Sunteți pe pagina 1din 2

Folding Instructions

Orient the template with the “UP” Pull the top right corner down Fold the right side over again and
arrow at the top of the page. toward you and crease along line crease along fold line 2. Repeat
1. Repeat with the top left corner. with the left side.

Fold the nose down toward you Fold the nose back up and crease Fold the tip of the nose back away
along fold line 3. along fold line 4. from you and crease along fold
line 5.

Flap
Flip the plane over. Fold the right Cut along the dotted line 7 for the Tuck the flap that was formed by
half of the plane over onto the left vertical stabilizer. your cut between the two halves of
half along fold line 6. the plane and crease it along fold
lines 8.

When you have completed the step above, your plane VERY IMPORTANT: Pull the back tip of the vertical
will look like this. Fold the wings down along fold lines stabilizer up and toward the front of the plane to put a
8 and the winglets up along fold lines 9. Add wing slight upward curve to the trailing edge of the wings.
dihedral by tilting the wings up slightly away from the This is to prevent the back edge of the wings from
fuselage. The wings will have a slight “V” shape when sagging downward. If you do not do this, your plane
viewed from the front. will nose-dive straight to the ground. After completing
this step, you are ready to fly!
9
Con
nex
ion
Air
lin
es

2
1

8
7
UP

6
5

3
4

8
1
2

S-ar putea să vă placă și