Documente Academic
Documente Profesional
Documente Cultură
Pressure-Core
7.54
[191.5]
1.53
[38.9]
Notes
1. Approximate valve weight: 5.7 lb [2.6 kg].
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.53 maximum.
2. Meets the requirements of NACE MR0175/
ISO 15156-3.
Standard Materials
Valve ASTM A479-316 SS
Body & Bonnet ASTM A479-316 SS
Stem ASTM A479-316 SS
Soft Seat (Std) Delrin
Cone
Pressure and Temperature Ratings
Valve Packing Chart on Page 5
Standard Manifolds
316 SS
Teflon
Pressure-Core
6,000 psig @ 200 F [414 barg @ 93 C] Chart D
Ratings
FIVE-VALVE DIFFERENTIAL PRESSURE MANIFOLD: M-675
2
All rights reserved. Copyright 2010, Yokogawa Electric Corporation. Subject to change without notice. GS 22B01C53-01EN-A August 2010
Manifold Mounting Bracket Shown on Page 5.
Soft Seat Design: Dimensions, inches [mm]
Flange x Flange
Dimensions, inches [mm]
Max Open A B
Teflon
Pressure-Core
7.54
[191.5]
1.53
[38.9]
Notes
1. Approximate valve weight: 5.7 lb [2.6 kg].
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.53 maximum.
2. Meets the requirements of NACE MR0175/
ISO 15156-3.
Standard Materials
Valve ASTM A479-316 SS
Body & Bonnet ASTM A479-316 SS
Stem ASTM A479-316 SS
Soft Seat (Std) Delrin
Cone
FIVE-VALVE DIFFERENTIAL PRESSURE MANIFOLD: M-775
3
All rights reserved. Copyright 2010, Yokogawa Electric Corporation. Subject to change without notice. GS 22B01C53-01EN-A August 2010
Manifold Mounting Bracket Shown on Page 5.
Pressure and Temperature Ratings
Valve Packing Chart on Page 5
Standard Manifolds
316 SS
Teflon
Pressure-Core
6,000 psig @ 200 F [414 barg @ 93 C] Chart D
Ratings
Standard Materials
Valve ASTM A479-316 SS
Body & Bonnet ASTM A479-316 SS
Stem ASTM A479-316 SS
Hard Seat (Std) Carbide Ball
Pressure and Temperature Ratings
Valve Packing Chart on Page 5
Standard Manifolds
316 SS
Teflon
Pressure-Core
10,000 psig @ 200 F
8,000 psig @ 450 F
[689 barg @ 93 C]
[552 barg @ 232 C]
Chart A
316 SS
Low-Torque
Grafoil
Packed
6,000 psig @ 200 F
1,500 psig @ 1,000 F
[414 barg @ 93 C]
[103 barg @ 538 C]
Chart B
Ratings
Dimensions, inches [mm]
Max Open A B
Teflon
Pressure-Core
7.13
[181]
1.94
[49.2]
Low-Torque Grafoil
Packed
8.18
[207.6]
2.40
[61]
Notes
1. Approximate valve weight: 5.7 lb [2.6 kg].
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.
2. Meets the requirements of NACE MR0175/
ISO 15156-3.
Hard Seat Design: Dimensions, inches [mm]
1/2" FNPT x Instrument Flange
FIVE-VALVE DIFFERENTIAL PRESSURE MANIFOLD: M-678
4
All rights reserved. Copyright 2010, Yokogawa Electric Corporation. Subject to change without notice. GS 22B01C53-01EN-A August 2010
Manifold Mounting Bracket Shown on Page 5.
5
All rights reserved. Copyright 2010, Yokogawa Electric Corporation. Subject to change without notice. GS 22B01C53-01EN-A August 2010
NOTES:
Monel
is a registered
trademark of International
Nickel Company.
Hastelloy
is a registered
trademark of Haynes
International Inc.
Delrin
, Viton
, Tefzel
and Teflon
are registered
trademarks of the E.I. du
Pont de Nemours and
Company.
Grafoil
is a registered
trademark of Union
Carbide Corporation.
PEEK
is a registered
trademark of Victrex PLC.
Kel-F
is a registered
trademark of the 3M
Company.
Bracket Option Codes:
VCH - Carbon Steel
VSH - Stainless Steel
MANIFOLD MOUNTING BRACKETS
PRESSURE and TEMPERATURE CHARTS
M675
Body Style
S
M675 Five Valve (Soft Seat)
M775 Five Valve (Soft Seat)
M678 Five Valve (Hard Seat)
Body Code
D
Seat Code
Hard:
C Carbide Ball
T
Stem Seal Code
T Teflon
Pressure-Core
G Grafoil
Packed (Low-Torque
TM
) Not Available on M-675/775 Soft Seats
Option Codes
/MT
Ordering Information
/ATCH Attached to Transmitter Hand Tight
/HTAS*
1
Attached and Pressure Tested per ANSI B16.5
/TAPT*
2
Torqued Attachment and Pressure Test
/VCH Carbon Steel Mounting Bracket
/VSH Stainless Steel Mounting Bracket
/XL Oxygen Cleaning
/W9 316 SS Bolts and Washers
Soft:
D Delrin
S A479-316 Stainless Steel
(Meets NACE MR0175/ISO 15156-3)
/XL
Flange Seal Standard
/MT Taylor Mount Flange Seals (Required for Teflon
)
/MT1 Taylor Mount Flange Seals (Required for Grafoil
)
FIVE-VALVE DIFFERENTIAL PRESSURE MANIFOLDS
All rights reserved. Copyright 2010, Yokogawa Electric Corporation. Subject to change without notice. GS 22B01C53-01EN-A August 2010
NOTE: For other body materials, consult factory.
*
1
= Hydrostatic leak tested in accordance with ANSI B16.5, to 1.5 MWP of transmitter for 1 minute.
*
2
= Nitrogen leak tested to transmitter or manifold MWP, whichever is less, for 10 minutes.
For MWPs over 3600 psi, Hydrostatic leak test method is applied.
6