Documente Academic
Documente Profesional
Documente Cultură
EN
DE
FR
ES
IT
PL
RU
Document Copyrights
No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola.
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.
Trademarks
MOTOROLA and the Stylized M logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. 2007 2013 by Motorola Solutions, Inc.
NOTES
Table of Contents
Introduction .................................................................................................................... 1 System Installation Requirements ............................................................................... 1 Programming Cables.................................................................................................. 2 Access Rights............................................................................................................. 2 Customer Programming Software (CPS) Installation Instructions ........................... 3 Radio Management Installation Instructions .............................................................. 5 Additional Installation Instructions for Hardened Operating Systems..................... 7 Tuner Installation Instructions ..................................................................................... 8 AirTracer Installation Instructions ............................................................................... 9 Repeater Diagnostics and Control (RDAC) Installation Instructions .................................................................................................................. 10 ....................................................................................................................................... 10 Troubleshooting with Installation .............................................................................. 11 Silent Installation Instructions.................................................................................... 12 Additional Installation Instructions for Windows 8 .................................................. 14 Installing the MOTOTRBO Driver ............................................................................... 15 On Microsoft Windows 7 Professional (32-bit/64-bit)/ Home Premium (32-bit/64-bit) Operating System .................................................... 15 On Microsoft Windows Vista Business (32-bit/64-bit)/ Home Premium (32-bit/64-bit) Operating System .................................................... 15 On Microsoft Windows XP Professional (32-bit/64-bit)/ Home (32-bit/64-bit) Operating System.................................................................... 16 Setting Up the MOTOTRBO Local Area Connection On Your Computer ............... 18 Installing the FlashZap Driver..................................................................................... 20 On Microsoft Windows 7 Professional (32-bit/64-bit)/ Home Premium (32-bit/64-bit) Operating System .................................................... 20 On Microsoft Windows Vista Business (32-bit/64-bit)/ Home Premium (32-bit/64-bit) Operating System .................................................... 20 On Microsoft Windows XP Professional (32-bit/64-bit)/ Home (32-bit/64-bit) Operating System.................................................................... 21 Retrieving the Firmware and Codeplug Update Package ........................................ 23
English
NOTES
English
Introduction
Please read the instructions below before proceeding with the installation package for any of the MOTOTRBO CPS, Tuner and AirTracer Applications available on the CD kits GMVN5141_. Be sure to carefully read all on-screen instructions during the installation. The GMVN5141_ CPS, Tuner and AirTracer software CD is available for purchase and the software applications and the relevant upgrades are free to download from Motorola Online. The RDAC software CD GMVN5520_ is only available to purchase from Motorola Online. Motorola Online is available at: https://emeaonline.motorola.com/Login.aspx (EMEA region) https://asiaonline.motorola.com/ (ANZ region)
English
Minimum Hardware Requirements: Processor: 1 GHz Pentium grade processor. Memory: 1 GB RAM free memory, excluding onboard graphics card memory usage. DirectX 9-class graphics. 250 MB minimum free hard disk space. USB Port for radio communication DVD-ROM for software installation Note: If the PC does not meet the recommended configuration the CPS performance may be degraded.
Programming Cables
Motorola Part Number PMKN4012B* PMKN4013C* Cable Name Portable Programming Cable Portable Programming, Testing and Alignment Cable Mobile Front Programming Cable Mobile and Repeater Rear Programming Cable Mobile and Repeater Rear Programming, Testing and Alignment Cable Description This cable connects the radio to a USB port for radio programming and data applications. This cable connects the radio to a USB port for radio programming, data applications, testing and alignment. This cable connects the radio's front connector to a USB port for radio programming and data applications. This cable connects the radio's rear connector to a USB port for radio programming and data applications. This cable connects the radios rear connector to a USB port for radio programming, data applications, testing and alignment.
HKN6184_
PMKN4010_
PMKN4016_
* Earlier versions of programming cables will not work with the DP4000 radios.
Access Rights
You need to have Administrator rights on the target computer in order to proceed with any of the installations.
English
Installation Procedures
7. If so, select a language and then click on the Next button to proceed to the feature selection screen. 8. To install only the CPS, please check the box that says MOTOTRBO Customer Programming Software.
English
Installation Procedures
Note: If installing any of the Radio Management components, please see Radio Management Installation Instructions on page 5.
9. Follow the instructions on the screen to complete the installation. Note: It is required to reboot the machine if asked during the install process.
10. If security related Vista or Windows 7 messages come up during the install, Click 'OK' to proceed.
English
Installation Procedures
English
Installation Procedures
9. If so, select a language and then click on the Next button to proceed to the feature selection screen.
10. Select the MOTOTRBO Customer Programming Software, Radio Management Server, and Radio Management Device Programmer check boxes.
11. Follow the instructions on the screen to complete the installation. Note: Please reboot the machine if asked to do so during the install process.
English
Installation Procedures
2. Install Radio Management as specified in the Radio Management Installation Instructions section on page 5. 3. Revert the permissions back to the secure settings that were there before Step 1.
English
Installation Procedures
English
Installation Procedures
English
10
Installation Procedures
English
Installation Procedures
11
To resolve this problem, exit the installation and follow the steps below. On Microsoft Windows Operating Systems 1. Ensure your computer system adheres to the minimum system requirements. See System Installation Requirements on page 1. 2. If your system is not running Service Pack 2 or Service Pack 3, download and install Service Pack 3 from Microsoft. 3. Run the CPS/RDAC/Tuner/AirTracer Installation again. Windows Update Issues If Windows Update is not enabled on your Windows Vista or later computer, the Radio Management Server installation may not be able to install the Windows Identity Foundation, which may cause the installation to fail. To resolve the problem, exit the installation and follow the steps below. On Microsoft Windows Vista and Later Operating Systems 1. Go to Control Panel => System and Security => Windows Update and choose one of the options other than Never check for updates. 2. Go to the Microsoft page at http://support.microsoft.com/kb/958043 and follow the steps to fully re-enable Windows Update. 3. Run the installation again.
English
12
Installation Procedures
MOTOTRBO CPS Radio Management (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
DVD Motorola RM Job Processor Installer MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
English
Installation Procedures
13
DVD Full Installer Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
English
14
Installation Procedures
If your computer does not have access to the Internet: 1. Insert the Windows DVD into your computers DVD drive. 2. Go to the Start screen. 3. Right-click on the screen and choose All apps. 4. Scroll to the right until you see Windows System => Command Prompt. 5. Right-click on Command Prompt and choose Run as Administrator. 6. Enter DISM /Online /Enable-Feature /FeatureName:NetFx3 /All / LimitAccess /Source:<DVD_Drive>:\sources\sxs, where <DVD_Drive> is replaced with the drive that contains the Windows DVD, then press Enter. 7. After the operation completes, close Command Prompt.
For more information, please see the Microsoft page in the following link: http://msdn.microsoft.com/en-us/library/hh506443.aspx.
English
15
On Microsoft Windows Vista Business (32-bit/64-bit)/ Home Premium (32-bit/64-bit) Operating System
To install the MOTOTRBO driver: 1. Exit all the MOTOTRBO programs running on your computer. 2. Connect the programming cable to the radio, then connect the programming cable to the USB port on your computer. Turn on the radio.
English
16
3. The Driver Software Installation window appears automatically. The installation is complete. Click Close.
English
17
5. Select Install the software automatically (Recommended), as shown below. Click Next.
6. Please wait while your computer searches, and installs the driver. 7. The following screen appears if your computer cannot find the driver. Click Browse to manually locate the driver. The default path for the driver is C:\Program Files\Common Files\Motorola\MOTOTRBO Driver. Once you have located the driver, click OK.
8. Please wait while your computer installs the driver. 9. Once the installation is complete, click Finish. 10. Proceed to Setting Up the MOTOTRBO Local Area Connection On Your Computer on page 18 to complete the driver installation.
English
18
4. Click on Properties.
English
19
5. Uncheck all the checkboxes EXCEPT for Internet Protocol (TCP/IP). Select Show icon in notification area when connected and Notify me when this connection has limited or no connectivity. Note: The Notify me when this connection has limited or no connectivity option may not be available on all machines.
6. Click OK. You have now completed the setup for the MOTOTRBO Local Area Connection.
English
20
On Microsoft Windows Vista Business (32-bit/64-bit)/ Home Premium (32-bit/64-bit) Operating System
To install the FlashZap driver: 1. Exit all the MOTOTRBO programs running on your computer. 2. Connect the programming cable to the radio, then connect the programming cable to the USB port on your computer. Turn on the radio.
English
21
3. The Driver Software Installation window appears automatically. The installation is complete. Click Close.
English
22
8. Select Install the software automatically (Recommended), as shown below. Click Next.
9. Please wait while your computer searches, and installs the driver. 10. The following screen appears when your computer cannot find the driver. Click Browse to manually locate the driver. The default path for the driver is C:\Program Files\Common Files\Motorola\MOTOTRBO Driver. Once you have located the driver, click OK.
11. Please wait while your computer installs the driver. 12. Once the installation is complete, click Finish. You have now successfully installed the driver on Windows XP Home/Professional operating system. After the FlashZap driver installation, restart the device update or recover feature.
English
23
English
Haftungsausschluss
Die in diesem Dokument enthaltenen Informationen wurden sorgfltig geprft und gelten als gnzlich zuverlssig. Fr Ungenauigkeiten wird jedoch keine Haftung bernommen. Darber hinaus behlt sich Motorola das Recht zur Durchfhrung von nderungen an allen in diesem Handbuch aufgefhrten Produkten zur Verbesserung der Lesbarkeit, Funktion oder des Designs vor. Motorola haftet weder fr Ersatzansprche, die aus der Benutzung einer der in diesem Handbuch beschriebenen Anwendungen, Produkte oder Schaltungen entstehen, noch fr Ansprche, die auf patentrechtlich geschtzte Lizenzen oder die Rechte Dritter zurckzufhren sind.
Marken
MOTOROLA und das Logo mit dem stilisierten M sind beim USA Patent & Trademark Office registriert. Weitere hier aufgefhrte Produkt- und Dienstleistungsnamen sind Eigentum der jeweiligen Inhaber. 2007 2013 by Motorola Solutions, Inc.
HINWEISE
Inhaltsverzeichnis
Einleitung........................................................................................................................ 1 Systemanforderungen fr die Installation................................................................... 1 Programmierkabel ...................................................................................................... 3 Zugriffsrechte.............................................................................................................. 3 Kundenseitige Programmierungssoftware (CPS) Installationsanweisungen....... 5 Radio Management-Installationsanweisungen ........................................................... 7 Zustzliche Installationsanweisungen fr abgesicherte Betriebssysteme.............. 9 Tuner Installationsanweisungen ................................................................................ 10 AirTracer Installationsanweisungen .......................................................................... 11 Repeater Diagnostics and Control (RDAC) Anleitung.............................................. 12 Fehlerbehebung bei der Installation .......................................................................... 13 Anweisungen fr eine automatische Installation ..................................................... 14 Zustzliche Installationsanweisungen fr Windows 8 ............................................. 16 Installieren des MOTOTRBO-Treibers ....................................................................... 17 Auf Microsoft Windows 7 Professional (32-Bit/64-Bit)/Home Premium (32-Bit/64Bit) Betriebssystem ........................................................................................................ 17 Auf Microsoft Windows Vista Business (32-Bit/64-Bit)/Home Premium (32-Bit/64Bit) Betriebssystem ........................................................................................................ 17 Auf Microsoft Windows XP Professional (32-Bit/64-Bit)/Home (32-Bit/64-Bit) Betriebssystem................................................................................................................... 18 Einrichten der MOTOTRBO LAN-Verbindung auf Ihrem Computer ........................ 20 Installieren des FlashZap-Treibers............................................................................. 22 Auf Microsoft Windows 7 Professional (32-Bit/64-Bit)/Home Premium (32-Bit/64Bit) Betriebssystem ........................................................................................................ 22 Auf Microsoft Windows Vista Business (32-Bit/64-Bit)/Home Premium (32-Bit/64Bit) Betriebssystem ........................................................................................................ 22 Auf Microsoft Windows XP Professional (32-Bit/64-Bit)/Home (32-Bit/64-Bit) Betriebssystem................................................................................................................... 23 Abrufen von Firmware und Codeplug Update-Paket................................................ 25
Deutsch
Einleitung
Lesen Sie die Anweisungen durch, bevor Sie mit dem Installationspaket fr die auf den CD-Kits GMVN5141_ befindlichen Anwendungen MOTOTRBO CPS, Tuner und AirTracer fortfahren. Lesen sie alle Bildschirm-Anweisungen whrend der Installation sorgfltig. Die GMVN5141_ CPS, Tuner und AirTracer Software-CD ist im Handel erhltlich und die Softwareanwendungen und die relevanten Updates stehen kostenlos bei Motorola Online zum Download zur Verfgung . Die RDAC-Software-CD GMVN5520_ ist nur ber Motorola Online erhltlich. Motorola Online finden Sie unter: Https://emeaonline.motorola.com/login.aspx (EMEA-Region) Https://asiaonline.motorola.com/ (ANZ Region)
Deutsch
USB-Anschluss fr Funkverbindungen DVD-ROM fr die Installation der Software. Hinweis: Diese Konfiguration ist bei der Arbeit mit greren Codeplugs erforderlich.
Hardware-Mindestanforderungen: Prozessor: 1 GHz Pentium-Prozessor oder vergleichbar. Speicher: 1 GB RAM, ohne Speicherplatzbelegung durch die Onboard-Grafikkarte. DirectX 9-Grafikkarte. Mindestens 250 MB freier Festplattenspeicher. USB-Anschluss fr Funkverbindungen DVD-ROM fr die Installation der Software. Hinweis: Wenn der PC nicht der empfohlenen Konfiguration entspricht, kann sich das negativ auf die CPS-Leistung auswirken.
Deutsch
Programmierkabel
MotorolaArtikelnummer PMKN4012B* Kabelname Tragbares Programmierkabel Tragbares Programmier-, Prfund Ausrichtungskabel Mobiltelefonie Programmierkabel Beschreibung Dieses Kabel verbindet das Funkgert mit einem USB-Anschluss zur Programmierung des Funkgerts und fr Datenanwendungen. Dieses Kabel verbindet das Funkgert mit einem USB-Anschluss zum Programmieren, Testen und Ausrichten. Dieses Kabel verbindet die vorderseitige Radio-Schnittstelle mit dem USB-Anschluss fr Radio-Programmierung und Datenapplikationen. Dieses Kabel verbindet den Radio-Anschluss auf der Rckseite mit einem USB-Anschluss fr Radio-Programmierung und Datenapplikationen. Diese Kabel verbindet den Radio-Anschluss auf der Rckseite mit einem USB-Anschluss fr Radio-Programmierung, Datenapplikationen und Ausrichtung.
PMKN4013C*
HKN6184_
PMKN4010_
Mobile und Repeater Hinteres Programmierkabel Mobile und Repeater Hinteres Programmier-, Prf- und Ausrichtungskabel
PMKN4016_
Zugriffsrechte
Sie bentigen Administratorrechte auf dem Zielcomputer, um mit allen vorgesehenen Installationen fortzufahren.
Deutsch
HINWEISE
Deutsch
Installationsverfahren
7. Wenn das der Fall ist, whlen Sie eine Sprache aus und klicken Sie auf Weiter, um zum Bildschirm der Funktionsauswahl zu gelangen. 8. So installieren Sie nur die CPS: Aktivieren Sie das Kontrollkstchen fr die MOTOTRBO-Software fr die kundenseitige Programmierung.
Deutsch
Installationsverfahren
Hinweis: Informationen zur Installation von Radio Management-Komponenten finden Sie unter Radio Management-Installationsanweisungen auf Seite 7.
9. Folgen Sie den Anweisungen auf dem Bildschirm, um die Installation fertig zu stellen. Hinweis: Sie mssen den Computer neu starten, falls Sie whrend der Installation dazu aufgefordert werden.
10. Wenn sicherheitsrelevante Vista- oder Windows 7-Meldungen whrend der Installation angezeigt werden, klicken Sie zum Fortfahren auf OK.
Deutsch
Installationsverfahren
Radio Management-Installationsanweisungen
Bitte befolgen Sie die nachfolgenden Anweisungen bei der Installation aller Radio Management-Anwendungen (MOTOTRBO-Software zur kundenseitigen Programmierung, Radio Management-Server und Radio Management Device Programmer). 1. Wenn Sie das Betriebssystem Windows 8 verwenden, lesen Sie bitte vor der Installation den Abschnitt "Zustzliche Installationsanweisungen fr Windows 8" durch. 2. Wenn Sie ein abgesichertes (hardened) Betriebssystem verwenden, lesen Sie sich vor der Installation den Abschnitt Zustzliche Installationsanweisungen fr abgesicherte Betriebssysteme auf Seite 9 durch. 3. Trennen Sie alle Gerte, die mit Ihrem Computer verbunden sind. 4. Beenden Sie alle Programme, die auf dem Computer ausgefhrt werden. 5. Stellen Sie sicher, dass Sie als Benutzer mit lokalen Administrationsrechten auf Ihrem Computer angemeldet sind. Bei Verwendung von Windows Vista oder hher knnen Sie alternativ UAC aktivieren. 6. Legen Sie die DVD in das DVD-ROM-Laufwerk ein. Wenn Sie ber mehr als ein DVD-Laufwerk verfgen, muss das Master-DVD-Laufwerk verwendet werden. 7. Warten Sie, bis die automatische Installation startet. Befolgen Sie dann die Anweisungen auf dem Bildschirm. Wenn die automatische Installation scheitert, navigieren Sie zu Setup.exe auf der DVD und doppelklicken Sie auf die Datei. 8. Im ersten Bildschirm wird mglicherweise eine Sprachauswahl angezeigt, bei der die Sprache fr die Installation gewhlt werden kann.
Deutsch
Installationsverfahren
9. Wenn das der Fall ist, whlen Sie eine Sprache aus und klicken Sie auf Weiter, um zum Bildschirm der Funktionsauswahl zu gelangen.
10. Aktivieren Sie die Kontrollkstchen MOTOTRBO-Software zur kundenseitigen Programmierung, Radio Management-Server und Radio Management Device Programmer.
11. Folgen Sie den Anweisungen auf dem Bildschirm, um die Installation fertig zu stellen.
Deutsch
Installationsverfahren
Hinweis: Fhren Sie einen Neustart des Rechners durch, falls Sie whrend der Installation dazu aufgefordert werden.
2. Installieren von Radio Management entsprechend den Angaben im Radio Management-Installationsanweisungen Abschnitt auf Seite 7. 3. Setzen Sie dann die Berechtigungen auf die sicheren Einstellungen zurck, so, wie sie vor Schritt 1 waren.
Deutsch
Installationsverfahren
10
Tuner Installationsanweisungen
1. Wenn Sie das Betriebssystem Windows 8 verwenden, lesen Sie bitte vor der Installation den Abschnitt "Zustzliche Installationsanweisungen fr Windows 8" durch. 2. Trennen Sie alle MOTOTRBO-Gerte, die mit Ihrem Computer verbunden sind. 3. Beenden Sie alle Programme, die auf dem Computer ausgefhrt werden. 4. Legen Sie die Installations-CD in das CD-Laufwerk ein. 5. Whlen Sie die AirTracer-Option im Installationsbildschirm aus. Hinweis: Wenn die Installationsanwendung nicht automatisch gestartet wird, suchen Sie die Datei Autorun.exe auf der CD-ROM, doppelklicken Sie auf die Datei, und gehen Sie zurck zu Schritt 4. 6. 7. 8. 9. Klicken Sie auf Weiter, wenn der Willkommen-Bildschirm angezeigt wird. Lesen Sie den Software-Lizenzvertrag vor dem Akzeptieren. Folgen Sie den Anweisungen auf dem Bildschirm, um die Installation fertig zu stellen. Wenn die Tuner-Installation abgeschlossen ist, fahren Sie mit der Installation des MOTOTRBO-Treibers fort (sieheInstallieren des MOTOTRBO-Treibers auf Seite 17) und richten Sie die MOTOTRBO-LAN-Verbindung (sieheEinrichten der MOTOTRBO LAN-Verbindung auf Ihrem Computer auf Seite 20) auf Ihrem Computer ein.
Deutsch
11
Installationsverfahren
AirTracer Installationsanweisungen
1. Wenn Sie das Betriebssystem Windows 8 verwenden, lesen Sie bitte vor der Installation den Abschnitt "Zustzliche Installationsanweisungen fr Windows 8" durch. 2. Trennen Sie alle MOTOTRBO-Gerte, die mit Ihrem Computer verbunden sind. 3. Beenden Sie alle Programme, die auf dem Computer ausgefhrt werden. 4. Legen Sie die Installations-CD in das CD-Laufwerk ein. 5. Whlen Sie die AirTracer-Option im Installationsbildschirm aus. Hinweis: Wenn die Installationsanwendung nicht automatisch gestartet wird, suchen Sie die Datei Autorun.exe auf der CD-ROM, doppelklicken Sie auf die Datei, und gehen Sie zurck zu Schritt 4. 6. 7. 8. 9. Klicken Sie auf Weiter, wenn der Willkommen-Bildschirm angezeigt wird. Lesen Sie den Software-Lizenzvertrag vor dem Akzeptieren. Folgen Sie den Anweisungen auf dem Bildschirm, um die Installation fertig zu stellen. Sobald die AirTracer-Installation abgeschlossen ist, fahren Sie mit der Installation des MOTOTRBO-Treibers fort (sieheInstallieren des MOTOTRBO-Treibers auf Seite 17) und richten Sie die MOTOTRBO-LAN-Verbindung (sieheEinrichten der MOTOTRBO LAN-Verbindung auf Ihrem Computer auf Seite 20) auf Ihrem Computer ein.
Deutsch
Installationsverfahren
12
Deutsch
13
Installationsverfahren
Um dieses Problem zu beheben, beenden Sie die Installation und fhren Sie die folgenden Schritte aus. Auf Microsoft Windows Betriebssysteme 1. Stellen Sie sicher, dass Ihr Computersystem die Mindestsystemanforderungen erfllt. Siehe Systemanforderungen fr die Installation auf Seite 1. 2. Wenn das System nicht mit Service Pack 2 oder Service Pack 3 luft, laden Sie Service Pack 3 von Microsoft herunter und installieren Sie es. 3. Fhren Sie die cps/RDAC/Tuner/AirTracer-Installation erneut aus. Probleme mit Windows Update Wenn Windows Update nicht auf Ihrem Computer mit Windows Vista oder einem spteren Betriebssystem aktiviert ist, kann es sein, dass die Installation des Funkverwaltungsservers nicht in der Lage ist, die Windows Identity Foundation zu installieren. Dies kann dazu fhren, dass die Installation fehlschlgt. Um dieses Problem zu beheben, beenden Sie die Installation und befolgen Sie die nachfolgenden Schritte. Auf Microsoft Windows Vista und spteren Betriebssystemen 1. Gehen Sie zu Systemsteuerung => System und Sicherheit => Windows Update und whlen Sie eine andere Option als Nie nach Updates suchen. 2. Gehen Sie auf die Microsoft-Seite unter http://support.microsoft.com/kb/958043 und befolgen Sie die Schritte, um Windows Update wieder vollstndig zu aktivieren. 3. Starten Sie die Installation erneut.
Deutsch
Installationsverfahren
14
MOTOTRBO CPS-Funkverwaltung (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Installer fr DVD Motorola RM Job Processor MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
Deutsch
15
Installationsverfahren
Vollstndiger Installer fr DVD Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Deutsch
Installationsverfahren
16
Wenn Ihr Computer nicht mit dem Internet verbunden ist: 1. Legen Sie die Windows-DVD in das DVD-Laufwerk Ihres Computers ein. 2. Gehen Sie auf die Startseite. 3. Klicken Sie mit der rechten Maustaste auf den Bildschirm und whlen Sie "Alle Anwendungen". 4. Scrollen Sie nach rechts, bis Sie Windows-System => Eingabeaufforderung sehen. 5. Klicken Sie mit der rechten Maustaste auf "Eingabeaufforderung" und whlen Sie "Als Administrator ausfhren". 6. Geben Sie "DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:<DVD_Drive>:\sources\sxs" ein. Ersetzen Sie <DVD_Drive> mit dem Laufwerk, in dem die Windows-DVD liegt, und drcken Sie die Eingabetaste. 7. Schlieen Sie die Eingabeaufforderung, wenn der Vorgang abgeschlossen ist.
Deutsch
17
Auf Microsoft Windows Vista Business (32-Bit/64-Bit)/ Home Premium (32-Bit/64-Bit) Betriebssystem
So installieren Sie die MOTOTRBO-Treiber: 1. Beenden Sie alle MOTOTRBO-Programme, die auf dem Computer ausgefhrt werden. 2. Schlieen Sie das Programmierkabel an das Radio an, schlieen Sie dann das Programmierkabel an den USB-Anschluss Ihres Computers an. Schalten Sie das Gert ein.
Deutsch
18
3. Das Fenster der Treibersoftwareinstallation wird automatisch angezeigt. Die Installation ist abgeschlossen. Klicken Sie auf Schlieen.
Deutsch
19
5. Whlen Sie Die Option Software automatisch installieren (Empfohlen) (siehe Abbildung unten). Klicken Sie auf Weiter.
6. Bitte warten Sie, whrend Ihr Computer den Treiber sucht und installiert. 7. Der folgende Bildschirm wird angezeigt, wenn Ihr Computer den Treiber nicht findet. Klicken Sie auf Durchsuchen, um manuell nach dem Treiber zu suchen. Der Standardpfad fr den Treiber lautet C:\Programme\Gemeinsame Dateien\ Motorola\MOTOTRBO Treiber. Haben Sie den Treiber gefunden, klicken Sie auf OK.
8. Bitte warten Sie, whrend Ihr Computer den Treiber installiert. 9. Nach Abschluss der Installation klicken Sie auf Fertig stellen. 10. Fahren Sie mit Einrichten der MOTOTRBO LAN-Verbindung auf Ihrem Computer auf Seite 20 fort, um die Treiberinstallation abzuschlieen.
Deutsch
20
Deutsch
21
5. Deaktivieren Sie alle Kontrollkstchen bis auf Internet Protocol (TCP/IP). Whlen Sie Symbol im Infobereich anzeigen und Benachrichtigen, wenn diese Verbindung eingeschrnkte oder keine Konnektivitt besitzt. Hinweis: Die Option Benachrichtigen, wenn diese Verbindung eingeschrnkte oder keine Konnektivitt besitzt ist mglicherweise nicht auf allen Maschinen verfgbar.
6. Klicken Sie auf OK. Sie sind nun am Ende des Setup fr die MOTOTRBO LAN-Verbindung.
Deutsch
22
Auf Microsoft Windows Vista Business (32-Bit/64-Bit)/ Home Premium (32-Bit/64-Bit) Betriebssystem
So installieren Sie den FlashZap-Treiber: 1. Beenden Sie alle MOTOTRBO-Programme, die auf dem Computer ausgefhrt werden. 2. Schlieen Sie das Programmierkabel an das Radio an, schlieen Sie dann das Programmierkabel an den USB-Anschluss Ihres Computers an. Schalten Sie das Gert ein.
Deutsch
23
3. Das Fenster Treibersoftwareinstallation wird automatisch angezeigt. Die Installation ist abgeschlossen. Klicken Sie auf Schlieen.
Deutsch
24
8. Whlen Sie Die Option Software automatisch installieren (Empfohlen) (siehe Abbildung unten). Klicken Sie auf Weiter.
9. Bitte warten Sie, whrend Ihr Computer den Treiber sucht und installiert. 10. Der folgende Bildschirm wird angezeigt, wenn Ihr Computer den Treiber nicht findet. Klicken Sie auf Durchsuchen, um manuell nach dem Treiber zu suchen. Der Standardpfad fr den Treiber lautet C:\Programme\Gemeinsame Dateien\ Motorola\MOTOTRBO Treiber. Haben Sie den Treiber gefunden, klicken Sie auf OK.
11. Bitte warten Sie, whrend Ihr Computer den Treiber installiert. 12. Nach Abschluss der Installation klicken Sie auf Fertig stellen. Sie haben nun erfolgreich den Treiber auf Windows XP Home/Professional installiert. Starten Sie nach der FlashZap-Treiberinstallation die Funktion Gerte-Update oder Wiederherstellen.
Deutsch
25
Deutsch
Limitation de responsabilit
Les informations contenues dans le prsent document sont tudies attentivement et sont considres comme totalement fiables. Aucune responsabilit ne peut toutefois tre accepte pour d'ventuelles inexactitudes. En outre, Motorola se rserve le droit de modifier tout produit concern par le prsent document, afin damliorer la lisibilit, le fonctionnement ou la conception. Motorola naccepte aucune responsabilit rsultant des applications ou de lutilisation dun produit ou circuit dcrit dans le prsent document et ninclut aucune licence dans ses droits de brevet ni les droits dautre nature.
Marques
MOTOROLA et le logo M stylis sont des marques dposes au United States Patent and Trademark Office (Bureau amricain des brevets et des marques de commerce). Tous les autres noms de produits ou services sont la proprit de leurs dtenteurs respectifs. 2007 - 2013 par Motorola Solutions, Inc.
REMARQUES
Franais
REMARQUES
Franais
Introduction
Lisez les instructions ci-dessous avant de procder l'installation d'une des applications MOTOTRBO (CPS, Tuner et AirTracer) disponibles sur les CD GMVN5141_. Assurezvous de lire attentivement les instructions qui s'affichent l'cran lors de l'installation. Le CD des logiciels CPS, Tuner et AirTracer GMVN5141_ est disponible l'achat. Les applications logicielles et les mises niveau sont tlchargeables gratuitement depuis Motorola Online. Le CD du logiciel RDAC GMVN5520_ est disponible l'achat uniquement depuis Motorola Online. Motorola Online est accessible depuis : https://emeaonline.motorola.com/Login.aspx (zone EMEA) https://asiaonline.motorola.com/ (zone Australie et Nouvelle-Zlande)
Franais
DVD-ROM pour l'installation du logiciel. Remarque : Cette configuration est obligatoire pour l'utilisation de codeplugs importants.
Configuration matrielle recommande : Processeur : processeur de type Pentium 1 GHz. Mmoire : 1 Go de mmoire RAM libre, l'exception de l'utilisation de mmoire par la carte graphique intgre. Carte graphique de type DirectX 9. 250 Go minimum d'espace libre sur le disque dur. Port USB pour communication radio. DVD-ROM pour l'installation du logiciel. Remarque : Si le PC ne respecte pas la configuration recommande, les performances du CPS risquent d'tre dgrades.
Franais
Cbles de programmation
Rfrence Motorola PMKN4012B* Nom de cble Cble programmable portatif Cble de programmation, de test et dalignement pour radio portative Cble de programmation avant du mobile Cble de programmation arrire pour radio mobile et rpteur Cble d'alimentation, de test et de programmation arrire pour radio mobile et rpteur Description Ce cble raccorde la radio un port USB pour la programmation de la radio et les applications de donnes. Ce cble raccorde la radio un port USB pour la programmation, le test et l'alignement de la radio ainsi que pour les applications de donnes. Ce cble raccorde le connecteur avant de la radio un port USB pour la programmation de la radio et les applications de donnes. Ce cble raccorde le connecteur arrire d'une radio un port USB pour la programmation de la radio et les applications de donnes. Ce cble raccorde le connecteur arrire d'une radio un port USB pour la programmation, l'alignement et le test de la radio ainsi que pour les applications de donnes.
PMKN4013C*
HKN6184_
PMKN4010_
PMKN4016_
* Les versions prcdentes du cble de programmation ne sont pas compatibles avec les radios DP4000.
Droits d'accs
Vous devez disposer des droits d'administrateur sur l'ordinateur cible pour pouvoir continuer l'installation.
Franais
REMARQUES
Franais
Procdures d'installation
7. Si elle s'affiche, slectionnez une langue, puis cliquez sur le bouton Suivant pour passer l'cran de slection de fonctions. 8. Pour installer uniquement CPS, cochez la case MOTOTRBO Customer Programming Software. Remarque : Si vous souhaitez installer l'un des composants Radio Management, reportez-vous la section Instructions d'installation de Radio Management la page 7.
Franais
Procdures d'installation
9. Suivez les instructions lcran pour terminer l'installation. Remarque : Redmarrez l'ordinateur si vous y tes invit au cours du processus d'installation.
10. Si des messages lis la scurit de Vista ou de Windows 7 s'affichent lors de l'installation, cliquez sur OK pour continuer.
Franais
Procdures d'installation
Franais
Procdures d'installation
9. Si elle s'affiche, slectionnez une langue, puis cliquez sur le bouton Suivant pour passer l'cran de slection de fonctions.
10. Cochez les cases MOTOTRBO Customer Programming Software, Radio Management Server et Radio Management Device Programmer.
11. Suivez les instructions lcran pour terminer l'installation. Remarque : Redmarrez l'ordinateur si vous y tes invit au cours du processus d'installation.
Franais
Procdures d'installation
2. Installez Radio Management comme indiqu dans la section Instructions d'installation de Radio Management la page 7. 3. Rtablissez les droits d'accs aux paramtres scuriss dfinis avant l'tape 1.
Franais
10
Procdures d'installation
Franais
Procdures d'installation
11
Franais
12
Procdures d'installation
Franais
Procdures d'installation
13
Pour rsoudre ce problme, quittez l'installation et suivez les tapes ci-dessous. Sous les systmes d'exploitation Microsoft Windows 1. Assurez-vous que votre ordinateur a la configuration minimale requise. Voir Configuration requise pour l'installation du systme la page 1. 2. Si votre systme ne comporte pas le Service Pack 2 ou le Service Pack 3, tlchargez et installez le Service Pack 3 depuis le site Web de Microsoft. 3. Excutez l'installation de CPS/RDAC/Tuner/AirTracer.
Questions sur Windows Update Si Windows Update n'est pas activ sur votre systme d'exploitation Windows Vista ou sur une version ultrieure, l'installation du serveur de gestion de la radio peut ne pas tre en mesure d'installer Windows Identity Foundation, ce qui peut provoquer l'chec de l'installation. Pour rsoudre le problme, quittez l'installation et suivez les tapes ci-dessous.
Franais
14
Procdures d'installation
Sous Microsoft Windows Vista et les systmes d'exploitation ultrieurs 1. Accdez Panneau de configuration => Systme et scurit => Windows Update, puis slectionnez l'une des options, l'exception de l'option Ne jamais rechercher les mises jour 2. Accdez la page Microsoft http://support.microsoft.com/kb/958043 et suivez les tapes pour ractiver compltement Windows Update. 3. Lancez nouveau l'installation.
Franais
Procdures d'installation
15
MOTOTRBO CPS Radio Management (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
DVD Motorola RM Job Processor Installer MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
Franais
16
Procdures d'installation
DVD Full Installer Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Franais
Procdures d'installation
17
Si votre ordinateur ne dispose pas d'une connexion Internet: 1. Insrez le DVD Windows dans le lecteur de DVD de votre ordinateur. 2. Accdez l'cran Dmarrer. 3. Cliquez avec le bouton droit de la souris sur l'cran et slectionnez Toutes les applications . 4. Faites dfiler vers la droite jusqu' ce que vous voyiez Systme Windows => Invite de commandes. 5. Cliquez avec le bouton droit de la souris sur Invite de commandes et slectionnez Excuter en tant qu'administrateur . 6. Saisissez DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:<Lecteur_DVD>:\sources\sxs , o <Lecteur_DVD> est remplac par le nom du lecteur qui contient le DVD Windows. Appuyez ensuite sur Entre. 7. la fin de l'opration, fermez l'invite de commandes. Pour plus d'informations, consultez la page Microsoft l'adresse http://msdn.microsoft.com/en-us/library/hh506443.aspx.
Franais
18
Procdures d'installation
REMARQUES
Franais
19
Sous le systme d'exploitation Microsoft Windows 7 Professionnel (32 bits/64 bits)/dition Familiale Premium (32 bits/64 bits)
Pour installer le pilote MOTOTRBO : 1. Fermez tous les programmes MOTOTRBO en cours d'excution sur votre ordinateur. 2. Connectez le cble de programmation sur la radio, puis connectez le cble de programmation au port USB de votre ordinateur. Allumez la radio. 3. La fentre Installation du pilote logiciel s'affiche automatiquement. L'installation est termine. Cliquez sur Fermer.
Sous le systme d'exploitation Microsoft Windows Vista Professionnel (32 bits/64 bits)/dition Familiale Premium (32 bits/ 64 bits)
Pour installer le pilote MOTOTRBO : 1. Fermez tous les programmes MOTOTRBO en cours d'excution sur votre ordinateur. 2. Connectez le cble de programmation sur la radio, puis connectez le cble de programmation au port USB de votre ordinateur. Allumez la radio.
Franais
20
3. La fentre Installation du pilote logiciel s'affiche automatiquement. L'installation est termine. Cliquez sur Fermer.
Sous le systme d'exploitation Microsoft Windows XP Professionnel (32 bits/64 bits)/dition familiale (32 bits/64 bits)
Pour installer le pilote MOTOTRBO : 1. Fermez tous les programmes MOTOTRBO en cours d'excution sur votre ordinateur. 2. Connectez le cble de programmation sur la radio, puis connectez le cble de programmation au port USB de votre ordinateur. Allumez la radio. 3. La fentre de l'Assistant Matriel dtect s'affiche automatiquement. 4. Slectionnez Non, pas pour cette fois comme indiqu ci-dessous. Cliquez sur Suivant.
Franais
21
5. Slectionnez Installer le logiciel automatiquement (recommand) comme indiqu ci-dessous. Cliquez sur Suivant.
6. Patientez quelques instants pendant que votre ordinateur recherche et installe le pilote. 7. L'cran suivant s'affiche si votre ordinateur ne peut pas trouver le pilote. Cliquez sur Parcourir pour rechercher le pilote manuellement. Le chemin par dfaut pour le pilote est C:\Program Files\Common Files\Motorola\Pilote MOTOTRBO. Une fois que vous avez trouv le pilote, cliquez sur OK.
8. Patientez quelques instants pendant que votre ordinateur installe le pilote. 9. Une fois l'installation termine, cliquez sur Terminer. 10. Passez Configuration de la connexion au rseau local MOTOTRBO sur votre ordinateur la page 22 pour terminer l'installation du pilote.
Franais
22
Franais
23
5. Dsactivez toutes les cases cocher sauf pour Protocole Internet (TCP/IP) . Slectionnez les options Afficher une icne dans la zone de notification une fois la connexion tablie et M'indiquer si cette connexion a une connectivit limite ou inexistante . Remarque : L'option M'indiquer si cette connexion a une connectivit limite ou inexistante peut ne pas tre disponible sur tous les ordinateurs.
6. Cliquez sur OK. Vous avez maintenant termin la configuration de la connexion au rseau local MOTOTRBO.
Franais
24
Sous le systme d'exploitation Microsoft Windows 7 Professionnel (32 bits/64 bits)/dition Familiale Premium (32 bits/64 bits)
Pour installer le pilote FlashZap : 1. Fermez tous les programmes MOTOTRBO en cours d'excution sur votre ordinateur. 2. Connectez le cble de programmation sur la radio, puis connectez le cble de programmation au port USB de votre ordinateur. Allumez la radio. 3. La fentre Installation du pilote logiciel s'affiche automatiquement. L'installation est termine. Cliquez sur Fermer.
Sous le systme d'exploitation Microsoft Windows Vista Professionnel (32 bits/64 bits)/dition Familiale Premium (32 bits/64 bits)
Pour installer le pilote FlashZap : 1. Fermez tous les programmes MOTOTRBO en cours d'excution sur votre ordinateur. 2. Connectez le cble de programmation sur la radio, puis connectez le cble de programmation au port USB de votre ordinateur. Allumez la radio.
Franais
25
3. La fentre Installation du pilote logiciel s'affiche automatiquement. L'installation est termine. Cliquez sur Fermer.
Sous le systme d'exploitation Microsoft Windows XP Professionnel (32 bits/64 bits)/dition familiale (32 bits/64 bits)
Pour installer le pilote FlashZap : 1. Fermez tous les programmes MOTOTRBO en cours d'excution sur votre ordinateur. 2. Connectez le cble de programmation sur la radio, puis connectez le cble de programmation au port USB de votre ordinateur. Allumez la radio. 3. Lancez CPS sur votre ordinateur. 4. Dans le menu CPS, slectionnez Appareil => Mise jour/Rcupration. 5. La bote de dialogue Mise jour/Rcupration de l'appareil s'affiche. Choisissez la mise jour du micrologiciel et du codeplug voulue et cliquez sur OK. 6. La fentre de l'Assistant Matriel dtect s'affiche automatiquement. 7. CPS affiche un message d'erreur si le pilote FlashZap n'est pas install. Cliquez sur OK.
Franais
26
8. Slectionnez Installer le logiciel automatiquement (recommand) comme indiqu ci-dessous. Cliquez sur Suivant.
9. Patientez quelques instants pendant que votre ordinateur recherche et installe le pilote. 10. L'cran suivant s'affiche si votre ordinateur ne peut pas trouver le pilote. Cliquez sur Parcourir pour rechercher le pilote manuellement. Le chemin par dfaut pour le pilote est C:\Program Files\Common Files\Motorola\Pilote MOTOTRBO. Une fois que vous avez trouv le pilote, cliquez sur OK.
11. Patientez quelques instants pendant que votre ordinateur installe le pilote. 12. Une fois l'installation termine, cliquez sur Terminer. Vous avez russi l'installation du pilote sur le systme d'exploitation Windows XP dition familiale/Professionnel. Une fois l'installation du pilote FlashZap termine, redmarrez la fonction de mise jour ou de rcupration de l'appareil.
Franais
27
Franais
Descargo de responsabilidad
La informacin de este documento se ha analizado exhaustivamente y se considera totalmente fiable. No obstante, no se asume ninguna responsabilidad por las posibles imprecisiones. De hecho, Motorola se reserva el derecho de realizar cambios en cualquier producto aqu descrito para mejorar su legibilidad, funcin o diseo. Motorola no asumir ninguna responsabilidad derivada de las aplicaciones o del uso de cualquier producto o circuito descritos en el presente documento, ni cubrir ninguna licencia en virtud de sus derechos de patente ni de los derechos de terceros.
Marcas comerciales
MOTOROLA y el logotipo de la M estilizada estn registrados en la oficina de patentes y marcas de Estados Unidos. El resto de nombres de servicios o productos son propiedad de sus respectivos titulares. 2007 - 2013 Motorola Solutions, Inc.
NOTAS
Contenido
Introduccin ................................................................................................................... 1 Requisitos de instalacin del sistema ......................................................................... 1 Cables de programacin ............................................................................................ 3 Derechos de acceso................................................................................................... 3 Instrucciones de instalacin de Customer Programming Software (CPS) .............. 5 Instrucciones de instalacin de Radio Management ................................................. 7 Instrucciones de instalacin adicionales para sistemas operativos reforzados .... 9 Instrucciones de instalacin del sintonizador .......................................................... 10 Instrucciones de instalacin de AirTracer ................................................................ 11 Instrucciones de instalacin del software de diagnstico y control de repetidor (RDAC) .......................................................................................................................... 12 Solucin de problemas de instalacin ...................................................................... 13 Instrucciones de instalacin silenciosa .................................................................... 15 Instrucciones de instalacin adicionales para Windows 8...................................... 17 Instalacin del controlador MOTOTRBO ................................................................... 19 En el sistema operativo Microsoft Windows 7 Professional (32 bits/64 bits)/Home Premium (32 bits/64 bits).......................................................................................... 19 En el sistema operativo Microsoft Windows Vista Business (32 bits/64 bits)/Home Premium (32 bits/64 bits).......................................................................................... 19 En el sistema operativo Microsoft Windows XP Professional (32 bits/64 bits)/Home (32 bits/64 bits) ......................................................................................................... 20 Configuracin de la conexin de rea local MOTOTRBO en el equipo.................. 22 Instalacin del controlador FlashZap ........................................................................ 24 En el sistema operativo Microsoft Windows 7 Professional (32 bits/64 bits)/Home Premium (32 bits/64 bits).......................................................................................... 24 En el sistema operativo Microsoft Windows Vista Business (32 bits/64 bits)/Home Premium (32 bits/64 bits).......................................................................................... 24 En el sistema operativo Microsoft Windows XP Professional (32 bits/64 bits)/Home (32 bits/64 bits) ......................................................................................................... 25 Recuperacin del paquete de actualizacin del firmware y conector de cdigo .. 27
Espaol
NOTAS
Espaol
Introduccin
Lea las instrucciones que se indican a continuacin antes de continuar con el paquete de instalacin de cualquiera de las aplicaciones MOTOTRBO CPS, Sintonizador y AirTracer disponibles en los kits de CD GMVN5141_. Asegrese de leer atentamente todas las instrucciones que aparezcan en pantalla durante la instalacin. El CD de software GMVN5141_CPS, Sintonizador y AirTracer est disponible para su compra y las aplicaciones de software y las actualizaciones correspondientes se pueden descargar gratuitamente de Motorola Online. El CD de software RDAC GMVN5520_ slo se puede adquirir de Motorola Online. Motorola Online est disponible en: https://emeaonline.motorola.com/Login.aspx (Europa, Oriente Medio y frica) Https://asiaonline.motorola.com/ (Australia y Nueva Zelanda)
Espaol
DVD-ROM para la instalacin del software. Nota: Esta configuracin es necesaria al trabajar con conectores de cdigo grandes.
Requisitos mnimos del hardware: Procesador: Pentium de 1 GHz. Memoria: 1 GB de RAM disponible, sin incluir la memoria que utiliza la tarjeta grfica integrada. Grficos DirectX 9. Espacio disponible en el disco duro de 250 MB como mnimo. Puerto USB para comunicacin de radio. DVD-ROM para la instalacin del software. Nota: Si el PC no cumple con la configuracin recomendada, el rendimiento de CPS podra disminuir.
Espaol
Cables de programacin
Nmero de pieza de Motorola PMKN4012B* Nombre del cable Cable de programacin porttil Cable de programacin, prueba y alineacin porttil Cable de programacin delantero mvil Cable de programacin posterior de repetidor y mvil Cable de programacin, prueba y alineacin posterior de repetidor y mvil Descripcin Conecta la radio a un puerto USB para la programacin de la radio y las aplicaciones de datos. Conecta la radio a un puerto USB para la programacin de la radio, las aplicaciones de datos, la realizacin de pruebas y la alineacin. Conecta el conector frontal de la radio a un puerto USB para la programacin de la radio y las aplicaciones de datos. Conecta el conector posterior de la radio a un puerto USB para la programacin de la radio y las aplicaciones de datos. Conecta el conector posterior de la radio a un puerto USB para la programacin de la radio, las aplicaciones de datos, la realizacin de pruebas y la alineacin.
PMKN4013C*
HKN6184_
PMKN4010_
PMKN4016_
* Las versiones anteriores de cables de programacin no funcionan con las radios DP4000.
Derechos de acceso
Debe tener derechos de administrador en el equipo de destino para llevar a cabo cualquiera de las instalaciones.
Espaol
NOTAS
Espaol
Procedimientos de instalacin
7. Si es as, seleccione un idioma y, a continuacin, haga clic en el botn Siguiente para pasar a la pantalla de seleccin de funciones. 8. Para instalar slo CPS, marque la casilla correspondiente a MOTOTRBO Customer Programming Software.
Espaol
Procedimientos de instalacin
Nota: Si instala alguno de los componentes de Radio Management, consulte Instrucciones de instalacin de Radio Management en la pgina 7.
9. Siga las instrucciones que aparecen en pantalla para completar la instalacin. Nota: Reinicie el equipo si as se le solicita durante el proceso de instalacin.
10. Si aparecen mensajes de Vista o Windows 7 relacionados con la seguridad, haga clic en Aceptar para continuar.
Espaol
Procedimientos de instalacin
Espaol
Procedimientos de instalacin
9. Si es as, seleccione un idioma y, a continuacin, haga clic en el botn Siguiente para pasar a la pantalla de seleccin de funciones.
10. Seleccione las casillas de MOTOTRBO Customer Programming Software, Radio Management Server y Radio Management Device Programmer.
11. Siga las instrucciones que aparecen en pantalla para completar la instalacin. Nota: Si as se le solicita, reinicie el equipo durante el proceso de instalacin.
Espaol
Procedimientos de instalacin
2. Instale Radio Management segn se indica en la seccin Instrucciones de instalacin de Radio Management de la pgina 7. 3. Vuelva a establecer los permisos en la configuracin segura en la que estaban antes del paso 1.
Espaol
10
Procedimientos de instalacin
Espaol
Procedimientos de instalacin
11
Espaol
12
Procedimientos de instalacin
Espaol
Procedimientos de instalacin
13
Para solucionar este problema, salga de la instalacin y siga estos pasos. En sistemas operativos Microsoft Windows 1. Asegrese de que el sistema se ajusta a los requisitos mnimos. Consulte Requisitos de instalacin del sistema en la pgina 1. 2. Si el sistema no dispone de Service Pack 2 o Service Pack 3, descargue e instale Service Pack 3 de Microsoft. 3. Ejecute de nuevo la instalacin de PC/RDAC/Sintonizador/AirTracer.
Problemas de Windows Si Windows Update no est habilitado en el equipo con Windows Vista o posterior, es posible que la instalacin de Radio Management Server no pueda instalar Windows Identity Foundation, lo que puede ocasionar errores en la instalacin. Para resolver el problema, salga de la instalacin y siga los pasos que se describen a continuacin.
Espaol
14
Procedimientos de instalacin
En sistemas operativos Microsoft Windows Vista y posteriores 1. Vaya a Panel de control => Sistema y seguridad => Windows Update y seleccione una de las opciones que no sea para no buscar nunca actualizaciones. 2. Vaya a la pgina de Microsoft en http://support.microsoft.com/kb/958043 y siga los pasos para volver a habilitar Windows Update. 3. Ejecute de nuevo la instalacin.
Espaol
Procedimientos de instalacin
15
Radio Management de CPS de MOTOTRBO (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Instalador de RM Job Processor para DVD de Motorola MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
Espaol
16
Procedimientos de instalacin
Instalador completo de DVD Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Espaol
Procedimientos de instalacin
17
Si el ordenador no tiene conexin a Internet: 1. Introduzca el DVD de Windows en la unidad de DVD del ordenador. 2. Vaya a la pantalla de inicio. 3. Haga clic con el botn derecho del ratn y seleccione "Todas las aplicaciones". 4. Desplcese hacia la derecha hasta que aparezca Sistema Windows => Lnea de comandos. 5. Haga clic con el botn derecho del ratn en Lnea de comandos y seleccione "Ejecutar como administrador". 6. Introduzca DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:<DVD_Drive>:\sources\sxs, donde debe sustituir <DVD_Drive> por la unidad en la que est el DVD de Windows. A continuacin, pulse Intro. 7. Cuando la operacin termine, cierre Lnea de comandos.
Espaol
18
Procedimientos de instalacin
NOTAS
Espaol
19
En el sistema operativo Microsoft Windows 7 Professional (32 bits/ 64 bits)/Home Premium (32 bits/64 bits)
Para instalar el controlador MOTOTRBO: 1. Cierre todos los programas MOTOTRBO que se estn ejecutando en el equipo. 2. Conecte el cable de programacin a la radio y, a continuacin, al puerto USB del equipo. Encienda la radio. 3. Aparecer de forma automtica la ventana Instalacin de software del controlador. Concluir la instalacin. Haga clic en Cerrar.
En el sistema operativo Microsoft Windows Vista Business (32 bits/ 64 bits)/Home Premium (32 bits/64 bits)
Para instalar el controlador MOTOTRBO: 1. Cierre todos los programas MOTOTRBO que se estn ejecutando en el equipo. 2. Conecte el cable de programacin a la radio y, a continuacin, al puerto USB del equipo. Encienda la radio.
Espaol
20
3. Aparecer de forma automtica la ventana Instalacin de software del controlador. Concluir la instalacin. Haga clic en Cerrar.
En el sistema operativo Microsoft Windows XP Professional (32 bits/ 64 bits)/Home (32 bits/64 bits)
Para instalar el controlador MOTOTRBO: 1. Cierre todos los programas MOTOTRBO que se estn ejecutando en el equipo. 2. Conecte el cable de programacin a la radio y, a continuacin, al puerto USB del equipo. Encienda la radio. 3. Se mostrar la ventana Asistente para hardware nuevo encontrado de forma automtica. 4. Seleccione "No por el momento", como se muestra a continuacin. Haga clic en Siguiente.
Espaol
21
5. Seleccione Instalar automticamente el software (recomendado), como se muestra a continuacin. Haga clic en Siguiente.
6. Espere mientras el equipo busca e instala el controlador. 7. Si el equipo no puede encontrar el controlador, aparecer la pantalla siguiente. Haga clic en Examinar para localizar manualmente el controlador. La ruta predeterminada para el controlador es C: \Archivos de programa\Archivos comunes\Motorola\MOTOTRBO Driver. Una vez que haya encontrado el controlador, haga clic en Aceptar.
8. Espere mientras el equipo instala el controlador. 9. Una vez terminada la instalacin, haga clic en Finalizar. 10. Para concluir la instalacin del controlador, contine con el apartado Configuracin de la conexin de rea local MOTOTRBO en el equipo en la pgina 22.
Espaol
22
Espaol
23
5. Desactive todas las casillas EXCEPTO "Protocolo de Internet (TCP/IP)". Seleccione "Mostrar el icono en rea de notificacin cuando se conecta" y "Notificarme cuando esta conexin tenga conectividad limitada o nula". Nota: La opcin "Notificarme cuando esta conexin tenga conectividad limitada o nula" puede no estar disponible en todos los equipos.
Espaol
24
En el sistema operativo Microsoft Windows 7 Professional (32 bits/ 64 bits)/Home Premium (32 bits/64 bits)
Para instalar el controlador FlashZap: 1. Cierre todos los programas MOTOTRBO que se estn ejecutando en el equipo. 2. Conecte el cable de programacin a la radio y, a continuacin, al puerto USB del equipo. Encienda la radio. 3. Aparecer de forma automtica la ventana Instalacin de software del controlador. Concluir la instalacin. Haga clic en Cerrar.
En el sistema operativo Microsoft Windows Vista Business (32 bits/ 64 bits)/Home Premium (32 bits/64 bits)
Para instalar el controlador FlashZap: 1. Cierre todos los programas MOTOTRBO que se estn ejecutando en el equipo. 2. Conecte el cable de programacin a la radio y, a continuacin, al puerto USB del equipo. Encienda la radio.
Espaol
25
3. Aparecer de forma automtica la ventana Instalacin de software del controlador. Concluir la instalacin. Haga clic en Cerrar.
En el sistema operativo Microsoft Windows XP Professional (32 bits/ 64 bits)/Home (32 bits/64 bits)
Para instalar el controlador FlashZap: 1. Cierre todos los programas MOTOTRBO que se estn ejecutando en el equipo. 2. Conecte el cable de programacin a la radio y, a continuacin, al puerto USB del equipo. Encienda la radio. 3. Inicie CPS en el equipo. 4. En el men CPS, seleccione Dispositivo => Actualizar/Recuperar. 5. Aparecer el cuadro de dilogo Actualizar/recuperar dispositivo. Seleccione el paquete del firmware y conector de cdigo y haga clic en Aceptar. 6. Se mostrar la ventana Asistente para hardware nuevo encontrado de forma automtica. 7. Si no se ha instalado el controlador FlashZap, CPS mostrar un mensaje de error. Haga clic en Aceptar.
Espaol
26
8. Seleccione Instalar automticamente el software (recomendado), como se muestra a continuacin. Haga clic en Siguiente.
9. Espere mientras el equipo busca e instala el controlador. 10. Si el equipo no puede encontrar el controlador, aparecer la pantalla siguiente. Haga clic en Examinar para localizar manualmente el controlador. La ruta predeterminada para el controlador es C: \Archivos de programa\Archivos comunes\Motorola\MOTOTRBO Driver. Una vez que haya encontrado el controlador, haga clic en Aceptar.
11. Espere mientras el equipo instala el controlador. 12. Una vez terminada la instalacin, haga clic en Finalizar. Se habr instalado correctamente el controlador en el sistema operativo Windows XP Home/Professional. Despus de la instalacin del controlador FlashZap, reinicie la funcin de actualizacin o recuperacin del dispositivo.
Espaol
27
Espaol
Copyright di documenti
vietato duplicare o distribuire il presente documento o qualsiasi sua parte senza l'esplicito permesso scritto di Motorola. Nessuna parte di questo manuale pu essere riprodotta, distribuita o trasmessa in qualsiasi forma o con qualsiasi mezzo, elettronico o meccanico, per qualsiasi scopo senza l'esplicito permesso scritto di Motorola.
Esclusione di responsabilit
Le informazioni presenti in questo documento sono state sottoposte a un attento esame e sono da considerarsi completamente affidabili. Tuttavia, non si assumono responsabilit in caso di inesattezze. Inoltre, Motorola si riserva il diritto di apportare modifiche ai prodotti qui descritti allo scopo di migliorarne la leggibilit, il funzionamento o la progettazione. Motorola non si assume alcuna responsabilit derivante dalle applicazioni o dall'utilizzo di qualsiasi prodotto o circuito qui descritto; n copre eventuali licenze ai sensi dei diritti sui brevetti o dei diritti di terzi.
Marchi registrati
MOTOROLA e il logo della M stilizzata sono marchi registrati presso lo US Patent and Trademark Office. Tutti gli altri nomi di prodotti o servizi appartengono ai rispettivi proprietari. 2007 - 2013 di Motorola Solutions, Inc.
NOTA
Sommario
Introduzione ................................................................................................................... 1 Requisiti per l'installazione del sistema ...................................................................... 1 Cavi di programmazione............................................................................................. 3 Diritti di accesso ......................................................................................................... 3 Istruzioni per l'installazione di CPS (Customer Programming Software) ............................................................................. 5 Istruzioni per l'installazione di Radio Management ................................................... 7 Ulteriori istruzioni per l'installazione sui sistemi operativi avanzati ........................ 9 Istruzioni per l'installazione dell'applicazione Tuner ............................................... 10 Istruzioni per l'installazione di AirTracer................................................................... 11 Installazione dell'applicazione RDAC (Repeater Diagnostics and Control) Istruzioni 12 Troubleshooting per l'installazione ........................................................................... 13 Istruzioni per l' installazione invisibile all'utente...................................................... 14 Istruzioni di installazione aggiuntive per Windows 8............................................... 16 Installazione del driver MOTOTRBO .......................................................................... 17 Sul sistema operativo Microsoft Windows 7 Professional (32 bit/64 bit)/Home Premium (32 bit/64 bit)............................................................. 17 Sul sistema operativo Microsoft Windows Vista Business (32 bit/64 bit)/Home Premium (32 bit/64 bit)............................................................. 17 Sul sistema operativo Microsoft Windows XP Professional (32 bit/64 bit)/Home (32 bit/64 bit) ............................................................................ 18 Configurazione della connessione alla rete locale MOTOTRBO sul computer ..... 20 Installazione del driver FlashZap ............................................................................... 22 Sul sistema operativo Microsoft Windows 7 Professional (32 bit/64 bit)/Home Premium (32 bit/64 bit)............................................................. 22 Sul sistema operativo Microsoft Windows Vista Business (32 bit/64 bit)/Home Premium (32 bit/64 bit)............................................................. 22 Sul sistema operativo Microsoft Windows XP Professional (32 bit/64 bit)/Home (32 bit/64 bit) ............................................................................ 23 Recupero del pacchetto di aggiornamento del firmware e del codeplug........................................................................................ 25
Italiano
NOTA
Italiano
Introduzione
Prima di eseguire il pacchetto di installazione delle applicazioni CPS, Tuner e AirTracer MOTOTRBO disponibili sui kit del CD GMVN5141_, leggere le istruzioni riportate di seguito. Accertarsi di leggere attentamente tutte le istruzioni visualizzate sullo schermo durante l'installazione. Il CD GMVN5141_ del software per CPS, Tuner e AirTracer disponibile per l'acquisto e le applicazioni software e i relativi aggiornamenti possono essere scaricati gratuitamente dal sito Web Motorola Online. Il CD GMVN5520_ del software RDAC solo disponibile per l'acquisto sul sito Web Motorola Online. Per visitare il sito Motorola Online, accedere all'indirizzo: https://emeaonline.motorola.com/Login.aspx (area geografica EMEA) https://asiaonline.motorola.com/ (area geografica ANZ)
Italiano
DVD-ROM per l'installazione del software. Nota Questa configurazione richiesta per l'utilizzo di codeplug di grandi dimensioni.
Requisiti hardware minimi Processore: Pentium da 1 GHz. Memoria: 1 GB di memoria RAM disponibile, escluso l'uso della memoria per la scheda grafica integrata. Grafica di classe DirectX 9. Almeno 250 MB di spazio disponibile sul disco rigido. Porta USB per le comunicazioni radio. DVD-ROM per l'installazione del software. Nota Se il PC non soddisfa la configurazione consigliata, le prestazioni dell'applicazione CPS potrebbero risultare ridotte.
Italiano
Cavi di programmazione
Numero parte Motorola PMKN4012B* Nome cavo Cavo di programmazione portatile Cavo per la programmazione, il test e l'allineamento della radio portatile Cavo di programmazione anteriore per radio mobile Cavo di programmazione posteriore per radiomobile e ripetitore Cavo di programmazione, test e allineamento posteriore per radiomobile e ripetitore Descrizione Il cavo collega la radio a una porta USB per la programmazione della radio e le applicazioni dati. Il cavo collega la radio a una porta USB per la programmazione, le applicazioni dati, il test e l'allineamento della radio. Il cavo collega il connettore anteriore della radio a una porta USB per la programmazione della radio e le applicazioni dati. Il cavo collega il connettore posteriore della radio a una porta USB per la programmazione e le applicazioni dati della radio. Il cavo collega il connettore posteriore della radio a una porta USB per la programmazione, le applicazioni dati, il test e l'allineamento della radio.
PMKN4013C*
HKN6184_
PMKN4010_
PMKN4016_
* Le versioni precedenti dei cavi di programmazione non funzionano con le radio DP4000.
Diritti di accesso
Per poter procedere con una qualsiasi delle installazioni, necessario disporre dei diritti di amministratore sul computer di destinazione.
Italiano
NOTA
Italiano
Procedure di installazione
7. In tal caso, selezionare una lingua e fare clic sul pulsante Avanti per passare alla schermata di selezione delle funzioni. 8. Per installare solo l'applicazione CPS, selezionare la casella di controllo CPS (Customer Programming Software) MOTOTRBO.
Italiano
Procedure di installazione
Nota Per installare eventuali componenti di Radio Management, vedere la sezione Istruzioni per l'installazione di Radio Management a pagina 7.
9. Attenersi alle istruzioni visualizzate sullo schermo per completare l'installazione. Nota necessario riavviare il computer, se questa operazione viene richiesta durante il processo di installazione.
10. Se durante l'installazione vengono visualizzati messaggi di Vista o Windows 7 relativi alla sicurezza, fare clic su OK per continuare.
Italiano
Procedure di installazione
Italiano
Procedure di installazione
9. In tal caso, selezionare una lingua e fare clic sul pulsante Avanti per passare alla schermata di selezione delle funzioni.
10. Selezionare le caselle di controllo Customer Programming Software, Radio Management Server e Radio Management Device Programmer MOTOTRBO.
11. Attenersi alle istruzioni visualizzate sullo schermo per completare l'installazione. Nota Riavviare il computer, se questa operazione viene richiesta durante il processo di installazione.
Italiano
Procedure di installazione
2. Installare Radio Management come specificato nella sezione Istruzioni per l'installazione di Radio Management a pagina 7. 3. Ripristinare le autorizzazioni sulle impostazioni di sicurezza precedenti al passaggio 1.
Italiano
10
Procedure di installazione
Italiano
Procedure di installazione
11
Italiano
12
Procedure di installazione
Italiano
Procedure di installazione
13
Per risolvere il problema, uscire dall'installazione e seguire la procedura indicata di seguito. Sui sistemi operativi Microsoft Windows 1. Verificare che il computer soddisfi i requisiti minimi di sistema. Vedere "Requisiti per l'installazione del sistema" a pagina 1. 2. Se sul sistema non installato il Service Pack 2 o il Service Pack 3, scaricare e installare il Service Pack 3 di Microsoft. 3. Eseguire nuovamente l'installazione di CPS/RDAC/Tuner/AirTracer. Problemi relativi a Windows Update Se Windows Update non attivato sul computer con Windows Vista o versioni successive, il programma di installazione di Radio Management Server potrebbe non essere in grado di installare Windows Identity Foundation, il che potrebbe causare un errore d'installazione. Per risolvere il problema, uscire dal programma di installazione e seguire la procedura riportata di seguito. In Microsoft Windows Vista e sistemi operativi successivi 1. Accedere a Pannello di controllo => Sistema e sicurezza => Windows Update e scegliere una delle opzioni che non sia "Non verificare mai disponibilit aggiornamenti". 2. Andare alla pagina Microsoft all'indirizzo http://support.microsoft.com/kb/958043 e seguire la procedura per la riattivazione di Windows Update. 3. Eseguire nuovamente l'installazione.
Italiano
14
Procedure di installazione
CPS Radio Management MOTOTRBO (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
DVD del Programma di installazione Radio Management Job Processor Motorola MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
Italiano
Procedure di installazione
15
DVD del programma di installazione completo Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Italiano
16
Procedure di installazione
Se il computer dispone dellaccesso a Internet: 1. Andare sul Desktop. 2. Aprire Impostazioni => Pannello controllo. 3. Andare in Programmi => Disinstalla un programma. 4. Scegliere Attivazione o disattivazione delle funzionalit Windows dal pannello sinistro. 5. Selezionare .NET Framework 3.5 (include .NET 2.0 e 3.0). 6. Fare clic sul pulsante OK.
Se il computer non dispone dellaccesso a Internet: 1. Inserire il DVD di Windows nellunit DVD del computer. 2. Accedere alla schermata iniziale. 3. Fare clic con il pulsante destro del mouse sulla schermata e selezionare Tutte le app. 4. Scorrere a destra fino a visualizzare Sistema Windows => prompt dei comandi. 5. Fare clic con il pulsante destro del mouse sul prompt dei comandi e selezionare Esegui come amministratore. 6. Digitare DISM /Online /Enable-Feature /FeatureName:NetFx3 /All / LimitAccess /Source:<DVD_Drive>:\sources\sxs, dove <DVD_Drive> deve essere sostituito con lunit che contiene il DVD di Windows, quindi premere Invio. 7. Al termine delloperazione, chiudere il prompt dei comandi.
Italiano
17
Sul sistema operativo Microsoft Windows 7 Professional (32 bit/64 bit)/Home Premium (32 bit/64 bit)
Per installare il driver MOTOTRBO: 1. Chiudere tutti i programmi MOTOTRBO in esecuzione sul computer. 2. Collegare il cavo di programmazione alla radio, quindi collegarlo alla porta USB sul computer. Accendere la radio. 3. Viene visualizzata automaticamente la finestra Installazione del driver del software. Al termine dell'installazione, fare clic su Chiudi.
Sul sistema operativo Microsoft Windows Vista Business (32 bit/64 bit)/Home Premium (32 bit/64 bit)
Per installare il driver MOTOTRBO: 1. Chiudere tutti i programmi MOTOTRBO in esecuzione sul computer. 2. Collegare il cavo di programmazione alla radio, quindi collegarlo alla porta USB sul computer. Accendere la radio.
Italiano
18
3. Viene visualizzata automaticamente la finestra Installazione del driver del software. Al termine dell'installazione, fare clic su Chiudi.
Sul sistema operativo Microsoft Windows XP Professional (32 bit/64 bit)/Home (32 bit/64 bit)
Per installare il driver MOTOTRBO: 1. Chiudere tutti i programmi MOTOTRBO in esecuzione sul computer. 2. Collegare il cavo di programmazione alla radio, quindi collegarlo alla porta USB sul computer. Accendere la radio. 3. Viene visualizzata automaticamente la finestra "Installazione guidata nuovo hardware". 4. Selezionare "No, non ora", come illustrato di seguito. Fare clic su Avanti.
Italiano
19
5. Selezionare "Installa il software automaticamente (scelta consigliata), come illustrato di seguito. Fare clic su Avanti.
6. Attendere qualche istante per consentire al computer di rilevare e installare il driver. 7. Se il computer non riesce ad individuare il driver, viene visualizzata la schermata riportata di seguito. Fare clic su Sfoglia per cercare manualmente il driver. Il percorso predefinito per il driver C:\Programmi\File comuni\Motorola\MOTOTRBO Driver. Una volta individuato il driver, fare clic su OK.
8. Attendere qualche istante per consentire al computer di installare il driver. 9. Al termine dell'installazione, fare clic su Fine. 10. Passare alla sezione "Configurazione della connessione alla rete locale MOTOTRBO sul computer" a pagina 20 per completare l'installazione del driver.
Italiano
20
Italiano
21
5. Deselezionare tutte le caselle di controllo TRANNE "Protocollo Internet (TCP/IP)". Selezionare "Mostra un'icona nell'area di notifica quando connesso" e "Invia notifica quando la connettivit limitata o assente". Nota L'opzione "Invia notifica quando la connettivit limitata o assente" potrebbe non essere disponibile su tutti i computer.
6. Fare clic su OK. La configurazione della connessione alla rete locale MOTOTRBO stata completata.
Italiano
22
Sul sistema operativo Microsoft Windows 7 Professional (32 bit/64 bit)/Home Premium (32 bit/64 bit)
Per installare il driver FlashZap: 1. Chiudere tutti i programmi MOTOTRBO in esecuzione sul computer. 2. Collegare il cavo di programmazione alla radio, quindi collegarlo alla porta USB sul computer. Accendere la radio. 3. Viene visualizzata automaticamente la finestra Installazione del driver del software. Al termine dell'installazione, fare clic su Chiudi.
Sul sistema operativo Microsoft Windows Vista Business (32 bit/64 bit)/Home Premium (32 bit/64 bit)
Per installare il driver FlashZap: 1. Chiudere tutti i programmi MOTOTRBO in esecuzione sul computer. 2. Collegare il cavo di programmazione alla radio, quindi collegarlo alla porta USB sul computer. Accendere la radio.
Italiano
23
3. Viene visualizzata automaticamente la finestra Installazione del driver del software. Al termine dell'installazione, fare clic su Chiudi.
Sul sistema operativo Microsoft Windows XP Professional (32 bit/64 bit)/Home (32 bit/64 bit)
Per installare il driver FlashZap: 1. Chiudere tutti i programmi MOTOTRBO in esecuzione sul computer. 2. Collegare il cavo di programmazione alla radio, quindi collegarlo alla porta USB sul computer. Accendere la radio. 3. Avviare CPS sul computer. 4. Nel menu CPS, selezionare Dispositivo => Aggiornamento/Ripristino. 5. Quando viene visualizzata la finestra di dialogo Aggiornamento/Ripristino dispositivo, selezionare il pacchetto del firmware e del codeplug e fare clic su OK. 6. Viene visualizzata automaticamente la finestra "Installazione guidata nuovo hardware". 7. Se il driver FlashZap non stato installato, il software CPS visualizza un messaggio di errore. Fare clic su OK.
Italiano
24
8. Selezionare "Installa il software automaticamente (scelta consigliata), come illustrato di seguito. Fare clic su Avanti.
9. Attendere qualche istante per consentire al computer di rilevare e installare il driver. 10. Se il computer non riesce ad individuare il driver, viene visualizzata la schermata riportata di seguito. Fare clic su Sfoglia per cercare manualmente il driver. Il percorso predefinito per il driver C:\Programmi\File comuni\Motorola\MOTOTRBO Driver. Una volta individuato il driver, fare clic su OK.
11. Attendere qualche istante per consentire al computer di installare il driver. 12. Al termine dell'installazione, fare clic su Fine. Il driver stato installato correttamente sul sistema operativo Windows XP Home/ Professional. Al termine dell'installazione del driver Flashzap, riavviare la funzione di aggiornamento o ripristino del dispositivo.
Italiano
25
Italiano
Zastrzeenie
Informacje zawarte w tym dokumencie zostay dokadnie zweryfikowane i uwaamy je za cakowicie poprawne. Nie przyjmujemy jednak adnej odpowiedzialnoci za niecisoci. Ponadto, firma Motorola zastrzega sobie prawo do dokonywania zmian we wszystkich opisanych tutaj produktach w celu poprawienia czytelnoci, funkcjonalnoci lub konstrukcji. Firma Motorola nie przyjmuje adnych zobowiza wynikajcych ze stosowania lub uytkowania wszelkich produktw lub obwodw opisanych w tym dokumencie, ani nie obejmuje adnej licencji objtej wasnymi prawami patentowymi lub prawami innych podmiotw.
Znaki towarowe
Nazwa MOTOROLA oraz stylizowane logo M zostay zastrzeone w Amerykaskim Biurze Patentw i Znakw Towarowych. Wszelkie inne nazwy produktw i usug nale do odpowiednich wacicieli. 2007 2013 by Motorola Solutions, Inc.
UWAGI
Spis treci
Wprowadzenie................................................................................................................ 1 Wymagania dla instalacji systemu............................................................................... 1 Kable do programowania............................................................................................ 3 Prawa dostpu............................................................................................................ 3 Instrukcja instalacji oprogramowania CPS ................................................................. 5 Instrukcja instalacji Zarzdzania cznoci radiow ................................................ 7 Dodatkowe informacje o instalacji dla zabezpieczonych systemw operacyjnych ............................................................................................... 9 Instrukcja instalacji tunera.......................................................................................... 10 Instrukcja instalacji AirTracer..................................................................................... 11 Instalacja oprogramowania RDAC Instrukcje ........................................................... 12 Rozwizywanie problemw z instalacj .................................................................... 13 Instrukcja cichej instalacji .......................................................................................... 14 Dodatkowe instrukcje instalacji systemu operacyjnego Windows 8 .................................................................................................................... 16 Instalowanie sterownika MOTOTRBO........................................................................ 17 W systemie Microsoft Windows 7 Professional (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy) .................... 17 W systemie Microsoft Windows Vista Business (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy) .................... 17 W systemie operacyjnym Microsoft Windows XP Professional (32-bitowy/64-bitowy)/System operacyjny Home (32-bitowy/64-bitowy) .................. 18 Konfigurowanie poczenia lokalnego MOTOTRBO na komputerze.............................................................................................................. 20 Instalowanie sterownika FlashZap............................................................................. 22 W systemie Microsoft Windows 7 Professional (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy) .................... 22 W systemie Microsoft Windows Vista Business (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy) .................... 22 W systemie operacyjnym Microsoft Windows XP Professional (32-bitowy/64-bitowy)/System operacyjny Home (32-bitowy/64-bitowy) .................. 23 Pobieranie oprogramowania sprztowego i pakietu aktualizacji Codeplug................................................................................... 25
Polski
UWAGI
Polski
Wprowadzenie
Przeczytaj ponisze instrukcje przed instalacj pakietu dla dowolnej aplikacji MOTOTRBO CPS, Tuner i AirTracer dostpnej na zestawach CD GMVN5141_. Naley pamita o uwanym przeczytaniu wszystkich wywietlanych na ekranie instrukcji podczas instalacji. Dysk CD GMVN5141_ CPS, Tuner i AirTracer jest dostpny do zakupienia, natomiast aplikacje i odpowiednie aktualizacje mona pobra bezpatnie z witryny Motorola Online. Dysk CD z oprogramowaniem RDAC GMVN5520_ jest dostpny do zakupienia w witrynie Motorola Online. Witryna Motorola Online jest dostpna pod adresem: https://emeaonline.motorola.com/Login.aspx (region EMEA) https://asiaonline.motorola.com/ (region ANZ)
Polski
Napd DVD do instalacji oprogramowania. Uwaga: Ta konfiguracja jest wymagana przy pracy z duymi codeplugami.
Minimalne wymagania sprztowe: Procesor: 1 GHz procesor klasy Pentium. Pami: 1 GB RAM wolnej pamici, z wyczeniem wykorzystania pamici przez zintegrowan kart graficzn. Obsuga grafiki klasy DirectX 9 Minimum 250 MB wolnej przestrzeni dyskowej Port USB do komunikacji radiowej Napd DVD do instalacji oprogramowania. Uwaga: Jeli komputer nie spenia rekomendowanych wymaga sprztowych, wydajno CPS moe by obniona.
Polski
Kable do programowania
Numer katalogowy Motorola PMKN4012B* Nazwa kabla Przenony kabel do programowania Kabel do programowania, testowania i regulacji Radiotelefony przenone przewd do programowania Tylny kabel do programowania telefonu i regeneratora Tylny kabel do programowania, testowania i regulacji telefonu i regeneratora Opis Ten kabel pozwala podczy radiotelefon do portu USB podczas programowania i obsugi danych radiotelefonu. Ten kabel pozwala podczy radiotelefon do portu USB podczas programowania, testowania i regulacji radiotelefonu. Ten kabel pozwala podczy przednie zcze radiotelefonu do portu USB podczas programowania i obsugi danych radiotelefonu. Ten kabel pozwala podczy tylne zcze radiotelefonu do portu USB podczas programowania i obsugi danych radiotelefonu. Ten kabel pozwala podczy tylne zcze radiotelefonu do portu USB podczas programowania, testowania i regulacji radiotelefonu.
PMKN4013C*
HKN6184_
PMKN4010_
PMKN4016_
Prawa dostpu
Aby wykona jedn z instalacji, na komputerze docelowym naley mie uprawnienia administratora.
Polski
UWAGI
Polski
Procedury instalacji
7. Jeli pojawi si ten monit, wybierz jzyk i kliknij przycisk Dalej, by przej do ekranu wyboru funkcji. 8. Aby zainstalowa jedynie CPS, zaznacz pole oznaczone Oprogramowanie do programowania dla klientw MOTOTRBO (Customer Programming Software). Uwaga: W wypadku instalacji komponentw zarzdzania cznoci radiow, zobacz Instrukcja instalacji Zarzdzania cznoci radiow na stronie strona 7.
Polski
Procedury instalacji
9. Wykonaj instrukcje na ekranie, by zakoczy proces instalacji. Uwaga: Podczas procesu instalacji moe by wymagane uruchomienie ponownie komputera.
10. Jeli podczas instalacji w systemie Vista lub Windows 7 wywietlony zostanie monit bezpieczestwa, kliknij "OK" by kontynuowa
Polski
Procedury instalacji
Polski
Procedury instalacji
9. Jeli pojawi si ten monit, wybierz jzyk i kliknij przycisk Dalej, by przej do ekranu wyboru funkcji.
10. Zaznacz pola Oprogramowanie do programowania dla klientw MOTOTRBO (Customer Programming Software), Serwer zarzdzania cznoci radiow (Radio Management Server), oraz Programowanie urzdzenia do cznoci radiowej (Radio Management Device Programmer).
11. Wykonaj instrukcje na ekranie, by zakoczy proces instalacji. Uwaga: Uruchom komputer ponownie, jeli podczas instalacji pojawi si proba o wykonanie tej czynnoci
Polski
Procedury instalacji
2. Zainstaluj zarzdzanie cznoci radiow zgodnie z instrukcjami w sekcji Instrukcja instalacji Zarzdzania cznoci radiow na stronie strona 7. 3. Przywr ustawienia do stanu w jakim znajdoway si przed wykonaniem kroku 1.
Polski
10
Procedury instalacji
Polski
Procedury instalacji
11
Polski
12
Procedury instalacji
Polski
Procedury instalacji
13
Aby rozwiza ten problem, zamknij instalacj i wykonaj ponisze kroki. W systemie operacyjnym Microsoft Windows 1. Upewnij si, e system spenia minimalne wymagania. Patrz Wymagania dla instalacji systemu na str. 1. 2. Jeli w systemie nie zainstalowano pakietu Service Pack 2 lub Service Pack 3, pobierz i zainstaluj pakiet Service Pack 3 z firmy Microsoft. 3. Uruchom ponownie instalacj CPS/RDAC/Tuner/AirTracer. Problemy z usluga Windows Update Jesli w systemie Windows Vista lub nowszym nie jest wlaczona usluga Windows Update, instalacja serwera Radio Management Server moze nie byc w stanie zainstalowac elementu Windows Identity Foundation, co moze uniemozliwic instalacje. Aby rozwiazac ten problem, zamknij instalacje i wykonaj ponizsze kroki. W systemie operacyjnym Microsoft Windows Vista lub nowszym 1. W Panelu sterowania wybierz menu System i zabezpieczenia, a nastepnie Windows Update i wybierz jedna z opcji poza Nigdy nie sprawdzaj, czy sa aktualizacje. 2. Odwiedz witryne firmy Microsoft pod adresem http://support.microsoft.com/kb/ 958043 i postepuj zgodnie z instrukcjami, aby w pelni wlaczyc usluge Windows Update. 3. Uruchom instalacje ponownie.
Polski
14
Procedury instalacji
MOTOTRBO CPS Radio Management (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
DVD Motorola RM Job Processor Installer MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
Polski
Procedury instalacji
15
DVD Full Installer Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
Polski
16
Procedury instalacji
Jezeli komputer nie ma dostepu do Internetu: 1. Wlz plyte DVD z systemem Windows do napedu DVD komputera. 2. Przejdz do ekranu startowego. 3. Kliknij ekran prawym przyciskiem myszy i wybierz Wszystkie aplikacje. 4. Przewijaj w prawo do aplikacji System => Wiersz polecenia. 5. Kliknij wiersz polecenia prawym przyciskiem myszy i wybierz opcje Uruchom jako administrator. 6. Wprowadz polecenie DISM /Online /Enable-Feature / FeatureName:NetFx3 /All /LimitAccess / Source:<DVD_Drive>:\sources\sxs, gdzie <DVD_Drive> nalezy zastapic litera napedu, w ktrym znajduje sie plyta DVD z systemem Windows, a nastepnie nacisnij Enter. 7. Zamknij wiersz polecenia po zakonczeniu operacji. Wiecej informacji mozna znalezc na stronie firmy Microsoft http://msdn.microsoft.com/en-us/library/hh506443.aspx.
Polski
17
W systemie Microsoft Windows 7 Professional (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy)
Aby zainstalowa sterownik MOTOTRBO: 1. Wycz wszystkie uruchomione na komputerze programy MOTOTRBO. 2. Podcz kabel do programowania do radiotelefonu, a nastpnie podcz drugi koniec do portu USB w komputerze. Wcz radiotelefon. 3. Okno instalacji oprogramowania sterownika zostanie wywietlone automatycznie. Instalacja zostanie zakoczona. Kliknij przycisk Zamknij.
W systemie Microsoft Windows Vista Business (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy)
Aby zainstalowa sterownik MOTOTRBO: 1. Wycz wszystkie uruchomione na komputerze programy MOTOTRBO. 2. Podcz kabel do programowania do radiotelefonu, a nastpnie podcz drugi koniec do portu USB w komputerze. Wcz radiotelefon.
Polski
18
3. Okno instalacji oprogramowania sterownika zostanie wywietlone automatycznie. Instalacja zostanie zakoczona. Kliknij przycisk Zamknij.
Polski
19
5. Wybierz opcj Zainstaluj automatycznie oprogramowanie (zalecane), jak pokazano poniej. Kliknij Dalej.
6. Zaczekaj, a komputer wyszuka i zainstaluje sterownik. 7. Jeli komputer nie znajdzie sterownika, zostanie wywietlony nastpujcy ekran. Kliknij przycisk Przegldaj, aby rcznie zlokalizowa sterownik. Domylna cieka dla sterownika to C:\Program Files\Common Files\Motorola\MOTOTRBO Driver. Po zlokalizowaniu sterownika kliknij przycisk OK.
8. Zaczekaj, a komputer zainstaluje sterownik. 9. Po zakoczeniu instalacji kliknij przycisk Zakocz. 10. Przejd do Konfigurowanie poczenia lokalnego MOTOTRBO na komputerze na str. 20, aby zakoczy instalacj sterownika.
Polski
20
Polski
21
5. Usu zaznaczenia ze wszystkich pl Z WYJTKIEM Protok wewntrzny (TCP/ IP). Wybierz Poka ikon w obszarze powiadomie po poczeniu i Powiadom mnie, kiedy to poczenie ma ograniczon czno lub jej brak. Uwaga: Opcja Powiadom mnie, kiedy to poczenie ma ograniczon czno lub jej brak moe nie by dostpna na wszystkich komputerach.
Polski
22
W systemie Microsoft Windows 7 Professional (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy)
Aby zainstalowa sterownik FlashZap: 1. Wycz wszystkie uruchomione na komputerze programy MOTOTRBO. 2. Podcz kabel do programowania do radiotelefonu, a nastpnie podcz drugi koniec do portu USB w komputerze. Wcz radiotelefon. 3. Okno instalacji oprogramowania sterownika zostanie wywietlone automatycznie. Instalacja zostanie zakoczona. Kliknij przycisk Zamknij.
W systemie Microsoft Windows Vista Business (32-bitowy/ 64-bitowy)/System operacyjny Home Premium (32-bitowy/64-bitowy)
Aby zainstalowa sterownik FlashZap: 1. Wycz wszystkie uruchomione na komputerze programy MOTOTRBO. 2. Podcz kabel do programowania do radiotelefonu, a nastpnie podcz drugi koniec do portu USB w komputerze. Wcz radiotelefon.
Polski
23
3. Okno instalacji oprogramowania sterownika zostanie wywietlone automatycznie. Instalacja zostanie zakoczona. Kliknij przycisk Zamknij.
Polski
24
8. Wybierz opcj Zainstaluj automatycznie oprogramowanie (zalecane), jak pokazano poniej. Kliknij Dalej.
9. Zaczekaj, a komputer wyszuka i zainstaluje sterownik. 10. Jeli komputer nie znajdzie sterownika, zostanie wywietlony nastpujcy ekran. Kliknij przycisk Przegldaj, aby rcznie zlokalizowa sterownik. Domylna cieka dla sterownika to C:\Program Files\Common Files\Motorola\MOTOTRBO Driver. Po zlokalizowaniu sterownika kliknij przycisk OK.
11. Zaczekaj, a komputer zainstaluje sterownik. 12. Po zakoczeniu instalacji kliknij przycisk Zakocz. Pomylnie zainstalowano sterownik w systemie operacyjnym Windows XP Home/ Professional. Po zakoczeniu instalacji sterownika FlashZap uruchom ponownie funkcj aktualizacja urzdzenia lub odzyskiwanie.
Polski
25
Polski
Motorola Motorola, . Motorola , , , . Motorola, Motorola, , , , , Motorola. , Motorola , , , - , , Motorola, , .
Motorola. , ( ) Motorola.
. . , , . Motorola , , , , .
MOTOROLA M . . 2007 2013 Motorola Solutions, Inc.
....................................................................................................................... 1 ........................................................................ 1 ............................................................................... 3 ........................................................................................................... 3 (CPS) ............................................................................................................................... 5 Radio Management ......................................................... 7 .......................................................................................................................... 10 Tuner .............................................................................. 11 AirTracer ........................................................................ 12 (RDAC) .................................................................................................................. 12 ......................................................... 13 ........................................................... 15 Windows 8.............................. 17 MOTOTRBO ............................................................................ 19 Microsoft Windows 7 Professional (32-/ 64- )/Home Premium (32-/64- ) .... 19 Microsoft Windows Vista Business (32-/ 64- )/Home Premium (32-/64- ) .... 19 Microsoft Windows XP Professional (32-/ 64- )/Home (32-/64- ) ................... 20 MOTOTRBO ...................................................................................... 22 FlashZap.................................................................................. 24 Microsoft Windows 7 Professional (32-/ 64- )/Home Premium (32-/64- ) .... 24 Microsoft Windows Vista Business (32-/ 64- )/Home Premium (32-/64- ) .... 24 Microsoft Windows XP Professional (32-/ 64- )/Home (32-/64- ) ................... 25 ........................................................................................................... 27
MOTOTRBO CPS, Tuner AirTracer, - GMVN5141_, . . - GMVN5141_ CPS, Tuner AirTracer Motorola Online, - Motorola Online. - GMVN5520_ RDAC Motorola Online. Motorola Online : https://emeaonline.motorola.com/Login.aspx (, ) https://asiaonline.motorola.com/ ( )
, MOTOTRBO CPS, Tuner, AirTracer RDAC, . : ( MOTOTRBO RDAC, Tuner, AirTracer CPS Radio Management Server Radio Management Device Programmer) Windows 8, 32- 64- Windows 7 Professional, 32- 64- Windows 7 Home Premium, 32- 64- Windows Vista Business, 32- 64- Windows Vista Home Premium, 32- 64- Windows XP Professional, 64- , Service Pack 2 Windows XP Professional/Home, 32- , Service Pack 3 : ( MOTOTRBO CPS Radio Management Server Radio Management Device Programmer) Windows 8, 32- 64- Windows 7 Home Premium Professional (SP 2 ), 32- 64 Windows Server 2008 R2 SP1, 32- 64- : : Pentium, 2 , . : 2 . Aero, 128 . 2 . USB- DVD-ROM . . .
Motorola PMKN4012B* , , , , , USB . USB , , . USB .
PMKN4013C*
HKN6184_
PMKN4010_
USB .
PMKN4016_
USB , , .
* DP4000.
, .
(CPS)
1. . 2. , . 3. , , . Windows Vista , . 4. DVD DVD-. DVD- DVD-. 5. , , . , Setup.exe DVD- . 6. , .
7. , . 8. CPS, MOTOTRBO Customer Programming Software ( MOTOTRBO). . Radio Management . Radio Management . 7.
9. . . .
Radio Management
, , Radio Management: MOTOTRBO Customer Programming Software ( MOTOTRBO), Radio Management Server ( Radio Management) Radio Management Device Programmer ( Radio Management). 1. Windows 8, . " Windows 8" . 2. (Hardened), . . 10 . 3. . 4. , . 5. , , . Windows Vista , . 6. DVD DVD-. DVD- DVD-. 7. , , . , Setup.exe DVD- .
8. , .
9. , .
11. . . .
10
Radio Management . . 1. , , . Microsoft SQL Server, Radio Management Server. , , , . SeBackupPrivilege SeDebugPrivilege SeSecurityPrivilege
11
Tuner
1. Windows 8, . " Windows 8" . 2. MOTOTRBO. 3. , . 4. - . 5. Tuner. . , - Autorun.exe , 4. 6. . 7. , . 8. . 9. Tuner MOTOTRBO (. MOTOTRBO . 19) MOTOTRBO (. MOTOTRBO . 22).
12
AirTracer
1. Windows 8, . " Windows 8" . 2. MOTOTRBO. 3. , . 4. - . 5. AirTracer. . , - Autorun.exe , 4. 6. . 7. , . 8. . 9. AirTracer MOTOTRBO (. MOTOTRBO . 19) MOTOTRBO (. MOTOTRBO . 22).
(RDAC)
1. Windows 8, . " Windows 8" . 2. MOTOTRBO. 3. , . 4. - . 5. RDAC. . , - Autorun.exe , 4. 6. . 7. , . 8. . 9. RDAC USB, MOTOTRBO (.
13
Windows Windows , .
, . Microsoft Windows 1. , . . . 1. 2. Service Pack 2 Service Pack 3, Service Pack 3 Microsoft . 3. CPS/RDAC/Tuner/AirTracer. Windows Windows Windows Vista , , Radio Management Server Windows Identity Foundation. . , .
14
Microsoft Windows Vista 1. Windows , " ". 2. Microsoft http://support.microsoft.com/kb/ 958043 Windows. 3. .
15
MOTOTRBO, RM Server, RM Device Programmer, RM Job Processor, MOTOTRBO AirTracer, MOTOTRBO RDAC MOTOTRBO Tuner . . , : 1. ( Windows Vista " "). 2. cd . 3. . , Feature1, Feature2 , . C:\log.txt .
MOTOTRBO (cps_<version>_standalone.zip) Setup.exe /s /v" /qn" Setup.exe /s /v"/qn /l*vx \"C:\log.txt\""
MOTOTRBO CPS Radio Management (cps_<version>.zip) Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
DVD Motorola RM Job Processor Installer MOTOTRBO_RMJobProcessor.exe /silent MOTOTRBO_RMJobProcessor.exe /silent /debuglog
16
DVD Full Installer Setup.exe /silent ISFeatureInstall=Feature1,Feature2 Setup.exe /silent /debuglog ISFeatureInstall=Feature1,Feature2
17
Windows 8
Radio Management, MOTOTRBO AirTracer, MOTOTRBO RDAC MOTOTRBO Tuner Windows 8 Windows .NET Framework 3.5, . : 1. . 2. "" => " ". 3. "" => " ". 4. " Windows" . 5. ".NET Framework 3.5 ( .NET 2.0 3.0)". 6. "OK".
: 1. DVD- Windows DVD- . 2. . 3. " ". 4. , " Windows" -> . 5. " ". 6. "DISM /Online /Enable-Feature /FeatureName:NetFx3 /All / LimitAccess /Source:<DVD_Drive>:\sources\sxs", <DVD_Drive> DVD-, DVD- Windows, "". 7. . . Microsoft http://msdn.microsoft.com/en-us/library/hh506443.aspx.
18
MOTOTRBO
19
MOTOTRBO
MOTOTRBO MOTOTRBO MOTOTRBO, USB CPS, Tuner AirTracer. , USB RDAC, MOTOTRBO MOTOTRBO.
20
MOTOTRBO
3. . . .
MOTOTRBO
21
5. (), . .
8. , . 9. . 10. MOTOTRBO . 22 .
22
MO-
MOTOTRBO
MOTOTRBO . 1. => => => => . 2. => . 3. , MOTOTRBO. . . , .
4. .
MOTOTRBO
23
5. (TCP/IP). . . .
6. OK. MOTOTRBO .
24
FlashZap
FlashZap
, CPS FlashZap/. .
FlashZap
25
3. . . .
26
FlashZap
8. (), . .
27
. 1. -. 2. - Motorola Online https://emeaonline.motorola.com/Login.aspx (, ) https://asiaonline.motorola.com/ ( ), . 3. MOL . .
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2006 2013 Motorola Solutions, Inc. All rights reserved. May 2013. www.motorolasolutions.com/mototrbo
*6866574D23*
6866574D23-H