Documente Academic
Documente Profesional
Documente Cultură
EasyLink Advisor
About This Guide
Online Resources
Most web browsers allow you to enter the web address
without adding the http:// in front of the address. This
User Guide will refer to websites without including http://
in front of the address. Some older web browsers may
require you to add it.
Resource Website
Linksys www.linksys.com
Glossary www.linksys.com/glossary
EasyLink Advisor
Table of Contents
Chapter 1: Installation 1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setup Wizard Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Chapter 2: Use 2
How to Access EasyLink Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
How to Use EasyLink Advisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
EasyLink Advisor ii
Chapter 1 Product Overview
EasyLink Advisor
Chapter 2 Configuration
Preferences Screen
2. In the Details section, give the device a name so you Add a Device
can easily recognize it. (You cannot change the device
type.) When you add a device, it appears with a sunburst icon.
You can click the device to change its details. After you
3. Click Save. update the device details, then the sunburst disappears,
When Advanced View is selected, the Details section may as the device is no longer considered “new” by EasyLink
also offer a login button, depending on the device type. Advisor.
For example, if you want to access the Router’s web‑based
utility, click Log on. (Advanced users can use this utility to View Multiple Devices
configure advanced features of the Router.) If you have more than one computer or other device, then
you have two views available. For example, if you have six
computers, click the arrow button to expand the view of
those six computers, so their names are displayed. (Use the
scroll bar to view all computers.) Click the arrow button
again to minimize the view.
After you have changed its type, the device will appear as
the appropriate icon for the device type, in the appropriate
group, Other Devices or Computers.
EasyLink Advisor
Chapter 2 Configuration
Offline Devices
A device is offline when it is disconnected or powered
off. Any offline device appears as a gray outline and is not
available for selection. To remove an offline device from
the My Network screen, click the device, and then click
Hide Device in the Details section.
Actions Screen
Actions
The Actions screen displays a list of wizards you can run.
You can add computers or other devices to your network,
set up a wireless connection, secure your wireless network,
or replace the current Router.
EasyLink Advisor
Chapter 2 Configuration
Router File
Replace Router Click this link to replace the current
Router. Follow the wizard to transfer the current Router’s
settings to the new Router.
See a list of supported routers Click this link to view a
list of Linksys Routers supported by EasyLink Advisor.
Support
Use the Support screen to view information about your
network, visit the Linksys support site, register products,
and view a list of supported Linksys Routers.
File Menu
Edit
Support Screen
My Network Settings
Details about your network are displayed in this section.
Linksys recommends that you keep a print-out of your
network details for safekeeping. To print these details,
click Print Network Settings.
Supported Products
See a list of supported routers Click this link to view a
list of Linksys Routers supported by EasyLink Advisor. Preferences Screen
In addition to the My Network, Actions, and Support tabs,
• Notifications If you want EasyLink Advisor to play
you have four menus available at the top left-hand corner
notification sounds, select Play notification sounds.
of any EasyLink Advisor screen. You can use these menus
as another way to navigate EasyLink Advisor. • Performance EasyLink Advisor sends its performance
data to Linksys for future enhancements. If you do not
EasyLink Advisor
Chapter 2 Configuration
want EasyLink Advisor to send this data, select Disable Add More Computers to the Network To add more
sending performance data. If you want more details computers, which can be wired or wireless, to your
about the Linksys privacy statement, click Please see network, click this option.
our privacy statement for details.
Add a Device To view the settings you need to add other
To save your changes, click OK. To close the screen without devices to your network, click this option.
making any changes, click Cancel.
Replace Router To replace the current Router, click this
option. Follow the wizard to transfer the current Router’s
View settings to the new Router.
Change Wireless Network Security To change the
wireless security settings of your network, click this option.
Follow the wizard to set up or disable wireless network
security.
Help
View Menu
Tasks Menu