Documente Academic
Documente Profesional
Documente Cultură
1. Groundwork
Dig safely
Follow the KLIC procedure when performing excavation work; Only perform excavation work after liaising with the operator; Make trial trenches where necessary.
6. Work permit
Make sure you have a valid and complete work permit
Record the work clearly; Specify the risks and discuss the measures; Check whether the workplace is safe, also in the event of extensions or reductions; Take note of other work being performed in the surrounding area; In the event of an extension, check that the circumstances have not changed.
2. Conned spaces
Be sure that conned spaces can be entered safely
Never enter the area without a release tag; Always place a look-out man at the entrance; Measure the oxygen concentration continuously; Ensure the availability of suitable life-saving devices, protection and communication measures; Ensure that electrical voltage is below a safe threshold while work is being performed.
3. Working at height
Work safely at height (> 2.5 metres)
Work only on ladders that are displaying a release tag; Use a safety harness where necessary; Only work on a ladder if it is stable and at the correct angle; Remain alert to the risk of falling materials.
5. Road Safety
Drive safely
Adhere to the trafc regulations, also at installations; Ensure that you are rested when you start a journey and stop whenever you feel tired; Ensure that loading does not pose any problems; Always pay full attention to driving; Never use your mobile in the car when you are driving, unless there is imminent danger; Adapt your driving behaviour to the changing circumstances (fog, low sun, temperature).
10. Smoking
Do not smoke outside designated smoking areas
The smoking ban must be strictly observed; Inform the operator/regulator in the absence of a special smoking area.
...Think Safety!