0 evaluări0% au considerat acest document util (0 voturi)
53 vizualizări1 pagină
This document summarizes the structural analysis of a steel beam (W6X16) with a span of 16.5 feet. The beam is subjected to various roof loads including uniform and point loads. The analysis found that the maximum bending stress ratio was 0.520, which is less than the allowable ratio of 1. The maximum shear stress ratio was 0.113, which is also less than the allowable ratio of 1. Deflections were also within acceptable limits. The beam design was determined to be adequate for the given loading and span conditions.
This document summarizes the structural analysis of a steel beam (W6X16) with a span of 16.5 feet. The beam is subjected to various roof loads including uniform and point loads. The analysis found that the maximum bending stress ratio was 0.520, which is less than the allowable ratio of 1. The maximum shear stress ratio was 0.113, which is also less than the allowable ratio of 1. Deflections were also within acceptable limits. The beam design was determined to be adequate for the given loading and span conditions.
This document summarizes the structural analysis of a steel beam (W6X16) with a span of 16.5 feet. The beam is subjected to various roof loads including uniform and point loads. The analysis found that the maximum bending stress ratio was 0.520, which is less than the allowable ratio of 1. The maximum shear stress ratio was 0.113, which is also less than the allowable ratio of 1. Deflections were also within acceptable limits. The beam design was determined to be adequate for the given loading and span conditions.
ENERCALC, INC. 1983-2011, Build:6.11.6.23, Ver:6.11.6.23
Licensee : Lic. # : File: P:\7) Boccella Residence\Calculations\Enercalc\ROOF BEAMS.ec6 Description : RB13 BENT Calculations per AISC 360-05, IBC 2009, CBC 2010, ASCE 7-05 Material Properties Analysis Method : ksi Bending Axis : Major Axis Bending Load Combination :2009 IBC & ASCE 7-05 Beam bracing is defined as a set spacing over all spans Allowable Stress Design Fy : Steel Yield : 50.0 ksi Beam Bracing : E: Modulus : 29,000.0 Unbraced Lengths First Brace starts at ft from Left-Most support Regular spacing of lateral supports on length of beam =4.0 ft W6X16 Span =16.50 ft W6X16 D(0.28) Lr0.34) D(0.84) Lr1.06) D(0.0805,0) Lr(0.115,0) D(0.028) Lr(0.04) D(0.1225) Lr(0.175) D(0.028) Lr(0.04) Service loads entered. Load Factors will be applied for calculations. Applied Loads Beam self weight calculated and added to loads Load for Span Number 1 Varying Uniform Load : D(S,E) = 0.0140->0.0, Lr(S,E) = 0.020->0.0 ksf, Extent = 0.0 -->> 8.50 ft, Trib Width = 5.750->0.0 ft, (ROOF) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 8.50 -->> 10.50 ft, Tributary Width = 2.0->0.0 ft, (ROOF) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 10.50 -->> 16.50 ft, Tributary Width = 8.750->0.0 ft, (ROOF) Point Load : D = 0.280, Lr = 0.340 k @8.50 ft, (FR 2-RB10 LEFT) Point Load : D = 0.840, Lr = 1.060 k @10.50 ft, (FR 2-RB12 LEFT) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 10.50 -->> 16.50 ft, Tributary Width = 2.0->0.0 ft, (OVERBUILD) Design OK DESIGN SUMMARY Maximum Bending Stress Ratio = 0.520: 1 Load Combination +D+Lr+H Span # where maximum occurs Span # 1 Location of maximum on span 10.478ft 3.677 k Mn / Omega : Allowable 29.192k-ft Vn/Omega : Allowable W6X16 Section used for this span Span # where maximum occurs Location of maximum on span Span # 1 Load Combination +D+Lr+H 32.656 k Section used for this span W6X16 Mu : Applied Maximum Shear Stress Ratio = 0.113 : 1 16.500 ft 15.180k-ft Vu : Applied 0 <240 275 Ratio = 0 <180 Maximum Deflection Max Downward L+Lr+S Deflection 0.393 in 504 Ratio = Max Upward L+Lr+S Deflection 0.000 in Ratio = Max Downward Total Deflection 0.720 in Ratio = Max Upward Total Deflection 0.000 in Location in Span Load Combination Max. "-" Defl Location in Span Load Combination Span Max. "+" Defl Overall Maximum Deflections - Unfactored Loads 1 0.0000 0.000 0.0000 0.000 Load Combination Support 1 Support 2 Vertical Reactions - Unfactored Support notation : Far left is #1 Values in KIPS Overall MAXimum 2.269 3.677 D Only 1.046 1.642 Lr Only 1.224 2.035 D+Lr 2.269 3.677