75%(4)75% au considerat acest document util (4 voturi)
4K vizualizări8 pagini
This document provides instructions for connecting a laptop to a delta rectifier, installing load files on the rectifier from the laptop, modifying customer settings on the rectifier, and generating a low voltage alarm on the rectifier. The steps include logging into the rectifier at an IP address, browsing and selecting a load file to install, entering site and system name settings, and changing the system voltage supervision setting to generate an alarm.
This document provides instructions for connecting a laptop to a delta rectifier, installing load files on the rectifier from the laptop, modifying customer settings on the rectifier, and generating a low voltage alarm on the rectifier. The steps include logging into the rectifier at an IP address, browsing and selecting a load file to install, entering site and system name settings, and changing the system voltage supervision setting to generate an alarm.
This document provides instructions for connecting a laptop to a delta rectifier, installing load files on the rectifier from the laptop, modifying customer settings on the rectifier, and generating a low voltage alarm on the rectifier. The steps include logging into the rectifier at an IP address, browsing and selecting a load file to install, entering site and system name settings, and changing the system voltage supervision setting to generate an alarm.
Local Area Settings For Connectivity b/w Rectifier & Laptop
Login IP : 192.168.100.100, Username : maintenance Password: psc3
Load File installaion steps 1. Home 2. System 3. Filemanager 4. Select File Type (Setup) 5. Click Load File from PC
A new window will appear Click Browse Select desired Loadfile Click Start
Click Home Click System..Click Customer Settings Enter Site Name.System Name Click Accept ChangesClick Save to get the modified settings saved
Click Home.Click Maintenance.Click Extras..Click Reboot PSC 3 A notification window will appear Are you sure you want to reboot PSC 3 Click OK to reboot
Steps to Generate the Low Voltage Alarm Click Home.Click Battery..Click Control.Click System Voltage Supervision Change Ua min to 55 Click Accept Changes to Generate Low Voltage Alarm