvy Dty 25' Exhaust Hose Reel Deluxe Automotive Oil Filter Crusher 20-Gallon Fluid Evacuator w/Bowl 20-Gallon Combination Oil Drain & Evacuator 27-Gallon HD Self-Evac Poly Oil Drain 2039 EuroVent nozzle for 6 HD hose" Rail Tap for HD EuroVent exhaust rail CB-CMA EuroVent Adjustable Ceiling Bracket CB-RM EuroVent Rail Mount Ceiling Bracket CB-T60 EuroVent 60 Straight Mounting Tube" CB-TC EuroVent Mounting Tube Connector EH325-350 EuroVent 3 X 25' 350F Exhaust Hose" EH-350-350 EuroVent 3 X 50' 350F Exhaust Hose" EH425-600 EuroVent 4 X 25' 600F Exhaust Hose" EH625-600-C EuroVent 6 X 25' 600F Exhaust Hose" EG825-1200 EuroVent 8 X 25' 1200F Exhaust Hose" Flan-Flex EuroVent Inlet Flex Connection EuroVent Side Duct Connection (For VTAP) OF-VENT-SIDE-HD EuroVent Side Vent for HD Systems EuroVent Top Duct Connection (For VTAP) EuroVent QBCS Inlet Duct EuroVent QBCS Outlet Duct QCR-1452 EuroVent QuickLink Organizer Rack JDH300 EuroVent 3 "Crushproof" Exhaust Hose (11')" JDH400 EuroVent 4 "Crushproof" Exhaust Hose (11')" JDP-302 EuroVent Door Port for 3 Hose (ADF30)" JDP-303 EuroVent Door Port for 4 Hose (ADF40)" JDY303 EuroVent 3 Y-Exhaust Hose Assembly" JDY404 EuroVent 4 Y-Exhaust Hose Assembly"
16-75
1-800-ROTUNDA
Item # 256-00201 256-00202 256-00203 257 VETRONIX Item # 257-00008 257-00011 257-00012 257-00013 257-00014 257-00015 257-00018 257-00019 257-00020 257-00021 257-00022 257-00023 257-00024 257-00025 257-00026 257-00027 257-00028 257-00029 257-00031 257-00033 258 AIRSEPT Item # 258-00005 261 VACULA AUTOMOTIVE Item # 261-00002 261-00003 261-00004 261-00005 261-00006 261-00007 261-00008 261-00009 261-00010 261-00011 261-00013 261-00014 261-00016 Model # 188352 120188411 120188406 120188269 120188416 12-018-8403 18-8889 12-018-8404 12-018-8409 12-018-8415 12-018-8101 12-016-5050 12-018-8421 Description DRAIN TWIN WITH 2 TIER CART FORD ADAPT 3TAB FORD ADAPT 2TAB RETROFIT HOSE FORD UNIVERSAL ADAPTER Model # 62644 Description Applicator Tool for YN29 - UltiFlex2 Model # 01002724 01002724-006 02002986 10027170-001 02003000 06500127 F00K104752 02003097 02002989 06500133 02002984012 02003001 03001070 02002882 FPEF00K104753 2002914 06500124-002 2002435 F-00K-105-004 F-00K-104-684 Description DRIVE SHAFT WEIGHT KIT 6PK WEIGHT KIT ICP DRIVESHAFT BALANCE KIT REMOTE TRIGGER SWITCH TIMING LIGHT MASTERTECH MTS-4000 ANALYZER VIBRATION SENSOR PHOTO-TACHOMETER MAGNETIC BASE/MOUNT REFLECTIVE TAPE METRIC SCALE Model # AF-12 CAR-ALU-HD-6 FC-25GC Description
www.fordrotunda.com
Page #
AF-12 EuroVent Ehaust Fan-Series 12 EuroVent 6 Hvy Dty 25' Exhaust Hose Reel" Fuel Chief 25 Gallon Gas Caddy - UL Approved 6-1 Page # 14-6 14-6 14-6 14-6 14-6 14-6 14-6 14-6 14-6 14-6
12 VDC CIGARETTE ADAPTER CABLE OBD-II INTERFACE CABLE STORAGE CASE FOR MTS 4000 INDUCTIVE LOOP FOR TIMING LIGHT RS 232 CABLE AC/DC POWER SUPPLY COMPACT FLASH MEMORY CARD MTS 4000/4100 Noise Upgrade Kit Page # 2-4 Page # 1-1 1-1 1-1 1-1 1-1 1-1 1-1 1-1 1-1 1-1 14-6 14-6 14-6 14-6 14-6
SCREW ON ADAPT CAP 46.5X3.5MM CLUTCH BLEEDER KT WITH AUTO REFILL CHRYSLER 2TAB SINGLE 2CAP ADAPTER GM SINGLE 3 TAB ADAPTER GM/CHRYSLER SUV STEP MASTER ADAPTER INLET TUBE STANDARD DX 12 FLUID EVACUATION SYSTEM Brake Bleeder Adapter 3-Tab 2009+
16-76
1-800-ROTUNDA
www.fordrotunda.com
267 SAMSON Item # 267-00002 267-00003 267-00004 267-00005 267-00006 267-00007 267-00008 267-00009 267-00010 267-00011 267-00012 267-00013 267-00014 267-00015 267-00017 267-00018 267-00019 267-00020 267-00022 267-00023 267-00024 267-00025 267-00026 267-00027 267-00028 267-00029 267-00030 267-00031 267-00032 267-00033 267-00034 267-00035 267-00036 267-00037 267-00038 267-00039 267-00040 267-00041 267-00042 267-00043 267-00044 267-00045 267-00046 Model # 3724 200 210 212 400 410 422 308 262 211 311 1327 PN100UL PN5 1061 1065 1068 1069 WO-1 3236 3236DC 3228 3228DC 3336 3336DC 3328 3328DC OB2 3032 10811312 10821312 94 3723 3726 3733 3734 1322 1411 1413 1428 1426 1431 1660-1 Description AIR EVACUATE MOBILE WASTE OIL DRAIN 3:1 STUB PUMP OIL, FLUID PUMP 3:1 RATIO WITH HO PUMP OILS/GEAR LUBE 3:1, 275/5 5:1 STUB PUMP PUMP LOWITH MED PRESS. OILS 5:1 W PUMP LOWITH MED PRESS OILS 5:1GAL GREASE PUMP 55:1, 400LB DRUM W SELF CONTAINED DISPENSING UNIT MOBILE OIL CADDY FOR 55G DRUM MOBILE GREASE SYSTEM FOR 400LB PORTABLE PRESS DISPENSER 20G TANK 1 IN DIAPHRAGM PUMP 1/2IN POLYPROPYLENE PUMP IMPULSE METER - QUARTS FLUID SOLENOID READY LITE Y STRAINER 1/2IN WASTE OIL SYSTEM BULK FLUID PACKAGE BULK FLUID PACKAGE DUAL CONTAINMENT BULK FLUID PACKAGE BULK FLUID PACKAGE DUAL CONTAINMENT BULK FLUID PACKAGE BULK FLUID PACKAGE DUAL CONTAINMENT BULK FLUID PACKAGE BULK FLUID PACKAGE DUAL CONTAINMENT HEAVY DUTY OIL BAR 2 SPIGOTS PORT CONTAINER SET GREASE DRUM PORT GEAR LUBE DRUM DELUXE BASE PORT ATF DRUM SET DELUXE BASE FOLLOWER PLATE F/120LB DRUM MOBILE WASTE OIL DRAIN-27 GAL. WASTE OIL SUCTION UNIT OIL DRAIN 18 GAL AIR EVACUATION OIL DRAIN 18 GAL PORTABLE GEAR LUBE DISPENSER LOW PRESSURE REEL 30FT X 3/8IN LOW PRESSURE REEL 40FT X 3/8IN MED PRESSURE REEL 30FT X 1/2IN MED PRESSURE REEL 40FT X 1/2IN HI PRESSURE REEL 30FT X 1/4IN HI PRESSURE REEL 40FT X 1/4IN 6-6 6-6 6-6 6-5 6-5 6-5 6-6 6-6 Page # 6-5 6-6
16-77
1-800-ROTUNDA
Item # 267-00047 267-00048 267-00049 267-00050 267-00051 267-00052 267-00053 267-00054 267-00055 267-00056 267-00057 267-00058 267-00059 267-00060 267-00061 267-00062 267-00063 267-00064 267-00065 267-00066 267-00067 267-00068 267-00069 267-00070 267-00071 267-00072 267-00073 267-00074 267-00075 267-00076 267-00077 267-00078 267-00079 267-00080 267-00081 267-00082 267-00083 267-00084 267-00089 267-00090 267-00091 267-00092 267-00093 267-00094 267-00095 Model # 1660 1674 1680 1713 1715 1728 1757 1733 1734 1115 1171 1134 2161 2162 2165 2199 1393 1395 1390 1389 812 822 833 845 870 883 2088 2074 2083 2077 955 957 970 976 940 OA1 1240 1243 3216 3223 3223DC 3333 3333DC 3250 3250DC Description REEL AIR/WATER 3/8"X50' 300PSI REEL MOTOR/GEAR OIL ATF 1/2"X5 REEL GREASE 1/2"X50' 5000PSI ENCL LOW PRES REEL 30FTX3/8IN ENCLOSED AIR REEL 3/8IN X 40FT ENCL LOW PRES REEL 30FTX1/2IN ENCL MED PRES REEL 40FTX1/2IN ENCL HI PRES REEL 30FTX1/4IN ENCL HI PRES REEL 40FTX1/4IN
www.fordrotunda.com
Page #
CONTROL HANDLE, HI-PRESSURE, G MED PRES FLUID HNDLE RIGID MED PRES FLUID HNDLE FLX HOSE ELEC METER/QUARTS/RIDGID OUTLE ELEC METERED HANDLE ELEC METER/QUARTS/FLEX-HOSE ELEC PRE-SET METER 3 REEL MOUNTING CHANNEL 5 REEL MOUNTING CHANNEL CHANNEL MOUNTING BRACKET I-BEAM MOUNTING BRACKET INLET HOSE FOR ENCLOSED REEL 1/2IN INLET HOSE 3000PSI 3/8IN INLET HOSE 3000PSI INLET HOSE FOR REEL 1/2IN 1/4IN INLET HOSE 5000PSI INLET HOSE FOR HP GREASE REEL 1/2IN SHUT OFF VALVE LOW PRES 1/2IN SHUT OFF VALVE MED PRES 3/4IN SHUT OFF VALVE MED PRES 1/2IN SHUT OFF VALVE HIGH PRES 1/4IN MINI-FILTER REG WITH GAUGE 3/8IN FILTER REG WITH GAUGE PRESSURE REGULATOR 1/4IN 1/2IN AIR REGULATOR & GAUGE QUICK AIR COUPLING 1/2IN AUTO AIR SHUT OFF SYSTEM LEVER ACTION HAND BARREL PUMP LEVER HND BAR PMP VITON SEAL BULK FLUID DISPENSING PACKAGE - 140 GALLON 230 GAL. CUBET TANK AND FRAME ONLY 230 GAL. CUBET TANK AND FRAME WITH CONTAINMENT 330 GAL. CUBET TANK AND FRAME ONLY 330 GAL. CUBET TANK AND FRAME WITH CONTAINMENT 230 GAL. CUBET TANK WITH PUMP 230 GAL. CUBET WITH CONTAINMENT AND OIL PUMP 6-6 6-6 6-6
16-78
1-800-ROTUNDA
Item # 267-00096 267-00097 267-00098 267-00099 267-00100 267-00101 267-00102 267-00103 267-00104 267-00105 267-00106 267-00107 267-00108 267-00109 267-00110 267-00111 267-00112 267-00113 267-00114 267-00115 267-00116 267-00117 267-00118 267-00119 267-00120 267-00121 267-00122 267-00123 267-00124 Item # 284-00001 284-00002 284-00003 284-00004 284-00005 284-00006 284-00007 284-00008 284-00009 284-00010 284-00011 284-00012 284-00013 284-00014 Model # 3350 3350DC 1063 360160 1417 1417 3214 3214DC 3216DC 3234 3234DC 3334 3334DC 3797 3797-0 381000IMS 506 101 506 121 506 122 506 202 506 222 506 503 506 300 506 321 379710 550357F 550004F 550367F 680302 Model # V508-400-02 L202-400-07 L275-075-01 L275-085-01 L164-400-03 L202-280-06 L202-280-07 L164-280-03 L206-280-08 L206-400-08 V270-075-01 L207-280-01 L207-400-01 L508-280-03 Description 330 GAL. CUBET WITH OIL PUMP
www.fordrotunda.com
Page #
330 GAL. CUBET WITH CONTAINMENT AND OIL PUMP THERMAL RELIEF VALVE 6/2 HOSE REEL STAND W/ WORKBENCH 40FT X 1/2IN HOSE REEL - LOW PRESSURE 30FT X 1/2IN HOSE REEL - LOW PRESSURE 140 gal. Cubet Tank Package with Pump & Meter 140 gal. Cubet Tank Dual Contain. Pump & Meter 140 gal. Tank Dual Contain. Pump Meter Reel 230 gal. Cubet Tank Package with Pump & Meter 230 gal. Cubet Tank w/Dual Contain. Pump & Meter 330 gal. Cubet Tank Package with Pump & Meter 230 gal. Tank Package w/Dual Contain. Pump Meter EVACU Master Centralized Used Oil Evacuation System EVACU Master Centralized Used Oil Evac. Sys w/o pedestal Fluid Managmnt Inventory Sys - Must call Rotunda for quote Aluminum Air/Water Hose Reel 30' x 3/8 Aluminum Air/Water Hose Reel 50' x 3/8 Aluminium Air/Water Hose Reel 50' x 1/2 Aluminum Oil Reel 30' x 1/2 1500 psi Aluminum Oil Reel 50' x 1/2 1500 psi Aluminum Waste Oil Suction Reel 20' x 3/4 Aluminum Grease Reel 30' x 1/4 5000 psi Aluminum Grease Reel 50' x 3/8 4000 psi EvacMaster Wall Mount DEF 55 Gallon Drum Dispensing System - Air Operated DEF 275Gal IBC Tote Dispensing Sys.w/30' Reel-Air Operated DEF 275 Gallon IBC Tote Dispensing System - Air Operated DEF Add-On Inline Filter - 10 Micron - Samson Description TRUCK BALANCING ADAPTOR SYSTEM CenTor Adaptor Plate, Set 2 of 2, 40mm Dia. Shaft CenTor Stud, Style 'B', Qty 1, (75mm long) CenTor Stud, Style 'A', Qty 1, (85mm long) Precision Collet 3 Deg ULA 86.8mm pilot dia. (40mm shaft) CenTor Adaptor Plate, Set 1 of 2, 28mm Dia. Shaft CenTor Adaptor Plate, Set 2 of 2, 28mm Dia. Shaft Precision Collet 3 Deg ULA 86.8mm pilot dia. (28mm shaft) CenTor Adaptor Plate, 6x135mm, 28mm Dia. Shaft CenTor Adaptor Plate, 6x135mm, 40mm Dia. Shaft CenTor Stud (Bolted) Style B, 1pc. CenTor Adaptor Plate, 7x150mm, 28mm Dia. Shaft CenTor Adaptor Plate, 7x150mm, 40mm Dia. Shaft CenTor Balancing Adaptor System, 6x135mm, 28mm Dia. Shaft Page # 6-5 6-5 6-6 6-6 6-6 6-6 6-6
16-79
1-800-ROTUNDA
Item # 284-00015 284-00016 284-00017 284-00018 284-00019 284-00020 288 ENERGYLOGIC Item # 288-00001 288-00002 288-00003 288-00004 288-00005 288-00006 288-00007 288-00008 288-00009A8 288-00009B8 288-00009C8 288-00010D8 288-00010A10 288-00010B10 288-00010C10 288-00010D10 288-00011A12 288-00011B12 288-00011C12 288-00011D12 288-00012A14 288-00012B14 288-00012C14 288-00012D14 288-00013A16 288-00013B16 288-00013C16 288-00013D16 288-00014A18 288-00014B18 288-00014C18 288-00014D18 288-00015A20 288-00015B20 288-00015C20 288-00015D20 288-00016A24 Model # EL-140H EL-200H EL-340H EL-200B EL-375B EL-500B 13002130 03250101 06000298 06000299 06000300 06000301 06000302 06000303 06000304 06000305 06000306 06000307 06000308 06000309 06000310 06000311 06000312 06000313 06000314 06000315 06000316 06000317 06000318 06000319 06000320 06000321 06000322 06000323 06000324 06000325 06000326 Description 140,000 BTU USED-OIL FURNACE 200,000 BTU USED-OIL FURNACE 340,000 BTU USED OIL FURNACE 200,000 BTU USED-OIL BOILER 375,000 BTU USED-OIL BOILER 499,000 BTU USED-OIL BOILER ENL13002130 Model # L508-400-03 L508-280-05 L508-400-05 L202-400-06 L508-400-04 L508-280-04 Description
www.fordrotunda.com
Page #
CenTor Balancing Adaptor System, 6x135mm, 40mm Dia. Shaft CenTor Balancing Adaptor System, 7x150mm, 28mm Dia. Shaft CenTor Balancing Adaptor System, 7x150mm, 40mm Dia. Shaft CenTor Stud, Style 'A', Qty 1, (85mm long) CenTor Balancing Adaptor System for 40mm Dia. Shaft CenTor Balancing Adaptor System for 28mm Dia. Shaft Page # 7-13 7-13 7-13 7-13 7-13 7-13 7-13 7-13
STANDARD 250 GALLON WORKBENCH STORAGE TANK 8 FT Airvolution XL, 1 HP - 120v HVLS Fan 8 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 8 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 8 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 10 FT Airvolution XL, 1 HP - 120v HVLS Fan 10 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 10 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 10 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 12 FT Airvolution XL, 1 HP - 120v HVLS Fan 12 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 12 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 12 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 14 FT Airvolution XL, 1 HP - 120v HVLS Fan 14 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 14 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 14 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 16 FT Airvolution XL, 1 HP - 120v HVLS Fan 16 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 16 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 16 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 18 FT Airvolution XL, 1 HP - 120v HVLS Fan 18 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 18 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 18 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 20 FT Airvolution XL, 1 HP - 120v HVLS Fan 20 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 20 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 20 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 24 FT Airvolution XL, 1 HP - 120v HVLS Fan
16-80
1-800-ROTUNDA
Item # 288-00016B24 288-00016C24 288-00016D24 288-00017B20 288-00017C20 288-00017D20 288-00018B24 288-00018C24 288-00018D24 288-00019S16 288-00019S18 288-00019S20 288-00020C16 288-00020C18 288-00020C20 288-00021 288-00022 288-00023 288-00024 292 TEMPO Item # 292-00002 292-00003 292-00004 292-00005 296 AMH CANADA LTD Item # 296-00001 296-00002 296-00003 296-00006 296-00007 296-00008 297 COOPER LIGHTING Item # 297-90000 300 ISN Item # 300-ALC77781E 300-ALC77782E 300-ALC77783E 300-ALC77785E 300-ALC78030E Model # 77781 77782 77783 77785 78030 Description VAN STAND 4' X 16_W x 18_H BUMPER STAND DOLLY PICK-UP BED Model # CUSTLIGHTING-PACKAGE Description Model # 28.SPT4000E 28.SPT4000S 28.SPT8000S 28.CPS825 28.cps783 28.cps823 Description Model # FM3000 FM2200 FM2100 FM3200 Description Model # 06000327 06000328 06000329 06000330 06000331 06000332 06000333 06000334 06000335 06000336 06000337 06000338 06000339 06000340 06000341 06000342 1140103 1200104 3140104 Description
www.fordrotunda.com
Page #
24 FT Airvolution XL, 1 HP - 240v single phase HVLS Fan 24 FT Airvolution XL, 1 HP - 240v 3 phase HVLS Fan 24 FT Airvolution XL, 1 HP - 480v 3 phase HVLS Fan 20 FT MaxAir XL, 1.5 HP - 240v single phase HVLS Fan 20 FT MaxAir XL, 1.5 HP - 240v three phase HVLS Fan 20 FT MaxAir XL, 1.5 HP - 480v three phase HVLS Fan 24 FT MaxAir XL, 2 HP - 240v single phase HVLS Fan 24 FT MaxAir XL, 2 HP - 240v three phase HVLS Fan 24 FT MaxAir XL, 2 HP - 480v three phase HVLS Fan 16 FT MacroVoltaic, .5 HP DC HVLS Fan 18 FT MacroVoltaic, .5 HP DC HVLS Fan 20 FT MacroVoltaic, .5 HP DC HVLS Fan 16 FT SPEC-1, 1.5 HP 240v 3 phase HVLS Fan 18 FT SPEC-1, 1.5 HP 240v 3 phase HVLS Fan 20 FT SPEC-1, 1.5 HP 240v 3 phase HVLS Fan Power Supply - back-up for MacroVoltaic Fan 140K BTU Waste Oil Furnace w/250 Gal. Tank Complete System 200K BTU Waste Oil Furnace w/250 Gal. Tank Complete System 340K BTU Waste Oil Furnace w/250 Gal. Tank Complete System 7-23 7-13 7-13 7-13 Page #
30 GAL HAND OPERATED FUEL TANKER, PUMPS 7 GAL PER MINUTE. 100 GAL AIR OPERATED FUEL TANKER, PUMPS 10 GAL/MINUTE, FOR GAS FUEL 100 GAL, HAND PUMP , FOR GAS FUEL 30 GAL, AIR OPERATED, PUMPS 10 GAL/MINUTE Page #
SPECTRATEK 4000S 4KW. 220V 1PH Economy SPECTRATEK 4000S 4KW. 220V w/Sensor system SPECTRATEK 8000S 8KW. 220V 1PH COMPUSPOT 825 HF INVERTER SPOT WELDER CompuSpot 750HF Liquid Cooled Inverter Welder CompuSpot 800HF Liquid Cooled Inverter Welder Page #
BUMPER STAND DELUXE 180 DEGREE SWIVEL XXX PAIL TIPPER SINGLE 5 GALLON
16-81
1-800-ROTUNDA
Item # 300-AST1770E 300-BEN5155097E 300-BUF7502GTE 300-BUF7503GE 300-BUF7503GYTE 300-BUF7503NE 300-BUF7550GTE 300-BUF925GTE 300-BUFTP-1E 300-BUFTP-2E 300-BUFTP-4E 300-CEN13003E 300-CEN6202E 300-CEN6425AE 300-CEN6427E 300-CEN6450E 300-CEN6459E 300-CRU11AFLT250E 300-CRU11AFLT300E 300-CRU16LDF25E 300-CRU16LRY25E 300-CRU16LRY30E 300-CRU17AF300E 300-CRU17AF475E 300-CRU17ARA250E 300-CRU19MADF30E 300-CRU2000010E 300-DWTDW756E 300-DWTDW758E 300-EQLLB779-2 300-EZRMS4000E 300-EZX70002E 300-EZX70004E 300-EZX70008E 300-EZX70008LE 300-EZX70016E 300-EZX70016LE 300-EZX70032E 300-EZX70032LE 300-HERG200E 300-HERG202E 300-HERG510E Model # 1770 5155097 7502GT 7503G 7503GYT 7503N 7550GT 925GT TP-1 TP-2 TP-4 13003 6202 6425A 6427 6450 6459 11AFLT250 11AFLT300 16LDF25 16LRY25 16LRY30 17AF300 17AF475 17ARA250 19MADF30 2000010 DW756 DW758 LB779 MS4000 70002 70004 70008 70008L 70016 70016L 70032 70032L G200 G202 G510 Description Deluxe Air Windshield Knife RS500 SPRAY WASH CABINET
www.fordrotunda.com
Page #
7-1/2" SELF CENTERING BUFFING PAD 7-1/2" BUFFING PAD 7-1/2" SELF CENTERING BUFFING PAD (YELLOW) 7-1/2" BOLT-ON BUFFING PAD 7-1/2" YELLOW SELF CENTERING BUFFING PAD 9" SELF CENTERING BUFF FOAM PAD 3 PACK WOOL AND FOAM BUFFING PADS KIT TRIPAC NO. 2 WOOL AND FOAM BUFFING PAD KIT 7 PIECE MINI BUFFING PAD KIT Under Hood Light Disc Brake Micrometer 0.300 to 1.300 Digital Readout Caliper Dial Caliper Brake Rotor & Ball Joint Set Brake Rotor Gage 11ft 2.5in EXHAUST TUBING 11ft 3in EXHAUST TUBING 2.5 IN DOOR PORT - RUBBER 2 1/2in Y CONNECTOR 3in Y CONNECTOR STRAIGHT TAILPIPE ADAPTER UP TO 2-1/2_ OVAL 3_X6_ TAILPIPE ADAPTER BELL W/SNAPS TAILPIPE ADAPTER FITS 2-1/2 TO 3-1/2_ 3IN DOOR PORT - ALUMINUM VACUUM HOSE 2_ X 10' Heavy Duty 6" Bench Grinder 8" Bench Grinder THE PUMPER Qty (2) Self Contained Memory Saver 2OZ. TOUCH UP BOTTLES 50/BOX 1/4 PINT DISPOSABLE MIXING CUPS 400/BOX 1/2 PINT DISPOSABLE MIXING CUPS 100/BOX 1/2 PINT LIDS 100/BOX 1 PINT DISPOSABLE MIXING CUPS 100/BOX 1 PINT LIDS 100/BOX 1 QUART DISPOSABLE MIXING CUPS 100/BOX 1 QUART LIDS 100/BOX 2 GUN WASHER - DIAM PUMP & TIMER WATERBORNE COMPATIBLE 2 GUN 2 CUP SPRAY GUN WASHER MANUAL WATERBORNE PAINT GUN WASHER
16-82
1-800-ROTUNDA
Item # 300-HSA1001E 300-HSA1002E 300-HSA1004E 300-HSA1007E 300-HSA1045E 300-HSA1080E 300-HSA1095E 300-HSA2120E 300-HSA3001SE 300-HSA4500E 300-HSA5500E 300-HSA9000E 300-HSADK1000E 300-HUCAK175AE 300-HUCPR75E 300-JLM1000E 300-JLM1500E 300-JLM20014E 300-JLM20015E 300-jlm20017E 300-JLMD12-1-25E 300-MAR30204E 300-MAR30207E 300-MASHG501AE 300-MASHG751BE 300-MASMT51E 300-MASUT100SIE 300-MECMG-05-600E 300-MEGW4000E 300-MEGW64E 300-MEGW65E 300-MEGW7000E 300-MEGW7006E 300-MEGW8000E 300-MEGW8006E 300-MEGW9000E 300-MEGW9006E 300-MMM1318E 300-mmm1396E 300-mmm1397E 300-mmm1398E 300-mmm1406E 300-mmm1407E Model # 1001 1002 1004 1007 1045 1080 1095 2120 3001S 4500 5500 9000 DK1000 AK175A PR75 1000 1500 20014 20015 20017 D12-1-25 30204 30207 HG501A HG751B MT51 UT100SI MG-05-600 W4000 W64 W65 W7000 W7006 W8000 W8006 W9000 W9006 1318 1396 1397 1398 1406 1407 Description STUDS PULL 500/BX STUDS PULL HD 500/BX
www.fordrotunda.com
Page #
STUD WELDING TIP FOR ALL GUNS SHRINK TIP ELIMINATOR SIDE-BY-SIDE ADAPT KIT W/STUD EASE TECH PULLER MULTIPLE STUD PULLER MINI STUD UNI-WIRE DELUXE KIT UNI SPARKER WELDER STUD STARTER KIT WELDER STUD STINGER KIT WELDER STUD DELUXE KIT DENT KILLER-DENT PULLING ATTACHMENT Air Power Riveter PLASTIC RIVET GUN W/O RIV WELDER STUD STARTER KIT WELDER STUD KIT WELDING STUDS 2.0MM 500BAG WELDING STUDS 2.5MM 500BAG STUD PULLER T-TYPE 25PK FILTER AIR IN LINE COUNTER DISPLAY JAR 25PK LG WHEEL MASKERS PLASTIC SHEETING 12ft X 400ft 500-750 DEGREE HEAT GUN 750-1000 DEG MAST HEATGUN Pocket Torch SELF-IGNITING ULTRA TORCH Apron Black 8' CUT 'N SHINE WOOL PAD 6.5" ROTARY BUFFER BACKING PLACE 8" ROTARY BUFFER BACKING PLATE 8" SOFTBUFF FOAM CUTTING PAD 6.5" SOFTBBUFF FOAM CUTTING PAD 8" SOFTBUFF FOAM POLISHING PAD (ROTARY APPLICATION) 6.5" SOFTBUFF FOAM POLISHING PAD (D/S POLISHER APPLICATION) 8" SOFTBUFF FOAM FINISHING PAD (ROTARY APPLICATION) 6.5" SOFTBUFF FOAM FINISHING PAD (D/A POLISHER APPLICATION) FINISHING FILM DISCS STIKIT P1200 6IN 100PK DISC ROLOC 50GR 2 25/BX GREEN DISC ROLOC 36GR 2 25/BX GREEN DISC ROLOC 24GR 2 25/BX GREEN DISC ROLOC 50GR 3 25/BX GREEN DISC ROLOC 36GR 3 25/BX GREEN
16-83
1-800-ROTUNDA
Item # 300-mmm1408E 300-MMM1434E 300-MMM1435E 300-MMM1437E 300-MMM1438E 300-MMM1439E 300-MMM1443E 300-MMM1506E 300-MMM1549E 300-MMM16400E 300-MMM1914E 300-MMM1915E 300-MMM1922E 300-MMM1923E 300-MMM1989E 300-MMM1991E 300-MMM2002E 300-MMM2003E 300-MMM2004E 300-MMM2005E 300-MMM2007E 300-MMM2014E 300-MMM2021E 300-MMM2022E 300-MMM2023E 300-MMM2035E 300-MMM2036E 300-MMM2037E 300-MMM2038E 300-MMM2039E 300-MMM2040E 300-MMM2043E 300-MMM2044E 300-MMM2118E 300-MMM2590E 300-MMM2591E 300-MMM2594E 300-MMM2595E 300-MMM2597E 300-MMM2599E 300-MMM2601E 300-MMM2602E 300-MMM2604E 300-MMM26334E 300-MMM26336E Model # 1408 1434 1435 1437 1438 1439 1443 1506 1549 16400 1914 1915 1922 1923 1989 1991 2002 2003 2004 2005 2007 2014 2021 2022 2023 2035 2036 2037 2038 2039 2040 2043 2044 2118 2590 2591 2594 2595 2597 2599 2601 2602 2604 26334 26336 Description
www.fordrotunda.com
Page #
DISC ROLOC 24GR 3 25/BX GREEN GOLD DISC ROLLS STIKIT P400 6IN 175/ROLL GOLD DISC ROLLS STIKIT P320G 6IN 175/ROLL GOLD DISC ROLLS STIKIT P240G 6IN 175/ROLL GOLD DISC ROLLS STIKIT P220G 6IN 175/ROLL GOLD DISC ROLLS STIKIT P180G 6IN 175/ROLL GOLD DISC ROLLS STIKIT P80G 6IN 125/ROLL GREEN FRE-CUT DISC ROLLS STIKIT 80D 6IN 10/CASE PRODUCTION DISCS STIKIT GREEN CORPS 80D 8IN 50/BX PPS SUN GUN COLOR MATCHING LIGHT KIT & ACCESSORIES FIBRE DISCS GREEN CORPS 5_ X 7/8_ 36G 20/BOX FIBRE DISCS GREEN CORPS 5_X 7/8_ 24G 20/BOX FIBRE DISCS GREEN CORPS 7_X 7/8_ 36G 20/BOX FIBRE DISCS GREEN CORPS 7_X 7/8_ 24G 20/BOX 5pk CUTOFF WHEELS 3-1/32IN X 3/8IN 5PK 5PK CUT OFF WHEELS 3 X3/16-3/8 ARB 5/PK PAPER SHEETS WETORDRY TRIMITE 9_X 11_ 400A 50/SL PAPER SHEETS WETORDRY TRIMITE 9_X 11_ 360A 50/SL PAPER SHEETS WETORDRY TRIMITE 9_X 11_ 320A 50/SL WET/DRY TRI-M-ITE PPR SHTS 9X11 50 SHEETS/SLEEVE PAPER SHEETS WETORDRY TRIMITE 9_X11_ 220A 50/SL PAPER SHEETS WETORDRY TRIMITE 9_X 11_ 180C 50/SL PAPER SAND IMP 1000 ULTRA FINE 5 1/2X 9 50/SL PAPER SAND IMP 1200 MICRO FINE 5 1/2X 9 50/SL PAPER SAND IMP 1500 MICRO FINE 5 1/2X 9 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P800 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P600 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P500 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P400 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P360 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P320 50/SL PAPER SHEETS IMPERIAL WETORDRY 9_X 11_ P220 50/SL PAPER SAND IMP 2000 MICRO FINE 5 1/2X 9 50/SL PAPER SHEETS PRODUCTION 9_X 11_ 40D 50/SL SHEET ROLLS STIKIT GOLD 2-3/4_X45 YARDS P400 SHEET ROLLS STIKIT GOLD 2-3/4_X45 YARDS P320 10/RL SHEET ROLLS STIKIT GOLD 2-3/4_X45 YARDS P220 SHEET ROLLS STIKIT GOLD 2-3/4_X45 YARDS P180 SHEET ROLLS STIKIT GOLD 2-3/4_X30 YARDS P120 SHEET ROLLS STIKIT GOLD 2-3/4_X25 YARDS P80 SPONGE SHEETS SOFTBACK 4-1/2_X5-1/2_ U-FINE 20/BX SPONGE SHEETS 20/BX SOFTBACK 4-1/2_X5-1/2_ S-FINE SPONGE SHEETS SOFTBACK 4-1/2_X5-1/2_ FINE 20/BX MASKING TAPE 233+ 3/4x60YD 48/CS MASKING TAPE 233+ 1IN X 60YDS 24CS
16-84
1-800-ROTUNDA
Item # 300-MMM26338E 300-MMM26340E 300-MMM5701E 300-MMM5703E 300-MMM5705E 300-MMM5710E 300-MMM5711E 300-MMM5713E 300-MMM5725E 300-MMM5726E 300-MMM5860E 300-MMM5861E 300-MMM6297E 300-MMM6298E 300-MMM6300E 300-MMM6301E 300-MMM6303E 300-MMM6306E 300-MMM6347E 300-MMM6348E 300-MMM6349E 300-MMM6377E 300-MMM6378E 300-MMM6380E 300-MMM6381E 300-MMM6382E 300-MMM6383E 300-MMM6384E 300-MMM6385E 300-MMM6404E 300-MMM6405E 300-MMM6408E 300-MMM6409E 300-MMM6538E 300-MMM6539E 300-MMM6540E 300-mmm6541E 300-mmm6542E 300-MMM6543E 300-MMM6727E 300-MMM6728E 300-MMM6732E 300-MMM6742E 300-MMM6975E 300-mmm7450E Model # 26338 26340 5701 5703 5705 5710 5711 5713 5725 5726 5860 5861 6297 6298 6300 6301 6303 6306 6347 6348 6349 6377 6378 6380 6381 6382 6383 6384 6385 6404 6405 6408 6409 6538 6539 6540 6541 6542 6543 6727 6728 6732 6742 6975 7450 Description
www.fordrotunda.com
Page #
MASKING TAPE 233+ 1 1/2 x 60 YD 16/CS MASKING TAPE 233+ 2 X 60 YD 12/CS 9" SUPERBUFF 2 PLUS 2 PAD SUPERBUFF III BUFFING PAD 9" SUPERBUFF POLISHING PAD SUPERBUFF ADAPTOR 9" HOOLIT PLUS COMPOUNDING PAD 9" HOOKIT POLISHING PAD 8" PERFECT-IT FOAM POLISHING PAD 3" PERFECT-IT HOOKIT POLISHING PAD DRY GUIDE COAT CARTRIDGE & KIT 50 GRAM DRY GUIDE COAT CARTRIDGE & KIT 50 GRAM 6/CASE TAPE SOFT EDGE FOAM MASKING 1/2_ 54.6 YDS TAPE SOFT EDGE FOAM MASKING 3/4_ 27.3YDS LINE TAPE FINE SCOTCH 1/8_ X 60YDS 1EA LINE TAPE FINE SCOTCH 1/4_ X 60YDS 1EA LINE TAPE FINE SCOTCH 1/2_ X 60YDS 1EA LINE TAPE FINE SCOTCH 1/16_ X 60YDS 1EA TAPE TRIM MASKING 2IN X 10.94 YDS 7MM HB TAPE TRIM MASKING 2IN X 10.94 YDS 15MM HB MASKING TAPE TRIM 2IN X 10.94 YDS 10MM HB FOAM DOUBLE SIDED TAPE 1/2 X 20YD (GRAY) FOAM DOUBLE SIDED TAPE 7/8 X 20YD (GRAY) 12/CS FOAM DOUBLE SIDED TAPE 1/2 X 20YD (WHITE) FOAM DOUBLE SIDED TAPE 7/8 X 20YD (WHITE) FOAM DOUBLE SIDED TAPE 1/2 X 20YD (BLACK) FOAM TAPE SCOTCH ACRYLIC 7/8_X 20YDS BOXED GRAY FOAM TAPE-ACRYLIC GRAY 1/2_ X 5YDS 1.2MM 12/CASE REPAIR TAPE NAMEPLATE SCOTCH .23_X 5YDS GRAY 1EA PLASTIC TAPE 1/8_ BLUE #471 TAPE PLASTIC BLUE 1/4IN X 36YDS #471 TAPE PLASTIC BLUE 1/2IN X 36YDS #471 PLASTIC TAPE 3/4_ BLUE #471 3RLS MASKING PAPER WHITE 12_ X 750 2RL MASKING PAPER WHITE 18_ X 750 FT 2 ROLL PACK MASKING PAPER WHITE 36_ X 750 FT MASKING TAPE #2727 3/4 X 60YDS 48CS MASKING TAPE #2727 1 1/2 X 60YDS 24CS MASKING TAPE #2727 2IN X 60YDS 24CS OVERSPRAY PROTECTIVE SHEETING 12' X 400FT 1ROLL/CS OVERSPRAY PROTECTIVE SHEETING 16' X 400FT 1ROLL/CS MASKING PAPER SCOTCHBLOK 12_ X 180 FT OVERSPRAY PROTECTIVE SHEETING 20X250_ (BUMPER REP) DUCT TAPE TARTAN SILVER #3939 2IN 60YDS 24/CASE VELCRO 4_ CS 10/BG BROWN
16-85
1-800-ROTUNDA
Item # 300-mmm7451E 300-mmm7455E 300-mmm7482E 300-mmm7483E 300-mmm7486E 300-MMM7521E 300-MMM7522E 300-mmm7524E 300-mmm7525E 300-mmm7526E 300-mmm7527E 300-mmm7528E 300-mmm7529E 300-mmm7542E 300-mmm7543E 300-mmm7747E 300-MMM85078E 300-MSC58531E 300-MSC69000E 300-MSC69100E 300-MSC81048E 300-MSC90059E 300-MSC90062-AE 300-MSC90066-AE 300-MSC90066E 300-MSC91580AE 300-MSC98210AE 300-OTC1503AE 300-OTC1504AE 300-OTC1505BE 300-OTC1532E 300-OTC1572E 300-OTC1585AE 300-OTC1595E 300-OTC1676 300-OTC1723E 300-OTC1725E 300-OTC1728E 300-OTC1735A 300-OTC1750AE 300-OTC1758E 300-OTC1770-A 300-OTC1773CE 300-OTC1805 300-OTC1806 Model # 7451 7455 7482 7483 7486 7521 7522 7524 7525 7526 7527 7528 7529 7542 7543 7747 85078 58531 69000 69100 81048 90059 90062-A 90066-A 90066 91580A 98210A 1503A 1504A 1505B 1532 1572 1585A 1595 1676 1723 1725 1728 1735A 1750A 1758 1770-A 1773C 1805 1806 Description
www.fordrotunda.com
Page #
VELCRO MEDIUM 4IN MAROON 10BX VELCRO 3_ CS 25/BG BROWN DISC ROLOC 4 CS 10/BG DISC ROLOC 4 MD 10/BX DISC ROLOC 3 MD 25/BG RED SHEET ROLLS ABRASIVE GENERAL PURPOSE MAROON\PURPLE SCOTCH-BRITE ABRASIVE SHEETS UTRA-FI 60ROLL ROLOC BRIS 50GR 2_ 10/BOX GREEN DISC ROLOC BRIS 80GR 2_ 10/BOX YELLO DISC ROLOC BRIS 50GR 3_ 10/BOX GREEN DISC ROLOC BRIS 80GR 3_ 10/BOX YELLO DISC ROLOC BRIS 120GR 2IN 10/BOX WHITE DISC ROLOC BRIS 120GR 3IN 10/BOX WHITE DISCS RADIAL BRISTLE 3_ 50 GRADE DISCS RADIAL BRISTLE 3_ 80 GRADE PRIMER PREP SCUFF- 4.75_ X 15' MAROON 3/CASE 3" FINESSE3" FINESSE-IT KNIT BUFFING PAD R-134A Valve Core Remover and Installer MSC58531 Refrigerant Recovery System A/C COMPLETE RECOVERY SYSTEM W/30LB DOT TANK A/C SEALANT REMOVER ADAPTER KIT 1.5 CFM Deep Vacuum Pump 3.0 SINGLE STAGE DEEP VACUUM PUMP 6.0 CFM SINGLE STAGE DEEP VACUUM PUMP 5 CFM ROTARY VANE VACUUM PUMP XXX VACUUM / CHARGING STATION ELECTRONIC CHARGING SCALE W/LEVEL 2 1/2 TON SERVICE JACK 3 TON SERVICE JACK 5 TON SERVICE JACK 2 TON ALUMINUM RACING JACK CAR DOLLY (PAIR) POWER TRAIN LIFT 2500LB CAPACITY POWER TRAIN LIFT PULLER SET ENGINE SUPPORT BAR, 2 POINT ENGINE SUPPORT BAR, 3 POINT 1000 AIR ASSISTED TRANSMISSION JACK 1 TON REPAIR STAND 6000 LB. REVOLVER DIESEL ENGINE STAND FUEL TANK HANDLER FOR 014-01525 WHEEL DOLLY RATCHET STYLE JACK STANDS 2000# POSITIONING SLINGS 4,000# CAPACITY SLING 8-15 8-15 8-13 8-20 8-20 8-20 8-20 8-18 8-13 8-13
16-86
1-800-ROTUNDA
Item # 300-OTC1819E 300-OTC1820E 300-OTC1821 300-OTC1825E 300-OTC1833E 300-OTC1880E 300-OTC1881E 300-OTC1896 300-OTC3131AGM 300-OTC3135 300-OTC5039 300-OTC5078E 300-OTC5202E 300-OTC5203E 300-OTC60796 300-OTC6582E 300-OTC6583 300-OTC6584 300-OTC6591 300-OTC6592 300-OTC6650E 300-PLC6622-000 300-PLC6622-2550E 300-PLC6622-3000E 300-PLC6622-3502E 300-ROB15234E 300-ROB15434E 300-ROB15495E 300-ROB15500 300-ROB15600E 300-ROB16009E 300-ROB16345E 300-ROB16910E 300-ROB17492E 300-ROB17495E 300-ROB17686 300-ROB17800BE 300-ROB18190A 300-ROB18191A 300-ROB30036 300-ROB34102E 300-ROB34288 300-ROB34430E 300-ROB34724E Model # 1819 1820 1821 1825 1833 1880 1881 1896 3131AGM 3135 5039 5078 5202 5203 60796 6582 6583 6584 6591 6592 6650 300-PLC6622-000 6622-2550 6622-3000 6622-3502 15234 15434 15495 15500 15600 16009 16345 16910 17492 17495 17686 17800B 18190A 18191A 30036 34102 34288-PRO 34430 34724 Description
www.fordrotunda.com
Page # 8-18 8-18 7-12 7-12 7-12 7-12 12-2
2,200# FLOOR CRANE, FOLD AWAY 4,400# FLOOR CRANE, FOLD AWAY 10 Ton Capacity Oil Filter Crusher 17-1/2 TON SHOP PRESS 25 TON SHOP PRESS 17-.5 TON CAPACITY PRESS ACCESSORY SET 25-TON ACCESSORY SET 25 Ton Capacity High Speed HD Filter Crusher MINUTEMAN PLUS BATTERY & ELECTRICAL SYSTEM TESTER MINUTEMAN PLUS PRINTER CHARGED AIR COOLER TESTER 2000LB HIGH LIFT TRANSMISSION JACK 2 TON SERVICE JACK 3 TON SERVICE JACK DRIP PAN (ABS MATERIAL) STRUTAMER STAND BRIDGE ACCESSORY FORD STRUT REMOVAL TOOL Strut Tamer Extreme Strut Tamer Extreme With Stand MAGNETIC INDUCTION HEATING SYSTEM PolarCool Zone 11K Portable Evaporative Cooling Fan 36_ EVAP COOLING FAN SINGLE SPEED 18 INCH VARIABLE SPEED FAN 48_ EVAP COOLING FAN SINGLE SPEED PUMP VAC A/C R12 & 134A ELEC 1.2CFM 4 CFM VACUUM PUMP INLET TEE COMB R-12 R-134A 15400 VACUUM PUMP 110, 5 CFM, 2ND STAGE VACUUM PUMP 6CFM (ELECTRIC) DISCOVR R134A REFRIGERANT IDENTIFIER CORDLESS AND RECHARGEABLE TRUE UV LED LIGHT COOL TECH ID PLUS REFRIGERANT IDENTIFIER VINYL DUST COVER VINYL DUST COVER 50 LB. TANK WITH FLOAT SWITCH RECOV/RECYC/RECHG ALL REFRIGERANTS Low Side Blue Actuator Service Coupler for R-134A High Side Red Actuator Service Coupler for R-134A STANDARD A/C CHARGING HOSES - 3PK TANK A/C 30# R134a R134A REFRIGERANT RECOVERY RECYCLING & RECHARGE MA FILTER-DRIER 17400A&700A/34400&700 SPIN ON FILTER FOR ROB34700Z & ROB34788
16-87
1-800-ROTUNDA
Item # 300-ROB34750E 300-ROB34788 300-ROB34970E 300-ROB43678B 300-ROB62121 300-ROB62121E 300-ROB63096E 300-ROB75240E 300-ROB75700E 300-ROB92500E 300-ROBTIFZX 300-SAT12740 300-SAT9795 300-SOLES2500KEE 300-SOLES5000E 300-SOLES6000KEE 300-SOLJNC4000E 300-SST29050E 300-SST29052E 300-STC20350E 300-STC32900E 300-STC35660E 300-STC35800E 300-SUN5003E 300-UEIDTH31 300-VENHVPF30E 300-WIL676E 300-WIL745E 300-WIL746E 302 LOCK-N-STITCH Item # 302-00001 302-00002 302-00003 302-00004 302-00005 302-00006 302-00007 302-00008 302-00009 302-00010 Model # FTRITONSPK FFT514125L-10 FT4164CD FT4164CD-EXT FT5RPLT-1 FT5RPLTAB FT116EXD-1 FT116DT FT116XL FT116LDT Description Model # 34750 34788 34970 43678B 62121 62121 63096 75240 75700 92500 TIFZX 300-SAT12740 300-SAT9795 ES2500KE ES5000 ES6000KE JNC4000 29050 29052 20350 32900 35660 35800 5003 DTH31 HVPF30 676 745 746 Description TANK A/C 50# R134a
www.fordrotunda.com
Page # 2-1
RECYCLER CHARGE STATION R134A AIR VACUUM PUMP FOR R12 AND R134 5 POUND., 110V DIAL-A-CHARGE CHARGING CYLINDER 96" LONG ENVIRO-GUARD HOSE FOR AUTOMOTIVE R134A 96" LONG ENVIRO-GUARD HOSE FOR AUTOMOTIVE R134A 96" LONG ENVIRO-GUARD HOSE FOR AUTOMOTIVE R134A REFRACTOMETER COOLANT EXCHANGER TRANSMISSION FLUID EXCHANGER HEATED PENTODE HALOGEN LEAK DETECTOR SATA UBE Undercoating Gun SATA HRS Rust Protection Gun w/3 Wands BOOSTER PAK W/CHARGER Booster Pack HD w/ Charger 1500 Amp Booster Pack 3200 Amp JUMP-N-CARRY PORTABLE POWER SOURCE SLIDE SLEDGE 21LB 46IN HEAVY EQUIP BMF 1 TIP 2_ HEAVY EQUIP BMF 6 TIPS ALL PIN DRIVERS The Pro Step BIGEASY LOCKOUT TOOL KIT PAINT'N STICK (SIDE VIEW MIRROR HOLDER) BUMPER TREE 28in. High Bench Grinder Pedestal Stand DIGITAL PSYCHROMETER MAXX AIR 30_ PEDESTAL FAN 6-1/2in. Steel Vise 5in. Mechanic's Vise 6in. Mechanic's Vise
10-1 10-1
FORD TRITON SPARK PLUG THREAD REPAIR INSERT KIT 14MM ANODIZED ALUMINUM SPARK PLUG THREAD REPAIR INSERTS 41/64 PILOTED CORE DRILL FT4164CD EXTENSION TAP FOR 14MM SPARK PLUG THREAD REPAIR INSERT TAP ALIGNMENT BUSHING 1/16 INCH BY 6 INCH DRILL BIT 4 INCH DRILL TUBE 1/16 INCH BY 10.5 INCH DRILL BIT 8 3/4 INCH DRILL TUBE
16-88
1-800-ROTUNDA
Item # 302-00011 302-00012 302-00013 302-00014 302-00015 302-00016 302-00019 302-00020 302-00021 302-00022 302-00023 304 CURTIS-TOLEDO Item # 304-00001 304-00002 304-00003 304-00004 304-00005 304-00006 304-00008 304-00009 304-00010 304-00011 304-00012 304-00013 304-00014 304-00015 304-00016 304-00018 304-00019 304-00020 304-00022 304-00023 304-00024 304-00025 304-00026 304-00027 304-00033 304-00034 304-00035 304-00036 304-00037 304-00038 Model # 5E2VT8UP 7E2VT8UP-A2A 7E2VT8UP-29 7E2VT8UP-A3A 10HT12UP 10VT12UP CV9712UP CWT9814AUP 13E2GT3HE 13E2GT3K 5E2HTD12UP-29 7E2HTD12UP-29 5E2HTD12UP 7E2HTD12UP 10HTD12UP CVD9712UP CVD9814BUP CAF2308 RS15T RS20T RS25T RS30T RS40T RS50T CR-25 CR-35 CR-50 CR-75 CR-100 CR-150 Description Model # FT514125CC4V FT514125CCT FT5CC4VREM FT514125T FT5141254VT FT514125TT FTSPHCB FT5FCG FT54164AB L750-2 LHC623-20 Description TYPE 2 COUNTERBORE CUTTER TYPE 3 COUNTERBORE CUTTER FT514125CCT REMOVAL TOOL TYPE 1 INSTALLATION TOOL TYPE 2 INSTALLATION TOOL TYPE 3 INSTALLATION TOOL
www.fordrotunda.com
Page #
TRITON SPARK PLUG HOLE CLEANING BRUSH TRITON TYPE AND HEIGHT GAUGE CORE DRILL ALIGNMENT BUSHING Cutting Fluid for Triton Spark Plug Thread Kit Thread Locker/Sealant for Triton Spark Plug Thread Kit Page # 7-6 7-6 7-6 7-6 7-6 7-6 7-6
5HP 230V 1PH FULLY PACKAGED AIR COMP 7.5HP FULLY PACKAGED AIR COMP 220V 1PH 7.5HP FULLY PACKAGED AIR COMP 220V 1PH 7.5HP FULLY PACKAGED AIR COMP 208V/230/460 3PH 10HP 3PH FULLY PACKAGED AIR COMP 10HP 3PH FULLY PACKAGED VERTICAL AIR COMP 15HP PRESSURE LUBRICATED AIR COMPRESSOR 25HP PRESSURE LUBRICATED AIR COMP 13HP GAS DRIVEN PORTABLE AIR COMP . 13HP GAS DRIVEN PORTABLE AIR COMP . TWIN 5HP FULLY PACKAGED DUPLEX COMP . TWIN 7HP 1PH DUPLEX AIR COMP . 5HP 3PH DUPLEX AIR COMP . 7.5HP 3PH DUPLEX AIR COMP 10HP 3PH AIR DUPLEX AIR COMP . 15HP PRESSURE LUBRICATED DUPLEX COMP 25HP PRESSURE LUBRICATED DUPLEX COMP ON/OFF SWITCHES FOR DUPLEX COMP . (2) REQUIRED 15HP TANK MOUNTED ROTARY SCREW COMP . 20HP TANK MOUNTED ROTARY SCREW COMP . 25HP TANK MOUNTED ROTARY SCREW COMP . 30HP TANK MOUNTED ROTARY SCREW COMP . 40HP TANK MOUNTED ROTARY SCREW COMP . 50HP TANK MOUNTED ROTARY SCREW COMP . 25 CFM CAPACITY REFRIGERATED AIR DRYER 35 CFM CAPACITY REFRIGERATED AIR DRYER 50 CFM STANDARD REFRIGERATED AIR DRYER W/ 3/4IN NPT CONN. 75 CFM STANDARD REFRIGERATED AIR DRYER W/ 3/4IN NPT CONN. 100 CFM CAPACITY REFRIG. DRYER W/ 1IN NPT CONN. 150 CFM CAPACITY REFRIG. DRYER W/ 1IN NPT CONN.
16-89
1-800-ROTUNDA
Item # 304-00039 304-00040 304-00041 304-00042 304-00043 304-00044 304-00045 304-00046 304-00047 304-00048 304-00049 304-00050 304-00051 304-00052 304-00053 304-00054 304-00055 304-00056 304-00057 304-00058 304-00059 304-00060 304-00061 304-00062 304-00063 304-00064 304-00065 304-00066 304-00067 304-00068 304-00069 304-00070 304-00071 304-00072 304-00073 304-00074 304-00075 304-00076 304-00077 304-00078 304-00085 304-00086 304-00087 304-00088 304-00089 Model # CR-200 CHT-20 CHT-25 CHT-35 CHT-50 CHT-75 CHT-100 5E2VT8UP CF7-12-4-DPL CF7-16-4-DPL CF7-20-4-DPL CF7-28-8-DPL CF5-12-4-DPL CF5-16-4-DPL CF5-20-4-DPL CF5-24-8-DPL CF5-28-8-DPL CF5-32-12-DPL CVD-9815CUP CVD-9813CUP CWT-9815AUP CV8913UP P223E SE5 SE7.5 SE10 SE15 SE20 SE25 SE30 SE40 SE50 SE5TM SE7.5TM SE10TM SE15TM SE5TMRD SE7.5TMRD SE10TMRD SE15TMRD SE20TMRD SE25TMRD SE30TMRD 5E2HT8-1 5E2VT8-1 Description
www.fordrotunda.com
Page # 7-7 7-7 7-7 7-7 7-7 7-7 7-7 7-6 7-7 7-7 7-7 7-7 7-7 7-7 7-7 7-7 7-7 7-7 7-6 7-6 7-6 7-6 7-8 7-8 7-8 7-8 7-8 7-8 7-8 7-8 7-8
200 CFM CAPACITY REFRIG. DRYER W/ 1.5IN NPT CONN. 25 CFM HIGH TEMP . AIR DRYER 25 HIGH TEMP AIR DRYER 35 CFM HIGH TEMP AIR DRYER 50 CFM HIGH TEMP AIR DRYER 75 CFM HIGH TEMP AIR DRYER 100CFM HIGH TEMP . AIR DRYER 5HP 3PH 80 GAL AIR COMPRESSOR 1 MICRON Air Line Filter 1/2 NPT 20SCFM 1 MICRON Air Line Filter 1/2 NPT 35SCFM 1 MICRON Air Line Filter 1/2 NPT 60SCFM 1 MICRON Air Line Filter 1IN NPT 100SCFM .01 MICRON COALESCING FILTER-1/2IN NPT-20SCFM .01 MICRON COALESCING FILTER-1/2IN NPT-35SCFM .01 MICRON COALESCING FILTER-1/2IN NPT-60SCFM .01 MICRON COALESCING FILTER-1IN NPT-100SCFM .01 MICRON COALESCING FILTER-1IN NPT-170SCFM .01 MICRON COALESCING FILTER-1.5IN NPT-250SCFM 30HP PRESSURE LUBRICATED DUPLEX AIR COMP . 20HP PRESSURE LUBRICATED DUPLEX AIR COMP . 30HP PRESSURE LUBRICATED AIR COMP . 20HP PRESSURE LUBRICATED AIR COMP . 2HP PORTABLE AIR COMPRESSOR/110V/90PSI 5 HP Rotary screw air compressor w/eCOOL Technology 7.5 HP Rotary screw air compressor w/eCOOL Technology 10 HP Rotary screw air compressor w/eCOOL Technology 15 HP Rotary screw air compressor w/eCOOL Technology 20 HP Rotary screw air compressor w/eCOOL Technology 25 HP Rotary screw air compressor w/eCOOL Technology 30 HP Rotary screw air compressor w/eCOOL Technology 40 HP Rotary screw air compressor w/eCOOL Technology 50 HP Rotary screw air compressor w/eCOOL Technology 5 HP Tank mounted rotary screw air compressor w/eCOOL Tech 7.5 HP Tank mounted rotary screw air compressor w/eCOOL 10 HP Tank mounted rotary screw air compressor w/eCOOL 15 HP Tank mounted rotary screw air compressor w/eCOOL 5 HP Tank mounted rotary screw air comp. w/dryer & w/eCOOL 7.5 HP Tank mounted rotary screw air comp. w/dryer & eCOOL 10 HP Tank mounted rotary screw air comp. w/dryer & eCOOL 15 HP Tank mounted rotary screw air comp. w/dryer & eCOOL 20 HP Tank Mounted Rotary Screw Air Comp. w/Dryer & eCOOL 25 HP Tank mounted rotary screw air comp. w/dryer & eCOOL 30 HP Tank mounted rotary screw air comp. w/dryer & eCOOL 5 HP 1 phase Horizontal Tank Mounted Air Compressor 5 HP 1 phase Vertical Tank Mounted Air Compressor
16-90
1-800-ROTUNDA
Item # 304-00090 304-00091 304-00092 304-00093 304-00094 304-00095 304-00096 304-00097 304-00098 304-00099 304-00100 304-00101 304-00102 304-00103 304-00104 304-00105 304-00106 304-00107 304-00108 304-00109 Item # 325-00001 325-00002 Item # 328-00001 328-00002 328-00003 328-00004 328-00005 328-00006 328-00007 328-00008 328-00009 328-00010 Item # 331-00001 331-00002 331-00003 331-00004 331-00005 331-00006 Model # 5E2HT8-3 5E2VT8-3 7E2HT8-1 7E2VT8-1 7E2VT8-3 7E2HT8-3 10HT12 15HT12 CV-8913 CV-9814B CV-9815B 5E2HTD12-1 5E2HTD12-3 7E2HTD12-1 7E2HTD12-3 10HTD20 CVD-8912B CVD-9813C CVD-9814C CVD-9815C Model # 82005 82009 Model # 2050-62291 2050C-62291 2050 62291 20503-62291 20503R 5050R R071-ELC 1550 5050R25 Model # 6003 6007A 6044 /6038 6043 6006 6009 Description
www.fordrotunda.com
Page # 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 7-6 Page # 7-18 7-18 Page #
5 HP 3 phase Horizontal Tank Mounted Air Compressor 5 HP 3 phase Vertical Tank Mounted Air Compressor 7.5 HP 1 phase Horizontal Tank Mounted Air Compressor 7.5 HP 1 phase Vertical Tank Mounted Air Compressor 7.5 HP 3 phase Vertical Tank Mounted Air Compressor 7.5 HP 3 phase Horizontal Tank Mounted Air Compressor 10 HP 3 phase Horizontal Tank Mounted air compressor 15 HP 3 phase Horizontal Tank Mounted Air Compressor 20 HP 3 phase Horizontal Tank Mounted Air Compressor 25 HP 3 phase Horizotal Tank Mounted Air Compressor 30 HP 3 phase Horizontal Tank Mounted Air Compressor 5HP Single Phase 220V Duplex Air Compressor 120 Gal. Tank 5HP Three phase Duplex Air Compressor 120 Gal. Tank 7.5 HP single phase 220V Duplex Air Compressor 120 Gal. Twin 7.5 HP Three phase Duplex Air Compressor 120 Gal Tank Twin 10 HP Three phase Duplex Air Compressor 200 Gal Tank Twin 15 HP Three phase Duplex Air Compressor 200 Gal. Tank Twin 20 HP Three phase Duplex Air Compressor 240 Gal. Tank Twin 25 HP Three phase Duplex Air Compressor 240 Gal. Tank Twin 30 HP Three phase Duplex Air Compressor 240 Gal. Tank Description Vision 100 Photometric Headlamp Aimer VA25 Optical Headlight Aimer Description 3 Way HD Antifreeze Coolant Test Kit - 1 Btl. and 1 Kit 3 Way HD Antifreeze Coolant Test - Case of 12 btls w/1Kit 3 Way HD Antifreeze Coolant Test - 1 Btl. 50 Strips 3 Way Antifreeze Coolant Test Kit (Syringe and Vial only) 3 Way HD Antifreeze Coolant Test Kit W/ 3 Bottle (50pcs ea) Antifreeze Coolant Retail Display Including 25 Packages. Suggested Retail Price is $5.99/package. Make-up Water Test Strip Retail Display w/25pkgs of 5pcs Antifreeze Coolant ELC Contamination Kit Automotive Coolant Test Strips 12 Bottles of 70 Strips Make-Up Water Test Strips 1 Bottle of 25 Description 12 Volt 70 Amp Mircroprocessor Controled Charger 12 Volt Microprocessor Wheel Charger Battery Strater Charging System Analyzer AC / DC Inductive Amp Clamp 6/12/24 Volt Wheel Charger 70/65/30Amp Output 6/12 Volt Wheel Charger W/70/60 Amp Output
331 ASSOCIATED EQUIPMENT Page # 12-3 12-3 12-4 12-4 12-3 12-3
16-91
1-800-ROTUNDA
Item # 331-00007 331-00008 331-00009 331-00010 331-00011 331-00012 331-00013 331-00014 331-00016 331-00017 331-00018 331-00019 331-00020 331-00021 331-00022 331-00023 331-00024 331-00025 Item # 333-00001 333-00002 333-00003 333-00004 333-00005 333-00007 333-00008 333-00009 333-00010 333-00011 333-00012 333-00013 333-00014 333-00015 333-00016 333-00017 333-00018 333-00019 333-00020 333-00021 333-00022 333-00023 Model # 6012 6019 6017 9425 6127 9410 6010A 9090 6255 6366 6001A 6002B 9003 9002 9004 MS6211 6275 ESS6008 Model # WC2015EDXD WC3020EDXA CC2010EDXDH-WHL CC3020EDXDH-WHL PC2520HDXXC PC3030HDXX PC4030HDXX DH2015SEDOD DH3020SEDOA DH4030HDOF AA75030A AA350036B 20146 + MC3020HDXXT 20171 + MD3030HBOF 20171 + MD4030HBOF NH4020EBNA MC3020HDXXT MM66039 AA402001 AA402002 AA402003 AA402004 Description
www.fordrotunda.com
Page # 12-3
6/12 Volt Wheel Charger W/70/60 Amp Output 6/12 Volt Wheel Charger 40 Amp Output 12 Volt Economy Wheel Charger 40 Amp Output 20 Amp Bench Charger with Electrical System Stabilazation Roll-A-Round KWIK Start Jumper 12 Volt 10 Amp Intellamatic Bench Charger. 6/12 Volt Bench Charger 70/60 Amp Output 6/12 Volt 15/2 Amp Automatic Bench Charger 360 CCA Booster Pac 4X20 Amp Industrial Gang Charger 6/12 Volt 100 Amp Wheel Charger w/100/75 Amp Output 6/12/18/24 Volt Wheel Charger w/100/80/50/40 Amp Output 6/12 Volt 0.9 Amp charger - Maintainer 12 Volt 1.5 Amp Battery Charger - Maintainer 12 Volt 0.8 / 2.0 Amp Battery Charger - Maintainer Kwikstart W/ Memory Saver Cable 3400 Peak Amp Kwikstart 12Volt 60Amp Intellamatic Smart Wheeled Charger Description Wall Mount 2hp 115v Medium Duty Cold Water Pressure Washer Wall Mount 4hp 220v Medium Duty Cold Water Pressure Washer Portable 2hp 115v Medium Duty Cold Water Pressure Washer Portable 4 hp 220v Medium Duty Cold Water Pressure Washer Portable 5hp Medium Duty Cold Water Pressure Washer Portable 6.5hp Heavy Duty Cold Water Power Washer Portable 11 hp Heavy Duty Cold Water Power Washer Portable 2hp 115v Heavy Duty Hot Water Power Washer Portable 4 hp 220v Heavy Duty Hot Water Power Washer Portable 11 hp Heavy Duty Hot Water Power Washer Light Duty Parts Cabinet Washer Heavy Duty Parts Cabinet Washer Cold Water 5.5hp Pressure Washer on Trailer Hot Water 9 hp Pressure Washer on Trailer Hot Water 13 hp Pressure Washer on Trailer Stationary Natural Gas Hot Water Pressure Washer Cold water skid mounted 5.5 HP . pressure washer Pressure Washer S-Steel 360 Deg. Swival Ceiling Boom Kit Automatic Electronic Ingniter for Hot H20 Pressure Washer Draft Diverter for Hot H2o Pressure Washer - All American Automatic on off switch for Hot H2o Press Washer All Amer Remote Control for Hot H2o Pressure Washer - All American
12-3 12-4 12-3 12-3 12-3 12-4 12-3 12-3 12-3 12-4 12-4 12-4 12-4 12-4 12-3 Page # 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-20, 7-22 7-21 7-21 7-21 7-21 7-21 7-22 7-22
16-92
1-800-ROTUNDA
www.fordrotunda.com
335 MISCO Item # 335-00001 335-00002 335-00003 335-00004 Item # 337-00001 337-00002 337-00003 337-00004 337-00005 Item # 339-00001 339-00002 341 OFFICE DEPOT Item # 341-00001 341-00002 341-00003 341-00004 341-00005 341-00006 341-00007 341-00008 341-00009 341-00010 341-00011 343 ARTLUX INC. Item # 343-00001 343-00002 343-90000 345 CAR-O-LINER Item # 345-00001 345-00002 345-00003 345-00004 345-00005 345-00006 345-00007 Model # 33192 34586 30346 30176 30554 34574 34429 Description Car-O-Liner Mark 6 Mobile Bench System Base Frame/no lift Car-O-Liner Wheel Kit for Benches Car-O-Liner Draw Aligner for Benches Car-O-Liner Mark6 Bench Parts B106 and B39MK Car-O-Liner Wheel Stand (High Lift T56) Car-O-Liner Mark 6 Mobile Bench System - Base Frame w/Lift Car-O-Liner Mark 6 Approach Ramp Kit 4-8 4-8 4-6, 4-8 Page # 4-8 Model # EXP1PKG E10PKG STD EQMT INSTALL Description EXP-1 System Package - TOFF F-1 OEM Sprayed-On Bedliner E-10 Sys Pkg - Portable - TOFF F-1 OEM Sprayed-On Bedliner Stand Equip Training & Instal for EXP1/E10 Pkg-TOFF F-1 Page # Model # 141882 905586 824046 824163 905586 911625 911409 911436 824109 824172 905334 Description Large Bundle with Keurig B-3000 Brewer and Supplies Small Bundle with Keurig B-150 Brewer and supplies Dark Magic Keurig K-Cup and Supplies Rell Package Breakfast Blend Decaf Keurig K-Cup & Suppies Rell Pkg Hazelnut Keurig K-Cup and Supplies Rell Package English Breakfast Tea Keurig K-Cup & Suppies Rell Pkg French Vanilla Keurig K-Cup and Supplies Rell Package Green Tea Keurig K-Cup and Supplies Rell Package Hot Cocoa Keurig K-Cup and Supplies Rell Package Keurig Coffee K-Cup and Supplies Rell Package KeurigTea & Cocoa K-Cup and Supplies Rell Package Page # Model # PA-201F-185 PA-201F-185-K FG-PA-RUB-00BLK AS-PA-PKG-00002 Model # LM-200 DB-8000 20-8000 20-8001 ESI-162 Model # D440A D440A-UV Description Ford Diesel Exhaust Fluid (DEF/AdBlue) Tester Ford Diesel Exhaust Fluid (DEF/AdBlue) Tester - KIT Rubber Armor Jacket for DEF Concentration Tester Virtually Indestructible Rugged Case for DEF Tester Description Tire/Wheel Lift Air Operated Strut Compressor QSP Strut Compressor Top Plate Add-On Accessory Wheel Kit for 337-00002 QSP Strut Compressor DB-8000 Sun Spot Super Bright 162 LED Work / Utility Light Description Refrigerant Gas Leak Detector Dual Mode Refrigerant Gas and UV Dye Leak Detector Page # 2-4 2-4 Page # 6-8 6-8 6-8 6-8 Page # 8-15 7-13 7-13 7-13
16-93
1-800-ROTUNDA
Item # 345-00008 345-00009 345-00010 345-00011 345-00012 345-00013 345-00014 345-00015 345-00016 345-00017 345-00018 345-00019 345-00020 345-00021 345-00022 345-00023 345-00024 345-00025 345-00026 345-00027 345-00028 345-00029 345-00030 345-00031 345-00032 345-00033 345-00034 345-00035 345-00036 345-00037 345-00038 345-00039 345-00040 345-00041 345-00042 345-00043 345-00044 345-00045 345-00046 345-00047 345-00048 345-00049 345-00050 Model # 32756 30774 35413 30531 35829 35816 35797 35796 35864 39634 34638 30541 32334 33044 35419 35800 35891 35893 35817 36283 30638 34573 31927 205 701 930 931 30948 34014 40204 39788 39750 39674 39630 36879 35889 39836 41146 41393 41856 34639 30984 39635 Description
www.fordrotunda.com
Page # 4-6, 4-8, 4-9 4-6, 4-8, 4-9 4-11
Car-O-Liner Power Unit for Benches and Lifting Platforms Car-O-Liner Hydraulic Oil for Power Unit Car-O-Liner EVO1 for Anchoring and Holding Car-O-Liner Single Claw Hook T18 Car-O-Liner Adapter Kit EVO for Mark 6 Bench Car-O-Liner Tool Cart (excluding board) Car-O-Liner Tool Board Set EVO1 Car-O-Liner Tool Board 900mm Car-O-Liner Car-O-Tronic Vision X3 Measuring System Car-O-Liner Car-O-Tronic Measuring Bridge 4m Car-O-Liner Pulling Hook Kit T10 - Universal Clamp System Car-O-Liner Accessories for Pulling Hook Kit T11 Car-O-Liner Bench Parts B110 and B310 Car-O-Liner Bench Parts B106 and B310 Car-O-Liner EVO2 Extended Anchoring System Car-O-Liner Tool Board Set EVO2 Car-O-Liner Truck Clamping B730 Car-O-Liner Bench Mounting Kit Truck B340Mk Car-O-Liner Tool Cart (with board) Car-O-Liner Tool Board for Trucks B73 Car-O-Liner Mounting Plate Specialty Clamp B248 Car-O-Liner Benchrack 4200 Frame and Tilt Lift Car-O-Liner Benchrack 4200 Ramp Kit Car-O-Liner Ram Adapter Car-O-Liner Pump Hose and Cylinder Set - 10 Ton Car-O-Liner Double Grab Hook Car-O-Liner Chain with Grab Hook 3/8 x 8' Car-O-Liner Bench Parts B106/B39BR Car-O-Liner Pillar Jack Kit Car-O-Liner Quick 42 Base Frame with Lift Car-O-Liner Quick42 Ramp Kit Car-O-Liner Quick42 Hydraulic Hose Car-O-Liner Quick42 Hydraulic Jack Kit Car-O-Liner Draw Aligner Q16 Car-O-Liner Extension for Draw Aligner Car-O-Liner Chain Kit 10 Ton Car-O-Liner Quick42 Quick Anchoring Q63 Car-O-Liner Quick42 Hydraulic Jack Spacers Car-O-Liner Shut off Valve for Draw Aligner Q16 Car-O-Liner Quick42 Mobility Kit Car-O-Liner Benchrack 5000 Frame and Tilt Lift Car-O-Liner Benchrack 5000 Ramp Kit Car-O-Liner Car-O-Tronic Measuring Bridge 5m
4-11 4-12
4-12 4-12 4-6 4-6 4-6, 4-8 4-6, 4-8 4-6 4-6 4-6, 4-7 4-6 4-7 4-7 4-7 4-7 4-7 4-7 4-7 4-7
16-94
1-800-ROTUNDA
Item # 345-00051 345-00052 345-00053 345-00054 345-00055 345-00056 345-00057 345-00058 345-00059 345-00060 345-00061 345-00062 345-00063 345-00064 345-00065 345-00066 345-00067 345-00068 345-00069 345-00070 345-00071 345-00072 345-00073 345-00074 345-00075 345-00076 345-00077 345-00078 345-00079 345-00080 345-00081 345-00082 345-00083 345-00084 345-00085 345-00086 345-00087 345-00088 345-00089 345-00090 345-00091 345-00092 345-00093 345-00094 345-00095 Model # 34640 31934 33907 33990 32333 35892 36442 36444 36448 41518 41519 41518_X 41519_X 34810 32254 32253 32266 33517 33519 33635 32228 34811 34859 34885 34886 34921 34860 33891 35105 36563 33074 40227 33638 34558 34559 34826 34575 32868 33045 725 40850 34576 33318 32967 33001 Description
www.fordrotunda.com
Page # 4-6 4-6 4-6 4-6
Car-O-Liner Benchrack 5500 Frame and Tilt Lift Car-O-Liner Benchrack 5500 Ramp Kit Car-O-Liner Benchrack 6300 Frame and Tilt Lift Car-O-Liner Benchrack 6300 Ramp Kit Car-O-Liner Benchrack Bench Parts B110/B39BR Car-O-Liner Benchrack Mounting Kit B340BR Car-O-Liner Truck Clamp Jaw for Ford Car-O-Liner Clamp Accessory for Ford Trucks Car-O-Liner Truck Clamp Accessory for Ford Trucks Car-O-Liner CTR12000 Welder 208V C-Gun Car-O-Liner CTR12000 Welder 460V C-Gun Car-O-Liner CTR12000 Welder 208V X-Gun Car-O-Liner CTR12000 Welder 460V X-Gun Car-O-Liner CR500DA Spot Welder 230V Car-O-Liner CR300/CR500 Cable Support Car-O-Liner Tool Panel with Rubber Mat Weld Car-O-Liner Weld Yoke 600mm Car-O-Liner Weld Electrode 40mm 120 deg Car-O-Liner Weld Electrode 80mm 120 deg Car-O-Liner Weld Electrode Dresser 120 deg Car-O-Liner Weld Fender Edge Kit Car-O-Liner CR500DA Welder 460V Car-O-Liner CR510WC Spot Weld 230V Car-O-Liner Weld Holder 40 Complete Car-O-Liner Weld Holder 80 Complete Car-O-Liner Weld Cap Kit Car-O-Liner CR510 WC Spot Welder 460V Car-O-Liner CR55 Aluminum Spotter Car-O-Liner PC30 Plasma Cutter Car-O-Liner CH37 Induction Heater Car-O-Liner Mig Welder CM181 Car-O-Liner Mig Welder CM221 Car-O-Liner Mig Welder CM253 Car-O-Liner Mig Welder CMI3000 Car-O-Liner Mig Welder CMI3000 2WF 230V Car-O-Liner Welding A-Tong Car-O-Liner Speed Frame and Lift with Lift Arms Car-O-Liner Height Extension 60mm Car-O-Liner Draw Aligner D20 5 Ton Car-O-Liner Pump Hose and Cylinder 5 Ton Car-O-Liner Speed Bench Part B661 Car-O-Liner Speed Plus Frame and Lift Car-O-Liner Chain Shortener for Speed Car-O-Liner Speed Chain Holder B636 Car-O-Liner Speed Side Pull Support
4-13 4-13
4-12
4-12 4-12
4-12
16-95
1-800-ROTUNDA
Item # 345-00096 345-00097 345-00098 345-00099 345-00100 345-00101 345-00102 345-00103 345-00104 345-00105 345-00106 345-00107 345-00108 345-00109 345-00110 345-00111 345-00112 345-00113 345-00114 345-00115 345-00116 345-00117 345-00118 345-00119 345-00120 345-00121 345-00122 349 tomcat equipment Item # 349-00001 349-00002 349-00003 349-00004 349-00005 349-00006 349-00007 349-00008 349-00009 349-00010 349-00011 Model # 170-20TB 170-24TC 170-26TD 253-26TD 253-27TC 253-30TD 253-30TC GTX-30TD GTX-30TC GTX-34TD GTX-34TC Description Model # 32992 34790 34765 32023 34572 35497 36481 31259 33493 33514 36424 43629 32651 34571 34568 30478 34619 34592 34386 90_1206.4_3 12_3273.0 1_9004.2 1_9001.1 35853 35420 41077 35719 Description Car-O-Liner Speed Down Pull Car-O-Liner Speed Distance Car-O-Liner Speed Ladder Support
www.fordrotunda.com
Page #
Car-O-Liner Speed Measuring Bridge 3 Car-O-Liner Vision Measuring Slide M90 Car-O-Liner Car-O-Soft Vision X3 Car-O-Liner Vision Cabinet Flat Pack Car-O-Liner Car-O-Tronic Measuring Parts M62 Car-O-Liner Battery Charger M741 Car-O-Liner Top for Vision Cabinet Car-O-Liner Classic Measuring Slide Car-O-Liner Vision Classic Software Car-O-Liner Measuring Bridge Support Stand Car-O-Liner Measuring Parts Car-O-Liner Mechanical Measuring Bridge M12 Car-O-Liner Tool Wagon M503 Car-O-Liner Car-O-Print Program Disk Car-O-Liner Mechanical Measuring Bridge M15 Car-O-Liner Speed Measuring Extension Car-O-Liner CTR12000 Balancer Car-O-Liner CTR12000 Cable Support Car-O-Liner CTR12000 Multi-Function Gun Only Car-O-Liner CTR12000 Multi-Function Gun Kit Car-O-Liner EVO3 Tool Board Set Car-O-Liner EVO 3-1 Car-O-Liner EVO 3-2 Car-O-Liner EVO 3 Holding and Fixturing System 4-11 Page # 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2 4-12 4-10 4-10 4-10 4-10
MINI MAG BRUSH ASSIST-20 DISK FLOOR SCRUBBER WALK BEHIND MINI MAG TRACTION ASSIST-24 CYLINDRICAL FLOOR SCRUBBER MINI MAG TRACTION ASSIST-26DISK FLOOR SCRUBBER WALKER MAGNUM 26 DISK WALK BEHIND FLOOR SCRUBBER MAGNUM 27 CYLINDRICAL WALK BEHIND FLOOR SCRUBBER MAGNUM 30 DISK WALK BEHIND FLOOR SCRUBBER MANGUM 30 CYLINIDRICAL WALK BEHIND FLOOR SCRUBBER GTX-30 DISK RIDER FLOOR SCRUBBER GTX-30 CYLINDRICAL RIDER FLOOR SCRUBBER GTX-34 DISK RIDER FLOOR SCRUBBER GTX-34 CYLINDRICAL RIDER
16-96
1-800-ROTUNDA
www.fordrotunda.com
351 BLUE STAR Item # 351-00001 Model # FAVIN-2090 Description AUTOMATED VIN SCANNER/IMAGER FOR DMS AND FORD SYSTEMS Description Run Clean Vacuum Kit for BD Laser Key Machine BD Laser High Security Side Milled Key Cutting Machine Jaw A/Red for BD Laser Gray Jaw (B) for BD Laser Green Jaw (C) for BD Laser Blue Jaw (D) for BD Laser PC+ Flash Edge Computerized Edge Cut Key Machine 7-16 Page # 7-16 7-16 Page #
355 BARNES DISTRIBUTION Item # 355-00001 355-00002 355-00003 355-00004 355-00005 355-00006 355-00007 Model # 9200029 9200000 9200002 9200003 9200004 9200005 C9100020
16-97
1-800-ROTUNDA
www.fordrotunda.com
WE CAN HELP!
The catalog features a limited selection of Rotundas approved equipment. Call 1-800-ROTUNDA, select option #2 for access to our complete product line or visit www.fordrotunda.com.
16-98
1-800-ROTUNDA
A A/C Equipment Accessories A/C Leak Detection A/C Leak Detection Dye Injector A/C Odor Remover Flexible Applicator Tool A/C Refrigerant Recovery and Recycling A/C Refrigerant Recovery, Recycle, Evacuate and Recharge Adapter Kits, Brake Lathe Adapter Kits, Pin Adapters, Transmission Saddle Adapters, Wheel Balancer AdvanceCure Accelerated Airflow System Aimers, Headlight Air Bag Simulators Air Compressor Selection Guide Air Compressors Air Dryers, Refrigerated Air Reels Alignment Lift Racks, Four-Post Alignment Lift Racks, Parallelogram Alignment Lift Racks, Scissor Alignment Lifts Alignment Sensors, Wheel Alignment Systems, Wheel Analyzer, Digital Battery Analyzer, Driveline Balance and NVH Analyzers, Emissions Anchoring and Holding System, Universal Anchoring System, Design-based Antifreeze Drains, Used Automated Storage and Retrieval System and Vertical Lift Module Automatic Car Polisher Automatic Car Washes Automatic Charger/Maintainers Automatic Spot Welders Automatic Transmission Fluid Exchangers Automotive Digital Multimeters Automotive Relay Testers B Balancer Chuck Kits Balancer Pin-Plate Systems Balancers, Wheel 15-9 15-8 15-6, 15-7 2-2, 2-3 2-1, 2-5 2-5 2-4 2-1, 2-2 2-1 1-4 1-6 14-4 8-14 15-7 15-9 3-1 7-18 14-7 7-1 7-2 7-8 7-3, 7-7 6-4, 6-6, 6-7 15-12 15-14 15-13 15-12, 15-13 15-11 15-10, 15-11 12-1 14-6 14-8, 14-9 4-11 4-1, 4-2 6-7 9-1 13-1 13-1, 13-2 12-4 4-13 10-1, 10-2 14-7 14-5
www.fordrotunda.com
Battery Analyzer, Digital Battery Chargers Battery Chargers/Testers Battery Load Testers Battery Racks Battery Starters Battery Testers Bench Chargers Bench Press, Hydraulic Benches, Fluid Containment Blanks, Key Bleeder Kit, Clutch Bleeders/Flushers, Brake Boilers and Furnaces, Used Oil Booths, Paint Brackets, Floor Crane Brake Bleeders/Flushers Brake Drum Micrometer Brake Lathe Accessories Brake Lathe Adapter Kits Brake Lathe Comparison Grid, Combination Brake Lathes Brake Lathes, Combination Brake Lathes, On-Car Breakout Box, OBD II Bulky Parts Bins Bump-N-Roll C Cabinet, Parts Spray Wash Cabinets, Modular Drawer Tool Cabinets, Storage Cabinets, Wall-Mounted Caddies, Gas Car Dollies Car Dryers Car Polisher, Automatic Car Wash Rinse System Car Wash Water Reclaim System Car Washes, Automatic Carousel, Motorized Tire Cart, Towing Changers, Tire Charger Kits, Power Supply 7-19, 7-21 11-1, 11-2 9-1, 11-5 11-5 6-1, 6-2 8-18 13-2 13-1 13-3 13-3 13-1, 13-2 9-1 7-18 15-1 15-4 12-2 12-1 12-1 12-4 12-1, 12-2 12-1 9-2 12-4 12-1, 12-2 12-3 7-11, 7-12 11-4, 11-6 7-17 1-1 1-1 7-13 3-1 8-18 1-1 1-6 1-4 1-6 1-4 1-6 1-3 1-2, 1-4, 1-5 1-4, 1-5 1-2 14-5 9-3 15-5
17-1
1-800-ROTUNDA
Chargers, Battery Chargers/Maintainers, Automatic Chargers/Testers, Battery Chuck Kits Clutch Bleeder Kit Code Cutters, Key Collision Repair Pulling Systems Combination Brake Lathe Comparison Grid Combination Brake Lathes Compressor Selection Guide, Air Compressors, Air Computerized Electronic Measuring System Computerized On-Car Brake Lathes Computerized Wheel Alignment Systems Computerized Wheel Balancers Cone Kits, Light Truck Front Conversion Kit, Cooler Line Flusher Coolant and Engine Oil UV Dyes Coolant Drains, Used Coolant Evacuation Kits, Used Coolant Exchangers Coolant/Windshield Wash Pump/Dispenser Cooler Line Flusher Adapters and Filter Cooler Line Flusher Conversion Kit Crane Brackets, Floor Cranes, Foldable Floor Curing System, Paint Cutters (Code and Duplicators), Key D DEF Dispensing Systems DEF Tester Detectors, Emissions Leak Diagnostic System (IDS), Integrated Diesel Engine Stands Digital Battery Analyzer Digital Micrometer Digital Multimeters Dispense Valves, Metered/Non-Metered Dispenser/Pump, Windshield Wash/Coolant Dispensers/Pumps, Gear Oil Dispensers/Pumps, Grease Dispensing Systems, Fluid Dispensing Systems, Portable 6-5, 6-8 6-8 14-8, 14-9 14-1 8-15 12-1 1-6 14-7 6-4, 6-6 6-3 6-3, 6-4, 6-6 6-4, 6-6 6-4, 6-6, 6-7 6-5, 6-8 12-1 12-4 12-4 12-1, 12-2 1-6, 15-9 1-1 7-14 7-16 4-4 4-9 1-3 1-4, 1-5 7-1 7-2 7-8 4-3, 4-10 1-2 15-10, 15-11 15-6, 15-7 15-9 10-4 2-5 6-3 6-3 10-1, 10-2 6-3 10-4 10-4 8-18 8-17, 8-18 3-1 7-14 7-16
www.fordrotunda.com
Dollies, Car Double Chuck Kit Drains, Antifreeze Drains, Oil/Other Fluids Drawer Tool Cabinets, Modular Driveline Balance and NVH Analyzer Drop-Off System, Key Drum Micrometer, Brake Drums, XL Pressure Dryers, Car Dryers, Refrigerated Air Duplex Air Compressor Systems Duplicators, Key Dye Injector, A/C Leak Detection Dyes, UV Leak Detection E Electrical System Tester Electronic Fluid Inventory Control Systems Electronic Key Cutting Machine Electronic Measuring System, Computerized Electronic Metered Dispense Valves Electronic Refrigerant Leak Detectors Emissions Analyzers Enclosed Hose Reels Enclosed Reciprocating Compressors Engine Oil UV Dyes, Coolant and Engine Stands Envelope Drop-off System, Key Evacuation Kits, Used Coolant Evacuation Kits, Used Oil Evacuators, Fluid (Drain to Tank) Evacuators, Portable Fluid EVAP Emissions System Testers, Fuel Exhaust Back Pressure Testers Exhaust Removal Systems F F-150 Truck Rotor Adapter Fans Fixed Finger Plates and Accessories Flex Probe Kit Flexible Applicator Tool, A/C Odor Remover 1-6 7-23 15-8 14-7 2-4 12-2 6-4, 6-6 7-14, 7-16 4-3, 4-10 6-4, 6-6 2-5 14-8, 14-9 6-6 7-3 2-5 8-15, 8-17 7-15 6-3 6-3 6-3 6-1 6-3, 6-5 14-8, 14-9 14-8, 14-9 7-9, 7-10 8-18 1-6 6-7 6-3, 6-5, 6-7 11-1, 11-2 14-6 7-15 1-6 15-9 13-2 7-3, 7-7 7-2, 7-5, 7-6 7-14 7-16 2-5 2-5
17-2
1-800-ROTUNDA
Floor Crane Brackets Floor Cranes, Foldable Floor Jacks Floor Scrubbers Fluid Containment Benches Fluid Dispensing Systems Fluid Drains Fluid Evacuators Fluid Exchangers, ATF Fluid Inventory Control Systems, Electronic Fluid Pumps Fluorescent Leak Detection Dyes Flusher, Heated Cooler Line Flushers/Bleeders, Brake Four-Post Lift Accessories Four-Post Lifts Frame Straightening Racks Fuel EVAP Emissions System Testers/Leak Detectors Fuel Tank Handler Fuel Tankers Furnaces and Boilers, Used Oil G Gas Caddies Gas, Refrigerant Leak Detectors Grease Dispensers/Pumps Grease Reels H Headlight Aimers Heated Cooler Line Flusher Heavy-Duty Engine Stands Hose Reels, Enclosed/Open Hydraulic Bench Press I IDS Inground Lifts and Accessories Intake Manifold Pressure Testers Integrated Diagnostic System (IDS) Interface Tester, Multimedia Inverter Spot Welding Systems 14-1 8-3 8-6, 8-11 14-8, 14-9 14-1 14-4 4-12 7-18 10-4 8-15, 8-17 6-4, 6-6, 6-7 7-11, 7-12 6-1, 6-2 2-4 6-4, 6-6 6-4, 6-6 8-18 8-17, 8-18 8-19, 8-20 5-1, 5-2 11-4, 11-6 6-4, 6-6 6-3, 6-5, 6-7 6-1 6-3, 6-5 10-1, 10-2 6-4, 6-6 6-3, 6-6 2-5 10-4 1-1 8-7, 8-10 8-7, 8-8, 8-10, 15-12 4-4 4-9 14-8, 14-9 8-13 6-1, 6-2 7-13
www.fordrotunda.com
J Jack Stands Jack, SUV Jacks, Floor Jacks, Rolling Jacks, Service Jacks, Transmission K Key Blanks Key Cutters (Code and Duplicators) Key Envelope Drop-Off Security System L Lathe Accessories, Brake Lathes, Brake Leak Detection Dyes Leak Detection, A/C Leak Detectors, Electronic Refrigerant Leak Detectors, Gas Refrigerant Leak Detectors, Fuel Evaporative Emissions System Lift Accessories Lift Module and Automated Storage and Retrieval System, Vertical Lift Racks, Alignment Four-Post Lift Racks, Alignment Parallelogram Lift Racks, Alignment Scissor Lifts, Alignment Lifts, Four-Post Lifts, Inground Lifts, Powertrain Lifts, Two-Post Lifts, Wheel Light Truck Front Cone Kits Load Testers, Battery M Measuring System, Computerized Electronic Metered Dispense Valves, Electronic Metered Gear Oil Dispenser, Portable 4-3, 4-10 6-4, 6-6 6-4 1-4 1-6 1-2, 1-4, 1-5 2-5 2-1, 2-5 2-5 2-4 14-8, 14-9 8-1, 8-3, 8-5, 8-7, 8-10, 8-11 9-1 15-12 15-14 15-13 15-12, 15-13, 15-15 8-7, 8-8, 8-10, 15-12 8-3 8-6, 8-11 8-13, 8-17 8-1, 8-2, 8-10 8-15, 15-7 15-9 12-1 7-17 7-14 7-16 7-15 8-12 8-19 8-19, 8-20 8-7, 8-10 8-19, 8-20 8-14
17-3
1-800-ROTUNDA
Micrometer, Digital Brake Drum Mix Rooms, Paint Modular Tool Cabinets Motorized Tire Carousel Multimedia Interface Tester Multimeters, Automotive Digital N Non-Metered Oil Dispense Valves NVH and Driveline Balance Analyzer O OBD II Breakout Box Odor Removal, A/C Offset Truck Wheel Adapters Oil and Coolant UV Dyes Oil and Refrigerant Vehicle Information Database Oil Dispense Valves Oil Dispenser, Portable Gear Oil Evacuation Systems, Used Oil Pumps Oil Reels Oil Drains On-Car Brake Lathe Open Hose Reels Overhead Exhaust Removal Systems P Paint Booths Paint Curing System Paint Mix Rooms Parallelogram Lift Racks Parts Bins, Bulky Parts Spray Wash Cabinet Parts Storage, Components and Accessories Pin Adapter Kits Pin-Plate Systems, Balancer Plates, Fixed Finger Portable Dispensing Systems Portable Exhaust Extraction System Portable Fluid Evacuators Portable Fuel Tankers Portable Gear Oil Dispenser Portable Workbenches 3-1 3-1 3-1 15-14 9-3 7-19, 7-21 9-1 14-4 15-8 15-8 6-5, 6-8 7-10 6-1 6-3, 6-5 6-1, 6-2 6-4 11-3, 11-4 14-5 2-4 15-9 2-5 2-1 6-4, 6-6 6-4 6-1, 6-3 6-3, 6-6, 6-7 6-4, 6-6, 6-7 6-3, 6-5, 6-7 1-2 6-4, 6-6 7-9, 7-10 6-4, 6-6 14-6 1-6 3-1 11-1, 11-2 9-1 14-4 14-7
www.fordrotunda.com
Power Pusher Power Supply Charger Kits Power Steering X-Changer Powertrain Lifts Prep Stations Press, Hydraulic Bench Presses and Accessories, Shop Pressure Brake Bleeder/Flusher Pressure Drums, XL Pressure Washers Probe Kit, Flex Pulling Systems Pump/Dispenser, Windshield Wash/Coolant Pumps, Oil Pumps/Dispensers, Gear Oil Pumps/Dispensers, Grease R R-134a A/C Service Equipment Racks, Alignment Four-Post Lift Racks, Alignment Parallelogram Lift Racks, Alignment Scissor Lift Racks, Frame Racks and Storage, Tire Reciprocating Air Compressors Reclaim System, Car Wash Water Recyclers, Refrigerant Reels, Air/Fluid Handling Refrigerant and Oil Vehicle Information Database Refrigerant Recovery, Recycle, Evacuate and Recharge Refrigerated Air Dryers Refrigerant Leak Detection Relay Shorting Plug Kit Relay Testers, Automotive Removal Systems, Exhaust Repair Kit, Spark Plug Thread Retrieval System, Vertical Lift Module and Automated Storage Reverse Osmosis Rinse System Rim Clamp Wheel Protection Rinse System, Car Wash Rolling Jacks 2-1 2-3 15-12 15-14 15-13 4-4 4-9 9-1, 9-2 7-2, 7-3, 7-5, 7-6 13-3 2-1, 2-2 6-4, 6-6, 6-7 2-1 2-1 7-3, 7-7 2-4 14-5 14-5 7-9, 7-10 10-3 9-1 13-3 15-5 13-3 8-7, 8-10 7-18 12-2 10-3 8-13, 8-17 3-1 7-11, 7-12 7-11, 7-12 1-1 15-9 7-20 7-22 14-7 4-4 4-9 6-3 6-3, 6-6, 6-7 6-3, 6-4, 6-6 6-4, 6-6
17-4
1-800-ROTUNDA
Rotary Screw Air Compressors Rotor Adapter, F-150 Truck S Saddle Adapters, Transmission Scissor Alignment Lift Racks Scrubbers, Floor Selection Guide, Air Compressor Sensors, Wheel Alignment Service Jacks Shop Presses and Accessories Simplex Air Compressors Simulators, Air Bag Small Parts Storage Smoke Machines for Leak Testing Spark Plug Thread Repair Kit Spot Welders Spot-Free Car Wash Rinse Systems Spray Booths, Paint Spray Wash Cabinet, Parts Stands, Engine Stands, Jack Stands, Under-Hoist Stationary Workbenches Stationary Workstations Storage and Retrieval System, Vertical Lift Module and Automated Storage Cabinets Storage Systems Strut Compressor SUV Jack T Tank Handler, Fuel Tankers, Fuel Teardown Workbenches Technician Workstations Telescoping Overhead Exhaust System Tester, Multimedia Interface Testers, Automotive Relay Testers, Battery Testers, Emission Systems 8-13 6-1, 6-2 11-4, 11-6 11-1, 11-2, 11-4 7-10 14-4 14-5 12-1, 12-2 14-8, 14-9 8-14 15-13 5-1, 5-2 7-1 15-11 8-19, 8-20 7-11, 7-12 7-2, 7-5, 7-6 14-7 9-1 14-8, 14-9 10-3 4-13 13-3 3-1 7-19, 7-21 8-15 8-12 8-12 11-3, 11-4 11-1, 11-2, 11-4 9-1 9-1, 11-5 9-1, 9-2, 11-1, 11-2 7-13 8-19 7-4, 7-8 1-6
www.fordrotunda.com
Thread Repair Kit, Spark Plug Tire Carousel, Motorized Tire Changers Tire Lifter Tire Racks and Storage Tool Cabinets Towing Cart Transmission Fluid Exchangers Transmission Jacks Transmission Saddle Adapters Truck Front Cone Kit, Light Truck Rotor Adapter, F-150 Truck Transmission Jacks Truck Wheel Adapters, Offset Two-Post Lifts and Accessories U ULA 3 Cone Underground Exhaust Removal Systems Under-Hoist Stands Universal Anchoring and Holding System Used Coolant Evacuation Systems Used Fluid Drains Used Oil Evacuation Systems Used Oil Furnaces and Boilers Used Oil Kit, Diaphragm Pumps V Vacuum Extraction Systems, Used Fluid Valves, Metered/Non-Metered Dispense Vehicle Communication Module (VCM) Vehicle Information Database for Refrigerant and Oil Vehicle Measurement Module (VMM) Vertical Lift Module and Automated Storage and Retrieval System Vibration Analyzer W Wall-Mounted Cabinets Wall-Mounted Workbenches Wash Cabinet, Parts Spray Wash Systems, Automatic Car Waterborne Drying Systems 11-5 11-3 7-19, 7-21 13-1, 13-2 3-1 6-1 6-4 , 6-6 14-2 2-1 14-3 9-1 14-6 15-9 7-10 8-12 4-11 6-2, 6-3 6-1, 6-3, 6-5, 6-7 6-3 7-13 6-7 10-3 9-1 15-1 15-4 8-15, 8-16 9-1, 9-2 11-1, 11-2 7-18 10-1, 10-2 8-14 8-14 15-9 1-6 8-14 15-9 8-1, 8-2, 8-10
17-5
1-800-ROTUNDA
Water Reclaim System, Car Wash Welders Wheel Adapters, Offset Truck Wheel Alignment Sensors Wheel Alignment Systems Wheel Balancer Accessories Wheel Balancer Adapters Wheel Balancers Wheel Chargers Wheel Lifts Wheel Protection Accessories, Rim Clamp Windshield Wash/Coolant Pump/Dispenser Work Centers Workbenches Workbench Accessories Workbenches, Portable Workbenches, Stationary Workbenches, Teardown Workbenches, Wall-Mounted Workstations, Stationary Work Shop Solution, Inventory Control Panel X XL Pressure Drums 15-9 13-3 4-12, 4-13 15-9 15-11 15-10, 15-11 15-6, 15-8, 15-9 15-7 15-9 15-6, 15-7 12-3 8-15, 15-7 15-5 6-3 11-1, 11-2, 11-4 11-1 11-4, 11-6, 11-7 11-7 11-3, 11-4 11-3, 11-4 11-4, 11-6 11-3 11-1, 11-2, 11-4 4-12
www.fordrotunda.com
17-6
Page
of
Mastercard
American Express
DO NOT SHIP UNTIL NOTIfIEd Estimated Ship Date: NEW FAcILITY ORdER Plan Sales Order Number: REAdY TO SHIP SALES ORdER NO.: ORdER/QuOTE EXPIRATION DATE: 220v Single Phase UNIT PRIcE 3 Phase AMOuNT
PART NuMbER
DEScRIPTION
Authorized Dealer Signature (please print) Authorized Dealer Signature Authorized Dealer Equipment Signature DATE DATE
ALL SALES ARE FOB SHIPPING POINT. By signing above, Dealer accepts all terms and conditions of sale, which are contained within the Rotunda General Service Equipment Catalog. INSTALLATION: Does not include Electrical or Air (Dealers Responsibility)
*I agree that the freight, installation and taxes are estimated and my lease/bill will reflect the actual freight charged for all shipments. Initials
January 2011
2.)
3.)
4.)
5.) 6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)