Documente Academic
Documente Profesional
Documente Cultură
(DRAWING # PBBH-S-88-MF)
The HB Series Needle Valve assembly consists of the following major parts (Refer detailed drawing No
PBBH-S-88-MF/4 )
1.
2.
3.
4.
5.
6.
7.
8.
Gland Retainer
Gland Body
Spindle
Lock Nut
Retainer Washer
Packing Support
Gland Washer
Packing - Teflon
do =
Force on spindle required to withstood at 10000 Psi when the valve is in closed condition
24618 = 278.42
88.42
Thus the spindle of gland retainer threading is adequately rated for pressure capability required.
2) Pressure withstand capability calculation for Gland retainer to gland body threading :
Thread type M16; Thread pitch = 1.5mm, = 0.15cm. = t2
Threading length = 29mm
No threads = 29/1.5 = 19.33 = 19 threads
Minimum root diameter of threading = 14.376mm = 1.4376 cm = d2
Tensile shear strength of SS316 material = T = 5918 kg/cm2
Shear withstand area of each thread = d2 t2
= 3.14 x 1.4376 x 0.15 = 0.677 cm2
Shear withstand area of 10 threads
= 0.77 cm2.
4. Pressure withstand capability calculation for section A-A of gland retainer ( Drawing no
PBBH-S-88-MF/2-1)
D0 = 14.376 mm = 1.4376 cm
Di = 8 mm = 0.8 cm
Tensile withstand area of this section
= ( D02 Di2 )
4
= ( 1.43762 0.82 )
4
= 3.14 ( 2.066 0.64)
4
= 1.119 cm2 = A4
Tensile shear strength of SS316 Material = T = 5918 Kg/cm2
Tensile withstand force capability of this section
= T x A4 = 5918 X 1.119 = 6622 Kg
Factor of safety
= Force withstand capability available
Force withstand capability required
6622
88.42
74.89