Sunteți pe pagina 1din 6

INDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION (PED)

www.tuv.com
Pressure equipment certifcation.
Your key to market access in Europe.
Comply with legal regulations and requirements.
We help you to achieve European certifcation.
The certifcation process
As a manufacturer, you have many responsibilities and details to consider
during the planning and production of pressure equipment. These include
compliance with safety requirements, such as:
Analyses of hazards
Material selection
Calculations for capacity, security and operation
Manufacturing process (especially welding processes)
CE marking
Instruction manuals
For certain processes, you need to have qualifed personnel and appropriate
procedures in place and execute the work accordingly. These include:
Tracebility of materials
Component preparation
Permanent joint
Heat treatment
Pressure test
Final assessment
As a Notifed Body, we can review and certify all these elements and
procedures. We can support you through the whole process to meet the
applicable requirements. Moreover, as an independent inspection agency, we
provide you with the required personnel qualifcations.
Design and planning phase
Support in the approval process, according to national
and international regulations for worldwide markets
Risk assessment and safety evaluation
Review of the design proposal and strength calculations
Calculations and analyses, including the fnite elements
method (FEM)
Design verifcation
Manufacturing phase
Review, approval and inspection of materials and their
production process
Procedure processes - parameter identifcation, feasibility
and usability
Certifcation of welders
Certifcation of non-destructive testing (NDT) personnel
Testing of pre-products, components, products and
assemblies
Certifcation of quality assurance (QA) system
Support in welding and materials technology
We can support you along the planning and manufacturing process - starting with
material testing at material manufacturers sites, followed by inspection services during
manufacturing and fnally certifcation of the fnished product.
Modules for category II
Manufacturer Manufacturer Notifed Body Manufacturer
Modules for category I
Manufacturer Manufacturer Manufacturer
According to the risk category of the product, you can choose a combination of different modules
to comply with the PED enabling you to use the CE marking.
Module A1
Internal production
control
Monitoring of the
fnal assessment
Module E1
Module D1
Production quality
assurance (without design)
Operating
instructions
CE marking
Declaration of
conformity
Hazard
analysis
Technical
documentation
Production quality assurance
(fnal assessment)
Internal production control
Operating
instructions
CE marking
Declaration of
conformity
Hazard
analysis
Technical
documentation
To help you expand into the global market, we certify your pressure equipment in compliance with European legislation -
and with a wide range of national regulations. We support you with:
A general understanding of the Pressure Equipment
Directive (PED) and other related directives.
Understanding the concept of CE marking.
Recognizing equipment that falls under the directive.
Understanding conformity assessment procedures.
Determining the risk category of particular pressure
equipment.
Drawing up a Declaration of Conformity.
Creating a technical fle.
Modules for category IV
Manufacturer Notifed Body Notifed Body Manufacturer
Modules for category III
Manufacturer Notifed Body Notifed Body Manufacturer
Module D
EC design-
examination
Production quality assurance
(without design)
Module F
Product verifcation
Module B1
EC design-
examination
Module B1
Module E
Production quality assurance
(fnal assessment)
EC type-
examination
Module B
Module C1
Operating
instructions
CE marking
Declaration of
conformity
Hazard
analysis
Technical
documentation
Conformity to type
EC type-
examination
Module B
Full quality assurance (with design)
Module H
Module D Module B
Module F Module B
Module H1
Module G
EC Type-
examination
Production quality assurance
(without design)
Product verifcation
EC Type-
examination
Full quality assurance (with design) + design examination +
special surveillance of the fnal assessment
EC unit verifcation
(design verifcation + product verifcation)
Operating
instructions
CE marking
Declaration of
conformity
Hazard
analysis
Technical
documentation
Offering you the experience you need to gain
access to your target market.
Your benefts - Why TV Rheinland?
Based on our worldwide presence and our comprehensive international accreditations, we meet the requirements of clients
across the globe. We can help you:
Achieve the prerequisites for exporting your products abroad
Beneft from our extensive knowledge of the similarities and differences between worldwide pressure equipment
regulations down to the smallest detail
Take advantage of our experts many years of experience and industrial knowledge
Communicate with a local contact with an international background and network, and meet the expectations of your
target markets
PED is a guideline for the design and manufacture of pressure equipment
covering pressure vessels, heat exchangers, steam boilers, pipelines, storage
tanks, pressure relief devices, valves, regulators and other pressure equipment
with a maximum allowable pressure greater than 0.5 bar.
With over 140 years of experience in inspection and certifcation of boilers and
pressure equipment, we offer you highly specialized expertise and industry
knowledge to help you meet all the requirements of your target market.
We can help you with any kind of pressure equipment, starting with material
testing at the manufacturers site, followed by inspection services during
manufacturing and fnally certifcation of the product. For the European
market, boiler and pressure equipment must be certifed by an independent
Notifed Body to ensure compliance with all regulations.
We are a Notifed Body for PED all across Europe and have a comprehensive
range of international accreditations, offering a single point of contact for
global market access.
As a manufacturer of pressure equipment or related components, you must certify your
products according to the European Pressure Equipment Directive (PED) 97/23/EC if you
want to sell them in Europe.
European regulations
Harmonized norms:
EN 12952, EN 12953: steam boiler
EN 13445: pressure vessel
EN 13480: pipelines
European country regulations:
Germany: AD 2000
United Kingdom: PD 5500 (BS 5500)
France: CODAP 2000
Other
TUVdotCOM. The noticeable difference.
I
D
:
0
0
0000
0
8
8
8
I
D
:
0
0
0000
0
8
8
8
I
D
:
0
0
0000
0
8
8
8

The Internet platform TUVdotCOM makes the difference visible: with all the products, services,
companies, systems and personnel that are tested by TV Rheinland, optimally documented and
accessible from all over the world.

V
,

T
U
E
V

a
n
d

T
U
V

a
r
e

r
e
g
i
s
t
e
r
e
d

t
r
a
d
e
m
a
r
k
s
.

T
h
e
i
r

u
s
e

w
i
l
l

r
e
q
u
i
r
e

p
r
i
o
r

c
o
n
s
e
n
t
.
TV Rheinland Group
Industrial Services
industrial-services@tuv.com
www.tuv.com

S-ar putea să vă placă și