Documente Academic
Documente Profesional
Documente Cultură
po
E
Two component
solvent free epoxy
adhesive for
construction joints and
for monolithic sealing
of cracks in screeds
• Reinforcement of beams by means of the plated All loose and crumbling parts, dust, cement laitance and
concrete technique. traces of form-release oils and paint must be eliminated
by careful sandblasting or brushing.
• Sealing cracks in cement screeds.
When applying the product to metal, remove any rust
TECHNICAL CHARACTERISTICS and grease residues beforehand, preferably by means of
Eporip is a solvent-free epoxy adhesive consisting of sand-blasting to white metal.
two pre-measured components (part A = resin, part B =
hardener) that have to be mixed before use. Preparing the mix
The two Eporip components have to be mixed. Pour
Eporip has the consistency of a slightly thixotropic part B (white) into part A (black) and mix with a trowel
paste that can be applied by brush on both horizontal for small quantities or with a drill fitted with a low speed
and vertical surfaces. stirrer for large batches until the mix is perfectly smooth
and even (the same grey all through).
Eporip polymerises without shrinkage and, after curing,
is waterproof, possesses excellent dielectric properties Do not use partial amounts to avoid the risk of
E PRODUCT IDENTITY
Component A Component B
Cleaning WARNING
Tools used to prepare and apply Eporip must N.B. Although the technical details and
be cleaned with solvents (ethyl alcohol, xylol, recommendations contained in this report
toluol, and so on) immediately after use. correspond to the best of our knowledge and
experience, all the above information must, in
CONSUMPTION every case, be taken as merely indicative and
Consumption varies, depending on subject to confirmation after long-term
irregularities in the substrate and the method practical applications; for this reason, anyone
used in application. who intends to use the product must ensure
beforehand that it is suitable for the
Generally speaking: envisaged application. In every case, the user
alone is fully responsible for any
• construction joints with a rough substrate: consequences deriving from use of the
0.5-0.7 kg/m2 product.
OCCUPATIONAL HEALTH
366-3-2002
AND SAFETY
MANAGEMENT SYSTEMS
MAPEI PLANT IN
ROBBIANO DI MEDIGLIA (MI)
MAPEI FRANCE MAPEI INC - CANADA RESCON MAPEI AS - NORWAY MAPEI KFT. - HUNGARY MAPEI FAR EAST Pte Ltd MAPEI Sro - CZECH REP.