Sunteți pe pagina 1din 4

KSC1815

KSC1815

Audio Frequency Amplifier & High


Frequency OSC
• Complement to KSA1015
• Collector-Base Voltage : VCBO= 50V

1 TO-92
1. Emitter 2. Collector 3. Base

NPN Epitaxial Silicon Transistor


Absolute Maximum Ratings Ta=25°C unless otherwise noted
Symbol Parameter Value Units
VCBO Collector-Base Voltage 60 V
VCEO Collector-Emitter Voltage 50 V
VEBO Emitter-Base Voltage 5 V
IC Collector Current 150 mA
IB Base Current 50 mA
PC Collector Power Dissipation 400 mW
TJ Junction Temperature 125 °C
TSTG Storage Temperature -55 ~ 150 °C

Electrical Characteristics Ta=25°C unless otherwise noted


Symbol Parameter Test Condition Min. Typ. Max. Units
ICBO Collector Cut-off Current VCB=60V, IE=0 0.1 µA
IEBO Emitter Cut-off Current VEB=5V, IC=0 0.1 µA
hFE1 DC Current Gain VCE=6V, IC=2mA 70 700
hFE2 VCE=6V, IC=150mA 25
VCE (sat) Collector-Emitter Saturation Voltage IC=100mA, IB=10mA 0.1 0.25 V
VBE (sat) Base-Emitter Saturation Voltage IC=100mA, IB=10mA 1.0 V
fT Current Gain Bandwidth Product VCE=10V, IC=1mA 80 MHz
Cob Output Capacitance VCB=10V, IE=0, f=1MHz 2.0 3.0 pF
NF Noise Figure VCE=6V, IC=0.1mA 1.0 1.0 dB
RS=10kΩ, f=1Hz

hFE Classification
Classification O Y GR L
hFE1 70 ~ 140 120 ~ 240 200 ~ 400 350 ~ 700

©2002 Fairchild Semiconductor Corporation Rev. A2, September 2002


KSC1815
Typical Characteristics

100 100

VCE=6V
IB = 400µA

IB = 350µA

IC[mA], COLLECTOR CURRENT


IC[mA], COLLECTOR CURRENT

80
IB = 300µA
10
IB = 250µA
60
IB = 200µA

40 IB = 150µA
1
IB = 100µA
20

IB = 50µA

0.1
0 0.0 0.2 0.4 0.6 0.8 1.0 1.2
0 4 8 12 16 20

VCE[V], COLLECTOR-EMITTER VOLTAGE VBE[V], BASE-EMITTER VOLTAGE

Figure 1. Static Characteristic Figure 2. Transfer Characteristic

10000
VBE(sat), VCE(sat)[mV], SATURATION VOLTAGE
IC=10IB
VCE = 6V
hFE, DC CURRENT GAIN

VBE(sat)
1000 1000

100 VCE(sat)

10 10
1 10 100 1000 1 10 100 1000

IC[mA], COLLECTOR CURRENT IC[mA], COLLECTOR CURRENT

Figure 3. DC current Gain Figure 4. Base-Emitter Saturation Voltage


Collector-Emitter Saturation Voltage

100 1000
VCE =6V
f=1MHz
CURRENT GAIN-BANDWIDTH PRODUCT

IE=0
Cob[pF], CAPACITANCE

100
10
fT[MHz],

10

1
1 10 100 1000 0.1 1 10 100

VCB[V], COLLECTOR-BASE VOLTAGE IC[mA], COLLECTOR CURRENT

Figure 5. Output Capacitance Figure 6. Current Gain Bandwidth Product

©2002 Fairchild Semiconductor Corporation Rev. A2, September 2002


KSC1815
Package Dimensions

TO-92
+0.25
4.58 –0.15

4.58 ±0.20

0.46 ±0.10
14.47 ±0.40

+0.10
1.27TYP 1.27TYP 0.38 –0.05
[1.27 ±0.20] [1.27 ±0.20]

3.60 ±0.20
3.86MAX

(0.25)
+0.10
0.38 –0.05
1.02 ±0.10

(R2.29)

Dimensions in Millimeters

©2002 Fairchild Semiconductor Corporation Rev. A2, September 2002


TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.

ACEx™ FACT™ ImpliedDisconnect™ PACMAN™ SPM™


ActiveArray™ FACT Quiet series™ ISOPLANAR™ POP™ Stealth™
Bottomless™ FAST® LittleFET™ Power247™ SuperSOT™-3
CoolFET™ FASTr™ MicroFET™ PowerTrench® SuperSOT™-6
CROSSVOLT™ FRFET™ MicroPak™ QFET™ SuperSOT™-8
DOME™ GlobalOptoisolator™ MICROWIRE™ QS™ SyncFET™
EcoSPARK™ GTO™ MSX™ QT Optoelectronics™ TinyLogic™
E2CMOS™ HiSeC™ MSXPro™ Quiet Series™ TruTranslation™
EnSigna™ I2C™ OCX™ RapidConfigure™ UHC™
Across the board. Around the world.™ OCXPro™ RapidConnect™ UltraFET®
The Power Franchise™ OPTOLOGIC® SILENT SWITCHER® VCX™
Programmable Active Droop™ OPTOPLANAR™ SMART START™

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in significant injury to the user.

PRODUCT STATUS DEFINITIONS


Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative or In This datasheet contains the design specifications for
Design product development. Specifications may change in
any manner without notice.

Preliminary First Production This datasheet contains preliminary data, and


supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete Not In Production This datasheet contains specifications on a product


that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

©2002 Fairchild Semiconductor Corporation Rev. I1

S-ar putea să vă placă și