Documente Academic
Documente Profesional
Documente Cultură
com
Wire wound and alloy ribbon element options. Moulded resistor construction. Tape and reel packing for pick & place machine. Fusible type available. Non inductive type available. Impulse resistors as per IEC 61000-4-5 0.6W to 3W R005 to 13K
HRW SERIES
e : info@htr-india.com
www.htr-india.com
PHYSICAL CONFIGURATION
WIRE WOUND, LOW OHM CURRENT SENSE SURFACE MOUNT POWER RESISTORS
HRW
HTR WATTS A TYPE 0.51 SM0.6 SM1 SM2 SM3 0.6 1.0 2.0 3.0 5.14 6.25 11.56 15.88
RESISTANCE RANGE J 0.51 MIN MAX 3.42 3.45 5.74 5.74 R01 R005 R01 R005 1K 1K 5K 13K
WT. (TYP) 0.08 Gms. 0.10 Gms. 0.90 Gms. 1.50 Gms.
MECHANICAL SPECIFICATION
PARAMETER / PERFORMANCE TEST & TEST METHOD Resistance to Soldering heat - (260C-270C for 10 Secs) Leaching (260C Solder immersion,60 sec.) Flammability PERFORMANCE REQUIREMENTS 0.1% + 0.05 Typical No visible leaching. Resistor shall not emit fire/flame, which even if it occurs will self extinguish within seconds
e : info@htr-india.com
www.htr-india.com
DIMENSIONAL TABLE
HTR SERIES HRW HRW HRW HRW HTR TYPE SM0.6 SM1 SM2 SM3 2010 2412 4527 6927 1.98 3.81 8.05 12.04 8.33 8.79 14.86 18.85 3.18 2.49 3.40 3.40 3.20 3.20 3.94 3.94 0.66 1.27 2.36 2.36 PACKET SIZE L (Ref ) M (Ref ) N (Ref ) O (Ref ) P (Ref )
WIRE WOUND, LOW OHM CURRENT SENSE SURFACE MOUNT POWER RESISTORS
HRW
TERMINATION
Material : Copper Grade. Plating Details : Tin Plating Of 6.0 Micron (Min)
MARKING
Marking notes a) First line stands for HTR logo in 2W & 3W size & not applicable for 0.6W & 1W size. b) Second line stands for resistance value for eg. 0.01OHM = R01, 0.1OHM = R10, 1OHM = 1RO, 10OHM = 10R, 100OHM = 100R, 1000OHM = 1K0 followed by TOL. Letter "F" stands for TOL, 1%, Letter "G" stands for TOL, 2%, Letter "H" stands for TOL, 3%, Letter "J" stands for TOL, 5%, Letter "K" stands for TOL, 10%. It is applicable for all wattages. Marking for SM2-2W & SM3-3W Resistor Marking for SM1-1W Resistor Marking for SM0.6-0.6W Resistor
PACKING
a) BULK PACKING : FOR SM0.6 =} 2500 Resistors shall be packed in small box I Type of approximate size 70mmx70mmx70mm. FOR SM1 =} 2000 Resistors shall be packed in small box I Type of approximate size 70mmx70mmx70mm. FOR SM2 =} 1000 Resistors shall be packed in small box I Type of approximate size 70mmx70mmx70mm. FOR SM3 =} 500 Resistors shall be packed in small box I Type of approximate size 70mmx70mmx70mm. b) TAPE & REEL PACKING :
REEL SPECIFICATION
C
132
e : info@htr-india.com