Documente Academic
Documente Profesional
Documente Cultură
F300030 Tif
Sauer-Danfoss is a world leader within production of low speed orbital motors with
high torque. We can offer more than 1600 different orbital motors, categorised in types,
variants and sizes (incl. different shaft versions).
The motors vary in size (rated displacement) from 8 cm3 [0.50 in3] to 800 cm3 [48.9 in3]
per revolution.
Speeds range up to approx. 2500 min-1 (rpm) for the smallest type and up to approx.
600 min-1 (rpm) for the largest type.
Maximum operating torques vary from 13 Nm [115 lbfin] to 2700 Nm [24.000 lbfin]
(peak) and maximum outputs are from 2,0 kW [2,7 hp] to 70 kW [95 hp].
Characteristic features:
Planetary gears
Sauer-Danfoss complements the motor range with a complete programme of planetary
gears adapted to suit. The combination of motors and gears makes it possible to obtain
smooth running at fractional speeds and with torques up to 650 000 Nm
[5 800 000lbfin].
The Sauer-Danfoss orbital motors are used in the following application areas:
Survey of literature
with technical data
on Sauer-Danfoss
orbital motors
Construction equipment
Agricultural equipment
Material handling & Lifting equipment
Forestry equipment
Lawn and turf equipment
Special purpose
Machine tools and stationary equipment
Marine equipment
Detailed data on all Sauer-Danfoss motors can be found in our motor catalogue, which is
divided into 5 individual subcatalogues:
General information on Sauer-Danfoss orbital motors: function, use, selection of
hydraulic motor, hydraulic systems, etc.
Technical data on small motors: OML and OMM
Technical data on medium sized motors: OMP, OMR, OMH and OMEW
Technical data on medium sized motors: DH and DS
Technical data on large motors: OMS, OMT and OMV
Technical data on large motors: TMT
A general survey brochure on Sauer-Danfoss orbital motors gives a quick motor
reference based on power, torque, speed and capabilities.
versions
Versions............................................................................................................................. 6
code numbers
Code numbers................................................................................................................... 7
Technical data
Technical data................................................................................................................................................. 8
Technical data (e.g. speed, torque, pressure etc.)............................................................................ 8
Max. permissible shaft seal pressure................................................................................................... 9
Pressure drop in motor, oil flow in drain line, direction of shaft rotation............................10
Permissible shaft load............................................................................................................................11
Function diagrams..................................................................................................................................15
Shaft Versions............................................................................................................................................18
Port thread versions................................................................................................................................20
dimensions
Dimensions....................................................................................................................................................21
weight
Weight..............................................................................................................................................................35
Peak values
Intermittend values
Continuous values
The bar diagrams above are useful for a quick selection of relevant motor size for the
application. The final motor size can be determined by using the function diagram for
each motor size.
TMT can be found on pages 15 - 17.
The function diagrams are based on actual tests on a representative number of motors
from our production. The diagrams apply to a return pressure between 5 and 10 bar
[75 and 150 psi] when using mineral based hydraulic oil with a viscosity of 35 mm2/s
[165 SUS] and a temperature of 50C [120F]. For further explanation concerning how to
read and use the function diagrams, please consult the paragraph "Selection of motor
size" in the technical information "General" DHMH.PK.100.G2.02 520L0232.
Drain connection
Check valve
yes
Yes
Yes
No
No
No
TMT
TMT
TMT
4-Bolt
4-Bolt
Wheel
160 mm
125 mm
5 in
160 mm
125 mm
5 in
-
-
125 mm
125 mm
5 in
180 mm
180 mm
7.08 in
180 mm
180 mm
160 mm
200 mm
160 mm
6.37 in
200 mm
160 mm
6.37 in
-
-
160 mm
160 mm
6.37 in
224 mm
224 mm
8.82 in
210 mm
210 mm
194 mm
European version
Cyl 40 mm G 3/4
Cyl 40 mm G 3/4
Cyl 1.5 in 1 1/16 - 12 UN
Port size
200 mm
160 mm
6.37 in
Shaft
160 mm
125 mm
5 in
Spigot diameter
Mounting flange
US version
Versions
Yes
No
TMT
yes
No
TMT
Yes
No
TMT
Yes
No
TMT
yes
No
TMT
Yes
No
TMT
Yes
No
TMT U
Yes
No
TMT U
Yes
No
TMT FL
Yes
No
TMT FL
Yes
No
TMT FL
Yes
No
TMT FL
Yes
No
TMT FL
Yes
No
TMT FL
No
TMTW
Yes
No
TMTW
Yes
No
TMTW FL
Function diagram see page :
315
400
470
500
151Z3010
151Z3016
151Z3060
250
151Z3011
151Z3017
151Z3061
151Z3012
151Z3018
151Z3062
151Z3013
-
151Z3063
151Z3014
-
151Z3064
630
151Z3015
-
151Z3065
151Z3021
151Z3027
151Z3071
151Z3031
151Z3037
151Z3081
151Z3001
151Z3101
151Z3041
151Z3051
151Z3091
151Z3111
151Z3121
151Z3131
151Z3230
151Z3274
11033923
15
151Z3022
151Z3023
151Z3028
-
151Z3072
151Z3073
151Z3032
151Z3033
151Z3038
-
151Z3082
151Z3083
151Z3002
151Z3003
151Z3102
151Z3103
151Z3042
151Z3043
151Z3052
151Z3053
151Z3092
151Z3093
151Z3112
151Z3113
151Z3122
151Z3123
151Z3132
151Z3133
151Z3231
151Z3232
151Z3275
151Z3276
11033924
16
16
151Z3024
-
151Z3074
151Z3034
-
151Z3084
151Z3004
151Z3104
151Z3044
151Z3054
151Z3094
151Z3114
151Z3124
151Z3134
151Z3233
151Z3277
11033926
17
151Z3025
-
151Z3075
151Z3035
-
151Z3085
151Z3005
151Z3105
151Z3045
151Z3055
151Z3095
151Z3115
151Z3125
151Z3135
151Z3234
151Z3278
11033927
17
151Z3020
151Z3026
151Z3070
151Z3030
151Z3036
151Z3080
151Z3000
151Z3100
151Z3040
151Z3050
151Z3090
151Z3110
151Z3120
151Z3130
151Z3229
151Z3273
11033922
15
Dimensions Page
DISPLACEMENT [cm3]
8 23
8 24
8 25
8 23
8 24
8 25
8 23
8 24
8 25
8 26
8 27
8 28
8 28
8 29
8
31
8
31
8
30
8
32
8
33
8
34
bar
270
140
cont.
(psi)
[3915]
[2030]
bar
370
175
int.1)
(psi)
[5365]
(2540)
bar
420 210
peak2)
(psi)
(6090)
[3045]
For max. permissible combination of flow and pressure, see function diagram for actual motor
1)
Intermittend operation: the permissible values may occur for max. 10% of every minute
2)
Peak load: the permissible value may occur for max. 1% of every minute
Nm 2000
[lbf.in]
[17 700]
bar
13
[psi]
[190]
bar 20
[psi]
[365]
bar
40
[psi]
[580]
Max. Permissible
Shaft Seal Pressure
- - - - Intermittent operation: The permissible values may occur for max. 10% of every minute.
Continuous operation
WWarning
Drain line should always be used.
520L0523 Rev. CA Jan 2008
The curve applies to an unloaded motor shaft and an oil viscosity of 35 mm2/s [165 SUS].
A: TMT 250, 315
B: TMT 400, 470, 500 and 630
Oil flow in drain line
Direction of shaft
rotation
TMTW
10
TMT
TMT FL
Spigot diameter 160 mm [6.3 in] TMT and 180 mm [7.1 in] TMT FL
11
12
13
Permissible shaft
load for TMTW FL
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
520L0523 Rev. CA Jan 2008
15
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
16
Explanation of function diagram use, basis and conditions can be found on page 5.
Continuous range
Intermittent range (max. 10% operation every minute)
Intermittent pressure drop and oil flow must not occur simultaneously.
17
A:
F:
Cylindrical shaft 40 mm
Parallel key
A12 x 8 x 70
DIN 6885
C:
E:
D:
G:
18
Tapered shaft 45 mm
(ISO/R775)
DIN 937
Across flats: 46 mm
Tightening torque:
500 30 Nm [4425 265 lbfin]
Taper 1 : 10
Parallel key
B12 x 8 x 28
D: Cylindrical shaft
1 1/2 inch
I:
Parallel key
3/8 x 3/8 x 2 1/4 inch
B.S. 46
E:
F:
G:
H:
J:
Tightening torque:
4425 265 lbf.in [500 30 Nm]
Parallel key
7/16 x 7/16 x 1 1/4 inch
B.S. 46
19
A: G Main port
F: ISO 228/1 G
20
C: G Drain/release
port
H: ISO 228/1 G 1/4
mm
inch
16
16
12/24
12/24
30
30
33.8656
1.3333
+0.4
+0.0157
Major dia.
D 38.4
1.5118
ri
0
0
Form dia. (min) Dfi
37.6
1.4803
+0.04
+0.00157
Minor dia.
Di 32.15
1.2657
0
0
Space width (circular)Lo 4.516 0.037 0.1777 0.0014
Tooth thicknes
So 2.170
0.0854
(circulator)
Fillet radius
Rmin.
0.5
0.02
Max. measurement
+0.1
+0.004
I 26.9
1.059
between pins*
0
0
Pin dia.
d 4.843 0.001 0.1903 0.00004
*Finished dimensions (when hardened)
520L0523 Rev. CA Jan 2008
21
Blank shaft
A blank shaft is available for TMTU motor, please contact Sauer-Danfoss Sales
Organisation.
22
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
191.5
TMT 250
[7.54]
200.8
TMT 315
[7.91]
211.3
TMT400
[8.32]
219.5
TMT 470
[8.64]
211.3
TMT 500
[8.32]
225.3
TMT 630
[8.87]
165
[6.50]
174.3
[6.86]
184.8
[7.28]
193
[7.60]
184.8
[7.28]
198,8
[7.83]
150.5
[5.93]
158.9
[6.26]
170.3
[6.70]
178.5
[7.03]
170.3
[6.70]
184.3
[7.26]
23
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
200
TMT 250
[7.87]
209.3
TMT 315
[8.24]
219.8
TMT400
[8.65]
173.5
[6.83]
182.8
[7.20]
193.3
[7.61]
159
[6.26]
168.3
[6.63]
178.8
[7.04]
228 201.5
TMT 470
[8.98] [7.93]
219.8 193.3
TMT 500
[8.65] [7.61]
233.8 207.3
TMT 630
[9.20] [8.16]
187
[7.36]
178.8
[7.04]
192.8
[7.59]
24
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
218.7 192.4 177.9
TMT 250
[8.61] [7.57] [7.00]
227.9 201.7 187.2
TMT 315
[8.97] [7.94] [7.37]
238.4 212.2 197.7
TMT400
[9.39] [8.35] [7.78]
246.7 220.4 205.9
TMT 470
[9.71] [8.68] [8.11]
238.4 212.2 197.7
TMT 500
[9.39] [8.35] [7.78]
252.4 226.2 211.7
TMT 630
[9.94] [8.91] [8.33]
C:
D:
25
Bearing less
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
TMTU 250
TMTU 315
TMTU 400
TMTU 470
TMTU 500
TMTU 630
158.5
[6.24]
168.8
[6.65]
178.3
[7.02]
186.5
[7.32]
178.3
[7.02]
192.3
[7.57]
131
[5.16]
141.3
[5.56]
151.8
[5.98]
160
[6.26]
151.8
[5.98]
165.8
[6.53]
117.5
[4.63]
126.8
[4.99]
137.3
[5.41]
145.5
[5.73]
137.3
[5.41]
151.3
[5.96]
26
Bearing less
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
TMTU 250
TMTU 315
TMTU 400
TMTU 470
TMTU 500
TMTU 630
158.5
[6.24]
168.8
[6.65]
178.3
[7.02]
186.5
[7.32]
178.3
[7.02]
192.3
[7.57]
131
[5.16]
141.3
[5.56]
151.8
[5.98]
160
[6.26]
151.8
[5.98]
165.8
[6.53]
117.5
[4.63]
126.8
[4.99]
137.3
[5.41]
145.5
[5.73]
137.3
[5.41]
151.3
[5.96]
27
mm
mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
240.1 213.6 199.1
TMT 250 FL
[9.45] [8.41] [7.84]
249.4 222.9 208.4
TMT 315 FL
[9.82] [8.78] [8.20]
259.9 233.4 218.9
TMT 400 FL
[10.23] [9.19] [8.62]
268.2 241.7 227.2
TMT 470 FL
[10.56] [9.52] [8.94]
259.9 233.4 218.9
TMT 500 FL
[10.23] [9.19] [8.62]
273.9 247.4 232.9
TMT 630 FL
[10.78] [9.74] [9.17]
C: G 3/4 ;17 mm [0.67 in] deep
D: Drain connection
G 1/4; 12 mm [0.47 in] deep
E: Release port
G 1/4; 12 mm [0.47 in] deep
28
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
259 232.5 218
TMT 250 FL
[10.20] [9.15] [8.58]
268.3 241.8 227.3
TMT 315 FL
[10.56] [9.52] [8.95]
278.8 252.3 237.8
TMT 400 FL
[10.98] [9.93] [9.36]
287 260.5 246
TMT 470 FL
[11.30] [10.26] [9.69]
278.8 252.3 237.8
TMT 500 FL
[10.98] [9.93] [9.36]
292.8 266.3 251.8
TMT 630 FL
[11.53] [10.48] [9.91]
C: 1 1/16 - 12 UN O-ring boss port;
19 mm [0.75 in] deep
D: Drain connection 9/16 - 18 UNF
O-ring boss port; 12.7 mm
[0.5 in] deep
E: Release port 7/16 - 20 UNF
O-ring boss port;
12.7 mm [0.5 in] deep
29
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
232 205.5
191
TMT 250 FL
[9.13] [8.09] [7.52]
241.2 214.7 200.2
TMT 315 FL
[9.50] [8.45] [7.88]
251.7 225.2 210.7
TMT 400 FL
[9.91] [8.87] [8.30]
260 233.5 219
TMT470 FL
[10.24] [9.19] [8.62]
251.7 225.2 210.7
TMT 500 FL
[9.91] [8.87] [8.30]
265.7 239.2 224.7
TMT 630 FL
[10.46] [9.42] [8.85]
30
mm mm mm
Type
L
L
L
(in) 1 (in) 2 (in)
232 205.5
191
TMT 250 FL
[9.13] [8.09] [7.52]
241.2 214.7 200.2
TMT 315 FL
[9.50] [8.45] [7.88]
251.7 225.2 210.7
TMT 400 FL
[9.91] [8.87] [8.30]
260 233.5 219
TMT470 FL
[10.24] [9.19] [8.62]
251.7 225.2 210.7
TMT 500 FL
[9.91] [8.87] [8.30]
265.7 239.2 224.7
TMT 630 FL
[10.46] [9.42] [8.85]
C: G 3/4; 17 mm [0.67 in] deep
D: Drain connection
G 1/4; 12 mm [0.47 in] deep
E: Release port
G 1/4; 12 mm [0.47 in] deep
31
mm
Type
L
1 (in)
250.1
[9.85]
259.4
TMTW 315
[10.21]
269.9
TMTW 400
[10.63]
278.1
TMTW 470
[10.95]
269.9
TMTW 500
[10.63]
283.9
TMTW 630
[11.18]
TMT W 250
mm
L2
(in)
99
[3.90]
108.3
[4.26]
118.8
[4.68]
127
[5.00]
118.8
[4.68]
132.8
[5.23]
32
mm
Type
L
1 (in)
250.1
[9.85]
259.4
TMTW 315
[10.21]
269.9
TMTW 400
[10.63]
278.1
TMTW 470
[10.95]
269.9
TMTW 500
[10.63]
283.9
TMTW 630
[11.18]
TMT W 250
mm
(in)
L2
99
[3.90]
108.3
[4.26]
118.8
[4.68]
127
[5.00]
118.8
[4.68]
132.8
[5.23]
33
Type
mm mm mm mm
L
L
L
L
(in) 1 (in) 2 (in) 3 (in)
131.0
TMTW 250 FL
[5.16]
140.2
TMTW 315 FL
[5.52]
150.7
TMTW 400 FL
[5.93]
150.7
TMTW 500 FL
[5.93]
86.8
[3.42]
96.0
[3.78]
106.5
[4.19]
106.5
[4.19]
101.3
[3.99]
110.5
[4.35]
121.0
[4.76]
121.0
[4.76]
110.8
[4.36]
120.0
[4.72]
130.5
[5.14]
130.5
[5.14]
144.5
[5.69]
34
Code no Weight
kg [lb]
151Z3000
16.1
151Z3001
16.9
151Z3002
17.8
151Z3003
18.5
151Z3004
19.0
151Z3005
19.0
151Z3010 25.2
151Z3011 26.1
151Z3012 27.1
151Z3013 27.8
151Z3014 28.4
151Z3015 28.4
151Z3016 22.5
151Z3017 23.3
151Z3018 24.3
151Z3020 25.2
151Z3021 26.1
151Z3022 27.1
151Z3023 27.8
151Z3024 28.4
151Z3025 28.4
151Z3026 22.5
151Z3027 23.3
151Z3028 24.3
151Z3030 25.2
151Z3031 26.1
151Z3032 27.1
151Z3033 27.8
151Z3034 28.4
151Z3035 28.4
151Z3036 22.5
151Z3037 23.3
151Z30.38 24.3
151Z3040
35.3
151Z3041
36.2
151Z3042
37.2
1513Z043
38.0
151Z3044
38.5
151Z3045
38.5
151Z3050
35.3
151Z3051
36.2
151Z3052
37.2
151Z3053
38.0
151Z3054
38.5
151Z3055
38.5
[35.49]
[37.26]
[39.24]
[40.79]
[41.89]
[41.89]
[55.56]
[57.54]
[59.75]
[61.29]
[62.61]
[62.61]
[49.60]
[51.37]
[53.57]
[55.56]
[57.54]
[59.75]
[61.29]
[62.61]
[62.61]
[49.60]
[51.37]
[53.57]
[55.56]
[57.54]
[59.75]
[61.29]
[62.61]
[62.61]
[49.60]
[51.37]
[53.57]
[77.82]
[79.81]
[82.01]
[83.78]
[84.88]
[84.88]
[77.82]
[79.81]
[82.01]
[83.78]
[84.88]
[84.88]
Code no Weight
kg [lb]
Code no Weight
kg [lb]
151Z3060 23.9
151Z3061 24.7
151Z3062 25.7
151Z3063 26.5
151Z3064 27.0
151Z3065 27.0
151Z3070 23.9
151Z3071 24.7
151Z3072 25.7
151Z3073 26.5
151Z3074 27.0
[52.69]
[54.45]
[56.66]
[58.42]
[59.52]
[59.52]
[52.69]
[54.43]
[56.66]
[58.42]
[59.52]
151Z3229 27.6
151Z3230 28.4
151Z3231 29.3
151Z3232
30.0
151Z3233
30.5
151Z3234
30.5
151Z3273 27.6
151Z3274 28.4
151Z3275 29.3
151Z3276
30.0
151Z3277
30.5
[60.85]
[62.61]
[64.60]
[66.14]
[67.24]
[67.24]
[60.85]
[62.61]
[64.60]
[66.14]
[67.24]
151Z3075 27.0
151Z3080 23.9
151Z3081 24.7
151Z3082 25.7
151Z3083 26.5
151Z3084 27.0
151Z3085 27.0
151Z3090
36.7
151Z3091
37.6
151Z3092
38.6
151Z3093
39.4
151Z3094
39.9
151Z3095
39.9
151Z3100
16.1
151Z3101
16.9
151Z3102
17.8
151Z3103
18.5
151Z3104
19.0
151Z3105
19.0
151Z3110
39.5
151Z3111
40.4
151Z3112
41.4
151Z3113
42.2
151Z3114
42.7
151Z3115
42.7
151Z3120
39.5
1513Z121
40.4
151Z3122
41.4
151Z3123
42.2
151Z3124
42.7
151Z3125
42.7
151Z3130
39.5
151Z3131
40.4
151Z3132
41.4
151Z3133
42.2
151Z3134
42.7
151Z3135
42.7
[59.52]
[52.69]
[54.45]
[56.66]
[58.42]
[59.52]
[59.52]
[80.91]
[82.89]
[85.10]
[86.86]
[87.96]
[87.96]
[35.49]
[37.26]
[39.24]
[40.79]
[41.89]
[41.89]
[87.08]
[89.07]
[91.27]
[93.03]
[94.14]
[94.14]
[87.08]
[89.07]
[91.27]
[93.03]
[94.14]
[94.14]
[87.08]
[89.07]
[91.27]
[93.03]
[94.14]
[94.14]
151Z3278
11033922
11033923
11033924
11033926
11033927
[67.24]
[84.44]
[86.20]
[88.18]
[90.83]
[90.83]
30.5
38.3
39.1
40.0
41.2
41.2
35
OUR PRODUCTS
Hydrostatic transmissions
Hydraulic power steering
Electro-hydraulic power steering
Electric power steering
Closed and open circuit axial piston
pumps and motors
Proportional valves
Directional spool valves
Cartridge valves
Hydraulic integrated circuits
Local address:
Hydrostatic transaxles
Integrated systems
Fan drive systems
Electrohydraulic controls
Digital electronics and software
Electric motors and inverters
Sensors
Sauer-Danfoss ApS
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444
Fax: +45 7488 4400
Sauer-Danfoss-Daikin LTD
Sannomiya Grand Bldg. 8F
2-2-21 Isogami-dori, Chuo-ku
Kobe, Hyogo 651-0086, Japan
Phone: +81 78 231 5001
Fax: +81 78 231 5004
www.sauer-danfoss.com