0 evaluări0% au considerat acest document util (0 voturi)
822 vizualizări2 pagini
The document outlines specifications and limits for various types of marine distillate and residual fuels according to ISO 8217 standards. It provides parameters such as viscosity, density, sulfur content, flash point, and maximum limits for distillate fuels including DMX, DMA, DMZ, and DMB as well as residual fuels including RMA, RMB, RMD, RME, RMG, and RMK. Additional notes provide further definitions and requirements for acid number, oxidation stability, sediment content, and other fuel properties.
The document outlines specifications and limits for various types of marine distillate and residual fuels according to ISO 8217 standards. It provides parameters such as viscosity, density, sulfur content, flash point, and maximum limits for distillate fuels including DMX, DMA, DMZ, and DMB as well as residual fuels including RMA, RMB, RMD, RME, RMG, and RMK. Additional notes provide further definitions and requirements for acid number, oxidation stability, sediment content, and other fuel properties.
The document outlines specifications and limits for various types of marine distillate and residual fuels according to ISO 8217 standards. It provides parameters such as viscosity, density, sulfur content, flash point, and maximum limits for distillate fuels including DMX, DMA, DMZ, and DMB as well as residual fuels including RMA, RMB, RMD, RME, RMG, and RMK. Additional notes provide further definitions and requirements for acid number, oxidation stability, sediment content, and other fuel properties.
For marine distillate fuels and for marine residual fuels.
MARINE DISTILLATE FUELS
Parameter Unit Limit DMX DMA DMZ DMB Viscosity at 40C mm /s Max 5.500 6.000 6.000 11.00 Viscosity at 40C mm /s Min 1.400 2.000 3.000 2.000 Micro Caron !esidue at 10" !esidue " m/m Max 0.30 0.30 0.30 # $ensity at 15C %&/m Max # '(0.0 '(0.0 (00.0 Micro Caron !esidue " m/m Max # # # 0.30 )ul*+ur " m/m Max 1.00 1.50 1.50 2.00 ,ater " V/V Max # # # 0.30 -otal sediment y +ot filtration " m/m Max # # # 0.10 .s+ " m/m Max 0.010 0.010 0.010 0.010 Flas+ *oint 0C Min 43.0 60.0 60.0 60.0 /our *oint0 )ummer 0C Max # 0 0 6 /our *oint0 ,inter C Max # #6 #6 0 Cloud *oint C Max #16 # # # Calculated Cetane 1ndex Min 45 40 40 35 .cid 2umer m&345/& Max 0.5 0.5 0.5 0.5 4xidation staility &/m Max 25 25 25 25 6uricity0 corrected 7ear scar diameter 87sd 1.4 at 60C um Max 520 520 520 520 5ydro&en sul*+ide m&/%& Max 2.00 2.00 2.00 2.00 .**earance Clear 9 :ri&+t . sul*+ur limit of 1.00" m/m a**lies in t+e ;mission Control .reas desi&nated y t+e 1nternational Maritime 4r&ani<ation. .s t+ere may e local =ariations0 t+e *urc+aser s+all define t+e maximum sul*+ur content accordin& to t+e rele=ant statutory re>uirements0 not7it+standin& t+e limits &i=en in t+is tale. 1f t+e sam*le is not clear and ri&+t0 total sediment y +ot filtration and 7ater test s+all e re>uired. 4xidation staility and luricity tests are not a**licale if t+e sam*le is not clear and ri&+t. .**licale if sul*+ur is less t+an 0.050" m/m. ;ffecti=e only from 1 ?uly 2012. 1f t+e sam*le is dyed and not trans*arent0 7ater test s+all e re>uired. -+e 7ater content s+all not exceed 200 m&/%& 80.02" m/m@. MARINE RESIDUAL FUELS Parameter Unit Limit RMA RMB RMD RME RMG RMK 10 30 80 180 180 380 500 00 380 500 00 Viscosity at 50C mmA/s Max 10.00 30.00 '0.00 1'0.0 1'0.0 3'0.0 500.0 B00.0 3'0.0 500.0 B00.0 $ensity at 15C %&/m Max (20.0 (60.0 (B5.0 ((1.0 ((1.0 1010.0 A A 3 a ! ! 3 " # " e $ !% " a ! " # e $ a 3 ISO 8217 Fuel Standard http://www.dnv.com/industry/maritime/servicessolutions/fueltesting/fue... 1 von 2 17.05.2013 11:13 Micro Caron !esidue " m/m Max 2.50 10.00 14.00 15.00 1'.00 20.00 .luminium C )ilicon m&/%& Max 25 40 50 60 )odium m&/%& Max 50 100 50 100 .s+ " m/m Max 0.040 0.0B0 0.100 0.150 Vanadium m&/%& Max 50 150 350 450 CC.1 # Max '50 '60 'B0 ,ater " V/V Max 0.30 0.50 /our *oint 8u**er@ 0 )ummer C Max 6 30 /our *oint 8u**er@ 0 ,inter C Max 0 30 Flas+ *oint C Min 60.0 )ul*+ur " m/m Max )tatutory re>uirements -otal )ediment0 a&ed " m/m Max 0.10 .cid 2umer m&345/& Max 2.5 Dsed luricatin& oils 8D64@E Calcium and FincG or Calcium and /+os*+orus m&/%& # -+e fuel s+all e free from D640 and s+all e considered to contain D64 7+en eit+er one of t+e follo7in& conditions is metE Calcium H 30 and <inc H15G or Calcium H 30 and *+os*+orus H 15. 5ydro&en sul*+ide m&/%& Max 2.00 -+is residual marine fuel &rade is formerly $MC distillate under 1)4 '21BE2005. /urc+asers s+all ensure t+at t+is *our *oint is suitale for t+e e>ui*ment on oard0 es*ecially in cold climates. -+e *urc+aser s+all define t+e maximum sul*+ur content accordin& to t+e rele=ant statutory re>uirements. ;ffecti=e only from 1 ?uly 2012. )tron& acids are not acce*tale0 e=en at le=els not detectale y t+e standard test met+ods for ).2. .s acid numers elo7 t+e =alues stated in t+e tale do not &uarantee t+at t+e fuels are free from *rolems associated 7it+ t+e *resence of acidic com*ounds0 it is t+e res*onsiility of t+e su**lier and t+e *urc+aser to a&ree u*on an acce*tale acid numer. )ourceE 1)4 '21B Fourt+ ;dition 2010#06#15 /etroleum *roducts # Fuels 8class F@ # )*ecifications of marine fuels ! ! " e # a ! " # e ISO 8217 Fuel Standard http://www.dnv.com/industry/maritime/servicessolutions/fueltesting/fue... 2 von 2 17.05.2013 11:13