Documente Academic
Documente Profesional
Documente Cultură
The fully enclosed high-pressure spindle with mechanical power intensifier is maintenance-free and extreely hard-wearing. The optimized chip guard guarantees high functional reliability with a minimum of cleaning. The outlet in the base allows coolant and chips to flow out.
Size mm 200 e mm 70 o mm 60 f mm 164 r mm M16 Max. clamping force kN 80 g mm 30 s mm 22 Weight kg 85 h mm 60 t mm 21 a mm 530 i mm 140 x mm 70 b mm 620 k mm 85 y mm 178 c mm 140 m mm 234 S1 mm (0)17263 d mm 202 n mm 20 S2 mm 187433
Technical Details:
robust base (GGG 60 spheroidal graphite cast iron) all surfaces ground and polished; hardened guideways fully enclosed and nitided spindle with mechanical power intensifier the clamping force preselection feature enables the required clamping forces to be preset and exactly reproduced 5 connecting threads for workpiece stops on each side end face with groove and securing holes for vertical use clamping width on the high side: 17 - 263 mm clamping width on the high side with attachment jaw supplied: 0 - 245 mm clamping width on the step side: 187 - 433 mm
Compatibility with NC 200 from earlier series (up to 1998) The NC high-pressure vice, Version TC 200:
is a TC version. The vice can also be mounted on NC 200 bases (up to 1998) has the jaw interface (fixed/mobile) of the current LC/TC 160/200 series. All current accessory jaws and self-made jaws can be used has, in addition, the jaw interface (fixed) of the earlier series up to 1998. This allows the use of self-made jaws from before 1998. can be used on vertical centres alongside the old design (up to 1998). The fixed jaws are aligned and the vice base height is compatible (see Fig. 1) permits mixed use of old and current clamping jaws in some cases (see Fig. 2).
Allmatic-Jakob Spannsysteme GmbH Jgermhle 10 D- 87647 Unterthingau Tel.: +49 (0) 8377 / 929 - 0 Fax: +49 (0) 8377 / 929 - 380 www.allmatic.de info@allmatic.de 01.04.2007
nderungen vorbehalten!