Documente Academic
Documente Profesional
Documente Cultură
,
multiflow
Power Price
RZ-86276-70
20 to 3500 mL/min 700 to 3500 mL/min
20 to 750 mL/min
at 18" 3" H
2
O
115 VAC
RZ-86276-71 230 VAC
Requires use of low-flow adapter 86276-73. Does not display live flow in this mode.
Display shows
flow rate, run time,
and total volume
sampled.
86276-70
RZ-86276-73 Low-flow adapter for multiflow sorbent sampling volumes
from 20 to 750 mL/min ....................................................................................................................
Catalog number Description High flow range
0.001 to 0.75 L/min flow rates require low-flow module 86276-84 or 86276-85.
Catalog number Flow range Power Price
RZ-86276-96
0.001 to 0.25 L/min; 0.02 to 6 L/min; 2 to 30 L/min
115 VAC
RZ-86276-97 230 VAC
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
4
Air/Gas Analysis
AI
Air Sampling / Accessories
C
10370-01
Gas Sampling Accessories
A Scienceware
cases on page 7.
T
echnical info
Easy-to-use colorimetric tubes:
1. Break off the tube tips at both ends.
2. Insert tube into pump (not included) and
draw sample.
3. Read the concentration directly from
the printed scale.
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
7
Air/Gas Analysis
AI
CMS Analyzer / Single-Gas Detectors
CMS Analyzer and Chips
Eliminate user error for a consistent measurement every time
l
Digital display of gas
concentration eliminates
ambiguous results
l
Internal recorder stores up to
50 measurements with
time/date stamp
Just load a CMS gas specific
chip into the bottom port
of the analyzer. Easy-
to-use, three-step slide
switch allows analyzer to
take measurements. Gas
concentration is displayed in
seconds with digital readout.
Operates on four AA batteries
(included). Chips contain
10 tests each and are sold
separately at right.
Approval: UL and CSA listed
intrinsically safe for class
1, Div 1, Groups A-D, T4;
CENELEC EEx ib IIC T4; MSHA
86513-00
CMS Chips
Catalog number Gas/vapor Range Price
RZ-86513-08 Acetic acid 2 to 50 ppm
RZ-86513-09 Acetone 40 to 600 ppm
RZ-86513-10 Ammonia 2 to 50 ppm
RZ-86513-12 Ammonia 100 to 2000 ppm
RZ-86513-14 Benzene 10 to 250 ppm
RZ-86513-16 Carbon dioxide 200 to 3000 ppm
RZ-86513-18 Carbon dioxide 1 to 20%
RZ-86513-20 Carbon monoxide 15 to 150 ppm
RZ-86513-22 Chlorine 0.2 to 10 ppm
RZ-86513-23 Ethylene oxide 0.4 to 5 ppm
RZ-86513-24 Formaldehyde 0.2 to 5 ppm
RZ-86513-25 Hydrogen cyanide 2 to 50 ppm
RZ-86513-26 Hydrogen sulfide 0.2 to 5 ppm
RZ-86513-28 Hydrogen sulfide 2 to 50 ppm
RZ-86513-30 Nitrogen dioxide 0.5 to 25
RZ-86513-32 Oxygen 1 to 30%
RZ-86513-34 Ozone 25 to 1000 ppb
RZ-86513-35 Petroleum hydrocarbons 20 to 500 ppm
RZ-86513-36 Petroleum hydrocarbons 100 to 3000 ppm
RZ-86513-37 Sulfur dioxide 5 to 150
RZ-86513-38 Toluene 10 to 300 ppm
RZ-86513-39 Vinyl chloride 10 to 250 ppm
RZ-86513-40 Xylene 10 to 300 ppm
RZ-09376-01 Replacement batteries, AA. Pack of 10 ................... /pk
Specifications for Analyzer
Power: four AA batteries (included)
Dimensions: 3
1
2"W x 8"H x 1
3
4"D
Instrument wt: 25.6 oz (0.7 kg)
Catalog number Description Price
RZ-86513-00 CMS analyzer
MSHA
Pac 3000/5000 Single-Gas Monitors
Bump test moderequires user to expose monitor to gas periodically or prior to use
The monitor features a robust, rubber-coated weatherproof polymer housing that will stand up
to the typical abuse in an industrial environment. Monitor is maintenance free and can be easily
operated using two buttons. Its small size makes it comfortable and easy to wear all day on a
belt, breast pocket, or lapel. A loud audible alarm, two bright visual alarms, and strong vibrating
alarms alert you to hazardous concentrations of gas.
The Pac 3000 only shows gas formula until the measured value exceeds alarm set point. The
Pac 5000 will continuously display gas concentrations, and is equipped with an event logger
which will store up to 60 alarm activations or other events.
Approval: UL and cUL classified intrinsically safe in Class I, Div. 1,
Groups A, B, C, D, E, F, G T4; ATEX; CE
Catalog
number
Sensor Range Resolution
Alarm set points
Price
Low High
Pac 3000 single-gas monitors
RZ-86515-04 O2 0 to 25% 0.1% 19.50% 23.50%
RZ-86515-00 CO 0 to 500 ppm 1 ppm 35 ppm 50 ppm
RZ-86515-02 H2S 0 to 100 ppm 1 ppm 10 ppm 20 ppm
Pac 5000 single-gas monitors
RZ-86515-14 O2 0 to 25% 0.1% 19.50% 23.50%
RZ-86515-10 CO 0 to 500 ppm 1 ppm 35 ppm 50 ppm
RZ-86515-12 H2S 0 to 100 ppm 1 ppm 10 ppm 20 ppm
Specifications
Alarm: 90 dB at 12 inches (audible/visible/vibrating)
Sensor life: 2 years
Functions: actual concentration, operating time
Display: LCD
Power: lithium battery (included)
Battery life: 2 years
86515-04
Dimensions: 2
1
2"W x 3
1
4"H x
3
4"D
Instrument wt: 4 oz (0.1 kg)
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
8
Air/Gas Analysis
AI
Single-Gas Detectors
ToxiRAE II Personal Gas Monitors
No expiration dateturn on and off
to preserve battery and sensor life
Monitors provide continuous measurement
and display of toxic gas concentration
levels. Readings include STEL, TWA, peak,
and high/low values. Varying audio alarm
signals different alarm conditions to cue
appropriate level of response. Durable,
impact-resistant ABS housing is IP55-rated
and performs well even with RFI interference.
Single button monitor is easy to operate, with
simple calibration procedure and adjustment
of factory settings.
Whats included: belt clip/hard hat adapter,
wrist strap, calibration adapter, and batteries.
Approval: UL and cUL classified intrinsically safe
in Class I, Div. 1 Groups A, B, C, D T6, ATEX, CE
86538-02
Catalog
number
Sensor Range Resolution
Alarm set points
Price
Low High
RZ-86538-04 O
2
0 to 30% 0.1% 19.50% 23.50%
RZ-86538-00 CO 0 to 500 ppm 1 ppm 35 ppm 200 ppm
RZ-86538-02 H
2
S 0 to 100 ppm 1 ppm 10 ppm 20 ppm
RZ-86538-06 SO
2
0 to 20 ppm 0.1 ppm 2 ppm 10 ppm
RZ-86538-08 NO 0 to 250 ppm 1 ppm 25 ppm 50 ppm
RZ-86538-10 NO
2
0 to 20 ppm 0.1 ppm 1 ppm 10 ppm
RZ-86538-12 Cl
2
0 to 10 ppm 0.1 ppm 0.5 ppm 5 ppm
RZ-86538-14 HCN 0 to 100 ppm 1 ppm 4.7 ppm 50 ppm
RZ-86538-16 NH
3
0 to 50 ppm 1 ppm 25 ppm 50 ppm
Specifications
Alarm: 90 dB at 4 in. (audible/visible/vibrating)
Sensor life: 2 years
Functions: high/low, STEL, TWA, peak,
low-battery indicator
Display: LCD
Power: two AA lithium batteries
Battery life: 2 years
Dimensions: 2"W x 3
1
2"H x 1"D
Instrument wt: 3.6 oz (0.1kg)
GasAlertClip
Multigas Detector
Performance of a multigas monitor with the feel and simplicity of a single-gas monitor
l
Simple single-button operation
l
Simple automatic calibration procedure
Lightweight, compact monitor is designed with a rugged housing with concussion-proof
boot for your most demanding work environments. Continuous LCD shows simultaneous
gas concentrations for H
2
S, CO, O
2
, and combustibles. Features four alarm levels: instant
low and high alarm level for all gases, TWA and STEL for CO and H
2
S, and an over-limit
alarm. A 95 dB alarm tone, bright alarm bars, and internal vibrating alarm are ideal for
high-noise areas. Features a standard datalogger (16 hours) and event logger (10 events)
to record TWA, STEL, and maximum exposure to gas and displays on command.
Approval: CSA Class I, Div. 1, Groups A, B, C, D; CE; ATEX
Whats included: belt clip, calibration hose/cap, and lithium polymer battery.
Confined-space kit includes IR connectivity kit, aspirator pump, 10-ft sampling hose,
calibration hose, 34-L gas cylinder, regulator, and hard carrying case.
Alarm: 95 dB (audible/visible/vibrating)
Functions: auto calibration, STEL, TWA,
peak readings, auto backlight, user-selectable
field options
Display: backlit LCD
Output: none
Power: lithium poly (included)
Battery life: 14 hours
Dimensions: 2
1
2"W x 4
1
4"H x 1
1
2"D
Instrument wt: 5.6 oz (0.2 kg)
Sensor Range Resolution Accuracy
Alarm set points
Low High
Combustibles 0 to 100% LEL 1% LEL 1% LEL 10% LEL 20% LEL
O2 0 to 30% 0.1% 0.1% 19.5% 23.5%
CO 0 to 500 ppm 1 ppm 1 ppm 35 ppm 200 ppm
H2S 0 to 100 ppm 1 ppm 1 ppm 10 ppm 15 ppm
Specifications
Catalog number Description Price
RZ-86418-20 Compact multigas detector
RZ-86418-22 Compact multigas detector with confined space kit
86418-20
Specifications
GasAlertMax
Four-Gas Detector
Simultaneously view four gas
concentration levels on
easy-to-read LCD
l
Plug-in Versapak
battery is
easy to replace and provides
14 hours of operation
l
Wide-angled alarm bar is
visible from all angles
Detector features internal sampling
pump for remote sampling and
easy one-button control. Order
the confined space kit to ensure
safe entry into a confined space.
Whats included: plug-in replaceable
sensors, two NiMH rechargeable
batteries, two-port charger, 10-ft
sampling hose, and holster with
belt loop. Confined space kit also
includes 34L calibration gas cylinder,
calibration hose, regulator,
and hard carrying case.
Approval:
CSA intrinsically safe
for Class I, Division 1,
Grade A, B, C, and D,
Class I, Zone 0,
Grade IIC;
CENELEC EEx ia IIC.
Alarm: 95 dB (audible/visible)
Functions: auto calibration,
maximum readings, TWA
(Time Weighted Average),
and auto backlight
Display: backlit LCD
Output: none
Power: two NiMH batteries
with 110 VAC charger
Battery life: 12 hours
Dimensions: 3"W x 6"H x 1
1
2"D
Instrument wt: 1 lb (0.5 kg)
Kit 81990-22
tubing, op video,
tool kit, and hard transport case.
Approval: UL and cUL classified intrinsically safe in Class I, Div. 1
Groups A, B, C, and D; EEx ia IIC T4.
RZ-86263-50 Four-gas calibration kit ...................................................
RZ-86263-52 PID calibration kit ............................................................
RZ-86262-50 Lamp cleaning kit ............................................................
Catalog number Description Price
RZ-86263-14 MultiRAE monitor with PID and datalogger
RZ-86263-21 MultiRAE monitor with PID and confined-space kit
86263-14 with
protective boot
Specifications
Sensor Range Resolution
Alarm set points
Low High
Combustibles 0 to 100% LEL 1% LEL 10 LEL 20% LEL
O
2
0 to 30% 0.1% 19.5% 23.5%
CO 0 to 500 ppm 1 ppm 35 ppm 200 ppm
H
2
S 0 to 100 ppm 1 ppm 10 ppm 20 ppm
PID (VOCs)
0 to 200 ppm,
200 to 2000 ppm
0.1 ppm,
1 ppm
50 ppm 100 ppm
Gas Detection, Multigas / PID
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
14
Air/Gas Analysis
AI
Specifications for ToxiRAE Plus Personal PID
Alarm: 90 dB, auto shut off pump at
low-flow condition
Functions: instantaneous, average,
Short Term Exposure Limit (STEL),
and peak value; battery voltage;
elapsed time
Display: alarm, darkness, or manually
activated backlighted LCD
Detector lamp: 10.6 eV
Output: serial (datalogging model only)
Power: rechargeable NiMH battery
or four AA alkaline batteries
(not included)
Battery life: 10 hours
Dimensions: 8
1
4"L x 3"W x 2"H
Instrument wt: 19 oz (0.6 kg)
Alarm: 90 dB buzzer and flashing red
LED patterns indicate exceeded
preset limits: high, low, and Short
Term Exposure Limit (STEL) or
Time Weight Average (TWA)
Functions: STEL and TWA values of
toxic and VOC gases; programmable
alarm; battery voltage; elapsed time
Display: 8-digit LED
Detector lamp: 10.6 eV
Output: serial (datalogging model only)
Power: rechargeable NiCd battery or
two AA alkaline batteries
(not included)
Battery life: 10 hours
Dimensions: 6"L x 1
3
4"W x 1"H
Instrument wt: 6.4 oz (0.2 kg)
Accessories for All Detectors
RZ-86263-52 PID calibration kit includes 100-ppm
isobutylene, 34-liter cylinder, and regulator with adapter .................
RZ-86262-50 Lamp cleaning kit ............................................................
RZ-86264-50 Automotive power adapter ............................................
RZ-09376-01 Batteries, AA. Pack of 4 ............................................ /pk
ToxiRAE Plus Personal PID
Both models include rechargeable
NiCd battery, single-unit charging
station, 110 VAC battery charger,
alkaline battery adapter for two
AA batteries, and calibration
adapter with tubing.
Standard Detector features
two operation modes
operate in display mode to
view instantaneous, STEL, TWA,
and peak readings; use password-
protected program mode to
ensure secure alarm and calibration settings.
Datalogging Detector has the same features as the standard
model, plus 4000-reading datalogging with time/date stamp and
programmable, manual, periodic, or scheduled start/stop. Includes
software for Windows
98 software .....................
Accessories
Catalog number Range Resolution Accuracy Price
CO
2
monitor
RZ-81973-20 0 to 50,000 ppm (0 to 5%) 100 ppm (0.01%) 5% reading or 50 ppm
CO
2
analyzer
RZ-81973-00 0 to 10,000 ppm 10 ppm 5% reading or 100 ppm
CO
2
incubator monitor
RZ-81973-10 0 to 50% 0.01% to 3%, 0.1% above 3% 5% reading or 300 ppm
Whichever is greater
Specifications
Alarm: audible/visible
Display: backlit LCD
Dimensions: 2
5
8"W x 5
1
2"H x
13
16"D
Instrument wt: 1.7 lb (0.7 kg)
Power: one NiCd rechargeable battery
with 110/240 VAC charger (included)
Battery life: 8 hours
81973-20
81973-10
Carbon Dioxide Meters
Rapid detection of changing CO
2
levels
l
Maintenance-free pressure and temperature compensated sensor
l
Ideal for IAQ surveys, food packaging, ventilation verification, and incubator checks
CO
2
Monitor is a compact and lightweight detection device that immediately responds
to excessive levels of CO
2
ideal for personal monitoring. Meter features a maintenance-
free infrared sensor and audible/visible alarms that respond intermittently to CO
2
concentrations above 5000 ppm and continuously to concentrations above 10,000 ppm.
CO
2
Analyzer features a dual wavelength pressure and temperature compensated
sensor for fast, accurate CO
2
measurement. Built-in datalogger stores up to 850
readingsideal for indoor air quality surveys and ventilation checks. Audible/visual
alarm responds intermittently to CO
2
concentrations above 5000 ppm and continuously
to concentrations above 10,000 ppm.
CO
2
Incubator Monitor provides fast, accurate CO
2
level monitoring. Features a powerful
internal pump for extracting samples; two sampling modes, sample draw and diffusion;
integral fan; and maintenance-free dual wavelength pressure and temperature compensated
sensors. Keep records of your CO
2
levels with the built-in datalogging feature. Choose to
log your readings continuously or with the manual snapshot mode. Nonvolatile memory
holds approximately 100 snapshot readings and 800 sets of continuous datalogged readings.
Download stored readings to your PC for storage or analysis via the infrared data link.
Alarm features a variable pitched tone to indicate CO
2
levels.
Whats included: one 8-hour continuous-use NiCd battery with 110/240 VAC charger.
Model 81973-10 also includes a sampling probe and hose assembly.
Alarm: adjustable audible/visible
Display: backlit LCD with graphic display
Operating temperature: 40 to 140F (40 to 60C)
System requirements: Windows
95 or above
Output: RS-232, 0 to 1 VDC
Data storage: 2700 points
Power: rechargeable NiMH battery
with 115 VAC adapter
Dimensions: 3
1
8"W x 7
7
8"H x 1
5
8"D
Instrument wt: 2 lb (0.9 kg)
Specifications
86437-00
Catalog number Range Resolution Accuracy Price
RZ-86437-00 0 to 2000 ppm 1 ppm 20 ppm CO2 + 2% of reading
RZ-86437-02 0 to 20% 0.01% 0.02% CO2 + 2% of reading
l
Intuitive, menu-driven display with shortcut buttons for easy operation
l
Quickly store and datalog up to 2700 readings
Low-maintenance, high-accuracy CO
2
sensor only requires calibration every two years.
Backlit display shows reading both numerically and graphicallystore data in memory
or download to PC via RS-232. Includes a second probe portorder optional temperature/
humidity probe to expand measurement capabilities (sold separately below).
Ideal for applications including: laboratory fume hood checks, industrial hygiene studies,
spot measurement of food and beverage storage/lines, and HVAC monitoring.
Whats included: CO
2
probe, rechargeable battery with 115 VAC adapter, software,
RS-232 cable, and manual.
Approval: Meter: IP54; Probe: IP65 (NEMA 4), CE
Compliance: EN 61326-1:1997 for electromagnetic compatibility
RZ-37301-90 Optional temperature/humidity probe ...................................................................
Datalogging Carbon Dioxide Meters
Silicone-based infrared sensor ensures superior stability over time and temperature
Air Quality, Carbon Dioxide
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
16
Air/Gas Analysis
AI
Air Quality Meters
Simultaneously monitor temperature, humidity, carbon dioxide, and carbon monoxide
l
Easy, menu-driven operationno training required
l
User-selectable alarm settings to alert operator when readings reach the programmed level
Versatile monitors combine the basic functionality of a temperature/humidity meter with
expanded gas monitoring capabilities for your most complete portable IAQ tool. These
compact, multiparameter instruments are ergonomically designed for handheld use or use
the flip-out stand for stand-alone monitoring. Audible, visible, and internal vibrating alarms
indicate when readings reach a particular levelyou can step away from the instrument
during testing.
Whats included: RTD probe, rechargeable lithium ion battery with 115 VAC charger/adapter,
manual, and soft carrying case. Datalogging model also includes software.
Alarm: 85 dB/red LED (audible/visible) and
internal vibrating alarm
Display: backlit, multiparameter LCD
Operating temperature:
4 to 122F (20 to 50C)
Power: rechargeable 16-hour lithium ion battery with
115 VAC charger/adapter (included)
Battery life: 16 hours
Dimensions: 3
1
2"W x 6
11
16"H x 1
1
2"D
Instrument wt: 15 oz (0.4 kg)
Specifications
Catalog number Description Price
RZ-86439-00 Air quality meter
RZ-86439-10 Air quality meter with datalogging
Parameter (sensor) Range Resolution Accuracy
CO
2
(infrared) 0 to 250 ppm; 0 to 500 ppm (selectable) 1 ppm 3% of reading
CO (electrochemical) 0 to 500 ppm; 0 to 10,000 ppm (selectable) 1 ppm 3% of reading
Temperature (RTD) 32 to 104F (O to 40C) 0.1F (0.1C) 0.2F (0.1C)
RH (capacitive polymer) 0 to 95% 1% 2% of reading
86439-01
Features one-button
calibration
RZ-93831-70 Optional RTD probe for
secondary temperature ..........................................................................
RZ-86384-50 Calibration kit for 86384-01 .............................................
RZ-86384-51 Calibration kit for 86384-11 .............................................
RZ-09376-01 Replacement batteries, AA. Pack of 4 ..................... /pk
IAQ-Calc
Meters
Easy-to-use keypad scrolls through all readings at the touch of a button
l
Low-drift NDIR CO
2
sensor gives stable, accurate readings
l
Check building IAQ conditions to optimize productivity
l
Ideal for testing HVAC system performance
The IAQ-Calc CO
2
Meter provides cost-
effective CO
2
measurements. The sampling
function records multiple point
measurements.
The IAQ-Calc Advanced IAQ Meter
calculates % outside air from either
CO2 or temperature readings and
directly calculates dew point,
wet bulb temperature, absolute
humidity, and humidity ratio. The
dual-line display simultaneously
displays multiple parameters.
Datalogger logs up to 26,900
samples with time/date stamp.
The included LogDat2 software
permits easy transfer of data to
your computer and the LogDat2
Companion for Excel
automatically
graphs all your data.
Whats included: NIST-traceable
certificate, carrying case, and
batteries. Model 86384-15 also
includes probe and AC adapter.
Catalog number Description Price
RZ-86384-05 IAQ-Calc CO2 meter (measures CO2 only)
RZ-86384-15 IAQ-Calc advanced IAQ meter
Specifications
Display: multiparameter LCD
Operating temperature:
41 to 158F (5 to 70C)
System requirements: Windows
3.1
or Windows 95 or higher
Power: four AA batteries (included)
or 115 VAC adapter
(included with 86384-11)
Dimensions: 4"W x 6
11
16"H x 1
1
2"D
Instrument wt
Model 86384-01: 12 oz (0.4 kg)
Model 86384-11: 17 oz (0.5 kg)
5 to 95% 0.1% 2%
Temperature
32 to 140F
(0 to 60C)
0.1F
(0.1C)
1.0F
(0.6C)
% outside air
0 to 100% 0.1%
86384-11
GO
to page(s)
731748
For our complete line of humidity products,
go to pages 731748
Air Quality, IAQ Meters
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
17
Air/Gas Analysis
AI
RZ-86316-61 Ozone calibrator (0.1 ppm) ..............................................................................................
86316-30
Pocket Ozone Detector
Accurate, easy-to-read digital display
l
Versatile meter can be used for fixed or portable monitoring
l
Ideal for leak checks in generators, valves and piping
The heated metal oxide semiconductor has a range of 0.02 to 10 ppm; digital readout is in 0.01
ppm increments. Use as a permanent monitor indoors when the concentration average is below
0.1 ppm; use outdoors or at concentrations up to 10 ppm for short periods of time. Includes
rechargeable batteries, charger, and carrying case.
Order optional calibrator to verify that your ozone monitor is conforming to the original calibration.
Calibrator recalibrates detector at 0.1 ppm. It measures 2
1
4"W x 3
3
4"H x 1"D and includes a 9 V battery.
Display: LCD Power: rechargeable batteries with a charger (included) Dimensions: 2"W x 4"H x 1"D
Specifications
RZ-86316-61 Ozone calibrator (0.1 ppm) ...............................................................................................
RZ-09376-04 Replacement battery, 9 V. Pack of four ..................................................................... /pk
Continuous Ozone Monitors
Fixed or portable systems alert workers to hazardous ozone levels
l
Easy-to-read, multicolor graphical display
l
HMOS sensor for superior sensitivity
LED bar graph changes color as ozone levels increase: green indicates a safe level, yellow is caution
level, and red is the danger level. Both models feature a heated metal oxide semiconductor (HMOS)
sensor for excellent sensitivity and quick response time. Order optional calibrator to verify that your
ozone monitors are conforming to their original calibration.
Fixed Ozone Monitor with Alarm has an audio alarm that is triggered at 0.1 ppm (danger level).
Features include a connection for external equipment control. Portable Ozone Monitor can be
permanently installed for on-site use or carried with you to detect leaks throughout your plant.
Display: LED color bar graph
Output: 0 to 3 VDC
Dimensions: 2
3
8"W x 3
1
4"H x 1
3
8"D
Power
Model 86316-10: AC adapter (included)
Model 86316-20: rechargeable eight hour NiMH battery
and an AC adapter/recharger (included)
86316-10
Display 86316-20
Specifications
86487-00
Display: green/red indicator light
Output: 250 VAC, 5 A
Power: 12 to 24 VDC power supply
Dimensions: 3
1
2"W x 3"H x 1
3
4"D
Specifications
RZ-86316-61 Ozone calibrator (0.1 ppm) ..............................................................................................
Ozone Relay Switch
Monitors ozone levels to control ozone generators and alarm relays
l
User adjustable setpointselect appropriate ozone level to meet your needs
l
Ideal for use as leakage alarm in water treatment plants, food storage and processing,
semiconductor manufacturing, and sterilization areas.
Switch is housed in rugged, ABS plastic case that is easily mounted to any wall or inside
air ducts. HMOS sensor detects the presence of ozone in 0.03 to 1 ppm range. Simply
configure alarm set point to desired levelswitch has red visible indicator and activates
relay when level is exceeded. Switch operates on 12 to 24 VDC power supply and features
SPDT nonlatching relay output.
LED provides
visual indication
when ozone level
is exceeded.
Catalog number Description Range Price
RZ-86316-10 Fixed ozone monitor with alarm
0.02 to 0.14 ppm (0.2 to 0.30 or more ppm
with an external data readout)
RZ-86316-20 Portable ozone monitor 0.02 to 0.14 ppm
Catalog number Description Range Price
RZ-86316-30 Ozone detector 0.02 to 10 ppm
Catalog number Description Range Price
RZ-86487-00 Ozone relay switch 0.03 to 1 ppm
Ozone Detectors
Table-of-Contents Web Registration
U.S. Toll-free: 800-323-4340 Outside the U.S.: 847-549-7600 www.coleparmer.com
Canada 800-363-5900 India 91-22-6716-2222 UK 0500-345-300
18
Air/Gas Analysis
AI
86392-00
AirAware Fixed-Gas Monitors
Easy to usesingle button calibration and fresh air zero functions!
l
Bright LCD shows instantaneous concentrations of gas.
l
Broad gas ranges with quality sensors
Low/high alarm settings alert workers of potential gas hazards. Basic monitor plugs easily
into any AC outletno installation required. Models with 4 to 20 mA output have dual
relays to trigger remote alarms/ sirens, turn on fans, or shut down a process.
Approval: CSA
Specifications
Power
Monitors: 120 VAC
Monitors with output: 12 to 24 V AC/DC
Dimensions: 3
1
8"W x 5
1
4"H x 2
5
8"D
Alarm: 85 dB (audible/visual)
Functions: continuous monitoring, one-button calibration,
fresh-air zero
Output: 4 to 20 mA and 5 A SPDT relays (86392-10, -12, -14 only)
Sensor Range Resolution
Alarm set points Monitor Monitor with 4 to 20 mA output
Low High Catalog number Price Catalog number Price
O2 0 to 30% 0.1% 19.5% 23.5% RZ-86392-00 RZ-86392-10
CO 0 to 500 ppm 1 ppm 3 ppm 70 ppm RZ-86392-02 RZ-86392-12
Cl2 0 to 100 ppm 0.1 ppm 0.5 ppm 1 ppm RZ-86392-14
Dimensions:
2
3
8"W x 3
1
2"H x 1
3
8"D
86316-00
Datalogging VOC Detector with Alarm
Prevent health hazards by detecting leaks and poor air quality early
l
Detects acetone, methylene chloride, naphtha, trichloroethylene, and more
l
Ideal for laboratories, paint/print shops, and woodworking facilities
Use this economical VOC detector wherever solvents are present. The sensor is highly
sensitive to VOCs and solvent vapors. The LED bar graph displays the hazard level of gas
or vaporgreen indicates normal, yellow for caution, and red for danger. An audible alarm
also alerts you to dangerous levels. Responds in one minute. A rechargeable NiCd battery
lets you take the detector anywheretrace leaks to their source. Features include a 0 to
2 VDC output for datalogging and a connection for external equipment control.
Display: LED color bar graph
Output: 0 to 2 VDC
Specifications
Power: rechargeable NiCd battery
with an AC adapter/charger (included)
Catalog number Description Range
Price
RZ-86316-00 VOC detector with alarm 50 to 100 ppm