Sunteți pe pagina 1din 414

THE INTEGRATED STEEL MILL

AND SON DUONG PORT FORMOSA HA TINH


(FV1FAA01)

FEASIBILITY STUDY

GEOTECHNICAL INVESTIGATION REPORT


FOR OFFSHORE AREA
REV. 1
(FV1FAA01.TC3.H0.E0.DC)

CLIENT:

PREPARED BY:

FORMOSA HATINH STEEL CORPORATION

PORTCOAST CONSULTANT CORPORATION


Address: 92 Nam Ky Khoi Nghia St., District 1, Ho Chi Minh City, Vietnam
Tel: (84 - 8) 8211486, 9143785;
Fax: (84 - 8) 8216274
Website: http://www.portcoast.com; http://www.portcoast.com.vn
E-mail: portdpt@ hcm.vnn.vn; admin@ portcoast.com.vn

FORMOSA HA TINH STEEL CORPORATION


SOIL INVESTIGATION REPORT
THE INTEGRATED STEEL MILL AND SON DUONG PORT FORMOSA HA TINH
OFFSHORE AREA

THE INTEGRATED STEEL MILL


AND SON DUONG PORT FORMOSA HA TINH
HA TINH, VIET NAM
(FV1FAA01)

FEASIBILITY STUDY
FINAL REPORT

GEOTECHNICAL INVESTIGATION REPORT


FOR OFFSHORE AREA
VOLUME 1/1
(FV1FAA01.TC3.H0.E0.DC.REV.1)

CLIENT:

PREPARED BY:

FORMOSA HATINH STEEL


CORPORATION

PORTCOAST CONSULTANT
CORPORATION

HO CHI MINH CITY

SEPTEMBER, 2009

CNG TY C PHN T VN THIT K CNG K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


SOIL INVESTIGATION REPORT
THE INTEGRATED STEEL MILL AND SON DUONG PORT FORMOSA HA TINH
OFFSHORE AREA

THE INTEGRATED STEEL MILL


AND SON DUONG PORT FORMOSA HA TINH
HA TINH, VIET NAM

FEASIBILITY STUDY
FINAL REPORT

GEOTECHNICAL INVESTIGATION REPORT


FOR OFFSHORE AREA

PREPARED BY

QUALITY MANAGEMENT

SOIL ENGINEERING MANAGER :


GENERAL PROJECT MANAGER :

26-092009

Rev.

Issued

ENG. NGUYEN DUY QUANG


MSc. NGUYEN HONG SON
ME. TRAN QUANG HO
Dr. TRAN TAN VAN
ME. NGUYEN HUU UY VU
Dr. TRUONG NGOC TUONG

Geotechnical
Investigation
Report

Pages

Document

Prepared by

Soil
Quality
Engineering
Management
Manager

CNG TY C PHN T VN THIT K CNG K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

General
Project
Manager

II

GENERAL CONTENTS
Project:

THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA


HA TINH
OFFSHORE AREA

REPORT AND TESTING RESULTS


Number of sheets
PART I: REPORT ............ ............................................................................21
ATTACHMENT A: QUANTITY OF SITE INVESTIGATION .........................01
ATTACHMENT B: GEOTACHNICAL CHARACTERISTICS OF SOIL
LAYER ............................ ..............................................................................05
PART II: APPENDICES IN-SITU & LABORATORY TESTING RESULTS

APPENDIX 1 : LAYOUT OF SOIL INVESTIGATION POINTS........................................... 1

APPENDIX 2 : SOIL PROFILES ......................................................................................... 9

APPENDIX 3 : BORING LOGS ......................................................................................... 76

APPENDIX 4 : PHOTOGRAPHS OF CORE BOX ............................................................ 55

APPENDIX 5 : SUMMARY OF SOIL LABORATORY TESTING RESULTS ................... 26

APPENDIX 6 : SOIL MECHANICAL LAB TEST RESULTS ................................................


APPENDIX 6.1 : OEDOMETER TEST RESULTS.................................................. 44
APPENDIX 6.2 : DIRECT SHEAR TEST RESULTS............................................. 10
APPENDIX 6.3 : UC TEST RESULTS ..................................................................... 5
APPENDIX 6.4 : CU LAB TEST RESULTS........................................................... 47
APPENDIX 6.5 : UU TEST RESULTS ..................................................................... 4

APPENDIX 7 : SUMMARY OF ROCK LABORATORY TESTING RESULTS ................... 2


APPENDIX 7.1 : UC TEST FOR ROCK RESULTS ............................................... 18
APPENDIX 7.2 : DS TEST FOR ROCK RESULTS ............................................... 40
APPENDIX 7.3 : UU TEST FOR ROCK RESULTS ................................................. 8
APPENDIX 7.4 : SLAKE DURABILITY INDEX TEST RESULTS........................... 1

SOIL INVESTIGATION REPORT


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

REPORT OF CONTENTS
1. PURPOSES AND BASES FOR SITE INVESTIGATION WORK ..........................3
1.1. Purposes ...............................................................................................................3
1.2. Bases ....................................................................................................................3
2. QUANTITY OF INVESTIGATION WORK ............................................................4
2.1. In-situ Works .......................................................................................................4
2.2. Laboratory testing ................................................................................................4
3. EQUIPMENTS AND TESTING METHODS ...........................................................4
3.1. In-situ testing .......................................................................................................4
3.1.1. Drilling and sampling of Soil .......................................................................4
3.1.2. Standard Penetration Test (SPT) ..................................................................5
3.2. Laboratory testing ................................................................................................5
3.2.1. Soil laboratory testing...................................................................................5
3.2.2. Rock laboratory testing.................................................................................8
3.3. Data processing and statistical analysis.............................................................10
3.3.1. In-situ testing ..............................................................................................10
3.3.2. Soil laboratory testing.................................................................................11
3.3.3. Rock laboratory testing...............................................................................12
4. SUMMARY ON GEOTECHNICAL CONDITIONS .............................................16
4.1. Elevation reference and bathymetric data..........................................................16
4.2. Geotechnical profile...........................................................................................16
5. GEOTECHNICAL CHARACTERISTICS OF SOIL/ROCK LAYERS .................20
Attachment A Quantity of Soil Geotechical works
Attachment B Geotechnical characteristics of soil layers

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

LIST OF TABLES
Table 5-1: Summary of physical, mechanical properties for soil layers ......................20
Table 5-2: Summary of physical, mechanical properties for rock layers.....................21
Table 5-3: Summary of mechanical properties for rock layers based on Hoek Brown,
and Mohr Coulomb Criterions (dried condition).......................................................21
Table 5-4: Summary of mechanical properties for rock layers based on Hoek Brown,
and Mohr Coulomb Criterions (saturated condition). ...............................................21

LIST OF FIGURES
Figure 3.1: Particle-size test: using sieves ......................................................................5
Figure 3.2: Particle-size test: using hydrometer .............................................................5
Figure 3.3: Liquid limits testing by Casagrande method................................................6
Figure 3.4: The direct shear machine .............................................................................7
Figure 3.5: The oedometer equipment with the data acquisition system to record ........7
Figure 3.6: The triaxial compression test equipment with the data acquisition system
to record and accessories ................................................................................................8
Figure 3.7: The Unconfined compressive test for intact rock equipment with the data
acquisition system to record and accessories..................................................................9
Figure 4.1: Geological Map ..........................................................................................18
Figure 4.2: Distribution of rock formations..................................................................19

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

SOIL INVESTIGATION REPORT OFFSHORE AREA


PROJECT:

THE INTEGRATED STEEL MILL AND SON DUONG PORT


FORMOSA HA TINH
CLIENT:
FORMOSA HA TINH STEEL CORPORATION
LOCATION: HA TINH, VIETNAM

1. PURPOSES AND BASES FOR SITE INVESTIGATION WORK


1.1. Purposes
Site investigation work of The integrated Steel Mill and Son Duong port Formosa Ha
Tinh Project is aimed at giving enough soil parameter data for the foundation design.
1.2. Bases
The basis for site investigation work consists of:
- Based on the contract no. FV1FAA01 between FORMOSA Ha Tinh Steel
Corporation and PORTCOAST Consultant Corporation for the Geotechnical
Investigation in Port and Land areas.
- Based on ASTM standards.

Specification for field tests:.


Test method for penetration test and Split-Barrel Sampling of Soils ASTM D 1586.
Thin Walled tube sampling of soils for Geotechnical purposes ASTM D 1587.
Specification for Soil and Rock laboratory tests:

Standard Practice for Classification of Soils for Engineering


Purposes

ASTM D 2487-06

Standard Practice for Description and Identification of soils

ASTM D 2488-00

Standard Practice for Dry Preparation of Soil Samples for


Particle-Size Analysis and Determination of Soil Constants

ASTM D 421-85

Standard Practice for Particle-Size Analysis of Soils

ASTM D 422-02

Standard Test Method for Liquid Limit, Plastic Limit, and


Plasticity Index of Soils

ASTM D 4318-05

Standard Test Method for Specific Gravity of Soil Solids by


Water Pycnometer

ASTM D 854-02

Standard Test Method for Laboratory Determination of Water


Content of Soil and Rock by Mass

ASTM D 2216-05

Standard Test Method for One-Dimensional Consolidation


Properties of Soils

ASTM D 2435

Standard Test Method for Direct Shear Test of Soils Under


Consolidated Drained Conditions

ASTM D 3080-04

Standard Test Method for Unconfined Compressive Strength of


Cohesive Soils

ASTM D 2166-06

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Standard Test Method for Consolidated Undrained Triaxial


Compression Test for Cohesive Soils

ASTM D 4767-95

Suggested Methods for Determine Basic Physical Properties of


Rock

ISRM No.2, 1972

Suggested Method for Determine Shear Strength of Rock

ISRM No.1, 1974

Standard Test Method for Unconfined Compressive Strength of


Intact Rock Core Specimens

ASTM D 2938-95

Standard Test Method for Unconsolidated Undrained Triaxial


Compression Test for Rock
Standard Test Method for Slake durability Index Test

ISRM
ASTM D 4644

2. QUANTITY OF INVESTIGATION WORK


2.1. In-situ Works
In-situ works were carried out by PORTCOAST including drilling, taking samples
and SPT:
Drilling and taking samples at 42 locations for offshore (boreholes A1-A10, A15A16, AA7, B1- B5, B7, B10-B16, BB3-BB4, BB6, BB8-BB9, C2, C4-C5, CC11, CC3-CC4, D1-D5), 8 locations for onshore (boreholes L1-L7, LL8).
2.2. Laboratory testing
Soil laboratory testing consists of: soil classification tests, determination of strength
characteristics, determination of compression characteristics, indirect parameters from
calculation.
The quantity of in-situ works, soil and rock laboratory testing are shown in Quantity of
Geotechnical works table.

3. EQUIPMENTS AND TESTING METHODS


3.1. In-situ testing
3.1.1. Drilling and sampling of Soil

Based on the stratum and requirement, drilling method was chosen as rotary with
washing by water or bentonite grout.

Drilling equipments:
Equipments used for both boring and SPT as following:
- Drilling machine Wireline KH2 - 120
- Jack - up
- Drilling rods
- SPT tools
- Thin-walled tube for undisturbed samples
- Casing
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

- Bentonite solution

Sampling:
Undisturbed sample: After drilling the borehole to require sample depth, the borehole
is clean (by circulating - washing solution). Lowering the thin-walled tube of 76mm
OD and 60cm length by hammer drop or hydraulic push about 50cm length. Pulling
up the sample, then washing the tube, sealing by wax, labeling the sample with
number and depth transport to the laboratory everyday. Samples were kept in the
shade and avoid from shock.
Taking, packaging samples were carried out in accordance with ASTM-D 1587 and
transported to laboratory in short-term for maintenance and test.
3.1.2. Standard Penetration Test (SPT)

Standard Penetration Testing (SPT) was carried out in accordance with ASTM D
1586-84 with the interval 2m/test after taking UD. The SPT sample was taken by
using rope for dropping the hammer with the weight of 63,5kg (140 lbs), and drop
height of 76cm to penetrate into soil 45cm. Test divided into 3 increments, then
counting the blow count for each increment; the total of last 2 increments is the Nvalue shown in the boring log of this report. Samples in the sampler were used for soil
description and maintained in plastic bag with label of sample number, depth.
Results of SPT are shown in the boring logs - Appendix 03.
3.2. Laboratory testing
3.2.1. Soil laboratory testing
3.2.1.1. Grained size

This test is performed in two stages: sieve analysis for coarse-grained soils
(>0.075mm) and hydrometer analysis for fine-grained soils (< 0.075mm).

Figure 3.1: Particle-size test: using sieves Figure 3.2: Particle-size test: using hydrometer

Results are reported on a combined grain size distribution plot as the percentage of
sample smaller than, by weight, versus the log of the particle diameter. The curve
provides the parameters about effective diameter (D60 & D10) and coefficient of
uniformity (Cu). Tests were performed in accordance with ASTM C136 & D422.
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

3.2.1.2. Moisture content

The moisture content, W, is defined as the ratio of the weight of water in a sample to
the weight of solids. The wet sample is weighed, and then over-dried to a constant
weight at a temperature of about 110oC. The weight after drying is the weight of
solids.
The moisture content is valuable in determining the properties of soils and can be
correlated with other parameters. Tests were performed in accordance with ASTM
D 2216.
3.2.1.3. Atterberg Limit

The liquid limit (LL), plastic limit (PL) is all Atterberg Limits. The liquid limit (LL)
is the moisture content of a soil at the boundary between the liquid and plastic states.
The plastic limit (PL) is the moisture content at the boundary between the plastic and
semi-solid states.
These values are useful in soil classification and have been correlated with other
parameters. Tests were performed in accordance with ASTM D 4318.

Figure 3.3: Liquid limits testing by Casagrande method

3.2.1.4. Specific gravity of soil

The specific gravity of soil, s, is defined as the ratio of the mass soil particles to the
mass of an equal volume of water at a stated temperature. The specific gravity is
determined by means of calibrated pycnometer, by which the mass and temperature of
de-aired soil water sample is measured.
Tests were performed in accordance with ASTM D 854.
3.2.1.5. Direct shear test

The direct shear test evaluates both cohesion c and angle of internal friction and
internal friction angle. These parameters are used to evaluate a soils shear strength.
Cohesionless soils are always tested in consolidated-drained condition (CD) and
performed in accordance with ASTM D 3080.
The tests were done by Chinese machnine. For cohesive and cohessionless soils, the
first applied normal stress is 0.125, 0.25, 0.5 kG/cm2 for samples with depth less than
10, 20, and 30m, respectively.

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Figure 3.4: The direct shear machine


3.2.1.6. Oedometer test

To carry out this test on the Humboldt system (USA) consists of dead-weight
consolidation. The data were automatically recorded based on the data acquisition
system. Tests were performed in accordance with ASTM 2435.
Tests determined the compressibility of soil.
In this test, a specimen is placed in an oedometer between two porous stones,
which permit drainage.
For soft soil, first applied pressure was at 0.125kG/cm2, and then increased
twice up to 4 kG/cm2. For medium to stiff clay, first applied pressure was 0.25
kG/cm2.
For each load increment, start taking time and deflection reading at the total
elapsed time of 0.1, 0.25, 0.5, 1, 2, 4, 8, 15, 30, 60, 120, 180, 360, 720 and 1440
minutes.

Figure 3.5: The oedometer equipment with the data


acquisition system to record
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

The data from a consolidation test is usually presented on an e-log p curve.


The parameters necessary for settlement calculation can be derived form these curves:
compression index (Cc), recompression index (Cr), preconsolidation pressure (Pc) and
initial void ratio (eo). A separate plot is prepared of change in sample height versus
square time for each load increment to determine the coefficient of consolidation (Cv)
and coefficient of secondary compression (C). These parameters are used to predict
the rate of primary settlement and amount of secondary compression.
3.2.1.7. Unconfined compression test

The unconfined compression test is used to measure the unconfined compressive


strength of cohesive soils. Tests were done by Humboldt (USA) and performed in
according with ASTM 2166-85. Loading data and test parameters are recorded with a
computer based data acquisition system.
3.2.1.8. Triaxial Compression test

The tests were done by LoadTrac-II/FlowTrac-II system of Geocomp (USA). This


system combined with the computer via network card control the pressure of cell and
sample, and then the test can be controlled automatically from start to finish.
Triaxial Compression Test: for a cohesive soil can appear positive pore water pressure
when executing of work or oscillate under ground water, test consolidated undrained
type (CU). The sample is consolidated with drain lines open until no further drainage
occurs (it has consolidated). The drain lines are then closed, and the sample is tested
to failure (undrained). This type is executed to determine the undrained and effective
strength parameters of soil after consolidated.

Figure 3.6: The triaxial compression test equipment with the data acquisition system to
record and accessories
3.2.2. Rock laboratory testing
3.2.2.1. Determination of basic physical properties

The basic physical properties of rock namely; water content, density, grain specific
gravity, and porosity. This method was suggested by ISRM Committee on Laboratory
Tests, document No.2 (1972) Determination of basic physical properties of rock

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

3.2.2.2. Determination water content of Rock specimens

The procedure of this test theoretically the same with moisture content of soil test.
The water content, W, is defined as the ratio of the weight of water in a sample to the
weight of dry sample. The wet sample is weighed, and then over-dried to a constant
weight at a temperature of about 105oC 3oC. The weight after drying is the weight of
dry sample.
The water content is valuable in determining the properties of rock and can be
correlated with other parameters. Tests also were performed in accordance with
ASTM D 2216.
3.2.2.3. Determination density and porosity of Rock specimens

This test is intended to measure effective porosity and density of rock samples in the
form of specimens of regular geometry. The representative sample was selected and
weighed, then saturated it. Its saturated submerged weigh was measured. Allow the
samples were removed from the immersion bath, and weighed saturated sample with
dry surface.
3.2.2.4. Unconfined compressive Strength test for intact Rock core

The unconfined compressive strength test for intact rock core sample is intended to
determine the unconfined compressive strength (qu), and deformation modulus (Es50)
of a rock sample in form of specimens of cylindrical shapes. Tests were done by
Electro Hydraulic Compression Testing Machine, TYA-2000 (Peoples Republic of
China), the load and displacement were measured by loadcell, and position transducer
(Honeywell), the testing system are shown in Fig 3.12. Some rock samples of this test
were done by LoadTrac-II system of Geocomp (USA). This test performed in
according with ASTM D 2938-95. Loading data and test parameters are recorded with
a computer based data acquisition system.

Figure 3.7: The Unconfined compressive test for intact rock equipment with the data
acquisition system to record and accessories
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

3.2.2.5. Direct shear test for intact Rock

The direct shear test for intact rock core sample by compression in bevelled dies was
applied to determine the peak and residual shear strength, and these friction angles of
intact core rock. The direct shear stress is a function of normal stress on the shear
plane in this type of test. Tests were done by Hydraulic Compression Machine, with a
set of dies bevelled at 30o, 45o, and 60o.
The rock test specimen was inserted to bevelled dies, and then pair of dies was placed
between two press platens of compression machine on required shear plane. Apply
load continuously, load and vertical displacement was record by computer. The
loading rate about 0.5 MPa/s was applied. When the maximum load is reached the test
should be further carried out till the load become constant.
3.2.2.6. UU test for Rock core

The rock core specimens were tested in an undrained state under triaxial compression
loading (UU test) in order to obtain the shear strength at various lateral pressures,
angle of shearing resistance, cohesion intercept, and deformation moduli of the intact
rock. Test specimens shall be right circular cylinders having a height to a diameter
ratio of 2.0-2.5 (preferably closer to 2.5. The triaxial cell developed by Hock and
Franklin is used in this test in which cell pressure is provided from a hydraulic pump
connect to an oil inlet in the cell wall to be able to support a confining stress up to 70
MPa.). The tests were performed in accordance with ISRM.
3.2.2.7. Slake durability Index Test

This test method covers the determination of the slake durability index of a shale or
other similar rock after two drying and wetting cycles with abrasion. The slake
durability index is the percentage by dry mass retained of a collection of shale pieces
on a 2.00 mm (No. 10) sieve. The test was performed in accordance with ASTM 4644

3.3. Data processing and statistical analysis


Based on results of laboratory and in-situ tests were done to give the characteristics
values of soil layers.
3.3.1. In-situ testing
3.3.1.1. Standard Penetration Test (SPT)

Results of SPT in field are shown in Appendix 03. The correction factors for all SPT
values are shown below.
For cohesive soil, the correction N-value is called N60 and consists of the correction
for the driving technique corresponding to 60% rod energy. The correction of N-value
shall be 0.75 due to the driving by using rope to drop the hammer.
For cohesionless soil, the correction N-value (N60) is same as that for cohesion soil.
However, gravel particles larger than the SPT sampler (35 mm I.D.) interfere with
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

10

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

driving, giving artificially high N value; so, Skempton (1986) reviewed the
information and proposed a method for correction related to an overburden pressure.
The formula is as followed:
N = CN N60
Where,
CN

100
'v 0

3.3.2. Soil laboratory testing


3.3.2.1. Laboratory testing

To determine the designed values for each layer, physical parameters are analysed and
summarized by calculating the variation coefficient v of parameters (W, s, LL,
PL...). Standard values of soil parameter in layers are calculated as the average value
by using least square method.
Cohesion c and internal friction angle from direct shear test are also analysed by
calculating variation coefficient. Standard values of soil parameter in layers are
calculated as the average value by using least square method.
Testing results are shown summary in Appendix 05& 06.2.
3.3.2.2. Unconfined compression test for cohesive soil

The unconfined compression strength qu is the maximum load at failure. Testing


results are presented on - (stress-strain) curve.
The strength for cohesive soil equal to haft the unconfined compression: Su = qu/2
Testing results are shown in Appendix 06.3.
3.3.2.3. Triaxial compression tests

In CU tests, the strength effective parameters (c; ) are determined.


The coefficient of consolidation Cv can be determined from t100 value in the
consolidated stage of CU test as following:
CV =

D 2
t100

Where:

D: specimen diameter (m)


: 80 for drainage from radial boundary and one end
t100: time at 100% of consolidation
Note: the consolidation parameters and permeability from the results of triaxial
compression test are reference value because these parameters are affected by the
porous stone and the filter paper. The values of t100 determine mainly the shear rate of
samples and are calculated as following: tf = 1.59t100.
Results of triaxial test (CU) are shown in Appendix 06.4.

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

11

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

3.3.3. Rock laboratory testing


3.3.3.1. The basic physical properties of rock

The basic physical properties of rock were calculated relied upon some parameter as
weighed, volume, and density of water.
The water content was calculated by ratio of weight of water contained in pores to
weight of dry sample.
The density and porosity of rock was determined by saturation and buoyancy
techniques. These parameters were calculated follow:
Wg
(g/cm3)
Vb

Density =

Saturated density sat =


Porosity n =

Wsat
(g/cm3)
Vb

Vp
100%
Vb

Bulk volume of sample Vb =


Pore volume (effective) V p =

(Wsat Wsub )

w
(Wsat Wg )

(cm3)

(cm3),

Wsat: Saturated-surface-dry weight of the sample (g)


Wg: Weight of sample before saturated (g)
Wsub: Weight of saturated submerged sample (g)
w: Density of water (g/cm3)
Standard values of basic physical parameter of rock are calculated as the average
value by using least square method.
Where:

3.3.3.2. Unconfined compression test for rock core

The procedures rock strength are theoretically the same with unconfined compression
test for cohesive soil. The testing results are presented on the stress-strain curve, the
unconfined compressive strength (qu) is the maximum of uniaxial stress, and the
deformation modulus (Es50) is determined by ratio of 50% of unconfined compressive
strength to strain at this point. Results of Unconfined compression test are shown in
Appendix 07.1.
The classification of rock on the basis of unconfined compressive strength shall be
determined after Bjeniawski (1989) as follows:
Rock group

Unconfined compressive strength (MPa)

Very weak rock

Weak rock

15

Moderate weak rock

5 25

Moderate strong rock

25 50

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

12

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Strong rock

50 100

Very strong rock

100 250

Extremely rock

250

3.3.3.3. Direct shear test for intact rock core

The shear strength of intact rock was defined as the ratio of shear force to shear area.
The shear strength is calculated follow:
Calculation of shear area A as: A =

d 2
4

, where

d: diameter of the specimen


h: height of the specimen
Calculation of forces:
Shear force P = F cos
Normal force N = F sin
Where;
F: the vertically applied load at any instant
: The angle between the shear plane and vertical direction
Calculation of shear displacement:
Shear displacement = d cos; where
d: the displacement at this instant
Correction of shear area A:
A=

d 2
4

d'
d 2 d '2
2

Calculation of stress:
F sin
A'
F cos
Shear stress =
A'

Normal stress =

The cohesion (c) and angles of internal friction () of peak and residual strength are
determined by normal-shear stress curve. The results of direct shear test for rock core
are shown in Appendix 7.2.
3.3.3.4. UU test for rock core

From results of UU test, strength parameter of the intact rock is calculated as follow
steps:
Calculate the cross-sectional area A of the specimen by using
A=

d 2
4

, where a is diameter of the specimen

Calculate the axial stress 1 by using


CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

13

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

1 =

P
, where P is applied axial load
A

Construct a stress difference (the difference between maximum axial stress, 1max and
the confining stress 3 ) versus axial strain curve.
The strength envelop is obtain by fitting a mean curve to points that created by
plotting between confining pressure and the corresponding axial stress at failure of the
specimens. The straight line should be plotted to only the most relevant part of the
curve, and then its gradient, m and its intercept, b are characterized.
The parameter m and b are used to calculate the internal friction angle, and a value
for the apparent cohesion, c as following formulae.
m 1
m +1
1 sin
c=b
2 cos

= arcsin

Shear strength, max at confining pressure 3 and failure axial stress 1 max is given
by,
max =

1 max 3
2

From the stress-strain curve, the deformation moduli can be calculated as follow
Tangent modulus at zero load (Et)0% equivalent to gradient of tangent to stress strain
curve at zero stress.
Tangent modulus at 50 ultimate load (Et)5% equivalent to gradient of tangent to stress
strain curve at 50 % load
Secant modulus at 50% ultimate load (Es)50% equivalent to gradient of the line joining
zero load point and the 50% ultimate load point on stress-strain curve.
The results of UU test for rock core are shown in Appendix 7.3.
3.3.3.5. Slake durability Index test

Calculate the slake durability index (second cycle), as follows:


Id(2)= (WF-C)/(B-C)x100
Where:
Id(2) is slake durability index (second cycle),
B is mass of drum plus oven-dried sample before the first cycle, g,
WF is mass of drum plus oven-dried sample retained after the second cycle, g, and
C is mass of drum, g.
The rock can be classified based on slake durability index as follows:
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

14

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Rock group

Slake durability index

Very low durability

0-25

Low durability

25-50

Medium durability

50-75

High durability

75-90

Very high durability

90-95

Extremely high durability

95-100

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

15

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

4. SUMMARY ON GEOTECHNICAL CONDITIONS


4.1. Elevation reference and bathymetric data
The co-ordinates system used in this report are in VN-2000 system with the elevation
reference of Hon Dau system. The difference between the CD and Hon Dau system is
+1.30m.
The seabed elevation ranges from -4.5m to -12.0m along the breakwater:
- On the western side (at breakwater root), the seabed is ranging from -4.5m (A10) to
-11m (B4) with the length of about 980m.
- The remained length is slightly flat, ranged from -11.0m to -12.0m at the head of
breakwater.
The seabed elevation of the channel ranges from -11.0m (at the berth area) to -14.1m
(at C2), then getting deeper and reaches -24.8m (at the north of Son Duong island).
4.2. Geotechnical profile
The layout of boreholes are superimposed into the geologic map with the scale of
1/50,000, and shown in the Appendix 1 and figure 4.1. Faults on land area of the map
are assumed to extend towards seashore area to clarify the geotechnical profiles.
Based on the results of soil investigation and laboratory test, the geological conditions
of the project area are relatively complicated by the presence of recent marine
formations in details as follows:
Layer 1: Marine sand, fine to medium grained size, in yellowish brown, loose
to medium dense state.
Layer 2: Marine clay, very soft to soft, bluish grey, yellowish grey. There are
lenses of sandy clay or clayey siltt in this layer (namely 2b) with not uniformly
distribution.
Layer 3: Intermediate sand, fine to medium with gravel, yellowish grey,
medium dense state.
Layer 4: Intermediate clay, stiff, yellowish grey, reddish brown.
The above sediments are overlying the complicated complex of rock with Age ranged
from Ordovician - Silurian period (with marine sediment rocks) to Triassic period
(with volcanic igneous rock).
The 3 mains rock formations in the area are as follows (arranged in order of old to
young age):
- Formation Song Ca (O3-S1 sc2)- Ordovician to Silurian Period, consists of shale in
blackish grey color with strip structure of quartz. Its thickness is upto 700m. Above
this layer is also shale with the interbeded thin layers of clay and calcic.
This formation is located in the South of job site, and existed mainly in the site area
where there is Song Ca deep fault, still active.

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

16

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

- Formation Hoanh Son (T2a hs)- Triassic Period: intrusive rock of granite,
granoporphyry, found in boreholes along sea shore of oil terminal area (borehole B13
to B16).
- Formation Dong Truc (J1-2 dt) Jurassic Period: consists of igneous rock of dacite,
rhyolite at the bottom and conglomerate at the top. This formation is found near the
Son Duong Island, head of break water and along navigation channel.
The upper cover of rock formations are residual weathering following layers:
Layer 5 or 5b: Residual soil, weathered from shale, siltstone into sandy clay
with gravel (layer 5) or weathered from sandstone, siltstone into clayey sand
with gravel (layer 5b).
Layer L1: this is a weathered formation from volcanic rubble of dacite/ rhyolite
into coarse sand with gravel, whitish grey, very dense. This formation is only
located near the Son Duong island area.
Rock formations:
Layer L2: volcanic rubble of dacite/ rhyolite.
Layer G: granite, granoporphyry.
Layer 6a: Shale with strip of quartzite, dark grey, high fractured.
Layer 6b: Shale with strip of quartzite, dark grey, whitish grey, highly
fractured.
Layer 6c: Shale with strip of quartzite, sericite, dark grey, whitish grey,
medium weather.
Based on the profile along the breakwater axis, provided in Appendix 2, the
breakwater can be divided into 3 main parts, from its root to head:
-Part I: from borehole A7 to the west end, about 1,400m long, with marine sand on the
top and shale of weathered degree reducing with depth at the bottom of profile.
-Part II: transition area (from A7 to A4) about 1,580m long with the rock formations
of sediment rock, and the fault clearly found passing through borehole A6.
-Part III: from borehole A3 to A1 (head of breakwater) about 2,900m long with soft
marine clay on top and volcanic rubble at the bottom of profile.
The following is geological map 1:50,000 in the area (figure 4.1), and the distribution
of rock layers shown in figure 4.2.

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

17

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

SOIL INVESTIGATION REPORT

Figure 4.1: Geological Map

CNG
CNG
TY C
TY PHN
C PHN
T VN
T VN
THIT
THIT
K CNG
K CNG
- K- THUT
K THUT
BIN
BIN
(PORTCOAST
(PORTCOAST
CONSULTANT
CONSULTANT
CORPORATION)
CORPORATION)

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

18

18 18

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

SOIL INVESTIGATION REPORT

Figure 4.2: Distribution of rock formations

CNG
CNG
TY C
TY PHN
C PHN
T VN
T VN
THIT
THIT
K CNG
K CNG
- K- THUT
K THUT
BIN
BIN
(PORTCOAST
(PORTCOAST
CONSULTANT
CONSULTANT
CORPORATION)
CORPORATION)

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

19

19 19

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

SOIL INVESTIGATION REPORT

5. GEOTECHNICAL CHARACTERISTICS OF SOIL/ROCK LAYERS


Summary of soil laboratory testing results are displayed in Appendix 5 and soil profiles are
displayed in Appendix 02.
Summary of Rock laboratory testing results are displayed in Appendix 7.
The summary data for each layer are shown in the Appendix 5, plotted in graphs shown in
the Attachment B.
The following table 5.1 is the summary on soil properties proposed to use in the design.
Table 5-1: Summary of physical, mechanical properties for soil layers
Layer

3
(kN/m )

Su
(kPa)

eoavg.

Cc

Pc
2
(kG/cm )

Cv
2
(m /yr)

'

20.3

17.9

-4z+6.53

1.185

0.336

5.13E-03

'vo

21

2b

19.6

42.0

0.761

0.030

2.00E-04

'vo

25 36

21.2

19.7

20.7

5b

21.1

L1

21.7

0.583

100.7
339.8

Max

Min

9.3

0.3

1.48

11

1.5

0.93

9.3

1.1

20.2

0.5

11.5

0.5

6.9

0.4

29 32
o

o
o

0.420

31 54

0.709

0.198

4.97E-03

'vo

25 20

Thickness

2.07

0.602

39

0.482

41 08

10.2

1.8

0.417

15.5

0.6

41 43

Note: (*) z = 0 at the top of layer


The elastic modulus for sandy layers can be determined from SPT tests by using the
following relationship:
E = 0.3 (NSPT + 6)
The elastic moduli for sandy layers are obtained as follows:
-Layer 1: E = 4.4 MPa (SPT)
-Layer 3: E = 10.2 MPa (SPT)
-Layer 5b: E = 17.0 MPa (SPT)
-Layer L1: E = 17.7 MPa (SPT)

The following table is the summary on rock laboratory test results


CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

20

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

SOIL INVESTIGATION REPORT

Table 5-2: Summary of physical, mechanical properties for rock layers


QUC
(dry),
Mpa

QUC
(sat.),
MPa

E50
(sat.),
MPa

c
(MPa)

2.7

40.5

29o11

8.58

12.0

2258

27o32

6.20

2560

1254

37o22

8.70

7378

4577

37o48

11.35

Layer

(kN/m3)

6a

24.4

6b

24.7

L2a

25.1

19.3

8.1

L2b

26.2

59.1

49.5

25.8

E50
(dry),
MPa

42.6

3115

The mechanical properties of rock layer are presented in table 5-3, and 5-4. These are
determined using RocLab 1.0 which based on Hoek Brown criterion ( 2002), and Morh
Coulomb Criterion.
Table 5-3: Summary of mechanical properties for rock layers based on Hoek
Brown, and Mohr Coulomb Criterions (dried condition).

Layer

QUC
(dry),
MPa

GSI

L2a

19.3

10

L2b

59.1

10

mi

E
(dry),
MPa

Global
Strength
(dry)
MPa

Tensile
strength
(dry)
Mpa

(dry)

C
(dry)
(MPa)

20

439.32

1.53

-1E-03

23o39

0.5

-3E-03

1.53

20

768.77

4.68

23 39

Table 5-4: Summary of mechanical properties for rock layers based on Hoek
Brown, and Mohr Coulomb Criterions (saturated condition).

mi

E
(sat),
MPa

Global
Strength
(sat)
MPa

Tensile
strength
(sat)
MPa

(sat)

C
(sat)
(MPa)

10

346.4

0.47

-2E-03

14o24

0.183

10

20

284.6

0.64

-4.58E-04

23o39

0.21

Layer

QUC
(sat),
MPa

GSI

6b

12.0

L2a

8.1

L2b

49.5

10

20

703.6

3.92

-3E-03

23 39

1.281

42.58

38

32

3270

10.22

-0.012

37o00

2.55

In design, if choosing the parameters from Hoek-Brown analysis, then it is rather


conservative, because of following reasons:
-The analysis is based on UC test of a few samples which are not sure of representative of
the layers. There is not any samples done for layer 6a due to low RQD and TCR (total core
recovery). With the value of RQD less than 25% (soft rock), it was obtained 79% of rock
core in layer 6a, and 53% in layer 6b.
CNG TY C PHN T VN THIT K CNG - K THUT BIN
(PORTCOAST CONSULTANT CORPORATION)

21

FORMOSA HA TINH STEEL CORPORATION


THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

SOIL INVESTIGATION REPORT

-Schist formation with strips of quarzite sandstone strongly crushed and folded lead to
strength heterogeneity. Along the cleavage surfaces (i.e. paralell to loading direction) it can
be very weak, but perpendicular to them it can be strong. The typical dip angle of cleavage
surfaces is unknown.
-As a result, in Hoek-Brown analysis, the Geological Strength Index (GSI) determined
from rock structure is unknown and effected to the results, then it can not be used for
deriving global and tensile strength.
The plot of compressive strength from laboratory rock test for layer 6b vs. RQD imposed
with Allowable Bearing Pressure, Qa (by Peck et al, 1974) using se-mi emperical method
is shown in the figure 5.1.
Based on this curve (allowable bearing pressure by Peck), the bearing pressure for layer 6a
and 6b are 1.35 and 3.0 Mpa; respectively.
However, these values are still overestimated the Qa value because it does not take into
account the condition of joints and presence of infilling material.
30.0
y = 1E-04x 2 + 0.1485x + 3.766
R2 = 0.5989

Strength, MPa

25.0
20.0
15.0
10.0
5.0
0.0
0

20

40

60

80

100

RQD, %
Qa - Peck

UU test

UC test

DS test

Fig. 5.1. Plot of compressive strength from lab test vs. RQD with the correlation curve of
Qa (Peck et al, 1974)

CNG TY C PHN T VN THIT K CNG - K THUT BIN


(PORTCOAST CONSULTANT CORPORATION)

22

ATTACHMENT A: QUANTITY OF SOIL INVESTIGATION WORKS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

BNG TNG HP KHI LNG KHOAN BIN 2

TT

V tr khoan

VN2000 System

coordinate

Ngy khoan

Kt thc

St

start date

end date

0-50m
borehole
(clay, sand)

Tng si
(Grevel,
boulders
and
cobbles)
borehole

Ngy 26 thng 06 nm 2009


Tng
Tng
SPT

T Mng

Hop mau

Rock
borehole

amount

Standard
Penetration
test
into soil

SPT

13
13
15
13
10
16
9
7
10
15
16
10
15
15
12
9
5
9
5
10
18
8
11
10
10
12
10
8
2
3
4
10
10
10
10
11
10
9
4
2
5
4

1
1
0
1
1
1
0
1
2
1
1
1
1
0
2
1
0
0
0
2
1
2
1
1
0
0
1
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0

2
4
3
5
6
5
4
6
6
5
5
6
2
8
7
9
9
2
10
9
4
7
6
6
6
7
3
9
5
10
5
0
1
0
0
0
0
8
9
8
9
9

Ghi ch

3" thin
Core Boxes
walled
(4m per Note
tube
box)
sampling

borehole

TT

X(M)

Y(M)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42

A1
A2
A3
A4
A5
A6
A7
AA7
A8
A9
A10
A15
A16
B1
B2
B3
BB3
B4
BB4
B5
BB6
B7
BB8
BB9
B10
B11
B12
B13
B14
B15
B16
CC1-1
C2
CC3
C4
CC4
C5
D1
D2
D3
D4
D5

600997
601051
601102
600985
600867
600750
600632
600792
600214
599796
599378
600801
600905
600726
600628
600297
600420
599971
600070
599646
599264
599125
599036
598923
598649
598854
599059
598447
597674
598158
597928
600166
600029
599539
600029
599710
600029
600800
600965
6001131
601297
600905

1999996
1999503
1999006
1998566
1998128
1997690
1997252
1996985
1997038
1996824
1996611
2001890
2000896
1997911
1997544
1997170
1996904
1997004
1996723
1996838
1996833
1997105
1997279
1997501
1998417
1998522
1998626
1999774
2001288
2001535
2002885
2003661
2002997
2001653
1999996
2000103
1997816
1996562
1995894
1995226
1994558
1994354

26.9.08
4.1.09
18.10.08
29.05.09
26.05.09
24.05.09
2.11.08
17.02.09
17.5.09
11.12.08
20.9.08
17.1.09
11.1.09
25.10.08
19.12.08
19.05.09
21.03.09
18.9.08
23.02.09
10.05.09
11.06.09
3.12.08
08.06.09
05.06.09
16.11.08
12.03.09
13.11.08
05.03.09
11.02.09
5.2.09
1.2.09
15.06.09
14.9.08
04.06.09
16.9.08
03.06.09
17.9.08
27.03.09
05.04.09
10.04.09
16.04.09
04.05.09

27.9.08
6.1.09
23.10.08
02.06.09
28.05.09
26.05.09
7.11.08
22.02.09
19.05.09
16.12.08
23.9.08
21.1.09
14.1.09
31.10.08
27.12.08
23.05.09
23.3.09
19.9.08
04.03.09
14.05.09
14.06.09
10.12.08
11.06.09
08.06.09
3.12.08
17.03.09
14.11.08
11.03.09
15.02.09
11.2.09
5.2.09
15.06.09
16.9.08
04.06.09
17.9.08
04.06.09
18.9.08
04.04.09
10.04.09
15.04.09
28.04.09
07.05.09

L1

598495

1998338

21.12.08

30.12.08

16

L2

598705

1997927

16.12.08

20.12.08

21

L3

600495

1994137

30.04.09

09.05.09

11

L4

598809

1997724

27.5.09

31.05.09

14

L5

598597

1998115

01.06.09

04.06.09

L6

598396

1997940

06.06.09

07.06.09

L7

598259

1998207

08.06.09

11.06.09

11

LL8

599059

1996792

10.05.09

27.05.09

10

13
18.5
12.2
12.4
11.1
24.1
7.6
12
17.5
27.1
23.4
14.9
16.9
8.6
18.6
13.7
7.5
13.9
7.2
16.3
14
15.3
17.25
16.5
15
13
9.3
13.5
0.7
2.5
4
15
13.1
15
15
17
18.75
8.5
5
10
7.5
5.4
547.8

6.8
0
11.55
8.6
5.4
0
5.2
0
0
1.6
0
0
3.5
12.7
0
0
0
0
0
0
10.5
0
0
0
2.8
10
4.3
0
4.3
0
0
0
0
0
0
0
0
1.1
0
0
0
0.6
88.95

4.70
19.54
4.47
19
23.5
15.9
15.2
28
22.5
11.3
16.6
25.1
14.63
28.7
31.4
36.3
32.5
4.85
43
33.7
15.5
24.7
22.75
23.5
16.93
17
8.44
28.5
18.5
47.5
23.82
0
2.2
0
0
0
0
30.4
35
30
32.5
34
842.13

24.50
38.04
28.22
40.00
40.00
40.00
28.00
40.00
40.00
40.00
40.00
40.00
35.03
50.00
50.00
50.00
40.00
18.75
50.20
50.00
40.00
40.00
40.00
40.00
34.73
40.00
22.04
42.00
23.50
50.00
27.82
15.00
15.30
15.00
15.00
17.00
18.75
40.00
40.00
40.00
40.00
40.00
1478.88

408

25

225

Total drilling depth

547.8

88.95

842.13

1478.88

408

25

225

Dierect
Dierect
Unconfined Unconfined
shear test shear test compressive compressive
(Soil)
(Rock)
Test (Soil)
Test (Rock)

Index test Index test Triaxial


(Soil)
(Rock)
CU test

no

Oedometer
Test (CON)


CU ( ( (
( (

)
)
()
)
)
)
7
1
1
1
1
10
2
2
6
1
1
1
1
10
1
1
10
1
1
1
15
1
1
7
1
1
7
3
8
1
11
10
2
1
1
1
1
8
1
1
1
13
1
1
1
1
6
1
1
1
9
2
2
2
7
1
1
1
4
8
1
5
1
10
1
13
1
1
7
4
1
1
2
11
1
1
1
3
10
1
1
5
2
1
1
12
7
2
1
1
4
1
1
2
3
1
1
1
1
1
2
1
1
8
8
1
7
8
8
1
7
1
5
1
1
2
2
1
1
2
1
4
3
2
307
46
8
8
10
3
18
9

Triaxial
Triaxial
durable
Undrained Undrained slake test
Test(Soil) Test(rock)
(rock)
(
)

1
1
1

1
1
1

1
1
1
1

1
1

1
1
1

97

404

54

10

10

18

11

10

ATTACHMENT B: GEOTECHNICAL CHARACTERISTICS OF SOIL


LAYER
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

nh km - Attachment : B
Hnh - Figure : 4.3

Figure - Hnh 4.3

Layer 2b: Soft to medium sandy silt to clayey silt


Layer 2b: Bi ct, bi st, trng thi do chy n do mm

20

Su [kPa]
40

60

0.0

60

2.0
50

4.0

PI (%)

Z,m

40

6.0

8.0

30

10.0
20

12.0
UC TEST-TH NGHIM UC

10

14.0

SPT TEST-TH NGHIM SPT


0.23Sigma'

16.0

0
0

10

20

30

40

50

60

LL (%)

70

80

90

100

110

80

nh km - Attachment : B
Hnh - Figure : 4.4

Figure - Hnh 4.4

Layer 4: Intermediate clay, stiff, yellowish grey, reddish brown


Lp 4: St trng thi do cng, xm vng, nu

0
0.0

50

5.0

40

10.0

40

60

Su [kPa]
80 100 120 140 160 180

PI (%)

Z,m

60

20

30

15.0

20

20.0
UU TEST-TH NGHIM UU
UC TEST-TH NGHIM UC

25.0

10

SPT-TEST-TH NGHIM SPT


Average-Trung bnh UC
0.23Sigma'

30.0

0
0

10

20

30

40

50

60

LL (%)

70

80

90

100

110

nh km - Attachment : B
Hnh - Figrue : 4.5

Figure - Hnh 4.5

Layer 5: Residual soil, weathered from shale


Lp 5: t trm tch, phong ha t phin st

60

100

200

Su [kPa]
300
400

500

0.0
5.0

50

10.0
15.0

PI (%)

Z,m

40

20.0

30

25.0
30.0

20

35.0
40.0

10

45.0
50.0

0
0

10

20

30

40

50

60

LL (%)

70

80

90

100

110

SPT-TEST-TH NGHIM SPT


0.23Sigma'

600

nh km - Attachment : B
Hnh - Figure : 4.6

Figure - Hnh 4.6

Layer 1: Marine sand, fine to medium grained size, in yellowish brown, loose to medium dense state
Lp 1: Ct trm tch bin, ht mn n trung, mu nu vng, trng thi ri rc n cht va
Layer-Lp 1
0
100

10

20

30

40

50

60

70

0
N_SPT-Layer-Lp 1

90

Phi-Layer-Lp 1

80

50
40
30

Depth- su(m)

60

% qua ry - % passing

70

20
10
10

100.000

10.000

1.000

0.100

0.010

ng knh ht, mm - Grain-Size Diameter, mm

0
0.001

12

Average-Trung bnh-F

80

nh km - Attachment : B
Hnh - Figure : 4.3

Figure - Hnh 4.3

Layer 2b: Soft to medium sandy silt to clayey silt


Layer 2b: Bi ct, bi st, trng thi do chy n do mm

20

Su [kPa]
40

60

0.0

60

2.0
50

4.0

PI (%)

Z,m

40

6.0

8.0

30

10.0
20

12.0
UC TEST-TH NGHIM UC

10

14.0

SPT TEST-TH NGHIM SPT


0.23Sigma'

16.0

0
0

10

20

30

40

50

60

LL (%)

70

80

90

100

110

80

APPENDIX 1: LAYOUT OF SOIL INVESTIGATION POINTS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

APPENDIX 2: SOIL PROFILES


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

APPENDIX 3: BORING LOGS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

APPENDIX 4: PHOTOGRAPHS OF CORE-BOX


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A01


No.

Depth, m

20-23m

2324.5m

Borehole offshore

Photograph

Description
From 19 to 19.8: Silty sand with
gravel, whitish grey, weathered from
Rhyolite.
From 20.8 to 23: Rhyolite, bluish
grey,
highly
to
moderately
weathered,
REC=95%,
highly
fractured.
Rhyolite, whitish grey, highly to
moderately weathered, REC=80%,
highly fractured

Page 1

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A02


No.

Depth,
m

18-23m

Photograph

Description

Rhyolite,
white,
whitish
grey,
yellowish brown, highly to completely
weathered. REC=85-100%.

From 23 to 26: Rhyolite, grey, whitish


grey, highly weathered, REC=100%.
RQD=20%.
From 26 to 28: Rhyolite, bluish grey,
whitish grey, moderately to slightly
weathered, RQD=30-40%,
REC=95%.

23-28m

28-33m

Rhyolite, bluish grey, whitish grey,


slightly weathered, RQD=60-70%,
REC=95%,

33-38m

Rhyolite, whitish grey, bluish grey,


RQD=10-20%, REC=100%, highly
fractured.

Borehole off shore

Page 2

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A03


No.

Depth, m

19-23m

23-27m

27-29m

Photograph

Description

Gravel with coarse sand, whitish


grey, grey, very dense state.

Rhyolite, whitish grey, highly to


moderately weathered, REC=80%,
RQD=11-41%, FI>20

Rhyolite, whitish grey, highly to


moderately weathered, REC=80%,
RQD=0-11%, FI>20

Borehole off shore

Page 3

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A04


No.

Depth,
m

Photograph

Description

21-25m

Slate
sandwiched
siltstone,
sandstone, grey, whitish grey, highly
to completely weathered, REC=70%,
highly fractured, very weak.

25-29m

Rhyolite, grey, whitish grey, highly to


moderately
weathered,
RQD=2030%,
REC=100%,
weak
to
moderately strong.

29-33m

Rhyolite,
grey,
whitish
grey,
moderately
weathered,
RQD=2030%,
REC=100%,
weak
to
moderately strong.

33-37m

Rhyolite,
grey,
whitish
grey,
moderately to lightly weathered,
RQD=20-30%, REC=100%, weak to
moderately strong.

37-40m

Rhyolite,
grey,
whitish
grey,
moderately to lightly weathered,
RQD=20-30%, REC=100%, weak to
moderately strong.

Borehole off shore

Page 4

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A05


No.

Depth,
m

Photograph

Description

16-20

Siltstone sandwiched slate, grey,


whitish grey, highly weathered,
REC=20%, highly fractured, very
weak.

20-24

Siltstone sandwiched slate, grey,


whitish grey, highly to moderately
weathered,
REC=40%,
highly
fractured,
weak to moderately
strong,.

24-28

Siltstone sandwiched slate, grey,


whitish grey, highly to weathered,
REC=40%, highly fractured, weak to
moderately strong,

28-32

From
28
to
30m:
Siltstone
interbeded with slate, whitish grey,
moderately weathered, REC=80%,
moderately strong.
From 30 to 32: Siltstone interbeded
with slate, whitish grey, highly to
moderately weathered, REC=40%,
highly fractured, weak to moderately
strong.

32-36

36-40

Borehole off shore

Siltstone interbeded with slate, grey,


whitish grey, highly to moderately
weathered,
REC=30%,
highly
fractured,
weak to moderately
strong.
From
36
to
37m:
Siltstone
interbeded with slate, grey, whitish
grey,
moderately
weathered,
REC=30%, highly fractured, weak to
moderately strong.
From
37
to
40m:
Siltstone
interbeded with slate, whitish grey,
bluish grey, slightly weathered.
RQD=50-60%, REC=100%.

Page 5

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A06


No.

Depth, m

Photograph

Description

21-25m

Siltly sand with gravel,, white, grey,


blackish grey, weathered from
volcanic tuff alternated with silty
sandstone.

25-29m

Siltly sand with gravel,, white, grey,


blackish grey, weathered from
volcanic tuff alternated with silty
sandstone.

29-33m

Siltly sand with gravel,, white, grey,


blackish grey, weathered from
volcanic tuff alternated with silty
sandstone.

33-37m

Volcanic tuff alternated with silty


sandstone, white, whitish grey,
blacklish grey, highly to completely
weathered

37-40m

Volcanic tuff alternated with silty


sandstone, white, whitish grey,
blacklish grey, highly to completely
weathered

Borehole off shore

Page 6

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A07


No.

Depth, m

13-17m

Photograph

Description

Shale, dark grey, bluish grey, highly


weathered, highly fractured, RQD=0%,
REC=75%. FI>20

17-21m

Shale, dark grey, bluish grey, highly


weathered, highly fractured, RQD=0%,
REC=75%. FI>20

21-25m

Shale, dark grey, bluish grey, highly


weathered, highly fractured, RQD=0%,
REC=75%. FI>20

25-28m

Shale, dark grey, bluish grey, highly


weathered, highly fractured, RQD=1321%, REC=75%. FI=19

Borehole off shore

Page 7

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE AA7


No.

Depth, m

10-15

15-20

15.3-30

Photograph

Description
Sandstone
alternated
with
volcanic tuff, yellow, yellowish
grey, highly to moderately
weathered,
RQD=20-30%,
REC=80%, weak to very weak.

Sandstone
alternated
with
volcanic
tuff,
grey,
yellow,
yellowish grey, whitish grey,
highly to moderately weathered,
RQD=10-30%, REC=85%, weak.

Sandstone
alternated
with
volcanic
tuff,
grey,
yellow,
yellowish grey, whitish grey,
highly to moderately weathered,
RQD=10-30%, REC=85%, weak.

30-35

Sandstone
alternated
with
volcanic tuff, whitish grey,
yellow, reddish brown, highly to
moderately
weathered,
RQD=30-40%, REC=95%, weak
to very weak.

35-40

Sandstone
alternated
with
volcanic tuff, siltstone, reddish
brown, whitish grey, yellowish
grey, moderately weathered,
RQD=50-70%, REC=100%.

Borehole off shore

Page 8

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A08


No.

Depth,
m

17-21

21-25

25-29

29-33

33-37

37-40

Photograph

Description
Sandstone alternated with
volcanic tuff contain quartz,
whitish grey, yellowish grey,
highly weathered, RQD=1020%, REC=95%, moderately
to highly strong.
Sandstone alternated with
volcanic tuff contain quartz,
yellow,
yellowish
grey,
reddish
brown,
highly
weathered,
RQD=40-50%,
REC=95%, strong.

Sandstone alternated with


volcanic tuff contain quartz,
yellow,
yellowish
grey,
reddish
brown,
highly
weathered,
RQD=40-50%,
REC=95%, strong.
Sandstone alternated with
volcanic tuff contain quartz,
yellow,
yellowish
grey,
reddish
brown,
highly
weathered,
RQD=40-50%,
REC=95%, strong.
Sandstone alternated with
volcanic tuff contain quartz,
yellow,
yellowish
grey,
reddish
brown,
highly
weathered,
RQD=40-50%,
REC=95%, strong.
Sandstone alternated with
volcanic tuff contain quartz,
yellow,
yellowish
grey,
reddish
brown,
highly
weathered,
RQD=40-50%,
REC=95%, strong.

Borehole off shore

Page 9

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A09


No.

Depth,
m

16-21m

21-26m

26-31m

Photograph

Description
From 16-17m: Quartzite, white,
REC=60%, moderately fractured.
From 17 to 21: Slate interbeded by
siltstone,
grey,
blackish
grey,
REC=10%, highly fractured, very
weak
From 21 to 21.7: Slate interbeded
by siltstone, grey, blackish grey,
REC=5%.
From 21.7 to 23: Slate contains
quartz, white, blackish grey, yellow,
reddish brown, highly weathered,
REC=95%, highly fractured.
From 23.4 to 26: Slate contains
quartz, whitish grey, blackish grey,
completely weathered, REC=30%,
highly fractured.

From 26 to 30.2: Slate contains


quartz, grey, blackish grey, highly to
completely weathered. REC=30%,
highly fractured.
From
30.2
to
31:
Siltstone,
sandstone alternated with volcanic
tuff, white, yellow, reddish brown,
completely weathered, REC=5%.

31-36m

From
31
to
36m:
Siltstone,
sandstone alternated with volcanic
tuff, white, yellow, reddish brown,
highly to completely weathered,
REC=5=20%, weak to moderately
strong.

36-40m

Siltstone, sandstone alternated with


volcanic tuff, white, yellow, reddish
brown,
highly
to
completely
weathered, REC=30-40% weak to
moderately strong.

Borehole off shore

Page 10

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A10


No.

Depth, m

Photograph

Description

15-20m

20-25m

25-30m

30-35m

35-40m

Borehole off shore

Gravel, whitish
REC=5%.

grey,

grey,

From 15 to 23.5m: Gravel,


whitish grey, yellow, REC=10%
From 23.5 to 25m: Slate,
blackish grey, highly weathered,
highly fractured.

From 25 to 26.4: Slate,


blackish grey, highly weathered,
highly fractured.
From 26.4 to 30m: Slate,
reddish
brown,
highly
to
completely weathered, highly
fractured.
Slate, reddish brown, highly to
completely weathered, highly
fractured.

From 35 to 39.2: Slate, blackish


grey, highly weathered, highly
fractured.
From 39.2 to 40m: Slate with
quartz, white, blackish grey,
REC=70%

Page 11

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A15


No.

Depth, m

Photograph

Description

15-20m

From 15 to 17: Rhyolite, grey, bluish


grey, slightly weathered, RQD=3040%, REC=100%.
From 17 to 20: Rhyolite, grey, bluish
grey yellowish grey, slightly to
moderately weathered, RQD=7080%, REC=100%.

20-23m

Rhyolite,
yellowish
slightly
weathered,
REC=100%.

23-28m

Rhyolite,
yellowish
grey,
grey
slightly to moderately weathered,
RQD=50-60, REC=95%.

28-33m

From 28 to 30: Rhyolite, reddish


brown,
yellowish
grey,
grey
moderately weathered, RQD=40-50,
REC=95%.
From 30 to 33m: Rhyolite, yellowish
grey,
grey
slightly
weathered,
RQD=80-90%, REC=95 -100%.

33-38m

38-40m

Borehole off shore

grey,
grey
RQD=70%,

Rhyolite,
yellowish
grey,
grey
slightly to moderately weathered,
RQD=60-70, REC=100%.

Rhyolite,
yellowish
grey,
grey
slightly to moderately weathered,
RQD=30-50%, REC=95%.

Page 12

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE A16


No.

Depth,
m

Photograph

Description

20-24

Rhyolite, whitish grey, bluish


grey, brownish grey, highly
weathered,
RQD=10-30%,
REC=90-95%.

24-35

Rhyolite, grey, whitish grey,


moderately
weathered,
RQD=50-60%, REC=100%.

Borehole off shore

Page 13

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B1


No.

Depth, m

Photograph

Description

21-25m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly weathered. RQD = 0-25%,
REC = 80%, FI > 20

25-29m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly weathered. RQD = 0-30%,
REC = 80%, FI > 20

29-33m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly weathered. RQD = 0-15%,
REC = 80%, FI > 20

33-37m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly weathered. RQD = 0-36%,
REC = 80%, FI > 20

37-41m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly weathered. RQD = 0-15%,
REC = 80%, FI > 20

41-45m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly weathered. RQD = 0-27%,
REC = 80%, FI > 20

45-49m

Volcanic
tuff
alternated
with
sandstone, siltstone, yellowish grey,
yellowish brown, whitish brown,
highly to moderate weathered.
RQD= 25-41%, REC = 80%, FI > 20

49-50m

Volcanic
sandstone,
yellowish
highly to
RQD= 0%,

Borehole off shore

tuff
alternated
with
siltstone, yellowish grey,
brown, whitish brown,
moderate weathered.
REC = 80%, FI > 20

Page 14

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B02


No.

Depth, m

Photograph

Description

18-23

Siltstone interbeded with slate,


quartzite, yellow, reddish brown,
whitish
grey,
grey,
highly
weathered, highly to moderately
fractured, very weak.

23-28

Siltstone interbeded with slate,


grey, blackish grey, moderately
weathered, REC=30%, highly
fractured, very weak.

28-33

Siltstone interbeded with slate,


grey, blackish grey, moderately
weathered, REC=70%, highly to
moderately
fractured,
very
weak.

33-38

38-43

43-48

48-50

Siltstone interbeded with slate,


grey, blackish grey, lightly
weathered.
RQD=30-40%,
REC=95%, moderately strong.

Siltstone interbeded with slate,


grey, blackish grey, lightly
weathered.
RQD=30-40%,
REC=100%, moderately strong.

Siltstone interbeded with slate,


grey, blackish grey, highly to
moderately
weathered.
RQD=20-30%,
REC=100%,
weak to moderately strong.

Siltstone interbeded with slate,


grey,
whitish
grey,
lightly
weathered, REC=100%, hightly
fractured, weak.

Borehole off shore

Page 15

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B03


No.

Depth,
m

Photograph

Description

14-18m

From 14 to 16m: Sandstone, siltstone


interbeded with slate, yellowish grey,
grey, highly weathered, REC=95%,
very weak.
From 16 to 18m: Siltstone interbeded
with slate, blackish grey, slightly to
moderately weathered. RQD=10-30%,
REC=100%, weak to moderately
strong.

18-22m

From 18 to 21m: Siltstone, sandstone


interbeded with slate, grey, bluish
grey, moderately weathered. , highly
fracture, RQD=10-20%, moderately
strong,
From 21 to 22m: Siltstone, sand stone
interbeded with slate, grey whitish
grey, slightly weathered. RQD=3040%, REC=100%, moderately strong.

22-26m

Siltstone, sandstone interbeded with


slate, whitish grey, bluish grey,
slightly weathered.
RQD=30-40%,
REC=100%, moderately strong.

26-30m

Siltstone, sandstone interbeded with


slate, bluish grey, whitish grey,
slightly weathered,
RQD=30-40%,
REC=100%, moderately strong.

30-34m

Siltstone, sandstone interbeded with


slate, bluish grey, whitish grey,
RQD=30-40%,
REC=100%,
moderately strong.

34-38m

Siltstone, sandstone interbeded with


slate, bluish grey, whitish grey,
slightly weathered,
RQD=10-20%,
REC=100%, moderately strong.

38-42m

Siltstone, sandstone interbeded with


slate, bluish grey, whitish grey,
slightly weathered,
RQD=20-30%,
REC=100%, strong.

Borehole off shore

Page 16

Photographs of Core-Box

Appendix 4

42-46m

Siltstone, sandstone interbeded with


slate, bluish grey, whitish grey,
slightly weathered,
RQD=30-40%,
REC=100%, strong.

46-50m

Siltstone, sandstone interbeded with


slate, bluish grey, whitish grey,
slightly weathered,
RQD=30-40%,
REC=100%, strong.

Borehole off shore

Page 17

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE BB03


No.
1

Depth,
m

Photograph

Description

05-9m

Siltstone, sandstone alternated with


volcanic tuff, whitish grey, grey,
reddish
brown,
completely
weathered, weak.

9-13m

Siltstone, sandstone alternated with


volcanic tuff, highly to completely
weathered, weak to very weak.

13-17m

Siltstone, sandstone alternated with


volcanic tuff, whitish grey, yellow,
reddish brown, highly to completely
weathered, weak to very weak.

17-21m

Siltstone, sandstone alternated with


volcanic
tuff,
brownish
grey,
yellowish grey, highly to moderately
weathered, REC=70%, weak to
moderately strong.

21-25m

Siltstone, sandstone alternated with


volcanic
tuff,
brownish
grey,
yellowish grey, highly to moderately
weathered, REC=70%, weak to
moderately strong.

25-29m

Siltstone, sandstone alternated with


volcanic tuff, whitish grey, yellowish
grey, highly weathered, REC=90%,
weak to very weak.

29-33m

Siltstone, sandstone alternated with


volcanic tuff, whitish grey, yellowish
grey, highly weathered, REC=90%,
weak to very weak.

Borehole off shore

Page 18

Photographs of Core-Box

Appendix 4

33-37m

From
33
to
34m:
Siltstone,
sandstone alternated with volcanic
tuff, yellowish grey, whitish grey,
REC=60%, very weak.
From 34 to 37: Siltstone, sandstone
alternated
with
volcanic
tuff,
yellowish
grey,
whitish
grey,
RQD=30-40%, REC=85%, weak to
moderately strong.

37-40m

Siltstone, sandstone alternated with


volcanic tuff, yellow, whitish grey,
reddish grey, highly weathered,
RQD=20-30%, REC=100%, weak to
moderately strong,

Borehole off shore

Page 19

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B4


No.

Depth, m

13-17m

17-19m

Borehole off shore

Photograph

Description
Sandstone, claystone alternated with
volcanic tuff, highly to completely
weathered, yellowish grey, brownish
grey,
(REC=99-100%, RQD=3050%, FI=12-20)

Sandstone, claystone alternated with


volcanic tuff, highly to completely
weathered, yellowish grey, brownish
grey,
(REC=99-100%, RQD=3050%, FI=12-20)

Page 20

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE BB4


No.

Depth, m

Photograph

Description

07-12m

Silty clay with gravel, whitish grey,


brownish
grey,
yellowish
grey,
weathered from slate, siltstone

12-17m

Siltstone interbeded with slate, grey,


bluish grey, highly to completely
weathered.

17-22m

Siltstone interbeded with slate, grey,


bluish grey, highly to completely
weathered.

22-27m

Siltstone interbeded with slate, grey,


bluish grey, highly to completely
weathered.

27-32m

Siltstone interbeded with slate, grey,


bluish grey, highly to completely
weathered.

32-37m

Siltstone interbeded with slate, grey,


bluish grey, highly to completely
weathered.

37-40m

Siltstone interbeded with slate, grey,


bluish grey, highly to completely
weathered.

40-45m

Slate interbeded with siltstone,


blackish grey, moderately to highly
weathered, weak to very weak.

Borehole off shore

Page 21

Photographs of Core-Box

Appendix 4
Slate interbeded with siltstone,
blackish grey, moderately to highly
weathered, weak to very weak.

45-49m

49-50m

Borehole off shore

Slate interbeded with siltstone,


blackish grey, moderately to highly
weathered, weak to very weak.

Page 22

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B05


No.

Depth, m

Photograph

Description

16-20m

Slate,
blackish
grey,
grey,
moderately weathered, REC=50%,
highly fractured, very week.

20-24m

From 22.6 to 24m: Slate interbeded


with siltstone contains quartz, grey,
whitish grey, moderately weathered,
REC=80%, highly fractured, week to
moderately strong.

24-28m

Slate interbeded with siltstone grey,


blackish
grey,
moderately
weathered,
REC=80%,
highly
fractured,
week to moderately
strong.

28-32m

Slate interbeded with siltstone grey,


whitish
grey,
yellowish
grey,
moderately weathered, REC=80%,
highly fractured, week to moderately
strong.

32-36m

Slate interbeded with siltstone grey,


whitish
grey,
yellowish
grey,
moderately weathered, REC=7080%, highly fractured, week to
moderately strong.

36-40m

Slate interbeded with siltstone, grey,


whitish grey, moderately weathered,
REC=80%, highly fractured, week to
moderately strong

40-44m

From 40 to 41.2m: Slate, siltstone


alternated with tuff, grey, whitish
grey,
moderately
to
highly
weathered,
REC=80%,
highly
fractured,
week to moderately
strong.
From 41.2 to 44m: Slate siltstone
alternated with tuff contains quartz,
reddish brown, yellow, white, highly
weathered,
REC=30%,
highly
fractured, moderately strong.

Borehole off shore

Page 23

Photographs of Core-Box

Appendix 4

44-48m

Slate, siltstone alternated with tuff,


reddish brown, yellow, grey white,
highly weathered, REC=30%, highly
fractured, moderately strong.

48-50

Slate, siltstone alternated with tuff,


reddish brown, yellow, white, highly
weathered,
REC=30%,
highly
fractured, moderately strong.

Borehole off shore

Page 24

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE BB6


No.

Depth, m

24-28

Photograph

Description
Slate contains quartzite vein, white,
yellow,
reddish
brown,
highly
weathered
REC=40-50%,
highly
fractured,
weak to moderately
strong.

28-32

From 28 to 31: Slate contains


quartzite
vein,
yellow,
reddish
brown,
whitish
grey,
highly
weathered,
REC=30%, highly to
fractured,
weak to moderately
strong.
From 31 to 32m: Slate interbeded
with siltstone, blackish grey, slightly
weathered, REC=40%, moderately

32-36

Slate interbeded with siltstone, grey,


blackish grey, slightly weathered,
REC=90%, moderately strong.

36-40

From 36 to 36.8: Slate interbeded


with siltstone, grey, blackish grey,
slightly
weathered,
REC=90%,
moderately strong.
From 36.8 to 40m: Slate interbeded
with
siltstone,
yellowish
grey,
brownish grey, highly weathered,
RQD=30-50%, REC=90-100%

Borehole off shore

Page 25

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B7


No.

Depth, m

Photograph

Description

13-17m

Clay into sand, whitish to yellowish


grey weathered from claystone,
sandstone. RQD = 0%, REC = 90100%.

17-21m

Clay into sand, whitish to yellowish


grey weathered from claystone,
sandstone. RQD = 0%, REC = 90100%.

21-25m

21.0 21.8m: Clay into sand,


whitish to yellowish grey weathered
from claystone, sandstone. RQD =
0%, REC = 90-100%
21.8 25m: Shale, dark grey, bluish
grey, highly weathered, highly
fractured. RQD = 10-40%, REC =
80-100%.

25-29m

Shale, dark grey, bluish grey, highly


weathered, highly fractured. RQD =
10-50%, REC = 80-100%.

29-33m

29 31.7m: Shale, dark grey, bluish


grey, highly weathered, highly fractured.
RQD = 10-50%, REC = 80-100%.
31.7 33m: Silty sandstone alternated
with volcanic tuff, yellowish grey,
yellowish - whitish brown, highly to
moderate weathered. RQD=30%, REC =
80%. FI > 20

33-37m

Silty sandstone alternated with tuff,


yellowish grey, yellowish - whitish
brown,
highly
to
moderate
weathered. RQD=10-35%, REC =
80%.

37-40m

Silty sandstone alternated with tuff,


yellowish grey, yellowish - whitish
brown, bluish grey, highly to
moderate weathered. RQD=50-55%,
REC = 80%.

Borehole off shore

Page 26

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE BB8


No.

Depth, m

Photograph

Description

17-21

Siltstone interbeded with slate, grey,


whitish grey, yellow,
moderately
weathered,
RQD=30-40%,
REC=90%, weak to moderately
strong

21-25

From
21
to
12.7:
Siltstone
interbeded
with
slate,
grey,
yellowish
grey,
moderately
weathered, RQD=40%, REC=90%,
weak to moderately strong.
From 21.7 to 25m: Siltstone
interbeded with slate, blackish grey,
slightly
weathered,
RQD=10%,
REC=95%, weak to moderately
strong.

25-29

From 25 to 26.7: Sandstone


interbeded with slate, blackish grey,
slightly weathered, RQD=10-20%,
REC=100%., moderately strong.
From
26.7
to
29:
Siltstone
interbeded
with
slate,
grey,
yellowish grey, moderately to highly
weathered, REC=90% weak to
moderately strong.

29-33

Sandstone interbeded with slate,


blackish grey, slightly weathered,
REC=90%, weak to moderately
strong.

33-37

From
33
to
35m:
Siltstone
interbeded with slate, blackish grey,
grey, REC=95%, weak.
From
35
t0
37m:
Siltstone
interbeded with slate, blackish grey,
RQD=20% REC=100%, moderately
strong.

37-40

Siltstone interbeded with slate,


blackish grey, grey, RQD=20%
REC=100%, moderately strong.

Borehole off shore

Page 27

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE BB09


No.

Depth, m

16-20

20-24

Photograph

Description
From
16
to
19m:
Siltstone
interbeded with slate, yellowish
grey,
highly
to
completely
weathered, REC=70%, very weak.
From
19
to
20m:
Siltstone
interbeded
with
slate,
reddish
brown, yellowish grey, whitish grey,
highly weathered, REC=50-70%,
moderately strong.

Siltstone interbeded with slate,


reddish brown, yellowish grey,
whitish grey, highly weathered,
REC=50-70% moderately strong.

24-28

From 24 to 25.8m: Siltstone


interbeded with slate, yellowish
grey, whitish grey, grey, highly to
moderately weathered, REC=80%,
moderately strong.
From 25.8 to 28m: Siltstone
interbeded with slate, grey, whitish
grey, slightly weathered, RQD=2030%, moderately strong to strong.

28-32

Siltstone interbeded with slate, grey,


whitish grey, slightly weathered,
RQD=30-40%, moderately strong to
strong.

32-36

Siltstone interbeded with slate, grey,


whitish grey, slightly weathered,
RQD=20-30%, moderately strong to
strong.

36-40

Siltstone interbeded with slate, grey,


whitish grey, slightly weathered,
RQD=30-40%, moderately strong to
strong.

Borehole off shore

Page 28

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B10


No.

Depth, m

Photograph

Description

13-17m

Siltstone interbeded with slate,


yellowish grey, bluish grey, highly to
completely weathered

17-21m

Siltstone interbeded with slate,


yellowish grey, bluish grey, highly to
completely weathered

21-25m

From 21 to 23.3m: Siltstone


interbeded with slate, yellowish
grey,
bluish
grey,
highly
to
completely weathered.
From 23.3 to 25m: Rhyolite, bluish
grey, whitish grey, moderate to
highly weathered. RQD=0-20%, REC
= 80%

25-29m

Rhyolite, bluish grey, whitish grey


moderate to highly weathered.
RQD=0-65%, REC = 80%

29-33m

Rhyolite, bluish grey, whitish grey


moderate to highly weathered.
RQD=25-60%, REC = 80%

3334.7m

Rhyolite, bluish grey, whitish grey


moderate to highly weathered.
RQD=35-90%, REC = 100%

Borehole off shore

Page 29

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B11


No.

Depth,
m

9-13

Photograph

Description

Silty clay with gravel, brownish


grey, hard state, decomposed
from slate, siltstone.

13-17

Sandy silty clay with gravel,


brownish
grey,
hard
state,
decomposed
from
slate,
siltstone.

17-21

Slate interbeded with siltstone,


bluish
grey,
blackish
grey,
reddish brown, highly weathered,
RQD=10%,
REC=90%,
moderately strong.

21-25

From 21 to 24.5m: Siltstone


interbeded with slate contains
quartz vein, grey, yellowish grey,
reddish brown, highly weathered,
RQD=10%,
REC=95%,
moderately strong.
From 23-25m: Slate interbeded
with
siltstone,
bluish
grey,
whitish
grey,
moderately
weathered,
RQD=20-40%,

25-29

Slate interbeded with siltstone


contains quartz vein, bluish grey,
whitish
grey,
moderately
weathered,
RQD=20-40%,
REC=100%, strong.

29-33

Slate interbeded with siltstone


contains quartz vein, bluish grey,
whitish
grey,
moderately
weathered,
RQD=20-40%,
REC=100%, strong.

33-37

Slate interbeded with siltstone


contains quartz vein, bluish grey,
whitish
grey,
moderately
weathered,
RQD=20-40%,
REC=100%, strong.

Borehole off shore

Page 30

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B12


No.

Depth, m

Photograph

Description

14-17m

Siltstone interbeded with slate,


highly weathered, bluish grey, dark
grey, brownish grey, brown highly
fractured, RQD=0%, REC=70-80%

17-21m

Siltstone interbeded with slate,


moderately weathered, bluish grey,
dark
grey,
highly
fractured,
RQD=20%, REC=70-80%

21-23m

Siltstone interbeded with slate,


moderately weathered, bluish grey,
dark
grey,
highly
fractured,
RQD=20%, REC=70-80%

Borehole off shore

Page 33

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B13


No.

Depth,
m

11-13

13-17

17-21

21-25

25-29

29-33

33-37

37-41

Borehole off shore

Photograph

Description

Rhyolite, white, grey, yellow,


reddish
brown,
highly
to
completely weathered, REC=70%.

Rhyolite, grey, yellow, reddish


brown,
whitish
grey,
highly
weathered,
RQD=30-40%,
REC=95%.

Rhyolite, grey, yellow, reddish


brown,
whitish
grey,
highly
weathered,
RQD=30-40%,
REC=95%.

Rhyolite contains quartz vein,


grey,
yellow,
reddish brown,
whitish grey, highly to moderately
weathered,
RQD=50-60%,
REC=100%.

Rhyolite, grey, yellow, reddish


brown, whitish grey, moderately
weathered,
RQD=30-40%,
REC=95%.

Rhyolite,
grey,
whitish
grey,
moderately weathered, RQD=3040%, REC=100%.

Rhyolite,
grey,
whitish
grey,
moderately weathered, RQD=2030%, REC=100%.

Rhyolite,
grey,
whitish
grey,
moderately weathered, RQD=2030%, REC=100%.

Page 32

Photographs of Core-Box

41-42

Borehole off shore

Appendix 4

Rhyolite,
grey,
whitish
grey,
moderately weathered, RQD=20,
REC=95%.

Page 33

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B14


No.

Depth, m

1-6

6-10

Photograph

Description
From 1 to 5m: Rhyolite, grey,
yellow, reddish brown, completely
weathered.
From 5 to 6m: Rhyolite, grey,
whitish grey, yellow, reddish brown,
highly
weathered,
RQD=30%,
REC=100%.

Rhyolite, grey, whitish grey, yellow,


reddish brown, highly weathered,
RQD=20-30%, REC=100%.

Rhyolite, white, whitish grey, grey,


moderately weathered, RQD=3040%, REC=100%, highly fractured.

10-14

14-18

Rhyolite, grey, yellowish grey,


slightly to moderately weathered.
RQD=40-50%, REC=100%.

20-23

Rhyolite, grey, yellowish grey,


slightly to moderately weathered.
RQD=40-50%, REC=100%.

Borehole off shore

Page 34

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B15


No.

Depth,
m

3-8

Rhyolite, yellow, reddish brown,


whitish grey, highly weathered,
RQD=20-30%, REC=90%.

8-13

From 3 to 9m: Rhyolite, yellow,


whitish
grey,
moderately
weathered,
RQD=20-30%,
REC=90%.
From 9 to 13m: Rhyolite, grey,
whitish grey, bluish grey, slightly
weathered,
RQD
=50-60%,
REC=100%,

13-18

18-23

23-28

28-33

33-38

Borehole off shore

Photograph

Description

From 13 to 15m: Rhyolite, grey,


whitish grey, bluish grey, slightly
weathered,
RQD
=50-60%,
REC=100%.
From 15 to 17m: Rhyolite, yellow,
whitish grey, moderately to highly
weathered,
RQD=10-20%,
REC=95%.
From 17 to 18m: Rhyolite, grey,
whitish grey, bluish grey, slightly
weathered,
RQD
=60%,
REC=100%.

Rhyolite, white, whitish grey,


grey,
highly
to
moderately
weathered, REC=95%.

Rhyolite, white, whitish grey,


grey, highly weathered, RQD=2030%, REC=95%.

Rhyolite, yellow, whitish grey,


moderately to highly weathered,
RQD=20-30%, REC=95%.

Rhyolite, white, whitish grey,


grey,
highly
weathered,
REC=95%, highly fractured.

Page 35

Photographs of Core-Box

Appendix 4

38-43

Rhyolite, white, yellowish grey,


grey,
highly
weathered,
REC=95%, highly fractured.

43-48

From 43 to 46m: Rhyolite, white,


whitish
grey,
grey,
highly
weathered,
REC=95%,
highly
fractured.
From 46 to 48m: Rhyolite, white,
whitish grey, grey, moderately
weathered,
RQD=30-50%,
REC=95%.

10

48-50

Rhyolite, white, whitish grey,


grey, moderately weathered,
RQD=30-50%, REC=95%.

Borehole off shore

Page 36

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE B16


No.

Depth, m

Photograph

Description

4-9

Rhyolite whitish grey, black, reddish


brown, moderately to highly weathered,
RQD=40-50%, REC=95%.
From 4 to 6m: RQD=30%, REC=50%
From 7 to 9m: RQD=20%, REC=95%

9-14

Rhyolite, whitish grey, blackish grey,


yellow, moderately weathered, RQD=4070%, REC=85%.

14-19

Rhyolite, whitish grey, blackish grey,


slightly weathered,
From 14 to 18m: RQD=60-70%,
REC=95%
From 18 to 19: RQD=30%, REC=100%

19-24

Rhyolite, whitish grey, blackish grey,


slightly
weathered,
RQD=50-80%,
REC=90-100%.

24-28

Rhyolite, blackish grey, whitish grey,


slightly
weathered,
RQD=40-60%,
REC=95-100%

Borehole off shore

Page 37

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE C02


No.

Depth, m

Photograph

Description

13-15

Rhyolite, yellow, yellowish grey, highly to


completely weathered, REC=100%.

Borehole off shore

Page 38

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE D01


No.

Depth, m

Photograph

Description

09-13

Slate, grey, blackish grey, highly


weathered, REC=5%, very weak.

13-17

Slate, grey, blackish grey, highly


weathered, REC=5%, very weak.

17-21

Slate, grey, blackish grey, highly


weathered, REC=5%, very weak.

21-25

Slate, grey, blackish grey, highly


weathered, REC=5%, very weak.

25-29

Slate, grey, blackish grey, highly


weathered, REC=5%, very weak.

29-33

Slate interbeded with siltstone,


blackish grey, REC=20%, weak to
very weak.

33-37

37-40

Borehole off shore

From 33 to 35m: Slate interbeded


with
siltstone,
blackish
grey,
REC=20%, weak to very weak.
From 35-40m: Slate interbeded with
siltstone, blackish grey, moderately
weathered, RQD=10%, REC=60%,
weak.

Slate interbeded with siltstone,


blackish
grey,
moderately
weathered, RQD=10%, REC=60%,
weak.

Page 39

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE D02


No.

Depth, m

Photograph

Description

4-8

Slate interbeded with siltstone,


whitish grey, reddish brown, highly
to completely weathered, REC=60%,
weak.

8-12

From 8 to 11: Slate interbeded with


siltstone, grey, whitish grey, highly
weathered,
REC=40%,
highly
fractured, moderately strong.
From 11 to 12m: Rhyolite, whitish
grey, grey, moderately weathered,
RQD=70-90%, REC=100%.

12-16

Rhyolite,
whitish
grey,
grey,
moderately weathered, RQD=7090%, REC=100%.

16-20

Rhyolite, whitish grey, grey, yellow,


lightly to moderately weathered,
16 to 19m: RQD=80%, REC=100%,
19 to 20: RQD=30%, REC=100%,

20-24

Siltstone interbeded with slate,


whitish grey, grey, moderately
weathered, REC=70-80%, highly
fractured, moderately strong.

24-28

Siltstone interbeded with slate,


whitish grey, grey, moderately
weathered, REC=20-30%, highly
fractured,
weak to moderately
strong.

28-32

Siltstone interbeded with slate,


whitish
grey,
grey,
highly
weathered, REC=70-80%, highly
fractured, moderately strong.

Borehole off shore

Page 40

Photographs of Core-Box

32-36

36-40

Borehole off shore

Appendix 4
Siltstone interbeded with slate,
whitish
grey,
grey,
lightly
weathered,
REC=70-80%,
moderately strong.

Siltstone interbeded with slate,


whitish
grey,
grey,
lightly
weathered,
REC=50-70%,
moderately strong.

Page 41

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE D03


No.

Depth, m

Photograph

Description

10-14

Slate interbeded with siltstone,


blackish
grey,
moderately
weathered, REC=95%, weak.

14-18

Slate interbeded with siltstone,


blackish grey, slightly weathered,
REC=95%, moderately strong.

18-22

Slate interbeded with siltstone


contains quartz, blackish grey,
whitish grey, slightly weathered,
REC=20%, REC=90%, moderately
strong to strong.

22-26

Slate interbeded with siltstone


contains quartz, blackish grey, grey,
slightly weathered, RQD=10-20%,
REC=90%, moderately strong to
strong.

26-30

Slate interbeded with siltstone


contains quartz, blackish grey, grey,
slightly weathered, RQD=10-20%,
REC=90%, moderately strong to
strong.

30-34

Slate interbeded with siltstone


contains quartz, blackish grey, grey,
slightly weathered, RQD=10-20%,
REC=90%, moderately strong to
strong.

34-38

Slate interbeded with siltstone


contains quartz, blackish grey,
slightly weathered, RQD=10-20%,
REC=90%, moderately strong to
strong.

38-40

Slate interbeded with siltstone


contains quartzite, blackish grey,
grey, slightly weathered, RQD=10%,
REC=85%, moderately strong to
strong.

Borehole off shore

Page 42

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE D04


No.

Depth, m

5-9

Slate, whitish grey, reddish brown,


highly weathered, REC=50%, very
weak.

9-13

Slate, whitish grey, grey, reddish


brown, highly weathered, REC=50%,
very weak.

13-17

Slate, blackish grey, grey, REC=50%,


very weak

17-21

Slate,
blackish
grey,
REC=50%m very weak

grey,

21-25

Slate,
blackish
grey,
REC=50%m very weak

grey,

25-29

Slate,
blackish
grey,
REC=50%m very weak

grey,

29-33

Slate, whitish grey, grey, REC=50%,


moderately strong.

33-37

Slate, whitish grey, grey, REC=50%,


moderately strong.

Borehole off shore

Photograph

Description

Page 43

Photographs of Core-Box

37-40

Borehole off shore

Appendix 4

Slate, whitish grey, grey, REC=50%,


moderately strong.

Page 44

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE D05


No.

Depth, m

Photograph

Description

6-10

Siltstone interbeded with slate,


reddish brown, yellowish grey, highly
weathered, REC=70-100%, weak to
moderately strong.

10-14

From 10 to 11m: Sandstone,


siltstone interbeded with slate,
reddish brown, yellowish grey, highly
weathered, RQD=30%, REC=95%
moderately strong.
From 11 to 14: Sandstone, siltstone
interbeded with slate, yellowish
grey, grey, REC=50%, weak to
moderately strong.
From 14 to 17m: Sandstone,
siltstone interbeded with slate, grey,
yellow, grey highly weathered,
RQE=50%, weak.
From 17 to 18m: Sandstone,
siltstone interbeded with slate,
reddish
brown,
yellow,
grey,
moderately weathered, RQD=3040%, REC=95%.
From 18 to 21.2. Sandstone,
siltstone interbeded with slate,
reddish brown, yellow, grey, whitish
grey,
moderately
weathered,
RQD=30-40%, REC=95%.
From
21.2
to
22:
Siltstone
interbeded
with
slate,
grey,
yellowish grey, slightly weathered,
REC=100%, weak.

14-18

18 - 22

22-26

Slate, whitish grey, yellowish grey,


slightly
weathered,
REC=40%,
highly fractured, very weak.

26-30

Slate, whitish grey, yellowish grey,


slightly
weathered,
REC=30%,
highly fractured, very weak.

30-34

Slate, whitish grey, yellowish grey,


slightly
weathered,
REC=40%,
highly fractured, very weak.

Borehole off shore

Page 45

Photographs of Core-Box

Appendix 4
Slate, whitish grey, yellowish grey, lightly
weathered, REC=50-70%, very weak to
moderately strong.

34-38

38 -40

Borehole off shore

Sandstone, siltstone sandwich slate,


whitish grey, slightly weathered,
REC=100%, weak to moderately
strong

Page 46

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L1


No.

Depth, m

Photograph

Description

30-35m

Siltstone, sandstone interbeded with


slate, yellowish grey, bluish grey,
highly to completely weathered

35-40m

Siltstone,
sandstone
interbeded,
dark to bluish grey, highly fractured
and weathered. RQD=0%, REC =
70-80%

40-45m

Siltstone,
sandstone
interbeded,
dark to bluish grey, highly fractured
and weathered. RQD=0%, REC =
70-80%

45-50m

Siltstone,
sandstone
interbeded,
dark to bluish grey, highly fractured
and weathered. RQD=0%, REC =
70-80%

50-55m

Siltstone,
sandstone
interbeded,
dark to bluish grey, highly fractured
and weathered. RQD=0%, REC =
70-80%

55-60m

From
55
to
59m:
Siltstone,
sandstone interbeded, dark to bluish
grey,
highly
fractured
and
weathered. RQD=0%, REC = 7080%
From 59 to 60m: Rhyolite, bluish
grey,
moderately
weathered.
RQD=0%, REC = 70-80%

Borehole off shore

Page 47

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L2


No.

Depth, m

Photograph

Description

15-20m

Very
soft
marine
sandy-clay,
brownish grey, bluish grey.

20-25m

Very
soft
marine
sandy-clay,
brownish grey, bluish grey.

25-30m

Very stiff to medium intermediate


clay, brownish grey.

30-35m

Clay to sand, whitish to yellowish


grey
weathered
from
siltstone
alternated with volcanic tuff

35-40m

Clay to sand, whitish to yellowish


grey
weathered
from
siltstone
alternated with volcanic tuff

Borehole off shore

Page 48

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L03


No.

Depth, m

Photograph

Description

14-18

Siltstone interbeded with slate,


reddish brown, yellow, whitish grey,
highly to completely weathered,
REC=50-60%, weak to very weak.

18-22

Siltstone interbeded with slate,


reddish brown, yellow, whitish grey,
highly to completely weathered,
REC=50-60%, weak to very weak.

22-26

Siltstone interbeded with slate,


reddish brown, yellow, whitish grey,
highly to completely weathered,
REC=50-60%, weak to very weak.

26-30

Siltstone interbeded with slate,


reddish brown, yellow, whitish grey,
highly to completely weathered,
REC=50-60%, weak to very weak.

30-34

Slate interbeded with siltstone, grey,


whitish
grey,
yellow,
highly
weathered, REC=60%, very weak.

34-38

Slate interbeded with siltstone, grey,


whitish
grey,
yellow,
highly
weathered, REC=60%, very weak.

38-42

Slate interbeded with siltstone, grey,


whitish
grey,
yellow,
highly
weathered, REC=60%, very weak.

42-46

Sandstone interbeded with slate,


white, whitish grey, reddish brown,
highly
weathered,
RQD=10%,
REC=90%, weak to moderately
strong.

Borehole off shore

Page 49

Photographs of Core-Box

10

11

Appendix 4

46-50

From 46 to 48m: Slate interbeded


with siltstone, grey, whitish grey,
yellow, highly weathered, RQD=3040%, REC=100%, weak.
From48 to 50m: Slate with tuff,
grey, whitish grey, reddish brown,
highly weathered, REC=95%, weak
to very weak.

50-54

Slate interbeded with sandstone,


with tuff, grey, whitish grey,
moderately weathered, RQD=1020%,
REC=100%,
moderately
strong.

54-56

Slate interbeded with sandstone,


with tuff, grey, whitish grey,
moderately weathered, RQD=1020%,
REC=100%,
moderately
strong.

Borehole off shore

Page 50

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L04


No.

Depth, m

Photograph

Description

20-24

Sandstone, siltstone interbeded with slate,


yellow, reddish brown, highly weathered,
REC=70%, weak.

24-28

Sandstone, siltstone interbeded with slate,


yellow, reddish brown, grey, highly
weathered, REC=85%, weak moderately
strong.

28-32

Sandstone, siltstone interbeded with slate,


grey, yellow, reddish brown, highly to
moderately weathered, REC=95%, weak
moderately strong.

32-36

Sandstone, siltstone interbeded with slate,


grey, yellow, reddish brown, highly to
moderately weathered, REC=100%, weak to
moderately strong.

36-40

Sandstone, siltstone interbeded with slate,


grey, yellow, reddish brown, highly to
moderately weathered, REC=100%, weak to
moderately strong.

Borehole off shore

Page 51

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L05


No.

Depth, m

Photograph

Description

18-22

Siltstone, sandstone interbeded with


slate, yellow, reddish brown, white,
whitish grey, highly to completely
weathered,
RQD=30-40%,
REC=70%, very weak.

22-26

Siltstone, sandstone interbeded with


slate, yellow, reddish brown, white,
whitish grey, highly to completely
weathered,
RQD=30-40%,
REC=70%, very weak.

26-30

Siltstone, sandstone interbeded with


slate, yellow, reddish brown, white,
whitish grey, highly to completely
weathered,
RQD=30-40%,
REC=70%, very weak.

30-34

Siltstone, sandstone interbeded with


slate,
yellow,
reddish
brown,
completely weathered, REC=30%.

34-38

From
34
to
35m:
Siltstone,
sandstone interbeded with slate,
yellow, reddish brown, highly to
completely weathered, REC=40%.
From 35 to 36.8m: Siltstone,
sandstone interbeded with slate,
yellow, reddish brown, whitish grey,
highly weathered, RQD=30-40%,
REC=90%.
From 36.8 to 38m: Siltstone
interbeded with slate, blackish grey,
reddish brown, yellow, moderately to
highly weathered, RQD=30-40%,
REC=100%, weak to moderately
strong.

38-40

Siltstone interbeded with slate,


blackish grey, reddish brown, yellow,
moderately to highly weathered,
RQD=30-40%, REC=100%, weak to
moderately strong.

Borehole off shore

Page 52

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L06


No.

Depth, m

12-16

16-20

Photograph

Description
From 12 to 13.6m: Quartz gravel
with clay, white, whitish grey.
From 13 to 16m: Silty clay, reddish
brown,
yellowish
grey,
white,
weathered from slate, siltstone.

Silty clay, reddish brown, yellowish


grey, white, weathered from slate,
siltstone.

20-24

Siltstone interbeded with slate,


yellow,
yellowish
grey,
highly
weathered,
RQD=20-30%,
REC=90%, weak to moderately
strong

24-28

Siltstone interbeded with slate,


yellow,
yellowish
grey,
highly
weathered,
RQD=10-20%,
REC=90%, weak to moderately
strong

28-32

Siltstone interbeded with slate,


yellow,
yellowish
grey,
highly
weathered,
RQD=20-30%,
REC=90%, weak to moderately
strong

32-36

From
33
to
36m:
Siltstone
interbeded with slate, yellowish
grey, highly weathered, RQD=1020%,
REC=90%,
weak
to
moderately strong

36-40

Siltstone interbeded with slate,


yellow,
yellowish
grey,
highly
weathered,
RQD=20-30%,
REC=90%, weak to moderately
strong

Borehole off shore

Page 53

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE L07


No.

Depth, m

Photograph

Description

21-25

Siltstone sandwich slate, yellow, whitish


grey, grey, reddish brown, highly
weathered, REC=30-50%, moderately
strong to strong

25-29

Siltstone sandwich slate, whitish grey,


yellow, highly weathered, REC=3050%, moderately strong to strong

29-33

Siltstone sandwich slate, whitish grey,


yellow, highly weathered, REC=3050%, moderately strong to strong

33-37

Siltstone sandwich slate, grey, whitish


grey, moderately weathered, REC=4050%, moderately strong.

37-40

Siltstone sandwich slate, grey, whitish


grey, moderately weathered, REC=4050%, moderately strong.

Borehole off shore

Page 54

Photographs of Core-Box

Appendix 4

PHOTOGRAPH AND DESCRIPTION OF BOREHOLE LL08


No.

Depth, m

Photograph

Description

22-26

Silty clay with quartz, red, reddish


brown, whitish grey, weathered from
slate, siltstone, quartzite, REC=90%,
very weak

26-30

Silty clay with quartz, red, reddish


brown, whitish grey, weathered from
slate, siltstone, quartzite, REC=90%,
very weak

30-34

From 30 to 30.6m: Siltstone


interbeded
with
slate,
grey,
yellowish grey, reddish brown, highly
weathered, REC=100%, weak to
very weak
From 30.6 to 34m: Siltstone
interbeded
with
slate,
grey,
yellowish
brown,
moderately
weathered, REC=50-60%, weak.

34-38

Slate interbeded with siltstone,


blackish
grey,
moderately
weathered,
REC=30%%,
highly
fractured, weak.

38-42

Slate interbeded with siltstone,


blackish
grey,
moderately
weathered,
REC=30%%,
highly
fractured, weak.

42-46

Slate interbeded with siltstone,


blackish
grey,
moderately
weathered,
REC=30%%,
highly
fractured, weak.

46-50

From 46 to 48.3m: Slate interbeded


with
siltstone,
blackish
grey,
moderately weathered, REC=40%,
highly fractured, weak.
From 48.3 to 50m: Quartzite with
slate, white, blackish grey, reddish
brown, highly weathered, REC=50%,
strong.

50-54

Siltstone interbeded with slate,


quartzite, yellow, reddish brown,
whitish grey, highly weathered, REC80%, weak to moderately strong.

Borehole off shore

Page 55

Photographs of Core-Box

54-58m

Appendix 4
Siltstone interbeded with slate,
quartzite, yellow, reddish brown,
whitish grey, highly weathered, REC80%, weak to moderately strong.

58-62m

Siltstone interbeded with slate,


quartzite, yellow, reddish brown,
whitish grey, highly weathered, REC80%, weak to moderately strong.

62-66m

Siltstone interbeded with slate,


quartzite, yellow, reddish brown,
whitish grey, highly weathered, REC80%, moderately strong.
From
62
to
64m:
Siltstone
interbeded with slate, grey, blackish
grey,
moderately
weathered,
REC=80%, moderately strong.

66-70m

Siltstone interbeded with slate, grey,


blackish
grey,
RQD=10-20%.
REC=90%, strong.

70-74m

Siltstone interbeded with slate, grey,


blackish
grey,
RQD=10-20%.
REC=90%, strong.

74-78m

From
74
to
76m:
Siltstone
interbeded with slate, grey, blackish
grey, RQD=10-20%. REC=95-100%,
strong.
From 76 to 78m: slate, blackish
grey,
REC=50%,
weak
to
moderately weak.

78-80m

Quartzite,
white,
moderately
weathered, RQD=20%, very strong

Borehole off shore

Page 56

APPENDIX 5: SUMMARY OF SOIL LABORATORY TESTING


RESULTS
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Ph lc - Appendix 5-1/26

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Phng a K thut & Kim nh Cng trnh - Geotech Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM T KHU VC DI NC


SUMMARY OF SOIL LABORATORY TESTING RESULTS OFFSHORE
Cng trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Ngy - Date:

24.2

26.8

0.1

A1-S4

5.55 - 6.00

A1-S5

7.05 - 7.50

A1-T1

8.50-9.30

19.4

11.1

36.3

6.9

26.3

29.9

17.9

12.1

A1-S6

10.05 - 10.50

1.5

4.3

52.0

12.4

29.8

21.8

21.4

0.4

A1-S7

11.55 - 12.00

72.6

15.2

11.1

0.2

A1-S8

13.05 - 13.50

A1-S9

14.55 - 14.93

A2-S3

0.3

K hiu - Symbol

bo ha Deg. of Saturation

H s rng
- Void ratio

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

st - Liquidity

Ch s do
- Plasticity Index

Gii hn do
- Plastic Limits, %

Gii hn chy
- Liquid Limits, %

<0.002

0.005-0.002

0.075-0.005

0.425-0.075

2.0-0.4250
11.7

St-Clay

Tnh cht vt l - Physical Properties

SM

M t
Description

SPT

10.3

Bi-Silt

Gii hn Atterberg

Lp- Layer

26.8

Ct-Sand

4.75-2.0

19.0-4.75

Sn-Gravel

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %

31

26.6

1.90

1.50

2.66

43.6

0.773

91.5

19.9

2.04

1.70

2.66

36.1

0.566

93.7

1.88

40.6

1.78

1.27

2.68

52.6

1.109

98.0

CL

Sandy lean clay, low plasticity, medium stiff

68.31

51.2

1.70

1.12

2.67

58.1

1.388

98.6

ML

Silt, low plasticity, medium stiff

0.8

18.8

2.02

1.70

2.67

36.2

0.568

88.5

SM

Silty Sand, medium dense state

5b

19

Silty sand with gravel, loose state

12.1

16.2

31.0

12.2

28.0

0.1

0.4

14.5

2.17

1.89

2.64

28.3

0.394

96.7

SM

Silty Sand, dense state

L1

36

17.0

25.3

13.6

6.5

31.9

0.2

0.5

10.4

2.29

2.07

2.67

22.5

0.290

95.4

SM

Silty sand with gravel, dense state

L1

50

4.05 - 4.50

2.3

66.6

28.7

0.5

2.0

27.6

1.96

1.53

2.67

42.7

0.746

98.9

SM

Silty Sand, dense state

35

A2-S4

5.55 - 6.00

1.5

65.5

30.2

0.6

2.2

23.2

2.03

1.64

2.66

38.5

0.625

98.8

SM

Silty Sand, dense state

33

A2-S5

7.05 - 7.50

11.1

75.3

12.7

0.0

0.9

21.8

1.98

1.62

2.68

39.5

0.653

89.3

SM

Silty Sand, dense state

33

A2-S6

8.55 - 9.00

12.2

73.0

13.6

0.1

1.1

19.8

2.03

1.70

2.63

35.5

0.550

94.8

SM

Silty Sand, dense state

32

A2-S7

10.05 - 10.50

3.0

55.8

12.7

28.5

48.3

22.5

25.8

0.83

43.9

1.77

1.23

2.67

54.0

1.174

99.9

CL

Lean clay, intermediate plasticity, soft

A2-T1

11.50 - 12.30

5.7

41.8

12.6

40.0

52.1

21.5

30.6

0.78

45.3

CH

Fat clay, high plasticity, soft

A2-S8

12.30 - 12.75

5.5

57.7

11.7

25.1

46.5

23.6

22.9

0.77

41.3

1.77

1.25

2.64

52.7

1.113

98.0

CL

Lean clay, intermediate plasticity, soft

A2-S9

13.05 - 13.50

4.7

57.3

12.7

25.3

47.6

22.3

25.4

0.92

45.6

1.75

1.20

2.68

55.2

1.231

99.2

CL

Lean clay, intermediate plasticity, soft

A2-S11

16.05 - 16.50

17.0

65.9

15.0

0.3

1.9

14.4

2.17

1.90

2.66

28.5

0.398

96.2

SM

Silty Sand, medium dense state

5b

27

10

A2-S12

17.55 - 18.00

19.7

79.4

0.3

0.1

0.0

13.7

2.19

1.93

2.64

27.0

0.369

97.9

SP

Poorly-graded sand, medium dense state

5b

28

11

A3-S3

4.05 - 4.50

13.5

2.24

1.97

2.70

27.1

0.371

98.2

31

12

A3-S4

5.55 - 6.00

12.6

2.27

2.01

2.70

25.6

0.344

98.7

SP

Poorly-graded sand, medium dense state

17

13

A3-S5

14

5.0

0.5

2.3

29.2

11.2

32.3

1.4

10.0

7.05-7.50

0.6

1.7

31.7

18.3

47.7

38.1

23.1

15.1

0.14

25.2

2.01

1.61

2.72

40.7

0.687

99.8

CL

Lean clay, intermediate plasticity, stiff

A3-S6

8.55-9.00

8.6

5.8

31.6

14.4

39.6

35.8

23.7

12.1

0.75

32.8

1.89

1.43

2.76

48.1

0.928

97.3

CL

Lean clay, intermediate plasticity, stiff

12

15

A3-S7

10.05-10.50

10.4

8.6

37.9

14.0

29.1

24.3

16.5

7.8

1.54

28.5

1.97

1.53

2.74

44.1

0.790

98.7

CL

Lean clay with sand, low plasticity, stiff

12

16

A3-S8

11.55-12.00

9.0

12.6

46.1

7.8

24.5

23.7

15.3

8.4

1.09

24.5

2.02

1.62

2.71

40.2

0.671

98.7

CL

Lean clay with sand, low plasticity, stiff

12

17

A4-S3

4.05 - 4.50

0.9

5.2

86.4

0.7

6.8

23.4

2.00

1.62

2.71

40.1

0.670

94.4

CL

Lean clay with sand, hard

2b

38

18

A4-S4

5.55 - 6.00

4.6

83.5

10.8

1.1

0.0

25.1

1.93

1.55

2.69

42.3

0.734

91.9

SM

Silty sand, loose state

19

A4-S5

7.05 - 7.50

12.5

18.6

19.8

0.0

0.3

7.8

2.29

2.13

2.68

20.6

0.259

80.8

SM

Silty sand with gravel, very dense state

65

19.6

14.4

13.6

2.70

14.8

Ph lc - Appendix 5-2/26

SPT

98.6

CL

Sandy lean clay, low plasticity, hard

0.268

78.3

GM

Silty gravel with sand, very dense state

L1

54

2.68

GM

Silty gravel with sand, very dense state

L1

97

8.4

2.68

GM

Silty gravel with sand, very dense state

L1

63

5.4

17.5

2.67

ML

Gravelly silt with sand, hard

L1

63

0.0

1.8

24.8

2.00

1.60

2.70

40.8

0.688

97.5

SM

Silty Sand, medium dense state

23

14.0

0.0

1.3

16.6

2.16

1.85

2.70

31.4

0.457

97.9

SM

Silty Sand, dense state

30

29.6

11.8

1.3

0.0

14.8

2.21

1.92

2.69

28.5

0.399

99.7

SM

Silty Sand, very dense state

58

28.9

19.7

20.4

0.1

0.4

9.6

2.24

2.04

2.67

23.5

0.307

83.1

SM

Silty Sand, very dense state

207.25

4.1

40.8

23.2

17.9

2.6

11.4

32.4

17.6

14.9

0.12

19.3

2.11

1.77

2.78

36.4

0.573

93.8

SC

Clayey sand, low plasticity, medium dense state

17

15.9

6.8

4.6

28.9

11.0

32.8

41.3

20.7

20.6

0.16

24.0

1.96

1.58

2.80

43.5

0.771

87.2

CL

Lean clay with sand, intermediate plasticity, very stiff

29.8

13.6

12.9

11.8

29.4

0.8

1.8

14.8

2.22

1.94

2.76

29.7

0.422

96.8

SM

Silty sand with gravel, very dense state

L1

166.571

13.05 - 13.50

10.5

0.4

20.4

16.6

38.8

3.2

10.1

17.6

2.16

1.84

2.75

33.1

0.494

98.0

ML

Sandy silt, hard

L1

73

A5-S9

14.55 - 15.00

21.9

18.1

13.5

9.8

33.6

0.5

2.6

14.3

SM

Silty sand with gravel, very dense state

L1

92

36

A5-S10

16.05 - 16.50

3.2

6.9

7.9

28.8

45.6

1.5

6.1

12.2

2.20

1.96

2.71

27.6

0.381

86.7

SM

Silty sand with gravel, hard

L1

123

37

A6-S2

2.55 - 3.00

4.7

80.1

13.6

0.2

1.4

22.8

2.05

1.67

2.70

38.2

0.617

99.6

SM

Silty Sand, dense state

41

38

A6-S3

4.05 - 4.50

0.3

46.3

28.5

23.9

0.2

0.8

11.8

2.16

1.93

2.68

28.1

0.390

81.3

SM

Silty Sand, dense state

44

39

A6-S4

5.55 - 6.00

7.5

42.8

32.7

14.1

0.0

0.8

9.5

2.31

2.11

2.66

20.6

0.259

97.2

SM

Silty Sand, very dense state

90

40

A6-S5

7.05 - 7.35

1.4

24.3

60.5

12.8

0.0

1.0

12.9

2.23

1.98

2.69

26.3

0.357

96.9

SM

Silty Sand, very dense state

15/100

41

A6-S6

8.55 - 9.00

11.0

0.7

6.1

41.2

9.7

31.2

29.4

15.7

13.7

1.13

31.3

1.91

1.45

2.75

47.2

0.894

96.1

CL

Lean clay with sand, low plasticity, soft

2b

1.5

42

A6-S7

10.05 - 10.50

0.6

2.4

8.8

43.5

9.3

35.4

28.2

15.4

12.8

1.16

30.3

1.95

1.50

2.76

45.7

0.843

99.2

CL

Lean clay, low plasticity, soft

2b

43

A6-T1

11.5 - 12.4

0.2

4.9

50.2

10.0

34.8

35.5

18.5

17.0

0.97

35.0

1.85

1.37

2.77

50.5

1.021

95.0

CL

Lean clay, intermediate plasticity, medium stiff

2b

A6-S8

13.05 - 13.50

4.8

15.2

53.7

6.2

20.1

32.2

CL

Lean clay, medium stiff

2b

45

A6-S9

14.55 - 15.00

28.2

44.6

24.0

0.3

3.0

17.0

2.13

1.82

2.71

32.9

0.490

93.8

SM

Silty Sand, loose state

5b

46

A6-S10

16.05 - 16.50

25.4

52.2

20.6

0.5

1.4

19.8

2.02

1.68

2.73

38.4

0.624

86.4

SM

Silty Sand, loose state

5b

47

A6-S11

17.55 - 18.00

1.0

23.8

51.2

22.1

0.3

1.7

24.6

2.00

1.61

2.67

39.6

0.657

99.8

SM

Silty Sand, medium dense state

5b

14

48

A6-S12

19.05 - 19.50

17.0

30.7

15.0

31.2

0.0

2.5

17.0

2.10

1.80

2.72

33.8

0.510

90.6

SM

Silty Sand, medium dense state

5b

34

49

A6-S13

20.55 - 21.00

18.1

35.7

22.9

21.9

0.2

1.1

23.8

2.71

SM

Silty Sand, very dense state

L1

92

50

A6-S14

22.05 - 22.50

13.4

45.2

19.3

20.9

0.3

0.9

8.4

2.68

SM

Silty Sand, very dense state

L1

84

51

A6-S16

25.50 - 25.80

1.3

38.7

53.2

2.2

4.6

16.5

2.18

1.87

2.72

31.2

0.453

99.2

ML

Sandy silt, hard

L1

52

A7-S2

2.55 - 3.00

6.6

4.0

38.0

4.6

19.5

37.5

21.6

15.9

0.87

35.5

1.79

1.32

2.51

47.5

0.904

98.6

CL

Gravelly lean clay with sand, intermediate plasticity, stiff

2b

53

A7-S3

4.05 - 4.50

1.9

3.7

30.8

17.0

46.7

42.3

22.5

19.8

0.98

42.0

1.75

1.23

2.67

53.9

1.169

95.8

CL

Lean clay, intermediate plasticity, very stiff

2b

17

54

A7-S4

5.55 - 6.00

41.5

21.9

19.6

1.02

41.9

1.75

1.23

2.58

52.3

1.095

98.5

CL

Gravelly lean clay, intermediate plasticity, very stiff

L1

25

55

A7-S5

7.05 - 7.50

GM

Silty gravel with sand, very dense state

L1

60

56

A7-S6

8.55 - 9.00

SM

Silty sand with gravel, loose state

5b

20

A4-S6

8.55 - 9.00

14.1

25.9

16.0

14.8

27.1

0.3

1.9

21

A4-S7

10.05 - 10.50

5.5

21.1

3.4

7.3

33.7

7.3

21.7

22.2

15.5

6.8

22

A4-T1

11.0 - 11.9

9.3

22.6

43.7

3.5

21.0

27.6

10.0

17.6

23

A4-S8

13.05 - 13.50

26.5

23.3

17.6

4.6

8.2

19.3

0.1

24

A4-S10

14.55 - 15.00

24.2

14.7

12.1

8.3

11.8

27.7

25

A4-S11

17.55 - 18.00

41.6

17.9

11.5

2.1

4.6

26

A4-S12

19.05 - 19.50

28.6

8.6

3.9

27

A5-S2

2.55 - 3.00

28

A5-S3

4.05 - 4.50

1.7

29

A5-S4

5.55 - 6.00

30

A5-S5

7.05 - 7.50

31

A5-S6

8.55 - 9.00

32

A5-T1

10.0 - 10.9

33

A5-S7

11.55 - 11.95

34

A5-S8

35

44

9.2

2.25

2.06

2.66

22.4

0.289

84.2

0.45

18.5

2.13

1.80

2.71

33.6

0.506

0.39

17.0

2.14

1.83

2.67

31.5

0.4

7.8

2.29

2.12

2.69

21.1

0.1

1.1

6.8

21.3

0.2

0.9

6.2

45.6

1.6

5.5

72.3

20.4

6.4

41.6

35.0

1.0

1.0

55.2

11.7

18.9

2.2

3.7

22.0

19.5

H s rng
- Void ratio
0.460

<0.002

0.005-0.002

0.075-0.005

Sandy silty clay, low plasticity, hard

0.425-0.075

99.3 CL-ML

2.0-0.4250

51

4.75-2.0

19.0-4.75

Silty Sand, very dense state

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

5.4

29.7

5.9

4.0

4.5

37.1

3.8

15.0

42.1

16.5

3.4

5.2

13.3

0.0

0.1

6.7

17.5

14.0

25.1

12.7

28.6

0.4

1.7

15.0

2.74

2.74

2.64
2.17

1.89

2.64

28.5

0.398

99.5

SM

M t
Description

Ph lc - Appendix 5-3/26

10.05 - 10.50

4.5

58

A7-S8

11.55 - 12.00

59

AA7-S2

2.55 - 3.00

60

AA7-S3

4.05 - 4.50

61

AA7-T1

5.60 - 6.50

62

AA7-S4

6.55 - 7.00

63

AA7-S5

8.55 - 9.00

64

AA7-S6

10.05 - 10.50

65

AA7-S7

11.55 - 12.00

66

A8-S3

4.05-4.50

67

A8-T1

8.50-9.40

68

A8-S5

10.05-10.50

69

A8-S6

11.55-12.00

70

A8-S7

13.05-13.50

71

A8-S8

14.55-15.00

3.2

72

A8-S9

16.05-16.50

4.7

73

A8-S10

17.05-17.50

74

A9-S4

5.55 - 6.00

75

A9-T1

6.80 - 7.50

76

A9-S5

7.60 - 8.15

77

A9-S6

8.55 - 9.00

78

A9-S7

10.05 - 10.50

79

A9-S8

80

24.2

37.9

2.1

5.1

23.3

2.04

1.65

2.71

39.1

0.641

98.4

23.1

2.01

1.63

2.64

38.2

0.617

98.9

K hiu - Symbol

bo ha Deg. of Saturation

H s rng
- Void ratio

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Ch s do
- Plasticity Index

Gii hn do
- Plastic Limits, %

Gii hn chy
- Liquid Limits, %

<0.002

0.005-0.002

0.075-0.005

0.425-0.075

2.0-0.4250
26.3

Gii hn Atterberg
St-Clay

SM

M t
Description

Silty Sand, medium dense state

SPT

A7-S7

Bi-Silt

Lp- Layer

57

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

5b

23

5b

110

86.7

12.1

0.2

1.0

24.5

2.03

1.63

2.72

40.0

0.666

99.8

SM

Silty Sand, medium dense state

18

6.7

72.6

19.0

0.3

1.4

24.2

2.03

1.63

2.72

40.0

0.666

98.8

SM

Silty Sand, very loose state

7.8

20.0

47.2

6.1

19.0

25.1

1.98

1.58

2.70

41.5

0.710

95.5

CL

Lean clay with sand, low plasticity, very stiff

2b

1.6

42.8

25.6

23.9

1.0

5.1

15.4

2.15

1.86

2.69

30.9

0.448

92.8 SC-SM

Silty, clayey sand, medium dense state

24

1.0

5.5

20.7

56.9

4.4

10.8

18.5

2.04

1.72

2.71

36.4

0.573

87.3

ML

Sandy silt, very stiff

22

2.3

6.5

20.9

56.8

4.0

9.4

17.3

2.14

1.82

2.71

32.8

0.487

96.0

ML

Sandy silt, hard

73

5.9

20.9

59.6

4.5

9.1

19.5

2.12

1.77

2.79

36.5

0.574

94.6

ML

Silt with sand, hard

107

9.0

36.7

13.4

40.9

41.6

19.2

22.4

0.77

36.6

1.86

1.36

2.73

50.2

1.009

99.0

CL

Lean clay, intermediate plasticity, soft

2b

25.6

59.4

3.4

10.9

25.0

15.3

9.6

1.02

25.1

1.95

1.56

2.72

42.6

0.743

91.9

CL

Lean clay with sand, low plasticity, medium stiff

2b

76.8

4.1

19.1

19.6

11.9

7.8

1.02

19.7

2.08

1.74

2.69

35.3

0.545

97.3

CL

Lean clay, low plasticity, medium stiff

2b

1.4

25.0

18.7

54.9

55.2

25.5

29.7

-0.40

13.7

2.13

1.88

2.69

30.2

0.433

85.1

CH

Fat clay, high plasticity, hard

2b

36

13.1

49.9

30.1

1.3

5.6

SM

Silty sand, very loose state

5.6

31.7

26.2

26.2

0.6

6.5

14.5

37.0

25.4

17.9

0.1

0.4

35.5

45.0

2.5

17.0

22.7

19.1

3.6

46.7

28.8

2.8

17.0

35.3

18.0

5.1

26.5

12.7

55.7

47.6

2.4

42.0

35.0

2.0

18.7

1.3

3.6

40.3

11.5

2.0

6.3

32.5

11.55 - 12.00

4.1

A9-S9

13.05 - 13.50

81

A9-S10

14.55 - 15.00

82

A9-S12

17.00 - 17.45

16.9

24.1

83

A9-S13

20.00 - 20.23

2.9

84

A9-S14

32.50 - 32.83

38.6

85

A10-S3

86

0.7

0.7

24.5

14.8

9.7

1.06

10.8
15.3

2.20

1.87

2.65

29.6

0.420

96.7 SC-SM

Silty, clayey sand, low plasticity, loose state

12.1

2.20

1.96

2.64

25.9

0.349

91.6

SM

Silty Sand, medium dense state

28

-0.24

18.3

2.15

1.78

2.70

34.0

0.515

95.6

ML

Sandy silt, low plasticity, hard

14/100

17.2

0.01

18.2

2.13

1.80

2.69

33.1

0.494

98.8

SC

Clayey sand, intermediate plasticity, loose state

22.4

25.2

0.04

23.5

1.99

1.61

2.73

40.9

0.693

92.6

CL

Lean clay, intermediate plasticity, stiff

20.9

12.6

8.3

0.56

17.3

2.04

1.74

2.65

34.3

0.522

87.7

CL

Sandy lean clay, low plasticity, stiff

43.3

25.2

13.1

12.1

0.74

22.0

2.06

1.69

2.69

37.2

0.592

100.0

CL

Lean clay, low plasticity, very stiff

16

10.2

44.9

40.8

21.5

19.3

0.21

25.5

1.97

1.57

2.70

41.9

0.721

95.6

CL

Lean clay, intermediate plasticity, very stiff

15

37.4

12.4

46.1

32.7

17.3

15.4

0.28

21.6

2.07

1.70

2.69

36.9

0.585

99.3

CL

Lean clay, low plasticity, stiff

14

1.6

41.1

12.5

44.8

39.8

20.9

18.8

0.44

29.1

1.94

1.50

2.67

43.8

0.780

99.7

CL

Lean clay, intermediate plasticity, medium stiff

2.8

39.0

13.1

45.1

38.7

19.4

19.3

0.55

30.1

1.93

1.48

2.68

44.7

0.808

99.7

CL

Lean clay, intermediate plasticity, medium stiff

14.9

8.2

30.5

1.0

4.5

12.7

2.22

1.97

2.63

25.2

0.337

99.2

SM

Silty sand with gravel, dense state

L1

34

15.6

25.1

17.2

33.0

1.4

4.8

14.5

2.19

1.91

2.70

29.2

0.413

94.8

SM

Silty Sand, very dense state

5b

243.75

26.4

5.8

2.0

22.3

0.8

4.1

SM

Silty Sand, very dense state

6a

186

4.05 - 4.50

0.5

92.2

7.1

0.2

0.0

21.2

2.03

1.67

2.63

36.4

0.572

97.4 SP-SM

Poorly-graded sand with silt, very dense state

50

A10-S4

5.55 - 6.00

0.6

90.7

8.6

0.1

0.0

20.9

2.02

1.67

2.64

36.8

0.583

94.6 SP-SM

Poorly-graded sand with silt, very dense state

50

87

A10-S5

7.05 - 7.50

31.0

1.92

1.46

2.67

45.4

0.831

99.8

88

A10-S6-1

8.55 - 9.00(1)

1.0

89.6

8.8

0.1

0.6

25.0

1.94

1.55

2.65

41.5

0.710

93.4 SP-SM

Poorly-graded sand with silt, medium dense state

TKC

17

89

A10-S6

8.55 - 9.00

2.4

4.7

51.1

5.5

36.3

21.0

2.05

1.69

2.65

36.3

0.569

97.9

CL

Lean clay, stiff

90

A10-T1

9.5 - 10.3

3.8

14.9

54.2

4.4

22.7

11.6

9.6

2.0

4.86

19.5

2.08

1.74

2.70

35.6

0.552

95.3

ML

Silt with sand, low plasticity, stiff

91

A10-S7

11.55 - 12.00

4.2

20.0

49.9

1.7

17.5

21.1

14.0

7.2

1.06

21.6

2.03

1.67

2.65

37.0

0.588

97.2

CL

Sandy lean clay, low plasticity, stiff

92

A10-S8

13.05 - 13.50

6.5

16.7

48.7

2.8

25.3

21.4

14.8

6.5

1.25

23.0

2.05

1.66

2.71

38.7

0.632

98.7 CL-ML

Silty clay with sand, low plasticity, stiff

4.7

4.2

14.9

6.8

1.06

2.65

26.4

6.7

8.1

2.72

15.6

10.8

1.43

Ph lc - Appendix 5-4/26

SPT

1.18

19.3

2.09

1.76

2.68

34.4

0.524

98.7 CL-ML

Sandy silty clay, low plasticity, stiff

1.0

4.7

19.0

41.0

3.2

7.6

22.9

19.8

3.1

2.49

27.5

1.91

1.50

2.65

43.3

0.765

95.2 CL-ML

Sandy silty clay, low plasticity, stiff

8.2

30.4

42.9

16.3

0.2

1.4

13.1

2.24

1.98

2.69

26.4

0.359

98.4

SM

Silty Sand, very loose state

7.0

43.9

28.8

18.3

0.2

1.8

10.0

2.28

2.07

2.68

22.7

0.293

91.5

SM

Silty Sand, medium dense state

22

8.2

30.4

42.9

16.3

0.2

1.4

2.69

SM

Silty Sand, medium dense state

20

6.7

18.8

10.3

55.6

3.5

5.0

2.69

ML

Sandy silt, stiff

2b

12

9.60 - 10.50

1.2

3.2

37.0

13.5

45.1

48.4

25.4

23.0

0.19

29.8

1.96

1.51

2.76

45.4

0.830

99.3

CL

Lean clay, intermediate plasticity, stiff

2b

A15-S7

11.55 - 12.00

5.9

20.9

59.6

4.5

9.1

38.8

21.6

17.2

0.32

27.1

1.99

1.57

2.74

42.7

0.744

99.6

CL

Lean clay with sand, intermediate plasticity, stiff

2b

101

A15-S8

13.05 - 13.50

8.9

5.3

34.7

13.6

37.2

47.8

25.2

22.5

0.60

38.8

1.79

1.29

2.74

52.9

1.122

94.7

CL

Lean clay, intermediate plasticity, medium stiff

2b

102

A15-S9

14.55 - 14.95

1.3

2.2

37.4

25.0

34.2

51.9

23.1

28.8

0.62

41.0

1.77

1.25

2.74

54.4

1.192

94.2

CH

Fat clay, high plasticity, medium stiff

2b

>50

103

A16-S2

2.55 - 3.00

18.8

10.3

56.5

2.6

5.0

ML

Sandy silt, very soft

104

A16-S3

4.05 - 4.50

6.1

52.2

10.6

31.2

105

A16-S4

5.55 - 6.00

39.6

33.2

22.0

0.5

106

A16-S5

7.05 - 7.50

30.1

37.5

26.7

107

A16-S6

8.55 - 9.00

2.4

108

A16-S7

10.05 - 10.50

109

A16-T1

11.00 - 11.90

110

A16-S8

13.05 - 13.50

111

A16-S9

112

94

A10-S10

16.05 - 16.50

23.5

95

A15-S2

2.55 - 3.00

0.6

96

A15-S4

5.55 - 6.00

97

A15-S5

7.05 - 7.50

98

A15-S6

8.55 - 9.00

99

A15-T1

100

0.6

0.4

6.7

H s rng
- Void ratio

4.0

<0.002

14.6

0.005-0.002

18.6

0.075-0.005

13.4

14.55 - 15.00

0.425-0.075

4.0

A10-S9

2.0-0.4250

47.9

93

4.75-2.0

25.3

19.0-4.75

9.4

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

2.69
63.4

1.62

0.99

2.77

64.2

1.796

97.7

2.6

11.7

2.17

1.94

2.69

27.9

0.387

81.4

SM

Silty Sand, loose state

0.6

5.1

14.9

2.17

1.89

2.71

30.2

0.432

93.3

SM

Silty Sand, loose state

14.1

20.7

62.8

39.5

18.4

21.1

0.96

38.7

1.80

1.30

2.71

51.9

1.081

96.8

CL

Lean clay, intermediate plasticity, soft

7.2

39.7

11.6

40.1

41.0

12.0

29.0

0.71

32.7

1.90

1.43

2.72

47.4

0.902

98.6

CL

Lean clay, intermediate plasticity, stiff

10

0.7

21.4

16.2

61.8

52.1

24.0

28.2

0.84

47.5

1.77

1.20

2.80

57.1

1.330

99.9

CH

Fat clay, high plasticity, soft

1.6

4.3

18.0

16.5

59.6

60.1

35.0

25.1

0.84

56.2

1.68

1.07

2.77

61.3

1.586

98.1

MH

Elastic silt, high plasticity, soft

14.55 - 15.00

0.7

1.0

16.5

20.0

61.8

61.2

28.1

33.1

0.93

58.9

1.67

1.05

2.80

62.5

1.668

99.0

CH

Fat clay, high plasticity, soft

A16-S10

16.05 - 16.50

0.3

3.0

25.5

16.2

55.0

48.3

22.9

25.4

1.07

50.0

1.72

1.15

2.74

58.0

1.381

99.1

CL

Lean clay, intermediate plasticity, soft

113

A16-S11

17.55 - 18.00

29.7

13.2

18.7

16.5

21.2

0.1

0.5

14.4

2.22

1.94

2.70

28.2

0.392

99.3

SM

Silty sand with gravel, dense state

L1

37

114

A16-S12

19.05 - 19.50

15.4

22.4

21.9

11.6

27.5

0.2

1.0

12.3

2.22

1.98

2.70

26.7

0.364

91.3

SM

Silty sand with gravel, medium dense state

L1

25

115

A16-S13

20.55 - 21.00

22.5

15.0

20.5

14.6

26.4

0.2

0.9

9.2

2.27

2.08

2.75

24.4

0.323

78.2

SM

Silty sand with gravel, very dense state

L1

64

116

B1-S4

5.55 - 6.00

3.4

14.2

27.8

10.2

33.4

1.5

9.5

13.0

2.26

2.00

2.71

26.2

0.355

99.6

SM

Silty sand with gravel, medium dense state

13

117

B1-S5

7.05 - 7.50

11.8

2.29

2.05

2.71

24.3

0.321

99.9

11

118

B1-S6

8.55 - 9.00

119

B1-S7

10.05 - 10.50

120

B1-S8

11.55 - 12.00

121

B1-S13

19.05 - 19.50

122

B2-S1

1.05 - 1.50

123

B2-S4

5.55 - 6.00

124

B2-S6

8.55 - 9.00

125

B2-T1

126

2.1

1.4

19.9

50.1

24.9

25.2

1.53

M t
Description

23.1

10.9

7.7

10.1

27.3

0.1

0.9

9.7

2.30

2.10

2.64

20.5

0.258

99.7

GM

Silty gravel with sand, very dense state

L1

106

25.8

12.0

11.3

26.9

22.4

0.0

1.6

10.5

2.28

2.06

2.64

21.9

0.280

99.2

SM

Silty sand with gravel, very dense state

L1

104

28.4

22.2

11.5

6.8

8.5

22.0

0.0

0.5

10.6

2.27

2.05

2.63

21.9

0.281

99.3

GM

Silty gravel with sand, medium dense state

L1

28

18.9

11.6

17.4

15.6

3.9

31.7

0.1

0.8

10.5

SM

Silty sand with gravel, dense state

L1

43

2.4

86.6

10.3

0.8

0.0

23.6

SM

Silty sand with gravel, medium dense state

20

16.8

13.1

25.2

0.1

0.8

14.1

SM

Silty sand with gravel, very dense state

75

0.3

13.5

58.8

4.8

22.6

29.9

16.8

13.1

1.11

31.4

1.91

1.45

2.68

45.8

0.846

99.3

CL

Lean clay, low plasticity, medium stiff

10.00 - 10.90

3.5

56.7

14.5

25.3

60.3

27.3

33.0

0.58

46.5

1.75

1.20

2.72

56.0

1.271

99.7

CH

Fat clay, high plasticity, medium stiff

B2-S7

11.55 - 12.00

3.8

53.7

13.5

29.0

47.2

20.6

26.6

0.65

37.9

1.81

1.31

2.67

51.0

1.041

97.4

CL

Lean clay, intermediate plasticity, medium stiff

127

B2-S8

13.05 - 13.50

5.3

52.6

9.6

32.5

45.4

19.4

26.0

0.69

37.3

1.83

1.33

2.67

50.1

1.006

98.9

CL

Lean clay, intermediate plasticity, medium stiff

128

B2-S9

14.55 - 15.00

3.6

65.3

9.9

21.2

43.3

20.4

22.9

0.70

36.5

1.84

1.34

2.66

49.6

0.985

98.7

CL

Lean clay, intermediate plasticity, medium stiff

34.1

9.9

2.64

1.99

1.61

2.65

39.3

0.647

96.9

2.67

Ph lc - Appendix 5-5/26

129

B2-T2

16.00 - 16.80

130

B2-S10

16.80 - 17.12

131

B3-S2

2.55 - 3.00

132

B3-S3

4.05 - 4.50

133

B3-S4

5.55 - 6.00

134

B3-S5

7.05 - 7.50

135

B3-T1

8.0-8.9

136

B3-S6

10.05 - 10.50

137

B3-S8

13.05 - 13.50

138

B4-S1

1.05 - 1.50

139

B4-S2

2.55 - 3.00

140

B4-S3

4.05 - 4.50

141

B4-S4

142

9.2

50.0

6.8

33.2

12.6

19.2

54.5

1.9

11.7

81.6

6.3

4.5

4.2

5.6

2.7

6.5

7.6

SPT

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

H s rng
- Void ratio

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

2.64

35.6

0.552

99.3

CL

Lean clay, low plasticity, medium stiff

8.4

17.1

2.11

1.80

2.63

31.6

0.461

97.3

CL

Lean clay, hard

>50

0.1

0.3

21.1

2.01

1.66

2.71

38.7

0.630

90.8 SP-SM

Poorly-graded sand with silt, loose state

42.6

10.2

33.0

39.8

20.0

19.9

0.88

37.4

1.86

1.35

2.75

50.9

1.037

99.3

CL

Lean clay, intermediate plasticity, soft

1.5

8.0

43.8

7.3

30.8

37.5

19.6

17.9

0.91

36.0

1.85

1.36

2.79

51.2

1.049

95.6

CL

Lean clay with sand, intermediate plasticity, soft

1.5

5.5

7.4

35.0

11.1

33.4

25.3

1.93

1.54

CL

Lean clay with sand, soft

16.2

8.0

4.6

31.7

8.6

27.8

38.4

20.2

18.2

0.97

37.8

1.84

1.34

2.74

51.1

1.046

99.0

CL

Sandy lean clay, intermediate plasticity, soft

1.1

1.0

2.5

43.2

10.2

42.0

36.0

16.6

19.4

0.33

22.9

1.90

1.55

2.74

43.5

0.770

81.7

CL

Lean clay, intermediate plasticity, medium stiff

10.5

11.4

13.7

53.3

2.7

5.5

16.9

2.11

1.81

ML

Sandy silt, medium stiff

0.8

15.5

52.7

25.0

1.4

4.7

16.6

2.16

1.85

2.67

30.7

0.444

99.8

SM

Silty sand, low plasticity, loose state

0.7

4.0

15.2

58.0

18.9

1.3

2.1

17.6

2.12

1.80

2.67

32.5

0.482

97.2

SM

Silty Sand, medium dense state

12

30.0

16.0

8.0

12.4

19.0

0.0

0.6

9.3

2.29

2.10

2.65

20.9

0.264

93.5

GM

Silty gravel with sand, dense state

34

5.55 - 6.00

10.0

11.1

11.1

6.4

39.2

4.5

17.7

19.6

2.07

1.73

2.67

35.1

0.542

96.6

CL

Lean clayl with sand, stiff

10

B4-S5

7.05 - 7.50

23.4

16.1

10.6

6.1

30.6

2.5

10.8

35.6

18.1

17.4

-0.35

12.1

2.19

1.96

2.65

26.1

0.353

90.6

SC

Clayey sand with gravel, intermediate plasticity, medium d

TKC

17

143

B4-S6

8.55 - 9.00

12.3

10.3

51.7

9.1

16.8

34.1

20.3

13.8

0.68

29.7

1.94

1.49

2.68

44.5

0.802

99.3

CL

Lean clay with sand, low plasticity, very stiff

15

144

B4-S7

10.05 - 10.50

36.0

1.85

1.36

2.68

49.3

0.972

99.3

GM

Silty Gravel, medium dense state

17

145

B4-S9

13.05 - 13.50

18.4

1.99

1.68

2.65

36.7

0.580

84.3

SC

Clayey sand, low plasticity, medium dense state

23

146

B5-S1

1.05 - 1.50

SP-SM

Poorly-graded sand with silt, medium dense state

14

147

B5-S3

4.05 - 4.50

148

B5-S4

7.05 - 7.50

149

B5-S5

8.55 - 9.00

150

B5-T1

9.6 - 10.1

151

B5-S6

3.0

14.1

10.4

2.7

2.27

4.9

4.2

2.1

3.3

20.0

2.8

3.4

3.6

5.1

20.4

22.6

35.7

3.3

9.2

6.3

86.5

6.8

0.4

0.0

0.8

17.1

19.4

62.7

47.0

23.2

23.8

0.78

41.8

1.81

1.27

2.75

53.7

1.162

98.7

CL

Lean clay, intermediate plasticity, soft

1.5

0.9

15.4

60.2

4.7

18.8

26.8

16.1

10.7

0.89

25.7

2.02

1.60

2.72

41.1

0.698

99.8

CL

Lean clay with sand, low plasticity, stiff

13

1.9

22.4

46.2

5.1

24.4

22.4

12.3

10.1

0.61

18.4

2.11

1.78

2.74

35.1

0.542

93.3

CL

Lean clay with sand, low plasticity, stiff

11

12.0

19.4

46.7

2.4

17.2

21.4

11.7

9.6

0.84

19.9

2.03

1.69

2.75

38.5

0.627

87.2

CL

Sandy lean clay, low plasticity, hard

40/50

10.10 - 10.55

1.3

12.2

47.3

7.5

31.7

27.3

15.7

11.6

0.49

21.4

2.09

1.72

2.74

37.3

0.595

98.7

CL

Lean clay, low plasticity, very stiff

17

B5-S7

11.55 - 12.0

0.7

6.8

50.2

6.7

35.6

34.5

17.1

17.4

0.35

23.1

2.02

1.64

2.69

39.1

0.642

97.1

CL

Lean clay, low plasticity, medium stiff

153

B5-S8

13.00 - 13.50

0.2

8.2

64.4

8.3

18.9

27.5

13.4

14.1

0.91

26.3

2.00

1.58

2.72

41.9

0.720

99.2

CL

Lean clay, low plasticity, medium stiff

154

B5-S9

14.55 - 15.00

1.3

53.6

34.3

3.0

7.8

25.1

1.90

1.52

2.71

43.8

0.780

87.0 SC-SM

Silty, clayey sand, loose state

TKC

155

B5-S10

16.05 - 16.47

76.7

4.7

18.6

21.1

12.9

8.2

0.76

19.2

2.08

1.75

2.75

36.5

0.574

92.0

CL

Lean clay, low plasticity, hard

36

156

B7-S2

2.55 - 3.00

22.7

29.8

7.3

38.5

38.9

18.9

19.9

0.74

33.7

1.91

1.42

2.74

48.2

0.931

99.3

CL

Lean clay with sand, intermediate plasticity, soft

2b

2.5

157

B7-T1

3.70 - 4.60

31.2

41.1

3.7

24.1

28.4

14.8

13.6

0.82

25.9

1.99

1.58

2.67

40.9

0.692

100.0

CL

Sandy lean clay, low plasticity, soft

2b

158

B7-S3

5.00 - 5.45

0.2

72.2

23.7

0.5

3.5

18.3

2.12

1.79

2.68

33.2

0.496

98.7

SM

Silty Sand, loose state

159

B7-S4

7.05 - 7.50

4.7

46.7

36.3

1.6

10.7

16.8

2.12

1.82

2.67

31.8

0.466

96.4

SM

Silty Sand, loose state

160

B7-S5

8.55 - 9.00

16.2

2.16

1.85

2.65

30.2

0.432

99.6

161

B7-T2

10.10 - 10.90

162

B7- S7

163

BB3-S1

152

59.4

13.2

0.46

m Moisture Cont.,%

st - Liquidity

1.70

3.1

12.7

M t
Description

2.06

0.8

15.0

Tnh cht vt l - Physical Properties

20.8

3.4

27.6

Ch s do
- Plasticity Index

Gii hn chy
- Liquid Limits, %

<0.002

0.8

Gii hn do
- Plastic Limits, %

Gii hn Atterberg
St-Clay

0.005-0.002

0.075-0.005

Bi-Silt
0.425-0.075

2.0-0.4250

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

2.3

1.7

3.2

6.2

29.0

18.7

10.3

-0.03

22.9

2.70

14.7

18.8

44.9

1.7

10.4

19.2

11.4

7.8

0.36

14.2

2.20

1.93

2.67

27.8

0.386

98.5

12.50 - 12.90

2.4

28.5

56.3

3.7

9.2

30.1

16.6

13.5

0.28

20.4

2.08

1.73

2.69

35.8

0.557

98.7

1.05-1.5

5.1

85.3

9.2

0.0

0.4

24.1

2.68

CL

SP-SM

Sandy lean clay, low plasticity, stiff

Poorly-graded sand with silt, medium dense state

4
5

538

18

Ph lc - Appendix 5-6/26

SPT

32.0

0.470

99.4

ML

Silt, stiff

2b

17.0

23.4

0.2

1.3

8.5

2.33

2.15

2.66

19.2

0.237

95.9

SM

Silty sand with gravel, medium dense state

18

1.5

84.0

2.5

12.0

20.8

2.07

1.71

2.66

35.7

0.555

99.7

ML

Silt, hard

75

36.8

30.9

18.2

0.2

0.9

19.6

2.09

1.74

2.66

34.6

0.528

98.7

SM

Silty Sand, medium dense state

16

3.0

10.9

67.5

9.8

8.9

18.6

3.6

22.6

2.05

1.67

2.79

40.2

0.673

94.0 CL-ML

Silty clay, very soft

2b

0.67

12.0

12.0

62.3

5.1

8.6

13.7

4.5

18.0

2.16

1.83

2.78

34.3

0.522

96.3 CL-ML

Silty clay with sand, very soft

2b

1.6

9.0

57.9

26.3

1.3

4.0

17.2

2.13

1.82

2.68

32.0

0.471

97.8

SM

Silty Sand, very loose state

18

13.2

4.2

12.6

14.7

0.0

0.2

9.1

2.29

2.10

2.66

20.9

0.265

90.9

GM

Silty gravel with sand, medium dense state

50

7.50-8.50

11.7

10.9

63.0

6.4

8.0

21.6

2.08

1.71

2.74

37.7

0.604

97.9

ML

Silt with sand

BB4-S6

8.55-9.00

8.5

75.4

15.4

0.0

0.6

25.5

1.85

1.47

2.68

45.2

0.826

83.0

SM

Silty Sand

BB4-T2

9.00-10.00

4.6

8.1

67.9

9.1

10.4

23.3

2.05

1.66

2.76

39.8

0.660

97.1

ML

Silt, hard

175

BB4-S7

10.05-10.50

23.2

24.0

44.0

1.7

7.1

19.4

2.13

1.79

2.79

35.8

0.558

96.7

CL

Sandy lean clay, low plasticity, hard

176

BB4-T3

10.50-11.50

9.0

13.3

64.4

6.5

6.7

23.4

2.08

1.68

2.78

39.6

0.657

98.9

ML

Silt with sand, hard

177

BB4-S10

14.55-15.00

4.9

18.3

59.0

7.1

10.7

20.5

2.11

1.75

2.77

36.7

0.581

97.6

CL

Lean clay with sand, hard

92

178

BB4-S11

16.05-16.50

2.9

9.8

70.8

5.0

11.5

26.5

16.2

10.3

0.70

23.4

2.03

1.64

2.80

41.5

0.708

92.7

CL

Lean clay, low plasticity, hard

62

179

BB4-T7

16.50-17.50

15.4

21.7

51.2

4.7

7.0

30.5

17.4

13.1

-0.11

16.0

2.08

1.79

2.78

35.7

0.555

80.1

CL

Sandy lean clay, low plasticity, hard

180

BB4-S12

17.55-18.00

7.6

18.1

59.3

6.1

9.0

24.5

2.07

1.66

2.81

40.9

0.692

99.3

ML

Silt with sand, hard

63

181

BB4-S13

19.05-19.50

1.5

8.9

71.0

8.9

9.7

22.1

ML

Silt, hard

63

182

BB4-S14

20.55-21.00

5.9

17.7

67.1

3.9

5.4

19.9

2.12

1.77

2.81

37.1

0.590

95.0

ML

Silt with sand, hard

75

183

BB4-S17

25.05-26.50

9.3

15.8

55.3

10.7

9.0

20.0

2.06

1.72

2.78

38.1

0.615

90.5

CL

Lean clay with sand, hard

119.25

184

BB4-S20

29.55-29.95

7.6

19.1

60.1

5.2

8.1

18.4

2.10

1.78

2.81

36.6

0.578

89.3

CL

Lean clay with sand, hard

130

185

BB4-T16

30.0-31.0

6.7

9.7

63.3

9.4

10.9

19.9

2.13

1.78

2.78

36.0

0.563

98.5

CL

Lean clay with sand, hard

186

BB4-S21

31.05-31.44

4.5

19.3

61.7

7.2

7.3

20.7

2.13

1.77

2.80

36.7

0.579

99.7

CL

Lean clay with sand, hard

187

BB4-T17

31.50-32.50

14.3

14.4

56.6

4.4

10.3

18.5

2.12

1.79

2.75

35.0

0.539

94.3

CL

Lean clay with sand, hard

188

BB4-S22

32.55-33.00

12.2

15.8

54.8

8.2

9.0

25.3

CL

Lean clay with sand, hard

79

BB4-S23

34.05-34.50

0.7

3.7

55.7

16.3

23.6

30.1

2.04

1.56

2.97

47.5

0.903

99.0

CL

Lean clay, hard

76

190

BB4-S24

35.55-35.89

6.0

8.3

71.4

3.7

10.7

18.5

2.13

1.80

2.76

34.9

0.536

95.5

CL

Lean clay, hard

232

191

BB4-S26

38.55-38.91

5.4

9.7

49.7

2.1

6.2

23.2

ML

Sandy silt, hard

188.5

192

BB4-S28

41.55-41.63

11.7

16.7

59.9

4.0

7.8

23.8

ML

Silt with sand, hard

193

BB4-S30

44.55-44.9

25.6

13.9

51.6

2.5

6.4

17.7

ML

Silt with sand, hard

202

194

BB6-S3

4.05 - 4.50

0.9

47.0

34.3

2.2

15.6

38.2

19.2

19.0

0.26

24.2

2.02

1.63

2.72

40.2

0.671

98.1

CL

Sandy lean clay, intermediate plasticity, medium stiff

3.5

195

BB6-S4

5.55 - 6.00

0.4

61.8

28.3

1.5

8.1

24.3

14.5

9.8

0.70

21.4

2.08

1.71

2.73

37.4

0.597

97.8

SC

Clayey sand, low plasticity, medium dense state

13

196

BB6-S5

7.05 - 7.50

72.2

24.4

0.2

3.2

21.6

2.06

1.69

2.69

37.1

0.591

98.4

SM

Silty Sand, medium dense state

14

197

BB6-T1

7.8 - 8.6

2.1

14.2

53.0

5.4

25.4

22.4

2.07

1.69

2.72

37.9

0.610

99.8

CL

Lean clay with sand, low plasticity, stiff

2b

198

BB6-S6

8.60 - 9.05

GM

Silty gravel with sand, dense state

41

199

BB6-S7

10.05 - 10.50

ML

Sandy silt with gravel, hard

41

200

BB6-S9

13.05 - 13.50

ML

Silt with sand, very stiff

23

201

BB6-S10

14.55 - 15.00

GM

Silty gravel with sand, medium dense state

L1

18

165

BB3-S3

4.05-4.5

166

BB3-S4

5.55-6.0

167

BB4-S1

1.05-1.50

168

BB4-S2

2.55-3.00

169

BB4-S3

4.05-4.50

170

BB4-S4

5.55-6.00

171

BB4-S5

7.05-7.50

172

BB4-T1

173
174

189

5.8

29.3

2.1

14.0

41.2

13.8

6.4

14.5

10.8

13.2

8.5

28.0

26.3

17.9

13.0

10.1

13.3

0.28

0.14

0.70

32.7

19.3

7.5

10.2

23.2

0.1

0.7

8.1

21.9

21.9

2.1

2.1

49.3

0.7

2.0

16.8

7.2

11.9

71.2

2.5

7.2

13.6

5.9

9.0

24.2

0.3

0.9

16.0

41.3

18.4

H s rng
- Void ratio

2.65

<0.002

1.80

0.005-0.002

2.12

0.075-0.005

17.7

0.425-0.075

9.2

2.0-0.4250

6.7

2.55-3.0

4.75-2.0

81.1

BB3-S2

19.0-4.75

3.0

164

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

2.80

2.81

2.74
2.06

1.66

2.80

40.7

0.686

97.2

2.75

2.70
2.13

1.82

2.69

32.4

0.480

94.5

2.67
2.11

1.82

2.75

33.9

0.512

86.1

M t
Description

56

67

138.667

Ph lc - Appendix 5-7/26

SPT
38

72.9

SM

Silty sand with gravel, loose state

L1

2.69

GM

Silty gravel with sand, medium dense state

L1

12

2.69

GM

Silty gravel with sand, very dense state

L1

126.5

94.3

SM

Silty Sand, dense state

48

0.397

93.5

SM

Silty Sand, medium dense state

16

29.6

0.420

85.7

SM

Silty Sand, medium dense state

20

2.69

36.4

0.572

97.8 SP-SM

Poorly-graded sand with silt, medium dense state

22

1.79

2.73

34.5

0.527

56.6

CL

Sandy lean clay, low plasticity, stiff

14

1.90

1.43

2.73

47.7

0.912

99.8

CL

Lean clay, low plasticity, stiff

46.0

1.77

1.21

2.84

57.4

1.348

97.0

CH

Fat clay, high plasticity, medium stiff

0.75

36.6

1.83

1.34

2.75

51.2

1.051

95.6

CL

Lean clay, intermediate plasticity, medium stiff

20.6

0.61

33.9

1.92

1.43

2.79

48.7

0.950

99.4

CL

Lean clay, intermediate plasticity, stiff

10

20.4

0.84

37.6

1.87

1.36

2.79

51.3

1.055

99.5

CL

Lean clay, intermediate plasticity, stiff

11

7.1

22.2

2.05

1.68

2.80

40.0

0.668

93.1

ML

Silt with sand, hard

77

0.2

2.2

9.6

SM

Silty Sand, medium dense state

10

15.9

0.2

3.1

14.2

2.15

1.88

2.66

29.4

0.417

90.7 SC-SM

Silty, clayey sand, medium dense state

11

24.7

15.5

0.0

0.8

10.7

2.30

2.01

2.66

24.3

0.321

88.6

Silty Sand, very dense state

68

57.9

30.9

10.2

0.1

1.0

11.9

2.15

1.92

2.67

28.2

0.393

81.2 SW-SM

Well-graded sand with silt, very dense state

63

41.6

21.6

18.4

0.0

0.7

9.9

2.19

1.99

2.65

24.8

0.330

79.1

SM

Silty Sand, very dense state

101

10.05 - 10.50

0.3

31.8

36.5

4.9

26.6

28.8

14.9

13.9

0.54

22.3

2.04

1.67

2.73

38.7

0.632

96.3

CL

Sandy lean clay, low plasticity, stiff

11

BB9-T1

11.2 0- 12.10

0.6

2.0

29.9

13.5

54.0

41.5

21.6

19.9

0.93

40.0

1.83

1.30

2.75

52.7

1.113

98.8

CL

Lean clay, intermediate plasticity, medium stiff

BB9-S8

13.05 - 13.50

0.2

5.0

47.5

8.4

38.9

35.7

22.4

13.3

0.63

30.8

1.87

1.43

2.73

47.6

0.907

92.6

CL

Lean clay, intermediate plasticity, medium stiff

6.5

BB9-S9

14.55 - 15.00

0.4

8.9

68.0

4.8

17.9

29.6

17.4

12.2

0.87

28.1

1.96

1.53

2.72

43.8

0.778

98.1

CL

Lean clay, low plasticity, medium stiff

5.5

227

BB9-S10

16.05 - 16.50

10.0

3.1

16.8

61.9

2.0

6.2

16.1

2.14

1.84

2.72

32.3

0.477

91.6

ML

Lean clay, hard

93

228

B10-S4

5.55 - 6.00

12.8

16.8

9.0

6.9

37.0

0.5

4.3

11.4

2.24

2.01

2.62

23.3

0.303

98.8

SM

Silty sand with gravel, dense state

36

229

B10-S5

7.05 - 7.50

11.1

7.3

6.3

7.4

57.4

3.2

7.3

22.9

2.05

1.67

2.71

38.3

0.620

99.8

ML

Sandy silt, hard

31

230

B10-S7

10.05 - 10.50

1.3

8.2

15.3

57.2

4.5

13.6

31.5

1.88

1.43

2.63

45.6

0.838

98.7 CL-ML

Silty clay with sand, hard

45

231

B10-S8

11.55 - 12.00

17.7

3.5

8.0

40.4

1.2

4.8

16.4

2.13

1.83

2.62

30.1

0.431

99.6

Silty sand with gravel, dense state

L1

41

232

B10-S9

13.05 - 13.50

0.1

7.9

16.7

50.8

7.5

17.2

29.6

1.87

1.44

2.60

44.5

0.802

95.9 CL-ML

Silty clay with sand, hard

56

233

B11-S1

1.05 - 1.50

1.4

15.5

28.9

11.5

42.7

35.7

18.6

17.1

0.64

29.5

1.95

1.50

2.70

44.4

0.799

99.7

CL

Lean clay with sand, intermediate plasticity, stiff

2b

234

B11-S2

2.55 - 3.00

0.2

1.5

32.3

14.3

51.6

40.1

20.2

19.9

0.66

33.2

1.88

1.41

2.68

47.4

0.902

98.7

CL

Lean clay, intermediate plasticity, medium stiff

2b

235

B11-S3

4.05 - 4.50

2.6

4.3

35.5

10.9

46.8

38.6

19.5

19.1

0.54

29.8

1.92

1.48

2.74

45.9

0.849

95.9

CL

Lean clay, intermediate plasticity, medium stiff

2b

236

B11-S4

5.55 - 6.00

9.0

7.8

26.3

0.3

1.5

9.6

2.31

2.11

2.66

20.6

0.260

97.8

GM

Silty gravel with sand, very dense state

60

237

B11-S5

7.05 - 7.50

2.1

69.5

10.7

17.7

33.8

1.83

1.37

2.71

49.4

0.978

93.6

ML

Silt, intermediate plasticity, very stiff

23

204

BB6-S13

19.05 - 19.50

205

BB6-S14

20.55 - 21.00

206

BB6-S15

22.05 - 22.50

207

BB8-S2

208

H s rng
- Void ratio

L1

<0.002

Silty sand with gravel, dense state

17.55 - 18.00

0.005-0.002

SM

BB6-S12

0.075-0.005

92.5

203

0.425-0.075

25

2.0-0.4250

L1

16.05 - 16.50

4.75-2.0

Silty gravel with sand, medium dense state

BB6-S11

19.0-4.75

GM

202

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

40.4

22.5

5.4

7.5

23.1

0.0

1.2

9.5

13.6

17.3

21.1

5.2

8.1

32.9

0.3

1.5

16.9

2.12

1.81

2.70

33.1

0.494

11.0

23.6

21.2

6.6

8.5

27.4

0.5

1.4

16.8

1.96

1.67

2.71

38.5

0.625

33.7

18.2

5.1

8.4

33.1

0.3

1.2

9.7

40.5

12.9

1.7

4.6

16.9

0.0

0.6

12.0

2.55 - 3.00

1.1

27.0

58.4

12.3

0.0

1.2

13.2

2.21

1.95

2.68

27.3

0.375

BB8-S3

4.05 - 4.50

0.3

25.5

57.0

15.4

0.1

1.7

13.8

2.19

1.92

2.68

28.4

209

BB8-S4

5.55 - 6.00

24.5

59.5

14.4

0.1

1.5

13.4

2.14

1.89

2.68

210

BB8-S5

7.05 - 7.50

10.6

79.6

9.0

0.0

0.8

20.8

2.07

1.71

211

BB8-S6

8.55 - 9.00

1.3

29.0

37.9

4.7

21.9

29.1

14.7

14.4

-0.26

10.9

1.99

212

BB8-T1

9.80-10.7

7.9

41.3

10.0

40.8

31.5

14.6

16.9

1.11

33.3

213

BB8-S7

11.55 - 12.00

1.5

27.5

12.4

58.6

57.1

26.8

30.2

0.64

214

BB8-S8

13.05 - 13.50

3.0

48.9

8.4

39.7

43.3

16.4

26.9

215

BB8-S9

14.55 - 15.00

1.4

52.6

11.7

34.3

41.8

21.3

216

BB8-S10

16.05 - 16.50

3.0

0.1

3.2

48.9

8.8

36.0

40.8

20.4

217

BB8-S11

16.80 - 17.25

4.0

8.2

11.1

68.7

0.9

218

BB9-S2

2.55 - 3.00

2.9

33.8

40.2

17.3

219

BB9-S3

4.05 - 4.50

36.7

44.1

220

BB9-S4

5.55 - 6.00

49.9

221

BB9-S5

7.05 - 7.50

222

BB9-S6

8.55 - 9.00

223

BB9-S7

224
225
226

22.8

5.3

0.1

3.5

0.6

4.9

12.7

24.4

10.2

28.5

8.5

12.8

16.5

46.1

28.8

17.2

0.29

2.72

2.67

SM

SM

M t
Description

Ph lc - Appendix 5-8/26

SPT

0.46

33.2

1.88

1.41

2.70

47.8

0.914

98.2

CL

Lean clay with sand, intermediate plasticity, very stiff

25

5.3

9.2

49.6

5.7

8.0

36.5

24.3

12.3

-0.62

16.6

2.08

1.78

2.72

34.4

0.525

86.0

CL

Sandy lean clay, intermediate plasticity, hard

62

7.0

11.9

56.4

7.6

17.2

36.8

24.1

12.7

-0.57

16.9

1.95

1.67

2.66

37.1

0.590

76.0

CL

Lean clay with sand, intermediate plasticity, hard

45

7.5

17.8

10.9

34.4

1.9

3.7

23.9

1.97

1.59

2.66

40.3

0.675

94.3

SM

Silty sand with gravel, dense state

L1

39

14.7

2.8

9.1

48.2

4.5

8.7

36.0

23.8

12.2

-0.39

19.1

2.02

1.70

2.70

37.1

0.591

87.5

CL

Sandy lean clay, intermediate plasticity, hard

L1

43

2.1

9.9

13.8

51.3

6.0

16.8

47.6

26.1

21.6

0.20

30.5

1.92

1.47

2.74

46.3

0.861

96.8

CL

Lean clay with sand, intermediate plasticity, very stiff

L1

27

3.5

4.6

15.3

56.1

4.1

6.0

33.1

23.9

9.2

-0.84

16.3

2.15

1.85

2.74

32.5

0.482

92.5

ML

Sandy silt, low plasticity, hard

L1

64

2.55 - 3.00

0.8

1.7

19.4

14.8

63.3

39.0

21.5

17.4

0.86

36.5

1.83

1.34

2.64

49.2

0.969

99.4

CL

Lean clay, intermediate plasticity, medium stiff

2b

B12-S3

4.05 - 4.50

1.1

2.0

21.2

14.3

61.4

42.5

24.6

17.8

0.71

37.4

1.83

1.33

2.67

50.2

1.009

99.0

CL

Lean clay, intermediate plasticity, medium stiff

2b

247

B12-T1

5.00 - 5.80

38.2

19.8

18.4

0.13

22.3

2.02

1.65

2.70

38.9

0.638

94.4

248

B12-S4

7.05 - 7.50

43.7

24.9

18.9

0.64

37.0

1.83

1.34

2.66

49.6

0.983

100.0

249

B12-S5

8.55 - 9.00

37.6

1.83

1.33

2.67

50.1

1.005

250

B12-S7

11.55 - 12.00

251

B12-S8

13.05 - 13.50

252

B13-S2

253
254

239

B11-S7

10.05 - 10.50

240

B11-S8

11.55 - 12.00

241

B11-S9

13.05 - 13.50

23.7

242

B11-S10

14.55 - 15.00

12.1

243

B11-S11

16.05 - 16.50

244

B11-S12

17.55 - 18.00

245

B12-S2

246

14.2

10.5

15.7

8.0

H s rng
- Void ratio

17.2

<0.002

25.4

0.005-0.002

42.6

0.075-0.005

14.2

8.55 - 9.00

0.425-0.075

7.0

B11-S6

2.0-0.4250

61.4

238

4.75-2.0

15.1

19.0-4.75

2.3

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

13.6

3.7

3.7

36.4

2.6

24.3

0.7

5.7

4.4

32.5

14.2

42.5

2.1

0.6

16.1

42.6

33.7

1.1

3.9

2.65

41.2

16.3

8.2

5.4

26.2

0.3

2.5

2.65

2.55 - 3.0

10.1

10.8

31.3

12.8

35.0

46.6

21.7

24.9

1.15

50.3

1.71

1.14

2.70

57.8

1.367

B13-S6

10.05 - 10.50

17.2

12.2

54.5

7.4

8.8

28.8

19.1

9.7

0.31

22.1

2.05

1.68

2.68

37.4

B13-S7

11.55 - 12.0

12.7

13.4

49.3

6.0

10.6

28.6

18.8

9.8

-0.40

14.9

2.18

1.89

2.68

255

B13-S8

13.05 - 13.47

21.7

23.3

44.5

3.8

6.7

14.8

2.14

1.87

256

B14-S1

0.70 - 1.04

12.1

24.5

16.4

0.0

45.5

0.4

1.1

12.4

2.25

257

B14-S2

4.00 - 4.13

4.0

14.5

21.9

22.2

33.9

1.2

2.3

14.3

258

B15-S1

1.05 - 1.50

0.4

2.4

33.1

13.9

45.6

1.1

3.7

259

B16-S1

1.05 - 1.50

2.0

20.2

9.7

56.8

3.5

7.9

260

B16-S3

4.05 - 4.19

4.6

15.2

14.7

56.6

3.7

261

CC1-1-S2

2.55 - 3.00

2.9

6.2

64.0

24.7

262

CC1-1-S3

4.05 - 4.50

16.6

25.6

17.9

263

CC1-1-S4

5.55 - 6.00

264

CC1-1-S5

265

M t
Description

2b
Sandy lean clay with gravel, intermediate plasticity, mediu

2b

Silty clay, medium stiff

2b

SM

Silty Sand, very dense state

L1

63

GM

Silty gravel with sand, dense state

L1

41

99.3

CL

Lean clay with sand, intermediate plasticity, very soft

0.83333

0.597

99.4

CL

Lean clay with sand, low plasticity, hard

37

29.5

0.419

95.6

CL

Sandy lean clay, low plasticity, hard

49

2.69

30.6

0.440

90.7 CL-ML

Sandy silty clay, hard

110

2.00

2.68

25.5

0.342

97.1

SM

Silty Sand, very dense state

L1

>50

2.20

1.93

2.70

28.5

0.399

96.5

SM

Silty Sand, very dense state

L1

>50

28.5

1.96

1.52

2.71

43.9

0.781

98.8

ML

Sandy silt, very stiff

24

26.5

1.95

1.54

2.70

42.9

0.750

95.4

CL

Sandy lean clay, low plasticity, soft

2b

5.2

17.0

2.14

1.83

2.69

32.1

0.472

96.8

ML

Sandy silt, hard

L1

>50

0.3

1.9

19.9

2.08

1.74

2.71

35.8

0.557

96.5

SM

Silty Sand, medium dense state

19

22.2

0.0

0.5

16.0

SM

Silty sand with gravel, medium dense state

14

65.1

29.7

1.0

4.2

29.1

1.85

1.43

2.70

47.0

0.887

88.7

SM

Silty Sand, very loose state

7.05 - 7.50

81.6

16.9

0.3

1.2

31.3

1.86

1.41

2.69

47.6

0.907

92.8

SM

Silty Sand, loose state

CC1-1-S6

8.55 - 9.00

73.3

22.2

0.9

3.7

33.8

1.87

1.40

2.73

48.7

0.949

97.2 SC-SM

Silty, clayey sand, very loose state

0.5

266

CC1-1-S8

11.55 - 12.00

66.9

4.9

28.2

30.2

18.6

11.6

1.28

33.4

1.89

1.42

2.73

48.0

0.922

98.9

CL

Lean clay, low plasticity, very soft

0.67

267

CC1-1-S9

13.05 - 13.50

19.9

51.3

3.0

25.8

34.9

21.0

13.8

1.11

36.4

1.84

1.35

2.71

50.2

1.008

97.9

CL

Lean clay with sand, low plasticity, very soft

268

CC1-1-S10

14.55 - 15.00

19.7

16.4

35.0

0.6

6.9

11.9

2.26

2.02

2.69

25.0

0.333

96.6 SC-SM

Silty, clayey sand, medium dense state

13

269

C2-S1

1.05 - 1.50

22.5

68.3

8.9

0.1

0.2

18.4

2.00

1.69

2.67

36.6

0.578

85.0 SP-SM

Poorly-graded sand with silt, medium dense state

25

270

C2-S2

2.55 - 3.00

22.1

65.1

11.3

0.2

0.9

22.2

2.07

1.69

2.73

38.0

0.614

98.7

Silty Sand, medium dense state

26

2.7

17.3

2.7

5.4

18.7

0.4

24.9

16.4

8.5

1.19

CL

99.7 CL-ML

2.79

SM

Ph lc - Appendix 5-9/26

SPT

0.964

98.3

20

272

C2-S4

5.55 - 6.00

20.8

2.09

1.73

2.70

36.0

0.562

99.9

17

273

C2-S5

7.05 - 7.50

15.6

2.10

1.81

2.77

34.6

0.530

81.4

SM

Silty Sand, medium dense state

26

274

C2-S7

41.5

1.76

1.24

2.73

54.6

1.204

94.3

CL

Lean clay, intermediate plasticity, very soft

275

7.3

M t
Description

34.3

19.1

19.5

0.0

0.3

10.05 - 10.50

0.6

2.0

38.8

16.4

42.2

C2-S8

11.55 - 12.00

6.3

2.9

54.9

8.1

27.8

46.5

1.74

1.18

2.75

57.1

1.333

96.1 CL-ML

Silty clay, very soft

276

C2-S9

13.05 - 13.25

6.5

12.5

14.3

50.7

3.7

3.7

23.3

2.03

1.65

2.76

40.2

0.672

95.7

ML

Sandy silt, hard

600

277

CC3-S4

5.55 - 6.00

2.8

0.4

3.4

40.3

14.9

38.2

36.5

18.3

18.2

1.70

49.4

1.75

1.17

2.79

58.0

1.381

99.5

CL

Lean clay, intermediate plasticity, soft

1.5

278

CC3-S5

7.05 - 7.50

3.5

0.2

3.1

45.1

9.6

38.6

35.9

22.3

13.6

1.82

47.0

1.76

1.20

2.76

56.5

1.301

99.7

CL

Lean clay, intermediate plasticity, soft

279

CC3-S6

8.55 - 9.00

1.5

2.0

45.4

9.1

42.0

46.9

20.8

26.1

0.85

43.0

1.79

1.25

2.75

54.5

1.200

98.5

CL

Lean clay, intermediate plasticity, medium stiff

280

CC3-S7

10.10 - 10.55

0.2

1.0

46.5

9.6

42.7

49.8

22.2

27.6

0.83

45.2

1.75

1.21

2.73

55.7

1.259

98.1

CL

Lean clay, intermediate plasticity, hard

0/80

281

CC3-S8

11.55 - 12.00

31.6

20.7

19.5

0.1

0.4

SM

Silty sand with gravel, hard

50

282

CC3-S9

13.05 - 13.50

10.2

16.2

58.9

4.6

10.2

35.5

14.7

20.9

1.03

36.2

1.87

1.37

2.78

50.7

1.029

97.8

CL

Lean clay with sand, intermediate plasticity, hard

34

283

CC3-S10

14.55 - 15.00

14.7

16.6

56.5

4.6

7.6

32.0

19.6

12.3

0.44

25.1

1.98

1.58

2.66

40.5

0.681

97.9

CL

Sandy lean clay, low plasticity, hard

50

284

C4-S4

5.55 - 6.00

5.0

55.6

33.3

1.1

4.5

54.2

1.68

1.09

2.69

59.4

1.464

99.4

SM

Silty Sand, very loose state

285

C4-S5

7.05 - 7.50

19.0

42.0

32.4

1.0

5.6

25.3

1.98

1.58

2.66

40.6

0.684

98.3 SC-SM

Silty, clayey sand, medium dense state

12

286

C4-S6

8.55 - 9.00

18.4

2.10

1.77

2.66

33.4

0.501

97.7

287

C4-06(1)

8.55 - 9.00

11.6

2.26

2.02

2.65

23.7

0.311

99.1 CL-ML

Sandy silty clay, very stiff

29

288

C4-S7

10.05 - 10.50

13.5

2.14

1.88

2.65

28.9

0.407

87.9

SC

Clayey sand, low plasticity, medium dense state

23

289

C4-S8

11.55 - 12.00

SM

Silty sand with gravel, medium dense state

22

290

C4-S9

13.05 - 13.50

291

C4-S10

15.00 - 15.21

292

CC4-S4

293

8.6

15.5

19.6

H s rng
- Void ratio

49.1

<0.002

2.71

0.005-0.002

1.38

0.075-0.005

1.86

0.425-0.075

35.0

2.0-0.4250

4.05 - 4.50

4.75-2.0

C2-S3

19.0-4.75

271

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

12.2

0.5

44.2

22.2

21.9

0.88

10.1

2.70

8.1

21.6

19.6

37.5

4.6

8.7

12.3

29.6

24.5

8.9

24.4

0.0

0.3

35.0

20.3

10.4

13.2

20.9

0.1

0.3

6.0

1.96

1.85

2.66

30.4

0.437

36.3

27.8

13.8

46.0

2.1

10.3

19.9

2.07

1.73

2.65

34.7

0.531

99.2 CL-ML

Sandy silty clay, hard

L1

64

22.2

20.7

30.3

0.7

2.2

18.5

2.11

1.78

2.70

33.9

0.514

97.0

SM

Silty Sand, very dense state

L1

200

5.55 - 6.00

1.7

6.9

35.0

9.5

46.9

33.7

16.9

16.8

0.23

20.8

2.05

1.70

2.75

38.2

0.619

92.4

CL

Lean clay, low plasticity, stiff

2b

14

CC4-T1

6.7 - 7.5

1.4

5.0

42.2

9.5

41.9

34.2

17.4

16.8

0.28

22.1

2.06

1.69

2.79

39.4

0.649

94.7

CL

Lean clay, low plasticity, hard

2b

60/80

CC4-S5

8.55 - 9.00

6.6

24.1

14.8

9.1

25.2

19.1

0.2

1.0

9.9

2.31

2.10

2.68

21.6

0.275

96.7

SM

Silty sand with gravel, very dense state

94

295

CC4-S6

10.05 - 10.50

10.9

14.2

15.9

20.5

18.2

19.9

0.1

0.3

10.0

2.29

2.09

2.69

22.4

0.289

93.0

SM

Silty sand with gravel, very dense state

120

296

CC4-S7

11.55 - 12.00

35.3

21.1

9.1

8.3

25.0

0.1

1.1

12.3

SM

Silty sand with gravel, dense state

30

297

CC4-S8

13.05 - 13.50

78.7

5.8

15.5

35.9

19.9

16.0

0.75

31.9

1.88

1.43

2.71

47.2

0.893

96.8

CL

Lean clay, intermediate plasticity, very stiff

27

298

CC4-S9

14.55 - 15.00

29.1

17.8

11.2

0.75

26.3

1.96

1.55

2.66

41.8

0.718

97.4

CL

Sandy lean clay, low plasticity, hard

49

299

CC4-S10

15.9-16.19

Sandy silty clay, hard

14/100

300

C5-S3

TKC

13

301

294

1.9

22.1

28.2

18.0

10.3

-0.43

2.66

3.1

16.8

19.8

49.7

3.0

7.6

9.6

17.7

17.3

41.5

3.1

6.4

21.2

4.05 - 4.50

18.4

38.1

29.1

2.9

11.5

26.4

1.99

1.57

2.70

41.9

0.722

98.9 SC-SM

Silty, clayey sand, medium dense state

C5-S4

5.55 - 6.00

10.1

35.6

31.3

4.7

18.4

22.1

13.2

8.9

0.89

21.1

2.05

1.69

2.70

37.4

0.598

95.3

CL

Sandy lean clay, low plasticity, stiff

2b

302

C5-S5

7.05 - 7.50

1.5

5.7

26.4

11.9

54.5

45.3

23.4

21.9

0.47

33.7

1.89

1.41

2.73

48.3

0.936

98.4

CL

Lean clay, intermediate plasticity, medium stiff

303

C5-S6

8.55 - 9.00

0.2

2.1

46.3

17.1

34.4

43.8

1.76

1.23

2.73

54.9

1.219

98.1 CL-ML

Silty clay, soft

304

C5-S8

11.55 - 12.00

0.5

1.4

40.6

19.2

38.4

42.0

1.81

1.27

2.74

53.7

1.159

99.5 CL-ML

Silty clay, very soft

305

C5-S9

13.05 - 13.50

14.8

2.17

1.89

2.71

30.2

0.432

92.7

306

C5-S10

15.00 - 15.45

13.7

2.23

1.96

2.70

27.5

0.379

97.6

4.4

2.71

CL-ML

Ph lc - Appendix 5-10/26

SPT

34.1

1.8

2.5

8.8

2.67

GM

Silty gravel with sand, dense state

31

308

D1-S6

7.05 - 7.50

13.7

26.2

17.9

9.3

9.7

22.5

0.1

0.6

12.0

2.69

GM

Silty gravel with sand, dense state

32

309

D1-S7

8.55 - 9.00

22.4

19.7

10.3

12.5

32.0

1.2

1.9

20.2

2.04

1.70

2.70

37.1

0.589

92.5

SM

Silty sand with gravel, dense state

L1

50

310

D1-S8

9.60 - 10.00

0.8

14.6

29.5

24.0

28.4

1.0

1.7

11.2

2.29

2.06

2.74

24.8

0.329

92.9

SM

Silty Sand, very dense state

L1

301.6

311

D1-S9

24.50 - 24.86

11.6

18.2

22.2

17.1

28.7

0.7

1.4

10.6

2.33

2.11

2.76

23.5

0.308

94.7

SM

Silty Sand, very dense state

L1

145

312

D2-S2

2.55-3.0

4.4

3.8

55.6

16.5

19.7

37.6

22.7

14.9

0.44

29.2

1.99

1.54

2.83

45.7

0.840

98.6

CL

Lean clay, intermediate plasticity, very stiff

26

313

D2-S3

4.05-4.5

10.0

24.5

47.3

8.7

9.5

31.0

16.6

14.4

0.08

17.8

2.15

1.82

2.74

33.5

0.504

96.7

CL

Sandy lean clay, low plasticity, hard

193

314

D3-S1

1.05 - 1.50

1.4

30.8

61.5

0.7

5.7

26.0

1.92

1.52

2.76

44.9

0.816

87.8

ML

Sandy silt, stiff

2b

315

D3-S2

2.55 - 2.93

8.1

23.7

51.9

5.3

11.0

15.0

2.13

1.85

2.83

34.5

0.527

80.5

CL

Sandy lean clay, low plasticity, hard

95

316

D4-S1

1.05 - 1.50

13.3

24.2

44.8

16.9

0.0

0.8

SM

Silty Sand, medium dense state

12

317

D4-S2

2.55 - 3.0

1.4

2.2

11.3

44.4

3.2

13.8

318

D4-S4

5.55 - 6.0

3.7

9.1

67.6

10.2

9.5

319

D4-S5

7.05 - 7.50

10.7

10.1

58.9

10.5

9.9

37.5

26.2

11.3

320

D5-S2

2.55 - 3.0

9.8

16.3

54.1

10.9

8.9

28.3

18.6

321

D5-S3

4.05 - 4.50

32.0

7.5

6.7

7.8

35.9

4.7

5.4

30.9

322

D5-S4

5.55 - 6.00

42.1

8.9

5.2

9.1

29.6

2.5

2.6

35.6

323

L1-S2

2.55 - 3.00

0.9

94.3

4.2

0.5

324

L1-S3

4.05 - 4.50

1.2

94.7

3.5

325

L1-S4

5.55 - 6.00

1.6

87.7

326

L1-S5

7.05 - 7.50

0.6

327

L1-S6

8.55 - 9.00

328

L1-S7

10.05 - 10.50

329

L1-S8

11.55 - 12.00

330

L1-S9

13.05 - 13.50

331

L1-S10

14.55 - 15.00

332

L1-S11

16.05 - 16.50

333

L1-S12

334

27.2

19.5

7.7

-0.58

17.1

H s rng
- Void ratio

7.1

<0.002

2.6

0.005-0.002

13.6

0.075-0.005

20.2

0.425-0.075

18.2

2.0-0.4250

5.55 - 6.00

4.75-2.0

D1-S5

19.0-4.75

307

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

2.74

M t
Description

21.0

2.05

1.70

2.70

37.1

0.590

96.4 CL-ML

Gravelly silty clay, low plasticity, medium stiff

2b

27.6

1.84

1.44

2.71

46.8

0.878

85.0 CL-ML

Silty clay, very stiff

24

-0.55

19.9

2.13

1.77

2.84

37.7

0.606

93.3

ML

Silt with sand, intermediate plasticity, hard

132.143

9.8

-0.23

16.3

2.10

1.81

2.72

33.4

0.501

88.5

CL

Lean clay with sand, low plasticity, medium stiff

32

18.9

12.0

-0.01

18.8

2.13

1.79

2.78

35.5

0.550

94.9

GC

Clayey gravel with sand, low plasticity, dense state

5b

47

22.0

13.6

-0.50

15.3

2.74

GC

Clayey gravel with sand, intermediate plasticity, very dense

L1

119

0.2

2.61

SP

Poorly-graded sand, dense state

32

0.4

0.2

2.62

SP

Poorly-graded sand, dense state

34

5.2

0.5

0.2

2.64

SP-SM

Poorly-graded sand with silt, dense state

35

76.5

21.5

1.2

0.2

2.62

SM

Silty Sand, dense state

36

0.6

75.6

22.4

1.2

0.3

2.63

SM

Silty Sand, dense state

36

1.4

67.1

27.7

3.4

0.4

2.64

SM

Silty Sand, dense state

35

5.0

50.1

22.3

18.4

0.3

2.1

2.64

SM

Silty Sand, medium dense state

29

0.1

26.7

62.5

9.7

0.2

0.8

2.61

SP-SM

Poorly-graded sand with silt, dense state

30

30.2

13.9

30.4

5.0

20.5

25.8

13.5

12.3

2.69

CL

Sandy lean clay, low plasticity, hard

31

9.5

7.5

41.3

5.4

31.1

35.2

18.4

16.8

2.73

CL

Lean clay with sand, intermediate plasticity, hard

30

17.55 - 18.00

1.1

5.5

35.5

11.7

46.1

37.0

18.5

18.5

2.67

CL

Lean clay, intermediate plasticity, hard

31

L1-S13

19.05 - 19.50

1.2

6.9

21.0

17.2

53.7

46.1

23.5

22.6

2.67

CL

Lean clay, intermediate plasticity, hard

33

335

L1-S14

20.55 - 21.00

14.5

10.8

39.8

1.1

12.9

24.8

15.4

9.3

2.70

CL

Sandy lean clay, low plasticity, hard

32

336

L1-S15

22.05 - 22.50

2.9

20.8

55.5

5.7

15.1

21.2

16.8

4.4

2.64

CL-ML

Silty clay with sand, low plasticity, hard

31

337

L1-S16

23.55 - 24.00

9.4

59.4

7.4

23.8

52.5

31.7

20.8

2.67

MH

Elastic silt, high plasticity, hard

33

338

L1-S17

25.05 - 25.34

1.2

26.8

49.0

5.3

17.7

2.62

CL-ML

Silty clay with sand, hard

214.3

339

L2-S1

1.05 - 1.50

2.1

88.9

4.5

1.5

2.9

2.65

SP-SC

Poorly-graded sand with silty clay, dense state

31

23.8

4.2

1.8

1.7

3.6

0.6

3.6

17.3

0.2

18.5

12.9

5.6

1.45

Ph lc - Appendix 5-11/26

SPT

33

4.4

91.2

3.5

0.3

0.3

2.64

SP

Poorly-graded sand, dense state

35

0.6

69.8

28.2

0.4

1.0

2.61

SM

Silty Sand, dense state

35

0.8

3.2

86.4

8.2

0.4

1.0

2.65

SP-SM

Poorly-graded sand with silt, dense state

35

8.55 - 9.00

0.1

2.9

80.1

15.8

0.4

0.7

2.63

SM

Silty Sand, dense state

45

L2-S7

10.05 - 10.50

0.2

49.8

38.1

10.9

0.1

0.9

2.63

SW-SM

Well-graded sand with silt, very dense state

52

346

L2-S8

11.55 - 12.00

4.9

10.2

25.1

7.4

34.0

0.3

4.5

2.66

SM

Silty sand with gravel, dense state

39

347

L2-S9

13.05 - 13.50

1.7

9.0

49.3

9.1

30.2

0.1

0.6

2.64

SM

Silty Sand, dense state

37

348

L2-S10

14.55 - 15.00

0.3

3.4

62.2

7.4

26.2

0.1

0.5

2.67

SM

Silty Sand, dense state

36

349

L2-S11

16.05 - 16.50

0.8

3.8

61.9

23.0

10.2

0.0

0.3

2.64

SW-SM

Well-graded sand with silt, medium dense state

23

350

L2-S12

17.55 - 18.00

1.9

8.4

3.2

7.9

29.2

10.5

38.9

41.3

24.2

17.1

0.33

29.9

1.95

1.50

2.72

44.9

0.814

99.8

CL

Lean clay with sand, intermediate plasticity, medium stiff

351

L2-T1

18.00 - 19.00

5.6

39.7

9.8

44.9

34.3

17.6

16.7

0.51

26.1

1.87

1.48

2.66

44.4

0.800

87.0

CL

Lean clay, low plasticity, stiff

352

L2-S13

19.05 - 19.50

0.4

1.6

36.5

12.2

49.3

37.8

20.5

17.4

0.60

30.9

1.91

1.46

2.68

45.4

0.833

99.4

CL

Lean clay, intermediate plasticity, stiff

353

L2-S14

20.55 - 21.00

0.2

3.7

28.3

12.7

55.1

41.6

22.2

19.4

0.52

32.3

1.84

1.39

2.64

47.3

0.896

94.9

CL

Lean clay, intermediate plasticity, stiff

354

L2-S15

22.05 - 22.50

7.5

66.3

4.0

22.3

35.0

23.4

11.6

2.57

CL

Lean clay, low plasticity, stiff

355

L2-S16

23.55 - 24.00

35.2

20.0

15.2

2.63

356

L2-S17

25.05 - 25.50

0.1

10.4

62.5

4.7

22.4

29.1

18.9

10.2

0.42

23.2

2.01

1.63

2.64

38.3

0.620

98.7

CL

Lean clay, low plasticity, very stiff

21

357

L2-S18

26.55 - 27.00

0.4

6.0

67.2

3.4

23.1

35.2

20.8

14.4

0.44

27.2

1.89

1.48

2.63

43.8

0.780

91.9

CL

Lean clay, intermediate plasticity, very stiff

22

358

L2-S19

28.05 - 28.50

5.6

11.2

20.1

45.2

1.4

16.4

23.8

10.4

13.4

2.66

CL

Sandy lean clay, low plasticity, very stiff

23

359

L2-S20

29.55 - 30.00

7.4

8.4

19.7

42.4

1.6

20.6

2.64

CL-ML

Sandy silty clay, hard

214.3

360

L3-S2

2.55 - 3.00

49.7

46.4

3.7

0.0

0.2

14.0

2.03

1.78

2.68

33.7

0.508

74.1

SP

Poorly-graded sand, very dense state

92

361

L3-S3

4.05 - 4.50

25.5

70.5

2.9

0.0

0.2

18.2

2.04

1.73

2.70

36.0

0.563

87.7

SP

Poorly-graded sand, very dense state

56

362

L3-S4

5.55 - 6.00

28.6

62.2

8.3

0.0

0.9

15.9

2.18

1.88

2.69

30.2

0.432

98.8 SP-SM

Poorly-graded sand with silt, dense state

49

363

L3-S5

7.05 - 7.50

364

L3-S6

8.55 - 9.00

365

L3-S7

10.05 - 10.50

366

L3-S8

11.55 - 12.00

367

L3-S9

13.05 - 13.50

368

L3-S10

14.55 - 15.00

369

L3-S11

16.05 - 16.50

370

L3-S12

17.55 - 18.00

371

L4-S1

1.05-1.50

372

L4-S2

2.55-3.00

373

L4-S3

4.05-4.50

374

L4-S4

5.55-6.00

375

L4-S5

7.05-7.50

376

L4-S6

8.55-9.00

377

L4-S7

10.05-10.50

341

L2-S3

4.05 - 4.50

342

L2-S4

5.55 - 6.00

343

L2-S5

7.05 - 7.50

344

L2-S6

345

0.5

13.7

0.2

0.8

18.7

H s rng
- Void ratio

Poorly-graded sand, dense state

<0.002

SP

0.005-0.002

2.63

0.075-0.005

1.0

0.425-0.075

0.4

2.0-0.4250

1.6

2.55 - 3.00

4.75-2.0

90.3

L2-S2

19.0-4.75

6.7

340

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

M t
Description

19.6

9.3

9.8

39.1

21.8

0.0

0.5

16.3

2.13

1.83

2.69

31.9

0.469

93.5

SM

Silty sand with gravel, very dense state

56

21.9

11.5

10.0

15.8

21.3

0.2

0.6

9.2

2.28

2.09

2.67

21.8

0.279

88.3

GM

Silty gravel with sand, very dense state

136

1.3

8.6

58.0

5.8

26.4

25.0

14.8

10.2

0.65

21.5

2.06

1.70

2.70

36.9

0.586

98.7

CL

Lean clay, low plasticity, medium stiff

19.8

19.0

9.3

9.5

29.9

2.2

10.3

21.4

13.2

8.2

0.68

18.8

2.11

1.78

2.70

34.0

0.515

98.3

SC

Clayey sand with gravel, low plasticity, dense state

L1

34

23.3

22.3

1.5

1.1

7.4

33.3

4.8

6.2

28.9

15.8

13.0

0.39

20.8

2.10

1.74

2.73

36.4

0.572

99.6

GC

Clayey gravel, low plasticity, very dense state

L1

106

10.5

44.5

9.3

2.9

6.4

20.1

2.5

3.8

30.5

20.4

10.1

-0.49

15.4

2.22

1.93

2.82

31.5

0.460

94.5

GC

Clayey gravel with sand, low plasticity, very dense state

L1

81

1.6

10.6

57.3

21.5

9.0

38.1

24.4

13.6

0.47

30.8

1.95

1.49

2.85

47.8

0.914

96.1

CL

Lean clay, intermediate plasticity, hard

38

13.2

7.6

53.5

11.4

6.5

34.2

24.3

9.9

-0.38

20.5

2.15

1.78

2.86

37.7

0.606

96.7

ML

Silt with sand, low plasticity, hard

91

92.2

6.9

0.9

0.0

0.0

14.9

1.78

1.55

2.67

42.0

0.723

55.1

SP

Poorly-graded sand, very loose state

90.5

7.9

1.5

0.0

0.0

11.6

1.81

1.62

2.66

39.1

0.643

48.1

SP

Poorly-graded sand, medium dense state

27

23.0

13.6

3.2

22.8

0.1

0.1

18.6

2.04

1.72

2.67

35.5

0.551

90.0

SM

Silty sand with gravel, dense state

35

0.4

74.1

19.2

6.0

0.0

0.3

21.8

1.95

1.60

2.68

40.3

0.676

86.5 SW-SM

Well-graded sand with silt, very dense state

103

45.2

32.5

18.7

0.7

2.9

12.6

2.16

1.92

2.69

28.6

0.400

84.5

Silty Sand, medium dense state

15

7.7

0.0

21.4

6.0

16.0

SM

9.7

20.3

21.6

14.1

27.1

0.8

6.6

10.6

2.09

1.89

2.67

29.3

0.415

68.0 SC-SM

Silty, clayey sand, medium dense state

16

15.4

24.5

14.8

15.6

23.0

0.0

0.8

8.3

2.03

1.87

2.66

29.8

0.424

51.9

Silty sand with gravel, medium dense state

23

SM

Ph lc - Appendix 5-12/26

SPT

Silty Sand, dense state

37

0.43

32.9

1.86

1.40

2.77

49.5

0.980

93.1

CL

Lean clay with sand, intermediate plasticity, very stiff

16

0.45

30.3

1.92

1.47

2.68

45.2

0.825

98.5

CL

Lean clay with sand, intermediate plasticity, very stiff

14.0

2.18

1.91

2.66

28.1

0.391

95.1 SC-SM

Silty, clayey sand, loose state

5b

16.6

2.10

1.80

2.72

33.9

0.512

88.4

Clayey sand, low plasticity, loose state

5b

4.8

16.5

2.17

1.87

2.71

30.9

0.447

99.8 SC-SM

Silty, clayey sand, loose state

5b

0.3

0.7

8.7

2.32

2.14

2.67

19.7

0.246

94.2

SM

Silty Sand, very dense state

L1

101

4.6

0.2

0.0

15.8

1.96

1.70

2.68

36.7

0.579

73.2

SM

Silty Sand, medium dense state

22

35.1

3.8

0.0

0.1

16.7

2.03

1.74

2.69

35.3

0.545

82.4

SW

Well-graded sand, dense state

37

68.8

25.3

4.8

0.2

0.0

14.1

1.96

1.72

2.68

35.9

0.560

67.4 SW-SM

Well-graded sand with silt, very dense state

80

51.7

37.8

5.5

0.2

0.0

17.8

2.01

1.71

2.68

36.2

0.568

83.9 SW-SM

Well-graded sand with silt, very dense state

63

47.7

20.2

19.5

1.4

11.3

12.3

2.20

1.96

2.68

26.9

0.368

89.4 SC-SM

Silty, clayey sand, medium dense state

22

3.9

44.2

16.8

25.5

1.1

8.6

12.7

2.16

1.92

2.70

28.9

0.406

84.6 SC-SM

Silty, clayey sand, medium dense state

10

10.3

29.1

12.8

30.6

2.2

11.5

33.6

17.8

15.9

-0.46

10.4

2.14

1.93

2.72

29.0

0.408

69.4

SC

Clayey sand, low plasticity, medium dense state

5.7

20.4

16.2

36.6

3.9

17.3

26.9

13.4

13.5

0.46

19.6

2.11

1.76

2.75

36.0

0.563

95.9

CL

Sandy lean clay, low plasticity, hard

41

28.7

28.7

6.0

24.3

0.2

0.0

9.7

2.69

SM

Silty Sand, very dense state

L1

120

1.05 - 1.50

52.4

39.6

7.5

0.1

0.4

18.1

2.66

SM

Silty Sand, loose state

L6-S2

2.55 - 3.00

52.8

41.3

5.6

0.0

0.3

22.5

2.01

1.64

2.69

38.9

0.637

94.8

SM

Silty Sand, medium dense state

11

396

L6-S4

5.55 - 6.00

28.2

68.6

3.1

0.2

0.0

19.9

2.05

1.71

2.67

36.1

0.564

94.4

SP

Poorly-graded sand, medium dense state

29

397

L6-S7

10.05 - 10.50

48.2

48.0

3.6

0.2

0.0

21.4

2.04

1.68

2.65

36.5

0.576

98.3

SP

Poorly-graded sand, medium dense state

27

398

L6-S8

11.55 - 12.00

41.9

41.6

14.4

0.3

1.8

10.6

2.24

2.03

2.67

24.0

0.316

89.5

SM

Silty Sand, dense state

32

399

L7-S1

1.05 - 1.50

0.4

10.6

60.2

8.1

20.7

82.7

46.0

36.7

0.86

77.4

1.54

0.87

2.68

67.6

2.084

99.6

MH

Elastic silt, very high plasticity, soft

1(*)

1.5

400

L7-S2

2.55 - 3.00

0.7

7.8

31.8

30.9

24.1

1.0

3.7

20.4

12.4

8.0

1.12

21.4

1.92

1.59

2.67

40.4

0.678

84.1

SC

Clayey sand, low plasticity, very loose state

1.5

L7-S3

4.05 - 4.50

7.3

24.1

30.5

15.6

22.0

0.1

0.4

14.1

2.19

1.92

2.66

27.7

0.383

98.1

SM

Silty Sand, very loose state

1.5

402

L7-S4

5.55 - 6.00

6.2

24.6

30.5

17.1

21.1

0.0

0.6

11.9

2.16

1.93

2.67

27.7

0.383

82.7

SM

Silty Sand, loose state

403

L7-S6

8.55 - 9.00

2.2

1.6

57.7

30.7

7.4

0.0

0.3

19.4

2.10

1.76

2.70

34.8

0.534

98.0 SW-SM

Well-graded sand with silt, medium dense state

11

404

L7-S7

10.05 - 10.50

30.0

39.4

22.2

1.4

7.0

22.1

11.6

10.5

0.73

19.2

2.07

1.74

2.69

35.2

0.543

95.1

SC

Clayey sand, low plasticity, medium dense state

15

405

L7-T1

10.8-11.55

14.5

34.6

35.7

1.8

13.4

20.5

11.0

9.5

1.27

23.0

2.02

1.64

2.81

41.6

0.711

90.8

CL

Sandy lean clay, low plasticity, very stiff

2b

406

L7-S9

13.05 - 13.50

8.7

26.6

29.6

27.8

0.7

6.1

10.9

7.1

3.8

1.07

11.2

2.26

2.03

2.67

24.1

0.317

94.5

SM

Silty sand, low plasticity, loose state

407

L7-S10

14.55 - 15.00

4.8

0.9

3.3

33.1

10.3

47.6

42.0

14.7

27.3

0.43

26.5

1.95

1.54

2.76

44.1

0.790

92.4

CL

Lean clay, intermediate plasticity, very stiff

19

408

L7-T2

15.3 - 16.05

6.3

35.4

9.4

48.9

48.3

24.8

23.5

0.29

31.6

1.94

1.48

2.84

47.9

0.920

97.7

CL

Lean clay, intermediate plasticity, very stiff

409

L7-S11

16.05 - 16.50

1.4

7.6

34.2

8.9

47.9

45.7

23.5

22.1

0.14

26.6

1.99

1.57

2.78

43.5

0.771

96.0

CL

Lean clay, intermediate plasticity, very stiff

27

410

LL8-S1

1.05 - 1.50

33.4

48.3

12.3

0.0

0.9

20.1

SM

Silty Sand, loose state

411

LL8-S2

2.55-3.00

87.9

9.7

2.4

0.1

0.1

11.0

1.90

1.71

2.65

35.5

0.550

52.9

SM

Silty Sand, medium dense state

17

412

LL8-S4

5.55-6.00

69.3

26.0

4.5

0.0

0.2

15.8

2.03

1.75

2.69

35.0

0.538

79.2

SW

Well-graded sand, dense state

38

413

LL8-S5

7.05-7.50

61.1

33.7

4.9

0.1

0.2

16.8

2.02

1.73

2.67

35.2

0.544

82.4 SW-SM

Well-graded sand with silt, dense state

35

379

L4-10

380

33.6

24.1

22.3

0.2

2.6

14.55-15.00

3.0

12.1

30.1

13.0

41.8

45.2

23.4

21.8

L4-T1

15.3-16.05

4.2

11.5

29.1

10.4

44.9

42.6

20.4

22.2

381

L4-S12

17.55-18.00

6.8

40.7

23.7

1.6

7.0

382

L4-T2

18.3 - 19.05

7.0

54.0

30.7

0.8

7.5

383

L4-S13

19.05-19.50

1.3

8.9

11.4

46.7

25.4

1.5

384

L4-S14

20.55-21.00

4.3

19.8

24.6

26.0

24.4

385

L5-S3

4.05 - 4.50

59.9

35.3

386

L5-S4

5.55 - 6.00

1.0

60.0

387

L5-S6

8.55 - 9.00

0.9

388

L5-S7

10.05 - 10.50

4.8

389

L5-S8

11.55 - 12.00

390

L5-S9

13.05 - 13.50

391

L5-T1

13.8-14.55

392

L5-S10

14.55 - 15.00

393

L5-S11

16.05 - 16.50

394

L6-S1

395

401

4.9

3.5

12.2

0.4

15.3

5.1

18.9

11.4

7.5

0.70

H s rng
- Void ratio

SM

<0.002

92.2

0.005-0.002

0.308

0.075-0.005

23.5

15.5

0.425-0.075

2.66

1.7

2.0-0.4250

2.03

13.05-13.50

4.75-2.0

2.24

L4-S9

19.0-4.75

10.7

378

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

2.67

SC

M t
Description

Ph lc - Appendix 5-13/26

SPT

18.8

1.94

1.64

2.68

38.8

0.633

79.6 SP-SM

Poorly-graded sand with silt, very dense state

58

415

LL8-S9

13.05-13.50

28.5

55.4

13.9

0.3

1.9

15.9

2.13

1.84

2.66

30.7

0.444

95.4

SM

Silty Sand, medium dense state

20

416

LL8-S10

14.55-15.00

29.7

55.5

13.1

0.1

1.6

14.9

2.16

1.88

2.67

29.6

0.420

94.4

SM

Silty Sand, medium dense state

24

417

LL8-S11

16.05-16.50

28.5

55.0

14.5

0.1

1.9

15.5

2.17

1.88

2.66

29.3

0.415

99.3

SM

Silty Sand, dense state

33

418

LL8-S14

20.55-21.00

84.7

13.8

0.2

1.3

20.4

2.04

1.70

2.68

36.6

0.577

94.7

SM

Silty Sand, very dense state

73

LL8-S15

22.05-22.50

25.8

37.0

4.1

17.1

19.6

2.13

1.78

2.75

35.2

0.543

99.2 CL-ML

Sandy silty clay, very stiff

15

419

2.9

8.8

4.3

H s rng
- Void ratio

0.2

<0.002

0.0

0.005-0.002

5.5

0.075-0.005

66.3

0.425-0.075

28.0

2.0-0.4250

8.55-9.00

4.75-2.0

LL8-S6

19.0-4.75

414

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

M t
Description

Ph lc - Appendix 5-14/26

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Phng a K thut & Kim nh Cng trnh - Geotech Engineering & Quality Testing Department

BNG TNG HP CC CH TIU C L CA CC LP T (DI NC)


SUMMARY ON PHYSICO - MECHANICAL PROPERTIES OF SOIL LAYERS (OFF SHORE)
Cng trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Ngy - Date:

1.05 - 1.50

A15-S2

2.55 - 3.00

0.6

AA7-S2

2.55 - 3.00

AA7-S3

0.4

10.6

60.2

8.1

20.7

8.2

30.4

42.9

16.3

0.2

0.0

0.0

0.0

86.7

12.1

4.05 - 4.50

0.0

0.0

6.7

72.6

B2-S1

1.05 - 1.50

0.0

0.0

2.4

B3-S2

2.55 - 3.00

0.0

0.0

B4-S1

1.05 - 1.50

0.0

B4-S2

2.55 - 3.00

B5-S1

10

82.7

46.0

0.86

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

1.5

Silty Sand, very loose state

0(*)

SM

Silty Sand, medium dense state

18

98.8

SM

Silty Sand, very loose state

1(*)

0.647

96.9

SM

Silty sand with gravel, medium dense state

20

38.7

0.630

90.8 SP-SM

Poorly-graded sand with silt, loose state

2.67

30.7

0.444

99.8

SM

Silty sand, low plasticity, loose state

2.67

32.5

0.482

97.2

SM

Silty Sand, medium dense state

12

SP-SM

Poorly-graded sand with silt, medium dense state

14

SP-SM

Poorly-graded sand with silt, medium dense state

18

SM

Silty Sand, medium dense state

16

98.1

CL

Sandy lean clay, intermediate plasticity, medium stiff

0.597

97.8

SC

Clayey sand, low plasticity, medium dense state

13

0.591

98.4

SM

Silty Sand, medium dense state

14

SM

Silty Sand, medium dense state

10

90.7 SC-SM

Silty, clayey sand, medium dense state

11

0.578

85.0 SP-SM

Poorly-graded sand with silt, medium dense state

25

38.0

0.614

98.7

Silty Sand, medium dense state

26

2.71

49.1

0.964

98.3

20

2.70

36.0

0.562

99.9

17

2.10

1.81 2.77(*)

34.6

0.530

81.4

SM

Silty Sand, medium dense state

26

2.08

1.74

35.8

0.557

96.5

SM

Silty Sand, medium dense state

19

SM

Silty sand with gravel, medium dense state

14

88.7

SM

Silty Sand, very loose state

2(*)

0.907

92.8

SM

Silty Sand, loose state

0.949

97.2 SC-SM

Silty, clayey sand, very loose state

1(*)

SM

Silty Sand, medium dense state

12

SP

Poorly-graded sand, very loose state

3(*)

H s rng
- Void ratio

m Moisture Cont.,%

1(*)

M t
Description

77.4

1.54

0.87

2.68

67.6

2.084

99.6

MH

Elastic silt, very high plasticity, soft

1.4

13.1(*)

2.24

1.98

2.69

26.4

0.359

98.4

SM

0.2

1.0

24.5

2.03

1.63

2.72

40.0

0.666

99.8

19.0

0.3

1.4

24.2

2.03

1.63

2.72

40.0

0.666

86.6

10.3

0.8

0.0

23.6

1.99

1.61

2.65

39.3

11.7

81.6

6.3

0.1

0.3

21.1

2.01

1.66

2.71

0.8

15.5

52.7

25.0

1.4

4.7 13.2(*)

16.6

2.16

1.85

0.7

4.0

15.2

58.0

18.9

1.3

2.1

17.6

2.12

1.80

1.05 - 1.50

0.0

0.0

6.3

86.5

6.8

0.4

0.0

22.9

2.70

BB3-S1

1.05-1.5

0.0

0.0

5.1

85.3

9.2

0.0

0.4

24.1

2.68

11

BB4-S1

1.05-1.50

2.1

10.8

36.8

30.9

18.2

0.2

0.9

19.6

2.09

1.74

2.66

34.6

0.528

98.7

12

BB6-S3

4.05 - 4.50

0.0

0.0

0.9

47.0

34.3

2.2

24.2

2.02

1.63

2.72

40.2

0.671

13

BB6-S4

5.55 - 6.00

0.0

0.0

0.4

61.8

28.3

1.5

8.1

21.4

2.08

1.71

2.73

37.4

14

BB6-S5

7.05 - 7.50

0.0

0.0

0.0

72.2

24.4

0.2

3.2

21.6

2.06

1.69

2.69

37.1

15

BB9-S2

2.55 - 3.00

3.5

2.9

33.8

40.2

17.3

0.2

2.2

9.6(*)

16

BB9-S3

4.05 - 4.50

0.0

0.0

36.7

44.1

15.9

0.2

3.1

14.2

2.15

1.88

2.66

29.4

0.417

17

C2-S1

1.05 - 1.50

0.0

0.0

22.5

68.3

8.9

0.1

0.2

18.4

2.00

1.69

2.67

36.6

18

C2-S2

2.55 - 3.00

0.0

0.4

22.1

65.1

11.3

0.2

0.9

22.2

2.07

1.69

2.73

19

C2-S3

4.05 - 4.50

35.0(*)

1.86

1.38

20

C2-S4

5.55 - 6.00

20.8

2.09

1.73

21

C2-S5

7.05 - 7.50

7.3

19.6

34.3

19.1

19.5

0.0

0.3

15.6

22

CC1-1-S2

2.55 - 3.00

0.0

2.9

6.2

64.0

24.7

0.3

1.9

19.9

23

CC1-1-S3

4.05 - 4.50

17.3

16.6

25.6

17.9

22.2

0.0

0.5

16.0

24

CC1-1-S4

5.55 - 6.00

0.0

0.0

0.0

65.1

29.7

1.0

4.2

29.1(*)

1.85

1.43

2.70

47.0

0.887

25

CC1-1-S5

7.05 - 7.50

0.0

0.0

0.0

81.6

16.9

0.3

1.2

31.3(*)

1.86

1.41

2.69

47.6

26

CC1-1-S6

8.55 - 9.00

0.0

0.0

0.0

73.3

22.2

0.9

3.7

33.8(*)

1.87

1.40

2.73

48.7

27

D4-S1

1.05 - 1.50

0.0

13.3

24.2

44.8

16.9

0.0

0.8

17.1

28

L4-S1

1.05-1.50

0.0

0.0

92.2

6.9

0.9

0.0

0.0

14.9

10.4

36.7

st - Liquidity

Ch s do
- Plasticity Index

Gii hn do
- Plastic Limits, %

Gii hn chy
- Liquid Limits, %

<0.002

0.005-0.002

0.075-0.005

0.425-0.075

2.0-0.4250

St-Clay

Tnh cht vt l - Physical Properties

SPT

L7-S1

Bi-Silt

Gii hn Atterberg

Lp- Layer

Ct-Sand

4.75-2.0

19.0-4.75

Sn-Gravel

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %

2.7(*) 2.27(*)

15.6 38.2(*) 19.2(*) 19.0(*) 0.26(*)


24.3

14.5

9.8

0.70

2.67

2.71
2.79(*)

2.74
1.78

1.55

2.67

42.0

0.723

55.1

SM

Ph lc - Appendix 5-15/26

Lp- Layer

SPT

94.8

SM

Silty Sand, medium dense state

11

0.678

84.1

SC

Clayey sand, low plasticity, very loose state

2(*)

27.7

0.383

98.1

SM

Silty Sand, very loose state

2(*)

2.67

27.7

0.383

82.7

SM

Silty Sand, loose state

1.76

2.70

34.8

0.534

98.0 SW-SM

Well-graded sand with silt, medium dense state

11

1.74

2.69

35.2

0.543

95.1

SC

Clayey sand, low plasticity, medium dense state

15

SM

Silty Sand, loose state

14

L6-S1

1.05 - 1.50

0.0

0.0

52.4

39.6

7.5

0.1

0.4

18.1

30

L6-S2

2.55 - 3.00

0.0

0.0

52.8

41.3

5.6

0.0

0.3

22.5

2.01

1.64

2.69

38.9

0.637

31

L7-S2

2.55 - 3.00

0.7

7.8

31.8

30.9

24.1

1.0

3.7

21.4

1.92

1.59

2.67

40.4

32

L7-S3

4.05 - 4.50

7.3

24.1

30.5

15.6

22.0

0.1

0.4

14.1(*)

2.19

1.92

2.66

33

L7-S4

5.55 - 6.00

6.2

24.6

30.5

17.1

21.1

0.0

0.6

11.9(*)

2.16

1.93

34

L7-S6

8.55 - 9.00

2.2

1.6

57.7

30.7

7.4

0.0

0.3

19.4

2.10

35

L7-S7

10.05 - 10.50

0.0

0.0

30.0

39.4

22.2

1.4

7.0

19.2

2.07

36

LL8-S1

1.05 - 1.50

0.0

5.1

33.4

48.3

12.3

0.0

0.9

52.1

16.9

0.4

2.2

Trung bnh - Average

1.4

4.3

22.7

H.s b.i - Coe. Of Var.

22.1

12.4

11.6

8.0

10.5

1.12

0.73

2.66

20.1

22.3

12.3

0.09

0.14

10.0

0.78

2.67

20.0

2.03

0.15

0.06

K hiu - Symbol

Silty Sand, loose state

H s rng
- Void ratio

SM

29

20.4

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Ch s do
- Plasticity Index

Gii hn chy
- Liquid Limits, %

<0.002

Gii hn do
- Plastic Limits, %

Gii hn Atterberg
St-Clay

0.005-0.002

0.075-0.005

Bi-Silt
0.425-0.075

2.0-0.4250

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

1.70

2.69

36.8

0.583

M t
Description

92.5

0.01

0.43

Gtr nh nht - Min Value

0.6

0.4

0.4

6.9

0.9

0.0

0.2

20.4

10.4

10.0

0.38

14.2

1.78

1.56

2.65

0.700

Gtr ln nht - Max value

17.3

24.6

92.2

86.7

34.3

2.2

15.6

24.3

14.5

9.8

1.02

24.5

2.24

1.80

2.74

0.526

26

48.3

22.9

25.4

1.07

50.0

1.72

1.15

2.74

37

A16-S10

16.05 - 16.50

0.0

0.0

0.3

3.0

25.5

16.2

55.0

38

A16-S2

2.55 - 3.00

0.0

6.7

18.8

10.3

56.5

2.6

5.0

39

A16-S3

4.05 - 4.50

0.0

0.0

0.0

6.1

52.2

10.6

31.2

50.1

24.9

25.2

1.53 63.4(*) 1.62(*)

0.99

2.77

64.2

1.796

97.7

40

A16-S6

8.55 - 9.00

0.0

0.0

0.0

2.4

14.1

20.7

62.8

39.5

18.4

21.1

0.96

38.7

1.80

1.30

2.71

51.9

1.081

96.8

CL

41

A16-S7

10.05 - 10.50

0.0

0.0

1.4

7.2

39.7

11.6

40.1

41.0 12.0(*)

29.0

0.71

32.7

1.90

1.43

2.72

47.4

0.902

98.6

42

A16-S8

13.05 - 13.50

0.0

0.0

1.6

4.3

18.0

16.5

59.6 60.1(*) 35.0(*)

25.1

0.84

56.2

1.68

1.07

2.77

61.3

1.586

43

A16-S9

14.55 - 15.00

0.0

0.0

0.7

1.0

16.5

20.0

61.8 61.2(*)

28.1

33.1

0.93 58.9(*)

1.67

1.05

2.8(*)

62.5

44

A16-T1

11.00 - 11.90

0.0

0.0

0.0

0.7

21.4

16.2

61.8

52.1

24.0

28.2

0.84

47.5

1.77

1.20

2.8(*)

45

A2-S7

10.05 - 10.50

0.0

0.0

0.0

3.0

55.8

12.7

28.5

48.3

22.5

25.8

0.83

43.9

1.77

1.23

46

A2-S8

12.30 - 12.75

0.0

0.0

0.0

5.5

57.7

11.7

25.1

46.5

23.6

22.9

0.77

41.3

47

A2-S9

13.05 - 13.50

0.0

0.0

0.0

4.7

57.3

12.7

25.3

47.6

22.3

25.4

0.92

45.6

48

A2-T1

11.50 - 12.30

0.0

0.0

0.0

5.7

41.8

12.6

40.0

52.1

21.5

30.6

0.78

45.3

49

B13-S2

2.55 - 3.0

0.0

0.0

10.1

10.8

31.3

12.8

35.0

46.6

21.7

24.9

1.15

50.3

1.71

1.14

2.70

57.8

1.367

50

B3-S3

4.05 - 4.50

0.0

4.5

4.2

5.6

42.6

10.2

33.0

39.8

20.0

19.9

0.88

37.4

1.86

1.35

2.75

50.9

51

B3-S4

5.55 - 6.00

0.8

2.7

6.5

8.0

43.8

7.3

30.8

37.5

19.6

17.9

0.91

36.0

1.85

1.36

2.79

51.2

52

B3-S5

7.05 - 7.50

0.0

7.6

5.5

7.4

35.0

11.1

33.4

25.3(*)

1.93

1.54

53

B3-S6

10.05 - 10.50

0.0

1.1

1.0

2.5

43.2

10.2

42.0

36.0

16.6

19.4

0.33 22.9(*)

1.90

1.55

2.74

43.5

0.770

54

B3-T1

8.0-8.9

3.1

16.2

8.0

4.6

31.7

8.6

27.8

38.4

20.2

18.2

0.97

37.8

1.84

1.34

2.74

51.1

55

B5-S3

4.05 - 4.50

0.0

0.0

0.0

0.8

17.1

19.4

62.7

47.0

23.2

23.8

0.78

41.8

1.81

1.27

2.75

56

C2-S7

10.05 - 10.50

0.0

0.0

0.6

2.0

38.8

16.4

42.2

44.2

22.2

21.9

0.88

41.5

1.76

1.24

57

C2-S8

11.55 - 12.00

0.0

0.0

6.3

2.9

54.9

8.1

27.8

46.5

1.74

58

C4-S4

5.55 - 6.00

0.0

0.5

5.0

55.6

33.3

1.1

4.5

54.2

59

C5-S5

7.05 - 7.50

0.0

0.0

1.5

5.7

26.4

11.9

54.5

60

C5-S6

8.55 - 9.00

0.0

0.0

0.2

2.1

46.3

17.1

34.4
38.4

61

C5-S8

11.55 - 12.00

0.0

0.0

0.5

1.4

40.6

19.2

62

CC1-1-S8

11.55 - 12.00

0.0

0.0

0.0

0.0

66.9

4.9

58.0

1.381

99.1

CL

Lean clay, intermediate plasticity, soft

ML

Sandy silt, very soft

Lean clay, intermediate plasticity, soft

CL

Lean clay, intermediate plasticity, stiff

10

98.1

MH

Elastic silt, high plasticity, soft

1.668

99.0

CH

Fat clay, high plasticity, soft

57.1

1.330

99.9

CH

Fat clay, high plasticity, soft

2.67

54.0

1.174

99.9

CL

Lean clay, intermediate plasticity, soft

1.77

1.25 2.64(*)

52.7

1.113

98.0

CL

Lean clay, intermediate plasticity, soft

1.75

1.20

55.2

1.231

99.2

CL

Lean clay, intermediate plasticity, soft

CH

Fat clay, high plasticity, soft

99.3

CL

Lean clay with sand, intermediate plasticity, very soft

0.83333

1.037

99.3

CL

Lean clay, intermediate plasticity, soft

1.5

1.049

95.6

CL

Lean clay with sand, intermediate plasticity, soft

1.5

CL

Lean clay with sand, soft

81.7

CL

Lean clay, intermediate plasticity, medium stiff

1.046

99.0

CL

Sandy lean clay, intermediate plasticity, soft

53.7

1.162

98.7

CL

Lean clay, intermediate plasticity, soft

1.5

2.73

54.6

1.204

94.3

CL

Lean clay, intermediate plasticity, very soft

1.18

2.75

57.1

1.333

96.1 CL-ML

Silty clay, very soft

1.68

1.09

2.69

59.4

1.464

99.4

SM

Silty Sand, very loose state

33.7

1.89

1.41

2.73

48.3

0.936

98.4

CL

Lean clay, intermediate plasticity, medium stiff

43.8

1.76

1.23

2.73

54.9

1.219

98.1 CL-ML

Silty clay, soft

2.69

45.3

28.2 30.2(*)

23.4

18.6

21.9

11.6

0.47

1.28

2.68
2.70

42.0

1.81

1.27

2.74

53.7

1.159

99.5 CL-ML

Silty clay, very soft

33.4

1.89

1.42

2.73

48.0

0.922

98.9

Lean clay, low plasticity, very soft

0.67

CL

Ph lc - Appendix 5-16/26

SPT

3.0

25.8

34.9

21.0

13.8

1.11

36.4

1.84

1.35

2.71

50.2

1.008

97.9

CL

Lean clay with sand, low plasticity, very soft

64

CC3-S4

5.55 - 6.00

0.0

2.8

0.4

3.4

40.3

14.9

38.2

36.5

18.3

18.2

1.70

49.4

1.75

1.17

2.79

58.0

1.381

99.5

CL

Lean clay, intermediate plasticity, soft

1.5

65

CC3-S5

7.05 - 7.50

0.0

3.5

0.2

3.1

45.1

9.6

38.6

35.9

22.3

13.6

1.82

47.0

1.76

1.20

2.76

56.5

1.301

99.7

CL

Lean clay, intermediate plasticity, soft

66

CC3-S6

8.55 - 9.00

0.0

0.0

1.5

2.0

45.4

9.1

42.0

46.9

20.8

26.1

0.85

43.0

1.79

1.25

2.75

54.5

1.200

98.5

CL

Lean clay, intermediate plasticity, medium stiff

67

CC3-S7

10.10 - 10.55

0.0

0.0

0.2

1.0

46.5

9.6

42.7

49.8

22.2

27.6

0.83

45.2

1.75

1.21

2.73

55.7

1.259

98.1

CL

Lean clay, intermediate plasticity, hard

0/80

6.2

39.9

11.9

38.0

43.8

21.7

22.2

0.97

43.1

1.79

1.25

2.73

54.2

1.182

99.6

0.13

0.12

0.14

0.04

Trung bnh - Average

0.1

1.5

2.4

H.s b.i - Coe. Of Var.

H s rng
- Void ratio

51.3

<0.002

19.9

0.005-0.002

0.0

0.075-0.005

0.0

0.425-0.075

0.0

2.0-0.4250

13.05 - 13.50

4.75-2.0

CC1-1-S9

19.0-4.75

63

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

st - Liquidity

DT t Wet density, g/cm 3

Tnh cht vt l - Physical Properties


m Moisture Cont.,%

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

0.8

0.5

0.2

0.7

14.1

1.1

4.5

34.9

16.6

18.3

0.88

32.7

1.67

1.26

2.67

1.120

Gtr ln nht - Max value

3.1

16.2

18.8

55.6

66.9

20.7

62.8

52.1

28.1

24.0

1.17

56.2

1.93

1.24

2.79

1.253

A15-S6

8.55 - 9.00

0.0

6.7

18.8

10.3

55.6

3.5

5.0

69

A15-S7

11.55 - 12.00

0.0

0.0

5.9

20.9

59.6

4.5

9.1

70

A15-S8

13.05 - 13.50

0.0

0.4

8.9

5.3

34.7

71

A15-S9

14.55 - 14.95

0.0

0.0

1.3

2.2

72

A15-T1

9.60 - 10.50

0.0

0.0

1.2

73

A4-S3

4.05 - 4.50

0.0

0.0

74

A6-S6

8.55 - 9.00

0.0

75

A6-S7

10.05 - 10.50

76

A6-S8

77

2.69
38.8

0.01

Gtr nh nht - Min Value

68

M t
Description

ML

Sandy silt, stiff

2b

12

21.6

17.2

0.32

27.1

1.99

1.57

2.74

42.7

0.744

99.6

CL

Lean clay with sand, intermediate plasticity, stiff

2b

13.6

37.2 47.8(*) 25.2(*)

22.5

0.60 38.8(*)

1.79

1.29

2.74

52.9

1.122

94.7

CL

Lean clay, intermediate plasticity, medium stiff

2b

37.4

25.0

34.2 51.9(*)

23.1

28.8

0.62 41.0(*)

1.77

1.25

2.74

54.4

1.192

94.2

CH

Fat clay, high plasticity, medium stiff

2b

>50

3.2

37.0

13.5

45.1 48.4(*) 25.4(*)

23.0

0.19

29.8

1.96

1.51

2.76

45.4

0.830

99.3

CL

Lean clay, intermediate plasticity, stiff

2b

0.9

5.2

86.4

0.7

6.8

23.4

2.00

1.62

2.71

40.1

0.670

94.4

CL

Lean clay with sand, hard

2b

38

11.0

0.7

6.1

41.2

9.7

31.2

29.4

15.7

13.7

1.13

31.3

1.91

1.45

2.75

47.2

0.894

96.1

CL

Lean clay with sand, low plasticity, soft

2b

1.5

0.0

0.6

2.4

8.8

43.5

9.3

35.4

28.2

15.4

12.8

1.16

30.3

1.95

1.50

2.76

45.7

0.843

99.2

CL

Lean clay, low plasticity, soft

2b

13.05 - 13.50

0.0

0.0

4.8

15.2

53.7

6.2

20.1

CL

Lean clay, medium stiff

2b

A6-T1

11.5 - 12.4

0.0

0.0

0.2

4.9

50.2

10.0

34.8

35.5

18.5

17.0

0.97

35.0

1.85

1.37

2.77

50.5

1.021

95.0

CL

Lean clay, intermediate plasticity, medium stiff

2b

78

A7-S2

2.55 - 3.00

22.0

5.4

6.6

4.0

38.0

4.6

19.5

37.5

21.6

15.9

0.87 35.5(*)

1.79

1.32 2.51(*)

47.5

0.904

98.6

CL

Gravelly lean clay with sand, intermediate plasticity, stiff

2b

79

A7-S3

4.05 - 4.50

0.0

0.0

1.9

3.7

30.8

17.0

46.7

42.3

22.5

19.8

0.98 42.0(*) 1.75(*)

1.23

2.67

53.9

1.169

95.8

CL

Lean clay, intermediate plasticity, very stiff

2b

17

80

A8-S3

4.05-4.50

0.0

0.0

0.0

9.0

36.7

13.4

40.9

41.6

19.2

22.4

0.77 36.6(*)

1.86

1.36

2.73

50.2

1.009

99.0

CL

Lean clay, intermediate plasticity, soft

2b

81

A8-S5

10.05-10.50

0.0

0.0

0.0

0.0

76.8

4.1

19.1 19.6(*) 11.9(*)

7.8

1.02 19.7(*)

2.08

1.74

2.69

35.3

0.545

97.3

CL

Lean clay, low plasticity, medium stiff

2b

82

A8-S6

11.55-12.00

0.0

0.0

0.0

1.4

25.0

18.7

54.9 55.2(*) 25.5(*)

29.7

<0 13.7(*)

2.13

1.88

2.69

30.2

0.433

85.1

CH

Fat clay, high plasticity, hard

2b

36

83

A8-T1

8.50-9.40

0.0

0.0

0.7

25.6

59.4

3.4

10.9 25.0(*)

15.3

9.6

1.02

25.1

1.95

1.56

2.72

42.6

0.743

91.9

CL

Lean clay with sand, low plasticity, medium stiff

2b

84

AA7-T1

5.60 - 6.50

0.0

0.0

7.8

20.0

47.2

6.1

19.0 24.5(*)

14.8

9.7

1.06

25.1

1.98

1.58

2.70

41.5

0.710

95.5

CL

Lean clay with sand, low plasticity, very stiff

2b

85

B11-S1

1.05 - 1.50

0.0

0.0

1.4

15.5

28.9

11.5

42.7

35.7

18.6

17.1

0.64

29.5

1.95

1.50

2.70

44.4

0.799

99.7

CL

Lean clay with sand, intermediate plasticity, stiff

2b

86

B11-S2

2.55 - 3.00

0.0

0.0

0.2

1.5

32.3

14.3

51.6

40.1

20.2

19.9

0.66

33.2

1.88

1.41

2.68

47.4

0.902

98.7

CL

Lean clay, intermediate plasticity, medium stiff

2b

87

B11-S3

4.05 - 4.50

0.0

0.0

2.6

4.3

35.5

10.9

46.8

38.6

19.5

19.1

0.54

29.8

1.92

1.48

2.74

45.9

0.849

95.9

CL

Lean clay, intermediate plasticity, medium stiff

2b

88

B12-S2

2.55 - 3.00

0.0

0.0

0.8

1.7

19.4

14.8

63.3

39.0

21.5

17.4

0.86 36.5(*)

1.83

1.34

2.64

49.2

0.969

99.4

CL

Lean clay, intermediate plasticity, medium stiff

2b

89

B12-S3

4.05 - 4.50

0.0

0.0

1.1

2.0

21.2

14.3

61.4

42.5 24.6(*)

17.8

0.71 37.4(*)

1.83

1.33

2.67

50.2

1.009

99.0

CL

Lean clay, intermediate plasticity, medium stiff

2b

90

B12-S4

7.05 - 7.50

15.7

13.6

3.7

3.7

36.4

2.6

24.3 43.7(*) 24.9(*)

18.9

0.64 37.0(*)

1.83

1.34

2.66

49.6

0.983

100.0

CL

Sandy lean clay with gravel, intermediate plasticity, medium stiff

2b

91

B12-S5

8.55 - 9.00

0.0

0.7

5.7

4.4

32.5

14.2

37.6(*)

1.83

1.33

2.67

50.1

1.005

99.7 CL-ML

Silty clay, medium stiff

2b

92

B12-T1

5.00 - 5.80

93

B16-S1

1.05 - 1.50

0.0

2.0

20.2

9.7

56.8

3.5

94

B7-S2

2.55 - 3.00

0.0

0.0

1.7

22.7

29.8

7.3

38.5

95

B7-T1

3.70 - 4.60

0.0

0.0

0.0

31.2

41.1

3.7

24.1

96

BB3-S2

2.55-3.0

0.0

0.0

0.0

3.0

81.1

6.7

9.2

32.2

42.5

2.74

38.2

19.8

18.4

0.13

22.3

2.02

1.65

2.70

38.9

0.638

94.4

2b

7.9 24.9(*)

16.4

8.5

1.19

26.5

1.95

1.54

2.70

42.9

0.750

95.4

CL

Sandy lean clay, low plasticity, soft

2b

38.9

18.9

19.9

0.74

33.7

1.91

1.42

2.74

48.2

0.931

99.3

CL

Lean clay with sand, intermediate plasticity, soft

2b

2.5

28.4

14.8

13.6

0.82

25.9

1.99

1.58

2.67

40.9

0.692

100.0

CL

Sandy lean clay, low plasticity, soft

2b

17.7(*)

2.12

1.80

2.65

32.0

0.470

99.4

ML

Silt, stiff

2b

Ph lc - Appendix 5-17/26

SPT

9.8

8.9 18.6(*)

22.6

2.05

1.67 2.79(*)

40.2

0.673

94.0 CL-ML

Silty clay, very soft

2b

0.67

98

BB4-S3

4.05-4.50

0.0

0.0

12.0

12.0

62.3

5.1

8.6 13.7(*)

18.0(*)

2.16

1.83

2.78

34.3

0.522

96.3 CL-ML

Silty clay with sand, very soft

2b

99

BB6-T1

7.8 - 8.6

0.0

0.0

2.1

14.2

53.0

5.4

25.4

26.3 13.0(*)

13.3

22.4

2.07

1.69

2.72

37.9

0.610

99.8

CL

Lean clay with sand, low plasticity, stiff

2b

100

C5-S4

5.55 - 6.00

0.0

0.0

10.1

35.6

31.3

4.7

18.4 22.1(*) 13.2(*)

8.9

0.89 21.1(*)

2.05

1.69

2.70

37.4

0.598

95.3

CL

Sandy lean clay, low plasticity, stiff

2b

101

CC4-S4

5.55 - 6.00

0.0

0.0

1.7

6.9

35.0

9.5

46.9

33.7

16.9

16.8

0.23 20.8(*)

2.05

1.70

2.75

38.2

0.619

92.4

CL

Lean clay, low plasticity, stiff

2b

14

102

CC4-T1

6.7 - 7.5

0.0

0.0

1.4

5.0

42.2

9.5

41.9

34.2

17.4

16.8

0.28

22.1

2.06

1.69 2.79(*)

39.4

0.649

94.7

CL

Lean clay, low plasticity, hard

2b

60/80

103

D3-S1

1.05 - 1.50

0.0

0.0

1.4

30.8

61.5

0.7

5.7

26.0

1.92

1.52

2.76

44.9

0.816

87.8

ML

Sandy silt, stiff

2b

104

D4-S2

2.55 - 3.0

23.8

1.4

2.2

11.3

44.4

3.2

13.8 18.5(*) 12.9(*)

5.6

1.45 21.0(*)

2.05

1.70

2.70

37.1

0.590

96.4 CL-ML

Gravelly silty clay, low plasticity, medium stiff

2b

105

L7-T1

10.8-11.55

0.0

0.0

14.5

34.6

35.7

1.8

13.4 20.5(*) 11.0(*)

9.5

1.27

23.0

2.02

1.64 2.81(*)

41.6

0.711

90.8

Sandy lean clay, low plasticity, very stiff

2b

11.0

44.9

8.5

28.8

17.5

0.51

27.4

1.96

1.54

43.2

0.761

97.8

0.15

0.05

Trung bnh - Average

1.7

1.1

4.0

H.s b.i - Coe. Of Var.

36.0

18.6

0.14

0.14

0.70

2.71

H s rng
- Void ratio

67.5

<0.002

10.9

0.005-0.002

3.0

0.075-0.005

0.0

0.425-0.075

0.0

2.0-0.4250

2.55-3.00

4.75-2.0

BB4-S2

19.0-4.75

97

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

CL

M t
Description

2b

0.01

8
1.06

Gtr nh nht - Min Value

15.7

0.4

0.2

1.4

19.4

0.7

5.0

26.3

14.8

11.5

0.63

22.1

1.77

1.45

2.64

0.821

Gtr ln nht - Max value

23.8

13.6

20.2

35.6

86.4

25.0

63.3

42.5

23.1

19.4

0.62

35.0

2.16

1.60

2.78

0.743

38

106

A10-S3

4.05 - 4.50

0.0

0.0

0.0

0.5

92.2

7.1

0.2

0.0

21.2(*)

2.03

1.67

2.63

36.4

0.572

97.4 SP-SM

Poorly-graded sand with silt, very dense state

50

107

A10-S4

5.55 - 6.00

0.0

0.0

0.0

0.6

90.7

8.6

0.1

0.0

20.9(*)

2.02

1.67

2.64

36.8

0.583

94.6 SP-SM

Poorly-graded sand with silt, very dense state

50

108

A15-S4

5.55 - 6.00

0.0

0.0

7.0

43.9

28.8

18.3

0.2

1.8

10.0

2.28

2.07

2.68

22.7

0.293

91.5

SM

Silty Sand, medium dense state

22

109

A15-S5

7.05 - 7.50

0.0

0.6

8.2

30.4

42.9

16.3

0.2

1.4

SM

Silty Sand, medium dense state

20

110

A16-S4

5.55 - 6.00

0.0

0.0

2.1

39.6

33.2

22.0

0.5

2.6

11.7

2.17

1.94

2.69

27.9

0.387

81.4

SM

Silty Sand, loose state

111

A16-S5

7.05 - 7.50

0.0

0.0

0.0

30.1

37.5

26.7

0.6

5.1

14.9

2.17

1.89

2.71

30.2

0.432

93.3

SM

Silty Sand, loose state

112

A1-S4

5.55 - 6.00

0.0

26.8

10.3

11.7

24.2

26.8

0.1

0.3

26.6(*)

1.90

1.50

2.66

43.6

0.773

91.5

SM

Silty sand with gravel, loose state

113

A1-S5

7.05 - 7.50

19.9(*)

2.04

1.70

2.66

36.1

0.566

93.7

31

114

A2-S3

4.05 - 4.50

0.0

0.0

0.0

2.3

66.6

28.7

0.5

2.0

27.6(*)

1.96

1.53

2.67

42.7

0.746

98.9

SM

Silty Sand, dense state

35

115

A2-S4

5.55 - 6.00

0.0

0.0

0.0

1.5

65.5

30.2

0.6

2.2

23.2(*)

2.03

1.64

2.66

38.5

0.625

98.8

SM

Silty Sand, dense state

33

116

A2-S5

7.05 - 7.50

0.0

0.0

0.0

11.1

75.3

12.7

0.0

0.9

21.8(*)

1.98

1.62

2.68

39.5

0.653

89.3

SM

Silty Sand, dense state

33

117

A2-S6

8.55 - 9.00

0.0

0.0

0.0

12.2

73.0

13.6

0.1

1.1

19.8(*)

2.03

1.70

2.63

35.5

0.550

94.8

SM

Silty Sand, dense state

32

118

A3-S3

4.05 - 4.50

13.5

2.24

1.97

2.70

27.1

0.371

98.2

31

119

A3-S4

5.55 - 6.00

0.0

2.3

13.6

29.2

11.2

32.3

1.4

10.0

12.6

2.27

2.01

2.70

25.6

0.344

98.7

SP

Poorly-graded sand, medium dense state

17

120

A4-S4

5.55 - 6.00

0.0

0.0

0.0

4.6

83.5

10.8

1.1

0.0

25.1(*)

1.93

1.55

2.69

42.3

0.734

91.9

SM

Silty sand, loose state

121

A4-S5

7.05 - 7.50

19.6

14.4

14.8

12.5

18.6

19.8

0.0

0.3

7.8(*)

2.29

2.13

2.68

20.6

0.259

80.8

SM

Silty sand with gravel, very dense state

65

122

A4-S6

8.55 - 9.00

0.0

14.1

25.9

16.0

14.8

27.1

0.3

1.9

9.2(*)

2.25

2.06

2.66

22.4

0.289

84.2

SM

Silty Sand, very dense state

51

123

A5-S2

2.55 - 3.00

0.0

0.0

0.0

5.5

72.3

20.4

0.0

1.8

24.8(*)

2.00

1.60

2.70

40.8

0.688

97.5

SM

Silty Sand, medium dense state

23

124

A5-S3

4.05 - 4.50

0.0

1.7

6.4

41.6

35.0

14.0

0.0

1.3

16.6

2.16

1.85

2.70

31.4

0.457

97.9

SM

Silty Sand, dense state

30

125

A5-S4

5.55 - 6.00

0.0

1.0

1.0

55.2

29.6

11.8

1.3

0.0

14.8

2.21

1.92

2.69

28.5

0.399

99.7

SM

Silty Sand, very dense state

58

126

A5-S5

7.05 - 7.50

0.0

11.7

18.9

28.9

19.7

20.4

0.1

0.4

9.6(*)

2.24

2.04

2.67

23.5

0.307

83.1

SM

Silty Sand, very dense state

207.25

127

A5-S6

8.55 - 9.00

0.0

0.0

4.1

40.8

23.2

17.9

2.6

11.4

0.12 19.3(*)

2.11

1.77 2.78(*)

36.4

0.573

93.8

SC

Clayey sand, low plasticity, medium dense state

17

128

A6-S2

2.55 - 3.00

0.0

0.0

0.0

4.7

80.1

13.6

0.2

1.4

22.8(*)

2.05

1.67

38.2

0.617

99.6

SM

Silty Sand, dense state

41

129

A6-S3

4.05 - 4.50

0.0

0.0

0.3

46.3

28.5

23.9

0.2

0.8

11.8

2.16

1.93

2.68

28.1

0.390

81.3

SM

Silty Sand, dense state

44

130

A6-S4

5.55 - 6.00

0.0

2.2

7.5

42.8

32.7

14.1

0.0

0.8

9.5(*)

2.31

2.11

2.66

20.6

0.259

97.2

SM

Silty Sand, very dense state

90

2.69

32.4

17.6

14.9

2.70

Ph lc - Appendix 5-18/26

7.05 - 7.35

0.0

0.0

1.4

24.3

60.5

12.8

0.0

1.0

12.9

132

A8-S7

13.05-13.50

0.0

0.0

0.0

13.1

49.9

30.1

1.3

5.6

10.8

133

A8-S8

14.55-15.00

0.0

3.2

5.6

31.7

26.2

26.2

0.6

6.5 14.9(*)

134

A8-S9

16.05-16.50

0.0

4.7

14.5

37.0

25.4

17.9

0.1

0.4

135

A9-S4

5.55 - 6.00

0.0

0.0

0.0

4.7

46.7

28.8

2.8

17.0

136

AA7-S4

6.55 - 7.00

0.0

0.0

1.6

42.8

25.6

23.9

1.0

137

B10-S4

5.55 - 6.00

12.7

12.8

16.8

9.0

6.9

37.0

138

B11-S4

5.55 - 6.00

10.2

28.5

16.5

9.0

7.8

139

B15-S1

1.05 - 1.50

0.0

0.4

2.4

33.1

140

B1-S4

5.55 - 6.00

0.0

3.4

14.2

141

B2-S4

5.55 - 6.00

0.0

34.1

142

B4-S3

4.05 - 4.50

14.1

143

B4-S7

10.05 - 10.50

144

B4-S9

145

0.357

96.9

2.72

K hiu - Symbol

bo ha Deg. of Saturation

H s rng
- Void ratio

T trng Special Gravity

DT kh Dry density, g/cm3

rng - Porosity, %
26.3

SM

Silty Sand, very dense state

15/100

SM

Silty sand, very loose state

1.87

2.65

29.6

0.420

96.7 SC-SM

Silty, clayey sand, low plasticity, loose state

12.1

2.20

1.96

2.64

25.9

0.349

91.6

SM

Silty Sand, medium dense state

28

0.01 18.2(*)

2.13

1.80

2.69

33.1

0.494

98.8

SC

Clayey sand, intermediate plasticity, loose state

5.1

15.4

2.15

1.86

2.69

30.9

0.448

92.8 SC-SM

Silty, clayey sand, medium dense state

24

0.5

4.3

11.4

2.24

2.01

2.62

23.3

0.303

98.8

SM

Silty sand with gravel, dense state

36

26.3

0.3

1.5

9.6(*)

2.31

2.11

2.66

20.6

0.260

97.8

GM

Silty gravel with sand, very dense state

60

13.9

45.6

1.1

3.7

28.5(*)

1.96

1.52

2.71

43.9

0.781

98.8

ML

Sandy silt, very stiff

24

27.8

10.2

33.4

1.5

9.5

13.0

2.26

2.00

2.71

26.2

0.355

99.6

SM

Silty sand with gravel, medium dense state

13

9.9

16.8

13.1

25.2

0.1

0.8

14.1

SM

Silty sand with gravel, very dense state

75

30.0

16.0

8.0

12.4

19.0

0.0

0.6

9.3(*)

2.29

2.10

2.65

20.9

0.264

93.5

GM

Silty gravel with sand, dense state

34

59.4

4.9

4.2

2.1

3.3

20.0

2.8

3.4

36.0(*)

1.85

1.36

2.68

49.3

0.972

99.3

GM

Silty Gravel, medium dense state

17

13.05 - 13.50

0.0

3.6

5.1

20.4

22.6

35.7

3.3

9.2

<0 18.4(*)

1.99

1.68

2.65

36.7

0.580

84.3

SC

Clayey sand, low plasticity, medium dense state

23

B7-S3

5.00 - 5.45

0.0

0.0

0.0

0.2

72.2

23.7

0.5

3.5

18.3(*)

2.12

1.79

2.68

33.2

0.496

98.7

SM

Silty Sand, loose state

146

B7-S4

7.05 - 7.50

0.0

0.0

0.0

4.7

46.7

36.3

1.6

10.7

16.8(*)

2.12

1.82

2.67

31.8

0.466

96.4

SM

Silty Sand, loose state

147

BB3-S3

4.05-4.5

5.8

29.3

14.5

8.5

17.0

23.4

0.2

1.3

8.5(*) 2.33(*)

2.15

2.66

19.2

0.237

95.9

SM

Silty sand with gravel, medium dense state

18

148

BB4-S4

5.55-6.00

0.0

0.0

1.6

9.0

57.9

26.3

1.3

4.0

17.2(*)

2.13

1.82

2.68

32.0

0.471

97.8

SM

Silty Sand, very loose state

18

149

BB4-S5

7.05-7.50

14.0

41.2

13.2

4.2

12.6

14.7

0.0

0.2

9.1(*)

2.29

2.10

2.66

20.9

0.265

90.9

GM

Silty gravel with sand, medium dense state

50

150

BB6-S6

8.60 - 9.05

6.4

32.7

19.3

7.5

10.2

23.2

0.1

0.7

8.1(*)

GM

Silty gravel with sand, dense state

41

151

BB8-S2

2.55 - 3.00

0.0

0.0

1.1

27.0

58.4

12.3

0.0

1.2

13.2

2.21

1.95

2.68

27.3

0.375

94.3

SM

Silty Sand, dense state

48

152

BB8-S3

4.05 - 4.50

0.0

0.0

0.3

25.5

57.0

15.4

0.1

1.7

13.8

2.19

1.92

2.68

28.4

0.397

93.5

SM

Silty Sand, medium dense state

16

153

BB8-S4

5.55 - 6.00

0.0

0.0

0.0

24.5

59.5

14.4

0.1

1.5

13.4

2.14

1.89

2.68

29.6

0.420

85.7

SM

Silty Sand, medium dense state

20

154

BB8-S5

7.05 - 7.50

0.0

0.0

0.0

10.6

79.6

9.0

0.0

0.8

20.8(*)

2.07

1.71

2.69

36.4

0.572

97.8 SP-SM

Poorly-graded sand with silt, medium dense state

22

155

BB9-S4

5.55 - 6.00

0.0

0.6

8.5

49.9

24.7

15.5

0.0

0.8

10.7

2.30

2.01

2.66

24.3

0.321

88.6

Silty Sand, very dense state

68

156

BB9-S5

7.05 - 7.50

0.0

0.0

0.0

57.9

30.9

10.2

0.1

1.0

11.9

2.15

1.92

2.67

28.2

0.393

81.2 SW-SM

Well-graded sand with silt, very dense state

63

157

BB9-S6

8.55 - 9.00

0.0

4.9

12.8

41.6

21.6

18.4

0.0

0.7

9.9(*)

2.19

1.99

2.65

24.8

0.330

79.1

Silty Sand, very dense state

101

158

C4-06(1)

8.55 - 9.00

0.0

0.0

8.1

21.6

19.6

37.5

4.6

8.7

11.6

2.26

2.02

2.65

23.7

0.311

99.1 CL-ML

Sandy silty clay, very stiff

29

159

C4-S5

7.05 - 7.50

0.0

0.0

0.0

19.0

42.0

32.4

1.0

5.6

25.3(*)

1.98

1.58

2.66

40.6

0.684

98.3 SC-SM

Silty, clayey sand, medium dense state

12

160

C4-S6

8.55 - 9.00

18.4(*)

2.10

1.77

2.66

33.4

0.501

97.7

161

C4-S7

10.05 - 10.50

0.0

12.3

29.6

24.5

8.9

24.4

0.0

0.3

13.5

2.14

1.88

2.65

28.9

0.407

87.9

SC

Clayey sand, low plasticity, medium dense state

23

162

C4-S8

11.55 - 12.00

0.0

35.0

20.3

10.4

13.2

20.9

0.1

0.3

6.0(*)

1.96

1.85

2.66

30.4

0.437

36.3

SM

Silty sand with gravel, medium dense state

22

163

C5-S10

15.00 - 15.45

13.7

2.23

1.96

2.70

27.5

0.379

97.6

164

C5-S9

13.05 - 13.50

14.8

2.17

1.89

2.71

30.2

0.432

92.7

165

CC1-1-S10

14.55 - 15.00

0.0

2.7

18.7

19.7

16.4

35.0

0.6

6.9

11.9

2.26

2.02

2.69

25.0

0.333

96.6 SC-SM

Silty, clayey sand, medium dense state

13

166

CC3-S8

11.55 - 12.00

0.0

15.5

12.2

31.6

20.7

19.5

0.1

0.4

10.1

SM

Silty sand with gravel, hard

50

167

CC4-S5

8.55 - 9.00

6.6

24.1

14.8

9.1

25.2

19.1

0.2

1.0

9.9(*)

2.31

2.10

2.68

21.6

0.275

96.7

SM

Silty sand with gravel, very dense state

94

168

CC4-S6

10.05 - 10.50

10.9

14.2

15.9

20.5

18.2

19.9

0.1

0.3

10.0

2.29

2.09

2.69

22.4

0.289

93.0

SM

Silty sand with gravel, very dense state

120

169

CC4-S7

11.55 - 12.00

0.0

35.3

21.1

9.1

8.3

25.0

0.1

1.1

12.3

2.66

SM

Silty sand with gravel, dense state

30

170

D1-S5

5.55 - 6.00

18.2

20.2

13.6

2.6

7.1

34.1

1.8

2.5

8.8(*)

2.67

GM

Silty gravel with sand, dense state

31

29.0

28.2

18.7

18.0

17.2

10.3

10.3

1.06

2.69

2.20

18.0

6.8

1.98

M t
Description

15.3

35.3

8.1(*)

2.23

SPT

A6-S5

Lp- Layer

131

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Ch s do
- Plasticity Index

Gii hn chy
- Liquid Limits, %

<0.002

Gii hn do
- Plastic Limits, %

Gii hn Atterberg
St-Clay

0.005-0.002

0.075-0.005

Bi-Silt
0.425-0.075

2.0-0.4250

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

<0

2.67

2.70

2.70

SM

SM

Ph lc - Appendix 5-19/26

SPT

31

0.2

2.61

SP

Poorly-graded sand, dense state

32

0.4

0.2

2.62

SP

Poorly-graded sand, dense state

34

5.2

0.5

0.2

2.64

SP-SM

Poorly-graded sand with silt, dense state

35

76.5

21.5

1.2

0.2

2.62

SM

Silty Sand, dense state

36

0.6

75.6

22.4

1.2

0.3

2.63

SM

Silty Sand, dense state

36

0.0

1.4

67.1

27.7

3.4

0.4

2.64

SM

Silty Sand, dense state

35

1.8

5.0

50.1

22.3

18.4

0.3

2.1

2.64

SM

Silty Sand, medium dense state

29

0.0

0.0

0.1

26.7

62.5

9.7

0.2

0.8

2.61

SP-SM

Poorly-graded sand with silt, dense state

30

1.05 - 1.50

0.0

0.0

0.2

2.1

88.9

4.5

1.5

2.9

2.65

SP-SC

Poorly-graded sand with silty clay, dense state

31

L2-S10

14.55 - 15.00

0.0

0.3

3.4

62.2

7.4

26.2

0.1

0.5

2.67

SM

Silty Sand, dense state

36

183

L2-S11

16.05 - 16.50

0.0

0.8

3.8

61.9

23.0

10.2

0.0

0.3

2.64

SW-SM

Well-graded sand with silt, medium dense state

23

184

L2-S2

2.55 - 3.00

0.0

0.0

0.0

6.7

90.3

1.6

0.4

1.0

2.63

SP

Poorly-graded sand, dense state

33

185

L2-S3

4.05 - 4.50

0.0

0.0

0.5

4.4

91.2

3.5

0.3

0.3

2.64

SP

Poorly-graded sand, dense state

35

186

L2-S4

5.55 - 6.00

0.0

0.0

0.0

0.6

69.8

28.2

0.4

1.0

2.61

SM

Silty Sand, dense state

35

187

L2-S5

7.05 - 7.50

0.0

0.0

0.8

3.2

86.4

8.2

0.4

1.0

2.65

SP-SM

Poorly-graded sand with silt, dense state

35

188

L2-S6

8.55 - 9.00

0.0

0.0

0.1

2.9

80.1

15.8

0.4

0.7

2.63

SM

Silty Sand, dense state

45

189

L2-S7

10.05 - 10.50

0.0

0.0

0.2

49.8

38.1

10.9

0.1

0.9

2.63

SW-SM

Well-graded sand with silt, very dense state

52

190

L2-S8

11.55 - 12.00

13.7

4.9

10.2

25.1

7.4

34.0

0.3

4.5

2.66

SM

Silty sand with gravel, dense state

39

191

L2-S9

13.05 - 13.50

0.0

1.7

9.0

49.3

9.1

30.2

0.1

0.6

2.64

SM

Silty Sand, dense state

37

192

L3-S2

2.55 - 3.00

0.0

0.0

0.0

49.7

46.4

3.7

0.0

0.2

14.0

2.03

1.78

2.68

33.7

0.508

74.1

SP

Poorly-graded sand, very dense state

92

193

L3-S3

4.05 - 4.50

0.0

0.0

0.8

25.5

70.5

2.9

0.0

0.2

18.2(*)

2.04

1.73

2.70

36.0

0.563

87.7

SP

Poorly-graded sand, very dense state

56

194

L3-S4

5.55 - 6.00

0.0

0.0

0.0

28.6

62.2

8.3

0.0

0.9

15.9

2.18

1.88

2.69

30.2

0.432

98.8 SP-SM

Poorly-graded sand with silt, dense state

49

195

L3-S5

7.05 - 7.50

0.0

19.6

9.3

9.8

39.1

21.8

0.0

0.5

16.3

2.13

1.83

2.69

31.9

0.469

93.5

SM

Silty sand with gravel, very dense state

56

196

L3-S6

8.55 - 9.00

18.7

21.9

11.5

10.0

15.8

21.3

0.2

0.6

9.2(*)

2.28

2.09

2.67

21.8

0.279

88.3

GM

Silty gravel with sand, very dense state

136

197

L4-S2

2.55-3.00

0.0

0.0

0.0

90.5

7.9

1.5

0.0

0.0

11.6

1.81

1.62

2.66

39.1

0.643

48.1

SP

Poorly-graded sand, medium dense state

27

198

L4-S3

4.05-4.50

21.4

16.0

23.0

13.6

3.2

22.8

0.1

0.1

18.6(*)

2.04

1.72

2.67

35.5

0.551

90.0

SM

Silty sand with gravel, dense state

35

199

L4-S4

5.55-6.00

0.0

0.0

0.4

74.1

19.2

6.0

0.0

0.3

21.8(*)

1.95

1.60

2.68

40.3

0.676

86.5 SW-SM

Well-graded sand with silt, very dense state

103

200

L4-S5

7.05-7.50

0.0

0.0

0.0

45.2

32.5

18.7

0.7

2.9

12.6

2.16

1.92

2.69

28.6

0.400

84.5

Silty Sand, medium dense state

15

201

L4-S6

8.55-9.00

0.0

9.7

20.3

21.6

14.1

27.1

0.8

6.6

10.6

2.09

1.89

2.67

29.3

0.415

68.0 SC-SM

Silty, clayey sand, medium dense state

16

202

L4-S7

10.05-10.50

6.0

15.4

24.5

14.8

15.6

23.0

0.0

0.8

8.3(*)

2.03

1.87

2.66

29.8

0.424

51.9

SM

Silty sand with gravel, medium dense state

23

203

L4-S9

13.05-13.50

0.0

1.7

15.5

33.6

24.1

22.3

0.2

2.6

10.7

2.24

2.03

2.66

23.5

0.308

92.2

SM

Silty Sand, dense state

37

204

L5-S10

14.55 - 15.00

0.0

0.0

5.7

20.4

16.2

36.6

3.9

17.3

0.46 19.6(*)

2.11

1.76

2.75

36.0

0.563

95.9

CL

Sandy lean clay, low plasticity, hard

41

205

L5-S3

4.05 - 4.50

0.0

0.0

0.0

59.9

35.3

4.6

0.2

0.0

15.8

1.96

1.70

2.68

36.7

0.579

73.2

SM

Silty Sand, medium dense state

22

206

L5-S4

5.55 - 6.00

0.0

0.0

1.0

60.0

35.1

3.8

0.0

0.1

16.7

2.03

1.74

2.69

35.3

0.545

82.4

SW

Well-graded sand, dense state

37

207

L5-S6

8.55 - 9.00

0.0

0.0

0.9

68.8

25.3

4.8

0.2

0.0

14.1

1.96

1.72

2.68

35.9

0.560

67.4 SW-SM

Well-graded sand with silt, very dense state

80

208

L5-S7

10.05 - 10.50

0.0

0.0

4.8

51.7

37.8

5.5

0.2

0.0

17.8(*)

2.01

1.71

2.68

36.2

0.568

83.9 SW-SM

Well-graded sand with silt, very dense state

63

209

L5-S8

11.55 - 12.00

0.0

0.0

0.0

47.7

20.2

19.5

1.4

11.3

12.3

2.20

1.96

2.68

26.9

0.368

89.4 SC-SM

Silty, clayey sand, medium dense state

22

210

L5-S9

13.05 - 13.50

0.0

0.0

3.9

44.2

16.8

25.5

1.1

8.6

12.7

2.16

1.92

2.70

28.9

0.406

84.6 SC-SM

Silty, clayey sand, medium dense state

10

171

D1-S6

7.05 - 7.50

13.7

26.2

17.9

9.3

9.7

22.5

0.1

0.6

172

L1-S10

14.55 - 15.00

0.0

0.0

0.0

30.2

13.9

30.4

5.0

20.5

173

L1-S2

2.55 - 3.00

0.0

0.0

0.0

0.9

94.3

4.2

0.5

174

L1-S3

4.05 - 4.50

0.0

0.0

0.0

1.2

94.7

3.5

175

L1-S4

5.55 - 6.00

0.0

4.2

0.6

1.6

87.7

176

L1-S5

7.05 - 7.50

0.0

0.0

0.0

0.6

177

L1-S6

8.55 - 9.00

0.0

0.0

0.0

178

L1-S7

10.05 - 10.50

0.0

0.0

179

L1-S8

11.55 - 12.00

0.0

180

L1-S9

13.05 - 13.50

181

L2-S1

182

12.0
25.8

26.9

13.5

13.4

12.3

13.5

H s rng
- Void ratio

Sandy lean clay, low plasticity, hard

<0.002

CL

0.005-0.002

2.69

0.075-0.005

32

0.425-0.075

2.0-0.4250

Silty gravel with sand, dense state

4.75-2.0

GM

19.0-4.75

2.69

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

SM

M t
Description

Ph lc - Appendix 5-20/26

L5-T1

13.8-14.55

0.0

3.5

10.3

29.1

12.8

30.6

2.2

11.5

212

L6-S4

5.55 - 6.00

0.0

0.0

0.0

28.2

68.6

3.1

0.2

213

L6-S7

10.05 - 10.50

0.0

0.0

0.0

48.2

48.0

3.6

214

L6-S8

11.55 - 12.00

0.0

0.0

0.0

41.9

41.6

215

L7-S9

13.05 - 13.50

0.0

0.4

8.7

26.6

216

LL8-S10

14.55-15.00

0.0

0.0

0.0

217

LL8-S11

16.05-16.50

0.0

0.0

218

LL8-S14

20.55-21.00

0.0

219

LL8-S2

2.55-3.00

220

LL8-S4

221

SPT

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

H s rng
- Void ratio

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

2.72

29.0

0.408

69.4

SC

Clayey sand, low plasticity, medium dense state

0.0

19.9(*)

2.05

1.71

2.67

36.1

0.564

94.4

SP

Poorly-graded sand, medium dense state

29

0.2

0.0

21.4(*)

2.04

1.68

2.65

36.5

0.576

98.3

SP

Poorly-graded sand, medium dense state

27

14.4

0.3

1.8

10.6

2.24

2.03

2.67

24.0

0.316

89.5

SM

Silty Sand, dense state

32

29.6

27.8

0.7

6.1 10.9(*)

11.2

2.26

2.03

2.67

24.1

0.317

94.5

SM

Silty sand, low plasticity, loose state

29.7

55.5

13.1

0.1

1.6

14.9

2.16

1.88

2.67

29.6

0.420

94.4

SM

Silty Sand, medium dense state

24

0.0

28.5

55.0

14.5

0.1

1.9

15.5

2.17

1.88

2.66

29.3

0.415

99.3

SM

Silty Sand, dense state

33

0.0

0.0

0.0

84.7

13.8

0.2

1.3

20.4(*)

2.04

1.70

2.68

36.6

0.577

94.7

SM

Silty Sand, very dense state

73

0.0

0.0

0.0

87.9

9.7

2.4

0.1

0.1

11.0

1.90

1.71

2.65

35.5

0.550

52.9

SM

Silty Sand, medium dense state

17

5.55-6.00

0.0

0.0

0.0

69.3

26.0

4.5

0.0

0.2

15.8

2.03

1.75

2.69

35.0

0.538

79.2

SW

Well-graded sand, dense state

38

LL8-S5

7.05-7.50

0.0

0.0

0.0

61.1

33.7

4.9

0.1

0.2

16.8

2.02

1.73

2.67

35.2

0.544

82.4 SW-SM

Well-graded sand with silt, dense state

35

222

LL8-S6

8.55-9.00

0.0

0.0

0.0

28.0

66.3

5.5

0.0

0.2

18.8(*)

1.94

1.64

2.68

38.8

0.633

79.6 SP-SM

Poorly-graded sand with silt, very dense state

58

223

LL8-S9

13.05-13.50

0.0

0.0

0.0

28.5

55.4

13.9

0.3

1.9

15.9

2.13

1.84

2.66

30.7

0.444

95.4

Silty Sand, medium dense state

20

39.4

18.6

0.6

2.6

13.1

2.12

1.88

2.67

29.8

0.424

82.6

0.15

0.06

5.3

5.7

25.6

H.s b.i - Coe. Of Var.

30.2

16.7

0.12

0.13

3.8

13.5

<0

DT t Wet density, g/cm 3

m Moisture Cont.,%

st - Liquidity

1.93

7.1(*)

15.9

M t
Description

2.14

2.2

17.8

Tnh cht vt l - Physical Properties

10.4

Trung bnh - Average

33.6

Ch s do
- Plasticity Index

Gii hn chy
- Liquid Limits, %

<0.002

211

Gii hn do
- Plastic Limits, %

Gii hn Atterberg
St-Clay

0.005-0.002

0.075-0.005

Bi-Silt
0.425-0.075

2.0-0.4250

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

1.07

<0

SM

0.01

Gtr nh nht - Min Value

5.8

0.3

0.1

0.2

3.2

1.5

0.0

0.0

25.8

13.4

12.4

10.0

1.81

1.64

2.61

0.587

Gtr ln nht - Max value

59.4

41.2

29.6

90.5

94.7

45.6

5.0

20.5

35.3

18.7

16.6

16.8

2.31

1.98

2.75

0.390

19.0

41.0

3.2

7.6 22.9(*)

19.8

3.1

2.49

27.5

1.91

1.50

2.65

43.3

0.765

95.2 CL-ML

26.4

15.6

10.8

1.43

31.0

1.92

1.46

2.67

45.4

0.831

99.8

21.0

2.05

1.69

2.65

36.3

0.569

97.9

CL

Lean clay, stiff

CL

Sandy lean clay, low plasticity, stiff

224

A10-S10

16.05 - 16.50

23.5

1.0

4.7

Sandy silty clay, low plasticity, stiff

225

A10-S5

7.05 - 7.50

226

A10-S6

8.55 - 9.00

0.0

0.0

2.4

4.7

51.1

5.5

36.3

227

A10-S7

11.55 - 12.00

0.0

6.7

4.2

20.0

49.9

1.7

17.5 21.1(*)

14.0

7.2

1.06

21.6

2.03

1.67

2.65

37.0

0.588

97.2

228

A10-S8

13.05 - 13.50

0.0

0.0

6.5

16.7

48.7

2.8

25.3 21.4(*)

14.8

6.5

1.25

23.0

2.05

1.66

2.71

38.7

0.632

98.7 CL-ML

Silty clay with sand, low plasticity, stiff

229

A10-S9

14.55 - 15.00

0.0

0.0

9.4

25.3

47.9

4.0

13.4 18.6(*)

14.6

4.0

1.18

19.3

2.09

1.76

2.68

34.4

0.524

98.7 CL-ML

Sandy silty clay, low plasticity, stiff

230

A10-T1

9.5 - 10.3

0.0

0.0

3.8

14.9

54.2

4.4

22.7 11.6(*)

9.6(*)

2.0

4.86

19.5

2.08

1.74

2.70

35.6

0.552

95.3

ML

Silt with sand, low plasticity, stiff

231

A1-S6

10.05 - 10.50

0.0

0.0

1.5

4.3

52.0

12.4

29.8 21.8(*)

21.4

0.4

68.31 51.2(*)

1.70

1.12

2.67

58.1

1.388

98.6

ML

Silt, low plasticity, medium stiff

232

A1-T1

8.50-9.30

0.0

0.0

19.4

11.1

36.3

6.9

26.3

29.9

17.9

12.1

1.88 40.6(*)

1.78

1.27

2.68

52.6

1.109

98.0

CL

Sandy lean clay, low plasticity, medium stiff

233

A3-S5

7.05-7.50

0.0

0.0

0.6

1.7

31.7

18.3

47.7

38.1

23.1

15.1

0.14

25.2

2.01

1.61

2.72

40.7

0.687

99.8

CL

Lean clay, intermediate plasticity, stiff

234

A3-S6

8.55-9.00

0.0

0.0

8.6

5.8

31.6

14.4

39.6

35.8

23.7

12.1

0.75

32.8

1.89

1.43

2.76

48.1

0.928

97.3

CL

Lean clay, intermediate plasticity, stiff

12

235

A3-S7

10.05-10.50

0.0

0.0

10.4

8.6

37.9

14.0

29.1 24.3(*)

16.5

7.8

1.54

28.5

1.97

1.53

2.74

44.1

0.790

98.7

CL

Lean clay with sand, low plasticity, stiff

12

236

A3-S8

11.55-12.00

0.0

0.0

9.0

12.6

46.1

7.8

24.5 23.7(*)

15.3

8.4

1.09

24.5

2.02

1.62

2.71

40.2

0.671

98.7

CL

Lean clay with sand, low plasticity, stiff

12

237

A4-S7

10.05 - 10.50

5.5

21.1

3.4

7.3

33.7

7.3

21.7 22.2(*)

15.5

6.8

0.45

18.5

2.13

1.80

2.71

33.6

0.506

99.3 CL-ML

Sandy silty clay, low plasticity, hard

238

A4-T1

11.0 - 11.9

0.0

0.0

9.3

22.6

43.7

3.5

21.0

27.6 10.0(*)

17.6

0.39

17.0

2.14

1.83

2.67

31.5

0.460

98.6

CL

Sandy lean clay, low plasticity, hard

239

A5-T1

10.0 - 10.9

0.0

15.9

6.8

4.6

28.9

11.0

32.8

41.3

20.7

20.6

0.16

24.0

1.96

1.58 2.80(*)

43.5

0.771

87.2

CL

Lean clay with sand, intermediate plasticity, very stiff

240

A9-S10

14.55 - 15.00

0.0

0.0

0.0

2.8

39.0

13.1

45.1

38.7

19.4

19.3

0.55

30.1

1.93

1.48

2.68

44.7

0.808

99.7

CL

Lean clay, intermediate plasticity, medium stiff

241

A9-S5

7.60 - 8.15

0.0

0.0

2.4

42.0

35.0

2.0

18.7 20.9(*) 12.6(*)

8.3

0.56

17.3

2.04

1.74

2.65

34.3

0.522

87.7

CL

Sandy lean clay, low plasticity, stiff

242

A9-S6

8.55 - 9.00

0.0

0.0

1.3

3.6

40.3

11.5

43.3

25.2 13.1(*)

12.1

0.74

22.0

2.06

1.69

2.69

37.2

0.592

100.0

CL

Lean clay, low plasticity, very stiff

16

243

A9-S7

10.05 - 10.50

0.0

4.2

2.0

6.3

32.5

10.2

44.9

40.8

21.5

19.3

0.21

25.5

1.97

1.57

2.70

41.9

0.721

95.6

CL

Lean clay, intermediate plasticity, very stiff

15

244

A9-S8

11.55 - 12.00

0.0

0.0

0.0

4.1

37.4

12.4

46.1

32.7

17.3

15.4

0.28

21.6

2.07

1.70

2.69

36.9

0.585

99.3

CL

Lean clay, low plasticity, stiff

14

Ph lc - Appendix 5-21/26

SPT

12.5

44.8

39.8

20.9

18.8

0.44

29.1

1.94

1.50

2.67

43.8

0.780

99.7

CL

Lean clay, intermediate plasticity, medium stiff

246

A9-T1

6.80 - 7.50

0.0

0.0

0.0

5.1

26.5

12.7

55.7 47.6(*)

22.4

25.2

0.04

23.5

1.99

1.61

2.73

40.9

0.693

92.6

CL

Lean clay, intermediate plasticity, stiff

247

AA7-S5

8.55 - 9.00

0.7

1.0

5.5

20.7

56.9

4.4

10.8

18.5

2.04

1.72

2.71

36.4

0.573

87.3

ML

Sandy silt, very stiff

22

248

B10-S5

7.05 - 7.50

11.1

7.3

6.3

7.4

57.4

3.2

7.3

22.9

2.05

1.67

2.71

38.3

0.620

99.8

ML

Sandy silt, hard

31

249

B10-S7

10.05 - 10.50

0.0

1.3

8.2

15.3

57.2

4.5

13.6

31.5

1.88

1.43

2.63

45.6

0.838

98.7 CL-ML

Silty clay with sand, hard

45

250

B11-S5

7.05 - 7.50

0.0

0.0

0.0

2.1

69.5

10.7

17.7 46.1(*) 28.8(*)

17.2

0.29

33.8

1.83

1.37

2.71

49.4

0.978

93.6

ML

Silt, intermediate plasticity, very stiff

23

251

B11-S6

8.55 - 9.00

0.0

0.0

2.3

15.1

61.4

7.0

14.2 42.6(*) 25.4(*)

17.2

0.46

33.2

1.88

1.41

2.70

47.8

0.914

98.2

CL

Lean clay with sand, intermediate plasticity, very stiff

25

252

B1-S5

7.05 - 7.50

11.8(*)

2.29

2.05

2.71

24.3

0.321

99.9

11

253

B2-S6

8.55 - 9.00

0.0

0.0

0.3

13.5

58.8

4.8

254

B2-S7

11.55 - 12.00

0.0

0.0

0.0

3.8

53.7

255

B2-S8

13.05 - 13.50

0.0

0.0

0.0

5.3

256

B2-S9

14.55 - 15.00

0.0

0.0

0.0

257

B2-T1

10.00 - 10.90

0.0

0.0

258

B2-T2

16.00 - 16.80

0.0

259

B3-S8

13.05 - 13.50

260

B4-S4

261

22.6

H s rng
- Void ratio

41.1

<0.002

1.6

0.005-0.002

0.0

0.075-0.005

0.0

0.425-0.075

0.0

2.0-0.4250

13.05 - 13.50

4.75-2.0

A9-S9

19.0-4.75

245

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

st - Liquidity

DT t Wet density, g/cm 3

Tnh cht vt l - Physical Properties


m Moisture Cont.,%

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

M t
Description

29.9

16.8

13.1

1.11

31.4

1.91

1.45

2.68

45.8

0.846

99.3

CL

Lean clay, low plasticity, medium stiff

13.5

29.0 47.2(*)

20.6

26.6

0.65 37.9(*)

1.81

1.31

2.67

51.0

1.041

97.4

CL

Lean clay, intermediate plasticity, medium stiff

52.6

9.6

32.5 45.4(*)

19.4

26.0

0.69 37.3(*)

1.83

1.33

2.67

50.1

1.006

98.9

CL

Lean clay, intermediate plasticity, medium stiff

3.6

65.3

9.9

21.2 43.3(*)

20.4

22.9

0.70 36.5(*)

1.84

1.34

2.66

49.6

0.985

98.7

CL

Lean clay, intermediate plasticity, medium stiff

0.0

3.5

56.7

14.5

25.3 60.3(*) 27.3(*)

33.0

0.58 46.5(*)

1.75

1.20

2.72

56.0

1.271

99.7

CH

Fat clay, high plasticity, medium stiff

0.0

0.8

9.2

50.0

6.8

33.2

12.7

0.46

20.8

2.06

1.70

2.64

35.6

0.552

99.3

CL

Lean clay, low plasticity, medium stiff

3.0

10.5

11.4

13.7

53.3

2.7

5.5

16.9

2.11

1.81

ML

Sandy silt, medium stiff

5.55 - 6.00

10.0

11.1

11.1

6.4

39.2

4.5

17.7

19.6

2.07

1.73

2.67

35.1

0.542

96.6

CL

Lean clayl with sand, stiff

10

B4-S6

8.55 - 9.00

0.0

0.0

12.3

10.3

51.7

9.1

16.8

20.3

13.8

0.68

29.7

1.94

1.49

2.68

44.5

0.802

99.3

CL

Lean clay with sand, low plasticity, very stiff

15

262

B5-S10

16.05 - 16.47

0.0

0.0

0.0

0.0

76.7

4.7

18.6 21.1(*) 12.9(*)

8.2

0.76

19.2

2.08

1.75

2.75

36.5

0.574

92.0

CL

Lean clay, low plasticity, hard

36

263

B5-S4

7.05 - 7.50

0.0

0.0

0.9

15.4

60.2

4.7

18.8

16.1

10.7

0.89

25.7

2.02

1.60

2.72

41.1

0.698

99.8

CL

Lean clay with sand, low plasticity, stiff

13

264

B5-S5

8.55 - 9.00

0.0

0.0

1.9

22.4

46.2

5.1

24.4 22.4(*) 12.3(*)

10.1

0.61

18.4

2.11

1.78

2.74

35.1

0.542

93.3

CL

Lean clay with sand, low plasticity, stiff

11

265

B5-S6

10.10 - 10.55

0.0

0.0

1.3

12.2

47.3

7.5

31.7

27.3

15.7

11.6

0.49

21.4

2.09

1.72

2.74

37.3

0.595

98.7

CL

Lean clay, low plasticity, very stiff

17

266

B5-S7

11.55 - 12.0

0.0

0.0

0.7

6.8

50.2

6.7

35.6

34.5

17.1

17.4

0.35

23.1

2.02

1.64

2.69

39.1

0.642

97.1

CL

Lean clay, low plasticity, medium stiff

267

B5-S8

13.00 - 13.50

0.0

0.0

0.2

8.2

64.4

8.3

18.9

27.5

13.4

14.1

0.91

26.3

2.00

1.58

2.72

41.9

0.720

99.2

CL

Lean clay, low plasticity, medium stiff

268

B5-T1

9.6 - 10.1

0.0

2.3

12.0

19.4

46.7

2.4

17.2 21.4(*) 11.7(*)

9.6

0.84

19.9

2.03

1.69

2.75

38.5

0.627

87.2

CL

Sandy lean clay, low plasticity, hard

40/50

269

B7-S5

8.55 - 9.00

16.2

2.16

1.85

2.65

30.2

0.432

99.6

270

B7-T2

10.10 - 10.90

3.2

6.2

14.7

18.8

44.9

1.7

0.36 14.2(*)

2.20

1.93

2.67

27.8

0.386

98.5

CL

Sandy lean clay, low plasticity, stiff

271

BB4-T1

7.50-8.50

0.0

0.0

11.7

10.9

63.0

6.4

8.0

21.6

2.08

1.71

2.74

37.7

0.604

97.9

ML

Silt with sand

272

BB6-S7

10.05 - 10.50

21.9

21.9

2.1

2.1

49.3

0.7

2.0

16.8

2.13

1.82

2.69

32.4

0.480

94.5

ML

Sandy silt with gravel, hard

41

273

BB6-S9

13.05 - 13.50

0.0

0.0

7.2

11.9

71.2

2.5

7.2

13.6(*)

ML

Silt with sand, very stiff

23

274

BB8-S10

16.05 - 16.50

0.0

3.0

0.1

3.2

48.9

8.8

36.0

40.8

20.4

20.4

0.84 37.6(*)

1.87

1.36

2.79

51.3

1.055

99.5

CL

Lean clay, intermediate plasticity, stiff

11

275

BB8-S6

8.55 - 9.00

0.0

5.3

1.3

29.0

37.9

4.7

21.9

29.1

14.7

14.4

<0 10.9(*)

1.99

1.79

2.73

34.5

0.527

56.6

CL

Sandy lean clay, low plasticity, stiff

14

276

BB8-S7

11.55 - 12.00

0.0

0.0

0.0

1.5

27.5

12.4

58.6 57.1(*) 26.8(*)

30.2

0.64 46.0(*)

1.77

1.21 2.84(*)

57.4

1.348

97.0

CH

Fat clay, high plasticity, medium stiff

277

BB8-S8

13.05 - 13.50

0.0

0.0

0.1

3.0

48.9

8.4

39.7 43.3(*)

16.4

26.9

0.75 36.6(*)

1.83

1.34

2.75

51.2

1.051

95.6

CL

Lean clay, intermediate plasticity, medium stiff

278

BB8-S9

14.55 - 15.00

0.0

0.0

0.0

1.4

52.6

11.7

34.3

41.8

21.3

20.6

0.61

33.9

1.92

1.43

2.79

48.7

0.950

99.4

CL

Lean clay, intermediate plasticity, stiff

10

279

BB8-T1

9.80-10.7

0.0

0.0

0.0

7.9

41.3

10.0

40.8

31.5

14.6

16.9

1.11

33.3

1.90

1.43

2.73

47.7

0.912

99.8

CL

Lean clay, low plasticity, stiff

280

BB9-S7

10.05 - 10.50

0.0

0.0

0.3

31.8

36.5

4.9

26.6

28.8

14.9

13.9

0.54

22.3

2.04

1.67

2.73

38.7

0.632

96.3

CL

Sandy lean clay, low plasticity, stiff

11

281

BB9-S8

13.05 - 13.50

0.0

0.0

0.2

5.0

47.5

8.4

38.9

35.7

22.4

13.3

0.63

30.8

1.87

1.43

2.73

47.6

0.907

92.6

CL

Lean clay, intermediate plasticity, medium stiff

6.5

282

BB9-S9

14.55 - 15.00

0.0

0.0

0.4

8.9

68.0

4.8

17.9

29.6

17.4

12.2

0.87

28.1

1.96

1.53

2.72

43.8

0.778

98.1

CL

Lean clay, low plasticity, medium stiff

5.5

283

BB9-T1

11.2 0- 12.10

0.0

0.0

0.6

2.0

29.9

13.5

54.0

41.5

21.6

19.9

0.93 40.0(*)

1.83

1.30

2.75

52.7

1.113

98.8

CL

Lean clay, intermediate plasticity, medium stiff

284

CC4-S8

13.05 - 13.50

0.0

0.0

0.0

0.0

78.7

5.8

15.5

35.9

19.9

16.0

0.75

1.88

1.43

2.71

47.2

0.893

96.8

CL

Lean clay, intermediate plasticity, very stiff

27.6

34.1

26.8

15.0

10.4 19.2(*) 11.4(*)

7.8

31.9

2.67

27

Ph lc - Appendix 5-22/26

SPT

CL

Lean clay with sand, low plasticity, medium stiff

32

2.73

CL

Lean clay with sand, intermediate plasticity, hard

30

18.5

2.67

CL

Lean clay, intermediate plasticity, hard

31

23.5

22.6

2.67

CL

Lean clay, intermediate plasticity, hard

33

12.9 24.8(*)

15.4

9.3

2.70

CL

Sandy lean clay, low plasticity, hard

32

5.7

15.1 21.2(*)

16.8

4.4

2.64

CL-ML

Silty clay with sand, low plasticity, hard

31

59.4

7.4

23.8 52.5(*) 31.7(*)

20.8

2.67

MH

Elastic silt, high plasticity, hard

33

7.9

29.2

10.5

38.9

41.3

24.2

17.1

0.33

29.9

1.95

1.50

2.72

44.9

0.814

99.8

CL

Lean clay with sand, intermediate plasticity, medium stiff

0.4

1.6

36.5

12.2

49.3

37.8

20.5

17.4

0.60

30.9

1.91

1.46

2.68

45.4

0.833

99.4

CL

Lean clay, intermediate plasticity, stiff

0.2

0.2

3.7

28.3

12.7

55.1

41.6

22.2

19.4

0.52

32.3

1.84

1.39

2.64

47.3

0.896

94.9

CL

Lean clay, intermediate plasticity, stiff

0.0

0.0

7.5

66.3

4.0

22.3

35.0

23.4

11.6

2.57(*)

CL

Lean clay, low plasticity, stiff

35.2

20.0

15.2

2.63(*)

22.4

29.1

18.9

10.2

0.42

23.2

2.01

1.63

2.64

38.3

0.620

98.7

CL

Lean clay, low plasticity, very stiff

21

3.4

23.1

35.2

20.8

14.4

0.44

27.2

1.89

1.48 2.63(*)

43.8

0.780

91.9

CL

Lean clay, intermediate plasticity, very stiff

22

45.2

1.4

16.4 23.8(*) 10.4(*)

13.4

CL

Sandy lean clay, low plasticity, very stiff

23

5.6

39.7

9.8

44.9

34.3

17.6

16.7

0.51

26.1

1.87

1.48

2.66

44.4

0.800

87.0

CL

Lean clay, low plasticity, stiff

1.3

8.6

58.0

5.8

26.4 25.0(*)

14.8

10.2

0.65

21.5

2.06

1.70

2.70

36.9

0.586

98.7

CL

Lean clay, low plasticity, medium stiff

0.0

3.0

12.1

30.1

13.0

41.8 45.2(*)

23.4

21.8

0.43

32.9

1.86

1.40

2.77

49.5

0.980

93.1

CL

Lean clay with sand, intermediate plasticity, very stiff

16

0.0

0.0

4.2

11.5

29.1

10.4

44.9 42.6(*)

20.4

22.2

0.45

30.3

1.92

1.47

2.68

45.2

0.825

98.5

CL

Lean clay with sand, intermediate plasticity, very stiff

14.55 - 15.00

0.0

4.8

0.9

3.3

33.1

10.3

47.6

42.0

14.7

27.3

0.43

26.5

1.95

1.54

2.76

44.1

0.790

92.4

CL

Lean clay, intermediate plasticity, very stiff

19

L7-S11

16.05 - 16.50

0.0

0.0

1.4

7.6

34.2

8.9

47.9 45.7(*)

23.5

22.1

0.14

26.6

1.99

1.57

2.78

43.5

0.771

96.0

CL

Lean clay, intermediate plasticity, very stiff

27

308

L7-T2

15.3 - 16.05

0.0

0.0

0.0

6.3

35.4

9.4

48.9 48.3(*) 24.8(*)

23.5

0.29

31.6

1.94

1.48 2.84(*)

47.9

0.920

97.7

CL

Lean clay, intermediate plasticity, very stiff

309

LL8-S15

22.05-22.50

2.9

8.8

4.3

25.8

37.0

4.1

17.1

19.6

2.13

1.78

2.75

35.2

0.543

99.2 CL-ML

Sandy silty clay, very stiff

10.1

47.2

7.9

28.1

25.1

1.97

1.58

2.70

41.6

0.711

95.3

0.21

0.06

285

D2-S2

2.55-3.0

0.0

0.0

4.4

3.8

55.6

16.5

19.7

286

D4-S4

5.55 - 6.0

0.0

0.0

3.7

9.1

67.6

10.2

9.5

287

D5-S2

2.55 - 3.0

0.0

0.0

9.8

16.3

54.1

10.9

8.9

28.3

18.6

9.8

288

L1-S11

16.05 - 16.50

1.7

3.6

9.5

7.5

41.3

5.4

31.1

35.2

18.4

16.8

289

L1-S12

17.55 - 18.00

0.0

0.0

1.1

5.5

35.5

11.7

46.1

37.0

18.5

290

L1-S13

19.05 - 19.50

0.0

0.0

1.2

6.9

21.0

17.2

53.7 46.1(*)

291

L1-S14

20.55 - 21.00

3.6

17.3

14.5

10.8

39.8

1.1

292

L1-S15

22.05 - 22.50

0.0

0.0

2.9

20.8

55.5

293

L1-S16

23.55 - 24.00

0.0

0.0

0.0

9.4

294

L2-S12

17.55 - 18.00

1.9

8.4

3.2

295

L2-S13

19.05 - 19.50

0.0

0.0

296

L2-S14

20.55 - 21.00

0.0

297

L2-S15

22.05 - 22.50

0.0

298

L2-S16

23.55 - 24.00

299

L2-S17

25.05 - 25.50

0.0

0.0

0.1

10.4

62.5

4.7

300

L2-S18

26.55 - 27.00

0.0

0.0

0.4

6.0

67.2

301

L2-S19

28.05 - 28.50

0.0

5.6

11.2

20.1

302

L2-T1

18.00 - 19.00

0.0

0.0

0.0

303

L3-S7

10.05 - 10.50

0.0

0.0

304

L4-10

14.55-15.00

0.0

305

L4-T1

15.3-16.05

306

L7-S10

307

Trung bnh - Average

1.1

2.0

3.6

H.s b.i - Coe. Of Var.

37.6

22.7

34.2

18.8

0.15

0.16

14.9

15.4

0.44

<0

H s rng
- Void ratio

88.5

<0.002

24

0.005-0.002

0.075-0.005

Silty clay, very stiff

0.425-0.075

85.0 CL-ML

2.0-0.4250

26

4.75-2.0

19.0-4.75

Lean clay, intermediate plasticity, very stiff

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

st - Liquidity

DT t Wet density, g/cm 3

Tnh cht vt l - Physical Properties


m Moisture Cont.,%

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

29.2

1.99

1.54 2.83(*)

45.7

0.840

98.6

27.6

1.84

1.44

2.71

46.8

0.878

16.3

2.10

1.81

2.72

33.4

0.501

2.66

0.41

CL

M t
Description

15

0.01

Gtr nh nht - Min Value

0.7

0.2

0.1

1.4

21.0

0.7

2.0

25.2

13.4

11.8

0.24

16.2

1.70

1.46

2.63

0.800

Gtr ln nht - Max value

23.5

21.9

19.4

42.0

78.7

18.3

58.6

42.0

24.2

17.8

0.54

33.9

2.29

1.71

2.79

0.632

22.7

19.1

3.6

<0

18.3

2.15

1.78

2.70

34.0

0.515

95.6

ML

Sandy silt, low plasticity, hard

14/100

310

A8-S10

17.05-17.50

0.0

0.0

0.0

35.5

45.0

2.5

17.0

311

AA7-S6

10.05 - 10.50

0.0

2.3

6.5

20.9

56.8

4.0

9.4

17.3

2.14

1.82

2.71

32.8

0.487

96.0

ML

Sandy silt, hard

73

312

AA7-S7

11.55 - 12.00

0.0

0.0

5.9

20.9

59.6

4.5

9.1

19.5

2.12

1.77

2.79

36.5

0.574

94.6

ML

Silt with sand, hard

107

313

B10-S9

13.05 - 13.50

0.0

0.1

7.9

16.7

50.8

7.5

17.2

29.6(*)

1.87

1.44

2.6(*)

44.5

0.802

95.9 CL-ML

Silty clay with sand, hard

56

314

B11-S7

10.05 - 10.50

14.2

8.0

5.3

9.2

49.6

5.7

8.0

36.5

24.3

12.3

<0

16.6

2.08

1.78

2.72

34.4

0.525

86.0

CL

Sandy lean clay, intermediate plasticity, hard

62

315

B11-S8

11.55 - 12.00

0.0

0.0

7.0

11.9

56.4

7.6

17.2

36.8

24.1

12.7

<0

16.9

1.95

1.67 2.66(*)

37.1

0.590

76.0

CL

Lean clay with sand, intermediate plasticity, hard

45

316

B13-S6

10.05 - 10.50

0.0

0.0

17.2

12.2

54.5

7.4

8.8

28.8

19.1

9.7

0.31

22.1

2.05

1.68

2.68

37.4

0.597

99.4

CL

Lean clay with sand, low plasticity, hard

37

317

B13-S7

11.55 - 12.0

2.7

5.4

12.7

13.4

49.3

6.0

10.6

28.6

18.8

9.8

<0 14.9(*)

2.18

1.89

2.68

29.5

0.419

95.6

CL

Sandy lean clay, low plasticity, hard

49

318

B13-S8

13.05 - 13.47

0.0

0.0

21.7

23.3

44.5

3.8

6.7

14.8(*)

2.14

1.87

2.69

30.6

0.440

90.7 CL-ML

Sandy silty clay, hard

110

Ph lc - Appendix 5-23/26

SPT

Lean clay with sand, hard

92

92.7

CL

Lean clay, low plasticity, hard

62

99.3

ML

Silt with sand, hard

63

ML

Silt, hard

63

95.0

ML

Silt with sand, hard

75

0.615

90.5

CL

Lean clay with sand, hard

119.25

36.6

0.578

89.3

CL

Lean clay with sand, hard

130

36.7

0.579

99.7

CL

Lean clay with sand, hard

138.667

CL

Lean clay with sand, hard

79

99.0

CL

Lean clay, hard

76

95.5

CL

Lean clay, hard

232

ML

Sandy silt, hard

188.5

ML

Silt with sand, hard

ML

Silt with sand, hard

202

83.0

SM

Silty Sand

56

0.558

96.7

CL

Sandy lean clay, low plasticity, hard

67

36.0

0.563

98.5

CL

Lean clay with sand, hard

2.75

35.0

0.539

94.3

CL

Lean clay with sand, hard

1.66

2.76

39.8

0.660

97.1

ML

Silt, hard

2.08

1.68

2.78

39.6

0.657

98.9

ML

Silt with sand, hard

16.0

2.08

1.79

2.78

35.7

0.555

80.1

CL

Sandy lean clay, low plasticity, hard

7.1

22.2

2.05

1.68

2.80

40.0

0.668

93.1

ML

Silt with sand, hard

77

2.0

6.2

16.1

2.14

1.84

2.72

32.3

0.477

91.6

ML

Lean clay, hard

93

50.7

3.7

3.7

23.3

2.03

1.65

2.76

40.2

0.672

95.7

ML

Sandy silt, hard

600

16.6

56.5

4.6

7.6

10.2

16.2

58.9

4.6

10.2

9.6

17.7

17.3

41.5

3.1

6.4

0.0

3.1

16.8

19.8

49.7

3.0

7.6

29.1

17.8

11.2

0.75

26.3

1.96

1.55 2.66(*)

41.8

0.718

97.4

4.05-4.5

0.0

0.0

10.0

24.5

47.3

8.7

9.5

31.0

16.6

14.4

0.08

17.8

2.15

1.82

2.74

33.5

0.504

D3-S2

2.55 - 2.93

0.0

0.0

8.1

23.7

51.9

5.3

11.0

27.2

19.5

7.7

<0

15.0

2.13

1.85 2.83(*)

34.5

352

D4-S5

7.05 - 7.50

0.0

0.0

10.7

10.1

58.9

10.5

9.9

37.5 26.2(*)

11.3

<0

19.9

2.13

1.77 2.84(*)

37.7

353

L1-S17

25.05 - 25.34

0.0

0.0

1.2

26.8

49.0

5.3

17.7

2.62(*)

354

L2-S20

29.55 - 30.00

0.0

7.4

8.4

19.7

42.4

1.6

20.6

2.64(*)

355

L3-S11

16.05 - 16.50

0.0

0.0

1.6

10.6

57.3

21.5

9.0

38.1

24.4

13.6

356

L3-S12

17.55 - 18.00

0.0

7.7

13.2

7.6

53.5

11.4

6.5

34.2

24.3

9.9

<0

17.2

55.7

5.7

9.7

31.4

19.7

11.6

0.07

319

B2-S10

16.80 - 17.12

0.0

3.4

12.6

19.2

54.5

1.9

8.4

320

B7- S7

12.50 - 12.90

0.0

0.0

2.4

28.5

56.3

3.7

9.2

321

BB3-S4

5.55-6.0

0.0

0.0

0.0

1.5

84.0

2.5

322

BB4-S10

14.55-15.00

0.0

0.0

4.9

18.3

59.0

323

BB4-S11

16.05-16.50

0.0

0.0

2.9

9.8

324

BB4-S12

17.55-18.00

0.0

0.0

7.6

325

BB4-S13

19.05-19.50

0.0

0.0

326

BB4-S14

20.55-21.00

0.0

327

BB4-S17

25.05-26.50

328

BB4-S20

329

H s rng
- Void ratio

CL

<0.002

75

0.005-0.002

0.075-0.005

Silt, hard

0.425-0.075

538

2.0-0.4250

4.75-2.0

>50

19.0-4.75

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

st - Liquidity

DT t Wet density, g/cm 3

Tnh cht vt l - Physical Properties


m Moisture Cont.,%

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

17.1

2.11

1.80 2.63(*)

31.6

0.461

97.3

20.4

2.08

1.73

2.69

35.8

0.557

98.7

12.0

20.8

2.07

1.71 2.66(*)

35.7

0.555

99.7

ML

7.1

10.7

20.5

2.11

1.75

2.77

36.7

0.581

97.6

70.8

5.0

11.5

23.4

2.03

1.64

2.80

41.5

0.708

18.1

59.3

6.1

9.0

24.5

2.07

1.66

2.81

40.9

0.692

1.5

8.9

71.0

8.9

9.7

22.1

0.0

5.9

17.7

67.1

3.9

5.4

19.9

2.12

1.77

2.81

37.1

0.590

0.0

0.0

9.3

15.8

55.3

10.7

9.0

20.0

2.06

1.72

2.78

38.1

29.55-29.95

0.0

0.0

7.6

19.1

60.1

5.2

8.1

18.4

2.10

1.78

2.81

BB4-S21

31.05-31.44

0.0

0.0

4.5

19.3

61.7

7.2

7.3

20.7

2.13

1.77

2.80

330

BB4-S22

32.55-33.00

0.0

0.0

12.2

15.8

54.8

8.2

9.0

25.3

331

BB4-S23

34.05-34.50

0.0

0.0

0.7

3.7

55.7

16.3

23.6

30.1(*)

2.04

1.56 2.97(*)

47.5

0.903

332

BB4-S24

35.55-35.89

0.0

0.0

6.0

8.3

71.4

3.7

10.7

18.5

2.13

1.80

34.9

0.536

333

BB4-S26

38.55-38.91

13.8

13.2

5.4

9.7

49.7

2.1

6.2

23.2

334

BB4-S28

41.55-41.63

0.0

0.0

11.7

16.7

59.9

4.0

7.8

23.8

335

BB4-S30

44.55-44.9

0.0

0.0

25.6

13.9

51.6

2.5

6.4

17.7

336

BB4-S6

8.55-9.00

0.0

0.0

8.5

75.4

15.4

0.0

0.6

25.5

1.85

1.47

2.68

45.2

0.826

337

BB4-S7

10.05-10.50

0.0

0.0

23.2

24.0

44.0

1.7

7.1

19.4

2.13

1.79

2.79

35.8

338

BB4-T16

30.0-31.0

0.0

0.0

6.7

9.7

63.3

9.4

10.9

19.9

2.13

1.78

2.78

339

BB4-T17

31.50-32.50

0.0

0.0

14.3

14.4

56.6

4.4

10.3

18.5

2.12

1.79

340

BB4-T2

9.00-10.00

0.0

0.0

4.6

8.1

67.9

9.1

10.4

23.3

2.05

341

BB4-T3

10.50-11.50

0.0

0.0

9.0

13.3

64.4

6.5

6.7

23.4

342

BB4-T7

16.50-17.50

0.0

0.0

15.4

21.7

51.2

4.7

7.0

343

BB8-S11

16.80 - 17.25

0.0

4.0

8.2

11.1

68.7

0.9

344

BB9-S10

16.05 - 16.50

0.0

10.0

3.1

16.8

61.9

345

C2-S9

13.05 - 13.25

8.6

6.5

12.5

14.3

346

CC3-S10

14.55 - 15.00

0.0

0.0

14.7

347

CC3-S9

13.05 - 13.50

0.0

0.0

348

CC4-S10

15.9-16.19

4.4

349

CC4-S9

14.55 - 15.00

350

D2-S3

351

Trung bnh - Average

0.9

1.7

9.0

30.1

26.5

28.0

30.5

32.0

16.6

16.2

17.9

17.4

13.5

10.3

10.1

13.1

0.28

0.70

0.14

<0

2.80

2.81(*)

2.76
2.74

2.06

1.66

2.80

40.7

0.686

97.2

2.75

CL

M t
Description

Lean clay, hard

19.6

12.3

0.44

25.1

1.98

1.58 2.66(*)

40.5

0.681

97.9

CL

Sandy lean clay, low plasticity, hard

50

35.5 14.7(*)

20.9

1.03 36.2(*)

1.87

1.37

50.7

1.029

97.8

CL

Lean clay with sand, intermediate plasticity, hard

34

Sandy silty clay, hard

14/100

CL

Sandy lean clay, low plasticity, hard

49

96.7

CL

Sandy lean clay, low plasticity, hard

193

0.527

80.5

CL

Sandy lean clay, low plasticity, hard

95

0.606

93.3

ML

Silt with sand, intermediate plasticity, hard

132.143

CL-ML

Silty clay with sand, hard

214.3

CL-ML

Sandy silty clay, hard

214.3

21.2

2.78
2.71

CL-ML

1.95

1.49 2.85(*)

47.8

0.914

96.1

CL

Lean clay, intermediate plasticity, hard

38

20.5

2.15

1.78 2.86(*)

37.7

0.606

96.7

ML

Silt with sand, low plasticity, hard

91

20.5

2.07

1.72

37.7

0.605

93.4

0.47 30.8(*)

2.76

Ph lc - Appendix 5-24/26

SPT

0.2

0.8

18.8

2.02

1.70

2.67

36.2

0.568

88.5

SM

Silty Sand, medium dense state

5b

19

358

A2-S11

16.05 - 16.50

0.0

0.0

17.0

65.9

15.0

0.3

1.9

14.4

2.17

1.90

2.66

28.5

0.398

96.2

SM

Silty Sand, medium dense state

5b

27

359

A2-S12

17.55 - 18.00

0.0

0.5

19.7

79.4

0.3

0.1

0.0

13.7

2.19

1.93

2.64

27.0

0.369

97.9

SP

Poorly-graded sand, medium dense state

5b

28

360

A6-S10

16.05 - 16.50

0.0

0.0

25.4

52.2

20.6

0.5

1.4

19.8

2.02

1.68

2.73

38.4

0.624

86.4

SM

Silty Sand, loose state

5b

361

A6-S11

17.55 - 18.00

0.0

1.0

23.8

51.2

22.1

0.3

1.7

24.6(*)

2.00

1.61

2.67

39.6

0.657

99.8

SM

Silty Sand, medium dense state

5b

14

362

A6-S12

19.05 - 19.50

3.7

17.0

30.7

15.0

31.2

0.0

2.5

17.0

2.10

1.80

2.72

33.8

0.510

90.6

SM

Silty Sand, medium dense state

5b

34

363

A6-S9

14.55 - 15.00

0.0

0.0

28.2

44.6

24.0

0.3

3.0

17.0

2.13

1.82

2.71

32.9

0.490

93.8

SM

Silty Sand, loose state

5b

364

A7-S6

8.55 - 9.00

17.5

14.0

25.1

12.7

28.6

0.4

1.7

15.0

2.17

1.89

2.64

28.5

0.398

99.5

SM

Silty sand with gravel, loose state

5b

365

A7-S7

10.05 - 10.50

0.0

4.5

26.3

24.2

37.9

2.1

5.1

23.3(*)

2.04

1.65

2.71

39.1

0.641

98.4

SM

Silty Sand, medium dense state

5b

23

366

A7-S8

11.55 - 12.00

23.1(*)

2.01

1.63

2.64

38.2

0.617

98.9

5b

110

367

A9-S13

20.00 - 20.23

2.9

15.6

25.1

17.2

33.0

1.4

4.8

14.5

2.19

1.91

2.70

29.2

0.413

94.8

SM

Silty Sand, very dense state

5b

243.75

368

D5-S3

4.05 - 4.50

32.0

7.5

6.7

7.8

35.9

4.7

5.4

18.8

2.13

1.79 2.78(*)

35.5

0.550

94.9

GC

Clayey gravel with sand, low plasticity, dense state

5b

47

369

L4-S12

17.55-18.00

4.9

15.3

6.8

40.7

23.7

1.6

7.0

14.0

2.18

1.91

2.66

28.1

0.391

95.1 SC-SM

Silty, clayey sand, loose state

5b

370

L4-S13

19.05-19.50

1.3

8.9

11.4

46.7

25.4

1.5

4.8

16.5

2.17

1.87

2.71

30.9

0.447

99.8 SC-SM

Silty, clayey sand, loose state

5b

371

L4-T2

18.3 - 19.05

0.0

0.0

7.0

54.0

30.7

0.8

7.5

18.9

11.4

7.5

0.70

16.6

2.10

1.80

2.72

33.9

0.512

88.4

Clayey sand, low plasticity, loose state

5b

37.6

24.3

1.0

3.4

24.9

15.1

9.8

0.12

16.3

2.11

1.81

2.68

32.4

0.480

91.3

0.13

0.03

H.s b.i - Coe. Of Var.

0.14

0.15

0.14

0.04

H s rng
- Void ratio

11.1

<0.002

15.2

0.005-0.002

72.6

0.075-0.005

0.0

0.425-0.075

0.0

2.0-0.4250

11.55 - 12.00

4.75-2.0

A1-S7

19.0-4.75

357

75-19

Lp- Layer

K hiu - Symbol

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

st - Liquidity

DT t Wet density, g/cm 3

Tnh cht vt l - Physical Properties


m Moisture Cont.,%

Gii hn Atterberg
St-Clay

Ch s do
- Plasticity Index

Bi-Silt

Gii hn do
- Plastic Limits, %

Ct-Sand

Gii hn chy
- Liquid Limits, %

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

0.02

Gtr nh nht - Min Value

2.7

0.1

0.7

1.5

15.4

0.9

0.6

22.7

16.2

6.5

<0

15.0

1.85

1.61

2.68

0.670

Gtr ln nht - Max value

14.2

13.2

25.6

75.4

84.0

21.5

23.6

38.1

24.4

13.6

0.14

26.3

2.18

1.72

2.81

0.633

Trung bnh - Average

4.4

6.0

23.3

30.9

18.9

12.0

<0

H.s b.i - Coe. Of Var.

M t
Description

SC

5b

0.01

Gtr nh nht - Min Value

1.3

0.5

6.7

7.8

0.3

0.0

0.8

18.9

11.4

7.5

0.31

13.7

2.00

1.76

2.64

0.496

Gtr ln nht - Max value

32.0

17.0

72.6

79.4

37.9

4.7

7.5

30.9

18.9

12.0

0.07

19.8

2.19

1.83

2.73

0.490

372

A16-S11

17.55 - 18.00

0.0

29.7

13.2

18.7

16.5

21.2

0.1

0.5

14.4

2.22

1.94

2.70

28.2

0.392

99.3

SM

Silty sand with gravel, dense state

L1

37

373

A16-S12

19.05 - 19.50

0.0

15.4

22.4

21.9

11.6

27.5

0.2

1.0

12.3

2.22

1.98

2.70

26.7

0.364

91.3

SM

Silty sand with gravel, medium dense state

L1

25

374

A16-S13

20.55 - 21.00

0.0

22.5

15.0

20.5

14.6

26.4

0.2

0.9

9.2

2.27

2.08

2.75

24.4

0.323

78.2

SM

Silty sand with gravel, very dense state

L1

64

375

A1-S8

13.05 - 13.50

0.0

12.1

16.2

31.0

12.2

28.0

0.1

0.4

14.5

2.17

1.89

2.64

28.3

0.394

96.7

SM

Silty Sand, dense state

L1

36

376

A1-S9

14.55 - 14.93

5.0

17.0

25.3

13.6

6.5

31.9

0.2

0.5

10.4

2.29

2.07

2.67

22.5

0.290

95.4

SM

Silty sand with gravel, dense state

L1

50

377

A4-S10

14.55 - 15.00

24.2

14.7

12.1

8.3

11.8

27.7

0.1

1.1

6.8(*)

2.68

GM

Silty gravel with sand, very dense state

L1

97

378

A4-S11

17.55 - 18.00

41.6

17.9

11.5

2.1

4.6

21.3

0.2

0.9

8.4(*)

2.68

GM

Silty gravel with sand, very dense state

L1

63

379

A4-S12

19.05 - 19.50

0.0

28.6

8.6

3.9

6.2

45.6

1.6

5.4

17.5

2.67

ML

Gravelly silt with sand, hard

L1

63

380

A4-S8

13.05 - 13.50

26.5

23.3

17.6

4.6

8.2

19.3

0.1

0.4

7.8(*)

2.29

2.12

2.69

21.1

0.268

78.3

GM

Silty gravel with sand, very dense state

L1

54

381

A5-S10

16.05 - 16.50

0.0

3.2

6.9

7.9

28.8

45.6

1.5

6.1

12.2

2.20

1.96

2.71

27.6

0.381

86.7

SM

Silty sand with gravel, hard

L1

123

382

A5-S7

11.55 - 11.95

0.0

29.8

13.6

12.9

11.8

29.4

0.8

1.8

14.8

2.22

1.94

2.76

29.7

0.422

96.8

SM

Silty sand with gravel, very dense state

L1

166.571

383

A5-S8

13.05 - 13.50

0.0

10.5

0.4

20.4

16.6

38.8

3.2

10.1

17.6

2.16

1.84

2.75

33.1

0.494

98.0

ML

Sandy silt, hard

L1

73

384

A5-S9

14.55 - 15.00

0.0

21.9

18.1

13.5

9.8

33.6

0.5

2.6

14.3

2.74

SM

Silty sand with gravel, very dense state

L1

92

385

A6-S13

20.55 - 21.00

0.0

0.0

18.1

35.7

22.9

21.9

0.2

1.1

23.8(*)

2.71

SM

Silty Sand, very dense state

L1

92

386

A6-S14

22.05 - 22.50

0.0

0.0

13.4

45.2

19.3

20.9

0.3

0.9

8.4(*)

2.68

SM

Silty Sand, very dense state

L1

84

Ph lc - Appendix 5-25/26

387

A6-S16

25.50 - 25.80

0.0

0.0

0.0

1.3

38.7

53.2

2.2

388

A7-S4

5.55 - 6.00

0.0

29.7

5.9

4.0

4.5

37.1

3.8

389

A7-S5

7.05 - 7.50

19.5

42.1

16.5

3.4

5.2

13.3

0.0

0.1

6.7(*)

390

A9-S12

17.00 - 17.45

0.0

16.9

24.1

14.9

8.2

30.5

1.0

4.5

12.7

2.22

1.97

2.63

25.2

0.337

391

B10-S8

11.55 - 12.00

0.0

24.4

17.7

3.5

8.0

40.4

1.2

4.8

16.4

2.13

1.83

2.62

30.1

392

B11-S10

14.55 - 15.00

0.0

12.1

14.7

2.8

9.1

48.2

4.5

8.7

19.1

2.02

1.70

2.70

393

B11-S11

16.05 - 16.50

0.0

0.0

2.1

9.9

13.8

51.3

6.0

0.20 30.5(*)

1.92

1.47

394

B11-S12

17.55 - 18.00

0.0

10.5

3.5

4.6

15.3

56.1

4.1

6.0

16.3

2.15

395

B11-S9

13.05 - 13.50

0.0

23.7

7.5

17.8

10.9

34.4

1.9

3.7

23.9(*)

1.97

396

B12-S7

11.55 - 12.00

0.0

2.1

0.6

16.1

42.6

33.7

1.1

3.9

397

B12-S8

13.05 - 13.50

0.0

41.2

16.3

8.2

5.4

26.2

0.3

2.5

398

B14-S1

0.70 - 1.04

0.0

12.1

24.5

16.4

0.0

45.5

0.4

1.1

12.4

2.25

2.00

2.68

25.5

0.342

399

B14-S2

4.00 - 4.13

0.0

4.0

14.5

21.9

22.2

33.9

1.2

2.3

14.3

2.20

1.93

2.70

28.5

400

B16-S3

4.05 - 4.19

0.0

0.0

4.6

15.2

14.7

56.6

3.7

5.2

17.0

2.14

1.83

2.69

32.1

401

B1-S13

19.05 - 19.50

18.9

11.6

17.4

15.6

3.9

31.7

0.1

0.8

10.5

402

B1-S6

8.55 - 9.00

19.9

23.1

10.9

7.7

10.1

27.3

0.1

0.9

9.7

2.30

2.10

2.64

20.5

0.258

403

B1-S7

10.05 - 10.50

25.8

12.0

11.3

26.9

22.4

0.0

1.6

10.5

2.28

2.06

2.64

21.9

404

B1-S8

11.55 - 12.00

22.2

11.5

6.8

8.5

22.0

0.0

0.5

10.6

2.27

2.05

2.63

405

BB6-S10

14.55 - 15.00

41.3

18.4

5.9

9.0

24.2

0.3

0.9

16.0

2.11

1.82

2.75

406

BB6-S11

16.05 - 16.50

40.4

22.5

5.4

7.5

23.1

0.0

1.2

9.5

407

BB6-S12

17.55 - 18.00

13.6

17.3

21.1

5.2

8.1

32.9

0.3

1.5

16.9

2.12

1.81

2.70

33.1

0.494

408

BB6-S13

19.05 - 19.50

11.0

23.6

21.2

6.6

8.5

27.4

0.5

1.4

16.8

1.96

1.67

2.71

38.5

0.625

409

BB6-S14

20.55 - 21.00

33.7

18.2

5.1

8.4

33.1

0.3

1.2

9.7

410

BB6-S15

22.05 - 22.50

40.5

12.9

1.7

4.6

16.9

0.0

0.6

12.0

411

C4-S10

15.00 - 15.21

1.9

22.1

22.2

20.7

30.3

0.7

2.2

18.5

2.11

1.78

2.70

33.9

0.514

97.0

412

C4-S9

13.05 - 13.50

0.0

27.8

13.8

46.0

2.1

10.3

19.9

2.07

1.73

2.65

34.7

0.531

413

D1-S7

8.55 - 9.00

0.0

22.4

19.7

10.3

12.5

32.0

1.2

1.9

20.2

2.04

1.70

2.70

37.1

414

D1-S8

9.60 - 10.00

0.0

0.8

14.6

29.5

24.0

28.4

1.0

1.7

11.2

2.29

2.06

2.74

415

D1-S9

24.50 - 24.86

0.0

11.6

18.2

22.2

17.1

28.7

0.7

1.4

10.6

2.33

2.11

2.76

416

D5-S4

5.55 - 6.00

0.0

42.1

8.9

5.2

9.1

29.6

2.5

2.6

35.6

22.0

13.6

<0

15.3

417

L3-S10

14.55 - 15.00

10.5

44.5

9.3

2.9

6.4

20.1

2.5

3.8

30.5

20.4

10.1

<0

15.4

2.22

1.93 2.82(*)

31.5

0.460

418

L3-S8

11.55 - 12.00

0.0

19.8

19.0

9.3

9.5

29.9

2.2

10.3 21.4(*) 13.2(*)

8.2

0.68

18.8

2.11

1.78

2.70

34.0

419

L3-S9

13.05 - 13.50

23.3

22.3

1.5

1.1

7.4

33.3

4.8

6.2

0.39 20.8(*)

2.10

1.74

2.73

420

L4-S14

20.55-21.00

0.0

4.3

19.8

24.6

26.0

24.4

0.3

0.7

8.7(*)

2.32

2.14

2.67

421

L5-S11

16.05 - 16.50

0.0

12.2

28.7

28.7

6.0

24.3

0.2

0.0

9.7

13.0

31.8

1.2

3.3

Trung bnh - Average

28.4

22.8

5.9

18.9

14.1

13.1

4.6

16.5

15.0 41.5(*)

21.9

19.6

36.0

23.8

12.2

16.8 47.6(*)

26.1

21.6

23.9

9.2

H.s b.i - Coe. Of Var.

33.1

28.9

15.8

32.8

22.0

0.10

0.15

13.0

10.8

2.18

1.02 41.9(*) 1.75(*)

<0

<0

<0

1.87

99.2

ML

Sandy silt, hard

L1

1.23 2.58(*)

52.3

1.095

98.5

CL

Gravelly lean clay, intermediate plasticity, very stiff

L1

25

GM

Silty gravel with sand, very dense state

L1

60

99.2

SM

Silty sand with gravel, dense state

L1

34

0.431

99.6

SM

Silty sand with gravel, dense state

L1

41

37.1

0.591

87.5

CL

Sandy lean clay, intermediate plasticity, hard

L1

43

2.74

46.3

0.861

96.8

CL

Lean clay with sand, intermediate plasticity, very stiff

L1

27

1.85

2.74

32.5

0.482

92.5

ML

Sandy silt, low plasticity, hard

L1

64

1.59

2.66

40.3

0.675

94.3

SM

Silty sand with gravel, dense state

L1

39

2.65

SM

Silty Sand, very dense state

L1

63

2.65

GM

Silty gravel with sand, dense state

L1

41

97.1

SM

Silty Sand, very dense state

L1

>50

0.399

96.5

SM

Silty Sand, very dense state

L1

>50

0.472

96.8

ML

Sandy silt, hard

L1

>50

SM

Silty sand with gravel, dense state

L1

43

99.7

GM

Silty gravel with sand, very dense state

L1

106

0.280

99.2

SM

Silty sand with gravel, very dense state

L1

104

21.9

0.281

99.3

GM

Silty gravel with sand, medium dense state

L1

28

33.9

0.512

86.1

GM

Silty gravel with sand, medium dense state

L1

18

GM

Silty gravel with sand, medium dense state

L1

25

92.5

SM

Silty sand with gravel, dense state

L1

38

72.9

SM

Silty sand with gravel, loose state

L1

2.69

GM

Silty gravel with sand, medium dense state

L1

12

2.69

GM

Silty gravel with sand, very dense state

L1

126.5

SM

Silty Sand, very dense state

L1

200

99.2 CL-ML

Sandy silty clay, hard

L1

64

0.589

92.5

SM

Silty sand with gravel, dense state

L1

50

24.8

0.329

92.9

SM

Silty Sand, very dense state

L1

301.6

23.5

0.308

94.7

SM

Silty Sand, very dense state

L1

145

GC

Clayey gravel with sand, intermediate plasticity, very dense state

L1

119

94.5

GC

Clayey gravel with sand, low plasticity, very dense state

L1

81

0.515

98.3

SC

Clayey sand with gravel, low plasticity, dense state

L1

34

36.4

0.572

99.6

GC

Clayey gravel, low plasticity, very dense state

L1

106

19.7

0.246

94.2

SM

Silty Sand, very dense state

L1

101

SM

Silty Sand, very dense state

L1

120

2.74

2.69

0.05

SPT

0.453

2.72

0.24

Lp- Layer

31.2

2.64

2.17

M t
Description

2.72

2.64

14.2

K hiu - Symbol

bo ha Deg. of Saturation

H s rng
- Void ratio

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

Tnh cht vt l - Physical Properties


st - Liquidity

Ch s do
- Plasticity Index

Gii hn chy
- Liquid Limits, %

<0.002

Gii hn do
- Plastic Limits, %

Gii hn Atterberg
St-Clay

0.005-0.002

0.075-0.005

Bi-Silt
0.425-0.075

2.0-0.4250

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

1.90

2.69

29.3

0.415

0.01

Gtr nh nht - Min Value

5.0

0.8

0.4

1.1

3.9

13.3

0.0

0.1

28.9

15.8

13.0

<0

9.2

1.92

1.76

2.62

0.489

Gtr ln nht - Max value

41.6

44.5

28.7

45.2

42.6

56.6

6.0

16.8

36.0

26.1

9.9

<0

20.2

2.33

1.94

2.76

0.422

91.8

L1

Ph lc - Appendix 5-26/26

Lp- Layer

SPT

Poorly-graded sand with silt, medium dense state

TKC

17

<0 12.1(*)

2.19

1.96

2.65

26.1

0.353

90.6

Clayey sand with gravel, intermediate plasticity, medium dense sta

TKC

17

7.8

25.1

1.90

1.52

2.71

43.8

0.780

87.0 SC-SM

Silty, clayey sand, loose state

TKC

2.9

11.5

26.4

1.99

1.57

2.70

41.9

0.722

98.9 SC-SM

Silty, clayey sand, medium dense state

TKC

13

2.1

7.7

25.5

2.00

1.60

2.68

40.4

0.677

0.03

0.06

89.6

8.8

0.1

0.6

423

B4-S5

7.05 - 7.50

23.4

16.1

10.6

6.1

30.6

2.5

10.8

424

B5-S9

14.55 - 15.00

0.0

0.0

1.3

53.6

34.3

3.0

425

C5-S3

4.05 - 4.50

0.0

0.0

18.4

38.1

29.1

46.8

25.7

H.s b.i - Coe. Of Var.

35.6

18.1

17.4

23.4

16.1

1.0

6.1

8.8

0.1

0.6

25.0

1.90

1.52

2.65

0.746

Gtr ln nht - Max value

23.4

16.1

18.4

89.6

34.3

3.0

11.5

26.4

2.19

1.73

2.71

0.561

2.0

22.3

0.8

4.1

32.50 - 32.83

38.6

26.4

5.8

SC

M t
Description

TKC

100.0

0.01

Gtr nh nht - Min Value

A9-S14

K hiu - Symbol

93.4 SP-SM

1.0

H s rng
- Void ratio
0.710

0.0

426

bo ha Deg. of Saturation

rng - Porosity, %

T trng Special Gravity

DT kh Dry density, g/cm3

DT t Wet density, g/cm 3

m Moisture Cont.,%

st - Liquidity

41.5

0.0

7.8

Ch s do
- Plasticity Index

2.65

8.55 - 9.00(1)

4.0

Gii hn chy
- Liquid Limits, %

1.55

<0.002

1.94

A10-S6-1

5.8

Tnh cht vt l - Physical Properties

25.0

422

Trung bnh - Average

Gii hn do
- Plastic Limits, %

Gii hn Atterberg
St-Clay

0.005-0.002

0.075-0.005

Bi-Silt
0.425-0.075

2.0-0.4250

Ct-Sand

4.75-2.0

19.0-4.75

75-19

su mu, m
Depth, m

S hiu mu
Sample No.

S th t - No.

Thnh phn ht - Grain Size Distribution, %


Sn-Gravel

2.65

SM

Silty Sand, very dense state

6a

186

APPENDIX 6.1: OEDOMETER TEST RESULTS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Ph lc - Appendix 6.1

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

BNG TNG HP NN C KT CA CC LP T - KHU VC DI NC


SUMMARY OF OEDO-CONSOLIDATION TEST RESULTS OF SOIL LAYERS - OFFSHORE AREA

AL c hiu thng ng, kG/cm


Effective vertical pressure

p lc tin c kt
Pre. Consol. Press. Pmax, kG/cm2

Ch s n Cs
Swelling index Cs

Ch s nn li Cr
Recompression index Cr

H s ln t bin C- Coefficient of secondary compression Tng ng vi


cp AL - Correspond to the Load Pressure, kG/cm

Cc thng s c kt - Consolidation parameters

0.925

0.938

0.936

0.926

0.185

0.017

0.010

0.52 1.86E-03 1.55E-03 1.30E-03 7.51E-04 5.96E-04 6.89E-04

1.93E-03 1.13E-03 5.93E-04 5.83E-04 3.25E-03 3.37E-03

0.84

0.088

0.008

0.005

1.00

3.37E-03

2.111

0.966

0.862

0.943

0.900

0.869

0.421

0.091

0.061

0.66 2.35E-03 9.46E-04 1.45E-03 7.90E-04 8.43E-04 9.27E-04

1.03E-03 3.13E-03 5.21E-03 9.21E-03 1.23E-02 1.05E-02

1.01

0.185

0.040

0.027

1.00

1.23E-02

2.654

B2-T2

16.00 - 16.80

0.552

1.240

0.549

0.547

0.544

0.539

0.528

0.504

0.943

0.520

0.900

0.512

0.869

0.507

0.078

0.007

0.011

2.73 2.35E-03 1.58E-03 1.56E-03 2.33E-03 4.20E-03 4.95E-03 6.52E-03 1.03E-03 1.09E-03 9.35E-04 5.25E-04 7.81E-04 1.36E-03 2.10E-03

1.54

0.050

0.005

0.007

1.78 1.06E-03 1.44E-03

6.079 16.24(*)

A4-T1

11.0 - 11.9

0.460

1.240

0.455

0.452

0.447

0.441

0.435

0.422

0.943

0.428

0.900

0.426

0.869

0.422

0.043

0.007

0.005

1.96 2.35E-03 2.22E-03 1.11E-03 2.38E-03 2.06E-03 5.12E-04 4.07E-03 1.03E-03 7.05E-05 6.75E-04 1.28E-04 1.08E-04 4.12E-04 3.82E-04

1.30

0.030

0.005

0.003

1.51 5.49E-04 2.78E-04

6.273

1.593

A8-T1

8.5 - 9.4

0.743

0.742

0.741

0.741

0.740

0.737

0.735

0.422

0.736

0.428

0.736

0.426

0.735

0.422

0.010

0.001

0.001

0.92 5.25E-04 5.06E-03 2.14E-03 4.61E-03 2.68E-04 4.67E-03 4.07E-03 2.42E-05 6.93E-06 1.53E-06

0.85

0.006

0.001

0.001

1.08 1.56E-05 6.12E-05

9.592

0.833

2b

0.511

0.474

0.421

0.362

0.297

0.251

0.214

0.051

0.013

0.25

8.90E-04 4.22E-04 7.45E-04 8.52E-04 1.69E-03 1.32E-03 4.19E-03 2.49E-03 3.02E-03 2.85E-03 4.76E-03 7.38E-03

1.03

0.138

0.033

0.008

1.00

2.650

1.317

1.310

1.293

1.265

1.185

1.091

0.336

0.033

0.057

2.05

2.81E-03 2.19E-03 4.56E-03 3.43E-03 2.24E-03 2.11E-03

0.99

0.144

0.014

0.024

2.07 3.76E-04 5.13E-03

9.913

6.764

0.125

0.25

0.269

0.50

1.00

4.00

0.25

0.50

1.00

2.00

4.00

8.00

0.125

0.25

0.50

1.00

2.00

4.00

8.00

1.39E-04 1.04E-04 3.82E-04

A10-T1

9.5 - 10.3

0.552

A16 - T1

11.00 - 11.90

1.330

BB6-T1

7.8 - 8.6

0.610

0.609

0.606

0.603

0.599

0.595

0.586

0.593

0.590

0.587

0.030

0.002

0.005

0.79 3.46E-04 1.39E-03 1.28E-03 3.90E-03 2.49E-03 4.55E-03

8.80E-05 1.70E-04 6.44E-05

1.89E-04 1.38E-04

0.90

0.019

0.002

0.003

1.00

1.64E-04

BB8-T1

9.60-10.8

0.912

0.909

0.906

0.895

0.879

0.859

0.831

0.847

0.843

0.834

0.095

0.014

0.011

0.79 2.51E-03 1.49E-03 3.08E-03 2.89E-03 4.39E-04 1.58E-03

1.09E-04 3.08E-04 2.18E-04

6.40E-03 1.09E-03

1.17

0.050

0.008

0.006

1.00

3.74E-03

10

L7-T1

10.4 - 11.65

0.711

0.710

0.710

0.709

0.708

0.706

0.703

0.010

0.001

0.002

1.66

3.13E-03 3.90E-03 1.16E-02 4.84E-04 1.79E-04 1.34E-02

6.18E-05 1.07E-03

1.17

0.006

0.001

0.001

1.42

3.77E-04

11

L4-T2

18.3 - 19.5

0.512

0.511

0.511

0.510

0.510

0.508

0.506

0.008

0.001

0.008

2.35

2.71E-03 5.38E-04 3.95E-03 1.81E-04 2.18E-04 2.12E-04

2.07E-05 1.07E-04 3.52E-05 1.89E-04 2.83E-04 9.50E-04

1.97

0.006

0.000

0.005

1.19 2.07E-05 4.74E-04

1.159

0.705

0.254

0.125

1.084

0.260

2.00

1.121

0.705

0.703

3.76E-04 3.78E-04 1.04E-03 1.84E-03 5.90E-03 7.65E-03

6.85E-06 3.89E-05

7.38E-03

10.95(*)

Lp - Layer

0.981

1.092

8.00

Cv90-NC
m2/yr

1.038

1.158

4.00

Cv90-OC
m2/yr

1.072

1.214

2.00

C-NC

1.093

1.240

1.00

C-OC

1.099

1.271

0.50

H s qu c kt OCR
Over Consolidation Ratio

1.109

10.00 - 10.90

0.25

T s n Swelling Ratio
SR

8.5 - 9.3

B2-T1

0.125

T s nn li
Recompession Ratio RR

A1-T1

0.00

T s nn Compession
Ratio CR

su, m
depth, m

S hiu mu
Sample No.

H s c kt ng - Vertical coefficient of Compression, Cv90, cm/sec


Tng ng vi cp AL - Correspond to the Load Pressure, kG/cm

S th t - No.

H s rng - Void Ratio e - D ti / UnLoad T.


H s rng - Void Ratio, e Tng ng vi cp AL - Correspond
vi cp AL - Correspond to the Load Pressure,
to the Load Pressure, kG/cm
kG/cm

Ch s nn Cc
Compression index Cc

Cng trnh: KHU LIN HP NH MY THP V CNG SN DNG FORMOSA H TNH


Project:
THE INTEGRATED STEEL MILL AND SONDUONG PORT FORMOSA HATINH
Ngy - Date: 23/08/09

2b

1.364

19.325

1.031

2b

7.458

0.633

5b

Appendix 6.1
Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation
Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

BNG TNG HP NN C KT CA CC LP T - KHU VC DI NC


SUMMARY OF OEDO-CONSOLIDATION TEST RESULTS OF SOIL LAYERS - OFFSHORE AREA

H s qu c kt OCR
Over Consolidation Ratio

T s n Swelling Ratio
SR

T s nn li
Recompession Ratio RR

AL c hiu thng ng, kG/cm


Effective vertical pressure

AL tin c kt Pc, kG/cm2


Pre. Consolidation pressure Pc

Ch s n Cs
Swelling index Cs

Cc thng s c kt - Consolidation parameters

1.038

0.981

0.925

0.938

0.936

0.926

0.185

0.017

0.010 0.52(*) 3.66E-02 2.41E-02 3.98E-02 3.24E-02 2.71E-02 1.32E-02

1.86E-03 1.55E-03 1.30E-03 7.51E-04 5.96E-04 6.89E-04

0.84

0.088

0.008

0.005

1.00

3.37E-03

2.111

1.158

1.092

0.966

0.862

0.943

0.900

0.869

0.421

0.091

0.061 0.66(*) 5.48E-01 8.96E-02 1.00E-01 5.73E-02 5.58E-02 2.29E-02

2.35E-03 9.46E-04 1.45E-03 7.90E-04 8.43E-04 9.27E-04

1.01

0.185

0.040

0.027

1.00

1.23E-02

2.654

B2-T2

16.00 - 16.80

0.552 1.240

0.549

0.547

0.544

0.539

0.528

0.504

0.943

0.520

0.900

0.512

0.869

0.507

0.078

0.007

0.011

2.73 5.48E-01 1.30E-02 6.08E-03 2.98E-03 3.38E-03 3.67E-03 3.80E-03 2.35E-03 1.58E-03 1.56E-03 2.33E-03 4.20E-03 4.95E-03 6.52E-03

1.54

0.050

0.005

0.007

1.78 1.06E-03 1.44E-03

6.079 16.24(*)

A4-T1

11.0 - 11.9

0.460 1.240

0.455

0.452

0.447

0.441

0.435

0.422

0.943

0.428

0.900

0.426

0.869

0.422 0.043(*)

0.007

0.005

1.96 5.48E-01 2.09E-02 9.27E-03 6.61E-03 4.25E-03 2.22E-03 2.22E-03 2.35E-03 2.22E-03 1.11E-03 2.38E-03 2.06E-03 5.12E-04 4.07E-03

1.30 0.03(*)

0.005

0.003

1.51 5.49E-04 2.78E-04

6.273

A10-T1

9.5 - 10.3

0.552 0.511

0.474

0.421

0.362

0.297

0.251

0.269

0.260

0.254

0.214

0.051

0.013 0.25(*) 2.09E-01 1.91E-01 1.39E-01 7.61E-02 4.14E-02 1.49E-02

1.03

0.138

0.033

0.008

1.00

7.38E-03

BB8-T1

9.60-10.8

0.912 0.909

0.906

0.895

0.879

0.859

0.831

0.847

0.843

0.834

0.095

0.014

0.011

1.17

0.050

0.008

0.006

1.00

3.74E-03

0.198

0.031

0.019 1.825

0.102

0.016

0.009

1.214 2.68E-04 4.75E-03

2.00

4.00

8.00

0.125

0.25

0.50

1.00

2.00

4.00

Trung bnh - Average

0.125

0.25

0.50

1.00

2.00

4.00

8.00

0.79 5.25E-02 1.65E-02 2.25E-02 1.66E-02 1.03E-02 7.47E-03

0.125

0.25

0.50

1.00

2.00

4.00

8.00

8.90E-04 4.22E-04 7.45E-04 8.52E-04 1.69E-03 1.32E-03


2.51E-03 1.49E-03 3.08E-03 2.89E-03 4.39E-04 1.58E-03

6.176

1.593

2.650

1.364

2.074

Gtr nh nht - Min Value

0.078

0.007

0.005 0.785

0.050

0.005

0.003

1.000

2.78E-04

6.079

1.364

Gtr ln nht - Max value

0.421

0.091

0.061 2.733

0.185

0.040

0.027

1.778 1.06E-03 1.23E-02

6.273

2.654

0.422

0.01(*)

0.001

0.001

0.85 0.006(*)

0.001

0.001

1.08 1.56E-05 6.12E-05

9.592

0.833

0.030

0.002

0.005

0.79 2.96E-02 1.37E-02 6.56E-03 5.81E-03 2.53E-03 2.80E-03

0.703

0.01(*)

0.001

0.002

1.66

A8-T1

8.5 - 9.4

BB6-T1

7.8 - 8.6

L7-T1

10.4 - 11.65

0.743 0.742

0.741

0.741

0.740

0.737

0.735

0.610 0.609

0.606

0.603

0.599

0.595

0.586

0.711

0.710

0.710

0.709

0.708

0.706

0.422

0.736

0.428

0.593
0.703

0.736

0.426

0.590
0.705

0.735
0.587

0.705

0.92 3.11E-02 9.78E-04 9.15E-04 7.36E-04 1.71E-03 8.33E-04 2.22E-03 5.25E-04 5.06E-03 2.14E-03 4.61E-03 2.68E-04 4.67E-03 4.07E-03

1.95E-03 4.58E-04 1.00E-03 5.94E-04 7.04E-04 4.33E-04

3.46E-04 1.39E-03 1.28E-03 3.90E-03 2.49E-03 4.55E-03


3.13E-03 3.90E-03 1.16E-02 4.84E-04 1.79E-04 1.34E-02

0.019

0.002

0.003

1.00

1.64E-04

1.17 0.006(*)

0.90

0.001

0.001

1.42

3.77E-04

19.325

Lp - Layer

1.072

1.214

1.00

Cv90-NC
m2/yr

1.093

1.271 1.240

0.50

Cv90-OC
m2/yr

1.109 1.099

10.00 - 10.90

0.25

C-NC

8.5 - 9.3

B2-T1

0.125

C-OC

A1-T1

0.00

T s nn Compession
Ratio CR

su, m
depth, m

S hiu mu
Sample No.

H s nn th tch - Coefficient of volume compressibility, mv cm/kG Tng H s c kt ng - Vertical coefficient of Consodilation, Cv90, cm/s Tng
ng vi cp AL - Correspond to the Load Pressure, kG/cm
ng vi cp AL - Correspond to the Load Pressure, kG/cm

S th t - No.

Ch s nn li Cr
Recompression index Cr

H s rng - Void Ratio e - D ti / UnLoad


T. vi cp AL - Correspond to the Load
Pressure, kG/cm

H s rng - Void Ratio, e Tng ng vi cp AL Correspond to the Load Pressure, kG/cm

Ch s nn Cc
Compression index Cc

Cng trnh: KHU LIN HP NH MY THP V CNG SN DNG FORMOSA H TNH


Project:
THE INTEGRATED STEEL MILL AND SONDUONG PORT FORMOSA HATINH
Ngy - Date: 23/08/09

2b

10.95(*)

2b

1.031

2b

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 1

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Cng trnh - Project:

THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH
S hiu mu - Sample No.

A1 - T1

S hiu LK - Boring No.

A1 -

su - Depth, m:

8.5 - 9.3

Ngy th nghim - Tested Date:

10-Mar-09

Ngi th nghim - Tested by:

Sn

Ch s nn - Compression Index Cc:

0.185

T s nn - Compression Ratio CR:

0.088

Ch s nn li - Recompression Index Cr:

0.017

T s nn li - Recompression Ratio RR:

0.008

Ch s n - Swelling Index Cs:

0.010

T s n - Swelling Ratio SR:

0.005

p lc tin c kt - Preconsolidation Press., kG/cm :

0.52

1.120

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

0.000

1.109
1.099
1.093

0.500

1.072

1.000

1.038

2.000

0.981

4.000

0.925

2.000

0.926

0.500

0.936

0.125

0.938

0.000

0.000

0.000

0.000

0.000

0.000

1.054

1.022

0.989

0.956

0.923
0.0

0.000 - 0.125

1.858E-03

3.663E-02

0.125 - 0.250

1.553E-03

2.406E-02

0.250 - 0.500

1.304E-03

3.983E-02

0.500 - 1.000

7.513E-04

3.242E-02

1.000 - 2.000

5.963E-04

2.711E-02

2.000 - 4.000

6.887E-04

1.317E-02

10.0

1.92E-03

4.12E-02

1.69E-03

3.63E-02

1.46E-03

3.14E-02

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

0.1
1.0
p lc - Pressure, kG/cm 2

1.23E-03

2.66E-02

9.96E-04

2.17E-02

7.64E-04

1.68E-02

5.33E-04

0.0

1.19E-02

0.1

1.0

p lc - Pressure, kG/cm

10.0

mv, cm2/kG

0.125
0.250

H s rng - Void Ratio

1.087

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 2

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Cng trnh - Project:

THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH
S hiu mu - Sample No:

A1 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

8.5 - 9.3

0.000 - 0.125
Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

35.0

42.0

0.000
0.042
0.084
0.126
0.168
0.210
0.252

d0, mm:

0.0000

d90, mm:

0.1047

t90, pht - min:

12.22

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

1.86E-03

0.125 - 0.250

Bin dng -Deformation Dial Reading, mm

Thi gian, pht - Square root of Time, min.


0.0

7.0

14.0

21.0

0.000
0.024
0.049
0.073
0.098
0.122
0.147

d0, mm:

0.0000

d90, mm:

0.0687

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

14.36
1.55E-03

28.0

35.0

42.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 3

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Cng trnh - Project:

THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH
S hiu mu - Sample No:

A1 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

0.0

7.0

8.5 - 9.3

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


14.0
21.0
28.0

35.0

42.0

35.0

42.0

Bin dng -Deformation Dial Reading, mm

0.000
0.062
0.125
0.187
0.250
0.312
0.375

d0, mm:

0.0191

d90, mm:

0.2467

t90, pht - min:

16.81

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

1.30E-03

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


0.0

7.0

14.0

21.0

28.0

Bin dng -Deformation Dial Reading, mm

0.000
0.093
0.185
0.278
0.371
0.464
0.556

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0000
0.3705
28.19
7.51E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 4

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Cng trnh - Project:

THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH
S hiu mu - Sample No:

A1 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

8.5 - 9.3

1.000 - 2.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

35.0

42.0

35.0

42.0

0.000
0.145
0.290
0.436
0.581
0.726
0.871

d0, mm:

0.0022

d90, mm:

0.6220

t90, pht - min:

33.64

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

5.96E-04

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

0.000
0.145
0.290
0.434
0.579
0.724
0.869

d0, mm:

0.0000

d90, mm:

0.6023

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

27.16
6.89E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 5

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

A4-T1

su - Depth, m:

11.0 - 11.9

Ngy th nghim - Tested Date:

16-Jul-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.043

T s nn - Compression Ratio CR:

Quang
0.030

Ch s nn li - Recompression Index Cr:

0.007

T s nn li - Recompression Ratio RR:

0.005

Ch s n - Swelling Index Cs:

0.005

T s n - Swelling Ratio SR:

0.003

p lc tin c kt - Preconsolidation Press., kG/cm :

1.96

0.470

H s rng Void Ratio

0.460

0.250

0.455

0.500

0.452

1.000

0.447

2.000

0.441

4.000

0.435

8.000

0.422

4.000

0.422

1.000

0.426

0.250

0.428

0.458
H s rng - Void Ratio

Cp p lc Pressure
Increment,
kG/cm2

0.445

0.433

0.420
0.1

1.0

10.0

100.0

0.100 - 0.250

2.220E-03

2.090E-02

0.250 - 0.500

1.114E-03

9.269E-03

0.500 - 1.000

2.385E-03

6.613E-03

1.000 - 2.000

2.058E-03

4.248E-03

2.000 - 4.000

5.122E-04

2.221E-03

4.000 - 8.000

4.072E-03

2.223E-03

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

4.25E-03

2.18E-02

3.60E-03

1.84E-02

2.94E-03

1.50E-02

2.29E-03

1.16E-02

1.64E-03

8.14E-03

9.87E-04

4.71E-03

3.34E-04

0.1

1.29E-03

1.0
p lc - Pressure, kG/cm 2

10.0

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 6

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A4-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

11.0 - 11.9

0.000 - 0.250

Thi gian, pht - Square root of Time, min.


0.0

2.5

5.0

7.5

10.0

12.5

15.0

12.5

15.0

Bin dng -Deformation Dial Reading, mm

0.000
0.020
0.040
0.060
0.080
0.100
0.120

d0, mm:

0.0001

d90, mm:

0.0718

t90, pht - min:

10.24

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.22E-03

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100

d0, mm:

0.0008

d90, mm:

0.0538

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

20.25
1.11E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 7

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A4-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :


0.0

3.5

11.0 - 11.9

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


7.0
10.5
14.0

17.5

21.0

Bin dng -Deformation Dial Reading, mm

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140

d0, mm:

0.0000

d90, mm:

0.0756

t90, pht - min:

9.39

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

0.0

3.3

2.38E-03

1.000 - 2.000

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

Bin dng -Deformation Dial Reading, mm

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0000
0.0971
10.77
2.06E-03

16.7

20.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 8

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A4-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

11.0 - 11.9

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

16.7

20.0

16.7

20.0

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180

d0, mm:

0.0196

d90, mm:

0.1211

t90, pht - min:

42.77

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

5.12E-04

4.000 - 8.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400

d0, mm:

0.0167

d90, mm:

0.2200

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

5.29
4.07E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 9

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

A8-T1

su - Depth, m:

7.5 - 8.4

Ngy th nghim - Tested Date:

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.010

16-Jul-09
Quang

T s nn - Compression Ratio CR:

0.006

Ch s nn li - Recompression Index Cr:

0.001

T s nn li - Recompression Ratio RR

0.001

Ch s n - Swelling Index Cs:

0.001

T s n - Swelling Ratio SR:

0.001

p lc tin c kt - Preconsolidation Press., kG/cm :

0.92

0.744

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

0.743

0.125

0.742

0.250

0.741

0.500

0.741

1.000

0.740

2.000

0.737

4.000

0.735

2.000

0.735

0.500

0.736

0.125

0.736

H s rng - Void Ratio

0.742

0.740

0.738

0.736

0.734
1.0

10.0

p lc - Pressure, kG/cm

0.100 - 0.125

5.252E-04

3.105E-02

0.125 - 0.250

5.062E-03

9.783E-04

0.250 - 0.500

2.136E-03

9.155E-04

0.500 - 1.000

4.612E-03

7.362E-04

1.000 - 2.000

2.679E-04

1.706E-03

2.000 - 4.000

4.668E-03

8.331E-04

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

100.0

6.00E-03

3.00E-02

5.00E-03

2.50E-02

4.00E-03

2.00E-02

3.00E-03

1.50E-02

2.00E-03

1.00E-02

1.00E-03

5.00E-03

0.00E+00

0.1

0.00E+00

1.0
p lc - Pressure, kG/cm 2

10.0

mv, cm2/kG

0.1

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 10

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A8-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

7.5 - 8.4

0.000 - 0.125

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

12.5

15.0

12.5

15.0

0.000

0.005

0.010

0.015

0.020

0.025

d0, mm:

0.0000

d90, mm:

0.0177

t90, pht - min:

43.37

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

5.25E-04

0.125 - 0.250

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

0.000
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005
0.005

d0, mm:

0.0003

d90, mm:

0.0031

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

4.49
5.06E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 11

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A8-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :


0.0

3.5

7.5 - 8.4

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


7.0
10.5
14.0

17.5

21.0

Bin dng -Deformation Dial Reading, mm

0.000
0.001
0.002
0.003
0.004
0.005
0.006
0.007
0.008

d0, mm:

0.0000

d90, mm:

0.0052

t90, pht - min:

10.65

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

0.0

3.3

2.14E-03

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

Bin dng -Deformation Dial Reading, mm

0.000
0.002
0.004
0.006
0.008
0.010
0.012
0.014
0.016

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0022
0.0106
4.93
4.61E-03

16.7

20.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 12

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A8-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

7.5 - 8.4

1.000 - 2.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

16.7

20.0

16.7

20.0

0.000
0.010
0.020
0.030
0.040
0.050
0.060

d0, mm:

0.0012

d90, mm:

0.0402

t90, pht - min:

84.64

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.68E-04

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080

d0, mm:

0.0139

d90, mm:

0.0520

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

4.84
4.67E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 13

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

A10 - T1

S hiu LK - Boring No.

A10

su - Depth, m:

9.5 - 10.3

Ngy th nghim - Tested Date:

23/03/09

Ngi th nghim - Tested by:

Quang

Ch s nn - Compression Index Cc:

0.214

T s nn - Compression Ratio CR:

0.138

Ch s nn li - Recompression Index Cr:

0.051

T s nn li - Recompression Ratio RR:

0.033

Ch s n - Swelling Index Cs:

0.013

T s n - Swelling Ratio SR:

0.008

p lc tin c kt - Preconsolidation Press., kG/cm :

0.25

0.600

0.000

0.552

0.125

0.511

0.250

0.474

0.500

0.421

1.000

0.362

2.000

0.297

4.000

0.251

2.000

0.254

0.500

0.260

0.125

0.269

0.000

0.000

0.000

0.000

0.000

0.000

0.500

0.400

0.300

0.200

0.000 - 0.125

8.905E-04

2.092E-01

0.125 - 0.250

4.218E-04

1.905E-01

0.250 - 0.500

7.446E-04

1.386E-01

0.500 - 1.000

8.519E-04

7.610E-02

1.000 - 2.000

1.689E-03

4.142E-02

2.000 - 4.000

1.319E-03

1.490E-02

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

p lc - Pressure, kG/cm 2

7.52E-03

2.19E-01

6.29E-03

1.83E-01

5.06E-03

1.48E-01

3.82E-03

1.12E-01

2.59E-03

7.64E-02

1.35E-03

4.08E-02

1.21E-04

0.0

5.19E-03

0.1

1.0

p lc - Pressure, kG/cm

10.0
2

mv, cm2/kG

H s rng Void Ratio

H s rng - Void Ratio

Cp p lc Pressure
Increment,
kG/cm2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 14

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A10 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

9.5 - 10.3

0.000 - 0.125
Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

35.0

42.0

35.0

42.0

0.000
0.180
0.360
0.540
0.721
0.901
1.081

d0, mm:

0.0161

d90, mm:

0.6139

t90, pht - min:

25.00

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

8.90E-04

0.125 - 0.250
Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

0.000
0.124
0.247
0.371
0.494
0.618
0.742

d0, mm:

0.0000

d90, mm:

0.5444

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

48.60
4.22E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 15

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A10 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

0.0

7.0

9.5 - 10.3

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


14.0
21.0
28.0

35.0

42.0

35.0

42.0

Bin dng -Deformation Dial Reading, mm

0.000
0.192
0.384
0.576
0.769
0.961
1.153

d0, mm:

0.0000

d90, mm:

0.7923

t90, pht - min:

25.64

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

7.45E-04

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


0.0

7.0

14.0

21.0

28.0

Bin dng -Deformation Dial Reading, mm

0.000
0.226
0.452
0.678
0.904
1.130
1.356

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0394
0.9093
20.25
8.52E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 16

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A10 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

9.5 - 10.3

1.000 - 2.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

35.0

42.0

35.0

42.0

0.000
0.285
0.571
0.856
1.142
1.427
1.713

d0, mm:

0.1137

d90, mm:

1.0605

t90, pht - min:

9.00

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

1.69E-03

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

0.000
0.194
0.387
0.581
0.775
0.968
1.162

d0, mm:

0.0000

d90, mm:

0.6813

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

9.90
1.32E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 17

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

A16 - T1

su - Depth, m:

11.00 - 11.90

Ngy th nghim - Tested Date:

20-Jul-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.336

T s nn - Compression Ratio CR:

0.144

Ch s nn li - Recompression Index Cr:

0.033

T s nn li - Recompression Ratio RR:

0.014

Ch s n - Swelling Index Cs:

0.057

T s n - Swelling Ratio SR:

0.024

p lc tin c kt - Preconsolidation Press., kG/cm :

Quang

2.05

1.332

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

1.330

0.250

1.317

0.500

1.310

1.000

1.293

2.000

1.265

4.000

1.185

8.000

1.084

4.000

1.091

1.000

1.121

0.250

1.159

H s rng - Void Ratio

1.291

1.249

1.207

1.165

1.124

1.082
0.1

1.0

10.0

100.0

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

5.00E-03

5.00E-02

4.50E-03

4.50E-02

4.00E-03

4.00E-02

3.50E-03

3.50E-02

3.00E-03

3.00E-02

2.50E-03

2.50E-02

2.00E-03

2.00E-02

0.100 - 0.250

2.810E-03

3.756E-02

0.250 - 0.500

2.188E-03

1.252E-02

0.500 - 1.000

4.563E-03

1.419E-02

1.50E-03

1.50E-02

1.000 - 2.000

3.433E-03

1.212E-02

1.00E-03

1.00E-02

2.000 - 4.000

2.238E-03

1.707E-02

4.000 - 8.000

2.111E-03

1.084E-02

5.00E-04

5.00E-03

0.00E+00

0.00E+00

0.1

1.0
p lc - Pressure, kG/cm

10.0
2

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 18

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A16 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

11.00 - 11.90

0.000 - 0.250

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.5

7.0

10.5

14.0

17.5

21.0

35.0

42.0

0.000

0.050

0.100

0.150

0.200

0.250

d0, mm:

0.0000

d90, mm:

0.1288

t90, pht - min:

8.07

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

2.81E-03

H s c kt - Coefficient of Consolidation Cv90, cm /sec 0.250 - 0.500


Thi gian, pht - Square root of Time, min.
Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160

d0, mm:

0.0144

d90, mm:

0.0860

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

10.24
2.19E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 19

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A16 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

0.0

3.3

11.00 - 11.90

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

16.7

20.0

Bin dng -Deformation Dial Reading, mm

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350

d0, mm:

0.0218

d90, mm:

0.1840

t90, pht - min:

4.84

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

4.56E-03

H s c kt - Coefficient of Consolidation Cv90, cm /sec 1.000 - 2.000


Thi gian, pht - Square root of Time, min.
0.0

3.5

7.0

10.5

14.0

Bin dng -Deformation Dial Reading, mm

0.000
0.100
0.200
0.300
0.400
0.500
0.600

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0139
0.2910
6.25
3.43E-03

17.5

21.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 20

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

A16 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

11.00 - 11.90

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

16.7

20.0

16.7

20.0

0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600

d0, mm:

0.0359

d90, mm:

0.8163

t90, pht - min:

9.00

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

2.24E-03

H s c kt - Coefficient of Consolidation Cv90, cm /sec 4.000 - 8.000


Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000

d0, mm:

0.0813

d90, mm:

1.0724

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

8.41
2.11E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 21

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

B2 - T1

su - Depth, m:

10.00 - 10.90

Ngy th nghim - Tested Date:

22-Jun-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.421

T s nn - Compression Ratio CR:

0.185

Ch s nn li - Recompression Index Cr:

0.091

T s nn li - Recompression Ratio RR:

0.040

Ch s n - Swelling Index Cs:

0.061

T s n - Swelling Ratio SR:

0.027

p lc tin c kt - Preconsolidation Press., kG/cm :

Quang

0.66

1.300

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

1.271

0.125

1.240

0.250

1.214

0.500

1.158

1.000

1.092

2.000

0.966

4.000

0.862

2.000

0.869

0.500

0.900

0.125

0.943

H s rng - Void Ratio

1.200

1.100

1.000

0.900

0.800
0.1

1.0

10.0

100.0

0.100 - 0.125

2.348E-03

5.477E-01

0.125 - 0.250

9.458E-04

8.956E-02

0.250 - 0.500

1.450E-03

1.003E-01

0.500 - 1.000

7.900E-04

5.730E-02

1.000 - 2.000

8.429E-04

5.578E-02

2.000 - 4.000

9.267E-04

2.285E-02

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

2.50E-03

2.50E-01

2.00E-03

2.00E-01

1.50E-03

1.50E-01

1.00E-03

1.00E-01

5.00E-04

5.00E-02

0.00E+00

0.00E+00

0.0

0.1

1.0

p lc - Pressure, kG/cm

10.0
2

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 22

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

B2 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

10.00 - 10.90

0.000 - 0.125
Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.5

7.0

10.5

14.0

17.5

21.0

35.0

42.0

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0.500

d0, mm:

0.0000

d90, mm:

0.3130

t90, pht - min:

9.59

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.35E-03

0.125 - 0.250
Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450

d0, mm:

0.0032

d90, mm:

0.2591

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

23.04
9.46E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 23

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

B2 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

0.0

3.3

10.00 - 10.90

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

16.7

20.0

Bin dng -Deformation Dial Reading, mm

0.000

0.200

0.400

0.600

0.800

1.000

1.200

d0, mm:

0.0000

d90, mm:

0.5732

t90, pht - min:

14.34

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

1.45E-03

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


0.0

3.5

7.0

10.5

14.0

Bin dng -Deformation Dial Reading, mm

0.000
0.200
0.400
0.600
0.800
1.000
1.200

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0000
0.6549
24.16
7.90E-04

17.5

21.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 24

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

B2 - T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

10.00 - 10.90

1.000 - 2.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

16.7

20.0

16.7

20.0

0.000

0.500

1.000

1.500

2.000

2.500
d0, mm:

0.0000

d90, mm:

1.2751

t90, pht - min:

19.97

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

8.43E-04

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800

d0, mm:

0.0000

d90, mm:

1.0448

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

15.29
9.27E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 25

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

B2 - T2

su - Depth, m:

16.00 - 16.80

Ngy th nghim - Tested Date:

22-Jun-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.078

T s nn - Compression Ratio CR:

0.050

Ch s nn li - Recompression Index Cr:

0.007

T s nn li - Recompression Ratio RR:

0.005

Ch s n - Swelling Index Cs:

0.011

T s n - Swelling Ratio SR:

0.007

p lc tin c kt - Preconsolidation Press., kG/cm :

Quang

2.73

0.550

H s rng Void Ratio

0.552

0.250

0.549

0.500

0.547

1.000

0.544

2.000

0.539

4.000

0.528

8.000

0.504

4.000

0.507

1.000

0.512

0.250

0.520

0.538
H s rng - Void Ratio

Cp p lc Pressure
Increment,
kG/cm2

0.525

0.513

0.500
0.1

1.0

10.0

100.0

0.100 - 0.250

1.576E-03

1.302E-02

0.250 - 0.500

1.562E-03

6.075E-03

0.500 - 1.000

2.332E-03

2.983E-03

1.000 - 2.000

4.197E-03

3.377E-03

2.000 - 4.000

4.949E-03

3.670E-03

4.000 - 8.000

6.520E-03

3.799E-03

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

7.00E-03

1.40E-02

6.00E-03

1.20E-02

5.00E-03

1.00E-02

4.00E-03

8.00E-03

3.00E-03

6.00E-03

2.00E-03

4.00E-03

1.00E-03

2.00E-03

0.00E+00

0.00E+00

0.1

1.0
p lc - Pressure, kG/cm

10.0
2

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 26

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

B2 - T2

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

16.00 - 16.80

0.000 - 0.250

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.5

7.0

10.5

14.0

17.5

21.0

35.0

42.0

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140

d0, mm:

0.0139

d90, mm:

0.0585

t90, pht - min:

14.44

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

1.58E-03

0.250 - 0.500

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

7.0

14.0

21.0

28.0

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090

d0, mm:

0.0025

d90, mm:

0.0373

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

14.44
1.56E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 27

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

B2 - T2

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

0.0

3.3

16.00 - 16.80

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

16.7

20.0

Bin dng -Deformation Dial Reading, mm

0.000

0.020

0.040

0.060

0.080

0.100

0.120

d0, mm:

0.0150

d90, mm:

0.0491

t90, pht - min:

9.61

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.33E-03

1.000 - 2.000

Thi gian, pht - Square root of Time, min.


0.0

3.5

7.0

10.5

14.0

Bin dng -Deformation Dial Reading, mm

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0200
0.0972
5.29
4.20E-03

17.5

21.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 28

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

B2 - T2

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

16.00 - 16.80

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

16.7

20.0

16.7

20.0

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350

d0, mm:

0.0187

d90, mm:

0.1864

t90, pht - min:

4.41

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

4.95E-03

4.000 - 8.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.100
0.200
0.300
0.400
0.500
0.600
0.700

d0, mm:

0.0224

d90, mm:

0.3698

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

3.24
6.52E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 29

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

BB6-T1

su - Depth, m:

7.8 - 8.6

Ngy th nghim - Tested Date:

20-Jul-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.030

T s nn - Compression Ratio CR:

Quang
0.019

Ch s nn li - Recompression Index Cr:

0.002

T s nn li - Recompression Ratio RR:

0.002

Ch s n - Swelling Index Cs:

0.005

T s n - Swelling Ratio SR:

0.003

p lc tin c kt - Preconsolidation Press., kG/cm :

0.79

0.610

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

0.610

0.125

0.609

0.250

0.606

0.500

0.603

1.000

0.599

2.000

0.595

4.000

0.586

2.000

0.587

0.500

0.590

0.125

0.593

H s rng - Void Ratio

0.605

0.600

0.595

0.590

0.585

0.580
0.0

0.1

1.0

10.0

100.0

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

5.00E-03

5.00E-02

4.50E-03

4.50E-02

4.00E-03

4.00E-02

3.50E-03

3.50E-02

3.00E-03

3.00E-02

2.50E-03

2.50E-02

2.00E-03

2.00E-02

0.100 - 0.125

3.462E-04

2.958E-02

0.125 - 0.250

1.385E-03

1.373E-02

0.250 - 0.500

1.284E-03

6.562E-03

1.50E-03

1.50E-02

0.500 - 1.000

3.901E-03

5.813E-03

1.00E-03

1.00E-02

1.000 - 2.000

2.487E-03

2.528E-03

2.000 - 4.000

4.554E-03

2.804E-03

5.00E-04

5.00E-03

0.00E+00

0.1

0.00E+00

1.0
p lc - Pressure, kG/cm 2

10.0

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 30

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

BB6-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

7.8 - 8.6

0.000 - 0.125
Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

6.7

13.3

20.0

26.7

33.3

40.0

12.5

15.0

0.000

0.005

0.010

0.015

0.020

0.025

d0, mm:

0.0000

d90, mm:

0.0169

t90, pht - min:

65.80

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

3.46E-04

0.125 - 0.250

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080

d0, mm:

0.0050

d90, mm:

0.0442

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

16.40
1.39E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 31

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

BB6-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :


0.0

3.5

7.8 - 8.6

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


7.0
10.5
14.0

17.5

21.0

Bin dng -Deformation Dial Reading, mm

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080

d0, mm:

0.0000

d90, mm:

0.0375

t90, pht - min:

17.63

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

0.0

3.3

1.28E-03

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

Bin dng -Deformation Dial Reading, mm

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0174
0.0839
5.76
3.90E-03

16.7

20.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 32

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

BB6-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

7.8 - 8.6

1.000 - 2.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

16.7

20.0

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090

d0, mm:

0.0000

d90, mm:

0.0578

t90, pht - min:

8.94

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.49E-03

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180
0.200

d0, mm:

0.0024

d90, mm:

0.1306

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

4.84
4.55E-03

16.7

20.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 33

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No.

BB8-T1

su - Depth, m:

9.60-10.8

Sample height/Diameter, mm

25.4/63.5

Ch s nn - Compression Index Cc:

0.095

Ngy th nghim - Tested Date:

16-Jul-09

Ngi th nghim - Tested by:

Quang

T s nn - Compression Ratio CR:

0.050

Ch s nn li - Recompression Index Cr:

0.014

T s nn li - Recompression Ratio RR

0.008

Ch s n - Swelling Index Cs:

0.011

T s n - Swelling Ratio SR:

0.006

p lc tin c kt - Preconsolidation Press., kG/cm :

0.79

0.920

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

0.912

0.125

0.909

0.250

0.906

0.500

0.895

1.000

0.879

2.000

0.859

4.000

0.831

2.000

0.834

0.500

0.843

0.830

0.125

0.847

0.820

0.910
0.900

H s rng - Void Ratio

0.890
0.880
0.870
0.860
0.850
0.840

0.810
0.800
0.1

1.0

10.0

100.0

0.100 - 0.125

2.506E-03

5.248E-02

0.125 - 0.250

1.491E-03

1.652E-02

0.250 - 0.500

3.079E-03

2.253E-02

0.500 - 1.000

2.891E-03

1.661E-02

1.000 - 2.000

4.386E-04

1.027E-02

2.000 - 4.000

1.580E-03

7.468E-03

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

3.50E-03

7.00E-02

3.00E-03

6.00E-02

2.50E-03

5.00E-02

2.00E-03

4.00E-02

1.50E-03

3.00E-02

1.00E-03

2.00E-02

5.00E-04

1.00E-02

0.00E+00

0.1

0.00E+00

1.0
p lc - Pressure, kG/cm 2

10.0

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 34

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

BB8-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

9.60-10.8

0.000 - 0.125

Thi gian, pht - Square root of Time, min.


0.0

2.5

5.0

7.5

10.0

12.5

15.0

12.5

15.0

Bin dng -Deformation Dial Reading, mm

0.000
0.005
0.010
0.015
0.020
0.025
0.030
0.035
0.040
0.045
0.050

d0, mm:

0.0000

d90, mm:

0.0300

t90, pht - min:

9.09

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

2.51E-03

H s c kt - Coefficient of Consolidation Cv90, cm /sec 0.125 - 0.250

Thi gian, pht - Square root of Time, min.


Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100

d0, mm:

0.0062

d90, mm:

0.0534

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

15.21
1.49E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 35

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

BB8-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :


0.0

3.5

9.60-10.8

0.250 - 0.500

Thi gian, pht - Square root of Time, min.


7.0
10.5
14.0

17.5

21.0

Bin dng -Deformation Dial Reading, mm

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400

d0, mm:

0.0089

d90, mm:

0.1377

t90, pht - min:

7.29

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

3.08E-03

H s c kt - Coefficient of Consolidation Cv90, cm /sec 0.500 - 1.000

0.0

3.3

Thi gian, pht - Square root of Time, min.


6.7
10.0
13.3

Bin dng -Deformation Dial Reading, mm

0.000
0.050
0.100
0.150
0.200
0.250
0.300

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0000
0.1898
7.61
2.89E-03

16.7

20.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 36

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HATINH

S hiu mu - Sample No:

BB8-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

9.60-10.8

1.000 - 2.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

6.7

13.3

20.0

26.7

33.3

40.0

16.7

20.0

0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0.500

d0, mm:

0.0006

d90, mm:

0.2354

t90, pht - min:

49.00

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

4.39E-04

H s c kt - Coefficient of Consolidation Cv90, cm /sec 2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.100
0.200
0.300
0.400
0.500
0.600

d0, mm:

0.0000

d90, mm:

0.3415

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

13.04
1.58E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 37

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No.

L4-T2

su - Depth, m:

18.3 - 19.5

Ngy th nghim - Tested Date:

16-Jul-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.008

T s nn - Compression Ratio CR:

Quang
0.006

Ch s nn li - Recompression Index Cr:

0.001

T s nn li - Recompression Ratio RR:

0.000

Ch s n - Swelling Index Cs:

0.008

T s n - Swelling Ratio SR:

0.005

p lc tin c kt - Preconsolidation Press., kG/cm :

2.35

0.512

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

0.512

0.250

0.511

0.500

0.511

1.000

0.510

2.000

0.510

4.000

0.508

8.000

0.506

H s rng - Void Ratio

0.511

0.510

0.509

0.508

0.507

0.505
1.0

10.0

p lc - Pressure, kG/cm

0.100 - 0.250

2.709E-03

3.813E-03

0.250 - 0.500

5.385E-04

1.621E-03

0.500 - 1.000

3.946E-03

2.634E-04

1.000 - 2.000

1.810E-04

3.817E-04

2.000 - 4.000

2.179E-04

5.563E-04

4.000 - 8.000

2.118E-04

4.160E-04

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

100.0

4.13E-03

3.99E-03

3.45E-03

3.34E-03

2.76E-03

2.69E-03

2.07E-03

2.04E-03

1.38E-03

1.39E-03

6.89E-04

7.37E-04

0.00E+00

0.1

8.59E-05

1.0
p lc - Pressure, kG/cm 2

10.0

mv, cm2/kG

0.1

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 38

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No:

L4-T2

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

18.3 - 19.5

0.000 - 0.250

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

12.5

15.0

33.3

40.0

0.000

0.005

0.010

0.015

0.020

0.025

d0, mm:

0.0008

d90, mm:

0.0139

t90, pht - min:

8.41

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.71E-03

0.250 - 0.500

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

6.7

13.3

20.0

26.7

0.000

0.005

0.010

0.015

0.020

0.025

d0, mm:

0.0029

d90, mm:

0.0122

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

42.25
5.38E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 39

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No:

L4-T2

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :


0.0

3.5

18.3 - 19.5

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


7.0
10.5
14.0

17.5

21.0

Bin dng -Deformation Dial Reading, mm

0.000
0.001
0.002
0.003
0.004
0.005
0.006
0.007
0.008

d0, mm:

0.0011

d90, mm:

0.0041

t90, pht - min:

5.76

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

0.0

6.7

3.95E-03

1.000 - 2.000

Thi gian, pht - Square root of Time, min.


13.3
20.0
26.7

Bin dng -Deformation Dial Reading, mm

0.000
0.002
0.004
0.006
0.008
0.010
0.012
0.014
0.016
0.018

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0007
0.0094
125.44
1.81E-04

33.3

40.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 40

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No:

L4-T2

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

18.3 - 19.5

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

6.7

13.3

20.0

26.7

33.3

40.0

33.3

40.0

0.000
0.005
0.010
0.015
0.020
0.025
0.030
0.035
0.040

d0, mm:

0.0004

d90, mm:

0.0258

t90, pht - min:

104.04

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

Cp p lc - Pressure Increment, kG/cm :

2.18E-04

4.000 - 8.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

6.7

13.3

20.0

26.7

0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070

d0, mm:

0.0000

d90, mm:

0.0380

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

106.68
2.12E-04

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 41

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No.

L7-T1

su - Depth, m:

10.4 - 11.65

Ngy th nghim - Tested Date:

17-Jun-09

Sample height/Diameter, mm

25.4/63.5

Ngi th nghim - Tested by:

Ch s nn - Compression Index Cc:

0.010

T s nn - Compression Ratio CR:

Quang
0.006

Ch s nn li - Recompression Index Cr:

0.001

T s nn li - Recompression Ratio RR:

0.001

Ch s n - Swelling Index Cs:

0.002

T s n - Swelling Ratio SR:

0.001

p lc tin c kt - Preconsolidation Press., kG/cm :

1.66

0.711

Cp p lc Pressure
Increment,
kG/cm2

H s rng Void Ratio

0.711

0.250

0.710

0.500

0.710

1.000

0.709

2.000

0.708

4.000

0.706

8.000

0.703

4.000

0.703

1.000

0.705

0.250

0.705

H s rng - Void Ratio

0.710

0.708

0.707

0.706

0.704

0.703
0.1

1.0

10.0

100.0

0.100 - 0.250

3.126E-03

1.954E-03

0.250 - 0.500

3.902E-03

4.584E-04

0.500 - 1.000

1.161E-02

1.004E-03

1.000 - 2.000

4.839E-04

5.942E-04

2.000 - 4.000

1.790E-04

7.040E-04

4.000 - 8.000

1.338E-02

4.326E-04

Cv, cm2/sec

Cp p lc Pressure
Increment,
kG/cm

H s nn th
H s c kt tch - Coeff. of
Coefficient of
Volume
Consolidation
Compressibility
Cv90, cm/sec
mv, cm/kG

1.40E-02

2.03E-03

1.17E-02

1.75E-03

9.36E-03

1.47E-03

7.02E-03

1.19E-03

4.68E-03

9.14E-04

2.34E-03

6.35E-04

0.00E+00

0.1

3.56E-04

1.0
p lc - Pressure, kG/cm 2

10.0

mv, cm2/kG

p lc - Pressure, kG/cm 2

Cv
mv

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 42

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No:

L7-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

10.4 - 11.65

0.000 - 0.250

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

12.5

15.0

12.5

15.0

0.000
0.002
0.004
0.006
0.008
0.010
0.012

d0, mm:

0.0010

d90, mm:

0.0077

t90, pht - min:

7.29

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

3.13E-03

H s c kt - Coefficient of Consolidation Cv90, cm /sec 0.250 - 0.500

Thi gian, pht - Square root of Time, min.


Bin dng -Deformation Dial Reading, mm

0.0

2.5

5.0

7.5

10.0

0.000
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005

d0, mm:

0.0000

d90, mm:

0.0026

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

5.84
3.90E-03

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 43

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No:

L7-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :


0.0

3.5

10.4 - 11.65

0.500 - 1.000

Thi gian, pht - Square root of Time, min.


7.0
10.5
14.0

17.5

21.0

Bin dng -Deformation Dial Reading, mm

0.000

0.005

0.010

0.015

0.020

0.025

0.030

d0, mm:

0.0008

d90, mm:

0.0123

t90, pht - min:

1.96

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

1.16E-02

H s c kt - Coefficient of Consolidation Cv90, cm /sec 1.000 - 2.000

0.0

6.7

Thi gian, pht - Square root of Time, min.


13.3
20.0
26.7

Bin dng -Deformation Dial Reading, mm

0.000
0.002
0.004
0.006
0.008
0.010
0.012
0.014
0.016
0.018
0.020

d0, mm:
d90, mm:
t90, pht - min:
H s c kt - Coefficient of Consolidation Cv90, cm /sec:

0.0000
0.0136
46.97
4.84E-04

33.3

40.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.1
T - Sheet 44

TH NGHIM C KT - CONSOLIDATION TEST


(ASTM D2435)
KHU LIN HP GANG THP & CNG SN DNG FORMOSA H.T
THE INTERGRATED STEEL MILL & SON DUONG FORMOSA HA TINH OFFSHORE AREA

Cng trnh - Project:

S hiu mu - Sample No:

L7-T1

su - Depth, m:

Cp p lc - Pressure Increment, kG/cm :

10.4 - 11.65

2.000 - 4.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

6.7

13.3

20.0

26.7

33.3

40.0

16.7

20.0

0.000
0.005
0.010
0.015
0.020
0.025
0.030
0.035
0.040
0.045
0.050

d0, mm:

0.0000

d90, mm:

0.0322

t90, pht - min:

126.71

H s c kt - Coefficient of Consolidation Cv90, cm /sec:

1.79E-04

H s c kt - Coefficient of Consolidation Cv90, cm /sec 4.000 - 8.000

Thi gian, pht - Square root of Time, min.

Bin dng -Deformation Dial Reading, mm

0.0

3.3

6.7

10.0

13.3

0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140

d0, mm:

0.0191

d90, mm:

0.0586

t90, pht - min:


H s c kt - Coefficient of Consolidation Cv90, cm /sec:

1.69
1.34E-02

APPENDIX 6.2: DIRECT SHEAR TEST RESULTS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Phu luc - Appendix: 6.2


Cng ty C phn T Vn Thit K Cng - K thut Bin - PortCoast Consultant Corporation
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM CT TRC TIP


SUMMARY OF DIRECT SHEAR TEST RESULT
Cng trnh: KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
Project:

STT
No

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu
su Depth
Sample
(m)
name
1

2
5.55 - 6.00

Ngy th
m Dung trng Gc ma st trong Lc dnh - Internal Friction Cohesion c
nghim Test
Moisture
Density
date
Content initial % (G/cm3)
(Kg/cm2)
Angle
3
21-10-08

5
23.33

6
2.09

Lp
Layer

C2-S4

2653

0.097

A10-S4

5.55 - 6.00

10-10-08

21.97

2.02

3743

0.000

C5-S10

15.00 - 15.45

20-10-08

13.68

2.23

2603

0.062

A5-T1

10.0 - 10.9

20-07-09

17.64

2.11

1425

0.097

B2-T1

10.00 - 10.90

01-04-09

1.90

2823

0.079

BB8-T1

9.80-10.7

18-07-09

23.17

1.90

2635

0.000

L4-T1

15.3-16.05

08-08-09

20.89

2.05

2920

0.136

L7-T2

15.3 - 16.05

25-07-09

25.95

2.03

2628

0.091

BB6-T1

7.8 - 8.6

27-07-09

20.79

2.06

269

0.044

2b

10

CC4-T1

6.7 - 7.5

26-07-09

25.09

2.01

2251

0.033

2b

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.2

T - Sheet 1

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :

A5 - T1

su - Depth, m :

H khoan - Borehole No:

A5

10.0 - 10.9

H.s c.bin c.v ng - Ver.disp.trans. Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu 1
First Trial

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

20/7/2009

m - Moisture Content, %
Dung trng t - Wet Density, g/cm

Dung trng kh - Dry Density, g/cm 3


ng sut chnh - Normal stress, kG/cm

2
2

Giai on ct ng sut ct - Max. shear stress, kG/cm


Shear Stage Chuyn v ngang - Hor. Displacement, mm
ln - Settlement, mm
m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3
Sc khng ct Gc ma st trong - Internal Friction Angle
Shear Strength
Lc dnh - Cohesion C, kG/cm 2

20/7/2009

14.28

14.76

23.87

2.14

2.19

1.99

1.87

1.91

1.61

0.50

1.00

2.00

0.23

0.34

0.61

1.86

2.79

4.64

0.05

0.09

0.20

15.7

14.8

21.3

2.16

2.19

1.95

1.87

1.91

1.61

0.097
0.25
C.v ng - Ver. Disp, mm

0.60

0.50

0.40

0.20
0.15
0.10
0.05
0.00
0.00

0.30

0.20

2.00
4.00
6.00
8.00
C.v ngang - Hor. Disp, mm

10.00

1.25

0.10

2.00

4.00

6.00

8.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

10.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

20/7/2009

1425

0.70

0.00
0.00

Mu 2
Mu 3
Second Trial Third Trial

1.00

0.75

0.50

0.25

0.00
0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
ng sut chnh - Normal Stresses, kG/cm 2

Ph lc - Appendix 6.2
T - Sheet 2

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST


Cong trnh - Project

KHU LIEN HP GANG THEP & CANG SN DNG FORMOSA HA TNH

So hieu mau - Sample No.

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
A10-S4

o sau - Depth, m
Chieu cao mau - Initial Height, mm
ng knh mau - Diameter, mm

5.50 - 6.00
20.0
61.8

He so ch.v ng - Ver.disp.trans. Factor, mm/V


He so ch.v ngang - Hor.disp.trans. Factor, mm/V
He so cam bien o lc - Loadcell Factor, kG/mV
Mau th 1

Sau co ket
After consolidation

Second Trial
10-10-'08

Sau th nghiem
After test
Sc khang cat
Shear Strength

21.97
2.02

1.66

ng suat cat - Max. shear stress, kG/cm2


Chuyen v ngang - Hor. Displacement, mm
o lun - Settlement, mm
o am - Moisture Content, %
Dung trong t - Wet Density, g/cm3
Dung trong kho - Dry Density, g/cm3
Goc ma sat trong - Internal Friction Angle
Lc dnh - Cohesion c, kG/cm2

Shear Stage

10-10-'08

21.97
2.02

o am - Moisture Content, %
Dung trong t - Wet Density, g/cm3
Dung trong kho - Dry Density, g/cm3
Ap lc co ket - Consolidation pressure, kG/cm 2
o lun - Settlement, mm
Chieu cao mau - Height, mm
Dung trong kho - Dry Density, g/cm3
ng suat chnh - Normal stress, kG/cm2

Giai oan cat

1.66

1.00
0.09
19.91
1.67
1.00

2.00
0.60
19.40
1.71
2.00

0.77
1.72
0.15
21.27
2.03
1.67

1.55
3.52
0.10
26.76
2.18
1.72

3743

0.000
0.20
Chuyen v ng - Ver. Disp., mm

1.60
1.40
1.20
1.00
0.80
0.60

0.15

0.10

0.05

0.00

0.40

3
4
5
6
7
Chuyen v ngang - Hor. Disp., mm

0.20
0.00
0

Chuyen v ngang - Hor. Disp., mm

ng suat cat - Shear Stress, kG/cm2

2
ng suat cat - Shear Stress, kG/cm

Mau th 2

First Trial

Mau th - Specimen
Ngay TN - Tested Date
Ban au
Initial

-2.1438
-2.6686
50.9575

2.0
1.5
1.0
0.5
0.0
0.0

0.5

1.0

1.5

2.0

Cac ng suat chnh - Principal Stresses, kG/cm2

2.5

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation

Ph lc - Appendix 6.2

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

T - Sheet 3

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :

B2 - T1

H khoan - Borehole No:

B2

su - Depth, m :

10 M

H.s c.bin c.v ng - Ver.disp.trans.Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

Mu 1
First Trial

Mu 2
Second Trial

Mu 3
Third Trial

04-01-'09

04-01-'09

04-01-'09

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

1.89

1.93

1.89

Dung trng kh - Dry Density, g/cm 3

1.89

1.93

1.89

0.50

1.00

2.00

0.22

0.82

1.09

1.24

2.48

3.41

0.13

0.08

0.12

ng sut chnh - Normal stress, kG/cm

2
2

Giai on ct ng sut ct - Max. shear stress, kG/cm


Shear Stage Chuyn v ngang - Hor. Displacement, mm
ln - Settlement, mm
m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3
Sc khng ct Gc ma st trong - Internal Friction Angle
Shear Strength
Lc dnh - Cohesion C, kG/cm 2

2823
0.079
0.14
C.v ng - Ver. Disp, mm

1.20

0.80

0.10
0.08
0.06
0.04
0.02
0.00
0.00

0.60

2.00
4.00
6.00
C.v ngang - Hor. Disp, mm

8.00

0.40
1.40
0.20

0.00
0.00

2.00

4.00

6.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

8.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

1.00

0.12

1.20
1.00
0.80
0.60
0.40
0.20
0.00
0.00

0.50

1.00

1.50

ng sut chnh - Normal Stresses, kG/cm 2

2.00

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.2

T - Sheet 4

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :

BB6 - T1

H khoan - Borehole No:

su - Depth, m :

7.8 - 8.6

H.s c.bin c.v ng - Ver.disp.trans. Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

m - Moisture Content, %
Dung trng t - Wet Density, g/cm

Dung trng kh - Dry Density, g/cm 3


ng sut chnh - Normal stress, kG/cm

2
2

Giai on ct ng sut ct - Max. shear stress, kG/cm


Shear Stage Chuyn v ngang - Hor. Displacement, mm
ln - Settlement, mm
m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3

BB6

Mu 1
First Trial

Mu 2
Second Trial

Mu 3
Third Trial

27-07-'09

27-07-'09

27-07-'09

20.30

18.20

23.87

2.09

2.11

1.99

1.73

1.79

1.61

0.50

1.00

2.00

0.33

0.47

1.05

1.55

2.17

1.78

0.14

0.09

0.07

20.1

18.3

21.3

2.08

2.11

1.95

1.73

1.79

1.61

Sc khng ct Gc ma st trong - Internal Friction Angle


Shear Strength
Lc dnh - Cohesion C, kG/cm 2

269
0.044
0.16
C.v ng - Ver. Disp, mm

1.20

0.80

0.12
0.10
0.08
0.06
0.04
0.02
0.00
0.00

0.60

2.00
4.00
6.00
8.00
C.v ngang - Hor. Disp, mm

10.00

0.40
1.20
0.20

0.00
0.00

2.00

4.00

6.00

8.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

10.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

1.00

0.14

1.00
0.80
0.60
0.40
0.20
0.00
0.00

0.50

1.00

1.50

ng sut chnh - Normal Stresses, kG/cm 2

2.00

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.2

T - Sheet 5

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :

BB8 - T1

su - Depth, m :

H khoan - Borehole No:

BB8

9.8 - 10.9

H.s c.bin c.v ng - Ver.disp.trans. Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu 1
Mu 2
Mu 3
First Trial Second Trial Third Trial

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

18/7/2009

m - Moisture Content, %
Dung trng t - Wet Density, g/cm

Dung trng kh - Dry Density, g/cm 3


ng sut chnh - Normal stress, kG/cm

Giai on ct
Shear Stage

15.96

31.91

21.66

1.85

1.96

1.88

1.59

1.48

1.55

0.50

1.00

2.00

0.18

0.40

0.93

Chuyn v ngang - Hor. Displacement, mm

1.86

3.71

3.71

ln - Settlement, mm

0.09

0.17

0.64

21.4

21.7

28.1

1.94

1.81

1.98

1.59

1.48

1.55

ng sut ct - Max. shear stress, kG/cm

Sc khng ct Gc ma st trong - Internal Friction Angle


Shear Strength
Lc dnh - Cohesion C, kG/cm 2

2635
0.000
0.70
C.v ng - Ver. Disp, mm

1.00
0.90
0.80
0.70
0.60

0.60
0.50
0.40
0.30
0.20
0.10
0.00
0.00

0.50
0.40
0.30

2.00
4.00
6.00
8.00
C.v ngang - Hor. Disp, mm

10.00

1.25

0.20
0.10

2.00

4.00

6.00

8.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

10.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

18/7/2009

m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3

0.00
0.00

18/7/2009

1.00

0.75

0.50

0.25

0.00
0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
ng sut chnh - Normal Stresses, kG/cm 2

Ph lc - Appendix 6.2
T - Sheet 6

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST


Cong trnh - Project

KHU LIEN HP GANG THEP & CANG SN DNG FORMOSA HA TNH

So hieu mau - Sample No.

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
C2-S4

o sau - Depth, m
Chieu cao mau - Initial Height, mm
ng knh mau - Diameter, mm

5.55 - 6.00
20.0
61.8

He so ch.v ng - Ver.disp.trans. Factor, mm/V


He so ch.v ngang - Hor.disp.trans. Factor, mm/V
He so cam bien o lc - Loadcell Factor, kG/mV
Mau th 1

Sau co ket
After consolidation

Mau th 2

First Trial

Mau th - Specimen
Ngay TN - Tested Date
Ban au
Initial

Second Trial

Sau th nghiem
After test
Sc khang cat
Shear Strength

Third Trial
22-10-'08

23.33
2.09

o am - Moisture Content, %
Dung trong t - Wet Density, g/cm 3
Dung trong kho - Dry Density, g/cm 3
Ap lc co ket - Consolidation pressure, kG/cm 2

ng suat cat - Max. shear stress, kG/cm 2


Chuyen v ngang - Hor. Displacement, mm
o lun - Settlement, mm
o am - Moisture Content, %
Dung trong t - Wet Density, g/cm 3
Dung trong kho - Dry Density, g/cm 3
Goc ma sat trong - Internal Friction Angle
Lc dnh - Cohesion c, kG/cm 2

Shear Stage

Mau th 3

21-10-'08

o lun - Settlement, mm
Chieu cao mau - Height, mm
Dung trong kho - Dry Density, g/cm 3
ng suat chnh - Normal stress, kG/cm 2

Giai oan cat

-2.1438
-2.6686
50.9575

23.33
2.09

22-10-'08

23.33
2.09

1.69

1.69

1.69

0.25
0.03
19.97
1.70
0.25

0.50
0.07
19.93
1.70
0.50

1.00
0.12
19.88
1.70
1.00

0.25
3.32
0.09
20.74
2.05
1.70

0.31
4.65
0.07
20.24
2.05
1.70

0.62
3.45
0.06
19.28
2.04
1.71

2653

0.097
0.10
Chuyen v ng - Ver. Disp., mm

0.50

0.40

0.30

0.20

0.08
0.06
0.04
0.02
0.00
0

0.10

0.00
0

Chuyen v ngang - Hor. Disp., mm

ng suat cat - Shear Stress, kG/cm2

2
ng suat cat - Shear Stress, kG/cm

0.60

3
4
5
6
7
8
Chuyen v ngang - Hor. Disp., mm

10

0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.0

0.2

0.4

0.6

0.8

1.0

Cac ng suat chnh - Principal Stresses, kG/cm2

1.2

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.2

T - Sheet 7

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :

CC4 - T1

H khoan - Borehole No:

su - Depth, m :

6.7 - 7.5

H.s c.bin c.v ng - Ver.disp.trans. Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu 1
Mu 2
Mu 3
First Trial Second Trial Third Trial

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

26-07-'09

m - Moisture Content, %
Dung trng t - Wet Density, g/cm

Dung trng kh - Dry Density, g/cm 3


ng sut chnh - Normal stress, kG/cm

Giai on ct
Shear Stage

CC4

28.18

23.21

23.87

1.99

2.05

1.99

1.55

1.67

1.61

0.50

1.00

2.00

0.24

0.47

0.87

Chuyn v ngang - Hor. Displacement, mm

5.88

2.48

5.49

ln - Settlement, mm

0.30

0.15

0.34

25.7

21.3

21.3

1.95

2.02

1.95

1.55

1.67

1.61

ng sut ct - Max. shear stress, kG/cm

Sc khng ct Gc ma st trong - Internal Friction Angle


Shear Strength
Lc dnh - Cohesion C, kG/cm 2

2251
0.033
0.40
C.v ng - Ver. Disp, mm

1.00
0.90
0.80
0.70
0.60

0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.00

0.50
0.40
0.30

2.00
4.00
6.00
8.00
C.v ngang - Hor. Disp, mm

10.00

1.00

0.20
0.10

2.00

4.00

6.00

8.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

10.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

26-07-'09

m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3

0.00
0.00

26-07-'09

0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0.00

0.50

1.00

1.50

ng sut chnh - Normal Stresses, kG/cm 2

2.00

Ph lc - Appendix 6.2
T - Sheet 8

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST


Cong trnh - Project

KHU LIEN HP GANG THEP & CANG SN DNG FORMOSA HA TNH

So hieu mau - Sample No.

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
C5-S10

o sau - Depth, m
Chieu cao mau - Initial Height, mm
ng knh mau - Diameter, mm

15.45
20.0
61.8

He so ch.v ng - Ver.disp.trans. Factor, mm/V


He so ch.v ngang - Hor.disp.trans. Factor, mm/V

Sau co ket
After consolidation

Mau th 1

Mau th 2

Mau th 3

First Trial

Second Trial

Third Trial

20-10-'08

ng suat cat - Max. shear stress, kG/cm 2


Chuyen v ngang - Hor. Displacement, mm
o lun - Settlement, mm
o am - Moisture Content, %
Dung trong t - Wet Density, g/cm 3
Dung trong kho - Dry Density, g/cm 3
Goc ma sat trong - Internal Friction Angle
Lc dnh - Cohesion c, kG/cm 2

Shear Stage

Sau th nghiem
After test
Sc khang cat
Shear Strength

21-10-'08

13.68
2.23

13.68
2.23

1.96

1.96

1.96

0.50
0.68
19.32
2.03
0.50

1.00
0.84
19.16
2.05
1.00

2.00
0.99
19.01
2.06
2.00

0.31
3.95
0.11
12.12
2.28
2.03

0.54
3.61
0.21
11.49
2.29
2.05

1.04
5.19
0.15
10.99
2.30
2.07

2603

0.062
0.25
Chuyen v ng - Ver. Disp., mm

1.20
1.05
0.90
0.75
0.60

0.20
0.15
0.10
0.05

0.45
0.00

0.30

2
3
4
5
6
7
Chuyen v ngang - Hor. Disp., mm

0.15
0.00
0

Chuyen v ngang - Hor. Disp., mm

ng suat cat - Shear Stress, kG/cm2

2
ng suat cat - Shear Stress, kG/cm

21-10-'08

13.68
2.23

o am - Moisture Content, %
Dung trong t - Wet Density, g/cm 3
Dung trong kho - Dry Density, g/cm 3
Ap lc co ket - Consolidation pressure, kG/cm 2
o lun - Settlement, mm
Chieu cao mau - Height, mm
Dung trong kho - Dry Density, g/cm 3
ng suat chnh - Normal stress, kG/cm 2

Giai oan cat

50.9575

He so cam bien o lc - Loadcell Factor, kG/mV

Mau th - Specimen
Ngay TN - Tested Date
Ban au
Initial

-2.1438
-2.6686

1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.0

0.5

1.0

1.5

Cac ng suat chnh - Principal Stresses, kG/cm2

2.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation

Ph lc - Appendix 6.2

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

T - Sheet 9

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :


su - Depth, m :

L4 - T1

H khoan - Borehole No:

15.3 - 16.05

L4

H.s c.bin c.v ng - Ver.disp.trans. Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

Mu 1
First Trial

Mu 2
Second Trial

Mu 3
Third Trial

08-08-'09

08-08-'09

08-08-'09

m - Moisture Content, %
Dung trng t - Wet Density, g/cm

Dung trng kh - Dry Density, g/cm 3


ng sut chnh - Normal stress, kG/cm

2
2

Giai on ct ng sut ct - Max. shear stress, kG/cm


Shear Stage Chuyn v ngang - Hor. Displacement, mm
ln - Settlement, mm
m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3

24.36

14.42

23.87

2.02

2.15

1.99

1.62

1.88

1.61

0.50

1.00

2.00

0.47

0.61

1.29

2.17

2.17

4.33

0.15

0.08

0.06

23.1

17.5

21.3

2.00

2.21

1.95

1.62

1.88

1.61

Sc khng ct Gc ma st trong - Internal Friction Angle


Shear Strength
Lc dnh - Cohesion C, kG/cm 2

2920
0.136
0.18
C.v ng - Ver. Disp, mm

1.40

1.00

0.80

0.60

0.40

0.12
0.10
0.08
0.06
0.04
0.02
2.00
4.00
6.00
C.v ngang - Hor. Disp, mm

8.00

1.50

0.20

0.00
0.00

0.14

0.00
0.00

2.00

4.00

6.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

8.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

1.20

0.16

1.25
1.00
0.75
0.50
0.25
0.00
0.00

0.25

0.50

0.75

1.00

1.25

1.50

1.75

ng sut chnh - Normal Stresses, kG/cm 2

2.00

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation

Ph lc - Appendix 6.2

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

T - Sheet 10

TH NGHIM CT TRC TIP - DIRECT SHEAR TEST


(THEO TIU CHUN ASTM D3080 - ACCORDING ASTM D3080)

Cng trnh: Khu Lin Hp Gang Thp v Cng Sn Dng Formosa H Tnh
Project

The Integrated Steel Mill & Son Duong Port Formosa Ha Tinh

S hiu mu - Sample No. :

L7 - T2

su - Depth, m :

H khoan - Borehole No:

L7

15.3 - 16.05

H.s c.bin c.v ng - Ver.disp.trans. Factor, mm/V :

-2.643

C. cao mu - Initial Height, mm :

20.0

H.s c.bin c.v ngang - Hor.disp.trans. Factor, mm/V

-2.752

ng knh - Diameter, mm :

61.8

H.s c.bin lc - Loadcell Factor, kG/mV :

58.297

Mu th - Specimen
Ngy th nghim - Tested Date
Ban u
Initial

m - Moisture Content, %
Dung trng t - Wet Density, g/cm

Mu 1
First Trial

Mu 2
Second Trial

Mu 3
Third Trial

25/7/2009

25/7/2009

25/7/2009

27.86

26.11

23.87

2.04

2.05

1.99

1.59

1.63

1.61

0.50

1.00

2.00

0.36

0.57

1.10

2.48

1.24

2.17

0.17

0.07

0.05

25.8

27.8

21.3

2.01

2.08

1.95

1.59

1.63

1.61

Dung trng kh - Dry Density, g/cm 3


ng sut chnh - Normal stress, kG/cm

2
2

Giai on ct ng sut ct - Max. shear stress, kG/cm


Shear Stage Chuyn v ngang - Hor. Displacement, mm
ln - Settlement, mm
m - Moisture Content, %
Sau th nghim
Dung trng t - Wet Density, g/cm 3
After test
Dung trng kh - Dry Density, g/cm 3
Sc khng ct Gc ma st trong - Internal Friction Angle
Shear Strength
Lc dnh - Cohesion C, kG/cm 2

2628
0.091
0.18
C.v ng - Ver. Disp, mm

1.20

0.80

0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
0.00

0.60

2.00
4.00
6.00
8.00
C.v ngang - Hor. Disp, mm

10.00

0.40
1.20
0.20

0.00
0.00

2.00

4.00

6.00

8.00

C.v ngang - Hor. Disp, mm

Ch thch - Legends:
Mu 01 -The First Trial
Mu 02 -The Second Trial
Mu 03 - The Third Trial

10.00

ng sut ct - Shear Stress, kG/cm2

ng sut ct - Shear Stress, kG/cm2

1.00

0.16

1.00
0.80
0.60
0.40
0.20
0.00
0.00

0.50

1.00

1.50

ng sut chnh - Normal Stresses, kG/cm 2

2.00

APPENDIX 6.3: UNCONFINED COMPRESSION TEST (Qu)


RESULTS
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Ph lc - Appendix 6.3
Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation
Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

BNG TNG HP KT QU TH NGHIM NN N HNG


SUMMARY OF UNCONFINED COMPESSION TEST RESULT
Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

STT
No.

S hiu mu
Sample No.

su Depth,
m

Ngy th
nghim
Test date

m,
Moisture
content %

Dung trng t
Wet
Density,T/m3

Sc khng nn
Unconfined compressive
strength Qu, kPa

Lp Layer

A6 - T1

11.2 - 12.4

25/07/2008

36.1

1.85

87.9

2b

A3 - S5

7.05 - 7.50

08/11/08

25.2

2.05

243.3

A10 - T1

9.50 - 10.3

10/10/08

19.5

2.08

122.5

L5 - T1

13.8 - 14.58

25/07/2009

10.4

2.14

233.1

L4 - T2

18.3 - 19.05

25/07/2009

16.6

2.10

61.2

L1

Ph lc - Appendix 6.3

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet 1

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM NN N HNG - UNCONFINED COMPRESSION TEST


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
0.12

S hiu mu - Sample No

A3 - S5

S hiu LK No.

A3 -

su - Depth, m.

7.05-7.50

Ngy th nghim - Tested Date

8/11/2008

Ngi th nghim - Tested by.

Phm Duy Khnh

m - Moisture Content %

25.24

2.80
0.10

2.049

Dung trng kh - Dry Density, g/cm

1.636

Chiu cao mu - Initial Height, mm

70.0

ng knh mu - Diameter, mm

36.0

Tit din mu - Area, cm

Stress, kG/cm2

ng sut - Stress, kG/cm2

Dung trng t - Wet Density, g/cm

2.33
1.87
1.40
0.93
0.47

0.08

0.06

0.04

0.02

0.00
0.0

0.00
-1
3.0

6.0

9.0

12.0

13

15.0

10.18
Sc khng nn - Unconfined Compressive Strength q u, kG/cm2

2.433

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, Kg

ng sut
2
Stress, kG/cm

0.000

0.00

10.18

0.000

0.000

0.719

1.03

10.28

6.207

0.604

1.422

2.03

10.39

9.788

0.942

2.021

2.89

10.48

12.652

1.207

2.699

3.86

10.59

15.756

1.488

3.398

4.85

10.70

18.381

1.718

4.144

5.92

10.82

20.530

1.898

4.889

6.98

10.94

22.440

2.051

5.649

8.07

11.07

24.111

2.178

6.362

9.09

11.20

25.543

2.281

7.012

10.02

11.31

26.498

2.342

7.745

11.06

11.45

27.692

2.420

8.450

12.07

11.58

28.169

2.433

9.146

13.07

11.71

28.408

2.426

9.891

14.13

11.85

28.169

2.376

10.649

15.21

12.01

26.737

2.227

Kiu ph hoi - Type of Failure

20
18.0

Bin dng Strain,


- Strain,%%

M t - Description

St na cng mu xm vng, xm nu
Very stiff clay yellowish grey reddish brown

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing

Ph lc - Appendix 6.3
T - sheet 2

TH NGHIM NN N HNG - UNCONFINED COMPRESSION TEST


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A6-T1

S hiu LK No.

A6

su - Depth, m.

11.2-12.4

90.00
90.0
75.00

25/07/2009

Ngi th nghim - Tested by.

Nguyn Huy Khnh

m - Moisture Content initial, %

36.1

Dung trng t - Wet Density, T/m3

1.85

Dung trng kh - Dry Density, T/m3

1.36

60.0

45.0

Stress, kG/cm2

Ngy th nghim - Tested Date

ng sut - Stress, kPa

75.0
60.00

45.00

30.00

30.0
15.00
15.0

Chiu cao mu - Initial Height, mm

100.0

ng knh mu - Diameter, mm

50.0

Tit din mu - Area, cm2

19.63

0.00
0

0.0
0.0

3.3

3
6.7

10

13

Strain, %
10.0
13.3

17
16.7

87.9

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, Kg

0.000

0.00

19.63

0.000

0.0

0.326

0.33

19.70

3.052

15.5

0.652

0.65

19.76

5.086

25.7

0.920

0.92

19.82

6.539

33.0

1.246

1.25

19.88

8.572

43.1

1.611

1.61

19.96

10.752

53.9

1.917

1.92

20.02

12.207

61.0

2.169

2.17

20.07

13.806

68.8

2.475

2.48

20.13

15.257

75.8

2.763

2.76

20.19

16.129

79.9

3.147

3.15

20.27

16.855

83.1

3.395

3.40

20.33

17.871

87.9

3.760

3.76

20.40

17.728

86.9

4.09

4.09

20.47

17.147

83.8

4.37

4.37

20.53

16.275

79.3

4.74

4.74

20.61

15.548

75.4

5.10

5.10

20.69

15.402

74.4

5.49

5.49

20.77

14.386

69.2

5.75

5.75

20.83

13.658

65.6

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

20.0

Bin dng - Strain, %

Sc khng nn - Unconfined Compressive Strength q u, kPa

Bulge

20

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

ng sut
Stress, kPa

Ph lc - Appendix 6.3

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet 3

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM NN N HNG - UNCONFINED COMPRESSION TEST


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
0.12

S hiu mu - Sample No

A10 - T1

S hiu LK No.

A10

su - Depth, m.

9.50-10.3

Ngy th nghim - Tested Date

10/10/2008

Ngi th nghim - Tested by.

Phm Duy Khnh

m - Moisture Content %

19.48

1.30
0.10

2.082

Dung trng kh - Dry Density, g/cm

1.742

Chiu cao mu - Initial Height, mm

76.0

ng knh mu - Diameter, mm

38.0

Tit din mu - Area, cm

Stress, kG/cm2

ng sut - Stress, kG/cm2

Dung trng t - Wet Density, g/cm

1.08
0.87
0.65
0.43
0.22

0.08

0.06

0.04

0.02

0.00
0.0

0.00
-1
3.0

6.0

9.0

12.0

13

15.0

11.34
Sc khng nn - Unconfined Compressive Strength q u, kG/cm2

1.225

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, Kg

ng sut
2
Stress, kG/cm

0.000

0.00

11.34

0.000

0.000

0.453

0.60

11.41

1.194

0.105

0.907

1.19

11.48

3.820

0.333

1.332

1.75

11.54

6.923

0.600

1.763

2.32

11.61

9.310

0.802

2.144

2.82

11.67

10.742

0.920

2.510

3.30

11.73

12.175

1.038

2.901

3.82

11.79

12.891

1.093

3.341

4.40

11.86

13.846

1.167

3.811

5.01

11.94

14.323

1.200

4.270

5.62

12.02

14.562

1.212

4.676

6.15

12.08

14.801

1.225

5.048

6.64

12.15

14.801

1.218

5.446

7.17

12.22

14.801

1.212

5.842

7.69

12.29

14.562

1.185

6.289

8.28

12.36

14.562

1.178

6.762

8.90

12.45

14.323

1.151

7.598

10.00

12.60

13.368

1.061

8.371

11.01

12.74

12.175

0.955

9.230

12.15

12.91

11.459

0.888

10.140

13.34

13.09

9.788

0.748

10.885

14.32

13.24

7.878

0.595

11.722

15.42

13.41

6.684

0.498

Kiu ph hoi - Type of Failure

20
18.0

Bin dng Strain,


- Strain,%%

M t - Description

St do cng mu xm vng, xm nu
Stiff clay yellowish grey reddish brown

Ph lc - Appendix 6.3
T - sheet 4

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing

TH NGHIM NN N HNG - UNCONFINED COMPRESSION TEST


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

L4-T2

S hiu LK No.

L4

su - Depth, m.

18.3-19.05

0.12
72.0
0.10

25/07/2009

Ngi th nghim - Tested by.

Nguyn Huy Khnh

m - Moisture Content initial, %

16.6

Dung trng t - Wet Density, T/m3

2.10

Dung trng kh - Dry Density, T/m3

1.80

48.0

36.0

Stress, kG/cm2

Ngy th nghim - Tested Date

ng sut - Stress, kPa

60.0
0.08

0.06

0.04

24.0
0.02
12.0

Chiu cao mu - Initial Height, mm

144.0

ng knh mu - Diameter, mm

72.0

Tit din mu - Area, cm2

40.72

0.00
0

0.0
0.0

3.3

6.7

10

Strain,13.3
%
10.0

16.7

Bin dng - Strain, %

Sc khng nn - Unconfined Compressive Strength q u, kPa

61.2

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, Kg

0.000

0.00

40.72

0.000

0.0

0.555

0.39

40.87

4.213

10.3

0.997

0.69

41.00

7.556

18.4

1.420

0.99

41.12

12.061

29.3

1.956

1.36

41.28

16.276

39.4

2.514

1.75

41.44

19.472

47.0

2.973

2.06

41.57

21.797

52.4

3.453

2.40

41.72

24.412

58.5

3.951

2.74

41.86

25.430

60.7

4.412

3.06

42.00

25.575

60.9

4.835

3.36

42.13

25.719

61.0

5.371

3.73

42.29

25.867

61.2

5.774

4.01

42.42

25.719

60.6

6.29

4.37

42.58

24.558

57.7

6.89

4.78

42.76

22.378

52.3

7.29

5.06

42.89

20.490

47.8

7.71

5.35

43.02

18.019

41.9

8.19

5.69

43.17

15.839

36.7

8.25

5.73

43.19

12.498

28.9

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

20.0

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

ng sut
Stress, kPa

Ph lc - Appendix 6.3
T - sheet 5

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing

TH NGHIM NN N HNG - UNCONFINED COMPRESSION TEST


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

L5-T1

S hiu LK No.

L5

su - Depth, m.

13.8-14.58

240.00
240.0
200.00

25/07/2009

Ngi th nghim - Tested by.

Nguyn Huy Khnh

m - Moisture Content initial, %

10.4

Dung trng t - Wet Density, T/m3

2.14

Dung trng kh - Dry Density, T/m3

1.94

160.0

120.0

Stress, kG/cm2

Ngy th nghim - Tested Date

ng sut - Stress, kPa

200.0
160.00

120.00

80.00

80.0
40.00
40.0

Chiu cao mu - Initial Height, mm

144.0

ng knh mu - Diameter, mm

71.5

Tit din mu - Area, cm2

40.15

0.00
0

0.0
0.0

3.3

6.7

10

13

Strain, %
10.0
13.3

17
16.7

233.1

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, Kg

0.000

0.00

40.15

0.000

0.0

1.075

0.75

40.45

9.882

18.8

2.340

1.63

40.81

15.985

39.2

3.567

2.48

41.17

23.105

56.1

4.700

3.26

41.51

30.659

73.9

5.832

4.05

41.85

39.234

93.8

7.117

4.94

42.24

48.532

114.9

8.307

5.77

42.61

57.688

135.4

ng sut
Stress, kPa

9.573

6.65

43.01

66.406

154.4

10.838

7.53

43.42

74.834

172.4

11.932

8.29

43.78

82.098

187.5

13.217

9.18

44.21

88.784

200.8

14.427

10.02

44.62

94.596

212.0

15.73

10.92

45.08

98.664

218.9

17.05

11.84

45.55

102.007

224.0

18.42

12.79

46.04

104.476

226.9

19.74

13.71

46.53

106.512

228.9

20.93

14.54

46.98

107.528

228.9

22.16

15.39

47.45

109.707

231.2

23.43

16.27

47.95

113.922

233.1

24.63

17.11

48.44

111.887

231.0

25.84

17.95

48.93

108.835

222.4

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

20.0

Bin dng - Strain, %

Sc khng nn - Unconfined Compressive Strength q u, kPa

Bulge

20

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

APPENDIX 6.4: TRIAXIAL COMPRESSION TEST (CU) RESULTS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Cng ty C Phn TVTK Cng - K Thut Bin - PortCoast Consultant

Ph lc -Appendix 6.4

Phng a K Thut v Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM NN BA TRC (CU)


SUMMARY OF TRIAXIAL TEST (CU)
Cng trnh - project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
Tiu chun - Specification: (ASTM D4767-95)
Gi tr ton phn - Total
STT
No.
1
2
3
4
5
6
7
8

SH mu Sample
no.
A6-T1
A10-T1
A15-T1
B3-T1
B5-T1
B7-T1
BB9-T1
B12-T1

su
Depth (m)
11.20 - 12.40
9.50 - 10.30
9.6 - 10.50
8.20 - 8.90
9.6 - 10.00
3.70 - 4.60
11.30 - 12.10
5.00 - 5.80

Gi tr c hiu - Effective

Lp

Gc ma st trong Gc ma st trong Lc dnh Lc dnh 2 Internal Friction Angle


2 Internal Friction Angle Layer
Cohesion, kG/cm
Cohesion, kG/cm

0.402
1.053
0.779
0.350
0.836
0.117
0.271
0.056

1453
1404
1658
1235
1914
1347
1236
2421

0.525
0.601
0.320
0.280
0.698
0.083
0.155
0.357

2119
2534
2813
2059
2559
2305
2426
2947

2b
4
2b
2
4
2b
4
2b

Ph lc - Appendix 6.4
T - Sheet 1

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

A6-T1-06

S hiu LK - Boring No.

S th nghim - Procedure

A6-T1

su - Depth, m
Ngi TN - Tested by

11.2-12.4
Thinh

CU

Chiu cao mu - Initial Height, mm

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


20-07-09
21-07-'09
22-07-'09
38.5
37.2
38.5

Mu th - Specimen
Ngy TN - Tested Date
Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

1.84

1.87

1.84

Dung trng kh - Dry Density, g/cm 3

1.33

1.36

1.33

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

35.2

34.8

35.2

1.95

1.94

1.96

Dung trng kh - Dry Density, g/cm 3

1.44

1.44

1.45

Giai on bo ha

p lc NLR - P.W.P, kG/cm 2

0.00

0.00

0.00

Saturated Stage

p lc NLR b.ha - Saturated P.W.P, kG/cm 2

1.99

2.43

2.48

p lc nguc - Back pressure, kG/cm 2

2.00

2.5

2.5

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

Sau th nghim
After test

Giai on c kt

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

p lc NLR kt thc - Final P.W.P, kG/cm 2


Giai on nn

p lc bung - Cell pressure, kG/cm

2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

p lc ban u - Initial 3, kG/cm

Tc bin dng - Rate of Strain, mm/min

3.0

4.5

5.5

2.00

2.50

2.50

2.97

4.46

5.58

2.00

2.46

2.61

3.00

4.50

5.50

2.00

2.46

2.61

1.00

2.04

2.89

0.283

0.171

0.096

Trng thi ph hu

Bin dng - Strain, %

3.4

3.4

4.0

Failure Conditions

lch ng sut - Deviator stress, kPa

1.747

2.429

3.054

'3f, kG/cm2

0.163
1.910

0.833
3.262

1.298
4.352

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm2/s

0.835

1.207

1.587

3.82E-04

2.31E-04

1.30E-04

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

5.52E-02

3.22E-02

2.86E-02

Parameters

2.07E-08

7.30E-09

3.67E-09

Sc khng ct

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1453'

'

2119'

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.402

c'

0.525

ng suat cat - Shear Stress, kG/cm

4.0

3.0

2.0

1.0

0.0
0.0

1.0

2.0

3.0

4.0

5.0

6.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

7.0

8.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 2

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)

Mu - Specimen

A6-T1-06

su - Depth, m

Mu th 1 - First Trial

Ngy TN - Tested Date


Chiu di - Length,cm

11.2-12.4

Mu th 2 - Second Trial

20-07-'09

Mu th 3 - Third Trial

21-07-'09

7.60

7.46

7.60

7.44

7.60

7.38

Tit din - Area, cm2

11.34

10.94

11.34

10.86

11.34

10.70

Th tch - Volume, cm3

86.19

81.63

86.19

80.73

86.19

79.01

24.8

39.50

40.9

65.21

72.5

115.53

T 100, min

Tf, min

Vf, mm/min

0.283

'3 Eff. Pressure, ksc


Thi gian
Time t,
min
0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240
360
480
720
960

1.00
Th tch, cm3

t, min
0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49

AL NLR

Th tch, cm3

0.171

0.096

2.00

3.00

AL NLR

00-01-'00

Th tch

AL NLR

10

15

20

25

30

35

0
1
2
Vol.Ch.

S hiu LK - Boring No

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TIN

3
4
5
6

Th tch

AL NLR

Volume
Volume
Volume8
Volume
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
2.97
0.00
4.46
0.00
5.58
0.41
2.95
0.39
4.42
0.46
5.57
0.72
2.87
0.57
4.38
0.56
5.54
1.01
2.77
0.79
4.33
0.72
5.51
6.0
1.41
2.68
1.12
4.25
1.07
5.44
5.5
2.16
2.58
1.86
4.07
1.83
5.23
5.0
2.92
2.51
2.71
3.81
2.67
4.89
4.5
3.46
2.44
3.30
3.55
3.21
4.54
4.0
4.21
2.14
4.28
2.99
4.18
3.76
3.5
4.54
2.02
4.99
2.63
5.19
3.28
3.0
4.60
2.00
5.26
2.53
5.75
3.05
2.5
4.62
2.00
5.40
2.49
6.10
2.91
2.0
5.54
2.46
6.50
2.78
1.5
6.72
2.71
1.0
6.96
2.67
0.1
7.08
2.65
7.23
2.64
7.32
2.61

SQRT(T)
A

P.W.P

Cng trnh - Project

10

100

Log (t)

1000

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 3

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A6-T1-06
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
20-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
10.94
Tc ct - Rate
0.283 mm/min.
p lc nc l rng - Initial Pore Pressure

4.995
4.981
4.967
4.952
4.938
4.923
4.912
4.894
4.878
4.864
4.851
4.834
4.821
4.806
4.793
4.777
4.761
4.747
4.731
4.719
4.701
4.687
4.672
4.661
4.642
4.628
4.614
4.599
4.587
4.570
4.555

0.00
0.50
0.96
1.47
1.94
2.46
2.83
3.43
3.98
4.48
4.91
5.47
5.93
6.44
6.87
7.43
7.96
8.45
8.98
9.38
10.00
10.49
10.98
11.35
12.00
12.49
12.97
13.46
13.89
14.47
14.98

cm

p lc bung - Cell pressure

0.68
1.31
1.53
1.60
1.63
1.69
1.71
1.74
1.74
1.75
1.74
1.73
1.73
1.72
1.72
1.72
1.72
1.72
1.73
1.73
1.75
1.75
1.75
1.74
1.76
1.76
1.78
1.79
1.80
1.82
1.81

0.00
11.81
15.87
17.18
17.76
18.92
19.21
19.79
19.79
19.93
19.79
19.64
19.64
19.50
19.35
19.35
19.35
19.35
19.64
19.64
19.93
20.08
20.08
19.79
20.22
20.22
20.51
20.80
20.95
21.24
21.09

3.00

2.00
2.40
2.54
2.63
2.68
2.77
2.79
2.84
2.87
2.87
2.89
2.92
2.92
2.93
2.96
2.97
2.98
2.97
2.98
2.98
2.97
2.98
2.98
2.98
2.99
2.98
2.97
2.98
2.96
2.98
2.98

0.00
0.39
0.53
0.63
0.68
0.77
0.79
0.83
0.87
0.87
0.89
0.92
0.92
0.93
0.95
0.96
0.97
0.96
0.98
0.97
0.96
0.97
0.98
0.98
0.99
0.98
0.96
0.97
0.95
0.97
0.97

10.936
10.990
11.042
11.099
11.152
11.211
11.255
11.324
11.389
11.449
11.501
11.569
11.626
11.688
11.742
11.814
11.881
11.945
12.015
12.068
12.150
12.218
12.285
12.336
12.427
12.496
12.565
12.637
12.700
12.785
12.862

0.000
1.075
1.438
1.548
1.592
1.687
1.707
1.747
1.737
1.741
1.720
1.698
1.690
1.668
1.648
1.638
1.629
1.620
1.635
1.628
1.641
1.643
1.634
1.604
1.627
1.618
1.632
1.646
1.649
1.661
1.640

1.00
1.68
1.90
1.92
1.91
1.92
1.92
1.91
1.86
1.87
1.83
1.78
1.77
1.74
1.69
1.67
1.65
1.65
1.65
1.65
1.67
1.67
1.65
1.62
1.63
1.63
1.67
1.67
1.69
1.69
1.66

1.00
0.60
0.46
0.37
0.32
0.23
0.21
0.16
0.13
0.13
0.11
0.08
0.08
0.07
0.04
0.03
0.02
0.03
0.02
0.02
0.03
0.02
0.02
0.02
0.01
0.02
0.03
0.02
0.04
0.02
0.02

1.00
2.78
4.10
5.17
6.03
8.38
9.17
11.72
14.79
14.82
16.93
22.22
22.12
24.49
39.33
49.18
66.15
48.65
103.18
66.11
49.25
66.73
103.14
101.25
233.48
102.14
49.01
66.85
39.36
67.45
66.60

1.00
1.14
1.18
1.14
1.11
1.07
1.06
1.04
0.99
1.00
0.97
0.93
0.92
0.91
0.87
0.85
0.84
0.84
0.83
0.84
0.85
0.85
0.83
0.82
0.82
0.83
0.85
0.85
0.87
0.86
0.84

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading mV

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.46

'1
kPa

C.cao mu - Specimen height

-25.369
-0.1863
1.00
2.00

0.00
0.54
0.72
0.77
0.80
0.84
0.85
0.87
0.87
0.87
0.86
0.85
0.84
0.83
0.82
0.82
0.81
0.81
0.82
0.81
0.82
0.82
0.82
0.80
0.81
0.81
0.82
0.82
0.82
0.83
0.82

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 4

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A6-T1-06
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
21-07-'09
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.86
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.171 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.855
10.904
10.965
11.020
11.076
11.132
11.189
11.242
11.302
11.364
11.425
11.481
11.546
11.604
11.669
11.729
11.798
11.857
11.926
11.991
12.060
12.126
12.194
12.265
12.333
12.402
12.476
12.547
12.622
12.692
12.769
12.841
12.919
12.999
13.073
13.155
13.237
13.314
13.399

1.00
2.27
2.79
3.15
3.41
3.58
3.78
3.92
4.00
4.11
4.17
4.19
4.21
4.28
4.31
4.33
4.34
4.35
4.35
4.37
4.36
4.36
4.35
4.33
4.33
4.30
4.29
4.25
4.23
4.20
4.15
4.14
4.13
4.12
4.03
4.03
3.95
3.93
3.86

2.04
2.28
2.14
2.12
2.09
2.07
2.06
2.05
2.02
2.00
1.97
1.95
1.92
1.89
1.86
1.83
1.81
1.79
1.76
1.74
1.71
1.69
1.66
1.64
1.62
1.60
1.57
1.55
1.53
1.51
1.49
1.47
1.45
1.43
1.41
1.39
1.37
1.35
1.34

kG/cm

t'= ('1-'3)/2

2.04
1.40
1.13
1.02
0.95
0.90
0.86
0.83
0.81
0.78
0.76
0.75
0.74
0.72
0.70
0.69
0.68
0.67
0.66
0.65
0.64
0.63
0.62
0.61
0.61
0.60
0.59
0.59
0.59
0.58
0.58
0.57
0.57
0.56
0.56
0.55
0.55
0.55
0.55

2.04
3.17
3.15
3.22
3.23
3.23
3.25
3.26
3.23
3.21
3.18
3.14
3.10
3.07
3.02
2.98
2.94
2.91
2.86
2.83
2.78
2.75
2.71
2.66
2.63
2.60
2.55
2.51
2.48
2.44
2.40
2.37
2.34
2.30
2.25
2.23
2.18
2.16
2.12

kG/cm

0.000
1.771
2.019
2.194
2.284
2.329
2.393
2.429
2.420
2.429
2.420
2.391
2.365
2.353
2.319
2.291
2.261
2.238
2.204
2.180
2.139
2.116
2.084
2.047
2.025
1.993
1.958
1.916
1.893
1.861
1.822
1.796
1.774
1.741
1.693
1.679
1.631
1.611
1.572

s'= ('1+'3)/2

'3
kPa

0.00
0.64
0.91
1.02
1.09
1.14
1.18
1.21
1.23
1.26
1.28
1.29
1.30
1.32
1.34
1.35
1.36
1.37
1.38
1.39
1.40
1.41
1.42
1.42
1.43
1.44
1.44
1.45
1.45
1.46
1.46
1.47
1.47
1.48
1.48
1.49
1.49
1.49
1.49

T.din hiu chnh


2
Corr. A cm

2.46
3.10
3.37
3.48
3.55
3.60
3.64
3.67
3.69
3.72
3.74
3.75
3.76
3.78
3.80
3.81
3.82
3.83
3.84
3.85
3.86
3.87
3.88
3.89
3.89
3.90
3.91
3.91
3.91
3.92
3.92
3.93
3.93
3.94
3.94
3.95
3.95
3.95
3.95

'1
kPa

0.00
19.31
22.14
24.18
25.30
25.92
26.77
27.31
27.35
27.60
27.65
27.45
27.31
27.31
27.06
26.87
26.67
26.54
26.29
26.14
25.80
25.65
25.41
25.11
24.97
24.72
24.43
24.04
23.89
23.62
23.26
23.06
22.92
22.63
22.13
22.08
21.59
21.45
21.06

4.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.60
0.76
0.79
0.80
0.81
0.82
0.82
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.82
0.82
0.82
0.82
0.82
0.82
0.81
0.81
0.81
0.81
0.81
0.80
0.80
0.80
0.80
0.80
0.79
0.79
0.79
0.79
0.79
0.78
0.78
0.78

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.44
1.00
1.50
1.99
2.48
2.99
3.44
3.95
4.47
4.98
5.45
5.98
6.46
6.98
7.45
7.99
8.45
8.98
9.47
9.99
10.48
10.98
11.50
11.99
12.47
12.99
13.48
14.00
14.47
14.99
15.46
15.98
16.49
16.97
17.48
17.99
18.47
18.98

cm

p lc NLR
Pore Pressure
2
kG/cm

1.165
1.285
1.434
1.569
1.702
1.835
1.971
2.093
2.231
2.372
2.510
2.636
2.779
2.907
3.047
3.175
3.320
3.444
3.588
3.720
3.861
3.992
4.128
4.266
4.399
4.529
4.670
4.803
4.941
5.070
5.208
5.337
5.475
5.614
5.742
5.881
6.019
6.148
6.286

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.44

'1/'3

C.cao mu - Specimen height

-2.757
-1.2152
2.04
2.46

0.00
0.89
1.01
1.10
1.14
1.16
1.20
1.21
1.21
1.21
1.21
1.20
1.18
1.18
1.16
1.15
1.13
1.12
1.10
1.09
1.07
1.06
1.04
1.02
1.01
1.00
0.98
0.96
0.95
0.93
0.91
0.90
0.89
0.87
0.85
0.84
0.82
0.81
0.79

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 5

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A6-T1-06
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
00-01-'00
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.70
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.096 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.699
10.750
10.806
10.859
10.917
10.973
11.029
11.086
11.144
11.196
11.262
11.317
11.379
11.437
11.503
11.565
11.627
11.692
11.755
11.818
11.883
11.953
12.019
12.088
12.157
12.227
12.296
12.367
12.440
12.513
12.584
12.659
12.735
12.812
12.889
12.968
13.044
13.125

1.00
1.88
2.26
2.51
2.75
2.94
3.10
3.22
3.35
3.43
3.51
3.56
3.60
3.65
3.69
3.71
3.74
3.77
3.77
3.80
3.80
3.81
3.81
3.83
3.84
3.83
3.83
3.84
3.80
3.83
3.82
3.79
3.78
3.70
3.69
3.64
3.64
3.59

2.89
3.45
3.31
3.18
3.09
3.01
2.93
2.89
2.83
2.77
2.71
2.67
2.62
2.58
2.54
2.51
2.47
2.43
2.40
2.38
2.35
2.33
2.30
2.27
2.25
2.22
2.21
2.17
2.15
2.14
2.11
2.10
2.08
2.09
2.06
2.05
2.04
2.03

kG/cm

t'= ('1-'3)/2

2.89
2.39
2.03
1.81
1.65
1.53
1.43
1.37
1.30
1.25
1.20
1.17
1.14
1.11
1.08
1.07
1.04
1.02
1.01
0.99
0.98
0.97
0.96
0.94
0.93
0.92
0.92
0.90
0.90
0.89
0.88
0.88
0.87
0.89
0.88
0.88
0.88
0.88

2.89
4.50
4.59
4.55
4.54
4.49
4.43
4.40
4.35
4.29
4.22
4.17
4.10
4.05
4.00
3.96
3.89
3.84
3.80
3.77
3.72
3.69
3.64
3.60
3.57
3.52
3.51
3.45
3.40
3.39
3.35
3.32
3.29
3.29
3.24
3.22
3.20
3.17

kG/cm

0.000
2.110
2.560
2.742
2.889
2.964
3.000
3.035
3.054
3.042
3.019
2.998
2.963
2.942
2.919
2.891
2.851
2.823
2.790
2.775
2.743
2.721
2.688
2.659
2.640
2.602
2.593
2.550
2.508
2.509
2.472
2.440
2.421
2.401
2.365
2.332
2.320
2.290

s'= ('1+'3)/2

'3
kPa

0.00
0.49
0.85
1.08
1.24
1.36
1.45
1.52
1.59
1.63
1.68
1.71
1.75
1.78
1.80
1.82
1.85
1.86
1.88
1.89
1.90
1.92
1.93
1.94
1.96
1.97
1.97
1.99
1.99
2.00
2.01
2.01
2.02
2.00
2.01
2.00
2.01
2.00

T.din hiu chnh


2
Corr. A cm

2.61
3.11
3.47
3.69
3.85
3.97
4.07
4.13
4.20
4.25
4.30
4.33
4.36
4.39
4.42
4.43
4.46
4.48
4.49
4.51
4.52
4.53
4.54
4.56
4.57
4.58
4.58
4.60
4.60
4.61
4.62
4.62
4.63
4.61
4.62
4.62
4.62
4.62

'1
kPa

0.00
22.69
27.66
29.77
31.54
32.52
33.09
33.65
34.04
34.06
34.00
33.93
33.71
33.65
33.58
33.43
33.15
33.01
32.80
32.80
32.59
32.52
32.30
32.14
32.09
31.81
31.89
31.54
31.19
31.39
31.11
30.89
30.83
30.76
30.48
30.25
30.26
30.05

5.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.61
0.79
0.83
0.85
0.87
0.87
0.88
0.88
0.89
0.89
0.89
0.89
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.86
0.87
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.85

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.48
0.99
1.48
2.00
2.50
2.99
3.49
4.00
4.44
5.00
5.46
5.98
6.45
6.99
7.49
7.98
8.50
8.98
9.47
9.97
10.49
10.98
11.49
12.00
12.50
12.99
13.49
13.99
14.50
14.98
15.48
15.99
16.49
16.99
17.50
17.98
18.49

cm

p lc NLR
Pore Pressure
2
kG/cm

1.156
1.284
1.421
1.552
1.691
1.826
1.958
2.091
2.227
2.346
2.495
2.619
2.757
2.885
3.028
3.163
3.294
3.432
3.562
3.694
3.826
3.966
4.098
4.235
4.370
4.503
4.635
4.770
4.905
5.040
5.169
5.304
5.439
5.574
5.709
5.844
5.973
6.108

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.38

'1/'3

C.cao mu - Specimen height

-2.757
-1.2152
2.89
2.61

0.00
1.06
1.28
1.37
1.44
1.48
1.50
1.52
1.53
1.52
1.51
1.50
1.48
1.47
1.46
1.45
1.43
1.41
1.40
1.39
1.37
1.36
1.34
1.33
1.32
1.30
1.30
1.27
1.25
1.25
1.24
1.22
1.21
1.20
1.18
1.17
1.16
1.14

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 6

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu LK - Boring No.

A6-T1

S th nghim - Procedure

CIU

S hiu mu - Sample No.

A6-T1-06

Chiu cao mu - Initial height, cm

7.46;7.44

su - Depth, m

11.2-12.4

ng knh mu - Diameter, cm

3.73;3.72

3.50

Deviator stress, q, kg/cm

3.00
2.50
2.00
1.50
First Trial

1.00

Second Trial
Third Trial

0.50
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

14.0

16.0

18.0

20.0

2.40
2.00

u, kG/cm2

1.60
1.20
0.80

First Trial
Second Trial

0.40

Third Trial
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

Bien dang - Strain, %

4.0
First Trial

t'

3.0

Second Trial
Kf-line

2.0

Third Trial

1.0

0.0
0.0

1.0

2.0

3.0

4.0

s'

5.0

6.0

7.0

8.0

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.4
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 7

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

A10 - T1

S hiu LK - Boring No.

S th nghim - Procedure

A10

su - Depth, m
Ngi TN - Tested by

9.5-10.3
Thinh

Ngy TN - Tested Date


Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

After test
Giai on bo ha
Saturated Stage

Giai on c kt

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


25-10-08
26-10-'08
27-10-'08
19.2
19.9
18.9

Mu th - Specimen

Sau th nghim

2.03

2.04

2.05

Dung trng kh - Dry Density, g/cm 3

1.70

1.70

1.72

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

20.3

18.8

17.8

2.12

2.14

2.22

Dung trng kh - Dry Density, g/cm 3

1.76

1.81

1.88

p lc NLR - P.W.P, kG/cm 2

0.00

0.00

0.00

p lc NLR b.ha - Saturated P.W.P, kG/cm

2.47

2.48

2.48

p lc nguc - Back pressure, kG/cm 2

2.50

2.5

2.5

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

3.5

4.5

6.5

2.50

2.50

2.50

3.41

3.80

5.32

2.47

2.48

2.48

3.50

4.50

6.50

2.47

2.49

2.45

1.03

2.01

4.05

0.215

1.417

0.666

8.5

8.7

11.9

Consolidation Stage p lc nguc - Back pressure, kG/cm


p lc NLR ban u - Initial P.W.P, kG/cm 2
p lc NLR kt thc - Final P.W.P, kG/cm

p lc bung - Cell pressure, kG/cm 2

Giai on nn

Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

p lc ban u - Initial 3, kG/cm2


Tc bin dng - Rate of Strain, mm/min
Trng thi ph hu
Failure Conditions

CU

Chiu cao mu - Initial Height, mm

Bin dng - Strain, %


lch ng sut - Deviator stress, kPa

3.441

3.870

5.340

'3f, kG/cm2

0.780
4.221

1.292
5.162

2.260
7.600

0.249

0.721

1.793

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
2

Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm /s

2.89E-04

1.91E-03

9.09E-04

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

4.80E-02

4.19E-02

3.26E-02

Parameters

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1.36E-08

7.84E-08

2.91E-08

Sc khng ct

1404

'

2534

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

1.053

c'

0.601

ng suat cat - Shear Stress, kG/cm

6.0

4.5

3.0

1.5

0.0
0.0

1.5

3.0

4.5

6.0

7.5

9.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

10.5

12.0

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

Ph lc - Appendix 7.4
T - Sheet 8

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)

Mu - Specimen

A10 - T1

su - Depth, m

Mu th 1 - First Trial

Ngy TN - Tested Date


Chiu di - Length,cm

9.5-10.3

Mu th 2 - Second Trial

25-10-'08

26-10-'08

7.60

7.49

7.60

7.46

7.60

7.37

11.34

11.00

11.34

10.92

11.34

10.64

Th tch - Volume, cm3

86.19

82.34

86.19

81.48

86.19

78.37

32.8

52.23

5.0

7.90

10.4

16.59

Tf, min

Vf, mm/min

0.215

'3 Eff. Pressure, ksc


Thi gian
Time t,
min
0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240

1.00
Th tch, cm3

t, min
0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49

AL NLR

Th tch, cm3

1.417

0.666

2.00

4.00

AL NLR

27-10-'08

Tit din - Area, cm2


T 100, min

SQRT(T)

Mu th 3 - Third Trial

Th tch

AL NLR

10

20

30

40

50

1000

10000

0
1
2
3
Vol.Ch.

S hiu LK - Boring No

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TIN

4
5
6
7

Th tch

AL NLR

Volume
Volume
Volume
Volume
9
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
3.41
0.00
3.80
0.00
5.32
0.06
3.41
0.22
3.79
1.52
5.27
0.26
3.39
0.96
3.73
1.52
5.16
0.51
3.38
1.69
3.62
2.29
4.98
6.0
0.81
3.35
2.70
3.41
3.41
4.61
1.38
3.28
3.86
2.96
5.75
3.72
5.0
2.03
3.17
4.40
2.65
7.19
2.99
2.47
3.08
4.56
2.55
7.62
2.72
4.0
3.16
2.86
4.69
2.50
7.91
2.53
3.67
2.60
4.72
2.48
7.98
2.49
3.0
3.80
2.52
4.75
2.48
7.98
2.48
3.84
2.50
4.77
2.49
7.99
2.48
2.0
3.88
2.48
7.98
2.48
3.89
2.47
1.0

P.W.P

Cng trnh - Project

0.1

10

100
Log (t)

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.4
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 9

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A10 - T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
25-10-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
11.00
Tc ct - Rate
0.215 mm/min.
p lc nc l rng - Initial Pore Pressure

0.000
0.354
0.730
1.110
1.464
1.870
2.214
2.596
2.982
3.329
3.713
4.105
4.448
4.864
5.227
5.607
5.980
6.343
6.721
7.104
7.480
7.819
8.208
8.577
8.968
9.287
9.658
10.102
10.473
10.844
11.214
11.585
11.955
12.326
12.697
13.067
13.438
13.808
14.179
14.550

0.00
0.47
0.97
1.48
1.96
2.50
2.96
3.47
3.98
4.45
4.96
5.48
5.94
6.50
6.98
7.49
7.99
8.47
8.98
9.49
9.99
10.44
10.97
11.46
11.98
12.41
12.90
13.50
13.99
14.49
14.98
15.48
15.97
16.47
16.96
17.46
17.95
18.45
18.94
19.44

cm

p lc bung - Cell pressure

0.54
0.65
0.68
0.72
0.73
0.77
0.80
0.81
0.82
0.83
0.84
0.85
0.85
0.86
0.86
0.87
0.87
0.88
0.87
0.88
0.88
0.87
0.88
0.88
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.87
0.86
0.87
0.86
0.86
0.85
0.85
0.84
0.83

0.00
13.65
18.11
21.89
23.77
28.23
31.51
33.09
34.79
36.01
36.74
38.32
38.32
39.65
39.29
40.02
40.63
41.35
40.99
41.60
41.35
40.38
41.60
41.60
40.02
40.02
40.38
40.63
40.38
40.38
40.99
40.38
39.05
40.02
39.29
39.65
38.68
38.07
36.37
35.40

3.50

2.47
2.80
2.96
3.00
3.01
2.99
2.96
2.93
2.91
2.89
2.86
2.83
2.81
2.78
2.76
2.75
2.73
2.72
2.70
2.69
2.69
2.68
2.67
2.67
2.65
2.65
2.64
2.64
2.63
2.63
2.62
2.62
2.62
2.62
2.61
2.61
2.61
2.61
2.62
2.61

0.00
0.33
0.49
0.53
0.54
0.51
0.49
0.46
0.44
0.42
0.39
0.35
0.33
0.31
0.29
0.27
0.26
0.25
0.23
0.22
0.22
0.21
0.20
0.20
0.18
0.18
0.17
0.17
0.16
0.16
0.15
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.15
0.14

11.000
11.052
11.108
11.166
11.219
11.282
11.335
11.395
11.456
11.512
11.574
11.638
11.695
11.764
11.826
11.891
11.955
12.018
12.085
12.153
12.221
12.283
12.355
12.423
12.497
12.558
12.629
12.716
12.789
12.863
12.938
13.014
13.091
13.168
13.247
13.326
13.407
13.488
13.570
13.654

0.000
1.235
1.630
1.960
2.119
2.502
2.780
2.904
3.037
3.128
3.174
3.292
3.276
3.371
3.322
3.365
3.398
3.441
3.392
3.423
3.384
3.288
3.367
3.348
3.202
3.187
3.197
3.195
3.157
3.139
3.168
3.103
2.983
3.039
2.966
2.976
2.885
2.823
2.680
2.593

1.03
1.93
2.17
2.46
2.61
3.02
3.32
3.47
3.63
3.74
3.82
3.97
3.97
4.09
4.06
4.12
4.16
4.22
4.19
4.23
4.20
4.11
4.19
4.18
4.05
4.04
4.06
4.06
4.03
4.01
4.04
3.98
3.86
3.92
3.85
3.86
3.77
3.71
3.56
3.48

1.03
0.70
0.54
0.50
0.49
0.51
0.54
0.57
0.59
0.61
0.64
0.67
0.69
0.72
0.74
0.75
0.77
0.78
0.80
0.81
0.81
0.82
0.83
0.83
0.85
0.85
0.86
0.86
0.87
0.87
0.88
0.88
0.88
0.88
0.89
0.89
0.89
0.89
0.88
0.89

1.00
2.76
4.01
4.93
5.30
5.86
6.15
6.13
6.15
6.12
5.95
5.88
5.72
5.69
5.50
5.46
5.43
5.41
5.25
5.24
5.17
5.02
5.08
5.02
4.77
4.73
4.72
4.71
4.63
4.61
4.62
4.54
4.39
4.45
4.35
4.36
4.25
4.17
4.04
3.92

1.03
1.32
1.36
1.48
1.55
1.77
1.93
2.02
2.11
2.17
2.23
2.32
2.33
2.40
2.40
2.44
2.47
2.50
2.49
2.52
2.50
2.46
2.51
2.51
2.45
2.45
2.46
2.46
2.45
2.44
2.46
2.43
2.37
2.40
2.37
2.37
2.33
2.30
2.22
2.18

kG/cm

'= ('1-'3)/2

kG/cm

'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c
Reading mV

B.dng tng i
Strain,%

S c
Reading, V

Bin dng
Axial strain

7.49

'1
kPa

C.cao mu - Specimen height

1
-1.2152
1.03
2.47

0.00
0.62
0.82
0.98
1.06
1.25
1.39
1.45
1.52
1.56
1.59
1.65
1.64
1.69
1.66
1.68
1.70
1.72
1.70
1.71
1.69
1.64
1.68
1.67
1.60
1.59
1.60
1.60
1.58
1.57
1.58
1.55
1.49
1.52
1.48
1.49
1.44
1.41
1.34
1.30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.4
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department T - Sheet 10

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A10 - T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
26-10-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
10.92
p lc c hiu - Initial Effective stress
Tc ct - Rate
1.417 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

0.00
15.19
22.64
30.99
33.04
34.94
36.83
37.77
39.66
41.56
43.38
43.75
44.39
44.39
45.34
45.34
46.28
46.28
46.06
46.06
46.06
46.06
46.06
45.57
46.79
45.81
46.42
46.42
46.42
46.42
45.57
47.03
46.79
46.06
46.06
46.06
46.79
46.06
46.42

4.50

2.49
2.66
2.76
2.95
3.08
3.15
3.24
3.27
3.30
3.31
3.31
3.29
3.29
3.26
3.25
3.23
3.21
3.20
3.17
3.15
3.13
3.12
3.10
3.08
3.07
3.06
3.05
3.04
3.02
3.02
3.00
3.00
3.00
2.99
2.98
2.97
2.97
2.95
2.95

0.00
0.17
0.27
0.46
0.59
0.66
0.76
0.79
0.81
0.82
0.82
0.80
0.80
0.78
0.76
0.74
0.72
0.71
0.69
0.66
0.64
0.63
0.61
0.59
0.58
0.57
0.56
0.55
0.54
0.53
0.52
0.51
0.51
0.50
0.49
0.49
0.48
0.47
0.46

10.923
11.009
11.061
11.159
11.234
11.270
11.343
11.377
11.454
11.525
11.565
11.641
11.682
11.757
11.836
11.875
11.959
12.001
12.084
12.167
12.242
12.284
12.365
12.451
12.507
12.563
12.620
12.734
12.792
12.851
12.969
13.029
13.090
13.151
13.276
13.339
13.402
13.532
13.597

1.00
1.75
2.18
2.79
3.07
3.29
3.58
3.70
3.88
4.02
4.15
4.11
4.13
4.06
4.06
4.01
3.99
3.96
3.87
3.80
3.74
3.71
3.65
3.57
3.62
3.53
3.53
3.49
3.46
3.43
3.35
3.40
3.38
3.32
3.28
3.26
3.27
3.20
3.20

2.01
2.53
2.76
2.94
2.89
2.90
2.88
2.89
2.93
3.00
3.06
3.09
3.11
3.12
3.17
3.18
3.23
3.23
3.23
3.24
3.26
3.26
3.27
3.25
3.30
3.26
3.29
3.29
3.29
3.29
3.25
3.31
3.29
3.26
3.26
3.25
3.28
3.25
3.26

kG/cm

'= ('1-'3)/2

2.01
1.84
1.74
1.55
1.42
1.35
1.26
1.23
1.20
1.19
1.19
1.21
1.21
1.24
1.25
1.27
1.29
1.30
1.33
1.35
1.37
1.38
1.40
1.42
1.43
1.44
1.45
1.46
1.48
1.48
1.50
1.50
1.50
1.51
1.52
1.53
1.53
1.55
1.55

2.01
3.22
3.79
4.33
4.36
4.45
4.50
4.55
4.66
4.80
4.94
4.97
5.01
5.01
5.08
5.09
5.16
5.16
5.14
5.14
5.14
5.13
5.13
5.08
5.17
5.09
5.13
5.11
5.11
5.10
5.01
5.11
5.08
5.01
4.99
4.98
5.03
4.95
4.96

kG/cm

0.000
1.380
2.047
2.777
2.941
3.100
3.247
3.320
3.463
3.606
3.751
3.758
3.800
3.776
3.831
3.818
3.870
3.856
3.811
3.785
3.762
3.749
3.725
3.660
3.741
3.647
3.679
3.645
3.629
3.612
3.514
3.609
3.574
3.502
3.469
3.453
3.491
3.404
3.414

'= ('1+'3)/2

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore Pressure
2
kG/cm

p lc NLR
2
Pore Pressure kG/cm

ng sut c hiu
Effective stresses

'3
kPa

0.55
0.67
0.73
0.80
0.82
0.83
0.85
0.86
0.87
0.89
0.90
0.91
0.91
0.91
0.92
0.92
0.93
0.93
0.92
0.92
0.92
0.92
0.92
0.92
0.93
0.92
0.93
0.93
0.93
0.93
0.92
0.93
0.93
0.92
0.92
0.92
0.93
0.92
0.93

Ti trng
Axial Load, kG

S c
Reading mV

Ti
Load

'1
kPa

0.00
0.78
1.25
2.12
2.77
3.08
3.71
3.99
4.64
5.23
5.55
6.17
6.50
7.10
7.71
8.02
8.66
8.99
9.61
10.23
10.78
11.08
11.67
12.27
12.67
13.06
13.45
14.22
14.61
15.00
15.78
16.17
16.56
16.95
17.72
18.11
18.50
19.28
19.67

cm

lch ng sut
Deviator stress,
2
kG/cm

0.000
0.585
0.930
1.579
2.064
2.297
2.765
2.977
3.460
3.900
4.142
4.602
4.846
5.295
5.754
5.983
6.463
6.703
7.170
7.630
8.039
8.267
8.702
9.154
9.450
9.740
10.030
10.611
10.901
11.191
11.771
12.061
12.351
12.641
13.222
13.512
13.802
14.382
14.672

B.dng tng i
Strain,%

S c
Reading, V

Bin dng
Axial strain

7.46

'1/'3

C.cao mu - Specimen height

1
-1.2152
2.01
2.49

0.00
0.69
1.02
1.39
1.47
1.55
1.62
1.66
1.73
1.80
1.88
1.88
1.90
1.89
1.92
1.91
1.93
1.93
1.91
1.89
1.88
1.87
1.86
1.83
1.87
1.82
1.84
1.82
1.81
1.81
1.76
1.80
1.79
1.75
1.73
1.73
1.75
1.70
1.71

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.4
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department T - Sheet 11

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A10 - T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
27-10-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
10.64
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.666 mm/min.
p lc nc l rng - Initial Pore Pressure
cm

p lc bung - Cell pressure

2.45
2.91
3.67
4.16
4.38
4.47
4.51
4.51
4.49
4.47
4.44
4.41
4.39
4.36
4.33
4.31
4.28
4.26
4.24
4.22
4.21
4.19
4.18
4.16
4.16
4.15
4.14
4.13
4.12
4.12
4.12

10.641
10.696
10.769
10.842
10.917
10.993
11.069
11.146
11.220
11.302
11.381
11.466
11.551
11.639
11.727
11.811
11.904
11.989
12.080
12.170
12.265
12.364
12.461
12.564
12.664
12.766
12.870
12.976
13.079
13.184
13.296

1.00
1.69
2.25
2.73
3.05
3.24
3.35
3.42
3.44
3.46
3.46
3.46
3.46
3.43
3.42
3.41
3.39
3.38
3.36
3.34
3.33
3.31
3.29
3.27
3.26
3.25
3.22
3.21
3.20
3.19
3.17

4.05
4.83
4.60
4.35
4.28
4.30
4.34
4.41
4.46
4.54
4.60
4.65
4.71
4.75
4.80
4.84
4.87
4.90
4.93
4.95
4.96
4.98
4.99
4.99
4.99
5.00
4.99
4.99
4.99
4.98
4.97

kG/cm

'= ('1-'3)/2

4.05
3.59
2.83
2.34
2.12
2.03
1.99
1.99
2.01
2.03
2.06
2.09
2.11
2.14
2.17
2.19
2.22
2.24
2.26
2.28
2.29
2.31
2.32
2.34
2.34
2.35
2.36
2.37
2.38
2.38
2.38

4.05
6.07
6.36
6.37
6.45
6.57
6.68
6.82
6.91
7.04
7.14
7.21
7.31
7.36
7.43
7.49
7.52
7.56
7.60
7.62
7.63
7.64
7.65
7.64
7.64
7.65
7.61
7.62
7.60
7.58
7.56

kG/cm

0.000
2.482
3.529
4.034
4.334
4.543
4.684
4.823
4.898
5.010
5.080
5.126
5.192
5.214
5.256
5.300
5.298
5.320
5.340
5.340
5.337
5.333
5.329
5.305
5.301
5.296
5.253
5.247
5.224
5.200
5.174

'= ('1+'3)/2

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore Pressure
2
kG/cm
0.00
0.46
1.22
1.72
1.94
2.03
2.06
2.06
2.04
2.02
1.99
1.97
1.94
1.91
1.88
1.86
1.84
1.82
1.79
1.78
1.76
1.74
1.73
1.72
1.71
1.70
1.69
1.68
1.68
1.68
1.67

'3
kPa

0.00
26.55
38.01
43.73
47.32
49.94
51.85
53.76
54.95
56.63
57.82
58.77
59.97
60.68
61.64
62.59
63.07
63.79
64.50
64.98
65.46
65.94
66.41
66.65
67.13
67.61
67.61
68.08
68.32
68.56
68.80

p lc NLR
2
Pore Pressure kG/cm

Ti trng
Axial Load, kG

S c
Reading mV
0.04
0.31
0.42
0.48
0.52
0.54
0.56
0.58
0.59
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.67
0.68
0.69
0.69
0.70
0.70
0.71
0.71
0.71
0.72
0.72
0.72
0.73
0.73
0.73

6.50

ng sut c hiu
Effective stresses

'1
kPa

0.00
0.52
1.19
1.86
2.53
3.20
3.87
4.53
5.17
5.86
6.50
7.20
7.88
8.58
9.26
9.91
10.61
11.25
11.91
12.56
13.24
13.94
14.61
15.31
15.98
16.65
17.32
18.00
18.65
19.29
19.97

7.37

Ti
Load
lch ng sut
Deviator stress,
2
kG/cm

0.000
0.385
0.876
1.371
1.865
2.360
2.854
3.338
3.806
4.313
4.790
5.304
5.804
6.320
6.823
7.298
7.816
8.286
8.775
9.254
9.752
10.264
10.762
11.274
11.767
12.262
12.758
13.258
13.733
14.208
14.710

B.dng tng i
Strain,%

S c
Reading, V

Bin dng
Axial strain

'1/'3

C.cao mu - Specimen height

1
-100.0000
4.05
2.45

0.00
1.24
1.76
2.02
2.17
2.27
2.34
2.41
2.45
2.51
2.54
2.56
2.60
2.61
2.63
2.65
2.65
2.66
2.67
2.67
2.67
2.67
2.66
2.65
2.65
2.65
2.63
2.62
2.61
2.60
2.59

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 9
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department T - Sheet 12

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu LK - Boring No.

A10

S th nghim - Procedure

CIU

S hiu mu - Sample No.

A10 - T1

Chiu cao mu - Initial height, cm


7.49;7.46;7.37

su - Depth, m

9.5-10.3

ng knh mu - Diameter, cm3.74;3.73;3.68

Deviator stress, q, kg/cm

6.00
5.00
4.00
3.00
First Trial

2.00

Second Trial

1.00

Third Trial

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

2.50

u, kG/cm2

2.00

1.50

First Trial
Second Trial

1.00

Third Trial

0.50

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Bien dang - Strain, %

6.00
First Trial
Second Trial

4.50

Kf-line
Third Trial

3.00

1.50

0.00
0.0

1.5

3.0

4.5

6.0

7.5

9.0

10.5

12.0

Ph lc - Appendix 6.4
T - Sheet 13

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

A15-T1-05

S hiu LK - Boring No.

S th nghim - Procedure

A15

su - Depth, m
Ngi TN - Tested by

9.6-10.5
Thinh

Ngy TN - Tested Date


Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

After test
Giai on bo ha
Saturated Stage

Giai on c kt

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


02-04-08
03-04-'08
04-04-'08
26.6
25.0
26.8

Mu th - Specimen

Sau th nghim

2.02
1.60

1.64

1.58

29.4

27.4

22.2

2.13

2.26

2.13

Dung trng kh - Dry Density, g/cm 3

1.65

1.77

1.74

0.00

0.00

0.00

2.46

1.96

3.42

p lc NLR - P.W.P, kG/cm 2


p lc NLR b.ha - Saturated P.W.P, kG/cm

p lc nguc - Back pressure, kG/cm 2

2.50

2.0

3.5

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

3.5

4.0

6.5

2.50

2.00

3.50

3.42

3.93

6.66

p lc NLR kt thc - Final P.W.P, kG/cm 2

2.47

1.97

3.60

p lc bung - Cell pressure, kG/cm 2

3.50

4.00

6.50

2.47

1.97

3.60

1.03

2.03

2.90

0.025

0.088

0.035

6.6

4.0

6.5

p lc ban u - Initial 3, kG/cm2


Tc bin dng - Rate of Strain, mm/min
Failure Conditions

2.00

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

Trng thi ph hu

2.05

Dung trng kh - Dry Density, g/cm 3

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

Giai on nn

CU

Chiu cao mu - Initial Height, mm

Bin dng - Strain, %


lch ng sut - Deviator stress, kPa

2.974

3.742

4.522

'3f, kG/cm2

1.087
4.061

1.447
5.189

1.944
6.466

-0.057

0.586

0.961

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
2

Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm /s

3.40E-05

1.19E-04

4.77E-05

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

3.76E-02

4.09E-02

1.94E-02

Parameters

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1.25E-09

4.78E-09

9.07E-10

Sc khng ct

1658'

'

2813'

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.779

c'

0.320

ng suat cat - Shear Stress, kG/cm

6.0

4.5

3.0

1.5

0.0
0.0

1.5

3.0

4.5

6.0

7.5

9.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

10.5

12.0

Ph lc - Appendix 6.4
T - Sheet 14

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)


KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TIN
A15-T1-05

Mu - Specimen

Mu th 1 - First Trial

Ngy TN - Tested Date


Chiu di - Length,cm

su - Depth, m

9.6-10.5

Mu th 2 - Second Trial

02-04-'08

03-04-'08

7.60

7.51

7.60

7.40

7.60

7.45

11.34

11.07

11.34

10.73

11.34

10.89

Th tch - Volume, cm3

86.19

83.12

86.19

79.38

86.19

81.14

T 100, min

277.9

443.07

79.3

126.41

198.2

316.06

Vf, mm/min

0.025

'3 Eff. Pressure, ksc


Thi gian
Time t,
min
0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240
360
480
720
960
1440

1.00
Th tch, cm3

t, min
0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49
18.97
21.91
26.83
30.98
37.95

AL NLR

Th tch, cm3

0.088

0.035

2.00

3.00

AL NLR

04-04-'08

Tit din - Area, cm2


Tf, min

SQRT(T)

Mu th 3 - Third Trial

Th tch

AL NLR

10

15

20

25

30

35

40

0
1
2
Vol.Ch.

S hiu LK - Boring No

3
4
5
6

Th tch
7

AL NLR

Volume
Volume
Volume
Volume
8
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
3.42
0.00
3.93
0.00
6.66
0.16
3.44
0.89
3.92
0.20
6.64
0.19
3.44
1.24
3.89
0.27
6.65
0.22
3.43
1.53
3.83
0.34
6.65
7.0
0.26
3.42
1.82
3.76
0.45
6.64
0.36
3.40
2.37
3.68
0.71
6.62
6.0
0.50
3.37
3.02
3.62
1.03
6.59
5.0
0.62
3.35
3.52
3.56
1.29
6.54
0.91
3.30
4.58
3.34
1.92
6.37
4.0
1.37
3.19
5.64
2.77
2.79
5.88
1.71
3.09
6.13
2.37
3.37
5.41
3.0
1.99
2.98
6.33
2.18
3.77
4.98
2.0
2.31
2.80
6.57
2.04
4.23
4.37
2.50
2.70
6.73
2.00
4.46
4.04
1.0
2.80
2.57
6.87
1.98
4.80
3.75
0.1
1
2.96
2.53
6.93
1.97
4.95
3.68
3.01
2.49
4.97
3.61
3.09
2.47
5.07
3.61
5.12
3.60

P.W.P

Cng trnh - Project

10

100

1000

Log (t)
A

10000

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 15

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A15-T1-05
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
02-04-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
11.07
Tc ct - Rate
0.025 mm/min.
p lc nc l rng - Initial Pore Pressure

0.000
0.367
0.733
1.132
1.526
1.920
2.296
2.660
3.036
3.418
3.787
4.177
4.550
4.937
5.315
5.684
6.074
6.440
6.839
7.228
7.613
8.017
8.397
8.775
9.153
9.540
9.902
10.283
10.640
11.029
11.426
11.795
12.196
12.590
12.977
13.367
13.742
14.127
14.503
14.872

0.00
0.49
0.98
1.51
2.03
2.56
3.06
3.54
4.04
4.55
5.04
5.56
6.06
6.57
7.08
7.57
8.09
8.58
9.11
9.63
10.14
10.68
11.18
11.69
12.19
12.71
13.19
13.69
14.17
14.69
15.22
15.71
16.24
16.77
17.28
17.80
18.30
18.81
19.31
19.81

cm

p lc bung - Cell pressure

0.02
0.17
0.21
0.24
0.27
0.28
0.30
0.32
0.33
0.34
0.35
0.36
0.37
0.37
0.37
0.37
0.37
0.37
0.38
0.37
0.37
0.36
0.36
0.36
0.36
0.35
0.36
0.36
0.36
0.35
0.36
0.36
0.36
0.36
0.36
0.35
0.35
0.35
0.35
0.35

0.00
15.18
19.12
22.23
24.76
26.53
28.20
29.88
30.94
32.27
33.32
33.94
34.73
35.24
35.24
35.35
35.14
35.14
35.61
35.35
34.91
34.42
33.94
33.94
33.70
33.46
33.70
33.70
33.70
33.46
33.70
33.70
33.85
33.94
33.85
33.41
33.22
32.98
33.22
33.32

3.50

2.47
2.66
2.74
2.77
2.77
2.74
2.72
2.67
2.62
2.58
2.52
2.47
2.43
2.41
2.38
2.35
2.33
2.30
2.27
2.25
2.24
2.21
2.19
2.18
2.17
2.15
2.14
2.13
2.12
2.11
2.10
2.09
2.08
2.07
2.06
2.05
2.04
2.04
2.03
2.02

0.00
0.19
0.27
0.30
0.30
0.27
0.25
0.20
0.15
0.11
0.05
0.00
-0.04
-0.06
-0.09
-0.12
-0.14
-0.17
-0.20
-0.22
-0.23
-0.26
-0.28
-0.29
-0.30
-0.32
-0.33
-0.34
-0.35
-0.36
-0.37
-0.38
-0.39
-0.40
-0.41
-0.42
-0.43
-0.43
-0.44
-0.45

11.070
11.124
11.179
11.239
11.299
11.360
11.419
11.476
11.536
11.598
11.658
11.722
11.784
11.849
11.913
11.976
12.044
12.108
12.179
12.249
12.319
12.393
12.464
12.535
12.606
12.681
12.751
12.826
12.897
12.976
13.056
13.133
13.216
13.300
13.383
13.467
13.549
13.635
13.720
13.804

0.000
1.364
1.711
1.978
2.191
2.335
2.470
2.603
2.682
2.782
2.858
2.896
2.947
2.974
2.958
2.951
2.917
2.902
2.924
2.886
2.834
2.777
2.723
2.708
2.673
2.639
2.643
2.628
2.613
2.579
2.581
2.566
2.561
2.552
2.529
2.481
2.452
2.419
2.422
2.414

1.03
2.20
2.47
2.71
2.93
3.09
3.25
3.44
3.56
3.70
3.83
3.92
4.01
4.06
4.07
4.10
4.09
4.10
4.15
4.13
4.10
4.07
4.03
4.03
4.00
3.99
4.00
4.00
3.99
3.97
3.98
3.98
3.98
3.98
3.97
3.93
3.91
3.88
3.89
3.89

1.03
0.84
0.76
0.73
0.73
0.76
0.78
0.83
0.88
0.92
0.98
1.03
1.07
1.09
1.12
1.15
1.17
1.20
1.23
1.25
1.26
1.29
1.31
1.32
1.33
1.35
1.36
1.37
1.38
1.39
1.40
1.41
1.42
1.43
1.44
1.45
1.46
1.46
1.47
1.48

1.00
2.62
3.24
3.70
3.98
4.08
4.16
4.13
4.05
4.03
3.93
3.82
3.77
3.73
3.65
3.57
3.49
3.42
3.38
3.32
3.24
3.15
3.08
3.05
3.01
2.95
2.95
2.92
2.89
2.85
2.84
2.82
2.80
2.78
2.76
2.71
2.68
2.65
2.65
2.63

1.03
1.52
1.62
1.72
1.83
1.93
2.02
2.13
2.22
2.31
2.41
2.47
2.54
2.57
2.59
2.62
2.63
2.65
2.69
2.69
2.68
2.68
2.67
2.67
2.67
2.67
2.68
2.69
2.69
2.68
2.69
2.70
2.70
2.71
2.71
2.69
2.68
2.67
2.68
2.69

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading

B.dng tng i
Strain,%

S c Ch.v
Disp Reading mm

Bin dng
Axial strain

7.51

'1
kPa

C.cao mu - Specimen height

1.000
-100.000
1.03
2.47

0.00
0.68
0.86
0.99
1.10
1.17
1.23
1.30
1.34
1.39
1.43
1.45
1.47
1.49
1.48
1.48
1.46
1.45
1.46
1.44
1.42
1.39
1.36
1.35
1.34
1.32
1.32
1.31
1.31
1.29
1.29
1.28
1.28
1.28
1.26
1.24
1.23
1.21
1.21
1.21

Ph lc - Appendix 6.4
T - Sheet 16

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A15-T1-05
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
03-04-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
10.73
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.088 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.733
10.784
10.840
10.893
10.951
11.005
11.061
11.118
11.175
11.238
11.295
11.357
11.412
11.478
11.540
11.601
11.666
11.725
11.792
11.855
11.919
11.990
12.058
12.121
12.196
12.263
12.337
12.407
12.478
12.552
12.625
12.701
12.775
12.853
12.929
13.009
13.087
13.169
13.249

1.00
2.22
2.82
3.22
3.54
3.67
3.74
3.68
3.59
3.45
3.34
3.27
3.20
3.15
3.09
3.04
3.01
2.97
2.94
2.90
2.89
2.88
2.85
2.86
2.83
2.83
2.81
2.78
2.76
2.72
2.72
2.68
2.67
2.64
2.59
2.57
2.57
2.54
2.50

2.03
2.27
2.43
2.59
2.78
2.94
3.11
3.22
3.32
3.39
3.46
3.47
3.51
3.54
3.58
3.60
3.62
3.62
3.65
3.65
3.68
3.71
3.71
3.75
3.74
3.76
3.76
3.76
3.77
3.76
3.78
3.77
3.79
3.79
3.78
3.79
3.83
3.79
3.75

kG/cm

t'= ('1-'3)/2

2.03
1.41
1.27
1.22
1.22
1.26
1.31
1.38
1.45
1.53
1.59
1.63
1.67
1.70
1.75
1.78
1.81
1.83
1.85
1.87
1.89
1.91
1.93
1.94
1.95
1.97
1.97
1.99
2.00
2.02
2.03
2.05
2.06
2.08
2.10
2.12
2.14
2.14
2.14

2.03
3.13
3.59
3.95
4.33
4.62
4.90
5.06
5.19
5.26
5.33
5.32
5.34
5.38
5.40
5.41
5.43
5.42
5.44
5.43
5.46
5.50
5.49
5.55
5.53
5.56
5.54
5.53
5.53
5.49
5.52
5.49
5.51
5.50
5.45
5.45
5.51
5.44
5.35

kG/cm

0.000
1.715
2.316
2.723
3.108
3.358
3.594
3.685
3.742
3.732
3.734
3.693
3.675
3.671
3.651
3.632
3.626
3.593
3.587
3.558
3.570
3.593
3.559
3.610
3.578
3.590
3.569
3.537
3.529
3.477
3.487
3.445
3.444
3.424
3.347
3.326
3.364
3.295
3.211

s'= ('1+'3)/2

'3
kPa

0.00
0.62
0.76
0.81
0.81
0.77
0.72
0.66
0.59
0.51
0.44
0.41
0.36
0.33
0.28
0.25
0.23
0.20
0.18
0.16
0.14
0.12
0.11
0.09
0.08
0.07
0.06
0.04
0.03
0.02
0.00
-0.02
-0.03
-0.05
-0.07
-0.09
-0.11
-0.11
-0.11

T.din hiu chnh


2
Corr. A cm

1.97
2.59
2.73
2.78
2.78
2.74
2.69
2.62
2.55
2.47
2.41
2.37
2.33
2.30
2.25
2.22
2.19
2.17
2.15
2.13
2.11
2.09
2.07
2.06
2.05
2.03
2.03
2.01
2.00
1.98
1.97
1.95
1.94
1.92
1.90
1.88
1.86
1.86
1.86

'1
kPa

0.00
18.50
25.11
29.66
34.04
36.96
39.75
40.97
41.82
41.94
42.18
41.94
41.94
42.13
42.13
42.13
42.30
42.13
42.30
42.18
42.55
43.08
42.91
43.76
43.64
44.03
44.03
43.88
44.03
43.64
44.03
43.76
44.00
44.00
43.27
43.27
44.03
43.40
42.55

4.00

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.52
0.67
0.72
0.76
0.80
0.82
0.84
0.85
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.87
0.86
0.87
0.86
0.87
0.87
0.87
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.88
0.87
0.87
0.88
0.87
0.87

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.47
0.99
1.47
1.99
2.47
2.97
3.46
3.96
4.50
4.98
5.49
5.95
6.49
6.99
7.48
8.00
8.46
8.98
9.46
9.95
10.49
10.99
11.45
12.00
12.48
13.00
13.49
13.98
14.49
14.98
15.49
15.99
16.50
16.99
17.50
17.99
18.50
18.99

cm

p lc NLR
Pore Pressure
2
kG/cm

1.271
1.398
1.536
1.665
1.806
1.934
2.068
2.201
2.334
2.478
2.607
2.746
2.869
3.014
3.147
3.278
3.418
3.542
3.681
3.810
3.941
4.085
4.220
4.344
4.490
4.620
4.759
4.891
5.023
5.160
5.292
5.429
5.560
5.697
5.829
5.966
6.098
6.235
6.367

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.40

'1/'3

C.cao mu - Specimen height

-2.757
-1.215
2.03
1.97

0.00
0.86
1.16
1.36
1.55
1.68
1.80
1.84
1.87
1.87
1.87
1.85
1.84
1.84
1.83
1.82
1.81
1.80
1.79
1.78
1.78
1.80
1.78
1.81
1.79
1.80
1.78
1.77
1.76
1.74
1.74
1.72
1.72
1.71
1.67
1.66
1.68
1.65
1.61

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 17

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
A15-T1-05
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
04-04-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
10.89
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.035 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.892
10.945
11.002
11.057
11.113
11.170
11.228
11.285
11.344
11.401
11.464
11.525
11.586
11.649
11.709
11.775
11.839
11.903
11.966
12.034
12.102
12.169
12.233
12.304
12.375
12.446
12.519
12.592
12.664
12.738
12.813
12.890
12.965
13.043
13.122
13.202
13.283
13.363
13.446
13.530
13.615

1.00
1.69
2.19
2.62
3.00
3.27
3.43
3.46
3.45
3.44
3.43
3.39
3.37
3.33
3.19
3.13
3.11
3.05
3.03
2.98
2.95
2.86
2.83
2.78
2.76
2.73
2.71
2.69
2.68
2.68
2.70
2.71
2.67
2.65
2.66
2.64
2.59
2.61
2.61
2.60
2.50

2.90
2.83
2.84
2.93
3.10
3.27
3.39
3.56
3.69
3.82
3.98
4.05
4.15
4.20
4.22
4.25
4.24
4.28
4.32
4.34
4.35
4.33
4.33
4.31
4.32
4.32
4.33
4.34
4.32
4.37
4.39
4.43
4.39
4.39
4.42
4.42
4.37
4.34
4.31
4.30
4.19

kG/cm

t'= ('1-'3)/2

2.90
2.11
1.78
1.62
1.55
1.54
1.53
1.60
1.66
1.72
1.80
1.84
1.90
1.94
2.01
2.06
2.06
2.12
2.15
2.18
2.21
2.24
2.26
2.28
2.30
2.32
2.34
2.35
2.35
2.38
2.37
2.38
2.39
2.41
2.42
2.43
2.43
2.40
2.39
2.39
2.39

2.90
3.55
3.90
4.25
4.65
5.01
5.25
5.52
5.72
5.93
6.16
6.25
6.41
6.47
6.43
6.45
6.41
6.45
6.50
6.50
6.50
6.41
6.39
6.34
6.34
6.32
6.33
6.32
6.28
6.37
6.41
6.47
6.38
6.37
6.43
6.42
6.30
6.27
6.24
6.22
5.98

kG/cm

0.000
1.443
2.124
2.625
3.103
3.479
3.721
3.928
4.060
4.206
4.365
4.406
4.508
4.522
4.418
4.384
4.350
4.337
4.355
4.320
4.296
4.173
4.131
4.057
4.044
4.004
3.997
3.974
3.935
3.987
4.037
4.087
3.990
3.966
4.015
3.990
3.868
3.863
3.848
3.824
3.591

s'= ('1+'3)/2

'3
kPa

0.00
0.80
1.12
1.28
1.35
1.37
1.37
1.31
1.24
1.18
1.11
1.06
1.00
0.96
0.89
0.84
0.84
0.79
0.76
0.72
0.70
0.67
0.64
0.62
0.60
0.59
0.57
0.55
0.56
0.52
0.53
0.52
0.51
0.50
0.49
0.48
0.47
0.50
0.51
0.51
0.51

T.din hiu chnh


2
Corr. A cm

3.60
4.39
4.72
4.88
4.95
4.96
4.97
4.90
4.84
4.78
4.70
4.66
4.60
4.56
4.49
4.44
4.44
4.38
4.35
4.32
4.29
4.26
4.24
4.22
4.20
4.18
4.16
4.15
4.15
4.12
4.13
4.12
4.11
4.09
4.08
4.07
4.07
4.10
4.11
4.11
4.11

'1
kPa

0.00
15.80
23.37
29.02
34.49
38.86
41.78
44.33
46.06
47.95
50.04
50.78
52.23
52.68
51.73
51.62
51.50
51.62
52.11
51.99
51.99
50.78
50.53
49.92
50.04
49.84
50.04
50.04
49.84
50.78
51.73
52.68
51.73
51.73
52.68
52.68
51.38
51.62
51.74
51.74
48.89

6.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.57
0.70
0.76
0.81
0.85
0.89
0.91
0.94
0.95
0.96
0.98
0.99
1.00
1.00
1.00
1.00
0.99
1.00
1.00
1.00
1.00
0.99
0.99
0.98
0.98
0.98
0.98
0.98
0.98
0.99
1.00
1.00
1.00
1.00
1.00
1.00
0.99
1.00
1.00
1.00
0.97

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.49
1.00
1.49
1.99
2.49
3.00
3.49
3.98
4.47
4.99
5.50
5.99
6.50
6.98
7.50
8.00
8.50
8.98
9.49
10.00
10.49
10.96
11.48
11.98
12.49
13.00
13.50
13.99
14.50
15.00
15.50
15.99
16.49
17.00
17.50
18.00
18.49
19.00
19.50
20.00

cm

p lc NLR
Pore Pressure
2
kG/cm

1.406
1.538
1.675
1.809
1.944
2.079
2.215
2.348
2.482
2.613
2.755
2.891
3.025
3.162
3.292
3.432
3.567
3.701
3.832
3.971
4.108
4.241
4.368
4.507
4.644
4.781
4.918
5.054
5.187
5.323
5.458
5.594
5.727
5.863
5.999
6.134
6.270
6.403
6.539
6.675
6.810

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.45

'1/'3

C.cao mu - Specimen height

-2.757
-1.215
2.90
3.60

0.00
0.72
1.06
1.31
1.55
1.74
1.86
1.96
2.03
2.10
2.18
2.20
2.25
2.26
2.21
2.19
2.18
2.17
2.18
2.16
2.15
2.09
2.07
2.03
2.02
2.00
2.00
1.99
1.97
1.99
2.02
2.04
2.00
1.98
2.01
2.00
1.93
1.93
1.92
1.91
1.80

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.4
Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

T - Sheet 18

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Projec KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.

A15

S hiu mu - Sample No.

S th nghim - Procedure

A15-T1-05

su - Depth, m

9.6-10.5

CIU

Chiu cao mu - Initial height, cm

7.51;7.4;7.45

ng knh mu - Diameter, cm

3.75;3.7;3.72

Deviator stress, q, kg/cm

5.00
4.00
3.00
2.00

First Trial
Second Trial

1.00

Third Trial

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

1.50

u, kG/cm2

1.00
0.50
0.00

First Trial
Second Trial

-0.50

Third Trial

-1.00

0.0

2.0

4.0

6.0

16.0

18.0

20.0

Bien dang - Strain, %

6.00
First Trial
Second Trial

4.50

Kf-line
Third Trial

3.00

1.50

0.00
0.0

1.5

3.0

4.5

6.0

s'

7.5

9.0

10.5

12.0

Ph lc - Appendix 6.4
T - Sheet 19

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

B3-T1-04

S hiu LK - Boring No.

S th nghim - Procedure

B3-T1

su - Depth, m
Ngi TN - Tested by

8.2-8.9
Thinh

CU

Chiu cao mu - Initial Height, mm

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


19-07-09
20-07-'09
21-07-'09
45.1
48.1
47.4

Mu th - Specimen
Ngy TN - Tested Date
Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

1.76

1.80

1.80

Dung trng kh - Dry Density, g/cm 3

1.21

1.22

1.22

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

46.4

47.4

44.5

1.81

1.89

1.91

Dung trng kh - Dry Density, g/cm 3

1.24

1.28

1.32

Giai on bo ha

p lc NLR - P.W.P, kG/cm 2

0.00

0.00

0.00

Saturated Stage

p lc NLR b.ha - Saturated P.W.P, kG/cm 2

1.95

2.49

2.01

p lc nguc - Back pressure, kG/cm 2

2.00

2.5

2.0

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

Sau th nghim
After test

Giai on c kt

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

p lc NLR kt thc - Final P.W.P, kG/cm 2


Giai on nn

p lc bung - Cell pressure, kG/cm

2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

p lc ban u - Initial 3, kG/cm

Tc bin dng - Rate of Strain, mm/min

3.0

4.5

5.0

2.00

2.50

2.00

2.90

4.49

4.99

1.97

2.52

2.02

3.00

4.50

5.00

1.98

2.52

2.02

1.02

1.98

2.98

0.329

0.105

0.252

Trng thi ph hu

Bin dng - Strain, %

3.4

3.5

3.0

Failure Conditions

lch ng sut - Deviator stress, kPa

1.422

2.012

2.514

'3f, kG/cm2

0.555
1.977

1.054
3.065

1.534
4.048

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm2/s

0.461

0.928

1.442

4.41E-04

1.41E-04

3.42E-04

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

4.31E-02

2.62E-02

2.46E-02

Parameters

1.86E-08

3.62E-09

8.24E-09

Sc khng ct

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1235'

'

2059'

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.350

c'

0.280

ng suat cat - Shear Stress, kG/cm

4.0

3.0

2.0

1.0

0.0
0.0

1.0

2.0

3.0

4.0

5.0

6.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

7.0

8.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 20

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)


KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
B3-T1-04
Mu th 1 - First Trial

Mu - Specimen
Ngy TN - Tested Date
Chiu di - Length,cm
Tit din - Area, cm

Th tch - Volume, cm
T

100, min

Tf, min

Vf, mm/min

0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240

00-01-'00

7.50

7.60

7.47

7.60

7.42

11.34

11.04

11.34

10.95

11.34

10.79

86.19

82.77

86.19

81.80

86.19

80.01

21.4

34.17

67.1

107.02

27.7

44.09

1.00
3

AL NLR

Th tch, cm3

0.105

0.252

2.00

3.00

AL NLR

Th tch

AL NLR

10

15

20

100

1000

7.60

Th tch, cm

0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49

Mu th 3 - Third Trial

20-07-'09

0.329

t, min

8.2-8.9

Mu th 2 - Second Trial

19-07-'09

'3 Eff. Pressure, ksc


Thi gian
Time t,
min

su - Depth, m

Vol.Ch.

S hiu LK - Boring No

4
5

Th tch
6

AL NLR

Volume
Volume
Volume
Volume7
2
2
2
2
3 PWP, kg/cm
3 PWP, kg/cm
3 PWP, kg/cm
3 PWP, kg/cm
change, cm
change, cm
change, cm
change, cm
0.00
2.90
0.00
4.49
0.00
4.99
0.23
2.87
0.23
4.48
0.64
4.68
0.43
2.78
0.31
4.47
0.94
4.53
0.66
2.70
0.40
4.46
1.28
4.41
5.5
0.98
2.63
0.55
4.42
1.79
4.26
5.0
1.64
2.53
0.91
4.37
2.81
4.00
4.5
2.31
2.40
1.40
4.29
3.79
3.52
4.0
2.71
2.28
1.83
4.16
4.37
3.09
3.5
3.26
2.07
2.83
3.69
5.20
2.49
3.0
3.46
1.97
3.81
2.97
5.78
2.18
4.16
2.69
5.99
2.09
2.5
4.32
2.59
6.11
2.06
2.0
4.44
2.52
6.23
2.04
1.5
6.29
2.02
1.0

SQRT(T)
A

P.W.P

Cng trnh - Project

0.1

10

Log (t)

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 21

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B3-T1-04
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
19-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
11.04
Tc ct - Rate
0.329 mm/min.
p lc nc l rng - Initial Pore Pressure

3.743
3.730
3.716
3.700
3.687
3.670
3.656
3.644
3.627
3.611
3.597
3.581
3.568
3.552
3.536
3.524
3.509
3.493
3.479
3.463
3.450
3.433
3.422
3.405
3.392
3.377
3.361
3.346
3.332
3.315
3.302
3.287
3.272
3.266

0.00
0.45
0.92
1.46
1.90
2.47
2.95
3.35
3.95
4.48
4.94
5.48
5.92
6.46
7.00
7.43
7.92
8.46
8.95
9.49
9.93
10.49
10.86
11.43
11.88
12.39
12.95
13.45
13.90
14.48
14.93
15.44
15.94
16.14

cm

p lc bung - Cell pressure

0.57
0.88
1.03
1.16
1.25
1.33
1.40
1.44
1.44
1.37
1.31
1.33
1.30
1.29
1.30
1.29
1.28
1.28
1.30
1.30
1.30
1.30
1.31
1.32
1.30
1.32
1.32
1.32
1.34
1.33
1.33
1.33
1.33
1.29

0.00
5.66
8.55
10.87
12.61
14.21
15.51
16.24
16.09
14.79
13.77
14.06
13.63
13.34
13.48
13.34
13.19
13.19
13.48
13.63
13.48
13.63
13.77
13.92
13.63
13.92
13.92
13.92
14.35
14.21
14.21
14.06
14.06
13.34

3.00

1.98
2.19
2.33
2.41
2.45
2.48
2.47
2.44
2.41
2.33
2.30
2.29
2.29
2.29
2.28
2.28
2.27
2.26
2.26
2.27
2.27
2.27
2.27
2.27
2.27
2.27
2.26
2.27
2.27
2.27
2.26
2.26
2.26
2.26

0.00
0.21
0.35
0.43
0.47
0.49
0.48
0.46
0.42
0.35
0.32
0.31
0.31
0.30
0.30
0.30
0.29
0.28
0.28
0.28
0.29
0.29
0.29
0.29
0.28
0.29
0.28
0.29
0.29
0.29
0.28
0.28
0.28
0.27

11.038
11.088
11.141
11.202
11.252
11.318
11.373
11.421
11.492
11.555
11.611
11.679
11.732
11.800
11.869
11.924
11.987
12.059
12.123
12.195
12.254
12.331
12.382
12.463
12.526
12.599
12.680
12.753
12.820
12.908
12.976
13.054
13.131
13.163

0.000
0.510
0.768
0.971
1.121
1.255
1.364
1.422
1.400
1.280
1.186
1.204
1.162
1.130
1.136
1.119
1.101
1.094
1.112
1.118
1.100
1.105
1.112
1.117
1.088
1.105
1.098
1.091
1.120
1.101
1.095
1.077
1.071
1.013

1.02
1.32
1.43
1.56
1.67
1.78
1.90
1.98
1.99
1.94
1.89
1.91
1.87
1.85
1.85
1.84
1.83
1.83
1.85
1.85
1.83
1.83
1.84
1.84
1.82
1.83
1.83
1.82
1.85
1.83
1.83
1.82
1.81
1.76

1.02
0.81
0.67
0.59
0.55
0.52
0.53
0.56
0.59
0.67
0.70
0.71
0.71
0.71
0.72
0.72
0.73
0.74
0.74
0.73
0.73
0.73
0.73
0.73
0.73
0.73
0.74
0.73
0.73
0.73
0.74
0.74
0.74
0.74

1.00
1.63
2.15
2.65
3.06
3.41
3.56
3.56
3.36
2.92
2.70
2.70
2.64
2.58
2.58
2.55
2.51
2.49
2.51
2.52
2.51
2.52
2.53
2.54
2.48
2.52
2.49
2.50
2.54
2.51
2.49
2.45
2.45
2.36

1.02
1.06
1.05
1.07
1.11
1.15
1.22
1.27
1.29
1.30
1.29
1.31
1.29
1.28
1.28
1.28
1.28
1.28
1.29
1.29
1.28
1.28
1.29
1.29
1.28
1.28
1.28
1.27
1.29
1.28
1.28
1.28
1.27
1.25

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading mV

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.50

'1
kPa

C.cao mu - Specimen height

-25.369
-0.1863
1.02
1.98

0.00
0.26
0.38
0.49
0.56
0.63
0.68
0.71
0.70
0.64
0.59
0.60
0.58
0.57
0.57
0.56
0.55
0.55
0.56
0.56
0.55
0.55
0.56
0.56
0.54
0.55
0.55
0.55
0.56
0.55
0.55
0.54
0.54
0.51

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.4
Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department
T - Sheet 22

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B3-T1-04
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
20-07-'09
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.95
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.105 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.951
11.006
11.060
11.111
11.175
11.230
11.289
11.349
11.406
11.469
11.528
11.588
11.653
11.713
11.777
11.840
11.905
11.972
12.037
12.100
12.167
12.240
12.309
12.380
12.447
12.520
12.594
12.666
12.742
12.815
12.893
12.968
13.044
13.124
13.202
13.285
13.365
13.445
13.531
13.614
13.701

1.00
2.02
2.45
2.71
2.88
2.91
2.91
2.91
2.90
2.90
2.88
2.88
2.87
2.86
2.87
2.86
2.85
2.86
2.85
2.86
2.85
2.86
2.87
2.86
2.85
2.86
2.86
2.84
2.83
2.83
2.81
2.78
2.77
2.76
2.76
2.73
2.71
2.69
2.65
2.63
2.60

1.98
2.05
2.04
2.04
2.02
2.04
2.06
2.06
2.05
2.04
2.04
2.03
2.03
2.03
2.00
2.01
1.98
1.98
1.97
1.96
1.94
1.94
1.92
1.92
1.90
1.89
1.89
1.87
1.86
1.85
1.83
1.83
1.81
1.79
1.78
1.76
1.75
1.74
1.74
1.72
1.70

kG/cm

t'= ('1-'3)/2

1.98
1.36
1.18
1.10
1.04
1.04
1.05
1.05
1.05
1.05
1.05
1.05
1.05
1.05
1.04
1.04
1.03
1.03
1.02
1.01
1.01
1.00
0.99
0.99
0.99
0.98
0.98
0.97
0.97
0.97
0.96
0.97
0.96
0.95
0.95
0.95
0.95
0.94
0.95
0.95
0.95

1.98
2.75
2.89
2.98
3.00
3.03
3.06
3.07
3.05
3.04
3.03
3.02
3.01
3.01
2.97
2.98
2.94
2.93
2.91
2.90
2.88
2.87
2.85
2.84
2.81
2.81
2.80
2.76
2.75
2.73
2.71
2.69
2.66
2.63
2.61
2.58
2.56
2.54
2.52
2.49
2.46

kG/cm

0.000
1.387
1.711
1.884
1.958
1.992
2.008
2.012
1.998
1.991
1.981
1.971
1.959
1.957
1.939
1.936
1.908
1.903
1.890
1.887
1.867
1.866
1.855
1.847
1.825
1.827
1.820
1.789
1.783
1.766
1.742
1.722
1.702
1.680
1.660
1.634
1.615
1.599
1.571
1.542
1.518

s'= ('1+'3)/2

'3
kPa

0.00
0.62
0.80
0.88
0.94
0.94
0.93
0.93
0.93
0.93
0.93
0.93
0.93
0.93
0.95
0.94
0.95
0.96
0.96
0.97
0.97
0.98
0.99
0.99
1.00
1.00
1.00
1.01
1.01
1.01
1.02
1.02
1.02
1.03
1.04
1.04
1.04
1.04
1.03
1.03
1.04

T.din hiu chnh


2
Corr. A cm

2.52
3.14
3.32
3.40
3.46
3.46
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.46
3.46
3.47
3.47
3.48
3.49
3.49
3.50
3.51
3.51
3.51
3.52
3.52
3.53
3.53
3.53
3.54
3.53
3.54
3.55
3.55
3.55
3.55
3.56
3.55
3.55
3.55

'1
kPa

0.00
15.26
18.92
20.94
21.89
22.37
22.66
22.83
22.79
22.83
22.83
22.83
22.83
22.92
22.83
22.92
22.71
22.79
22.75
22.83
22.71
22.83
22.83
22.87
22.71
22.87
22.92
22.66
22.71
22.63
22.46
22.34
22.20
22.04
21.91
21.70
21.58
21.50
21.25
21.00
20.79

4.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.57
0.69
0.72
0.74
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.76
0.75
0.76
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.76
0.75
0.76
0.76
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.74
0.74
0.74
0.74
0.74

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.50
0.99
1.44
2.00
2.48
2.99
3.51
3.98
4.51
5.00
5.49
6.02
6.50
7.01
7.51
8.01
8.53
9.02
9.49
9.99
10.53
11.03
11.54
12.02
12.53
13.04
13.54
14.05
14.54
15.06
15.55
16.04
16.56
17.05
17.57
18.06
18.55
19.06
19.56
20.07

cm

p lc NLR
Pore Pressure
2
kG/cm

1.176
1.312
1.444
1.567
1.719
1.849
1.987
2.127
2.256
2.399
2.531
2.664
2.808
2.938
3.076
3.211
3.347
3.486
3.620
3.748
3.884
4.029
4.165
4.303
4.432
4.572
4.710
4.844
4.983
5.117
5.256
5.390
5.523
5.663
5.796
5.936
6.069
6.202
6.342
6.475
6.615

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.47

'1/'3

C.cao mu - Specimen height

-2.757
-1.2152
1.98
2.52

0.00
0.69
0.86
0.94
0.98
1.00
1.00
1.01
1.00
1.00
0.99
0.99
0.98
0.98
0.97
0.97
0.95
0.95
0.94
0.94
0.93
0.93
0.93
0.92
0.91
0.91
0.91
0.89
0.89
0.88
0.87
0.86
0.85
0.84
0.83
0.82
0.81
0.80
0.79
0.77
0.76

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.4
Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department
T - Sheet 23

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B3-T1-04
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
00-01-'00
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.79
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.252 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.790
10.842
10.897
10.951
11.007
11.064
11.123
11.174
11.235
11.297
11.352
11.417
11.474
11.534
11.601
11.658
11.725
11.788
11.854
11.918
11.982
12.053
12.119
12.185
12.260
12.327
12.396
12.473
12.543
12.614
12.686
12.767
12.840
12.915
12.998
13.074
13.152
13.238
13.317
13.397

1.00
1.83
2.19
2.36
2.48
2.54
2.64
2.67
2.70
2.73
2.74
2.74
2.74
2.74
2.74
2.74
2.75
2.69
2.69
2.67
2.64
2.59
2.55
2.49
2.43
2.40
2.37
2.35
2.32
2.25
2.22
2.17
2.10
2.09
2.07
2.03
2.02
2.01
1.96
1.92

2.98
2.92
2.98
2.93
2.87
2.80
2.79
2.75
2.70
2.67
2.62
2.57
2.52
2.48
2.44
2.41
2.38
2.32
2.30
2.27
2.26
2.23
2.19
2.15
2.11
2.08
2.06
2.06
2.04
2.00
1.99
1.96
1.92
1.93
1.92
1.89
1.87
1.85
1.82
1.80

kG/cm

t'= ('1-'3)/2

2.98
2.07
1.87
1.75
1.65
1.58
1.53
1.50
1.46
1.43
1.40
1.37
1.35
1.33
1.30
1.29
1.27
1.26
1.25
1.24
1.24
1.24
1.24
1.23
1.23
1.23
1.22
1.23
1.23
1.23
1.24
1.24
1.24
1.25
1.25
1.25
1.24
1.23
1.23
1.23

2.98
3.77
4.09
4.12
4.09
4.03
4.05
4.00
3.94
3.91
3.84
3.76
3.69
3.63
3.57
3.53
3.49
3.39
3.36
3.31
3.27
3.22
3.15
3.06
2.99
2.94
2.90
2.89
2.86
2.77
2.74
2.68
2.61
2.61
2.59
2.54
2.50
2.48
2.41
2.37

kG/cm

0.000
1.706
2.219
2.371
2.442
2.442
2.514
2.502
2.482
2.475
2.439
2.390
2.343
2.304
2.265
2.244
2.223
2.131
2.114
2.068
2.032
1.978
1.917
1.832
1.762
1.712
1.678
1.659
1.626
1.542
1.504
1.447
1.368
1.360
1.335
1.289
1.263
1.242
1.182
1.137

s'= ('1+'3)/2

'3
kPa

0.00
0.91
1.11
1.23
1.32
1.39
1.44
1.48
1.52
1.55
1.58
1.60
1.63
1.65
1.67
1.69
1.71
1.72
1.73
1.74
1.74
1.73
1.74
1.75
1.75
1.75
1.75
1.75
1.74
1.74
1.74
1.74
1.74
1.73
1.73
1.73
1.73
1.74
1.75
1.75

T.din hiu chnh


2
Corr. A cm

2.02
2.93
3.13
3.25
3.35
3.42
3.47
3.50
3.54
3.57
3.60
3.63
3.65
3.67
3.70
3.71
3.73
3.74
3.75
3.76
3.76
3.76
3.76
3.77
3.77
3.77
3.78
3.77
3.77
3.77
3.76
3.76
3.76
3.75
3.75
3.75
3.76
3.77
3.77
3.77

'1
kPa

0.00
18.50
24.18
25.97
26.88
27.01
27.96
27.96
27.89
27.96
27.68
27.28
26.88
26.58
26.27
26.16
26.07
25.12
25.06
24.64
24.34
23.84
23.24
22.32
21.61
21.11
20.80
20.70
20.39
19.46
19.08
18.47
17.56
17.56
17.35
16.86
16.61
16.44
15.74
15.23

5.00

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.69
0.84
0.89
0.90
0.91
0.91
0.92
0.92
0.92
0.92
0.92
0.91
0.91
0.91
0.90
0.90
0.90
0.89
0.89
0.89
0.89
0.88
0.88
0.87
0.87
0.86
0.86
0.86
0.86
0.85
0.85
0.84
0.83
0.83
0.83
0.83
0.82
0.82
0.82
0.81

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.48
0.98
1.47
1.98
2.48
3.00
3.44
3.96
4.49
4.95
5.49
5.97
6.45
6.99
7.44
7.97
8.47
8.98
9.46
9.95
10.48
10.97
11.45
11.99
12.47
12.96
13.50
13.98
14.46
14.95
15.49
15.97
16.45
16.99
17.48
17.96
18.50
18.98
19.46

cm

p lc NLR
Pore Pressure
2
kG/cm

1.199
1.328
1.464
1.595
1.731
1.867
2.005
2.125
2.264
2.406
2.531
2.677
2.804
2.934
3.079
3.202
3.344
3.478
3.615
3.745
3.875
4.019
4.150
4.280
4.424
4.555
4.685
4.829
4.960
5.090
5.220
5.365
5.495
5.625
5.770
5.900
6.030
6.175
6.305
6.435

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.42

'1/'3

C.cao mu - Specimen height

-2.757
-1.2152
2.98
2.02

0.00
0.85
1.11
1.19
1.22
1.22
1.26
1.25
1.24
1.24
1.22
1.19
1.17
1.15
1.13
1.12
1.11
1.07
1.06
1.03
1.02
0.99
0.96
0.92
0.88
0.86
0.84
0.83
0.81
0.77
0.75
0.72
0.68
0.68
0.67
0.64
0.63
0.62
0.59
0.57

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.4

T - Sheet 24

Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh: KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
Project:
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.

B3-T1

S hiu mu - Sample No.

S th nghim - Procedure

B3-T1-04

su - Depth, m

8.2-8.9

CIU

Chiu cao mu - Initial height, cm

7.5;7.47

ng knh mu - Diameter, cm

3.75;3.73

3.00
First Trial

2.50

Deviator stress, q, kg/cm

Second Trial
Third Trial

2.00
1.50
1.00
0.50
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

2.00
1.80
1.60

u, kG/cm2

1.40
1.20
1.00

First Trial

0.80

Second Trial

0.60

Third Trial

0.40
0.20
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Bien dang - Strain, %

4.0
First Trial

t'

3.0

Second Trial
Kf-line

2.0

Third Trial

1.0

0.0
0.0

1.0

2.0

3.0

4.0

s'

5.0

6.0

7.0

8.0

Ph lc - Appendix 6.4
T - Sheet 25

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

B5-T1-05

S hiu LK - Boring No.

S th nghim - Procedure

B5-T1

su - Depth, m
Ngi TN - Tested by

9.6-10.0
Thinh

CU

Chiu cao mu - Initial Height, mm

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


17-07-09
18-07-'09
19-07-'09
19.3
21.6
23.8

Mu th - Specimen
Ngy TN - Tested Date
Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

2.05

2.08

2.03

Dung trng kh - Dry Density, g/cm 3

1.72

1.71

1.64

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

24.2

20.5

21.6

2.16

2.19

2.15

Dung trng kh - Dry Density, g/cm 3

1.74

1.82

1.77

Giai on bo ha

p lc NLR - P.W.P, kG/cm 2

0.00

0.00

0.00

Saturated Stage

p lc NLR b.ha - Saturated P.W.P, kG/cm 2

1.83

2.50

2.00

p lc nguc - Back pressure, kG/cm 2

2.00

2.5

2.0

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

Sau th nghim
After test

Giai on c kt

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

p lc NLR kt thc - Final P.W.P, kG/cm 2


Giai on nn

p lc bung - Cell pressure, kG/cm

2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

p lc ban u - Initial 3, kG/cm

Tc bin dng - Rate of Strain, mm/min

3.0

4.5

6.0

2.00

2.50

2.00

2.84

4.47

5.84

1.83

2.52

2.08

3.00

4.50

6.00

1.83

2.49

2.28

1.17

2.01

3.72

3.424

0.334

0.391

Trng thi ph hu

Bin dng - Strain, %

8.9

3.5

9.5

Failure Conditions

lch ng sut - Deviator stress, kPa

3.528

4.295

6.022

'3f, kG/cm2

0.862
4.390

1.279
5.574

2.440
8.462

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm2/s

0.310

0.734

1.283

4.59E-03

4.51E-04

5.27E-04

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

4.36E-02

3.33E-02

1.60E-02

Parameters

1.97E-07

1.47E-08

8.29E-09

Sc khng ct

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1914'

'

2559'

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.836

c'

0.698

ng suat cat - Shear Stress, kG/cm

6.0

4.5

3.0

1.5

0.0
0.0

1.5

3.0

4.5

6.0

7.5

9.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

10.5

12.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 26

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)


KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TIN

Mu - Specimen

B5-T1-05
Mu th 1 - First Trial

Ngy TN - Tested Date


Chiu di - Length,cm
Tit din - Area, cm2
Th tch - Volume, cm
T 100, min

Tf, min

Vf, mm/min

0
0.17
0.5
1
2
5
10
15
30
60
90

00-01-'00

7.60

7.49

7.60

7.44

7.60

7.45

11.01

11.34

10.85

11.34

10.89

86.19

82.43

86.19

80.70

86.19

81.06

2.1

3.28

21.0

33.44

17.9

28.59

1.00
AL NLR

Th tch, cm3

0.334

0.391

2.00

4.00

AL NLR

Th tch

AL NLR

10

11.34

Th tch, cm3

0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49

Mu th 3 - Third Trial

18-07-'09

3.424

t, min

9.6-10.0

Mu th 2 - Second Trial

17-07-'09

'3 Eff. Pressure, ksc


Thi gian
Time t,
min

su - Depth, m

Vol.Ch.

S hiu LK - Boring No

3
4

Th tch5

AL NLR

Volume
Volume
Volume6
Volume
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
2.84
0.00
4.47
0.00
5.84
1.05
2.72
0.74
4.38
0.55
5.84
1.98
2.54
1.10
4.25
0.85
5.72
2.59
2.36
1.45
4.14
1.19
5.58
7.0
3.17
2.12
1.94
3.98
1.72
5.19
3.62
1.88
2.85
3.69
2.73
4.49
6.0
3.72
1.84
3.75
3.39
3.64
3.72
5.0
3.76
1.83
4.32
3.16
4.16
3.20
3.80
1.83
5.13
2.75
4.84
2.43
4.0
5.50
2.55
5.20
2.08
3.0
5.58
2.52

SQRT(T)
A

P.W.P

Cng trnh - Project

2.0
1.0
0.1

10

Log (t)

100

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 27

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B5-T1-05
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
17-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
11.01
Tc ct - Rate
3.424 mm/min.
p lc nc l rng - Initial Pore Pressure

1.221
1.341
1.466
1.624
1.754
1.874
2.003
2.134
2.299
2.434
2.547
2.690
2.824
2.955
3.081
3.251
3.388
3.516
3.645
3.772
3.937
4.066
4.192
4.318
4.452
4.575
4.745
4.874
5.002
5.130
5.258
5.429
5.557
5.685
5.813
5.941
6.069
6.240
6.368
6.496
6.624

0.00
0.44
0.90
1.48
1.96
2.40
2.88
3.36
3.97
4.46
4.88
5.41
5.90
6.38
6.85
7.47
7.98
8.45
8.92
9.39
10.00
10.47
10.94
11.40
11.89
12.35
12.97
13.45
13.92
14.39
14.86
15.49
15.96
16.43
16.90
17.38
17.85
18.48
18.95
19.42
19.89

cm

p lc bung - Cell pressure

0.68
0.77
0.82
0.86
0.89
0.91
0.93
0.94
0.96
0.97
0.98
0.99
1.00
1.00
1.01
1.02
1.03
1.03
1.03
1.03
1.03
1.03
1.03
1.03
1.03
1.02
1.03
1.03
1.03
1.02
1.02
1.02
1.02
1.02
1.02
1.02
1.01
1.01
1.00
1.00
0.99

0.00
11.08
17.69
22.10
25.26
28.06
30.00
31.58
34.72
35.65
36.60
37.55
38.63
39.45
40.38
41.55
42.16
42.28
42.64
42.64
42.28
42.40
42.28
42.28
42.16
41.91
42.03
42.28
42.28
41.33
41.33
41.55
41.33
41.67
41.33
41.33
40.45
39.97
39.24
38.63
37.66

3.00

1.83
2.59
2.68
2.72
2.68
2.62
2.56
2.51
2.45
2.41
2.37
2.33
2.30
2.27
2.24
2.21
2.18
2.16
2.14
2.12
2.10
2.08
2.06
2.05
2.04
2.03
2.01
2.00
1.99
1.98
1.97
1.96
1.95
1.92
1.91
1.91
1.94
1.96
1.96
1.97
1.97

0.00
0.76
0.85
0.89
0.85
0.79
0.73
0.68
0.62
0.58
0.54
0.50
0.47
0.44
0.41
0.38
0.36
0.33
0.31
0.29
0.27
0.25
0.24
0.22
0.21
0.20
0.18
0.17
0.17
0.15
0.14
0.13
0.12
0.09
0.08
0.08
0.12
0.13
0.14
0.14
0.15

11.008
11.057
11.108
11.173
11.228
11.279
11.334
11.391
11.463
11.522
11.572
11.637
11.698
11.758
11.817
11.897
11.962
12.024
12.086
12.149
12.230
12.296
12.359
12.424
12.494
12.558
12.649
12.718
12.787
12.858
12.929
13.025
13.098
13.172
13.247
13.323
13.399
13.502
13.581
13.660
13.741

0.000
1.002
1.593
1.978
2.250
2.488
2.647
2.773
3.029
3.094
3.163
3.227
3.302
3.355
3.417
3.492
3.524
3.516
3.528
3.510
3.457
3.448
3.421
3.403
3.374
3.338
3.323
3.324
3.306
3.214
3.197
3.190
3.155
3.163
3.120
3.102
3.019
2.960
2.889
2.828
2.741

1.17
1.42
1.91
2.26
2.57
2.87
3.09
3.26
3.58
3.69
3.80
3.90
4.00
4.09
4.18
4.29
4.34
4.36
4.39
4.39
4.36
4.37
4.36
4.35
4.34
4.31
4.31
4.32
4.31
4.23
4.22
4.23
4.21
4.25
4.21
4.20
4.07
4.00
3.93
3.86
3.77

1.17
0.41
0.32
0.28
0.32
0.38
0.44
0.49
0.55
0.59
0.63
0.67
0.70
0.73
0.76
0.79
0.82
0.84
0.86
0.88
0.90
0.92
0.94
0.95
0.96
0.97
0.99
1.00
1.01
1.02
1.03
1.04
1.05
1.08
1.09
1.09
1.06
1.04
1.04
1.03
1.03

1.00
3.42
5.97
8.14
8.00
7.55
7.04
6.69
6.50
6.22
5.99
5.82
5.71
5.58
5.50
5.41
5.32
5.18
5.10
4.99
4.83
4.74
4.66
4.59
4.51
4.43
4.36
4.33
4.29
4.16
4.11
4.06
4.00
3.92
3.86
3.83
3.86
3.84
3.79
3.75
3.67

1.17
0.92
1.12
1.27
1.45
1.62
1.76
1.87
2.06
2.14
2.22
2.28
2.35
2.41
2.47
2.54
2.58
2.60
2.63
2.64
2.63
2.65
2.65
2.65
2.65
2.64
2.65
2.66
2.66
2.63
2.63
2.64
2.63
2.66
2.65
2.65
2.57
2.52
2.48
2.44
2.40

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading mV

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.49

'1
kPa

C.cao mu - Specimen height

-2.757
-1.215
1.17
1.83

0.00
0.50
0.80
0.99
1.13
1.24
1.32
1.39
1.51
1.55
1.58
1.61
1.65
1.68
1.71
1.75
1.76
1.76
1.76
1.76
1.73
1.72
1.71
1.70
1.69
1.67
1.66
1.66
1.65
1.61
1.60
1.59
1.58
1.58
1.56
1.55
1.51
1.48
1.44
1.41
1.37

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 28

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B5-T1-05
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
18-07-'09
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.85
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.334 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.852
10.898
10.953
11.011
11.068
11.128
11.186
11.241
11.302
11.361
11.421
11.481
11.543
11.606
11.667
11.727
11.791
11.855
11.917
11.991
12.055
12.124
12.192
12.260
12.328
12.398
12.468
12.539
12.611
12.684
12.758
12.832
12.918
12.995
13.072
13.150
13.229

1.00
2.76
3.31
3.70
3.98
4.16
4.29
4.36
4.32
4.29
4.27
4.23
4.19
4.15
4.10
4.05
4.04
4.00
3.96
3.91
3.87
3.84
3.80
3.76
3.73
3.70
3.69
3.66
3.62
3.58
3.54
3.53
3.51
3.48
3.42
3.41
3.37

2.01
3.18
3.21
3.24
3.30
3.34
3.39
3.43
3.43
3.43
3.43
3.44
3.46
3.47
3.48
3.50
3.53
3.54
3.54
3.54
3.55
3.56
3.56
3.55
3.54
3.53
3.54
3.54
3.52
3.52
3.50
3.51
3.50
3.48
3.45
3.43
3.40

kG/cm

t'= ('1-'3)/2

2.01
1.69
1.49
1.38
1.32
1.29
1.28
1.28
1.29
1.29
1.30
1.32
1.33
1.35
1.36
1.39
1.40
1.42
1.43
1.44
1.46
1.47
1.48
1.49
1.50
1.50
1.51
1.52
1.52
1.54
1.54
1.55
1.55
1.56
1.56
1.56
1.56

2.01
4.66
4.93
5.11
5.27
5.39
5.49
5.57
5.57
5.56
5.56
5.57
5.59
5.59
5.60
5.61
5.66
5.66
5.65
5.64
5.63
5.65
5.63
5.60
5.59
5.56
5.57
5.56
5.52
5.51
5.47
5.47
5.45
5.41
5.34
5.31
5.24

kG/cm

0.000
2.969
3.443
3.727
3.950
4.093
4.210
4.295
4.283
4.265
4.258
4.257
4.253
4.242
4.234
4.229
4.256
4.247
4.225
4.196
4.176
4.178
4.146
4.113
4.090
4.061
4.062
4.039
3.998
3.969
3.924
3.923
3.897
3.853
3.779
3.757
3.685

s'= ('1+'3)/2

'3
kPa

0.00
0.32
0.52
0.63
0.69
0.72
0.73
0.73
0.72
0.72
0.71
0.70
0.68
0.67
0.65
0.63
0.61
0.60
0.58
0.57
0.55
0.54
0.53
0.52
0.51
0.51
0.50
0.49
0.49
0.48
0.47
0.46
0.46
0.46
0.45
0.46
0.46

T.din hiu chnh


2
Corr. A cm

2.49
2.81
3.01
3.12
3.18
3.21
3.22
3.22
3.21
3.21
3.20
3.18
3.17
3.15
3.14
3.11
3.10
3.08
3.07
3.06
3.04
3.03
3.02
3.01
3.00
3.00
2.99
2.98
2.98
2.96
2.96
2.95
2.95
2.94
2.94
2.94
2.94

'1
kPa

0.00
32.36
37.71
41.04
43.72
45.55
47.09
48.28
48.40
48.45
48.63
48.88
49.10
49.23
49.40
49.59
50.18
50.35
50.35
50.31
50.35
50.65
50.54
50.42
50.42
50.35
50.65
50.65
50.42
50.35
50.07
50.35
50.35
50.07
49.40
49.40
48.75

4.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.50
0.76
0.81
0.83
0.86
0.87
0.88
0.89
0.89
0.89
0.90
0.90
0.90
0.90
0.90
0.90
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.90
0.90
0.90

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.42
0.92
1.45
1.95
2.48
2.98
3.46
3.98
4.48
4.98
5.48
5.98
6.49
6.98
7.46
7.96
8.46
8.94
9.49
9.98
10.49
10.99
11.48
11.97
12.47
12.96
13.46
13.95
14.44
14.94
15.43
15.99
16.49
16.98
17.48
17.97

cm

p lc NLR
Pore Pressure
2
kG/cm

1.185
1.299
1.432
1.575
1.711
1.853
1.989
2.119
2.258
2.394
2.528
2.663
2.799
2.936
3.068
3.198
3.333
3.467
3.595
3.746
3.876
4.015
4.149
4.282
4.415
4.548
4.681
4.814
4.948
5.081
5.214
5.347
5.499
5.633
5.766
5.899
6.032

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.44

'1/'3

C.cao mu - Specimen height

-2.757
-1.215
2.01
2.49

0.00
1.48
1.72
1.86
1.98
2.05
2.10
2.15
2.14
2.13
2.13
2.13
2.13
2.12
2.12
2.11
2.13
2.12
2.11
2.10
2.09
2.09
2.07
2.06
2.04
2.03
2.03
2.02
2.00
1.98
1.96
1.96
1.95
1.93
1.89
1.88
1.84

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 29

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B5-T1-05
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
00-01-'00
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.89
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.391 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.885
10.939
10.991
11.046
11.098
11.160
11.216
11.273
11.335
11.398
11.450
11.517
11.571
11.631
11.701
11.768
11.819
11.886
11.959
12.023
12.088
12.154
12.225
12.293
12.364
12.425
12.503
12.583
12.654
12.725
12.797
12.882
12.955
13.030
13.105
13.181
13.272

1.00
1.76
2.24
2.65
3.03
3.27
3.40
3.49
3.55
3.59
3.57
3.62
3.60
3.61
3.61
3.56
3.54
3.53
3.47
3.47
3.39
3.35
3.28
3.27
3.26
3.20
3.20
3.14
3.13
3.07
3.06
3.01
2.97
2.96
2.86
2.80
2.77

3.72
4.53
4.56
4.51
4.53
4.50
4.52
4.57
4.66
4.75
4.82
4.96
5.03
5.14
5.23
5.28
5.33
5.38
5.40
5.45
5.42
5.44
5.41
5.44
5.48
5.44
5.45
5.41
5.40
5.35
5.35
5.29
5.26
5.25
5.13
5.02
4.96

kG/cm

t'= ('1-'3)/2

3.72
3.29
2.81
2.47
2.25
2.11
2.06
2.04
2.05
2.07
2.11
2.15
2.19
2.23
2.27
2.32
2.35
2.38
2.41
2.44
2.47
2.50
2.53
2.55
2.57
2.59
2.60
2.61
2.62
2.63
2.63
2.64
2.65
2.65
2.66
2.64
2.63

3.72
5.78
6.31
6.54
6.81
6.90
6.99
7.11
7.27
7.43
7.53
7.78
7.87
8.05
8.20
8.24
8.31
8.39
8.39
8.46
8.38
8.37
8.29
8.34
8.38
8.29
8.31
8.21
8.19
8.08
8.07
7.94
7.87
7.84
7.61
7.40
7.29

kG/cm

0.000
2.486
3.491
4.073
4.564
4.789
4.937
5.075
5.220
5.356
5.415
5.629
5.685
5.818
5.928
5.926
5.966
6.010
5.973
6.022
5.909
5.877
5.764
5.791
5.807
5.700
5.715
5.599
5.572
5.451
5.437
5.300
5.223
5.194
4.947
4.755
4.659

s'= ('1+'3)/2

'3
kPa

0.00
0.43
0.91
1.25
1.47
1.61
1.67
1.69
1.68
1.65
1.61
1.57
1.53
1.50
1.45
1.41
1.38
1.35
1.31
1.28
1.25
1.23
1.20
1.18
1.15
1.13
1.13
1.11
1.10
1.09
1.09
1.08
1.07
1.07
1.06
1.08
1.10

T.din hiu chnh


2
Corr. A cm

2.28
2.71
3.19
3.53
3.75
3.89
3.94
3.96
3.95
3.93
3.89
3.85
3.81
3.77
3.73
3.68
3.65
3.62
3.59
3.56
3.53
3.50
3.47
3.45
3.43
3.41
3.40
3.39
3.38
3.37
3.37
3.36
3.35
3.35
3.34
3.36
3.37

'1
kPa

0.00
27.20
38.36
44.99
50.65
53.45
55.38
57.21
59.17
61.05
62.00
64.83
65.78
67.68
69.37
69.73
70.51
71.43
71.43
72.40
71.43
71.43
70.46
71.19
71.80
70.82
71.46
70.46
70.51
69.37
69.57
68.27
67.66
67.68
64.83
62.68
61.83

6.00

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.68
0.90
1.00
1.05
1.10
1.12
1.14
1.15
1.17
1.18
1.19
1.21
1.22
1.24
1.25
1.25
1.26
1.27
1.27
1.28
1.27
1.27
1.26
1.27
1.27
1.26
1.27
1.26
1.26
1.25
1.25
1.24
1.24
1.24
1.21
1.20
1.19

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.49
0.96
1.46
1.91
2.46
2.95
3.44
3.97
4.50
4.93
5.49
5.92
6.41
6.97
7.50
7.90
8.42
8.98
9.47
9.95
10.44
10.96
11.45
11.96
12.39
12.94
13.49
13.98
14.46
14.94
15.50
15.98
16.46
16.94
17.42
17.98

cm

p lc NLR
Pore Pressure
2
kG/cm

1.192
1.324
1.452
1.585
1.709
1.856
1.989
2.121
2.265
2.407
2.525
2.675
2.792
2.925
3.075
3.218
3.326
3.467
3.616
3.749
3.880
4.012
4.152
4.285
4.424
4.539
4.687
4.837
4.967
5.097
5.227
5.378
5.508
5.638
5.768
5.898
6.049

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.45

'1/'3

C.cao mu - Specimen height

-2.757
-1.215
3.72
2.28

0.00
1.24
1.75
2.04
2.28
2.39
2.47
2.54
2.61
2.68
2.71
2.81
2.84
2.91
2.96
2.96
2.98
3.00
2.99
3.01
2.95
2.94
2.88
2.90
2.90
2.85
2.86
2.80
2.79
2.73
2.72
2.65
2.61
2.60
2.47
2.38
2.33

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 30

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu LK - Boring No.

B5-T1

S hiu mu - Sample No.

S th nghim - Procedure

CIU

B5-T1-05

Chiu cao mu - Initial height, cm

7.49;7.44

9.6-10.0

ng knh mu - Diameter, cm

3.74;3.72

su - Depth, m

7.00

Deviator stress, q, kg/cm

6.00
5.00
4.00
3.00

First Trial

2.00

Second Trial

1.00

Third Trial

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

u, kG/cm2

1.80
1.60

First Trial

1.40

Second Trial

1.20

Third Trial

1.00
0.80
0.60
0.40
0.20
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Bien dang - Strain, %

6.0
First Trial

4.5

Second Trial

t'

Kf-line

3.0

Third Trial

1.5

0.0
0.0

1.5

3.0

4.5

6.0

s'

7.5

9.0

10.5

12.0

Ph lc - Appendix 6.4
T - Sheet 31

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

B7-T1

S hiu LK - Boring No.

S th nghim - Procedure

B7

su - Depth, m
Ngi TN - Tested by

3.7-4.6
Thinh

Ngy TN - Tested Date


Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

After test
Giai on bo ha
Saturated Stage

Giai on c kt

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


19-12-08
20-12-'08
21-12-'08
39.4
41.7
41.9

Mu th - Specimen

Sau th nghim

1.85
1.33

1.30

1.25

33.4

35.7

33.2

2.02

2.09

2.00

Dung trng kh - Dry Density, g/cm 3

1.51

1.54

1.50

0.00

0.00

0.00

2.44

3.85

2.48

p lc NLR - P.W.P, kG/cm 2


p lc NLR b.ha - Saturated P.W.P, kG/cm

p lc nguc - Back pressure, kG/cm 2

2.50

4.0

2.5

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

3.5

6.0

5.5

2.50

4.00

2.50

3.40

5.80

5.25

p lc NLR kt thc - Final P.W.P, kG/cm 2

2.44

3.88

2.50

p lc bung - Cell pressure, kG/cm 2

3.50

6.00

5.50

2.34

3.84

2.60

1.16

2.16

2.90

0.431

0.011

0.048

3.8

2.8

3.1

p lc ban u - Initial 3, kG/cm2


Tc bin dng - Rate of Strain, mm/min
Failure Conditions

1.77

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

Trng thi ph hu

1.84

Dung trng kh - Dry Density, g/cm 3

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

Giai on nn

CU

Chiu cao mu - Initial Height, mm

Bin dng - Strain, %


lch ng sut - Deviator stress, kPa

1.041

1.614

2.134

'3f, kG/cm2

0.592
1.633

1.110
2.724

1.426
3.559

0.570

1.054

1.473

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
2

Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm /s

5.89E-04

1.50E-05

6.69E-05

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

9.91E-02

5.15E-02

5.46E-02

Parameters

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

5.73E-08

7.56E-10

3.58E-09

Sc khng ct

1347'

'

2305'

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.117

c'

0.083

ng suat cat - Shear Stress, kG/cm

4.0

3.0

2.0

1.0

0.0
0.0

1.0

2.0

3.0

4.0

5.0

6.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

7.0

8.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 32

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)


Cng trnh - Project
S hiu LK - Boring No
Mu - Specimen

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
B7-T1

su - Depth, m

Mu th 1 - First Trial

Ngy TN - Tested Date

Mu th 2 - Second Trial

19-12-'08

SQRT(T)

Mu th 3 - Third Trial

20-12-'08

21-12-'08

7.36

7.60

7.35

7.60

7.22

11.34

10.62

11.34

10.59

11.34

10.21

Th tch - Volume, cm3

86.19

78.18

86.19

77.85

86.19

73.70

16.0

25.59

631.1

1006.35

141.3

225.38

Tf, min

Vf, mm/min

0.431

'3 Eff. Pressure, ksc


Thi gian
Time t,
min
0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240
480
720
960
1440

1.00
Th tch, cm

t, min
0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49
21.91
26.83
30.98
37.95

AL NLR

Th tch, cm

0.011

0.048

2.00

3.00

AL NLR

Th tch

AL NLR

Vol.Ch.

7.60

Tit din - Area, cm2


T 100, min

10

15

20

25

30

35

40

8
10

Th tch
12

AL NLR

Volume
Volume
Volume
Volume
14
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
3.40
0.00
5.80
0.00
5.25
1.01
3.39
0.01
5.80
0.20
5.25
2.22
3.36
0.02
5.80
0.45
5.24
3.52
3.32
0.18
5.80
0.80
5.22
7.0
4.64
3.29
0.33
5.80
1.22
5.19
5.44
3.25
0.69
5.79
2.21
5.10
6.0
6.07
3.20
1.08
5.77
3.36
4.92
5.0
6.48
3.15
1.37
5.74
4.19
4.67
7.15
2.99
2.20
5.62
5.85
4.06
4.0
7.70
2.73
3.50
5.23
7.73
3.54
7.95
2.60
4.45
4.87
8.97
3.29
3.0
8.08
2.54
5.10
4.62
9.80
3.13
2.0
8.17
2.47
5.98
4.35
10.95
2.91
8.19
2.46
6.56
4.21
11.58
2.77
1.0
8.16
2.44
7.26
4.05
12.30
2.62
0.1
1
8.12
2.44
7.67
3.98
12.61
2.56
8.10
3.91
12.92
2.51
8.32
3.89
12.88
2.50
8.54
3.88

P.W.P

Chiu di - Length,cm

3.7-4.6

10

100

1000

Log (t)
A

10000

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 33

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B7-T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
1
Ngy TN - Testing Date
19-12-'08
H s cm bin lc - Loadcell Factor, kG/mV #######
cm2
p lc c hiu - Initial Effective stress
1.16
Tit din - Area
10.62
Tc ct - Rate
0.431 mm/min.
p lc nc l rng - Initial Pore Pressure
2.34

0.000
0.357
0.731
1.148
1.565
1.968
2.370
2.801
3.215
3.667
4.098
4.550
4.951
5.361
5.776
6.184
6.611
7.028
7.434
7.844
8.277
8.713
9.172
9.609
10.027
10.425
10.843
11.258
11.684
12.106
12.495

0.00
0.49
0.99
1.56
2.13
2.67
3.22
3.81
4.37
4.98
5.57
6.18
6.73
7.29
7.85
8.40
8.98
9.55
10.10
10.66
11.25
11.84
12.46
13.06
13.62
14.17
14.73
15.30
15.88
16.45
16.98

cm

p lc bung - Cell pressure

0.07
0.12
0.15
0.17
0.18
0.18
0.19
0.19
0.19
0.19
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17
0.17

0.00
4.81
7.68
9.35
10.78
11.02
11.26
11.50
11.26
11.26
11.02
11.02
10.78
10.78
10.54
10.54
10.30
10.07
9.83
9.83
9.83
9.83
9.83
9.59
9.59
9.59
9.59
9.35
9.35
9.35
9.35

3.50

2.34
2.38
2.58
2.70
2.80
2.85
2.89
2.91
2.92
2.93
2.93
2.93
2.93
2.93
2.93
2.93
2.93
2.94
2.94
2.94
2.95
2.95
2.96
2.97
2.97
2.97
2.97
2.98
2.98
2.98
2.99

0.00
0.04
0.24
0.36
0.46
0.51
0.55
0.57
0.58
0.59
0.59
0.59
0.59
0.59
0.59
0.60
0.59
0.60
0.60
0.61
0.62
0.62
0.62
0.63
0.63
0.64
0.64
0.64
0.65
0.65
0.65

10.623
10.675
10.729
10.791
10.854
10.915
10.976
11.043
11.108
11.180
11.249
11.323
11.389
11.458
11.528
11.597
11.671
11.744
11.816
11.890
11.969
12.049
12.135
12.218
12.298
12.376
12.458
12.541
12.628
12.714
12.795

0.000
0.451
0.716
0.866
0.993
1.010
1.026
1.041
1.014
1.007
0.980
0.973
0.947
0.941
0.915
0.909
0.883
0.857
0.832
0.826
0.821
0.816
0.810
0.785
0.780
0.775
0.770
0.745
0.740
0.735
0.731

1.16
1.57
1.64
1.66
1.70
1.66
1.64
1.63
1.60
1.58
1.55
1.54
1.52
1.51
1.49
1.48
1.45
1.42
1.39
1.38
1.37
1.36
1.35
1.32
1.31
1.30
1.29
1.27
1.26
1.25
1.24

1.16
1.12
0.92
0.80
0.70
0.65
0.61
0.59
0.58
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.56
0.56
0.56
0.55
0.55
0.54
0.53
0.53
0.53
0.53
0.52
0.52
0.52
0.51

1.00
1.40
1.78
2.09
2.41
2.56
2.68
2.76
2.74
2.75
2.71
2.70
2.66
2.65
2.60
2.60
2.56
2.52
2.49
2.49
2.50
2.49
2.50
2.47
2.47
2.47
2.47
2.43
2.43
2.43
2.42

1.16
1.35
1.28
1.23
1.20
1.15
1.13
1.11
1.09
1.08
1.06
1.06
1.04
1.04
1.03
1.02
1.01
0.99
0.98
0.97
0.96
0.95
0.94
0.93
0.92
0.91
0.91
0.89
0.89
0.88
0.88

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading mV

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.36

'1
kPa

C.cao mu - Specimen height

0.00
0.23
0.36
0.43
0.50
0.50
0.51
0.52
0.51
0.50
0.49
0.49
0.47
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.41
0.41
0.40
0.39
0.39
0.39
0.38
0.37
0.37
0.37
0.37

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 34

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B7-T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
20-12-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
10.59
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.011 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.592
10.652
10.710
10.770
10.833
10.895
10.962
11.026
11.094
11.161
11.229
11.294
11.363
11.435
11.502
11.572
11.641
11.715
11.792
11.870
11.949
12.027
12.106
12.184
12.265
12.344
12.424
12.504
12.586
12.673
12.760
12.852
12.945
13.034
13.129
13.222

1.00
1.65
2.00
2.20
2.34
2.45
2.48
2.55
2.58
2.62
2.62
2.63
2.65
2.65
2.67
2.67
2.70
2.68
2.68
2.70
2.67
2.65
2.65
2.65
2.65
2.65
2.66
2.67
2.65
2.62
2.62
2.58
2.59
2.57
2.56
2.53

2.16
2.22
2.10
2.03
1.97
1.92
1.86
1.83
1.80
1.76
1.72
1.69
1.67
1.65
1.64
1.63
1.60
1.60
1.57
1.55
1.53
1.51
1.50
1.49
1.48
1.47
1.45
1.44
1.44
1.42
1.41
1.40
1.39
1.37
1.36
1.35

kG/cm

t'= ('1-'3)/2

2.16
1.67
1.40
1.27
1.18
1.11
1.07
1.03
1.00
0.97
0.95
0.93
0.91
0.90
0.89
0.89
0.87
0.87
0.85
0.84
0.83
0.83
0.82
0.81
0.81
0.81
0.80
0.79
0.79
0.79
0.78
0.78
0.77
0.77
0.77
0.77

2.16
2.76
2.80
2.79
2.76
2.72
2.65
2.62
2.59
2.55
2.50
2.45
2.42
2.40
2.38
2.37
2.34
2.33
2.28
2.26
2.22
2.19
2.17
2.16
2.15
2.14
2.11
2.10
2.09
2.06
2.05
2.02
2.00
1.97
1.96
1.93

kG/cm

0.000
1.091
1.397
1.522
1.579
1.614
1.582
1.595
1.585
1.576
1.545
1.515
1.506
1.496
1.487
1.478
1.470
1.460
1.431
1.421
1.392
1.363
1.354
1.345
1.337
1.328
1.319
1.311
1.302
1.275
1.266
1.238
1.229
1.203
1.194
1.168

s'= ('1+'3)/2

'3
kPa

0.00
0.49
0.76
0.90
0.98
1.05
1.09
1.14
1.16
1.19
1.21
1.23
1.25
1.26
1.27
1.28
1.30
1.30
1.31
1.33
1.33
1.34
1.35
1.35
1.35
1.36
1.37
1.38
1.37
1.38
1.38
1.38
1.39
1.40
1.40
1.40

T.din hiu chnh


2
Corr. A cm

3.84
4.33
4.60
4.73
4.82
4.89
4.93
4.97
5.00
5.03
5.05
5.07
5.09
5.10
5.11
5.11
5.13
5.13
5.15
5.16
5.17
5.17
5.18
5.19
5.19
5.19
5.20
5.21
5.21
5.21
5.22
5.22
5.23
5.23
5.23
5.23

'1
kPa

0.00
11.62
14.96
16.39
17.11
17.59
17.35
17.59
17.59
17.59
17.35
17.11
17.11
17.11
17.11
17.11
17.11
17.11
16.87
16.87
16.63
16.39
16.39
16.39
16.39
16.39
16.39
16.39
16.39
16.15
16.15
15.91
15.91
15.68
15.68
15.44

6.00

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.07
0.19
0.22
0.23
0.24
0.25
0.24
0.25
0.25
0.25
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.22

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.56
1.10
1.65
2.22
2.78
3.37
3.93
4.52
5.10
5.67
6.21
6.78
7.37
7.91
8.46
9.01
9.58
10.17
10.76
11.35
11.92
12.50
13.06
13.64
14.19
14.74
15.29
15.84
16.42
16.99
17.58
18.17
18.73
19.32
19.88

cm

p lc NLR
Pore Pressure
2
kG/cm

0.000
0.408
0.809
1.212
1.632
2.042
2.480
2.888
3.324
3.746
4.167
4.564
4.983
5.414
5.813
6.219
6.622
7.044
7.475
7.911
8.342
8.764
9.188
9.598
10.022
10.430
10.833
11.237
11.642
12.064
12.486
12.919
13.355
13.765
14.199
14.614

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.35

'1/'3

C.cao mu - Specimen height

1
-100.0000
2.16
3.84

0.00
0.55
0.70
0.76
0.79
0.81
0.79
0.80
0.79
0.79
0.77
0.76
0.75
0.75
0.74
0.74
0.73
0.73
0.72
0.71
0.70
0.68
0.68
0.67
0.67
0.66
0.66
0.66
0.65
0.64
0.63
0.62
0.61
0.60
0.60
0.58

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 35

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B7-T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
21-12-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
10.21
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.048 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.208
10.259
10.322
10.390
10.461
10.529
10.599
10.670
10.746
10.819
10.896
10.971
11.051
11.127
11.211
11.294
11.375
11.456
11.538
11.625
11.712
11.801
11.895
11.983
12.077
12.173
12.271
12.368
12.463
12.560
12.659

1.00
1.26
1.85
2.14
2.36
2.50
2.57
2.64
2.70
2.72
2.74
2.76
2.77
2.79
2.81
2.89
2.88
2.89
2.88
2.87
2.86
2.81
2.78
2.80
2.84
2.85
2.87
2.89
2.85
2.80
2.77

2.90
2.51
2.68
2.63
2.57
2.49
2.41
2.34
2.27
2.22
2.17
2.12
2.07
2.05
2.02
2.03
2.02
1.97
1.96
1.93
1.91
1.85
1.83
1.81
1.82
1.82
1.79
1.81
1.76
1.75
1.73

kG/cm

t'= ('1-'3)/2

2.90
2.21
1.89
1.68
1.53
1.43
1.35
1.28
1.23
1.19
1.16
1.13
1.10
1.08
1.06
1.04
1.04
1.02
1.01
1.00
0.99
0.97
0.97
0.95
0.95
0.95
0.93
0.93
0.91
0.92
0.92

2.90
2.80
3.48
3.59
3.61
3.56
3.47
3.39
3.32
3.25
3.18
3.11
3.05
3.01
2.98
3.01
2.99
2.93
2.92
2.87
2.83
2.73
2.70
2.67
2.69
2.69
2.66
2.69
2.60
2.58
2.54

kG/cm

0.000
0.584
1.598
1.910
2.079
2.134
2.120
2.106
2.091
2.054
2.018
1.983
1.947
1.933
1.919
1.968
1.954
1.919
1.906
1.871
1.837
1.762
1.728
1.715
1.742
1.747
1.734
1.759
1.688
1.656
1.624

s'= ('1+'3)/2

'3
kPa

0.00
0.68
1.01
1.22
1.37
1.47
1.55
1.61
1.67
1.71
1.74
1.77
1.80
1.82
1.84
1.86
1.86
1.88
1.89
1.90
1.91
1.93
1.93
1.94
1.95
1.95
1.97
1.97
1.98
1.98
1.98

T.din hiu chnh


2
Corr. A cm

2.60
3.29
3.61
3.82
3.97
4.07
4.15
4.22
4.27
4.31
4.34
4.37
4.40
4.42
4.44
4.46
4.46
4.48
4.49
4.50
4.51
4.53
4.53
4.55
4.55
4.55
4.57
4.57
4.59
4.58
4.58

'1
kPa

0.00
5.99
16.50
19.84
21.75
22.47
22.47
22.47
22.47
22.23
21.99
21.75
21.51
21.51
21.51
22.23
22.23
21.99
21.99
21.75
21.51
20.80
20.56
20.56
21.03
21.27
21.27
21.75
21.03
20.80
20.56

5.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.15
0.21
0.32
0.35
0.37
0.38
0.38
0.38
0.38
0.37
0.37
0.37
0.37
0.37
0.37
0.37
0.37
0.37
0.37
0.37
0.37
0.36
0.36
0.36
0.36
0.37
0.37
0.37
0.36
0.36
0.36

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.50
1.10
1.75
2.42
3.06
3.69
4.33
5.01
5.65
6.31
6.96
7.63
8.26
8.95
9.62
10.26
10.90
11.53
12.19
12.84
13.50
14.18
14.81
15.48
16.15
16.81
17.47
18.09
18.73
19.36

cm

p lc NLR
Pore Pressure
2
kG/cm

0.000
0.362
0.798
1.265
1.747
2.206
2.667
3.126
3.614
4.080
4.559
5.023
5.507
5.965
6.461
6.943
7.408
7.867
8.323
8.800
9.271
9.748
10.239
10.695
11.175
11.659
12.140
12.613
13.065
13.521
13.980

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.22

'1/'3

C.cao mu - Specimen height

1
-100.0000
2.90
2.60

0.00
0.29
0.80
0.95
1.04
1.07
1.06
1.05
1.05
1.03
1.01
0.99
0.97
0.97
0.96
0.98
0.98
0.96
0.95
0.94
0.92
0.88
0.86
0.86
0.87
0.87
0.87
0.88
0.84
0.83
0.81

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 36

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu LK - Boring No.

B7

S hiu mu - Sample No.


su - Depth, m

S th nghim - Procedure

CIU

B7-T1

Chiu cao mu - Initial height, cm


7.36;7.35;7.22

3.7-4.6

ng knh mu - Diameter, cm3.68;3.67;3.61

Deviator stress, q, kg/cm

2.50
2.00
1.50
1.00
First Trial

0.50

Second Trial
Third Trial

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

2.25
2.00
1.75

u, kG/cm2

1.50
1.25
1.00

First Trial

0.75

Second Trial

0.50

Third Trial

0.25
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Bien dang - Strain, %

4.00
First Trial
3.00

Second Trial

Kf-line
Third Trial

2.00

1.00

0.00
0.0

1.0

2.0

3.0

4.0

s'

5.0

6.0

7.0

8.0

Ph lc - Appendix 6.4
T - Sheet 37

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

BB9-T1-06

S hiu LK - Boring No.

S th nghim - Procedure

BB9-T

su - Depth, m
Ngi TN - Tested by

11.3-12.10
Thinh

CU

Chiu cao mu - Initial Height, mm

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


17-07-09
18-07-'09
19-07-'09
38.8
38.0
39.3

Mu th - Specimen
Ngy TN - Tested Date
Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

1.82

1.84

1.84

Dung trng kh - Dry Density, g/cm 3

1.31

1.33

1.32

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

37.9

37.5

37.6

1.88

1.92

1.96

Dung trng kh - Dry Density, g/cm 3

1.37

1.40

1.42

Giai on bo ha

p lc NLR - P.W.P, kG/cm 2

0.00

0.00

0.00

Saturated Stage

p lc NLR b.ha - Saturated P.W.P, kG/cm 2

1.95

1.97

2.44

p lc nguc - Back pressure, kG/cm 2

2.00

2.0

2.5

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95

0.95

Sau th nghim
After test

Giai on c kt

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

p lc NLR kt thc - Final P.W.P, kG/cm 2


p lc bung - Cell pressure, kG/cm

Giai on nn

2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

p lc ban u - Initial 3, kG/cm

Tc bin dng - Rate of Strain, mm/min

3.0

4.0

5.5

2.00

2.00

2.50

2.91

3.87

5.60

1.98

2.02

2.58

3.00

4.00

5.50

2.00

2.05

2.58

1.00

1.95

2.92

0.096

0.037

0.028

Trng thi ph hu

Bin dng - Strain, %

4.5

7.1

7.5

Failure Conditions

lch ng sut - Deviator stress, kPa

1.241

1.754

2.310

'3f, kG/cm2

0.520
1.761

0.941
2.695

1.273
3.583

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm2/s

0.484

1.004

1.648

1.29E-04

5.03E-05

3.86E-05

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

6.13E-02

3.83E-02

3.24E-02

Parameters

7.74E-09

1.89E-09

1.23E-09

Sc khng ct

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1236'

'

2426'

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.271

c'

0.155

ng suat cat - Shear Stress, kG/cm

4.0

3.0

2.0

1.0

0.0
0.0

1.0

2.0

3.0

4.0

5.0

6.0

Cac ng suat chnh - Principal Stresses, kG/cm

7.0

8.0

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 38

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)

Mu - Specimen

BB9-T1-06

su - Depth, m

Mu th 1 - First Trial

Ngy TN - Tested Date


Chiu di - Length,cm

11.3-12.10

Mu th 2 - Second Trial

17-07-'09

18-07-'09

7.60

7.46

7.60

7.42

7.60

7.35

11.34

10.91

11.34

10.80

11.34

10.60

Th tch - Volume, cm3

86.19

81.33

86.19

80.18

86.19

77.95

73.4

117.03

187.7

299.36

244.6

390.03

Tf, min

Vf, mm/min

0.096

'3 Eff. Pressure, ksc


Thi gian
Time t,
min
0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240
360
480
960

1.00
Th tch, cm3

t, min
0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49
18.97
21.91
30.98

AL NLR

Th tch, cm3

0.037

0.028

2.00

3.00

AL NLR

00-01-'00

Tit din - Area, cm2


T 100, min

SQRT(T)

Mu th 3 - Third Trial

Th tch

AL NLR

10

15

20

25

30

35

0
1
2
3
Vol.Ch.

S hiu LK - Boring No

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

4
5
6
7

Th tch
8

AL NLR

Volume
Volume
Volume
Volume
9
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
2.91
0.00
3.87
0.00
5.60
0.24
2.89
0.20
3.86
0.24
5.57
0.36
2.84
0.26
3.83
0.33
5.57
0.49
2.79
0.33
3.81
0.41
5.56
6.0
0.69
2.74
0.44
3.77
0.53
5.55
5.5
1.14
2.67
0.70
3.71
0.81
5.53
5.0
1.69
2.60
1.05
3.65
1.18
5.48
4.5
2.13
2.54
1.36
3.59
1.52
5.43
4.0
3.07
2.41
2.14
3.43
2.39
5.24
3.5
4.11
2.20
3.29
3.14
3.77
4.98
3.0
4.59
2.07
4.10
2.87
4.80
4.62
2.5
4.81
2.01
4.67
2.66
5.60
4.24
2.0
4.92
1.98
5.36
2.38
6.68
3.62
1.5
5.71
2.08
7.31
3.22
1.0
6.02
2.08
7.91
2.84
0.1
1
6.10
2.04
8.16
2.71
6.11
2.02
8.34
2.62
8.42
2.59
2.58

P.W.P

Cng trnh - Project

10

100

1000

Log (t)
A

10000

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 39

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
BB9-T1-06
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
17-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
10.91
Tc ct - Rate
0.096 mm/min.
p lc nc l rng - Initial Pore Pressure

1.200
1.322
1.466
1.605
1.741
1.872
2.007
2.136
2.274
2.413
2.548
2.685
2.822
2.953
3.093
3.226
3.364
3.497
3.634
3.766
3.905
4.031
4.174
4.305
4.445
4.563
4.715
4.851
4.986
5.122
5.252
5.387
5.523
5.658

0.00
0.45
0.98
1.50
2.00
2.48
2.98
3.46
3.97
4.48
4.98
5.49
5.99
6.48
7.00
7.49
8.00
8.49
9.00
9.49
10.00
10.47
11.00
11.48
12.00
12.43
13.00
13.50
14.00
14.50
14.98
15.48
15.98
16.48

cm

p lc bung - Cell pressure

0.62
0.65
0.68
0.69
0.70
0.71
0.72
0.73
0.73
0.74
0.74
0.74
0.73
0.73
0.73
0.73
0.73
0.73
0.73
0.73
0.73
0.72
0.72
0.71
0.71
0.71
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.69

0.00
3.78
6.61
8.49
9.67
10.72
11.85
12.64
13.62
14.17
14.01
13.70
13.46
13.46
13.22
13.22
13.22
13.19
13.15
12.92
12.48
11.90
11.39
10.92
10.52
10.26
9.90
9.67
9.52
9.32
9.20
9.04
8.85
8.53

3.00

2.00
2.25
2.35
2.41
2.44
2.47
2.48
2.48
2.48
2.48
2.47
2.47
2.45
2.44
2.43
2.42
2.41
2.40
2.40
2.39
2.38
2.37
2.36
2.37
2.37
2.37
2.37
2.38
2.38
2.38
2.38
2.37
2.37
2.37

0.00
0.26
0.35
0.41
0.45
0.47
0.48
0.49
0.49
0.48
0.48
0.47
0.46
0.45
0.43
0.43
0.41
0.41
0.40
0.39
0.39
0.37
0.37
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38
0.38

10.910
10.959
11.018
11.075
11.132
11.187
11.245
11.301
11.360
11.421
11.482
11.543
11.605
11.666
11.730
11.793
11.858
11.922
11.988
12.053
12.122
12.185
12.257
12.324
12.397
12.458
12.539
12.612
12.685
12.760
12.832
12.908
12.985
13.063

0.000
0.345
0.600
0.767
0.869
0.958
1.054
1.118
1.199
1.241
1.220
1.186
1.160
1.154
1.127
1.121
1.115
1.106
1.097
1.072
1.030
0.976
0.929
0.886
0.849
0.823
0.790
0.767
0.750
0.730
0.717
0.700
0.681
0.653

1.00
1.09
1.25
1.36
1.43
1.49
1.58
1.64
1.72
1.76
1.75
1.72
1.71
1.71
1.70
1.70
1.70
1.70
1.70
1.68
1.65
1.61
1.56
1.51
1.47
1.45
1.42
1.39
1.37
1.35
1.34
1.33
1.31
1.28

1.00
0.75
0.65
0.59
0.56
0.53
0.52
0.52
0.52
0.52
0.53
0.53
0.55
0.56
0.57
0.58
0.59
0.60
0.60
0.61
0.62
0.63
0.64
0.63
0.63
0.63
0.63
0.62
0.62
0.62
0.62
0.63
0.63
0.63

1.00
1.46
1.92
2.30
2.56
2.79
3.01
3.16
3.32
3.38
3.31
3.22
3.12
3.08
2.97
2.94
2.89
2.85
2.82
2.75
2.66
2.55
2.46
2.41
2.36
2.31
2.26
2.23
2.20
2.17
2.15
2.12
2.09
2.04

1.00
0.92
0.95
0.97
0.99
1.01
1.05
1.08
1.12
1.14
1.14
1.13
1.13
1.13
1.13
1.14
1.15
1.15
1.15
1.15
1.13
1.12
1.10
1.07
1.05
1.04
1.02
1.01
1.00
0.99
0.98
0.98
0.97
0.95

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading mV

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.46

'1
kPa

C.cao mu - Specimen height

-2.757
-1.215
1.00
2.00

0.00
0.17
0.30
0.38
0.43
0.48
0.53
0.56
0.60
0.62
0.61
0.59
0.58
0.58
0.56
0.56
0.56
0.55
0.55
0.54
0.51
0.49
0.46
0.44
0.42
0.41
0.39
0.38
0.38
0.37
0.36
0.35
0.34
0.33

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 40

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
BB9-T1-06
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
18-07-'09
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.80
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.037 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.805
10.858
10.913
10.970
11.028
11.083
11.142
11.201
11.258
11.319
11.376
11.440
11.502
11.564
11.627
11.690
11.755
11.820
11.885
11.952
12.018
12.086
12.151
12.224
12.294
12.364
12.436
12.511
12.585
12.660
12.735
12.811
12.889
12.967
13.046
13.125
13.206

1.00
1.42
1.74
1.95
2.13
2.29
2.39
2.51
2.61
2.68
2.75
2.78
2.82
2.85
2.86
2.85
2.83
2.83
2.82
2.84
2.82
2.84
2.82
2.83
2.80
2.78
2.76
2.77
2.75
2.72
2.72
2.68
2.59
2.55
2.52
2.47
2.43

1.95
1.90
1.85
1.83
1.79
1.78
1.77
1.77
1.78
1.79
1.81
1.81
1.81
1.81
1.82
1.81
1.80
1.79
1.78
1.78
1.78
1.76
1.75
1.75
1.74
1.73
1.70
1.70
1.69
1.66
1.65
1.62
1.64
1.62
1.60
1.58
1.56

kG/cm

t'= ('1-'3)/2

1.95
1.57
1.35
1.24
1.14
1.08
1.05
1.01
0.99
0.97
0.96
0.96
0.95
0.94
0.94
0.94
0.94
0.93
0.94
0.93
0.93
0.92
0.92
0.91
0.91
0.91
0.91
0.90
0.90
0.89
0.89
0.88
0.91
0.91
0.91
0.91
0.91

1.95
2.23
2.35
2.42
2.44
2.48
2.50
2.54
2.58
2.61
2.65
2.66
2.68
2.68
2.69
2.68
2.66
2.64
2.63
2.63
2.63
2.60
2.59
2.58
2.56
2.54
2.50
2.50
2.47
2.43
2.42
2.37
2.37
2.32
2.29
2.25
2.20

kG/cm

0.000
0.659
1.002
1.181
1.297
1.397
1.457
1.529
1.592
1.635
1.687
1.700
1.726
1.739
1.754
1.742
1.718
1.709
1.699
1.704
1.697
1.687
1.669
1.668
1.650
1.627
1.597
1.601
1.571
1.536
1.527
1.484
1.456
1.409
1.380
1.338
1.297

s'= ('1+'3)/2

'3
kPa

0.00
0.38
0.60
0.70
0.80
0.86
0.90
0.94
0.96
0.97
0.98
0.99
0.99
1.00
1.00
1.01
1.01
1.01
1.01
1.02
1.02
1.03
1.03
1.03
1.03
1.03
1.04
1.04
1.05
1.05
1.06
1.06
1.03
1.03
1.04
1.04
1.04

T.din hiu chnh


2
Corr. A cm

2.05
2.43
2.65
2.76
2.86
2.92
2.95
2.99
3.01
3.03
3.04
3.04
3.05
3.06
3.06
3.06
3.06
3.07
3.06
3.07
3.07
3.08
3.08
3.09
3.09
3.09
3.09
3.10
3.10
3.11
3.11
3.12
3.09
3.09
3.09
3.09
3.09

'1
kPa

0.00
7.16
10.94
12.95
14.30
15.48
16.24
17.12
17.92
18.51
19.19
19.44
19.86
20.11
20.39
20.37
20.20
20.20
20.20
20.37
20.39
20.39
20.28
20.39
20.28
20.11
19.86
20.03
19.77
19.44
19.44
19.02
18.76
18.26
18.01
17.56
17.12

4.00

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.65
0.71
0.74
0.76
0.77
0.78
0.78
0.79
0.80
0.80
0.81
0.81
0.81
0.81
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.82
0.81
0.81
0.81
0.81
0.81
0.81
0.81
0.80
0.80
0.80
0.79
0.79

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.49
0.99
1.51
2.02
2.51
3.03
3.53
4.02
4.54
5.02
5.55
6.06
6.56
7.07
7.57
8.08
8.58
9.09
9.60
10.09
10.60
11.08
11.61
12.11
12.61
13.12
13.64
14.14
14.65
15.16
15.66
16.17
16.67
17.18
17.68
18.18

cm

p lc NLR
Pore Pressure
2
kG/cm

1.381
1.513
1.646
1.786
1.925
2.056
2.195
2.332
2.464
2.604
2.733
2.876
3.012
3.147
3.283
3.418
3.557
3.691
3.827
3.964
4.097
4.233
4.363
4.505
4.640
4.775
4.911
5.052
5.188
5.324
5.460
5.596
5.732
5.869
6.005
6.139
6.275

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.42

'1/'3

C.cao mu - Specimen height

-2.757
-1.215
1.95
2.05

0.00
0.33
0.50
0.59
0.65
0.70
0.73
0.76
0.80
0.82
0.84
0.85
0.86
0.87
0.88
0.87
0.86
0.85
0.85
0.85
0.85
0.84
0.83
0.83
0.82
0.81
0.80
0.80
0.79
0.77
0.76
0.74
0.73
0.70
0.69
0.67
0.65

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 41

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
BB9-T1-06
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
00-01-'00
H s cm bin lc - Loadcell Factor, kN/mV
cm2
Tit din - Area
10.60
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.028 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

10.602
10.655
10.709
10.763
10.818
10.874
10.928
10.987
11.044
11.102
11.160
11.218
11.277
11.339
11.400
11.460
11.520
11.586
11.649
11.714
11.780
11.845
11.912
11.979
12.048
12.113
12.186
12.256
12.328
12.400
12.472
12.546
12.621
12.697
12.773
12.851
12.929
13.009
13.088
13.170

1.00
1.37
1.78
1.99
2.16
2.26
2.35
2.44
2.51
2.57
2.60
2.64
2.70
2.74
2.77
2.81
2.82
2.82
2.81
2.83
2.81
2.80
2.77
2.75
2.76
2.74
2.74
2.80
2.76
2.76
2.74
2.75
2.71
2.71
2.68
2.62
2.54
2.45
2.38
2.23

2.92
2.54
2.66
2.65
2.64
2.60
2.57
2.57
2.57
2.55
2.54
2.54
2.50
2.47
2.44
2.43
2.41
2.40
2.37
2.36
2.34
2.32
2.30
2.31
2.29
2.26
2.26
2.20
2.19
2.17
2.15
2.14
2.12
2.10
2.08
2.05
2.04
1.99
1.95
1.89

kG/cm

t'= ('1-'3)/2

2.92
2.14
1.91
1.77
1.67
1.59
1.54
1.50
1.47
1.43
1.41
1.39
1.35
1.32
1.29
1.27
1.26
1.25
1.24
1.23
1.23
1.22
1.22
1.23
1.22
1.21
1.21
1.16
1.16
1.16
1.15
1.14
1.14
1.13
1.13
1.14
1.16
1.16
1.15
1.17

2.92
2.94
3.41
3.53
3.62
3.60
3.61
3.65
3.68
3.68
3.67
3.68
3.64
3.61
3.59
3.58
3.55
3.54
3.49
3.48
3.45
3.42
3.38
3.39
3.36
3.32
3.32
3.25
3.21
3.19
3.15
3.13
3.09
3.07
3.03
2.97
2.93
2.83
2.74
2.61

kG/cm

0.000
0.798
1.500
1.757
1.946
2.009
2.076
2.154
2.210
2.246
2.258
2.283
2.294
2.294
2.293
2.310
2.292
2.284
2.250
2.254
2.219
2.196
2.161
2.154
2.141
2.108
2.106
2.089
2.049
2.033
2.004
1.992
1.948
1.936
1.899
1.839
1.778
1.672
1.588
1.436

s'= ('1+'3)/2

'3
kPa

0.00
0.78
1.01
1.15
1.25
1.33
1.39
1.43
1.45
1.49
1.51
1.53
1.57
1.60
1.63
1.65
1.66
1.67
1.68
1.69
1.69
1.70
1.70
1.69
1.70
1.71
1.71
1.76
1.76
1.77
1.77
1.78
1.78
1.79
1.79
1.79
1.77
1.77
1.77
1.75

T.din hiu chnh


2
Corr. A cm

2.58
3.36
3.59
3.73
3.83
3.91
3.96
4.00
4.03
4.07
4.09
4.11
4.15
4.18
4.21
4.23
4.24
4.25
4.26
4.27
4.27
4.28
4.28
4.27
4.28
4.29
4.29
4.34
4.34
4.34
4.35
4.36
4.36
4.37
4.37
4.36
4.34
4.34
4.35
4.33

'1
kPa

0.00
8.51
16.07
18.91
21.05
21.85
22.69
23.66
24.40
24.94
25.20
25.60
25.87
26.01
26.14
26.47
26.41
26.47
26.21
26.41
26.14
26.01
25.74
25.80
25.80
25.53
25.67
25.60
25.26
25.20
25.00
25.00
24.58
24.58
24.26
23.64
22.99
21.75
20.78
18.91

5.50

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.59
0.66
0.72
0.75
0.76
0.77
0.78
0.79
0.79
0.80
0.80
0.80
0.80
0.81
0.81
0.81
0.81
0.81
0.81
0.81
0.81
0.81
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.79
0.79
0.79
0.79
0.78
0.77
0.76
0.75

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.50
1.00
1.49
1.99
2.50
2.98
3.50
4.00
4.50
5.00
5.49
5.99
6.50
7.00
7.48
7.96
8.49
8.99
9.49
10.00
10.49
11.00
11.49
12.00
12.47
13.00
13.50
14.00
14.50
14.99
15.50
16.00
16.50
16.99
17.50
18.00
18.50
18.99
19.50

cm

p lc NLR
Pore Pressure
2
kG/cm

1.185
1.317
1.452
1.584
1.717
1.852
1.981
2.119
2.252
2.385
2.518
2.649
2.782
2.918
3.052
3.181
3.310
3.450
3.583
3.718
3.853
3.984
4.119
4.250
4.386
4.512
4.651
4.785
4.919
5.053
5.185
5.318
5.452
5.586
5.718
5.852
5.986
6.119
6.251
6.385

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.35

'1/'3

C.cao mu - Specimen height

-2.757
-1.215
2.92
2.58

0.00
0.40
0.75
0.88
0.97
1.00
1.04
1.08
1.10
1.12
1.13
1.14
1.15
1.15
1.15
1.15
1.15
1.14
1.13
1.13
1.11
1.10
1.08
1.08
1.07
1.05
1.05
1.04
1.02
1.02
1.00
1.00
0.97
0.97
0.95
0.92
0.89
0.84
0.79
0.72

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 42

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu LK - Boring No.

BB9-T

S th nghim - Procedure

CIU

S hiu mu - Sample No.

BB9-T1-06

Chiu cao mu - Initial height, cm

7.46;7.42

su - Depth, m

11.3-12.10

ng knh mu - Diameter, cm

3.73;3.71

Deviator stress, q, kg/cm

2.50
2.00
1.50
1.00
First Trial

0.50

Second Trial
Third Trial

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

2.00

u, kG/cm2

1.60

1.20

First Trial

0.80

Second Trial
Third Trial

0.40

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Bien dang - Strain, %

4.0

First Trial

t'

3.0

Second Trial
Kf-line

2.0

Third Trial

1.0

0.0
0.0

1.0

2.0

3.0

4.0

s'

5.0

6.0

7.0

8.0

Ph lc - Appendix 6.4
T - Sheet 43

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

TH NGHIM BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project : KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No.

B12 - T1

S hiu LK - Boring No.

S th nghim - Procedure

B12

su - Depth, m
Ngi TN - Tested by

5.00 - 5.80
Thinh

Ngy TN - Tested Date


Ban u
m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3
Initial

After test
Giai on bo ha
Saturated Stage

Giai on c kt

76.0

ng knh mu - Diameter, mm

38.0

Mu th 1-Trial 1st Mu th 2-Trial 2nd Mu th 3-Trial 3rd


09-12-08
10-12-'08
22.3
20.3

Mu th - Specimen

Sau th nghim

2.02
1.65

1.71

m - Moisture Content, %
Dung trng t - Wet Density, g/cm 3

23.6

22.1

2.14

2.54

Dung trng kh - Dry Density, g/cm 3

1.73

2.08

0.00

0.00

3.93

2.75

p lc NLR - P.W.P, kG/cm 2


p lc NLR b.ha - Saturated P.W.P, kG/cm

p lc nguc - Back pressure, kG/cm 2

4.00

3.0

Gi tr B - B Value
p lc bung - Cell pressure, kG/cm 2

0.95

0.95
7.0
3.00

5.67

6.69

3.94

2.75

p lc bung - Cell pressure, kG/cm 2

6.00

7.00

3.95

2.76

2.05

4.24

0.495

0.274

5.0

5.5

p lc ban u - Initial 3, kG/cm2


Tc bin dng - Rate of Strain, mm/min
Failure Conditions

6.0
4.00

p lc NLR kt thc - Final P.W.P, kG/cm 2


2
Compression Stage p lc NLR ban u - Initial P.W.P, kG/cm

Trng thi ph hu

2.06

Dung trng kh - Dry Density, g/cm 3

2
Consolidation Stage p lc nguc - Back pressure, kG/cm
p lc NLR ban u - Initial P.W.P, kG/cm 2

Giai on nn

CU

Chiu cao mu - Initial Height, mm

Bin dng - Strain, %


lch ng sut - Deviator stress, kPa

3.057

6.128

'3f, kG/cm2

0.925
3.982

2.480
8.607

1.130

1.763

'1f, kG/cm2
Gia tng p lc NLR - Excess P.W.P, kG/cm 2
2

Cc thng s c kt Hs c kt - Coef. Of Consolidation C V, cm /s

6.65E-04

3.86E-04

Consolidation

Hs nn th tch - Coef. of Compr. m v, cm2/kG

2.79E-02

4.69E-02

Parameters

Hs thm - Coef. of Permeability k, cm/s


Gc ma st trong - Internal Friction Angle

1.82E-08

1.78E-08

Sc khng ct

2421

'

2947

Shear Strength

Lc dnh - Cohesion c, kG/cm 2

0.056

c'

0.357

ng suat cat - Shear Stress, kG/cm

9.0

6.0

3.0

0.0
0.0

3.0

6.0

9.0

12.0

Cac ng suat chnh - Principal Stresses, kG/cm 2

15.0

18.0

Ph lc - Appendix 6.4
T - Sheet 44

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

KT QU TH NGHIM NN BA TRC -TRIAXIAL COMPRESSION TEST RESULT (CIU method)

Mu - Specimen

B12 - T1

su - Depth, m

Mu th 1 - First Trial

Ngy TN - Tested Date


Chiu di - Length,cm

5.00 - 5.80

Mu th 2 - Second Trial

09-12-'08
7.60

7.48

7.60

7.13

11.34

10.98

11.34

9.94

Th tch - Volume, cm3

86.19

82.07

86.19

70.89

14.2

22.68

24.5

39.01

Tf, min

Vf, mm/min

Thi gian
Time t,
min
0
0.17
0.5
1
2
5
10
15
30
60
90
120
180
240
360
480
720

2.00
Th tch, cm3

t, min
0.00
0.41
0.71
1.00
1.41
2.24
3.16
3.87
5.48
7.75
9.49
10.95
13.42
15.49
18.97
21.91
26.83

AL NLR

AL NLR

10

15

20

25

30

35

2
4
6

4.00
Th tch, cm3

0.274

0.495

'3 Eff. Pressure, ksc

10-12-'08

Tit din - Area, cm2


T 100, min

SQRT(T)

Mu th 3 - Third Trial

Vol.Ch.

S hiu LK - Boring No

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH - THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

Th tch

AL NLR

8
10
12
14

Th tch

16

AL NLR

Volume
Volume
Volume
Volume
18
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
PWP, kg/cm 2
change, cm3
change, cm3
change, cm3
change, cm3
0.00
5.67
0.00
6.69
0.01
5.66
1.04
6.69
0.03
5.64
4.42
6.69
0.54
5.59
5.46
6.67
7.0
1.03
5.53
6.81
6.65
2.07
5.33
9.04
6.56
6.0
2.87
5.05
10.97
6.36
5.0
3.21
4.81
12.06
6.18
3.72
4.39
13.56
5.57
4.0
4.04
4.09
14.82
4.44
4.12
4.00
15.39
3.63
3.0
4.15
3.97
15.59
3.21
2.0
4.17
3.94
15.86
2.89
4.17
3.94
15.92
2.80
1.0
4.14
3.94
15.95
2.77
0.1
4.12
3.94
15.94
2.77
15.93
2.75

P.W.P

Cng trnh - Project

10

100

Log (t)
A

1000

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 45

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B12 - T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
09-12-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
p lc c hiu - Initial Effective stress
Tit din - Area
10.98
Tc ct - Rate
0.495 mm/min.
p lc nc l rng - Initial Pore Pressure

0.000
0.399
0.867
1.353
1.821
2.312
2.798
3.273
3.759
4.246
4.748
5.253
5.739
6.235
6.714
7.219
7.715
8.185
8.669
9.162
9.665
10.144
10.647
11.156
11.642
12.131
12.613
13.108
13.579
14.060
14.563

0.00
0.53
1.16
1.81
2.44
3.09
3.74
4.38
5.03
5.68
6.35
7.03
7.68
8.34
8.98
9.65
10.32
10.95
11.59
12.25
12.93
13.57
14.24
14.92
15.57
16.22
16.87
17.53
18.16
18.80
19.48

cm

p lc bung - Cell pressure

0.10
0.24
0.31
0.36
0.40
0.42
0.44
0.45
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.46
0.47
0.47
0.47
0.47
0.48
0.48
0.49
0.49
0.49
0.50
0.50
0.50
0.50
0.51
0.51

0.00
13.85
21.01
26.02
30.08
32.23
33.90
34.85
35.33
35.33
35.57
35.33
35.33
35.33
35.81
36.05
36.29
36.52
36.76
37.00
37.72
37.96
38.43
38.91
39.15
39.39
39.63
39.87
40.11
40.58
40.82

6.00

3.95
4.55
4.89
5.09
5.20
5.24
5.22
5.15
5.08
5.01
4.94
4.89
4.83
4.78
4.74
4.72
4.70
4.68
4.65
4.64
4.62
4.60
4.59
4.57
4.55
4.54
4.52
4.51
4.50
4.50
4.48

0.00
0.61
0.95
1.14
1.26
1.29
1.27
1.21
1.13
1.07
1.00
0.94
0.88
0.83
0.80
0.77
0.75
0.73
0.71
0.69
0.68
0.66
0.64
0.63
0.61
0.60
0.57
0.56
0.55
0.55
0.53

10.975
11.034
11.104
11.177
11.249
11.325
11.402
11.478
11.556
11.636
11.719
11.804
11.888
11.974
12.058
12.148
12.238
12.324
12.414
12.508
12.604
12.698
12.797
12.900
12.999
13.101
13.202
13.308
13.410
13.517
13.630

0.000
1.255
1.892
2.328
2.674
2.846
2.973
3.037
3.057
3.036
3.035
2.993
2.972
2.951
2.970
2.967
2.965
2.964
2.961
2.958
2.992
2.989
3.003
3.016
3.012
3.007
3.002
2.996
2.991
3.002
2.995

2.05
2.70
3.00
3.24
3.47
3.61
3.76
3.88
3.98
4.02
4.09
4.11
4.14
4.17
4.23
4.25
4.27
4.29
4.31
4.32
4.37
4.39
4.42
4.44
4.46
4.46
4.48
4.49
4.49
4.51
4.52

2.05
1.45
1.11
0.91
0.80
0.76
0.78
0.85
0.92
0.99
1.06
1.11
1.17
1.22
1.26
1.28
1.30
1.32
1.35
1.36
1.38
1.40
1.41
1.43
1.45
1.46
1.48
1.49
1.50
1.50
1.52

1.00
1.87
2.71
3.56
4.35
4.73
4.80
4.59
4.31
4.08
3.87
3.69
3.54
3.41
3.36
3.31
3.28
3.24
3.20
3.17
3.17
3.14
3.13
3.11
3.08
3.06
3.03
3.01
2.99
3.00
2.97

2.05
2.08
2.05
2.07
2.13
2.19
2.27
2.36
2.45
2.51
2.57
2.61
2.66
2.70
2.74
2.77
2.78
2.81
2.83
2.84
2.87
2.89
2.91
2.94
2.95
2.96
2.98
2.99
2.99
3.00
3.02

kG/cm

t'= ('1-'3)/2

kG/cm

s'= ('1+'3)/2

'1/'3

'3
kPa

lch ng sut
Deviator stress,
2
kG/cm

T.din hiu chnh


2
Corr. A cm

p lc NLR d
Excess Pore
2
Pressure kG/cm

ng sut c hiu
Effective stresses
p lc NLR
Pore Pressure
2
kG/cm

Ti trng
Axial Load, kG

Ti
Load
S c lc
Load Reading mV

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.48

'1
kPa

C.cao mu - Specimen height

1
-100.000
2.05
3.95

0.00
0.63
0.95
1.16
1.34
1.42
1.49
1.52
1.53
1.52
1.52
1.50
1.49
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.50
1.49
1.50
1.51
1.51
1.50
1.50
1.50
1.50
1.50
1.50

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation


Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

Ph lc - Appendix 6.4
T - Sheet 46

KT QU TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.
B12 - T1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
10-12-'08
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Area
9.94
p lc c hiu - Initial Effective stress
Tc ct - Rate
0.274 mm/min.
p lc nc l rng - Initial Pore Pressure
p lc bung - Cell pressure

9.942
9.991
10.054
10.117
10.182
10.248
10.314
10.379
10.448
10.519
10.591
10.665
10.738
10.814
10.892
10.968
11.048
11.125
11.205
11.284
11.368
11.452
11.540
11.627
11.717
11.808
11.898
11.992
12.081
12.174
12.271
12.368

1.00
1.62
2.19
2.72
3.13
3.40
3.52
3.56
3.54
3.47
3.40
3.33
3.26
3.20
3.13
3.08
3.03
2.98
2.92
2.88
2.84
2.80
2.75
2.73
2.70
2.67
2.66
2.64
2.62
2.61
2.59
2.59

4.24
4.92
5.06
5.11
5.16
5.23
5.32
5.39
5.48
5.54
5.60
5.66
5.72
5.76
5.80
5.83
5.86
5.89
5.91
5.93
5.94
5.95
5.93
5.96
5.97
5.97
5.98
5.99
6.00
6.01
6.01
6.02

kG/cm

t'= ('1-'3)/2

4.24
3.76
3.17
2.75
2.50
2.38
2.35
2.37
2.42
2.48
2.55
2.61
2.68
2.74
2.80
2.86
2.91
2.97
3.02
3.06
3.10
3.13
3.16
3.20
3.23
3.25
3.27
3.30
3.31
3.33
3.34
3.36

4.24
6.08
6.95
7.47
7.82
8.08
8.28
8.42
8.54
8.61
8.65
8.70
8.75
8.77
8.79
8.80
8.81
8.82
8.81
8.81
8.79
8.76
8.71
8.72
8.71
8.69
8.69
8.69
8.69
8.68
8.67
8.69

kG/cm

0.000
2.318
3.775
4.719
5.322
5.707
5.925
6.049
6.123
6.128
6.108
6.088
6.069
6.026
5.983
5.942
5.899
5.858
5.795
5.754
5.691
5.628
5.544
5.523
5.480
5.438
5.417
5.395
5.375
5.353
5.331
5.327

s'= ('1+'3)/2

'3
kPa

0.00
0.48
1.07
1.50
1.75
1.87
1.89
1.88
1.83
1.76
1.70
1.63
1.56
1.50
1.44
1.38
1.33
1.28
1.23
1.19
1.14
1.11
1.08
1.04
1.02
0.99
0.97
0.95
0.93
0.91
0.90
0.88

T.din hiu chnh


2
Corr. A cm

2.76
3.24
3.83
4.25
4.50
4.62
4.65
4.63
4.58
4.52
4.45
4.39
4.32
4.26
4.20
4.14
4.09
4.03
3.98
3.94
3.90
3.87
3.84
3.80
3.77
3.75
3.73
3.70
3.69
3.67
3.66
3.64

'1
kPa

0.00
23.16
37.96
47.74
54.19
58.49
61.11
62.78
63.98
64.45
64.69
64.93
65.17
65.17
65.17
65.17
65.17
65.17
64.93
64.93
64.69
64.45
63.98
64.22
64.22
64.22
64.45
64.69
64.93
65.17
65.41
65.89

7.00

ng sut c hiu
Effective stresses
lch ng sut
Deviator stress,
2
kG/cm

0.11
0.35
0.49
0.59
0.66
0.70
0.73
0.74
0.75
0.76
0.76
0.76
0.77
0.77
0.77
0.77
0.77
0.77
0.76
0.76
0.76
0.76
0.75
0.76
0.76
0.76
0.76
0.76
0.76
0.77
0.77
0.77

Ti trng
Axial Load, kG

S c lc
Load Reading mV

Ti
Load
p lc NLR d
Excess Pore
2
Pressure kG/cm

0.00
0.49
1.12
1.74
2.36
2.99
3.61
4.21
4.85
5.49
6.13
6.78
7.41
8.07
8.73
9.36
10.02
10.64
11.28
11.90
12.55
13.19
13.85
14.50
15.15
15.80
16.45
17.10
17.71
18.34
18.98
19.62

cm

p lc NLR
Pore Pressure
2
kG/cm

0.000
0.350
0.795
1.238
1.683
2.132
2.572
3.006
3.457
3.912
4.375
4.838
5.288
5.756
6.223
6.673
7.143
7.586
8.042
8.485
8.948
9.404
9.877
10.338
10.806
11.269
11.728
12.193
12.629
13.076
13.535
13.989

B.dng tng i
Strain,%

S c Ch.v
Disp Reading v

Bin dng
Axial strain

7.13

'1/'3

C.cao mu - Specimen height

1
-100.0000
4.24
2.76

0.00
1.16
1.89
2.36
2.66
2.85
2.96
3.02
3.06
3.06
3.05
3.04
3.03
3.01
2.99
2.97
2.95
2.93
2.90
2.88
2.85
2.81
2.77
2.76
2.74
2.72
2.71
2.70
2.69
2.68
2.67
2.66

Cng ty C phn T vn Thit k Cng - K thut bin - PortCoast Consultant Corporation Ph lc - Appendix 6.4
Phng a K thut - Kim nh Cng trnh - Geotechnical and Quality Testing Department

T - Sheet 47

TH NGHIM NN BA TRC - TRIAXIAL COMPRESSION TEST


Cng trnh - Proj KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu LK - Boring No.

B12

S hiu mu - Sample No.

S th nghim - Procedure

B12 - T1

su - Depth, m

5.00 - 5.80

CIU

Chiu cao mu - Initial height, cm

7.48;7.13

ng knh mu - Diameter, cm

3.74;3.56

7.00

Deviator stress, q, kg/cm

6.00
5.00
4.00
3.00
First Trial

2.00

Second Trial

1.00
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

2.00
1.75

First Trial

u, kG/cm2

1.50

Second Trial

1.25
1.00
0.75
0.50
0.25
0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

Bien dang - Strain, %

9.00
First Trial
Second Trial

6.00

Kf-line
3.00

0.00
0.0

3.0

6.0

9.0

s'

12.0

15.0

18.0

APPENDIX 6.5: UNCONSOLIDATED UNDRAINED TRIXIAL


COMPRESSION TEST (UU) RESULTS
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation

Appendix 6.5 -1/4

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM NEN BA TRUC - TRIAXIAL COMPRESSION TEST


Khu Lin Hp Gang Thp & Cng Sn Dng Formosa H Tnh
The Intergrated Steel Mill & Son Duong Port Formosa Ha Tinh

Cong trnh - Project

So hieu mau - Sample No. A1


So hieu LK - Boring No. A1

- T1

o sau - Depth, m
Ngay TN - Tested Date

8.5 - 9.3
11-10-2008

Ngi TN - Test by

Khanh

S o th nghiem - Procedure
Chieu cao mau - Initial Height, mm

UU
76.0

ng knh mau - Diameter, mm


Toc o BD - Rate of Strain, mm/min.
3
Th tch mu - Volume, cm

38.0
0.76

Trc TN - Initial Test


Mau th - Trial No.
Dung trong t - Wet Density, g/cm
o am - Moisture Content, %

Dung trong kho - Dry Density, g/cm

Ap lc buong - Cell Pressure, kG/cm


Pha huy tai - Failure at % Strain

o lech ng suat - Deviator stress, kg/cm

86.19

Sau TN - After Test

1.78
39.4

1.75
55.1

1.76
35.3

1.78
45.1

1.74
45.4

1.76
47.0

1.28

1.13

1.30

1.23

1.20

1.20

0.50

1.00

2.00

0.50
15.02

1.00
2.89

2.00
14.60

0.644

0.646

0.647

Goc ma sat trong-Angle of Internal Friction

Lc dnh - Cohesion, kG/cm cuu


2

003

0.321

Deviator stress, q, kG/cm2

0.70
0.60
0.50
0.40
0.30
First Trial

0.20

Second Trial

0.10

Third Trial

0.00
0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

16.0

18.0

20.0

22.0

24.0

Strain, %

Shear Stress, kG/cm2

1.50

1.13

0.75

0.38

0.00
0.00

0.38

0.75

1.13

1.50

1.88

Principal Stresses, kG/cm2

2.25

2.63

3.00

Appendix 6.5-2/4

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM NEN BA TRUC - TRIAXIAL SHEARING


Cong trnh - Project

Khu Lin Hp Gang Thp & Cng Sn Dng Formosa H Tnh


The Intergrated Steel Mill & Son Duong Port Formosa Ha Tinh

So hieu mau - Sample No.

A1 - T1

S o th nghiem - Procedure

So hieu LK - Boring No.

A1

Tiet dien - Area: cm2

o sau - Depth, m

8.5 - 9.3

Chieu cao mau - Specimen height, mm

76.0

Ngay TN - Tested Date

10/11/2008

Ap lc buong - Cell Pressure, kG/cm2

0.50
86.19

Toc o cat - Rate, mm/min

0.76

0.00
0.44
0.70
0.99
1.28
1.57
1.87
2.17
2.45
2.71
2.97
3.22
3.47
3.73
4.01
4.28
4.55
4.83
5.11
5.42
5.72
6.01
6.29
6.80
7.32
7.87
8.40
8.99
9.56
10.12
10.63
11.18
11.72
12.27
12.84
13.41
13.96
14.49
15.02
15.56
16.12
16.69
17.44

0.01
0.04
0.05
0.06
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10

0.500
0.710
0.834
0.917
0.978
1.039
1.078
1.097
1.116
1.135
1.133
1.132
1.130
1.108
1.126
1.104
1.103
1.081
1.079
1.077
1.095
1.094
1.111
1.108
1.105
1.101
1.117
1.132
1.128
1.124
1.140
1.136
1.132
1.128
1.124
1.138
1.116
1.130
1.144
1.140
1.136
1.131
1.126

1.000
1.419
1.669
1.834
1.956
2.077
2.157
2.194
2.232
2.270
2.266
2.263
2.260
2.216
2.253
2.209
2.205
2.162
2.158
2.155
2.191
2.187
2.223
2.216
2.210
2.202
2.234
2.264
2.256
2.249
2.279
2.271
2.264
2.256
2.247
2.276
2.232
2.260
2.288
2.280
2.271
2.263
2.251

0.500
0.605
0.667
0.708
0.739
0.769
0.789
0.799
0.808
0.817
0.817
0.816
0.815
0.804
0.813
0.802
0.801
0.790
0.790
0.789
0.798
0.797
0.806
0.804
0.802
0.801
0.809
0.816
0.814
0.812
0.820
0.818
0.816
0.814
0.812
0.819
0.808
0.815
0.822
0.820
0.818
0.816
0.813

kG/cm

(1-3)/2

kG/cm

(1+3)/2

1/3

Kg/cm

Ti trng
Axial Load, kG
0.00
2.39
3.82
4.77
5.49
6.21
6.68
6.92
7.16
7.40
7.40
7.40
7.40
7.16
7.40
7.16
7.16
6.92
6.92
6.92
7.16
7.16
7.40
7.40
7.40
7.40
7.64
7.88
7.88
7.88
8.12
8.12
8.12
8.12
8.12
8.36
8.12
8.36
8.59
8.59
8.59
8.59
8.59

0.000
0.105
0.167
0.208
0.239
0.269
0.289
0.299
0.308
0.317
0.317
0.316
0.315
0.304
0.313
0.302
0.301
0.290
0.290
0.289
0.298
0.297
0.306
0.304
0.302
0.301
0.309
0.316
0.314
0.312
0.320
0.318
0.316
0.314
0.312
0.319
0.308
0.315
0.322
0.320
0.318
0.316
0.313

0.000
0.210
0.334
0.417
0.478
0.539
0.578
0.597
0.616
0.635
0.633
0.632
0.630
0.608
0.626
0.604
0.603
0.581
0.579
0.577
0.595
0.594
0.611
0.608
0.605
0.601
0.617
0.632
0.628
0.624
0.640
0.636
0.632
0.628
0.624
0.638
0.616
0.630
0.644
0.640
0.636
0.631
0.626

T.din hiu chnh


2
Corr. A cm

The tch mau - Volume, cm

lch ng sut
Deviator stress,
2
kG/cm

Mau th 1 - First Trial


S c
Reading, KN

B.dng tng i
Strain,%

S c
Reading, mm
0.00
0.33
0.53
0.75
0.97
1.20
1.42
1.65
1.86
2.06
2.25
2.44
2.64
2.84
3.05
3.25
3.46
3.67
3.89
4.12
4.34
4.57
4.78
5.17
5.56
5.98
6.38
6.83
7.27
7.69
8.08
8.50
8.91
9.32
9.76
10.19
10.61
11.01
11.41
11.83
12.25
12.68
13.25

-100.000

H.s c. bin ch.v - Disp.Trans.Factor, mm/V


H.s c. bin lc - Loadcell.Factor, kG/mmV

UU
11.34

11.341
11.391
11.421
11.454
11.488
11.522
11.557
11.593
11.626
11.658
11.688
11.718
11.749
11.781
11.815
11.848
11.882
11.916
11.952
11.991
12.029
12.066
12.102
12.169
12.237
12.310
12.381
12.461
12.540
12.618
12.691
12.769
12.847
12.927
13.012
13.097
13.181
13.262
13.346
13.431
13.521
13.613
13.737

Appendix 6.5-3/4

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM NEN BA TRUC - TRIAXIAL SHEARING


Cong trnh - Project

Khu Lin Hp Gang Thp & Cng Sn Dng Formosa H Tnh


The Intergrated Steel Mill & Son Duong Port Formosa Ha Tinh

So hieu mau - Sample No.

A1 - T1

S o th nghiem - Procedure

So hieu LK - Boring No.

A1

Tiet dien - Area: cm2

o sau - Depth, m

8.5 - 9.3

Chieu cao mau - Specimen height, mm

76.0

Ngay TN - Tested Date

10/11/2008

Ap lc buong - Cell Pressure, kG/cm2

1.00

The tch mau - Volume, cm

86.19

-100.000

Toc o cat - Rate, mm/min

0.76

H.s c. bin ch.v - Disp.Trans.Factor, mm/V


H.s c. bin lc - Loadcell.Factor, kG/mmV

UU
11.34

0.00
0.35
0.57
0.81
1.03
1.25
1.45
1.63
1.82
2.00
2.20
2.41
2.60
2.81
3.03
3.24
3.48
3.71
3.94
4.14
4.34
4.53
4.71
4.92
5.12
5.33
5.53
5.74
5.95
6.17
6.41
6.64
6.85
7.25
7.64
8.06
8.46
8.89
9.34
9.76
10.17
10.70

0.00
0.46
0.75
1.06
1.36
1.64
1.91
2.15
2.40
2.63
2.89
3.17
3.42
3.69
3.98
4.27
4.58
4.88
5.18
5.45
5.72
5.96
6.20
6.47
6.74
7.01
7.27
7.55
7.83
8.12
8.44
8.73
9.02
9.54
10.06
10.60
11.13
11.69
12.29
12.84
13.38
14.08

0.01
0.04
0.05
0.06
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.10

0.00
2.36
3.80
4.65
5.19
5.83
6.47
6.78
7.02
7.25
7.55
7.56
7.48
7.60
7.52
7.51
7.43
7.42
7.10
7.26
7.02
7.23
7.25
7.30
7.36
7.38
7.52
7.55
7.69
7.48
7.63
7.53
7.80
7.96
8.04
8.09
8.23
8.14
8.30
8.26
8.30
8.26

1.000
1.207
1.332
1.406
1.452
1.506
1.560
1.585
1.604
1.622
1.646
1.645
1.637
1.646
1.637
1.634
1.625
1.623
1.593
1.605
1.584
1.599
1.599
1.602
1.605
1.605
1.615
1.616
1.625
1.606
1.616
1.606
1.626
1.635
1.637
1.638
1.645
1.634
1.642
1.635
1.634
1.626

1.000
1.207
1.332
1.406
1.452
1.506
1.560
1.585
1.604
1.622
1.646
1.645
1.637
1.646
1.637
1.634
1.625
1.623
1.593
1.605
1.584
1.599
1.599
1.602
1.605
1.605
1.615
1.616
1.625
1.606
1.616
1.606
1.626
1.635
1.637
1.638
1.645
1.634
1.642
1.635
1.634
1.626

1.000
1.103
1.166
1.203
1.226
1.253
1.280
1.292
1.302
1.311
1.323
1.323
1.318
1.323
1.318
1.317
1.312
1.311
1.297
1.303
1.292
1.300
1.300
1.301
1.303
1.303
1.307
1.308
1.312
1.303
1.308
1.303
1.313
1.318
1.319
1.319
1.323
1.317
1.321
1.317
1.317
1.313

0.000
0.103
0.166
0.203
0.226
0.253
0.280
0.292
0.302
0.311
0.323
0.323
0.318
0.323
0.318
0.317
0.312
0.311
0.297
0.303
0.292
0.300
0.300
0.301
0.303
0.303
0.307
0.308
0.312
0.303
0.308
0.303
0.313
0.318
0.319
0.319
0.323
0.317
0.321
0.317
0.317
0.313

0.000
0.207
0.332
0.406
0.452
0.506
0.560
0.585
0.604
0.622
0.646
0.645
0.637
0.646
0.637
0.634
0.625
0.623
0.593
0.605
0.584
0.599
0.599
0.602
0.605
0.605
0.615
0.616
0.625
0.606
0.616
0.606
0.626
0.635
0.637
0.638
0.645
0.634
0.642
0.635
0.634
0.626

T.din hiu chnh


2
Corr. A cm

lch ng sut
Deviator stress,
2
kG/cm

kG/cm

(1-3)/2

kG/cm

(1+3)/2

1/3

Kg/cm

Ti trng
Axial Load, kG

S c
Reading, KN

B.dng tng i
Strain,%

S c
Reading, mm

Mau th 2 - Second Trial

11.341
11.394
11.426
11.463
11.497
11.530
11.562
11.590
11.620
11.648
11.679
11.712
11.743
11.776
11.812
11.847
11.885
11.923
11.961
11.995
12.029
12.060
12.091
12.125
12.161
12.197
12.230
12.267
12.305
12.343
12.386
12.426
12.465
12.537
12.609
12.686
12.761
12.843
12.930
13.012
13.093
13.200

Appendix 6.5-4/4

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM NEN BA TRUC - TRIAXIAL SHEARING


Cong trnh - Project

Khu Lin Hp Gang Thp & Cng Sn Dng Formosa H Tnh


The Intergrated Steel Mill & Son Duong Port Formosa Ha Tinh

So hieu mau - Sample No.

A1 - T1

S o th nghiem - Procedure

So hieu LK - Boring No.

A1

Tiet dien - Area: cm2

o sau - Depth, m

8.5 - 9.3

Chieu cao mau - Specimen height, mm

76.0

Ngay TN - Tested Date

10/11/2008

Ap lc buong - Cell Pressure, kG/cm2

2.00

The tch mau - Volume, cm

86.19

-100.000

Toc o cat - Rate, mm/min

0.76

H.s c. bin ch.v - Disp.Trans.Factor, mm/V


H.s c. bin lc - Loadcell.Factor, kG/mmV

UU
11.34

0.00
0.42
0.64
0.86
1.07
1.29
1.52
1.74
1.94
2.13
2.33
2.52
2.73
2.94
3.14
3.35
3.56
3.77
4.00
4.22
4.44
4.65
4.85
5.24
5.66
6.06
6.48
6.92
7.35
7.76
8.16
8.58
9.00
9.41
9.86
10.27
10.68
11.10
11.52
11.92
12.27
12.84

0.00
0.56
0.84
1.13
1.41
1.70
2.00
2.29
2.55
2.81
3.07
3.32
3.59
3.87
4.13
4.41
4.68
4.96
5.26
5.56
5.85
6.12
6.39
6.89
7.45
7.97
8.53
9.10
9.67
10.22
10.74
11.29
11.84
12.39
12.97
13.52
14.05
14.60
15.15
15.68
16.15
16.89

0.04
0.06
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12

0.00
2.15
3.82
4.77
5.49
5.97
6.45
6.68
6.92
6.92
6.92
7.16
7.16
7.16
7.40
7.40
7.40
7.40
7.64
7.40
7.40
7.64
7.64
7.40
7.64
7.88
7.88
7.88
7.88
7.88
7.88
8.12
8.12
8.12
8.12
8.36
8.36
8.59
8.36
8.59
8.36
8.59

2.000
2.188
2.334
2.416
2.477
2.517
2.557
2.576
2.595
2.593
2.592
2.611
2.609
2.607
2.626
2.624
2.622
2.620
2.638
2.616
2.614
2.632
2.631
2.608
2.623
2.639
2.635
2.631
2.627
2.624
2.620
2.635
2.631
2.627
2.623
2.637
2.633
2.647
2.625
2.639
2.618
2.630

1.000
1.094
1.167
1.208
1.239
1.259
1.278
1.288
1.297
1.297
1.296
1.305
1.304
1.304
1.313
1.312
1.311
1.310
1.319
1.308
1.307
1.316
1.315
1.304
1.312
1.320
1.318
1.316
1.314
1.312
1.310
1.317
1.315
1.314
1.311
1.319
1.317
1.324
1.313
1.319
1.309
1.315

2.000
2.094
2.167
2.208
2.239
2.259
2.278
2.288
2.297
2.297
2.296
2.305
2.304
2.304
2.313
2.312
2.311
2.310
2.319
2.308
2.307
2.316
2.315
2.304
2.312
2.320
2.318
2.316
2.314
2.312
2.310
2.317
2.315
2.314
2.311
2.319
2.317
2.324
2.313
2.319
2.309
2.315

0.000
0.094
0.167
0.208
0.239
0.259
0.278
0.288
0.297
0.297
0.296
0.305
0.304
0.304
0.313
0.312
0.311
0.310
0.319
0.308
0.307
0.316
0.315
0.304
0.312
0.320
0.318
0.316
0.314
0.312
0.310
0.317
0.315
0.314
0.311
0.319
0.317
0.324
0.313
0.319
0.309
0.315

0.000
0.188
0.334
0.416
0.477
0.517
0.557
0.576
0.595
0.593
0.592
0.611
0.609
0.607
0.626
0.624
0.622
0.620
0.638
0.616
0.614
0.632
0.631
0.608
0.623
0.639
0.635
0.631
0.627
0.624
0.620
0.635
0.631
0.627
0.623
0.637
0.633
0.647
0.625
0.639
0.618
0.630

T.din hiu chnh


2
Corr. A cm

lch ng sut
Deviator stress,
2
kG/cm

kG/cm

(1-3)/2

kG/cm

(1+3)/2

1/3

Kg/cm

Ti trng
Axial Load, kG

S c
Reading, KN

B.dng tng i
Strain,%

S c
Reading, mm

Mau th 3 - Third Trial

11.341
11.405
11.437
11.471
11.504
11.538
11.573
11.607
11.638
11.669
11.700
11.730
11.763
11.797
11.829
11.864
11.898
11.933
11.971
12.008
12.046
12.080
12.115
12.181
12.254
12.324
12.399
12.477
12.555
12.632
12.706
12.785
12.864
12.944
13.031
13.114
13.195
13.280
13.367
13.451
13.525
13.646

APPENDIX 7: SUMMARY OF ROCK LABORATORY TESTING


RESULTS
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Ph lc - Appendix: 7.1
T - Sheet : 1

CNG TY C PHN T VN THIT K CNG - K THUT BIN


PORTCOAST CONSULTANT CORPORATION

KT QU TH NGHIM - ROCK TEST REPORT


KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Cng trnh - Project:

THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
Khch hng - Client:
CNG TY TNHH GANG THP HNG NGHIP FORMOSA H TNH - FORMOSA HATINH STEEL CORPORATION
Tn mu - Name of sample: Core rock sample
S lng mu - Quantity:
54
Ngy nhn mu - Date receied10/06/08
Phng php th - Test methoASTM - D2938
iu kin th - Test condition:
Dry state

Saturated State

TT - N

S hiu mu Sample No.

su Depth, m

Ngy th
nghim - Test
date

A1 - R1

22

15/10/08

1.14

2.66

2.63

2.09

2.64

A2 - R1

27.2-27.4

20/3/2009

1.69

2.47

2.43

3.24

A2 - R2

34.7

20/3/2009

0.20

2.63

2.62

0.71

A3 - R1

25.6-26.0

11/03/08

0.71

2.69

2.67

A4 - R1

34.2-34.5

07/11/09

0.86

2.59

A5 - R1

38.0-38.5

07/11/09

0.90

2.60

A7 - R1

27.0-27.5

11/11/08

1.40

A8 - R1

18.65

07/11/09

2.77

A8 - R2

23.3-23.5

07/11/09

10

A8 - R3

37.3-37.6

11

A10 - R1

23

12

A10 - R2

39.4

14/10/08

7.79

13

A15 - R1

26.6-27.0

20/3/2009

0.15

14

A16 - R1

25.7

20/3/2009

0.65

15

B1 - R1

47

11/06/08

6.83

16

B2 - R1

30

20/3/2009

17

B2 - R1

43.5

18

B3 - R1

24.3-24.6

19

B3 - R2

46.0-47.0

20

B4 - R1

15

21

B5 - R1

22

B7 - R1

23

B7 - R2

24

B7 - R3

m Moisture
Content, %

Dung trng t- Dung trng kh Wet Density


Dry density
(g/cm3)
(g/cm3)

m bo ha Dung trng bo
T trng Moisture
ha -Saturated Special Gravity
Content
density (G/cm3)
(G/cm3)
saturated, %

UC test result
bo
Sc khng nn ha Unconfined
Deg. of
compressive
Saturation strength Qu (MPa)

Sc khng nn Modun bin dng Saturated


Deformation
unconfined
Modulus Es50
compressive
(MPa)
strength Qu (MPa)

Modun bin dng


bo haSaturated
Deformation
Modulus Es50
(MPa)

RQD(%)

FI

Tn
lp Layer

1989.4

33

L2a

rng Porosity, %

H s rng
- Void ratio

2.74

5.43

0.057

100

2.51

2.63

7.86

0.085

100

2.64

2.67

1.87

0.019

100

28.8

0.95

2.69

2.73

2.54

0.026

100

9.8

2.57

1.71

2.62

2.69

4.40

0.046

100

2.58

1.44

2.62

2.68

3.73

0.039

100

10.3

2188.3

2.62

2.58

2.53

2.60

2.71

6.43

0.069

100

2.7

40.5

2.07

2.01

7.60

2.16

2.37

15.27

0.180

100

6b

1.20

2.14

2.12

5.95

2.23

2.41

12.54

0.143

100

6b

07/11/09

0.55

2.09

2.08

6.31

2.20

2.39

13.08

0.150

100

6b

14/10/08

1.40

2.42

2.38

2.79

2.53

2.64

6.87

0.074

100

2.22

2.06

10.94

2.28

2.65

22.46

0.290

100

2.70

2.69

0.46

2.70

2.73

1.25

0.013

100

76.3

6125.3

2.57

2.55

1.56

2.59

2.66

3.98

0.041

100

10.7

1558.9

2.28

2.14

8.56

2.33

2.63

18.40

0.226

100

1.6

63.2

3.14

2.27

2.20

5.44

2.32

2.50

12.01

0.136

100

20/3/2009

0.75

2.63

2.61

1.16

2.64

2.69

3.02

0.031

100

07/11/09

0.50

2.56

2.55

1.42

2.59

2.65

3.63

0.038

100

07/11/09

0.93

2.66

2.64

1.30

2.72

2.78

3.50

0.036

100

6b

14/10/08

11.45

2.27

2.04

13.30

2.27

2.73

26.71

0.364

100

6b

40.2

07/11/09

0.87

2.39

2.37

3.99

2.45

2.60

9.41

0.104

100

15.5-15.6

22/12/2008

1.94

9.80

2.35

2.72

21.07

0.267

100

0.00

50.00

6b

25.5-25.6

22/12/2008

2.34

10.70

2.33

2.72

22.52

0.291

100

30.00

50.00

6b

34.5-34.6

22/12/2008

2.13

12.88

2.24

2.67

25.56

0.343

100

10.00

50.00

6b

15.9
9.1

1589.4

L2a

3447.5
10.1

1672.5

L2a
1378.8

11

20

L2a
6b
L2a

21

18

6b

6a
L2b
L2b
62

20

6b
6a
6b

16.4

3236.8

6b

6a

1.4

317.1

Ph lc - Appendix: 7.1
T - Sheet : 2

Dry state

Saturated State

UC test result

TT - N

S hiu mu Sample No.

su Depth, m

Ngy th
nghim - Test
date

25

B7 - R4

37

22/12/2008

26

BB8 - R1

20.5-20.8

07/11/09

10.46

2.30

27

BB8 - R2

38.0-38.5

07/11/09

4.54

2.47

28

BB9 - R1

20.3

07/11/09

3.24

29

BB9 - R2

29.5-30.0

07/11/09

30

BB9 - R3

38.6-39.0

07/11/09

31

B10 - R1

23.8-23.9

22/12/2008

32

B10 - R2

33.3-33.8

33

B12 - R1

34

B12 - R2

35

B13 - R1

36

B14 - R1

7.6

20/3/2009

1.79

2.44

2.40

3.49

2.49

2.62

8.39

0.092

100

37

B14 - R2

14.3

20/3/2009

0.51

2.64

2.62

0.98

2.65

2.69

2.58

0.026

100

38

B14 - R3

20.5-21.0

20/3/2009

0.34

2.61

2.60

0.79

2.62

2.66

2.06

0.021

100

39

B15 - R1

12.2-12.7

20/3/2009

0.20

2.66

2.66

0.71

2.68

2.71

1.89

0.019

40

B16 - R1

20.8

20/3/2009

0.43

2.61

2.60

1.17

2.63

2.68

3.04

41

D1 - R1

39.4-39.7

20/3/2009

3.28

2.60

2.52

3.99

2.62

2.80

42

D2 - R1

15.1-15.3

20/3/2009

1.96

2.49

2.44

4.12

2.54

2.71

43

D2 - R2

36.7-36.9

20/3/2009

1.36

2.56

2.53

2.35

2.59

44

D3 - R1

29.7

20/3/2009

0.48

2.70

2.68

0.80

2.71

45

D5 - R1

38.2

07/11/09

1.55

2.42

2.38

5.26

46

D5 - R2

39.4

07/11/09

0.60

2.44

2.43

4.52

47

L4 - R1

30.7

07/11/09

1.42

2.22

2.19

4.41

48

L4 - R2

38.0-38.5

07/11/09

3.26

2.27

2.20

4.78

2.33

2.49

49

L5 - R1

36.3

07/11/09

2.48

2.04

1.99

12.21

2.24

2.64

50

L5 -R2

38

07/11/09

1.53

1.90

1.88

14.68

2.14

2.56

51

L6 - R1

24

07/11/09

5.71

2.26

2.14

7.29

2.31

2.55

52

L6 - R2

30.8

07/11/09

5.12

2.30

2.19

6.33

2.34

m Moisture
Content, %

Dung trng t- Dung trng kh Wet Density


Dry density
(g/cm3)
(g/cm3)

1.99

m bo ha Dung trng bo
T trng Moisture
ha -Saturated Special Gravity
Content
density (G/cm3)
(G/cm3)
saturated, %

rng Porosity, %

H s rng
- Void ratio

bo
Sc khng nn ha Unconfined
Deg. of
compressive
Saturation strength Qu (MPa)

Sc khng nn Modun bin dng Saturated


Deformation
unconfined
Modulus Es50
compressive
(MPa)
strength Qu (MPa)

Modun bin dng


bo haSaturated
Deformation
Modulus Es50
(MPa)

RQD(%)

FI

12.43

2.23

2.62

24.60

0.326

100

2.08

11.19

2.31

2.71

23.27

0.303

100

6b

2.36

5.99

2.50

2.74

14.11

0.164

100

6b

2.29

2.22

5.54

2.35

2.54

12.33

0.141

100

6a

0.95

2.63

2.61

1.25

2.65

2.70

3.28

0.034

100

6b

0.76

2.64

2.62

1.17

2.65

2.70

3.06

0.032

100

6b

0.48

2.59

2.61

1.24

0.013

100

22/12/2008

0.19

2.67

2.66

0.28

2.67

2.69

0.74

0.007

100

15.5-15.8

25/11/2008

1.65

2.48

2.44

5.11

2.49

2.69

12.10

0.138

100

21.3-21.6

25/11/2008

0.32

2.71

2.70

0.84

2.71

2.75

2.26

0.023

100

25.0-25.3

20/3/2009

0.37

2.61

2.60

0.99

2.63

2.67

2.58

0.026

100

2.61

50.00

Tn
lp Layer

6b

20.00

6b

5601.6

80.00

6b

30

47

6b

10.9

910.8

30

50

6b

15.9

1766.4

L2b

64.6

4460.3

L2b

100

60.2

5019.9

L2b

0.031

100

47.3

3118.8

L2b

10.05

0.112

100

6b

10.05

0.112

100

6b

2.69

5.94

0.063

100

2.74

2.15

0.022

100

6b

2.50

2.71

12.48

0.143

100

6a

2.53

2.72

10.95

0.123

100

6a

2.30

2.44

9.71

0.108

100

6b

10.65

0.119

100

6a

24.41

0.323

100

6a

27.34

0.376

100

6a

15.69

0.186

100

6b

2.56

13.94

0.162

100

6b

59.1

50.7

7377.7

L2a

L2b

7.6

1279.0

6b

53

L6 - R3

36.7

07/11/09

4.15

2.13

2.04

7.87

2.20

2.43

16.05

0.191

100

6b

54

LL8 - R1

67.4-67.9

07/11/09

1.34

2.60

2.56

2.52

2.62

2.73

6.43

0.069

100

6b

Ph lc - Appendix : 7.1
T - Sheet : 3

CNG TY C PHN T VN THIT K CNG - K THUT BIN


PORTCOAST CONSULTANT CORPORATION

KT QU TH NGHIM - ROCK TEST REPORT


Cng trnh - Project:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Khch hng - Client:

CNG TY TNHH GANG THP HNG NGHIP FORMOSA H TNH - FORMOSA HATINH STEEL CORPORATION

THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH

Tn mu - Name of sample: Core rock sample


S lng mu - Quantity:
54
Ngy nhn mu - Date receied10/06/08
Phng php th - Test methoASTM - D2938
iu kin th - Test condition:
Dry state
TT - N

S hiu mu Sample No.

su Depth, m

Ngy th
nghim - Test
date

A10 - R1

23

14/10/08

m Moisture
Content, %
1.40

Saturated State

m bo ha Dung trng bo
Dung trng t- Dung trng kh T trng Moisture
ha -Saturated Special Gravity
Wet Density
Dry density
Content
density (G/cm3)
(g/cm3)
(g/cm3)
(G/cm3)
saturated, %
2.42

2.38

2.79

2.53

2.64

rng Porosity, %

H s rng
- Void ratio

6.87

0.074

Sc khng nn bo
Unconfined
ha compressive
Deg. of
Saturation strength Qu (MPa)

UC test result
Sc khng nn Modun bin dng
Modun bin dng Saturated
bo haDeformation
unconfined
Saturated
Modulus Es50
compressive
Deformation
(MPa)
strength Qu (MPa)
Modulus Es50

RQD(%)

FI

Tn
lp Layer

100

B5 - R1

40.2

07/11/09

0.87

2.39

2.37

3.99

2.45

2.60

9.41

0.104

100

6a

BB9 - R1

20.3

07/11/09

3.24

2.29

2.22

5.54

2.35

2.54

12.33

0.141

100

6a

D5 - R1

38.2

07/11/09

1.55

2.42

2.38

5.26

2.50

2.71

12.48

0.143

100

6a

D5 - R2

39.4

07/11/09

0.60

2.44

2.43

4.52

2.53

2.72

10.95

0.123

100

6a

L4 - R2

38.0-38.5

07/11/09

3.26

2.27

2.20

4.78

2.33

2.49

10.65

0.119

100

6a

L5 - R1

36.3

07/11/09

2.48

2.04

1.99

12.21

2.24

2.64

24.41

0.323

100

6a

L5 -R2

38

07/11/09

1.53

1.90

1.88

14.68

2.14

2.56

27.34

0.376

100

6a

A10 - R2

39.4

14/10/08

7.79

2.22

2.06

10.94

2.28

2.65

22.46

0.290

100

6a

10

B2 - R1

30

20/3/2009

3.14

2.27

2.20

5.44

2.32

2.50

12.01

0.136

100

11

A7 - R1

27.0-27.5

11/11/08

1.40

2.62

2.58

2.53

2.60

2.71

6.43

0.069

100

Trung bnh - Average

2.59

2.29

6.99

2.37

2.61

14.85

0.182

Gtr nh nht - Min Value

0.60

1.90

2.53

2.14

2.49

6.43

0.069

6a
2.7

40.5

21

18

6a
6a

7.79

2.62

14.68

2.60

2.72

27.34

0.376

12

A4 - R1

34.2-34.5

07/11/09

0.86

2.59

2.57

1.71

2.62

2.69

4.40

0.046

100

6b

13

A8 - R1

18.65

07/11/09

2.77

2.07

2.01

7.60

2.16

2.37

15.27

0.180

100

6b

14

A8 - R2

23.3-23.5

07/11/09

1.20

2.14

2.12

5.95

2.23

2.41

12.54

0.143

100

6b

15

A8 - R3

37.3-37.6

07/11/09

0.55

2.09

2.08

6.31

2.20

2.39

13.08

0.150

100

16

B3 - R1

24.3-24.6

07/11/09

0.50

2.56

2.55

1.42

2.59

2.65

3.63

0.038

100

Gtr ln nht - Max value

6b
16.4

3236.8

6b

17

B3 - R2

46.0-47.0

07/11/09

0.93

2.66

2.64

1.30

2.72

2.78

3.50

0.036

100

6b

18

BB8 - R1

20.5-20.8

07/11/09

10.46

2.30

2.08

11.19

2.31

2.71

23.27

0.303

100

6b

19

BB8 - R2

38.0-38.5

07/11/09

4.54

2.47

2.36

5.99

2.50

2.74

14.11

0.164

100

6b

20

BB9 - R2

29.5-30.0

07/11/09

0.95

2.63

2.61

1.25

2.65

2.70

3.28

0.034

100

6b

21

BB9 - R3

38.6-39.0

07/11/09

0.76

2.64

2.62

1.17

2.65

2.70

3.06

0.032

100

6b

22

L4 - R1

30.7

07/11/09

1.42

2.22

2.19

4.41

2.30

2.44

9.71

0.108

100

6b

23

L6 - R1

24

07/11/09

5.71

2.26

2.14

7.29

2.31

2.55

15.69

0.186

100

6b

Ph lc - Appendix : 7.1
T - Sheet : 4
Dry state

Saturated State

TT - N

S hiu mu Sample No.

su Depth, m

Ngy th
nghim - Test
date

24

L6 - R2

30.8

07/11/09

5.12

2.30

2.19

6.33

2.34

25

L6 - R3

36.7

07/11/09

4.15

2.13

2.04

7.87

2.20

26

B4 - R1

15

14/10/08

11.45

2.27

2.04

13.30

27

B2 - R1

43.5

20/3/2009

0.75

2.63

2.61

28

D1 - R1

39.4-39.7

20/3/2009

3.28

2.60

29

D2 - R1

15.1-15.3

20/3/2009

1.96

30

D2 - R2

36.7-36.9

20/3/2009

31

D3 - R1

29.7

20/3/2009

32

B7 - R1

15.5-15.6

22/12/2008

33

B7 - R2

25.5-25.6

34

B7 - R3

34.5-34.6

m Moisture
Content, %

m bo ha Dung trng bo
Dung trng t- Dung trng kh T trng Moisture
ha -Saturated Special Gravity
Wet Density
Dry density
Content
density (G/cm3)
(g/cm3)
(g/cm3)
(G/cm3)
saturated, %

Sc khng nn bo
Unconfined
ha compressive
Deg. of
Saturation strength Qu (MPa)

UC test result
Sc khng nn Modun bin dng
Modun bin dng Saturated
bo haDeformation
unconfined
Saturated
Modulus Es50
compressive
Deformation
(MPa)
strength Qu (MPa)
Modulus Es50

Tn
lp Layer

rng Porosity, %

H s rng
- Void ratio

2.56

13.94

0.162

100

6b

2.43

16.05

0.191

100

6b

2.27

2.73

26.71

0.364

100

6b

1.16

2.64

2.69

3.02

0.031

100

6b

2.52

3.99

2.62

2.80

10.05

0.112

100

6b

2.49

2.44

4.12

2.54

2.71

10.05

0.112

100

6b

1.36

2.56

2.53

2.35

2.59

2.69

5.94

0.063

100

0.48

2.70

2.68

0.80

2.71

2.74

2.15

0.022

100

1.94

9.80

2.35

2.72

21.07

0.267

100

22/12/2008

2.34

10.70

2.33

2.72

22.52

0.291

100

22/12/2008

2.13

12.88

2.24

2.67

25.56

0.343

100

7.6

RQD(%)

FI

1279.0

6b
6b
0.00

1.4

317.1

50.00

6b

30.00

50.00

6b

10.00

50.00

6b

35

B7 - R4

37

22/12/2008

1.99

12.43

2.23

2.62

24.60

0.326

100

50.00

36

B10 - R1

23.8-23.9

22/12/2008

2.61

0.48

2.59

2.61

1.24

0.013

100

20.00

6b

37

B10 - R2

33.3-33.8

22/12/2008

0.19

2.67

2.66

0.28

2.67

2.69

0.74

0.007

100

5601.6

80.00

6b

38

B12 - R1

15.5-15.8

25/11/2008

1.65

2.48

2.44

5.11

2.49

2.69

12.10

0.138

100

30

47

6b

39

B12 - R2

21.3-21.6

25/11/2008

0.32

2.71

2.70

0.84

2.71

2.75

2.26

0.023

100

10.9

910.8

30

50

6b

40

A5 - R1

38.0-38.5

07/11/09

0.90

2.60

2.58

1.44

2.62

2.68

3.73

0.039

100

10.3

2188.3

2.59

2.41

5.15

2.46

2.64

11.15

0.135

Trung bnh - Average


Gtr nh nht - Min Value

0.19

1.94

0.28

2.16

2.37

0.74

0.007

Gtr ln nht - Max value

11.45

2.71

13.30

2.72

2.80

26.71

0.364

59.1

50.7

7377.7

6b

6b
6b

41

A3 - R1

25.6-26.0

11/03/08

0.71

2.69

2.67

0.95

2.69

2.73

2.54

0.026

100

1378.8

11

20

L2a

42

A1 - R1

22

15/10/08

1.14

2.66

2.63

2.09

2.64

2.74

5.43

0.057

100

9.8

10.1
15.9

1989.4

33

L2a

43

A2 - R1

27.2-27.4

20/3/2009

1.69

2.47

2.43

3.24

2.51

2.63

7.86

0.085

100

9.1

1589.4

44

A2 - R2

34.7

20/3/2009

0.20

2.63

2.62

0.71

2.64

2.67

1.87

0.019

100

45

B14 - R1

7.6

20/3/2009

1.79

2.44

2.40

3.49

2.49

2.62

8.39

0.092

100

Trung bnh - Average

1.11

2.58

2.10

2.59

2.68

5.22

0.056

Gtr nh nht - Min Value

0.20

2.44

0.71

2.49

2.62

1.87

0.019

Gtr ln nht - Max value

1.79

2.69

3.49

2.69

2.74

8.39

0.092

28.8

1672.5

L2a

3447.5

L2a
L2a
L2a

46

A15 - R1

26.6-27.0

20/3/2009

0.15

2.70

2.69

0.46

2.70

2.73

1.25

0.013

100

76.3

6125.3

47

A16 - R1

25.7

20/3/2009

0.65

2.57

2.55

1.56

2.59

2.66

3.98

0.041

100

10.7

1558.9

L2b
L2b

48

B13 - R1

25.0-25.3

20/3/2009

0.37

2.61

2.60

0.99

2.63

2.67

2.58

0.026

100

15.9

1766.4

L2b

49

B14 - R2

14.3

20/3/2009

0.51

2.64

2.62

0.98

2.65

2.69

2.58

0.026

100

64.6

4460.3

L2b

50

B14 - R3

20.5-21.0

20/3/2009

0.34

2.61

2.60

0.79

2.62

2.66

2.06

0.021

100

51

B15 - R1

12.2-12.7

20/3/2009

0.20

2.66

2.66

0.71

2.68

2.71

1.89

0.019

100

60.2

5019.9

L2b

52

B16 - R1

20.8

20/3/2009

0.43

2.61

2.60

1.17

2.63

2.68

3.04

0.031

100

47.3

3118.8

Trung bnh - Average

0.38

2.63

0.95

2.64

2.69

2.48

0.026

Gtr nh nht - Min Value

0.15

2.57

0.46

2.59

2.66

1.25

0.013

Gtr ln nht - Max value

0.65

2.70

1.56

2.70

2.73

3.98

0.041

L2b

L2b
L2b

53

B1 - R1

47

11/06/08

6.83

2.28

2.14

8.56

2.33

2.63

18.40

0.226

100

54

LL8 - R1

67.4-67.9

07/11/09

1.34

2.60

2.56

2.52

2.62

2.73

6.43

0.069

100

1.6

63.2

62

20

L2
L1b

APPENDIX 7.1: UNCONFINED COMPRESSION TEST (Qu)FOR ROCK


RESULTS
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Ph lc - Appendix - 7.1
Cng ty C phn T Vn Thit K Cng - K thut Bin - PortCoast Consultant Corporation
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM NN N HNG


SUMMARY OF UNCONFINED COMPESSION TEST RESULT
Cng trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTEGRATED STEEL MILL & SON DUONG PORT FORMOSA HA TINH
Dry state

STT S hiu mu
- Sample
No.
No.

Saturated State

su Depth, m

Ngy th
nghim Test date

m Moisture
Content,
%

Dung trng
t- Wet
Density
(g/cm3)

m bo
ha Moisture
Content
saturated, %

UC test result

Sc khng nn
Dung trng Sc khng nn Tn
Saturated
Unconfined
bo ha lp
unconfined
compressive
Saturated
compressive Layer
strength Qu
density
strength Qu
(MPa)
(G/cm3)
(MPa)

A7 - R1

27.0-27.5

01/11/09

1.40

2.62

2.53

2.60

2.7

6b

12

A5 - R1

38.0-38.5

11/07/09

0.90

2.60

1.44

2.62

10.3

6b

B12 - R2

21.3-21.6

25/11/08

0.32

2.71

0.84

2.71

10.9

6b

B7 - R3

34.5-34.6

22/12/08

2.13

12.88

2.24

1.4

L2b

B10 - R2

33.3-33.8

22/12/08

0.19

2.67

0.28

2.67

50.7

L2a

D2 - R2

36.7-36.9

25/05/09

1.36

2.56

2.35

2.59

7.6

6b

B3 - R1

24.3-24.6

07/11/09

0.50

2.56

1.42

2.59

16.4

6b

A3 - R1

26.0

11/03/08

0.71

2.69

0.95

2.69

10.1

L2a

A1 - R1

22.0

15/10/08

1.14

2.66

2.09

2.64

15.9

L2a

10

A2 - R1

27.2-27.4

23/05/09

1.69

2.47

3.24

2.51

9.1

L2a

11

A2 - R2

34.7

23/05/09

0.20

2.63

0.71

2.64

B1 - R1

46.7-47.00

11/06/08

6.83

2.28

8.56

2.33

1.6

L2b

13

B14 - R2

14.3

22/05/09

0.51

2.64

0.98

2.65

64.6

L2a

14

A15 - R1

26.6-27.0

23/05/09

0.15

2.70

0.46

2.70

76.3

L2a

15

A16 - R1

25.7

23/05/09

0.65

2.57

1.56

2.59

10.7

L2a

16

B13 - R1

25.0-25.3

23/05/09

0.37

2.61

0.99

2.63

15.9

L2a

17

B15 - R1

12.2-12.7

23/05/09

0.20

2.66

0.71

2.68

60.2

L2a

18

B16 - R1

20.8

23/05/09

0.43

2.61

1.17

2.63

47.3

L2a

59.1

9.8

28.8

L2a

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 1.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
A1 - R1

S hiu LK No.

A1

18.0

su - Depth, m.

23.00

16.0

Ngy th nghim - Tested Date

15/10/08

14.0

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

1.14

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.659

Dung trng kh - Dry Density, g/cm3

2.629

Chiu cao mu - Initial Height, mm

75.0

ng knh mu - Diameter, mm

61.0

Tit din mu - Area, cm2

29.22

ng sut - Stress, MPa

S hiu mu - Sample No

12.0
10.0
8.0
6.0
4.0
2.0
0.0
0.00

0.20

0.40

0.60

0.80

1.00

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1989.4
15.9

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

29.22

0.00

0.0

0.055

0.07

29.25

4.00

1.4

0.110

0.15

29.27

8.20

2.8

0.165

0.22

29.29

12.50

4.3

0.220

0.29

29.31

16.80

5.7

0.275

0.37

29.33

21.00

7.2

0.330

0.44

29.35

26.18

8.9

0.385

0.51

29.38

31.22

10.6

0.440

0.59

29.40

37.81

12.9

0.495

0.66

29.42

42.85

14.6

0.550

0.73

29.44

46.83

15.9

0.605

0.81

29.46

35.87

12.2

0.660

0.88

29.48

24.92

8.5

0.715

0.95

29.51

23.27

7.9

0.770

1.03

29.53

21.91

7.4

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.20

Bin dng - Strain, %

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 2.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A2-R1

S hiu LK No.

A2

su - Depth, m.

27.2-27.4

9.00

Ngy th nghim - Tested Date

23/5/2009

8.00

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

2.92

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.385

Dung trng kh - Dry Density, g/cm3

2.317

Chiu cao mu - Initial Height, mm

123.0

ng knh mu - Diameter, mm

61.5

Tit din mu - Area, cm2

29.71

ng sut - Stress, MPa

10.00

7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
0.00

0.20

0.40

0.60

0.80

1.00

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1589.4
9.1

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

29.71

0.00

0.0

0.109

0.09

29.73

5.07

1.7

0.208

0.17

29.76

9.00

3.0

0.331

0.27

29.79

12.91

4.3

0.450

0.37

29.81

16.59

5.6

0.589

0.48

29.85

20.17

6.8

0.742

0.60

29.89

23.74

7.9

0.886

0.72

29.92

26.32

8.8

1.044

0.85

29.96

27.34

9.1

1.212

0.99

30.00

20.46

6.8

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.20

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 3.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A2-R2

S hiu LK No.

A2

su - Depth, m.

34.70

Ngy th nghim - Tested Date

23/5/2009

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.66

Trng thi - State

Kh - Dry

Dung trng t - Wet Density, g/cm3

2.539

Dung trng kh - Dry Density, g/cm3

2.522

35.00

ng sut - Stress, MPa

30.00
25.00
20.00
15.00
10.00
5.00

Chiu cao mu - Initial Height, mm

123.0

ng knh mu - Diameter, mm

61.5

Tit din mu - Area, cm2

29.71

0.00
0.00

0.20

0.40

0.60

0.80

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

3447.5
28.8

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

29.71

0.00

0.0

0.125

0.10

29.74

6.88

2.3

0.222

0.18

29.76

14.15

4.8

0.315

0.26

29.78

22.59

7.6

0.400

0.33

29.80

31.60

10.6

0.485

0.39

29.82

39.40

13.2

0.562

0.46

29.84

48.86

16.4

0.640

0.52

29.86

57.50

19.3

0.707

0.57

29.88

65.30

21.9

0.780

0.63

29.90

72.20

24.2

0.836

0.68

29.91

79.70

26.6

0.893

0.73

29.92

86.30

28.8

0.945

0.77

29.94

86.09

28.8

1.000

0.81

29.95

3.39

1.1

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 3.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A3 - R1

S hiu LK No.

A3

su - Depth, m.

25.6-26.0

Ngy th nghim - Tested Date

11/03/08

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.95

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.692

Dung trng kh - Dry Density, g/cm3

2.667

Chiu cao mu - Initial Height, mm

91.5

ng knh mu - Diameter, mm

60.6

Tit din mu - Area, cm2

28.84

12.0

ng sut - Stress, MPa

10.0

8.0

6.0

4.0

2.0

0.0
0.00

0.20

0.40

0.60

0.80

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1378.8
10.0

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

28.84

0.00

0.0

0.058

0.06

28.86

1.90

0.7

0.116

0.13

28.88

4.30

1.5

0.174

0.19

28.90

7.66

2.7

0.232

0.25

28.92

10.47

3.6

0.290

0.32

28.93

12.80

4.4

0.348

0.38

28.95

15.12

5.2

0.406

0.44

28.97

17.20

5.9

0.464

0.51

28.99

19.20

6.6

0.522

0.57

29.01

21.04

7.3

0.580

0.63

29.03

23.60

8.1

0.638

0.70

29.05

25.98

8.9

0.696

0.76

29.06

28.40

9.8

0.754

0.82

29.08

29.08

10.0

0.812

0.89

29.10

1.07

0.4

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 4.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A3 - R1

S hiu LK No.

A3

su - Depth, m.

25.6-26.0

Ngy th nghim - Tested Date

11/03/08

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.71

Trng thi - State

Kh - Dry

Dung trng t - Wet Density, g/cm3

2.689

Dung trng kh - Dry Density, g/cm3

2.670

Chiu cao mu - Initial Height, mm

100.0

ng knh mu - Diameter, mm

60.6

Tit din mu - Area, cm2

28.84

12.0

ng sut - Stress, MPa

10.0

8.0

6.0

4.0

2.0

0.0
0.00

0.20

0.40

0.60

0.80

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1672.5
9.7

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

28.84

0.00

0.0

0.061

0.06

28.86

2.91

1.0

0.122

0.12

28.88

6.01

2.1

0.183

0.18

28.90

9.00

3.1

0.244

0.24

28.91

11.54

4.0

0.305

0.31

28.93

14.83

5.1

0.366

0.37

28.95

17.60

6.1

0.427

0.43

28.97

20.84

7.2

0.488

0.49

28.98

23.60

8.1

0.549

0.55

29.00

25.60

8.8

0.610

0.61

29.02

27.92

9.6

0.671

0.67

29.04

28.31

9.7

0.732

0.73

29.06

12.60

4.3

0.793

0.79

29.07

8.05

2.8

0.854

0.85

29.09

6.60

2.3

0.915

0.92

29.11

5.50

1.9

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 5.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A5 -R1

S hiu LK No.

A5

su - Depth, m.

38.0 - 38.5

Ngy th nghim - Tested Date

11/07/09

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

1.44

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.621

Dung trng kh - Dry Density, g/cm3

2.584

Chiu cao mu - Initial Height, mm

120.0

ng knh mu - Diameter, mm

60.0

Tit din mu - Area, cm2

28.27

12.0

ng sut - Stress, MPa

10.0

8.0

6.0

4.0

2.0

0.0
0.00

0.20

0.40

0.60

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

2188.3
10.3

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

28.27

0.00

0.0

0.058

0.05

28.29

3.30

1.2

0.116

0.10

28.30

6.30

2.2

0.174

0.15

28.32

9.10

3.2

0.232

0.19

28.33

12.20

4.3

0.290

0.24

28.34

14.90

5.3

0.348

0.29

28.36

17.30

6.1

0.406

0.34

28.37

19.30

6.8

0.464

0.39

28.38

21.40

7.5

0.522

0.44

28.40

23.80

8.4

0.580

0.48

28.41

25.80

9.1

0.638

0.53

28.43

27.70

9.7

0.696

0.58

28.44

29.20

10.3

0.754

0.63

28.45

29.08

10.2

0.812

0.68

28.47

1.07

0.4

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

0.80

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 6.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A7 - R1

S hiu LK No.

A7

su - Depth, m.

27-27.5

Ngy th nghim - Tested Date

11/11/08

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

2.53

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.604

Dung trng kh - Dry Density, g/cm3

2.540

Chiu cao mu - Initial Height, mm

65.0

ng knh mu - Diameter, mm

61.0

Tit din mu - Area, cm2

29.22

3.00

ng sut - Stress, MPa

2.50

2.00

1.50

1.00

0.50

0.00
0.00

5.00

10.00

15.00

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

40.5
2.7

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

29.22

0.00

0.0

1.197

1.84

29.77

2.30

0.8

2.394

3.68

30.34

4.51

1.5

3.591

5.52

30.93

6.20

2.0

4.788

7.37

31.55

7.56

2.4

5.985

9.21

32.19

8.29

2.6

7.182

11.05

32.85

9.00

2.7

8.379

12.89

33.55

9.20

2.7

9.576

14.73

34.27

4.50

1.3

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

20.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 7.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
A15-R1

S hiu LK No.

A15

90.00

su - Depth, m.

26.6-27.0

80.00

Ngy th nghim - Tested Date

23/5/2009

70.00

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.19

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.653

Dung trng kh - Dry Density, g/cm3

2.648

Chiu cao mu - Initial Height, mm

123.0

ng knh mu - Diameter, mm

61.5

Tit din mu - Area, cm2

29.71

ng sut - Stress, MPa

S hiu mu - Sample No

60.00
50.00
40.00
30.00
20.00
10.00
0.00
0.00

0.20

0.40

0.60

0.80

1.00

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

6125.3
76.3

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

29.71

0.00

0.0

0.101

0.08

29.73

6.98

2.3

0.180

0.15

29.75

15.12

5.1

0.252

0.21

29.77

25.59

8.6

0.313

0.25

29.78

34.61

11.6

0.378

0.31

29.80

44.30

14.9

0.429

0.35

29.81

53.32

17.9

0.490

0.40

29.82

62.63

21.0

0.548

0.45

29.84

71.74

24.0

0.598

0.49

29.85

80.95

27.1

0.631

0.51

29.86

93.60

31.3

0.699

0.57

29.88

100.43

33.6

0.753

0.61

29.89

110.23

36.9

0.785

0.64

29.90

119.82

40.1

0.836

0.68

29.91

129.52

43.3

0.872

0.71

29.92

139.02

46.5

0.969

0.79

29.94

154.80

51.7

1.059

0.86

29.96

173.92

58.0

1.117

0.91

29.98

196.10

65.4

1.207

0.98

30.00

220.00

73.3

1.306

1.06

30.02

229.08

76.3

1.396

1.13

30.05

5.91

2.0

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.20

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 8.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

A16-R1

S hiu LK No.

A16

su - Depth, m.

25.70

Ngy th nghim - Tested Date

23/5/2009

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

1.29

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.565

Dung trng kh - Dry Density, g/cm3

2.533

Chiu cao mu - Initial Height, mm

123.0

ng knh mu - Diameter, mm

61.5

Tit din mu - Area, cm2

29.71

12.00

ng sut - Stress, MPa

10.00

8.00

6.00

4.00

2.00

0.00
0.00

0.50

1.00

1.50

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1558.9
10.7

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

29.71

0.00

0.0

0.076

0.06

29.72

3.60

1.2

0.194

0.16

29.75

7.80

2.6

0.311

0.25

29.78

11.90

4.0

0.429

0.35

29.81

16.20

5.4

0.572

0.47

29.84

21.20

7.1

0.700

0.57

29.88

25.40

8.5

0.825

0.67

29.91

28.90

9.7

1.013

0.82

29.95

31.00

10.3

1.185

0.96

29.99

32.20

10.7

1.354

1.10

30.04

32.10

10.7

1.502

1.22

30.07

30.83

10.3

1.670

1.36

30.11

25.79

8.6

1.852

1.51

30.16

12.02

4.0

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

2.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 9.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
B1 - R1

S hiu LK No.

B1

1.80

su - Depth, m.

46.7-47.00

1.60

Ngy th nghim - Tested Date

11/06/08

1.40

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

8.56

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.34

Dung trng kh - Dry Density, g/cm3

2.151

Chiu cao mu - Initial Height, mm

97.0

ng knh mu - Diameter, mm

61.0

Tit din mu - Area, cm2

29.22

ng sut - Stress, MPa

S hiu mu - Sample No

1.20
1.00
0.80
0.60
0.40
0.20
0.00
0.00

1.00

2.00

3.00

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

63.2
1.6

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

29.22

0.00

0.0

0.400

0.41

29.35

0.84

0.3

0.800

0.82

29.47

1.60

0.5

1.200

1.24

29.59

2.30

0.8

1.600

1.65

29.71

3.20

1.1

2.000

2.06

29.84

4.10

1.4

2.400

2.47

29.97

4.85

1.6

2.800

2.89

30.09

4.00

1.3

3.200

3.30

30.22

3.10

1.0

3.600

3.71

30.35

2.13

0.7

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

4.00

Bin dng - Strain, %

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 10.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
B3 - R2

S hiu LK No.

B3

18.0

su - Depth, m.

46.0-47.0

16.0

Ngy th nghim - Tested Date

07/11/09

14.0

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

1.30

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.722

Dung trng kh - Dry Density, g/cm3

2.687

Chiu cao mu - Initial Height, mm

122.0

ng knh mu - Diameter, mm

61.0

Tit din mu - Area, cm2

29.22

ng sut - Stress, MPa

S hiu mu - Sample No

12.0
10.0
8.0
6.0
4.0
2.0
0.0
0.00

0.20

0.40

0.60

0.80

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

3236.8
16.4

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

29.22

0.00

0.0

0.079

0.06

29.24

7.60

2.6

0.158

0.13

29.26

14.30

4.9

0.237

0.19

29.28

19.40

6.6

0.316

0.26

29.30

24.60

8.4

0.395

0.32

29.32

31.20

10.6

0.474

0.39

29.34

36.40

12.4

0.553

0.45

29.36

41.60

14.2

0.632

0.52

29.38

45.60

15.5

0.711

0.58

29.40

48.30

16.4

0.790

0.65

29.42

46.90

15.9

0.869

0.71

29.43

41.90

14.2

0.948

0.78

29.45

32.40

11.0

1.027

0.84

29.47

25.00

8.5

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.00

Bin dng - Strain, %

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 11.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

B7 - R3

S hiu LK No.

B7

su - Depth, m.

35.4-35.6

Ngy th nghim - Tested Date

22/12/2008

Ngi th nghim - Tested by.

Nguyn Hng Sn

1.60

m - Moisture Content initial, %

12.88

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.24

Dung trng kh - Dry Density, g/cm3

1.985

ng sut - Stress, MPa

1.40
1.20
1.00
0.80
0.60
0.40
0.20

Chiu cao mu - Initial Height, mm

116.5

ng knh mu - Diameter, mm

61.0

Tit din mu - Area, cm2

29.22

0.00
0.00

0.10

0.20

0.30

0.40

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

317.1
1.4

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

29.22

0.00

0.0

0.050

0.04

29.24

0.29

0.1

0.100

0.09

29.25

0.68

0.2

0.150

0.13

29.26

1.07

0.4

0.200

0.17

29.27

1.45

0.5

0.250

0.21

29.29

1.98

0.7

0.300

0.26

29.30

2.44

0.8

0.350

0.30

29.31

3.20

1.1

0.400

0.34

29.33

3.97

1.4

0.450

0.39

29.34

4.17

1.4

0.500

0.43

29.35

0.29

0.1

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

0.50

Bin dng - Strain, %

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 12.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

B10 - R2

S hiu LK No.

B10

su - Depth, m.

33.3-33.8

Ngy th nghim - Tested Date

22/12/2008

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.28

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.67

Dung trng kh - Dry Density, g/cm3

2.665

Chiu cao mu - Initial Height, mm

122.0

ng knh mu - Diameter, mm

60.5

Tit din mu - Area, cm2

28.75

60.0

ng sut - Stress, MPa

50.0

40.0

30.0

20.0

10.0

0.0
0.00

0.20

0.40

0.60

0.80

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

5601.6
50.7

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

28.75

0.00

0.0

0.050

0.04

28.76

2.42

0.8

0.100

0.08

28.77

7.27

2.5

0.150

0.12

28.78

12.41

4.3

0.200

0.16

28.79

17.45

6.1

0.250

0.20

28.81

23.46

8.1

0.300

0.25

28.82

30.83

10.7

0.350

0.29

28.83

38.00

13.2

0.400

0.33

28.84

46.05

16.0

0.450

0.37

28.85

54.29

18.8

0.500

0.41

28.87

63.60

22.0

0.550

0.45

28.88

72.81

25.2

0.600

0.49

28.89

82.02

28.4

0.650

0.53

28.90

92.20

31.9

0.700

0.57

28.91

102.57

35.5

0.750

0.61

28.93

108.68

37.6

0.800

0.66

28.94

117.50

40.6

0.850

0.70

28.95

128.07

44.2

0.900

0.74

28.96

133.01

45.9

0.950

0.78

28.97

137.76

47.5

1.000

0.82

28.99

142.80

49.3

1.050

0.86

29.00

147.07

50.7

1.100

0.90

29.01

138.93

47.9

1.150

0.94

29.02

32.19

11.1

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 13.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

B12 - R2

S hiu LK No.

B12

su - Depth, m.

21.3-21.6

Ngy th nghim - Tested Date

25/11/2008

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.84

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.71

Dung trng kh - Dry Density, g/cm3

2.689

Chiu cao mu - Initial Height, mm

104.5

ng knh mu - Diameter, mm

61.0

Tit din mu - Area, cm2

29.22

12.00

ng sut - Stress, MPa

10.00

8.00

6.00

4.00

2.00

0.00
0.00

0.50

1.00

1.50

2.00

2.50

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

910.8
10.9

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, KN

ng sut
Stress, MPa

0.000

0.00

29.22

0.00

0.0

0.172

0.16

29.27

3.98

1.4

0.344

0.33

29.32

8.73

3.0

0.516

0.49

29.37

13.20

4.5

0.688

0.66

29.42

17.65

6.0

0.860

0.82

29.47

22.78

7.7

1.032

0.99

29.52

28.31

9.6

1.204

1.15

29.57

32.19

10.9

1.376

1.32

29.61

19.29

6.5

1.548

1.48

29.66

17.00

5.7

1.720

1.65

29.71

16.00

5.4

1.892

1.81

29.76

15.22

5.1

2.064

1.98

29.81

16.68

5.6

2.236

2.14

29.86

18.91

6.3

2.494

2.39

29.94

14.45

4.8

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

3.00

Bin dng - Strain, %

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 14.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
B13-R1

S hiu LK No.

B13

18.00

su - Depth, m.

25.0-25.3

16.00

Ngy th nghim - Tested Date

23/5/2009

14.00

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.84

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.579

Dung trng kh - Dry Density, g/cm3

2.558

Chiu cao mu - Initial Height, mm

100.0

ng knh mu - Diameter, mm

50.0

Tit din mu - Area, cm2

19.63

ng sut - Stress, MPa

S hiu mu - Sample No

12.00
10.00
8.00
6.00
4.00
2.00
0.00
0.00

0.20

0.40

0.60

0.80

1.00

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1766.4
15.9

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

19.63

0.00

0.0

0.089

0.09

19.65

2.50

1.3

0.170

0.17

19.67

5.20

2.6

0.267

0.27

19.69

8.20

4.2

0.335

0.34

19.70

10.76

5.5

0.411

0.41

19.72

13.57

6.9

0.466

0.47

19.73

16.58

8.4

0.526

0.53

19.74

19.50

9.9

0.595

0.59

19.75

22.10

11.2

0.649

0.65

19.76

25.30

12.8

0.721

0.72

19.78

27.50

13.9

0.776

0.78

19.79

29.70

15.0

0.835

0.84

19.80

31.20

15.8

0.908

0.91

19.81

31.41

15.9

0.963

0.96

19.83

23.65

11.9

1.004

1.00

19.83

13.96

7.0

0.00

19.63

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.20

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 15.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

B14-R2

S hiu LK No.

B14

su - Depth, m.

14.30

Ngy th nghim - Tested Date

22/5/2009

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.87

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.456

Dung trng kh - Dry Density, g/cm3

2.434

70.00

ng sut - Stress, MPa

60.00
50.00
40.00
30.00
20.00
10.00

Chiu cao mu - Initial Height, mm

123.0

ng knh mu - Diameter, mm

61.5

Tit din mu - Area, cm2

29.71

0.00
0.00

0.50

1.00

1.50

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

4460.3
64.6

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

29.71

0.00

0.0

0.134

0.11

29.74

4.75

1.6

0.297

0.24

29.78

18.52

6.2

0.445

0.36

29.81

36.26

12.2

0.591

0.48

29.85

55.84

18.7

0.721

0.59

29.88

75.52

25.3

0.879

0.71

29.92

95.10

31.8

1.009

0.82

29.95

114.59

38.3

1.142

0.93

29.98

133.49

44.5

1.258

1.02

30.01

152.01

50.6

1.406

1.14

30.05

170.23

56.7

1.560

1.27

30.09

187.88

62.4

1.746

1.42

30.13

194.66

64.6

1.899

1.54

30.17

49.64

16.5

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

2.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 16.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

B15-R1

S hiu LK No.

B15

su - Depth, m.

12.2-12.7

Ngy th nghim - Tested Date

23/5/2009

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.26

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.638

Dung trng kh - Dry Density, g/cm3

2.631

70.00

ng sut - Stress, MPa

60.00
50.00
40.00
30.00
20.00
10.00

Chiu cao mu - Initial Height, mm

123.0

ng knh mu - Diameter, mm

61.5

Tit din mu - Area, cm2

29.71

0.00
0.00

0.20

0.40

0.60

0.80

1.00

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

5019.9
60.2

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

29.71

0.00

0.0

0.075

0.06

29.72

9.40

3.2

0.168

0.14

29.75

20.00

6.7

0.243

0.20

29.76

27.50

9.2

0.324

0.26

29.78

36.00

12.1

0.376

0.31

29.80

43.14

14.5

0.445

0.36

29.81

50.70

17.0

0.520

0.42

29.83

59.62

20.0

0.609

0.50

29.85

68.15

22.8

0.659

0.54

29.87

77.17

25.8

0.717

0.58

29.88

87.40

29.3

0.778

0.63

29.89

95.01

31.8

0.832

0.68

29.91

104.99

35.1

0.872

0.71

29.92

114.20

38.2

0.933

0.76

29.93

123.51

41.3

0.980

0.80

29.94

133.01

44.4

1.034

0.84

29.96

141.90

47.4

1.092

0.89

29.97

152.10

50.7

1.139

0.93

29.98

161.41

53.8

1.192

0.97

30.00

171.59

57.2

1.250

1.02

30.01

180.61

60.2

1.313

1.07

30.03

2.52

0.8

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.20

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 17.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
B16-R1

S hiu LK No.

B16

50.00

su - Depth, m.

20.80

45.00

Ngy th nghim - Tested Date

23/5/2009

40.00

Ngi th nghim - Tested by.

Nguyn Hng Sn

m - Moisture Content initial, %

0.56

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.586

Dung trng kh - Dry Density, g/cm3

2.572

Chiu cao mu - Initial Height, mm

100.0

ng knh mu - Diameter, mm

50.0

Tit din mu - Area, cm2

19.63

ng sut - Stress, MPa

S hiu mu - Sample No

35.00
30.00
25.00
20.00
15.00
10.00
5.00
0.00
0.00

0.25

0.50

0.75

1.00

1.25

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

3118.8
47.3

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

19.63

0.00

0.0

0.148

0.15

19.66

4.00

2.0

0.231

0.23

19.68

7.60

3.9

0.302

0.30

19.69

11.70

5.9

0.385

0.39

19.71

15.51

7.9

0.468

0.47

19.73

20.75

10.5

0.522

0.52

19.74

26.17

13.3

0.580

0.58

19.75

30.63

15.5

0.637

0.64

19.76

36.26

18.3

0.706

0.71

19.77

41.10

20.8

0.760

0.76

19.79

47.00

23.8

0.800

0.80

19.79

51.57

26.1

0.857

0.86

19.80

55.45

28.0

0.897

0.90

19.81

60.40

30.5

0.929

0.93

19.82

65.15

32.9

0.987

0.99

19.83

69.99

35.3

1.034

1.03

19.84

74.45

37.5

1.074

1.07

19.85

79.20

39.9

1.117

1.12

19.86

84.15

42.4

1.153

1.15

19.86

88.41

44.5

1.246

1.25

19.88

94.00

47.3

1.332

1.33

19.90

92.58

46.5

1.417

1.42

19.92

70.96

35.6

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.50

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.1 - 18.1
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIM SC KHNG NN MT TRC CA - UNAXIAL COMPRESSIVE TEST FOR INTACT ROCK


Cng trnh - Project.

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH


THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu - Sample No

D2-R2

S hiu LK No.

D2

su - Depth, m.

36.7-36.9

Ngy th nghim - Tested Date

25/5/2009

Ngi th nghim - Tested by.

Nguyn Hng Sn

8.00

m - Moisture Content initial, %

1.95

Trng thi - State

Bo ha - Saturated

Dung trng t - Wet Density, g/cm3

2.485

Dung trng kh - Dry Density, g/cm3

2.438

ng sut - Stress, MPa

7.00
6.00
5.00
4.00
3.00
2.00
1.00

Chiu cao mu - Initial Height, mm

98.0

ng knh mu - Diameter, mm

49.0

Tit din mu - Area, cm2

18.86

0.00
0.00

0.20

0.40

0.60

0.80

Bin dng - Strain, %

Modun bin dng-Deformation Modulus E s50, MPa:


Sc khng nn - Unconfined Compressive Strength q u, MPa

1279.0
7.6

Bin dng
Displacement,
mm

Bin dng
Strain, %

Tit din
2
Corrected Area, cm

Ti trng
Axial Load, kN

ng sut
Stress, MPa

0.000

0.00

18.86

0.00

0.0

0.119

0.12

18.88

2.92

1.5

0.248

0.25

18.91

6.14

3.2

0.393

0.40

18.93

9.37

4.9

0.554

0.57

18.96

12.84

6.8

0.728

0.74

19.00

14.35

7.6

0.888

0.91

19.03

2.91

1.5

Bulge

Single

Multiple

Vertical

Type of failure:
Blge

Sketch of failure:

1.00

Single Shear Plane


Multiple Shear Plane
Vertical Fracture

APPENDIX 7.2: DIRECT SHEAR TEST FOR ROCK RESULTS


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Phu luc - Appendix: 7.2


T - Sheet: 1

Cng ty C phn T Vn Thit K Cng - K thut Bin - PortCoast Consultant Corporation

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM CT TRC TIP


SUMMARY OF DIRECT SHEAR TEST RESULT FOR INTACT CORE ROCK
Cng trnh: KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
Project:

STT
No

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu
su Depth
Sample
(m)
name
1

Ngy th
m Dung trng Gc ma st trong Lc dnh - Internal Friction Cohesion c
nghim Test
Moisture
Density
date
Content initial % (G/cm3)
(MPa)
Angle
3

Lp
Layer

A1-R1

22.00

13-01-09

1.14

2.66

4047

3.20

L2a

A4-R1

34.2 - 34.5

06-08-09

1.71

2.62

3653

12.70

L2a

A16-R1

B3-R2

5
6

34.60

06-08-09

391

12.20

L2a

46.0 - 47

11-07-09

1.30

2.72

281

4.00

6b

BB8-R2

38.0 - 38.5

11-07-09

5.99

2.50

2734

5.70

6b

BB9-R3

38.6 - 39.0

11-07-09

1.17

2.65

272

8.40

6b

B10-R2

33.00

13-01-09

0.28

2.67

3636

10.50

6b

B14-R1

16.30

06-08-09

3357

14.20

L2a

D1-R1

37.10

08-06-09

3.99

2.62

2621

8.90

6b

10

D3-R1

29.70

13-01-09

0.80

2.71

2557

7.00

6b

Phu luc - Appendix: 7.2


T - Sheet: 2

Cng ty C phn T Vn Thit K Cng - K thut Bin - PortCoast Consultant Corporation

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM CT TRC TIP


SUMMARY OF DIRECT SHEAR TEST RESULT FOR INTACT CORE ROCK
Cng trnh: KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
Project:

STT
No

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

S hiu mu
su Depth
Sample
(m)
name
1

Ngy th
m Dung trng Gc ma st trong Lc dnh - Internal Friction Cohesion c
nghim Test
Moisture
Density
date
Content initial % (G/cm3)
(MPa)
Angle
3

Lp
Layer

A4-R1

34.2 - 34.5

06-08-09

1.71

2.62

3653

12.70

L2a

BB8-R2

38.0 - 38.5

11-07-09

5.99

2.50

2734

5.70

6b

D1-R1

37.10

08-06-09

3.99

2.62

2621

8.90

6b

D3-R1

29.70

13-01-09

0.80

2.71

2557

7.00

6b

B3-R2

BB9-R3

46.0 - 47

11-07-09

1.30

2.72

281

4.00

6b

38.6 - 39.0

11-07-09

1.17

2.65

272

8.40

6b

A1-R1

22.00

13-01-09

1.14

2.66

4047

3.20

L2a

B14-R1

16.30

06-08-09

3357

14.20

L2a

A16-R1

34.60

06-08-09

391

12.20

L2a

10

B10-R2

33.00

13-01-09

3636

10.50

L2b

0.28

2.67

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

A1-R1

So hieu mau - Sample No. :


o sau - Depth, m :

Mo Ta - Description: Rhyolite

22

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.208

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/M

12.492

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

First Trial

Second Trial

13-01-'09

13-01-'09

o am - Moisture Content, %

1.14

1.14

2.66

2.66

Dung trong kho - Dry Density, g/cm 3

2.63

2.63

ng suat chnh - Normal stress, MPa

23.1

3.6

Giai oan cat

ng suat cat - Max. shear stress, MPa

23.1

6.3

Shear Stage

Chuyen v ngang - Shear. Displacement, mm

0.98

0.94

45

30

Ban au

Dung trong t - Wet Density, g/cm

Initial

Gc ct - Shear plane angle,


Sc khang cat

Goc ma sat trong - Internal Friction Angle

4047

Shear Strength Lc dnh - Cohesion c, MPa

3.2
ng suat cat - Shear Stress, Mpa

25.0

15.0

20.0
15.0
10.0
5.0
0.0
0.0

5.0

10.0

15.0

20.0

25.0

Cac ng suat chnh - Normal Stresses, MPa

10.0
25.0

5.0

0.0
0.0

0.5

1.0

1.5

2.0

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.5

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

20.0

25.0

20.0

15.0

10.0

5.0

0.0
0.0

5.0

10.0

15.0

20.0

25.0

Cac ng suat chnh - Normal Stresses, MPa

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 2

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
A1-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
13-01-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc ct - Shear plane angle, degree
.K mu - Specimen diameter
61.0
mm

0.00
3.20
6.90
10.40
14.35
17.00
19.58
21.30
20.84
15.12
9.31
7.50
7.17
7.00
7.27
7.30
7.27
7.17
7.27

0.000
0.155
0.310
0.465
0.620
0.774
0.929
1.084
1.239
1.394
1.549
1.704
1.859
2.014
2.168
2.323
2.478
2.633
2.711

0.000
1.600
3.450
5.200
7.174
8.500
9.791
10.650
10.421
7.562
4.653
3.750
3.586
3.500
3.635
3.650
3.635
3.586
3.635

0.000
2.771
5.976
9.007
12.425
14.722
16.959
18.446
18.050
13.097
8.060
6.495
6.212
6.062
6.296
6.322
6.296
6.212
6.296

0.000
0.134
0.268
0.402
0.537
0.671
0.805
0.939
1.073
1.207
1.341
1.475
1.610
1.744
1.878
2.012
2.146
2.280
2.347

29.2246657
29.2246656
29.2246656
29.2246655
29.2246655
29.2246655
29.2246654
29.2246654
29.2246653
29.2246653
29.2246653
29.2246652
29.2246652
29.2246651
29.2246651
29.2246650
29.2246650
29.2246650
29.2246649

0.00
0.55
1.18
1.78
2.45
2.91
3.35
3.64
3.57
2.59
1.59
1.28
1.23
1.20
1.24
1.25
1.24
1.23
1.24

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

59.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
0.948
2.045
3.082
4.252
5.038
5.803
6.312
6.176
4.481
2.758
2.223
2.126
2.074
2.154
2.163
2.154
2.126
2.154

-4.208
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 3

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
A1-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
13-01-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc ct - Shear plane angle, degree
.K mu - Specimen diameter
61.0
mm

0.00
5.90
12.00
16.48
23.66
30.44
35.39
40.62
46.44
52.54
57.10
62.72
68.35
73.68
79.11
84.15
90.26
95.30
81.60
78.00
76.00
75.10
73.90

0.000
0.081
0.163
0.244
0.326
0.407
0.489
0.570
0.652
0.733
0.815
0.896
0.978
1.059
1.141
1.222
1.303
1.385
1.466
1.548
1.629
1.711
1.79

0.000
4.172
8.485
11.654
16.727
21.525
25.021
28.723
32.836
37.155
40.376
44.353
48.329
52.099
55.938
59.502
63.821
67.386
57.700
55.154
53.740
53.104
52.255

0.000
4.172
8.485
11.654
16.727
21.525
25.021
28.723
32.836
37.155
40.376
44.353
48.329
52.099
55.938
59.502
63.821
67.386
57.700
55.154
53.740
53.104
52.255

0.000
0.058
0.115
0.173
0.230
0.288
0.346
0.403
0.461
0.518
0.576
0.634
0.691
0.749
0.806
0.864
0.922
0.979
1.037
1.094
1.152
1.210
1.267

29.2246657
29.2246656
29.2246656
29.2246656
29.2246656
29.2246656
29.2246656
29.2246655
29.2246655
29.2246655
29.2246655
29.2246655
29.2246654
29.2246654
29.2246654
29.2246654
29.2246654
29.2246654
29.2246653
29.2246653
29.2246653
29.2246653
29.2246653

0.00
1.43
2.90
3.99
5.72
7.37
8.56
9.83
11.24
12.71
13.82
15.18
16.54
17.83
19.14
20.36
21.84
23.06
19.74
18.87
18.39
18.17
17.88

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
1.428
2.903
3.988
5.723
7.365
8.562
9.828
11.236
12.713
13.816
15.177
16.537
17.827
19.141
20.360
21.838
23.058
19.744
18.873
18.389
18.171
17.881

-4.208
12.492
45

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

A4-R1

So hieu mau - Sample No. :


o sau - Depth, m :

Mo Ta - Description: Rhyolite

34.2-34.5

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.540

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

12.492

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date
Ban au
Initial

Giai oan cat


Shear Stage

o am - Moisture Content, %

Mau th 1

Mau th 2

First Trial

Second Trial

06-08-'09

06-08-'09

1.71

1.71

2.62

2.62

Dung trong kho - Dry Density, g/cm

2.57

2.57

ng suat chnh - Normal stress, MPa

50.8

12.9

ng suat cat - Max. shear stress, MPa

50.8

22.4

Chuyen v ngang - Shear. Displacement, mm

1.99

2.13

45

30

Dung trong t - Wet Density, g/cm

Goc gia hng cat va phng thang ng


Angle between direction of shearing and vertical, o
Sc khang cat

Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

3653
12.7

60.0
ng suat cat - Shear Stress, Mpa

60.0

ng suat cat - Shear Stress, MPa

50.0

40.0

50.0
40.0
30.0
20.0
10.0

30.0
0.0
0.0

Ca
c ng sua
t chnh 30.0
- Normal Stresses,
MPa
10.0
20.0
40.0
50.0

60.0

60.0

20.0

10.0

ng suat cat - Shear Stress, MPa

50.0

40.0

30.0

0.0
0.0

Chuye
0.5 n v ngang
1.0 - Shear.
1.5 Disp, mm
2.0

2.5

20.0

Legends:
Mu th 1 - The First Trial

10.0

Mu th 2 - The Second Trial


Mu th 3 - The Third Trial

0.0
0.0

Ca
c ng sua
t chnh -30.0
Normal 40.0
Stresses,50.0
MPa
10.0
20.0

60.0

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 5

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
A4-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
#REF!
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diamete
61.0
mm
Angle between direction of shearing and vertical

0.000
0.090
0.181
0.271
0.362
0.452
0.543
0.633
0.723
0.814
0.904
0.995
1.085
1.176
1.266
1.356
1.447
1.537
1.628
1.718
1.809
1.899
1.989
2.080
2.148

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
2.35
4.93
8.15
10.75
13.86
16.58
19.30
21.47
23.38
25.06
27.40
29.86
32.02
34.23
36.60
38.39
41.03
43.82
45.59
47.84
49.20
50.77
50.01
12.78

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

0.000
6.854
14.401
23.831
31.420
40.513
48.456
56.400
62.755
68.315
73.236
80.090
87.252
93.567
100.036
106.966
112.204
119.904
128.067
133.226
139.808
143.780
148.387
146.163
37.335

T.din hiu chnh


Corr. A cm2

0.000
6.854
14.401
23.831
31.420
40.513
48.456
56.400
62.755
68.315
73.236
80.090
87.252
93.567
100.036
106.966
112.204
119.904
128.067
133.226
139.808
143.780
148.387
146.163
37.335

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

0.000
0.128
0.256
0.384
0.512
0.639
0.767
0.895
1.023
1.151
1.279
1.407
1.535
1.663
1.790
1.918
2.046
2.174
2.302
2.430
2.558
2.686
2.81
2.94
3.04

61.0
Ti trng chnh
Normal force, kN

0.00
9.69
20.37
33.70
44.43
57.29
68.53
79.76
88.75
96.61
103.57
113.26
123.39
132.32
141.47
151.27
158.68
169.57
181.11
188.41
197.72
203.34
209.85
206.71
52.800

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
2.345
4.928
8.154
10.751
13.862
16.581
19.299
21.473
23.376
25.060
27.405
29.856
32.016
34.230
36.601
38.394
41.029
43.822
45.587
47.839
49.198
50.775
50.014
12.775

-4.540
12.492
45

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 6

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - ProjecKHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
A4-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
06-08-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diame
61.0
mm
Angle between direction of shearing and vertical

0.00
4.80
9.20
13.70
18.70
23.00
26.90
32.40
35.87
39.30
42.80
46.70
50.00
53.30
57.60
60.20
64.20
67.90
71.60
74.60
75.50
2.00

0.000
0.123
0.246
0.369
0.492
0.615
0.738
0.861
0.984
1.107
1.230
1.353
1.476
1.600
1.723
1.846
1.969
2.092
2.215
2.338
2.461
2.584

0.000
2.400
4.600
6.850
9.350
11.500
13.450
16.200
17.935
19.650
21.400
23.350
25.000
26.650
28.800
30.100
32.100
33.950
35.800
37.300
37.750
1.000

0.000
4.157
7.967
11.865
16.195
19.919
23.296
28.059
31.064
34.035
37.066
40.443
43.301
46.159
49.883
52.135
55.599
58.803
62.007
64.605
65.385
1.732

0.000
0.107
0.213
0.320
0.426
0.533
0.639
0.746
0.852
0.959
1.066
1.172
1.279
1.385
1.492
1.598
1.705
1.811
1.918
2.025
2.131
2.238

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
0.82
1.57
2.34
3.20
3.94
4.60
5.54
6.14
6.72
7.32
7.99
8.55
9.12
9.85
10.30
10.98
11.62
12.25
12.76
12.92
0.34

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen heig

0.000
1.422
2.726
4.060
5.541
6.816
7.971
9.601
10.629
11.646
12.683
13.839
14.817
15.795
17.069
17.839
19.025
20.121
21.217
22.106
22.373
0.593

-4.540
12.492
30

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

A16-R1

So hieu mau - Sample No. :

Mo Ta - Description: Rhyolite

o sau - Depth, m :

34.6

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.540

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

12.492

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date
Ban au
Initial

Giai oan cat


Shear Stage

Mau th 2

Mau th 3

Second Trial

Third Trial

06-08-'09

06-08-'09

o am - Moisture Content, %
3

Dung trong t - Wet Density, g/cm

Dung trong kho - Dry Density, g/cm3

0.00

0.00

ng suat chnh - Normal stress, MPa

64.1

13.2

ng suat cat - Max. shear stress, MPa

64.1

22.8

Chuyen v ngang - Shear. Displacement, mm

2.55

1.98

45

30

Goc gia hng cat va phng thang ng


o

Angle between direction of shearing and vertical,


Sc khang cat

Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

391
12.2

70.0
ng suat cat - Shear Stress, Mpa

70.0

50.0

40.0

50.0
40.0
30.0
20.0
10.0
0.0

30.0

0.0

Cac 20.0
ng suat chnh 40.0
- Normal Stresses,
60.0MPa

0.0

Cac n20.0
g suat chnh -40.0
Normal Stresses,
60.0 MPa

80.0

80.0
20.0
ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

60.0

60.0

60.0

10.0

40.0

0.0
0.0

Chuyen v1.0
ngang - Shear. 2.0
Disp, mm

Legends:

3.0

20.0

Mu th 1 - The First Trial


Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

0.0

80.0

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 8

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - ProjecKHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
A16-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
06-08-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diame
61.0
mm
Angle between direction of shearing and vertical

0.00
6.00
10.00
15.70
19.10
24.00
28.90
34.40
37.87
40.80
44.70
48.00
51.50
55.80
59.60
64.00
67.30
71.60
73.70
77.10
12.30
4.00

0.000
0.117
0.317
0.551
0.644
0.787
0.914
1.024
1.135
1.255
1.368
1.481
1.575
1.668
1.778
1.872
1.972
2.082
2.189
2.286
2.470
2.560

0.000
3.000
5.000
7.850
9.550
12.000
14.450
17.200
18.935
20.400
22.350
24.000
25.750
27.900
29.800
32.000
33.650
35.800
36.850
38.550
6.150
2.000

0.000
5.196
8.660
13.597
16.541
20.785
25.028
29.791
32.796
35.334
38.711
41.569
44.600
48.324
51.615
55.426
58.284
62.007
63.826
66.771
10.652
3.464

0.000
0.101
0.275
0.477
0.558
0.682
0.792
0.887
0.983
1.086
1.185
1.283
1.364
1.445
1.540
1.621
1.708
1.803
1.896
1.980
2.139
2.217

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
1.03
1.71
2.69
3.27
4.11
4.94
5.89
6.48
6.98
7.65
8.21
8.81
9.55
10.20
10.95
11.51
12.25
12.61
13.19
2.10
0.68

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen heig

0.000
1.778
2.963
4.652
5.660
7.112
8.564
10.194
11.222
12.090
13.246
14.224
15.261
16.535
17.661
18.965
19.943
21.217
21.840
22.847
3.645
1.185

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 9

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
A16-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
#REF!
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diamete
61.0
mm
Angle between direction of shearing and vertical

0.000
0.085
0.170
0.255
0.339
0.424
0.509
0.594
0.679
0.764
0.849
0.933
1.018
1.103
1.188
1.273
1.358
1.442
1.527
1.612
1.697
1.782
1.867
1.952
2.036
2.121
2.206
2.291
2.376
2.461
2.546
2.630

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
1.13
3.17
5.56
7.53
9.12
10.91
12.90
15.04
17.43
19.49
21.84
23.88
26.06
28.36
30.61
32.89
35.11
37.37
39.59
41.92
44.10
46.35
48.60
50.85
53.17
55.38
57.42
59.79
61.99
64.13
0.28

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

0.000
3.290
9.254
16.246
22.004
26.665
31.875
37.701
43.939
50.932
56.964
63.819
69.783
76.158
82.876
89.456
96.106
102.618
109.199
115.712
122.497
128.873
135.453
142.034
148.615
155.401
161.844
167.809
174.732
181.176
187.414
0.819

T.din hiu chnh


Corr. A cm2

0.000
3.290
9.254
16.246
22.004
26.665
31.875
37.701
43.939
50.932
56.964
63.819
69.783
76.158
82.876
89.456
96.106
102.618
109.199
115.712
122.497
128.873
135.453
142.034
148.615
155.401
161.844
167.809
174.732
181.176
187.414
0.819

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

0.000
0.120
0.240
0.360
0.480
0.600
0.720
0.840
0.960
1.080
1.200
1.320
1.440
1.560
1.680
1.800
1.920
2.040
2.160
2.280
2.400
2.520
2.64
2.76
2.88
3.00
3.12
3.24
3.36
3.48
3.60
3.72

61.0
Ti trng chnh
Normal force, kN

0.00
4.65
13.09
22.98
31.12
37.71
45.08
53.32
62.14
72.03
80.56
90.25
98.69
107.70
117.20
126.51
135.91
145.12
154.43
163.64
173.24
182.25
191.56
200.87
210.173
219.771
228.883
237.317
247.109
256.222
265.044
1.159

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
1.126
3.166
5.559
7.529
9.124
10.907
12.901
15.035
17.428
19.492
21.837
23.878
26.059
28.358
30.610
32.885
35.114
37.365
39.594
41.916
44.097
46.349
48.601
50.853
53.175
55.379
57.420
59.789
61.994
64.129
0.280

-4.540
12.492
45

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

B3-R2

So hieu mau - Sample No. :


o sau - Depth, m :

Mo Ta - Description: Shale

46.0-47.0

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.540
12.492

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

Mau th 3

First Trial

Second Trial

Third Trial

11-07-'09

11-07-'09

11-07-'09

o am - Moisture Content, %

Ban au

1.30

1.30

1.30

2.72

2.72

2.72

Dung trong kho - Dry Density, g/cm 3

2.69

2.69

2.69

ng suat chnh - Normal stress, MPa

85.7

11.9

2.2

ng suat cat - Max. shear stress, MPa

49.5

11.9

3.9

Chuyen v ngang - Shear. Displacement, mm

1.61

1.86

0.81

60

45

30

Dung trong t - Wet Density, g/cm

Initial

Giai oan cat


Shear Stage

Goc gia hng cat va phng thang ng


Angle between direction of shearing and vertical,

Sc khang cat

Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

281
4.0

50.0

40.0

50.0
40.0
30.0
20.0
10.0
0.0

30.0

0.0

20.0

40.0

60.0

80.0

100.0

Cac ng suat chnh - Normal Stresses, MPa


20.0

100.0

10.0

0.0
0.0

0.5

1.0

1.5

2.0

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.5

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

60.0

ng suat cat - Shear Stress, Mpa

60.0

80.0

60.0

40.0

20.0

0.0
0.0

20.0

40.0

60.0

80.0

100.0

Cac ng suat chnh - Normal Stresses, MPa

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 10

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - ProjecKHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B3-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diame
61.0
mm
Angle between direction of shearing and vertical

0.00
3.06
5.26
7.23
9.17
10.88
12.07
13.13
12.63
9.83
7.32
5.60

0.000
0.144
0.260
0.404
0.529
0.671
0.788
0.932
1.057
1.194
1.376
1.528

0.000
1.532
2.628
3.615
4.587
5.440
6.037
6.564
6.315
4.917
3.661
2.802

0.000
2.654
4.553
6.261
7.945
9.423
10.456
11.370
10.938
8.517
6.340
4.852

0.000
0.125
0.225
0.350
0.458
0.581
0.683
0.808
0.916
1.034
1.192
1.323

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
0.52
0.90
1.24
1.57
1.86
2.07
2.25
2.16
1.68
1.25
0.96

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen heig

0.000
0.908
1.558
2.142
2.719
3.224
3.578
3.890
3.743
2.914
2.169
1.660

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 11

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B3-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diamete
61.0
mm
Angle between direction of shearing and vertical

0.00
3.54
6.73
10.98
15.41
19.13
22.84
25.86
29.40
31.88
34.01
36.84
39.68
41.98
43.40
46.23
47.65
48.89
49.24
47.57
35.43
2.40

0.000
0.146
0.293
0.439
0.585
0.732
0.878
1.024
1.171
1.317
1.463
1.610
1.756
1.902
2.049
2.195
2.341
2.488
2.634
2.780
2.927
3.073

0.000
2.505
4.760
7.766
10.897
13.528
16.151
18.287
20.792
22.546
24.049
26.053
28.057
29.686
30.688
32.692
33.694
34.571
34.821
33.637
25.051
1.699

0.000
2.505
4.760
7.766
10.897
13.528
16.151
18.287
20.792
22.546
24.049
26.053
28.057
29.686
30.688
32.692
33.694
34.571
34.821
33.637
25.051
1.699

0.000
0.103
0.207
0.310
0.414
0.517
0.621
0.724
0.828
0.931
1.035
1.138
1.242
1.345
1.449
1.552
1.656
1.759
1.863
1.966
2.069
2.173

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
0.86
1.63
2.66
3.73
4.63
5.53
6.26
7.11
7.71
8.23
8.91
9.60
10.16
10.50
11.19
11.53
11.83
11.91
11.51
8.57
0.58

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
0.857
1.629
2.657
3.729
4.629
5.526
6.257
7.115
7.715
8.229
8.915
9.601
10.158
10.501
11.186
11.529
11.829
11.915
11.510
8.572
0.581

-4.540
12.492
45

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 12

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B3-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
11.97
26.33
38.41
53.95
65.67
77.28
89.81
102.92
116.38
128.33
140.28
152.58
165.11
177.53
189.25
197.48
210.65
219.02
229.80
241.77
257.20
264.266
276.115
284.373
289.161
169.475
99.579

0.000
0.129
0.257
0.386
0.514
0.643
0.771
0.900
1.028
1.157
1.286
1.414
1.543
1.671
1.800
1.928
2.057
2.185
2.314
2.443
2.571
2.700
2.83
2.96
3.09
3.21
3.34
3.44

0.000
0.064
0.129
0.193
0.257
0.321
0.386
0.450
0.514
0.578
0.643
0.707
0.771
0.836
0.900
0.964
1.028
1.093
1.157
1.221
1.286
1.350
1.414
1.478
1.543
1.607
1.671
1.719

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
3.55
7.80
11.38
15.99
19.46
22.90
26.61
30.50
34.49
38.03
41.57
45.21
48.93
52.61
56.08
58.52
62.42
64.90
68.10
71.64
76.22
78.31
81.82
84.27
85.69
50.22
29.51

ng sut ct
Shear stress, Mpa

0.000
5.984
13.165
19.203
26.977
32.836
38.638
44.903
51.459
58.189
64.164
70.140
76.290
82.555
88.763
94.623
98.741
105.323
109.512
114.898
120.883
128.602
132.133
138.058
142.187
144.580
84.738
49.789

ng sut
Normal stress, Mpa

0.000
10.365
22.803
33.260
46.725
56.874
66.923
77.775
89.130
100.786
111.136
121.487
132.138
142.990
153.742
163.891
171.024
182.426
189.681
199.010
209.375
222.746
228.861
239.123
246.275
250.421
146.770
86.238

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

61.0

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

29.22
61.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
2.048
4.505
6.571
9.231
11.236
13.221
15.365
17.608
19.911
21.956
24.000
26.105
28.248
30.373
32.378
33.787
36.039
37.473
39.316
41.363
44.005
45.213
47.240
48.653
49.472
28.995
17.037

-4.540
12.492
60

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

BB8-R2

So hieu mau - Sample No. :


o sau - Depth, m :

Mo Ta - Description: Shale

38.0-38.5

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.540
12.492

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

Mau th 3

First Trial

Second Trial

Third Trial

11-07-'09

11-07-'09

11-07-'09

o am - Moisture Content, %

Ban au

5.99

5.99

5.99

2.50

2.50

2.50

Dung trong kho - Dry Density, g/cm 3

2.36

2.36

2.36

ng suat chnh - Normal stress, MPa

99.5

14.6

3.7

ng suat cat - Max. shear stress, MPa

57.5

14.6

6.4

Chuyen v ngang - Shear. Displacement, mm

1.69

2.09

1.69

60

45

30

Dung trong t - Wet Density, g/cm

Initial

Giai oan cat


Shear Stage

Goc gia hng cat va phng thang ng


Angle between direction of shearing and vertical,

Sc khang cat

Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

2734
5.7

60.0

50.0

40.0

60.0
50.0
40.0
30.0
20.0
10.0
0.0
0.0

30.0

20.0

40.0

60.0

80.0

100.0

Cac ng suat chnh - Normal Stresses, MPa


100.0

20.0

10.0

0.0
0.0

0.5

1.0

1.5

2.0

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.5

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

70.0

ng suat cat - Shear Stress, Mpa

70.0

80.0

60.0

40.0

20.0

0.0
0.0

20.0

40.0

60.0

80.0

100.0

Cac ng suat chnh - Normal Stresses, MPa

13

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 14

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - ProjecKHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
BB8-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diame
61.0
mm
Angle between direction of shearing and vertical

0.00
2.15
3.69
5.07
6.43
7.63
9.20
10.62
12.35
13.38
15.12
16.28
17.24
18.98
19.88
20.91
21.75
20.40
16.73
12.87
8.11
4.95

0.000
0.119
0.214
0.333
0.436
0.553
0.649
0.768
0.871
0.984
1.134
1.259
1.400
1.538
1.675
1.812
1.950
2.087
2.225
2.362
2.500
2.637

0.000
1.075
1.843
2.535
3.217
3.816
4.601
5.308
6.177
6.692
7.560
8.139
8.622
9.491
9.941
10.456
10.874
10.198
8.365
6.434
4.054
2.477

0.000
1.861
3.193
4.391
5.572
6.609
7.968
9.194
10.699
11.590
13.095
14.098
14.934
16.438
17.218
18.110
18.834
17.664
14.488
11.145
7.021
4.291

0.000
0.103
0.186
0.288
0.378
0.479
0.562
0.665
0.754
0.852
0.982
1.090
1.213
1.332
1.451
1.570
1.689
1.808
1.927
2.046
2.165
2.284

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
0.37
0.63
0.87
1.10
1.31
1.57
1.82
2.11
2.29
2.59
2.79
2.95
3.25
3.40
3.58
3.72
3.49
2.86
2.20
1.39
0.85

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen heig

0.000
0.637
1.093
1.502
1.907
2.261
2.727
3.146
3.661
3.966
4.481
4.824
5.110
5.625
5.892
6.197
6.445
6.044
4.957
3.813
2.402
1.468

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 15

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
BB8-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diamete
61.0
mm
Angle between direction of shearing and vertical

0.00
7.13
11.64
15.20
19.33
22.90
26.47
30.03
33.41
37.54
40.73
43.74
46.55
49.56
51.43
53.69
55.75
57.63
59.32
60.44
60.07
2.55

0.000
0.156
0.311
0.467
0.622
0.778
0.933
1.089
1.244
1.400
1.555
1.711
1.866
2.022
2.177
2.333
2.488
2.644
2.799
2.955
3.110
3.266

0.000
5.044
8.229
10.751
13.672
16.194
18.715
21.237
23.627
26.547
28.803
30.927
32.918
35.042
36.369
37.962
39.422
40.749
41.944
42.740
42.475
1.801

0.000
5.044
8.229
10.751
13.672
16.194
18.715
21.237
23.627
26.547
28.803
30.927
32.918
35.042
36.369
37.962
39.422
40.749
41.944
42.740
42.475
1.801

0.000
0.110
0.220
0.330
0.440
0.550
0.660
0.770
0.880
0.990
1.100
1.210
1.319
1.429
1.539
1.649
1.759
1.869
1.979
2.089
2.199
2.309

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
1.73
2.82
3.68
4.68
5.54
6.40
7.27
8.08
9.08
9.86
10.58
11.26
11.99
12.44
12.99
13.49
13.94
14.35
14.62
14.53
0.62

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
1.726
2.816
3.679
4.678
5.541
6.404
7.267
8.084
9.084
9.856
10.582
11.264
11.990
12.445
12.990
13.489
13.943
14.352
14.625
14.534
0.616

-4.540
12.492
45

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 16

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
BB8-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
12.97
28.53
41.61
58.46
71.16
83.73
103.75
119.31
134.87
147.84
163.40
176.37
194.53
207.50
225.65
237.32
249.00
263.26
276.23
287.90
296.98
308.652
320.324
326.808
335.886
330.699
107.899

0.000
0.135
0.271
0.406
0.542
0.677
0.813
0.948
1.083
1.219
1.354
1.490
1.625
1.761
1.896
2.032
2.167
2.302
2.438
2.573
2.709
2.844
2.98
3.11
3.25
3.39
3.52
3.62

0.000
0.068
0.135
0.203
0.271
0.339
0.406
0.474
0.542
0.609
0.677
0.745
0.813
0.880
0.948
1.016
1.083
1.151
1.219
1.287
1.354
1.422
1.490
1.557
1.625
1.693
1.761
1.811

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
3.84
8.45
12.33
17.32
21.09
24.81
30.74
35.36
39.97
43.81
48.42
52.27
57.65
61.49
66.87
70.33
73.79
78.01
81.86
85.32
88.01
91.46
94.92
96.84
99.53
98.00
31.97

ng sut ct
Shear stress, Mpa

0.000
6.484
14.265
20.807
29.231
35.580
41.866
51.874
59.655
67.437
73.921
81.702
88.186
97.264
103.749
112.827
118.662
124.498
131.631
138.115
143.951
148.490
154.326
160.162
163.404
167.943
165.349
53.949

ng sut
Normal stress, Mpa

0.000
11.231
24.708
36.039
50.629
61.626
72.515
89.849
103.326
116.804
128.035
141.512
152.743
168.467
179.698
195.421
205.529
215.637
227.992
239.223
249.331
257.193
267.301
277.409
283.024
290.886
286.393
93.443

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

61.0

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

29.22
61.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
2.219
4.881
7.120
10.002
12.175
14.326
17.750
20.413
23.075
25.294
27.957
30.175
33.282
35.500
38.607
40.604
42.600
45.041
47.260
49.257
50.810
52.807
54.804
55.913
57.466
56.579
18.460

-4.540
12.492
60

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

BB9-R3

So hieu mau - Sample No. :


o sau - Depth, m :

Mo Ta - Description: Shale

38.6-39.0

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.540
12.492

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

Mau th 3

First Trial

Second Trial

Third Trial

11-07-'09

11-07-'09

11-07-'09

o am - Moisture Content, %

Ban au

1.17

1.17

1.17

2.65

2.65

2.65

Dung trong kho - Dry Density, g/cm 3

2.62

2.62

2.62

ng suat chnh - Normal stress, MPa

117.6

23.6

4.8

ng suat cat - Max. shear stress, MPa

67.9

23.6

8.2

Chuyen v ngang - Shear. Displacement, mm

1.42

1.75

1.72

60

45

30

Dung trong t - Wet Density, g/cm

Initial

Giai oan cat


Shear Stage

Goc gia hng cat va phng thang ng


Angle between direction of shearing and vertical,

Sc khang cat

Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

272
8.4

80.0
ng suat cat - Shear Stress, Mpa

70.0

60.0

50.0

70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0

40.0

0.0

20.0

40.0

60.0

80.0

100.0 120.0

Cac ng suat chnh - Normal Stresses, MPa


30.0
120.0
20.0

10.0

0.0
0.0

0.5

1.0

1.5

2.0

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.5

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

80.0

100.0
80.0
60.0
40.0
20.0
0.0
0.0

20.0

40.0

60.0

80.0

100.0

120.0

Cac ng suat chnh - Normal Stresses, MPa

17

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 18

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - ProjecKHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
BB9-R3
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diame
61.0
mm
Angle between direction of shearing and vertical

0.00
2.48
4.26
5.86
7.43
8.82
10.63
12.27
14.27
15.46
17.47
18.81
19.92
21.93
22.97
24.16
25.13
26.99
27.80
27.51
14.27
5.72

0.000
0.106
0.191
0.298
0.389
0.494
0.580
0.686
0.778
0.879
1.013
1.124
1.251
1.373
1.496
1.619
1.741
1.864
1.987
2.110
2.232
2.355

0.000
1.242
2.130
2.929
3.717
4.409
5.316
6.133
7.137
7.732
8.735
9.404
9.962
10.966
11.486
12.081
12.564
13.493
13.902
13.754
7.137
2.862

0.000
2.150
3.689
5.073
6.438
7.636
9.207
10.623
12.362
13.392
15.130
16.289
17.255
18.993
19.894
20.925
21.762
23.371
24.079
23.822
12.362
4.958

0.000
0.092
0.166
0.258
0.337
0.428
0.502
0.594
0.674
0.761
0.877
0.973
1.083
1.189
1.296
1.402
1.508
1.614
1.721
1.827
1.933
2.040

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
0.42
0.73
1.00
1.27
1.51
1.82
2.10
2.44
2.65
2.99
3.22
3.41
3.75
3.93
4.13
4.30
4.62
4.76
4.71
2.44
0.98

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen heig

0.000
0.736
1.262
1.736
2.203
2.613
3.150
3.635
4.230
4.582
5.177
5.574
5.904
6.499
6.807
7.160
7.446
7.997
8.239
8.151
4.230
1.696

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 19

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
BB9-R3
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diamete
61.0
mm
Angle between direction of shearing and vertical

0.00
10.53
21.62
32.98
38.80
43.51
47.67
54.32
60.14
66.79
70.95
76.21
80.92
83.97
87.58
91.73
94.78
97.28
97.55
95.89
88.68
3.76

0.000
0.137
0.275
0.412
0.550
0.687
0.825
0.962
1.100
1.237
1.375
1.512
1.650
1.787
1.925
2.062
2.200
2.337
2.475
2.612
2.750
2.887

0.000
7.447
15.285
23.320
27.435
30.767
33.706
38.409
42.525
47.228
50.167
53.891
57.222
59.378
61.925
64.865
67.020
68.784
68.980
67.804
62.709
2.659

0.000
7.447
15.285
23.320
27.435
30.767
33.706
38.409
42.525
47.228
50.167
53.891
57.222
59.378
61.925
64.865
67.020
68.784
68.980
67.804
62.709
2.659

0.000
0.097
0.194
0.292
0.389
0.486
0.583
0.680
0.778
0.875
0.972
1.069
1.167
1.264
1.361
1.458
1.555
1.653
1.750
1.847
1.944
2.041

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
2.55
5.23
7.98
9.39
10.53
11.53
13.14
14.55
16.16
17.17
18.44
19.58
20.32
21.19
22.20
22.93
23.54
23.60
23.20
21.46
0.91

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
2.548
5.230
7.980
9.388
10.528
11.533
13.143
14.551
16.160
17.166
18.440
19.580
20.318
21.189
22.195
22.933
23.536
23.603
23.201
21.458
0.910

-4.540
12.492
45

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 20

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
BB9-R3
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
11-07-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.000
26.955
46.048
61.771
77.495
94.341
101.080
115.680
130.281
142.635
160.605
172.959
187.560
199.914
216.761
233.607
253.823
266.177
271.793
285.270
298.748
307.733
318.964
324.579
338.057
343.672
286.393
93.443

0.000
15.562
26.586
35.664
44.742
54.468
58.359
66.788
75.218
82.350
92.725
99.858
108.288
115.420
125.147
134.873
146.545
153.678
156.920
164.701
172.482
177.669
184.154
187.396
195.177
198.419
165.349
53.949

0.000
0.057
0.113
0.170
0.227
0.284
0.340
0.397
0.454
0.510
0.567
0.624
0.681
0.737
0.794
0.851
0.907
0.964
1.021
1.077
1.134
1.191
1.248
1.304
1.361
1.418
1.474
1.517

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

ng sut ct
Shear stress, Mpa

0.000
0.113
0.227
0.340
0.454
0.567
0.681
0.794
0.907
1.021
1.134
1.248
1.361
1.474
1.588
1.701
1.815
1.928
2.042
2.155
2.268
2.382
2.50
2.61
2.72
2.84
2.95
3.03

ng sut
Normal stress, Mpa

0.00
31.12
53.17
71.33
89.48
108.94
116.72
133.58
150.44
164.70
185.45
199.72
216.58
230.84
250.29
269.75
293.09
307.36
313.84
329.40
344.96
355.34
368.308
374.792
390.354
396.838
330.699
107.899

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

61.0

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

29.22
61.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.00
9.22
15.76
21.14
26.52
32.28
34.59
39.58
44.58
48.81
54.96
59.18
64.18
68.41
74.17
79.93
86.85
91.08
93.00
97.61
102.22
105.30
109.14
111.06
115.68
117.60
98.00
31.97

0.000
5.325
9.097
12.203
15.310
18.638
19.969
22.853
25.738
28.178
31.728
34.169
37.053
39.494
42.822
46.150
50.144
52.585
53.694
56.357
59.019
60.794
63.013
64.123
66.785
67.894
56.579
18.460

-4.540
12.492
60

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

B10-R2

So hieu mau - Sample No. :

Mo Ta - Description: Rhyolite

o sau - Depth, m :

33.0

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.208

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

12.492

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

First Trial

Second Trial

13-01-'09

13-01-'09

o am - Moisture Content, %

0.28

0.28

2.67

2.67

Dung trong kho - Dry Density, g/cm 3

2.67

2.67

ng suat chnh - Normal stress, MPa

41.0

10.6

Giai oan cat

ng suat cat - Max. shear stress, MPa

41.0

18.4

Shear Stage

Chuyen v ngang - Shear. Displacement, mm

1.69

1.67

45

30

Ban au

Dung trong t - Wet Density, g/cm

Initial

Gc ct - Shear plane angle,


Sc khang cat

Goc ma sat trong - Internal Friction Angle

3636

Shear Strength Lc dnh - Cohesion c, MPa

10.5
ng suat cat - Shear Stress, Mpa

45.0
40.0

30.0
25.0

40.0
35.0
30.0
25.0
20.0
15.0
10.0
5.0
0.0
0.0

20.0

10.0

20.0

30.0

40.0

50.0

Cac ng suat chnh - Normal Stresses, MPa

15.0

50.0

10.0
5.0
0.0
0.0

0.5

1.0

1.5

2.0

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.5

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

35.0

45.0

40.0

30.0

20.0

10.0

0.0
0.0

10.0

20.0

30.0

40.0

Cac ng suat chnh - Normal Stresses, MPa

50.0

21

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 22

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B10-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
13-01-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc ct - Shear plane angle, degree
.K mu - Specimen diameter
61.0
mm

0.00
4.00
8.00
13.70
17.10
22.00
26.90
32.40
35.87
28.21
30.73
34.32
37.81
42.56
46.92
51.28
55.45
58.50
61.50
62.24
10.30
2.00

0.000
0.101
0.203
0.304
0.406
0.507
0.609
0.710
0.812
0.913
1.015
1.116
1.218
1.319
1.421
1.522
1.624
1.725
1.827
1.928
2.030
2.131

0.000
2.000
4.000
6.850
8.550
11.000
13.450
16.200
17.935
14.106
15.366
17.159
18.904
21.280
23.461
25.642
27.726
29.250
30.750
31.120
5.150
1.000

0.000
3.464
6.928
11.865
14.809
19.053
23.296
28.059
31.064
24.431
26.615
29.721
32.743
36.858
40.635
44.413
48.023
50.662
53.261
53.901
8.920
1.732

0.000
0.088
0.176
0.264
0.352
0.439
0.527
0.615
0.703
0.791
0.879
0.967
1.055
1.143
1.230
1.318
1.406
1.494
1.582
1.670
1.758
1.846

29.2246657
29.2246656
29.2246656
29.2246656
29.2246656
29.2246655
29.2246655
29.2246655
29.2246654
29.2246654
29.2246654
29.2246654
29.2246653
29.2246653
29.2246653
29.2246653
29.2246652
29.2246652
29.2246652
29.2246652
29.2246651
29.2246651

0.00
0.68
1.37
2.34
2.93
3.76
4.60
5.54
6.14
4.83
5.26
5.87
6.47
7.28
8.03
8.77
9.49
10.01
10.52
10.65
1.76
0.34

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

58.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
1.185
2.371
4.060
5.067
6.519
7.971
9.601
10.629
8.360
9.107
10.170
11.204
12.612
13.905
15.197
16.433
17.336
18.225
18.444
3.052
0.593

-4.208
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Ph lc - Appendix 7.2
Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department
T - Sheet 23

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B10-R2
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
#REF!
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc ct - Shear plane angle, degree
.K mu - Specimen diameter
61.0
mm

0.000
0.081
0.161
0.242
0.323
0.403
0.484
0.565
0.645
0.726
0.806
0.887
0.968
1.048
1.129
1.210
1.290
1.371
1.452
1.532
1.613
1.694
1.774
1.855
1.915

29.2246657
29.2246656
29.2246656
29.2246656
29.2246656
29.2246655
29.2246655
29.2246655
29.2246655
29.2246654
29.2246654
29.2246654
29.2246654
29.2246653
29.2246653
29.2246653
29.2246653
29.2246652
29.2246652
29.2246652
29.2246652
29.2246651
29.2246651
29.2246651
29.2246651

0.00
2.09
4.39
7.26
9.57
12.34
14.76
17.18
19.11
20.08
22.31
24.39
26.58
28.50
30.47
32.58
34.18
36.52
39.01
40.58
40.93
40.96
39.76
34.84
11.37

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

0.000
6.101
12.819
21.213
27.969
36.062
43.134
50.205
55.861
58.680
65.191
71.293
77.668
83.289
89.048
95.217
99.879
106.734
114.000
118.592
119.620
119.690
116.194
101.823
33.234

T.din hiu chnh


Corr. A cm2

0.000
6.101
12.819
21.213
27.969
36.062
43.134
50.205
55.861
58.680
65.191
71.293
77.668
83.289
89.048
95.217
99.879
106.734
114.000
118.592
119.620
119.690
116.194
101.823
33.234

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

0.000
0.114
0.228
0.342
0.456
0.570
0.684
0.798
0.912
1.026
1.140
1.255
1.369
1.483
1.597
1.711
1.825
1.939
2.053
2.167
2.281
2.395
2.51
2.62
2.71

62.0
Ti trng chnh
Normal force, kN

0.00
8.63
18.13
30.00
39.55
51.00
61.00
71.00
79.00
82.99
92.19
100.82
109.84
117.79
125.93
134.66
141.25
150.94
161.22
167.71
169.17
169.27
164.32
144.00
47.000

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
2.088
4.386
7.259
9.570
12.340
14.759
17.179
19.114
20.079
22.307
24.395
26.576
28.500
30.470
32.581
34.176
36.522
39.008
40.579
40.931
40.955
39.759
34.842
11.372

-4.208
12.492
45

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

B14-R1

So hieu mau - Sample No. :

Mo Ta - Description: Rhyolite

o sau - Depth, m :

16.3

He so ch.v ngang - Hor.disp.trans. Factor, mm/V

-4.540

Chieu cao mau - Initial Height, mm :

61.0

He so cam bien o lc - Loadcell Factor, kN/Mv

12.492

ng knh mau - Diameter, mm :

61.0

Trng thi - State: Bo ha - Satutated

Mau th - Specimen
Ngay TN - Tested Date
Ban au
Initial

Giai oan cat


Shear Stage

Mau th 2

Mau th 3

Second Trial

Third Trial

06-08-'09

06-08-'09

o am - Moisture Content, %
3

Dung trong t - Wet Density, g/cm

Dung trong kho - Dry Density, g/cm3

0.00

0.00

ng suat chnh - Normal stress, MPa

43.5

13.4

ng suat cat - Max. shear stress, MPa

43.5

23.2

Chuyen v ngang - Shear. Displacement, mm

2.45

1.98

45

30

Goc gia hng cat va phng thang ng


o

Angle between direction of shearing and vertical,


Sc khang cat

Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

3357
14.2

50.0
ng suat cat - Shear Stress, Mpa

50.0

45.0

35.0
30.0

30.0
20.0
10.0

25.0
0.0
20.0

0.0

Ca10.0
c ng suat chnh
MPa
20.0 - Normal
30.0Stresses,40.0

0.0

Cac10.0
ng suat chnh
MPa
20.0 - Normal
30.0Stresses,
40.0

50.0

50.0
15.0
ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

40.0

40.0

40.0

10.0
5.0

30.0

0.0
0.0

Chuyen v1.0
ngang - Shear. 2.0
Disp, mm

Legends:
Mu th 1 - The First Trial

3.0

20.0

10.0

Mu th 2 - The Second Trial


Mu th 3 - The Third Trial

0.0

50.0

24

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 25

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - ProjecKHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B14-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
06-08-'09
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diame
61.0
mm
Angle between direction of shearing and vertical

3.30
7.30
11.30
17.00
20.40
25.30
30.20
35.70
39.17
42.10
46.00
49.30
52.80
57.10
60.90
65.30
68.60
72.90
75.00
78.40
13.60
5.30

0.000
0.117
0.317
0.551
0.644
0.787
0.914
1.024
1.135
1.255
1.368
1.481
1.575
1.668
1.778
1.872
1.972
2.082
2.189
2.286
2.470
2.560

1.649
3.649
5.649
8.499
10.199
12.649
15.099
17.849
19.584
21.049
22.999
24.649
26.399
28.549
30.449
32.649
34.299
36.449
37.499
39.199
6.799
2.649

2.856
6.321
9.785
14.721
17.665
21.909
26.153
30.916
33.921
36.458
39.836
42.694
45.725
49.449
52.740
56.550
59.408
63.132
64.950
67.895
11.777
4.589

0.000
0.101
0.275
0.477
0.558
0.682
0.792
0.887
0.983
1.086
1.185
1.283
1.364
1.445
1.540
1.621
1.708
1.803
1.896
1.980
2.139
2.217

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.56
1.25
1.93
2.91
3.49
4.33
5.17
6.11
6.70
7.20
7.87
8.43
9.03
9.77
10.42
11.17
11.74
12.47
12.83
13.41
2.33
0.91

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

T.din hiu chnh


Corr. A cm2

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

61.0
Ti trng chnh
Normal force, kN

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen heig

0.977
2.163
3.348
5.037
6.045
7.497
8.949
10.579
11.607
12.475
13.631
14.609
15.646
16.920
18.046
19.350
20.328
21.602
22.225
23.232
4.030
1.570

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 26

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
B14-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
#REF!
H s cm bin lc - Loadcell Factor, kG/mV
cm2
Tit din - Original area
29.22
Gc gia phng ct v chiu thng ng, degree
.K mu - Specimen diamete
61.0
mm
Angle between direction of shearing and vertical

0.000
0.123
0.245
0.368
0.491
0.613
0.736
0.859
0.981
1.104
1.227
1.349
1.472
1.595
1.717
1.840
1.963
2.086
2.208
2.331
2.454
2.576
2.699

29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247
29.2247

0.00
0.82
2.81
5.28
7.48
10.06
12.31
14.50
16.89
19.21
21.34
23.53
25.87
28.12
30.00
32.35
34.67
36.80
39.17
41.24
43.46
43.37
2.65

ng sut ct
Shear stress, Mpa

ng sut
Normal stress,
Mpa

0.000
2.399
8.226
15.424
21.867
29.408
35.989
42.364
49.355
56.142
62.380
68.755
75.610
82.191
87.674
94.529
101.316
107.554
114.478
120.510
127.022
126.748
7.746

T.din hiu chnh


Corr. A cm2

0.000
2.399
8.226
15.424
21.867
29.408
35.989
42.364
49.355
56.142
62.380
68.755
75.610
82.191
87.674
94.529
101.316
107.554
114.478
120.510
127.022
126.748
7.746

C.V ct
Shear dis, mm

mm
Ti trng ct
Shear force, kN

0.000
0.173
0.347
0.520
0.694
0.867
1.041
1.214
1.388
1.561
1.735
1.908
2.082
2.255
2.429
2.602
2.776
2.949
3.123
3.296
3.470
3.643
3.82

61.0
Ti trng chnh
Normal force, kN

0.00
3.39
11.63
21.81
30.92
41.59
50.90
59.91
69.80
79.40
88.22
97.23
106.93
116.24
123.99
133.68
143.28
152.10
161.90
170.43
179.64
179.25
10.95

C.V ng
Vertical dis,mm

Ti trng ng
Vertical force, kN

C.cao mu - Specimen height

0.000
0.821
2.815
5.278
7.482
10.063
12.314
14.496
16.888
19.210
21.345
23.526
25.872
28.124
30.000
32.346
34.668
36.803
39.172
41.236
43.464
43.370
2.650

-4.540
12.492
45

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

D1-R1

So hieu mau - Sample No. :

Mo Ta - Description: Shale

o sau - Depth, m :

37.1

He so ch.v ngang - Hor.disp.trans. Factor, mm/V :

-4.540

Chieu cao mau - Initial Height, mm :

53.0

He so cam bien o lc - Loadcell Factor, kN/Mv :

12.492

ng knh mau - Diameter, mm :

50.0

Trng thi - State: Bo ha - Saturated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

Mau th 3

First Trial

Second Trial

Third Trial

08-06-'09

08-06-'09

08-06-'09

o am - Moisture Content, %

Ban au

3.99

3.99

3.99

2.62

2.62

2.62

Dung trong kho - Dry Density, g/cm 3

2.52

2.52

2.52

ng suat chnh - Normal stress, MPa

109.3

14.3

8.4

ng suat cat - Max. shear stress, MPa

63.1

14.3

14.6

Chuyen v ngang - Shear. Displacement, mm


Goc gia hng cat va phng thang ng

0.68

0.97

1.31

60

45

30

100.0

150.0

Dung trong t - Wet Density, g/cm

Initial

Giai oan cat


Shear Stage

Angle between direction of shearing and vertical,

Sc khang cat Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

2621
8.9

60.0

50.0

40.0

60.0
50.0
40.0
30.0
20.0
10.0
0.0
0.0

50.0

Cac ng suat chnh - Normal Stresses, MPa

30.0
120.0

20.0

10.0

0.0
0.0

0.5

1.0

1.5

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.0

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

70.0

ng suat cat - Shear Stress, Mpa

70.0

100.0
80.0
60.0
40.0
20.0
0.0
0.0

20.0

40.0

60.0

80.0

100.0 120.0

Cac ng suat chnh - Normal Stresses, MPa

27

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 28

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
D1-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
08-06-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
3.70
6.60
9.80
13.20
16.97
21.33
25.79
30.34
33.15
3.49

0.000
0.130
0.280
0.407
0.566
0.750
0.912
1.099
1.286
1.510
1.700

0.000
1.850
3.300
4.900
6.600
8.483
10.664
12.893
15.172
16.577
1.745

0.000
3.204
5.716
8.487
11.432
14.693
18.470
22.332
26.278
28.712
3.023

0.000
0.113
0.242
0.353
0.490
0.649
0.790
0.952
1.114
1.307
1.472

19.6349541
19.6349541
19.6349540
19.6349540
19.6349540
19.6349539
19.6349539
19.6349538
19.6349538
19.6349538
19.6349537

0.00
0.94
1.68
2.50
3.36
4.32
5.43
6.57
7.73
8.44
0.89

ng sut ct
Shear stress, Mpa

ng sut
Normal stress, Mpa

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

53.0

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

19.63
50.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
1.632
2.911
4.322
5.822
7.483
9.407
11.373
13.383
14.623
1.539

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 29

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
D1-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
08-06-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
0.75
2.57
4.81
6.82
9.18
11.23
13.22
15.40
17.52
19.46
21.45
23.59
25.64
27.35
29.49
31.61
33.56
35.72
37.60
39.63
39.55
2.417

0.000
0.068
0.136
0.205
0.273
0.341
0.409
0.478
0.546
0.614
0.682
0.751
0.819
0.887
0.955
1.024
1.092
1.160
1.228
1.297
1.365
1.433
1.50

0.000
0.529
1.815
3.403
4.824
6.488
7.940
9.346
10.889
12.386
13.762
15.169
16.681
18.133
19.343
20.855
22.352
23.728
25.256
26.587
28.023
27.963
1.709

0.000
0.529
1.815
3.403
4.824
6.488
7.940
9.346
10.889
12.386
13.762
15.169
16.681
18.133
19.343
20.855
22.352
23.728
25.256
26.587
28.023
27.963
1.709

0.000
0.048
0.097
0.145
0.193
0.241
0.290
0.338
0.386
0.434
0.483
0.531
0.579
0.627
0.676
0.724
0.772
0.820
0.869
0.917
0.965
1.013
1.062

19.6349541
19.6349541
19.6349541
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539
19.6349538
19.6349538
19.6349538

0.00
0.27
0.92
1.73
2.46
3.30
4.04
4.76
5.55
6.31
7.01
7.73
8.50
9.24
9.85
10.62
11.38
12.08
12.86
13.54
14.27
14.24
0.87

ng sut ct
Shear stress, Mpa

ng sut
Normal stress, Mpa

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

53.0

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

19.63
50.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
0.270
0.924
1.733
2.457
3.304
4.044
4.760
5.546
6.308
7.009
7.725
8.496
9.235
9.851
10.621
11.384
12.085
12.863
13.541
14.272
14.241
0.870

-4.540
12.492
45

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

7.2ndix 7.2
T - Sheet 30

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
D1-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
08-06-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.000
4.108
10.270
18.590
28.449
39.131
50.325
59.980
70.252
80.625
90.587
96.544
106.609
116.162
124.685
133.209
142.351
151.800
161.352
171.622
183.023
192.472
197.196
200.688
204.283
209.624
214.656
10.475

0.000
2.372
5.929
10.733
16.425
22.592
29.055
34.629
40.560
46.549
52.300
55.740
61.551
67.066
71.987
76.909
82.186
87.642
93.157
99.086
105.668
111.124
113.851
115.867
117.943
121.027
123.932
6.048

0.000
0.026
0.053
0.079
0.105
0.132
0.158
0.184
0.210
0.237
0.263
0.289
0.316
0.342
0.368
0.395
0.421
0.447
0.473
0.500
0.526
0.552
0.579
0.605
0.631
0.658
0.684
0.710

ng sut ct
Shear stress, Mpa

0.000
0.053
0.105
0.158
0.210
0.263
0.316
0.368
0.421
0.473
0.526
0.579
0.631
0.684
0.736
0.789
0.842
0.894
0.947
1.000
1.052
1.105
1.16
1.21
1.26
1.32
1.37
1.42

ng sut
Normal stress, Mpa

0.00
4.74
11.86
21.47
32.85
45.18
58.11
69.26
81.12
93.10
104.60
111.48
123.10
134.13
143.97
153.82
164.37
175.28
186.31
198.17
211.34
222.25
227.70
231.73
235.886
242.053
247.864
12.096

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

53.0

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

19.63
50.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

19.6349541
19.6349541
19.6349541
19.6349541
19.6349541
19.6349541
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349540
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539
19.6349539

0.00
2.09
5.23
9.47
14.49
19.93
25.63
30.55
35.78
41.06
46.14
49.17
54.30
59.16
63.50
67.84
72.50
77.31
82.18
87.41
93.21
98.03
100.43
102.21
104.04
106.76
109.32
5.34

0.000
1.208
3.020
5.466
8.365
11.506
14.798
17.637
20.657
23.707
26.636
28.388
31.347
34.156
36.663
39.169
41.857
44.636
47.444
50.464
53.816
56.595
57.984
59.011
60.068
61.638
63.118
3.080

-4.540
12.492
60

Phu luc - Appendix: 7.2

Cng ty C phn TVTK Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet:

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cong trnh:

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

Project:

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

D3-R1

So hieu mau - Sample No. :

Mo Ta - Description: Shale

o sau - Depth, m :

29.7

He so ch.v ngang - Hor.disp.trans. Factor, mm/V :

-4.540

Chieu cao mau - Initial Height, mm :

62.0

He so cam bien o lc - Loadcell Factor, kN/Mv :

12.492

ng knh mau - Diameter, mm :

61.5

Trng thi - State: Bo ha - Saturated

Mau th - Specimen
Ngay TN - Tested Date

Mau th 1

Mau th 2

Mau th 3

First Trial

Second Trial

Third Trial

13-01-'09

13-01-'09

13-01-'09

o am - Moisture Content, %

Ban au

0.80

0.80

0.80

2.71

2.71

2.71

Dung trong kho - Dry Density, g/cm 3

2.68

2.68

2.68

ng suat chnh - Normal stress, MPa

58.1

23.0

3.2

ng suat cat - Max. shear stress, MPa

33.6

23.0

5.5

Chuyen v ngang - Shear. Displacement, mm


Goc gia hng cat va phng thang ng

1.81

1.86

1.63

60

45

30

Dung trong t - Wet Density, g/cm

Initial

Giai oan cat


Shear Stage

Angle between direction of shearing and vertical,

Sc khang cat Goc ma sat trong - Internal Friction Angle


Shear Strength Lc dnh - Cohesion c, MPa

2557
7.0
ng suat cat - Shear Stress, Mpa

40.0

30.0

25.0

35.0
30.0
25.0
20.0
15.0
10.0
5.0
0.0

20.0

0.0

20.0

40.0

60.0

80.0

Cac ng suat chnh - Normal Stresses, MPa


15.0
60.0
10.0

5.0

0.0
0.0

0.5

1.0

1.5

2.0

Chuyen v ngang - Shear. Disp, mm

Legends:
Mu th 1 - The First Trial
Mu th 2 - The Second Trial
Mu th 3 - The Third Trial

2.5

ng suat cat - Shear Stress, MPa

ng suat cat - Shear Stress, MPa

35.0

40.0

50.0
40.0
30.0
20.0
10.0
0.0
0.0

10.0

20.0

30.0

40.0

50.0

Cac ng suat chnh - Normal Stresses, MPa

60.0

31

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

Ph lc - Appendix 7.2
T - Sheet 32

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
D3-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
13-01-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
1.01
2.03
3.47
4.34
5.58
6.82
8.22
9.10
9.84
10.83
11.67
12.55
13.64
14.61
15.72
16.56
17.65
18.18
19.04
2.61
0.51

0.000
0.104
0.268
0.459
0.535
0.652
0.756
0.846
0.937
1.035
1.128
1.220
1.297
1.373
1.463
1.540
1.622
1.712
1.799
1.879
2.029
2.103

0.000
0.507
1.014
1.737
2.168
2.790
3.411
4.108
4.548
4.920
5.414
5.833
6.276
6.822
7.304
7.861
8.280
8.825
9.091
9.522
1.306
0.254

0.000
0.878
1.757
3.009
3.755
4.832
5.908
7.116
7.878
8.521
9.378
10.102
10.871
11.816
12.650
13.616
14.341
15.286
15.747
16.493
2.262
0.439

0.000
0.090
0.232
0.397
0.463
0.565
0.655
0.733
0.811
0.896
0.977
1.057
1.123
1.189
1.267
1.333
1.404
1.483
1.558
1.627
1.757
1.821

30.1907054
30.1907054
30.1907053
30.1907053
30.1907053
30.1907052
30.1907052
30.1907052
30.1907051
30.1907051
30.1907051
30.1907051
30.1907051
30.1907050
30.1907050
30.1907050
30.1907050
30.1907049
30.1907049
30.1907049
30.1907049
30.1907048

0.00
0.17
0.34
0.58
0.72
0.92
1.13
1.36
1.51
1.63
1.79
1.93
2.08
2.26
2.42
2.60
2.74
2.92
3.01
3.15
0.43
0.08

ng sut ct
Shear stress, Mpa

ng sut
Normal stress, Mpa

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

61.5

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

30.19
62.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
0.291
0.582
0.997
1.244
1.600
1.957
2.357
2.609
2.822
3.106
3.346
3.601
3.914
4.190
4.510
4.750
5.063
5.216
5.463
0.749
0.145

-4.540
12.492
30

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

Ph lc - Appendix 7.2
T - Sheet 33

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
D3-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
13-01-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
1.85
6.35
11.90
16.87
22.69
27.77
32.69
38.09
43.32
48.14
53.06
58.35
63.42
67.65
72.94
78.18
82.99
88.34
92.99
98.02
97.81
5.977

0.000
0.131
0.262
0.394
0.525
0.656
0.787
0.918
1.050
1.181
1.312
1.443
1.574
1.706
1.837
1.968
2.099
2.230
2.362
2.493
2.624
2.755
2.89

0.000
1.309
4.488
8.416
11.931
16.046
19.637
23.115
26.930
30.633
34.037
37.516
41.256
44.847
47.839
51.579
55.282
58.686
62.464
65.755
69.309
69.159
4.227

0.000
1.309
4.488
8.416
11.931
16.046
19.637
23.115
26.930
30.633
34.037
37.516
41.256
44.847
47.839
51.579
55.282
58.686
62.464
65.755
69.309
69.159
4.227

0.000
0.093
0.186
0.278
0.371
0.464
0.557
0.649
0.742
0.835
0.928
1.021
1.113
1.206
1.299
1.392
1.484
1.577
1.670
1.763
1.856
1.948
2.041

30.1907054
30.1907054
30.1907053
30.1907053
30.1907053
30.1907053
30.1907052
30.1907052
30.1907052
30.1907051
30.1907051
30.1907051
30.1907051
30.1907050
30.1907050
30.1907050
30.1907049
30.1907049
30.1907049
30.1907049
30.1907048
30.1907048
30.1907048

0.00
0.43
1.49
2.79
3.95
5.31
6.50
7.66
8.92
10.15
11.27
12.43
13.67
14.85
15.85
17.08
18.31
19.44
20.69
21.78
22.96
22.91
1.40

ng sut ct
Shear stress, Mpa

ng sut
Normal stress, Mpa

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

61.5

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

30.19
62.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
0.434
1.487
2.788
3.952
5.315
6.504
7.656
8.920
10.147
11.274
12.426
13.665
14.855
15.845
17.085
18.311
19.438
20.690
21.780
22.957
22.907
1.400

-4.540
12.492
45

Cng ty C Phn T vn Thit K Cng K Thut Bin - PortCoast Consultant Corporation


Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

Ph lc - Appendix 7.2
T - Sheet 34

TH NGHIEM CAT TRC TIEP - DIRECT SHEAR TEST FOR INTACT CORE ROCK
Cng trnh - Project

KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH
S hiu mu - Sample No
D3-R1
H.s c. bin ch.v - Disp.Trans.Factor, mm/V
Ngy TN - Testing Date
13-01-'09
H s cm bin lc - Loadcell Factor, kG/mV

0.00
3.88
9.69
17.55
26.85
36.94
47.50
56.61
66.31
76.10
85.50
91.13
100.63
109.64
117.69
125.73
134.36
143.28
152.30
161.99
172.75
181.67
186.13
189.43
192.820
197.862
202.612
9.888

0.000
0.139
0.278
0.417
0.556
0.695
0.834
0.973
1.112
1.251
1.390
1.529
1.668
1.807
1.946
2.085
2.224
2.363
2.502
2.641
2.780
2.919
3.06
3.20
3.34
3.48
3.61
3.75

0.000
0.070
0.139
0.209
0.278
0.348
0.417
0.487
0.556
0.626
0.695
0.765
0.834
0.904
0.973
1.043
1.112
1.182
1.251
1.321
1.390
1.460
1.529
1.599
1.668
1.738
1.807
1.877

30.1907054
30.1907054
30.1907054
30.1907053
30.1907053
30.1907053
30.1907053
30.1907053
30.1907052
30.1907052
30.1907052
30.1907052
30.1907051
30.1907051
30.1907051
30.1907051
30.1907051
30.1907050
30.1907050
30.1907050
30.1907050
30.1907049
30.1907049
30.1907049
30.1907049
30.1907049
30.1907048
30.1907048

0.00
1.11
2.78
5.03
7.70
10.60
13.63
16.24
19.02
21.83
24.53
26.14
28.86
31.45
33.76
36.07
38.54
41.10
43.69
46.47
49.55
52.11
53.39
54.34
55.31
56.76
58.12
2.84

ng sut ct
Shear stress, Mpa

0.000
1.939
4.847
8.773
13.427
18.468
23.751
28.307
33.155
38.050
42.752
45.563
50.313
54.822
58.844
62.867
67.182
71.641
76.149
80.996
86.376
90.836
93.065
94.714
96.410
98.931
101.306
4.944

ng sut
Normal stress, Mpa

0.000
3.358
8.395
15.196
23.256
31.987
41.137
49.030
57.426
65.905
74.048
78.918
87.145
94.954
101.921
108.890
116.362
124.086
131.894
140.289
149.608
157.333
161.194
164.049
166.987
171.354
175.467
8.563

T.din hiu chnh


2
Corr. A cm

mm

Gc gia phng ct v chiu thng ng, degree


Angle between direction of shearing and vertical

C.V ct
Shear dis, mm

61.5

Ti trng ct
Shear force, kN

C.cao mu - Specimen height

Ti trng chnh
Normal force, kN

cm2
mm

C.V ng
Vertical dis,mm

30.19
62.0

Ti trng ng
Vertical force, kN

Tit din - Original area


.K mu - Specimen diameter

0.000
0.642
1.605
2.906
4.447
6.117
7.867
9.376
10.982
12.603
14.161
15.092
16.665
18.159
19.491
20.823
22.252
23.730
25.223
26.828
28.610
30.087
30.826
31.372
31.934
32.769
33.555
1.638

-4.540
12.492
60

APPENDIX 7.3: UNCONSOLIDATED UNDRAINED TRIXIAL


COMPRESSION TEST (UU) FOR ROCK RESULTS
PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Phu luc - Appendix: 7.3


Cng ty C phn T Vn Thit K Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet 1

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM BA TRC CA


SUMMARY OF UU TEST RESULT FOR INTACT CORE ROCK
Cng trnh: KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
Project:

STT
No

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

Gc ma st trong Internal Friction Angle Lc dnh - Cohesion c


(MPa)

S hiu mu
Sample
name

su Depth
(m)

Ngy th nghim
Test date

22-07-09

5537

12.88

L2a

38.5-38.6

Lp
Layer

A4

A16

31.70

22-07-09

6350

15.61

L2a

B3

46.2-46.6

22-07-10

4240

14.94

6b

B16

23.6-24.0

04-06-09

5407

25.00

L2a

04-06-09

5540

9.22

6b

22-07-10

3847

21.12

6b

22-07-10

5537

12.88

6b

22-07-10

6185

3.99

6b

38.80

9.80
5

D3

BB8

33.60
23.6-24.0

L3

LL8

18.2-18.8
51.5-51.6
55.50
46.4-66.6

Phu luc - Appendix: 7.3


Cng ty C phn T Vn Thit K Cng - K thut Bin - PortCoast Consultant Corporation

T - Sheet 2

Phng a K Thut & Kim nh Cng Trnh - Geotechnical Engineering & Quality Testing Department

BNG TNG HP KT QU TH NGHIM BA TRC CA


SUMMARY OF UU TEST RESULT FOR INTACT CORE ROCK
Cng trnh: KHU LIN HP GANG THP & CNG SN DNG FORMOSA H TNH
Project:

STT
No

THE INTERGRATED STELL MILL & SON DUONG PORT FORMOSA HA TINH

Gc ma st trong Internal Friction Angle Lc dnh - Cohesion c


(MPa)

S hiu mu
Sample
name

su Depth
(m)

Ngy th nghim
Test date

Lp
Layer

A4

38.5-38.8

22-07-09

5537

12.88

L2a

D3

23.6-24.0

04-06-09

5540

9.22

6a

LL8

66.4-66.6

22-07-10

6185

3.99

6a

B3

46.2-46.6

22-07-10

4240

14.94

6b

BB8

18.2-18.8

22-07-10

3847

21.12

6b

L3

51.4-51.7

22-07-10

5537

12.88

6b

A16

31.70

22-07-09

6350

15.61

L2a

B16

23.6-24.0

04-06-09

5407

25.00

L2a

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: NGHI SON
Location : Vietnam

Date : 22/07/2009
Tested by : Mr.Opas C.
Checked by : Mr.Patara Kalayasri

Sample Description: Rock core

Sample Delivery : 25/07/2009 by Client

SAMPLE PROPERTIES
Weigh
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

A4
5.40
22.90

Length Conf. Pressure Axial Load

Depth(m) :
529.50

573.20

38.5 - 38.8

606.40
Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

A4-1

6.99

1.00

197.3

86.15

A4-2

9.48

2.00

259.8

113.44

A4-3

5.56

4.00

275.8

120.43

From Graph
m

10.29

82.66

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

12.88

55.37

Linear Strength Envelop from Triaxial Test

Major Principle Stress (MPa)

140
120
100
80

y = 10.2922x + 82.6558
R2 = 0.7534

60
40
20
0
0.00

0.50

1.00

1.50

2.00
2.50
3.00
Minor Principal Stress (MPa)

3.50

4.00

4.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

12.88
55.37

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-113/Triaxial_Compression_Test

A4

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: NGHI SON
Location : Vietnam

Date : 22/07/2009
Tested by : Mr.Opas C.
Checked by : Mr.Patara Kalayasri

Sample Description: Rock core

Sample Delivery : 25/07/2009 by Client

SAMPLE PROPERTIES
Weigh
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

A16 Port
5.25
21.65

Length Conf. Pressure Axial Load

Depth(m):

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

A16-1

6.33

1.00

326

150.59

A16-2

6.21

4.00

443.1

204.69

31.7

From Graph
m

18.03

132.6

573.20
529.50
606.40

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

15.61

63.50

Linear Strength Envelop from Triaxial Test

Major Principle Stress (MPa)

250

200

150

100

y = 18.03130x + 132.56320
R2 = 1.00000

50

0
0.00

0.50

1.00

1.50

2.00
2.50
3.00
Minor Principal Stress (MPa)

3.50

4.00

4.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

15.61
63.50

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-113/Triaxial_Compression_Test

A16Port

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: NGHI SON
Location : Vietnam

Date : 22/07/2009
Tested by : Mr.Opas C.
Checked by : Mr.Patara Kalayasri

Sample Description: Rock core

Sample Delivery : 25/07/2009 by Client

SAMPLE PROPERTIES
Weigh
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

B3D
5.47
23.50

Length Conf. Pressure Axial Load

Depth(m) : 46.2 - 46.6

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

B3D-1

9.50

1.00

170.9

72.72

B3D-2

5.63

2.00

183.8

78.21

B3D-3

5.28

4.00

207.3

88.21

From Graph
m

5.14

67.72

573.20
529.50
606.40

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

14.94

42.40

Linear Strength Envelop from Triaxial Test


100

Major Principle Stress (MPa)

90
80
70
60

y = 5.1399x + 67.7239
R2 = 0.9994

50
40
30
20
10
0
0.00

0.50

1.00

1.50

2.00
2.50
3.00
Minor Principal Stress (MPa)

3.50

4.00

4.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

14.94
42.40

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-113/Triaxial_Compression_Test

B3D

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: Steel Mill and Port Formosa Hatinh
Location : Vietnam

Date : 4/06/2009
Tested by : Mr.Opas C.
Checked by : Dr.Pitthaya Jamsawang

Sample Description: Rock core

Sample Delivery : 25/05/2009 by Client

SAMPLE PROPERTIES
Weigh
Dimension of Sample: B16
diameter (cm) =
X-section area (sq.cm) =
Sample

Depth(m) :

23.6 - 24.0

573.20
529.50
606.40

5.03
19.87

Length Conf. Pressure Axial Load

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

B16-1

10.42

1.00

328.7

165.41

B16-2

9.88

2.00

337.4

169.79

B16-3

10.29

3.00

366.5

184.44

From Graph
m

9.51

154.2

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

25.00

54.07

Linear Strength Envelop from Triaxial Test


200

Major Principle Stress (MPa)

180
160
140

y = 9.5112x + 154.1924
R2 = 0.9115

120
100
80
60
40
20
0
0.00

0.50

1.00

1.50
2.00
Minor Principal Stress (MPa)

2.50

3.00

3.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

25.00
54.07

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-083/Triaxial_Compression_Test1

B6

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: Steel Mill and Port Formosa Hatinh
Location : Vietnam

Date : 4/06/2009
Tested by : Mr.Opas C.
Checked by : Mr.Pitthaya Jamsawang

Sample Description: Rock core

Sample Delivery : 25/05/2009 by Client

SAMPLE PROPERTIES
Depth(m) : 23.6 - 24.0
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

573.20
5.50
23.76

Length Conf. Pressure Axial Load

Weigh

529.50
606.40

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

D3-1

9.45

1.00

164

69.03

D3-2

8.32

2.00

192

80.81

D3-3

10.43

3.00

213

89.65

From Graph
m

10.31

59.21

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

9.22

55.40

Linear Strength Envelop from Triaxial Test


100

Major Principle Stress (MPa)

90
80
70
60
50
40

y = 10.3122x + 59.2074
R2 = 0.9932

30
20
10
0
0.00

0.50

1.00

1.50
2.00
Minor Principal Stress (MPa)

2.50

3.00

3.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

9.22
55.40

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-083/Triaxial_Compression_Test1

D3

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: NGHI SON
Location : Vietnam

Date : 22/07/2009
Tested by : Mr.Opas C.
Checked by : Mr.Patara Kalayasri

Sample Description: Rock core

Sample Delivery : 25/07/2009 by Client

SAMPLE PROPERTIES
Weigh
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

BB8
5.28
21.90

Length Conf. Pressure Axial Load

Depth(m) :

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

BB8-1

5.65

1.00

201

91.80

BB8-2

5.12

4.00

229.2

104.68

573.20
529.50
606.40

18.2 - 18.8

From Graph
m

4.29

87.51

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

21.12

38.47

Linear Strength Envelop from Triaxial Test

Major Principle Stress (MPa)

120
100
80
60

y = 4.29309x + 87.50599
R2 = 1.00000

40
20
0
0.00

0.50

1.00

1.50

2.00
2.50
3.00
Minor Principal Stress (MPa)

3.50

4.00

4.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

21.12
38.47

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-113/Triaxial_Compression_Test

BB8

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Date : 22/07/2009
Tested by : Mr.Opas C.
Checked by : Mr.Patara Kalayasri

Company : PORTCOAST CORP.


Project
: NGHI SON
Location Vietnam

Sample Delivery : 25/07/2009 by Client

Sample Description: Rock core

SAMPLE PROPERTIES
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

L3P
5.40
22.90

Length Conf. Pressure Axial Load

Weigh
573.20
529.50
606.40

Depth(m) : 51.4 - 51.7

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

L3P-1

10.26

1.00

197.3

86.15

L3P-2

5.85

2.00

259.8

113.44

L3P-3

6.40

4.00

275.8

120.43

From Graph
m

10.29

82.66

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

12.88

55.37

Linear Strength Envelop from Triaxial Test

Major Principle Stress (MPa)

140
120
100
80

y = 10.2922x + 82.6558
R2 = 0.7534

60
40
20
0
0.00

0.50

1.00

1.50

2.00
2.50
3.00
Minor Principal Stress (MPa)

3.50

4.00

4.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

12.88
55.37

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-113/Triaxial_Compression_Test

L3P

Geotechnical and Geoenvironmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

TRIAXIAL COMPRESSION TEST


(ISRM SUGGEST METHOD)
Company : PORTCOAST CORP.
Project
: NGHI SON
Location : Vietnam

Date : 22/07/2009
Tested by : Mr.Opas C.
Checked by : Mr.Patara Kalayasri

Sample Description: Rock core

Sample Delivery : 25/07/2009 by Client

SAMPLE PROPERTIES
Weigh
Dimension of Sample:
diameter (cm) =
X-section area (sq.cm) =
Sample

LL8P
5.42
23.07

Length Conf. Pressure Axial Load

Depth(m) :

Axial Stress

No.

(cm)

(Mpa)

(KN)

(Mpa)

LL8P-1

5.23

1.00

110.2

47.76

LL8P-2

5.41

4.00

220.3

95.48

573.20
529.50
606.40

66.4 - 66.6

From Graph
m

15.91

31.86

App. Cohesion, Int. Frict. Angle


C

(MPa)

(Degree)

3.99

61.85

Linear Strength Envelop from Triaxial Test

Major Principle Stress (MPa)

120
100
80
60
40

y = 15.90661x + 31.85656
R2 = 1.00000

20
0
0.00

0.50

1.00

1.50

2.00
2.50
3.00
Minor Principal Stress (MPa)

3.50

4.00

4.50

Mode of Failure

RESULTS
Shear Strength, C =
Friction Angle, =

3.99
61.85

MPa
Degree

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-113/Triaxial_Compression_Test

LL8P

APPENDIX 7.4: SLAKE DURABILITY INDEX TEST RESULT


PROJECT: THE INTERGRATED STEEL MILL & SON DUONG PORT FORMOSA
HA TINH

Geotechnical and Geo-Environmental Laboratory


School of Engineering and Technology
Asian Institute of Technology
P.O. Box 4, Klongluang Pathumthani 12120, Thailand
Tel : 524-5505 Fax : 524-8337

SLAKE DURABILITY TEST (ASTM D 4644)


Company

: PORTCOAST CONSULTANT CORPORATION

Date

Project

: STEEL MILL AND PORT FORMOSA HATINH

Tested By

Source

: VIETNAM

Checked By :

Sample Description : ROCK CORE

2/6/2009
:

Mr.Opas C.
Dr.Pitthaya Jamsawang

Sample Delivery : 25/5/2008 by Client

General
This test method covers the determination of the slake durability index of a shale or other similar rock after two drying and wetting cycles with abrasion.

Apparatus
1. Slake Durability Device
2. Oven
3. Balance

Test Procedure
1. Place the sample in the drum, weigh and oven dry for 16 hours. Allow to cool down at room temperature and weight again.
2. Mount the drum in the trough and couple to the motor. Fill the trough with water to 20 mm below drum axis. Rotate the drum aat 20 rpm for a period of 10 min.
3. Oven dry the sample and drum for 16 hours. Weigh the sample with drum to obtain the oven dried mass for the second cycle.
4. Rotate the drum again for 10 min. at 20 rpm, oven dry and weigh to obtain a final mass.

TESTING DATA :
Hole
Drum wt.
Cycle 1
(gm)
Before A After B
No.
B11(36.5-38m) 1786.97 2288.55 2270.03
B2(40-43.8m) 1765.12 2276.96 2260.14

Cycle 2
Final wt.
2261.78
2258.01

Slake Durability Index, Id (%)


Remark
1st Cycle
2nd Cycle
96.31
94.66
Retained pieces remain virtually unchanged.
96.71
96.30
Retained pieces remain virtually unchanged.

Note : -This results certify the adequacy and representative character of the test Samples only.
- Not valid unless signed and sealed.
gt09-083/Slake

Slake- new

S-ar putea să vă placă și