Documente Academic
Documente Profesional
Documente Cultură
TECHNICAL PARAMETERS
3 Phase 4 Wire (LV ) 230/400 Volts 50/60 Hz 5 Amp (CT Operated) Volts Phase to phase. Phase to neutral, Minimum and maximum values Phase, neutral & total, Minimum and maximum values Phase & total Phase & total Phase & total Phase & total System Frequency Present demand with time into period kW, kVAR, kVA, kA Peak demand kW, kVAR, kVAh, kA Total kWh, kVARh, kVAh Total kWh, kVARh kWh & kVAh
Amps Power Factor INST kW INST kVARh INST kVAh Hz Act Demand Max Demand Energy IMP Energy EXP Pulse Outputs
Sequence
The IC970 is a single key operation device. To obtain information press the appropriate key ; e.g. to display voltage, press the VOLTS key. The following information will be displayed showing readout between phase to phase and phase to neutral.
VOLTAGE L1 - 230.0 L1 -L2 -400.0 L2 - 230.0 L2-L3 -400.0 L3 - 230.0 L3-L1 -400.0
System Use
Although the IC 970 meter can be used in a stand alone situation, it is ideal for sub metering measuring from different depar tments and locations. The meter has been designed to accept a plug in communication module (RS 485) which enables it to work with the new Autometers Systems Horizon range of data loggers and data transfer systems as well as many other management systems.
Introduction
The Autometers information centre 900 series is a new range of meters which has been specifically designed to meet the strict requirements of switchboard manufacturers around the world. Designed to be a meter which is not only ver y accurate but small and compact, (96 square mm) easy to install. I t also has an optional advantage of being able to be fitted at a later date with communication modules for BMS systems. The IC 900 series is a range of Multifunction meters offering many different types of information ranging from just kWh (IC 910) to a meter showing many parameters including voltage and current harmonic analysing. (IC 990) All the 900 series meters have been designed to be fully compliant to integrate with the Autometers Horizon range of modules for data logging and interrogation.
Product Range
Metering and monitoring equipment ranges from single phase and Polyphase kWh electromechanical meters to a sophisticated range of fully programmable information centres. Also available are Electronic Meters, Panel Mounted Meters, Maximum Demand Meters, DIN Rail Meters and Current Transformers.
Information
On pressing the information k ey, a sequence of readouts indicating the meters parameters will be displayed on the front panel: M odel Number Version Number Serial Number C T Setting and Neutral C T Setting Pulse Settings Func tion Features
Dimension and
BS EN 61036 Active 1.0, reactive 2.0 3 x 230/400 volt 5 amp 6 amp 50/60 Hz 5000 imp/kWh, 5000 imp/kVarh 200v 250 v - 10C + 50C - 10C + 60C <=95% 0.01VA @5A; 1.5W 10VA @230 volt BS EN 62053 -31
Terminal Arrangements
90 mm
90 mm
96 mm
89 mm 103 mm
Functions
Supplied As Standard Function 12 Function 13 Function 21 Function 22 Function 30 Function 31 Function 50 Function 51 Function 52 Function 60 Function 61 Function 62 Peak maximum demand reset C.T and N.T current transformer setting Pulse value Pulse Duration Display contrast Back light Duration Connection details Relay test mode Binary switch positions Minimum and maximum volts Minimum and maximum amps Minimum and maximum neutral amp View only Programmable Programmable Programmable Programmable Programmable View only View only View only View only View only View only
The attention of the specifier, purchaser, installer or user is drawn to special measures and limitations to use which must be observed when these products are taken into service to maintain compliance with the CE directives. Details of these special measures and limitations of use are available from HMSO. REF: IEC 1000-5-1(BS195/210788DC) IEC 1000-5-2 (BS 195/214642DC) IEC 10000-5-6 (BS 195/210789DC). Product development is continuous and Autometers Systems Ltd reser ves the right to make alterations and manufacture without notice. Products as delivered may therefore differ from the descriptions and illustrations in this publication.
Tel: +44 (0) 161 861 9056 Fax: +44 (0) 161 881 3745 www.autometers.co.uk Email: sales@autometers.co.uk
Sales Leaflet IC970 17.07.07