Documente Academic
Documente Profesional
Documente Cultură
2011/05/13
SANS 10400 XA
Compulsory
2011/05/13
2011/05/13
2011/05/13
2011/05/13
2011/05/13
Overall Conclusion
Walls with higher CR i.e. that contain adequate C-values and Rvalues are preferred for minimising heating and cooling energy consumption in all of the climate zones. In many regions, the R-value of the wall system plays a significant role in reducing energy use. However, with sufficient C-value, minimal levels of additional resistance are required to achieve reduced energy consumption. R-value alone is inadequate to achieve desired energy consumption levels.
Overall Conclusion
From a long term cost perspective, the optimal solution is to use a cavity wall, with face brick exterior and add only the insulation required for the specific building design and climatic conditions. In some cases, a well sealed air cavity will suffice.
2011/05/13
A Novel Algorithm
2011/05/13
2011/05/13
10
2011/05/13
Air-Cell Permicav
Breathable Insulation for Cavity Walls
11
2011/05/13
Air-Cell Permicav
Breathable Insulation for Cavity Walls
Air-Cell Permicav
Breathable Insulation for Cavity Walls
12
2011/05/13
Air-Cell Permicav
Breathable Insulation for Cavity Walls
Isoboard
Cavity Wall Insulation
13
2011/05/13
Isoboard
Cavity Wall Insulation
Isoboard
Cavity Wall Insulation
14
2011/05/13
Technopol
Technopol
15
2011/05/13
Technopol
Technopol
16
2011/05/13
Technopol
17
2011/05/13
18
2011/05/13
Green Star SA
Multi Unit Residential Pilot
Green Star SA
Multi Unit Residential Pilot
19
2011/05/13
Impact Assessment
Classification and Characterisation
20
2011/05/13
AusLCI
Nationally Coordinated Approach Aim to provide a single national repository of Australian LCI information
ICIP Grant
What is LCA?
21
2011/05/13
ECO LABELS
190 Products Recently Launched
22
2011/05/13
Estimated Costs
Identify and publish suitable clay masonry insulation R50,000 solutions to our customers.
Independent research and recommendations into thermal R320,000 mass design guidelines for SA buildings, published and presented in seminars in major centres. Publish a peer reviewed academic paper in a leading R20,000 journal about thermal mass in walling in SA, and the use of CR values.
Estimated Costs
R70,000
Define / access a standard test method, or determine R25,000 whether standard tables can be used for specific heat capacity values for layers in a wall. ClayBrick industry to determine its carbon footprint baseline R50,000 and set up monitoring and reporting.
23
2011/05/13
Category B: Education
Invite ALCAS President to ClayBrick for in house LCA workshop. CPD lecture improvement / additional lecture material.
Estimated Costs
R50,000
R20,000
R25,000
R50,000
Estimated Costs
R20,000
The SANS 10400 and 204 series will require ongoing involvement. Participate in further Green Star Tool development.
R10,000
R10,000
Category D: Other
Travel & subsistence.
Estimated Costs
R30,000
24
2011/05/13
25
2011/05/13
Thank You!
26