Documente Academic
Documente Profesional
Documente Cultură
CASD60 Benefits
Specifically designed for solar tracking applications Designed to perform up to 20 years Limited backlash High accuracy Low current consumption Plug and play solution Assembled, lubricated, and sealed for life Designed to withstand severe outdoor conditions Maintenance free
CASD60
Dimensional drawing
Linear actuators
34
20
180,8
85,6
120
160
87
80
50
12
25
+ 0 0 ,0 5
25
+ 0 0 ,0 1
Technical data Unit Dynamic load (push/pull) Static load (push/pull) Speed Stroke Voltage Integrated limit switches Feedback positioning Feedback positioning resolution Operating temperature Type of protection N N mm/s mm V pulses/mm C IP CASD60 12 000 60 000 (up to 1 000 mm stroke) up to 2,5 up to 1 500 12/24 V DC or 120/230 V AC optional optional (encoder) 49 or 67 20 to +60 65
20
Linear actuators
Trunnion mount designs
25 +0,071 0,010
CASD60
120
Trunnion 25 mm bushings
20
0 25 0,05
160
Trunnion 25 mm pins
Connecting diagram
12/24 V DC + 5V+ GND 1,5K 1,5K Hall A Hall B DIN8 plug 1+7 2+4 Blue Limit switches Red 2 Hallsensors signal Option 3 5 6 8
M
Actuator
120
20
Telemag CPT
Mechatronics
Services
Drawing on five areas of competence and application-specific expertise amassed over more than 100 years, SKF brings innovative solutions to OEMs and production facilities in every major industry worldwide. These five competence areas include bearings and units, seals, lubrication systems, mechatronics (combining mechanics and electronics into intelligent systems), and a wide range of services, from 3-D computer modelling to advanced condition monitoring and reliability and asset management systems. A global presence provides SKF customers uniform quality standards and worldwide product availability.
Ordering key
C A S D 6 0
Type Motor type: 12 V DC 24 V DC 120 V AC 230 V AC Maximum Dynamic Load/Speed: 12 000 N - 1,8 mm/s Screw type: Trapezoidal Stroke in mm: For 3-digit stroke dimension: For 4-digit stroke dimension: Installed dimension in mm*: For 3-digit installed dimension: For 4-digit installed dimension: IP protection: IP65 Front attachment: 25 mm rod end 20 mm rod end Other Rear attachment: Trunnion 25 mm pins Trunnion 25 mm bushings Other Option 1: None Limit switches Other Option 2: None Encoder Other Distance between front attachment and trunnion mount. * A B N P 1
1 A
N 0 0
SKF is a registered trademark of the SKF Group SKF Group 2012 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB MT/P8 12235 EN July 2012
skf.com