Sunteți pe pagina 1din 6

Technical Data UBP11A parameter module

kVA i

P Hz

2.9

UBP11A parameter module

18028939

2.9.1

Part number 823 933 9

2.9.2

Description Saving data from the inverter to the parameter module Saving data from the parameter module to the inverter Indication of the operating state Meaning of the LED: Green: Data available Flashing green: Data transmission in progress Yellow: No data available Red: Copy error

INFORMATION
The UBP11A parameter module is connected to the FSC11B/12B, FSE24B or FIO11B / FIO21B communication front module. If using UBP11A, you must not additionally connect the MOVITRAC B RS485.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com


System Manual MOVITRAC B

51

kVA i

Technical Data MBG11A speed control module

P Hz
MBG11A speed control module
822 547 8

2.10

2.10.1 Part number

2.10.2 Description The MBG11A speed control module has 2 keys and a display. They allow for remote speed control in the range of 100 % to +100 % nmax (P302). Up to 31 MOVITRAC B units can be controlled at the same time (broadcasting). The MBG11A setpoint control module requires the front module FSC11B/12B or FIO11B.

2.10.3 Dimensions and connection assignment The dimensions are specified in mm (in).

)
28 (1.1) M4
[2] [2]

[1]
56 (2.2) 68 (2.7)

[1]

90 (3 (3.5)

MBG11A

RS+

24V

RS-

[1] Tapped hole on the rear [2] Retaining holes for M4 screws

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

52

System Manual MOVITRAC B

60 ( (2.4) ) 88 (3.5)

) (2.8 70 38 (1. 5

[1]

[1]

186412427

Technical Data UWS11A interface adapter option

kVA i

P Hz

2.10.4 Technical data


Part number Input voltage Current consumption Setpoint resolution Serial interface
1)

822 547 8 DC 24 V 25% About 70 mA 1% RS485 for connecting max. 31 MOVITRAC inverters (max. 200 m, (656 ft), 9600 baud) IP65 15 C to +60 C 90 mm 70 mm 38 mm (3.5 in 2.8 in 1.5 in)

Degree of protection Ambient temperature Dimensions

1) With integrated dynamic terminating resistor

2.11

UWS11A interface adapter option INFORMATION


The FSC11B/12B or FIO11B is required for connecting the UWS11A.

2.11.1 Part number 822 689 X 2.11.2 Description The UWS11A option converts RS232 signals, for example from the PC, into RS485 signals. These RS485 signals can then be routed to the RS485 interface of the MOVITRAC. The UWS11A option requires a DC 24 V voltage supply (Imax = DC 50 mA). 2.11.3 RS232 interface The connection between UWS11A and PC is made using a commercially available serial interface cable (shielded!). 2.11.4 RS485 interface Max. 32 MOVITRAC units can be interconnected for communication [max. line length 200 m (656 ft)] via the RS485 interface of the UWS11A. Do not connect external terminating resistors as dynamic terminating resistors are already installed. Permitted cable cross-section: 1 core per terminal 0.20 2.5 mm2 (AWG 24 - 12) 2 cores per terminal 0.20 1 mm2 (AWG 24 17)

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com


System Manual MOVITRAC B

53

kVA i

Technical Data UWS11A interface adapter option

P Hz

2.11.5 Dimension drawing of UWS11A

X2:RS-232

UWS 5 (0.2) 22.5 (0.88) 83 (3.3) 68 (2.7)

75 (3.0)

1 2 3 4 5

1 2 3 4 5

X1:RS-485

24V RS+ RS-

1454780939 All dimensions in mm (in)

The UWS11A option is mounted on a mounting rail (EN 50022-35 7,5) in the control cabinet. 2.11.6 Technical data

UWS11A Part number Ambient temperature Storage temperature Degree of protection Voltage supply Current consumption Mass Dimensions 822 689 X 0 C to 40 C 25 C to +70 C (according to EN 60721-3-3, class 3K3) IP20 DC 24 V (Imax = 50 mA) max. DC 50 mA 150 g (0.35 lb) 83 mm 75 mm 22.5 mm (3.3 in 3.0 in 0.88 in)

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

54

System Manual MOVITRAC B

Technical Data UWS11A interface adapter option

kVA i

P Hz

Dimension drawing of UWS11A


1 2 3 4 5 1 2 3 4 5

X1:RS-485

24V RS+ RS-

X2:RS-232

UWS 5 (0.2) 22.5 (0.88) 83 (3.3) 68 (2.7)

75 (3.0)

1454780939 All dimensions in mm (in)

The UWS11A option is mounted on a mounting rail (EN 50022-35 7.5) in the control cabinet.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com


System Manual MOVITRAC B

55

kVA i

Technical Data UWS21B interface adapter

P Hz
UWS21B interface adapter INFORMATION
The FSC11B/12B, FSE24B or FIO11B/21B is required for connecting the UWS21B.

2.12

2.12.1 Part number 1820 456 2 2.12.2 Description The UWS21B option converts RS232 signals, for example from the PC, into RS485 signals. These RS485 signals can then be routed to the XT slot of MOVITRAC B. 2.12.3 RS232 interface The connection of UWS21B with PC is made using a standard serial interface cable (shielded). 2.12.4 RS485 interface UWS21B and MOVITRAC B are connected using a serial interface cable with RJ10 connectors. 2.12.5 Scope of delivery The scope of delivery for the UWS21B option includes: UWS21B Serial interface cable with 9-pin sub D socket and 9-pin D-sub connector to connect the UWS21B option to the PC. Serial interface cable with two RJ10 connectors to connect UWS21B and MOVITRAC B. CD-ROM with MOVITOOLS MotionStudio engineering software

2.12.6 Dimension drawing of UWS21B

25 (0.98)

96 (3.8) 90 (3.5)

All dimensions in mm (in)

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

56

System Manual MOVITRAC B

43 (1.7)
1454854283

S-ar putea să vă placă și