Sunteți pe pagina 1din 21

WCDMA RAN

AMR Voice Quality Improvement Based on PLVA Feature Parameter Description


Issue Date 01 2013-04-28

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.


Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China http://www.huawei.com support@huawei.com

Website: Email:

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

Contents

Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1 1.2 Intended Audience..........................................................................................................................................................1 1.3 Change History...............................................................................................................................................................1

2 Overview.........................................................................................................................................3 3 Technical Description...................................................................................................................4


3.1 AMR Speech Encoding and Decoding...........................................................................................................................4 3.2 AMR Speech Decoding Using the Viterbi Algorithm....................................................................................................5 3.3 AMR Speech Decoding Using the PLVA......................................................................................................................6

4 Related Features.............................................................................................................................8 5 Network Impact.............................................................................................................................9 6 Engineering Guidelines.............................................................................................................10


6.1 When to Use AMR Voice Quality Improvement Based on PLVA..............................................................................10 6.2 Planning........................................................................................................................................................................10 6.2.1 RF Planning...............................................................................................................................................................10 6.2.2 Network Planning......................................................................................................................................................10 6.2.3 Hardware Planning....................................................................................................................................................10 6.3 Deployment..................................................................................................................................................................11 6.3.1 Requirements.............................................................................................................................................................11 6.3.2 Activation..................................................................................................................................................................11 6.3.3 Activation Observation..............................................................................................................................................12 6.3.4 Deactivation...............................................................................................................................................................12 6.4 Performance Monitoring...............................................................................................................................................12 6.5 Parameter Optimization................................................................................................................................................13 6.6 Troubleshooting............................................................................................................................................................13

7 Parameters.....................................................................................................................................14 8 Counters........................................................................................................................................15 9 Glossary.........................................................................................................................................16

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

ii

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

Contents

10 Reference Documents...............................................................................................................17

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

iii

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

1 About This Document

1
1.1 Scope 1.2 Intended Audience

About This Document

This document describes WRFD-140201 AMR Voice Quality Improvement Based on PLVA, including its technical principles, related features, network impact, and engineering guidelines.

This document is intended for personnel who: l l Need to understand the features described herein Work with Huawei products

1.3 Change History


This section provides information about the changes in different document versions. There are two types of changes, which are defined as follows: l l Feature change Changes in features of a specific product version Editorial change Changes in wording or addition of information that was not described in the earlier version

01 (2013-04-28)
This issue does not include any changes.

Draft A (2013-01-30)
Compared with issue 02 (2012-07-20) for RAN14.0, Draft A (2013-01-30) of RAN15.0 includes the following changes.
Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 1

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

1 About This Document

Change Type Feature change Editorial change

Change Description None Optimized engineering guidelines. For details, see chapter 6 Engineering Guidelines.

Parameter Change None None

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

2 Overview

Overview

Adaptive Multi-rate(AMR) audio codec is a patented speech coding scheme adopted by the 3GPP as the standard codec for UMTS. Channel encoding for AMR voice services uses convolutional codes. In RAN14.0, Huawei introduces the Parallel List Viterbi Algorithm (PLVA) to decode convolutional codes. The PLVA outperforms the Viterbi algorithm used by most vendors and previous Huawei products, and it improves the voice service quality without affecting power control or compromising system capacity. The feature introduces more robustness to the voice service which is more noticeable in poor radio condition. AMR Voice Quality Improvement Based on PLVA does not depend on any other feature and can be used with any other feature.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

3 Technical Description

Technical Description

3.1 AMR Speech Encoding and Decoding


At the UMTS physical layer, convolutional codes are used to perform channel encoding for AMR voice services and power control is used to ensure AMR voice quality. Figure 3-1 shows channel encoding and power control for UMTS AMR voice services in the uplink. Figure 3-1 Channel encoding and power control for UMTS AMR voice services in the uplink

As shown in Figure 3-1, the UE uses convolutional codes to encode AMR voice data and sends the encoded data to the NodeB. The NodeB decodes the received data and performs a cyclic redundancy check (CRC) on the decoded data. The NodeB then sends the decoded data and a CRC indicator (CRCI) to the RNC. The RNC calculates the block error rate (BLER) for outerloop power control based on all the CRCIs received. The RNC also sends the decoded data and the CRCI to the Core Network (CN) for AMR voice data decoding (source decoding).

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description
NOTE

3 Technical Description

The RNC calculates the BLER for outer-loop power control based on the ratio of CRCIs indicating CRC failures to all CRCIs.

AMR voice services include narrowband and wideband AMR voice services. There are three classes of narrowband AMR voice services: A, B, and C. There are two classes of wideband AMR voice services: A and B. The Viterbi algorithm and PLVA apply to both narrowband and wideband AMR voice services. The following description is based on narrowband AMR voice services. Of the three classes of narrowband AMR voice services, class A is of high importance and includes a 12-bit number used for CRC. The other classes are of low importance and CRC is not performed on them. 3.1 AMR Speech Encoding and Decoding shows the separate channel encoding for classes A, B, and C of narrowband AMR services. Figure 3-2 Channel encoding for classes A, B, and C of narrowband AMR services

3.2 AMR Speech Decoding Using the Viterbi Algorithm


The Viterbi algorithm is adopted by most vendors to decode convolutional codes. Figure 3-3 shows the working mechanism of the Viterbi algorithm. Figure 3-3 Working mechanism of the Viterbi algorithm

The Viterbi algorithm selects the optimal path based on the maximum likelihood theory and exports the data decoded on the optimal path. If the data decoded on the optimal path fails the CRC, the AMR speech codec discards the data. As a result, voice quality deteriorates. Figure 3-4 shows the narrowband AMR speech decoding using the Viterbi algorithm.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

3 Technical Description

Figure 3-4 Narrowband AMR speech decoding using the Viterbi algorithm

As shown in Figure 3-4, the three AMR voice classes are separately decoded by the Viterbi decoder, and the CRC is performed only on the decoded data of class A. The CRCI is used as a reference for outer loop power control (OLPC) and is also sent as a bad frame indication (BFI) to the AMR speech codec on the CN. If a BFI indicates that a speech frame is erroneous, the AMR speech codec on the CN discards the speech frame to prevent noise.

3.3 AMR Speech Decoding Using the PLVA


Huawei PLVA is an enhanced CRC-assisted Viterbi algorithm. Figure 3-5 shows the working mechanism of the PLVA. Figure 3-5 Working mechanism of the PLVA

Instead of selecting only the most optimal path, the PLVA selects the top N optimal paths and performs CRC on the data decoded on these paths. The PLVA only exports data that passes the CRC. If the data decoded on these paths fails the CRC, the PLVA exports the data decoded on the optimal path, which is the same path selected by the Viterbi algorithm. The PLVA outperforms the Viterbi algorithm because it chooses the data decoded on multiple paths, which include the optimal one selected by the Viterbi algorithm. Therefore, when the data decoded by the Viterbi algorithm is correct, the data decoded by the PLVA is also correct. However, when the data decoded by the PLVA is correct, the data decoded by the Viterbi algorithm is not necessarily correct because there are occasions when the data decoded on the optimal path is incorrect whereas the data decoded on other paths selected by the PLVA is correct. In simulations
Issue 01 (2013-04-28) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 6

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

3 Technical Description

where the PLVA selects four paths, the signal-to-noise ratio (SNR) is 0.2 to 0.8 dB better than that produced by the Viterbi algorithm. Figure 3-6 shows the narrowband AMR speech decoding using the PLVA. Figure 3-6 Narrowband AMR speech decoding using the PLVA

As shown in Figure 3-6, CRC is performed on the AMR voice data of class A and therefore the data can be decoded using the PLVA. The mean opinion score (MOS) of class A AMR voice data is improved by reducing the BLER. CRC is not performed on classes B and C AMR voice data and therefore classes B and C AMR voice data can only be decoded by using the Viterbi algorithm. The PLVA exports and sends the decoded data, Viterbi CRCI, and PLVA CRCI to the RNC. The Viterbi CRCI is used for OLPC. The PLVA CRCI serves as the BFI, indicating whether a speech frame is erroneous. The Viterbi CRCI is used for OLPC and the PLVA CRCI serves as the BFI. This dual-CRCI mechanism does not affect power control. Note that this feature decreases the uplink BLER and improves the MOS of AMR voice service by using PLVA, it has no impact on the downlink.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

4 Related Features

4
Prerequisite Features
None

Related Features

Mutually Exclusive Features


None

Impacted Features
None

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

5 Network Impact

5
System Capacity
No impact.

Network Impact

Network Performance
This feature improves the MOS of AMR voice services, especially the MOS of AMR voice services in weak coverage areas.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

6 Engineering Guidelines

6
6.2 Planning
6.2.1 RF Planning
RF planning is not required.

Engineering Guidelines

6.1 When to Use AMR Voice Quality Improvement Based on PLVA


This feature can improve the AMR voice quality in the uplink, so it can be applied in any scenario that meets the deployment requirements. For details about deployment requirements, see section 6.3.1 Requirements.

6.2.2 Network Planning


Network planning is not required.

6.2.3 Hardware Planning


This feature sets the following requirements on NodeB hardware: l l l The BTS3812E, BTS3812A and BTS3812AE must be configured with the EULPd board. The DBS3800 must be configured with the EBBCd board. The 3900 series base station must be configured with the WBBPd or WBBPf board.
NOTE

Currently, for baseband boards, only the EULPd, EBBCd, WBBPd and WBBPf boards support the PLVA feature. When the EULPd, EBBCd, WBBPd or WBBPf board is inserted together with other types of baseband boards, AMR services cannot obtain the PLVA gain if the AMR services are set up on other types of baseband boards.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

10

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

6 Engineering Guidelines

6.3 Deployment
6.3.1 Requirements
l Operating environment and hardware requirements This feature depends on NodeB hardware. For details, see 6.2.3 Hardware Planning. The uplink resource group of the cell must contain a baseband board that supports this feature. To check whether such a baseband board is contained, perform the following steps: 1. For the V200R015 NodeB, run the LST ULOCELL command to check for UL Baseband Equipment ID to obtain the uplink resource group of the cell; for the V100R015 NodeB, run the LST LOCELL command to check for UL BB Resource Group No. to obtain the uplink resource group of the cell. For the V200R015 NodeB, run the LST BASEBANDEQM command to check for Baseband Equipment ID, Cabinet No., Subrack No., and Slot No. to obtain the information about the target baseband board; for the V100R015 NodeB, run the LST ULGROUP command to check for UL BB Resource Group No., Cabinet No. of UL Process Unit, Subrack No. of UL Process Unit, and Slot No. of UL Process Unit to obtain the information about the target baseband board. Verify that the baseband board meets the requirements specified in section 6.2.3 Hardware Planning. Dependencies on other Features None l License The license has been activated. For details about how to activate the license, see License Management Feature Parameter Description. Feature ID WRFD-14020 1 Feature Name AMR Voice Quality Improvement Based on PLVA License Control Item AMR Voice Quality Improvement Based on PLVA (Per Cell) NE NodeB Sales Unit Per cell

2.

3. l

Other NEs as well as for network equipment and transmission devices from other vendors None

6.3.2 Activation
After the license is activated, this feature has been activated.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

11

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

6 Engineering Guidelines

6.3.3 Activation Observation


The VS.PLVA.User counter informs operators of the number of UEs using this feature. If the value of VS.PLVA.User counter is not 0, this feature is effective.

6.3.4 Deactivation
This feature can be disabled after the license for this feature has been deactivated.

6.4 Performance Monitoring


The gain produced by this feature is reflected by a noticeable increase in the MOS. Take 12.2 kbit/s AMR voice services as an example. In the uplink simulations, if the BLER is 1%, the MOS is increased by about 0.08; if the BLER is greater than 10%, the MOS is increased by about 0.35. (The BLER increase is generally caused by UE power limitation, fast channel change, or strong interference.) In addition, the MOS increase is generally the same under different channel fading conditions. Figure 6-1 describes the MOS comparison for AMR 12.2k voice (Simulation Result in the uplink). Figure 6-1 MOS comparison for AMR 12.2k voice (simulation result in the uplink)

The MOS gain produced by this feature needs to be tested using the MOS test instrument. Endto-end MOS tests can be performed for this feature. However, this feature provides uplink gains. In this case, the test is recommended only for the uplink MOS. Fixed-point test in the lab and drive test are available, which are described as follows: l Fixed-point test in the lab

To conduct a fixed-point test in the lab, perform the following steps: 1. 2.


Issue 01 (2013-04-28)

Deactivate this feature and calculate the MOS. Under the same conditions, reactivate this feature and calculate the MOS in the same way.
Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. 12

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

6 Engineering Guidelines

The MOS gain is obtained by the average value calculated in step 2 minus that calculated in step 1. The MOS gain is about 0.2. l Drive test

To conduct a drive test in the lab, perform the following steps: 1. 2. Determine a test route, deactivate this feature, and calculate the MOS. Under the same conditions, reactivate this feature and calculate the MOS in the same route.

The MOS gain is obtained by the average value calculated in step 2 minus that calculated in step 1. The MOS gain is over 0.1.
NOTE

In a drive test, the BLER fluctuates significantly. Therefore, the MOS gain obtained in a drive test is different from that obtained in a fixed-point test in the lab.

6.5 Parameter Optimization


Parameter optimization is not required.

6.6 Troubleshooting
None.

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

13

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

7 Parameters

7
There are no specific parameters associated with this feature.

Parameters

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

14

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

8 Counters

8
Table 8-1 Counter description Counter ID 50332258 Counter Name VS.PLVA.User Counter Description Numbers of plva user in one cell NE NodeB Feature ID Multi-mode: None GSM: None LTE: None

Counters

Feature Name AMR Voice Quality Improvement Based on PLVA

UMTS: WRFD-140201

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

15

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

9 Glossary

9
For the acronyms, abbreviations, terms, and definitions, see Glossary.

Glossary

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

16

WCDMA RAN AMR Voice Quality Improvement Based on PLVA Feature Parameter Description

10 Reference Documents

10
1. 2. 3. 4.

Reference Documents

3GPP TS 25.101, "User Equipment (UE) radio transmission and reception (FDD)" 3GPP TS 25.212, "Channel Coding and Multiplexing" 3GPP TS 26.090, "AMR Speech Codec; Speech transcoding," December 2009 License Management Feature Parameter Description

Issue 01 (2013-04-28)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

17

S-ar putea să vă placă și