Documente Academic
Documente Profesional
Documente Cultură
PROCEDURE NUMBER
® TITLE
Cable Management S.O.P. TBD
Section I - General
A. Purpose:
B. Scope:
For Data Cables, once an errant port has been identified, it is much more efficient to
trace cables located in a cable management system to replace bad cables. Cables
that are organized and well labeled are much more efficient and capable of being
manipulated during troubleshooting operations.
C. Definitions:
• Cable Trays, Cable Ladders, and Troths: Are used for cable management. They
are typically used to route cables in an organized manner both vertically and
horizontally. Flex loom or flex Conduit: Are also used to route cables in an
organized manner both vertically and horizontally.
• Cable Run – Is the path that a cable would be routed to achieve connectivity
between point A and point B.
D. Preparation:
E. Cabling/Labeling Procedure:
® TITLE
Cable Management S.O.P. TBD
• Cable management will detail “A” and “Z” locations to show end to end
connectivity.
• Precut and crimped cables will be the correct lengths to ensure short & straight
connectivity and minimal overlapping and over running of cables.
• Data Center equipment should also be labeled properly to ensure the proper port
on a device will be manipulated.
® TITLE
Cable Management S.O.P. TBD
A. - Cable Management:
These cable management diagrams are a reference to how cables will be
sorted and organized in server racks.
Flex Conduit/Innerduct:
® TITLE
Cable Management S.O.P. TBD
Ladder sections:
® TITLE
Cable Management S.O.P. TBD
• They have a highly scratch resistant, durable black powder coat and other
various finishes.
• Once cable specifications are correct, cables should be installed from the switch
horizontally, turned 90 degrees across a ladder rack to avoid radical turn that
can damage cables, then routed vertically and connected to equipment.
• Once cables have been routed properly they should be wrapped with cable ties
every two to three feet apart to secure uniformity.
® TITLE
Cable Management S.O.P. TBD