Documente Academic
Documente Profesional
Documente Cultură
1. HW overview
The RBS 2409, a member of the RBS 2000 family, is an indoor pico base station intended for IP transmission. The RBS 2409 only supports GSM 1800 or GSM 1900. RBS 2409 contains two BSS nodes: STN and BTS.
Inter ANT
DC power
OMT and IP
transmission Interface
Interface
3. HW site configuration The site configuration steps consists of two parts : STN configuration and BTS configuration. a. BTS configuration BTS Software: BTS 07B OMT version: R33 and later OMT New cable: RPM 119 0554/05000 Setting IDB parameters
In create IDB setup option, we must only select two cabinets, otherwise the OK button in window is not allowed to click.
Another RBS cabinet must be added to the configuration. In fact, No.1 is no useful
When adding HW in cabinet, only add one MO RBS2409-0 into present window, and then click ok.
4). telnet 192.168.1.1 STN requests for a username and a password user: admin pwd: hidden The STN presents the STN-CLI prompt Note: the action of inputting user and PWD must be finished in thirty seconds, otherwise STN should be locked automatically, its hold-time ten minutes.
5). Upgrade SW
Prerequisite: STN SW: The file with the new software to be downloaded is a .tgz file
after node restart, check node stauts getSWSessionStatus s1 endSWSession s1 uselocalsftp off
Restart
6). Backup configuration file Startsession s1 uselocalsftp on download s1 sftp://lrw:lrw123@192.168.1.9/test20120310_CM.xml 30 getSessionStatus s1 uselocalsftp off additional SNT PPPoE and IPsec DT
C:\Users\erongli\ Desktop\2409_DT
getmoattribute STN=0,Security=0,IKEPeer=peer0