Documente Academic
Documente Profesional
Documente Cultură
Description
The Model 750E is a cam-characterized, double acting electronic valve positioner that uses a standard 4-20 mA electronic input signal. It then converts this signal to a pneumatic output to position a control valve actuator. The Model 750E provides precise, controlled positioning for single or double acting actuators. The 750Es rugged shock and vibration resistant construction also ensures accuracy within harsh industrial environments. Moreover, Cam profiles and feedback input shafts allow the Model 750E to be used in a variety of applications where reliable electronic control is required. The Model 750E uses a high-gain, piloted spool valve to load the actuator for positioning in response to electronic input signals. A characterized cam provides mechanical feedback. Cam profiles are available for linear, equal percentage, or quick opening position. A blank profile cam is also available for custom applications. Feedback input shafts are available for rectilinear or rotary action. Rectilinear action can range from 1/2" to 6" in length. All electronic components are securely sealed in an airtight, explosion-proof housing; however, zero and span adjustments are easily accessible for simple calibration and maintenance. Its versatile design and quality construction allow the Model 750E to be used with a variety of actuators. The feedback input shaft and the characterized cam can also be easily replaced in the field to convert the Model 750E from rectilinear or rotary motion. No additional parts or equipment are necessary to change between single or double acting actuators or direct/reverse action. Moreover, the 750Es mounting is identical to that of the Model 750P Pneumatic Valve Positioner, allowing these instruments to be interchanged with a minimum of tubing changes.
5.21
Order No.
750EIIII - IIIII
LLLL
LLLLL
1 1 2 3 4 N 1 2 3 4 5 6 7 N G M N P N S V
Performance Specifications
Repeatability 0.1% of span Linearity 1.0% of span (independent based) Hysteresis 1.0% of span (typical) Dead Spot Less than 0.1% of span Response Level Less than 0.1% of span Open Loop Gain Single Action: 200:1 with locked actuator shaft Double Action: 400:1 with locked actuator shaft
Mechanical Specifications
Enclosure Rating NEMA 4 Weight 7.5 lbs. (3.4 kg) Electrical Approval FM and CSA Intrinsically Safe: Class I, Div. 1, Groups A, B, C & D Class II, Div. 1, Groups E, F, & G Class III, Div. 1 When installed in accordance with Moore drawing 15032-7502, Rev. 2 Entity parameters: Vmax = 40 Vdc Ci = 0 Imax = 150 mA Li = 0.16 mH (750E1) = 0.60 mH (750E2) Explosion Proof: Class I, Div. 1, Groups B, C, D (without terminal enclosure) Class I, Div. 1, Groups C & D (with terminal enclosure) Dust-Ignition Proof: Class II, Div. 1, Groups E, F & G Suitable for: Class I, Div. 2, Groups A, B, C, D Class III, Div. 1 Enclosure Rating: NEMA4 CENELEC/BASEEFA EEx ia IIC T5 IP66 (Tamb = -40 to +82C) Ex N IIC T5 IP66 (Tamb = -40 to +82C)
N R F B
5.22
5.23