Documente Academic
Documente Profesional
Documente Cultură
Tapflo quality
The Tapflo pump is usually an essential part in the process with hazardous fluids. We always strive to supply the safest and most environmental friendly solution for these fluids. As a part of our safety thinking, we are in the frontline following important standards, guidelines and directives. Many of our products comply with the EC ATEX directive for equipment in explosion hazardous environments. All our pumps are of course CE marked and followed by our comprehensive instruction manuals. Tapflo is an ISO 9001:2001 certified company.
The CT range
CT
With 2900 rpm motor: CTAA-03 7 m3/h, 10 m CTAA-05 12 m3/h, 10 m CTBB-07 17 m3/h, 11 m CTCC-15 19 m3/h, 22 m CTCC-22 34 m3/h, 22 m CTCE-22 20 m3/h, 31 m CTDD-40 50 m3/h, 22 m CTDF-40 28 m3/h, 35 m CTDF-60 42 m3/h, 35 m CTDG-60 30 m3/h, 47 m CTEF-55 42 m3/h, 35 m CTEG-55 30 m3/h, 47 m With 1450 rpm motor: CTAA-024 7 m3/h, 2.7 m CTBB-054 9 m3/h, 2.8 m CTCC-114 18 m3/h, 5.5 m CTCE-114 22 m3/h, 7.7 m CTDD-224 25 m3/h, 5.5 m CTDF-224 34 m3/h, 8.7 m CTDG-224 42 m3/h, 12.0 m
CT is an open impeller centrifugal pump, manufactured from stainless steel AISI 316L. With excellent electro polished surfaces, high finish and mechanical strength, the CT range meet the demands from a variety of todays industries. After all, CT is still available at a very appealing price level.
Explosion proof models available according to the ATEX directive, group II, cat 2.
Food-, beverageand pharmaceutical industries A variety of auxiliary applications, like transfer of water, edible oil, alcohols, detergents and CIP cleaning liquids Chemical industry Transfer of a variety of mild chemicals and solvents Mechanic industries Handling of water and coolants etc 3
CT
16 15 90
13 11
12 18
Options and special executions Hygienic motor shroud and baseplate in stainless steel (above) Long coupled pump on baseplate allowing temperatures up to 180C (right) Heating jacket to maintain a certain temperature Flushed seal (water or oil) Drain plug
Interchange ability mechanical seal Many different seal faces are available, to suit different liquid types. The internal mounting provides superior cooling from the liquid.
Solids with open impeller The open type impeller is insensitive for solids. Maximum size of solids is 6 mm, or even bigger if soft. The one-piece high finish design provides silent pumping.
Flexible choice of drive The smart design of this shaft extension allows fitting any IEC standard type motor to the pump. I.e. you are able to choose required voltage, protection class, explosion protection etc.
Technical data
Performance curves
The performance curves are based on water at 20C.
CT
Technical data
Dimensions
Dimensions in mm, where other is not indicated Optional connections
Model Optional connections SMS DIN 11851 Ra CTAA CTBB CTCC CTCE CTDD CTDF CTDG CTEF CTEG 1 1 1 1 2 2 2 2 2 Ri 1 1 1 1 2 2 2 2 2 Ra 25 40 40 40 65 65 65 65 65 Ri 25 32 40 40 50 50 50 50 50
CT
General dimensions
Model Motor IEC power motor (kW) CTAA-03 CTAA-05 CTBB-07 CTCC-15 CTCC-22 CTCE-22 CTDD-40 CTDF-40 CTDF-60 CTDG-60 CTEF-55 CTEG-55 CTAA-024 CTBB-054 CTCC-114 CTCE-114 CTDD-224 CTDF-224 CTDG-224 0.37 0.55 0.75 1.5 2.2 2.2 4 4 6.0* 6.0* 5.5 5.5 0.25 0.55 1.1 1.1 2.2 2.2 2.2 size 71 71 80 90 90 90 112 112 112 112 132 132 71 80 90 90 112 112 112 1 1 1 1 60 60 63 64 64 64 70 70 70 70 70 70 60 63 64 64 70 70 70 359 359 393 444 444 444 493 493 521 521 586 586 359 393 444 444 493 493 521 36 36 50 66 66 66 92 92 92 92 92 92 36 50 66 66 92 92 92 100 100 110 160 160 160 71 71 80 90 90 90 197 197 208 228 228 228 255 255 262 262 304 304 197 208 228 228 255 255 262 90 90 100 125 125 125 140 140 140 140 140 140 90 100 125 125 140 140 140 112 112 125 150 150 150 172 172 168 168 208 208 112 125 150 150 172 172 168 73 73 86 103 103 103 128 128 128 128 128 128 73 86 103 103 128 128 128 7 7 9 10 10 10 12 12 12 12 12 12 7 9 10 10 12 12 12 147 112 135 147 112 135 153 125 153 169 140 170 169 140 170 169 140 170 195 160 197 195 160 197 195 190 222 195 190 222 195 216 242 195 216 242 147 112 135 153 125 153 169 140 170 169 140 170 195 160 197 195 160 197 195 190 222 Ra Ri A B** C D E F G H** I J K L M**
1 1 1 1 1 1 2 2 2 2 2 2 1 1 2 2 2 2 2 2 1
1 1 1 1 2 2 2 2 2 2
* = Special motor with increased power. Not available in EX-proof version ** = This dimension may vary depending on motor brand
Technical data
Ordering a CT pump
The CT pumps are available in standard version as well as special versions to suit any requirements. The standard CT pumps
CT
Bare shaft pumps (no motor) CTAA CTBB CTCC CTCE CTDD CTDF CTDG CTEF CTEG
Pumps with 2900 rpm motors CTAA-03 CTAA-05 CTBB-07 CTCC-15 CTCC-22 CTCE-22 CTDD-40 CTDF-40 CTDF-60 CTDG-60 CTEF-55 CTEG-55
Pumps with 1450 rpm motors CTAA-024 CTBB-054 CTCC-114 CTCE-114 CTDD-224 CTDF-224 CTDG-224
These standard models have the following configuration: Mechanical seal: Casing o-ring: Motor (not for bare shaft pumps): Connections: Ceramic/graphite/EPDM Silicone IP55, 3-phase 220/380V, 50 Hz, IEC frame B3/B14 External BSP threads
CT
- 1S3D -
03 P
Pump options Mechanical seal: blank* = ceramic/graphite/EPDM 1CGV = ceramic/graphite/FKM 1SSE = SiC/SiC/EPDM 1SSV = SiC/SiC/FKM 1CGF = ceramic/graphite/FEP 1SGE = SiC/graphite/EPDM 1SGV = SiC/graphite/FKM Connections: blank* = BSP external thread 3D = DIN 11851 thread 3S = SMS food thread 3F = Flange DIN, PN10/16 3A = Flange ANSI 150 3C = Clamp ISO 2852 3P = Clamp DIN 11850 3T = Clamp DIN 32676 Optional executions: 4J = Heating jacket 4K = Drain plug 4F = Flushed seal 4Z = Oil lubricated seal
Motor power (IEC motor size) 2900 rpm motors: 03 = 0.37 kW (71) 05 = 0.55 kW (71) 07 = 0.75 kW (80) 15 = 1.5 kW (90) 22 = 2.2 kW (90) 40 = 4.0 kW (100) 60 = 6.0 kW (112), special increased power 55 = 5.5 kW (132) 1450 rpm motors: 02 = 0.25 kW (71) 05 = 0.55 kW (80) 11 = 1.1 kW (90) 22 = 2.2 kW (100)
* = Standard execution
Exclusive Distributor of
Products
+61 (0) 7 3889 7877 Direct +61 (0) 7 3889 7700 Fax sales@primepump.com.au
www.primepump.com.au