Sunteți pe pagina 1din 32

SVEDALA COMPACTION AND PAVING

DYNAPAC CC222/232/C
CC422/522/C
CA 602/512
WORKSHOP MANUAL
HYDRAULICDIAGRAM
W1050-1 EN

Svedala Compaction Equipment AB


Box 504, SE-371 23 Karlskrona, Sweden
Telephone +46 455 627 00
Telefax +46 455 627 30

Vibratory and Combination Rollers


CC 222/232/C and CC422/522/C
CA 602/512
Work Shop Manual,Hydraulic diagram
W1050-1 EN

We reserve the right to change specifications without notice.


Printed in Sweden.

Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram

Contents

Contents

Page

Safety regulations ................................................................................................................. 5-6


Hydraulic diagrams ............................................................................................................ 7-28
Hydraulic diagram 1/2 CC222/232/C .................................................................................. 7
Hydraulic diagram 2/2 CC222/232/C .................................................................................. 8
Propulsion CC222/232/C ..................................................................................................... 9
Brakes CC222/232/422/522/C ............................................................................................. 10
Vibrations both drums CC222/232 ...................................................................................... 11
Vibrations front drum only CC222/232 ............................................................................... 12
Vibrations combi machine CC222C/232C .......................................................................... 13
Steering straight forward CC222/232/C .............................................................................. 14
Steering right turn CC222/232/C ......................................................................................... 15
Hydraulic diagram 1/2 CC422/522/C .................................................................................. 16
Hydraulic diagram 2/2 CC422/522/C .................................................................................. 17
Propulsion CC422/522/C ..................................................................................................... 18
Vibrations both drums CC422/522 ...................................................................................... 19
Vibrations front drum only CC422/522 ............................................................................... 20
Vibrations combi CC422C .................................................................................................. 21
Steering straight forward CC422/522/C .............................................................................. 22
Steering right turn CC422/522/C ......................................................................................... 23
Hydraulic diagram 1/2 CA602/512 ..................................................................................... 24
Hydraulic diagram 2/2 CA602/512 ................................................................................... 25
Propulsion CA602/512 ........................................................................................................ 26
Vibrations CA602/512 ......................................................................................................... 27
Steering CA602/512 ............................................................................................................ 28

Hydrauliccircuit diagram CA/CC W-1050-1 EN

Safety Regulations
General advice
Make yourself familiar with the equipment of the machine.
Only operate the machine if your are completely familiar with the
operating and control elements as well as the functioning of the machine.
Use your safety equipment like helmet, safety shoes and hearing protection.
Make yourself familiar with your working field.
Only operate the machine for its intended purpose.

Please observe the guidelines of the machine manufacturer


and safety manual, A 281.

Before starting
Study and understand the operating instructions before starting.
Check the machine for any serious faults.
Do not operate the machine with defective instruments, warning lights or control
elements.
All safety devices must be in a secure position.
Do not carry loose objects or secure them to the machine.
Keep oily and inflammable material away from the machine.
Before entering the driver's cab, check if persons or obstacles are in the way of or
underneath the machine.
Be careful when entering the driver's cab, use the steps.
Adjust your seat before starting.

Hydrauliccircuit diagram CA/CC W-1050-1 EN

Safety Regulation contd.

Start
When starting, all operating levers must be in neutral position.
Only start the machine from the drivers seat.
Check the indicating instruments after start to ensure that all functions are in
order.
Do not leave the machine unattended when the engine is running.
When starting with battery connection cables, connect plus to plus and minus
to minus.
Disconnect the earth (negative) first. Connect it last.

Warning
Exhaust fumes is dangerous. Ensure sufficient fresh air when starting in closed
rooms!

Electrical and hydraulic equipment


1.
2.
3.
4.
5.

6.

7.

Personal safety must be observed when batteries are handled or tested.


A fully equipped medical kit, including eye-wash facilities, should be available
and protective clothing, including eye protection, should be worn.
Acid splashes in the eye should be treated immediately with plenty of clean
water and neutralized with sodium bicarbonate solution.
Acid splashes on clothing must be treated with an alkali, such as ammonia, if
holes are to be avoided.
A safety hazard exist during or after battery charging due to emission of a
highly flammable hydrogen gas. Any testing involving production of sparks, e.g.
electrical load test, must not be performed until the gas has dispersed from the
cell. A similar hazard occurs when a battery is fitted on to a vehicle immediately
after the battery has been removed from a charging plant.
Hydraulic equipment is under high pressure.
Fluids (fuel, hydraulic oil) which escape under high pressure can penetrate the
skin and cause serious injury.
Therefor immediately consult a doctor if such injury occurs.
Notice that failure on the hydraulic or electrical system may give the roller an
unpredictable and dangerous function.
Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

10

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

11

12

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

13

14

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

15

16

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

17

18

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

19

20

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

21

22

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

23

24

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

25

26

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

Hydrauliccircuit diagram CA/CC W-1050-1 EN

27

28

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

DYNAPAC CA152 Hydraulic diagram


Hydrauliccircuit diagram CA/CC W-1050-1 EN

29

DYNAPAC CA152 Hydraulic diagram


30

Hydrauliccircuit diagram CA/CC

W-1050-1 EN

S-ar putea să vă placă și