Documente Academic
Documente Profesional
Documente Cultură
Prepared for:
Engineered Systems & Products
8121 Virginia Pine Court
Richmond VA 23237
Prepared by:
Automation Controls Inc.
200 Main Street
Newport News VA 23601
ACI Job No: 2008-085
Submittal for
Local Control Panel
Table of Contents
B. Datasheets - Power / Control Components
D. Drawings
C. Datasheets - Field Mounted Components
A. Datasheets - Enclosures / Accessories
E. Bill of Materials
F. Manufacturer Source Information
XP PUSHBUTTON
OPERATORS
(MOMENTARY)
EXPLOSION-PROOF/DUST TIGHT
CLASS I, GROUPS B, C & D;
CLASS II, GROUPS E, F & G;
CLASS III;
NEMA TYPE 4, 4X, 7 & 9
UL 698 Industrial Control Equipment for Use
in Hazardous (Classified) Locations.
UL 1203 Explosion-Proof and Dust-Ignition-
Proof Electrical Equipment for Use in
Hazardous (Classified) Locations.
CSA C22.2 No. 30-M1986 Explosion-Proof
Enclosures for Use in Class I Hazardous
Locations.
FEATURES
Operator bodies are black anodized & teflon-
impregnated.
Operating shafts are stainless steel.
3/4-14 NPSM threaded body size.
Explosion-proof operators are suitable for panel or
surface mount applications.
Long Series: Accommodates up to 2 1/2 thick
enclosure wall thickness.
Short Series: Accommodates up to 1 thick
enclosure wall thickness.
Momentary pushbuttons are available in flush and
extended versions.
Momentary pushbuttons are molded thermoplastic
protected by a machined aluminum guard.
Mushroom Pushbuttons are 1 1/2 dia. aluminum.
See Contact Block Information sheet for mounting
and rating information.
Standard Pushbutton, Mushroom Pushbutton- 2 1/2
centers, Jumbo Mushroom-min. 2 5/8 centers.
AKRON ELECTRIC, INC.
Manufacturers of Explosion-Proof Enclosures & Electrical Systems
www.akronelectric.com
1025 Eagon St. Barberton, Ohio 44203 Ph:(330) 745-8891 Fax:(330) 745-2504 Toll Free:(800) 275-2535
e-mail: sales@akronelectric.com
N
E
W
I
N
S
T
O
C
K
Jumbo Jumbo
Contact Button Standard Standard Standard Mushroom Mushroom
Block Color Flush Extended Mushroom (Red) E-Stop (Red)
No Contact Green XPBSFG XPBSEG XPMHSG XPJMSR XPJMSR (e-stop)
Black XPBSFB XPBSEB
Red XPBSFR XPBSER XPMHSR
1 NO Green XPBSFGA XPBSEGA XPMHSGA
(A) Black XPBSFBA XPBSEBA
Red XPBSFRA XPBSERA XPMHSRA XPJMSRA XPJMSRA (e-stop)
1 NC Green XPBSFGB XPBSEGB XPMHSGB
(B) Black XPBSFBB XPBSEBB
Red XPBSFRB XPBSERB XPMHSRB XPJMSRB XPJMSRB (e-stop)
1 NO/1 NC Green XPBSFGC XPBSEGC XPMHSGC
(C) Black XPBSFBC XPBSEBC
Red XPBSFRC XPBSERC XPMHSRC XPJMSRC XPJMSRC (e-stop)
2 NO/2 NC Green XPBSFGP XPBSEGP XPMHSGP
(P) Black XPBSFBP XPBSEBP
300V Red XPBSFRP XPBSERP XPMHSRP XPJMSRP XPJMSRP (e-stop)
2 NO/ 2 NC Green XPBSFG2C XPBSEG2C XPMHSG2C
(2C)(2BLKS) Black XPBSFB2C XPBSEB2C
600V Red XPBSFR2C XPBSER2C XPMHSR2C XPJMSR2C XPJMSR2C (e-stop)
04/16/03
ORDERING INFORMATION
CATALOG NUMBER
Note: For long barrel operators, substitute L for S.
Example: XPBSFG to XPBLFG
LR86146
FILE NO. E139669
FILE NO. E181300
FILE NO. E203605
XPL SERIES
PILOT LIGHTS
EXPLOSION-PROOF/PIGTAIL STYLE
CLASS I, GROUPS B, C & D;
CLASS II, GROUPS E, F & G; NEMA 4, 4X, 7 & 9
Your search for a high quality XP LED pilot
light is over. We make them in our factory
and they are always kept IN STOCK.
660% LONGER LIFE
than ordinary incandescent bulbs
Extended times between relamping
Higher Quality
Better Price
Always IN STOCK
FEATURES
Explosion-Proof Pilot Lights are suitable for panel
or surface mount applications.
Standard sealed construction and can be relamped
from the front by removal of lens cap.
Fully threaded barrel 3/4-14 NPSM threads.
Corrosion and impact resistant diecast aluminum
lens guard.
SPECIFICATIONS:
XPL Pilot Light Series is equipped with bayonet
base receptacles and 12, 24, 48, 120, 240 volt
LED lamps. LED lamps have an operating life
upwards to 100,000 hours @ 25C ambient
temperature. Specify voltage desired.
Factory installed or field installable transfomer,
terminal or finger safe terminal kits available.
Available light bulb colors are Red, White, Blue,
Green & Amber.
Two lengths available:
Long Series Accommodates up to 2 1/2
enclosure wall thickness
Short Series Accommodates up to 1 1/2
enclosure wall thickness
AKRON ELECTRIC, INC.
Manufacturers of Explosion-Proof Enclosures & Electrical Systems
www.akronelectric.com
1025 Eagon St. Barberton, Ohio 44203 Ph:(330) 745-8891 Fax:(330) 745-2504 Toll Free:(800) 275-2535
e-mail: sales@akronelectric.com
N
E
W
I
N
S
T
O
C
K
SELECT BARREL LENGTH
SB= SHORT BARREL, LB= LONG BARREL
SELECT LED LAMP VOLTAGE
12, 24, 48, 120, 240
SELECT COLOR
R= RED, W= WHITE, B= BLUE, G= GREEN, A= AMBER
EXAMPLE: XPL PILOT LIGHT, SHORT BARREL, RED, 120V
XPLSB-120R
03/03/03
LR86146
ORDER INFORMATION
FILE NO. E203605
See price list for replacement parts available.
XP 2 & 3 POSITION
SELECTOR
SWITCHES
EXPLOSION-PROOF/DUST TIGHT
CLASS I, GROUPS B, C & D;
CLASS II, GROUPS E, F & G;
CLASS III,
NEMA TYPE 4, 4X, 7 & 9
UL 698 Industrial Control Equipment for Use
in Hazardous (Classified) Locations.
UL 1203 Explosion-Proof and Dust-Ignition-Proof
Electrical Equipment for Use in Hazardous (Classified)
Locations.
CSA C22.2 No. 30-M1986 Explosion-Proof Enclosures
for Use in Class I Hazardous Locations.
AKRON ELECTRIC, INC.
Manufacturers of Explosion-Proof Enclosures & Electrical Systems
www.akronelectric.com
1025 Eagon St. Barberton, Ohio 44203 Ph:(330) 745-8891 Fax:(330) 745-2504 Toll Free:(800) 275-2535
e-mail: sales@akronelectric.com
N
E
W
I
N
S
T
O
C
K
Contact Operator Position Part
Block Left Right Number
NONE L --- R XP2SS
L >> R XP2RS
L << R XP2LS
1NO L --- R XP2SSA
(A) L >> R XP2RSA
L << R XP2LSA
1NO/1NC L --- R XP2SSC
(C) L >> R XP2RSC
L << R XP2LSC
2NO/2NC L --- R XP2SSP
(P) L >> R XP2RSP
300V (1 BLOCK) L << R XP2LSP
2NO/2NC L --- R XP2SSD
(D) L >> R XP2RSD
600V (2 BLOCKS) L << R XP2LSD
02/12/03
Order Information 2-Position Order Information 3-Position
LR86146
FILE NO. E139669
FILE NO. E181300
FILE NO. E203605
KEY: --- MAINTAINED
>> SPRING RETURNED FROM LEFT
<< SPRING RETURN FROM RIGHT
Explosion-proof selector switches are
suitable for panel or surface mount applications.
Long Series: Accommodates up to 2 1/2 thick
enclosure wall thickness.
Short Series: Accommodates up to 1 thick
enclosure wall thickness.
FEATURES
Selector switch available in 2 or 3 position.
Operator bodies are black anodized
& teflon-impregnated.
3/4-14 NPSM threaded body size.
Operating shafts are stainless steel.
Contact Operator Position Part
Block Left Center Right Number
NONE L --- C --- R XP3SS
L >> C << R XP3CS
L >> C --- R XP3RS
L --- C << R XP3LS
1 NO L --- C --- R XP3SSA
(A) L >> C << R XP3CSA
L >> C --- R XP3RCA
L --- C << R XP3LSA
1 NO/ 1NC L --- C --- R XP3SSC
(C) L >> C << R XP3CSC
L >> C --- R XP3RSC
L --- C << R XPSLSC
2 NO/ 2NC L --- C --- R XP3SSP
(P) L >> C << R XP3CSP
300V (1 BLOCK) L >> C --- R XP3RSP
L --- C << R XP3LSP
2 NO/ 2NC L --- C --- R XP3SSD
(D) L >> C << R XP3CSD
600V (2 BLOCKS) L >> C --- R XP3RSD
L --- C << R XP3LSD
6-21
DE2
Discount
Schedule 3/00
2000 Square D
All Rights Reserved
6
C
I
R
C
U
I
T
B
R
E
A
K
E
R
S
Thermal-Magnetic Molded Case
100 Ampere Frame
Class 650
q FCL 2-pole circuit breaker built using 3-pole module.
j FCL circuit breakers are not rated for 250 Vdc.
F Frame 100 A, Thermal-Magnetic (240 Vac)
Continuous
Current Rating
@ 40C
AC Magnetic
Trip Settings
Standard Interrupting
Terminal
Wire
Range
Hold Trip Catalog Number Price
1-Pole, 120 Vac
15
20
25
30
275
275
275
275
600
600
600
600
FAL12015
FAL12020
FAL12025
FAL12030
$126.
126.
126.
126.
AL50FA
#14-#4 AWG Cu or
#12-#4 AWG Al
35
40
45
50
60
70
80
90
100
400
400
400
400
800
800
800
900
900
850
850
850
850
1450
1450
1450
1700
1700
FAL12035
FAL12040
FAL12045
FAL12050
FAL12060
FAL12070
FAL12080
FAL12090
FAL12100
126.
126.
126.
126.
126.
166.
166.
166.
166.
AL100FA
#14-#1/0 AWG Cu
or #12-#1/0 AWG Al
2-Pole, 240 Vac
15
20
25
30
275
275
275
275
600
600
600
600
FAL22015
FAL22020
FAL22025
FAL22030
$211.
211.
211.
211.
AL50FA
#14-#4 AWG Cu or
#12-#4 AWG Al
35
40
45
50
60
70
80
90
100
400
400
400
400
800
800
800
900
900
850
850
850
850
1450
1450
1450
1700
1700
FAL22035
FAL22040
FAL22045
FAL22050
FAL22060
FAL22070
FAL22080
FAL22090
FAL22100
211.
211.
211.
211.
211.
345.
345.
345.
345.
AL100FA
#14-#1/0 AWG Cu
or #12-#1/0 AWG Al
3-Pole, 240 Vac
15
20
25
30
275
275
275
275
600
600
600
600
FAL32015
FAL32020
FAL32025
FAL32030
$314.
314.
314.
314.
AL50FA
#14-#4 AWG Cu or
#12-#4 AWG Al
35
40
45
50
60
70
80
90
100
400
400
400
400
800
800
800
900
900
850
850
850
850
1450
1450
1450
1700
1700
FAL32035
FAL32040
FAL32045
FAL32050
FAL32060
FAL32070
FAL32080
FAL32090
FAL32100
314.
314.
314.
314.
314.
447.
447.
447.
447.
AL100FA
#14-#1/0 AWG Cu
or #12-#1/0 AWG Al
F Frame 100 A, Thermal-Magnetic (480 Vac)
Continuous
Current
Rating
@ 40C
AC Magnetic
Trip Settings
Standard
Interrupting
Extra High
Interrupting
Terminal
Wire
Range
FC Lugs
Hold Trip
Catalog
Number
Price
Catalog
Number
Price
1-Pole, 277 Vac, 125 Vdc
15
20
25
30
275
275
275
275
600
600
600
600
FAL14015
FAL14020
FAL14025
FAL14030
$159.
159.
159.
159.
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
AL50FA
#14-#4 AWG Cu or
#12-#4 AWG Al
. . .
35
40
45
50
60
70
80
90
100
400
400
400
400
800
800
800
900
900
850
850
850
850
1450
1450
1450
1700
1700
FAL14035
FAL14040
FAL14045
FAL14050
FAL14060
FAL14070
FAL14080
FAL14090
FAL14100
159.
159.
159.
159.
159.
198.
198.
198.
198.
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
AL100FA
#14-#1/0 AWG Cu or
#12-#1/0 AWG Al
. . .
2-Pole, 480 Vac, 250 Vdcjq
15
20
25
30
275
275
275
275
600
600
600
600
FAL24015
FAL24020
FAL24025
FAL24030
$387.
387.
387.
387.
FCL24015
FCL24020
FCL24025
FCL24030
$ 919.
919.
919.
919.
AL50FA
#14-#4 AWG Cu or
#12-#4 AWG Al
CU30FA4
1-#14-#10 AWG
CU only
35
40
45
50
60
70
80
90
100
400
400
400
400
800
800
800
900
900
850
850
850
850
1450
1450
1450
1700
1700
FAL24035
FAL24040
FAL24045
FAL24050
FAL24060
FAL24070
FAL24080
FAL24090
FAL24100
387.
387.
387.
387.
387.
500.
500.
500.
500.
FCL24035
FCL24040
FCL24045
FCL24050
FCL24060
FCL24070
FCL24080
FCL24090
FCL24100
919.
919.
919.
919.
919.
1131.
1131.
1131.
1131.
AL100FA
#14-#1/0 AWG Cu or
#12-#1/0 AWG Al
AL100FA4
1-#14-#3 AWG CU
or
1-#12-#1 AWG AL
3-Pole, 480 Vac, 250 Vdcj
15
20
25
30
275
275
275
275
600
600
600
600
FAL34015
FAL34020
FAL34025
FAL34030
$496.
496.
496.
496.
FCL34015
FCL34020
FCL34025
FCL34030
$1149.
1149.
1149.
1149.
AL50FA
#14-#4 AWG Cu or
#12-#4 AWG Al
CU30FA4
1-#14-#10 AWG
CU only
35
40
45
50
60
70
80
90
100
400
400
400
400
800
800
800
900
900
850
850
850
850
1450
1450
1450
1700
1700
FAL34035
FAL34040
FAL34045
FAL34050
FAL34060
FAL34070
FAL34080
FAL34090
FAL34100
496.
496.
496.
496.
496.
587.
587.
587.
587.
FCL34035
FCL34040
FCL34045
FCL34050
FCL34060
FCL34070
FCL34080
FCL34090
FCL34100
1149.
1149.
1149.
1149.
1149.
1413.
1413.
1413.
1413.
AL100FA
#14-#1/0 AWG Cu or
#12-#1/0 AWG Al
AL100FA4
1-#14-#3 AWG CU
or
1-#12-#1 AWG AL
FAL
1-pole
15-100 Amperes
FAL/FHL
2-pole
15-100 Amperes
FAL/FHL/FCL
3-pole
15-100 Amperes
I-LINE is a Registered Trademark of Square D Company or related companies.
Accessories ...........................................................................Pages 6-376-39
Optional Lugs ........................................................................ Pages 6-40, 6-41
Dimensions ...............................................................................Page 6-45, 6-46
Enclosures ..............................................................................Pages 6-476-50
Catalog Numbering System.............................................................. Page 6-23
Interrupting Ratings (kA)
FAL240 FAL480 FCL
240 V 10 18 (1P), 25 (2, 3P) 100
480 V . . . 18 65
600 V . . . . . . . . .
Thermal-magnetic molded case circuit breakers
shown on Pages 6-21 thru 6-25 are permanent trip UL
Listed, CSA certied, IEC rated, and also meet the
requirements of Federal Specication WC375B/GEN
as indicated on Pages 6-4 thru 6-8. For I-LINE
molded
case circuit breakers, see listings on Pages 8-248-34.
6-41
DE2
Discount
Schedule 3/00
2000 Square D
All Rights Reserved
6
C
I
R
C
U
I
T
B
R
E
A
K
E
R
S
Molded Case Lugs
Class 690
f Unless otherwise specied, wire sizes apply to both aluminum and copper conductors.
k All P-frame circuit breakers require terminal pads for mounting lugs of any type. See Page 6-40.
t These lug kits cannot be used on I-LINE
circuit breakers.
Power Distribution Connectors for Circuit Breakers for Field Replacement of Mechanical Lugs
UL Listed Field-installable VERSAtile Lug Kits
Circuit Breaker
Type
VERSAtile
System Rangef
Dimension
A
(In)
VERSA-
CRIMP
Tool Type
Max.
Lugs
Per
Terminal
Kit
Catalog
Number
Lug
Qty.
Per Kit
Price
Per
Kit
Aluminum Compression Lug Kits
EDB, EGB, EJB,
FD, FG, FJ
#8-#1/0 AWG 1.375 VC-6 Series 1 VC100FD 3 $ 65.
FA, FH, FC, FI #8-#1/0 AWG 1.3 VC-6 Series 1 VC100FA 3 65.
KA, KH, KC, KI #4 AWG-300 kcmil 1.5 VC-6 Series 1 VC250KA3 3 123.
KA, KH, KC, KI 250-350 kcmil 1.5 VC-6 Series 1 VC250KA35 3 123.
LA, LH, Q4 250-350 kcmil 1.25 VC-6 Series 2 VC400LA35 2 123.
LA, LH, Q4 #4 AWG-300 kcmil 1.0 VC-6 Series 2 VC400LA3 2 123.
LA, LH, Q4 #2/0 AWG-500 kcmil 2.2 VC-6 Series 1 VC400LA5 1 60.
LA, LH, Q4
500-750 kcmil Al or 500
kcmil Cu
2.5
VC-6 FT or
VC-8
1 VC400LA7 1 82.
LC, LI, LE, LX, LXIt #4 AWG-300 kcmil 1.05 VC-6 Series 2 VC600LI3 2 83.
LC, LI, LE, LX, LXIt #2/0 AWG-500 kcmil 3.20 VC-6 Series 2 VC600LI5 2 85.
LC, LI, LE, LX, LXIt 500-750 kcmil 3.45
VC-6FT or
VC-8C
1 VC600LI7 1 85.
ME2, MX2 #4 AWG-300 kcmil 1.5 VC-6 Series 1 VC250ME3 3 123.
ME2, MX2 250-350 kcmil 1.5 VC-6 Series 1 VC250ME35 3 123.
ME4, MX4 #2/0 AWG-500 kcmil 2.2 VC-6 Series 1 VC400ME5 1 60.
ME4, MX4
500-750 kcmil Al or 500
kcmil Cu
2.5
VC-6 FT or
VC-8
1 VC400ME7 1 82.
MA, MH, ME, MX #2/0 AWG-500 kcmil 1.9 VC-6 Series 2 VC600MA5 2 186.
MA, MH, ME, MX
500-750 kcmil Al or 500
kcmil Cu
2.1
VC-6 FT or
VC-8
2 VC800MA7 2 198.
NA, NC, NE, NX #2/0 AWG-500 kcmil 3.3 VC-6 Series 4 VC1200NE5 4 598.
NA, NC, NE, NX
500-750 kcmil Al or 500
kcmil Cu
3.6
VC-6 FT or
VC-8
4 VC1200NE7 4 598.
PAF, PHF, PXF, PEFk #2/0 AWG-500 kcmil k VC-6 Series 6-8 VC2000PA5 1 61.
PAF, PHF, PCFk
PXF, PEF
500-750 kcmil Al
or 500 kcmil Cu
k
VC-6 FT or
VC-8
6-8 VC2500PA7 2 61.
Copper Compression Lug Kits
EDB, EGB, EJB,
FD, FG, FJ
#6-#1/0 AWG 1.375 VC-6 Series 1 CVC100FD 3 $ 65.
FA, FH, FC, FI #6-#1/0 AWG Cu 1.4 VC-6 Series 1 CVC100FA 3 65.
KA, KH, KC, KI #2/0 AWG-300 kcmil Cu 1.5 VC-6 Series 1 CVC250KA3 3 124.
LA, LH, Q4 #2/0 AWG-300 kcmil Cu 1.3 VC-6 Series 2 CVC400LA3 2 124.
LA, LH, Q4 250-500 kcmil Cu 2.3 VC-6 Series 1 CVC400LA5 1 60.
LC, LI, LE, LX, LXIt 250-500 kcmil 3.20 VC-6 Series 1 CVC600LI5 1 85.
ME4, MX4 250-500 kcmil Cu 2.6 VC-6 Series 1 CVC400ME5 1 60.
MA, MH, ME, MX 250-500 kcmil Cu 2.4 VC-6 Series 2 CVC600MA5 2 186.
NA, NC, NE, NX 250-500 kcmil Cu 3.3 VC-6 Series 4 CVC1200NE5 4 599.
NA, NC, NE, NX 500-750 kcmil Cu 3.6 VC-6 Series 4 CVC1200NE7 4 599.
Can be used for multiple load connections on one circuit breaker. Use in place of
standard distribution blocks to save space and time.
Field-installable kits, including tin plated aluminum connectors and all necessary
mounting hardware are available for Square D FA, KA, LA, Q4, MA, ME and MX
molded case circuit breakers.
Connectors are UL Listed:
For use on OFF end of circuit breaker when the OFF end is the load end.
For use in UL508 Industrial Control applications only.
For copper wire only.
q Not for use with I-LINE mounted circuit breakers.
u When using ne stranded wire, increased cross sectional area may cause maximum wire size to be reduced.
Use
With
Circuit Breakerq
Cicuit
Breaker
Ampere
Rating
Number of Wires
Per Terminal
& Wire Rangeu
Catalog
Number
Lug
Quantity
Per Kit
Dimension
A
(In.)
Price
Per
Kit
FAL, FHL, FCL
15-100 6-#14-#6 AWG Cu PDC6FA6 3 1.0 $ 58.
15-100 3-#14-#2 AWG Cu PDC3FA2 3 1.2 58.
KAL, KHL
70-250 6-#14-#4 AWG Cu PDC6KA4 3 1.0 109.
70-250
2-#14-#1 AWG Cu
1-#12-#2/0 AWG Cu
PDC3KA20 3 1.5 109.
LAL, LHL, Q4L
125-400
6-#12-#2/0 AWG Cu
12-#14-#4 AWG Cu
PDC6LA20
PDC12LA4
1
1
2.25
1.25
82.
125-400
3-#14-#2 AWG Cu
1-#2-250 kcmil Cu
PDC4LA250 1 2.0 82.
MAL, MHL,
MEL, MXL
125-1000
6-#12-#2/0 AWG Cu
12-#14-#4 AWG Cu
PDC6MA20
PDC12MA4
1
1
0.0
0.0
82.
FAL Circuit Breaker
With Three PDC6FA6 Installed.
MAL Circuit Breaker
With Three PDC6MA20 Installed
CVC100FA VC250KA3 CVC400LA5 VC400LA7
PDC6FA6
PDC6KA4
PDC12LA4
VERSA-CRIMP and I-LINE are Registered Trademarks of Square D Company.
VERSAtile is a Trademark of Square D Company.
Extremity
of
Molded Case
w/Mechanical
Lugs
A See Table
Crimp lug or
power distribution connectors
extension past
end of
circuit breaker
A See Table
VC1200NE5
CVC600MA5
2001 Schneider Electric All Rights Reserved 1
Bulletin No. 8291-0014D
October 2001
Raleigh, NC USA
The SDSA1175 Secondary Surge Arrester is designed and listed for
indoor or outdoor installation and surge protection of single-phase three-
wire 120/240 Vac 60 Hz electrical services and major appliances. Two
SDSA1175 Secondary Surge Arresters can be installed to provide
protection on 208Y/120 Vac three-phase four-wire services.
NOTE: Use on solidly grounded systems only.
CAUTION
HAZARD OF EQUIPMENT DAMAGE.
Megger
covers installed.
f Dimensions with fuse pullers installed.
Field Installed Fuse Options
Primary and Secondary Fusing
Primary Fusing
Factory Installed Secondary Fuse Clips
D1:240 x 480-120
Field-Installable Secondary Fuse Clips
c SF41 can be installed on the following voltage codes: D1, D5, D24, D3, D4,
D51, D2, D23, D14, D25, D20, D95, D19.
UL/CSA
VA
CE VA Type
D1a
240 X 480
120
I
D2
240 x 480
24
I
D3
208
120
I
D5a
600
120
I
D20
208/230/460
115
II
D23
120/240
24
I
50 50 TF50 $ 50.00 $ 56.00 $ 56.00 $ 56.00 $ 82.00 $ 56.00
75 75 TF75 56.00 . . . . . . . . . . . . 64.00
100 100 TF100 61.00 70.00 70.00 70.00 89.00 70.00
150 150 TF150 65.00 84.00 84.00 84.00 109.00 84.00
200 200 TF200 77.00 . . . . . . . . . 134.00 89.00
250 160 TF250 87.00 . . . . . . . . . . . . 116.00
300 200 TF300 95.00 129.00 129.00 129.00 166.00 129.00
350 250 TF350 100.00 . . . . . . . . . . . . 131.00
500 300 TF500 120.00 158.00 158.00 158.00 185.00 158.00
750 500 TF750 161.00 . . . . . . . . . . . . . . .
1000 630 TF1000 194.00 . . . . . . . . . . . . . . .
1500 1000 TF1500 269.00 . . . . . . . . . . . . . . .
2000 1500 TF2000 324.00 . . . . . . . . . . . . . . .
VA Key
Figure A B C Dq E F Gf SLOT
I II III
25 VA . . . . . . 3 3.09 3.00 4.00 3.84 2.00 2.50 4.20 .20 x .38
. . . . . . 25 VA 3 4.00 3.43 4.00 4.80 2.00 2.50 4.20 .20 X .48
50 VA 25 VA . . . 3 3.09 3.00 4.00 3.84 2.00 2.50 4.20 .20 x .38
. . . . . . 50 VA 3 4.19 3.43 4.25 4.99 2.38 2.81 4.45 .20 X .48
75 VA 50 VA . . . 3 3.34 3.38 4.25 4.09 2.38 2.81 4.45 .20 X .48
. . . 75 VA . . . 3 3.59 3.75 4.55 4.34 2.88 3.13 4.75 .20 x .38
. . . . . . 75 VA 3 4.88 3.75 4.55 5.68 2.88 3.13 4.75 .20 x .38
100 VA . . . . . . 3 3.34 3.38 4.25 4.09 2.38 2.81 4.45 .20 X .48
. . . . . . 100 VA 3 4.88 3.75 4.55 5.68 2.88 3.13 4.75 .20 x .38
150 VA 100 VA . . . 3 3.59 3.75 4.55 4.34 2.88 3.13 4.75 .20 x .38
200 VA 150 VA . . . 3 3.59 3.75 4.55 4.34 2.88 3.13 4.75 .20 x .38
250 VA . . . 150 VA 3 5.25 3.75 4.55 6.05 2.88 3.13 4.75 .20 x .38
300 VA 200 VA 200 VA 3 4.70 4.50 5.10 5.50 2.56 3.75 5.30 .20 x .38
350 VA 250 VA 250 VA 3 5.09 4.50 5.10 5.89 3.00 3.75 5.30 .20 x .38
. . . 300 VA . . . 3 5.09 4.50 5.10 5.89 3.00 3.75 5.30 .20 x .38
. . . . . . 300 VA 3 5.46 4.50 5.10 6.26 3.56 3.75 5.30 .20 x .38
500 VA 350 VA . . . 3 5.46 4.50 5.10 6.26 3.56 3.75 5.30 .20 x .38
. . . . . . 350 VA 3 5.46 4.50 5.10 6.26 3.56 3.75 5.30 .20 x .38
750 VA 500 VA 500 VA 3 5.66 5.25 5.73 6.46 3.43 4.38 5.93 .28 X .56
1000 VA 750 VA 750 VA 3 6.04 5.25 5.73 6.84 4.31 4.38 5.93 .28 X .56
1500 VA 1000 VA 1000 VA 3 5.81 7.06 7.46 6.61 4.13 5.81 7.66 .28 X .56
2000 VA 1500 VA 1500 VA 3 7.04 7.06 7.46 7.84 4.56 5.81 7.66 .28 X .56
Type
Type Accessory Key
Description Price
I II III, IV
FB-3A 25-200 25-150 N/A
Three pole fuse block for primary
fusing, accomodates 1-1/2" x
13/32" midget fuse (2 rejection
and 1 non-rejection)
$26.40
FB-3B
250-
2000
200-
1500
25-
1500
Three pole fuse block for primary
and secondary fusing, accomo-
dates 1-1/2" x 13/32" midget fuse
(2 rejection and 1 non-rejection)
26.40
Type
Type Accessory Key
Description Price
I II III, IV
FB-2A 25-200 25-150 N/A
Two pole fuse block for primary
and secondary fusing, accommo-
dates 1-1/2" x 13/32" midget fuse
(2 rejection)
$22.70
FB-2B
250-
2000
200-
1500
25-
1500
Two pole fuse block for primary
fusing, accomodates 1-1/2" x 13/
32" midget fuse (2 rejection)
22.70
UL/CSA VA CE VA Catalog Number Price
50 50 9070T50D1SF41 $ 40.30
100 100 9070T100D1SF41 52.00
150 150 9070T150D1SF41 55.00
250 160 9070T250D1SF41 79.00
500 300 9070T500D1SF41 113.00
750 500 9070T750D1SF41 154.00
Type
Type Accessory Key
Description Price
I II III, IV
SF25A 25-200 25-150 N/A
Secondary fuse block accom-
modates 1-1/4" x 1/4" fuse
$6.60
SF25B
250-
2000
200-
1500
25-
1500
Secondary fuse block accom-
modates 1-1/4" x 1/4" fuse
6.60
SF41Ac 25-200 25-150 N/A
Secondary fuse clip accommo-
dates 1-1/2" x 13/32" midget
fuse
5.40
SF41Bc N/A
200-
2000
25-
2000
Secondary fuse clip accom-
modates 1-1/2" x 13/32" midget
fuse
5.40
FB-1A 25-200 25-150 N/A
One pole fuse block for second-
ary fusing, accomodates 1-1/2"
x 13/32" midget fuse (1 non-
rejection)
15.80
FB-1B
250-
2000
200-
1500
25-
1500
One pole fuse block for second-
ary fusing, accomodates 1-1/2"
x 13/32" midget fuse (1 non-
rejection)
15.80
How to Order:
To Order Specify: Catalog Number
k Class Number
k Type Number
k Voltage Code
k Field Fuse Option
Class Type Voltage Code
9070 TF500 D1
9070 FB-3B
A
D
B
C
G
E
F
FINGERSAFE is a Registered
Trademark of Square D Company
or related companies.
3-21-00
N99238 Rev. A
CC-TRON
FNQ-R
Time-Delay Fuses
1, 600 Volt, to 30 Amps
Form No. FNQ-R
Page 1 of 2
BIF Doc #1014
Bussmann
1.5"
(0.031)
(38.1mm)
.41"
(0.005)
(10.3mm)
Dimensional Data
General Information:
The Bussmann CC-TRON
1-18-00
N99107 Rev. A
Carton Quantity and Weight
Ampere Carton Weight
Ratings Qty Lbs. Kg.
0-30 10 .125 .057
FNM-12
FNM-15
32 Volts AC
FNM-20
FNM-25
FNM-30
-
-
Electrical Ratings (Catalog Symbol and Amperes)
250 Volts AC IR 250 Volts AC IR 250 Volts AC IR 125 Volts AC
1.5"
(0.031)
(38.1mm)
.41"
(0.004)
(10.3mm)
CATALOG SYMBOL: FNM
TIME-DELAY
1/10 TO 30 AMPERES
INTERRUPTING RATING - SEE CHART BELOW
UL LISTED: STD. 248-14, 0-10/250V AC; 12-15/125V AC
FILE #E19180, GUIDE #JDYX
CSA CERTIFIED: 1-10/250V AC; CLASS 1422-01,
12-15/125V AC; FILE 53787
DC RATING: 1-15A rated 125V DC and 1.6 KAIC.
FNM-1/10
FNM-1/8
FNM-15/100
FNM-2/10
FNM-1/4
FNM-3/10
FNM-4/10
FNM-1/2
FNM-6/10
FNM-3/4
FNM-8/10
FNM-1
FNM-1-1/8
FNM-1-1/4
FNM-1-4/10
FNM-1-1/2
FNM-1-6/10
FNM-1-8/10
FNM-2
FNM-2-1/4
FNM-2-1/2
FNM-2-8/10
FNM-3
FNM-3-2/10
FNM-3-1/2
FNM-4
FNM-4-1/2
FNM-5
FNM-5-6/10
FNM-6
FNM-6-1/4
FNM-7
FNM-8
FNM-9
FNM-10
Dual-Element fuse.
If 250V AC is needed for 12-30 amps, use FNW series.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
1
!
DUAL RANGE INPUT (20 mA or 10 VDC)
!
24 VDC TRANSMITTER POWER
!
MAX AND MIN READING MEMORY
!
16 POINT SCALING FOR NON-LINEAR PROCESSES
!
PROGRAMMABLE FUNCTION KEYS / USER INPUTS
!
FOUR SETPOINT ALARM OUTPUTS (W/Plug-in card)
!
COMMUNICATION AND BUS CAPABILITIES (W/Plug-in card)
!
ANALOG OUTPUT SIGNAL (W/Plug-in card)
!
PC SOFTWARE AVAILABLE FOR METER CONFIGURATION
!
9 DIGIT TOTALIZER (INTEGRATOR) WITH BATCHING
!
NEMA 4X/IP65 SEALED FRONT BEZEL
!
EASY STEP BY STEP INSTRUCTIONS
GENERAL DESCRIPTION
The PAXP (PAX Process Input Meter) offers many features and performance
capabilities to suit a wide range of industrial applications. The meter employs
advanced technology for stable, drift free readout, while incorporating features
that provide flexibility now and in the future with plug-in option cards. The
plug-in card options allow the opportunity to configure the meter for present
applications, while providing easy upgrades for future needs.
The Process Meter has two inputs: 0 to 20 mA DC or 0 to 10 VDC. A built-
in 24 VDC supply powers remote transmitters. The meter incorporates a 16-
point input scaling feature for compensation of non-linear processes.
The meter provides a Max and Min reading memory with programmable
capture time. The capture time is used to prevent detection of false max and min
readings which may occur during start-up or unusual process events.
The signal totalizer (integrator) can be used to compute a time-input product.
This can be used to provide a readout of totalized flow, calculate service
intervals of motors and pumps, etc. The totalizer can also accumulate batch
weighing operations.
The meter has four setpoint outputs, implemented on Plug-in cards. The
Plug-in cards provide dual FORM-C relays (5 A), quad FORM-A relays (3 A)
or either sinking or sourcing quad open collector logic outputs. The setpoint
alarms can be configured in modes to suit a variety of control and alarm
requirements.
- High and low absolute, high and low deviation and band acting
- Balanced or unbalanced hysteresis
- On and off delay timers
- Auto reset or latching modes
- Reverse phase output and/or panel indicator
- Selection of alternate list of setpoint values
Plug-in cards also facilitate bus communications. These include RS232,
RS485 and DeviceNet. Readout values and setpoint alarm values can be
controlled through the bus. Additionally, the meter has features that allow a
remote computer to directly control the outputs of the meter. This is useful
during commissioning phases and diagnostic use. With a communication card
installed, set-up software allows configuration from a PC. The configuration
data can be saved to a file for later recall.
A linear DC output signal is available as a plug-in card. The card provides
either 20 mA or 10 V signals. The output can be scaled independent of the input
range.
The features of the linear output cards are:
- Output tracks either input, totalizer, max or min readings
- Programmable output update times
Once the meter has been initially configured, the parameter list may be
locked out from further modification in its entirety or only the setpoint values
can be made accessible.
The meter has been specifically designed for harsh industrial environments.
With NEMA 4X/IP65 sealed bezel and extensive testing of noise effects to CE
requirements, the meter provides a tough yet reliable application solution.
MODEL PAX - 1/8 DIN PROCESS INPUT PANEL METER
DIMENSIONS In inches (mm)
Note: Recommended minimum clearance (behind the panel) for
mounting clip installation is 2.1" (53.4) H x 5" (127) W.
UL Recognized Component,
File #E179259
CAUTION: Read complete
instructions prior to installation
and operation of the unit.
CAUTION: Risk of electric shock.
Bulletin No. PAXP-D
Drawing No. LP0408
Revised 12/00
Tel +1 (717) 767-6511
Fax +1 (717) 764-6587
www.redlion-controls.com
4-4
MicroLogix 1000 / 1761 Controller
System Overview
General Specifications
24V dc Sensor
Power
200 mA max. with 200 F capacitive load max. (for
1761-L10BWA, -L16BWA, -L20BWA-5A, and
-L32BWA only)
Power Cycles 50,000 minimum
Operating Temp. 0 to 55 C (32 to 131 F) for horizontal mounting
0 to 40 C (32 to 104 F) for vertical mounting
Storage Temp. -40 to 85 C (-40 to 185 F)
Humidity 5 to 95% (without condensation)
Shock Operating: 10g peak acceleration (7.5g DIN rail mounted)
1
(111 ms duration), 3 times each direction, each axis
Non-operating: 20g peak acceleration (111 ms duration), 3
times each direction, each axis
Vibration Operating: 5 Hz to 2kHz, 0.381 mm (0.015 in.)
peak-to-peak/2.5g panel mounted
2
, 1hr per axis
Non-operating: 5 Hz to 2 kHz, 0.762 mm (0.030 in.)
peak-to-peak/5g panel mounted, 1hr per axis
Terminal Screw
Torque
0.9 N-m maximum (8.0 pound-inch)
Electrostatic
Discharge
IEC801-2 @ 8 KV
Radiated
Susceptibility
IEC801-3 @ 10V/m, 27M - 1000M Hz
3V/m, 87M - 108M Hz, 174 - 230M Hz, and
470M - 790M Hz
Fast Transient IEC801-4 @ 2 KV Power Supply, 1 KV I/O
Isolation 1500V ac
Memory Type EEPROM
Memory Size 1K words (approximtely 737 instruction words,
437 data words)
1
Relays are derated an additional 2.5g on 32 I/O controllers.
2
DIN rail mounted controller is 1g.
Weight and Dimensions
Cat. No.
1761-
Weight:
kg (lb)
Height:
mm (in.)
Width:
mm (in.)
Depth:
mm (in.)
1
L10BWA 0.2 (0.5)
80 (3 15) 120 (4 72) 40 (1 57)
L10BWB 0.2 (0.5)
80 (3.15) 120 (4.72) 40 (1.57)
L16AWA 0.4 (0.9) 133 (5.24)
L16BWA 0.4 (0.8) 120 (4.72)
L20AWA-5A 80 (3.15) 73 (2.87)
L20BWA-5A 0.6 (1.2)
( ) ( )
L20BWB-5A
( )
200 (7 87)
L32AWA
200 (7.87)
L32BWA 0.6 (1.2) 80 (3.15) 73 (2.87)
L32AAA
( ) ( ) ( )
L16BBB 0.2 (0.5)
80 (3 15) 120 (4 72)
L16BWB 0.2 (0.5)
80 (3.15) 120 (4.72)
40 (1 57)
L32BBB
0 4 (0 8) 80 (3 15) 200 (7 87)
40 (1.57)
L32BWB
0.4 (0.8) 80 (3.15) 200 (7.87)
1
Add approximately 13 mm (0.51 in.) when using the 1761-CBL-PM02 or the
1761-CBL-HM02 communication cable.
Analog Input Specifications
Voltage Range $10.5V 1LSB
Current Range 0-20mA 1LSB
Data Format Natural binary 16-bit signed integer
Voltage Input Impedance 210k W
Current Input Impedance 160k W
Resolution 16 bits (it is also a function of the input filter
selection)
Overall Accuracy 0 to 55 C $0.7% of full scale
Analog Output Specifications
Voltage Range 0-10V 1LSB
Current Range 4-20mA 1LSB
Data Format Natural binary 16-bit signed integer
Step Response 2.5ms @ 95%
Load Range 0-500
Current Output Coding (4-20mA
1LSB, 0-10V 1LSB)
0-32,767
Resolution 15 bits
Overall Accuracy 0 to 55 C $1.0% of full scale
4-6
MicroLogix 1000 / 1761 Controller
MicroLogix 1000 Controller Selection
Catalog Number I/O Digital Inputs Analog Inputs Digital Outputs Analog Outputs
Real
Input Power
Apparent
Input Power
1761-L10BWA 10 6 inputs
24V dc sink/source
0 4 contact outputs 0 13W @ 120V ac
14W @ 240V ac
24VA @ 120V ac
32VA @ 240V ac
1761-L10BWB 10 6 inputs
24V dc sink/source
0 4 contact outputs 0 5W @ 24V dc 5VA @ 24V dc
1761-L16AWA 16 10 inputs
120V ac
0 6 contact outputs 0 7W @ 120V ac
8W @ 240V ac
15VA @ 120V ac
21VA @ 240 ac
1761-L32AWA 32 20 inputs
120V ac
0 12 contact outputs 0 9.1W @ 120V ac
10.6W @ 240V ac
19VA @ 120V ac
25VA @ 240V ac
1761-L16BWA 16 10 inputs
24V dc sink/source
0 6 contact outputs 0 14W @ 120V ac
15W @ 240V ac
26VA @ 120V ac
33VA @ 240V ac
1761-L32BWA 32 20 inputs
24V dc sink/source
0 12 contact outputs 0 15W @ 120V ac
16W @ 240V ac
29VA @ 120V ac
36VA @ 240V ac
1761-L32AAA 32 20 inputs
120V ac
0 10 triac outputs,
120/240V ac
2 contact outputs
0 7W @ 120V ac
9W @ 240V ac
16VA @ 120V ac
22VA @ 240V ac
1761-L16BWB 16 10 inputs
24V dc sink/source
0 6 contact outputs 0 5W @ 24V dc 5VA @ 24V dc
1761-L32BWB 32 20 inputs
24V dc sink/source
0 12 contact outputs 0 7W @ 24V dc 7VA @ 24V dc
1761-L16BBB 16 10 inputs
24V dc
sink/source
0 4 source 24V dc
outputs
2 contact outputs
0 5W @ 24V dc 5VA @ 24V dc
1761-L32BBB 32 20 inputs
24V dc sink/source
0 10 source 24V dc
outputs
2 contact outputs
0 7W @ 24V dc 7VA @ 24V dc
1761-L20AWA-5A 25 12 inputs
120V ac
2 voltage ($10V)
2 current (0-20mA)
8 contact outputs 1 voltage/current
(0-10V, 4-20mA)
12W @ 120V ac
13W @ 240V ac
20VA @ 120V ac
27VA @ 240V ac
1761-L20BWA-5A 25 12 inputs
24V dc sink/source
2 voltage ($10V)
2 current (0-20mA)
8 contact outputs 1 voltage/current
(0-10V, 4-20mA)
18W @ 120V ac
19W @ 240V ac
30VA @ 120V ac
38VA @ 240V ac
1761-L20BWB-5A 25 20 inputs
24V dc sink/source
2 voltage ($10V)
2 current (0-20mA)
8 contact outputs 1 voltage/current
(0-10V, 4-20mA)
7W @ 24V dc 10VA @ 24V dc
4-7
MicroLogix 1000 / 1761 Controller
MicroLogix 1000 Controller Selection
Transformer Load Memory Size
Timers/ Counters
Maximum
Program Scan
Time/Kword I/O Scan Time
Communication
Port Catalog Number
33VA @ 120V ac
35VA @ 240V ac
1K words
(approximately 737
instr ction words; 437
40 timers;
32 counters
fixed
2ms (typical) 0.21ms (typical) RS-232-C (Can be
configured for
comm nic tion thr
1761-L10BWA
not applicable
instruction words; 437
data-table words)
fixed communication thru
1761-NET-AIC in a
DH-485 network)
1761-L10BWB
18VA @ 120V ac
20VA @ 240V ac
DH-485 network)
1761-L16AWA
23VA @ 120V ac
27VA @ 240V ac
1761-L32AWA
35VA @ 120V ac
38VA @ 240V ac
1761-L16BWA
38VA @ 120V ac
40VA @ 240V ac
1761-L32BWA
18VA @ 120V ac
23VA @ 240V ac
1761-L32AAA
not applicable 1761-L16BWB
not applicable 1761-L32BWB
not applicable 1761-L16BBB
not applicable 1761-L32BBB
30VA @ 120V ac
33VA @ 240V ac
1761-L20AWA-5A
45VA @ 120V ac
48VA @ 240V ac
1761-L20BWA-5A
not applicable 1761-L20BWB-5A
DeviceNet Interfaces
Catalog Number /
Product Function Communication Interface
Communication Rates
Supported (bit/s) Current Load
1761-NET-DNI
DeviceNet RS-232-C
Interface
Lets you connect a MicroLogix controller (or other
controller with an RS-232-C port) to the DeviceNet
network. This allows the controller to function as a
DeviceNet slave node to provide 16 words of input
data and 16 words of output data that can be
exchanged with the DeviceNet scanner. This also
allows peer-to peer messaging between controllers.
Lets you connect a PC-compatible computer to the
DeviceNet network for peer-to peer messaging, for
programming, and for on-line monitoring.
Dual-shielded twisted pair
(DeviceNet network)
DeviceNet-
selectable
125k
250k
500k
RS-232-C
selectable
1200
2400
4800
9600
19200
38400
DeviceNet:
0 - 200mA
(@ 11 - 25V)
For more information, see DeviceNet Product Overview, publication DN-2.5.
Bulletin 1492
Accessories
12-174
Mounting Rails
DIN Mounting Rails
Dimensions shown in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
0.218" (5.5 mm) x 0.50" (12.7 mm) slotted mounting holes every 3" (76.2 mm) starting 1.69" (42.9 mm) from end.
Item Description Pcs./Pkg. Dimensions
199-DR1
Symmetrical Rail
35 mm x 7.5 mm
3.28' (1 m) long
Zinc-Plated, Yellow
Chromated Steel
EN50022
DIN #3
10
199-DR4
Heavy Duty
Symmetrical Rail
35 mm x 15 mm
3.28' (1 m) long
Zinc-Plated, Yellow
Chromated Steel
EN50022
DIN #3
5
1492-DR3
Mini 15 mm x 5.5 mm
Rail 3.28' (1 m) long
Zinc-Plated, Yellow
Chromated Steel
EN50045
DIN #2
5
1492-DR5
Symmetrical Rail
35 mm x 7.5 mm
3.28' (1 m) long
Copper-Free
Aluminum EN50022
For 1492 Terminal
Blocks Only
DIN #3
10
1492-DR6
Symmetrical Rail
35 mm x 7.5 mm
2.26" (57.4 mm) high
3.28' (1 m) long
Copper-Free
Aluminum
For 1492 Terminal
Blocks Only
DIN #3
2
1492-DR7
Symmetrical Rail
35 mm x 7.5 mm
2.80" (71.0 mm) high
3.28' (1 m) long
Angled 30
Zinc-Plated,
Chromated Steel
DIN #3
2
0.04
(1.0)
1.97 (50.0) 0.98
(25.0)
0.20
(5.2 )
1.38
(35.0)
1.06
(27.0)
0.30
(7.5)
0.03 R
(0.8)
0.49
(12.5)
#1032 or M5 Recommended Maximum Mounting Screw Size
0.04
(1.0)
1.38
(35.0)
0.94
(24.0)
0.59
(15.0)
0.05 R
(1.2)
0.09
(2.4)
0.98
(25.0)
0.21
(5.3)
0.49
(12.5)
0.59
(15.0)
0.04
(1.0)
0.33
(8.5)
0.22
(5.5)
0.17
(4.3)
0.32
(8.0)
SLOT DETAIL
#832 or M4 Recommended Maximum Mounting Screw Size
0.04
(1.0)
0.30
(7.5)
1.97 (50.0) 0.98
(25.0)
0.22
(5.5)
1.38
(35.0)
1.06
(27.0)
0.49
(12.5)
0.03 R
(0.8)
#1224 or M5 Recommended Maximum Mounting Screw Size
0.875 Dia.
(22.2)
0.75
(19.1)
2.26
(57.4)
6 (152.4) 1.69
(42.9)
1.38
(35.0)
2.26
(57.4)
0.88
(22.4)
0.30
(7.5)
1.14
(29.0)
Wire insulator plug for wire access through rail use Heyco
0.84
(21.3)
1.13
(28.7)
1.87
(47.5)
2.80
(71.0)
30
For mounting rail details, see Cat. No. 199-DR1
Bulletin 1492
IEC Terminal Blocks
12-12
Standard Feed-Through Blocks
May only be used as a marking surface. Cannot be installed over a center jumper.
Cat. no. is not complete. See page 12-173.
1492-W3 1492-W4 1492-W6
Dimensions are not
intended to be used for
manufacturing purposes.
Note: Height dimension is
measured from top of
rail to top of terminal
block.
Specifications Single-circuit terminal block. Single-circuit terminal block. Single-circuit terminal block.
Approvals EEx e II CSA IEC EEx e II CSA IEC EEx e II CSA IEC
Voltage Rating
600V
AC/DC
550V
600V
AC/DC
800V
AC/DC
600V
AC/DC
550V
600V
AC/DC
800V
AC/DC
600V
AC/DC
550V
600V
AC/DC
800V
AC/DC
Maximum Current 20 A 24 A 20 A 24 A 30 A 32 A 30 A 32 A 40 A 41 A 40 A 41 A
Wire Range (Rated Cross Section)
#30-#14
AWG
2.5 mm
2
#22-#14
AWG
0.5-2.5
mm
2
#22-#10
AWG
4.0 mm
2
#22-#10
AWG
0.5-4
mm
2
#22-#10
AWG
6.0 mm
2
#22-#10
AWG
0.5-6
mm
2
Wire Strip Length 0.39" (10 mm) 0.35" (9 mm) 0.47" (12 mm)
Recommended Tightening Torque 5.05.6 lb-in. (0.6 Nm) 5.05.6 lb-in. (0.6 Nm) 5.66.8 lb-in. (0.7 Nm)
Density 61 pcs./ft (200/m) 50 pcs./ft (166/m) 43 pcs./ft (142/m)
Insulation Temperature Range 40+195F (40+90C) 40+195F (40+90C) 40+195F (40+90C)
Terminal Blocks Cat. No.
Pcs./
Pkg.
Cat. No.
Pcs./
Pkg.
Cat. No.
Pcs./
Pkg.
Color: Gray 1492-W3 50 1492-W4 50 1492-W6 50
Red 1492-W3-RE 50 1492-W4-RE 50 1492-W6-RE 50
Blue 1492-W3-B 50 1492-W4-B 50 1492-W6-B 50
Black 1492-W3-BL 50 1492-W4-BL 50 1492-W6-BL 50
Green 1492-W3-G 50 1492-W4-G 50 1492-W6-G 50
Yellow 1492-W3-Y 50 1492-W4-Y 50 1492-W6-Y 50
Orange 1492-W3-OR 50 1492-W4-OR 50 1492-W6-OR 50
White 1492-W3-W 50 1492-W4-W 50 1492-W6-W 50
Brown 1492-W3-BR 50 1492-W4-BR 50 1492-W5-BR 50
Accessories (page 12-172) Cat. No.
Pcs./
Pkg.
Cat. No.
Pcs./
Pkg.
Cat. No.
Pcs./
Pkg.
Mounting Rails:
1 m Symmetrical DIN (Steel) 199-DR1 10 199-DR1 10 199-DR1 10
1 m Symmetrical DIN (Aluminum) 1492-DR5 10 1492-DR5 10 1492-DR5 10
1 m Hi-Rise Sym. DIN (Aluminum) 1492-DR6 2 1492-DR6 2 1492-DR6 2
1 m Angled Hi-Rise Sym. DIN
(Steel)
1492-DR7 2 1492-DR7 2 1492-DR7 2
End Barrier 1492-EB3 50 1492-EB3 50 1492-EB10 50
End Anchors:
DIN Rail Normal Duty
1492-EA35 50 1492-EA35 50 1492-EA35 50
DIN Rail Heavy Duty 1492-EAH35 10 1492-EAH35 10 1492-EAH35 10
Jumpers:
Insulated Side Jumper 1492-SJ5-10 (10-pole) 10
1492-N42 (2-pole)
1492-SJ6-10 (10-pole)
50
10
Center Jumper 50-pole 1492-CJ5-50 5 1492-CJ6-50 5
Center Jumper 40-pole 1492-CJ7-40 5
Center Jumper 10-pole 1492-CJ5-10 10 1492-CJ6-10 10 1492-CJ7-10 10
Center Jumper 3-pole 1492-CJ5-3 10 1492-CJ6-3 10 1492-CJ7-3 10
Center Jumper 2-pole 1492-CJ5-2 10 1492-CJ6-2 10 1492-CJ7-2 10
Center Jumper Link 1492-CJL5 10 1492-CJL6 10 1492-CJL7 10
Center Jumper Cover White 1492-CJCW5 20 1492-CJCW6 20 1492-CJCW6 20
Other Accessories:
Partition Plate 1492-PP3 50 1492-PP3 50 1492-PP10 50
Separation Plate 1492-SP3 50 1492-SP3 50
Test Plug 1492-TP28 10 1492-TP28 10
Test Plug Adapter 1492-TA285 10 1492-TA40 10 1492-TA40 10
Electrical Warning Plate (4-pole) 1492-EWP5-4 10 1492-EWP6-4 10 1492-EWP7-4 10
Group Marking Carrier 1492-GM35 10 1492-GM35 10 1492-GM35 10
Marking Systems:
Snap-in Marker Cards
1492-SM5X9
1492-SM5X12
5 1492-SM6X12 5 1492-SM6X12 5
Individual Marker Tabs
(single char.)
1492-MP5 5 1492-MP 5 1492-MP 5
1.78" (45.3 mm)
1
.
3
8
"
(
3
5
m
m
)
0.20"
(5 mm) 1.78" (45.3 mm)
1
.
3
8
"
(
3
5
m
m
)
0.24"
(6 mm) 1.87" (47.6 mm)
1
.
6
1
"
(
4
1
m
m
)
0.28"
(7 mm)
Bulletin 1492
Accessories
12-188
12
Marking Systems, Continued
Marker Cards
IEC Marking Systems
Marking System Hardware/Software
The Plotter Pen Point, the Adapter, and the Ink are all required for a complete refillable pen. Note: The refillable pen should be used when faster
ink drying times and superior ink adhesion are desired.
Recommended for maintaining refillable pen.
Description Cat. No. Pcs./Pkg.
Plotter Starter Kit
Plotter and Cable
Software
Base Plate:
1492-PLTKIT 1
(6) IEC Spacers
(6) SM5X5 Spacers
(6) SMN Spacers
(4) Disposable Pens
Software 1492-PLSOFT 1
Plotter Pen Point 1492-PLPEN 1
Adapter 1492-PLADAPT 1
Ink 1492-PLINK 1
Cleaning Kit 1492-PLCLEAN 1
Cleaning Solution 1492-PLSOLN 1
Disposable Plotter Pen 1492-DISPEN 4
Entrelec Marking Kit 1492-PLTENTR 1
Phoenix Marking Kit 1492-PLTPHX 1
Wieland Marking Kit 1492-PLTSSWIEL 1
Wago Marking Kit 1492-PLTWAGO 1
Weidmuller Marking Kit 1492-PLTWEID 1
Cat. No. No. of Labels/Card
1492-SM5X5 100
1492-SM5X9 100
1492-SM5X12 100
1492-SM6X9 100
1492-SM6X12 100
1492-SM8X9 100
1492-SM8X12 100
1492-SMN81 100
1492-SMN83 50
Computer System Requirements
Personal computer with 80486 processor
Microsoft Windows version 3.1 or later (for
enhanced performance Windows 95 is
recommended)
8 MB hard disk space
3.5 or 5.25 inch high-density floppy disk
drive
Monitor supported by Windows (VGA or
better)
One open serial communication port
(COM1throughCOM4) for printing markers
Bulletin 1492
Accessories
12-178
End Barriers
IEC
Note: Height dimension of products that mount on rail is from top of rail to top of end barrier.
1492-EB3, 1492-EB3-Y,
1492-EB10, 1492-EB10-Y,
1492-EBM3, 1492-EBM4
Cat. No. A B C
1492-EB3
1492-EB3-Y
1.46"
(37 mm)
1.38"
(35 mm)
0.06"
(1.5 mm)
1492-EB10
1492-EB10-Y
1.77"
(45 mm)
1.61"
(41 mm)
0.06"
(1.5 mm)
1492-EBM3
1.10"
(28 mm)
0.97"
(24.6 mm)
0.06"
(1.5 mm)
1492-EBM4
1.22"
(31 mm)
1.09"
(27.7 mm)
0.06"
(1.5 mm)
1492-EBMD1
1492-EBTS3
A
B
C
1.65" (42 mm)
1
.
3
2
"
(
3
3
.
5
m
m
)
0.06"
(1.5 mm)
2.61" (66.2 mm)
1
.
7
4
"
(
4
4
.
1
m
m
)
0.06"
(1.5 mm)
1492-EB16, 1492-EB35,
1492-EBD4N
Cat. No. A B C
1492-EB16
2.17"
(55 mm)
2.15"
(54.5 mm)
0.08"
(2 mm)
1492-EB35
2.36"
(60 mm)
2.80"
(71 mm)
0.08"
(2 mm)
1492-EBD4N
3.50"
(89 mm)
1.97"
(50 mm)
0.08"
(2 mm)
1492-EBD3
1492-EBTF3
A
B
C
2.44" (62 mm)
1
.
9
1
"
(
4
8
.
6
m
m
)
0.06"
(1.5 mm)
3.51" (89.1 mm)
1
.
7
4
"
(
4
4
.
1
m
m
)
0.06"
(1.5 mm)
1492-EBKD6
1492-EB3TW
1492-EBKD3
2.95" (75 mm)
1
.
9
3
"
(
4
9
m
m
)
0.08"
(2 mm)
1.79" (45.4 mm)
1
.
6
4
"
(
4
1
.
6
m
m
)
0.06"
(1.5 mm)
1.81" (46 mm)
1
.
3
5
"
(
3
4
.
3
m
m
)
0.06"
(1.5 mm)
Bulletin 1492
IEC Terminal Block Accessories
12-146 Visit our website: www.ab.com/catalogs
End Anchors and End Retainers/Partition Plates/Separation Plates
End Anchors and End Retainers
Partition Plates Separation Plates
Dimensions
Width x Length x
Height Used With Color Cat. No.
Pcs/
Pkg
0.005 x 3.15 x 2.48 in
(0.13 x 80 x 63 mm)
1492-JD3, JD3C,
JD3F, JD3DF,
JD3DR, JD3RB,
JD3RC, JD3SS
Gray 1492-PPJD3 20
0.005 x 3.54 x 2.51 in
(0.13 x 90.1 x 63.8 mm)
1492-JD3P,
JDG3P
Natural 1492-PPJD3P 20
0.08 x 1.57 x 1.20 in
(2 x 40 x 30.5 mm)
1492-WM3, WM4,
WMG3, WMG4
Gray 1492-PPM3 50
0.014 x 2.28 x 1.51 in
(0.35 x 58 x 38.3 mm)
1492-WMD1 Gray 1492-PPMD1 50
0.06 x 1.85 x 1.57 in
(1.5 x 47 x 40 mm)
1492-W3, W4,
WG4
Gray 1492-PP3 50
0.06 x 2.17 x 1.81 in
(1.5 x 55 x 46 mm)
1492-W6, W10,
W16S, W4TW,
WG6, WG10S,
WG16S
Gray 1492-PP10 50
0.014 x 2.88 x 1.85 in
(0.35 x 73.2 x 47.1 mm)
1492-WTF3,
WTS3
Natural 1492-PPTS3 50
0.06 x 1.93 x 2.36 in
(1.5 x 49 x 60 mm)
1492-J3, J4, J6,
J10, J2Q, J3TW,
J3F, JG2Q, JG3,
JG3TW, JKD3,
JKD3TP, J3P,
J3PTP, JTC3
Gray 1492-EBJ16 20
Blue 1492-EBJ16-B 20
Yellow 1492-EBJ16-Y 20
Dimensions
Width x Length x
Height Used With Color Cat. No.
Pcs/
Pkg
0.014 x 1.76 x 1.57 in
(0.35 x 44.8 x 40.0 mm)
1492-W3, W4 Natural 1492-SP3 50
Photo
Dimensions
Width x Length x Height
Tightening
Torque Markers
Used
With Color Cat. No.
Pcs/
Pkg
0.31 x 2.20 x 1.85 in
(8 x 56 x 47 mm)
4.4 lbin
(0.5 Nm)
1492-M7X12
1492-M8X5
199-DR1, 199-DR2,
1492-DR4, 1492-DR5,
1492-DR6, 1492-DR7,
1492-DR8, 1492-DR9
Gray 1492-EAJ35 100
0.48 x 2.20 x 2.48 in
(12.2 x 56 x 63 mm)
4.4 lbin
(0.5 Nm)
1492-M7X12
1492-M5X5
199-DR1, 199-DR2,
1492-DR4, 1492-DR5,
1492-DR6, 1492-DR7,
1492-DR8, 1492-DR9
Gray 1492-EAHJ35 50
0.31 x 1.06 x 1.06 in
(8 x 27 x 27 mm)
3.5 lbin
(0.9 Nm)
1492-M5X5 1492-DR3 Gray 1492-EAJ15 50
0.24 x 2.19 x 1.63 in
(6 x 55.6 x 41.5 mm)
1492-M5X10
1492-M5X5
199-DR1, 199-DR2,
1492-DR4, 1492-DR5,
1492-DR6, 1492-DR7,
1492-DR8, 1492-DR9
Gray 1492-ERL35 20
0.20 x 0.96 x 0.75 in
(5 x 24.5 x 19 mm)
1492-M5X10
1492-M5X5
1492-DR3 Gray 1492-ERL15 20
Bulletin_1492_IEC_Terminal_Block_Accessories.qxd 10/02/2004 12:06 Page 12-146
CXJ16246
ON
OFF
TRIP
RESET
200 Main Street Newport News, Virginia 23601
Phn: 757-599-6884, Fax: 757-599-0061
Automation Controls Inc.
Bill of Materials for: Engineered Systems & Products
H-O-A Explosion Proof (220V 1PH 2w 50HTZ) Project Name: ACI Job No: 2008-085
Bill of Material
H-O-A Explosion Proof (220V 1PH 2w 50HTZ) Panel Name: Panel(s)
Tag Qty Mfg Part No Description
Typical of 1
ENCL 1 AKRON CXJ16246 ENCLOSURE,NEMA 7
MCB 1 SD FAL22020 CB,MC,2 P,240V,10KAIC,020A
MCB PDB 1 SD PDC6-FA6 CB DIST LUG KIT,FOR FAL,3 P,600V,WITH (06) 14-6
SP1 1 SD SDSA1175 SURGE ARR,3 W,1 PH,36IN LEADS,120/240V,UL
SP1 1 SD QOSAMK MOUNTING BRACKET FOR SDSA SURGE ARRESTOR
MS-01 1 SD LC1-D25-G7 CONTACTOR,IEC,D LINE,600V,025A,1NO,1NC,120V
OL-01 1 SD LRD-14 OL RELAY,IEC,D LINE,007-10A,1NO,1NC,D09-D32
MS-AUX 1 SD LAD-8N11 AUX CONT,SIDE,1 NO 1 NC,IEC,D9-D38
CB-SP,FM 2 SD QOU110 CB,1 P,240V,10KAIC,010A,DIN MNT
XFMR 1 SD 9070TF-150-D1 XFMR,OPEN,1 PH,WITH FB,240/480V-120V,0150VA
F1,2 2 BUSS FNQ-R1-1/2 FUSE,600V,200KAIC,01.5A,13/32X1-1/2,TD
F3 1 BUSS FNM-1-6/10 FUSE,250V,10KAIC,01.6A,13/32X1-1/2,TD
DI-1 1 RL PAXP-0000-AO METER,PAXP,4-1/2,120V,PAX ASB,4-20mA,4-20mA,NEMA 4X
PLC 1 AB 1761-L20BWA-5A MICROLOGIX 1000,24VDC,12 24VDC IN,8 REL OUT,4 AI,1 AO
PLC 1 AB 1761-L20AWA-5A MICROLOGIX 1000,120V,12 120V IN,8 REL OUT,4 AI,1 AO
TB 1 AB 199-DR1 DIN RAIL,3FT
TB 30 AB 1492-W4 1 TIER,TERMINAL,600V,30A
TBTAGS 60 ACI 1492-SM6X12-ACI 1 TIER,MARKER,BLANK,FOR 1492-W4,W4P
TB 2 AB 1492-EB3 1 TIER,END BARRIER,FOR W4,W4P
TB 6 AB 1492-EAJ35 END ANCHOR
Page 1 of 1
E-Mail: Mail@acin.com
200 Main Street Newport News, Virginia 23601
Phn: 757-599-6884, Fax: 757-599-0061
Automation Controls Inc.
Bill of Materials for Engineered Systems & Products
H-O-A Explosion Proof (220V 1PH 2w 50HTZ Project Name
Manufacturer Data for all Bill of Materials items
Akron Electric Inc
1025 Eagon Street
Barberton OH 44203
Phone: 800-275-2535
Fax: 330-745-2504
Web: www.akronelectric.com
BOM Manufacturer Acronym: AKRON
Manufacturer Data
Allen Bradley
1201 South Second Street
Milwaukee WI 53204
Phone: 414-382-2000
Fax: 414-382-4444
Web: www.ab.com
BOM Manufacturer Acronym: AB
Manufacturer Data
Automation Controls
200 Main Street
Newport News VA 23601-4107
Phone: 757-599-6884
Fax: 757-599-0061
Web: www.acin.com
BOM Manufacturer Acronym: ACI
Manufacturer Data
Page 1 of 2
Bill of Materials for Engineered Systems & Products
H-O-A Explosion Proof (220V 1PH 2w 50HTZ Project Name
Manufacturer Data for all Bill of Materials items
Bussman
PO Box 14460
St Louis MO 63178-4460
Phone: 636-394-2877
Fax: 636-207-4825
Web: www.bussmann.com
BOM Manufacturer Acronym: BUSS
Manufacturer Data
Red Lion
20 Willow Springs Circle
York PA 17402
Phone: 717-767-6511
Fax: 717-764-0839
Web: www.redlion.net
BOM Manufacturer Acronym: RL
Manufacturer Data
Square D
1415 Roselle Road
Palatine IL 60067
Phone: 847-397-2600
Fax: 847-925-7500
Web: www.us.squared.com
BOM Manufacturer Acronym: SD
Manufacturer Data
Page 2 of 2