Documente Academic
Documente Profesional
Documente Cultură
mm
No. M1004
170
2
CONVENTIONAL TOOLS
Flat Type Short OFFSET Wrench Set (4pcs.) M100-78, 1012, 1214, 1417 No. S1S2 D1 D2 T1 T2 L
12 16 18 21 25 32
13 18 21 25 28 35
18 34 50 72 95 120
10 10 10 10 10 10
D1 S1 L T1
S2 D2
T2
mm
330
L
S D 15 S L 10 45 T 45 10 D T 15
M27- 8H 8 13 5 175 40 10 -10H 10 16 6 195 57 10 -12H 12 18 7 220 86 10 -14H 14 21 8 240 120 10 15 symmetric angle can enable this wrench used as Bi-hexagonal wrench. No chamfering on hexagonal end for bigger contact between bolts and the wrenches. Comfortable grip for applying torque easily.
DOUBLE-FLEX RATCHET OFFSET WRENCH SET (2pcs.) mm
230
MRW-0810F, 1214F D2 T1 T2 L
90 110 140
10 10 10
OFFSET WRENCHES
Special Feature Tight fastening possible in double heads. The pitch between the ratchet offset section and the hinge section is shortened while the thickness is designed as a thin-flat type, allowing smooth continuous operation in narrow areas. Fine adjustments and operation can be conducted due to the 5 ratchet feed angle. The operating direction is easy to grasp as the overall form is asymmetrical and the tightening/loosening direction is indicated using arrows. The shape of the handle makes it easy to grip.
CAUTION
T1 L
T2
mm
580
DO NOT APPLY EXCESSIVE POWER ON THE JOINT PART. THE RATCHET END IS ONLY FOR TEMPORARY FASTENINGS. DO NOT USE IT FOR PERMANENT FASTENING.
mm
No.
S1S2
D1
D2
T1
T2
21 23 25 26.5 28 30.5 32 34
5 5 5 5 5 5 5 5
109
2
CONVENTIONAL TOOLS
OFFSET WRENCHES
mm
No.
8 10 12 13 14 17 19
17 19 23 24 26 31 34
8 8 9 9 10 12 13
38.5 39 46 47 52 62 68
25 28 43 45 50 105 135
1 1 1 1 1 1 1
DO NOT APPLY EXCESSIVE POWER ON THE JOINT PART. THE RATCHET END IS ONLY FOR TEMPORARY FASTENINGS. DO NOT USE IT FOR PERMANENT FASTENING.
mm
640
10
D1
D2 S1 S2 T L
RM-89
17 17 22 24 29
19 22 24 29 33
10 10 11 14 14
10 10 10 10 10
* When the diameter is 14mm or larger, the socket has 12 points. Smooth ratcheting operation. Thin and round shaped head for use in confined spaces. For light-load operation. The feed angle is 20.
CAUTION
ENSURE THAT THE SWITCH LEVER HAS BEEN SET PROPERLY, OTHERWISE IT MAY CAUSE DAMAGE OR IDLING. THIS IS ONLY FOR TEMPORARY FASTENINGS. DO NOT USE IT FOR PERMANENT FASTENINGS.
mm
No.
MR-0813 -1014
S1S2
D1
D2
21 25
25 28
15 15
143 166
130 160
10 10
The socket is thin enough to operate in narrow quarters. The grip, with its wave form, is easy to hold and apply load. The green color is distinguishable in the workplace. it is also lightweight because it is made of plastic
CAUTION
D1 T L
D2
ENSURE THAT THE SWITCH LEVER HAS BEEN SET PROPERLY, OTHERWISE IT MAY CAUSE DAMAGE OR IDLING. THIS IS ONLY FOR TEMPORARY FASTENINGS. DO NOT USE IT FOR PERMANENT FASTENINGS.
mm
No.
Nominal Size h1
h2
h3
h4
D1 D2
T1
T2
MR-0813L 812 1013 10 17.5 15 17.5 21 25 34.5 44.5 143 180 10 -1014L 1013 1214 15 18 15 30 25 28 39.5 57.5 166 230 10
The socket is long enough to operate in deep quarters. The grip, with its wave form, is easy to hold and apply load. The green color is distinguishable in the workplace. It is also lightweight because it is made of plastic.
CAUTION
D1
D2
h1 T1 h3 L
h2 T2 h4
ENSURE THAT THE SWITCH LEVER HAS BEEN SET PROPERLY,OTHERWISE IT MAY CAUSE DAMAGE OR IDLING. THIS IS ONLY FOR TEMPORARY FASTENINGS. DO NOT USE IT FOR PERMANENT FASTENINGS.
110