Documente Academic
Documente Profesional
Documente Cultură
201
You can use NAT to allow PCs from LAN subnet for accessing Internet.
LAN IP Setting :
IP Address
192
168
2 Fixed-IP
IP Address Default Router IP Address Subnet Mask
10
. . .
. . .
. . .
204
10
254
255
255
255
Enter the IP address, Default Router IP address and Subnet Mask provided to you by your ISP in the appropriate fields above.
3.PPPoE Type
PPPoE Configuration :
Use PPPoE Authentication
User Name(MAX. 40 characters) : Password(MAX. 40 characters) : Confirm password : Enter the User Name and Password required by your ISP.
2. Advance Setup
WAN Setting: Set WAN port network parameters. LAN Setting: Set LAN port network parameters. Virtual Server: Set virtual server like WEB,FTP or E-MAIL server. DDNS Setting: Set DDNS server IP address. Network Management: Set web server,telnet server port VoIP Basic: Set VoIP basic parameters such as VoIP protocol selection, phone number. Dial Plan: Set outbound and inbound dial plan. Advance Setting: Set advance parameters such as codec,voice volume Hot Line Setting: Set Hot Line number Port Status: Display current telephone port status
2.1
WAN Port Type Configuration:
WAN Type Setting IP Address Subnet Mask Default Router
NETWORK SETUP
DHCP
Select
Let WAN and LAN Port as Bridge Let PCs in LAN subnet can access Internet
LAN IP Address Setting
192
168
255.255.255.0
Enable
Disable
Apply
Private IP
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
192.168.0. 192.168.0. 192.168.0. 192.168.0. 192.168.0. 192.168.0. 192.168.0. 192.168.0. 192.168.0. 192.168.0.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Apply
Disable Note
0.0.0.0
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
Both
Both Both Both Both
0.0.0.0
0.0.0.0 0.0.0.0
Both
Both Both
Apply
Reset
Bottom of Form
DDNS(Dynamic DNS) Service Configuration:
DDNS Service Dynamic DNS allows you to provide Internet users with a domain name (instead of an IP Address) to access your Virtual Servers.
Select
w w w .ddns.org
DDNS password DDNS domain name Get DNS Server IP DNS Server IP
Manual
168.95.1.1
Auto
Apply
80
23
Apply
VOIP SETUP
VoIP Basic Configuration
H.323
Select
Port 1 E.164 Number Port 2 E.164 Number Port 3 E.164 Number Port 4 E.164 Number
813 814
815
816
none none
none
none
. .
0 0
. .
0 0
. .
0 0
Disable
Apply
Outgoing Dial Plan: (maximun 50 entries, maximun length of prefix digits is 16 digit, maximun length of number is 20 digit) Length of Number 3 ~ 20 3 ~ 20 3 ~ 20 3 ~ 20 Delete Length 0 0 0 0 Destination IP/DNS 10.5.1.250 10.5.1.250 10.5.1.250 10.5.1.250
Item 1 2 3 4
Operation
From
To
Incoming Dial Plan: (maximun 50 entries, maximun length of prefix digits is 16 digit, maximun length of number is 20 digit): Length of Number Destination Register telephone to GK port
Item
Incoming no.
Delete Length
Prefix no.
Operation
From
To
Advance Setting
VoIP Advance
Select
Fast-Start
T38UDP Low Speed Redundancy Level T38UDP High Speed Redundancy Level
H.323 Registration Type H.323 RRQ TTL GK RRQ Polling Period H.323 Autoanswer MAC Authentication H.245 Fast Capability Exchange H.323 Info Capability Watchdog VoIP Encryption VoIP Encryption Port
0
120
5 0
Terminal
On Enable Enable
Apply
Disable
4
Enable sec
Port 1 number
809
Port 2 number
810
Port 3 number
811
Port 4 number
812
Apply
@
Port Status:
Port No. 1 2 3 4
Type
IN
OUT Duration 0 0 0 0 0 0 0 0
FXS onhook none FXS onhook none FXS onhook none FXS onhook none
3. SYSTEM ADMINISTRASION
Save and Reboot
The system begins to save and reboot, please wait a moment and relogin.
Apply
Access Control :
Administrator Username and Password Username Password Confirm Password Guest Username and Password Username Password Confirm Password
guest admin
Apply
Simple Network Time Protocol (SNTP) : To synchronize Gateway clocks in the Internet
Enable NTP Server1 IP NTP Server2 IP NTP Server3 IP Disable
133.100.9.2
<> <>
131.107.1.10
.
514
Apply
Auto Get
0
0
. .
0
0
. .
. .
0
0
Apply/Get