0 evaluări0% au considerat acest document util (0 voturi)
29 vizualizări2 pagini
Winding Instruction Start on pin(s) 3 and wind 11 turns (x 2 filar) of item. In 1 layer(s) from left to right. On the final layer, spread the winding evenly across entire bobbin.
Winding Instruction Start on pin(s) 3 and wind 11 turns (x 2 filar) of item. In 1 layer(s) from left to right. On the final layer, spread the winding evenly across entire bobbin.
Winding Instruction Start on pin(s) 3 and wind 11 turns (x 2 filar) of item. In 1 layer(s) from left to right. On the final layer, spread the winding evenly across entire bobbin.
Electrical Diagram EZ POwER
ETDS4/17/11
1— |p 9
P2117 : EE 35,00, 77
2x Ha AWG 2xHOS TW.
2—*H{ || 8
Pret 117 -25,00V, 77
2x #24 AWG 2x #25T IW.
3 10
m5
Bias, 37
2x #25 AWG
Ke 4
Pri = Primary Winding (Section 1)
imary Winding (Section 2)
TW. = Triple insulated Wire
Mechanical Diagram
1 [#F% Primary Winding (Section 2)
£ [24> Primary Winding (Section 2) |
|e - 35,00 10
8
a
a 35,00 8
4 re inding
5
Es #& Primary Winding (Section 1)
KEY
@ Mechanical start of winding (also denotes electrical phase)
‘Fe Direction of winding (clockwise)
‘Winding Instruction
Primary Winding (Section 1)
Jott pug) 3atawaa i tne 2 ap ofem GW 1 ayers) tom BAD ght ON We Mal yer. spread Me McQ eesH sents e¥teDeDDN. FEN BE WRG PRG) 2
Jaca ojerortpe, tm (9, rato
Bias Winding
[seit png) saraunas tins @2na9 orem F.hdh sane wbtorataiect as pay wactug Spade whcngevery aooss ere booon.FREL hE whcNg og) &
[acs oye ortpe, em G9 rastaton
[Secondary Winding
lotro png) 9atawad? tas 2 ay rte fSpead te wacgeves¥ ace este BoDDR Wd 8 rane wisoralalectos2¢ pray whdag. FREY ME WUGAg OH Pg)
Primary Winding (Section 2)
lsurtos png 2anawadt ne 2p ote GW 1 ByerE) tom eft ght Os We Maller spread He wMGhgetEA ones eve booby. FEL ME WARGO Pg) 1.
[acs oye ortpe, mG rastaton.
core Assembly
|asembe avcctonn com baue. tm (0.
varnish
pans:
my vem Oo aotuzctam mpesiat
Comments
[7 Use of a grounded flaxband sound the core may improve the EMiperformance:
[2 For non margin wound Vansformers use riple insulated wireTor al secondary windings:
Materials
[rem [Pescrptionwl Core: ETOSA/TTI, NO-2H (Noera] or Equivalent, gappedTor ALG of ST2nAMT™
a Bobbin: Generic, Tpri* 7 ses
a Barrier Tape: Polyester film [1 mil (25 um|base thickness], 20,80 mm wide
ia Varish
a Magnet Wire: 28 AWG, Solderable Double Coated
fs Magnet Wire: 25 AWG, Solderable Double Coated
im Triple Iisulated Wire: 25 AWG
Electrical Test Specifications
[Parameter [Eondivon [Sees
Electical Strength VAC [50 He 1 second, frompins 12945t0 pins 89,10. [2000
[Nominal Primary Inductance, oH Measured = 4 V picpk, typical evitching frequency, between pin 1t0 [169
pin 3, with all other Windings open
FTelerance, 2% [Tolerance of Primary Inductance: Hoo
Maximum Primary Leakage. oA Measured between Pin ito Fin 3, wih all other Windings shorted, [2.39
[Although the design ofthe software considered safety guidelines, it is the user's responsiblity to ensure that the user's power supply design
meets all applicable safety requirements of user's product.
‘The products and applications illustrated herein (including circuits external to the products and transformer construction) may be covered by
cone or more U.S. and foreign patents or potentially by pending U.S. and foreign patent applications assigned to Power integrations. A complete
list of Power Integrations’ patents may be found & waw:powerint.com,