Sunteți pe pagina 1din 31

SOP Configuring BIB for HBL Scenario

Configuring the EVO 1900 Mega Hz with PST 3.1.6

Press OK Select CDMA

Select CDMA-2 which will bring the check box with it and view will become something like that.

Now select the right COM port, until the bulb below is turned Yellow.

Now press the button Read from phone which will bring some thing like that.

Press OK Now change to the TAB CDMA-2

Here PPP AN has check box, whle User has some thing like 0500513981@evdo.com, which you will copy and paste under the PPP UM, User: 0500513981@ptclhbl.com

Then press Write

Now press OK

You will get another BIG Green Success.

Now comes the first TAB CDMA, here you will also press the Write Button

After that one can exit the PST V3.1.6

Press OK Now disconnect the EVO and then reconnect it again. You will be presented with some thing like that.

Press Setting button.

Here under the UserName we will give the EVO PPP AN; which in our case is 0500513981@ptclhbl.com while the password will be ptcl

Now press Apply

Press OK After disconnecting the EVO, connect it again and press Connect

And you will be presented with some thing like that, this is to confirm that EVO is configured OK, and it is working.

Now connect EVO to the

Business in a Box and Ethernet port should be connected with

the LAN port on BIB ~ Ethernet port on laptop,

Now select the Obtain an IP address automatically.

Now ping the 192.168.1.1, the default IP from the Laptop.

Now type http://192.168.1.1/ in address bar of the browser, here the login information should be as under. Login: admin Password; admin

One should be treated with something like that. Now step # 1 Go to Menu, Management>Update Software

Tools -- Update Software Step 1: Obtain an updated software image file from your ISP. Step 2: Enter the path to the image file location in the box below or click the "Browse" button to locate the image file. Step 3: Click the "Update Software" button once to upload the new image file. NOTE: The update process takes about 180 seconds to complete, and your DSL Router will reboot. Here browse to the firmware file (6.78 Mb file) AVS920W_PTCL_A_0_33_V1.1.14.img and press Update Software

DSL Router Update Uploading is in progress. The DSL Router will reboot upon completion. This process will take about 180 seconds. After the BIB returns back, now go to the menu, Management>Settings>Restore Default and press the button Restore Default settings

Press OK Step # 2 Now go to the Advanced Setup>WAN Services>

Wide Area Network (WAN) Service Setup Choose Add, or Remove to configure a WAN service over a selected interface.You can add 16 WAN services at best. ETH and PTM/ATM service can not coexist.
Interface ppp0 Description Type Vlan8021p VlanMuxId ConnId N/A N/A N/A Igmp NAT Firewall Remove Edit

pppoe_0_0_33 PPPoE

Disabled Enabled Enabled

Now press Add button

WAN Service Interface Configuration Select a layer 2 interface for this service Note: For ATM interface, the descriptor string is (portId_vpi_vci) For PTM interface, the descriptor string is (portId_high_low)

Where portId=0 --> DSL Latency PATH0 portId=1 --> DSL Latency PATH1 portId=4 --> DSL Latency PATH0&1 low =0 --> Low PTM Priority not set low =1 --> Low PTM Priority set high =0 --> High PTM Priority not set high =1 --> High PTM Priority set

Select 3g and press Next

Here fields should be filled as under, APN: should clear the text in this box 3G PhoneNum: #777 PPP Username: 0500513981@ptclhbl.com PPP Password:ptcl Enable FireWall: Uncheck Enable NAT: Check The press Apply

Now Device Info menu should show some thing like that, and Internet LED on front panel of BIB should blink green.

While the Device Info>WAN should show the newly configured WAN, kindly note down the IPv4 Address in front of connected WAN, as in this case 10.18.16.98, is unique and static IP, and when one will call the HBL NOC, one should let them know about the WAN IP. Step # 3 Enabling Services of BIB Go to Management>Access Control>Services

Select all of the services and press Save/Apply Step # 4 Disable Wireless and DHCP Go to the Wireless> and follow these instructions, 1. Click Basic tab under Wireless option from left toolbar. 2. Uncheck Enable Wireless option 3. Click Apple/Save Wireless -- Basic This page allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Click "Apply/Save" to configure the basic wireless options.

Uncheck all of them and press Apply/Save Now go to the Advanced Setup>LAN option and provide the LAN IP, which in our case is provided by HBL under the heading of CPE in the provided Excel sheet.

Select the option of Disable DHCP Server, and then press Apply/Save

Now press OK. Now go to the LAN settings of the laptop again and set the IP from range of 10.30.234.1xx, as IP s hould be of the same range/subnet as one given on the LAN port of the BIB.

Press OK

First of all you have to provide the IP assigned to BIB (http://10.30.234.42/) in the browser, then provide the username and password again. Step # 5 Allowing Port access to Client LAN. Now go to the Advanced Setup>NAT>Virtual services,

Now press Add.

NAT -- Virtual Servers Select the service name, and enter the server IP address and click "Apply/Save" to forward IP packets for this service to the specified server. NOTE: The "Internal Port End" cannot be modified directly. Normally, it is set to the same value as "External Port End". However, if you modify "Internal Port Start", then "Internal Port End" will be set to the same value as "Internal Port Start". Remaining number of entries that can be configured:32
Use Interface: 3g/ppp1 Select a Service: Telnet Server Server IP Address: This IP is provided by the HBL under the heading of SSG, which in our case will be 10.30.234.41

Press Apply/Save

Press OK

Now same step should be followed with another service, press Add Use Interface: 3g/ppp1 Select a Service: IPSEC Server IP Address: 10.30.234.41

Press Apply/Save Now one has to connect the Ethernet port of BIB with the first available with the Juniper LAN port, and should call the HBL NOC, to check whether the BIB box can be accessed. Note: Take care to remember the WAN IP on 3g, and the Ethernet port connected with the SSG 20 hardware.

S-ar putea să vă placă și