0 evaluări0% au considerat acest document util (0 voturi)
162 vizualizări90 pagini
SHFRA MULTI ACTIVITIES Co. Ltd is a national Sudanese company working in import and export, general trading, general services. We are authentic services and techniques providers in Sudan from international research institutes and companies such as from Ukraine and Russia. Our team includes unparalleled experts from diverse SYESTEMS as expected.
SHFRA MULTI ACTIVITIES Co. Ltd is a national Sudanese company working in import and export, general trading, general services. We are authentic services and techniques providers in Sudan from international research institutes and companies such as from Ukraine and Russia. Our team includes unparalleled experts from diverse SYESTEMS as expected.
SHFRA MULTI ACTIVITIES Co. Ltd is a national Sudanese company working in import and export, general trading, general services. We are authentic services and techniques providers in Sudan from international research institutes and companies such as from Ukraine and Russia. Our team includes unparalleled experts from diverse SYESTEMS as expected.
Subjects: Introduction: General Information. Overcoming Obstacles. SHFRAs mission. Scope of business: 1. Remote Sensing Imagery (R.S.I.). 2. Autonomous drilling units (ABBA). 3. Water shut-off with using AKRON-RK composition. 4. DFM. 5. The Plasma Generator of Elastic Pulses (PGEP). 6. Technological Solutions for Efficient, Highly Profitable and Environmentally Safe Mini Oil Refinery. 7. Supply of equipment for oil and gas industry.
SHFRAs License and registration. Certifications.
3 | P a g e
Introduction: SHFRA MULTI ACTIVITIES Co. is a national Sudanese company working in import and export, general trading, general services, provides state-of-the-art and flawlessly engineering consultancies and techniques in a lot of different areas, such as petroleum and mining. SHFRA MULTI ACTIVITIES Co. Ltd strives for technical excellence and aims to exceed client imaginations. At our company, we aim to have a permanent regional influence. Our team includes unparalleled experts from diverse SYESTEMS as expected. As stated above, SHFRA MULTI ACTIVITIES Co. Ltd is targeting to supply pioneer services for different sub surfaces exploration. We are authentic services and techniques providers in Sudan from international research institutes and companies such as from Ukraine and Russia.
General Information: Primary contact for sales/client Services: Hussein Yousif Hussein +249 999899986 Office Tel: +249 157907252 Address: Khartoum, Sudan. Flat No 3. Building N 612, block 4, Hay Alsafa. E-mail: hussein39@gmail.com khiderhashim@gmail.com Website: YouTube Channel: www.shfra.com www.youtube.com/user/SHFRAcontact Facebook: www.facebook.com/shfra.co Year established: May 2011 Type of organization: Private company Type of Business Retailer. Authorized Agent. Consulting Company. In-house working language(s) English. Arabic. Russian. Ukraine.
Overcoming Obstacles: Sudan is facing many challenges in this era after the separation of the south, so to progress we should support our self with effective technologies. In addition, establishing a strong infrastructure for future generations. SHFRAs vision (God willing) will cover in this decade the majority of the Middle East region. Hence targeting to sustain the Oil, Gas, Mining and Energy Industries in Sudan by utilizing advanced technologies to optimize the sustainable recovery, production, transportation and processing the perused resources.
4 | P a g e
SHFRAs mission: SHFRA is committed to provide international solutions to our clients. SHFRA will keep delivering engineering and management consultancy where policies, technology, business systems and people are combined in sustainable change for the society. The truth to be known, our slogan is All that glitters is not gold.
Scope of business: Our main target of the companies work is in the areas of Petroleum industry.
Truth be known, the following services & products are some of SHFRA's activities, for more services & products in different business sections such in mining, modern technologies and IT don't hesitate to contact us.
Please Note: Contact us for more information on the following subjects.
1. Remote Sensing Imagery (RSI).
Introduction: This technology has been developed by Moscow Lomonosov State University and some former-USSR military institutions.
Our key approach is to use many heterogeneous satellite data sources as possible, including optical (multi- and hyper-spectral), thermal, radiometric, magnetic, and gravity data. We rely on our recent experience of processing (ERS) with advanced mathematical methods which implemented in hardware-software systems.
Used satellites: 1. American satellites: USA Terra/Modis Terra Aster Earth/Aster The NASA's Landsat 7 & 8 Terra/ASTER satellite
In addition we are actively using the hyper-spectral received data from NASA's Earth Observing-1 satellite which carries two unique sensors: Hyperion (220 spectral bands). ALI (Advanced Land Imager).
2. Russian satellites: Resource DK-1 Meteor-3M Conobus B
3. European satellites belong to European Space Agency (ESA). We have an access to receive data, from the modern European satellites and sensors including: GOCE (gravity). Proba (CHRIS, Compact High Resolution Imaging Spectrometer). ENVISAT (ASAR, Advanced Synthetic Aperture Radar), and others.
5 | P a g e
4. We also work with CBERS (China-Brazil Earth Resources Satellite) program. CCD/High Resolution CCD Cameras. IRMSS/Infra-Red Multispectral Scanner. WFI/Wide Field Imager.
Work plan: The work will be conducted in three stages: Stage I: Reconnaissance and Pre-processing. Stage II: Spatial analysis. Stage III: Detailed analysis.
Our technique capabilities: This technique includes the following (non exhaustive) list of capabilities: Hydrocarbon exploration (Crude Oil & Natural gas) Mineral exploration Sand and gravel (aggregate) exploration / exploitation Structural mapping Geo-hazard mapping Surficial deposit / bedrock mapping Lithological mapping Environmental geology Baseline infrastructure Sedimentation mapping and monitoring Event mapping and monitoring.
Benefits: The obtained information from remote sensing analysis data from space allows a new level of optimal decision-making and government regional coordination. Obtaining geological information for pursued objects and minerals, in resolution ranging from 50 cm and 7000 m depth! Study can be subjected to any point in the world, including hard and dangerous regions. Performed without site-visit, field work, expeditions, additional resources, etc. The scale of one research image can reach and cover tens of thousands square kilometres. (1:6000 - 1:15000). Regional dynamics study capability due to multi-temporal images. The required time to obtain pursed data can be several hours since decision making for approved work. Economical attractive comparing to conventional methods, the sum cost of 1-2 orders is lower than traditional methods of investigation.
6 | P a g e
The final report includes: Description of the scheme and map products with their interpretation included in the project. Schemes, maps boundaries showing and the preliminary assessments to the target territorys natural reserves. Prognostic large-scale maps shows the structures characteristics with probable deposits (locations, volume and depth) charted with recommended locations for seismic stations and boreholes. Description of other geological and structural characteristics within the territory. Special attention is taken concerning to the geophysical anomalies including the faults impact, geo-pathogens, local seismicity and geochemical deviations. Quality Control Report.
Literature Cited / References: License of Rosaviakosmos for space activities 186 License European Space Agency ESA 61154
7 | P a g e
2. Autonomous drilling units (ABBA):
Introduction: This super-high-speed drilling apparatus is for drilling and repairing water and oil wells in many circumstances, as well as vertical, curvilinear well pad, horizontal and bottom-up. This ultrafast drilling technology is developed and protected by our research Engineers patents. This technology radically differs from all present techniques. Notably, it is based on the jet movement principle, which used in ABBA design and creation.
This technology was tested during construction , water wells drilling, power transmission poles installation, in puncture horizontal devices under railways and roads and flawlessly in Blowout Preventer and shelf drilling on North and Azov Seas.
The overall dimensions and specifications:
Lengths vary from 0.5 to 16 m. Diameter from 80 to 1400 mm and more. Passable diameter wells and mines from 85 to 1400 mm and more. Device weight from 0.1 to 12 tones. The working staff 2-4 workers. Fuels can be liquid, solid or compressed gas. Drilling speed (variable depending on the technical task) and is:
In sediments from 0.1 to 4.7 m / s. In the rocks from 30 to 60 m / h.
In practice, carried out an experimental penetrant structure diameter of 2600 mm and 4200 mm, it is theoretically possible to increase the penetration diameter to 6000 mm or more, while maintaining the same speed drilling. Drilled to1620 meters depth in 8 hours! The drilling depth theoretically unlimited. The maximum penetration depth in sediment formation by single fuel filling is about 400-450m. Full ABBA wear achieved after 30 000 - 35 000 meters penetration. In addition, the drilling head is to be replaced every 6000 - 7000 meters.
8 | P a g e
Illustrators:
The scope of the new drilling technology (non exhaustive):
Drilling in oil, gas and water wells. Blasting drilling holes. Recovery of blocked, clogged paraffin embedded wells. Drilling of exploration wells. Penetrate horizontal and curved workings structure. Working excavate from bottom to up. Ability to drill wide diameter wells. Development of geothermal energy. Extinguishing fires in the oil and gas fields. Construction of pier foundation, caissons, well and drilled piles. Underwater and offshore drilling. Construct the mine rescue and ventilation shafts. Shelter from formations gas blows.
9 | P a g e
ABBA can be used on conventional drilling rigs with no need to making major or sophisticated changes in the installation process of casing, operating equipment and armature.
The advantage of this drilling method is the handiness mobility: ABBA attached with auxiliary equipment, which can be placed on off-road vehicle or transported by helicopter for hardly unreached areas.
This Unparalleled technology has no comparison around the world's drilling equipment manufacturers.
10 | P a g e
Our Partner experiences: In Republic of Iraq:
In Islamic Republic of Iran:
Courtesy visit in Republic of Sudan:
11 | P a g e
3. Water shut-off with using AKRON-RK composition:
Introduction: Our state-of-the-art Water shut-off technique is different from any conventional well treating technologies of those applied by Oil companies. More precisely, we offer the use of special chemical product AKRON-RK in order to increase the crude oil production for the largest possible period.
Aims: This technology aimed to water confinement and water flow prevention so as to reduce the WC% without reducing the oil production.
Characteristics: AKRON-RK is very mobile and easy filtering liquid. But usually use water-filled composition, which has viscosity from 2 to 20 mPa.s, similar to formation water viscosity. Besides its capability to work under the influence of any type of water of any salinity.
General characteristics: Physical state: Liquid of yellow and brown, dark-brown colour Dynamic viscosity at 20 C: 10-150 mPa.s Density at 20 C: 1000-1100 kg/m Boiling temperature: near 150 C Freezing temperature: lower -55 C
Geological conditions: Reservoir type: Anyone Water rate: 15-100 % Reservoir temperature: 20-250 C Carbonate content of reservoir: Anyone Type of water and salinity: Anyone
Case studies: From authentic case studies in more than 2000 wells, this technique achieved the following service operations: Reducing the water cut WC%. Elimination of fluids flow in between different formations layers behind the casing. Repairing the casing leakage. Increasing the oil production (150 -300% production increase). Casing cementing with the use of new materials (new oil wells and used oil wells).
12 | P a g e
4. Technology of Acoustic Influence for Production Optimization of Oil, Gas and Water Wells. (DFM):
Introduction: The most progressive method (the acoustic method) has been used to create the DFM- technology i.e. technology of acoustic influence on the productive strata. This technology use the ultrasound, which is irradiated by specially developed piezoceramics.
The DFM-technology allows increasing production in several times (30-300 percent) for oil, gas and water wells. It is made through breaking up the clogged strata zones and the ones with poor permeability. The DFM is based on using the MF ultrasound pulses. It is covered by patents of Russia and Ukraine and is characterized by absolute ecological safety, high effectiveness and low power inputs.
Production will increases for a long time, depending on the geological and production characteristics of strata.
13 | P a g e
COMPARISON OF TECHNOLOGIES: DFM ultrasound
Chemical
Hydraulic Condition of oil production while execution of well cleanup works stopped only for a short time stoppage of oil production, work of well stoppage of oil production, work of well Increase of oil production 30-300% 15-50% up to 50% Well cleanup works duration 2-3 days Up to 1 month 5-7 days Environmental safety safe harmful harmful Guarantee and effectiveness high medium low Works safety level high medium low Manpower resources 2 persons 2-3 persons 3-4 persons Energy consumption low low high Influence upon the equipment, structure of layers does not influence causes the corrosion of the equipment causes crevice appearance in the equipment, deformation of layers
ADVANTAGES: Increased acoustic power. Simplified service maintenance of the generator. The generator is overvoltage and temperature resistant. No vacuum in a zone of enhancement. Guaranteed increase of production resource of the radiator. Smaller dimensions. Lower electricity consumption.
14 | P a g e
Local case studies in water wells: We are belonging to the Water Authority of the state of Khartoum, and DAL Engineering lLS Company.
Well name before g/h After g/h Increasing of productivity % Fetemab 1200 3200 166.6 Sawrah 41 2000 6000 200 Sawrah 40 100 700 600 Sawrah 18 1200 5800 383.3 Sawrah 97 1500 3000 100 Nile city 1000 3000 200 Dal 1200 5800 383.3 Um-derawah 2500 5000 100
15 | P a g e
5. The Plasma Generator of Elastic Pulses (PGEP):
Introduction: Our experienced company provides signally the unorthodox technique for both production and injection wells; the Plasma Generator of Elastic Pulses (PGEP). In all cases, used to increase the well productivity by improving the productive properties of bottom zone filtration.
Due to the collapse pulses impact, new cracks will be formed which can often increase the volume of gas content of formation fluids. The proposed treatment method is an innovative environmentally sound technology.
Advantages: The one well treatment takes 6 hours maximum. Jump to advantages, the PGEP avoid the geophysicists assignment as well as bringing the well into an action after the work performed immediately. On this basis decrease the water-cut WC%. The bringing down of the perforation discharge unit into targeted zone is uncalled-for. Besides removing the submersible equipment can be used for both operating and shut down process for scheduled work over. It is worth mentioning, there is no parallel or analogues as for our unique technique, equipments and method in the oil area all over the world.
This treatment combines the advantages of the existing following treatments: Acoustic treatment of wells technology. Electro hydraulic treatment of wells technology. Nitrogen pulse treatment. Vibrated wave action on production strata. Gas dynamic strata fracturing.
Illustrator: The full range of equipment is installed on the base of terrain vehicle class GAZ-66
16 | P a g e
Reference: Speaking of which, this technique correspond to Kyoto Protocol; Article 2 (paragraph 1.-A-iv) under the name an innovative environmentally friendly technology.
17 | P a g e
6. Technological Solutions for Efficient, Highly Profitable and Environmentally Safe Mini Oil Refinery:
Introduction: Traditionally small refineries are not capable to provide deep crude oil processing and produce high quality motor fuels. It is concerned with high CAPEX and OPEX cost due to complexity of the technological equipment and processes. Such equipment like reforming and isomerization units usually installed at oil refinery plants with capacity 1 million tons annually and more.
For the reasons above a traditional mini oil refinery plant consists of basic units which produce straight-run nafta, high sulphur content diesel fuel and fuel oil (or mazut). In such configuration those plants can produce from 50 to 65% at maximum light fractions and huge amount of heavy fractions.
Oil refining issues: Heavy and extra heavy crude oil as feedstock High sulfur content Strict environmental requirements High quality petroleum products demand Distributed oil fields and wells
Our solution Benefits: High quality fuels production according to Euro-4-5. Heavy crude oil refining. 100% of feedstock processing. Autonomous and energy independent units. Turn-key supply. Modular design with scaling up possibility. Multi-feedstock design.
Advantages:
These superior solutions provide the following key benefits:
Deep Crude Oil Processing Our technologies allow the achievement of over 90% refining depth, producing high quality motor fuels according to strict European standards. Our mini oil refining facilities produce high quality final products, not just low quality middle products like what all others do. Moreover, we can generate our own electricity for production needs by recycling of heavy residues simultaneously.
Heavy and Extra Heavy Crude Oil Processing Instead of most of the traditional solutions from European and American suppliers, our equipment can process heavy and extra heavy crude oils with high sulfur content. Anton Potapov provides a possibility to produce high quality products with significant added value from difficult refining feedstock.
18 | P a g e
Euro-4 and Euro-5 Compliant Our mini refineries allow production of high quality motor fuels according to Euro-4 and Euro-5 standards. It completely redefines traditional practice of mini oil refineries operations and brings your business up to new level. You will produce highly profitable products with minimum residues amount.
Completely Environmentally Safe Special attention in our projects is focused on environmental issues. We design and construct eco-friendly facilities which correspond with strict environmental regulations.
Low OPEX and Energy Consumption Our technological processes are designed in such way that we achieve significant energy effectiveness of petroleum products manufacturing. In comparison with American well-know UOP solution our isomerization process is 2 times cheaper, 5 times less energy intensive and 6 time less space needed. It considerably decreases crude oil processing cost.
Comparing between American's and Russian's designs, in term of size and complexities:
American's design Russian's design
Different Types of Design Our refining equipment can be manufactured either in vertical or in horizontal positioning thanks to specially developed process of primary crude oil refining. It makes possible to construct units in mobile version.
Our partner's experience: Our partner the Hood River Suomi Oy has vast experience in design and construction of different kind of crude oil and petrochemical facilities. Currently one of the HRS Holding companies signed contract with Indian Oil for industrial scale facility construction for Euro-5 quality fuels production. Also we are involved in Russian Government project for design and construction of two oil refineries 3 million tons per year and 2 million tons per year capacity. In our work we use the best business practices and cutting-edge technologies which make our projects ultimately effective and highly profitable for our esteemed customers and partners.
19 | P a g e
Illustrators:
20 | P a g e
7. Supply of equipment for oil and gas industry:
Offering New Services: Gentlemen, we have the pleasure to inform you that we have been obtained a new services and products in petroleum equipment with the cooperative of the VMZ-trading Co Ltd, registered in St. Petersburg, Russia. We SHFRA multi activities Co, Ltd will be connected with all kind of products as Exclusive Dealer. Our company will be supplied with a sufficient variety and quantity of equipment and we guarantee that any orders with which you may favor will be executed with full satisfaction.
Our partner: VMZ-TRADING Co Ltd registered in St. Petersburg in 2011 by private individuals to major international projects. The company is a successor ST "Apogee." The company has successfully worked in Russia since 1991 were the founders of the individuals and the International Red Cross. The main activities included: construction, trade, humanitarian aid, food supplies in the LO and consulting services. Over the years organized many business meetings at the highest level between representatives of leading companies and government agencies of Russia, Sudan, Iran, United Arab Emirates, Germany, carried out several scientific conferences on the problems of oil and gas industry. Currently, VMZ- trading specializes in the provision of services (repair of wells and the intensification of production), as well as the development of new technologies, materials and equipment for oil and gas industry. One of the main activities of the company are improving technologies for enhanced oil recovery, overhaul of wells, introduction of modern, high-performance materials and equipment Cooperation with reputable scientific and industrial centers can adapt as quickly as possible technologies and equipment for geological and technical conditions of the regions in which they are applied.
Proposed Services: We SHFRA multi activities Co, Ltd offer the following products, some of them based on domestic market demands: Water isolation and repair of wells. Supply of equipment for oil and gas industry. Supply of pumps, turbines, automatic pumping stations. Supply of telecommunications equipment. Delivery of rolled metal. Consulting.
In addition, the following tools aren't cover all the available equipment & services of our partner.
21 | P a g e
Proposed Equipment: 1. Wellhead equipment 2. Drilling equipment 3. Fishing Tools: a. Detachable overshot: b. Overshot 4. Well service equipment (CUTTER): 5. Construction and wells repair equipment 6. Equipment and appliances for pipes fitting: a. EJECTOR b. Shaped FIXTURES 7. Adapters: 8. Pneumo-hydraulic installation and stands 9. Process equipment 10. Lubricator wire 11. Threading tools 12. Device for changing the pressure valve 13. A SPOT PREVENTER 14. Manifold 15. REPAIR PLASHECHNOGO PREVENTER
16. The control station blowout preventer
17. Universal annular preventer 18. UNIVERSAL ROTARY PREVENTER 19. ELEVATOR 20. SPIDER-ELEVATOR 21. Spider and Spider-elevator 22. A set of equipment for gas-lift method for oil extraction 23. COMPLEX "BARRIER 6M"
24. The deep safety shutoff valve with independent drive type CPC-73 43 25. EQUIPMENT TO ISOLATE THE ANNULUS 26. COMPLETE SYSTEM "BARRIER 6ORE" for the simultaneous production of the well two-tank 27. Submersible MAINTENANCE EQUIPMENT OR-168 28. PACKER 29. Tools of operation intervention 30. Universal Packer 31. BALL VALVE 32. Check valve 33. Control valve RC-400 34. CRANE MOUTH 35. GATE VALVE 36. Hydraulic throttle (Hydraulic chokes)
37. SAFETY VALVE 38. Valve with damping device 39. VALVE WITH TWO SYSTEMS OF CONTROL AND MANOMEROM 40. GATE VALVE (WEDGE GATE)
22 | P a g e
Wellhead equipment Wellhead equipment for operational VYSOKODEBETNYH GAS WELL
1 - Casing head, 2 - head tube, 3 - adapter, 4 - valve ZMS-150h210 K1, 5 - Catch ZMS80h21 K1, 6 - catch ZMS-100h21 K1, 7 - The union of the corner of DR-100h21 K1, 8 - Check valve OK 100h21-K1, 9 - matanolnaya line.
Designed for operation and maintenance of gas wells, including in underground gas storages.
Design features: Replacement of all components and elements christmas tree, pipe holder without first squeezing well. Making all kinds of well work through the tubing, and the descent (ascent) without first squeezing well. Automatic Emergency overlap pipe duct tubing in case of destruction christmas tree.
Specifications: Naimenoanie parameter: Parameter value: Working pressure, MPa 21 The diameter of the tubing, mm 168 Working Environment Gas containing a small amount of gas condensate and produced water Operating temperature, Celsius 80
23 | P a g e
COMPLEX wellhead equipment for the underground gas storage: Designed for roping casing, pinning (suspension) of the upper end of the intermediate casing, the main casing and hanging columns at the mouth of the well during the construction and operation of underground storage tanks in the rock salt. The complex includes a construction kit and a set of operational equipment. The main indicators of the level of technical equipment meet the requirements of the standard edition of API 6A PSL2, PR1.
Specifications: Undergirding the number of columns, pieces. 5 Working pressure, MPa 21 Diameter, bind columns, mm (inches): - directing 530 (20 7/8") - Intermediate casing 377 (14 27/32") - The main casing 299 (11 3/4") - External Suspension 219 (8 5/8") - Central pendant 146 (5 3/4") Type of pipe holder klinevoy The load on the pipe holder for pipes, kN: - 377 mm 1290 - 299 mm 1165 - 219 mm 878 - 146 mm 1360 valving direct-flow valve with the seal of the seal "metal-metal" The control system valves manual Control valves adjustable choke The control system throttles manual Management effort, kN 0.45 Average service life, years 15
24 | P a g e
OPERATING MODE
25 | P a g e
Drilling equipment STAGE TURBINE FOR TYPE turbo drills A9-GSHT and TPX-240
Designed to create a torque shaft turbo drill. Turbine stages are installed in the upper sections of two turbo drills by 90 sets of each section. The tests of turbine stages have shown their high resistance to abrasion, as well as a good balance, thus increasing the service life by 20%. These tests were conducted at the Gubkin deposit where drilling fluid contains utyazhlitel that increases abrasion.
Technical characteristics:
9- -240 P input 13-17 10-16 P O 6-11 5-11 Fluid flow in l / s. 42 32 Operating temperature, Celsius 120 100 Rotation Speed rev / min 250 340 material Steel SB7Si-1 Steel SB7Si-1 Number of blades: nozzle 38 30 Impeller 38 30 Overall dimensions, mm nozzle 124 204, 5 x 52 132204, 5x 50.1 Impeller 110190 x 52 110190 x 50.1 26 | P a g e
Fishing Tools Detachable overshot:
Apply for full or partial withdrawal of the casing pipe remaining in the well by accident (bummer, fall, etc.)
The service life (number of seizures) Overshot - 36 Collet - 9
Technical characteristics: Type: TVOP-73 TVOP-72L TVOP-89 TVOP-89L Nominal diameter of the grip tube, mm: 73 73 89 89 The range of bore caught pipes, mm: 59-63 59-63 74-77 74-77 The maximum axial load, kN: 500 500 700 700 Plunger diameter, mm: Closed: 57 57 71 71 In the open condition: 69 69 83 83 Overall dimensions, mm: Diameter (adapter): 95 95 95 95 length: 1190 1190 1300 1300
28 | P a g e
Well service equipment (CUTTER):
Universal cutter down hole face cutter. Cutting type - the type of abrasive cutting - abrasive
Universal milling machine, the type of cutting - abrasive (sand), is used for cutting the damaged pipe sections and other pieces of equipment in the well. Downhole face cutter, the type of cutting - abrasive (sand), is used for cutting the damaged pipe sections and other pieces of equipment in the well.
UNIVERSAL CUTTER technical characteristics: Designation Part number D d D1 d1 FK 00.00.000 FK 110-80 110 80 320 106 72 01 FK 112-82 112 82 320 108 72 02 FK 136-102 136 102 350 132 104 03 FK 140-110 140 110 350 136 104 04 FK 155-125 155 125 240 151 116 05 FK 185-152 185 152 370 181 144 06 FK 210-179 210 179 260 206 144
Construction and wells repair equipment: LAUNCH CONTROL UNIT AND WELL
1 - challenged. 2 - gate valve with manual control. 3, 9 - Flange deaf. 4, 8 - double cube. 5 - flange back. 6, 7 - flange weld. 10 - dice. 11 - frame. 12 - the valve needle. 13 - media separator membrane. 14 - gauge. 15 - the union of the corner. 16 - valve with manual transmission.
Design Feature: The location of the unit on the stand provides the ability to deliver it to the installation site in a short time, which minimizes downtime repaired wells. Prednazanachen unit for binding of the stem-mas tree in order to ensure the circulation of labor and technological environment during the construction and repair of oil and gas wells. Corps crosses, tees, uglovikov, weld flanges are made of forged blanks that Class AA by API 6A.
Technical characteristics: Working pressure, MPa 70 Orifice in., 65 Valve direct-flow valve with seal in the gate "metal-metal" gate valves operation manual The force on the flywheel, kN, not more 0.45 Average service life, years 15
It is intended for transporting the gas flow with low pressure and degassing oil in the pipeline by the gas pressure increases from 3.7 to 5.2 MPa. The ejector is used in regions where the average temperature for 5 days did not drop below -20 degrees Celsius and the relative humidity reaches 100%. Operating environment - oil and gas, purified from mechanical and liquid impurities. Manufactured in accordance with the specifications of API Spec. 6A.
Design features: held for ejector 100% X-ray study of the forging. The hardness of the exhaust nozzle of HRC 35 - 40.
Technical characteristics: Capacity, m3/day., No more: 710 The volume of the incoming gas stream m3/day., No more: 460 The volume of effluent gas m3/day., No more: 480 Working pressure, Mpa: 14 Pressure outlet of the ejector, Mpa: 5,2 Overall dimensions, mm: 1465864310 Weight, kg, not more: 300
32 | P a g e
Shaped FIXTURES
1 - Adapter, 2 - elbow, 3 - Tee
They are used in equipment for the petrochemical industry. They are made from forgings, forgings and bulk pipes, jumps can be used in long products. Conduct mandatory testing of hydraulic components, and then - magnetic particle and magnetic particle color.
Specifications: Working pressure, MPa 10 - 100 Nominal diameter, mm 6 - 200 Operating temperature, Celsius -60 to +540
33 | P a g e
Adapters: TRANSITIONS
Tube adapter intended to connect the columns with different types of pipe thread connections and also for downhole equipment that is used for oil and gas, with threads corresponding to the threads of adapters.
Technical characteristics: Working pressure, MPa, more: 21 Working Environment: Gas, oil, condensate with CO2 to 6% Operating temperature, degrees Celsius: 10 to 120 Thread Types: 2 3/8 ", 2 7/8", 3 1/2 " The circular pipe thread with upset ends in accordance with STD-5B-88API USA; Carving 60, 73, 89 NK for simple tubes; Thread 2 7/8 "VAGT similar VAM Overall dimensions, mm: Length: 500* * - Length from 1000 mm to 1500 mm on request.
34 | P a g e
Pneumo-hydraulic installation and stands CONTROLLER- Christmas tree
1. Plug fuse. 2. The pressure to the hydraulic drive side gate. 3. The pressure to the hydraulic actuator stem in part. 4. Pressure to the hydraulic underground shut- off valves. 5. Control signal pressure. 6. Control signal to a low-pressure. 7. Supply system pressure. 8. Control Panel. 9. Pneumatically control unit hydraulic power. 10. The hand-held remote emergency shutdown. 11. Pipe work environment. 12. Gas separator 13. High-pressure unit. 14. Low-pressure unit. 15. Valve shutoff. 16. Pressure Regulator. 17. gazovod. 18. The air. 19. Source Control.
Station game is intended for manual and automatic remote emergency shutdown wellhead of the well. Emergency shutdown occurs in the following cases: o Too high or low blood pressure. o Fusion of one or more fusible plugs fire protection system. o Used to work in a humid climate in the presence of traces of H2S.
Design feature - a control station is autonomous, its main source of energy - the nitrogen tank, which, as its consumption recharge service personnel.
35 | P a g e
Specifications: The control system valves: automatic remote with hydraulic Number of controlled valves: Stem (head), PN 21 MPa: 1 Side, PN 21 MPa: 2 Controlled shutoff valve, PN 50 MPa: 1 Working Environment: natural gas with CO2 and H2S obsession to 25% by volume of each Operating temperature, Celsius: -45 to +45 The worker agent in the pneumatic control system, PN 15 MPa, V = 40 l: Nitrogen (4 cylinder) The worker agent in the hydraulic control system, PN 15 MPa, V = 60 l: silicon-organic hydraulic fluid Number of hydraulic pumps: - Hydropneumatic, PN 21 MPa: 1 - Hydropneumatic, PN 50 MPa: 1 - Hydraulic (manual), PN 60 MPa: 1
36 | P a g e
Process equipment INSTALLATION for hydraulic CASING AND DRILL PIPE
High pressure control panel. Auxiliary hydraulic control system. Control panel. Steady-rests. Pipe transporting mechanism drive. Back head. Base. Basement with watertank. Inlet roller table. Pipe transporting mechanism. Electric boxes. Retainer. Daytank of hydraulic system. Tested pipe. Front head. Outlet roller table.
37 | P a g e
The unit is designed for crimping pipe test pressure under control input.
Process hydraulic test pressure pipes comprises: 1. Receiving an input pipe roller conveyor with automatic metering of its length to position the carriage back head. 2. supply pipe from the input shaft to the roller conveyor installation. 3. institution in the respective ends of the pipe sealing heads with axial circuit - movement forward head carriage, and a radial - with lunettes. 4. the overlap zone placement test tube guard. 5. exclusion of air inside of the tube during its filling with water. 6. asc pressure water filled the internal cavity to a predetermined level (22,5 ... 70 MPa), followed by aging under pressure for 20 seconds, 10 .... 7. collapse and the subsequent discharge of water from the inside of the tube by gravity in the derivation of the ends of the sealing heads (after opening the lunettes and discharge guard). 8. transmission pipe axis of the unit on the output roller conveyor with subsequent transportation to the testing site.
Technical characteristics: Parameter name: Parameter Value: OD test tubes mm: - the smallest 127 - the greatest 245 The outer diameter of the coupling of the test tubes, mm: - the smallest 141,3 - the greatest 270 Length of test pipe mm - the smallest 8 500 - the highest 12 500 lschina walls of test tubes, mm: - the smallest 7,5 - the highest 12,7 Operating pressure of the fluid model, MPa: - the smallest 22,5 - the greatest 70 Working pressure, MPa: - the greatest 0,8 - the smallest 0,5 Rated pressure of hydraulic fluid in the auxiliary hydraulic system, MPa 5 Temperature model fluid, degrees Celsius +5 to +45 Time to fill the pipe fluid model parameters with the largest diameter, length, and the test pressure of not more seconds
30 The greatest time of enrollment pressure in the casing diameter of 245 and a length of 12 500 mm, not more seconds 60 38 | P a g e
Exposure Time casing pressure sec 10 to 20 The angle of inclination relative to the horizontal axis of the installation plane in the direction of the process stream, degrees not more than 130 The angle of inclination of the axis of the input roller conveyor relative to a horizontal plane in the direction of the process stream, degrees not more than 130 Unit operating mode semi-automatic, manual, adjustment The input conveyor rollers reversible Nominal speed of the roller tables pipes (depending on the diameter of test tube), m / sec. 0.2 to 0.25 The greatest stroke of the ram module front head, mm 1250 Ram Speed mm / sec. from 0 to 130 The deflection of the drive belt when you press the middle of the branches with a force of 30N (3 kg), mm 15 Maximum stroke of the carriage unit back head, mm 3500 Speed of the carriage rear head unit, mm / sec. from 0 to 200 Nominal force, supported by a hydraulic cylinder mechanism clamp test tube backrest at a nominal pressure of oil in the auxiliary hydraulic system, H (kgf) 31 800 (3180) Stroke lunettes supports, however, mm 58 The distance between the axes of the columns in the length of installation, mm 1200+0,1 The common axis of rollers kept well input and output roller tables from nearest column axis, mm 600+2 Travel speed test tube rudder mechanism (adjustable), m / s. 0 to 5 Installed capacity in kW 210 Voltage power circuit, V 380 Control voltage, V: - AC 110 - DC 24
It is intended to contain the pressure in the wellbore and provide launching and recovery tool on the wire (rope) during maintenance work without changing the pressure in the wellbore.
Specifications: Working pressure, MPa: 21 Working Environment: oil, gas and wash liquid condensate with H2S and CO2 6% by volume of each Operating temperature, Celsius: 120 The diameter of the wire (cable), mm: 2.5 (4.6) overall dimensions: 2353048005 Weight: 340
This tool is used for threading on the casing to further mount the head casing.
Design features: High precision centering on in the outside diameter of the casing. Environmentally friendly hydraulic drive.
Technical characteristics: OVC-118.00 OVC-157.00 The pressure in the supply line, MPa - nominal 6,3 10,0 - the maximum 8,0 12,5 Nominal size of the casing, mm 245, 219, 194, 178 344, 299, 273 Accuracy with respect to alignment ND casing mm +/-0,5 +/-0,5 The number of rotations per minute cutting tool / min, adjustable 12-25 10-20 Low Ambient, degrees Celsius -15 -15 Overall dimensions, mm 960960845 10801080845 Weight is equal to or less 460 650
This device is designed to remove the valve from the wellhead well under pressure, and the installation of a new or repaired valve without preostanovki work well.
Design features: Opportunity to carry out without killing the well. The possibility of mounting the device at the Christmas tree with the attachment to the connecting flange and the wing valve. The sealing member covers the sealant extending through a forced change of shape and volume.
42 | P a g e
Technical characteristics: Size valves, revocable device mm x MPa 10035; 10021; 15021 Well pressure at which the valve can be changed, MPa, the maximum - 10035 27 - 10021, 15021 12 Maximum stroke packer, mm, 1490 The diameters of the plugs for valves, mm - DN 100 96 - DN 150 146 Overall dimensions, mm - Length: in the assembly 5545 packaged 2845 - Width: in the assembly 1200 packaged 630 Height: 310 Weight 600
43 | P a g e
A SPOT PREVENTER
Designed for sealing in construction, development and repair of wells. Manufactured in accordance to the specifications of API 16A.
Design features:
Dice mechanized change: kryschshki opened by hydraulics Wellbore pressure provides an additional seal by closing the dies Simplicity of design provides easy replacement of all necessary seals and key parts.
1 Body 2 - Cylinder to change dies 3 - The working cylinder 4 - Manual lock plate 5 - Dice
Technical characteristics
Designation equipment Description rated size in mm Working pressure conditional passage outlet hole PSI MPa 498074-24-10-28-02 Single ram preventer 180 52 10 000 70 499074-24-10-28-02 double ram BOP 180 52 10 000 70
44 | P a g e
Manifold
Designed for circulating fluids in oil and gas wells in the process of building and repairing in order to safe operations, maintaining the desired pressure at the mouth, preventing emissions and outdoor fountains and protecting the natural resources and the environment.
Design Features: Perhaps one-and two-way manifold location relative to the wellhead The complete set of manifold separators, fluted chokes and valves, and control panels. Possible to produce a corrosion-resistant (to hydrogen sulfide) performance Modular design provides ease of installation and transportation.
Technical characteristics: operating pressure, Mpa 70 internal diameters, 80 gate valves operation Manual, Remote The pressure on the control line, Mpa 9 - 21 Nominal diameter of the nozzle, 38 Operating temperature, C Up to 90 overall dimensions, mm 23 380 7 800 1 500 Service life, years 6
46 | P a g e
REPAIR PLASHECHNOGO PREVENTER
Designed for sealing and repairing wells in order to fix leaks and public fountains.
Design Features:
Well pressure creates an additional seal when closing the dies Design allows easy replacement of all seals and major parts when needed.
1 - Die blank 2 - Piston cylinder with manual brakes 3 - Hydraulic cylinder 4 - Die tube 5 - Cover 6 - Body 7 - Pipelines to pump-storage plant.
Controller blowout: Designed to control the BOP and manifold valves hydraulically to seal the mouth of the well and make the necessary technological operations for drilling and work over of oil and gas wells. Manufactured in accordance with the technical standards of API 16D.
The station provides: uninterrupted supply of hydraulic fluid to drive systems OP command from the main control panel or remote control driller, truemogo maintaining fluid pressure, work in a moderate, moderately cold and cold climates.
The set of equipment: pump-accumulator station with the main control unit remote control driller: optional remote control driller (may be completed in the order) Flexible high-pressure hoses.
48 | P a g e
Specifications: The number of hydraulic components, managed GTC 6 Nominal pressure, MPa 21 Vol hydraulic cylinder l 218 Reagent buffer solution in pneumatic hydraulic accumulator nitrogen Power of electric power drive, kW 18,5 The voltage required for the motor, V 380 The pressure at the inlet emergency backup pneumatic actuator, MPa, more 1,0 The volume of petroleum (oil) tanker l 600 Performance three-cylinder pump, l / min. 32,9 Performance piston compressor, l / min. 18,9 Diameter pipeline connecting with the blowout preventer 1" Overall dimensions of the battery unit with substation control, mm - length 3700 - width 2000 - height 1900 Dimensions remote driller mm - length 320 - width 740 - height 770 Overall dimensions of the slide, mm - length 6000 - width 1900 - height 170 Weight control stations kg 4500
49 | P a g e
Universal annular preventer
It is intended to seal the well head around any part of the drill string and the complete overlap well in the absence of her instrument. Manufactured in accordance with the specifications of API 16A.
Design features:
Well pressure contributes to further the effective compaction. simple design which makes it easy for replacement of all seals and main parts. available in corrosion resistant (to hydrogen sulfide) performance.
1 Cover 2 seal 3 Housing 4 pistons
Technical Specifications designation of equipment conditional pass, mm Working pressure PSI Mpa 497073-10-25-01 180 5000 35 PUG -15621 156 3000 21 PUG -18021 180 3000 21
50 | P a g e
UNIVERSAL ROTARY PREVENTER
It is intended to seal the well head when the tripping pressure down hole environments, provides rotation of the column as well as a complete coverage of the wellhead in the absence of its instrument. It combines in one unit the functions of the two - the universal and rotating - preventers. Manufactured in accordance with the specifications of API 16A.
Using the universal rotating BOP increases the safety of drilling operations; improve the system of protection of the environment. Possible to produce a corrosion-resistant design.
1 - Lower body 2 - bayonet nut 3 - Roller Bearing 4 - Upper body 5 Shaft 6 Seal 7 - chevron seal 8 - cover 9 flange 10 liner 11 Pump 12 - Drive
51 | P a g e
Technical characteristics: Pressure, MPa -Working pressure during rotation -Working pressure without rotation -Test pressure 7 14 21
The diameter of the orifice, mm 280 Sealing the pipe diameter, mm - Drillstring - Drill pipe leading, square - drill-pipe leading hex 114; 127 112;140 108; 133,4 The average temperature, degrees Celsius 150
52 | P a g e
ELEVATOR
1 - Locking handle (lock) 2 - body 3 - axis 4 - door 5 - handle
It is used to capture and hold the casing or tubing during tripping operations, construction and maintenance of oil and gas wells. It is used to work in temperate climates.
Design features:
Housing made by precision casting original design of the valves elevator provides a secure fit in the "closed" Significantly improves safety during operation in all weather conditions.
Technical characteristics: Load rating, kN 750 Pipe diameter, mm 48, 60, 73, 86, 102, 114, 127, 140, 146, 168 Lever Diameter, mm 45 Overall dimensions, mm length x diameter x height 530h320h210 Weight, kg, not more than 60
53 | P a g e
SPIDER-ELEVATOR
Spider-elevator SEP-125 with pneumatic actuator BOT-125 PNEUMATIC DRIVE
1 body 2 pneumatic 3 - wedge suspension 4 - Arm, 5 - Screw 6 - eye bolt 7 - axis of the door 8 - Door 9 - Replaceable blade (plate) 10 - pin 11 - centralizer replacement
Designed for capturing, holding the weight of the tubing (NCB) under the round-trip operations during construction, repair and operation of oil and gas wells. It can be used in moderate climates.
Design features:
Housing, cams (wedges) are a way of precision casting. Reinforced by the original technology interchangeable plates ensure a long service life of Spider-elevators. Top jaws and dies allow you to use Spider-elevators in a wide range of diameters casing of domestic and foreign production. Can operate in a manual actuator.
54 | P a g e
Technical characteristics: Gruzopdemnost 1250 kN Pipe diameter mm 48, 60.3, 73, 88.9, 102, 114.5 Overall dimensions 795h685h440 Average service life 6 years The pressure in the pneumatic actuator, 0.6 Mpa The working environment in the pneumatic actuator compressed air ,nitrogen
55 | P a g e
Spider and Spider-elevator
1 Funnel 2 - the guide ring 3 housing 4 - the locking mechanism 5 Catch 6 lever 7 fork 8 - housing 9 Cam 10 directing 11 - inserts (dies) 12 shield 13 Axis 14 - Door
Designed for round-trips, capturing and holding the weight of the rotor or on the table casing or tubing for screwing and unscrewing drill pipe recovered from the well or intended to walk down the construction and repair of oil and gas wells. Category of performance and accommodation - U1 to GOST 15150-69. Macro-area operation - II4-II12 GOST 16350-80.
Design features:
Housing, cams (wedges) are a way of precision casting. Hardening of the original technology interchangeable plates ensure a long service life of spiders and spider-elevators. Interchangeable jaws and dies allow you to use spiders and spider-elevators in a wide range of diameters casing of domestic and foreign production. When using the machine as spider plate is installed on the body, and when used as an elevator - a funnel.
56 | P a g e
Main technical characteristics: Parameter Value Load rating Pipe diameters in mm, kN 750,1250,2500,3500 Pipe diameters in mm: -For g / n 750.1250 48,60,73,89,102,114 - For g / n 2500, 3500 127,140,146,168,178,194,219,245,273,324,346 Overall dimensions, mm 1300x1030x990 Average service life years 6
57 | P a g e
A set of equipment for gas-lift method for oil extraction
1 - lubricator 2 - Winch 3 - Preventer 4, 5, 6 - borehole camera 7 - circulation valve 8 - Device for the separation column tube 9 hydraulic packer
Designed for the development and operation of conditional straight and directional oil wells for gas lift method of extraction of oil without pulling the tubing after the fountain method of operation. Used in oil wells with hydrogen sulfide and carbon dioxide and 6% by volume of each. Manufactured in accordance with the specifications of API 11V1.
Technical characteristics: Working pressure, MPa 21 Nominal diameter of the casing, mm (in.) 140 (5 1/2") Nominal diameter of the tubing, mm (in.) 60 (2 3/8") Conditional diameter valves, mm 25 Operating temperature, degrees Celsius from 10 to 120
The complex "Barrier 6M" is designed for use in gas wells. Can be used in gas wells within a reservoir with CO2 obsession to 1% by volume. Service life - at least 10 years, the sealing element must be replaced after 5 years, at a regular scheduled maintenance of the well. Operating environment - non-corrosive natural gas with CO2 to 1% by volume. Used to work in temperate climates.
Technical characteristics: Working pressure, Mpa 35 The diameter of the first casing, inches 6 5/8" The diameter of the tubing, mm 3 1/2" - 41/2" (possible to use 4 inch tubing adapter) The reservoir temperature, degrees Celsius Up to 80
59 | P a g e
The deep safety shutoff valve with independent drive type CPC-73
1 - Nut top, 2 - the case 3 - Bush 4 - lower nut 5 - liner 6 - Valve 7 - support
Designed for operational overlap pipe duct tubing to avoid the occurrence of open spouting reservoir fluid. Place the valve slam shut - part of the compressor piping. It is used in temperate and continental climates.
Design Features: The ability to configure bridging device (the ball) to different operating conditions (pressure alarm).
Technical characteristics: Working pressure, MPa 35 Test pressure, MPa 70 Time to failure, cycles 100 Service life, years 10 Working Environment gas, gas condensate, oil reservoir water and mixtures The inner diameter of the flow channel, mm 62 Overall dimensions, mm length 650 diameter 114 Weight, kg 25
Availability of this device in the form of an elastic sleeve, sealing the annulus with divergent sectors. Equipment is intended for: o Separation of the annulus from the well that is in the established process conditions including the filing of the inhibitor into the tubular conduit o compensate for changes in the length of tubing when temperature fluctuations in the well o Development, research, shut-in and replace the tubing without first squeezing the well o Treatment of the bottom hole formation zone for the purpose of boosting fluid flow o The place of installation - in the tubing near the bottom of the well.
61 | P a g e
Specifications: The maximum differential pressure at a site of the formation and dissociation of the well annulus, Mpa 25 Maximum pressure required for installation in the wellbore, MPa 70 Service life, years 10 Working Environment Gas, gas condensate, crude oil, formation water, drilling fluid, or mixtures thereof with possible content of H2S and CO2 and 25% by volume of each Nominal diameter of the tubing, mm 114
62 | P a g e
COMPLETE SYSTEM "BARRIER 6ORE" for the simultaneous production of the well two-tank
Designed for installation in wells with two tanks. It can be used in moderate climates. From the bottom of the tank gas is extracted through tubing diameter of 4 1/2 ", and the top of the tank - and the annulus packer bypass pipe that is controlled by a special valve.
Design features: The complex is effectively used in fields with multiple reservoirs complicated operating conditions as well as increased requirements for environmental protection.
63 | P a g e
Technical characteristics: Working pressure, MPa (kg/m3) 21 (210) Working Environment Non-corrosive natural gas with CO2 to 1.5%, gas condensate, condensation and salt water, some of the mechanical mixture. The reservoir temperature, degrees Celsius Up to 50 The upper section of the well, in. Casing 9 5/8" tubing 4 1/2" The lower portion of the wellbore, in. casing 6 5/8" Tubing 3 1/2" - 4 1/2"
64 | P a g e
Submersible MAINTENANCE EQUIPMENT OR-168
1 - pipe 2 - a funnel-shaped bell tower napralyayuschey 3 - Ring 4 - sleeve 5 - piston 6 - uplontitelnoe ring 7 - Bolt 8 - the case 9 - cone nozzle 10 - Coupling of separation 11 - detachable sleeve 12 - Ring 13 - wire winding 14 - valve 15 - cover 16 - Nut 17 - plug
Design features: Safety valve automatically closes the flow channel tubing in the process of recovery. The equipment is intended for: separation of the formation penetrated by the wellbore annulus from prevent the uncontrolled operation of the well Operating in a proper process conditions, including the filing of the inhibitor in the pass of the tubing; Compensation Amendments length of tubing, if necessary, due to the terms of the well; Research and development and priostanvki of the well tubing and replace without killing the well impact downhole zone to increase the flow rate of oil.
65 | P a g e
Specifications: The maximum pressure drop in the node separation layer and the annulus, MPa, 25 The maximum pressure drop required for equipment installation in the wellbore, MPa 20 Service life, years 10 Nominal diameter of the tubing, mm 114 Outer diameter, mm 148 Length, mm 1560 The diameter of the jet opening, mm 59 Working Environment Gas condensate, oil, formation water, drilling mud, and mixtures thereof with an allowable content of H2S and CO2 and 25% each.
Designed to provide a hermetic separation annulus between the production casing and tubing.
Design features: Plaschek special heat treatment, which increases their durability Ease of removal.
Technical characteristics: Working pressure, Mpa 35 Working Environment Oil, gas, gas condensate Operating temperature, degrees Celsius 120 Outer diameter, mm 118 122 140 Bore diameter, mm 50 50 76 The maximum internal diameter of the tube, ensuring tightness of separation, mm 126 132 154
67 | P a g e
Tools of operation intervention
68 | P a g e
Universal Packer
1 - Barrel 2, 6 - nut 3, 5 - housing 4 - cylinder
Designed for hermetic separation bearing from the annular space of the ring for a period of hardening cement. Used to work in the temperate and continental climate.
Technical characteristics: Working pressure, Mpa 35 Working Environment Oil, gas, gas condensate Operating temperature, degrees Celsius 120 Outer diameter, mm 140 Bore diameter, mm 76 The maximum internal diameter of the casing, ensuring tightness of separation, mm.
154 Overall dimensions, mm Diameter, mm 1700 Length, mm 188
69 | P a g e
BALL VALVE
1 - Saddle, 2 - Building 3 - cover zalvizhki 4 - ball 5 - Rod 6 - top cover 7 - an indicator of the locking device 8 - spiral disk 9 - rear seat
Regulators are applied as a shut-off valve for piping the gas fields, gas processing plants and reservoirs. Operating environment - natural gas with CO2 and H2s to 6% each. Low gas - from -15 to +80 degrees Celsius. Ambient temperature - from -46 to +50 degrees Celsius. Relative humidity - 90%. They are manufactured in accordance with the specifications API 6D.
Design features: cast housing made by precision casting. Replacement of ball can be made without removing the valve from the pipeline
70 | P a g e
Technical Characteristics: Marking equipment Nominal diameter of the passage, mm (inch) class by API 6D Working pressure, MPa BV 02.02.25-00.000 50,8 (2 ") 1500 25 BV 02.50.25-00.000 63,5 (2 S ") 1500 25 BV 03.03.25-00.000 76,2 (3 ") in 1500 25 BV 04.04.10-00.000 101,6 (4 ") 600 10 BV 04.04.25-00.000 101,6 (4 ") 1500 25 BV 06.06.25-00. 000 152,4 (6 ") 1500 25
71 | P a g e
Check valve
1 Body 2 cover 3 - Disc 4 saddle 5 - guide bush 6 Spring 7 bearing 8 seal 9 - cuff.
Installed on pipes to prevent backflow into them and reverse rotation, which protects seals and drive units from damage. Manufactured in accordance with the specifications of ARI 6D. Medium - natural gas containing H2S and CO2 6% by volume of each. Low gas - from -15 to +80 degrees Celsius. Ambient temperature - from -46 to +50 degrees Celsius Ambient relative humidity - 90%.
Design Features minimum loss of pressure cast housing Sealing surfaces of the seat and the disc is welded durable and corrosion-resistant material.
Technical characteristics: Marking equipment Nominal diameter bore, mm (inches) Class by API 6D Working pressure, MPa CV 400.080.00.00.000 400 (16 ") 600 10 CV 400.160.00.00.000 400 (16 ") 800 15 72 | P a g e
Designed for installation on the technological liniyahpodgotovki gas using turbine expansion units. Equipped with pneumatic, operating on the energy of the air pressure instrumentation (6-8 kg/cm2) or gas (30-75 kgf/cm2) transmitted in the air system energy with the disappearance of the drive does not change the position of the plunger gate that was available to her disappearance. The actuator can be operated manually.
Technical characteristics: Operating pressure valve in the "closed": Pin, MPa (kgf/cm2) 11 (110) Pout, MPa (kgf/cm2) 6 (60) Operating pressure valve in the "open": Pin, MPa (kgf/cm2) 6.5 (56) Pout, MPa (kgf/cm2) 6.45 (64.5) Working environment natural gas Gas temperature -35 degrees Celsius to +60 Ambient temperature during operation, hail. C -46 to +50 The ambient temperature during transport and storage, degrees Celsius
-60 to +40
73 | P a g e
CRANE MOUTH CRANE ESTUARINE
1 - saddle 2 - the case 3 - valves ball 4, 6, 12 - Bush 5 - support 7 - Nut 8 - the split ring 9, 17 - a protective ring 10, 15, 18 - ring 11 - Spring 13, 16 - manzhenta 14 - Spindle
Designed for operational overlap pipe channel drill string to exclude the possibility of an open gushing fluid flow from the well. Operating temperature range - from -60 to +100 degrees Celsius. Medium - mud formation water, gas, gas condensate, crude oil, or mixtures thereof.
Design features: body is made of forged balloon has a high degree of surface finish Seat sealing member made of a composite material having high tensile strength, hardness, Charpy and basically comprises graphite filler.
1 - body 2 - Wedge 3 - position indicator "open-closed" 4 - flywheel 5 - stock 6 - seal 7 - cover 8 - pozhshipnik 9, 10 - to seal the stem
It is intended to cover the orifice in the discharge manifold, mud pumps. Attaching to the pipe by means of drags. The design of valves ensures its assembly and disassembly, replacement of the valve plug and seals without removing it from the manifold.
Design features: Obturator tightness achieved by overlapping flow area valve wedge. Low-end torque for opening and closing is ensured by the use of standard roller bearings.
Technical characteristics: Working pressure, MPa 25 Nominal size , mm 100 Working environment Mud Dimensions 480h450h615 Weight, kg, not more than 70
76 | P a g e
Hydraulic throttle (Hydraulic chokes)
1 - body, 2 - removable sleeve, 3, 23 - lock nut, 4 - seddlo, 5, 10, 14 - the support ring, 6, 11, 15, 20, 21, 22, 32 - the seal ring, 7 - shutter 8 - locking front, 9 - drive housing, 12 - lock the rear, 13, 27 - washer, 16 - ring 17 - ring intermediate, 18 - rod seal, 19 - the actuator stem 24 - a cover drive 25 - a lock ring, 27 - a lining, 28 - a bolt, 29 - Connect the quick interior, 30, 35 - gon 31 - a connection 33 - piston 34 - Connect the external quick.
Designed to change the flow of the working environment as well as to change the direction of the working environment. Hydraulically driven, providing its remote control. It is an integral part of the manifold BOP.
77 | P a g e
Technical characteristics Passage conditional mm (in) 78 (3 1/16) Working pressure, MPa (psi) 70 (10000) Type of sealing metal to metal Operating temperature range, from -60 degrees Celsius to +100 Working environment drilling fluid, drilling mud, oil, gas condensate, produced water, gas and mixtures thereof Material class AA, EE, FF Pneumatic control pressure, MPa (kgf/cm2) 3.15 (31.5) Working environment multigrade hydraulic oil drive Overall dimensions 760h403, 5h278
78 | P a g e
SAFETY VALVE
1 - Body 2 - the exhaust pipe 3 - disc 4 - cover 5 - spring.
Designed for the release of the secure system of excess fluid, which creates high blood pressure. Method actuation - spiral force the valve disc. Sealing prstranstva, where is the spiral, the operating environment is provided by a sucker rod seal and flange gasket.
Design features: the case is made by precision casting High seal - the environment, as well as compounds "saddle-disk".
79 | P a g e
Technical characteristics: 4 "x 6" class 600/150 4 "x 6" Class 900/150 Opening pressure, kgf/cm2 46 60 Operating environment The gas, gas condensate,H2S and CO2 to 6% each volume chloride to 160 g / land fur. impurities to 80g/1000 m3. Gas, gas condensate H2S and CO2 to 6%
the volume of each: chloride 160 g / l fur. impurities 80g/1000 m3. The ambient temperature, degree. Celsius - At least -46 -46 - A maximum of 43 +43 Media temperature, hail. Celsius - At least -15 -20 - A maximum of 20 +15 Overall and mounting dimensions according to ANSI B 16.5 ANSI B 16.5
80 | P a g e
Valve with damping device
1 - Body 2 - Shutter 3 - damper 4 - Plug 5 - flange 6 - saddle 7 - cover 8 - Ring 9 - Ring 10 - split ring 11 - plug
Designed to prevent back flow of gas medium and safe operation of equipment and personnel. Mounted on horizontal ground and underground pipelines. Manufactured according to the specifications of API 6D.
Design Features: the case is made by injection Sealed to the outer environment. Damper has a safety valve to valve and hydraulic shock absorber.
81 | P a g e
Technical characteristics: Nominal diameter of the bore,mm 400 Rated working pressure, MPa 16 Working environment natural gas with H2O and CO2 to 6% Media temperature, hail. Celsius
the volume of each - Minimum -46 - Maximum 80 Connecting dimensions of flanges ANSI B16.5 Hydraulic losses at rated power, MPa 0.01 Lifetime, years, at least 12 Mean time between failures, h (cycles) 25,000 (1,000)
82 | P a g e
VALVE WITH TWO SYSTEMS OF CONTROL AND MANOMEROM
1 - body, 2 - ring 3 - Bush, 4 - nut, 5 - valve 6 - saddle 7 - seal 8 - the retaining device, 9 - ring 10 - the sector 11 - Spring, 12 - the spindle 13 - seal 14 - ball 15 - Ring
It is intended to cover the orifice tube to prevent the uncontrolled flow of the well and for monitoring and measuring the pressure in the tubing. The valve mounted in the conduit at the wellhead.
Design features: Body is made of forged. Balloon has a high degree of surface finish. Seat sealing member made of a composite material having high tensile. Strength, hardness, Charpy and basically comprises graphite filler.
83 | P a g e
Technical characteristics: Nominal diameter of bore, mm 62 Outer diameter , mm 155 Working pressure, MPa 35 Test pressure, MPa 70 Working environment The drilling fluid, formation water, gas, gas condensate, crude oil, and mixtures thereof Service life, years 10 Mean time between failures, h (cycles) 100 Length, mm 600 Weight 55
It is designed to fully stop the flow in the pipeline. Fluid pressure in the block valve provides a high level germetizatsii.Uplotnenie gate orifice - "metal - metal". They are manufactured in accordance with the technical requirements of API Spec. 6D.
Technical characteristics: ZK-3X150 ZK-4X150 ZK-6X150 ZKL2-65X160 Working pressure, MPa 2 2 2 16 Nominal size, mm (inch) 80 (3) 100 (4) 150 (6) 65 (2 9/16) Operating temperature, degrees Celsius -46 to +120 -46 to +120 -46 to +120 -20 to +300 Level Product Specifications PSL2 PSL2 PSL2 PSL1 class of material EE EE EE AA
85 | P a g e
SHFRAs License and registration:
Certificate of incorporation in Sudanese ministry of justice. Import and export license.
Registration in Sudanese union of chambers of commerce
86 | P a g e
Awards and certifications:
1. Remote Sensing Imagery (RSI).
1. European Space Agency: ID: 61154 SSO ID: Russian Remote Sensing Systems Institution: Russian Remote Sensing Systems RosAviaCosmos licensed services provider 186 Current country of residence: RUSSIAN FEDERATION Study Area: Various Primary App ication: Geology Domain Executive: Researches on methods for multisource data analysis in remote sensing Summary: Funded by Russian Pro Systems, a Russian innovative company.
2. INNOVATION CENTER "SKOLKOVO".
THE MODERN SCIENTIFIC AND TECHNOLOGICAL COMPLEX FOR THE DEVELOPMENT AND COMMERCIALIZATION OF NEW TECHNOLOGIES. IN THE COMPLEX PROVIDE SPECIAL ECONOMIC CONDITIONS FOR COMPANIES OPERATING IN THE PRIORITY SECTORS OF THE MODERNIZATION OF THE RUSSIAN ECONOMY: TELECOMMUNICATIONS AND SPACE, MEDICAL TECHNOLOGY, ENERGY, INFORMATION TECHNOLOGY, AND NUCLEAR TECHNOLOGY.
National space activity is an indispensable part of scientific-technical and spiritual legacy of Russia.
87 | P a g e
2. Autonomous drilling units (ABBA):
This pattern approved certificate from Russian Federation government. This Quality Control certificate for using ABBA technology in drilling process. From ministry energy Russian Federation.
88 | P a g e
3. Water shut-off with using AKRON-RK composition:
This certificate for water cut compound from Russian Federation government. This certificate for using chemical product in technology process in oil transportation and development from ministry energy Russian Federation.
Quality control certificate from Fuel energy complex in Russian Federation.
Hygienic certificate from Russian health ministry.
89 | P a g e
Innocence statement from Russian Federal service for toxic effects.
Health validity statement from Russian Federal service. Reference on activity of CJSC Scientific and Production Centre (NEFTEMASH-NAUKA).
90 | P a g e
4. The Plasma Generator of Elastic Pulses (PGEP):
It is covered by patents of Ukraine and characterized by absolute ecological safety, high effectiveness and low power inputs.