Documente Academic
Documente Profesional
Documente Cultură
ABB is a global leader in power and automation technologies that enable utility
and industry customers to improve their performance while lowering environmental
impact. The ABB Group of companies operates in around 100 countries and
employs about 107,000 people.
Contents
Page
11
Aluminum motors
11
Steel motors
79
111
145
Global motors
165
Brake motors
189
215
General information
General information
Standards
ABB motors are of the totally enclosed and open drip
proof, single or three phase squirrel cage type, built
to comply with international IEC and EN standards.
Motors conforming to other national and international
specications are also available on request.
Electrical
Mechanical
IEC/EN 60034-1
IEC/EN 60034-2
IEC 60034-8
IEC 60034-12
IEC 60072
IEC/EN 60034-5
IEC/EN 60034-6
IEC/EN 60034-7
IEC/EN 60034-9
IEC 60034-14
M000329
M000002
M000001
All production units are certied to ISO 9001 international quality standard as well ISO 14000 environmental standard and conrm to all applicable EU
Directives.
M000003
IEC / EN
2-pole
Boarderline
EFF2/EFF3
EFF1/EFF2
76.2
78.5
81.0
82.6
84.2
85.7
87.0
88.4
89.4
90.0
90.5
91.4
92.0
92.5
93.0
93.6
93.9
82.8
84.1
85.6
86.7
87.6
88.6
89.5
90.5
91.3
91.8
92.2
92.9
93.3
93.7
94.0
94.6
95.0
M000005
EFF2/EFF3
EFF1/EFF2
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
76.2
78.5
81.0
82.6
84.2
85.7
87.0
88.4
89.4
90.0
90.5
91.4
92.0
92.5
93.0
93.6
93.9
83.8
85.0
86.4
87.4
88.3
89.2
90.1
91.0
91.8
92.2
92.6
93.2
93.6
93.9
94.2
94.7
95.0
M000006
4-pole
Boarderline
A = foot-mounted,
term.box top
R = foot-mounted,
term.box RHS
L = foot-mounted,
term.box LHS
IM B5
IM V1
IM V3
*)
*)
*)
IM 3001 IM 3011 IM 3031 IM 3051 IM 3061 IM 3071
B = ange mounted,
large ange
C = ange mounted,
small ange
M000007
Foot-mounted motor.
M000008
Flange-mounted motor,
large ange
M000009
Flange-mounted motor,
small ange
M000010
M000011
H = foot/ange-mounted,
term.box top
S = foot/ange-mounted,
term.box RHS
T = foot/ange-mounted,
term.box LHS
J = foot/ange-mounted,
small ange
M000012
Foot-mounted motor,
shaft with free extensions IM 1002 IM 1012 IM 1032 IM 1052 IM 1062 IM 1072
Cooling
Designation system concerning
methods of cooling refers to standard IEC 60034-6.
Example
IC
(A)
(A)
International Cooling
Circuit arrangement
0: Free circulation (open circuit)
4: Frame surface cooled
Primary coolant
A for air (omitted for simplied designation)
Method of movement of primary coolant
0: Free convection
1: Self-circulation
6: Machine-mounted independent component
Secondary coolant
A for air (omitted for simplied designation)
W for water
Method of movement of secondary coolant
0: Free convection
1: Self-circulation
6: Machine-mounted independent component
8: Relative displacement
IP
Characteristic letter
Degree of protection to persons and to parts of the motors inside the enclosure
2: Motors protected against solid objects greater than 12 mm
4: Motors protected against solid objects greater than 1 mm
5: Dust-protected motors
Degree of protection provided by the enclosure with respect
to harmful effects due to ingress of water
3: Motors protected against spraying water
4: Motors protected against splashing water
5: Motors protected against water jets
6: Motors protected against heavy seas
IK code :
Classication of degrees of protection provided by
enclosure for motors against external mechanical
impacts.
IK
08
IK 05
0.7
IK 06
1
IK 07
2
IK 08
5
IK 09
10
IK 10
20
ABB
Standard
Insulation
Class F insulation system
Max ambient temperature 40 C
Max permissible temperature rise 105 K
Hotspot temperature margin + 10 K
Class B rise
Max ambient temperature 40 C
Max permissible temperature rise 80 K
Hotspot temperature margin + 10 K
Insulation system temperature class
Class F 155 C
Class B 130 C
Class H 180 C
M000013
Speed r/min
2-pole
4-pole
63-80
90-100
112-200
225-280
6000
6000
4500
3600
4500
6000
4500
3600
Figure 2. Selection rules for insulation and ltering in variable speed drives
Motor nominal power PN or frame size
PN < 100 kW
PN 100 kW or
IEC 315 Frame size IEC 355
UN 500 V
Standard motor
Standard motor
+ Insulated N-bearing
Standard motor
+ Insulated N-bearing
+ Common mode lter
UN 600 V
Standard motor
+ dU/dt-lter (reactor)
OR
Reinforced insulation
Standard motor
+ dU/dt-lter (reactor)
+ Insulated N-bearing
OR
Reinforced insulation
+ Insulated N-bearing
Standard motor
+ Insulated N-bearing
+ dU/dt-lter (reactor)
+ Common mode lter
OR
Reinforced insulation
+ Insulated N-bearing
+ Common mode lter
UN 690 V
Reinforced insulation
+ dU/dt-lter (reactor)
Reinforced insulation
+ dU/dt-lter (reactor)
+ Insulated N-bearing
Reinforced insulation
+ Insulated N-bearing
+ dU/dt-lter (reactor)
+ Common mode lter
Figure 3. Motor loadability with ACS 800, Field weakening point 50 Hz.
M000014
Validity of gure 2
Measures mentioned in Figure 2 apply to the applicable motors within the General motors range (not high-output
versions) with ACS 800 and ACS 550 drives with uncontrolled DC-voltage. For other alternatives and converter
types, please contact ABB.
10
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
11
Mechanical design
Stator
Stator framework, bearing shields and feet are made
of an extra corrosion resistant aluminum alloy with low
copper content with the following exceptions:
M2AA 180-250 and M3AA 250 SMA-2 basic version,
have cast iron feet.
M3AA 280 has feet and D-end shield of cast iron.
Drain holes
M000015
12
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Terminal box
M000017
M000016
Connections
The terminal block is provided with
6 terminals for connecting Cu-cable. The terminals are marked in
accordance with IEC 60034-8.
M000020
M000019
M000018
Connection openings
Motor
size
Opening
56-63
Knock-out opening
71-80
Knock-out opening
90-100
112-132
160-180
200 1)
200-250 2)
280
Knock-out opening
Knock-out opening
Knock-out opening
Knock-out opening
2 x FL 13
2 x FL 21
1)
M2AA
2)
Metric
cable entry
Method of
connection
Terminal
bolt size
Maximum
connectable
Cu-cable
area, mm2
1 x M16 x 1.5
1 x Pg 11
2 x M20 x 1.5
2 x Pg 16
2 x (M25 + M20)
2 x (M25 + M20)
2 x (2 x M40 + M16)
2 x (2 x M40 + M16)
1 x (2 x M40 + M16)
1 x (2 x M63 + M16)
Screw terminal
M4
2.5
Screw terminal
M4
Screw terminal
Cable lug
Cable lug
Cable lug
Cable lug
Cable lug
M4
M5
M6
M6
M10
M10
6
10
35
35
70
70
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
13
Bearings
The motors are provided with bearings according to
the tables below.
Alternative designs:
Version with roller bearings
56
63
71
80
90
100
112 2)
112 2)
132 2)
132 2)
160
180
200 1)
200
225 1)
225
250 1)
250
280
280
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6306-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6208-2Z/C3
6309-2Z/C3
6310-2Z/C3
6312-2Z/C3
6312/C3
6313/C3
6313/C3
6315/C3
6315/C3
6315/C3
6316/C3
1)
2)
short
long
short
long
2-pole
4-8 pole
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6205-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6209-2Z/C3
6209-2Z/C3
6209-2Z/C3
6210/C3
6210/C3
6212/C3
6212/C3
6213/C3
6213/C3
6213/C3
M2AA
short: M2AA 112: M-2,M-4; M2AA 132: SA-2, SB-2, S-4, M-4
M3AA 112: M-6, M-8; M3AA 132: SA-2, S-4, S-6, MA-6,
MB-6, S-8, M-8, S-two-speed
long:
remaining versions
D-end
N-end
90
100
160
180
200
225
250
280
280
NU 205
NU 306
NU 309 ECP
NU 310 ECP
NU 312 ECP
NU 313 ECP
NU 315 ECP
NU 315 ECP
NU 316 ECP
D-end
058
N-end
059
90
100
112 2)
112 2)
132 2)
132 2)
160 1)
180 1)
200 1)
225 1)
250 1)
280
280
7205 B
7306 B
7206 BE
7206 BE
7208 BE
7208 BE
7309 BE
7310 BE
7312 BE
7313 BE
7315 BE
7315 BE
7316 BE
7204 B
7205 B
7205 BE
7206 BE
7206 BE
7208 BE
7209 BE
7209 BE
7210 BE
7212 BE
7213 BE
7213 BE
7213 BE
1)
2)
14
2-pole
4-8 pole
short
long
short
long
2-pole
4-8 pole
M2AA
short:
on request
M2AA 112: M-2,M-4; M2AA 132: SA-2, SB-2, S-4, M-4
M3AA 112: M-6, M-8; M3AA 132: SA-2, S-4, S-6, MA-6,
MB-6, S-8, M-8, S-two-speed
long:
remaining versions
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Transport locking
Motors provided with roller bearings or angular contact
ball bearings are fitted with a transport lock to prevent damage to the bearings, due to vibration, during
transport.
Axially-locked bearings
The table below shows which of the motors bearings are axially locked in the bearing seat. In motor
sizes 56 to 80 the locking is done by an inner bearing
circlip, in motor sizes 90 to 280 by an inner bearing
cover.
1)
Motor
size
Foot-mounted
motors
Flange-mounted motors
Large flange
Small flange
56-63
71-80
90-100
On request at D-end
On request at D-end
D-end 1)
On request at D-end
D-end
On request at D-end
On request at D-end
112-132
160-280
D-end 1)
D-end
D-end 1)
D-end
D-end
D-end 1)
D-end
Lubrication
The motors are delivered with bearing grease for use
at normal temperatures in dry or humid environments.
The motors are lubricated for ambient temperatures
40C and in some cases even above 40C, see table 1
next page.
Motor sizes 63-180 and M2AA 200 are provided with
shielded bearings. On request, motor sizes 90 to 180
and M2AA 200 are provided with grease nipples for
regreasing, see variant code 041 under the heading
Bearings and lubrications.
Motor sizes 200-280, except M2AA 200, are provided
with grease nipples for re-greasing as standard.
Lubrication intervals and grease quantities are specified on a plate on the motor as well as in the manual
supplied with the motor.
The grease lifetime L10, suitable for permanent lubricated bearings, is defined as the number of operating hours after which 90 per cent of the bearings are
adequately lubricated. 50 per cent of the bearings
achieve two times this figure. Maximum lifetime, however, should be regarded as 40000 hours.
In case of high ambient temperatures the shaft loads
must be reduced compared to permissible loadings in
the table (see pages 18 to 21), please contact ABB.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
15
Table 1: Grease lifetime L10 in deep groove ball bearings of type 2Z in horizontally mounted motors in continuous running
duty.
Motor
56-63
71
80
90
100
112
132
160
180
M2AA
200
r/min
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
1000
750
3000
1500
25 C
Basic
High
40000
40000
40 C
Basic
High
40000
40000
40000
40000
40000
40000
70 C
Basic
High
40000
80 C
Basic
High
27000
40000
37000
40000
32000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
30000
24000
40000
32000
24000
40000
19000
29000
40000
27000
37000
32000
40000
40000
40000
40000
40000
40000
40000
30000
40000
40000
40000
40000
40000
40000
40000
35000
21000
33000
40000
30000
40000
33000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
35000
35000
24000
40000
40000
40000
31000
26000
40000
40000
40000
40000
38000
38000
34000
40000
40000
34000
38000
40000
40000
27000
40000
27000
38000
40000
20000
38000
22000
30000
40000
17000
25000
25000
30000
29000
20000
40000
30000
40000
40000
31000
22000
40000
26000
27000
40000
40000
23000
30000
17000
15000
40000
36000
14000
40000
31000
17000
21000
40000
35000
35000
35000
40000
14000
37000
30000
30000
20000
28000
40000
40000
11000
22000
19000
24000
36000
40000
27000
33000
40000
37000
40000
32000
9000
15000
20000
10000
15000
30000
8000
In vertically mounted motors, the grease lifetime is half the figures above.
For applications corresponding to the empty cells in the table, please contact ABB. These applications can imply reduced lifetime for bearings and winding.
Lubrication intervals
ABB follows the L1-principle in
defining lubrication interval. That
means that 99% of the motors are
sure to make the interval time. The
lubrication intervals can also be calculated according to the L10-principle, which are normally doubled
Frame Amount
size
of
grease
g
Ball bearings:
180
30
200
40
225
50
250
60
280
35
280
70
16
3600
3000
1800
1500
1000
r/min
r/min
r/min
r/min
r/min
6000
4000
3000
2500
2000
-
500750
r/min
23000
21000
20000
18000
17000
1000
r/min
500750
r/min
10000
8500
8000
7500
7000
11500
10500
10000
9000
8500
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
1.9 107 K P
n FR
where:
D = diameter of pulley, mm
P = power requirement, kW
n = motor speed, r/min.
K = belt tension factor, dependent on belt type and
type of duty. A common value for V-belts is
K = 2.5
FR = permissible radial force according to the tables
Bearing life
The nominal life is defined as the number of hours that
are attained or exceeded by 90% of identical bearings,
in a large test series, under certain specified conditions. 50% of the bearings attain a life of as much as 5
times this figure.
50 Hz
60 Hz
25,000
21,000
40,000
33,000
63,000
52,000
80,000
67,000
Motor
size
56
63
71
FR = FX0 - X
E (FX0 - FXmax)
80
90
M000021
1001)
1)
Length
of shaft
No. of extension
poles E (mm)
2
4
6
8
2
4
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
240
300
340
340
490
490
490
680
680
680
680
630
930
930
930
1010
1010
1010
1010
2280
2280
2280
2280
20
20
20
20
23
23
23
30
30
30
30
40
40
40
40
50
50
50
50
60
60
60
60
200
200
280
280
400
400
400
570
570
570
570
750
750
750
750
810
810
810
810
1800
1800
1800
1800
260
280
340
340
490
490
490
680
680
680
680
930
930
930
930
1010
1010
1010
1010
2280
2280
2280
2280
200
200
280
280
400
400
400
570
570
570
570
750
750
750
750
810
810
810
810
1800
1800
1800
1800
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
17
Roller bearings
Alternative design
with roller bearings
25,000 hrs
25,000 hrs
Motor
size
No. of
poles
Length
40,000 hrs
of shaft 25,000 hrs
extention
E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
112 M
60
1800
1420
1620
1280
2160
1700
2160
1700
60
1790
1410
1590
1250
2160
1700
2160
1700
60
1910
1510
1700
1340
2160
1700
2160
1700
60
1940
1530
1720
1360
2160
1700
2160
1700
60
1820
1470
1640
1330
2100
1700
2100
1700
60
1770
1430
1560
1260
2100
1700
2100
1700
60
1880
1520
1650
1340
2100
1700
2100
1700
60
1930
1560
1690
1370
2100
1700
2100
1700
132 SA
80
3020
2360
2740
2140
4070
3180
3670
2870
132 SB
80
3020
2360
2730
2130
4060
3170
3670
2870
132 SC
80
3030
2430
2750
2200
3990
3200
3690
2960
132 S
80
3120
2440
2790
2180
4090
3200
3830
2990
132 M
80
3080
2410
2750
2150
4100
3200
3780
2950
132 MB
80
3050
2440
2710
2170
3990
3200
3740
3000
132 S
80
3280
2560
2910
2270
4100
3200
3990
3120
132 MA
80
3240
2530
2880
2250
4100
3200
3970
3100
132 MB
80
3200
2500
2840
2220
4100
3200
3930
3070
132 MC
80
3010
2510
2660
2220
3840
3200
3700
3090
132 S
80
3370
2630
2980
2330
4100
3200
4100
3200
132 M
80
3310
2590
2940
2300
4100
3200
4060
3170
132 MB
80
3280
2630
2910
2330
3990
3200
3990
3200
160 MA
110
4470
3500
4470
110
4470
3500
110
4470
110
110
112 MB
Alternative design
with 63-series bearings
160 M
160 L
160 LB
180 M
18
40,000 hrs
FX0 (N)
FXmax(N)
40,000 hrs
FX0 (N)
FXmax(N)
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4380
3500
4380
3500
4380
3500
4380
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4380
3500
4380
3500
4380
3500
4380
3500
110
4380
3500
4380
3500
4380
3500
4380
3500
110
6900
5550
6360
5110
7338
5900
7340
5900
110
7100
5710
6470
5200
7338
5900
7340
5900
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Motor
size
180 L
180 LB
M2AA 200
M3AA 200 MLA
225 SMC
250 SMA
250 SMB
280 SMA
280 SMB
Length
of shaft 25,000 hrs
40,000 hrs
No. of extention
poles E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
Roller bearings
Alternative design
with roller bearings
25,000 hrs
FX0 (N)
40,000 hrs
FXmax(N)
110
7050
5670
6410
5150
7340
5900
7340
5900
110
7340
5900
6840
5500
7340
5900
7340
5900
110
7340
5900
6930
5570
7340
5900
7340
5900
110
6900
5550
6360
5110
7340
5900
7340
5900
110
6990
5670
6350
5150
7280
5900
7280
5900
110
7280
5900
6780
5500
7280
5900
7280
5900
110
7280
5900
6870
5570
7280
5900
7280
5900
110
7000
5800
6300
5200
9100
7500
8100
6700
110
6700
5500
5900
4900
9500
7800
8600
7100
110
4940
4070
4370
3600
9460
7790
9460
7790
110
5360
4410
4690
3860
9460
7790
9460
7790
110
5590
4600
4850
3990
9460
7790
9460
7790
110
5680
4680
4910
4040
9460
7790
9460
7790
110
4930
4060
4360
3590
9460
7790
9460
7790
110
5290
4360
4630
3810
9460
7790
9460
7790
110
5510
4540
4780
3940
9460
7790
9460
7790
110
5670
4670
4890
4030
9460
7790
9460
7790
110
4920
4050
4360
3590
9460
7790
9460
7790
110
5380
4430
4640
3820
9460
7790
9460
7790
140
5830
4930
5100
4320
9810
8300
9810
8300
140
6400
5420
5550
4700
9810
8300
9810
8300
110
5400
4530
4780
4010
10600
8900
10600
8900
140
5750
4870
5030
4260
9810
8300
9810
8300
140
6000
5080
5200
4400
9810
8300
9810
8300
140
6320
5350
5470
4630
9810
8300
9810
8300
110
5370
4510
4750
3990
10600
8900
10600
8900
140
5720
4840
5000
4230
9810
8300
9810
8300
140
5930
5020
5130
4340
9810
8300
9810
8300
140
6180
5230
5320
4500
9810
8300
9810
8300
140
6970
5620
6180
4980
11290
9100
11290
9100
140
7693
6200
6750
5440
14330
11550
14330
11550
140
7978
6430
6940
5590
14330
11550
14330
11550
140
8250
6650
7150
5760
14330
11500
14330
11550
140
6960
5610
6150
4960
11290
9100
11290
9100
140
7620
6140
6680
5380
14330
11550
14330
11550
140
7940
6400
6900
5560
14330
11550
14330
11550
140
8180
6590
7070
5700
14330
11550
14330
11550
140
6650
5400
5850
4750
15260
12400
13790
11200
140
7750
6300
6890
5600
18460
15000
16560
13450
140
8810
7100
7760
6250
21090
17000
18860
15200
140
9000
7250
7880
6350
21840
17600
19360
15600
140
6460
5250
5720
4650
15260
12400
13790
11200
140
7510
6100
6590
5350
17850
14500
16060
13050
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
19
M000022
Motor
size
56
63
71
80
90
100
112 M
112 MB
132 SA
132 SB
132 SC
132 S
132 M
132 MA
132 MB
132 MC
160 MA
160 M
160 L
160 LB
180 M
180 L
180 LB
200 MLA
200 MLB
200 MLC
225 SMA
225 SMB
225 SMC
250 SMA
250 SMB
280 SMA
280 SMB
20
20,000 hours
2-pole
FAD
FAZ
N
N
470
790
985
1305
1360
2805
1500
1530
2570
2570
2520
4730
4730
5240
4240
4660
4660
3050
3050
3050
3440
3440
4180
4180
5000
5000
230
390
485
705
930
1945
1500
1530
2570
2570
2520
4730
4730
5240
4240
4660
4660
3050
3050
3050
3440
3440
4180
4180
5000
5000
4-pole
FAD
FAZ
N
N
520
865
1070
1420
1490
3075
1600
1600
2770
2750
2680
5230
5220
5050
4950
4870
4870
3850
3850
4340
4340
4340
5260
5260
6200
6100
280
465
570
820
1070
2215
1600
1600
2770
2750
2680
5230
5220
5050
4950
4870
4870
3850
3850
4340
4340
4340
5260
5260
6200
6100
FAZ
FAD
Mounting arrangement IM B3
6-pole
FAD
FAZ
N
N
540
1135
1505
1590
3260
1730
1720
2950
2940
2910
2830
5220
5050
4720
5200
5200
4400
4400
4400
4960
4960
6020
6020
7100
-
300
635
905
1165
2400
1730
1720
2950
2940
2910
2830
5220
5050
4720
5200
5200
4400
4400
4400
4960
4960
6020
6020
7100
-
8-pole
FAD
FAZ
N
N
40,000 hours
2-pole
FAD
FAZ
N
N
540
895
1130
1540
1635
3355
1750
1760
3040
3020
2940
5240
5220
4720
4720
5370
5370
4850
4850
5460
5460
5460
6630
6630
7350
-
430
720
900
1185
1225
2540
1320
1340
2260
2260
2210
4220
4220
4650
4650
4250
4250
2430
2430
2430
2730
2730
3320
3320
4500
4400
300
495
630
940
1210
2495
1750
1760
3040
3020
2940
5240
5220
4720
4720
5370
5370
4850
4850
5460
5460
5460
6630
6630
7350
-
190
320
400
585
800
1680
1320
1340
2260
2260
2210
4220
4220
4650
4650
4250
4250
2430
2430
2430
2730
2730
3320
3320
4500
4400
FAD
N
4-pole
FAZ
N
470
780
970
1285
1335
2760
1390
1390
2440
2420
2340
4640
4630
4470
4500
4390
4390
3050
3050
3440
3440
3440
4180
4180
5400
5300
230
380
470
685
915
1900
1390
1390
2440
2420
2340
4640
4630
4470
4500
4390
4390
3050
3050
3440
3440
3440
4180
4180
5400
5300
FAD
N
6-pole
FAZ
N
480
1020
1350
1415
2910
1500
1490
2580
2570
2550
2460
4630
4470
4740
4710
4710
3500
3500
3500
3940
3940
4780
4780
6250
-
240
520
750
990
2050
1500
1490
2580
2570
2550
2460
4630
4470
4740
4710
4710
3500
3500
3500
3940
3940
4780
4780
6250
-
FAD
N
8-pole
FAZ
N
480
895
1015
1375
1450
2985
1510
1520
2650
2630
2560
4640
4630
4740
4740
4850
4850
3850
3850
4340
4340
4340
5260
5260
6500
-
240
495
515
775
1025
2125
1510
1520
2650
2630
2560
4640
4630
4740
4740
4850
4850
3850
3850
4340
4340
4340
5260
5260
6500
-
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
FAZ
Mounting arrangement IM V1
Motor
size
56
63
71
80
90
100
112 M
112 MB
132 SA
132 SB
132 SC
132 S
132 M
132 MA
132 MB
132 MC
160 MA
160 M
160 L
160 LB
180 M
180 L
180 LB
200 MLA
200 MLB
200 MLC
225 SMA
225 SMB
225 SMC
250 SMA
250 SMB
280 SMA
280 SMB
20,000 hours
2-pole
FAD
FAZ
N
N
470
790
998
1320
1390
2855
2290
2340
3550
3560
3550
4940
4960
5520
5540
4990
5040
3600
3600
3600
4140
4140
5020
5020
5950
5950
230
380
470
685
900
1890
2170
2170
3370
3360
3270
4520
4500
4960
4940
4330
4280
2500
2500
2500
2740
2740
3330
3330
4050
4050
4-pole
FAD
FAZ
N
N
520
875
1085
1445
1525
3135
2490
2520
3910
3910
3880
5500
5560
5420
5400
5390
5470
4580
4580
5230
5230
5230
6380
6380
7380
7380
270
455
555
790
1035
2155
2330
2300
3630
3590
3460
4960
4880
4680
4500
4350
4270
3120
3120
3440
3440
3440
4150
4150
5010
5010
M000023
FAD
6-pole
FAD
FAZ
N
N
540
1150
1530
1625
3320
2680
2700
4160
4180
4180
4110
5540
5420
5170
5770
5810
5280
5280
5280
6030
6030
7440
7440
8540
-
290
620
880
1130
2340
2510
2480
3880
3850
3780
3690
4900
4680
4280
4630
4590
3530
3530
3530
3900
3900
4610
4610
5660
-
8-pole
FAD
FAZ
N
N
40,000 hours
2-pole
FAD
FAZ
N
N
540
905
1145
1565
1670
3420
2770
2790
4320
4330
4260
5520
5540
5170
5170
5930
5980
5720
5720
6530
6530
6530
8050
8050
8810
-
430
725
910
1200
1255
2590
2030
2080
3160
3170
3160
4430
4450
4930
4950
4580
4630
2970
2970
2970
3430
3430
4160
4160
5450
5450
290
485
615
915
1180
2425
2590
2570
3990
3930
3840
4960
4900
4280
4280
4810
4760
3980
3980
4400
4400
4400
5210
5210
5890
-
190
310
385
565
770
1625
1910
1910
2980
2970
2880
4010
3990
4370
4350
3920
3870
1870
1870
1870
2030
2030
2470
2470
3550
3550
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
FAD
N
4-pole
FAZ
N
470
790
985
1310
1370
2820
2190
2220
3460
3450
3430
4910
4970
4840
4950
4910
4990
3780
3780
4330
4330
4330
5290
5290
6580
6580
230
370
455
655
880
1840
2030
2000
3180
3130
3010
4370
4290
4100
4050
3870
3790
2320
2320
2550
2550
2550
3060
3060
4210
4210
FAD
N
6-pole
FAZ
N
480
1035
1375
1450
2970
2350
2360
3660
3670
3680
3610
4950
4840
5190
5280
5320
4370
4370
4370
5010
5010
6200
6200
7690
-
240
505
725
955
1990
2180
2140
3380
3340
3280
3190
4310
4100
4300
4140
4100
2620
2620
2620
2870
2870
3360
3360
4810
-
FAD
N
8-pole
FAZ
N
480
810
1030
1400
1485
3050
2410
2430
3780
3790
3730
4920
4950
5190
5190
5410
5460
4720
4720
5400
5400
5400
6680
6680
7960
-
240
390
500
750
990
2060
2230
2210
3450
3390
3310
4360
4310
4300
4300
4290
4240
2980
2980
3270
3270
3270
3840
3840
5040
-
21
Rating plates
Motor sizes 56 to 71
Motor sizes 80
M000025
M000024
ABB
3~MotorM3AA 132M
3G AA 132024-ADC
Cl. F
IP 55
IEC 60034-1
M000027
No.
V
660-690
Hz r/min
50 1450
kW
7,5
8,4
cos
0,87
380-420
50 1450
7,5
14,6
0,87
440-480
60 1750
8,6
14,3
0,87
6208-2Z/C3
6208-2Z/C3
59
kg
M000028
22
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
The product code of the motor is composed in accordance with the following example.
Motor type
M3AA 112 MB
Pole number
4
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
5.5 kW
Product code
3GAA 112002-ACD
Variant codes if needed
Motor size
A
D, E, F
A
B
C
D
Motor type
Motor size
Product code
Code for mounting
arrangement
Voltage and frequency code
Generation code
followed by variant codes
1 2 3 4 5 6 7 8 9 10 1112 13 14...
E
F
=
=
=
=
=
=
=
56
63
71
80
90
100
112
13 =
16 =
18 =
20 =
22 =
25 =
28 =
132
160
180
200
225
250
280
Position 7
Pole pairs
1 = 2 poles
2 = 4 poles
3 = 6 poles
4 = 8 poles
5 = 10 poles
6 = 12 poles
7 = > 12 poles
8 = Two-speed motors
9 = Multi-speed motors
Position 12
Mounting arrangement
A = Foot-mounted motor
B = Flange-mounted motor.
Large flange with clearance holes.
C = Flange-mounted motor.
Small flange with tapped holes.
F = Foot- and flange-mounted motor.
Special flange.
H = Foot- and flange-mounted motor.
Large flange with clearance holes.
J = Foot- and flange-mounted motor.
Small flange with tapped holes.
N = Flange-mounted (CI ring flange FF)
P = Foot-and flange-mounted motor
(CI ring flange FF)
V = Flange-mounted motor. Special flange.
Positions 8 to 10
Running number
Position 11
- (dash)
Position 13
Voltage and frequency: See tables below
Position 14
Version A,B,C... =
Generation code followed by variant codes
Code letters for supplementing the product code - single speed motors
Motor
size
H
50 Hz
E
50 Hz
F
50 Hz
T
50 Hz
U
50 Hz
500 VY
660 V1)
690 V1)
660 V
690 V
660 V
690 V
Other rated
voltage,
connection
or frequency,
690 V
maximum
56-100
220-240 V
380-420 VY
440-480 VY
380-420 V
660-690 VY
440-480 V
-
500 V1)
112-132
220-240 V
380-420 VY
440-480 VY
380-420 V
660-690 VY
440-480 V
-
415 V
500 V
160-280
220, 230 V
380,400,415 VY 440 VY
380,400,415V
660, 690 VY
440 V
-
415 V
500 V
500 VY
500 VY
) On request.
D
380-400 V
380-400 V
400 V
H
400-415 V
400-415 V
415 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
E
500 V
500 V
500 V
23
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
1)
2)
1)
1)
1)
1)
1)
1) 2)
1)
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
56 A
56 B
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 LA
200 L
225 M
250 M
Power
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
0.31
0.41
0.62
0.87
1.25
1.86
2.49
3.69
5
7.5
10
13.4
18.3
25
36
49.4
61
72
97
120
146
177
2.9
3.2
3.5
3.6
3.8
3.6
2.9
2.3
2.4
2.5
2.7
2.8
2.7
3.2
2.1
2.4
2.6
2.8
3.0
3.1
2.8
2.8
2.7
2.8
3.1
3.3
3.9
3.7
3.6
3.5
3.0
3.0
3.6
3.0
3.5
3.8
2.5
2.6
3.0
3.2
3.7
3.6
3.0
3.0
400 V 50 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
051 001-A
051 002-A
061 001-C
061 002-C
071 001-C
071 002-C
081 001-B
081 002-B
091 001-E
091 002-E
101 001-E
111 001-A
131 001-A
131 002-A
161 111-A
161 112-A
161 113-A
181 111-A
201 011-A
201 012-A
221 011-A
251 011-A
2820
2840
2820
2810
2840
2830
2870
2850
2870
2885
2900
2850
2855
2855
2915
2900
2915
2925
2945
2945
2940
2960
59.8
67.2
73.7
77.5
77.1
79.2
81.2
81.4
80.1
83.6
86.0
86.0
86.0
87.0
88.4
89.5
90.2
91.2
92.0
92.8
93.0
93.5
Torque
Basic design
53.3
63.8
70.6
75.8
76.5
78.2
79.3
79.5
76.2
83.9
84.1
86.0
86.0
87.0
88.9
89.9
90.5
91.3
92.0
92.9
93.0
93.8
0.69
0.64
0.64
0.71
0.72
0.76
0.75
0.78
0.82
0.87
0.88
0.91
0.88
0.90
0.89
0.90
0.91
0.89
0.88
0.89
0.88
0.90
0.32
0.41
0.56
0.66
1
1.35
1.8
2.5
3.35
4.37
5.95
7.4
10.5
13.9
20.5
27
32.5
39
53
65
80
95
3.9
4.1
4.2
4.5
5.5
5.7
6.2
6.1
5.5
6.0
7.5
7.5
6.8
7.2
6.2
6.1
6.8
7.9
7.9
8.2
7.7
7.3
24
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos
380 V 50 Hz
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
2805
2825
2815
2800
2830
2820
2850
2830
2850
2860
2890
2830
2840
2850
2905
2890
2905
2915
2940
2940
2940
2955
1)
1)
1)
1)
1)
1) 2)
1)
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
56 A
56 B
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 LA
200 L
225 M
250 M
58.6
69.2
74.6
78.5
77.3
80.2
82.2
81.1
79.7
83.0
86.0
85.0
85.0
86.0
87.9
88.9
89.2
90.5
91.4
92.3
93.2
93.9
Current
IN
Speed
A
r/min
Efficiency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
0.65
0.59
0.60
0.67
0.68
0.73
0.68
0.74
0.79
0.84
0.85
0.90
0.87
0.88
0.88
0.90
0.90
0.87
0.86
0.88
0.87
0.88
0.34
0.45
0.58
0.69
1.05
1.38
1.9
2.6
3.4
4.2
5.95
7.2
10.2
13.6
20
26
31.5
38.5
52
63
78
93
0.00011
0.00012
0.00013
0.00016
0.0004
0.00045
0.00072
0.00076
0.0019
0.0024
0.0041
0.01
0.014
0.016
0.039
0.047
0.053
0.06
0.094
0.115
0.21
0.31
415 V 50 Hz
0.72
0.68
0.69
0.75
0.75
0.81
0.80
0.84
0.88
0.89
0.90
0.92
0.90
0.91
0.90
0.91
0.91
0.91
0.89
0.91
0.89
0.90
0.32
0.4
0.53
0.64
1
1.31
1.73
2.47
3.4
4.6
6.15
7.8
10.9
14.7
21.5
28.5
34.5
40.5
56
67
83
100
2830
2850
2830
2830
2855
2845
2880
2870
2890
2890
2910
2865
2865
2870
2920
2905
2925
2930
2950
2950
2950
2965
57.8
64.5
72.5
76.2
75.6
77.7
79.2
80.2
79.8
83.3
86.0
86.5
86.5
87.5
88.7
89.8
90.4
91.4
92.1
92.9
93.8
94.3
3.2
3.4
3.9
4.4
5.5
6.5
9
11
13
16
21
25
37
42
73
84
94
111
139
170
209
277
48
48
54
54
58
58
60
60
63
63
65
63
69
69
73
73
73
75
75
75
75
74
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
25
Efficiency
Output
kW
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
0.06
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
2)
Power
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
0.43
0.63
0.82
1.25
1.71
2.51
3.75
5.08
7.5
10
15
20
27
36
49
72
2.2
2.9
2.6
2.5
2.7
2.6
2.6
3.5
2.2
2.4
2.4
2.5
2.8
2.2
2.5
2.7
2.2
2.9
2.6
2.6
2.9
2.8
2.9
3.9
2.7
2.9
2.9
2.9
3.0
3.0
3.2
2.7
400 V 50 Hz
Torque
Basic design
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
56 A
56 B
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 M
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
052 001-A
052 002-A
062 001-C
062 002-C
072 001-C
072 002-C
082 001-B
082 002-B
092 001-E
092 002-E
102 001-E
102 002-E
112 001-A
132 001-A
132 002-A
162 111-A
1340
1370
1400
1380
1410
1420
1390
1410
1410
1420
1430
1430
1435
1450
1450
1460
51.1
55.5
63.7
65.6
70.4
74.6
75.3
78.2
77.5
80.3
83.0
85.0
84.5
87.0
88.0
89.1
45.8
50.2
58.4
62.1
69.1
72.1
73.1
75.6
76.4
78.1
82.7
83.9
85.5
87.0
88.0
89.8
0.67
0.62
0.59
0.64
0.71
0.69
0.76
0.74
0.81
0.79
0.81
0.81
0.80
0.83
0.83
0.81
0.26
0.38
0.46
0.63
0.74
1.05
1.4
1.9
2.59
3.45
4.8
6.48
8.6
11.1
14.8
22
2.5
2.8
3.1
3.1
4.3
4.4
4.6
4.7
5.0
5.0
5.5
5.5
7.0
6.9
7.9
6.5
15
2)
M2AA
160 L
3GAA
162 112-A
1460
90.4
91.0
0.82
29
7.1
98
2.7
3.3
18.5
2)
M2AA
180 M
3GAA
182 111-A
1460
91.1
91.5
0.81
36.5
7.6
121
3.1
3.5
22
2)
M2AA
180 L
3GAA
182 112-A
1460
91.8
92.3
0.82
42
7.9
144
3.1
3.8
30
2)
M2AA
200 L
3GAA
202 011-A
1470
92.0
92.1
0.80
59
7.8
195
3.0
3.4
37
2)
M2AA
225 S
3GAA
222 011-A
1475
92.8
93.0
0.85
68
6.8
240
3.0
3.1
45
2)
M2AA
225 M
3GAA
222 012-A
1475
93.0
93.1
0.84
84
8.1
291
3.5
3.2
55
2)
M2AA
250 M
3GAA
252 011-A
1475
93.7
94.3
0.84
98
6.8
356
2.5
2.6
1)
2)
On request.
Temperature rise class F for 380 V 50 Hz.
26
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos
380 V 50 Hz
0.06
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
1335
1360
1390
1370
1400
1410
1380
1400
1410
1420
1430
1430
1425
1445
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M2AA
M2AA
M2AA
M2AA
M2AA
M2AA
7.5
56 A
56 B
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
50.5
57.1
63.1
66.9
69.9
74.6
75.5
78.7
76.3
79.9
83.0
85.0
84.0
86.0
Current
Speed
IN
A
r/min
Efficiency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
0.63
0.58
0.55
0.59
0.67
0.65
0.68
0.67
0.76
0.77
0.78
0.77
0.75
0.81
0.28
0.4
0.49
0.67
0.77
1.1
1.55
2.05
2.6
3.45
4.85
6.55
8.8
10.9
0.00017
0.00018
0.00019
0.00026
0.00066
0.00089
0.00126
0.00157
0.0032
0.0043
0.0069
0.0082
0.015
0.031
415 V 50 Hz
0.70
0.66
0.63
0.67
0.74
0.73
0.82
0.81
0.83
0.82
0.83
0.85
0.80
0.85
0.26
0.37
0.44
0.63
0.75
1.02
1.35
1.8
2.66
3.5
4.83
6.58
8.9
11.5
1360
1390
1400
1400
1420
1430
1400
1410
1430
1430
1430
1430
1440
1455
49.9
54.9
62.5
64.3
69.2
73.4
73.8
76.0
77.7
80.3
83.0
85.0
85.0
87.5
3.2
3.4
4
4.5
5.5
6.5
9
10.5
13
16
21
24
27
40
36
36
40
40
45
45
50
50
50
50
64
66
56
59
M2AA
132 M
1445
87.0
0.85
15.3
1455
88.0
0.81
14.5
0.038
48
59
11
2)
M2AA
160 M
1450
88.1
0.83
23
1465
89.2
0.79
22
0.067
75
62
15
2)
M2AA
160 L
1455
89.5
0.84
30
1465
90.5
0.80
29
0.088
92
62
18.5
2)
M2AA
180 M
1455
90.4
0.83
37.5
1465
91.2
0.79
36.5
0.102
110
64
22
2)
M2AA
180 L
1455
91.1
0.84
43.5
1465
91.9
0.81
41.5
0.127
128
64
30
2)
M2AA
200 L
1470
92.3
0.82
60
1475
92.6
0.77
58
0.225
177
67
37
2)
M2AA
225 S
1470
92.4
0.86
71
1475
93.2
0.83
67
0.35
216
68
45
2)
M2AA
225 M
1470
93.2
0.85
87
1475
93.8
0.82
83
0.41
237
68
55
2)
M2AA
250 M
1470
93.3
0.86
103
1475
94.1
0.84
95
0.5
286
66
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
27
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
1)
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
80 C
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 MLA
200 MLB
225 SMB
250 SMA
280 SMA
280 SMB
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
3.69
5
7.3
9.9
13.4
18.1
24.6
36
49
61
71
97
120
145
177
241
290
4.2
2.7
3.0
3.9
2.6
3.8
5.1
2.1
2.3
2.6
2.7
2.9
2.3
2.5
2.4
2.4
2.7
3.5
3.6
3.6
4.9
3.4
4.3
5.2
2.8
2.7
2.9
3.0
3.1
2.9
2.9
3.0
3.1
3.4
400 V 50 Hz
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
081 313-B
091 312-E
091 313-E
101 312-E
111 022-C
131 023-C
131 024-C
161 101-C
161 102-C
161 103-C
181 101-C
201 001-C
201 002-C
221 001-C
251 001-C
281 001-C
281 002-C
Power
2850
2900
2880
2920
2860
2900
2915
2930
2920
2920
2930
2955
2950
2960
2970
2970
2970
82.8
85.9
85.8
87.6
87.7
88.6
90.9
91.0
91.3
92.4
92.8
93.2
93.6
94.1
94.2
95.1
95.4
Torque
Basic design
82.6
86.5
87.1
87.5
89.4
89.6
91.3
91.2
91.7
93.1
93.3
93.2
93.7
93.9
93.8
95.2
94.8
0.85
0.87
0.87
0.86
0.93
0.88
0.90
0.88
0.90
0.91
0.89
0.88
0.89
0.88
0.89
0.90
0.90
400 V 50 Hz
2.25
3.2
4.4
5.9
7.1
10.3
13.3
20
26.5
32
38.5
53
64
79
95
127
152
8.1
7.7
7.4
10.0
7.5
9.7
11.0
6.2
6.4
7.2
7.2
8.5
7.2
7.7
7.9
8.2
8.3
High-output design
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 BB
71 BB
71 BC
80 C
90 LB
100 LB
112 MB
132 SBB
132 SC
160 LB
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
061 003-C
071 003-C
071 004-C
081 003-B
091 003-E
101 002-E
111 002-C
131 004-C
131 003-C
161 104-C
2800
2800
2800
2840
2860
2900
2855
2840
2835
2920
73.6
78.9
78.5
82.4
80.7
85.0
86.6
86.8
87.9
92.0
73.1
77.4
77.9
82.2
83.5
84.3
87.9
88.3
89.2
93.0
0.81
0.82
0.85
0.83
0.86
0.86
0.93
0.92
0.93
0.91
0.9
1.59
1.7
3.16
5.7
8.1
9.9
16.8
19.6
38
3.5
5.2
5.1
5.5
7.0
7.5
7.3
8.5
7.7
6.9
1.29
2.33
2.57
5.13
9
13
18.4
31
37
72
2.3
3.2
3.1
2.8
2.6
2.7
2.6
3.3
3.0
2.3
2.2
3.3
3.2
3.1
3.0
3.6
3.4
3.6
3.2
2.9
30
M3AA
180 LB
3GAA
181 102-C
2945
93.7
94.0
0.89
53
7.8
97
2.7
3.0
45
M3AA
200 MLC
3GAA
201 003-C
2950
94.1
94.5
0.89
78
8.2
146
3.0
3.2
M3AA
200 MLD
3GAA
201 004-C
2940
94.0
94.4
0.89
95
7.9
179
3.1
3.1
55
M3AA
225 SMC
3GAA
221 002-C
2960
94.5
94.6
0.89
95
7.3
177
2.8
3.0
75
M3AA
250 SMB
3GAA
251 002-C
2970
95.0
94.9
0.90
127
8.6
241
2.7
3.3
55
1)
1)
1)
1)
1)
1)
1)
80
1)
M3AA
225 SMD
3GAA
221 003-C
2960
94.7
94.7
0.86
143
7.5
258
2.9
3.1
95
1)
M3AA
250 SMC
3GAA
251 003-C
2965
95.4
95.6
0.90
160
8.0
306
2.6
3.1
1)
2)
28
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos
380 V 50 Hz
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
2830
2880
2860
2910
2860
2900
2915
2915
2905
2910
2930
2955
2950
2955
2960
2965
2965
1)
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
80 C
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
200 MLA
200 MLB
225 SMB
250 SMA
280 SMA
280 SMB
81.1
85.1
85.1
87.5
86.7
88.3
90.5
90.8
91.0
92.0
92.4
93.0
93.4
94.0
94.1
95.1
95.3
380 V 50 Hz
0.37
0.68
0.75
1.5
2.7
4
5.5
9.2
1)
1)
1)
1)
Current
IN
Speed
A
r/min
Efficiency
%
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.88
0.87
0.88
0.87
0.93
0.89
0.90
0.89
0.90
0.91
0.90
0.89
0.89
0.89
0.89
0.90
0.89
2.35
3.4
4.5
6.1
7.6
10.7
13.9
20.5
27.5
33.5
40.5
55
68
82
100
134
158
2870
2910
2890
2930
2860
2900
2915
2935
2925
2930
2945
2960
2955
2965
2970
2970
2970
81.2
85.9
86.1
87.7
88.0
88.7
91.2
91.0
91.4
92.6
93.0
93.3
93.7
94.2
94.2
95.2
95.4
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
Basic design
0.80
0.84
0.84
0.83
0.93
0.86
0.90
0.86
0.89
0.90
0.88
0.86
0.87
0.87
0.88
0.89
0.91
2.35
3.1
4.3
5.8
6.9
10
12.9
19.4
25.5
31
37.5
52
63
77
92
123
148
415 V 50 Hz
0.00109
0.0024
0.0027
0.005
0.012
0.016
0.022
0.039
0.047
0.053
0.077
0.15
0.18
0.26
0.49
0.57
0.59
11
16
18
25
33
42
56
73
84
94
119
175
200
235
285
330
390
60
63
63
62
63
69
69
69
69
69
69
72
72
74
75
75
75
High-output design
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
63 BB
71 BB
71 BC
80 C
90 LB
100 LB
112 MB
132 SBB
2790
2790
2790
2800
2840
2890
2835
2830
71.6
77.4
76.0
80.9
80.2
85.0
85.6
85.8
0.84
0.85
0.87
0.88
0.89
0.88
0.93
0.92
0.92
1.6
1.75
3.2
5.8
8.3
10.5
17.6
2820
2810
2810
2820
2870
2910
2865
2850
72.4
77.4
77.0
83.2
80.6
85.0
87.2
87.4
0.77
0.78
0.78
0.81
0.83
0.84
0.92
0.93
0.94
1.63
1.8
3.1
5.7
7.8
9.5
16.2
0.00036
0.00045
0.00045
0.00109
0.0027
0.005
0.012
0.02
4.9
6.5
6.5
11.5
18
25
33
50
54
58
58
60
68
68
63
69
11
1)
M3AA
132 SC
2815
87.0
0.93
21
2845
88.4
0.93
18.9
0.022
56
69
22
1)
M3AA
160 LB
2910
91.6
0.91
40
2925
92.4
0.90
37
0.058
100
69
30
M3AA
180 LB
2940
93.9
0.90
55
2950
93.8
0.87
52
0.092
137
70
45
M3AA
200 MLC
2945
94.0
0.89
82
2955
94.2
0.88
76
0.19
205
72
M3AA
200 MLD
2)
2)
2)
2)
2)
2)
2)
2)
0.2
215
0
74
55
1)
55
M3AA
225 SMC
2950
94.3
0.89
100
2965
94.7
0.88
92
0.29
260
75
M3AA
250 SMB
2965
94.7
0.90
134
2970
95.1
0.89
123
0.57
375
75
80
1)
M3AA
225 SMD
2)
2)
2)
2)
2)
2)
2)
2)
0.3
275
74
95
1)
M3AA
250 SMC
2)
2)
2)
2)
2)
2)
2)
2)
0.59
345
75
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
29
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
90 L
100 LA
100 LC
112 MA
112 M
132 S
132 M
160 M
160 L
180 M
180 L
200 MLB
225 SMA
225 SMB
250 SMA
280 SMA
280 SMB
Power
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
7.4
10
14.5
19.7
26.3
36
49
72
98
120
143
194
239
291
355
486
583
2.9
2.8
4.0
2.7
3.3
2.6
2.2
2.9
3.3
2.9
2.6
2.5
2.9
2.8
3.1
2.7
3.3
3.4
3.4
4.6
3.7
4.3
3.1
3.1
3.4
3.6
2.9
2.8
2.8
3.0
3.0
3.0
3.0
3.2
400 V 50 Hz
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
092 312-E
102 311-E
102 313-E
112 021-C
112 022-C
132 023-C
132 024-C
162 101-C
162 102-C
182 101-C
182 102-C
202 001-C
222 001-C
222 002-C
252 001-C
282 001-C
282 002-C
1420
1440
1450
1455
1455
1460
1450
1460
1460
1470
1470
1475
1480
1480
1480
1480
1475
83.9
85.6
86.8
87.5
88.3
89.3
90.1
92.0
91.8
92.3
93.1
93.4
93.6
94.2
94.6
94.8
95.0
Torque
Basic design
84.3
85.5
86.5
87.8
88.6
90.5
91.4
92.7
92.5
92.9
93.9
94.0
93.8
94.4
94.9
95.3
95.3
0.80
0.82
0.77
0.81
0.76
0.84
0.87
0.81
0.82
0.84
0.85
0.84
0.84
0.83
0.86
0.86
0.87
400 V 50 Hz
2.4
3.2
4.8
6.2
8.6
10.6
14
21.5
29
35
40
55
68
83
98
132
157
6.1
6.9
8.5
7.9
8.5
7.5
7.8
7.6
8.1
7.0
7.0
7.5
7.4
7.6
7.6
7.1
7.7
High-output design
0.25
M2VA
63 BB
3GVA
062 003-C
1370
70.3
67.4
0.67
0.78
3.2
1.75
2.5
2.1
0.45
M2VA
71 BB
3GVA
072 003-C
1390
75.5
75.3
0.76
1.15
4.1
3.11
2.1
2.3
0.55
0.95
1.1
1.85
2.2
4
5.5
9.2
11
18.5
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
71 C
80 C
80 C
90 L
90 LB
100 LC
112 MB
132 MBA
132 MB
160 LB
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
072 004-C
082 003-B
082 004-B
092 003-E
092 004-E
102 003-E
112 002-C
132 004-C
132 003-C
162 103-C
1410
1410
1390
1390
1390
1420
1425
1445
1450
1450
77.3
78.9
74.7
79.5
80.3
81.0
85.3
87.8
88.6
90.5
76.9
77.9
76.6
78.1
81.0
81.7
86.5
89.2
89.9
92.0
0.73
0.75
0.77
0.80
0.83
0.82
0.83
0.87
0.86
0.84
1.45
2.35
2.8
4.4
4.85
8.65
11.4
17.5
21
36
4.8
4.3
4.3
4.5
4.5
5.5
6.7
7.2
7.4
6.6
3.74
6.44
7.8
13
15
27
37
61
73
122
2.7
2.9
3.1
2.2
2.2
2.5
2.5
2.7
2.5
2.6
2.9
3.3
2.3
2.4
2.4
2.8
3.2
2.7
2.7
3.0
1)
M3AA
180 LB
3GAA
182 103-C
1465
92.5
93.3
0.84
56
6.8
196
2.5
2.8
M3AA
200 MLB
3GAA
202 002-C
1475
93.8
94.2
0.84
68
7.4
240
2.9
2.7
1)
M3AA
200 MLC
3GAA
202 003-C
1470
93.6
94.1
0.84
89
8.1
311
4.4
3.2
M3AA
225 SMC
3GAA
222 003-C
1480
94.6
95.0
0.84
100
7.5
356
3.5
3.0
M3AA
225 SMD
3GAA
222 004-C
1475
94.2
94.5
0.85
132
8.1
473
3.9
3.2
M3AA
250 SMB
3GAA
252 002-C
1480
94.6
95.1
0.86
132
6.9
486
2.6
3.0
M3AA
250 SMC
3GAA
252 003-C
1475
94.5
95.3
0.88
165
7.3
616
2.6
3.1
30
1)
1)
1)
1)
1)
1)
1)
37
48
55
73
1)
75
95
1)
2)
1)
30
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos
380 V 50 Hz
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
1410
1430
1440
1455
1455
1460
1450
1460
1455
1465
1465
1470
1475
1475
1475
1475
1470
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
90 L
100 LA
100 LC
112 MA
112 M
132 S
132 M
160 M
160 L
180 M
180 L
200 MLB
225 SMA
225 SMB
250 SMA
280 SMA
280 SMB
83.6
85.4
86.8
87.2
87.9
89.2
90.1
91.1
91.8
91.7
92.7
93.1
93.6
94.0
94.4
94.5
95.0
Current
IN
Speed
A
r/min
Efficiency
%
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.82
0.84
0.80
0.81
0.77
0.84
0.87
0.83
0.84
0.85
0.86
0.85
0.84
0.85
0.86
0.87
0.89
2.5
3.2
4.8
6.5
9
11
14.7
22.5
30
36
42
58
72
86
103
139
164
1430
1450
1460
1455
1455
1460
1450
1470
1465
1470
1475
1475
1480
1480
1480
1480
1475
84.4
86.1
86.9
87.8
88.6
89.4
90.2
91.6
91.9
92.2
93.3
93.5
93.8
94.2
94.5
94.8
95.1
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
Basic design
0.78
0.79
0.74
0.80
0.77
0.84
0.87
0.82
0.81
0.83
0.84
0.84
0.81
0.81
0.84
0.86
0.87
2.4
3.1
4.8
6.1
8.2
10.3
13.5
20.5
28
34
38
54
68
82
96
128
153
16
21
25
34
34
48
59
94
103
124
161
205
215
230
275
380
405
50
54
54
56
56
59
59
62
62
62
63
63
66
66
67
67
67
380 V 50 Hz
0.25
M2VA
63 BB
1360
70.9
0.71
0.76
1380
69.1
0.63
0.8
0.0003
40
0.45
M2VA
71 BB
1380
75.1
0.80
1.12
1400
74.0
0.72
1.2
0.00089
6.5
45
0.55
0.95
1.1
1.85
2.2
4
5.5
9.2
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
71 C
80 C
80 C
90 L
90 LB
100 LC
112 MB
132 MBA
1400
1400
1380
1380
1380
1410
1415
1445
77.0
79.1
74.3
78.8
78.4
80.0
84.7
88.0
0.77
0.81
0.82
0.83
0.85
0.82
0.85
0.87
1.4
2.3
2.7
4.4
5.1
8.8
11.7
18.4
1420
1430
1400
1400
1400
1420
1430
1445
76.1
76.4
74.1
79.5
80.8
82.0
85.5
88.3
0.69
0.66
0.72
0.76
0.80
0.75
0.79
0.87
1.5
2.65
2.9
4.35
4.9
8.7
11.4
16.8
0.0011
0.00195
0.00195
0.0043
0.0048
0.009
0.018
0.048
7
11
11
16
17
25
34
59
45
50
50
50
50
60
56
59
1)
1)
1)
1)
1)
415 V 50 Hz
0.0043
0.0069
0.009
0.018
0.018
0.038
0.048
0.091
0.102
0.161
0.225
0.34
0.37
0.42
0.72
0.88
0.95
High-output design
11
1)
M3AA
132 MB
1445
88.2
0.87
22
1455
88.6
0.83
21
0.048
59
59
18.5
1)
M3AA
160 LB
1440
89.8
0.85
37
1450
90.8
0.83
34
0.102
103
63
30
1)
M3AA
180 LB
1465
92.2
0.85
58
1470
92.7
0.82
55
0.225
161
63
M3AA
200 MLB
1475
93.5
0.85
71
1475
93.9
0.82
67
0.34
205
63
1)
M3AA
200 MLC
2)
2)
2)
2)
2)
2)
2)
2)
0.38
270
63
M3AA
225 SMC
1475
94.3
0.84
105
1480
94.6
0.82
99
0.49
265
66
M3AA
225 SMD
2)
2)
2)
2)
2)
2)
2)
2)
0.56
290
66
M3AA
250 SMB
1475
94.3
0.87
139
1480
94.8
0.86
128
0.88
335
67
M3AA
250 SMC
2)
2)
2)
2)
2)
2)
2)
2)
0.95
360
67
37
48
55
73
1)
75
95
1)
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
31
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
Power
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Torque
Basic design
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 S
132 MA
132 MB
160 M
160 L
180 L
200 MLA
200 MLB
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
063 001-C
063 002-C
073 001-C
073 002-C
083 001-B
083 002-B
093 001-E
093 002-E
103 001-E
113 001-C
133 001-C
133 002-C
133 003-C
163 101-C
163 102-C
183 101-C
203 001-C
203 002-C
910
910
920
920
925
925
930
930
950
940
960
960
955
970
970
970
985
980
47.1
57.5
61.1
64.9
72.9
73.3
71.5
74.4
80.0
80.5
84.5
85.5
86.0
89.3
89.8
90.8
91.1
91.7
42.5
54.0
57.7
62.3
70.8
71.9
70.7
72.5
77.0
81.0
84.8
86.1
87.0
90.4
90.5
91.5
91.7
92.2
0.56
0.58
0.69
0.65
0.72
0.71
0.67
0.69
0.71
0.74
0.75
0.78
0.78
0.79
0.78
0.78
0.81
0.81
0.51
0.54
0.64
0.86
1.04
1.55
2.36
3.25
3.92
5.4
6.9
8.7
11.9
15.4
23
31
36
43
2.1
2.1
2.9
3.2
3.8
3.4
4.0
4.0
4.5
5.6
6.5
7.1
6.6
6.6
6.9
6.8
7.0
6.8
0.95
1.27
1.88
2.61
3.82
5.68
7.5
11
15
22
30
40
55
74
109
147
180
214
2.1
2.1
2.1
2.5
3.1
2.9
1.9
2.1
1.9
2.1
2.1
2.6
2.1
1.9
2.1
2.0
2.7
2.9
2.1
2.1
2.2
2.7
3.4
3.1
2.3
2.4
2.3
2.7
3.0
2.8
2.8
2.6
3.4
3.3
2.5
3.0
30
M3AA
225 SMB
3GAA
223 001-C
985
92.8
93.0
0.83
56
7.2
291
3.1
2.9
37
45
45
M3AA
M3AA
M3AA
250 SMA
280 SMA
280 SMA
3GAA
3GAA
3GAA
253 001-C
283 001-C
283 001-C
985
985
985
93.4
93.4
93.4
93.7
93.7
93.7
0.83
0.84
0.84
69
83
83
7.3
7.2
7.2
358
436
436
3.1
3.2
3.2
2.8
2.8
2.8
1)
1)
1)
400 V 50 Hz
High-output design
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
63 BB
71 C
71 C
80 C
90 LB
100 LC
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
063 003-C
073 003-C
073 004-C
083 003-B
093 003-E
103 002-E
900
920
900
920
910
940
56.9
64.8
60.1
67.9
69.0
77.0
52.1
61.6
60.4
70.5
69.0
72.8
0.54
0.63
0.70
0.76
0.71
0.71
0.74
1.15
1.2
2.1
3.85
5.9
2.2
3.2
2.6
3.4
4.0
4.5
1.61
3.33
4.1
8.1
13.5
22
2.2
2.6
2.2
2.4
1.9
1.9
2.3
2.8
2.0
2.2
2.2
2.3
1)
M3AA
112 MB
3GAA
113 002-C
935
80.0
81.2
0.76
7.2
5.5
31
2.5
2.7
6.3
1)
M3AA
132 MC
3GAA
133 004-C
960
84.9
85.0
0.75
14.5
7.3
63
2.3
3.1
14
1)
M3AA
160 LB
3GAA
163 103-C
960
89.8
90.1
0.77
29.5
7.0
138
2.5
3.1
18.5
1)
M3AA
180 LB
3GAA
183 102-C
965
90.7
91.7
0.80
37
6.1
183
2.1
2.5
30
1)
M3AA
200 MLC
3GAA
203 003-C
980
91.9
92.5
0.81
56
7.1
293
3.3
2.9
M3AA
225 SMC
3GAA
223 002-C
985
92.8
93.4
0.83
69
6.9
360
3.0
2.9
1)
M3AA
250 SMB
3GAA
253 002-C
985
93.4
93.7
0.84
83
7.2
436
3.2
2.8
37
45
1)
2)
32
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos
380 V 50 Hz
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
45
905
905
910
910
905
905
920
920
940
930
955
955
950
960
960
970
980
980
985
985
985
985
1)
M2VA
M2VA
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 S
132 MA
132 MB
160 M
160 L
180 L
200 MLA
200 MLB
225 SMB
250 SMA
280 SMA
280 SMA
49.6
59.1
60.3
65.4
72.7
73.1
70.6
73.9
79.0
80.0
84.0
85.0
85.5
88.7
89.4
90.9
90.8
91.6
92.6
93.3
93.5
93.5
380 V 50 Hz
0.15
0.32
0.37
0.75
Current
IN
Speed
A
r/min
Efficiency
%
Power
factor
cos
Current
IN
A
0.52
0.54
0.62
0.61
0.66
0.65
0.64
0.66
0.67
0.71
0.72
0.75
0.76
0.77
0.76
0.74
0.78
0.79
0.82
0.81
0.83
0.83
0.55
0.57
0.7
0.9
1.1
1.65
2.36
3.25
3.95
5.4
6.9
8.7
11.8
15.1
22.5
30.5
36
42
55
67
81
81
415 V 50 Hz
0.59
0.61
0.73
0.68
0.77
0.77
0.72
0.73
0.74
0.78
0.77
0.81
0.81
0.80
0.80
0.79
0.81
0.81
0.83
0.84
0.84
0.84
0.46
0.52
0.62
0.85
1.03
1.5
2.3
3.2
3.96
5.4
7.1
8.9
12.2
16.1
23.5
32
38
45
59
72
87
87
925
925
930
930
920
915
930
930
960
950
965
965
960
970
970
975
985
985
985
990
985
985
44.9
54.8
59.8
63.6
71.4
71.2
70.6
74.2
80.0
80.5
84.0
85.5
86.0
89.6
90.0
91.1
91.1
91.8
92.9
93.5
93.6
93.6
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
Basic design
415 V 50 Hz
0.0002
0.00027
0.00063
0.00081
0.00184
0.00218
0.0032
0.0043
0.0082
0.015
0.031
0.038
0.045
0.089
0.107
0.217
0.37
0.43
0.64
1.16
1.49
1.49
4
4.5
5.5
6.5
9
10
13
16
23
27
39
46
54
88
102
151
165
185
225
280
375
375
38
38
42
42
47
47
44
44
49
54
61
61
61
59
59
59
63
63
63
63
63
63
High-output design
M2VA
M2VA
M2VA
M2VA
63 BB
71 C
71 C
80 C
895
910
880
900
55.9
65.6
59.1
66.9
0.59
0.67
0.75
0.80
0.71
1.1
1.25
2.1
915
930
920
930
53.9
63.3
59.8
67.6
0.52
0.59
0.66
0.72
0.8
1.2
1.2
2.2
0.00032
0.0011
0.0011
0.00258
5
7
7
10
38
42
42
47
1.3
1)
M3AA
90 LB
900
69.0
0.75
3.8
920
69.0
0.67
3.9
0.0048
18
44
2.2
1)
M3AA
100 LC
930
76.0
0.75
5.9
940
77.0
0.67
5.9
0.009
26
49
1)
M3AA
112 MB
925
79.5
0.79
7.3
940
80.0
0.73
7.2
0.018
33
54
6.3
1)
M3AA
132 MC
960
84.8
0.75
14.5
965
84.6
0.71
14.4
0.049
59
61
14
1)
M3AA
160 LB
955
89.7
0.79
30.5
965
89.6
0.75
29.5
0.127
117
62
18.5
1)
M3AA
180 LB
960
90.1
0.82
38
970
90.9
0.79
36
0.237
160
59
30
1)
M3AA
200 MLC
980
91.7
0.83
57
985
92.1
0.83
52
0.49
200
63
M3AA
225 SMC
980
92.6
0.83
72
985
93.2
0.81
68
0.75
252
63
1)
M3AA
250 SMB
985
93.5
0.84
87
985
93.6
0.83
81
1.49
320
63
37
45
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
33
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
0.055
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
37
M2VA
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 MA
160 M
160 L
180 MLA
200 MLA
225 SMA
225 SMB
250 SMA
280 SMA
280 SMA
1)
1)
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
0.48
0.57
0.55
0.60
0.62
0.56
0.57
0.59
0.64
0.65
0.67
0.68
0.69
0.70
0.70
0.68
0.82
0.79
0.77
0.79
0.81
0.81
0.45
0.52
0.69
0.75
0.85
1.6
2.35
2.55
3.35
4.5
5.9
7.8
10
13.4
18.1
26.4
29
37
45
59
74
74
1.8
2.2
2.2
3.1
3.1
3.0
3.0
3.5
3.5
4.1
5.3
5.5
5.1
5.5
5.4
4.4
7.5
6.8
6.4
7.3
7.4
7.4
2.1
2.3
2.5
3.2
2.9
1.9
1.7
2.1
2.1
1.9
1.9
2.4
2.1
2.4
2.4
1.5
3.0
2.8
2.4
2.2
2.0
2.9
2.1
2.3
2.5
3.6
3.1
2.4
2.1
2.7
2.7
2.5
2.5
2.6
2.6
2.6
2.7
2.0
3.2
3.1
2.6
2.6
2.6
3.1
400 V 50 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
064 002-C
074 001-C
074 002-C
084 001-B
084 002-B
094 001-E
094 002-E
104 001-E
104 002-E
114 001-C
134 001-C
134 002-C
164 101-C
164 102-C
164 103-C
184 103-C
204 001-C
224 001-C
224 002-C
254 001-C
284 001-C
284 001-C
Power
680
690
690
700
700
700
690
700
700
695
720
720
715
710
715
728
740
730
730
735
735
735
38.3
45.8
46.4
59.9
70.7
61.5
62.9
72.0
73.0
74.5
80.5
82.0
84.1
84.7
86.3
88.9
91.1
91.1
91.5
92.8
93.0
93.0
Torque
Basic design
31.8
37.5
38.1
54.5
67.4
43.4
56.4
63.6
68.8
74.6
80.2
82.0
84.7
85.6
87.3
89.7
91.6
91.6
92.2
93.1
93.3
93.3
400 V 50 Hz
0.78
1.25
1.67
2.46
3.52
5
7.5
10
15
21
29
40
53
74
100
144
196
242
287
389
479
478
High-output design
M2VA
M2VA
M3AA
M3AA
71 C
80 C
90 LB
100 LC
3GVA
3GVA
3GAA
3GAA
074 003-C
084 003-B
094 003-E
104 003-E
680
690
680
670
51.3
64.6
64.0
71.0
49.9
65.3
60.0
65.9
0.61
0.69
0.60
0.70
0.8
1.2
3.1
4.4
2.2
3.0
3.0
3.3
2.6
5.3
10
21
2.5
2.3
1.8
1.8
2.2
2.1
2.0
2.2
1.9
1)
M3AA
112 MB
3GAA
114 002-C
690
74.0
74.8
0.67
5.6
4.3
26.5
2.0
2.6
3.8
1)
M3AA
132 MB
3GAA
134 003-C
710
80.5
80.7
0.69
9.9
5.2
51
2.3
2.6
8.5
1)
M3AA
160 LB
3GAA
164 104-C
700
85.1
85.7
0.70
21
5.3
114
2.3
2.6
M3AA
200 MLB
3GAA
204 002-C
735
91.4
91.8
0.81
36
7.3
241
2.6
3.1
M3AA
225 SMC
3GAA
224 003-C
735
90.5
91.3
0.79
64
6.7
391
2.5
3.0
M3AA
250 SMB
3GAA
254 002-C
735
93.0
93.3
0.81
74
7.4
479
2.0
2.6
18.5
30
37
1)
2)
1)
34
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos
380 V 50 Hz
0.055
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
37
675
680
680
690
675
690
680
690
700
685
715
715
710
705
710
725
735
730
730
735
735
735
M2VA
M2VA
M2VA
M2VA
M2VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 MA
160 M
160 L
180 MLA
200 MLA
225 SMA
225 SMB
250 SMA
280 SMA
280 SMA
41.2
46.3
47.7
61.1
70.2
62.7
64.9
72.0
74.0
74.0
80.0
82.0
83.5
84.0
85.7
88.5
91.0
91.0
91.0
92.6
92.5
92.5
Current
IN
Speed
A
r/min
Efficiency
%
Power
factor
cos
Current
IN
A
Moment
Sound
of inertia
pressure
J=1/4 GD2 Weight level LP
kgm2
kg
dB(A)
0.44
0.53
0.53
0.57
0.58
0.54
0.55
0.55
0.60
0.61
0.65
0.68
0.66
0.68
0.68
0.66
0.79
0.76
0.76
0.77
0.81
0.81
0.5
0.55
0.7
0.77
0.87
1.7
2.43
2.7
3.5
4.7
5.9
7.7
9.9
13.3
17.8
26.3
29
36
44
58
73
73
0.00027
0.00063
0.00081
0.00184
0.00218
0.0032
0.0043
0.0069
0.0082
0.016
0.038
0.045
0.072
0.091
0.131
0.24
0.45
0.61
0.68
1.25
1.52
1.52
415 V 50 Hz
0.50
0.60
0.59
0.64
0.66
0.59
0.61
0.63
0.68
0.69
0.71
0.72
0.71
0.72
0.72
0.7
0.83
0.79
0.81
0.81
0.82
0.82
0.41
0.5
0.65
0.7
0.84
1.57
2.27
2.5
3.3
4.6
5.9
7.8
10.2
13.8
18.6
27.1
30
39
47
61
77
77
380 V 50 Hz
690
700
700
705
690
700
690
700
710
700
725
720
720
715
715
730
740
735
735
740
735
735
35.7
43.8
44.4
57.8
69.6
60.5
61.5
71.0
73.0
74.0
80.0
82.0
84.1
85.0
86.6
89.1
91.2
91.3
91.7
92.7
92.8
92.8
Basic design
415 V 50 Hz
M2VA
M2VA
71 C
80 C
670
670
52.3
63.1
0.65
0.72
0.8
1.2
700
700
51.4
65.1
4.5
5.5
6.5
9
10
13
16
20
23
28
46
53
75
88
118
155
175
210
225
280
375
375
36
40
40
45
45
43
43
46
46
52
56
56
59
59
59
62
60
63
63
63
63
63
High-output design
0.58
0.66
0.8
1.3
0.0011
0.00258
7
11
40
45
0.75
1)
M3AA
90 LB
670
64.0
0.69
690
63.0
0.61
3.2
0.0048
18
43
1.5
1)
M3AA
100 LC
660
71.0
0.73
4.5
675
70.0
0.65
4.6
0.009
26
46
1.9
1)
M3AA
112 MB
680
73.8
0.71
5.9
695
73.6
0.65
5.8
0.018
33
52
3.8
1)
M3AA
132 MB
705
80.0
0.72
10
715
80.5
0.67
9.9
0.049
59
56
8.5
1)
M3AA
160 LB
695
84.6
0.73
21.5
705
85.3
0.68
20.5
0.131
118
62
M3AA
200 MLB
735
91.2
0.83
37
735
91.6
0.79
35
0.54
200
60
M3AA
225 SMC
730
90.4
0.80
65
735
90.9
0.77
63
0.8
255
63
M3AA
250 SMB
735
92.5
0.82
77
735
92.8
0.81
73
1.52
320
63
18.5
30
37
1)
Recalculation factors
Recalculation factors for current at rated voltages other than 400 V 50 Hz.
Rated voltage at 50 Hz and motor wound for
Recalculation factor
Recalculation factor
220 V
1.82
500 V
0.80
230 V
415 V
1.74
0.96
660 V
690 V
0.61
0.58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
35
Efficiency
Output Motor type
kW
Product code
1.5
2.2
3
4
5.5
M3AA
M3AA
M3AA
M3AA
M3AA
7.5
11
15
18.5
22
30
37
45
55
75
90 L
90 LB
100 LB
112 M
132 SA
Full
3/4
Speed load
load
r/min
100% 75%
Current
Power
Is
factor IN
cos
100% A
IN
Torque
TN
Ts
Nm
TN
Moment
Sound
Tmax of inertia
pressure
J=1/4 GD2 Weight level LP
TN
kgm2
kg
dB(A)
400 V 50 Hz
85.9
85.8
87.6
87.6
88.6
86.5
87.1
87.5
89.2
89.6
0.87
0.87
0.86
0.93
0.88
3
4.4
5.9
7.1
10.3
7.7
7.4
10.0
7.5
9.7
5
7.3
9.9
13.4
18.1
2.7
3.0
3.9
2.6
3.8
3.6
3.6
4.9
3.4
4.3
0.002
0.002
0.005
0.012
0.016
16
18
25
33
42
63
63
62
63
69
M3AA 132 SB
91.0
91.4
0.90
13.3
11.0
24.6 5.1
5.2
0.022
56
69
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
92.1
92.9
93.2
93.6
93.8
94.6
94.7
94.8
95.4
92.3
93.1
93.4
93.9
93.8
94.6
94.7
94.6
95.8
0.90
0.90
0.89
0.91
0.90
0.89
0.88
0.91
0.93
19.2
26
32.5
37.5
52
64
78
93
124
7.4
8.0
8.3
7.1
7.9
8.8
6.9
7.5
7.5
36
49
60
71
97
120
145
177
242
3.1
3.3
3.3
2.9
2.9
3.3
2.9
3.0
2.7
0.047
0.053
0.058
0.092
0.18
0.19
0.29
0.57
0.6
84
94
100
137
200
205
260
330
345
69
69
69
70
72
72
74
75
75
091 312-C
091 313-C
101 312-C
111 022-C
131 023-C
Basic design
2900
2880
2920
2860
2900
160 MA
160 M
160 L
180 M
200 MLB
200 MLC
225 SMC
250 SMB
250 SMC
3GAA
3GAA
3GAA
3GAA
3GAA
161 121-C
161 122-C
161 123-C
181 121-C
201 021-C
201 022-C
221 021-C
251 021-C
251 022-C
2935
2940
2935
2945
2950
2960
2970
2970
2965
2.7
3.0
3.1
2.7
3.0
3.6
2.3
2.5
2.3
400 V 50 Hz
Basic design
1.1
M3AA 90 L
83.9
84.3
0.80
2.4
6.1
7.4
2.9
3.4
0.0043
16
1.5
M3AA 100 LA
85.6
85.5
0.82
3.2
6.9
10
2.8
3.4
0.0069
21
54
2.2
M3AA 100 LC
86.8
86.5
0.77
4.8
8.5
14.5 4.0
4.6
0.009
25
54
M3AA 100 LD
87.4
87.0
0.77
6.5
8.2
19.7 3.6
4.3
0.011
29
40
M3AA 112 MA
87.5
87.8
0.81
6.2
7.9
19.7 2.7
3.7
0.018
34
56
M3AA 112 M
87.8
88.4
0.76
8.6
8.5
26.3 3.3
4.3
0.018
34
56
5.5
M3AA 132 S
89.3
90.5
0.84
10.6
7.5
36
2.6
3.1
0.038
48
59
7.5
M3AA 132 M
90.3
91.7
0.87
14
7.8
49
2.2
3.1
0.048
59
59
11
M3AA 160 M
92.0
92.5
0.83
21
7.7
72
3.2
3.2
0.091
94
62
15
M3AA 160 L
92.1
92.5
0.83
28.5
7.6
98
3.3
3.1
0.102
103
62
18.5
M3AA 180 M
93.3
93.9
0.84
34
6.6
121
2.7
2.8
0.191
141
62
22
M3AA 180 L
93.9
94.3
0.84
41
7.8
143
3.1
3.4
0.225
161
62
30
94.2
94.4
0.84
55
8.0
194
4.0
3.1
0.34
205
63
37
94.3
94.4
0.85
68
7.4
239
2.8
3.0
0.42
230
66
45
95.0
95.0
0.86
80
8.0
291
3.8
3.2
0.49
265
66
55
95.1
95.3
0.87
96
7.4
356
3.0
3.1
0.88
335
67
55
75
95.1
95.3
95.1
95.3
0.86
0.85
98
135
8.5
8.2
355
484
4.3
3.2
3.8
3.6
0.56
0.95
290
360
66
66
50
36
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Efficiency
Output Motor type
kW
Product code
M3AA
M3AA
M3AA
M3AA
M3AA
11
15
18.5
22
30
37
112 M
132 S
132 MA
132 MB
160 M
Full
3/4
Speed load
load
r/min
100% 75%
Current
Power
factor IN
Is
cos
100% A
IN
Torque
TN
Ts
Nm
TN
Moment
Sound
Tmax of inertia
pressure
J=1/4 GD2 Weight level LP
TN
kgm2
kg
dB(A)
400 V 50 Hz
945
965
960
960
975
83.6
86.7
87.4
87.0
90.7
84.2
87.1
88.2
87.6
91.1
0.76
0.79
0.80
0.78
0.77
5.1
6.4
8.3
12
15.6
6.0
7.0
7.0
7.3
7.8
22.3
29.8
39.8
54
74
2.4
2.2
2.9
3.5
2.4
2.9
2.8
2.7
3.0
3.3
0.018
0.038
0.045
0.049
0.107
33
46
54
59
102
54
61
61
61
59
M3AA 160 L
90.9
91.5
0.78
23
6.8
108
2.3
2.8
0.127
117
61
M3AA
M3AA
M3AA
M3AA
M3AA
3GAA
3GAA
3GAA
3GAA
3GAA
183 121-C
203 021-C
203 022-C
223 021-C
253 021-C
970
985
985
985
985
92.2
92.4
92.9
93.6
94.4
92.4
92.4
93.0
93.8
94.4
0.75
0.81
0.82
0.83
0.82
31
36
42
56
69
8.3
8.3
8.3
7.5
7.4
147
180
214
291
358
2.8
3.7
4.0
3.8
3.3
3.9
3.3
3.0
2.8
2.8
0.237
0.43
0.49
0.75
1.49
160
185
200
252
320
3GAA
3GAA
3GAA
3GAA
114 022-C
134 023-C
134 024-C
164 121-C
695
720
715
720
74.6
83.7
82.8
86.3
75.5
83.3
83.1
87.1
0.69
0.67
0.70
0.69
4.1
5.9
7.8
9.8
4.0
5.4
5.2
5.0
20.8
29.2
40.1
53
1.6
1.9
2.1
2.1
2.2
2.7
2.5
2.5
0.018
0.045
0.049
0.091
33
53
59
88
1)
180 L
200 MLB
200 MLC
225 SMC
250 SMB
3GAA
3GAA
3GAA
3GAA
3GAA
113 022-C
133 024-C
133 025-C
133 026-C
163 121-C
Basic design
400 V 50 Hz
1)
1)
1)
Basic design
1.5
2.2
3
4
M3AA
M3AA
M3AA
M3AA
5.5
M3AA 160 M
86.9
87.3
0.66
14.1
5.8
73
2.4
3.1
0.131
118
1)
7.5
M3AA 160 L
87.0
87.7
0.70
18.2
5.4
100
2.1
2.7
0.131
118
1)
15
92.1
92.5
0.81
29
7.9
195
3.2
3.3
0.54
200
1)
18.5
92.4
92.8
0.76
38
6.6
241
2.5
3.0
0.68
225
1)
22
30
92.5
93.6
92.8
94.0
0.75
0.78
46
60
7.1
7.5
286
389
3.0
2.8
3.3
3.3
0.8
1.52
255
320
1)
1)
112 M
132 S
132 M
160 MA
59
1)
1)
1)
1)
1)
On request.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
37
Current in A1) at
Output in kW
50 Hz
Product code
Design 3)
60 Hz
Motor type
3GAA
Speed in r/min
440-480
380-420 V 440-480 V 380-420 V 440-480 V 380-420 V V
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
4
4
5.5
5.5
5.5
7.5
7.5
9.2
11
4.6
4.6
6.4
6.4
6.4
8.6
8.6
10.6
12.6
4)
2)
HO
4)
4)
2)
2)
HO
HO
M2AA 112 M
M3AA 112 M
M3AA 112 MB
M2AA 132 SA
M3AA 132 SA
M2AA 132 SB
M3AA 132 SB
M3AA 132 SBB
M3AA 132 SC
111 001-A
111 022-C
111 002-C
131 001-A
131 023-C
131 002-A
131 024-C
131 004-C
131 003-C
7.8
7.6
10.5
10.9
10.7
14.7
13.9
17.6
21
7.7
7.4
10.4
11
10.7
14.4
13.8
17.3
20
2850
2860
2855
2855
2900
2855
2915
2840
2835
3450
3460
3455
3455
3500
3455
3515
3440
3445
0.91
0.93
0.93
0.88
0.88
0.90
0.90
0.92
0.93
0.91
0.93
0.93
0.88
0.87
0.90
0.89
0.92
0.93
M3AA 112 MA
M2AA 112 M
M3AA 112 M
112 021-C
112 001-A
112 022-C
6.5
8.9
9
6.4
8.6
8.6
1450
1435
1455
1750
1735
1755
0.81
0.80
0.76
0.8
0.81
0.76
3.5
4.6
4.6
4)
5.5
6.4
2)
5.5
6.4
4)
5.5
6.4
HO
4)
M3AA 112 MB
112 002-C
11.7
11.6
1425
1725
0.83
0.83
M2AA 132 S
132 001-A
11.5
11.5
1450
1750
0.83
0.83
M3AA 132 S
132 023-C
11.1
11.1
1460
1760
0.84
0.84
M2AA 132 M
132 002-A
15.3
15.1
1450
1750
0.83
0.83
M3AA 132 M
132 024-C
14.6
14.3
1450
1750
0.87
0.86
7.5
8.6
7.5
8.6
9.2
10.6
2)
HO
132 004-C
18.4
18.2
1445
1745
0.87
0.87
11
12.6
2)
HO
M3AA 132 MB
132 003-C
22
22
1450
1750
0.86
0.86
) Recalculation factors
Multiple by 1.73 when recalculating:
from 380-420 V to 220-240 V 50 Hz
from 440-480 V to 250-280 V 50 Hz
2
) Class F temperature rise
3
) High-output design.
4
) Efficiency class EFF2.
38
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
at the rated output. The power factor and speed specified on the rating plate apply at the average voltage
within the range.
Current in A1) at
Output in kW
50 Hz
60 Hz
Product code
Design 3)
Motor type
3GAA
Speed in r/min
440-480
380-420 V 440-480 V 380-420 V 440-480 V 380-420 V V
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
2.5
3.5
3.5
4.6
6.4
7.5
HO
HO
M3AA 112 M
M3AA 112 MB
M3AA 132 S
M3AA 132 MA
M3AA 132 MB
M3AA 132 MC
113 001-C
113 002-C
133 001-C
133 002-C
133 003-C
133 004-C
5.4
7.3
7.1
8.9
12.2
15.2
5.3
7.3
7.0
8.9
12.2
14.9
940
935
960
960
955
960
1140
1135
1160
1160
1155
1160
0.74
0.76
0.75
0.78
0.78
0.75
0.74
0.75
0.75
0.78
0.78
0.76
M3AA 112 M
M3AA 112 MB
M3AA 132 S
M3AA 132 M
M3AA 132 MB
114 001-C
114 002-C
134 001-C
134 002-C
134 003-C
4.6
6
5.9
7.8
10
4.4
6
5.9
7.8
10
695
685
720
720
710
845
835
870
870
860
0.65
0.67
0.67
0.68
0.69
0.65
0.66
0.66
0.68
0.69
1.7
2.3
2.5
3.5
4.4
HO
HO
) Recalculation factors.
Multiply by 1.73 when recalculating:
from 380-420 V to 220-240 V 50 Hz
from 440-480 V to 250-280 V 60 Hz
2
) Class F temperature rise.
3
) High-output design.
4)
Efficiency class EFF2.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
39
Motor type
Product code
Speed
r/min
Efficiency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
400 V 50 Hz
0.65/0.14
M3VA 80 A
2860/1450
73.0/57.0 0.85/0.57
1.5/0.58 4.8/3.6
2.2/2.3
0.0008
0.95/0.2
M3VA 80 B
2850/1440
75.0/61.0 0.87/0.69
2.1/0.7
3.19/1.33 2.0/1.8
2.2/2.2
0.0009
11
1.1/0.25
M3VA 80 C
2860/1440
77.0/63.0 0.87/0.70
2.4/0.85 5.3/3.8
3.7/1.7
2.0/1.8
2.2/2.0
0.0012
12
1.4/0.22
M3AA 90 S
2870/1470
77.0/48.0 0.87/0.63
3/1.1
5.3/3.3
4.6/1.4
1.7/1.0
2.4/2.3
0.0019
13
1.9/0.3
M3AA 90 L
2880/1470
78.0/53.0 0.87/0.68
4/1.1
5.8/3.7
6.3/1.9
1.9/1.0
2.5/2.3
0.0024
16
2.5/0.4
M3AA 100 L
2900/1470
80.0/60.0 0.87/0.67
5.2/1.5
6.5/4.1
8.2/2.6
2.1/1.0
3.0/2.7
0.0041
21
3.5/0.6
M3AA 112 M
2895/1470
83.0/68.0 0.92/0.60
6.6/2.1
7.0/5.8
11.5/3.9
1.7/1.8
2.3/2.8
0.012
32
5.5/1
M3AA 132 S
2900/1470
84.0/64.0 0.88/0.65
10.8/3.5 7.8/5.7
18.1/6.5
2.4/2.0
2.9/2.8
0.016
42
7.4/1.2
M3AA 132 M
2875/1475
85.0/67.0 0.93/0.64
13.5/4.1 7.5/5.9
24.6/7.8
2.1/2.0
2.6/2.8
0.022
56
13/1.9
M3AA 160 M
2940/1470
88.5/79.5 0.92/0.79
23/4.4
7.8/6.4
42/12
2.1/2.1
3.0/2.5
0.054
92
17.5/2.5
M3AA 160 L
2925/1475
89.0/81.0 0.92/0.77
31/5.8
7.1/6.7
57/16
2.0/2.5
2.6/2.9
0.057
99
20/2.8
M3AA 180 M
2930/1465
89.0/77.0 0.90/0.77
36/6.9
6.4/5.8
65/18
2.1/1.9
2.4/2.0
0.094
132
25/3.6
M3AA 180 L
2940/1465
90.0/78.0 0.88/0.78
46/8.6
7.5/7.3
81/24
2.6/1.9
2.9/1.9
0.108
152
30/4.1
2945/1480
91.5/85.0 0.89/0.72
54/10
8.0/7.1
97/26
2.2/2.7
2.8/2.8
0.15
175
38/5.5
2945/1480
92.5/86.5 0.91/0.74
67/13
7.7/6.8
123/35
2.2/2.6
2.6/2.6
0.19
205
43/6
2950/1475
92.5/86.5 0.90/0.78
75/13
7.1/5.8
139/39
2.3/2.7
2.4/2.0
0.26
235
50/7
2955/1480
93.0/87.5 0.91/0.78
86/15
7.3/6.1
162/45
2.4/2.9
2.4/2.1
0.29
260
70/10
2965/1485
94.0/89.5 0.90/0.76
119/22
9.3/7.1
225/64
2.3/2.5
3.1/2.3
0.57
330
5.0/3.7
400 V 50 Hz
0.22/0.044
M3VA 63 A
2770/1420
65.0/50.0 0.76/0.65
0.65/0.2 3.6/3.5
2.2/2.5
0.00019
0.33/0.07
M3VA 63 B
2700/1380
53.0/45.0 0.82/0.77
1.1/0.3
2.7/2.7
1.17/0.49 1.6/2.0
1.7/2.1
0.00026
4.5
0.37/0.08
M3VA 71 A
2690/1460
64.0/42.0 0.92/0.47
0.9/0.6
3.3/4.3
1.31/0.52 1.8/2.1
1.9/2.2
0.00066
5.5
0.55/0.12
M3VA 71 B
2700/1470
67.0/55.0 0.91/0.42
1.3/0.75 3.8/3.4
1.94/0.78 1.4/2.2
1.5/2.2
0.00089
6.5
0.65/0.13
M3VA 71 C
2800/1400
69.0/50.0 0.85/0.44
1.6/0.85 4.1/3.5
2.2/0.88
1.5/2.3
1.6/2.4
0.0011
0.85/0.2
M3VA 80 A
2850/1440
77.0/65.0 0.85/0.64
1.9/0.7
2.86/1.33 2.1/2.3
2.3/2.6
0.0008
1.1/0.25
M3VA 80 B
2855/1450
79.0/68.0 0.84/0.63
2.4/0.85 5.3/4.2
3.7/1.65
2.3/2.5
2.5/2.7
0.0009
11
1.4/0.35
M3VA 80 C
2845/1440
79.0/70.0 0.85/0.67
3/1.1
5.4/4.4
4.7/2.32
2.3/2.4
2.4/2.6
0.0012
11
1.5/0.33
M3AA 90 S
2860/1460
77.0/66.0 0.87/0.67
3.3/1.1
5.2/3.9
5.2/1
1.8/1.1
2.4/2.1
0.0019
13
2.2/0.45
M3AA 90 L
2860/1460
80.0/73.0 0.88/0.65
4.6/1.4
5.9/4.4
7.3/2.9
2.1/1.2
2.6/2.3
0.0024
16
2.5/0.47
M3AA 90 LB
2860/1460
78.0/75.0 0.88/0.62
5.2/1.5
6.1/4.5
8.3/3.1
2.2/1.4
2.5/2.3
0.0027
18
3/0.6
M3AA 100 L
2880/1470
81.0/74.0 0.89/0.61
6.2/1.9
6.3/4.8
9.9/3.9
2.2/1.4
2.8/2.8
0.0041
21
4.5/1
M3AA 112 M
2875/1450
83.0/80.0 0.93/0.76
8.4/2.4
7.0/6.0
14.9/6.6
1.8/1.9
2.3/2.8
0.012
32
6.2/1.3
M3AA 132 S
2880/1455
84.0/80.0 0.91/0.67
11.8/3.5 7.0/6.5
20.6/8.5
2.0/2.6
2.6/3.3
0.016
42
8.3/1.7
M3AA 132 M
2875/1455
84.0/82.0 0.93/0.71
15.4/4.2 7.4/6.6
27.6/11.2 2.5/2.7
2.7/3.3
0.022
56
10/2
M3AA 160 MA
2910/1465
85.0/83.5 0.89/0.73
19/4.8
5.9/6.1
30/43
1.5/2.4
2.3/2.8
0.039
73
16/3.2
M3AA 160 M
2915/1465
87.5/86.5 0.92/0.76
28.5/7
6.6/6.3
52/21
1.8/2.5
2.4/2.8
0.054
92
19.5/4.5
M3AA 160 L
2930/1465
89.0/88.0 0.89/0.77
36/9.7
7.6/6.4
64/29
2.3/2.5
2.9/2.8
0.057
99
21.5/4.7
M3AA 180 M
2935/1465
90.0/88.0 0.91/0.77
38/10
7.0/5.3
70/28
2.1/2.1
2.6/2.3
0.094
132
26/5.2
M3AA 180 L
2940/1470
90.5/89.5 0.89/0.75
47/11
6.9/5.8
85/34
2.3/2.4
2.6/2.4
0.108
152
32/8
2940/1465
90.0/89.5 0.89/0.85
58/16
7.1/6.2
104/52
2.0/2.0
2.5/2.2
0.28
180
39/10
2950/1475
91.5/91.0 0.89/0.85
69/19
7.4/6.2
126/65
2.0/2.0
2.6/2.3
0.34
205
42/11
2950/1470
92.5/91.0 0.89/0.77
75/23
7.7/5.6
136/71
2.2/2.1
3.0/2.5
0.19
205
45/13
2955/1475
93.0/91.5 0.92/0.82
76/25
7.4/5.3
145/84
2.0/2.0
2.6/2.1
0.27
235
55/15
2955/1475
93.5/92.5 0.91/0.82
94/29
7.3/5.4
178/97
2.0/2.0
2.6/2.2
0.3
260
75/25
2965/1475
94.5/93.0 0.92/0.82
125/48
8.9/5.5
241/162
2.3/2.0
3.1/2.2
0.36
330
5.0/4.1
40
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Motor type
Product code
Speed
r/min
Efficiency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
400 V 50 Hz
0.18/0.025
M3VA 71 A
1420/710
50.0/26.0 0.76/0.60
0.7/0.35 2.7/2.1
1.9/3.9
0.00066 5.5
0.3/0.05
M3VA 71 B
1400/700
54.0/34.0 0.80/0.60
1/0.45
2.1/0.69
1.5/2.8
1.7/2.8
0.00089 6.5
0.48/0.075
M3VA 80 A
1400/710
64.0/35.0 0.79/0.51
1.4/0.55 3.4/2.4
3.3/1
1.7/2.2
1.7/2.6
0.0013
0.63/0.1
M3VA 80 B
1400/710
68.0/40.0 0.81/0.50
1.65/0.75 3.7/2.5
4.4/1.35
1.8/2.3
1.8/2.6
0.0016
11
0.73/0.12
M3VA 80 C
1400/710
70.0/42.0 0.80/0.50
1.9/0.85 4.1/2.6
5/1.7
2.0/2.3
2.0/2.5
0.002
12
1/0.13
M3AA 90 S
1400/700
71.0/38.0 0.83/0.70
2.6/0.72 3.9/2.1
6.8/1.8
1.5/1.0
2.0/1.7
0.0032
13
1.4/0.18
M3AA 90 L
1420/710
74.0/41.0 0.81/0.60
3.5/1.1
4.5/2.3
9.4/2.4
1.7/1.1
2.3/2.1
0.0043
16
1.85/0.25
M3AA 100 LA
1430/720
78.0/45.0 0.84/0.60
4.2/1.4
4.9/2.5
12/3.3
1.7/1.1
2.3/2.1
0.0069
20
2.3/0.33
M3AA 100 LB
1430/720
80.0/49.0 0.86/0.60
5/1.6
5.2/2.6
15/4.3
1.8/1.1
2.4/2.2
0.0082
23
3/0.4
M3AA 112 M
1440/730
81.0/51.0 0.87/0.58
6.2/2
6.8/3.8
19.9/5.2
1.5/1.6
2.4/2.6
0.018
32
4/0.6
M3AA 132 S
1465/740
84.0/51.0 0.84/0.53
8.2/3.2
6.5/3.5
26.1/7.7
1.5/1.1
2.4/2.5
0.038
48
5.5/0.9
M3AA 132 M
1455/735
84.0/53.0 0.87/0.64
10.9/3.9 6.2/3.1
36.1/11.7 1.5/1.1
2.2/2.0
0.048
59
9/1.3
M3AA 160 M
1460/735
87.0/60.0 0.84/0.53
18/5.9
6.6/4.0
59/17
2.0/2.2
2.5/2.7
0.089
92
13/1.8
M3AA 160 L
1455/735
88.0/64.0 0.85/0.53
26/8.2
6.0/4.1
89/26
1.9/2.2
2.3/2.6
0.119
117
16/2.3
M3AA 180 M
1475/740
88.5/64.0 0.82/0.53
32/9.7
6.8/4.1
104/30
2.2/2.2
2.7/2.6
0.176
130
19/2.7
M3AA 180 L
1475/740
89.5/68.0 0.83/0.54
37/10.5
7.5/7.2
123/35
2.6/2.6
2.9/2.6
0.224
159
26/3.3
1475/740
91.0/73.0 0.85/0.59
49/11
6.9/4.6
168/46
2.1/2.2
2.5/2.3
0.28
180
30/3.8
1470/740
91.5/75.5 0.86/0.59
55/12.5
6.7/4.6
195/49
2.1/2.2
2.4/2.2
0.34
205
38/5.2
1480/740
91.5/80.5 0.84/0.63
72/15
7.3/5.2
245/67
2.1/2.3
2.6/2.3
0.41
230
46/7
1480/740
92.5/82.0 0.86/0.66
85/19
7.7/4.9
297/90
2.3/2.1
2.7/2.1
0.49
265
63/10
1475/740
93.5/83.0 0.89/0.65
110/27
7.5/6.0
408/129
2.4/3.0
2.7/2.7
0.89
335
2.7/2.1
400 V 50 Hz
0.18/0.037
M3VA 71 A
1380/720
58.0/17.0 0.74/0.50
0.6/0.7
3.5/1.7
1.24/0.49 1.7/1.7
1.8/1.8
0.00066 5.5
0.37/0.09
M3VA 71 B
1360/700
58.0/19.0 0.84/0.52
1.1/1.2
3.1/1.7
2.6/1.2
1.3/1.8
1.4/1.9
0.00089 6.5
0.45/0.1
M3VA 71 C
1390/685
60.0/24.0 0.78/0.51
1.4/1.2
3.5/2.6
3.1/1.4
1.7/1.3
1.8/1.4
0.0011
0.55/0.13
M3VA 80 A
1410/680
64.0/50.0 0.70/0.60
1.8/0.65 3.8/2.4
3.74/1.83 2.2/1.6
2.2/1.6
0.0013
0.75/0.17
M3VA 80 B
1400/675
67.0/53.0 0.75/0.62
2.15/0.75 4.0/2.4
5.13/2.41 2.0/1.4
2.0/1.4
0.0016
10
0.9/0.2
M3VA 80 C
1400/680
70.0/56.0 0.76/0.62
2.45/0.85 4.3/2.5
6.15/2.82 2.3/1.5
2.3/2.5
0.002
11
1.1/0.26
M3AA 90 S
1410/700
73.0/53.0 0.80/0.63
2.8/1.2
4.2/2.4
7.4/3.6
1.8/1.2
2.3/1.9
0.0032
13
1.7/0.35
M3AA 90 L
1390/700
74.0/57.0 0.82/0.57
4/1.6
4.5/2.5
10.3/4.7
2.2/1.5
2.6/2.1
0.0043
16
1.8/0.35
M3AA 90 LB
1400/710
76.0/60.0 0.83/0.56
4.2/1.5
4.3/2.7
12/4.8
1.9/1.6
2.3/2.3
0.0048
18
2.3/0.5
M3AA 100 LA
1415/715
76.0/63.0 0.84/0.60
5.2/1.9
4.6/2.7
15.5/6.7
1.8/1.2
2.4/1.9
0.0069
20
2.8/0.6
M3AA 100 LB
1430/720
81.0/68.0 0.82/0.58
6.4/2.2
5.2/3.0
18/8
2.0/1.2
2.6/2.2
0.0082
23
3/0.65
M3AA 100 LC
1430/720
81.0/67.0 0.81/0.56
6.8/2.5
5.6/3.0
20/8.7
2.2/1.3
2.8/2.3
0.009
26
3.5/0.7
M3AA 112 M
1430/720
81.0/71.0 0.89/0.58
7/2.5
6.8/4.4
23.4/9.3
1.6/1.7
2.5/2.7
0.018
32
5/1
M3AA 132 S
1450/725
830./74.0 0.87/0.59
9.9/3.3
6.4/3.6
32.9/13.2 1.5/1.0
2.3/2.0
0.038
48
6.8/1.4
M3AA 132 M
1460/730
85.0/73.0 0.84/0.55
13.7/5.1 7.6/3.6
44.5/18.3 2.0/1.4
2.8/2.7
0.048
59
10.5/2.2
M3AA 160 M
1460/735
87.5/79.0 0.84/0.54
21/7.4
69/29
2.7/2.3
0.089
94
15.5/2.7
M3AA 160 L
1460/735
88.5/79.5 0.85/0.51
30.9/5
6.9/3.9
101/35
2.2/1.7
2.6/2.6
0.119
117
17/3.4
M3AA 180 M
1470/730
88.5/78.0 0.85/0.56
33/11
5.8/4.3
111/44
1.7/1.2
2.3/1.9
0.176
137
22/4.4
M3AA 180 L
1475/735
89.5/79.0 0.83/0.53
43/15
6.7/3.9
143/57
2.0/1.7
2.6/2.3
0.224
161
29/6.5
1470/730
90.5/86.0 0.86/0.64
54/17
6.9/4.2
188/81
2.2/1.9
2.4/1.9
0.28
180
33/8
1475/730
91.5/86.5 0.86/0.64
61/21
7.8/4.2
214/105
2.6/1.9
2.6/1.8
0.34
205
42/10
1480/740
92.0/89.5 0.86/0.64
85/27
7.8/5.0
271/129
2.5/2.2
3.0/2.3
0.49
265
50/11
1465/735
92.5/89.5 0.87/0.65
91/28
7.3/4.7
324/143
2.3/2.0
2.5/2.0
0.49
265
60/15
1475/735
93.0/90.0 0.86/0.70
104/34
7.9/4.7
388/195
2.6/2.1
2.7/2.0
0.89
335
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
6.9/3.7
2.2/1.5
41
Motor type
Product code
Speed
r/min
Efficiency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
400 V 50 Hz
0.18/0.05
M3VA 71 A
1400/900
56.0/27.0 0.76/0.79
0,6/0,4
5.5
0.3/0.1
M3VA 71 B
1350/900
54.0/30.0 0.86/0.79
0,9/0,6
2,8/2.0 2.1/1.06
1.0/1.1 1.1/1.1
0.00089
6.5
0.5/0.19
M3VA 80 A
1370/930
60.0/53.0 0.84/0.77
1,4/0,7
2,9/3,1 3.5/1.96
1.4/1.5 1.4/1.5
0.0019
0.66/0.25
M3VA 80 B
1390/935
63.0/59.0 0.85/0.78
1,75/0,8
0.0022
10
0.78/0.3
M3VA 80 C
1400/940
66.0/60.0 0.84/0.73
2/1
0.0025
10
1/0.3
M3AA 90 S
1400/940
73.0/53.0 0.83/0.70
2,5/1,2
4,2/2,6 6.8/3
1.8/1.0 2.2/1.7
0.0032
13
1.5/0.45
M3AA 90 L
1400/930
72.0/52.0 0.84/0.73
3,5/1,6
4,3/2,9 10/4.5
1.7/1.0 2.1/1.8
0.0043
16
2/0.6
M3AA 100 LA
1430/960
77.0/62.0 0.85/0.72
4,5/2
5.0/3,3 13/5.9
1.8/1.0 2.4/1.9
0.0069
20
2.5/0.8
M3AA 100 LB
1430/960
79.0/68.0 0.84/0.71
5,5/2,5
5,6/3,5 16/7.9
2.0/1.1 2.5/2.0
0.0082
23
3/1
M3AA 112 M
1445/975
82.0/67.0 0.84/0.68
6,3/3,1
6.0/4.0 19.8/9.8
1.3/1.0 2.3/2.2
0.018
33
4.5/1.5
M3AA 132 S
1460/985
83.0/67.0 0.85/0.64
9,2/5,1
0.038
48
6/2
M3AA 132 M
1460/980
84.0/71.0 0.86/0.73
12/5,6
0.048
59
10.5/3.5
M3AA 160 M
1460/965
87.0/75,5 0.84/0.78
21/8,6
6,4/4,1 69/35
0.089
93
14.5/4.5
M3AA 160 L
1460/970
88,5/77.0 0.85/0.76
28/11
6,9/4,6 95/44
2.2/1.5 2.6/1.9
0.119
117
16/5
M3AA 180 M
1470/980
89.0/78.0 0.83/0.73
31/12,5
6,3/4,6 104/49
1.9/1.5 2.5/2.0
0.176
131
20/6.5
M3AA 180 L
1470/980
90.0/79.5 0.83/0.74
39.0/16
7,2/5.0 130/63
2.4/1.8 2.7/2.0
0.224
159
23/7.2
1475/985
89.5/84.0 0.88/0.87
43/15
7,7/7,8 149/70
1.6/1.9 2.8/2.9
0.44
175
30/9
1470/990
90.0/86.6 0.90/0.84
54/18,2
7,7/9,5 195/87
1.6/1.7 2.7/2.9
0.53
200
34/11
1470/985
91.0/85.0 0.91/0.89
60/21
7,7/6,7 221/107
1.5/1.3 2.7/2.3
0.67
225
42/14
1475/985
91.5/89.0 0.89/0.89
75/27
8,4/6,8 272/136
1.7/1.4 3.0/2.3
0.78
255
63/18.5
1475/985
93.5/87.0 0.89/0.79
110/40
7,5/7,3 408/179
2.4/3.0 2.7/2.6
0.89
335
2.0/1.3 2.5/1.7
400 V 50 Hz
0.25/0.1
M3VA 80 A
945/725
57.0/41.0 0.68/0.55
2.0/2.4 2.2/2.9
0.0019
0.33/0.14
M3VA 80 B
940/720
62.0/46.0 0.74/0.56
1.05/0.8
0.0022
10
0.45/0.2
M3AA 90 S
940/700
59.0/44.0 0.72/0.67
1.6/1
3.1/2.2 4.6/2.7
1.4/1.0 2.0/1.7
0.0032
13
0.7/0.3
M3AA 90 L
930/690
63.0/45.0 0.75/0.64
2.2/1.5
3.1/2.3 7.2/4.1
1.3/1.1 1.8/1.8
0.0043
16
0.9/0.4
M3AA 100 LA
950/720
68.0/55.0 0.77/0.61
2.5/1.8
3.4/2.7 9.1/5.3
1.2/1.1 1.8/1.8
0.0069
20
1.2/0.5
M3AA 100 LB
950/710
71.0/57.0 0.71/0.61
3.5/2.1
3.7/2.9 12/6.6
1.3/1.2 2.0/2.0
0.0082
23
17/7.5
985/740
88.0/81.5 0.85/0.77
33/17
7.1/6.4 165/97
2.2/2.2 2.5/2.5
0.42
185
20/9
985/740
88.5/82.5 0.84/0.74
39/21
7.6/7.0 194/116
2.4/2.6 2.7/2.9
0.48
200
26/12
985/740
89.5/84.5 0.85/0.76
49/27
7.4/7.1 252/155
2.2/2.4 2.5/2.7
0.63
225
32/14
985/740
90.5/85.5 0.83/0.76
62/31
7.0/7.2 310/180
2.4/2.5 2.4/2.5
0.74
250
43/15
990/745
91.0/86.0 0.84/0.75
81/34
7.3/7.4 415/198
2.2/2.7 2.5/2.8
1.41
320
400 V 50 Hz
0.4/0.08
M3VA 80 A
900/460
62.0/30.0 0.78/0.56
1.2/0.7
0.0019
0.5/0.105
M3VA 80 B
915/465
66.0/31.0 0.75/0.52
0.0022
10
0.5/0.08
M3AA 90 S
920/440
60.0/31.0 0.74/0.59
1.7/0.63
1.2/1.4 1.8/2.0
0.0032
13
0.6/0.12
M3VA 80 C
920/470
68.0/32.0 0.74/0.50
0.0025
11
0.75/0.12
M3AA 90 L
930/450
64.0/36.0 0.73/0.54
2.4/0.9
3.0/1.8 7.7/2.5
1.3/1.6 1.9/1.9
0.0043
16
0.9/0.16
M3AA 100 LA
940/470
69.0/45.0 0.73/0.49
2.6/0.96
3.6/2.1 9/3.2
1.3/1.2 2.0/1.8
0.0069
20
1.3/0.2
M3AA 100 LB
940/460
71.0/52.0 0.76/0.47
3.5/1.2
3.4/2.2 13/4
1.2/1.0 1.8/1.5
0.0082
23
2.9/1.7 5.2/1.7
42
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Motor type
Product code
Speed
r/min
Efficiency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
400 V 50 Hz
0.58/0.28
M3VA 80 A
2850/1400
0.7/0.36
M3VA 80 B
2860/1400
2.2/1.8 0.0009
11
0.85/0.42
M3VA 80 C
2890/1410
2.5/1.7 0.0012
12
1.1/0.55
M3AA 90 S
2900/1450
5.1/3.6 3.6/3.6
1.4/1.5
2.3/2.3 0.0019
13
1.5/0.75
M3AA 90 L
2900/1450
5.7/4.1 4.9/4.9
1.5/1.5
2.5/2.3 0.0024
16
2/1
M3AA 100 L
2900/1460
6.2/4.0 6.5/6.5
1.9/1.4
2.8/2.6 0.0041
21
2.6/1.3
M3AA 112 M
2900/1460
6.4/5.0 8.6/8.5
1.6/1.6
2.3/2.3 0.012
32
4.4/2.2
M3AA 132 SB
2925/1450
2.3/2.2 0.016
42
5.6/2.8
M3AA 132 M
2885/1440
2.1/2.2 0.022
56
12/6
M3AA 160 M
2835/1460
7.7/6.0 39/39
2.1/2.3
2.8/2.4 0.054
92
15/7.5
M3AA 160 L
2940/1460
7.9/6.0 49/49
2.2/2.4
2.9/2.4 0.057
99
18/9
M3AA 180 L
2945/1460
7.7/5.2 58/59
2.5/2.3
2.8/2.1 0.108
152
23/12
2960/1475
7.8/7.4 74/77
1.7/2.2
2.8/2.5 0.28
178
30/16
2960/1475
8.2/7.3 97/104
1.8/2.2
2.9/2.5 0.34
204
36/18
2960/1480
8.0/7.2 116/116
2.5/3.8
2.7/2.5 0.26
236
40/20
2960/1475
8.5/6.5 129/129
2.8/3.3
2.8/2.2 0.29
261
50/25
2965/1485
8.9/8.5 161/161
2.1/3.5
2.9/2.9 0.57
333
400 V 50 Hz
0.11/0.07
M3VA 56 B
2730/1370
2.6/2.8 0.00018
3.5
0.2/0.15
M3VA 63 A
2800/1400
2.2/2.1 0.00019
0.3/0.2
M3VA 63 B
2740/1370
1.7/2.1
1.8/2.2 0.00026
4.5
0.37/0.25
M3VA 71 A
2700/1390
3.3/3.1 1.3/1.72
1.9/1.5
2.0/1.6 0.00066
5.5
0.48/0.31
M3VA 71 B
2780/1400
1.5/2.1 0.00089
6.5
0.55/0.37
M3VA 71 C
2800/1400
1.9/2.0 0.0011
0.63/0.5
M3VA 80 A
2690/1400
1.9/2.1 0.0013
0.85/0.65
M3VA 80 B
2725/1405
1.9/2.2 0.0016
10
1.1/0.8
M3VA 80 C
2730/1410
2.0/2.0
2.1/2.4 0.002
11
1.3/1
M3AA 90 S
2730/1400
3.9/3.8 4.5/6.8
2.0/1.5
2.2/2.0 0.0032
13
1.9/1.5
M3AA 90 L
2820/1420
5.1/4.4 6.4/10
2.8/2.0
3.0/2.5 0.0043
16
2.5/2.1
M3AA 100 LA
2800/1430
4.8/4.4 8.5/14
2.2/1.6
2.5/2.2 0.0069
20
3.4/2.7
M3AA 100 LB
2810/1430
5.3/5.4 11.5/18
2.2/1.9
2.5/2.5 0.0082
23
4/2.6
M3AA 112 M
2865/1430
2.1/2.6 0.012
32
4.7/3.1
M3AA 132 SB
2820/1420
2.1/2.4 0.016
42
7.2/4.8
M3AA 132 M
2870/1435
2.4/2.5
2.6/2.7 0.022
56
9/6.5
M3AA 160 MA
2885/1440
1.3/1.7
1.9/1.9 0.039
73
12.5/9
M3AA 160 M
2890/1440
5.2/4.6 41/60
1.4/1.8
1.9/1.9 0.054
92
15/10.5
M3AA 160 L
2900/1445
5.8/4.9 49/69
1.6/2.1
2.1/2.1 0.057
99
18/12
M3AA 180 M
2940/1455
6.8/5.3 59/79
2.1/2.4
2.6/2.2 0.094
132
24/17
M3AA 180 L
2945/1455
7.4/5.2 78/111
2.4/2.4
2.8/2.1 0.108
152
32/24
2940/1470
6.8/5.9 104/156
1.8/2.1
2.4/2.1 0.28
180
39/29
2950/1470
6.8/7.0 126/188
1.7/2.2
2.6/2.4 0.34
205
42/32
2955/1475
7.1/6.5 136/207
1.5/1.9
2.5/2.3 0.49
230
50/40
2965/1480
7.4/7.1 161/259
2.4/2.8
3.3/3.0 0.49
265
68/50
2940/1475
6.6/6.9 220/324
1.5/2.1
2.4/2.5 0.89
335
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
43
Motor type
Product code
Speed
r/min
Efficiency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
400 V 50 Hz
0.25/0.06
M3VA 71 A
2760/660
0.86/0.86 1.0/1.3
1.1/1.4 0.00066
5.5
0.37/0.09
M3VA 71 B
2800/660
2.8/2.0
1.26/1.3
1.1/1.7 0.00089
6.5
0.5/0.12
M3VA 80 A
2730/700
3.2/2.3
1.78/1.64 1.3/2.0
1.6/2.0 0.0013
0.66/0.15
M3VA 80 B
2780/700
2.55/2.45 1.4/2.2
1.8/2.2 0.0016
10
0.78/0.18
M3VA 80 C
2800/700
4.0/2.6
2.67/2.46 1.5/2.4
2.2/2.4 0.002
11
0.75/0.18
M3AA 90 LA
2875/720
1.9/1.1
5.7/2.4
2.5/2.4
2.3/1.3 0.0043
16
1.3/0.33
M3AA 90 LB
2780/690
4.5/2.3
4.4/4.5
1.8/1.2
2.0/1.7 0.0043
16
1.8/0.5
M3AA 100 LB
2860/705
5.3/2.6
6/6,7
1.7/1.3
2.2/1.9 0.0082
24
1.0/1.6
400 V 50 Hz
0.11/0.08
M3VA 63 B
1390/860
1.9/1.9 0.00026
4.5
0.3/0.2
M3VA 71 A
1390/900
2.8/2.0
1.37/0.79 1.1/1.1
1.1/1.1 0.00066
5.5
0.37/0.22
M3VA 71 B
1380/900
2.7/1.9
2.07/1.91 1.0/1.1
1.1/1.1 0.00089
6.5
0.43/0.28
M3VA 80 A
1380/910
3.1/2.9
2.54/3.02 1.5/1.4
1.5/1.4 0.0019
0.58/0.37
M3VA 80 B
1390/920
3.3/3.2
4/3.85
1.5/1.5
1.6/1.6 0.0022
10
0.7/0.45
M3VA 80 C
1390/925
3.4/3.4
4.82/4.66 1.6/1.7
1.7/1.8 0.0025
10
0.8/0.5
M3AA 90 S
1430/940
3.9/2.8
5.3/5
2.1/2.1 0.0032
13
1.2/0.75
M3AA 90 L
1430/940
4.4/3.1
8/7.6
1.7/1.5
2.3/2.1 0.0043
16
1.5/0.9
M3AA 100 LA
1440/960
4.7/3.8
9.9/8.9
1.5/1.5
2.2/2.4 0.0069
20
1.8/1.1
M3AA 100 LB
1460/960
5.8/3.9
11/11
2.1/1.6
3.0/2.5 0.0082
23
2.6/1.7
M3AA 112 M
1445/960
5.9/5.2
17.2/16.9 1.5/1.5
2.2/2.4 0.018
33
3.3/2.2
M3AA 132 S
1470/980
6.8/4.6
21.4/21.4 1.4/1.2
2.5/2.4 0.038
48
4.5/3
M3AA 132 M
1470/980
7.2/5.6
29.2/29.2 1.4/1.5
2.3/2.6 0.048
59
7.5/5.5
M3AA 160 M
1465/965
7.1/4.7
49/54
2.1/1.8
2.7/1.9 0.089
93
11.5/8.5
M3AA 160 L
1465/965
7.0/4.9
75/84
2.1/1.8
2.8/2.0 0.119
117
13/8
M3AA 180 M
1475/975
6.5/4.3
84/78
1.9/1.4
2.6/1.8 0.176
131
15/10
M3AA 180 L
1475/975
7.1/4.4
97/98
2.3/1.5
2.7/1.9 0.224
159
18/12
1475/985
7.6/7.8
117/116
2.1/2.6
2.5/2.6 0.42
185
22/14.7
1480/985
8.2/7.6
142/143
2.4/2.6
2.8/2.5 0.48
200
25/16.7
1475/980
7.7/6.7
162/162
2.3/2.3
2.6/2.2 0.48
200
32/21
1480/985
8.6/8.0
206/204
2.3/2.4
2.8/2.7 0.63
225
36/24
1480/985
8.4/7.4
232/233
2.2/2.2
2.8/2.5 0.74
250
50/32
1475/985
7.5/7.1
324/310
2.3/3.1
2.6/2.6 0.89
335
1.5/1.4
44
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Motor type
Product code
Speed
r/min
Efficiency
%
Power
factor
cos
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Moment
of inertia
J=1/4 GD2 Weight
kgm2
kg
0.28/0.14
M3VA 80 A
4.0/3.0
1.88/1.92 1.9/1.9
2.2/2.0
0.0019
0.38/0.19
M3VA 80 B
4.2/3.1
2.55/2.58 2.0/2.0
2.4/2.0
0.0022
10
0.46/0.23
M3VA 80 C
4.3/3.3
3.1/3.1
2.0/2.1
2.4/2.2
0.0025
11
0.55/0.25
M3AA 90 S
4.2/2.3
3.6/3.4
1.3/1.4
2.2/2.1
0.0032
13
0.75/0.37
M3AA 90 L
4.1/2.5
4.9/5
1.4/1.5
2.4/2.2
0.0043
16
1.1/0.55
M3AA 100 LA
4.2/2.6
7.2/7.4
1.2/1.2
2.3/1.9
0.0069
20
1.5/0.75
M3AA 100 LB
4.6/2.7
9.8/10
1.3/1.2
2.2/1.9
0.0082
23
1.8/0.9
M3AA 112 M
6.5/4.0
11.7/12
1.2/1.6
2.2/2.4
0.018
32
2.5/1.3
M3AA 132 S
6.7/4.4
16.2/17
1.6/1.4
2.6/2.7
0.038
48
3.3/1.7
M3AA 132 M
8.0/4.8
21.4/22.4 1.8/1.8
2.7/2.2
0.048
59
5.5/2.7
M3AA 160 M
5.6/4.0
36/35
1.7/2.0
2.2/2.3
0.089
92
9/4.5
M3AA 160 L
7.0/4.1
59/59
2.1/2.1
2.7/2.5
0.119
117
14/7
M3AA 180 L
7.7/4.2
91/91
2.6/2.3
2.9/2.3
0.225
159
18.5/9.4
7.3/4.3
120/123
2.2/1.9
2.5/1.8
0.28
180
22/11
8.4/4.7
142/143
2.6/2.4
2.9/2.2
0.34
205
28/14
7.7/4.9
181/182
2.1/2.4
2.7/2.2
0.41
230
34/17
7.9/4.8
219/221
2.2/2.2
2.7/2.0
0.49
265
50/25
8.6/6.0
323/323
2.6/3.5
3.0/2.9
0.89
335
400 V 50 Hz
0.11/0.06
M3VA 63 B
3.0/1.7
0.75/0.87 1.6/2.5
1.7/2.6
0.00026 4.5
0.18/0.11
M3VA 71 A
3.2/2.5
1.24/1.54 1.9/2.2
2.0/2.3
0.00066 5.5
0.3/0.15
M3VA 71 B
3.2/2.6
2.05/2.05 2.0/2.5
2.1/2.6
0.00089 6.5
0.45/0.25
M3VA 80 A
3.5/2.7
3.12/3.42 1.7/2.1
1.7/2.1
0.0019
0.63/0.33
M3VA 80 B
3.5/2.8
4.37/4.48 1.7/2.2
1.7/2.2
0.0022
10
0.7/0.37
M3AA 90 S
4.4/2.3
4.7/5.1
1.6/1.6
2.3/2.2
0.0032
13
0.75/0.37
M3VA 80 C
3.9/2.9
5.16/4.98 1.9/2.5
1.9/2.5
0.0025
10
1.1/0.55
M3AA 90 L
4.1/2.3
7.4/7.5
1.4/1.5
2.0/2.1
0.0043
16
1.5/0.75
M3AA 100 LA
4.6/2.8
10/10
1.4/1.5
2.2/2.2
0.0069
20
2/0.95
M3AA 100 LB
4.8/2.9
13/12
1.4/1.6
2.2/2.3
0.0082
23
2.5/1.5
M3AA 112 M
5.5/4.1
16.9/20.3 1.4/1.5
2.1/2.4
0.018
32
3.8/1.9
M3AA 132 S
5.6/3.7
25/24.9
1.4/1.3
2.1/2.7
0.038
48
5/2.5
M3AA 132 M
6.9/4.8
32.8/32.7 1.7/2.0
2.4/2.8
0.048
59
8/4.5
M3AA 160 M
4.5/3.4
53/59
1.3/1.4
1.8/1.9
0.089
92
12/7
M3AA 160 L
5.0/3.5
79/92
1.5/1.4
1.9/1.9
0.119
117
16/8
M3AA 180 L
1.9/3.4
105/104
1.4/1.6
1.9/2.1
0.224
159
22/13
6.5/5.9
142/169
2.0/2.5
2.6/2.7
0.36
165
25/15
7.6/6.0
162/195
2.2/2.6
2.7/2.7
0.42
185
29/17
7.2/6.1
188/221
2.2/2.6
2.4/2.4
0.48
200
35/21
6.7/5.8
227/273
1.7/2.1
2.2/2.3
0.63
225
42/25
6.8/5.9
272/325
1.8/2.1
2.2/2.2
0.74
250
55/33
7.3/6.4
355/426
2.1/2.5
2.5/2.5
1.5
320
400 V 50 Hz
1.6/0.8
M3AA 112 M
5.6/4.4
15.8/10.6 2.3/2.3
0.015
35
2.3/1.3
M3AA 132 S
6.4/4.2
25.4/17.0 1.6/1.5
0.04
48
3.5/1.6
M3AA 132 M
7.1/5.1
34.2/20.9 2.0/1.9
0.041
48
16/12
155/155
2.1/2.4
0.42
185
18/13.5
174/174
2.5/2.6
0.48
200
23/17
222/220
2.3/2.2
0.63
225
28/20
272/259
2.0/2.3
0.74
250
37/27
357/348
2.3/2.5
1.41
320
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
7.8/6.7
45
Variant
1)
Motor size
56- 719063
80
100
Balancing
052
417
NA
NA
NA
423
424
036
NA
NA
037
NA
NA
NA
NA
039
040
041
NA
NA
042
NA
043
SPM nipples.
NA
NA
057
NA
NA
NA
NA
058
059
107
NA
NA
NA
NA
NA
NA
NA
188
63-series bearings.
NA
NA
796
NA
NA
797
NA
NA
NA
798
NA
NA
NA
NA
NA
NA
079
NA
142
Manilla connection.
NA
NA
178
199
NA
NA
NA
NA
NA
209
425
785
Reinforced tropicalisation.
NA
NA
NA
Cooling system
053
068
Metal fan.
NA
075
183
NA
NA
NA
189
NA
NA
NA
793
NA
NA
NA
794
NA
NA
NA
1)
46
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Code
Variant
1)
Motor size
56- 71- 9063 80
100
NA
NA
NA
Coupling
035
Dimension drawing
141
Drain holes
065
076
NA
NA
NA
NA
NA
NA
NA
NA
Earthing bolt
067
Hazardous environments
Heating elements
Motor size
Element capacity
56-71
8W
80-160
25 W
180-280
50 W
450
451
Insulation system
014
405
NA
NA
406
NA
NA
NA
NA
NA
Marine Motors
See catalogue Marine Motors for details.
Mounting arrangements
NOTE: Multiple flange sizes available using two-piece flange
system, see page 48.
007
IM 3001 flange mounted, IEC flange, from IM 1001 (B5 from B3).
NA
NA
NA
008
NA
NA
NA
NA
009
047
IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5).
NA
NA
NA
048
IM 3001 flange mounted, IEC flange, from IM 3601 (B5 from B14).
NA
NA
NA
NA
NA
066
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
078
080
090
091
200
217
1)
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
47
Code
Variant
Motor size
56- 719063
80
100
218
NA
NA
NA
NA
NA
NA
NA
NA
219
NA
NA
NA
NA
NA
NA
NA
NA
220
NA
NA
NA
NA
NA
NA
NA
NA
223
NA
NA
NA
NA
NA
NA
NA
NA
224
NA
NA
NA
NA
NA
NA
NA
NA
226
NA
NA
NA
NA
NA
NA
NA
NA
227
NA
NA
NA
NA
NA
NA
NA
NA
233
NA
NA
NA
NA
NA
NA
NA
NA
234
NA
NA
NA
NA
NA
NA
NA
NA
243
NA
NA
NA
NA
NA
NA
NA
NA
NA
244
NA
NA
NA
NA
NA
NA
NA
NA
NA
304
NA
NA
NA
NA
NA
NA
NA
1)
Painting
114
179
Protection
005
072
073
NA
NA
NA
NA
NA
NA
NA
NA
158
211
Weather protected, IP xx W.
NA
NA
403
784
Gamma-seal at D-end.
NA
NA
003
004
NA
NA
NA
095
098
135
NA
NA
138
139
160
161
162
NA
NA
163
NA
NA
NA
198
1)
48
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Code
Variant
1)
Motor size
56- 719063
80
100
070
131
165
NA
NA
410
011
NA
NA
NA
NA
NA
029
NA
NA
NA
NA
NA
NA
NA
408
NA
NA
NA
NA
NA
778
NA
NA
NA
779
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
435
436
437
439
440
NA
NA
441
442
445
1)
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
49
Code
Variant
1)
Motor size
56- 719063
80
100
Terminal box
015
017
019
NA
NA
NA
NA
021
NA
NA
NA
NA
NA
180
NA
NA
NA
NA
NA
112
NA
NA
NA
NA
NA
136
NA
NA
137
NA
157
NA
NA
NA
187
NA
NA
NA
230
402
NA
NA
NA
NA
NA
NA
NA
NA
375
NA
NA
NA
NA
NA
402
NA
NA
NA
NA
NA
NA
NA
413
NA
NA
NA
NA
NA
NA
NA
NA
418
NA
NA
467
NA
NA
NA
468
NA
NA
NA
469
NA
NA
NA
729
NA
NA
NA
NA
NA
NA
NA
376
NA
NA
NA
NA
NA
731
Testing
140
Test confirmation.
145
146
Type test with report for motor from specific delivery batch.
147
Type test report with motor from spec. del. batch, customer
witnessed.
148
149
NA
NA
153
221
Type test and multi-point load test with report for motor from
specific delivery batch.
Torque/speed curve, type test and multi-point load test with
report from specific delivery batch.
222
760
761
NA
NA
NA
762
763
NA
NA
764
NA
NA
1)
50
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Code Variant
Motor size
56- 71- 9063
80
100
1)
NA
NA
NA
NA
NA
NA
NA
NA
704
NA
NA
NA
NA
NA
NA
189
NA
NA
NA
NA
NA
470
Prepared for hollow shaft pulse tacho (Leine & Linde equivalent). R
570
NA
NA
473
NA
NA
572
NA
NA
573
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Separate motor cooling & prepared for tacho; tacho not included
474
574
578
Separate motor cooling (fan axial, N-end) and prepared for hollow shaft tacho (Leine&Linde equivalent).
Separate motor cooling (fan axial, N-end) and prepared for
hollow shaft tacho (L&L 503).
Separate motor cooling, IP44, 400V, 50Hz (fan axial, N-end) and
prepared for hollow shaft tacho (L&L 503).
Separate motor cooling (fan axial, N-end) and 1024 pulse tacho
(Leine & Linde 861) mounted.
Separate motor cooling (fan axial, N-end) and 2048 pulse tacho
(Leine & Linde 861) mounted.
Separate motor cooling (fan axial, N-end) and 1024 pulse tacho
(L&L 503).
Separate motor cooling (fan axial, N-end) and 2048 pulse tacho
(L&L 503).
Separate motor cooling IP44, 400V 50Hz (fan axial, N-end) and
1024 pulse tacho (L&L 503).
Separate motor cooling IP44 400V, 50Hz (fan axial, N-end) and
2048 pulse tacho (L&L 503).
Y/D starting
117
118
1)
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
51
Sizes 56-112
Dimension drawings
Flange-mounted motor, large flange;
IM B5 (IM 3001), IM 3002
M000031
M000032
Foot-mounted motor;
IM B3 (IM 1001), IM 1002
A
90
100
112
125
140
140
160
190
AA
18
25
24
28
27
27
32
41
AB
108
120
136
154
170
170
197
230
AC
110
120
130
150
177
177
197
197
AE
72
85
85
97
110
110
110
110
B
71
80
90
100
100
125
140
140
Motor
size
G
GA
GB
GC
H
HA
56
7.2
10.2 7.2
10.2 56
8
63
8.5
12.5 8.5
12.5 63
7
71
11
16
8.5
12.5 71
9
80
15.5 21.5 11
16
80
10
90 S
20
27
11
16
90
11
90 L
20
27
11
16
90
11
100
24
31
15.5 21.5 100 12
1121)
24
31
15.5 21.5 112 12
1)
Frame size 112, only generation code -E
BB
85
98
110
125
125
150
172
172
HC
110
120
130
150
177
177
198
221
C
36
40
45
50
56
56
63
70
CA
78
74
78
80
81
81
91
106
HD
159
151
176
190
217
217
237
249
HE
71
50
63
67
82.5
82.5
92.5
92.5
CB
7
10
10
12.5
12.5
12.5
16
16
K
5.8
7
7
10
10
10
12
12
D
9
11
14
19
24
24
28
28
KA
9
11
10
15
14
14
15
15
DA
9
11
11
14
14
14
19
19
L
197
214
238
265
282
307
349
371
DB
M3
M4
M5
M6
M8
M8
M10
M10
LC
225
237
266
300
317
342
394
416
DC
M3
M4
M4
M5
M5
M5
M6
M6
E
20
23
30
40
50
50
60
60
UB
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
M20x1.5
EA
20
23
23
30
30
30
40
40
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
EG
9
10
13
16
19
19
22
22
EH
9
10
10
13
12.5
12.5
19
10
F
3
4
5
6
8
8
8
8
FA
3
4
4
5
5
5
6
6
VA
30
31
35
37
43.5
43.5
47
47
VB
72
92
92
100
110
110
110
110
VC
26
30.5
22
26
33
33
33
33
VD
53
61.5
57
61
67
67
67
67
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
12
10
11
100
115
130
165
165
215
80
95
110
130
130
180
120
140
160
200
200
250
7
10
10
12
12
15
3
3
3.5
3.5
3.5
4
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
10
13
14
65
75
85
100
115
130
50
60
70
80
95
110
80
90
105
120
140
160
M5
M5
M6
M6
M8
M8
2.5
2.5
2.5
3
3
3.5
Tolerances:
A,B
+ - 0.8
D, DA
ISO j6
F, FA
ISO h9
52
+0 -0.5
ISO j6
+- 0.8
Sizes 56-112
Dimension drawings
Foot- and flange-mounted motor;
IM B34 (IM 2101), IM 2102, small flange
M000035
M000034
2
IM B35 (IM 2001),IM 2002, IM B34 (IM 2101), IM 2102
1)
Motor
size
56
63
71
80
90 S
90 L
100
1121)
A
90
100
112
125
140
140
160
190
Motor
size
56
63
71
80
90 S
90 L
100
1121)
G
GA
7.2
10.2
8.5
12.5
11
16
15.5 21.5
20
27
20
27
24
31
24
31
AA
18
25
24
28
27
27
32
41
AB
108
120
136
154
170
170
197
230
AC
110
120
130
150
177
177
197
197
AE
72
85
85
97
110
110
110
110
B
71
80
90
100
100
125
140
140
GB
7.2
8.5
8.5
11
11
11
15.5
15.5
GC
10.2
12.5
12.5
16
16
16
21.5
21.5
H
56
63
71
80
90
90
100
112
HA
8
7
9
10
10
10
12
12
BB
85
98
110
125
125
150
172
172
HC
110
120
130
150
177
177
197
221
C
36
40
45
50
56
56
63
70
CA
78
74
78
80
81
81
91
106
HD
159
151
176
190
217
217
237
249
HE
71
50
63
67
82.5
82.5
92.5
92.5
CB
7
10
10
12.5
12.5
12.5
16
16
K
5.8
7
7
10
10
10
12
12
D
9
11
14
19
24
24
28
28
KA
9
11
10
15
14
14
15
15
DA
9
11
11
14
14
14
19
19
L
197
214
238
265
282
307
349
371
DB
M3
M4
M5
M6
M8
M8
M10
M10
LC
225
240
266
300
317
342
394
416
DC
M3
M4
M4
M5
M5
M5
M6
M6
E
20
23
30
40
50
50
60
60
UB
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
M20x1.5
EA
20
23
23
30
30
30
40
40
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
M25x1.5
EG
9
10
13
16
19
19
22
22
EH
9
10
10
13
12.5
12.5
19
19
VA
30
31
35
37
43.5
43.5
47
47
VB
72
92
92
100
110
110
110
110
F
3
4
5
6
8
8
8
8
FA
3
4
4
5
5
5
6
6
VC
26
30.5
22
26
33
33
33
33
VD
53
61.5
57
61
67
67
67
67
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
12
10
11
100
115
130
165
165
215
80
95
110
130
130
180
120
140
160
200
200
250
7
10
10
12
12
15
3
3
3.5
3.5
3.5
4
56
63
71
80
90
100
103
108
105
110
127
137
10
10
10
10
13
14
65
75
85
100
115
130
50
60
70
80
95
110
80
90
105
120
140
160
M5
M5
M6
M6
M8
M8
2.5
2.5
2.5
3
3
3.5
Tolerances:
A,B
+ - 0.8
D, DA
ISO j6
F, FA
ISO h9
+0 -0.5
ISO j6
+- 0.8
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
53
Sizes 71-112
M000036
Dimension drawings
Special design with two-piece flanges
Motor
size
71
80
90
100
112 3)
IEC
Flange
FT85
FF100 / FT100
FF115 / FT115
FF130 / FT130
FF165 / FT165
FT85
FF100 / FT100
FF115 / FT115
FF130 / FT130
FF165 / FT165
FT85
FF100 / FT100
FF115 / FT115
FF130 / FT130
FF165 / FT165
FF130 / FT130
FF165 / FT165
FF215 / FT215
FF130 / FT130
FF165 / FT165
FF215 / FT215
Flange dimensions
HB
P
M
105
105
85
105
120
100
105
140
115
105
160
130
105
200
165
110
105
85
110
120
100
110
140
115
110
160
130
110
200
165
127
105
85
127
120
100
127
140
115
127
160
130
127
200
165
137
160
130
137
200
165
137
250
215
137
160
130
137
200
165
137
250
215
N
70
80
95
110
130
70
80
95
110
130
70
80
95
110
130
110
130
180
110
130
180
LA
7.5
7.5
9.5
9.5
10.5
7.5
7.5
9.5
9.5
10.5
7.5
7.5
9.5
9.5
10.5
9.5
10.5
12.5
9.5
10.5
12.5
2)
S
M6
M6
M8
M8
M10
M6
M6
M8
M8
M10
M6
M6
M8
M8
M10
M8
M10
M12
M8
M10
M12
T
2.5
3
3
3.5
3.5
2.5
3
3
3.5
3.5
2.5
3
3
3.5
3.5
3.5
3.5
4
3.5
3.5
4
Variant code 1)
FF
FT
218
220
219
223
224
226
227
233
234
218
220
219
223
224
226
227
233
234
218
220
219
223
224
226
227
233
234
226
227
233
234
243
244
226
227
233
234
243
244
Variant code 200 Flange ring holder must be added when using the variant codes mentioned below.
Flanges with clearance (FF) or tapped (FT) holes for indicated screws.
3)
Frame size 112, only generation code E
2)
Tolerances:
54
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Sizes 112-132
Dimension drawings
Foot-mounted motor; IM B 3 (IM 1001), IM 1002
M000038
M000037
2
M000039
IM B 3 (IM 1001)
Motor
size
AA
AB
AC
AE
BA BB
BC C
CA
CA
CB
DA
DB
DC
EB)
EA
EG
EH
F FA
1121)
190
41
222
221
160
140
31
168
31
70
115.5
14
28
19
M10
M8
60
40
22
19
1122)
190
41
222
221
160
140
31
168
31
70
138
14
28
19
M10
M8
60
40
22
19
1323)
216
47
262
261
160
140
178A)
40
212
76
89
158
120
18
38
24
M12
M8
80
50
28
19
10
1324)
216
47
262
261
160
140A)
178
40
212
76
89
191
153
18
38
24
M12
M8
80
50
28
19
10
Motor G GA GB
size
1121)
112
2)
GC H
HA HC
HD
HE
258
92
12 361F)
92
F)
258
12 388
L1
UB1C) UB2C) VA VB
LC1 LC2
VCD)
L2
LC
VD1 VD2
361F)
361F)
421.5
421.5 421.5
M20
M25
60 160
80
120
40
388
F)
388F)
448
448
448
M20
M25
60 160
80
120
40
447G)
447G)
1323)
33 41 20
27
517
517
517
M20
M25
71 160
80
120
40
1324)
33 41 20
27
550
550
M20
M25
71 160
80
120
40
IM B 5 (IM 3001)
Motor
size
HB
LA
HB
LA
112
146
20
130
110
160
M8
3.5
1122)
146
20
130
110
160
M8
3.5
14.5
1323)
163.5 18
165
130
200
M10
3.5
14.5
1324)
163.5 18
165
130
200
M10
3.5
112
1)
146
11
215
180
250
14.5
1122)
146
11
215
180
250
14.5
1323)
163.5 14
265
230
300
1324)
163.5 14
265
230
300
Tolerances
A, B
ISO js14
C, CA +2 -2
D28
ISO j6
D38
ISO k6
DA
ISO j6
F, FA
ISO h9
H
+0 -0.5
N
ISO j6
1)
2)
3)
4)
Motor
size
1)
A)
B)
C)
D)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
E)
F)
G)
55
Sizes 112-132
Dimension drawings
M000040
2
M000041
AA
AB
AC
AE
BA BB
BC C
CA
CA
CB
DA
DB
DC
EB)
EA
EG
EH
F FA
1121)
190
41
222
221
160
140
31
168
31
70
115.5
14
28
19
M10
M8
60
40
22
19
1122)
190
41
222
221
160
140
31
168
31
70
138
14
28
19
M10
M8
60
40
22
19
1323)
216
47
262
261
160
140
178A)
40
212
76
89
158
120
18
38
24
M12
M8
80
50
28
19
10
1324)
216
47
262
261
160
140A)
178
40
212
76
89
191
153
18
38
24
M12
M8
80
50
28
19
10
Motor G GA GB
size
1121)
2)
GC H
HA HC
HD
HE
258
92
12 361F)
92
F)
258
L2
LC
LC1 LC2
UB1C) UB2C) VA VB
361F)
361F)
421.5
421.5 421.5
M20
M25
60 160
80
120
40
F)
388F)
448
448
448
M20
M25
60 160
80
120
40
447G)
447G)
L1
12 388
VD1 VD2
112
1323)
33 41 20
27
517
517
517
M20
M25
71 160
80
120
40
1324)
33 41 20
27
550
550
M20
M25
71 160
80
120
40
IM B 35 (IM 2001)
Motor
size
1)
112
1122)
1323)
1324)
Tolerances
A, B
ISO js14
C, CA +2 -2
D28
ISO j6
D38
ISO k6
DA
ISO j6
F, FA
ISO h9
H
+0 -0.5
N
ISO j6
56
IM B 34 (IM 2101)
HB
LA
146
146
163.5
163.5
11
11
14
14
215
215
265
265
180
180
230
230
250
250
300
300
14.5
14.5
14.5
14.5
4
4
4
4
1)
2)
4)
388
VCD)
A)
B)
C)
D)
Motor
size
1)
112
1122)
1323)
1324)
HB
LA
146
146
163.5
163.5
20
20
18
18
130
130
165
165
110
110
130
130
160
160
200
200
M8
M8
M10
M10
3.5
3.5
3.5
3.5
E)
F)
G)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M2AA 160-200
Dimension drawings
M000042
160 3)
254 56
287.5
86
42
32
M16
M12 110
180 4)
316
88
48
32
M16
M12 110
180 5)
316
88
48
32
M16
M12 110
200 6)
318 64
365
98
133 218
180
30
55
32
M20
200 7)
318 64
365
98
133 238
200
30
55
32
M20
160 3)
10
180 4)
10
180 5)
AC
AE
B8)
Motor FA
size
AB
B8)
Motor
size
DB
DC
EA
EG
EH
80
36
28
12
80
36
28
14
80
36
28
14
M12 110
80
42
28
16
M12 110
80
42
28
16
15
602.5
693.5
2*M40
M16
89
210 84.5
134.5 167.5
15
602.5
693.5
2*M40
M16
89
210 84.5
134.5 167.5
180 20
15
643.5
734.5
2*M40
M16
89
210 84.5
134.5 167.5
35
200 25
18
711.5
801.5
2*M40
M16
109
210 84.5
134.5 167.5
35
200 25
18
732
821.5
2*M40
M16
109
210 84.5
134.5 167.5
27
35
160 20
35
180 20
10
42.5
51.5 27
35
200 6)
10
49
59
27
200 7)
10
49
59
27
8)
DA
45
51.5 27
7)
VB
42.5
6)
CB
UB22) VA
37
5)
CA
UB12)
4)
CA
LC
GC
3)
BC C
GB
2)
BB
GA
Tolerances
A, B
ISO js14
C, CA
0 +2
DA 32
ISO k6
D 45-48 ISO k6
D 55
ISO m6
F, FA
ISO h9
H
+0 -0.5
BA
HA
HC
HD
HE
VC
VD
VE
Knockout openings.
MA-2, M-2, L-2, M-4, L-4
M-2, M-4
L-4
LA-4
L-2, L-4
160 M, 180 M: B not acc. to IEC
160 L, 180 L, 200 LA: B not acc. to IEC
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
57
M2AA 160-200
Dimension drawings
M000043
AC
AE
DA
DB
DC
E8)
EA
EG
EH
FA
GA
GB
GC
HB
HE
160 3)
310
210
42
32
M16
M12
110
80
36
28
12
10
37
45
27
35
210
130
180 4)
310
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
210
130
180 5)
310
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
210
130
200 6)
360
210
55
32
M20
M12
110
80
42
28
16
10
49
59
27
35
210
145
200 7)
360
210
55
32
M20
M12
110
80
42
28
16
10
49
59
27
35
210
145
Motor
size
LA
LB
LC
160 3)
602.5
16
180 4)
602.5
16
180 5)
643.5
200 6)
200 7)
UB12)
UB22) VA
VB
VC
VD
VE
492.5 693.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
492.5 693.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
16
533.5 734.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
711.5
20
601.5 801.5
350
300
400
19
2*M40
M16
109
210
79.5
134.5
171.5
732
20
622
350
300
400
19
2*M40
M16
109
210
79.5
134.5
171.5
Tolerances
DA 32
ISO k6
D 45-48 ISO k6
D 55
ISO m6
F, FA
ISO h9
N
ISO j6
2)
3)
4)
5)
6)
7)
8)
821.5
Knockout openings.
MA-2, M-2, L-2, M-4, L-4
M-2, M-4
L-4
LA-2
L-2, L-4
Shoulder of shaft extension and contact surface of flange are in the same plane.
58
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M2AA 160-200
Dimension drawings
M000044
AA
AB
AC
B9)
AE
B9)
BA
BB
BC
CA
CA
CB
DA
DB
DC
160 3)
254
56
310
310
210
210
254
55
287.5 86
108
185.5 141.5
20
42
32
M16
M12
180 4)
279
65.5
340
310
210
241
279
58
316
88
121
185.5 141.5
25
48
32
M16
M12
180 5)
279
65.5
340
310
210
241
279
58
316
88
121
226.5 182.5
25
48
32
M16
M12
200 6)
318
64
380
360
210
267
305
98
365
98
133
218
180
30
55
32
M20
M12
200 7)
318
64
380
360
210
267
305
98
365
98
133
238
200
30
55
32
M20
M12
Motor
size
E8)
EA
EG
EH
FA
GA
GB
GC
HA
HB
HC
HD
HE
160 3)
110
80
36
28
12
10
37
45
27
35
160
20
325
370
130
15
602.5
180 4)
110
80
36
28
14
10
42.5
51.5
27
35
180
20
345
390
130
15
602.5
180 5)
110
80
36
28
14
10
42.5
51.5
27
35
180
20
345
390
130
15
643.5
200 6)
110
80
42
28
16
10
49
59
27
35
200
25
380
425
145
18
711.5
200 7)
110
80
42
28
16
10
49
59
27
35
200
25
380
425
145
18
732
Motor
size
LA
LB
LC
UB12)
UB22)
VA
VB
VC
VD
VE
160 3)
16
492.5
693.5
300
250
350 19
2*M40
M16
89
210
79.5
134.5
171.5
180 4)
20
492.5
693.5
300
250
350 19
2*M40
M16
89
210
79.5
134.5
171.5
180 5)
20
533.5
734
300
250
350 19
2*M40
M16
89
210
79.5
134.5
171.5
200 6)
20
601.5
801.5
350
300
400 19
2*M40
M16
109
210
79.5
134.5
171.5
200 7)
20
622.0
821.5
350
300
400 19
2*M40
M16
109
210
79.5
134.5
171.5
Tolerances
A, B
ISO js14
C, CA
+0 -2
DA32
ISO k6
D45-48 ISO k6
D55
ISO m6
F, FA
ISO h9
H
+0 - 0.5
N
ISO j6
2)
3)
4)
5)
6)
7)
8)
9)
Knockout openings.
MA-2, M-2, L-2, M-4, L-4
M-2, M-4
L-4
LA-2
L-2, L-4
Shoulder of shaft extension and contact surface of flange are in the same plane.
160 M, 180 M: B not acc. to IEC.
160 L, 180 L, 200 LA: B not acc. to IEC.
Above table gives the main dimensions in mm.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
59
M2AA 225-250
Dimension drawings
M000045
AA
AB
AC
AE
B5)
225 M-2
356
64
416
386
243
2867) 311
225 S-4
356
64
416
386
243
286
225 M-4
356
64
416
386
243
2867) 311
250 M-2
406
76
472
425
243
250 M-4
406
76
472
425
243
Motor
size
FA
GA
GB
GC
225 M-2
16
14
49
59
39.5
48.5
225 25
225 S-4
18
14
53
64
39.5
48.5
225 25
225 M-4
18
14
53
64
39.5
48.5
250 M-2
18
16
53
64
49
250 M-4
18
16
58
69
49
Motor
size
VE3)
VE4)
225 M-2
143
126.5
225 S-4
143
126.5
225 M-4
143
126.5
250 M-2
143
126.5
250 M-4
143
126.5
BA
BB
CA
CA
CB
DA
DB
81.5 365
149
238
213
27
55
45
149
238
213
27
60
45
81.5 365
149
278
253
27
60
3117) 349
99.5 409
168
256
218
30
3117) 349
99.5 409
168
256
218
30
HA HD
110
42
36
60
55
110
42
42
65
55
110
42
42
18
843 963
2xFL 13
241
22
866 985
241
22
866 985
250 40
571
59
250 40
571
8)
75.5
59
7)
36
45
75.5
525.5 221
6)
36
42
2xFL 13
225 25
5)
42
110
2xFL 13
18
4)
110
803 923
18
525.5 221
3)
773 893
525.5 221
2)
EH
VB
ISO js14
0 +2
ISO k6
ISO m6
ISO h9
+0 - 0.5
EG
VA
Tolerances
A, B
C, CA
DA 45
D, DA 55-65
F, FA
H
EA
UB2)
HE
LC
DC
VC3)
VC4)
VD3)
VD4)
243 109.5
81.5
176.5 171.5
243 109.5
81.5
176.5 171.5
75.5
243 109.5
81.5
176.5 171.5
2xFL 13
93.5
243 109.5
81.5
176.5 171.5
2xFL 13
93.5
243 109.5
81.5
176.5 171.5
Flange opening is provided with pipe flange FL 13, with tapped lead-in
holes plugged with sealing plugs.
Single- and two-speed motors: 2 x M40 + M16.
Motors for 230 V 50 Hz have pipe flange FL 21 and 2 x M63 + M16.
For flange opening FL 13: 2 x M40 + M16.
For extra large terminal box with flange opening FL 21: 2 x M63 + M16.
Basic design only.
Dimension CB = 30 for high output design.
Not according to IEC for M.
Not according to IEC for S.
60
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M2AA 225-250
Dimension drawings
M000047
M000046
AC
AE
DA
DB
DC
E2)
EA
EG
EH
FA
GA
GB
GC
HB
HE
225 M-2
386
243
55
45
M20
M16
110
110
42
36
16
14
49
59
39.5
48.5
300.5
221
225 S-4
386
243
60
45
M20
M16
140
110
42
36
18
14
53
64
39.5
48.5
300.5
221
225 M-4
386
243
60
45
M20
M16
140
110
42
36
18
14
53
64
39.5
48.5
300.5
221
250 M-2
425
243
60
55
M20
M20
140
110
42
42
18
16
53
64
49
59
321
241
250 M-4
425
243
65
55
M20
M20
140
110
42
42
18
16
58
69
49
59
321
241
Motor
size
LA
LB
LC
UB3)
VA
VB
VC4)
VC5)
VD4)
VD5)
VE4) VE5)
225 M-2
773
22
663
893
400
350
450
19
2 x FL 13
75.5
243
109.5
81.5
176.5
171.5
143 126.5
225 S-4
803
22
663
923
400
350
450
19
2 x FL 13
75.5
243
109.5
81.5
176.5
171.5
143 126.5
225 M-4
843
22
703
963
400
350
450
19
2 x FL 13
75.5
243
109.5
81.5
176.5
171.5
143 126.5
250 M-2
866
22
725
985
500
450
550
19
2 x FL 13
93.5
243
109.5
81.5
176.5
171.5
143 126.5
250 M-4
866
22
725
985
500
450
550
19
2 x FL 13
93.5
243
109.5
81.5
176.5
171.5
143 126.5
Tolerances
DA 45
D, DA 55-60
F, FA
N
2)
ISO k6
ISO m6
ISO h9
ISO js6
3)
4)
5)
Shoulder of shaft extension and contact surface of flange are in the same plane.
Flange opening is provided with pipe flange FL 13, with tapped lead-in holes plugged with sealing plugs.
Single- and two-speed motors: 2 x M40 + M16.
Motors for 230 V 50 Hz have pipe flange FL 21 and
2 x M63 + M16.
For flange opening FL 13: 2 x M40 + M16.
For extra large terminal box with flange opening
FL 21: 2 x M63 + M16.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
61
M2AA 225-250
Dimension drawings
M000050
M000049
225 M-2
356 64 416
213 27
36 16 14 49 59
225 S-4
356 64 416
213 27
36 18 14 53 64
225 M-4
356 64 416
253 27
36 18 14 53 64
250 M-2
406 76 472
218 30
42 18 16 53 64
250 M-4
406 76 472
218 30
42 18 16 58 69
GC
AE
N1)
UB2)
VC3)
VC4) VD3)
GA
VD4)
250 M-2
49
59
250 40 571
2 x FL 13 93.5
250 M-4
49
59
250 40 571
2 x FL 13 93.5
143
126.5
225 M-4
143
126.5
250 M-2
143
126.5
250 M-4
143
126.5
5)
VB
FA G
2 x FL 13 75.5
225 S-4
VA
EG EH F
39.5 48.5 225 25 525.5 221 18 843 22 703 963 400 350 450 19 5
4)
EA
225 M-4
126.5
DC
3)
DA DB
2 x FL 13 75.5
2)
CB D
2 x FL 13 75.5
ISO js14
0 +2
ISO k6
ISO m6
ISO h9
+0 -0.5
LC
CA
39.5 48.5 225 25 525.5 221 18 803 22 663 923 400 350 450 19 5
143
LA LB
CA
39.5 48.5 225 25 525.5 221 18 773 22 663 893 400 350 450 19 5
225 M-2
BB C
225 S-4
Tolerances
A, B
C, CA
D 44
D, DA 55-65
F, FA
H
BA
225 M-2
VE4)
HE
GB
VE3)
HA HD
Motor
size
Motor
size
AC
E5)
Motor
size
Flange opening is provided with pipe flange FL 13, with tapped lead-in holes
plugged with sealing plugs, 2 x M40 + M16.
For flange opening FL 13: 2 x M40 + M16.
For extra large terminal box with flange opening FL 21: 2 x M63 + M16.
Shoulder of shaft extension and contact surface of flange are in the same plane.
62
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M3AA 160-180
Dimension drawings
M000042
AA
160 3)
254 56
160 4)
254 56
180 5)
180 6)
AB
AC
AE
B7)
B7)
BB
BC C
287.5
86
287.5
86
316
316
DC
EA
EG
EH
42
32
M16
M12 110 80
36
28
12
42
32
M16
M12 110 80
36
28
12
88
121 218
180
25
48
32
M16
M12 110 80
36
28
14
88
121 238
200
25
48
32
M16
M12 110 80
36
28
14
15
602.5
693.5
2*M40
M16
89
210 84.5
134.5 167.5
15
643.5
734.5
2*M40
M16
89
210 84.5
134.5 167.5
180 20
15
680
770
2*M40
M16
77.5
210 84.5
134.5 167.5
180 20
15
700.5
790
2*M40
M16
77.5
210 84.5
134.5 167.5
160 3)
10
37
45
27
35
160 20
160 4)
10
37
45
27
35
160 20
180 5)
10
42.5
51.5 27
35
180 6)
10
42.5
51.5 27
35
7)
DB
VB
6)
DA
UB22) VA
GC
5)
UB12)
GB
4)
CB
LC
GA
3)
CA
2)
CA
Motor FA
size
Tolerances
A, B
ISO js14
C, CA +2 -2
D, DA ISO k6
F, FA ISO h9
H
+0 -0.5
BA
HA
HC
HD
HE
VC
VD
VE
Knockout openings.
M-2, MA-2, M-4, M-6, M-8, MA-8, L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4, M-4/6, M-4/8, LB-2, LB-4
L-8, L-4/6, L-4/8, LB-6, LB-8
M-2, M-4, L-6, L-8, M-2/4, M-4/6, M-4/8, LB-2
L-4, L-2/4, L-4/6, L-4/8, LB-4, LB-6, LB-8
160 M, 180 M: B not acc. to IEC
160 L, 180 L: B not acc. to IEC
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
63
M3AA 160-180
Dimension drawings
M000043
AC
AE
DA
DB
DC
E7)
EA
EG
EH
FA
GA
GB
GC
HB
HE
160 3)
310
210
42
32
M16
M12
110
80
36
28
12
10
37
45
27
35
210
130
160 4)
310
210
42
32
M16
M12
110
80
36
28
12
10
37
45
27
35
210
130
180 5)
360
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
225
145
180 6)
360
210
48
32
M16
M12
110
80
36
28
14
10
42.5
51.5
27
35
225
145
Motor
size
LA
LB
LC
UB12)
UB22) VA
VB
VC
VD
VE
160 3)
602.5
16
492.5 693.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
160 4)
643.5
16
533.5 734.5
300
250
350
19
2*M40
M16
89
210
79.5
134.5
171.5
180 5)
680
21
570
770
300
250
350
19
2*M40
M16
77.5
210
79.5
134.5
171.5
180 6)
700.5
21
590.5 790
300
250
350
19
2*M40
M16
77.5
210
79.5
134.5
171.5
Tolerances
D, DA ISO k6
F, FA ISO h9
N
ISO j6
2)
3)
4)
5)
6)
7)
Knockout openings.
M-2, MA-2, M-4, M-6, M-8, MA-8, L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4, M-4/6, M-4/8, LB-2, LB-4
L-8, L-4/6, L-4/8, LB-6, LB-8
M-2, M-4, L-6, L-8, M-2/4, M-4/6, M-4/8, LB-2
L-4, L-2/4, L-4/6, L-4/8, LB-4, LB-6, LB-8
Shoulder of shaft extension and contact surface of flange are in the same plane.
64
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M3AA 160-180
Dimension drawings
M000044
AA
AB
AC
AE
B8)
B8)
BA
BB
BC
CA
CA
CB
DA
DB
DC
M12
160 3)
254
56
310
310
210
210
254
55
287.5 86
108
185.5 141.5
20
42
32
M16
160 4)
254
56
310
310
210
210
254
55
287.5 86
108
226.5 182.5
20
42
32
M16
M12
180 5)
279
65.5
340
360
210
241
279
58
316
88
121
218
180
25
48
32
M16
M12
180 6)
279
65.5
340
360
210
241
279
58
316
88
121
238
200
25
48
32
M16
M12
Motor
size
E7)
EA
EG
EH
FA
GA
GB
GC
HA
HB
HC
HD
HE
160 3)
110
80
36
28
12
10
37
45
27
35
160
20
210
325
370
130
15
602.5
160 4)
110
80
36
28
12
10
37
45
27
35
160
20
210
325
370
130
15
643.5
180 5)
110
80
36
28
14
10
42.5
51.5
27
35
180
20
225
360
405
145
15
680
180 6)
110
80
36
28
14
10
42.5
51.5
27
35
180
20
225
360
405
145
15
700.5
Motor
size
LA
LB
LC
UB12)
UB22)
VA
VB
VC
VD
VE
160 3)
16
492.5
693.5
300
250
350 19
2*M40
M16
89
210
79.5
134.5
171.5
160 4)
16
533.5
734.5
300
250
350 19
2*M40
M16
89
210
79.5
134.5
171.5
180 5)
21
570
770
300
250
350 19
2*M40
M16
77.5
210
79.5
134.5
171.5
180 6)
21
590.5
790
300
250
350 19
2*M40
M16
77.5
210
79.5
134.5
171.5
Tolerances
A, B
ISO js14
C, CA +0 -2
D, DA ISO k6
F, FA ISO h9
H
+0 - 0.5
N
ISO j6
2)
3)
4)
5)
6)
7)
8)
Knockout openings.
M-2, MA-2, M-4, M-6, M-8, MA-8, L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4, M-4/6, M-4/8, LB-2, LB-4.
L-8, L-4/6, L-4/8, LB-6, LB-8.
M-2, M-4, L-6, L-8, M-2/4, M-4/6, M-4/8, LB-2.
L-4, L-2/4, L-4/6, L-4/8, LB-4, LB-6, LB-8.
Shoulder of shaft extension and contact surface of flange are in the same plan.
160 M, 180 M: B not acc. to IEC.
160 L, 180 L: B not acc. to IEC.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
65
M3AA 200-225
Dimension drawings
M000045
2
Dimension AD and HD refer to side mounted
terminal box, see page 72.
AA AB
AC
AE
BA
BB
CA
CA
CB
DA DB
DC
ED)
EA
EG EH
FA
2001)
2002)
2253)
2254)
2255)
2256)
318
318
356
356
356
356
64
64
69
69
69
69
386
386
425
425
425
425
243
243
243
243
243
243
267
267
286
286
286
286
305
305
311
311
311
311
98
98
84
84
84
84
365
365
360
360
360
360
133
133
149
149
149
149
273
313
300
325
300
325
235
275
275
300
275
300
30
30
24.5
24.5
24.5
24.5
55
55
55
55
60
60
45
45
55
55
55
55
M16
M16
M20
M20
M20
M20
110
110
110
110
140
140
110
110
110
110
110
110
42
42
42
42
42
42
16
16
16
16
18
18
14
14
14
16
16
16
Motor
size
GA GB
GC
HA HDB)
HDC) HE
LC
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB)
VEC)
2001)
2002)
2253)
2254)
2255)
2256)
49
49
49
49
53
53
59
59
59
59
64
64
48.5
48.5
59
59
59
59
200
200
225
225
225
225
25
25
25
25
25
25
533
533
578
578
578
578
18
18
18
18
18
18
774
814
836
861
866
891
893
933
955
980
985
1100
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
75.5
75.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
109.5
109.5
109.5
109.5
109.5
109.5
81.5
81.5
81.5
81.5
81.5
81.5
176.5
176.5
176.5
176.5
176.5
176.5
171.5
171.5
171.5
171.5
171.5
171.5
143
143
143
143
143
143
126.5
126.5
126.5
126.5
126.5
126.5
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
380
380
418
418
418
418
39.5
39.5
49
49
49
49
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
500.5
500.5
546
546
546
546
224
224
244.5
244.5
244.5
244.5
A)
B)
C)
D)
M20
M20
M20
M20
M20
M20
36
36
42
42
42
42
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M3AA 200-225
Dimension drawings
M000047
M000048
M000046
M3AA 225
M3AA 200
AC
AE
DA
DB
DC
ED)
EA
EG
EH
FA
GA
GB
GC
HBB)
HBC)
HE
2001)
2002)
2253)
2254)
2255)
2256)
386
386
425
425
425
425
243
243
243
243
243
243
55
55
55
55
60
60
45
45
55
55
55
55
M20
M20
M20
M20
M20
M20
M16
M16
M20
M20
M20
M20
110
110
110
110
140
140
110
110
110
110
110
110
42
42
42
42
42
42
36
36
42
42
42
42
14
14
16
16
16
16
16
16
16
16
16
16
49
49
49
49
53
53
59
59
59
59
64
64
39.5
39.5
49
49
49
49
48.5
48.5
59
59
59
59
301
301
321
321
321
321
333
333
353
353
353
353
224
224
244.5
244.5
244.5
244.5
LA
LB
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB)
774
814
836
861
866
891
20
20
22
22
22
22
664
704
726
751
726
751
350
350
400
400
400
400
300
300
350
350
350
350
400
400
450
450
450
450
19
19
19
19
19
19
5
5
5
5
5
5
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
2xFL13
75.5
75.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
109.5
109.5
109.5
109.5
109.5
109.5
81.5
81.5
81.5
81.5
81.5
81.5
176.5
176.5
176.5
176.5
176.5
176.5
171.5
171.5
171.5
171.5
171.5
171.5
143
143
143
143
143
143
Motor
size
1)
200
2002)
2253)
2254)
2255)
2256)
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
LC
893
933
955
980
985
1100
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
A)
B)
C)
D)
VEC)
126.5
126.5
126.5
126.5
126.5
126.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
67
M3AA 200-225
Dimension drawings
M000051
M000050
M000049
M3AA 225
M3AA 200
AA
AB
200
1)
318
64
2002)
318
64
2253)
356
2254)
AC
DC
ED)
EA
EG EH F
FA G
GA GB
GC
AE
BA
BB
CA
CA
CB
DA DB
380 386
243
267
305 98
365
133
273 235
30
55
49 59
39.5 48.5
380 386
243
267
305 98
365
133
313 275
30
55
49 59
39.5 48.5
69
418 425
243
286
311 84
360
149
300 275
25
55
49 59
49
59
356
69
418 425
243
286
311 84
360
149
325 300
25
55
49 59
49
59
2255)
356
69
418 425
243
286
311 84
360
149
300 275
25
60
53 64
49
59
2256)
356
69
418 425
243
286
311 84
360
149
325 300
25
60
53 64
49
59
Motor
size
LA LB
LC M
UBA)
VA
VB
VDC)
VEB) VEC)
1)
200
200 25
20 664
2xFL13
75.5
2002)
200 25
20 704
2xFL13
75.5
2253)
225 25
22 726
2xFL13
93.5
2254)
225 25
22 751
2xFL13
93.5
2255)
225 25
22 726
2xFL13
93.5
2256)
225 25
22 751
2xFL13
93.5
Tolerances
A,B
ISO js14
C, CA
+0 -2
D 55-65 ISO m6
DA 45-55 ISO k6
F, FA
ISO h9
H
+0 -0.5
N
ISO j6
1)
A)
2)
4)
B)
C)
D)
143 126.5
68
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M3AA 250-280
Dimension drawings
M000045
2
Dimension AD and HD refer to side mounted
terminal box, see page 72.
250
2502)
2503)
2504)
2805)
2806)
2807)
2808)
AA
AB
AC
AE
BA
BB
CA
CA
CB
DA DB
DC
ED)
EA
EG EH
406
406
406
406
457
457
457
457
78
78
78
78
102.5
102.5
102.5
102.5
474
474
474
474
525
525
525
525
471
471
471
471
471
471
471
471
243
243
243
243
243
243
243
243
311
311
311
311
368
368
368
368
349
349
349
349
419
419
419
419
94.5
94.5
94.5
94.5
90.5
90.5
90.5
90.5
409
409
409
409
489
489
489
489
168
168
168
168
190
190
190
190
263
288
263
263
184
209
184
209
225
250
225
225
133
158
133
160
40
40
30
30
37.5
37.5
37.5
37.5
60
60
65
65
65
65
75
75
55
55
55
55
55
55
55
55
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
110
110
110
110
110
110
110
110
42
42
42
42
42
42
42
42
18
18
18
18
18
18
20
20
Motor
size
GA
GB GC H
2501)
2502)
2503)
2504)
2805)
2806)
2807)
2808)
53
53
58
58
58
58
67.5
67.5
64
64
69
69
69
69
79.5
79.5
49
49
49
49
49
49
49
49
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
59
59
59
59
59
59
59
59
250
250
250
250
280
280
280
280
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
7)
8)
M20
M20
M20
M20
M20
M20
M20
M20
42
42
42
42
42
42
42
42
FA
16
16
16
16
16
16
16
16
HA HDB) HDC) HE
LC
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB) VEC)
40
40
30
30
40
40
40
40
22
22
22
22
24
24
24
24
875
900
875
900
875
900
875
900
992
1017
992
1017
992
1017
992
1017
2xFL13
2xFL13
2xFL13
2xFL13
2xFL21
2xFL21
2xFL21
2xFL21
93.5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
243
243
109.5
109.5
109.5
109.5
-
81.5
81.5
81.5
81.5
76.5
76.5
76.5
76.5
176.5
176.5
176.5
176.5
-
171.5
171.5
171.5
171.5
166.5
166.5
166.5
166.5
143
143
143
143
-
594
594
594
594
-
626
626
626
626
656
656
656
656
267.5
267.5
267.5
267.5
283.5
283.5
283.5
283.5
A)
B)
C)
D)
126.5
126.5
126.5
126.5
121.5
121.5
121.5
121.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
69
M3AA 250-280
Dimension drawings
M000047
M000046
2
M3AA 250-280
AC
AE
DA
DB
DC
ED)
EA
EG
EH
FA
GA
GB
GC
HBB)
HBC)
2507)
2508)
2509)
25010)
28011)
28012)
28013)
28014)
471
471
471
471
471
471
471
471
243
243
243
243
243
243
243
243
60
60
65
65
65
65
75
75
55
55
55
55
55
55
55
55
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
110
110
110
110
110
110
110
110
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
18
18
18
18
18
18
20
20
16
16
16
16
16
16
16
16
53
53
58
58
58
58
67.5
67.5
64
64
69
69
69
69
79.5
79.5
49
49
49
49
49
49
49
49
59
59
59
59
59
59
59
59
344
344
344
344
-
376
376
376
376
376
376
376
376
LA
LB
UBA)
VA
VB
VCB)
VCC)
VDB)
VDC)
VEB)
VEC)
875
900
875
900
875
900
875
900
25
25
25
25
25
25
25
25
735
760
735
760
735
760
735
760
500
500
500
500
500
500
500
500
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
2xFL13
2xFL13
2xFL13
2xFL13
2xFL21
2xFL21
2xFL21
2xFL21
93.5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
243
243
109.5
109.5
109.5
109.5
-
81.5
81.5
81.5
81.5
76.5
76.5
76.5
76.5
176.5
176.5
176.5
176.5
-
171.5
171.5
171.5
171.5
166.5
166.5
166.5
166.5
143
143
143
143
-
126.5
126.5
126.5
126.5
121.5
121.5
121.5
121.5
HE
267.5
267.5
267.5
267.5
283.5
283.5
283.5
283.5
Motor
size
1)
250
2502)
2503)
2504)
2805)
2806)
2807)
2808)
Tolerances
A,B
C, CA
D 55-65
DA 45-55
F, FA
H
N
LC
992
1017
992
1017
992
1017
992
1017
1)
ISO js14
+0 -2
ISO m6
ISO k6
ISO h9
+0 -0.5
ISO j6
2)
3)
4)
5)
6)
7)
8)
A)
B)
C)
D)
70
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
M3AA 250-280
Dimension drawings
M000050
M000049
2
M3AA 250-280
IM B35 (IM 2001), IM 2002
Motor
size
2501)
2502)
2503)
2504)
2805)
2806)
2807)
2808)
A
406
406
406
406
457
457
457
457
AA
78
78
78
78
103
103
103
103
Motor
size
250
250
250
250
280
280
280
280
40
40
30
30
40
40
40
40
1)
250
2502)
2503)
2504)
2805)
2806)
2807)
2808)
Tolerances
A,B
ISO js14
C, CA
+0 -2
D 55-65 ISO m6
DA 45-55 ISO k6
F, FA
ISO h9
H
+0 -0.5
N
ISO js6
AB
474
474
474
474
525
525
525
525
344
344
344
344
-
AC
471
471
471
471
471
471
471
471
376
376
376
376
376
376
376
376
AE
243
243
243
243
243
243
243
243
594
594
594
594
-
B
311
311
311
311
368
368
368
368
626
626
626
626
656
656
656
656
1)
2)
3)
4)
5)
6)
7)
8)
B
349
349
349
349
419
419
419
419
268
268
268
268
284
284
284
284
BA
94.5
94.5
94.5
94.5
90.5
90.5
90.5
90.5
BB
409
409
409
409
489
489
489
489
C
168
168
168
168
190
190
190
190
LA
LB
22
22
22
22
24
24
24
24
875
900
875
900
875
900
875
900
25
25
25
25
25
25
25
25
735
760
735
760
735
760
735
760
CA
263
288
263
263
184
209
184
209
CA
225
250
225
225
133
158
133
160
LC M
992
1017
992
1017
992
1017
992
1017
500
500
500
500
500
500
500
500
EA
110
110
110
110
110
110
110
110
EG
42
42
42
42
42
42
42
42
EH
42
42
42
42
42
42
42
42
F
18
18
18
18
18
18
20
20
FA
16
16
16
16
16
16
16
16
G
53
53
58
58
58
58
68
68
GA
64
64
69
69
69
69
80
80
GB
49
49
49
49
49
49
49
49
GC
59
59
59
59
59
59
59
59
D
60
60
65
65
65
65
75
75
DA
55
55
55
55
55
55
55
55
DB
M20
M20
M20
M20
M20
M20
M20
M20
T UBA)
VA
VB
VDC)
VEB) VEC)
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
93.5
243
243
243
243
243
243
243
243
110
110
110
110
-
171.5
171.5
171.5
171.5
166.5
166.5
166.5
166.5
143
143
143
143
-
A)
B)
C)
D)
DC
M20
M20
M20
M20
M20
M20
M20
M20
ED)
140
140
140
140
140
140
140
140
CB
40
40
30
30
38
38
38
38
2xFL13
2xFL13
2xFL13
2xFL13
2xFL21
2xFL21
2xFL21
2xFL21
81.5
81.5
81.5
81.5
76.5
76.5
76.5
76.5
176.5
176.5
176.5
176.5
-
126.5
126.5
126.5
126.5
121.5
121.5
121.5
121.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
71
AD
HB
HD
HE
M2AA
M2AA
M3AA
M3AA
M3AA
332.5
353
376
332.5
353
332.5
353
376
557
578
603
578
626
240
260.5
240
260.5
283.5
225 S/M
250 M
200 ML.
225 SM.
250 SM.
72
Motor
size
Dimensions
AD
HD
On request
300.5
321
344
376
Dimensions
AD
HB
248
269
292
292
123.5
141
141
211.5
226.5
248
269
292
292
HD
235.5
273
273
371.5
406.5
448
494
542
572
412.5
452
494
524
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Accessories
Protective roof and variable speed drives
Tacho
Variant codes; 472, 473, 572 and
573
M000059
M000058
M000057
Protective roof
Variant code 005
2
Variant
codes
Motor
size
56
63
71
80
90 S
90 L
100 L
1)
Motor
size
112
132
1601)
1802)
1803)
2004)
2005)
225 M
225 S
225 M
250 M
2)
3)
4)
5)
183
189
472, 473
572, 573
474, 476
477, 574
576, 577
216
224
261
288
318
343
385
352
373
275
287
313
304
326
352
373
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
005
183
189
472, 473
572, 573
474, 476
477, 574
576, 577
400
484
653.5
653.5
694.5
762.5
783
824
854
894
915
1015.5
1015.5
1056.5
1128.5
1149
1233
1263
1303
1325
493.5
580.5
870.5
870.5
911.5
983.5
1004
1088
1118
1158
1180
458.5
542
697
697
738
806
826.5
867
897
937
960
543.5
630.5
1015.5
1015.5
1056.5
1128.5
1149
1233
1263
1303
1325
On request.
Variant
codes;
M2AA
1)
005
Pole
2-4
2-4
2-4
2-4
4
4
2-4
2
4
4
2-4
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
73
Accessories
Protective roof and variable speed drives
Tacho
Variant codes; 472, 473, 572 and
573
M000059
M000058
M000057
Protective roof
Variant code 005
2
Variant
codes;
M3AA
005
183
189
472, 473
572, 573
474, 476
477, 574
576, 577
Motor
size
1121)
400
493.5
458.5
543.5
2)
428
538
487
588
1323)
484
580.5
542
630.5
4)
112
522
640
580
690
1605)
653.5
1015.5
870.5
697
1015.5
1606)
694.5
1056.5
911.5
738
1056.5
731
1097
952
774
1097
751.5
1117.5
972.5
795
1117.5
132
180
7)
1808)
9)
825
1234
1089
868
1234
20010)
865
1274
1129
908
1274
11)
885
1295
1150
930
1295
22512)
910
1320
1175
955
1320
13)
915
1325
1180
960
1325
22514)
940
1350
1205
985
1350
15)
922
1346
1201
969
1346
25016)
947
1371
1226
994
1371
17)
922
1346
1201
969
1346
28018)
947
1371
1226
994
1371
200
225
225
250
280
1)
2)
3)
4)
5)
6)
7)
74
M-6, M-8,
all 112 excl 1)
SA-2, S-4, S-6, MA-6, MB-6, S-8,
M-8, S-Two-speed
all 132 excl 3)
M-2, MA-2, M-4, M-6, M-8, MA-8,
L-2, L-4, L-6, MA-2/4, M-2/4, L-2/4,
M-4/6, M-4/8, LB-2, LB-4
L-8, L-4/6, L-4/8, LB-6, LB-8.
M-2, M-4, L-6, L-8, M-2/4, M-4/6,
M-4/8, LB-2
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Accessories
M000063
Ymax.
3
Motor
Rail
Xmax.
Plate
A
D
C
Motorsize
112-132
160-180
200-225
250-280
Type
TT132/10
TT180/12
TT225/16
TT280/20
Product code
3GZV103001-12
-14
-15
-16
A
65
75
82
116
B
40
42
50
70
C
530
700
864
1072
D
480
630
800
1000
E
52
57
68
90
F
17
17
17
20
G
26
26
27
27
H
M12
M12
M16
M18
L
120
120
140
150
M
M10
M12
M16
M20
N
45
50
65
80
O
17
20
weight
Xmax Ymax kg
360
420
7.8
520
580
12.0
670
740
20.4
870
940
43.0
Each set includes two complete slide rails including screw for
mounting the motor on the rails. Screws for mounting the rails
on the foundation are not included. Slide rails are supplied
with unmachined lower surfaces and should, prior to tightenng
down, be supported in a suitable manner.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
75
56
Material
Paint colour shade
Paint
63
71
80
90
100
Bearings
D-end
Single-speed motor N-end
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6201-2Z/C3
6203-2Z/C3
6202-2Z/C3
6204-2Z/C3
6203-2Z/C3
6205-2Z/C3
6204-2Z/C3
6306-2Z/C3
6205-2Z/C3
Bearings
Two-speed motor
D-end
N-end
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6201-2Z/C3
6203-2Z/C3
6202-2Z/C3
6204-2Z/C3
6203-2Z/C3
6205-2Z/C3
6204-2Z/C3
6306-2Z/C3
6205-2Z/C3
Axially-locked
bearings
Bearing seals
D-end
N-end
V-ring
Labyrinth seal.
Lubrication
D-end
Terminal box
Material
Surface treatment
Screws
Connections
Fan
Material
Fan cover
Material
Steel.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Stator winding
temperature sensors
Rotor winding
Material
Diecast aluminum.
Half key balancing.
Key ways
Closed keyway
On request
8W
25 W
Enclosure
IP 55.
Cooling method
IC 411.
Drain holes
Standard.
76
2 x (M20 + M25)
6
Optional.
Balancing method
Heating elements
2 x M20, 2 x Pg16
4
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
Size
Stator
Feet
M2AA
Material
112
132
160
180
200
Material
225
250
Bearings
D-end
Single-speed motor N-end
Bearings
Two-speed motor
D-end
N-end
NA
NA
Axially-locked
bearings
Bearing seals
D-end
N-end
Material
Surface treatment
Screws
2 x (2 x M40 + M16)
Screws
Max Cu-area mm2
M5
10
Cable lugs, 6 terminals
M6
35
Fan
Material
Fan cover
Material
Surface treatment
Polypropylene.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Connections
Terminal box
Stator winding
temperature sensors
Rotor winding
2 x FL13, 2 x M40
2 x FL 21, 2 x M63
(voltage code S)
M10
70
Optional.
Material
Key ways
Closed keyway
On request
PTC thermistors,
150C, 3 in series.
Diecast aluminum.
Balancing method
Heating elements
V-ring
Labyrinth seal.
Lubrication
Terminal box
6315/C3
6212/C3
25 W
50 W
Enclosure
IP 55.
Cooling method
IC 411.
Drain holes
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
77
Size
M3AA
112
132
160
180
200
225
250
Stator
Feet
Material
280
Material
Cast iron
Bearings
D-end
Single-speed motor N-end 2)
N-end 3)
Bearings
Two-speed motor
D-end
N-end 1)
N-end 2)
Axially-locked
bearings
D-end
Inner bearing cover D-end1)
1)
Foot motor. A spring washer at the N-end presses the motor towards the D-end.
Bearing seals
D-end
N-end
Lubrication
V-ring
Labyrinth seal. Except two-speed motors 112-132M,
outer and inner V-rings.
Valve lubrication.
Grease temp. range -40 to 150C.
Deep-drawn steel sheet, bolted to stator.
Phosphated. Polyester paint.
Terminal box
Material
Surface treatment
Screws
Connections
Knock-out openings
Flange-openings
2 x (M25 + M20)
Screws
Max Cu-area mm2
M5
10
Cable lugs, 6 terminals
Fan
Material
Fan cover
Material
Surface treatment
Polypropylene.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Terminal box
Stator winding
temperature sensors
Rotor winding
M6
35
Key ways
Closed keyway
On request
2 x FL21
2 x M63
1 x M16
Diecast aluminum.
Half key balancing.
25 W
Enclosure
IP 55.
Cooling method
IC 411.
78
2 x FL13, 2 x M40
2 x FL 21, 2 x M63
(voltage code S)
M10
70
Balancing method
Heating elements
2 x (2 x M40 + M16)
Optional.
Material
Cast iron
50 W
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Aluminum EN 12-2006
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
79
Mechanical design
Stator
The stator frame is made of profile-pressed sheet steel,
giving the motor high mechanical strength, low weight
and a good surface finish. The stator core is welded
into the stator frame and contributes to its excellent
mechanical properties.
Drain holes
Motors that will be operated in very humid or wet
environments, and especially under intermittent duty,
should be provided with drain holes. The appropriate
IM designation, such as IM V3 (IM 3031), is specified,
on the basis of the method of motor mounting.
M000064
M2CA motors are fitted with drain holes and plugs. The
Terminal box
Terminal boxes are mounted either on the top of the
motor, or on either side of the motor, see ordering
information.
In basic version the terminal box can be rotated 2x180
to allow cable entry from either side of the motor, as
option the terminal box can be turned 4x90.
Degree of protection of standard terminal box is IP 55.
80
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Top-mounted
Volt- Ter- Flange or adapter
age/ minal
freq. box
code
Side-mounted
TerFlange or adapter Cable box or
minal
cable gland
box
Gland
thread
Cable
diameter
Max.
conn.
cable
area
mm2
Terminal
bolt
size
D
E
355 L_
400 ML_
400 LK_
122/4
142/4
162/4
370
750
370
750
750
750
3GZF294730-749
3GZF294730-753
3GZF294730-944
3GZF294730-753
3GZF294730-944
3GZF294730-753
3GZF294730-944
3GZF294730-944
3GZF294730-944
122/5
142/6
162/7
370
750
370
750
750
750
3GZF294730-749
3GZF294730-753
3GZF294730-759
3GZF294730-753
3GZF294730-759
3GZF294730-753
3GZF294730-759
3GZF294730-759
3GZF294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
2x M63x1.5 2x 32-49
2x M63x1.5 2x 32-49
2x 48-60
2x M63x1.5 2x 32-49
2x 48-60
2x M63x1.5 2x 32-49
2x 48-60
2x 60-80
2x 60-80
2x150
2x240
4x240
2x240
4x240
2x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
122/4
142/4
162/4
370
750
370
750
750
750
750
750
3GZF294730-749
3GZF294730-753
3GZF294730-944
3GZF294730-753
3GZF294730-944
3GZF294730-753
3GZF294730-944
3GZF294730-944
3GZF294730-944
3GZF294730-944
3GZF294730-944
122/5
142/6
162/7
370
750
370
750
750
750
750
750
3GZF294730-749
3GZF294730-753
3GZF294730-759
3GZF294730-753
3GZF294730-759
3GZF294730-753
3GZF294730-759
3GZF294730-759
3GZF294730-759
3GZF294730-759
3GZF294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
2x M63x1.5 2x 32-49
2x M63x1.5 2x 32-49
2x 48-60
2x M63x1.5 2x 32-49
2x 48-60
2x M63x1.5 2x 32-49
2x 48-60
2x 60-80
2x 60-80
2x 60-80
2x 60-80
2x150
2x240
4x240
2x240
4x240
2x240
4x240
4x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
122/4
142/4
370
370
750
370
750
750
750
750
3GZF294730-749
3GZF294730-753
3GZF294730-753
3GZF294730-753
3GZF294730-944
3GZF294730-753
3GZF294730-944
3GZF294730-944
3GZF294730-944
3GZF294730-944
122/6
142/6
370
370
750
370
750
750
750
750
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-753
3GZF 294730-759
3GZF 294730-753
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
3GZF 294730-759
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x 32-49
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x M63x1.5 2x 32-49
2x 48-60
2x 48-60
2x 60-80
2x 60-80
2x150
2x240
2x240
2x240
4x240
2x240
4x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
122/4
142/4
370
370
370
3GZF294730-749
3GZF294730-753
3GZF294730-753
3GZF294730-753
3GZF294730-753
122/5
142/6
370
370
370
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-753
3GZF 294730-753
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x M63x1.5
2x150
2x240
2x240
2x240
2x240
M12
M12
M12
M12
M12
M12
M12
D
E
355 LKD
400 MLA
400 MLB
400 LK_
Voltage/frequency codes:
D = 380-420 VD 50 Hz, 660/690 VY 50 Hz, 440-480 VD 60 Hz
E = 500 VD 50 Hz, 575 VD 60 Hz
2x 32-49
2x 32-49
2x 32-49
2x 32-49
2x 32-49
Cable gland
122/4 2x3GZF294730-613
142/4 2x3GZF294730-613
M000065
280
315
355 SA, SB
355 MA
355 MB
Cable box
162/4 3GZF294730-301
Cable box
162/4 3GZF294730-301
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
81
M000340
Adapter
162/7 3GZF294730-759
Cable gland
122/5 2x3GZF294730-613
142/6 2x3GZF294730-613
Cable box
162/7 3GZF294730-301
Flange
122/5 3GZF294730-749
142/6 3GZF294730-753
Flange
370 3GZF294730-753
Cable box
750 3GZF294730-301
M000344, M000343
Cable box
750 3GZF294730-501
Cable gland
370 3GZF294730-613
Flange
3GZF294730-753
Cable gland
370 3GZF294730-613
Cable box
750 3GZF294730-301
750 3GZF294730-501
82
M000088
M000345
Adapter
750 3GZF294730-759
Inlet
62
193
62
193
M8
100
300
80
292
M10
115
370
100
360
M12
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Bearings
The motors are normally fitted with single-row deep
groove ball bearings as listed in the table below. The
complete ball bearing designation is stated on the rating
plate.
If the bearing at the D-end is replaced with a roller bearing (NU- or NJ-), higher radial forces can be handled.
Roller bearings are suitable for belt drive applications.
Bearing types
Motor
size
280
Number
of poles
2
4-12
315
2
4-12
355
2
4-12
400
2
4-12
1)
On request
Standard design
Alternative designs
Deep groove
ball bearings
D-end
N-end
Roller bearings
variant code 037
D-end
6316/C4
6316/C3
6316/C4
6319/C3
6316M/C3
6322/C3
6317M/C3
6322/C3
6316/C4
6316/C3
6316/C4
6316/C3
6316M/C3
6319/C3
6317M/C3
6319/C3
1)
NU 316/C3
1)
NU319/C3
1)
NU 322/C3
1)
NU 322/C3
Axially-locked bearings
The outer bearing ring at the D-end is axially locked
with an inner bearing cover. The inner ring is locked by
tight tolerance to the shaft.
All motors are equipped as standard with an axiallylocked bearing at the D-end.
Transport locking
Motors that have roller bearings or an angular contact
ball bearing are fitted with a transport lock before despatch to prevent damage to the bearings during transport. In case of transport locked bearing, the motor is
provided with a warning sign.
Locking may also be fitted in other cases where transport conditions are suspected of being potentially
damaging.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
83
Bearing seals
M2CA motors have, as standard, V-rings at both ends.
The size and type of suitable seals are in accordance
with the table below:
Standard design
Alternative design
Axial seal
D-end
N-end
10
10
VS 80
VS 80
VS 80
VS 80
80x100x101)
80x100x10
13.5
13.5
10
12
VS 80
VS 95
VS 80
VS 80
80x100x101)
95x120x12
120
140
13.5
15.5
12
12
VS 80
VS 110
VS 80
VS 95
80x100x101)
110x140x121)
2)
2)
140
15.5
12
VS 110
VS 95
Motor
size
Number
of poles
d1
d2
B1
280
2
4-12
80
80
100
100
13.5
13.5
315
2
4-12
80
95
100
120
355
2
4-12
95
110
400
2
4-12
110
2)
110x140x121)
Viton-seal
Labyrinth seal
M000069
1)
V-ring
3
Radial
seal
Bearing life
The nominal life L10 of a bearing is defined according
to ISO as the number of operating hours achieved or
exceeded by 90% of identical bearings in a large test
series under certain specified conditions. 50% of the
bearings achieve at least five times this figure.
Pulley diameter
When the desired bearing life has been determined, the
minimum permissible pulley diameter can be calculated
using FR, as follows:
D=
84
1.9 107 K P
n FR
where:
D = diameter of pulley, mm
P = power requirement, kW
n = motor speed, r/min
K = belt tension factor, dependent on belt type
and type of duty. A common value for
V-belts is 2.5.
FR = permissible radial force
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Permissible radial and axial force for a bearing life of 40,000 hours
Permissible radial force:
Motor
size
Number
of poles
Length of
shaft
extension
E (mm)
280
2
4
6
8
140
140
140
140
5800
7300
8300
9200
4800
6100
6800
7500
20000
22500
24700
10500
10500
10500
3700
4000
4900
5700
7050
7650
8800
9750
2600
2800
3400
4100
315
2
4
6
8
140
170
170
170
5800
8900
10300
11300
4900
7300
8500
9300
26500
29800
32500
10500
10500
11000
3600
4900
6150
6900
7400
9200
10700
11800
1800
2800
3300
4300
355
2
4
6
8
140
210
210
210
5800
12000
13500
15000
5100
9800
11300
12500
36700
41500
45200
17500
17000
17500
2400
3900
5100
6350
1)
1)
1)
1)
1)
1)
1)
1)
2
4
6
8
170
210
210
210
5800
11800
13600
15100
5100
10200
11700
12900
37300
42000
45700
16700
13500
16800
6700
3450
4750
5700
1)
1)
1)
1)
1)
1)
1)
1)
400
Roller bearing at
point of application:
FX0
FXmax
N
N
Direction of force
Outwards Upwards
N
N
Downwards
N
On request
M000145
1)
Ball bearing at
point of application:
FX0
FXmax
N
N
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
85
M000081
Rating plate
86
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
M2CA 315SMA
Pole number
4
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
132 kW
Product code
3GCA312210-ADA
Variant codes if needed
A
A
B
C
D,E,F, G
B
M2CA 315 SMA 3GCA 312 210 - ADA, 003 etc. C
1-4
5-6 7
8 - 10
11 12 13 14
Motor type
Motor size
Product code
D Mounting arrangement code
E Voltage/frequency code
F Generation code
Variant code
6
7
8
9
=
=
=
=
12 poles
> 12 poles
Two-speed motors
Multi-speed motors
Position 8 to 10
Serial number
Position 12
Mounting arrangement
A = Foot-mounted, top-mounted terminal box
R = Foot-mounted, terminal box RHS seen from D-end
L = Foot-mounted, terminal box LHS seen from D-end
B = Flange-mounted, large flange
H = Foot- and flange-mounted, top-mounted terminal
box
S = Foot- and flange-mounted, terminal box RHS seen
from D-end
T = Foot- and flange-mounted, terminal box LHS seen
from D-end
Position 13
Voltage and frequency code
See table below
Position 14
Generation code = A
For frame sizes 280 to 315 = A
For frame sizes 355 to 400 = C
Position 11
- (dash)
Code letters for supplementing the product code for voltage and frequency:
A
380 VY 50 Hz
B
380 V' 50 Hz
D
380-420 V' 50 Hz
660-690 VY 50 Hz
440-480 V' 60 Hz
E
500 V' 50 Hz
575 V' 60 Hz
F
500 VY 50 Hz
575 VY 60 Hz
S
220-240 V' 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
T
660 V' 50 Hz
U
690 V' 50 Hz
X
Other rated voltage,
connection or frequency,
max. 690 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
H
415 V' 50 Hz
87
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
75
90
110
132
160
200
200
250
280
315
355
400
450
500
560
2)
2)
2)
2)
2)
2)
2)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 MB
355 LA
355 LB
400 MLA
400 MLB
400 LKA
400 LKB
2)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
315 LC
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
281 110-A
281 210-A
311 110-A
311 210-A
311 320-A
311 510-A
351 110-C
351 310-C
351 320-C
351 510-C
351 520-C
401 410-C
401 420-C
401 810-C
401 820-C
132
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
2977
2975
2982
2982
2981
2978
2978
2983
2981
2980
2983
2985
2987
2987
2988
94.9
95.1
95.1
95.4
96.1
96.3
95.5
96.1
96.1
96.4
96.5
96.8
96.9
97.0
97.2
3GCA
3GCA
3GCA
3GCA
3GCA
281 320-A
281 330-A
281 340-A
311 520-A
311 530-A
2977
2976
2975
2980
2982
95.8
96.0
96.2
96.5
96.7
Torque
2.3
2.3
2.0
2.2
2.3
2.6
1.3
1.4
1.3
2.1
2.1
1.4
1.7
2.0
2.1
3.3
2.9
3.0
3.0
3.0
3.0
2.6
3.0
2.8
3.0
2.9
2.6
3.0
3.2
3.4
Basic design
94.6
94.9
94.4
94.9
95.6
95.9
95.2
95.6
95.7
96.1
96.2
96.5
96.7
96.8
97.0
0.88
0.90
0.86
0.88
0.89
0.90
0.89
0.89
0.89
0.89
0.88
0.88
0.90
0.90
0.89
131
152
194
228
269
334
338
422
472
535
603
675
743
825
940
400 V 50 Hz
Current
factor
cos M
100%
400 V 50 Hz
Power
7.5
7.6
7.6
7.4
7.5
7.8
6.4
7.2
6.8
7.0
7.7
7.2
7.7
8.0
7.8
241
289
352
423
513
641
641
800
897
1009
1136
1280
1438
1598
1790
High-output design
95.5
95.7
96.0
96.4
96.6
0.90
0.91
0.91
0.89
0.89
184
222
266
422
530
400 V 50 Hz
7.9
7.7
7.9
8.1
8.8
353
424
514
801
1009
2.4
2.6
2.8
2.8
3.2
3.0
3.0
3.1
2.9
3.2
Basic design
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
3GCA
3GCA
3GCA
282 110-A
282 210-A
312 110-A
1483
1484
1487
95.0
95.2
95.4
94.9
95.1
95.1
0.84
0.85
0.85
137
163
198
6.8
7.1
6.9
483
579
706
2.4
2.7
2.1
2.8
2.9
2.8
M2CA
315 SMA
3GCA
312 210-A
1486
95.6
95.5
0.85
238
6.7
848
2.2
2.7
160
2)
M2CA
315 MB
3GCA
312 320-A
1486
96.0
95.9
0.86
282
7.2
1028
2.4
2.9
200
2)
M2CA
315 LA
3GCA
312 510-A
1486
96.2
96.2
0.86
351
7.2
1285
2.5
2.9
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
355 SA
355 MA
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
352 110-C
352 310-C
352 510-C
352 520-C
352 840-C
402 410-C
402 420-C
402 810-C
402 820-C
1488
1489
1488
1489
1490
1491
1491
1491
1491
96.0
96.2
96.4
96.6
96.6
96.6
96.8
96.9
96.9
95.7
96.0
96.2
96.5
96.3
96.3
96.5
96.6
96.7
0.86
0.86
0.86
0.86
0.87
0.87
0.86
0.85
0.87
350
435
550
615
684
772
867
982
1077
7.3
7.5
7.3
7.5
7.7
7.4
7.8
7.4
7.5
1284
1603
2022
2277
2564
2882
3202
3587
4034
2.0
2.2
2.3
2.4
2.5
1.9
2.2
2.4
2.2
2.6
2.6
2.8
2.7
2.8
2.7
2.9
3.0
3.0
200
250
315
355
400
450
500
560
630
2)
2)
2)
2)
2)
2)
2)
400 V 50 Hz
High-output design
110
M2CA
280 MB
3GCA
282 320-A
1483
95.3
95.2
0.86
195
7.5
708
2.7
2.8
132
M2CA
280 MC
3GCA
282 330-A
1483
95.6
95.5
0.86
235
7.1
850
2.8
2.9
160
M2CA
280 MD
3GCA
282 340-A
1483
95.8
95.7
0.86
283
7.1
1030
2.8
3.1
250
2)
M2CA
315 LB
3GCA
312 520-A
1487
96.2
96.2
0.86
442
7.4
1605
2.5
2.9
315
2)
M2CA
315 LC
3GCA
312 530-A
1488
96.5
96.4
0.86
548
7.8
2022
2.6
3.2
1)
2)
88
The two bullets in the product code indicate choice of mounting arrangement, voltage and frequency (see ordering information page).
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Output kW
Motor type
Speed
r/min
Power Current
Effifactor IN
Efficiency cos M
Speed ciency
%
100% A
r/min
%
380 V 50 Hz
75
90
110
132
160
200
200
250
280
315
355
400
450
500
560
2974
2970
2980
2980
2979
2977
2975
2981
2978
2978
2981
2983
2986
2986
2986
2)
2)
2)
2)
2)
2)
2)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 MB
355 LA
355 LB
400 MLA
400 MLB
400 LKA
400 LKB
94.8
95.1
95.1
95.4
96.1
96.3
95.4
95.9
96.0
96.3
96.5
96.7
96.9
97.0
97.2
380 V 50 Hz
110
132
160
250
315
2974
2972
2971
2977
2979
2)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
315 LC
95.7
95.9
96.1
96.3
96.8
380 V 50 Hz
75
90
110
132
160
200
200
250
315
355
400
450
500
560
630
1481
1482
1486
1485
1485
1484
1487
1487
1487
1488
1488
1490
1491
1490
1490
2)
2)
2)
2)
2)
2)
2)
2)
2)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
94.8
95.1
95.3
95.5
95.9
96.1
95.9
96.1
96.3
96.5
96.5
96.5
96.7
96.8
96.8
380 V 50 Hz
110
132
160
250
315
1481
1481
1482
1485
1486
2)
2)
M2CA
M2CA
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
315 LB
315 LC
95.2
95.4
95.6
96.1
96.4
Current
IN
Power
factor
cos M
100%
Sound
Moment of
pressure
inertia
J = GD2 Weight level LP
kg
kgm2
dB(A)
0.87
0.89
0.85
0.87
0.89
0.90
0.89
0.88
0.88
0.89
0.87
0.88
0.89
0.89
0.88
127
147
190
222
262
321
327
410
460
515
585
652
724
802
910
0.8
0.9
1.2
1.4
1.7
2.1
2.5
2.7
2.7
3.4
3.5
6.3
6.9
7.8
7.9
415 V 50 Hz
0.89
0.90
0.87
0.89
0.90
0.90
0.90
0.90
0.90
0.89
0.89
0.89
0.90
0.91
0.90
137
159
202
238
282
350
353
439
492
560
627
705
782
858
980
2980
2978
2983
2983
2982
2981
2980
2984
2982
2982
2985
2986
2988
2988
2989
94.8
95.1
95.1
95.7
96.1
96.3
95.5
96.0
96.1
96.4
96.5
96.8
96.9
97.0
97.2
Basic design
415 V 50 Hz
0.91
0.91
0.91
0.89
0.90
193
233
280
444
552
2979
2978
2977
2982
2983
95.8
96.0
96.2
96.5
96.8
142
169
204
245
294
365
364
453
571
640
712
804
900
1022
1122
1485
1486
1488
1487
1487
1487
1489
1489
1489
1490
1490
1492
1492
1492
1492
95.0
95.2
95.3
95.5
96.0
96.2
96.0
96.2
96.4
96.6
96.6
96.6
96.8
96.9
96.9
0.90
0.90
0.90
0.89
0.89
179
213
255
408
508
204
245
295
457
570
1486
1485
1485
1488
1489
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
95.3
95.7
95.8
96.3
96.5
1.15
1.4
1.55
2.65
3.3
580
755
810
1230
1410
77
77
77
80
80
Basic design
0.82
0.83
0.83
0.84
0.85
0.85
0.85
0.85
0.85
0.85
0.86
0.86
0.84
0.84
0.86
134
159
198
232
277
342
341
424
538
602
665
752
855
972
1050
415 V 50 Hz
0.87
0.87
0.87
0.87
0.87
77
77
80
80
80
80
83
83
83
83
83
85
85
85
85
High-output design
415 V 50 Hz
0.86
0.86
0.86
0.86
0.87
0.87
0.87
0.87
0.87
0.87
0.88
0.88
0.87
0.86
0.88
480
545
695
770
840
975
1200
1260
1260
1480
1520
2050
2150
2450
2500
1.15
1.4
2
2.3
2.9
3.5
4.8
5.7
6.9
6.9
8.4
12
13
15
16
445
490
675
730
850
970
1200
1320
1550
1550
1900
2300
2400
2700
2800
68
68
71
71
71
71
80
80
80
80
85
85
85
85
85
High-output design
0.84
0.85
0.85
0.85
0.85
193
227
276
428
535
1.7
2.3
2.5
4.4
5.5
550
775
820
1200
1380
68
70
70
78
78
89
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
45
55
75
90
110
132
132
160
200
250
315
355
400
450
500
2)
2)
2)
2)
2)
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 SB
355 MA
355 MB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
M2CA
M2CA
M2CA
280 MB
280 MC
280 MD
Current
factor
cos M
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
0.82
0.83
0.80
0.83
0.83
0.84
0.84
0.83
0.83
0.80
0.82
0.84
0.84
0.83
0.83
85
102
143
165
201
241
238
290
363
470
577
630
710
808
898
6.6
6.6
7.1
7.1
7.3
6.7
6.8
7.2
7.5
7.7
7.4
7.3
7.6
7.8
7.7
2.5
2.5
2.3
2.3
2.5
2.4
2.0
2.3
2.4
2.9
2.6
2.0
2.2
2.3
2.4
2.5
2.5
2.7
2.7
2.8
2.7
2.4
2.5
2.6
3.0
2.7
2.4
2.7
2.6
2.5
400 V 50 Hz
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
283 110-A
283 210-A
313 110-A
313 210-A
313 320-A
313 510-A
353 110-C
353 120-C
353 310-C
353 320-C
353 840-C
402 410-C
402 420-C
402 810-C
402 820-C
Power
990
989
992
991
991
990
992
992
992
993
992
993
994
994
994
94.1
94.4
94.9
95.3
95.3
95.4
95.3
95.5
95.8
96.0
96.2
96.5
96.5
96.7
96.7
Basic design
94.0
94.3
94.7
95.2
95.1
95.3
95.0
95.3
95.6
95.7
96.0
96.4
96.4
96.5
96.6
400 V 50 Hz
3GCA
3GCA
3GCA
283 320-A
283 330-A
283 340-A
990
989
990
94.5
94.9
95.2
Torque
434
531
722
867
1060
1273
1271
1540
1925
2404
3032
3414
3843
4323
4803
High-output design
94.4
94.8
95.1
0.83
0.83
0.83
139
168
202
400 V 50 Hz
7.3
7.4
7.9
723
869
1061
2.8
2.9
3.1
2.7
2.9
3.0
Basic design
37
M2CA
280 SA
3GCA
284 110-A
741
93.4
93.1
0.78
74
7.3
477
1.8
3.1
45
55
75
90
110
110
132
160
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 MB
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
284 210-A
314 110-A
314 210-A
314 320-A
314 510-A
354 110-C
354 310-C
354 320-C
741
741
740
740
740
743
743
744
94.0
94.0
94.5
94.7
94.8
94.9
95.1
95.3
93.8
93.7
94.2
94.5
94.7
94.8
95.0
95.2
0.78
0.80
0.81
0.82
0.83
0.80
0.80
0.79
90
107
142
169
202
208
250
306
7.6
7.1
7.1
7.3
7.0
6.0
6.2
6.8
580
710
968
1161
1420
1414
1697
2054
1.9
1.8
1.8
1.9
1.9
1.0
1.0
1.2
3.2
2.8
2.8
2.8
2.7
2.4
2.4
2.7
2)
2)
1)
2)
90
M2CA
280 MB
400 V 50 Hz
3GCA
284 320-A
741
94.4
High-output design
94.2
0.79
108
7.8
709
1.9
3.2
The two bullets in the product code indicate choice of mounting arrangement, voltage and frequency (see ordering information page).
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Output kW
Motor type
Speed
r/min
Power Current
Effifactor IN
Efficiency cos M
Speed ciency
%
100% A
r/min
%
380 V 50 Hz
45
55
75
90
110
132
132
160
200
250
315
355
400
450
500
988
988
991
990
990
988
991
991
991
993
991
993
993
993
993
2)
2)
2)
2)
2)
1)
1)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 SB
355 MA
355 MB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
94.0
94.3
94.8
95.2
95.1
95.3
95.2
95.4
95.7
96.0
96.1
96.5
96.5
96.7
96.7
380 V 50 Hz
75
90
110
988
988
988
M2CA 280 MB
M2CA 280 MC
M2CA 280 MD
94.5
94.8
95.1
380 V 50 Hz
37
45
55
75
90
110
110
132
160
740
740
740
739
739
738
742
742
743
2)
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
315 SA
315 SMA
315 MB
315 LA
355 SA
355 MA
355 MB
93.2
93.8
93.9
94.3
94.6
94.7
94.8
95.1
95.3
380 V 50 Hz
55
740
M2CA 280 MB
94.2
Power
factor
cos M
100%
Current
IN
A
Sound
Moment of
pressure
inertia
J = GD2 Weight level LP
kg
kgm2
dB(A)
82
99
143
162
198
234
232
284
354
465
567
615
696
796
884
1.65
2
2.9
3.8
4.5
5.4
6.8
7.6
9
10.6
13.2
18
18
21
21
415 V 50 Hz
0.83
0.84
0.82
0.84
0.84
0.84
0.85
0.84
0.84
0.83
0.83
0.85
0.85
0.84
0.84
89
106
146
173
212
252
248
302
377
477
597
655
735
838
930
991
991
993
992
992
991
993
993
993
994
993
994
994
995
994
94.2
94.4
94.9
95.3
95.3
95.4
95.3
95.5
95.8
96.0
96.2
96.6
96.5
96.7
96.7
Basic design
0.81
0.82
0.77
0.82
0.82
0.83
0.83
0.82
0.82
0.78
0.80
0.83
0.82
0.81
0.81
415 V 50 Hz
0.84
0.84
0.84
144
174
210
991
990
991
94.5
94.9
95.2
75
92
108
148
175
213
216
259
315
742
742
742
741
741
740
744
744
744
93.4
93.8
94.0
94.3
94.6
94.8
94.9
95.2
95.3
0.81
0.81
0.81
137
164
200
110
742
94.4
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
2.6
3.1
4.1
545
815
835
67
67
67
Basic design
0.76
0.75
0.78
0.79
0.80
0.81
0.79
0.78
0.77
73
90
105
138
165
198
204
246
303
415 V 50 Hz
0.81
66
66
72
72
75
75
79
79
79
79
79
80
80
80
80
High-output design
415 V 50 Hz
0.80
0.80
0.82
0.82
0.83
0.84
0.81
0.81
0.81
440
475
630
720
805
910
1150
1220
1400
1550
1900
2400
2400
2700
2700
1.85
2.2
2.9
3.8
4.5
5.4
6.8
7.6
9
460
500
630
715
800
900
1150
1220
1400
65
65
70
70
77
77
75
75
75
High-output design
0.77
106
2.85
575
65
91
Motor type
Product code
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
280 MB
315 SMA
315 MB
315 LA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
280 MB
315 SMA
315 MB
315 LA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
288 114-A
288 214-A
288 324-A
318 214-A
318 324-A
318 514-A
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
M2CA
280 SA
280 SMA
280 MB
315 SMA
315 MB
315 LA
315 LB
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
3GCA
Torque
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1487/991
1486/991
1485/991
1489/992
1488/992
1488/991
93.5/88.0
93.9/89.3
94.2/89.8
95.2/91.2
95.5/92.2
95.7/92.6
288 119-A
288 219-A
288 329-A
318 219-A
318 329-A
318 519-A
1484/743
1486/743
1486/742
1487/744
1486/746
1486/743
93.2/90.0
93.8/91.5
94.1/91.8
94.6/92.5
94.9/93.0
95.2/93.4
0.82/0.76
0.83/0.76
0.86/0.78
0.85/0.78
0.86/0.79
0.87/0.79
113/40
144/54
161/58
199/67
219/75
260/88
7.7/7.4
7.6/7.7
7.4/7.7
6.6/6.5
6.6/6.4
6.6/6.4
1486/987
1486/987
1488/989
1488/990
1490/989
1489/990
1491/990
92.0/90.5
92.6/91.8
93.2/92.6
94.3/93.5
94.9/93.9
95.1/94.1
95.3/94.5
400 V 50 Hz
385/178
495/241
579/270
706/308
802/356
963/424
2.3/2.9
2.4/3.2
2.3/3.2
1.9/2.8
1.9/2.9
1.9/3.0
3.0/2.6
2.9/2.7
2.7/2.8
2.6/2.9
2.4/2.8
2.4/2.7
1.15
1.4
1.7
2.3
2.9
3.5
445
490
550
730
850
970
121/38
150/50
164/56
197/56
235/65
283/80
400 V 50 Hz
289 114-A
289 214-A
289 324-A
319 214-A
319 324-A
319 514-A
319 524-A
Moment
of inertia
J=
Weight
GD2
kgm2
kg
400 V 50 Hz
Speed
r/min
Power
factor
cos M
400 V 50 Hz
Efficiency
%
7.5/5.3
8.5/5.4
8.8/5.4
6.8/4.9
6.8/4.8
7.0/4.8
418/193
514/257
578/296
706/282
848/334
1028/411
2.7/2.8
3.3/2.9
3.6/2.8
1.9/2.1
2.0/2.0
2.1/2.1
2.9/2.3
3.4/2.6
3.5/2.6
2.6/2.5
2.6/2.4
2.7/2.5
1.15
1.4
1.7
2.3
2.9
3.5
445
490
550
730
850
970
94/65
111/82
131/96
161/121
195/147
238/181
287/213
6.9/6.2
7.1/6.6
8.0/7.4
5.9/5.8
6.8/5.6
6.7/6.0
7.2/5.8
321/310
386/387
450/454
577/579
705/724
847/868
1025/1061
2.0/2.5
2.1/2.8
2.6/3.4
1.5/2.6
1.9/2.7
1.9/3.1
2.1/2.8
2.6/2.2
2.7/2.3
3.1/2.5
2.3/2.4
2.6/2.3
2.7/2.7
2.7/2.3
1.15
1.4
1.7
2.3
2.9
3.5
3.9
445
490
550
730
850
970
1000
50/32
65/40
85/50
M2CA 280 SA
3GCA 289 119-A 1486/743 92.7/91.8 0.88/0.70 89/72
7.2/6.9 321/411
M2CA 280 SMA 3GCA 289 219-A 1486/743 93.1/92.0 0.88/0.69 115/92 7.7/7.2 418/514
M2CA 280 MB 3GCA 289 329-A 1487/743 93.8/92.8 0.88/0.68 149/115 8.5/7.7 546/643
460
500
575
100/65
M2CA 315 SMA 3GCA 319 219-A 1487/742 94.2/93.8 0.89/0.74 174/137 6.5/6.3 642/836
755
120/75
M2CA 315 MB
845
150/95
M2CA 315 LA
3GCA 319 519-A 1486/742 94.7/94.2 0.89/0.72 262/204 7.2/6.5 964/1223 2.0/2.4 2.8/2.6 5.8
950
The two bullets in the product code indicate choice of mounting arrangement, voltage and frequency (see ordering information page).
92
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Variant
1)
Motor size
280
315
355
400
Balancing
052
417
423
424
037
040
041
042
043
SPM nipples.
058
Angular contact ball bearing at D-end, shaft force away from bearing. Transport
lock included.
060
107
130
188
63-series bearings.
420
796
Grease nipples JIS B 1575 PT 1/8 Type A. Stainless steel. Head type to be defined
M
when ordering.
Manilla connection.
178
209
425
Cooling system
044
045
053
068
Metal fan.
075
Coupling
035
Dimension drawing
141
Drain holes
065
Earthing bolt
067
1)
S = Included as standard
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
93
Code
Variant
1)
Motor size
280
315
355
400
Heating elements
450
451
Mounting arrangements
009
IM 2001 foot/flange mounted, IEC flange, from IM 1001 (B35 from B3).
066
Painting
114
179
Protection
005
072
158
403
002
003
095
135
139
161
070
165
410
121
122
123
125
Bimetal detectors, break type (NCC), (2x3 in series), 150C, in stator winding.
127
Bimetal detectors, break type (NCC), (3 in series, 130C & 3 in series, 150C),
in stator winding.
435
436
437
439
1)
94
S = Included as standard
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Code
Variant
1)
Motor size
280
315
355
400
441
442
445
446
502
503
Terminal box
019
021
180
136
137
157
187
230
402
413
418
468
469
731
Testing
145
146
Type test with report for motor from specific delivery batch.
147
Type test with report for motor from spec del batch, customer witnessed.
148
149
221
Type test and multi-point load test with report for motor from specific delivery
batch.
Torque/speed curve, type test and multi-point load test with report for motor from
specific delivery batch.
222
760
761
762
763
Y/D-starting
117
118
119
1)
S = Included as standard
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
95
Sizes 280-315
Dimension drawings
M000070
Motor
size
280 SA
Poles A
2
4-8
280 SMA 2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
315 SA
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Motor
size
280 SA
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB
315 LC
AB
AC
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
457
457
457
457
457
457
457
457
508
508
508
508
508
508
508
508
508
508
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
545
545
545
545
545
545
545
545
622
622
622
622
622
622
622
622
622
622
555
555
555
555
555
555
555
555
624
624
624
624
624
624
624
624
624
624
368
368
368
368
419
419
419
419
406
406
406
406
457
457
508
508
508
508
419
419
457
457
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
501
450
501
501
501
501
501
501
539
539
539
539
539
539
592
592
592
592
190
190
190
190
190
190
190
190
216
216
216
216
216
216
216
216
216
216
372
302
372
372
381
381
381
381
343
343
443
343
392
392
411
411
411
411
321
321
392
292
65
75
65
75
65
75
65
75
65
80
65
80
65
80
65
90
65
90
60
65
60
65
60
65
60
65
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
Poles F
FA
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
96
AA
1)
O
2)
18
20
18
20
18
20
18
20
18
20
18
22
18
22
18
22
18
25
18
25
18
25
18
18
18
18
18
18
18
18
18
18
18
20
18
20
18
20
18
20
18
20
18
20
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
58
81
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
69
95
53
58
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
1)
H ISO 0, -1.0
2)
3)
64
69
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
14
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
11
12
280
280
280
280
280
280
280
280
280
280
315
315
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
555
558
558
558
627
627
627
627
627
627
627
627
627
627
627
627
730
730
730
730
730
730
730
730
730
730
820
820
820
820
820
820
820
820
820
820
848
848
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1545
1575
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1695
1725
1695
1725
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
390
420
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Sizes 280-315
Dimension drawings
M000071
Motor
size
280 SA
AA
AB
AD
BA
BB
CA
CA
DA DB
DC
EA
EG
EH
2
4-8
280 SMA
2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
315 SA
2
4-8
315 SMA
2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
457
457
457
457
457
457
457
457
508
508
508
508
508
508
508
508
508
508
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
545
545
545
545
545
545
545
545
622
622
622
622
622
622
622
622
622
622
448
448
448
448
448
448
448
448
502
502
502
502
502
502
502
502
502
502
368
368
368
368
419
419
419
419
406
406
406
406
457
457
508
508
508
508
419
419
457
457
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
501
450
501
501
501
501
501
501
539
539
539
539
539
539
592
592
592
592
190
190
190
190
190
190
190
190
216
216
216
216
216
216
216
216
216
216
372
302
372
372
381
381
381
381
343
343
443
343
392
392
411
411
411
411
321
321
392
292
65
75
65
75
65
75
65
75
65
80
65
80
65
80
65
90
65
90
60
65
60
65
60
65
60
65
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
Motor
size
280 SA
FA
GA
GB
GC GD
GF
HA
HC
HD
LC
LD
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB,LC
Poles
1)
Poles
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
O
2)
18
20
18
20
18
20
18
20
18
20
18
22
18
22
18
22
18
25
18
25
18
18
18
18
18
18
18
18
18
18
18
20
18
20
18
20
18
20
18
20
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
53
58
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
1)
H ISO 0, -1.0
2)
3)
64
69
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
280
280
280
280
280
280
280
280
280
280
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
558
558
558
558
627
627
627
627
627
627
627
627
627
627
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
620
620
620
620
620
620
620
620
620
620
685
685
685
685
685
685
685
685
685
685
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1695
1575
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
Sizes 280-315
Dimension drawings
M000074
Flange-mounted; IM B5 (IM 3001), V1 (IM 3011), V3 (IM 3031) and IM B14 (IM 3601),
V18 (IM 3611), V19 (IM 3631)
Motor
size
280 SA
280 SMA
280 MB
280 MC,MD
315 SA
315 SMA
315 MB
315 LA
315 LB,LC
Motor
size
280 SA
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB
315 LC
Poles
AC
DA
DB
DC
EA
EG
EH
FA
GA
GB
GC
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
555
555
555
555
555
555
555
555
624
624
624
624
624
624
624
624
624
624
65
75
65
75
65
75
65
75
65
80
65
80
65
80
65
90
65
90
60
65
60
65
60
65
60
65
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
18
20
18
20
18
20
18
20
18
22
18
22
18
22
18
25
18
25
18
18
18
18
18
18
18
18
18
20
18
20
18
20
18
20
18
20
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
Poles
GD
GF
HB
LA
LB
LC
LD
550
550
550
550
550
550
550
550
550
550
660
660
660
660
660
660
660
660
660
660
660
660
18
18
18
18
18
18
18
18
18
18
23
23
23
23
23
23
23
23
23
23
23
23
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
1)
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
Tolerances:
D,DA
ISO m6
F, FA
ISO h9
N
ISO j6
98
2)
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
14
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
11
12
450
450
450
450
450
450
450
450
450
450
505
505
505
505
505
505
505
505
505
505
505
526
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1545
1575
1)
2)
3)
22
22
22
22
22
22
22
22
22
22
25
25
25
25
25
25
25
25
25
25
25
25
920
850
920
920
980
980
980
980
980
980
955
955
1055
955
1055
1055
1125
1125
1125
1405
1125
1405
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1415
1725
1415
1725
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
390
420
500
500
500
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
600
600
600
450
450
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
550
550
550
550
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Sizes 280-315
Dimension drawings
M000076
Foot- and flange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box top mounted
Motor
size
Poles A
AA
AB
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
1)
280 SA
2
4-8
280 SMA 2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
457
457
457
457
457
457
457
457
80
80
80
80
80
80
80
80
545
545
545
545
545
545
545
545
368
368
368
368
419
419
419
419
419
419
100
100
100
100
100
100
100
100
501
501
501
501
501
501
501
501
190
190
190
190
190
190
190
190
372
302
372
372
381
381
381
381
321
321
65
75
65
75
65
75
65
75
60
65
60
65
60
65
60
65
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
18
20
18
20
18
20
18
20
18
18
18
18
18
18
18
18
315 SA
508
508
508
508
508
508
508
508
508
508
100
100
100
100
100
100
100
100
100
100
622
622
622
622
622
622
622
622
622
622
406
406
406
406
457
457
508
508
508
508
457
457
100
100
100
100
100
100
100
100
100
100
539
539
539
539
539
539
592
592
592
592
216
216
216
216
216
216
216
216
216
216
343
343
443
343
392
392
411
411
411
411
392
292
65
80
65
80
65
80
65
90
65
90
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
18
22
18
22
18
22
18
25
18
25
18
20
18
20
18
20
18
20
18
20
GA
GB
GC
GD GF H
HA HC
HD
LD
550
550
550
550
550
550
550
550
550
550
660
660
660
660
660
660
660
660
660
660
660
660
18
18
18
18
18
18
18
18
18
18
23
23
23
23
23
23
23
23
23
23
23
23
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Motor
size
280 SA
280 SMA
280 MB
280 MC
280 MD
315 SA
315 SMA
315 MB
315 LA
315 LB
315 LC
Poles G
LA
LC
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
2
4
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
2)
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
58
71
58
71
58
71
58
81
58
81
58
81
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
69
85
69
85
69
85
69
95
69
95
69
95
53
58
53
58
53
58
53
58
53
58
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
64
69
64
69
64
69
64
69
64
69
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
11
12
11
12
11
12
11
12
11
12
11
14
11
14
11
14
11
14
11
14
11
14
1)
H ISO 0, -1.0
N ISO j6
2)
3)
11
11
11
11
11
11
11
11
11
11
11
12
11
12
11
12
11
12
11
12
11
12
280
280
280
280
280
280
280
280
280
280
315
315
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
558
558
558
558
627
627
627
627
627
627
627
627
627
627
627
627
730
730
730
730
730
730
730
730
730
730
820
820
820
820
820
820
820
820
820
820
848
848
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
1060
990
1060
1060
1120
1120
1255
1225
1255
1255
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1545
1575
22
22
22
22
22
22
22
22
22
22
25
25
25
25
25
25
25
25
25
25
25
25
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
1245
1275
1345
1275
1345
1375
1415
1445
1695
1725
1695
1725
385
385
385
385
385
385
385
385
385
385
390
420
390
420
390
420
390
420
390
420
390
420
500
500
500
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
600
600
600
450
450
450
450
450
450
450
450
450
450
550
550
550
550
550
550
550
550
550
550
550
550
100
100
100
100
100
100
100
100
100
100
115
115
115
115
115
115
115
115
115
115
115
115
Sizes 280-315
Dimension drawings
M000077
Foot- and flange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box side mounted
Motor
size
Poles A
AA
AB
AD
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
1)
280 SA
2
4-8
280 SMA 2
4-8
280 MB
2
4-8
280 MC,MD 2
4-8
457
457
457
457
457
457
457
457
80
80
80
80
80
80
80
80
545
545
545
545
545
545
545
545
448
448
448
448
448
448
448
448
368
368
368
368
419
419
419
419
419
419
100
100
100
100
100
100
100
100
501
501
501
501
501
501
501
501
190
190
190
190
190
190
190
190
372
302
372
372
381
381
381
381
321
321
65
75
65
75
65
75
65
75
60
65
60
65
60
65
60
65
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
18
20
18
20
18
20
18
20
18
18
18
18
18
18
18
18
315 SA
508
508
508
508
508
508
508
508
508
508
100
100
100
100
100
100
100
100
100
100
622
622
622
622
622
622
622
622
622
622
502
502
502
502
502
502
502
502
502
502
406
406
406
406
457
457
508
508
508
508
457
457
100
100
100
100
100
100
100
100
100
100
539
539
539
539
539
539
592
592
592
592
216
216
216
216
216
216
216
216
216
216
343
343
443
343
392
392
411
411
411
411
392
292
65
80
65
80
65
80
65
90
65
90
60
75
60
75
60
75
60
75
60
75
M20
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
140
170
140
170
140
170
140
170
140
170
140
140
140
140
140
140
140
140
140
140
40
40
40
40
40
40
40
48
40
48
40
40
40
40
40
40
40
40
40
40
18
22
18
22
18
22
18
25
18
25
18
20
18
20
18
20
18
20
18
20
GA
GB
GC
GD
GF
HA
HC
HD
LC
LD
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Motor
size
280 SA
280 SMA
280 MB
280 MC
280 MD
Poles G
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
315 SA
2
4-8
315 SMA 2
4-8
315 MB
2
4-8
315 LA
2
4-8
315 LB,LC 2
4-8
Tolerances:
A, B
ISO js14
D,DA
ISO m6
F, FA
ISO h9
100
2)
58
67.5
58
67.5
58
67.5
58
67.5
58
67.5
69
79.5
69
79.5
69
79.5
69
79.5
69
79.5
53
58
53
58
53
58
53
58
53
58
64
69
64
69
64
69
64
69
64
69
11
12
11
12
11
12
11
12
11
12
11
11
11
11
11
11
11
11
11
11
280
280
280
280
280
280
280
280
280
280
32
32
32
32
32
32
32
32
32
32
558
558
558
558
558
558
558
558
558
558
620
620
620
620
620
620
620
620
620
620
24
24
24
24
24
24
24
24
24
24
1060
990
1060
1060
1120
1120
1255
1255
1255
1255
1210
1140
1210
1210
1270
1270
1405
1405
1405
1405
385
385
385
385
385
385
385
385
385
385
500
500
500
500
500
500
500
500
500
500
450
450
450
450
450
450
450
450
450
450
100
100
100
100
100
100
100
100
100
100
550
550
550
550
550
550
550
550
550
550
18
18
18
18
18
18
18
18
18
18
5
5
5
5
5
5
5
5
5
5
58
71
58
71
58
71
58
81
58
81
69
85
69
85
69
85
69
95
69
95
53
67.5
53
67.5
53
67.5
53
67.5
53
67.5
64
79.5
64
79.5
64
79.5
64
79.5
64
79.5
11
14
11
14
11
14
11
14
11
14
11
12
11
12
11
12
11
12
11
12
315
315
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
627
627
627
627
627
627
627
627
627
627
685
685
685
685
685
685
685
685
685
685
28
28
28
28
28
28
28
28
28
28
1095
1125
1195
1125
1195
1225
1265
1295
1545
1575
1245
1275
1345
1275
1345
1375
1415
1445
1695
1725
390
420
390
420
390
420
390
420
390
420
600
600
600
600
600
600
600
600
600
600
550
550
550
550
550
550
550
550
550
550
115
115
115
115
115
115
115
115
115
115
660
660
660
660
660
660
660
660
660
660
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
1)
H ISO 0, -1.0
N ISO j6
2)
3)
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Sizes 355-400
Dimension drawings
M000347
M000346
Motor
size
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
Motor
size
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
AA
AB
AC
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
720
720
720
720
720
720
720
720
720
720
720
810
810
810
810
810
810
810
810
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
423
423
423
423
423
423
433
433
433
433
590
595
595
595
595
655
655
655
655
510
515
515
515
515
565
565
565
565
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
Poles
FA
GA
GB
GC
GD
GF
Poles
1)
HA
HC
1)
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
Tolerances:
A, B ISO js14
D,DA ISO m6
F, FA ISO h9
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
1)
ISO 0, -1.0
2)
3)
4)
5)
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
HD
HD
4)
5)
900
900
900
900
900
900
915
915
915
915
915
915
915
915
915
1000
1000
1000
1000
1000
1000
1000
1000
LC
LD
O
2)
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1317
1387
1377
1447
1377
1447
1457
1527
1457
1527
1667
1628
1698
1628
1698
1798
1838
1798
1838
1467
1567
1527
1627
1527
1627
1607
1707
1607
1707
1854
1785
1885
1785
1885
1955
2025
1955
2025
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
Sizes 355-400
Dimension drawings
M000348
M000346
Motor
size
Poles
355 SA,SB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
Poles
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
Motor size
AA
AB
1)
AD
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
423
423
423
423
423
423
433
433
433
433
590
595
595
595
595
655
655
655
655
510
515
515
515
515
565
565
565
565
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
HA
HC
4)
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
FA
583
583
583
583
583
583
583
583
583
583
583
615
615
615
615
615
615
615
615
GA
GB
GC
GD
GF
HD
LC
LD
1)
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
Tolerances:
A, B ISO js14
D,DA ISO m6
F, FA ISO h9
102
O
2)
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
1)
ISO 0, -1.0
2)
3)
4)
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
777
777
777
777
777
777
777
777
777
777
777
862
862
862
862
862
862
862
862
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1317
1387
1377
1447
1377
1447
1457
1527
1457
1527
1667
1628
1698
1628
1698
1798
1838
1798
1838
1467
1567
1527
1627
1527
1627
1607
1707
1607
1707
1854
1785
1885
1785
1885
1955
2025
1955
2025
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Sizes 355-400
Dimension drawings
M000349
M000346
Flange-mounted; IM B5 (IM 3001), V1 (IM 3011), V3 (IM 3031) and IM B14 (IM 3601),
V18 (IM 3611), V19 (IM 3631)
Motor
size
Poles
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
Motor size
AC
DA
DB
DC
EA
EG
EH
FA
GA
GB
GC
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
720
720
720
720
720
720
720
720
720
720
720
810
810
810
810
810
810
810
810
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
81
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
Poles
GD
GF
HB
HB
LA
LB
LC
LD
4)
5)
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1)
1)
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
Tolerances:
D,DA ISO m6
F, FA ISO h9
N
ISO j6
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
545
545
545
545
545
545
2)
560
560
560
560
560
560
560
560
560
600
600
600
600
600
600
600
600
1)
2)
3)
4)
5)
1317
1387
1377
1447
1377
1447
1457
1527
1457
1527
1667
1628
1698
1628
1698
1798
1838
1798
1838
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
1177
1177
1237
1237
1237
1237
1317
1317
1317
1317
1457
1488
1488
1488
1488
1628
1628
1628
1628
1467
1567
1527
1627
1527
1627
1607
1707
1607
1707
1854
1785
1885
1785
1885
1955
2025
1955
2025
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
103
Sizes 355-400
Dimension drawings
M000350
M000346
Foot- and flange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box top mounted
Motor
size
AA
AB
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
433
433
433
433
433
433
443
443
443
443
590
595
595
595
595
655
655
655
655
510
515
515
515
515
565
565
565
565
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
Motor
size
Poles
GA
GB
GC
355 SA,SB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
355 SA,SB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
Poles
1)
Tolerances:
A, B ISO js14
D,DA ISO m6
F, FA ISO h9
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
1)
H
N
ISO 0, -1.0
ISO j6
2)
3)
4)
5)
104
GD GF
HA HC
1)
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
HD
HD
4)
5)
900
900
900
900
900
900
915
915
915
915
915
915
915
915
915
1000
1000
1000
1000
1000
1000
1000
1000
LC
LD
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
2)
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1317
1387
1377
1447
1377
1447
1457
1527
1457
1527
1667
1628
1698
1628
1698
1798
1838
1798
1838
1467
1567
1527
1627
1527
1627
1607
1707
1607
1707
1854
1785
1885
1785
1885
1955
2025
1955
2025
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Sizes 355-400
Dimension drawings
M000351
M000346
Foot- and flange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
terminal box side mounted
Motor
size
Poles A
355 SA,SB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
610
610
610
610
610
610
610
610
610
610
610
686
686
686
686
686
686
686
686
110
110
110
110
110
110
110
110
110
110
110
140
140
140
140
140
140
140
140
714
714
714
714
714
714
714
714
714
714
714
820
820
820
820
820
820
820
820
Motor
size
Poles
GA
GB
355 SA,SB
2
4-8
2
4-8
2
4-8
2
4-8
2
4-8
4-8
2
4-8
2
4-8
2
4-8
2
4-8
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
355 MA
355 MB
355 LA
355 LB
355 LKD
400 MLA
400 MLB
400 LKA
400 LKB
AA
AB
1)
AD
BA
BB
CA
CA
DA
DB
DC
EA
EG
EH
FA
500
500
560
560
560
560
630
630
630
630
630
630
630
630
630
710
710
710
710
710
710
710
710
710
800
800
800
800
100
100
100
100
100
100
100
100
100
100
100
140
140
140
140
140
140
140
140
584
584
644
644
644
644
714
714
714
714
802
850
850
850
850
935
935
935
935
254
254
254
254
254
254
254
254
254
254
254
280
280
280
280
280
280
280
280
423
423
423
423
423
423
433
433
433
433
590
595
595
595
595
655
655
655
655
510
515
515
515
515
565
565
565
565
70
100
70
100
70
100
70
100
70
100
100
70
100
70
100
80
100
80
100
70
90
70
90
70
90
70
90
70
90
90
70
90
70
90
75
90
75
90
M20
M24
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M24
M20
M24
M20
M24
M20
M24
M20
M24
140
210
140
210
140
210
140
210
140
210
210
140
210
140
210
170
210
170
210
140
170
140
170
140
170
140
170
140
170
170
140
170
140
170
140
170
140
170
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
40
48
48
40
48
40
48
40
48
40
48
20
28
20
28
20
28
20
28
20
28
28
20
28
20
28
22
28
22
28
20
25
20
25
20
25
20
25
20
25
25
20
25
20
25
20
25
20
25
4)
583
583
583
583
583
583
583
583
583
583
583
615
615
615
615
615
615
615
615
GC
GD
GF
HA
HC
HD
LC
LD
1)
Tolerances:
A, B ISO js14
D,DA ISO m6
F, FA ISO h9
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
2)
62.5
90
62.5
90
62.5
90
62.5
90
62.5
90
90
62.5
90
62.5
90
71
90
71
90
74.5
106
74.5
106
74.5
106
74.5
106
74.5
106
106
74.5
106
74.5
106
85
106
85
106
62.5
81
62.5
81
62.5
81
62.5
81
62.5
81
91
62.5
81
62.5
81
67.5
81
67.5
81
74.5
95
74.5
95
74.5
95
74.5
95
74.5
95
95
74.5
95
74.5
95
79.5
95
79.5
95
12
16
12
16
12
16
12
16
12
16
16
12
16
12
16
14
16
14
16
1)
H
N
ISO 0, -1.0
ISO j6
2)
3)
4)
12
14
12
14
12
14
12
14
12
14
14
12
14
12
14
12
14
12
14
355
355
355
355
355
355
355
355
355
355
355
400
400
400
400
400
400
400
400
36
36
36
36
36
36
36
36
36
36
36
45
45
45
45
45
45
45
45
715
715
715
715
715
715
715
715
715
715
715
805
805
805
805
805
805
805
805
777
777
777
777
777
777
777
777
777
777
777
862
862
862
862
862
862
862
862
28
28
28
28
28
28
28
28
28
28
28
35
35
35
35
35
35
35
35
1317
1387
1377
1447
1377
1447
1457
1527
1457
1527
1667
1628
1698
1628
1698
1798
1838
1798
1838
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
1467
1567
1527
1627
1527
1627
1607
1707
1607
1707
1854
1785
1885
1785
1885
1955
2025
1955
2025
392
462
392
462
392
462
392
462
392
462
462
408
478
408
478
438
478
438
478
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
740
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
680
130
130
130
130
130
130
130
130
130
130
130
150
150
150
150
150
150
150
150
Sizes 280-400
Dimension drawings
Terminal box in standard design with 6 terminals
122/5
142/6
162/7, 162/10
M000080
122/4
142/4
3
Motor sizes 355 to 400
Top-mounted
Terminal box 750 + adapter
Side-mounted
Terminal box 750
M000229
M000206
M000205
A1
B1
H1
A1
B1
H1
122/4 top-mounted
455
280
177
451
347
200
122/5 side-mounted
383
280
180
750 top-mounted
686
413
219
142/4 top-mounted
536
349
197
750 side-mounted
525
413
219
142/6 side-mounted
426
347
201
787
410
226
162/7 side-mounted
508
412
226
106
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
Accessories
M000082
Type
Motor
size
M2
M3
Wmax
ZHKJ 50
ZHKJ 63
ZHKJ 71 1)
ZHKJ 71 1)
280
315
355
400
28
28
33
33
25
25
30
30
20
20
20
20
135
220
275
180
850
1040
1260
1260
1)
X1
X2
max
X3
min
X5
X6
Y1
Y2
Y3
Weight/
rail
kg
150
150
190
190
125
125
145
140
135
150
185
200
200
200
240
240
900
1090
1320
1320
50
50
60
60
100
100
140
140
80
80
120
120
50
50
50
50
14.5
17.5
31
31
Each set includes two complete slide rails including screw for mounting the motor on the rails.
Screws for mounting the rails on the foundation are not included. Slide rails are supplied with
unmachined lower surfaces and should, prior to tightenng down, be supported in a suitable manner.
M000083
Depth
Depth
ZBYH 161...241
ZBHE 301
Foundation
stud type
Fixing screw
Motor
size
Main dimensions
A1
B1
C1
D1
E1
Weight
kg
ZBYH 201
ZBYH 241
ZBHE 301
M20 x 70/70 Y
M24 x 90/90 Y
M30 x 100/100 Y
280
315, 355
400
100
130
300
95
135
385
M20
M24
M30
35
45
65
3.4
7
30
100
130
200
Each set of foundation studs includes 4 studs, fixing screw for the motor, adjusting
screw with foundation plate.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
107
Accessories
Motor size
Poles
280 S_
2
4-12
2
4-12
2
4-12
555
555
555
555
555
555
1160
1090
1160
1160
1220
1220
2
4-12
2
4-12
2
4-12
2
4-12
624
624
624
624
624
624
624
624
1210
1240
1310
1240
1310
1340
1380
1410
2
4-12
2
4-12
2
4-12
4-12
720
720
720
720
720
720
720
1440
1510
1500
1570
1580
1650
1790
2
4-12
2
4-12
810
810
810
810
1796
1836
1936
1976
280 SM_
280 M_
315 S_
315 SM_
315 M_
315 L_
355 S_
355 M_
355 LK_
400 ML_
400 LK_
Mounting arrangement IM V1
with protective roof
355 L_
M000084
1)
1)
108
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
280
315
355
400
Stator
Material
Paint colour shade
Paint thickness
Material
Paint colour shade
Paint thickness
Bearings
D-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6319/C3
6316M/C3
6322/C3
6317M/C3
6322/C3
N-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6316/C3
6316M/C3
6319/C3
6317M/C3
6319/C3
Axially-locked bearings
Bearing seal
Lubrication
SPM-nipples
On request
Rating plate
Terminal box
Frame material
Cover material
Cover screw material
Connections
Cable
entries
2 x M63
2 x M63
2 x 60/80
2 x 60
2-4 pole
6-8 pole
2 x M63
2 x M63
2 x 80
2 x 60/80
Terminals
Fan
Material
Fan cover
Material
Paint colour shade
Paint thickness
Sheet steel
Blue, Munsell 8B 4.5/3.25 (NCS 4822-B05G) / RAL 5014
Two-pack epoxy polyester paint, thickness t 80 Pm
Stator winding
Material
Insulation
Copper
Insulation class F; temperature rise class B unless otherwise stated.
Winding protection
Material
Rotor winding
Balancing method
Key ways
Heating elements
On request
50 W
1 x 65 W
Drain holes
Enclosure
Cooling method
IC 411
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Steel EN 12-2006
2 x 65 W
2 x 65 W
109
110
ABB LV Motors / Cat. BU/ Low Voltage General Purpose Motors / Steel EN 12-2006
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design .............................. 112
Ordering information ........................... 119
Technical data ...................................... 120
Variant codes ....................................... 128
Dimension drawings............................ 131
Rating plates ........................................ 140
Construction ........................................ 141
Cast iron motors in brief ..................... 142
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
111
Mechanical design
Stator
The motor frame including feet, bearing housing and
terminal box is made of cast iron. Integrally cast feet
allow a very rigid mounting and minimal vibration.
Drain holes
Motors, frame sizes 280 to 355, are fitted with drain
holes and closable plugs. The plugs are open on delivery. When mounting the motors, ensure that the drain
holes face downwards.
M000060
4
Terminal boxes are mounted on top of the motor as
standard. The terminal box can also be mounted on the
left or right side, see ordering information.
112
M000063
M000062
M000061
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Poles
Cable entry
mm
71M
2,4,6
2xM161.5
Motor
size
Poles
Cable entry
mm
160M
2,4,6,8
2xM401.5
2,4,6,8
2xM401.5
80M
2,4,6
2xM251.5
160L
90S
2,4,6
2xM251.5
180M
2,4,6,8
2xM401.5
90L
2,4,6
2xM251.5
180L
2,4,6,8
2xM401.5
100L
2,4,6,8
2xM321.5
200L
2,4,6,8
2xM501.5
112M
2,4,6,8
2xM321.5
225S
4,6,8
2xM501.5
132S
2,4,6,8
2xM321.5
225M
2,4,6,8
2xM501.5
132M
2,4,6,8
2xM321.5
250M
2,4,6,8
2xM631.5
Cast iron motor sizes 280 to 355 with top-mounted terminal box
Motor
size
Terminal
box
Flange
opening
Flange
Cable gland
Cable
entry
Cable
diameter
Auxiliary
entries
Terminal
bolt
C
D
E-D
2 x M63
2 x M63
2 x M63
2 x 32-49
3 x 32-49
3 x 32-49
2 x M20
2 x M20
2 x M20
M8
M10
M12
122/2
142/1
162/1
122/2
2 x M63
2 x 32-49
2 x M20
M8
142/1
162/1
D
E-D
2 x M63
2 x M63
3 x 32-49
3 x 32-49
2 x M20
2 x M20
M10
M12
122/2
2 x M63
2 x 32-49
2 x M20
M8
142/1
142/2
D
D
2 x M63
2 x M63
3 x 32-49
3 x 32-49
2 x M20
2 x M20
M10
M10
C
D
D
2 x M63
2 x M63
2 x M63
2 x 32-49
3 x 32-49
3 x 32-49
2 x M20
2 x M20
2 x M20
M8
M10
M10
280 SM_
315 SM_, ML_
355 S
122/2
142/1
142/2
Terminal box
Flange
3GZF294730-749 (280)
3GZF293703-753 (315-355)
Terminal box
Adapter E-D
3GZF294730-944
M000087
Flange
3GZF293703-753
(315-355)
Cable gland
3GZF294730-613
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Cable gland
3GZF294730-613
113
Terminal box
on top
on side
Opening
type
(D/Y-conn.)
Max. rated
current A
mm2
Max connection
cable area
Cable gland
diameter
Auxliary cable
entries
Cable box
diameter
Blank plate
280
315
355
122/2
142/1
142/2
162/1
C
D
D
E-D
363/210
640/370
640/370
950/550
2 x 150
2 x 240
2 x 240
4 x 240
2 x M40-63
1 x M40-63
2 x M40-63
2 x M20
2 x M20
2 x M20
max 2x60
max 2x60
max 2x80
max 4x60
MKLN 20
MKLN 30
M000088
NA
NA
Flange
Opening
C
D
E
E-D
Adapter 3GZF
294730-944
62
100
100
100
193
300
300
300
62
80
80
80
193
292
292
292
M8
M10
M10
M10
Bearings
The motors are normally fitted with single-row deep
groove ball bearings as listed in the table below.
Number
of poles
Motor
size
Number
of poles
71M
2-6
6202 VV C3
6202 VV C3
180M
2-8
6310 ZZ C3
6210 DDU C3
80M
2-6
6204 DDU C3
6204 DDU C3
180L
2-8
6310 ZZ C3
6210 DDU C3
90S
2-6
6205 DDU C3
6205 DDU C3
200L
2-8
6312 ZZ C3
6212 DDU C3
90L
2-6
6205 DDU C3
6205 DDU C3
225S
4-8
6313 ZZ C3
6213 ZZ C3
100L
2-8
6206 DDU C3
6206 DDU C3
225M
2-8
6313 ZZ C3
6213 ZZ C3
112M
2-8
6207 DDU C3
6206 DDU C3
250M
2-8
6314/C3
6214/C3
132S
2-8
6208 DDU C3
6207 DDU C3
280
6316/C4
6316/C4
132M
2-8
6208 DDU C3
6207 DDU C3
4-12
6316/C3
6316/C3
160M
2-8
6309 ZZ C3
6209 DDU C3
6316/C4
6316/C4
160L
2-8
6309 ZZ C3
6209 DDU C3
4-12
6319/C3
6316/C3
6316M/C3
6316M/C3
4-12
6322/C3
6319/C3
315
355
Axially-locked bearings
The D-end bearing is locked, in sizes 71 to 180 with
the spring ring and in sizes 200 to 355 with the inner
bearing cover. The inner ring is locked by tight tolerance to the shaft.
114
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Transport locking
Motors that have roller bearings or an angular contact
ball bearing are fitted with a transport lock before despatch to prevent damage to the bearings during transport. In case of transport locked bearing, motor sizes
280 to 355 are provided with a warning sign.
Bearing seals
The motors are as standard provided with seals according to table below.
Standard design
Alternative design
Axial seal
N-end
Number
of poles
d1
d2
B1
VS 80
VS 80
80x100x101)
80x100x10
2
4-12
80
80
100
100
13.5
13.5
10
10
VS 80
VS 95
VS 80
VS 80
80x100x101)
95x120x12
2
4-12
80
95
100
120
13.5
13.5
10
12
VS 95
VS 110
VS 95
VS 95
95x120x121)
110x140x121)
2
4-12
95
110
120
140
13.5
15.5
12
12
Motor
size
Description
D-end
71 to 132
160 to 225
250
280
VS 80
VS 80
315
355
1)
Viton-seal
M000089
Bearing life
The nominal life L10 of a bearing is defined according
to ISO as the number of operating hours achieved or
exceeded by 90% of identical bearings in a large test
series under certain specified conditions. 50% of the
bearings achieve at least five times this figure.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
115
Lubrication
On delivery, the motors are lubricated with a type of
grease intended for use in dry or humid environments,
at normal ambient temperature.
Motors 250 to 355 have grease value lubrication for lubrication in service. The lubrication intervals and quantity
are stated in the maintenance manual which comes with
the motor.
Pulley diameter
When the desired bearing life has been determined,
the minimum permissible pulley diameter can be calculated with FR (or FRX), according to the formula:
D=
1.9 107 K P
N FR
Where:
D
= diameter of pulley, mm
P
= power requirement, kW
N
= motor speed, r /min
K
= belt tension factor, dependent on belt type and
type of duty. A common value for V belts is K=
2.5
FR = permissible radial force
Motor
Length of
shaft
extension
Radial forces
Ball bearings
20,000 hours
40,000
size
Poles
E (mm)
FX0 (N)
FXmax (N)
FX0 (N)
FXmax (N)
71 M
2
4
6
2
4
6
8
2
4
6
8
30
30
30
40
40
40
40
40
40
40
40
381
480
555
624
788
907
997
686
870
1000
1095
322
405
469
509
643
740
813
542
687
790
866
303
381
441
495
626
720
791
545
690
794
870
256
322
372
404
511
587
646
430
545
627
687
80 M
90 S
116
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Length of
shaft
extension
Radial forces
Ball bearings
20,000 hours
size
Poles
E (mm)
FX0 (N)
90 L
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
4
6
8
2
4
6
8
2
4
6
8
2
4
4
6
8
2
4
6
8
4
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
2
4
6
8
50
50
50
50
60
60
60
60
60
60
60
60
80
80
80
80
80
80
80
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110
140
140
110
110
110
110
140
140
140
140
140
140
140
140
140
170
170
170
140
140
140
140
140
210
210
210
696
885
1015
1112
979
1234
1419
1566
1258
1592
1831
2020
1435
1821
2079
2299
1840
2107
2329
1544
1948
2232
2465
1563
1971
2259
2495
2984
3759
3802
4352
4800
4090
5162
5909
6518
5763
7261
4591
5791
6644
7296
5112
6440
7388
8113
7300
9200
10600
11600
7300
11300
13000
14300
7300
11300
13000
14300
9000
15200
17300
19000
100 L
112 M
132 S
132 M
160 M
160L
180M
180L
200L
225S
225M
250M
280SM_
315SM_
315ML
355 S_
40,000
FXmax (N)
564
717
823
901
785
989
1137
1255
1014
1284
1477
1629
1122
1423
1625
1797
1476
1690
1869
1200
1513
1734
1916
1243
1568
1797
1984
2371
2988
3073
3518
3881
3377
4262
4879
5382
4526
5703
3811
4594
5271
5788
4170
5254
6027
6619
6200
7800
8900
9800
6000
9400
10600
10400
6000
9400
10600
10400
7900
12500
14200
15600
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
FX0 (N)
553
702
806
883
777
979
1126
1243
998
1264
1453
1603
1139
1445
1650
1825
1461
1672
1849
1226
1546
1772
1957
1240
1565
1793
1980
2368
2984
3017
3454
3810
3246
4097
4690
5173
4574
5763
3644
4596
5273
5791
4057
5111
5864
6439
5800
7300
8400
9200
5800
9000
10300
11300
5800
9000
10300
11300
6200
12000
13700
15200
FXmax (N)
448
569
653
715
622
785
903
996
805
1019
1172
1293
890
1130
1290
1427
1172
1341
1483
952
1201
1377
1520
987
1244
1426
1575
1882
2371
2439
2792
3080
2680
3383
3872
4272
4593
4526
3025
3646
4184
4594
3310
4170
4784
5253
4900
6200
7100
7800
4950
7500
8500
9400
4950
7500
8500
9400
5300
9850
11300
12400
117
Motor
size
20,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
FAZ
N
N
6-pole
FAD
FAZ
N
N
71
80
90
270
430
470
270
430
470
360
590
650
360
590
650
440
710
780
440
710
780
800
870
100
112
132 S_
132 M_
650
840
950
-
650
840
950
-
880
880
1160 1160
1300 1300
1300 1300
1060
1380
1540
1540
1060
1380
1540
1540
1020
1970
2570
2870
3220
1020
1970
2570
2870
3220
1380
2660
2660
3490
3900
3900
4380
1650
3200
4200
4720
5290
1650
3200
4200
4720
5290
280
315
355
7300 5300
7000 5000
10500 3500
1380
2660
2660
3490
3900
3900
4380
8000 6000
9000 7000
13500 6500
9000 7000
10600 8600
15300 8300
FAZ
FAD
Mounting arrangement IM V1
40,000 hours
2-pole
FAD
FAZ
N
N
FAD
N
800
870
200
320
350
200
320
350
270
440
470
270
440
470
1200
1570
1760
1760
1200
1570
1760
1760
480
620
690
-
480
620
690
-
650
850
960
950
650
850
960
950
1880
3620
4750
5310
5310
5960
1880
3620
4750
5310
5310
5960
740
1440
1890
2120
2380
740
1440
1890
2120
2380
1020
1970
1970
2580
2880
2880
3220
1020
1970
1970
2580
2880
2880
3220
8-pole
FAD
FAZ
N
N
10000 8000
11600 9600
16800 9800
5750 3750
5600 3600
8750 1750
4-pole
FAZ
N
6200 4200
6900 4900
10800 3800
FAD
N
6-pole
FAZ
N
320
530
580
320
530
580
FAD
N
8-pole
FAZ
N
600
650
600
650
780 780
1020 1020
1140 1140
1140 1140
890 890
1170 1170
1310 1310
1310 1310
1210
2350
3080
3460
3880
1390
2670
3500
3900
3900
4380
1210
2350
3080
3460
3880
1390
2670
3500
3900
3900
4380
6900 4900
7900 5900
12000 5000
7700 5700
8900 6900
13300 6300
6-pole
FAD
FAZ
N
N
8-pole
FAD
FAZ
N
N
M000023
160
180M
180L
200
225S
225M
250
FAZ
M000022
Motor
size
20,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
FAZ
N
N
6-pole
FAD
FAZ
N
N
8-pole
FAD
FAZ
N
N
71
80
90
280
450
500
260
410
440
380
620
590
450
740
820
420
560
730
830
920
770
830
210
340
380
190
300
320
280
460
510
250
410
440
340
550
620
310
500
530
100
112
132 S_
132 M_
710
920
1050
-
590
770
830
-
950
800
1260 1050
1450 1160
1480 1120
1140 980
1490 1270
1690 1400
1730 1320
1280
1680
1930
1950
1110
1470
1600
1580
530
690
800
-
420
540
570
-
720
950
1100
1130
560
740
810
770
860
1130
1280
1320
700
910
990
910
160 M_
160 L_
180 M_
180 L_
200
225 S_
225 M_
250
1240
1320
2320
3050
3570
4090
750
710
1630
2050
2180
2360
1670
1730
3100
3170
4100
4680
4770
5570
1100
1030
2230
2150
2880
3130
3040
3180
1960
2050
3750
4830
5650
6520
1340
1250
2650
3510
3790
4070
2140
2260
4160
5450
6120
6250
7210
1560
1500
3100
4060
4500
4370
4700
970
1050
1780
2370
2810
3240
480
440
1100
1370
1420
1520
1300
1370
2400
2480
3180
3650
3740
4420
730
670
1540
1460
1970
2100
2020
2030
1530
1610
2900
3700
4390
5100
900
820
1800
2390
2530
2650
1650
1770
3200
4200
4720
4850
5630
1070
1010
2140
2800
3090
2960
3120
8500 4300
9000 3700
9600 3400
1)
10000
9500
11600
12400
18500
4600
5400
5000
3800
11000
13500
14800
21200
5500
6200
5600
5000
12200
14500
16200
23000
6600
7500
7000
6800
6950 2700
7450 2100
8100 1850
1)
12200
7700
9450
10100
15700
2800
3200
2850
1000
8900
10900
12200
18000
3350
3650
3150
1750
9750
11900
13200
19400
4200
4650
4150
3100
280
315 SM_
315 ML_
355 S_
1)
350
560
600
40,000 hours
2-pole
4-pole
FAD
FAZ
FAD
FAZ
N
N
N
N
620
690
560
600
970 800
1270 1060
1470 1140
1490 1120
On request
118
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
M2QA 90S4A
Pole number
4
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
1.1 kW
Product code
3GQA092101-ADA
Variant codes if needed
D, E, F
5-6 7
8-10 11 12 13 14
A Motor type
B Motor size
C Product code
D Mounting arrangement code
E Voltage and frequency code
F Generation code
G Variant codes
112
132
160
180
20
22
25
28
=
=
=
=
200
225
250
280
Position 12
Mounting arrangement
A = Foot-mounted, top-mounted terminal box
R = Foot-mounted, terminal box on RHS,
seen from D-end
L = Foot-mounted, terminal box on LHS,
seen from D-end
B = Flange-mounted, large flange
C = Flange-mounted, small flange sizes (71-112)
H = Foot- and flange-mounted
31 = 315
35 = 355
Position 13
Voltage and frequency code
See tables on appropriate page
6
7
8
9
=
=
=
=
12 poles
>12 poles
Two-speed motors
Multi-speed motors
Position 14
Generation code
A, B, C
The product code must be, if needed, followed by
variant codes.
Positions 8 to 10
Serial number
Position 11
- (dash)
size
50Hz
60 Hz
50 Hz
60 Hz
50 Hz
50 Hz
60 Hz
50 Hz
50 Hz
50 Hz
71-250
220-240 V
380-420 VY
220, 230 V
380,400,415VY
440-480 VY
440VY
380-420 V
660-690 VY
380, 400, 415 V
660, 690 VY
440-480V1)
440V
-
415 V
415 V
-
500 V
500 V
-
575 V
-
500 VY
500 VY
-
660 V
660 V
-
690 V
690 V
-
280-400
X
Other rated
voltage,
connection or
frequency,
690 V maximum
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
119
Motor type
Full
3/4
Speed load
load
r/min
100% 75%
Product code
0.37
0.55
0.75
1.1
1.5
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M2A
71 M2B
80 M2A
80 M2B
90 S2A
90 S2A
90 L2A
100 L2A
112 M2A
132 S2A
132 S2B
160 M2A
160 M2B
160 L2A
180 M2A
200 L2A
200 L2B
225 M2A
250 M2A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L2 A
132 M2A
132 M2B
160 L2B
180 L2A
200 L2C
225 M2B
250 M2B
280 SMC
Current
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1.27
1.89
2.52
3.68
5.03
5.03
7.37
10.02
13.17
17.99
24.53
35.85
49.06
60
71
96
119
144
177
241
289
353
423
513
641
800
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.5
2.5
2.5
2.3
2.2
2.3
2.5
2.4
1.7
1.7
1.5
1.7
1.7
2.6
1.5
3.0
2.7
3.0
2.2
2.5
2.5
3.5
3.0
3.2
3.0
3.5
3.1
2.6
2.7
2.5
2.6
2.6
2.7
2.7
2.6
2.5
2.5
2.5
2.4
3.1
2.8
2.0
2.0
2.2
2.3
2.3
2.2
2.5
2.4
1.9
2.1
2.2
2.2
2.8
2.8
2.6
2.8
2.8
2.6
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
071 301-A
071 302-A
081 301-A
081 302-A
091 101-A
091 101-A
091 501-A
101 501-A
111 301-A
131 101-A
131 102-A
161 301-A
161 302-A
161 501-A
181 301-A
201 501-A
201 502-A
221 301-A
251 301-A
281 210-D
281 220-D
311 210-D
311 220-D
311 230-D
311 410-D
351 100-D
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
111 501-A
131 301-B
131 302-B
161 502-A
181 501-A
201 503-A
221 302-A
251 302-A
281 230-D
Power
2780
2785
2840
2855
2850
2850
2850
2860
2900
2920
2920
2930
2920
2930
2940
2955
2955
2970
2960
2974
2970
2979
2977
2976
2980
2983
70.0
73.0
75.0
78.0
79.0
79.0
81.5
83.0
85.0
87.5
88.5
90.0
90.0
90.5
90.8
91.4
92.2
92.6
93.4
94.1
94.5
94.1
94.7
95.1
95.7
95.7
Basic design
68.0
72.4
75.5
77.9
79.0
79.0
81.8
83.2
84.6
87.9
90.1
90.5
90.1
90.9
91.0
91.1
91.8
92.2
91.7
93.6
94.2
93.4
94.1
94.8
95.3
95.3
0.81
0.82
0.85
0.85
0.87
0.87
0.86
0.88
0.90
0.89
0.90
0.89
0.89
0.90
0.90
0.90
0.90
0.89
0.89
0.87
0.89
0.85
0.87
0.88
0.88
0.89
3)
0.90
0.88
0.90
0.90
0.90
0.90
0.89
0.89
0.90
400 V 50 Hz
1)
2)
3)
2900
2910
2900
2930
2950
2955
2975
2970
2973
82.0
85.5
88.0
88.0
90.8
92.0
92.6
91.0
95.0
Torque
0.94
1.33
1.7
2.4
3.15
3.15
4.53
5.93
7.55
10.2
13.6
19.82
27.03
32.78
38.86
52
64
78
96
134
156
198
232
273
345
424
6.1
6.1
6.1
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
6.5
6.5
6.5
6.5
6.5
6.5
7.0
7.5
6.7
6.4
6.3
6.3
6.2
7.9
6.8
High-output design
3)
3)
3)
3)
3)
3)
3)
94.8
10.76
17.65
20.05
40.09
53
78
96
134
187
7.0
7.5
8.0
6.5
6.5
7.0
7.0
7.0
6.7
18.1
30.2
36.2
71
97
145
177
241
353
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Output
kW
Motor type
Speed
r/min
Efficiency
%
380 V 50 Hz
0.37
0.55
0.75
1.1
1.5
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2765
2780
2825
2840
2835
2835
2835
2845
2885
2905
2905
2918
2917
2920
2940
2950
2950
2965
2956
2970
2966
2976
2974
2972
2978
2981
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M2A
71 M2B
80 M2A
80 M2B
90 S2A
90 S2A
90 L2A
100 L2A
112 M2A
132 S2A
132 S2B
160 M2A
160 M2B
160 L2A
180 M2A
200 L2A
200 L2B
225 M2A
250 M2A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L2 A
132 M2A
132 M2B
160 L2B
180 L2A
200 L2C
225 M2B
250 M2B
280 SMC
70.0
73.0
75.5
77.5
79.0
79.0
81.5
83.0
85.0
87.5
87.5
90.0
90.0
90.5
90.8
91.2
91.7
92.2
93.2
94.0
94.2
94.1
94.5
95.0
95.6
95.7
Power
factor
cos
Current
Speed
IN
r/min
A
0.83
0.84
0.86
0.86
0.90
0.90
0.89
0.90
0.92
0.90
0.90
0.91
0.91
0.91
0.91
0.91
0.91
0.90
0.90
0.88
0.89
0.86
0.87
0.88
0.89
0.90
0.97
1.37
1.75
2.52
3.23
3.23
4.61
6.14
7.82
10.7
14.5
20.41
27.82
34.13
40.45
54
67
82
100
137
163
208
243
290
358
440
Efficiency
%
Power
factor
cos
Current
IN
A
0.79
0.79
0.85
0.83
0.86
0.86
0.83
0.86
0.87
0.88
0.90
0.87
0.88
0.89
0.88
0.89
0.89
0.87
0.88
0.86
0.88
0.83
0.85
0.88
0.87
0.88
0.93
1.33
1.64
2.37
3.08
3.08
4.56
5.85
7.53
9.94
13.1
19.54
26.35
31.95
38.3
51
62
77
93
130
151
197
230
265
335
412
415 V 50 Hz
380 V 50 Hz
2795
2800
2855
2870
2865
2865
2865
2875
2915
2935
2935
2930
2932
2935
2955
2960
2960
2975
2962
2976
2974
2980
2979
2978
2982
2984
70.0
73.0
75.0
78.0
79.0
79.0
81.0
83.5
85.0
88.0
89.0
90.0
90.0
90.5
90.8
91.3
92.3
92.6
93.5
94.2
94.6
94.1
94.7
95.2
95.7
95.7
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
415 V 50 Hz
0.0003
0.00037
0.00091
0.00107
0.00135
0.00135
0.00163
0.00402
0.00671
0.01241
0.01491
0.0436
0.0551
0.06549
0.08805
0.14821
0.16822
0.29345
0.3784
0.7
0.82
1.05
1.25
1.5
1.95
2.7
10
11
16
17
21
21
24
33
42
58
63
112
122
142
170
235
254
328
390
570
610
820
870
960
1130
1500
56
56
57
58
61
61
61
65
67
70
70
72
72
72
72
81
81
81
84
78
78
83
83
83
83
83
High-output design
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
2968
94.8
0.90
198
2975
95.1
0.89
180
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Moment
of inertia
J=1/4 GD2
kgm2
0.00826
0.01500
0.01768
0.06549
0.10339
0.18473
0.33431
0.45829
1.05
49
68
73
130
185
276
340
411
660
70
71
73
75
75
81
81
85
78
121
Output
kW
Motor type
Product code
Speed
r/min
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2)
2)
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M4A
71 M4B
80 M4A
80 M4B
90 S4A
90 L4A
100 L4A
100 L4B
112 M4A
132 S4A
132 M4A
160 M4A
160 L4A
180 M4A
180 L4A
200 L4A
225 S4A
225 M4A
250 M4A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 L4A
132 M4B
132 M4C
160 L4B
180 L4B
200 L4B
225 M4B
250 M4B
280 SMC
Power
Current
Full
load
100%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1.71
2.53
3.73
5.06
7.5
10.31
14.69
20.18
26.71
36.73
49.74
71
98
120
142
194
238
290
354
483
580
707
849
1028
1286
1604
2.1
2.1
2.4
2.4
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.4
2.3
2.3
2.4
2.2
2.2
2.2
2.4
2.1
2.1
1.7
1.9
2.1
2.1
2.0
2.7
2.7
2.7
2.6
2.4
2.6
2.7
2.8
2.8
2.9
2.7
2.8
2.4
3.0
3.0
2.9
2.7
2.7
2.7
2.6
2.4
2.3
2.4
2.6
2.5
2.6
2.2
2.2
2.2
2.2
2.2
2.2
2.3
2.3
2.7
2.2
2.2
2.2
2.4
2.6
2.6
2.4
2.4
2.8
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
072 301-A
072 302-A
082 301-A
082 302-A
092 101-A
092 501-A
102 501-A
102 502-A
112 301-A
132 101-A
132 301-A
162 301-A
162 501-A
182 301-A
182 501-A
202 501-A
222 101-A
222 301-A
252 301-A
282 210-D
282 220-D
312 210-D
312 220-D
312 230-D
312 410-D
352 100-D
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
112 501-A
132 302-A
132 303-A
162 502-A
182 502-A
202 502-A
222 302-A
252 302-A
282 230-D
Efficiency
1395
1395
1410
1415
1400
1390
1430
1420
1430
1430
1440
1460
1460
1470
1470
1470
1480
1480
1480
1483
1481
1486
1485
1486
1485
1488
65.5
68.5
73.5
74.5
77.5
78.5
81.5
82.8
85.0
86.0
88.5
89.5
90.0
91.0
91.5
92.2
92.6
92.8
93.4
94.2
94.6
94.6
94.9
95.4
95.7
95.6
Basic design
63.3
69.4
71.4
75.2
77.8
79.2
82.3
82.5
84.6
87.1
88.3
90.0
90.4
90.9
90.0
91.8
91.2
91.7
91.3
94.2
94.7
94.2
94.7
95.2
95.6
95.3
0.72
0.75
0.72
0.75
0.78
0.79
0.81
0.83
0.82
0.85
0.85
0.85
0.86
0.86
0.88
0.88
0.85
0.87
0.87
0.83
0.86
0.84
0.85
0.85
0.86
0.85
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
95.1
0.83
0.85
0.85
0.86
0.88
0.88
0.87
0.87
0.85
400 V 50 Hz
1)
2)
3)
1430
1430
1430
1460
1470
1470
1480
1480
1484
84.0
84.0
84.5
87.0
89.0
89.2
91.0
90.4
95.1
Torque
0.77
1.04
1.5
1.93
2.65
3.5
4.85
6.3
8.29
10.9
14.4
20.87
27.97
34.12
39.44
53
67
80
98
138
162
203
239
286
354
448
5.2
5.2
5.2
6.0
6.0
6.0
6.0
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
7.0
7.0
7.0
6.3
6.4
6.4
6.1
6.7
6.4
6.7
High-output design
11.39
18.6
22.11
35.69
55
68
100
137
196
7.0
6.5
6.5
6.5
6.5
6.5
7.0
7.0
7.1
36.7
61
73
121
195
240
355
484
708
122
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Motor type
Output
kW
Speed
r/min
Efficiency
%
380 V 50 Hz
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
1385
1385
1400
1405
1390
1380
1420
1410
1420
1420
1430
1455
1452
1465
1465
1465
1475
1475
1477
1480
1478
1484
1483
1483
1482
1487
2)
2)
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M4A
71 M4B
80 M4A
80 M4B
90 S4A
90 L4A
100 L4A
100 L4B
112 M4A
132 S4A
132 M4A
160 M4A
160 L4A
180 M4A
180 L4A
200 L4A
225 S4A
225 M4A
250 M4A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
1)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
66.0
69.0
73.5
74.5
77.0
78.5
81.5
82.5
84.5
85.5
88.0
89.5
90.0
91.0
91.5
92.3
92.3
92.6
93.2
94.0
94.2
94.5
94.8
95.0
95.2
95.6
Power
factor
cos
Current
Speed
IN
r/min
A
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.74
0.78
0.75
0.78
0.80
0.80
0.82
0.85
0.84
0.87
0.85
0.87
0.88
0.88
0.90
0.89
0.85
0.88
0.88
0.85
0.86
0.85
0.86
0.86
0.86
0.86
0.78
1.05
1.52
1.97
2.72
3.64
4.98
6.5
8.57
11.3
15.2
21.46
28.78
35.1
40.59
55
71
83
102
143
169
209
248
300
375
465
1405
1405
1420
1425
1410
1400
1440
1430
1440
1440
1450
1463
1461
1470
1475
1470
1480
1480
1482
1484
1483
1487
1486
1487
1486
1489
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
64.0
68.0
72.5
74.0
77.5
78.5
81.4
82.7
85.0
86.5
88.0
89.5
90.0
91.0
91.5
92.2
92.0
92.8
93.6
94.2
94.7
94.6
95.0
95.4
95.7
95.6
0.79
1.07
1.55
1.96
2.65
3.48
4.85
6.17
8.24
10.7
14.1
20.6
27.28
34.49
38.9
55
68
79
95
137
157
198
232
279
343
438
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
94.8
0.86
204
1485
95.2
0.84
191
415 V 50 Hz
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.69
0.71
0.68
0.72
0.75
0.77
0.78
0.82
0.80
0.83
0.84
0.83
0.85
0.82
0.86
0.88
0.82
0.85
0.86
0.82
0.85
0.82
0.84
0.84
0.85
0.84
380 V 50 Hz
112 L4A 3)
132 M4B 3)
132 M4C 3)
160 L4B 3)
180 L4B 3)
200 L4B 3)
225 M4B 3)
250 M4B 3)
280 SMC 1481
Efficiency
%
0.00053
0.00066
0.00145
0.00174
0.00254
0.00317
0.00679
0.00862
0.01306
0.02673
0.03432
0.06543
0.09349
0.16049
0.18046
0.2819
0.37
0.42
0.78
1.05
1.32
1.9
2.2
2.6
3.2
5.4
11
11
16
17
21
25
32
36
45
60
73
116
137
170
186
254
308
335
450
560
600
800
855
930
1030
1500
43
45
46
46
52
52
53
53
56
59
59
66
66
66
66
71
73
73
76
71
71
78
78
78
78
82
High-output design
0.01484
0.0347
0.04227
0.10686
0.20783
0.29715
0.6244
0.9125
1.7
49
75
80
147
200
277
351
485
660
64
71
73
66
70
72
75
77
71
123
Output
kW
Motor type
Product code
Speed
r/min
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M6A
71 M6B
80 M6A
80 M6B
90 S6A
90 L6A
100 L6A
112 M6A
132 S6A
132 M6A
132 M6B
160 M6A
160 L6A
180 L6A
200 L6A
200 L6B
225 M6A
250 M6A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M6B
132 M6C
160 L6B
180 L6B
200 L6C
225 M6B
250 M6B
280 SMC
Power
Current
Full
load
100%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
1.8
1.8
1.9
1.9
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.2
2.3
2.2
2.1
2.2
2.3
2.4
2.4
1.9
1.9
2.1
2.2
1.8
2.4
2.5
2.0
1.8
2.3
2.6
2.4
2.3
2.4
2.9
3.0
2.3
2.4
2.9
2.5
3.2
2.9
2.6
2.4
2.4
2.3
2.3
2.6
2.5
2.3
3/4
load
75%
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
073 301-A
073 302-A
083 301-A
083 302-A
093 101-A
093 501-A
103 501-A
113 301-A
133 101-A
133 301-A
133 302-A
163 301-A
163 501-A
183 501-A
203 501-A
203 502-A
223 301-A
253 301-A
283 210-D
283 220-D
313 210-D
313 220-D
313 230-D
313 410-D
353 100-D
910
890
930
925
920
920
940
940
960
960
960
970
970
980
980
980
980
980
990
989
992
991
991
991
992
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
113 302-A
133 303-A
163 502-A
183 502-A
203 503-A
223 302-A
253 302-A
283 230-D
950
970
970
980
980
980
980
989
Efficiency
55.0
60.0
63.0
65.0
71.0
73.0
76.0
80.0
82.5
84.0
86.0
88.0
88.5
89.0
90.3
90.4
90.8
92.2
93.5
93.8
94.2
94.8
95.1
95.3
95.3
50.1
58.3
63.2
65.1
70.2
73.1
75.3
81.2
83.5
84.2
85.6
88.3
88.6
89.1
90.2
90.3
89.2
92.4
93.3
93.7
94.0
94.7
95.0
95.2
95.2
Basic design
0.65
0.65
0.66
0.68
0.72
0.74
0.77
0.76
0.78
0.77
0.79
0.78
0.78
0.82
0.82
0.83
0.78
0.88
0.82
0.83
0.80
0.83
0.82
0.83
0.83
0.73
0.93
1.29
1.8
2.12
2.94
3.78
5.23
6.73
8.93
11.7
15.77
23
29.67
36.06
42.32
61
66
85
103
145
166
206
242
293
0.76
0.78
0.78
0.82
0.78
0.78
0.88
0.83
740
14.49
30.3
37.87
63
78
82
139
400 V 50 Hz
1)
2)
3)
77.0
83.0
85.5
86.0
87.4
87.8
89.2
94.5
3)
3)
3)
3)
3)
3)
3)
94.5
Torque
4.0
4.0
5.0
5.0
5.0
5.0
5.5
5.5
6.5
6.5
6.5
6.0
6.0
6.0
6.0
6.0
6.6
6.8
6.7
6.4
6.3
6.5
6.7
6.5
6.2
1.89
2.68
3.8
5.68
7.79
11.42
15.24
22.35
29.84
39.79
54
73
108
146
180
214
292
360
434
531
722
867
1060
1272
1540
High-output design
6.5
6.5
6.0
6.0
6.0
6.6
6.8
6.9
30.2
64
138
180
292
361
439
724
1.9
1.9
2.1
2.2
2.0
2.1
2.2
2.6
2.1
2.1
2.2
2.7
2.6
2.6
2.6
2.5
124
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Output
kW
Motor type
Speed
r/min
2)
2)
2)
2)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
71 M6A
71 M6B
80 M6A
80 M6B
90 S6A
90 L6A
100 L6A
112 M6A
132 S6A
132 M6A
132 M6B
160 M6A
160 L6A
180 L6A
200 L6A
200 L6B
225 M6A
250 M6A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
Power
factor
cos
Current
Speed
IN
r/min
A
380 V 50 Hz
905
885
925
920
915
915
935
935
955
955
945
968
966
980
975
975
980
978
988
987
990
990
990
989
991
Efficiency
%
112 M6B 3)
132 M6C 3)
160 L6B 3)
180 L6B 3)
200 L6C 3)
225 M6B 3)
250 M6B 3)
280 SMC 987
55.5
60.0
63.5
65.0
71.0
73.0
76.0
79.0
82.0
84.0
85.5
88.0
88.5
89.0
90.6
90.9
90.5
92.0
93.9
93.5
94.1
95.7
94.9
95.1
95.2
0.69
0.65
0.70
0.71
0.75
0.77
0.79
0.77
0.81
0.77
0.80
0.79
0.80
0.84
0.84
0.84
0.78
0.90
0.83
0.84
0.82
0.84
0.83
0.83
0.83
Efficiency
%
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.72
0.98
1.29
1.82
2.13
2.98
3.8
5.5
6.87
9.39
12.3
16.39
23.61
30.48
36.94
43.79
64
68
89
108
148
174
215
255
307
915
895
935
930
925
925
945
945
965
965
955
975
975
985
980
980
980
982
990
990
992
992
991
991
993
380 V 50 Hz
52.5
59.0
62.0
65.5
70.5
73.0
75.5
80.0
82.5
84.0
86.0
88.0
88.5
89.0
90.1
90.1
90.9
92.3
93.5
93.8
94.2
94.8
95.0
95.3
95.3
0.62
0.62
0.62
0.66
0.69
0.70
0.75
0.75
0.76
0.75
0.78
0.75
0.75
0.79
0.79
0.81
0.76
0.86
0.80
0.82
0.77
0.81
0.80
0.82
0.82
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.77
0.95
1.33
1.79
2.15
2.98
3.73
5.14
6.66
8.84
11.4
15.81
23.06
29.68
36.16
41.93
60
64
84
101
143
163
203
237
287
415 V 50 Hz
0.00056
0.00074
0.00159
0.00196
0.00292
0.00379
0.00999
0.03116
0.03116
0.04074
0.05332
0.09231
0.1297
0.2418
0.34174
0.46837
0.62691
0.97
1.6
1.9
2.8
3.6
4.4
5.3
7.3
10
11
17
18
21
25
32
40
55
65
75
119
140
180
231
254
308
382
540
580
780
870
930
1040
1500
42
42
45
45
48
48
51
54
56
56
56
61
62
63
64
64
66
68
71
71
75
75
75
75
77
High-output design
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
94.3
0.84
144
990
94.6
0.82
135
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Moment
of inertia
J=1/4 GD2
kgm2
0.0199
0.0611
0.139
0.28398
0.495
0.80327
1.32
2.6
45
75
155
196
291
351
455
660
56
59
64
65
66
68
71
71
125
Output
kW
Motor type
Product code
Speed
r/min
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
80 M8A
80 M8B
90 S8A
90 L8A
100 L8A
100 L8B
112 M8A
132 S8A
132 M8A
160 M8A
160 M8B
160 L8A
180 L8A
200 L8A
225 S8A
225 M8A
250 M8A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M8B
132 M8B
160 L8B
180 L8B
200 L8B
225 M8B
250 M8B
280 SMC
Power
Current
Full
load
100%
3/4
load
75%
factor
cos
100%
IN
Is
TN
Ts
Tmax
IN
Nm
TN
TN
50.1
53.3
62.1
63.3
70.1
70.3
75.4
81.8
81.4
84.0
85.6
85.8
87.0
89.4
89.1
88.2
90.1
93.3
93.8
94.0
94.4
94.7
95.0
94.9
0.60
0.60
0.60
0.60
0.64
0.65
0.68
0.70
0.75
0.73
0.74
0.74
0.77
0.76
0.75
0.75
0.79
0.78
0.78
0.81
0.82
0.82
0.83
0.81
0.85
1.11
1.42
2.07
2.42
3.45
4.27
5.6
7.13
9.42
12.55
16.91
23.51
32.009
39.56
46.78
60
74
90
104
141
167
203
247
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
2.1
2.1
2.1
2.0
2.3
2.1
2.2
2.3
1.8
1.9
1.6
1.7
1.8
1.8
1.3
1.9
1.9
1.9
2.0
2.2
2.4
2.4
2.5
2.2
2.6
2.8
2.5
2.8
2.8
2.7
2.7
2.4
3.0
3.2
2.7
2.7
2.7
2.7
2.3
2)
0.68
0.75
0.74
0.77
0.76
0.75
0.79
0.79
5.94
9.38
19.86
33.2
40.85
66
76
108
400 V 50 Hz
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
3GBA
084 301-A
084 302-A
094 101-A
094 501-A
104 501-A
104 502-A
114 301-A
134 101-A
134 301-A
164 301-A
164 302-A
164 501-A
184 501-A
204 501-A
224 101-A
224 301-A
254 301-A
284 210-D
284 220-D
314 210-D
314 220-D
314 230-D
314 410-D
354 100-D
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GQA
3GBA
114 302-A
134 302-A
164 502-A
184 502-A
204 502-A
224 302-A
254 302-A
284 230-D
Efficiency
700
700
700
700
700
700
700
710
710
720
720
720
730
730
740
740
740
741
741
742
741
741
740
743
51.0
54.5
62.5
63.5
70.0
71.5
75.0
81.0
81.0
84.0
85.5
86.5
87.7
89.0
90.0
90.5
91.3
93.5
94.0
94.1
94.5
94.8
95.0
95.0
Basic design
400 V 50 Hz
1)
2)
700
710
720
730
730
740
740
741
72.0
78.0
83.5
84.7
86.0
87.5
88.3
94.4
Torque
3.3
3.6
4.4
4.7
5.0
5.0
5.0
5.5
5.5
5.5
5.5
5.5
5.4
5.5
5.5
6.0
6.5
7.3
7.6
7.1
7.1
7.4
7.3
6.5
2.46
3.41
5.05
7.5
10.23
15.01
20.46
29.59
40.35
53
72
99
143
196
238
283
387
477
580
708
968
1161
1420
1697
High-output design
2)
2)
2)
2)
2)
2)
94.3
5.2
5.5
5.5
5.4
5.4
6.3
6.5
7.8
27.3
51
113
196
242
387
478
709
1.7
1.7
2.0
1.9
1.9
2.1
2.2
1.9
1.9
1.9
2.4
2.6
2.6
2.6
2.5
3.2
126
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Motor type
Output
kW
EffiSpeed ciency
r/min %
380 V 50 Hz
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
695
695
695
695
695
695
695
705
705
715
715
715
725
725
740
740
738
740
740
741
740
740
739
742
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
M2BAT
80 M8A
80 M8B
90 S8A
90 L8A
100 L8A
100 L8B
112 M8A
132 S8A
132 M8A
160 M8A
160 M8B
160 L8A
180 L8A
200 L8A
225 S8A
225 M8A
250 M8A
280 SMA
280 SMB
315 SMA
315 SMB
315 SMC
315 MLA
355 S
1)
1)
1)
1)
1)
1)
1)
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2QA
M2BAT
112 M8B
132 M8B
160 L8B
180 L8B
200 L8B
225 M8B
250 M8B
280 SMC
51.0
54.0
62.0
63.0
70.0
71.5
75.0
80.5
81.0
84.0
85.5
86.5
87.7
88.9
89.9
90.4
91.1
93.2
93.8
93.9
94.3
94.6
94.9
94.9
Power
factor
cos
Current
Speed
IN
r/min
A
Efficiency
%
Power
factor
cos
Current
IN
A
415 V 50 Hz
0.61
0.61
0.61
0.61
0.67
0.68
0.68
0.75
0.78
0.76
0.76
0.77
0.79
0.78
0.75
0.76
0.80
0.80
0.80
0.83
0.83
0.84
0.84
0.82
0.88
1.16
1.49
2.18
2.43
3.45
4.47
5.6
7.22
9.52
12.86
17.11
24.12
32.86
41.69
48.65
63
75
92
108
147
173
210
258
380 V 50 Hz
705
705
705
705
705
705
705
715
715
720
720
722
730
730
745
745
741
742
742
743
742
742
741
743
51.5
54.5
62.5
63.5
69.0
70.5
75.0
80.5
81.0
84.0
85.5
86.5
87.7
88.8
90.3
90.3
91.4
93.4
94.0
94.1
94.5
94.8
95.0
95.0
Weight
kg
Sound
pressure
level LP
dB(A)
Basic design
0.60
0.60
0.60
0.60
0.64
0.62
0.67
0.69
0.72
0.70
0.70
0.70
0.74
0.74
0.71
0.71
0.78
0.76
0.75
0.79
0.81
0.81
0.81
0.80
0.82
1.08
1.38
2.01
2.39
3.47
4.16
5.55
7.11
9.46
12.78
17.23
23.58
31.75
40.14
47.74
58
73
90
103
137
164
198
244
415 V 50 Hz
0.00111
0.00326
0.00541
0.00756
0.00971
0.01186
0.01559
0.03625
0.04141
0.0676
0.09524
0.12122
0.23645
0.37103
0.53287
0.65825
0.975
1.85
2.2
3.2
4.1
4.9
5.8
7.3
16
17
21
24
31
34
42
56
64
105
125
142
176
235
290
302
392
570
610
820
910
980
1100
1500
42
42
46
46
53
53
55
55
56
58
58
58
61
63
65
65
67
65
65
65
65
65
72
75
High-output design
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
740
94.2
0.81
110
742
94.4
0.77
106
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Moment
of inertia
J=1/4 GD2
kgm2
0.0199
0.04776
0.1312
0.28398
0.46854
0.80327
1.28
2.85
45
75
136
196
274
349
436
690
58
59
61
63
65
67
69
65
127
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
Balancing
052
417
NA
424
NA
NA
NA
NA
037
NA
NA
NA
039
Cold resistant grease (-55... +100C). For frame sizes 160-225, only posM
sible when using regreasable bearings.
Heat resistant grease (-25... 150C). For frame sizes 160-225, only possible
M
when using regreasable bearings.
040
041
NA
NA
043
NA
NA
M/S
178
209
NA
425
785
Reinforced tropicalisation.
Cooling system
068
Metal fan.
183
NA
Dimension drawing
141
Drain holes
065
NA
NA
076
NA
Earthing bolt
067
Heating elements
450
451
Insulation systems
014
NA
405
NA
*)
128
=
=
Included as standard
On modification of a stocked motor, or on new
manufacture,the number per order may be limited.
P
R
NA
=
=
=
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Code
Variant
1)
Motor size
719080
100
112132
160180
200250
280355
Mounting arrangements
008
NA
NA
009
047
IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5).
NA
NA
066
NA
NA
078
NA
NA
NA
090
IM 2101 foot/flange mounted, DIN C-flange, from IM 1001, (B34 from B3).
NA
NA
NA
Painting
114
Protection
005
072
073
158
211
Weather protected, IP xx W.
NA
401
NA
NA
NA
403
095
135
138
NA
139
161
NA
122
123
125
321
322
323
325
127
*)
=
=
Included as standard
On modification of a stocked motor, or on new
manufacture,the number per order may be limited.
P
R
NA
=
=
=
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Code
Variant
Motor size
719080
100
1)
112132
160180
200250
280355
435
436
437
439
441
442
445
446
Terminal box
015
NA
017
NA
021
NA
180
NA
137
NA
157
NA
230
231
NA
400
NA
418
NA
NA
NA
467
Lower than standard terminal box and rubber extended cable, length 2 m
included.
NA
468
NA
469
NA
731
Testing
140
Test confirmation.
NA
145
146
Type test with report for motor from specific delivery batch.
148
760
762
NA
NA
NA
NA
NA
NA
NA
704
NA
NA
NA
*)
130
=
=
Included as standard
On modification of a stocked motor, or on new
manufacture,the number per order may be limited.
P
R
NA
=
=
=
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Sizes 71-132
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1011), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
M000090
4
Motor
size
Poles
AA
AB
AC
AD
EG
71M
2-6
112
30
145
145
120
90
110
45
14
80M
2-6
125
35
160
165
145
100
135
50
19
M5
30
12.5
M6
40
90S
2-6
140
35
175
180
150
100
140
56
24
16
M8
50
90L
2-6
140
35
175
180
150
125
165
56
19
24
M8
50
19
100L
2-6
160
40
200
205
175
140
180
112M
2-8
190
50
235
225
185
140
190
63
28
M10
60
22
70
28
M10
60
132S
2-8
216
55
270
265
205
140
22
205
89
38
M12
80
132M
2-8
216
55
270
265
205
28
178
240
89
38
M12
80
28
Motor
size
Poles
GD
HA
HD
HF
LD
71 M
2-6
11
80 M
2-6
15.5
71
10
200
255
100
80
12
225
170
10
285
116
90 S
2-6
20
90 L
2-6
20
90
12
240
185
10
310
128
90
12
240
185
10
335
100 L
2-6
128
24
100
14
275
245
12
380
112 M
2-6
144
24
112
15
290
265
12
380
144
132 S
132 M
2-6
10
33
132
18
335
300
12
465
169
2-6
10
33
132
18
335
300
12
505
169
Tolerances:
A, B, C +, - 0.8
D,DA
ISO m6
F, FA
ISO h9
H + 0, - 0.5
N ISO j6
BB
DB
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
131
Sizes 71-132
Dimension drawings
Flange-mounted; IM B5 (IM 3001), IM V1 IM 3001), IM V3 (IM 3031)
IM B14 (IM 3601), IM V18 (IM 3611), IM V19 (IM 3631)
M000091
4
IM B5 (IM3001), IM V1 (IM3011), IM V3 (IM3031)
Type
M2QA
Poles
AC
AD
DB
EG
GD
HE
71M
80M
2-6
2-8
145
165
120
145
14
19
M5
M6
30
40
12.5
16
5
6
90S
90L
2-8
2-8
180
180
150
150
24
24
M8
M8
50
50
19
19
100L
2-8
205
175
28
M10
60
22
LA
11
15.5
5
6
165
200
255
285
9
9
8
8
20
20
7
7
200
200
310
335
24
265
380
130
165
110
130
160
200
10
12
3.5
3.5
10
10
165
165
130
130
200
200
12
12
3.5
3.5
11
215
180
250
15
112M
2-8
225
185
28
M10
60
22
24
270
395
11
215
180
250
15
132S
132M
2-8
2-8
265
265
205
205
38
38
M12
M12
80
80
28
28
10
10
33
33
8
8
320
320
465
505
12
12
265
265
230
230
300
300
15
15
4
4
Flange HE
size
71M
2-6
80M
2-8
90S
2-8
90L
2-8
100L
2-8
112M
2-8
C105
C140
C120
C160
C140
C160
C140
C160
C160
C200
C160
C200
Tolerances:
D,DA
ISO m6
F, FA
ISO h9
N
ISO j6
132
145
145
165
165
185
185
185
185
255
255
265
265
P
105
140
120
160
140
160
140
160
160
200
160
200
85
115
100
130
115
130
115
130
130
165
130
165
70
95
80
110
95
110
95
110
110
130
110
130
M6
M8
M6
M8
M8
M8
M8
M8
M8
M10
M8
M10
2.5
3
3
3.5
3
3.5
3
3.5
3.5
3.5
3.5
3.5
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Sizes 71-132
Dimension drawings
Foot- and flange-mounted; M B35 (IM 2001), IM V15 (IM 2011), IM V 36 (IM 2031)
M000092
4
Motor
size
Poles
AA
AB
AC
AD
BB
DB
EG
71M
80M
90S
90L
100L
112M
132S
132M
2-6
2-8
2-8
2-8
2-8
2-8
2-8
2-8
112
125
140
140
160
190
216
216
30
35
35
35
40
50
55
55
145
160
175
175
200
235
270
270
145
165
180
180
205
225
265
265
120
145
150
150
175
185
205
205
90
100
100
125
140
140
140
178
110
135
140
165
180
190
205
240
45
50
56
56
63
70
89
89
14
19
24
24
28
28
38
38
M5
M6
M8
M8
M10
M10
M12
M12
30
40
50
50
60
60
80
80
12.5
16
19
19
22
22
28
28
5
6
8
8
8
8
10
10
Motor
size
Poles
71M
80M
90S
90L
100L
112M
132S
132M
2-6
2-8
2-8
2-8
2-8
2-8
2-8
4-8
Tolerances:
A, B, C +- 0.8
D,DA
ISO m6
F, FA
ISO h9
GD
HA
HD
HF
11
15.5
20
20
24
24
33
33
5
6
7
7
7
7
8
8
71
80
90
90
100
112
132
132
10
12
12
12
14
15
18
18
200
225
240
240
275
290
335
335
170
185
185
245
265
300
300
7
10
10
10
12
12
12
12
LA
LD
255
285
310
335
380
395
465
505
9
9
10
10
11
11
12
12
100
116
128
128
138
144
169
169
130
165
165
165
215
215
265
265
110
130
130
130
180
180
230
230
160
200
200
200
250
250
300
300
10
12
12
12
15
15
15
15
3.5
3.5
3.5
3.5
4
4
4
4
H + 0, -0.5
N ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
133
Sizes 160-250
Dimension drawings
Foot-mounted; IM B3 (IM 1001), IM B6 (IM 1051), IM B7 (IM 1061),
IM B8 (IM 1071), IM V5 (IM 1011), IM V6 (IM 1031)
M000093
Motor
size
Poles
AA
AB
AC
AD
BB
DB
EG
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
254
254
279
279
318
356
356
356
406
406
60
60
70
70
70
75
75
75
80
80
325
325
350
350
390
435
435
435
490
490
330
330
355
350
395
440
450
450
515
515
255
255
270
270
305
335
335
335
395
395
210
254
241
279
305
286
311
311
349
348
265
310
315
350
380
380
405
405
455
455
108
108
121
121
133
149
149
149
168
168
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
Motor
size
Poles
GD
HA
HD
HF
LD
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
12
12
14
14
16
18
16
18
18
18
47
47
42.5
42.5
49
53
49
53
53
58
8
8
9
9
10
11
10
11
11
11
160
160
180
180
200
225
225
225
250
250
22
22
22
22
25
28
28
28
30
30
415
415
450
450
510
560
560
560
645
645
380
380
420
420
470
520
520
520
580
580
15
15
15
15
19
19
19
19
24
24
600
645
670
710
770
820
815
840
930
930
250
250
270
270
285
340
310
340
360
360
Tolerances:
A, B, C +, - 0.8
D,DA
ISO k6 < 50 mm
ISO h9 > 50 mm
134
F, FA
H
ISO h0
+ 0, - 0.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Sizes 160-250
Dimension drawings
M000094
4
Motor
size
Poles
AD
DB
EG
GD
HE
LA
160 M
160 L
180 M
180 L
200 L
225 S
225 M
2-8
2-8
2-4
4-8
2-8
4-8
2
255
255
270
270
305
335
335
42
42
48
48
55
60
55
M16
M16
M16
M16
M20
M20
M20
110
110
110
110
110
140
110
36
36
36
36
39
39
39
12
12
14
14
16
18
16
47
47
42.5
42.5
49
53
49
8
8
9
9
10
11
10
400
400
420
420
470
520
520
600
645
670
710
770
820
815
15
15
18
18
20
20
20
300
300
300
300
350
400
400
250
250
250
250
300
350
350
350
350
350
350
400
450
450
19
19
19
19
19
19
19
5
5
5
5
5
5
5
225 M
250 M
250 M
4-8
2
4-8
335
395
395
60
60
65
M20
M20
M20
140
140
140
39
39
39
18
18
18
53
53
53
11
11
11
520
655
655
840
930
930
20
22
22
400
500
500
350
450
450
450
550
550
19
19
19
5
5
5
Tolerances:
D,DA
ISO k6 < 50 mm
ISO m6 > 50 mm
F, FA
ISO h9
N
ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
135
Sizes 160-250
Dimension drawings
Foot- and flange-mounted; IM B35 (IM 2001), IM V15 (IM 2011), IM V36 (IM 2031)
M000095
Motor
size
Poles
AA
AB
AC
AD
BB
DB
EG
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
254
254
279
279
318
356
356
356
406
406
60
60
70
70
70
75
75
75
80
80
325
325
350
350
390
435
435
435
490
490
330
330
355
350
395
440
450
450
515
515
255
255
270
270
305
335
335
335
395
395
210
254
241
279
305
286
311
311
349
349
265
310
315
350
380
380
405
405
455
455
108
108
121
121
133
149
149
149
168
168
42
42
48
48
55
60
55
60
60
65
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
110
110
110
110
110
140
110
140
140
140
36
36
36
36
39
39
39
39
39
39
12
12
14
14
16
18
18
18
18
18
47
47
42.5
42.5
49
53
49
53
53
53
Motor
size
Poles
GD
HA
HD
HF
LA
LD
160 M
160 L
180 M
180 L
200 L
225 S
225 M
225 M
250 M
250 M
2-8
2-8
2-4
4-8
2-8
4-8
2
4-8
2
4-8
8
8
9
9
10
11
10
11
11
11
160
160
180
180
200
225
225
225
250
250
22
22
22
22
25
28
28
28
30
30
415
415
450
450
510
560
560
560
645
645
380
380
420
420
470
520
520
520
580
580
15
15
15
15
19
19
19
19
24
24
600
645
670
710
770
820
815
840
930
930
15
15
18
18
20
20
20
20
22
22
250
250
270
270
285
340
310
340
360
360
300
300
300
300
350
400
400
400
500
500
250
250
250
250
300
350
350
350
450
450
350
350
350
350
400
450
450
450
550
550
19
19
19
19
19
19
19
19
19
19
5
5
5
5
5
5
5
5
5
5
Tolerances:
A, B, C +, - 0.8
D,DA
ISO k6 > 50 mm
ISO m6 > 50 mm
136
F, FA
H
N
ISO h9
+ 0, - 0.5
ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Sizes 280-355
Dimension drawings
M000096
4
Motor
size
Poles A
AA
AB
AC
B'
BA
BB
CA
CA '
DA
DB
DC
EA
EG
EH
280 SM_ 2
4-12
457 85
457 85
530
530
572
572
368
368
419
419
146 506
146 506
190
190
400
400
349
349
65
75
60
65
M20
M20
M20
M20
140
140
140
140
40
40
40
40
315 SM_ 2
4-12
508 100
508 100
590
590
645
645
406
406
457
457
163 556
163 556
216
216
465
465
414
414
65
80
60
75
M20
M20
M20
M20
140
170
140
140
40
40
40
40
315 ML_ 2
4-12
508 100
508 100
590
590
645
645
457
457
508
508
163 607
163 607
216
216
465
465
414
414
65
90
60
75
M20
M24
M20
M20
140
170
140
140
40
48
40
40
355 _
2
4-12
610 120
610 120
700
700
740
740
500
500
161 662
161 662
254
254
460
460
70
100
70
90
M20
M24
M20
M24
140
210
140
170
40
48
40
48
Motor
size
Poles F
GA
GB
GC
GD
HA
HC
HD
LA
LC
LD
FA
GF
O
1)
280 SM_ 2
4-12
18
20
18
18
58
69
53
67.5 79.5 58
315 SM_ 2
4-12
18
22
18
20
58
71
315 ML_ 2
4-12
18
25
18
20
58
84
355 S_
20
28
20
25
2
4-12
Tolerances:
D, DA ISO M6
H
+ 0, - 1.0
11
12
11
11
280
280
40
40
566
566
745
745
24
24
1088
1088
22
22
1238
1238
332
332
100
100
69
85
53
64
11
67.5 79.5 14
11
12
315
315
50
50
638
638
840
840
30
30
1218
1248
25
25
1367
1397
351
381
115
115
69
95
53
64
11
67.5 79.5 14
11
12
315
315
50
50
638
638
840
840
30
30
1269
1299
25
25
1418
1448
351
381
115
115
12
14
355
355
55
55
725
725
955
955
35
35
1344
1414
25
25
1494
1594
397
467
130
130
1)
2)
64
69
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
137
Sizes 280-355
Dimension drawings
M000097
4
Motor
size
Poles
AC
DA
DB
DC
EA
EG
EH
FA
GA
GB
GC
GD
GF
280 SM_
2
4-12
572
572
65
75
60
65
M20
M20
M20
M20
140
140
140
140
40
40
40
40
18
20
18
18
58
67.5
69
79.5
53
58
64
69
11
12
11
11
315 SM_
2
4-12
645
645
65
80
60
75
M20
M20
M20
M20
140
170
140
140
40
40
40
40
18
22
18
20
58
71
69
85
53
67.5
64
79.5
11
14
11
12
315 ML_
2
4-12
645
645
65
90
60
75
M20
M24
M20
M20
140
170
140
140
40
48
40
40
18
25
18
20
58
81
69
95
53
67.5
64
79.5
11
14
11
12
355 S_
2
4-12
746
645
70
100
70
90
M20
M24
M20
M24
140
210
140
170
40
48
40
48
20
28
20
25
62.5
90
74.5
106
62.5
81
74.5
95
12
16
12
14
Motor
size
Poles
HB
LA
LB
LC
LD
280 SM_
2
4-12
465
465
1088
1088
22
22
938
938
1238
1238
332
332
500
500
450
450
100
100
550
550
18
18
5
5
315 SM_
2
4-12
525
525
1218
1248
25
25
1078
1078
1367
1397
351
381
600
600
550
550
115
115
660
660
23
23
6
6
315 ML_
2
4-12
525
525
1269
1299
25
25
1129
1199
1418
1448
351
381
600
600
550
550
115
115
660
660
23
23
6
6
355 S_
2
4-12
600
600
1344
1414
25
25
1204
1204
1494
1594
397
467
740
740
680
680
130
130
800
800
23
23
6
6
1)
Tolerances:
D, DA ISO M6
F
ISO h9
H
+ 0, - 1.0
N
ISO j6 (280)
ISO js6 (315)
1)
2)
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
138
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Sizes 280-355
Dimension drawings
M000098
Foot- and flange-mounted; M B35 (IM 2001), IM V15 (IM 2011), IM V 36 (IM 2031)
4
Motor
size
Poles A
AA
AB
AC B
B'
BA
BB
CA
CA ' D
DA
DB
DC
EA
EG
EH
FA
280 SM_ 2
4-12
457 85
457 85
400
400
349 65
349 75
60
65
M20
M20
M20 140
M20 140
140
140
40
40
40
40
18
20
18
18
315 SM_ 2
4-12
508 100
508 100
465
465
414 65
414 80
60
75
M20
M20
M20 140
M20 170
140
140
40
40
40
40
18
22
18
20
315 ML_ 2
4-12
508 100
508 100
465
465
414 65
414 90
60
75
M20
M24
M20 140
M20 170
140
140
40
48
40
40
18
25
18
20
355 _
2
4-12
610 120
610 120
460
460
70
100
70
90
M20
M24
M20 140
M24 210
140
170
40
48
40
48
20
28
20
25
Motor
size
Poles G
GB
HD
LA
LC
LD
GA
GC
GD GF
HA
HC
O
1)
280 SM_ 2
4-12
58 69
53
67.5 79.5 58
315 SM_ 2
4-12
58
71
315 ML_ 2
4-12
58
84
355 S_
2
4-12
11 11
12 11
280 40
280 40
566
566
745
745
24
24
1088 22
1088 22
1238 332
1238 332
500
500
450
450
550
550
18
18
5
5
100
100
69
85
53 64 11 11
67.5 79.5 14 12
315 50
315 50
638
638
840
840
30
30
1218 25
1248 25
1367 351
1397 381
600
600
550
550
660
660
23
23
6
6
115
115
69
95
53 64 11 11
67.5 79.5 14 12
315 50
315 50
638
638
840
840
30
30
1269 25
1299 25
1418 351
1448 381
600
600
550
550
660
660
23
23
6
6
115
115
355 55
355 55
725
725
955
955
35
35
1344 25
1414 25
1494 397
1594 467
645
715
740
740
680
680
23
23
6
6
130
130
Tolerances:
D, DA ISO M6
F
ISO h9
H
+ 0, - 1.0
N
ISO j6 (280)
ISO js6 (315)
64
69
1)
2)
Cooling distance.
Second shaft end on request.
Above table gives the main dimensions in mm.
For detailed drawings please see our web-pages
'www.abb.com/motors&drives' or contact us.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
139
Rating plates
For motor sizes 71 to 132 the rating plate gives one
current value for the voltage area. That is the highest
current that can occur within the voltage area with the
given output.
M000100
M000101
140
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Motor construction
13
12
11
10
4
M000098
9
8
7
1
2
3
4
5
6
7
Endshield, D-end
Terminal box
Rating plate
Rotor
Fan
Fan cover
Terminal box cover
8
9
10
11
12
13
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Stator
Bolt
Bearing
Wave-shape spring ring
Endshield, N-end
Screw
141
71
90
100
112
132
160
Material
Paint thickness
Bearing end
Material
shields
Paint thickness
D-end
6202
DDU C3
6204
DDU C3
6205
DDU C3
6206
DDU C3
6207
DDU C3
6208
DDUC3
6309
ZZ C3
N-end
6202
DDU C3
6204
DDU C3
6205
DDU C3
6206
DDU C3
6206
DDU C3
6207
DDU C3
6209
ZZ C3
Bearings
Axially-locked
bearings
Lubrication
80
Rating plate
Material
Stainless steel
Terminal box
Frame material
Cover material
Cable entries
Terminals
Fan
Material
Fan cover
Material
Steel
Paint thickness
Material
Insulation
Copper
Insulation class F
Winding protection
On request
Material
Connections
Stator winding
Rotor winding
Balancing method
Key ways
Enclosure
IP 55
Cooling method
IC 411
142
2xM40x1.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
Bearings
Axially-locked
bearings
180
Terminal box
225
250
280
315
Paint thickness
Material
Paint thickness
D-end 2 pole
4 to 8 pole
6310
ZZ C3
6312
ZZU C3
6313
ZZ C3
6314 C3
6316/C4
6316/C3
6316/C4
6319/C3
6319M/C3
6322/C3
N-end 2 pole
4 to 8 pole
6210
ZZ C3
6212
ZZ C3
6213
ZZ C3
6214 C3
6316/C4
6316/C3
6316/C4
6316/C3
6319M/C3
6319/C3
Material
Regreasable bearings
Stainless steel
Frame material
Cover material
Cable entries
2xM40x1.5
2xM63 + 2xM20
Terminals
Fan
Material
Fan cover
Material
Steel
Connections
Stator winding
Rotor winding
355
Material
Lubrication
Rating plate
200
Paint thickness
Material
Copper
Insulation
Insulation class F
Winding protection
On request
Material
Balancing method
Key way
Enclosure
IP 55
Cooling method
IC 411
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
143
144
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Cast iron EN 12-2006
General Purpose
Open Drip Proof Motors
Open drip proof squirrel cage three phase
low voltage motors,
Sizes 280 - 400, 110 to 800 kW
5
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design ..............................146
Ordering information...........................151
Technical data......................................152
Variant codes .......................................157
Dimension drawings............................159
Rating plates........................................163
Open drip proof motors in brief .........164
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
145
Mechanical design
Stator
The stator frame is made of profile-pressed sheet steel,
giving the motor high mechanical stregth, low weight
and a good surface finish. The stator core is welded
into the stator frame and contributes to its excellent
mechanical properties.
Drain holes
Motors that will be operated in very humid or wet
environments, and especially under intermittent duty,
should be provided with drain holes. The appropriate
IM designation, such as IM V3 (IM 3031), is specified,
on the basis of the method of motor mounting.
M000103
M2FA motors are fitted with drain holes and plugs. The
closed
5
open
open
Terminal box
Terminal boxes are mounted either on the top of the
motor, or on either side of the motor, see ordering information page .
146
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Deviations from standard design according to the following tables are available on request.
Terminal
box
Flange or
adapter
Cable
diameter
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x150
2x240
2x240
4x240
2x240
4x240
M12
M12
M12
M12
M12
M12
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
3GZF 294730-301
3GZF 294730-301
3GZF 294730-301
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
3GZF 294730-501
2x 32-49
2x 32-49
2x 32-49
2x 48-60
2x 48-60
2x 48-60
2x 60-80
2x 60-80
2x 60-80
2x 60-80
2x150
2x240
2x240
4x240
2x240
4x240
4x240
4x240
4x240
4x240
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 32-49
2x 32-49
2x 32-49
2x150
2x240
2x240
M12
M12
M12
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 3GZF 294730-613
2x 32-49
2x 32-49
2x 32-49
2x150
2x240
2x240
M12
M12
M12
Cable box
or cable gland
Gland
thread
Voltage/
freq.
code
122/4
142/4
142/4
162/4
142/4
162/4
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
D
E
122/4
142/4
142/4
162/4
142/4
162/4
162/4
162/9
162/4
162/9
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
3GZF 294730-944
D
E
D
E
122/4
142/4
142/4
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
122/4
142/4
142/4
3GZF 294730-749
3GZF 294730-753
3GZF 294730-753
Voltage/frequency codes:
D - 380-420 VD 50 Hz, 660-690 VY 50 Hz, 440-480 VD 60 Hz
E - 500 VD 50 Hz, 575 VD 60 Hz
Adapter E-D
(standard)
3GZF294730-944
Terminal box
Flange with
cable gland
Flange with
cable box
Adapter E-2D
(optional)
3GZF294730-945
Cable box
Optional
3GZF294730-301
Cable box
3GZF294730-501
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
147
M000065
Examples:
Terminal
box
Opening
type
Max.rate
current
A
(Y/D-conn.)
Max. size
of
conductor
mm2
Cable
entry
mm
Cable box
Blank
plate
280
122/4
C (FL21)
210/360
2x150
1xPg29...42
2xPg29...42
1x36...52/48...60
1x36...52/48...60
MKLN 20
315
142/4
D (FL33)
370/640
2x185
1xPg36...42
2xPg36...48
1x36...52/48...60
2x48...60/50...68
MKLN 30
355, 400
142/4
D (FL33)
370/640
2x240
E-D 1)
550/950
4x240
E-2D1)
550/950
4x240
1x36...52/48...60
2x48...60/50...68
1x36...52/48...60
2x48...60/50...68
2x268.. .80
2x1x36...52/48...60
2x2x48...60/50...68
2x268...80
MKLN 30
162/4
1xPg36...42
2xPg36...48
1xPg36...42
2xPg36...48
1)
2x1Pg36...42
2x2Pg36...48
Terminal box type 162/4 is used with a combination of one E-opening and one or two D-openings,
as described below:
E-opening
Adapter E-2D
5
Adapter E-D
D-openings
M000088
Adaptor E - D
148
Opening
C (FL 21)
62
193
62
193
M8
D (FL 33)
100
300
80
292
M10
E (FL 40)
115
370
100
360
M12
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Bearings
The motors are normally fitted with
single-row deep groove ball bearings as listed in the table on the
right. The complete ball bearing
designation is stated on the rating
plate.
Motor
Number
size
of poles
D-end
N-end
D-end
280
6316/C4
6316/C4
4-8
6319/C3
6316/C3
(NU 319/C3)
315
355
6316/C4
6316/C4
4-8
6319/C3
6316/C3
(NU319/C3)
400
1)
2
1)
4-8
6322/C3
6319/C3
(NU 322/C3)
6322/C3
6319/C3
(NU 322/C3)
Bearing seals
M2FA motors have, as standard, V-rings at both ends.
The size and type of suitable seals are in accordance
with the table below:
Motor size
Number of
poles
d1
d2
B1
Standard design
Axial seal
D-end
N-end
Alternative design
Radial seal (DIN 3760)
280
2
4-8
2
4-8
2
4-8
4-8
80
95
80
95
95
110
110
100
120
100
120
120
140
140
13.5
13.5
13.5
13.5
13.5
15.5
15.5
10
12
10
12
12
12
12
VS 80
VS 80
VS 80
VS 95
VS 95
VS 110
VS 110
80x100x10 1)
95x120x12
80x100x10 1)
95x120x12
95x120x12 1)
110x140x12 1)
110x140x12 1)
315
355
400
Viton-seal
V-Ring
M000072
1)
VS 80
VS 80
VS 80
VS 80
VS 95
VS 95
VS 95
Radial seal
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
149
Permissible radial and axial force for a bearing life of 40,000 hours
Permissible radial force for:
Motor
size
Number
of poles
Length of
shaft
extension
E (mm)
280
2
4
6
8
140
170
170
170
5850
8900
10200
11200
4500
7050
8100
8900
26100
29500
32100
11400
11300
11100
3800
5300
6500
7450
7150
8800
10100
11200
2250
3800
4700
5500
315
2
4
6
8
140
170
170
170
5800
9000
10200
11300
4800
7300
8350
9200
26200
29600
32300
14000
14200
14300
3700
5000
6350
7300
7450
9250
10800
12200
1800
2750
3300
4300
355
2
4
6
8
140
210
210
210
6200
12100
13800
15200
5400
9800
11200
12300
36500
41500
45000
18100
20200
21000
2100
4100
5500
6900
2)
2)
2)
2)
2)
2)
2)
2)
170
210
210
210
2)
2)
2)
10500
13500
2)
12200
37500
2)
3900
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
400
2
4
6
8
Ball bearing at
point of application:
FXmax
FX0
N
N
Roller bearing at
point of application:
FX0
FXmax
N
N
Direction of force
Outwards Upwards
N
N
Downwards
N
1)
M000145
150
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Ordering information
Sample order
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
M2FA 315SMA
Pole number
2
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
200 kW
Product code
3GFA312210-ASB
Variant codes if needed
A
B
M2FA 315 SMA
C
D,E,F, G
3GFA 312 210 - ADA, 003 etc.
1-4
5-6 7 8-10 11 12 13 14
A Motor type
B Motor size
C Product code
D Mounting arrangement code
E Voltage and frequency code
F Generation code
G Variant codes
Positions 1 to 4
3GFA = Open drip proof squirrel cage three phase
motor with steel frame
Positions 5 and 6
IEC-frame size
28 = 280
35 = 355
31 = 315
40 = 400
Position 7
Speed (pole pairs)
1 = 2 poles 6 = 8 poles
2 = 4 poles 7 => 12 poles
3 = 6 poles 8 = Two-speed motors
4 = 8 poles 9 = Multi-speed motors
5 = 10 poles
Position 13
Voltage/frequency code
See tables below
Position 8 to 10
Serial number
Position 14
Generation code
A, B, C...
Position 11
- (dash)
B
380 V' 50 Hz
D
380-420 V' 50 Hz
660-690 VY 50 Hz
440-480 V' 60 Hz
E
500 V' 50 Hz
575 V' 60 Hz
F
500 VY 50 Hz
575 VY 60 Hz
S
220-240 V' 50 Hz
380-420 VY 50 Hz
440-480 VY 60 Hz
T
660 V' 50 Hz
U
690 V' 50 Hz
X
Other rated voltage,
connection or frequency,
max. 690 V
H
415 V' 50 Hz
Code letters for supplementting the product code for voltage and frequency two-speed motors:
A
220 V 50 Hz
380 V 50 Hz
380-400 V 50 Hz
440-480 V 60 Hz
500 V 50 Hz
575 V 60 Hz
400-415 V 50 Hz
460-480 V 60 Hz
220-230 V 50 Hz
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
151
Output
kW
Motor type
Product code
r/min
2)
1)
5)
5)
5)
5)
Is
Torque
TN
Ts
Tmax
100%
Current
IN
cos M
A
IN
Nm
TN
TN
400 V 50 Hz
Basic design
280 SMA
315 SA
315 SMA
315 MB
315 MC
315 LA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
281 210-A
311 110-A
311 210-A
311 320-A
311 330-A
311 510-A
2971
2977
2975
2975
2977
2969
94.5
94.2
94.4
94.5
94.6
94.9
0.84
0.86
0.86
0.87
0.84
0.89
241
289
353
431
573
606
7.0
6.7
7.1
7.1
7.8
6.8
424
513
643
804
1012
1142
2.1
1.6
1.8
1.9
2.1
2.0
2.4
2.5
2.6
2.6
2.8
2.5
M2FA
M2FA
M2FA
M2FA
M2FA
315 LB
355 SA
355 MA
355 MB
355 LA
3GFA
3GFA
3GFA
3GFA
3GFA
311 520-A
351 110-A
351 310-A
351 320-A
351 510-A
2969
2982
2978
2973
2981
94.8
94.7
95.0
95.1
95.5
0.88
0.88
0.89
0.90
0.89
700
680
765
851
956
7.3
7.1
7.4
6.7
8.7
1288
1280
1443
1606
1794
2.0
1.1
1.3
1.2
1.5
2.6
2.6
3.0
2.7
3.1
M2FA 280 MB
400 V 50 Hz
3GFA 281 320-A
Power
factor
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
Efficiency
Speed
%
2971
94.9
High-output design
0.88
279
7.0
400 V 50 Hz
514
2.0
2.7
Basic design
110
132
M2FA 280 SA
M2FA 280 SMA
1476
1477
93.1
93.8
0.83
0.84
211
245
5.8
5.9
713
853
1.8
1.8
2.4
2.3
160
200
250
315
M2FA
M2FA
M2FA
M2FA
315 SA
315 SMA
315 MB
315 LA
3GFA
3GFA
3GFA
3GFA
312 110-A
312 210-A
312 320-A
312 510-A
1483
1482
1481
1477
94.6
94.7
94.9
94.5
0.83
0.83
0.83
0.83
297
366
452
577
6.5
6.5
6.7
6.7
1030
1287
1611
2036
1.8
1.8
1.7
2.2
2.5
2.3
2.3
2.5
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
355 SA
355 SB
355 SC
355 MA
355 LA
355 LKD
400 LKA
400 LKB
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
3GFA
352 110-A
352 120-A
352 130-A
352 310-A
352 510-A
352 540-A
402 510-A
402 520-A
1484
1485
1484
1485
1486
95.0
95.4
95.3
95.4
95.4
0.85
0.82
0.82
0.83
0.81
555
653
733
810
920
6.4
6.6
5.9
6.5
7.7
2027
2282
2574
2896
3213
1.7
1.9
1.7
1.8
2.0
2.4
2.5
2.2
2.4
2.8
315
355
400
450
500
600
710
800
1)
2)
2)
2)
1)2)
M2FA 280 MB
4)
4)
4)
400 V 50 Hz
3GFA 282 320-A
1480
94.0
High-output design
0.81
305
7.2
1032
2.5
2.6
152
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Output
kW
Motor type
2)
1)
5)
5)
5)
5)
Speed
r/min
EffiPower
ciency factor
%
cos M
Current
IN
A
Speed
r/min
380 V 50 Hz
EffiPower Current
ciency factor IN
%
cos M A
415 V 50 Hz
Moment of
Sound
inertia
pressure
J = GD2 Weight level LP
kgm2
kg
dB(A)
Basic design
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
280 SMA
315 SA
315 SMA
315 MB
315 MC
315 LA
2969
2975
2974
2974
2974
2965
94.4
94.2
94.3
94.4
94.6
94.8
0.86
0.87
0.87
0.88
0.86
0.89
246
302
370
449
576
635
2966
2978
2978
2976
2971
2970
94.1
94.2
94.4
94.5
94.6
94.9
0.87
0.84
0.84
0.85
0.88
0.86
227
282
344
420
530
591
0.8
1.2
1.4
1.7
1.7
2.1
540
695
770
840
840
975
87
92
92
92
92
92
M2FA
M2FA
M2FA
M2FA
M2FA
315 LB
355 SA
355 MA
355 MB
355 LA
2966
2980
2975
2970
2978
94.7
94.6
94.9
95.1
95.5
0.88
0.90
0.90
0.90
0.90
720
700
795
880
980
2970
2983
2979
2974
94.8
94.7
95.0
95.1
0.85
0.87
0.87
0.87
683
663
746
830
2.1
3.2
3.5
3.5
4.8
975
1220
1320
1320
1530
92
93
93
93
93
380 V 50 Hz
160
2968
M2FA 280 MB
94.8
4)
415 V 50 Hz
0.88
288
2973
94.9
High-output design
0.86
269
1.15
89
380 V 50 Hz
110
132
M2FA 280 SA
M2FA 280 SMA
1474
1474
92.8
93.2
0.85
0.86
217
255
1477
1478
93.1
93.8
0.82
0.83
206
239
1.15
1.4
445
490
81
81
160
200
250
315
M2FA
M2FA
M2FA
M2FA
315 SA
315 SMA
315 MB
315 LA
1481
1480
1479
1475
94.5
94.6
94.7
94.5
0.85
0.85
0.86
0.85
306
379
470
596
1481
1483
1482
1473
94.6
94.8
94.9
93.5
0.84
0.82
0.83
0.86
283
360
441
540
2
2.3
2.9
3.5
680
735
850
970
86
86
86
87
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
M2FA
355 SA
355 SB
355 SC
355 MA
355 LA
355 LKD
400 LKA
400 LKB
1482
1484
1482
1483
1484
94.8
95.3
95.2
95.3
95.3
0.86
0.84
0.85
0.85
0.84
584
670
746
835
949
1485
1485
1483
1484
1486
95.0
95.4
95.1
95.4
95.4
0.83
0.83
0.84
0.83
0.83
541
622
685
798
880
5.5
5.5
5.5
6.5
7.8
9.8
1220
1220
1220
1350
1550
1820
2700
2700
89
89
89
89
89
315
355
400
450
500
600
710
800
1)
2)
2)
2)
1)2)
Basic design
4)
4)
4)
380 V 50 Hz
160
1478
M2FA 280 MB
415 V 50 Hz
580
93.9
415 V 50 Hz
0.84
310
1481
94.0
High-output design
0.81
298
1.7
550
87
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
153
Output
kW
Motor type
Product code
r/min
1)
1)
200
250
300
90
110
132
150
185
1)
1)
1)
1)
Ts
Tmax
IN
Nm
TN
TN
400 V 50 Hz
Basic design
987
987
92.8
93.1
0.76
0.76
155
187
5.8
6.1
725
870
1.9
2.0
2.2
2.3
M2FA
M2FA
M2FA
M2FA
3GFA
3GFA
3GFA
3GFA
313 110-A
313 210-A
313 320-A
313 510-A
988
988
988
987
93.5
94.0
94.1
94.4
0.81
0.83
0.82
0.83
210
248
300
346
7.4
7.6
8.2
8.5
1062
1275
1545
1788
1.7
1.8
1.9
1.9
2.6
2.7
2.8
2.9
3GFA
3GFA
3GFA
353 110-A
353 120-A
353 310-A
990
990
990
94.7
94.8
95.1
0.82
0.83
0.81
373
457
541
7.1
7.3
7.2
1927
2409
2894
1.6
1.6
1.7
2.5
2.5
2.4
3GFA
283 320-A
0.76
227
6.5
315 SA
315 SMA
315 MB
315 LA
M2FA 280 MB
400 V 50 Hz
987
93.6
High-output design
400 V 50 Hz
1063
2.1
2.3
Basic design
M2FA 280 SA
M2FA 280 SMA
3GFA
3GFA
284 110-A
284 210-A
738
738
91.2
91.8
0.78
0.76
117
161
5.6
6.1
711
970
1.2
1.4
2.0
2.1
3GFA
3GFA
3GFA
314 210-A
314 320-A
314 510-A
739
739
739
92.9
93.4
93.3
0.79
0.78
0.78
183
224
268
6.8
7.3
7.2
1162
1420
1706
1.7
1.8
1.8
2.5
2.6
2.6
M2FA 355 SA
M2FA 355 SB
3GFA
3GFA
354 110-A
354 120-A
740
740
93.4
93.9
0.75
0.76
318
381
5.3
5.6
1934
2385
1.3
1.4
2.0
2.0
3GFA
284 320-A
0.75
192
6.7
Torque
TN
283 110-A
283 210-A
Is
100%
Current
IN
cos M
A
3GFA
3GFA
M2FA 355 SA
M2FA 355 SB
M2FA 355 MA
1)
Power
factor
M2FA 280 SA
M2FA 280 SMA
Efficiency
Speed
%
M2FA 280 MB
400 V 50 Hz
739
92.6
High-output design
1162
1.6
2.2
154
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Output
kW
Motor type
Speed
r/min
EffiPower
ciency factor
%
cos M
Current
IN
A
Speed
r/min
EffiPower Current
ciency factor IN
%
cos M A
380 V 50 Hz
75
90
M2FA 280 SA
M2FA 280 SMA
985
986
92.7
92.9
0.79
0.79
158
190
986
987
92.7
93.1
0.79
0.78
146
178
1.65
2.6
440
475
2)
M2FA
M2FA
M2FA
M2FA
986
986
986
986
93.4
93.7
94.0
94.2
0.85
0.85
0.85
0.85
212
256
310
352
989
989
989
988
93.5
94.0
94.1
94.4
0.78
0.81
0.8
0.79
209
242
300
340
2.9
3.8
4.5
5.4
630
720
810
915
2)
989
989
988
94.5
94.7
94.9
0.84
0.84
0.85
385
478
546
990
991
991
94.7
94.8
95.1
0.81
0.81
0.82
364
446
528
8.7
10.2
12.5
1220
1320
1550
2)
0.79
231
988
0.77
219
2.9
110
132
160
185
1)
1)
200
250
300
315 SA
315 SMA
315 MB
315 LA
M2FA 355 SA
M2FA 355 SB
M2FA 355 MA
1)
M2FA 280 MB
415 V 50 Hz
Moment of
Sound
inertia
pressure
J = GD2 Weight level LP
kgm2
kg
dB(A)
380 V 50 Hz
986
93.4
Basic design
415 V 50 Hz
93.6
2)
2)
2)
2)
2)
2)
High-output design
2)
380 V 50 Hz
55
75
M2FA 280 SA
M2FA 280 SMA
736
736
89.9
91.7
0.81
0.79
119
161
739
739
91.2
91.8
0.77
0.75
114
157
1.85
2.2
460
500
2)
738
738
737
92.7
93.2
93.1
0.80
0.80
0.80
186
233
275
740
740
740
92.9
93.4
93.3
0.76
0.76
0.76
179
219
262
3.8
4.5
5.4
720
810
915
2)
M2FA 355 SA
M2FA 355 SB
739
739
93.3
93.7
0.77
0.78
322
393
741
741
93.4
93.9
0.73
0.74
311
372
8.7
10.2
1220
1320
2)
0.78
192
740
0.74
188
2.9
90
110
132
150
185
1)
1)
1)
1)
M2FA 280 MB
415 V 50 Hz
545
380 V 50 Hz
738
92.5
Basic design
415 V 50 Hz
92.6
2)
2)
2)
2)
High-output design
575
2)
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
155
Product
code
Speed
r/min
Efficiency
%
Power
factor
cos M
Is
TN
Ts
Tmax
IN
Nm
TN
TN
Moment
of inertia
J = GD2 Weight
kgm2
kg
90/30
168/65
6.7/7.2
581/290
1.7/2.6
2.7/2.4
1.4
490
110/32
M2FA 280 MB
204/69
7.4/7.3
709/309
2.1/2.7
2.8/2.7
1.7
550
132/40
239/84
6.3/6.4
849/386
1.5/2.1
2.4/2.4
2.3
735
170/50
M2FA 315 MB
310/103 7.3/6.3
1092/483
1.8/2.3
2.8/2.3
2.9
850
200/63
M2FA 315 LA
362/130 7.7/7.4
1285/608
2.0/2.8
2.9/2.7
3.5
970
260/85
M2FA 355 SA
473/171 6.3/7.0
1670/820
1.4/2.3
2.4/2.4
5.5
1220
620/199 7.0/6.5
2182/966
1.5/2.1
2.7/2.3
6.5
1320
680/240 7.0/8.8
2569/1155
1.3/2.3
2.4/3.0
7.8
1550
100/25
185/62
6.2/4.1
646/325
1.5/1.5
2.4/1.7
1.4
490
110/28
M2FA 280 MB
199/67
6.7/4.1
710/364
1.7/1.5
2.4/1.7
1.7
550
140/35
259/87
6.8/4.7
900/452
1.5/1.6
2.6/1.9
2.3
735
185/46
M2FA 315 MB
333/110 6.5/4.2
1191/595
1.5/1.4
2.4/1.7
2.9
850
220/55
M2FA 315 LA
397/136 7.6/4.6
1415/711
1.7/1.5
2.8/2.0
3.5
975
250/63
M2FA 355 MA
440/148 6.3/4.0
1607/813
1.1/1.0
2.3/1.7
6.5
1320
315/80
M2FA 355 LA
560/195 8.0/5.0
2020/1031
1.7/1.4
2.9/2.0
7.8
1550
Torque
IN
75/50
140/105 6.2/6.3
484/485
1.5/2.4
2.3/2.4
1.4
490
90/60
M2FA 280 MB
169/131 6.8/6.9
580/581
1.7/2.7
2.5/2.6
1.7
550
120/80
225/171 6.3/6.2
771/773
1.5/2.3
2.5/2.3
2.3
735
285/215 7.6/6.6
986/966
1.8/2.5
2.9/2.5
2.9
850
345/265 7.8/6.8
1189/1208
1.9/2.8
2.9/2.5
3.5
970
360/248 7.8/9.0
1284/1253
1.2/2.3
3.0/3.2
8.5
1220
439/289 8.6/8.8
1539/1542
1.6/2.4
3.4/2.8
10.2
1320
85/48
159/119 5.5/5.4
548/619
1.5/2.7
2.2/2.3
2.6
475
100/55
M2FA 280 MB
183/125 5.4/5.5
646/710
1.6/2.5
2.1/2.2
2.9
545
125/80
220/164 6.0/5.8
806/1034
1.3/1.8
2.1/2.0
4.1
755
150/95
M2FA 315 MB
262/194 6.1/5.7
967/1228
1.4/1.8
2.1/2.0
4.9
845
325/247 6.5/5.9
1192/1551
1.5/1.9
2.2/2.0
5.8
950
386/271 6.7/6.2
1446/1607
1.1/1.6
2.4/2.5
10.2
1320
512/368 8.1/7.1
1924/2054
1.5/2.0
2.8/2.9
12.5
1550
156
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Variant
Motor size
280
315
355
400
Balancing
052
417
424
037
043
SPM nipples.
058
107
420
Coupling
035
Heating elements
450
451
Insulation system
014
Mounting arrangements
009
066
Painting
114
Protection
005
072
095
135
161
1)
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
157
Code 1)
Variant
Motor size
280
315
355
400
070
122
123
125
Bimetal detectors, break type (NCC), (2x3 in series), 150C, in stator winding.
127
Bimetal detectors, break type (NCC), (3 in series, 130C & 3 in series, 150C),
in stator winding.
435
436
437
439
441
442
445
446
Terminal box
021
180
022
468
Testing
145
146
Type test with report for motor from specific delivery batch.
147
Type test with report for motor from specific delivery batch, customer witnessed.
148
149
222
Torque/speed curve, type test and multi-point load test with report for motor from specific
delivery batch.
153
760
761
762
763
1)
158
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
Dimension drawings
M000104
Motor size
Poles
AA
AB
AC
BA
BB
DB
EG
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA, LB
315 LA, LB
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
457
457
457
457
457
508
508
508
508
508
508
508
508
80
80
80
80
80
100
100
100
100
100
100
100
100
545
545
545
545
545
622
622
622
622
622
622
622
622
555
555
555
555
555
624
624
624
624
624
624
624
624
368
368
368
419
419
406
406
406
406
457
457
508
508
419
419
457
457
100
100
100
100
100
100
100
100
100
100
100
100
100
450
501
501
501
501
535
535
540
540
540
540
592
592
190
190
190
190
190
216
216
216
216
216
216
216
216
80
65
80
65
80
70
90
70
90
70
90
70
90
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
170
140
170
140
170
140
170
140
170
140
170
140
170
40
40
40
40
40
40
48
40
48
40
48
40
48
Motor size
Poles
GA
GD
HA
HC
HD
LD
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA, LB
315 LA, LB
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
22
18
22
18
22
20
25
20
25
20
25
20
25
71
58
71
58
71
62.5
81
62.5
81
62.5
81
62.5
81
85
69
85
69
85
74.5
95
74.5
95
74.5
95
74.5
95
14
11
14
11
14
12
14
12
14
12
14
12
14
280
280
280
280
280
315
315
315
315
315
315
315
315
32
32
32
32
32
32
32
32
32
32
32
32
32
556
556
556
556
556
625
625
625
625
625
625
625
625
730
730
730
730
730
820
820
820
820
820
820
820
848
24
24
24
24
24
28
28
28
28
28
28
28
28
1020
1060
1090
1120
1150
1123
1153
1223
1153
1223
1253
1293
1323
415
385
415
385
415
392
422
392
422
392
422
392
422
Tolerances:
A,B
D
F
ISO js 14
ISO m6
ISO h9
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
159
Dimension drawings
M000106
Motor size
Poles
AC
DB
EG
GA
GD
HB
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA
315 LA
315 LB
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
2
551
551
551
551
551
620
620
620
620
620
620
620
620
620
80
65
80
80
80
70
90
70
90
70
90
70
90
70
M20
M20
M20
M20
M20
M20
M24
M20
M24
M20
M24
M20
M24
M20
170
140
170
140
170
140
170
140
170
140
170
140
170
140
40
40
40
40
40
40
48
40
48
40
48
40
48
10
22
18
22
18
22
20
25
20
25
20
25
20
25
20
71
58
71
58
71
62.5
81
62.5
81
62.5
81
62.5
81
62.5
85
69
85
69
85
74.5
95
74.5
95
74.5
95
74.5
95
74.5
14
11
14
11
14
12
14
12
14
12
14
12
14
12
450
450
450
450
450
505
505
505
505
505
505
505
505
533
Motor size
Poles
LA
LB
LD
280 SA
280 SMA
280 SMA
280 MB
280 MB
315 SA
315 SA
315 SMA
315 SMA
315 MB, MC
315 MB
315 LA
315 LA
315 LB
4-8
2
4-8
2
4-8
2
4-6
2
4-8
2
4-8
2
4-8
2
1020
1060
1090
1120
1150
1123
1153
1223
1153
1223
1253
1293
1323
1293
25
25
25
25
25
25
25
25
25
25
25
25
25
25
850
920
920
980
980
983
983
1083
983
1083
1083
1153
1153
1153
410
380
410
380
410
390
420
390
420
390
420
390
420
390
600
600
600
600
600
740
740
740
740
740
740
740
740
740
550
550
550
550
550
680
680
680
680
680
680
680
680
680
660
660
660
660
660
800
800
800
800
800
800
800
800
800
23
23
23
23
23
23
23
23
23
23
23
23
23
23
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Tolerances:
D
F
N
160
ISO m6
ISO h9
ISO js6
Dimension drawings
M000105
Motor size
Poles
AA
AB
AC
BA
BB
BC
DB
EG
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
610
610
610
610
610
610
610
610
610
610
610
610
686
686
110
110
110
110
110
110
110
110
110
110
110
110
140
140
714
714
714
714
714
714
714
714
714
714
714
714
820
820
716
716
716
716
716
716
716
716
716
716
716
716
810
810
500
500
500
500
560
560
560
630
630
630
630
630
710
710
710
710
800
800
100
100
100
100
100
100
100
100
100
100
100
100
140
140
584
584
584
584
644
644
644
714
714
714
802
802
935
935
180
180
220
220
254
254
254
254
254
254
254
254
254
254
254
254
280
280
75
100
100
100
75
100
100
75
100
100
75
100
90
100
M20
M24
M24
M24
M20
M24
M24
M20
M24
M24
M20
M24
M24
M24
140
210
210
210
140
210
210
140
210
210
140
210
170
210
40
48
48
48
40
48
48
40
48
48
40
48
48
48
Motor size
Poles
GA
GD
HA
HC
HD
LD
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
20
28
28
28
20
28
28
20
28
28
20
28
25
28
67.5
90
90
90
67.5
90
90
67.5
90
90
67.5
90
81
90
79.5
106
106
106
79.5
106
106
79.5
106
106
79.5
106
95
106
12
16
16
16
12
16
16
12
16
16
12
16
14
16
355
355
355
355
355
355
355
355
355
355
355
355
400
400
36
36
36
36
36
36
36
36
36
36
36
36
45
45
713
713
713
713
713
713
713
713
713
713
713
713
805
805
920
892
920
892
920
920
892
920
920
892
920
920
1003
1003
28
28
28
28
28
28
28
28
28
28
28
28
35
35
1310
1380
1380
1380
1370
1440
1440
1450
1520
1520
1590
1660
1786
1826
397
467
467
467
397
467
467
397
467
467
397
467
438
478
Tolerances:
A,B
D
F
H
ISO js 14
ISO m6
ISO h9
0, -1.0
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
161
Dimension drawings
M000107
Motor size
Poles
AC
DB
EG
GA
GD
HB
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
716
716
716
716
716
716
716
716
716
716
716
716
810
810
75
100
100
100
75
100
100
75
100
100
75
100
90
100
M20
M24
M24
M24
M20
M24
M24
M20
M24
M24
M20
M24
M24
M24
140
210
210
210
140
210
210
140
210
210
140
210
170
210
40
48
48
48
40
48
48
40
48
48
40
48
48
48
20
28
28
28
20
28
28
20
28
28
20
28
25
28
67.5
90
90
90
67.5
90
90
67.5
90
90
67.5
90
81
90
79.5
106
106
106
79.5
106
106
79.5
106
106
79.5
106
95
106
12
16
16
16
12
16
16
12
16
16
12
16
14
16
565
537
565
537
565
565
537
565
565
537
565
565
565
565
Motor size
Poles
LA
LB
LD
355 S_
355 SA
355 SB,SC
355 SB,SC
355 M_
355 M_
355 M_
355 L_
355 L_
355 L_
355 LK_
355 LK_
400 LK_
400 LK_
2
4-8
4
6-8
2
4
6-8
2
4
6-8
2
4-8
2
4-8
1310
1380
1380
1380
1370
1440
1440
1450
1520
1520
1590
1660
1786
1826
25
25
25
25
25
25
25
25
25
25
25
25
28
28
1170
1170
1170
1170
1230
1230
1230
1310
1310
1310
1450
1450
1616
1616
395
465
465
465
395
465
465
395
465
465
395
465
438
478
740
740
740
740
740
740
740
740
740
740
740
740
940
940
680
680
680
680
680
680
680
680
680
680
680
680
880
880
800
800
800
800
800
800
800
800
800
800
800
800
1000
1000
23
23
23
23
23
23
23
23
23
23
23
23
28
28
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Tolerances:
D
F
N
162
ISO m6
ISO h9
ISO js6
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
122/5
142/6
162/7, 162/10
162/4, 162/9 +
adapter
122/4
142/4
Motor size
A1
B1
H1
M000080
280
455
280
177
142/4
315 - 355
536
349
197
162/4, 162/9 +
Adapter
315 - 400
787
410
226
280
383
280
180
142/6
315 - 355
426
347
201
162/7, 162/10
315 - 400
508
412
226
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
M000109
Rating plate
163
315
355
400
Stator
Material
Paint colour shade
Paint thickness
Material
Paint colour shade
Paint thickness
Bearings
D-end
2-pole
4-12 poles
6316/C4
6319/C3
6316/C4
6319/C4
on request
6322/C3
on request
6322/C3
N-end
2-pole
4-12 poles
6316/C4
6316/C3
6316/C4
6316/C3
on request
6319/C3
on request
6319/C3
Axially-locked bearings
280
Bearing seal
Lubrication
Rating plate
SPM-nipples
On request
Terminal box
Frame material
Cover material
Cover screw material
Connections
Cable
Terminals
2 x M63
2 x 50/80
2 x 80
2 x M63
2 x 60
2 x 60/80
6 terminals for connection with cable lugs (not included)
Fan
Material
Siluminium
Fan cover
Material
Paint colour shade
Paint thickness
Sheet steel
Blue, Munsell 8B 4.5/3.25 / NCS 4822-B05G / RAL 5014
Two-pack epoxypolyester paint, thickness t 80 Pm
Stator winding
Material
Insulation
Copper
Insulation class F; temperature rise class B unless otherwise stated.
Winding protection
Material
Rotor winding
2 - 4 pole
6 pole
Balancing method
Key way
Heating elements
On request
50 W
2x50 W
Drain holes
Enclosure
IP 23S
Cooling method
IC 01
164
2x65 W
2x65 W
ABB LV Motors / Low Voltage General Purpose Motors / Open drip proof EN 12-2006
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
Features................................................ 166
Mechanical design.............................. 167
Ordering information........................... 175
Technical data...................................... 176
Variant codes....................................... 180
Dimension drawings........................... 184
Rating plates........................................ 185
Global motors in brief......................... 187
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
165
Global motors
Features
The global economy connects multinational companies
with engineering and production in many countries
around the world.
Once a motor is specified and put into use, production equipment, including the motors, may need to
move from one country to another, Very often the new
country will have different voltage, efficiency and safety
label requirements.
CC number
Voltage
Motors covered by EPAct must have the EPAct compliance number stamped on the rating plate. The number
for all ABB low voltage motors is CC031A.
166
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Mechanical design
Stator
Stator framework, bearing shields and feet are made
of an extra corrosion resistant aluminum alloy with low
copper content with the following exceptions:
Drain holes
Motors that will be operated in very humid or wet
environments and especially under intermittent duty
should be provided with drain holes. The appropriate
IM designation, such as IM 3031, is specified on the
basis of the method of mounting the motor.
Size 63 is supplied as standard with drain holes on Dend while sizes 71 to 280 are supplied with drain holes
both on D-end and N-end.
When mounting arrangement differs from foot mounted
IM B3, please mention variant code 066 when ordering. See variant codes 065, 066 and 076 under the
heading Drain holes.
M000015
hammered home completely. In very dusty environments both plugs should be hammered home.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
167
Terminal box
M000020
M000019
M000017
M000016
M000018
Sizes 63 to 180
The terminal box is made of aluminum alloy and is
located on top of the stator. The lower part of the box is
integrated with the stator. It is provided with 2 knockout
openings on each side. Sizes 160-180 also have a third
smaller opening. Cable glands are not included.
6
Terminal box size 160-180
Connections
The terminal block is provided with
6 terminals for connecting Cu-cable. The terminals are marked in
accordance with IEC 60034-8.
168
Connection openings
Motor
Metric
Method of
Terminal
size
Opening
cable entry
connection
bolt size
Maximum
connectable
Cu-cable
area, mm2
63
Knock-out opening
71-80
Knock-out opening
90-100
Knock-out opening
112-132 Knock-out opening
160-180 Knock-out opening
200-250 1) 2 x FL 13
280
2 x FL 21
1 x M16 x 1.5
1 x Pg 11
2 x M20 x 1.5
2 x Pg 16
2 x (M25 + M20)
2 x (M25 + M20)
2 x (2 x M40 + M16)
1 x (2 x M40 + M16)
1 x (2 x M63 + M16)
Screw terminal
M4
2.5
Screw terminal
M4
Screw terminal
Cable lug
Cable lug
Cable lug
Cable lug
M4
M5
M6
M10
M10
6
10
35
70
70
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Bearings
The motors are provided with bearings according to
the tables below.
Alternative designs:
Version with roller bearings
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6306-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6208-2Z/C3
6309-2Z/C3
6310-2Z/C3
6312/C3
6313/C3
6313/C3
6315/C3
6315/C3
6315/C3
6316/C3
63
71
80
90
100
112 2)
short
112 2)
long
132 2)
short
132 2)
long
160
180
200
225
225
250
250
280
2-pole
280
4-8 pole
short:
long:
2)
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6205-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6209-2Z/C3
6209-2Z/C3
6210/C3
6210/C3
6212/C3
6212/C3
6213/C3
6213/C3
6213/C3
90
100
160
180
200
225
250
280
2-pole
280
4-8 pole
D-end
N-end
NU 205
NU 306
NU 309 ECP
NU 310 ECP
NU 312 ECP
NU 313 ECP
NU 315 ECP
NU 315 ECP
NU 316 ECP
90
100
112 1)
short
112 1)
long
132 1)
short
132 1)
long
160
180
200
225
250
280
2-pole
280
4-8 pole
short:
long:
1)
D-end
058
N-end
059
7205 B
7306 B
7206 BE
7206 BE
7208 BE
7208 BE
7309 BE
7310 BE
7312 BE
7313 BE
7315 BE
7315 BE
7316 BE
7204 B
7205 B
7205 BE
7206 BE
7206 BE
7208 BE
7209 BE
7209 BE
7210 BE
7212 BE
7213 BE
7213 BE
7213 BE
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
169
Transport locking
Motors provided with roller bearings or angular contact
ball bearings are fitted with a transport lock to prevent
damage to the bearings, due to vibration, during
transport.
Axially-locked bearings
The table below shows which of the motors bearings are axially locked in the bearing seat. In motor
sizes 56 to 80 the locking is done by an inner bearing
circlip, in motor sizes 90 to 280 by an inner bearing
cover.
Motor
size
1)
63
71-80
90-100
112-132
160-280
Foot-mounted
motors
Flange-mounted motors
Large flange
Small flange
On request at D-end
On request at D-end
D-end 1)
D-end 1)
D-end
On request at D-end
D-end
D-end 1)
D-end
D-end
On request at D-end
On request at D-end
D-end 1)
D-end
Lubrication
The motors are delivered with bearing grease for use
at normal temperatures in dry or humid environments.
The motors are lubricated for ambient temperatures
40C and in some cases even above 40C, see table 1
next page.
Motor sizes 63-180 are provided with shielded bearings. On request, motor sizes 90 to 180 are provided
with grease nipples for regreasing, see variant code
041 under the heading Bearings and lubrications.
Motor sizes 200-280 are provided with grease nipples
for re-greasing as standard.
The lubrication interval L1, suitable for relubricated
bearings, is defined as the number of operating hours
after which 99 per cent of the bearings are adequately
lubricated.
170
Lubrication intervals and grease quantities are specified on a plate on the motor as well as in the manual
supplied with the motor.
The grease lifetime L10, suitable for permanent lubricated bearings, is defined as the number of operating hours after which 90 per cent of the bearings are
adequately lubricated. 50 per cent of the bearings
achieve two times this figure. Maximum lifetime, however, should be regarded as 40000 hours.
In case of high ambient temperatures the shaft loads
must be reduced compared to permissible loadings in
the table (see pages 172 to 175), please contact ABB.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Table 1: Grease lifetime L10 in deep groove ball bearings of type 2Z in horizontally mounted motors in continuous running
Motor
r/min
63
25 C
Basic
High
40 C
Basic
High
80 C
Basic
High
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
40000
30000
24000
40000
40000
19000
29000
24000
19000
24000
15000
40000
27000
33000
14000
71
3000
1500
40000
40000
40000
40000
40000
40000
40000
80
3000
1500
40000
40000
40000
40000
40000
40000
40000
90
3000
1500
40000
40000
40000
40000
40000
40000
100
3000
1500
40000
40000
40000
40000
33000
40000
35000
21000
112
3000
1500
40000
40000
40000
40000
40000
40000
132
3000
1500
40000
40000
40000
160
3000
1500
40000
40000
40000
3000
1500
40000
38000
38000
180
40000
40000
24000
30000
30000
40000
40000
26000
27000
22000
40000
17000
21000
23000
22000
31000
26000
40000
14000
37000
9000
40000
17000
25000
34000
38000
34000
29000
20000
20000
28000
15000
40000
40000
17000
40000
40000
27000
37000
35000
40000
10000
15000
8000
In vertically mounted motors, the grease lifetime is half the figures above.
For applications corresponding to the empty cells in the table, please contact ABB. These applications can imply reduced lifetime for bearings and winding.
Lubrication intervals
ABB follows the L1-principle in
defining lubrication interval. That
means that 99% of the motors are
sure to make the interval time. The
lubrication intervals can also be calculated according to the L10-principle, which are normally doubled
Frame Amount
size
of
grease
g
80C bearing temperature and using good quality grease with lithium
complex soap and with mineral or
PAO-oil.
3600
3000
1800
1500
r/min
r/min
r/min
r/min
Frame Amount
size
of
grease
g
3000
1800
1500
r/min
r/min
r/min
r/min
Ball bearings:
180
200
225
250
280
280
6000
4000
3000
2500
2000
-
180
200
225
250
280
280
30
40
50
60
35
70
8000
6000
5000
4000
3500
-
13500
11000
10000
9000
-
8000
16000
13000
12500
11500
-
10500
30
40
50
60
35
70
3000
2000
1500
1300
1000
-
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
4000
3000
2500
2200
1800
-
7000
5500
5000
4500
-
4000
8000
6500
6000
5700
-
5300
171
1.9 107 K P
n FR
where:
D
= diameter of pulley, mm
P
= power requirement, kW
n
= motor speed, r/min.
K
= belt tension factor, dependent on belt type and
type of duty. A common value for V-belts is
K = 2.5
FR = permissible radial force according to the tables
Bearing life
The nominal life is defined as the number of hours that
are attained or exceeded by 90% of identical bearings,
in a large test series, under certain specified conditions. 50% of the bearings attain a life of as much as 5
times this figure.
The life of bearings is dependent on various factors
such as bearing load, motor speed, operating temperature and the purity of the grease. The permissible radial
and axial loading for different motor sizes is shown in
the table on the following pages.
The table is valid for 50 Hz. For 60 Hz and/or some
other bearing life than specified in the table the values
are changed according to the table on the right.
The table values assume the occurrence of only radial
60 Hz
25,000
21,000
40,000
33,000
63,000
52,000
80,000
67,000
Ball bearings
Motor
No. of
size
poles
Length
of shaft
extension
E (mm)
63
71
80
90
1001)
23
23
30
30
40
40
50
50
50
60
60
490
490
680
680
630
930
1010
1010
1010
2280
2280
2
4
2
4
2
4
2
4
8
2
4
400
400
570
570
750
750
810
810
810
1800
1800
490
490
680
680
930
930
1010
1010
1010
2280
2280
400
400
570
570
750
750
810
810
810
1800
1800
1)
M000021
172
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Ball bearings
Roller bearings
Basic design with deep
Alternative design
Alternative design
groove ball bearings
with 63-series bearings
with roller bearings
Length
40,000 hrs
25,000 hrs
40,000 hrs
25,000 hrs
40,000 hrs
of shaft 25,000 hrs
Motor
No. of extention
size
poles E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
FX0 (N) FXmax(N) FX0 (N) FXmax(N)
FX0 (N) FXmax(N) FX0 (N) FXmax(N)
112 M
60
1800
1420
1620
1280
2160
1700
2160
1700
60
1790
1410
1590
1250
2160
1700
2160
1700
132 SA
80
3020
2360
2740
2140
4070
3180
3670
2870
132 SB
80
3020
2360
2730
2130
4060
3170
3670
2870
132 S
80
3120
2440
2790
2180
4090
3200
3830
2990
4100
3200
3780
2950
132 M
80
3080
2410
2750
2150
160 MA
110
4470
3500
4470
3500
4470
3500
4470
3500
160 M
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
160 L
110
4470
3500
4470
3500
4470
3500
4470
3500
110
4470
3500
4470
3500
4470
3500
4470
3500
180 M
110
6900
5550
6360
5110
7338
5900
7340
5900
110
7100
5710
6470
5200
7338
5900
7340
5900
Ball bearings
Roller bearings
Basic design with deep
Alternative design
with roller bearings
Length groove ball bearings
of shaft 25,000 hrs
40,000 hrs
25,000 hrs
40,000 hrs
Motor
No. of extention
size
poles E (mm) FX0 (N) FXmax(N) FX0 (N) FXmax(N) FX0 (N) FXmax(N) FX0 (N) FXmax(N)
180 L
110
7050
5670
6410
5150
7340
5900
7340
5900
200 MLB
110
4930
4060
4360
3590
9460
7790
9460
7790
110
5290
4360
4630
3810
9460
7790
9460
7790
200 MLC
110
4920
4050
4360
3590
9460
7790
9460
7790
225 SMB
140
5750
4870
5030
4260
9810
8300
9810
8300
10600 8900
225 SMC
110
5370
4510
4750
3990
10600
8900
140
5720
4840
5000
4230
9810
8300
9810
250 SMB
140
6960
5610
6150
4960
11290
9100
11290 9100
140
7620
6140
6680
5380
14330
250 SMC
140
6960
5610
6150
4960
11290
9100
8300
11290 9100
280 SMB
140
7510
6100
6590
5350
17850
280 SMC
140
7510
6100
6590
5350
17850
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
173
FAZ
174
390
485
705
930
1945
1500
2570
2570
-
-
-
4730
4730
5240
4660
-
3050
3050
3440
3440
4180
4180
5000
5000
865
1070
1420
1490
3075
1600
-
-
2770
2750
-
-
5230
5220
4950
4870
3850
-
4340
4340
5260
5260
6100
6100
465
570
820
1070
2215
1600
-
-
2770
2750
-
-
5230
5220
4950
4870
3850
-
4340
4340
5260
5260
6100
6100
720
900
1185
1225
2540
1320
2260
2260
-
-
-
4220
4220
4650
4250
-
2430
2430
2730
2730
3320
3320
4400
4400
M000023
M000022
FAZ
FAD
20,000 hours
40,000 hours
2-pole
4-pole
2-pole
4-pole
Motor
FAD
FAZ
FAD
FAZ
FAD
FAZ
FAD
FAZ
size
N
N
N
N
N
N
N
N
63
790
71
985
80
1305
90
1360
100
2805
112 M
1500
132 SA 2570
132 SB 2570
132 S
-
132 M
-
132 MA
-
160 MA 4730
160 M
4730
160 L
5240
180 M
4660
180 L
-
200 MLB 3050
200 MLC 3050
225 SMB 3440
225 SMC 3440
250 SMB 4180
250 SMC 4180
280 SMB 5000
280 SMC 5000
Mounting arrangement IM V1
Mounting arrangement IM B3
FAD
320
400
585
800
1680
1320
2260
2260
-
-
-
4220
4220
4650
4250
-
2430
2430
2730
2730
3320
3320
4400
4400
780
970
1285
1335
2760
1390
-
-
2440
2420
-
-
4640
4630
4500
4390
3050
-
3440
3440
4180
4180
5300
5300
380
470
685
915
1900
1390
2440
2420
4640
4630
4500
4390
3050
3440
3440
4180
4180
5300
5300
20,000 hours
2-pole
4-pole
40,000 hours
2-pole
4-pole
Motor
size
FAD
N
63
71
80
90
100
112 M
132 SA
132 SB
132 S
132 M
132 MA
160 MA
160 M
160 L
180 M
180 L
200 MLB
200 MLC
225 SMB
225 SMC
250 SMB
250 SMC
280 SMB
790 380
998 470
1320 685
1390 900
2855 1890
2290 2170
3550 3370
3560 3360
-
-
-
-
-
-
4940 4520
4960 4500
5520 4960
4990 4330
-
-
3600 2500
3600 2500
4140 2740
4140 2740
5020 3330
5020 3330
5950 4050
FAZ
N
FAD
N
FAZ
N
FAD
N
FAZ
N
FAD
N
FAZ
N
875
1085
1445
1525
3135
2490
-
-
3910
3910
-
-
5500
5560
5400
5390
4580
-
5230
5230
6380
6380
7380
455
555
790
1035
2155
2330
-
-
3630
3590
-
-
4960
4880
4500
4350
3120
-
3440
3440
4150
4150
5010
725
910
1200
1255
3320
2680
-
-
4160
-
4180
-
5540
5420
-
5770
5280
5280
6030
6030
7440
7440
-
310
385
565
770
2340
2510
-
-
3880
-
3850
-
4900
4680
-
4630
3530
3530
3900
3900
4610
4610
-
790
985
1310
1370
3420
2770
-
-
4320
4330
-
5520
5540
5170
-
5930
5720
-
6530
6530
8050
8050
-
370
455
655
880
2425
2590
3990
3930
4960
4900
4280
4810
3980
4400
4400
5210
5210
-
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
The product code of the motor is composed in accordance with the following example.
Motor size
A
Type designation
M3AA 112 M
Pole number
4
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
4 kW
Product code
112022-ADC
Variant codes if needed
D, E, F
A
B
C
D
E
F
Motor type
Motor size
Product code
Code for mounting
arrangement
Voltage and frequency code
Generation code
followed by variant codes
Position 7
Pole pairs
1 = 2 poles
2 = 4 poles
Position 4
Type of rotor
A = Squirrel cage rotor
Positions 8 to 10
Running number
Positions 5 and 6
IEC size
06 =
07 =
08 =
09 =
10 =
11 =
13 =
63
71
80
90
100
112
132
16 = 160
18 = 180
20 = 200
22 = 225
25 = 250
28 = 280
Position 11
(dash)
Position 12
Mounting arrangement
A = Foot-mounted motor
B = Flange-mounted motor.
Large flange with clearance holes.
Flange motors come without CC-number in
the rating plate due to American legislation.
H = Foot- and flange-mounted motor.
Large flange with clearance holes.
Must be ordered using variant code 009.
Position 13
Voltage and frequency: See tables below
Position 14
Version A,B,C, CG2... =
Generation code followed by variant codes
6
The bullets in the product code description:
Voltage and frequency code
Frame sizes
S
Frame sizes
D
63-100
200-240 VD 50 Hz
160-280
380 VD 50 Hz
380-420 VY 50 Hz
400 VD 50 Hz
440-480 VY 60 Hz
415 VD 50 Hz
D
660 VY 50 Hz
112-132
380-420 VD 50 Hz
690 VY 50 Hz
440-480 VD 60 Hz
460 VD 60 Hz
660-690 VY 50 Hz
Other voltages available on request.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
175
Motor type
Product code
kW
Speed Efficiency
Is
2820
2810
2840
2830
2860
2860
2900
2880
2920
2860
2900
2915
2935
4.2
4.5
5.5
5.7
7.1
8
7.7
7.4
10
7.5
9.9
11.0
7.4
Torque
Nm
Weight
Sound
pressure
level Lp
dB(A)
lbs
TN
Tmax of inertia kg
kgm2
TN
0.62
0.87
1.25
1.86
2.5
3.7
5.0
7.3
9.9
13.4
18.1
24.6
36
3.5
3.6
3.8
3.6
4.5
4.6
2.7
3.0
3.9
2.6
4.0
5.1
2.7
3.1
3.3
3.9
3.7
3.7
3.8
3.6
3.6
4.9
3.4
4.5
5.2
2.9
3.9
4.4
5.5
6.5
9
12
16
18
25
33
42
56
84
8.6
9.7
12
14
20
25
35
40
55
73
93
123
185
207 69
IN
Ts
Moment
400 V 50 Hz
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
20
15
M3AA 160 M
8.0
49
94
25
8.3
60
100 220 69
30
22
M3AA 180 M
7.1
71
137 302 70
40
30
7.9
97
200 441 72
50
37
M3AA 200 MLC 3GAA 201 022-CG2 2960 93.9 94.1 0.89 64
8.8
120
205 452 72
60
45
M3AA 225 SMC 3GAA 221 021-CG2 2970 94.4 94.4 0.88 78
6.9
145
260 573 74
75
55
M3AA 250 SMB 3GAA 251 021-CG2 2970 94.1 94.1 0.91 93
7.5
177
330 727 75
75
M3AA 250 SMC 3GAA 251 022-CG2 2965 94.8 95.0 0.93 124
7.7
242
345 760 75
75
M3AA 280 SMC 3GAA 281 021-CG2 2965 94.8 95.0 0.93 124
7.7
242
390 859 75
100
100
1)
2)
63 A
63 B
71 A
71B
80 A
80 C
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
Power Current
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
061 391-
061 392-
071 391-
071 392-
081 731-
081 773-
091 312-CG2
091 313-CG2
101 312-CG2
111 022-CG2
131 023-CG2
131 024-CG2
161 121-CG2
73.7
77.5
77.1
79.2
79.2
82.5
85.9
85.8
87.6
87.7
88.6
90.9
91.5
70.6
75.8
76.5
78.2
78.6
82.7
86.5
87.1
87.5
89.4
88.9
91.3
91.9
0.64
0.71
0.72
0.76
0.81
0.88
0.87
0.87
0.86
0.93
0.88
0.90
0.90
0.56
0.66
1.00
1.35
1.7
2.20
3.00
4.40
5.90
7.1
10.3
13.3
19.2
0.00013
0.00016
0.00040
0.00045
0.00072
0.00109
0.0024
0.0027
0.0005
0.012
0.016
0.022
0.047
3)
3)
3)
3)
3)
3)
3)
3)
3)
63
69
69
69
176
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Motor type
Product code
kW
1)
0.12
0.18
0.25
0.37
0.55
0.75
1
1.5
2.2
3
4
5.5
7.5
11
15
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71 B
80 A
80 C
90 L
100 LA
100 LC
100LB
112 M
132 S
132 M
160 M
160 L
Speed Efficiency
Power Current
Is
1400
1380
1410
1420
1390
1380
1420
1440
1450
1450
1455
1460
1450
1470
1460
3.1
3.1
4.3
4.4
4.6
5.6
6.1
6.9
8.5
7.6
8.5
7.0
7.8
8.1
7.6
Torque
Nm
Weight
lbs
TN
Tmax of inertia kg
kgm2
TN
0.82
1.25
1.71
2.51
3.75
5.2
7.4
10
14.5
17.2
26.3
36.2
49
72
98
2.6
2.5
2.7
2.6
2.6
4
2.9
2.8
4.0
3.3
3.3
2.2
2.2
3.4
3.3
2.6
2.6
2.9
2.8
2.9
2.6
3.4
3.4
4.6
3.8
4.3
2.8
3.1
3.3
3.1
8.8
9.9
12
14
20
24
35
46
55
55
75
106
130
207
227
IN
Ts
Moment
Sound
pressure
level Lp
dB(A)
400 V 50 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
062 391-
062 392-
072 391-
072 392-
082 391-
082 733-
092 312-CG2
102 311-CG2
102 313-CG2
102 342-CG2
112 022-CG2
132 023-CG2
132 024-CG2
162 121-CG2
162 122-CG2
63.7
65.6
70.4
74.6
75.3
82.5
83.9
85.6
86.8
85.5
88.3
89.3
90.3
91.5
91.3
58.4
62.1
69.1
72.1
73.1
83.2
84.3
85.5
86.6
85.5
88.6
90.5
91.0
92.1
92.1
0.59
0.64
0.71
0.69
0.76
0.82
0.80
0.82
0.77
0.84
0.76
0.84
0.87
0.83
0.83
0.46
0.63
0.74
1.05
1.40
1.60
2.40
3.20
4.80
5.90
8.6
10.6
14
21
28.5
0.00019
0.00026
0.00066
0.00089
0.00125
0.00194
0.0043
0.0069
0.009
0.0082
0.018
0.038
0.048
0.091
0.102
4
4.5
5.5
6.5
9.0
11
16
21
25
25
34
48
59
94
103
3)
3)
3)
3)
3)
3)
3)
3)
3)
3)
56
59
59
62
62
25
6.6
121
141 311 62
30
22
M3AA 180 L
7.8
143
161 355 62
40
30
8.0
194
205 452 63
50
37
M3AA 225 SMB 3GAA 222 021-CG2 1480 93.7 94.0 0.85 68
8.1
239
230 507 66
60
45
M3AA 225 SMC 3GAA 222 022-CG2 1480 94.4 94.8 0.86 80
8.0
291
265 584 66
55
M3AA 225 SMD 3GAA 222 023-CG2 1480 94.5 94.8 0.86 98
8.5
355
290 639 66
55
M3AA 250 SMB 3GAA 252 021-CG2 1480 94.5 94.9 0.87 96
7.4
356
335 738 67
75
M3AA 250 SMC 3GAA 252 022-CG2 1480 95.2 95.6 0.85 135
8.4
484
360 793 66
75
M3AA 280 SMB 3GAA 282 021-CG2 1480 95.2 95.6 0.85 135
8.4
484
405 892 66
75
2)
75
100
100
2)
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
177
Motor type
Product code
r/min
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
20
15
M3AA 160 M
25
18.5
M3AA 160 L
30
22
M3AA 180 M
40
30
50
37
60
75
100
100
kW
3)
63 A
63 B
71 A
71B
80 A
80 C
90 L
90 LB
100 LB
112 M
132 SA
132 SB
160 MA
Power Current
Is
Torque
Nm
Moment
Weight
of inertia
kgm2
kg
lbs
4.0
3.9
4.4
4.5
4.5
4.7
3.8
3.7
5.0
4.1
4
6
3.3
0.00013
0.00016
0.00040
0.00045
0.00072
0.00109
0.0024
0.0027
0.0005
0.012
0.016
0.022
0.047
3.9
4.4
5.5
6.5
9
11
16
18
25
33
42
56
84
8.6
9.7
12
14
20
24
35
40
55
73
93
123
185
207
Ts
Tmax
TN
TN
0.5
0.7
1.0
1.5
2.06
3.04
4.1
6.0
8.0
11
15
20.7
30
4.0
3.9
4.2
4.2
4.9
4.8
2.8
3.2
3.9
2.6
3.3
4.5
2.8
IN
460 V 60 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
061 391-
061 392-
071 391-
071 392-
081 731-
081 773-
091 312-CG2
091 313-CG2
101 312-CG2
111 022-CG2
131 023-CG2
131 024-CG2
161 121-CG2
3400
3400
3450
3450
3480
3460
3535
3530
3560
3475
3500
3465
3545
75.5
82.5
86.5
87.5
88.0
87.5
88.5
89.5
90.2
70.1
76.4
76.5
79.8
80.6
83.5
87.5
87.9
88.0
87.8
87.8
90.8
91.9
90.2
40
3.2
3.7
0.053
94
91
50
2.8
3.5
0.058
100 220
91
59
2.6
0.092
137 302
91.7
81
3.2
3.2
0.18
200 441
92.4
9.7
99
3.7
3.6
0.19
205 452
45
93
7.9
121
2.5
3.2
0.29
260 573
55
93
8.7
147
2.7
3.2
0.57
330 727
75
93.6
9.9
201
2.4
3.1
0.59
345 760
75
93.6
9.9
201
2.4
3.1
0.6
390 859
2)
2)
2)
2)
67.5
75.3
74.5
78.6
79.2
83.1
86.5
87.5
88.0
88.3
86.9
90.6
91.4
0.60
0.70
0.70
0.75
0.81
0.85
0.85
0.85
0.85
0.93
0.88
0.92
0.90
0.5
0.6
0.9
1.2
1.45
2.0
2.6
3.7
5.1
6.1
8.7
11.5
16.8
4.6
5.4
6.6
7.1
8.4
9.5
8.1
7.5
11.0
9.0
9.4
14.5
8.6
2)
178
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Motor type
Product code
kW
r/min
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
25
30
22
M3AA 180 L
40
50
60
75
3)
75
100
100
3)
M3VA
M3VA
M3VA
M3VA
M3VA
M3VA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
M3AA
63 A
63 B
71 A
71 B
80 A
80 C
90 L
100 LA
100 LC
100LB
112 M
132 S
132 M
160 M
160 L
Power Current
Is
Torque
Nm
Moment
Weight
of inertia
kgm2
kg
lbs
2.7
2.6
3.1
3.2
3.0
3.1
3.8
4.0
4.8
3.7
4.6
3.5
3.6
3.7
3.6
0.00019
0.00026
0.00066
0.00089
0.00125
0.00185
0.0043
0.0069
0.009
0.0082
0.018
0.038
0.048
0.091
0.102
4
4.5
5.5
6.5
9.0
11
16
21
25
25
34
48
59
94
103
8.8
9.9
12
14
20
24
35
46
55
55
75
106
130
207
227
Ts
Tmax
TN
TN
0.7
1.0
1.4
2.1
3.1
4.14
6.1
8.2
11.9
16.5
21.8
30
41
59
81
2.6
2.5
3.1
3.2
3.0
4.1
3.0
3.0
4.1
3.1
3.9
2.7
3.5
3.5
3.5
IN
460 V 60 Hz
3GVA
3GVA
3GVA
3GVA
3GVA
3GVA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
3GAA
062 391-
062 392-
072 391-
072 392-
082 391-
082 733-
092 312-CG2
102 311-CG2
102 313-CG2
102 342-CG2
112 022-CG2
132 023-CG2
132 024-CG2
162 121-CG2
162 122-CG2
1680
1680
1700
1700
1700
1730
1750
1765
1770
1740
1775
1760
1765
1775
1770
82.5
84.0
86.5
87.5
87.5
87.5
89.5
89.5
91.0
91.0
58.8
62.8
66.7
70.6
73.3
82.5
85.5
87.2
87.5
87.5
88.0
89.7
90.5
92.5
92.4
92.4
100
3.1
0.191
141 311
92.4
9.1
118
3.4
3.8
0.225
161 355
30
93.0
161
4.1
3.4
0.34
205 452
37
93.0
9.1
198
3.9
3.3
0.42
230 507
45
93.6
9.1
241
3.9
3.5
0.49
265 584
55
94.1
9.9
295
4.5
3.7
0.56
290 639
55
94.1
8.5
295
3.2
3.4
0.88
335 738
75
94.5
9.8
402
3.2
3.4
0.95
360 793
75
94.5
9.8
402
3.2
3.4
0.95
405 892
2)
2)
2)
2)
2)
54.5
59.5
63.9
68.3
71.6
82.1
84.0
86.0
87.5
87.5
87.4
89.9
90.9
92.4
92.5
0.55
0.57
0.68
0.69
0.74
0.78
0.78
0.79
0.75
0.82
0.80
0.83
0.85
0.81
0.83
0.5
0.6
0.7
0.9
1.3
1.5
2.1
2.8
4.2
5.4
7.1
9.3
12.4
18.4
24.5
2.8
2.9
4.3
4.5
5.1
6.6
7.1
7.5
9.0
7.6
10.4
8.9
9.7
8.9
8.8
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
179
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
Balancing
052
417
NA
NA
423
424
NA
NA
NA
037
NA
NA
NA
NA
039
NA
040
041
NA
NA
NA
042
NA
043
SPM nipples.
NA
NA
057
NA
NA
NA
NA
058
059
188
63-series bearings.
NA
NA
796
NA
NA
NA
797
NA
NA
NA
798
NA
NA
NA
142
NA
NA
178
209
NA
NA
425
NA
NA
Coupling
035
Dimension drawing
141
Drain holes
065
Earthing bolt
067
1)
180
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Code
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
Heating elements
Motor size
63-71
80-160
180-280
Element capacity
8W
25 W
50 W
450
NA
451
NA
Mounting arrangements
NOTE: Multiple flange sizes available using two-piece flange system,
see page 48.
007
IM 3001 flange mounted, IEC flange, from IM 1001 (B5 from B3).
NA
NA
NA
NA
NA
008
NA
NA
NA
009
NA
066
Painting
114
179
Protection
005
072
NA
NA
NA
158
NA
211
Weather protected, IP xx W.
NA
NA
NA
403
NA
784
Gamma-seal at D-end.
NA
NA
NA
138
139
163
NA
NA
NA
070
165
011
NA
NA
NA
029
NA
NA
408
NA
1)
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
181
Code
Variant
1)
Motor size
63
7180
90100
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
112132
160180
200250
280
435
436
437
439
440
441
442
445
NA
NA
NA
446
NA
NA
NA
NA
Terminal box
015
017
021
NA
NA
NA
180
NA
NA
NA
230
731
1)
182
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Code
Variant
1)
Motor size
63
7180
90100
112132
160180
200250
280
Testing
140
Test confirmation.
145
146
Type test with report for motor from specific delivery batch.
147
Type test report with motor from spec. del. batch, customer
witnessed.
148
149
NA
NA
221
Type test and multi-point load test with report for motor from
specific delivery batch.
Torque/speed curve, type test and multi-point load test with
report for motor from spec del batch.
222
760
762
1)
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
183
Global motors
Sizes 63-280
Dimension drawings
HD D
Motor
size
63
71
80
90
100
112
132 S, SA
132 SB, M
160
180 M
180 L
200
225 SMB,SMC
225 SMD
250 SMB
250 SMC
280
M000272
45
IM 3601, IM B14
Tolerances:
Motor
size
M
N
P
63
71
80
90
100
112
132
M5
M6
M6
M8
M8
M8
M10
75
85
100
115
130
130
165
GA
K
B
B
F PN
45
H
E
M000271
M000269
M000268
M000267
M000270
60
70
80
95
110
130
165
90
105
120
140
160
160
200
A, B
D, DA
F, FA
H
N
C, CA
0,8
ISO k6 < 50mm
ISO m6 > 50mm
ISO h9
-0,5
ISO j6
0.8
184
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
Rating plates
The applicable Global motor standards provide the
following minimum requirements for markings to be
shown on the rating plate.
M000118
M000119
M000117
M000025
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
M000121
M000120
185
drive applications.
186
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
63
71
80
90
100
112
132
Stator
Material
Paint colour shade
Paint
Feet
Material
Paint colour shade Munsell blue 8B 4.5/3.25 / NCS 4822-B05G / RAL 5014
Paint
Epoxy polyester powder paint, Polyester powder paint,
30 m. 30 m.
Bearings
D-end
N-end
Axially-locked
Inner bearing cover Spring washer at N-end.
D-end
bearings
112-132: Foot-mounted - a spring washer at N-end presses the rotor against D-end.
Flange-mounted - inner bearing cover and spring-washer at N-end.
Bearing seals
D-end
N-end
V-ring.
Labyrinth seal.
Lubrication
Permanent grease lubrication.
Grease for bearing temperatures -30 to +110C.
Terminal box
Material
Surface treatment
Screws
Connections
Terminal box
Screw terminal, 6 terminals.
Screws
4
6
Max Cu-area, mm2 2,5
Fan
Material
Fan cover
Material
Steel.
Stator winding
Material
Impregnation
Insulation class
Winding protection
Copper
Polyester vanish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Optional.
Rotor winding
Material
Die-cast aluminum.
4 x M25
2 x (M25 + M20)
Cable lugs, 6 terminals.
M5
10
Polypropylene.
Balancing method
Key ways
Heating elements
25 W
Drain holes
Enclosure
IP 55
Cooling method
IC 411
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
187
160
180
Stator Material
Feet
Material
Aluminum alloy,
integrated with stator.
Die-cast
Flanged bearing end shields of cast iron,
Cast iron
aluminum alloy. other die-cast aluminum alloy
Munsell blue 8B 4.5/3.25 / NCS 4822-B05G / RAL 5014
Polyester powder paint, 50 m.
Bearings
D-end
Single-speed motors N-end
6309-2Z/C3
6310-2Z/C3
6312/C3
6313/C3
6315/C3
6316/C3 1)
6209-2Z/C3
6209-2Z/C3
6210/C3
6212/C3
6213/C3
6213/C3
1)
6315/C3 for 2-pole motor
Axially-locked
bearings
Bearing seals
D-end
N-end
V-ring.
Labyrinth seal.
225
250
280
Cast iron
Lubrication
Terminal box
Material
Surface treatment
Screws
Connections
Knock-out openings 2 x (2 x M40 + M16)
Flange-openings
Cable lugs, 6 terminals.
Screws
M6
Max Cu-area, mm2 35
Fan
200
Material
2 x FL 13.2 x M40
2 x FL 21.2 x M63 voltage code S
M10
70
Fan cover
Material
Steel sheet.
Phosphated. Polyester paint.
Stator winding
Material
Impregnation
Insulation class
Winding protection
Copper
Polyester vanish. Tropicalised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Optional.
PTC-thermistors, 150C
Rotor winding
Material
Die-cast aluminum.
Balancing method
Key way
Heating elements
25 W
Drain holes
Enclosure
IP 55
Cooling method
IC 411
188
2 x FL21, 2 x
M63,1 x M16
50 W
ABB LV Motors /Cat. BU / Low Voltage General Purpose Motors / Global Motors EN 12-2006
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
Mechanical design ................................190
Ordering information.............................197
Technical data........................................198
Variant codes .........................................210
Rating plates..........................................210
Dimension drawings..............................211
Brake motors in brief ............................213
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
189
Mechanical design
Degrees of protection
The degrees of protection, as per IEC standards
60034-5, are: terminal box and electrical components
of the brake IP 55; other motor parts IP 55.
Operation
ABBs brake motor is a standard motor modified for
braking duties, i.e. a three phase induction motor with
standard dimensions and output rating.
190
Motor size
M3VRF/S 63 A, B, BB
71
80
M3ARF/S 90
100
112
132
160
180
D-end
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6306-2Z/C3
6206-2Z/C3
6208-2Z/C3
6309-2Z/C3
6310-2Z/C3
N-end
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
6206-2Z/C3
6206-2Z/C3
6208-2Z/C3
6209-2Z/C3
6209-2Z/C3
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Brake design
General
Detailed view
1
2
3
4
5
6
7
8
9
10
11
12
13
10
11
12
13
M000123
M000124
Brake disc
The brake lining is made from asbestos-free material.
It is highly resistant to wear and has excellent thermal
conductivity, thus giving consistent performance even
at high temperatures.
The brake disc withstands a large number of braking
operations and is insensitive to dust and moisture.
10
M000125
The brakes are supplied with the air gap adjusted to its
nominal value.
Air gap
191
Rectifier
Reconnection (t21=)
M000127
M000128
M000126
Reconnection (t21a)
When it is necessary to reduce the braking time, the
connections should be modified according to the
following diagram. The breaking of the circuit on the
AC side is controlled by using an auxiliary contact of
the contactor.
Connection of AC brake
The coil should only be used between 90% - 110% of
its rated voltage.
Reconnection (t21f)
Remark:
Regardless of whether a DC or AC brake is used, the brake is usually connected to the motor terminals of singlespeed motors. It can, however, also be delivered with a separate brake supply (variant code 086). In case of twospeed motors, the brake is always connected separately.
Separate brake connection is compulsory when the motor is driven by a frequency converter.
192
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Size
FM 075.5
FM 088.6
FM 100.6
FM 120.6
FM 140.6
FM 155.6
FM 170.6
FM 206.6
1
1
1
1
1.5
1.5
1.5
1.5
M000130
Hand release
M000131
Torque adjustment
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
193
t21
= Braking time.
M000132
U2 = Rated voltage.
TB
194
Rectifier input
voltage (V AC)
110
220
230
240
250
254
380
400
415
420
440
500
24 V DC
Rectifier type
1)
F.W.
F.W.
F.W.
F.W.
F.W.
F.W.
H.W.
H.W
H.W
H.W.
H.W.
H.W.
None
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
63
A/B
71
80
90
100
112
132
160/180
2p
Brake type
75.5
88.6
100.6
120.6
140.6
155.6
170.6
206.6
TBnom (Nm)
7.5
10
24
35
44
86
130
200
230
TBdel (Nm)
21
30
38
72
120
130
200
X (mm)
0.2
0.2
0.25
0.35
0.4
0.4
0.4
0.4
Minimum permissible
brake disc thickness
(mm)
3.5
3.5
5.5
7.5
8.5
Xn (mm)
0.5
0.5
0.6
0.7
0.8
0.8
0.8
0.9
Thickness of new
brake disc
Em (mm)
5.5
7.5
8.5
9.5
9.5
11
13
Cs (Nm)
12
12
30
30
30
50
Input coil:
- AC brake motor
- DC brake motor
(VA)
(W)
60
30
110
32
160
45
250
72
500
91
700
100
990
120
2000
170
Friction work
per operation
WRmax (J)
1x103
1.5x103
2x103
3.5x103
6.6x103
8x103
1.1x104
2x104
Friction work
PRmax (J/h)
3x105
3.5x105
4.5x105
7x105
9x105
9.5x105
1x106
1.2x106
WR0.1 (J)
7x106
10x106
15x106
17x106
31x106
31.5x106
48x106
80x106
Moment of inertia
J (kgm2)
1.5x10-5
3.7x10-5
7.5x10-5
2x10-4
3.7x10-4
6.2x10-4
10.4x10-4
26.4x10-4
Weight
(kg)
0.8
1.6
2.7
5.2
16.2
Rated torque 1)
Delivered torque
1)
2)
4-8 p
2)
Delivered torque : Torque value marked on rating plate corresponding to the braking torque
when the brake motor leaves the ABB factory. Tolerance of +/-10% of this value is accepted.
Ambient conditions, temperature on friction surfaces, brake motor positioning and transport
applied on the product can affect this value.
In general, all the variables mentioned above can affect the braking torque values, so if an accurate value is needed, ABB recommends it is
measured in the real application. This allows adjustment to the required value by using the torque regulation facility.
Table 2.
63
A/B
71
80
90
100
112
132
160/180
Brake type
75.5
88.6
100.6
120.6
140.6
155.6
170.6
206.6
AC brake coil
- release time
t1 (ms)
6.6
5.1
5.5
5.5
t21 (ms)
25
25
30
40
50
50
65
105
t21f (ms)
10
10
10
10
10
10
10
10
- release time
t1 (ms)
20
20
25
35
40
50
60
100
t21 (ms)
150
170
210
330
420
720
850
930
- reconnection time
t21 (ms)
30
35
45
70
90
155
190
150
DC brake coil
When fast braking in AC brake is used, the contactor that is operating the coil of the brake
has to be over dimensioned taking in consideration a high inductive load.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
195
Calculations
Maximum number of connections per hour
n
>@
n
b
1
2
x J S x nm
30
>
in joules
WR x c/h
Braking time
The total braking time from the disconnecting of brake
until the machine is stopped is calculated as follows:
t=
104.6 x
J x nm
+ t21
TB
J=
WR =
Required data:
Type of brake motor
Load inertia reduced at motor shaft
Required power P2
Type of service
WR0.1
WR
Xn - X
0.1
x L0.1
Options
Separate brake supply
Dust protection
To protect the brake disc against dust, the brake can
be supplied with a rubber protection ring and V-ring.
Protective roof
To protect motors from accumulation of water, ice or
snow when installed outdoors in the vertical position
and with the shaft downwards, the assembly should be
fitted with a protective roof.
Variant code 005 should in this case be stated in the
order.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Ordering information
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
M3ARF 112M
Pole number
4
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
4 kW
Product code
3GAR112401-ADE
Variant codes if needed
Brake information
A
B
M3ARF 112 M
A
C
D,E,F, G
3GAR 112 401 - ADE, 088 etc.
1-4
5-6 7
8 - 10
11 12 13 14
B
C
Motor type
M3VRF/M3ARF (DC brake)
M3VRS/M3ARS (AC brake)
Motor size
Product code
D Mounting arrangement code
E Voltage/frequency code
F Generation code
Variant code
12
13
16
18
= 112
= 132
= 160
= 180
6
7
8
9
=
=
=
=
12 poles
> 12 poles
Two-speed motors
Multi-speed motors
Mounting arrangement
A = Foot-mounted.
B = Flange-mounted. Large aluminum flange with
clearance holes, sizes 63-100 and 180.
C = Flange-mounted. Small aluminum flange with
tapped holes, sizes 63-100.
E = Flange-mounted. Large cast iron flange with
clearance holes, sizes 112-160.
H = Foot- and flange-mounted. Large aluminum flange
with clearance holes, sizes 63-100 and 180.
J = Foot- and flange-mounted. Small aluminum flange
with tapped holes, sizes 63-100.
K = Foot- and flange-mounted. Large cast iron flange
with clearance holes, sizes 112-160.
N = Flange mounted. Two piece cast iron flange (IEC-1)
with clearance holes, sizes 90-132.
P = Foot- and flange-mounted. Two piece cast iron
flange (IEC) with clearance holes, sizes 90-132.
Position 13
Voltage and frequency code
See table below
Position 8 to 10
Serial number
Position 14
Generation code = C (size 63), E (sizes 71-180)
Position 11
- (dash)
Position 12
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
197
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
TS/
TN
K1)
100% 75%
Current
IN
A
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
061 401-C
061 402-C
071 401-E
071 402-E
081 401-E
081 402-E
091 401-E
091 402-E
101 401-E
111 401-E
131 401-E
131 402-E
161 411-E
161 412-E
161 413-E
181 411-E
2820
2810
2840
2830
2870
2850
2870
2880
2900
2850
2855
2860
2915
2900
2915
2925
0.62
0.87
1.25
1.86
2.49
3.69
5
7.5
10
13.4
18.4
25.1
36
49
60
72
7.5
7.5
10
10
24
24
35
35
44
86
130
130
200
200
200
200
3.5
3.6
3.8
3.6
2.9
2.3
2.4
2.7
2.7
2.8
3.2
3.4
2.1
2.3
2.5
3.0
12.5
8.33
7.6
5.26
9.6
6.48
7
4.7
4.4
6.41
7.06
5.17
5.55
4.1
3.3
2.8
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
Basic design
73.7
77.5
77.1
79.2
81.2
81.4
80.1
83.6
86.0
86.0
86.0
88.0
88.4
89.4
90.4
91.5
70.6
75.8
76.5
78.2
79.3
79.5
76.2
83.9
84.1
86.2
86.6
86.2
88.0
89.7
90.7
91.7
0.64
0.71
0.72
0.76
0.75
0.78
0.82
0.87
0.88
0.91
0.88
0.89
0.88
0.90
0.91
0.89
0.56
0.66
1
1.35
1.8
2.5
3.35
4.37
5.95
7.4
10.5
13.9
20.5
27
32.5
39
4.2
4.5
5.5
5.7
6.2
6.1
5.5
7.0
7.5
7.5
7.8
8.5
6.1
6.0
6.7
8.0
400 V 50 Hz
3500
3500
2600
2600
2000
2000
1300
1200
1000
500
600
500
200
200
200
120
0.00023
0.00026
0.00051
0.0006
0.00074
0.00078
0.0021
0.0026
0.00453
0.01078
0.01657
0.01857
0.05096
0.05596
0.06396
0.06264
4.9
5.4
7
8
11
12
19
22
32
38
57
62
124
134
139
158
High-output design
0.37
M3VRF 63 BB
2.3
5.76 73.6
73.1
0.81
0.9
3.5
3500 0.00027
5.9
0.68
M3VRF 71 BB
3.2
4.34 78.9
77.4
0.82
1.59
5.2
2400 0.0006
0.75
M3VRF 71 BC
3.1
3.84 78.5
77.9
0.85
1.7
5.1
2400 0.0006
1.5
TB
Nm
Power
factor
cos M
M3VRF 80 C
2.8
4.7
82.4
82.2
0.83
3.16
5.5
1800 0.00111
13
2.7
3)
M3ARF 90 LB
35
2.6
3.88 80.7
83.5
0.86
5.7
7.0
1200 0.0029
24
3)
M3ARF 100 LB
44
2.7
3.38 85.0
84.3
0.86
8.1
7.5
1000 0.00543
36
5.5
3)
M3ARF 112 MB
2.7
4.67 86.5
87.1
0.93
9.9
7.3
500
0.01273
66
9.2
3)
3.2
4.18 86.0
88.2
0.93
16.6
7.3
500
0.02457
77
11
3)
M3ARF 132 SC
130
3.2
3.51 87.0
87.4
0.93
19.6
8.0
500
0.02383
77
22
3)
M3ARF 160 LB
200
2.6
2.77 92.1
93.0
0.91
38
7.1
200
0.06896
145
1)
Braking-torque ratio
2)
3)
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectifier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V'
380-420 VY
250-280 V'
380-420 V'
660-690 VY
440-480 V'
160-180
230 V'
400 VY
265 V'
400 V'
690 VY
460 V'
Motor
size
E
Motor
Motor
size
50 Hz
Brake
(input rectifier
voltage/brake voltage)
63-80
90-180
500 V'
198
F
Motor
Brake
(input rectifier
voltage/brake voltage)
50 Hz
Brake
(input rectifier
voltage/brake voltage)
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
M3VRF 63 A
M3VRF 63 B
M3VRF 71 A
M3VRF 71 B
M3VRF 80 A
M3VRF 80 B
M3ARF 90 S
M3ARF 90 L
M3ARF 100 LA
M3ARF 100 LB
M3ARF 112 M
M3ARF 132 S
M3ARF 132 M
M3ARF 160 M
M3ARF 160 L
M3ARF 180 M
M3ARF 180 L
TB
Nm
TS/
TN
K1)
100% 75%
Power
factor
cos M
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
062 401-C
062 402-C
072 401-E
072 402-E
082 401-E
082 402-E
092 401-E
092 402-E
102 401-E
102 402-E
112 401-E
132 401-E
132 402-E
162 411-E
162 412-E
182 411-E
182 412-E
1400
1380
1410
1420
1390
1410
1410
1420
1430
1430
1435
1450
1450
1465
1460
1455
1460
0.82
1.25
1.71
2.51
3.75
5.08
7.5
10
15
20
26.6
36.2
49.4
72
98
121
144
7.5
7.5
10
10
24
24
35
35
44
44
86
130
130
230
230
230
230
2.6
2.5
2.7
2.6
2.6
3.5
2.2
2.4
2.4
2.5
2.9
2.2
2.5
2.4
2.8
2.6
3
Current
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
0.00029
0.00036
0.00081
0.00104
0.00128
0.00159
0.0034
0.0045
0.00733
0.00863
0.01578
0.03357
0.04057
0.07696
0.08796
0.10464
0.12964
5
5.5
7
8
11
12
19
22
32
35
40
60
68
117
129
161
175
Basic design
9.37
5.76
5.88
4
6.31
4.7
4.66
3.5
2.93
2.2
3.23
3.59
2.63
3.2
2.3
1.9
1.6
63.7
65.6
70.4
74.6
75.3
78.2
77.5
80.3
83
85
84.5
87
88
88.4
90
90.4
91.1
58.4
62.1
69.1
72.1
73.1
75.6
76.4
78.1
82.7
83.9
83.9
87.7
88.6
88.8
90.5
90.4
91.5
0.59
0.64
0.71
0.69
0.76
0.74
0.81
0.79
0.81
0.81
0.80
0.83
0.83
0.78
0.82
0.84
0.82
0.46
0.63
0.74
1.05
1.4
1.9
2.59
3.45
4.8
6.48
8.6
11.1
14.8
22.5
29
35
42
67.4
75.3
0.67
0.76
0.78
1.15
400 V 50 Hz
3.1
3.1
4.3
4.4
4.6
4.7
5.0
5.0
5.5
5.5
7.0
7.3
7.9
6.9
7.2
7.0
8.0
7100
7100
6500
6500
5000
5000
3200
3200
2700
2700
2500
1800
1400
500
500
360
360
High-output design
0.25
0.45
M3VRF 63 BB
M3VRF 71 BB
2.5
2.1
4.16 70.3
3.22 75.5
0.55
M3VRF 71 C
2.7
2.7
77.3
76.9
0.73
1.45
0.95
M3VRF 80 C
2.9
3.75 78.9
77.9
0.75
2.35
1.85
M3ARF 90 L
35
2.2
2.69 79.5
78.1
0.80
4.4
4.5
3200 0.0045
22
2.2
M3ARF 90 LB
35
2.2
2.33 80.3
81.0
0.83
4.85
4.5
3200 0.0048
23
M3ARF 100 LC
44
2.5
1.62 81
81.7
0.82
8.65
5.5
2700 0.009
36
5.5
M3ARF 112 MB
2.8
2.33 84.5
83.5
0.83
11.4
7.1
2500 0.018
47
83
3.2
4.1
7100 0.0004
6500 0.00104
6
8
4.8
6500 0.00125
4.3
500
13
0.00197
9.2
130
2.14 88
88.6
0.85
17.8
7.3
1400 0.05
11
M3ARF 132 MB
130
2.5
1.79 88
89.4
0.86
21
8.3
500
0.05
83
18.5
M3ARF 160 LB
230
2.9
1.88 90.5
88.9
0.84
36
6.9
500
0.107
143
1)
2)
3)
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering information page.
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectifier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V'
380-420 VY
250-280 V'
380-420 V'
660-690 VY
440-480 V'
160-180
230 V'
400 VY
265 V'
400 V'
690 VY
460 V'
Motor
size
E
Motor
Motor
size
50 Hz
Brake
(input rectifier
voltage/brake voltage)
63-80
90-180
500 V'
F
Motor
Brake
(input rectifier
voltage/brake voltage)
50 Hz
Brake
(input rectifier
voltage/brake voltage)
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
199
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 S
132 MA
132 MB
160 M
160 L
TS/
TN
K1)
100% 75%
7.89
5.9
5.31
3.84
6.28
4.22
4.66
3.18
2.93
3.85
4.36
3.27
2.36
3.14
2.13
47.1
56.0
61.1
64.9
72.9
73.3
71.5
74.4
80.0
80.5
84.5
85.5
86.0
89.3
89.8
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
063 401-C
063 402-C
073 401-E
073 402-E
083 401-E
083 402-E
093 401-E
093 402-E
103 401-E
113 401-E
133 401-E
133 402-E
133 403-E
163 401-E
163 402-E
910
860
920
920
925
925
930
930
950
940
960
960
955
970
970
0.95
1.27
1.88
2.61
3.82
5.68
7.5
11
15
22.3
29.8
39.7
55
74
109
7.5
7.5
10
10
24
24
35
35
44
86
130
130
130
230
230
2.1
1.8
2.1
2.5
3.1
2.9
1.9
2.1
1.9
2.1
2.0
2.0
2.2
2.0
2.2
Current
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
0.0003
0.00037
0.00078
0.00096
0.00186
0.0022
0.0034
0.0045
0.0086
0.015
0.033
0.04
0.047
0.087
0.127
5
5.5
7
8
11
12
19
22
34
40
59
66
74
129
149
Basic design
42.5
53.5
57.7
62.3
70.8
71.9
70.7
72.5
77.0
79.3
82.7
83.1
85.0
88.4
88.5
0.56
0.55
0.69
0.65
0.72
0.71
0.67
0.69
0.71
0.74
0.75
0.78
0.78
0.79
0.78
0.51
0.56
0.64
0.86
1.04
1.55
2.36
3.25
3.92
5.4
6.9
8.7
11.9
15.4
23
2.1
2.4
2.9
3.2
3.8
3.4
4.0
4.0
4.5
5.6
6.1
7.1
6.9
6.7
7.1
7700
7700
7500
7500
7000
7000
3800
3900
3300
3200
2400
1900
1900
600
600
400 V 50 Hz
0.15
M3VRF 63 BB
1.61 7.5
2.2
4.68 56.9
52.1
0.54
0.74
2.2
7700 0.00042
0.32
M3VRF 71 C
3.33 10
2.6
3.1
64.8
61.6
0.63
1.15
3.2
7500 0.00125
High-output design
9
1.3
3)
M3ARF 90 LB
13.5 35
1.9
2.59 69.0
69.0
0.71
3.85
4.0
3800 0.005
24
2.2
3)
M3ARF 100 LC
22
1.9
72.8
0.71
5.9
4.5
3300 0.009
37
3)
30.6 86
2.0
2.81 80.0
79.9
0.76
7.2
5.5
3200 0.018
46
6.5
3)
64
130
2.0
2.01 85.0
84.5
0.75
14.8
6.6
2400 0.051
79
14
3)
M3ARF 160 LB
139
230
2.7
1.65 89.1
84.5
0.77
29.5
7.6
1900 0.147
164
1)
2)
3)
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
M3ARF
TB
Nm
Power
factor
cos M
44
77.0
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectifier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V'
380-420 VY
250-280 V'
380-420 V'
660-690 VY
440-480 V'
160-180
230 V'
400 VY
265 V'
400 V'
690 VY
460 V'
Motor
size
E
Motor
Motor
size
50 Hz
Brake
(input rectifier
voltage/brake voltage)
63-80
90-180
500 V'
200
F
Motor
Brake
(input rectifier
voltage/brake voltage)
50 Hz
Brake
(input rectifier
voltage/brake voltage)
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
680
690
690
700
700
700
M3VRF
M3VRF
M3VRF
M3VRF
M3VRF
M3ARF
63 B
71 A
71 B
80 A
80 B
90 S
0.55
M3ARF 90 L
0.75
M3ARF 100 LA
1.1
TB
Nm
TS/
TN
K1)
100% 75%
Power
factor
cos M
400 V 50 Hz
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
0.00037
0.00078
0.00096
0.0022
0.00245
0.0032
5.5
7
8
11
12
19
Basic design
0.78
1.25
1.67
2.46
3.52
5
7.5
10
10
24
24
35
2.1
2.3
2.5
3.2
2.9
1.9
9.4
7.69
5.88
9.6
6.85
7
38.3
45.8
46.4
59.9
70.7
61.5
31.8
37.5
38.1
54.5
67.4
43.4
0.48
0.57
0.55
0.60
0.62
0.56
0.45
0.52
0.69
0.75
0.85
1.6
1.8
2.2
2.2
3.1
3.1
3.0
7700
7500
7500
7500
7500
4100
7.5
35
1.7
4.66 62.9
56.4
0.57
2.35
3.0
4100 0.0045
10
44
2.1
4.4
72.0
63.6
0.59
2.55
3.5
3600 0.0073
31
M3ARF 100 LB
15
44
2.1
2.93 73.0
68.8
0.64
3.35
3.5
3700 0.0086
34
1.5
M3ARF 112 M
20.6 86
1.9
4.17 74.5
75.9
0.65
4.5
4.1
3600 0.016
41
2.2
M3ARF 132 S
29.2 130
1.6
4.45 80.5
77.8
0.67
5.9
5.3
3000 0.04
66
M3ARF 132 M
39.8 130
1.8
3.26 82.0
79.2
0.68
7.8
5.5
2600 0.047
73
54
230
2.1
4.39 84.1
81.1
0.69
10
5.2
600
0.11
139
5.5
M3ARF 160 M
74
230
2.4
3.17 84.7
75.0
0.70
13.4
5.4
600
0.11
139
7.5
M3ARF 160 L
100
230
2.4
2.31 86.3
82.4
0.70
18.1
5.4
600
0.127
154
1)
2)
3)
064 401-C
074 401-E
074 402-E
084 401-E
084 402-E
094 401-E
Current
22
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
7
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
Flange-mounted, 1 flange
Flange-mounted, 2 flanges
Flange-mounted, small flange
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
S
Motor
D
Motor
50 Hz
60 Hz
Brake
(input rectifier
voltage/brake voltage)
50 Hz
60 Hz
63-132
220-240 V'
380-420 VY
250-280 V'
380-420 V'
660-690 VY
440-480 V'
160-180
230 V'
400 VY
265 V'
400 V'
690 VY
460 V'
Motor
size
E
Motor
Motor
size
50 Hz
Brake
(input rectifier
voltage/brake voltage)
63-80
90-180
500 V'
F
Motor
Brake
(input rectifier
voltage/brake voltage)
50 Hz
Brake
(input rectifier
voltage/brake voltage)
500 VY
500 VY
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
201
Output
kW
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
1.1/0.55
1.5/0.75
2.0/1.0
2.6/1.3
4.4/2.2
5.6/2.8
2900/1450
2900/1450
2900/1460
2900/1460
2925/1450
2885/1440
M3ARF 90 S
M3ARF 90 L
M3ARF 100 L
M3ARF 112 M
M3ARF 132 SB
M3ARF 132 M
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 401-E
098 402-E
108 401-E
118 401-E
138 401-E
138 402-E
3.6/3.6
4.9/4.9
6.5/6.5
8.6/8.5
14.4/14.5
18.5/18.6
400 V 50 Hz
0.2/0.15 M3VRF 63 A
0.3/0.2 M3VRF 63 B
0.37/0.25 M3VRF 71 A
0.48/0.31 M3VRF 71 B
0.55/0.37 M3VRF 71 C
0.63/0.5 M3VRF 80 A
0.85/0.65 M3VRF 80 B
1.1/0.8 M3VRF 80 C
1.3/1
M3ARF 90 S
1.9/1.5 M3ARF 90 L
2.5/2.1 M3ARF 100 LA
3.4/2.5 M3ARF 100 LB
4/2.6
M3ARF 112 M
4.7/3.1 M3ARF 132 SB
6.3/4.4 M3ARF 132 SA
7.2/4.8 M3ARF 132 M
8/6.2
M3ARF 132 SC
9.6/7
M3ARF 132 MD
12.5/9
M3ARF 160 M
15/10.5 M3ARF 160 L
2800/1400
2740/1370
2700/1390
2780/1400
2800/1400
2690/1400
2725/1405
2730/1410
2730/1400
2820/1420
2800/1430
2810/1430
2865/1430
2820/1420
2895/1445
2870/1435
2910/1440
2900/1440
2890/1440
2900/1445
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 401-C
068 402-C
078 401-E
078 402-E
078 403-E
088 401-E
088 402-E
088 403-E
098 403-E
098 404-E
108 402-E
108 403-E
118 402-E
138 403-E
138 411-E
138 404-E
138 412-E
138 413-E
168 404-E
168 405-E
0.68/1.02
1.05/1.4
1.3/1.72
1.66/2.15
1.87/2.52
2.25/3.42
2.99/4.43
3.8/5.38
4.5/6.8
6.4/10
8.5/14
11.5/18
13.3/17.4
15.9/20.8
20.8/29
24/31.9
26.2/41.1
31.6/46.4
41/60
49/69
400 V 50 Hz
0.11/0.08 M3VRF 63 B
0.3/0.2 M3VRF 71 A
0.37/0.22 M3VRF 71 B
0.43/0.28 M3VRF 80 A
0.58/0.37 M3VRF 80 B
0.8/0.5 M3ARF 90 S
1.2/0.75 M3ARF 90 L
1.5/0.9 M3ARF 100 LA
1.8/1.1 M3ARF 100 LB
2.6/1.7 M3ARF 112 M
3.3/2.2 M3ARF 132 S
4.5/3
M3ARF 132 M
5.5/3.7 M3ARF 132 MD
7.5/5.5 M3ARF 160 M
11.5/8.5 M3ARF 160 L
1390/860
1390/900
1380/900
1380/910
1390/920
1430/940
1430/940
1440/960
1460/960
1445/960
1470/980
1470/980
1460/960
1465/965
1465/965
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 403-C
078 404-E
078 405-E
088 404-E
088 405-E
098 405-E
098 406-E
108 404-E
108 405-E
118 403-E
138 405-E
138 406-E
138 414-E
168 406-E
168 407-E
0.75/0.88
1.37/0.79
2.07/1.91
2.54/3.02
4/3.85
5.3/5
8/7.6
9.9/8.9
11/11
17.2/16.9
21.4/21.4
29.2/29.2
36/36.8
49/54
75/84
Efficiency
%
braking
TB
TS/TN
Nm
K1)
35
35
44
86
130
130
1.4/1.5
1.5/1.5
1.9/1.4
1.6/1.6
2/1.3
1.8/1.4
9.7/9.7
7.1/7.1
7.7/7.7
10/9.9
10.4/10
8.1/8.1
74/62
77/70
76/67
80/75
81/74
82/77
7.5
7.5
10
10
10
24
24
24
35
35
44
44
86
130
130
130
130
130
230
230
2.1/2
1.7/2.1
1.9/1.5
1.4/2
1.8/1.9
1.8/1.9
1.9/2
2/2
2/1.5
2.8/2
2.2/1.6
2.2/1.9
1.8/2.3
1.8/2.2
1.7/1.6
2.4/2.5
1.9/1.6
1.8/1.7
1.4/1.8
1.6/2.1
11/7.4
7.1/5.4
9.2/7
7.1/5.6
6.4/4.8
7.6/5.5
5.4/3.6
4.7/3.3
7.8/5.1
5.5/3.5
5.9/3.6
4.3/2.7
10/9.9
10.4/10
7.2/5.2
6.3/4.7
6.9/3.6
4.7/3.2
5.6/3.8
4.7/3.3
63/54
59/55
64/60
68/68
66/64
66/67
70/70
72/71
71/71
74/75
68/76
78/80
82/77
79/77
85/84
84/81
87/85
87/85
85.5/85.5
87/86
7.5
10
10
24
24
35
35
44
44
86
130
130
130
230
230
1.4/1.8
1.1/1.05
1/1.1
1.5/1.4
1.5/1.5
1.5/1.4
1.7/1.5
1.5/1.5
2.1/1.6
1.5/1.5
1.4/1.2
1.4/1.5
1.9/1.8
2.1/1.8
2.1/1.8
10/8.5
15.2/8.8
6.3/5.8
7.1/6
4/3.5
7/6.6
4.6/4.4
5.6/5.1
4.5/4.5
5/4.9
7/7
5.1/5.1
4.2/4.2
3.1/2.7
2.9/2.7
40/25
51/40
58/40
60/54
63/58
68/57
73/63
75/69
77/70
80/70
82/76
82/77
85/81
85.5/80.5
86.5/82.5
Power
factor
cos M
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
2.5/2
3.3/2.4
4.3/3.3
5.1/3.5
9.1/5.9
10.6/7
5.1/3.6
5.7/4.1
6.2/4
6.4/5
7.3/4.5
6.7/5
0.0019
0.0024
0.0041
0.012
0.016
0.022
20
23
32
45
55
76
0.65/0.65
0.95/0.85
0.95/0.7
1.2/0.9
1.5/1.2
1.6/1.35
2/1.7
2.55/2.05
3.1/2.6
4.4/3.9
6/5
7.2/5.9
7.6/6.5
9.2/7.7
11.4/9.5
13.3/11.5
14/12.7
16.8/14.1
22.5/19
27/23
3.6/2.8
2.8/2.8
3.3/3.1
3.6/4
4.7/4.3
3.6/4.2
4/4.4
4.2/4.7
3.9/3.8
5.1/4.4
4.8/4.4
5.3/5.4
6.3/6.2
5.5/5.7
6.5/5.7
7.1/6.2
7.8/5.6
7.6/5.9
5.2/4.6
5.8/4.9
0.00019
0.00026
0.00066
0.00089
0.0011
0.0013
0.0016
0.002
0.0032
0.0043
0.0069
0.0082
0,012
0,016
0,0155
0,022
0,0215
0,026
0,054
0,057
5
5.5
7
8
8.5
11
12.5
13
20
23
32
35
45
55
58
76
78
85
129
139
0.55/0.62
0.7/0.5
0.9/0.8
1.4/1.2
1.6/1.15
2.2/2
3/2.6
3.5/3
4.4/3.6
5.5/4.4
7.1/6.4
9.8/8
10.7/8.3
15.5/13
23/19.5
2.5/1.8
2.8/2
2.7/1.9
3.1/2.9
3.3/3.2
3.9/2.8
4.4/3.1
4.7/3.8
5.8/3.9
5.9/5.2
6.8/4.6
7.2/5.6
8/6.3
7.1/4.7
7/4.9
0.00026
0.00066
0.00089
0.0019
0.0022
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
0.036
0.089
0.119
5.5
7
8
12
12.5
20
23
32
35
45
61
79
84
129
139
Braking-torque ratio
202
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Output
kW
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
0.25/0.06 M3VRF 71 A
0.37/0.09 M3VRF 71 B
0.5/0.12 M3VRF 80 A
0.66/0.15 M3VRF 80 B
0.75/0.18 M3ARF 90 LA
1.3/0.33 M3ARF 90 LB
1.8/0.5 M3ARF 100 LB
2.2/0.59 M3ARF 112 MC
3.3/0.95 M3ARF 132 SA
4.4/1.3 M3ARF 132 MC
2760/660
2800/660
2730/700
2780/700
2875/720
2780/690
2860/705
2900/720
2940/730
2920/725
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
078 408-E
078 409-E
088 409-E
088 410-E
098 411-E
098 412-E
108 410-E
118 406-E
138 415-E
138 416-E
400 V 50 Hz
0.55/0.25 M3ARF 90 S
0.75/0.37 M3ARF 90 L
1.1/0.55 M3ARF 100 LA
1.5/0.75 M3ARF 100 LB
1.8/0.9 M3ARF 112 M
2.5/1.3 M3ARF 132 S
3.3/1.7 M3ARF 132 M
1450/700
1450/700
1460/710
1440/700
1460/715
1480/735
1470/725
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 407-E
098 408-E
108 406-E
108 407-E
118 404-E
138 407-E
138 408-E
400 V 50 Hz
0.11/0.06 M3VRF 63 B
0.18/0.11 M3VRF 71 A
0.3/0.15 M3VRF 71 B
0.45/0.25 M3VRF 80 A
0.63/0.33 M3VRF 80 B
0.75/0.37 M3VRF 80 C
0.7/0.37 M3ARF 90 S
1.1/0.55 M3ARF 90 L
1.5/0.75 M3ARF 100 LA
2/0.95
M3ARF 100 LB
2.5/1.5 M3ARF 112 M
3.8/1.9 M3ARF 132 S
5/2.5
M3ARF 132 M
8/4.5
M3ARF 160 M
12/7
M3ARF 160 L
1390/660
1380/680
1400/700
1380/700
1380/705
1390/710
1420/700
1390/685
1440/710
1440/710
1410/705
1450/730
1455/730
1440/730
1445/730
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 404-C
078 406-E
078 407-E
088 406-E
088 407-E
088 408-E
098 409-E
098 410-E
108 408-E
108 409-E
118 405-E
138 409-E
138 410-E
168 410-E
168 411-E
10
10
24
24
35
35
44
86
130
130
14/14
9.5/9.2
10.9/9.6
7.3/7.1
14/14
8/8
8.3/7.4
11.8/11
14/12
10.7/8.8
Power
factor
cos M
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
1/1.3
1/1.6
1.3/2
1.4/2.2
2.3/1.3
1.8/1.2
1.7/1.3
2.4/1.6
2.6/1.2
2.2/1.3
52/36
68/41
60/38
65/40
71.2/46.3
71/52
80/54
78/62
81/72
82/74
0.94/0.7
0.87/0.65
0.87/0.58
0.87/0.58
0.8/0.51
0.92/0.62
0.93/0.64
0.87/0.55
0.95/0.52
0.94/0.62
0.75/0.35
0.9/0.5
1.4/0.8
1.65/0.95
1.9/1.1
2.9/1.5
3.5/2.1
4.9/2.5
6.2/3.7
8.3/4.1
2.9/1.9
2.8/2
3.2/2.3
3.8/2.5
5.7/2.4
4.5/2.3
5.3/2.6
7/3.5
9.5/4.3
8.6/4
0.00066
0.00089
0.0013
0.0016
0.0043
0.0043
0.0082
0.015
0.0215
0.03
7
8
12.5
13
23
23
35
42
65
77
3.6/3.4
4.9/5
7.2/7.4
9.8/10
11.7/12
16.2/17
21.4/22.4
K1)
Efficiency
%
0.86/0.86
1.26/1.3
1.78/1.64
2.55/2.45
2.5/2.4
4.4/4.5
6.6/6.7
7.2/7.8
10.7/12.4
14.4/17.1
braking
TB
TS/TN
Nm
35
35
44
44
86
130
130
1.3/1.4
1.4/1.5
1.2/1.2
1.3/1.2
1.2/1.6
1.6/1.4
1.6/1.4
10.3/9.7
7.1/7
6.9/6.8
5.1/5
7.3/7.1
9.3/8.8
7/6.7
62/51
66/57
68/62
72/60
77/65
80/67
81/71
0.78/0.59
0.75/0.57
0.77/0.61
0.82/0.6
0.76/0.66
0.79/0.56
0.79/0.58
1.9/1.2
2.2/1.7
3.1/2.2
3.7/2.9
4.4/3
5.8/6
7.5/6
4.2/2.3
4.1/2.5
4.2/2.6
4.6/2.7
6.5/4
6/3.7
7/4.2
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
20
23
32
35
45
61
79
0.75/0.87
1.24/1.54
2.05/2.05
3.12/3.42
4.37/4.48
5.16/4.98
4.7/5.1
7.4/7.5
10/10
13/12
16.9/20.3
25/24.9
32.8/32.7
53/59
79/92
7.5
10
10
24
24
24
35
35
44
44
86
130
130
230
230
1.6/2.5
1.9/2.2
2/2.5
1.7/2.1
1.7/2.2
1.9/2.5
1.6/1.6
1.4/1.5
1.4/1.5
1.4/1.6
1.4/1.5
1.4/1.3
1.7/2
1.3/1.4
1.5/1.4
10/8.6
9.7/7.8
5.9/5.9
6.5/6
4/3.9
3.6/3.5
7.4/6.9
4.7/4.7
5/5
4.2/3.8
5/4.2
6/6
4.6/4.6
4.3/3.9
2.9/2.5
54/33
54/37
60/47
65/48
67/50
70/52
72/50
70/55
76/62
78/64
78/67
82/70
85/73
84.5/79.5
86.5/81
0.6/0.49
0.7/0.53
0.74/0.51
0.87/0.58
0.88/0.56
0.86/0.51
0.8/0.57
0.84/0.58
0.85/0.57
0.86/0.55
0.9/0.66
0.84/0.52
0.88/0.52
0.86/0.6
0.87/0.59
0.5/0.55
0.7/0.8
0.9/0.9
1.15/1.3
1.55/1.7
1.8/2
1.8/1.9
2.6/2.6
3.4/3.2
4.4/4
5.1/4.9
7.7/7.6
9.6/9.6
16/13.5
23/21
3/1.7
3.2/2.5
3.2/2.6
3.5/2.7
3.5/2.8
3.9/2.9
4.4/2.3
4.1/2.3
4.6/2.8
4.8/2.9
5.5/4.1
5.6/3.7
6.9/4.8
4.5/3.4
5/3.5
0.00026
0.00066
0.00089
0.0019
0.0022
0.0025
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
0.089
0.119
5.5
7
8
11
12
12.5
20
23
32
35
45
61
79
129
139
Braking-torque ratio
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement (pos 12):
Foot-mounted
Flange-mounted, 1 flange
Flange-mounted, 2 flanges
Flange-mounted, small flange
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
A
Motor
Motor
size
63-132
160
50 Hz
220 V
D
Motor
Brake
(input rectifier
voltage/brake voltage)
220 V/205 V d.c.
Motor
size
50 Hz
Brake
(input rectifier
voltage/brake voltage)
63-132
160
380-400 V
400 V
B
Motor
50 Hz
380 V
E
Motor
Brake
(input rectifier
voltage/brake voltage)
380 V/178 V d.c.
S
Motor
220-230 V
230 V
Brake
(input rectifier
voltage/brake voltage)
220-230 V/205 V d.c.
230 V/205 V d.c.
50 Hz
Brake
(input rectifier
voltage/brake voltage)
500 V
500 V
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
203
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 SA
132 SB
160 MA
160 M
160 L
180 M
TS/
TN
K1)
100% 75%
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
061 451-C
061 452-C
071 451-E
071 452-E
081 451-E
081 452-E
091 451-E
091 452-E
101 451-E
111 451-E
131 451-E
131 452-E
161 461-E
161 462-E
161 463-E
181 461-E
2820
2810
2840
2830
2870
2850
2870
2880
2900
2850
2855
2860
2915
2900
2915
2925
TB
Nm
Power
factor
cos M
0.62
0.87
1.25
1.86
2.49
3.69
5
7.5
10
13.4
18.4
25.1
36
49
60
72
7.5
7.5
10
10
24
24
35
35
44
86
130
130
200
200
200
200
3.5
3.6
3.8
3.6
2.9
2.3
2.4
2.7
2.7
2.8
3.2
3.4
2.1
2.3
2.5
3
Current
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
0.00023
0.00026
0.00051
0.0006
0.00074
0.00078
0.0021
0.0026
0.00453
0.01078
0.01657
0.01857
0.05096
0.05596
0.06396
0.06264
4.9
5.4
7
8
11
12
19
22
32
38
57
62
124
134
139
158
Basic design
12.5
8.33
7.69
5.26
9.6
6.48
7
4.6
4.4
6.41
7.06
5.17
5.55
4.1
3.3
2.8
73.7
77.5
77.1
79.2
81.2
81.4
80.1
83.6
86.0
86.0
86.0
88.0
88.4
89.4
90.4
91.5
70.6
75.8
76.5
78.2
79.3
79.5
76.2
83.9
84.1
86.2
86.6
86.2
88.0
89.7
90.7
91.7
0.64
0.71
0.72
0.76
0.75
0.78
0.82
0.87
0.88
0.91
0.88
0.89
0.88
0.90
0.91
0.89
0.56
0.66
1
1.35
1.8
2.5
3.35
4.37
5.95
7.4
10.5
13.9
20.5
27
32.5
39
400 V 50 Hz
4.2
4.5
5.5
5.7
6.2
6.1
5.5
7.0
7.5
7.5
7.8
8.5
6.1
6.0
6.7
8.0
3500
3500
2600
2600
2000
2000
1300
1200
1000
500
600
500
200
200
200
120
High-output design
0.37
M3VRS 63 BB
2.3
5.76 73.6
73.1
0.81
0.9
3.5
3500 0.00027
5.9
0.68
M3VRS 71 BB
3.2
4.34 78.9
77.4
0.82
1.59
5.2
2400 0.0006
0.75
M3VRS 71 BC
3.1
3.84 78.5
77.9
0.85
1.7
5.1
2400 0.0006
1.5
M3VRS 80 C
2.8
4.7
82.4
82.2
0.83
3.16
5.5
1800 0.00111
13
2.7
3)
M3ARS 90 LB
35
2.6
3.9
80.7
83.5
0.86
5.7
7.0
1200 0.0029
24
3)
M3ARS 100 LB
44
2.7
3.38 85.0
84.3
0.86
8.1
7.5
1000 0.00543
36
5.5
3)
M3ARS 112 MB
2.7
4.67 86.5
87.1
0.93
9.9
7.3
500
0.01273
66
9.2
3)
3.2
4.18 86.0
88.2
0.93
16.6
7.3
500
0.02457
77
11
3)
M3ARS 132 SC
130
3.2
3.51 87.0
87.4
0.93
19.6
8.0
500
0.02383
77
22
3)
M3ARS 160 LB
200
2.6
2.77 92.1
93.0
0.91
38
7.1
200
0.06896
145
1)
Braking-torque ratio
2)
3)
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
400 V'
690 VY
460 V'
160-180
230 V'
400 VY
400 V'
690 VY
400 V'
690 VY
460 V'
204
265 V'
460 VY
460 V'
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 LA
100 LB
112 M
132 S
132 M
160 M
160 L
180 M
180 L
TB
Nm
TS/
TN
Power
factor
cos M
K1)
100% 75%
9.37
5.76
5.88
4
6.31
4.7
4.66
3.5
2.93
2.2
3.23
3.59
2.63
3.2
2.3
1.9
1.6
63.7
65.6
70.4
74.6
75.3
78.2
77.5
80.3
83.0
85.0
84.5
87.0
88.0
88.4
90.0
90.4
91.1
58.4
62.1
69.1
72.1
73.1
75.6
76.4
78.1
82.7
83.9
83.9
87.7
88.6
88.8
90.5
90.4
91.5
0.59
0.64
0.71
0.69
0.76
0.74
0.81
0.79
0.81
0.81
0.80
0.83
0.83
0.78
0.82
0.84
0.82
0.46
0.63
0.74
1.05
1.4
1.9
2.59
3.45
4.8
6.48
8.6
11.1
14.8
22.5
29
35
42
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
062 451-C
062 452-C
072 451-E
072 452-E
082 451-E
082 452-E
092 451-E
092 452-E
102 451-E
102 452-E
112 451-E
132 451-E
132 452-E
162 461-E
162 462-E
182 461-E
182 462-E
1400
1380
1410
1420
1390
1410
1410
1420
1430
1430
1435
1450
1450
1465
1460
1455
1460
0.82
1.25
1.71
2.51
3.75
5.08
7.5
10
15
20
26.6
36.2
49.4
72
98
121
144
7.5
7.5
10
10
24
24
35
35
44
44
86
130
130
230
230
230
230
2.6
2.5
2.7
2.6
2.6
3.5
2.2
2.4
2.4
2.5
2.9
2.2
2.5
2.4
2.8
2.6
3.0
Current
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
0.00029
0.00036
0.00081
0.00104
0.00128
0.00159
0.0034
0.0045
0.00733
0.00863
0.01578
0.03357
0.04057
0.07696
0.08796
0.10464
0.12964
5
5.5
7
8
11
12
19
22
32
35
40
60
68
117
129
161
175
Basic design
400 V 50 Hz
3.1
3.1
4.3
4.4
4.6
4.7
5.0
5.0
5.5
5.5
7.0
7.3
7.9
6.9
7.2
7.0
8.0
7100
7100
6500
6500
5000
5000
3200
3200
2700
2700
2500
1800
1400
500
500
360
360
High-output design
0.25
0.45
M3VRS 63 BB
M3VRS 71 BB
2.5
2.1
4.28 70.3
3.22 75.5
67.4
75.3
0.67
0.76
0.78
1.15
3.2
4.1
7100 0.0004
6500 0.00104
6
8
0.55
M3VRS 71 C
2.7
2.7
76.9
0.73
1.45
4.8
6500 0.00125
0.95
77.3
M3VRS 80 C
2.9
3.75 78.9
77.9
0.75
2.35
4.3
500
1.85
3)
M3ARS 90 L
35
2.2
2.69 79.5
78.1
0.80
4.4
4.5
3200 0.0045
2.2
3)
M3ARS 90 LB
35
2.2
2.33 80.3
81.0
0.83
4.85
4.5
3200 0.0048
23
3)
M3ARS 100 LC
44
2.5
1.62 81.0
81.7
0.82
8.65
5.5
2700 0.009
36
5.5
3)
M3ARS 112 MB
2.8
2.14 84.5
83.5
0.83
11.4
7.1
2500 0.018
47
9.2
3)
130
2.0
2.14 88.0
88.6
0.85
17.8
7.3
1400 0.05
83
11
3)
M3ARS 132 MB
130
2.5
1.79 88.0
89.4
0.86
21
8.3
500
0.05
83
18.5
3)
M3ARS 160 LB
230
2.9
1.88 90.5
88.9
0.84
36
6.9
500
0.107
143
1)
Braking-torque ratio
2)
3)
0.00197
13
22
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
400 V'
690 VY
460 V'
160-180
230 V'
400 VY
400 V'
690 VY
400 V'
690 VY
460 V'
265 V'
460 VY
460 V'
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
205
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
M3ARS
11
M3ARS 160 L
TS/
TN
K1)
100% 75%
400 V 50 Hz
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
063 451-C
063 452-C
073 451-E
073 452-E
083 451-E
083 452-E
093 451-E
093 452-E
103 451-E
113 451-E
133 451-E
133 452-E
133 453-E
163 451-E
Current
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
Basic design
910
860
920
920
925
925
930
930
950
940
960
960
955
970
0.95
1.27
1.88
2.61
3.82
5.68
7.5
11
15
22.3
29.8
39.7
55
74
7.5
7.5
10
10
24
24
35
35
44
86
130
130
130
230
2.1
1.8
2.1
2.5
3.1
2.9
1.9
2.1
1.9
2.1
2.0
2.0
2.2
2.0
7.5
5.76
5.26
3.84
6.15
4.06
4.66
3.18
2.93
3.85
4.36
3.27
2.36
3.14
47.1
56.0
61.1
64.9
72.9
73.3
71.5
74.4
80.0
80.5
84.5
85.5
86.0
89.3
42.5
53.5
57.7
62.3
70.8
71.9
70.7
72.5
77.0
79.3
82.7
83.1
85.0
88.4
0.56
0.55
0.69
0.65
0.72
0.71
0.67
0.69
0.71
0.74
0.75
0.78
0.78
0.79
0.51
0.56
0.64
0.86
1.04
1.55
2.36
3.25
3.92
5.4
6.9
8.7
11.9
15.4
2.1
2.4
2.9
3.2
3.8
3.4
4.0
4.0
4.5
5.6
6.1
7.1
6.9
6.7
7700
7700
7500
7500
7000
7000
3800
3900
3300
3200
2400
1900
1900
600
0.0003
0.00037
0.00078
0.00096
0.00186
0.0022
0.0034
0.0045
0.0086
0.015
0.033
0.04
0.047
0.087
5
5.5
7
8
11
12
19
22
34
40
59
66
74
129
109
230
2.2
2.13 89.8
88.5
0.78
23
7.1
600
0.127
149
400 V 50 Hz
0.15
M3VRS 63 BB
1.61 7.5
2.2
4.68 56.9
52.1
0.54
0.74
2.2
7700 0.00042
0.32
M3VRS 71 C
3.33 10
2.6
3.1
61.6
0.63
1.15
3.2
7500 0.00125
1.3
3)
M3ARS 90 LB
13.5 35
1.9
2.59 69.0
69.0
0.71
3.85
4.0
3800 0.005
24
2.2
3)
M3ARS 100 LC
22
1.9
72.8
0.71
5.9
4.5
3300 0.009
37
3)
30.6 86
2.0
2.81 80.0
79.9
0.76
7.2
5.5
3200 0.018
46
6.5
3)
64
130
2.0
2.01 85.0
84.5
0.75
14.8
6.6
2400 0.051
79
14
3)
M3ARS 160 LB
139
230
2.7
1.65 89.1
84.5
0.77
29.5
7.6
1900 0.147
164
1)
2)
3)
63 A
63 B
71 A
71 B
80 A
80 B
90 S
90 L
100 L
112 M
132 S
132 MA
132 MB
160 M
TB
Nm
Power
factor
cos M
44
High-output design
64.8
77.0
Braking-torque ratio
No-load (shaft-free) operations/hour
Temperature rise class F.
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
400 V'
690 VY
460 V'
160-180
230 V'
400 VY
400 V'
690 VY
400 V'
690 VY
460 V'
206
265 V'
460 VY
460 V'
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Efficiency
rated braking
Output Motor
kW
type
Product code
Speed TN
r/min Nm
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
680
690
690
700
700
700
7.5
10
10
24
24
35
0.78
1.25
1.67
2.46
3.52
5
TB
Nm
Power
factor
cos M
Current
K1)
100% 75%
2.1
2.3
2.5
3.2
2.9
1.9
9.4
7.69
5.88
9.6
6.85
7
38.3
45.8
46.4
59.9
70.7
61.5
31.8
37.5
38.1
54.5
67.4
43.4
0.48
0.57
0.55
0.60
0.62
0.56
0.45
0.52
0.69
0.75
0.85
1.6
1.8
2.2
2.2
3.1
3.1
3.0
7700
7500
7500
7500
7500
4100
TS/
TN
400 V 50 Hz
IN
A
IS/IN
c/h2)
Moment
of inertia
J=1/4GD2
kgm2
Weight
foot
mounted
kg
0.00037
0.00078
0.00096
0.0022
0.00245
0.0034
5.5
7
8
11
12
19
Basic design
0.055
0.09
0.12
0.18
0.25
0.37
M3VRS
M3VRS
M3VRS
M3VRS
M3VRS
M3ARS
0.55
M3ARS 90 L
35
7.5
1.7
4.66 62.9
56.4
0.57
2.35
3.0
4100 0.0045
22
0.75
M3ARS 100 LA
44
10
2.1
4.4
72.0
63.6
0.59
2.55
3.5
3600 0.0073
31
1.1
M3ARS 100 LB
44
15
2.1
2.93 73.0
68.8
0.64
3.35
3.5
3700 0.0086
34
1.5
M3ARS 112 M
86
20.6 1.9
4.17 74.5
75.9
0.65
4.5
4.1
3600 0.016
41
2.2
M3ARS 132 S
130
29.2 1.6
4.45 80.5
77.8
0.67
5.9
5.3
3000 0.04
66
M3ARS 132 M
130
39.8 1.8
3.26 82.0
79.2
0.68
7.8
5.5
2600 0.047
73
064 451-E
074 451-E
074 452-E
084 451-E
084 452-E
094 451-E
M3ARS 160 MA
230
54
2.1
4.39 84.1
81.1
0.69
10
5.2
600
0.11
139
5.5
M3ARS 160 M
230
74
2.4
3.17 84.7
75.0
0.70
13.4
5.4
600
0.11
139
7.5
M3ARS 160 L
230
100
2.4
2.31 86.3
82.4
0.70
18.1
5.4
600
0.127
154
1)
2)
Braking-torque ratio
No-load (shaft-free) operations/hour
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
7
Code letters for supplementing product code for mounting arrangement:
Foot-mounted
Flange-mounted, 1 flange
Flange-mounted, 2 flanges
Flange-mounted, small flange
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
S
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
D
Motor
50 Hz
60 Hz
Brake
50 Hz
60 Hz
G
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
400 V'
690 VY
460 V'
160-180
230 V'
400 VY
400 V'
690 VY
400 V'
690 VY
460 V'
265 V'
460 VY
460 V'
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
207
Output
kW
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
1.1/0.55
1.5/0.75
2/1
2.6/1.3
4.4/2.2
5.6/2.8
2900/1450
2900/1450
2900/1460
2900/1460
2925/1450
2885/1440
M3ARS 90 S
M3ARS 90 L
M3ARS 100 L
M3ARS 112 M
M3ARS 132 SB
M3ARS 132 M
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 451-E
098 452-E
108 451-E
118 451-E
138 451-E
138 452-E
3.6/3.6
4.9/4.9
6.5/6.5
8.6/8.5
14.4/14.5
18.5/18.6
400 V 50 Hz
0.2/0.15 M3VRS 63 A
0.3/0.2 M3VRS 63 B
0.37/0.25 M3VRS 71 A
0.48/0.31 M3VRS 71 B
0.55/0.37 M3VRS 71 C
0.63/0.5 M3VRS 80 A
0.85/0.65 M3VRS 80 B
1.1/0.8 M3VRS 80 C
1.3/1
M3ARS 90 S
1.9/1.5 M3ARS 90 L
2.5/2.1 M3ARS 100 LA
3.4/2.5 M3ARS 100 LB
4.26
M3ARS 112 M
6.3/4.4 M3ARS 132 SA
4.7/3.1 M3ARS 132 SB
8/6.2
M3ARS 132 SC
7.2/4.8 M3ARS 132 M
9.6/7
M3ARS 132 MD
12.5/9
M3ARS 160 M
15/10.5 M3ARS 160 L
2800/1400
2740/1370
2700/1390
2780/1400
2800/1400
2690/1400
2725/1405
2730/1410
2730/1400
2820/1420
2800/1430
2810/1430
2865/1430
2895/1445
2820/1420
2910/1440
2870/1435
2900/1440
2890/1440
2900/1445
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 451-C
068 452-C
078 451-E
078 452-E
078 453-E
088 451-E
088 452-E
088 453-E
098 453-E
098 454-E
108 452-E
108 453-E
118 452-E
138 461-E
138 453-E
138 462-E
138 454-E
138 463-E
168 454-E
168 455-E
0.68/1.02
1.05/1.4
1.3/1.72
1.66/2.15
1.87/2.52
2.25/3.42
2.99/4.43
3.8/5.38
4.5/6.8
6.4/10
8.5/14
11.5/18
13.3/17.4
20.8/29
15.9/20.8
26.2/41.1
24/31.9
31.6/46.4
41/60
49/69
400 V 50 Hz
0.11/0.08 M3VRS 63 B
0.3/0.2 M3VRS 71 A
0.37/0.22 M3VRS 71 B
0.43/0.28 M3VRS 80 A
0.58/0.37 M3VRS 80 B
0.8/0.5 M3ARS 90 S
1.2/0.75 M3ARS 90 L
1.5/0.9 M3ARS 100 LA
1.8/1.1 M3ARS 100 LB
2.6/1.7 M3ARS 112 M
3.3/2.2 M3ARS 132 S
3.3/2.2 M3ARS 132 M
5.5/3.7 M3ARS 132 MD
7.5/5.5 M3ARS 160 M
11.5/8.5 M3ARS 160 L
1390/860
1390/900
1380/900
1380/910
1390/920
1430/940
1430/940
1440/960
1460/960
1445/960
1470/980
1470/980
1460/960
1465/965
1465/965
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 453-C
078 454-E
078 455-E
088 454-E
088 455-E
098 455-E
098 456-E
108 454-E
108 455-E
118 453-E
138 455-E
138 456-E
138 464-E
168 456-E
168 457-E
0.75/0.88
1.37/0.79
2.07/1.91
2.54/3.02
4/3.85
5.3/5
8/7.6
9.9/8.9
11/11
17.2/16.9
21.4/21.4
29.2/29.2
36/36.8
49/54
75/84
braking
TB
TS/TN
Nm
K1)
35
35
44
86
130
130
9.7/9.7
7.1/7.1
7.7/7.7
10/9.9
8.1/8.1
10.4/10
Efficiency
%
Power
factor
cos M
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
74/62
77/70
76/67
80/75
81/74
82/77
0.85/0.64
0.87/0.67
0.89/0.66
0.92/0.72
0.86/0.73
0.93/0.75
2.5/2
3.3/2.4
4.3/3.3
5.1/3.5
9.1/5.9
10.6/7
5.1/3.6
5.7/4.1
6.2/4
6.4/5
7.3/4.5
6.7/5
0,0019
0,0024
0,0041
0,012
0,016
0,022
20
23
32
45
55
76
2.1/2
1.7/2.1
1.9/1.5
1.4/2
1.8/1.9
1.8/1.9
1.9/2
2/2
2/1.5
2.8/2
2.2/1.6
2.2/1.9
1.8/2.3
1.7/1.6
1.8/2.2
1.9/1.6
2.4/2.5
1.8/1.7
1.4/1.8
1.6/2.1
7.1/5.4
11/7.4
9.2/7
7.1/5.6
6.4/4.8
7.6/5.5
5.4/3.6
4.7/3.3
7.8/5.1
5.4/3.5
5.9/3.6
4.3/2.7
10/9.9
7.2/5.2
10.4/10
6.9/3.6
6.3/4.7
4.7/3.2
5.6/3.8
4.7/3.3
63/54
0.7/0.63
59/55
0.78/0.63
64/60
0.89/0.79
68/68
0.91/0.76
66/64
0.8/0.65
66/67
0.87/0.79
70/70
0.88/0.8
72/71
0.88/0.79
71/71
0.88/0.8
74/75
0.82/0.76
68/76
0.88/0.81
78/80
0.88/0.85
82/77
0.93/0.76
85/84
0.94/0.8
79/77
0.92/0.76
87/85
0.95/0.83
84/81
0.92/0.76
87/85
0.95/0.85
85.5/85.5 0.93/0.8
87/86
0.93/0.77
7.5
10
10
24
24
35
35
44
44
86
130
130
130
230
230
1.4/1.8
1.1/1.05
1/1.1
1.5/1.4
1.5/1.5
1.5/1.4
1.7/1.5
1.5/1.5
2.1/1.6
1.5/1.5
1.4/1.2
1.4/1.5
1.9/1.8
2.1/1.8
2.1/1.8
10/8.5
15.2/8.8
6.3/5.8
7.1/6
4/3.5
7/6.6
4.6/4.4
5.6/5.1
4.5/4.5
5/4.9
4.5/3.0
5.1/5.1
4.2/4.2
3.1/2.7
2.9/2.7
40/25
0.7/0.72
51/40
0.82/0.72
58/40
0.83/0.8
60/54
0.85/0.81
63/58
0.85/0.8
68/57
0.8/0.66
73/63
0.81/0.67
75/69
0.84/0.65
77/70
0.78/0.64
80/70
0.85/0.76
82/76
0.8/0.65
82/77
0.81/0.7
85/81
0.88/0.8
85.5/80.5 0.83/0.77
86.5/82.5 0.84/0.76
0.65/0.65
0.95/0.85
0.95/0.7
1.2/0.9
1.5/1.2
1.6/1.35
2/1.7
2.55/2.05
3.1/2.6
4.4/3.9
6/5
7.2/5.9
7.6/6.5
11.4/9.5
9.2/7.7
14/12.7
13.3/11.5
16.8/14.1
22.5/19
27/23
3.6/2.8
2.8/2.8
3.3/3.1
3.6/4
4.7/4.3
3.6/4.2
4/4.4
4.2/4.7
3.9/3.8
5.1/4.4
4.8/4.4
5.3/5.4
6.3/6.2
6.5/5.7
5.5/5.7
7.8/5.6
7.1/6.2
7.6/5.9
5.2/4.6
5.8/4.9
0.00019
0.00026
0.00066
0.00089
0.0011
0.0013
0.0016
0.002
0.0032
0.0043
0.0069
0.0082
0.012
0.0155
0.016
0.0215
0.022
0.026
0.054
0.057
5
5.5
7
8
8.5
11
12.5
13
20
23
32
35
45
58
55
78
76
85
129
139
2.5/1.8
2.8/2
2.7/1.9
3.1/2.9
3.3/3.2
3.9/2.8
4.4/3.1
4.7/3.8
5.8/3.9
5.9/5.2
6.8/4.6
7.2/5.6
8/6.3
7.1/4.7
7/4.9
0.00026
0.00066
0.00089
0.0019
0.0022
0.0032
0.0043
0.0069
0.0082
0.018
0,038
0,048
0,036
0,089
0,119
5.5
7
8
12
12.5
20
23
32
35
45
61
79
84
129
139
Braking-torque ratio
208
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Output
kW
Motor
type
Product code
Speed
r/min
Torque
rated
TN
Nm
400 V 50 Hz
0.25/0.06 M3VRS 71 A
0.37/0.09 M3VRS 71 B
0.5/0.12 M3VRS 80 A
0.66/0.15 M3VRS 80 B
0.75/0.18 M3ARS 90 LA
1.3/0.33 M3ARS 90 LB
1.8/0.5 M3ARS 100 LB
2.2/0.59 M3ARS 112 MC
3.3/0.95 M3ARS 132 SA
4.4/1.3 M3ARS 132 MC
2760/660
2800/660
2730/700
2780/700
2875/720
2780/690
2860/705
2900/720
2940/730
2920/725
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
078 458-E
078 459-E
088 459-E
088 460-E
098 461-E
098 462-E
108 460-E
118 456-E
138 465-E
138 466-E
0.86/0.86
1.26/1.3
1.78/1.64
2.55/2.45
2.5/2.4
4.4/4.5
6.0/6.7
7.2/7.8
10.7/12.4
14.4/17.1
400 V 50 Hz
0.55/0.25 M3ARS 90 S
0.75/0.37 M3ARS 90 L
1.1/0.55 M3ARS 100 LA
1.5/0.75 M3ARS 100 LB
1.8/0.9 M3ARS 112 M
2.5/1.3 M3ARS 132 S
3.3/1.7 M3ARS 132 M
1450/700
1450/700
1460/710
1440/700
1460/715
1480/735
1470/725
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
098 457-E
098 458-E
108 456-E
108 457-E
118 454-E
138 457-E
138 458-E
3.6/3.4
4.9/5
7.2/7.4
9.8/10
11.7/12
16.2/17
21.4/22.4
400 V 50 Hz
0.11/0.06 M3VRS 63 B
0.18/0.11 M3VRS 71 A
0.3/0.15 M3VRS 71 B
0.45/0.25 M3VRS 80 A
0.63/0.33 M3VRS 80 B
0.75/0.37 M3VRS 80 C
0.7/0.37 M3ARS 90 S
1.1/0.55 M3ARS 90 L
1.5/0.75 M3ARS 100 LA
2/0.95
M3ARS 100 LB
2.5/1.5 M3ARS 112 M
3.8/1.9 M3ARS 132 S
5/2.5
M3ARS 132 M
8/4.5
M3ARS 160 M
12/7
M3ARS 160 L
1390/660
1380/680
1400/700
1380/700
1380/705
1390/710
1420/700
1390/685
1440/710
1440/710
1410/705
1450/730
1455/730
1440/730
1445/730
1)
3GVR
3GVR
3GVR
3GVR
3GVR
3GVR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
3GAR
068 454-C
078 456-E
078 457-E
088 456-E
088 457-E
088 458-E
098 459-E
098 460-E
108 458-E
108 459-E
118 455-E
138 459-E
138 460-E
168 460-E
168 461-E
0.75/0.87
1.24/1.54
2.05/2.05
3.12/3.42
4.37/4.48
5.16/4.98
4.7/5.1
7.4/7.5
10/10
13/12
16.9/20.3
25/24.9
32.8/32.7
53/59
79/92
Efficiency
%
braking
TB
TS/TN
Nm
K1)
10
10
24
24
35
35
44
86
130
130
14/14
9.5/9.2
10.9/9.6
7.3/7.1
14/14
8/8
8.3/7.4
11.8/11
14/12
10.7/8.8
Power
factor
cos M
Current
IN
IS/IN
A
Moment
of inertia
J=1/4GD2
kgm2
Weight
IM
1001
kg
52/36
0.94/0.7
68/41
0.87/0.65
60/38
0.87/0.58
65/40
0.87/0.58
71.2/46.3 0.8/0.51
71/52
0.92/0.62
80/54
0.93/0.64
78/62
0.87/0.55
81/72
0.95/0.52
82/74
0.94/0.62
0.75/0.35
0.9/0.5
1.4/0.8
1.65/0.95
1.9/1.1
2.9/1.5
3.5/2.1
4.9/2.5
6.2/3.7
8.3/4.1
2.9/1.9
2.8/2
3.2/2.3
3.8/2.5
5.7/2.4
4.5/2.3
5.3/2.6
7/3.5
9.5/4.3
8.6/4
0,00066
0,00089
0,0013
0,0016
0,0043
0,0043
0,0082
0,015
0,0215
0,03
7
8
12,5
13
23
23
35
42
65
77
1.3/1.4
1.4/1.5
1.2/1.2
1.3/1.2
1.2/1.6
1.6/1.4
1.6/1.4
10.3/9.7
7.1/7
6.9/6.8
5.1/5
7.3/7.1
9.3/8.8
7/6.7
62/51
66/57
68/62
72/60
77/65
80/67
81/71
0.78/0.59
0.75/0.57
0.77/0.61
0.82/0.6
0.76/0.66
0.79/0.56
0.79/0.58
1.9/1.2
2.2/1.7
3.1/2.2
3.7/2.9
4.4/3
5.8/6
7.5/6
4.2/2.3
4.1/2.5
4.2/2.6
4.6/2.7
6.5/4
6/3.7
7/4.2
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
20
23
32
35
45
61
79
1.6/2.5
1.9/2.2
2/2.5
1.7/2.1
1.7/2.2
1.9/2.5
1.6/1.6
1.4/1.5
1.4/1.5
1.4/1.6
1.4/1.5
1.4/1.3
1.7/2
1.3/1.4
1.5/1.4
10/8.6
9.7/7.8
5.9/5.9
6.5/6
4/3.9
3.6/3.5
7.4/6.9
4.7/4.7
5/5
4.2/3.8
5/4.2
6/6
4.6/4.6
4.3/3.9
2.9/2.5
54/33
0.6/0.49
54/37
0.7/0.53
60/47
0.74/0.51
65/48
0.87/0.58
67/50
0.88/0.56
70/52
0.86/0.51
72/50
0.8/0.57
70/55
0.84/0.58
76/62
0.85/0.57
78/64
0.86/0.55
78/67
0.9/0.66
82/70
0.84/0.52
85/73
0.88/0.52
84.5/79.5 0.86/0.6
86.5/81 0.87/0.59
0.5/0.55
0.7/0.8
0.9/0.9
1.15/1.3
1.55/1.7
1.8/2
1.8/1.9
2.6/2.6
3.4/3.2
4.4/4
5.1/4.9
7.7/7.6
9.6/9.6
16/13.5
23/21
3/1.7
3.2/2.5
3.2/2.6
3.5/2.7
3.5/2.8
3.9/2.9
4.4/2.3
4.1/2.3
4.6/2.8
4.8/2.9
5.5/4.1
5.6/3.7
6.9/4.8
4.5/3.4
5/3.5
0.00026
0.00066
0.00089
0.0019
0.0022
0.0025
0.0032
0.0043
0.0069
0.0082
0.018
0.038
0.048
0.089
0.119
5.5
7
8
11
12
12.5
20
23
32
35
45
61
79
129
139
Braking-torque ratio
The bullets in the product code indicate choice of mounting arrangement and voltage and frequency code, see below and ordering
information page.
Code letters for supplementing product code for mounting arrangement (pos 12):
Foot-mounted
Flange-mounted, 1 flange
Flange-mounted, 2 flanges
Flange-mounted, small flange
A
B for frame sizes 63-100, 180; E for frame sizes 112-160.
N for frame sizes 90-132
C for frame sizes 63-100
Code letters for supplementing product code for voltage and frequency (pos 13):
Motor
size
A
Motor
50 Hz
Brake
50 Hz
B
Motor
50 Hz
Brake
50 Hz
S
Motor
50 Hz
Brake
50 Hz
D
Motor
50 Hz
Brake
50 Hz
63-132
160
220 V
220 V'
380 V
380 V'
220-230 V
230 V
230 V'
230 V'
380-400 V
400 V
400 V'
400 V'
Motor
size
E
Motor
50 Hz
Brake
50 Hz
H
Motor
50 Hz
Brake
50 Hz
63-132
160
500 V
500 V
500 V'
500 V'
415 V
415 V
415 V'
415 V'
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
209
Variant
M3VRF/S
M3ARF/S
63
71
80
90
100
112
132
160
180
Brakes
086
087
NA
Hand release
285
288
Brake motor with voltage code S for the motor and separate
supply of the brake for voltage corresponding to code D.
289
Brake motor with voltage code D for the motor and separate
supply of the brake for voltage corresponding to code S.
290
Brake motor with a.c. brake, change into d.c. brake keeping
the voltage code.
Brake motor with d.c. brake, change into a.c. brake keeping
the voltage code.
088
213
291
Special voltage
209
Protection
005
For other variant codes please see section for standard aluminum motors or consult ABB.
=
=
=
=
=
Included as standard
New manufacture only.
On modification of a stocked motor or on new manufacture, the number per order may be limited.
On request.
Not applicable.
210
M000134
S
P
M
R
NA
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
Sizes 63-180
Dimension drawings
IM B3 (IM 1001)
AC
LP
UB1
AE
UB2
GA
M000135
HL
HC
G
DB EG
HD
D
AA
BA
BC
E
HA
AB
BB
Motor
size
AA
AB
AC
AE
BA
BB
BC
DB
EG
63 A/B
71
80
90S
90 L
100 L
112 M
132 S
132 M
160 M
160 L
180
100
112
125
140
140
160
190
216
216
254
254
279
26
24
28
27
27
32
41
47
47
56
56
65.5
120
136
154
170
170
197
222
262
262
310
310
340
123
139
156
177
177
197
221
261
261
314
314
314
85
85
97
110
110
110
160
160
160
210
210
210
80
90
100
100
125
140
140
140
178
210
254
241
21
31
34
30
30
34
31
40
40
55
55
91
96
110
125
125
150
172
168
212
212
287.5
287.5
329
21
31
34
30
30
34
31
76
76
86
86
91
40
45
50
56
56
63
70
89
89
108
108
121
11
14
19
24
24
28
28
38
38
42
42
48
M4
M5
M6
M8
M8
M10
M10
M12
M12
M16
M16
M16
23
30
40
50
50
60
60
80
80
110
110
110
10
13
16
19
19
22
22
28
28
36
36
36
Motor
size
GA
HA
HC
HD
HL
LP
UB1
UB2
63 A/B
71
80
90S
90 L
100 L
112 M
132 S
132 M
160 M
160 L
180
4
5
6
8
8
8
8
10
10
12
12
14
12.5
16
21.5
27
27
31
31
41
41
45
45
51.5
63
71
80
90
90
100
112
132
132
160
160
180
10
9
10
10
10
12
12
14
14
20
20
20
177
177
197
226
264
264
325
325
345
180
176
190
217
217
237
258
296
296
369
369
389
107
114
124
161
161
173
184
225
225
253
253
253
7
7
10
10
10
12
12
12
12
15
15
15
270
316
360
370
395
453
487
606
606
782
782
782
66
76
70
70
70
105
105
119
119
139
139
139
M16
M20
M20
M20
M20
M20
M20
M20
M20
M40
M40
M40
Pg11
Pg16
Pg16
M25
M25
M25
M25
M25
M25
M40
M40
M40
Tolerances:
D ISO j6 (d 28 )
D ISO k6 (38-42 )
F
ISO h9
H + 0, - 0.5
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
211
Sizes 63-180
Dimension drawings
IM B5 (IM 3001), IM V1 (IM 3011), IM B14 (IM 3601)
M000136
L
LP
UB1
UB2
GA
HL
HB
P N
G
AC
EG
DB
D
T
45
LA
IM B5 (IM 3001)
Motor
size
AC
DB
EG
GA
HB
HL
LP
UB1
UB2
63 A/B
71
80
90S
90 L
100 L
112 M
132 S,M
160 M,L
180
123
139
156
178
178
198
223
264
317
317
11
14
19
24
24
28
28
38
42
48
M4
M5
M6
M8
M8
M10
M10
M12
M16
M16
23
30
40
50
50
60
60
80
110
110
10
13
16
19
19
22
22
28
36
36
4
5
6
8
8
8
8
10
12
14
12.5
16
21.5
27
27
31
31
41
45
51.5
117
105
110
127
127
137
146
164
209
209
107
114
124
161
161
173
184
225
253
253
270
316
360
370
395
453
487
606
782
782
66
76
70
70
70
105
105
119
139
139
M16
M20
M20
M20
M20
M20
M20
M20
M40
M40
Pg 11
Pg 16
Pg16
M25
M25
M25
M25
M25
M40
M40
IM B5 (IM 3001)
Motor
size
IEC
flange
LA
S 1)
Motor
size
IEC
flange
LA
63 A/B
71
80
90
100
112
132
160
160 2)
180
FF115
FF130
FF165
FF165
FF215
FF215
FF265
FF265
FF300
FF300
10
10
12
11
11
11
12
12
20
20
115
130
165
165
215
215
265
265
300
300
95
110
130
130
180
180
230
230
250
250
140
160
200
200
250
250
300
300
350
350
M8
M8
M10
M10
M12
M12
M12
M12
M16
M16
3
3.5
3.5
3.5
4
4
4
4
5
5
63 A/B
71
80
90
100
112 3)
132
FT75
FT85
FT100
FT115
FT130
FT130
FT165
10
10
10
14
16
9.5
14.5
75
85
100
115
130
130
165
60
70
80
95
110
110
130
90
105
120
140
160
160
200
M5
M6
M6
M8
M8
M8
M8
2.5
2.5
3
3
3.5
3.5
3.5
Tolerances:
D ISO j6 (d 28 )
D ISO k6 (38-42 )
F
ISO h9
1)
2)
3)
Modular flanges:
Brake motors sizes 71-132 can be supplied with several non
standard modular flange dimensions
212
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
63 A/B
BB
71
80
90
100
Axially locked
bearings
180
Material
Material
Bearings
160
132
Material
112
Cast iron
30 m.
D-end
62022Z/C3
62032Z/C3
62042Z/C3
62052Z/C3
63062Z/C3
62062Z/C3
62082Z/C3
63092Z/C3
63102Z/C3
N-end
62022Z/C3
62032Z/C3
62042Z/C3
62052Z/C3
62062Z/C3
62062Z/C3
62082Z/C3
62092Z/C3
62092Z/C3
System
D-end
V-ring
N-end
V-ring
Lubrication
Terminal box
Material
Surface treatment
Srews
Connections
2xM20 + Pg16
2 x(M25 + M20)
2 x(M25 + M20)
2 x (M40 + M16)
2.5
10
35
Terminal box
Fan
Material
Fan cover
Material
Steel.
Stator winding
Material
Impregnation
Insulation class
Copper.
Polyester varnish. Tropicallised.
Insulation class F. Temperature rise class B, unless otherwise stated.
Stator winding
temperature sensors
Rotor winding
Optional.
Material
Die-cast aluminum.
Balancing method
Key ways
Enclosure
Cooling method
IC 411
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
213
214
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Brake EN 12-2006
www.abb.com/motors&drives
> Motors
> Low voltage motors
> General purpose motors
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
215
CSR
Starting and run capacitor
Single phase motor with attached run capacitor,
starting capacitor and electronic start relay mounted in
the terminal box.
M000139
PSC
Run capacitor
Single-phase motor with attached run capacitor. The
starting torque is 30 - 70%, which makes this motor
particularly suitable for applications with low starting
torque requirements, such as fans, circular saws,
polishing machines and centrifugal pumps where the
shaft seal does not require a high breakaway torque.
Basic PSC model.
216
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
PSC
M000140
Reversing
As a rule a single phase motor can only reverse when
it stops completely before the rotational direction is
changed. In CSR motors it is also important that the
capacitor is discharged before the voltage is reconnected, as otherwise the starter relay will not connect the
starter capacitor.
M000141
Speed regulation is suitable for the following applications: fans where blades are mounted directly on the
motor shaft and centrifugal pumps where the shaft seal
does not require a high breakaway torque.
8
No load
Standard single phase motors cannot run idle for a
long period. The losses are greater when running idle
than at full load. If the motor is to run idle for a long
period, specially designed windings must be produced.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
217
Mechanical design
Stator
Stator framework, bearing shields and feet are made of
aluminum alloy with low copper content.
Drain holes
When mounting the motors, it should be ensured that
the drain hole faces downwards. In the case of vertical
mounting, the upper plug must be hammered home. In
very dusty environments both plugs should be hammered home.
M000142
Closed
Open
Open
Open
218
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
Terminal box
on top
right side
left side
56-63
standard
71-100
standard
on request
on request
M000144
M000143
Connections
The terminal block is provided with 6 terminals for connecting Cu-cable. The terminals are marked in accordance with IEC 60034-8.
Connection openings
Motor
size
Opening
Metric
cable entry
Cable
diameter,
mm, min-max
Terminal
bolt size
6x
Maximum
connectable
Cu-cable area, mm2
56-63
Knock-out opening
1 x M16 x 1.5; 1 x Pg 11
5-12
M4
2.5
71-80
Knock-out opening
2 x M20 x 1.5; 1 x Pg 16
8-15
M4
90-100
Knock-out opening
11-16
M4
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
219
Bearings
The motors are provided with bearings, according to
the tables on the right.
Motor
size
D-end
N-end
56
6201-2Z/C3
6201-2Z/C3
63
6202-2Z/C3
6201-2Z/C3
71
6203-2Z/C3
6202-2Z/C3
80
6204-2Z/C3
6203-2Z/C3
90
6205-2Z/C3
6204-2Z/C3
100
6306-2Z/C3
6205-2Z/C3
Axially-locked bearings
The table on the right shows which of the motors
bearings is axially locked in the bearing seat. In motor
sizes 56 to 80 the locking is done by an inner bearing
circlip, in motor sizes 90 and 100 by an inner bearing
cover.
1)
Motor
size
Foot-mounted
motors
Flange-mounted motors
Large flange
Small flange
56-63
On request
On request
On request
71-80
On request
D-end
On request
90-100
D-end 1)
D-end 1)
D-end 1)
Lifetime of bearing/grease
The motors are supplied with bearings that are
lubricated for life with a bearing grease for use at
normal temperatures in dry or humid environments.
The greases operating temperature is between -40
and +160C. See also variant code 039 under the
heading Bearings and Lubrication.
The life time of the grease L10 is defined as the
number of operating hours after which 90% of the
bearings are sufficently well lubricated. 50% of the
bearings can achieve a grease life time that is twice as
long.
Motor size
No. of poles
Hours
56-80
2-6
40.000
90
30.000
90
4-6
40.000
100
28.000
100
4-6
40.000
Pulley diameter
When the desired bearing life has been determined, the
minimum permissible pulley diameter can be calculated
with FR, according to the formula:
1.9 x 107 x K x P
D =
n x FR
220
Where:
D
P
n
K
FR
= diameter of pulley, mm
= power requirement, kW
= motor speed, r /min
= belt tension factor, dependent on belt type and
type of duty. A common value for V belts is K=
2.5
= permissible radial force
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
Ball bearings
Length
of shaft
Motor
No. of extension
25,000 hours
40,000 hours
size
poles
E (mm)
FX0 (N)
FXmax(N)
FX0 (N)
FXmax(N)
56
20
240
200
260
200
56
20
300
200
280
200
56
6-8
20
340
280
340
280
63
2-4
30
490
400
490
400
71
2-6
30
680
570
680
570
80
2-6
40
930
750
930
750
90
2-6
50
1010
810
1010
810
100
2-6
60
2280
1800
2280
1800
M000145
Motor
size
25,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
56
63
71
470
790
985
230
390
485
520
865
1070
80
90
100
1305
1360
2805
705
930
1945
1420
1490
3075
FAZ
40,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
635
430
720
900
190
320
400
470
780
970
905
1165
2400
1185
1225
2540
585
800
1680
6-pole
FAD
N
FAZ
N
280
465
570
540
300
1135
820
1070
2215
1505
1590
3260
6-pole
FAD
N
FAZ
N
230
380
470
480
240
1020
520
1285
1335
2760
685
915
1900
1350
1415
2910
750
990
2050
40,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
6-pole
FAD
N
FAZ
N
190
310
385
470
790
985
230
370
455
480
240
1035
505
565
770
1625
1310
1370
2820
655
880
1840
1375
1450
2970
725
955
1990
FAZ
FAD
Mounting arrangement IM V1
Motor
size
25,000 hours
2-pole
FAD
FAZ
N
N
4-pole
FAD
N
FAZ
N
56
63
71
470
790
998
230
380
470
520
875
1085
80
90
100
1320
1390
2855
685
900
1890
1445
1525
3135
6-pole
FAD
N
FAZ
N
270
455
555
540
290
1150
620
430
725
910
790
1035
2155
1530
1625
3320
880
1130
2340
1200
1225
2590
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
221
Ordering information
Sample order
When placing an order, please state the following
minimum data in the order, as in the example.
Motor type
M3VD 80C
Pole number
2
Mounting arrangement (IM-code) IM B3 (IM 1001)
Rated output
1.4 kW
Product code
3GVD 081003-ASB
Variant codes if needed
D, E, F G
A
B
C
Motor type
Motor size
Product code
D Mounting arrangement code
E Voltage/frequency code
F Generation code
G Variant codes
Position 11
- (dash)
Position 3 and 4
Enclosure and stator frame material
A, V = Totally enclosed motor with aluminum stator
frame
Position 12
Mounting arrangement
A = Foot-mounted motor.
B = Flange-mounted motor.
Large flange with clearance holes.
C = Flange-mounted motor.
Small flange with threaded holes.
H = Foot- and flange-mounted motor.
Large flange with clearance holes.
J = Foot- and flange-mounted motor.
Small flange with threaded holes.
N = Flange-mounted (CI ring flange FF).
P = Foot- and flange-mounted motor.
(CI ring flange FF).
V = Flange-mounted motor. Special flange.
Position 4
Motor type
D = Single-phase motor - CSR
E = Single-phase motor - PSC
Positions 5 and 6
IEC size
05 = 56
06 = 63
07 = 71
08 = 80
09 = 90
10 = 100
Position 7
Speed (pole pairs)
1 = 2 poles
2 = 4 poles
3 = 6 poles
Positions 8 to10
Serial number
222
Position 13
Voltage/frequency code
S = 230-240 V 50 Hz.
X = Other rated voltage, connection or frequency.
Position 14
B, E = Generation code
The product code must be, if needed, followed by
variant codes.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
Type
designation
Product code
1)
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3AD
63
63
71
71
71
80
80
80
90
A
B
A
B
C
A
B
C
L
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3VD
M3AD
M3AD
M3AD
M3AD
63
63
71
71
71
80
80
80
90
90
90
100
A
B
A
B
C
A
B
C
S
L
LB
LA
2.2
M3AD 100 LB
IS
Torque
TN
TS
Tmax
Capasitor
Start
IN
Nm
TN
TN
Moment
Weight
of inertia kg
Run J=1/4 GD2
kgm2
F
230 V 50 Hz
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GAD
061001-B
061002-B
071001-B
071002-B
071003-B
081001-B
081002-B
081003-B
091202-E
2820
2820
2855
2860
2860
2860
2860
2860
2910
56.5
60.5
71.5
72.5
74.5
73.0
74.5
75.5
80.0
0.92
0.94
0.99
0.99
0.99
0.99
0.99
0.99
0.99
1.6
1.95
2.3
3.4
4.4
4.4
6.5
8.2
8.2
3.3
3.6
4.8
4.8
4.9
4.6
4.6
4.8
4.6
0.61
0.85
1.25
1.85
2.5
2
3.7
4.7
5
2.0
2.0
1.7
1.7
1.7
1.8
1.7
1.7
1.4
2.0
2.1
1.8
1.8
1.8
2.2
2.1
2.0
1.9
16
20
40
60
60
80
100
100
130
8
10
10
16
20
20
25
30
40
0.00016
0.00036
0.0004
0.00045
0.0005
0.00072
0.00076
0.00109
0.0019
5
5.5
6
7
7.5
9.5
11.5
12
13
230 V 50 Hz
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GVD
3GAD
3GAD
3GAD
3GAD
062001-B
062002-B
072001-B
072002-B
072003-B
082001-B
082002-B
082003-B
092201-E
092202-E
092203-E
102201-E
1350
1360
1410
1410
1410
1410
1410
1410
1420
1430
1430
1390
49.5
55.0
64.0
67.5
68.5
70.5
72.0
73.0
76.0
79.5
79.5
76.5
0.95
0.97
0.99
0.98
0.98
0.93
0.93
0.93
0.99
0.99
0.99
0.99
1.2
1.5
1.75
2.45
3.2
3.7
4.9
6.1
6.3
8.3
9.4
10.6
3.0
3.0
4.3
4.5
4.5
4.0
4.1
4.1
4.0
4.3
3.4
3.0
0.85
1.25
1.7
2.5
3.4
3.7
5.1
6.1
7.35
10
11.5
12.7
1.6
1.6
1.7
1.7
1.7
1.9
2.0
1.8
1.6
1.9
1.3
1.3
1.5
1.5
1.6
1.6
1.6
1.8
1.8
1.8
1.5
1.7
1.6
1.4
16
20
40
60
60
60
80
80
100
130
130
100
4
6
6
8
12
16
20
16
30
40
60
50
0.00026
0.0003
0.00066
0.00089
0.0011
0.00125
0.00156
0.00194
0.0032
0.0043
0.0048
0.0069
5
5.5
6
7
7.5
9.5
11
11.5
13
16
17
21
3GAD 102202-E
1400
79.5
0.99
12
3.2
15
1.2
1.5
80
50
0.00682
24
230 V 50 Hz
0.18
M3VD 71 A
3GVD 073001-B
880
52.0
0.99
1.5
2.8
1.95
1.5
1.3
20
10
0.00063
0.25
M3VD 71 B
3GVD 073002-B
880
59.0
0.99
1.9
3.0
2.7
1.5
1.3
40
12
0.00081
0.32
M3VD 71 C
3GVD 073003-B
880
61.0
0.99
2.3
3.0
3.5
1.5
1.3
40
16
0.0011
7.5
0.37
M3VD 80 A
3GVD 083001-B
900
65.0
0.97
2.6
3.0
3.9
1.8
1.5
40
12
0.00184
9.5
0.55
M3VD 80 B
3GVD 083002-B
900
66.0
0.97
3.8
3.1
5.8
1.8
1.5
40
20
0.00217
10.5
M3VD 80 C
3GVD 083003-B
900
67.5
0.97
4.3
3.2
6.9
1.8
1.5
60
25
0.00257
11.5
M3AD 90 L
3GAD 093202-E
930
71.0
0.96
5.4
3.9
8.65
1.7
1.4
80
25
0.0043
16
0.65
0.85
1)
1)
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
223
Type
designation
Product code
Torque
Capasitor
IS
TN
TS
Tmax
Run
IN
Nm
TN
TN
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
230 V 50 Hz
0.065
0.09
M3VE 56 A
M3VE 56 B
39.0
43.0
0.86
0.84
0.87 2.5
1.15 2.6
0.22
0.31
0.4
0.4
1.9
1.8
4
4
0.00011
0.00012
3.5
4
0.12
M3VE 56 BB
48.0
0.95
1.15 2.5
0.41
0.4
1.3
0.00012
0.18
M3VE 63 A
55.0
0.90
1.6
2.9
0.61
0.5
1.9
0.00016
0.25
M3VE 63 B
59.5
0.94
1.95 3.0
0.85
0.6
1.8
10
0.00036
5.5
0.37
M3VE 71 A
65.5
0.97
2.6
3.0
1.3
0.6
1.7
12
0.0004
M3VE
M3VE
M3VE
M3VE
M3VE
M3AE
3GVE
3GVE
3GVE
3GVE
3GVE
3GAE
67.5
68.5
68.5
70.5
72.0
76.5
0.97
0.97
0.96
0.96
0.97
0.99
3.7
4.3
5
5.8
7.4
8.7
3.0
3.2
3.5
3.7
3.9
4.2
1.95
2.25
2.6
3.1
3.75
5.1
0.6
0.6
0.4
0.5
0.4
0.4
1.7
1.7
1.6
1.6
1.7
2.0
16
20
20
25
30
40
0.00045
0.0005
0.00072
0.00076
0.00109
0.0024
7
7.5
9.5
11.5
12
16
0.55
0.65
0.75
0.9
1.1
1.5
1)
1)
71
71
80
80
80
90
B
C
A
B
C
L
071 002-B
071 003-B
081 001-B
081 002-B
081 003-B
091 102-E
2750
2750
2760
2775
2800
2850
230 V 50 Hz
0.065
M3VE 56 A
38.0
0.87
0.9
2.0
0.46
1.1
1.6
0.00018
0.09
M3VE 56 B
39.0
0.95
1.1
1.8
0.64
1.0
1.5
0.00018
0.12
M3VE 63 A
48.5
0.92
1.2
1.9
0.85
0.7
1.5
0.00026
0.18
M3VE 63 B
55.0
0.95
1.5
1.9
1.25
0.6
1.5
0.0003
5.5
0.25
M3VE 71 A
57.5
0.95
2.6
1.8
0.6
1.5
12
0.00066
0.3
M3VE 71 B
62.0
0.95
2.2
2.7
2.1
0.7
1.5
16
0.00089
0.37
M3VE 71 C
64.0
0.95
2.7
3.1
2.6
0.7
1.6
20
0.0011
7.5
0.55
M3VE 80 A
64.0
0.91
4.1
3.3
3.85
0.6
1.6
16
0.00125
9.5
0.65
M3VE 80 B
67.0
0.91
4.7
3.3
4.6
0.6
1.6
20
0.00156
11
1.3
M3AE 90 L
72.0
0.99
7.9
2.3
9.3
0.4
1.3
30
0.0043
16
1.5
M3AE 90 LB
73.0
0.99
2.3
10.6
0.4
1.3
40
0.0048
17
1.85
M3AE 100 LA
75.5
0.99
10.7 2.6
12.8
0.3
1.3
50
0.0069
21
2.2
M3AE 100 LB
78.5
0.99
12.2 3.1
14.9
0.3
1.6
50
0.0082
24
230 V 50 Hz
0.12
M3VE 71 A
45.0
0.96
1.25 1.8
1.35
0.8
1.3
0.00063
0.18
M3VE 71 B
48.0
0.96
1.7
1.9
2.1
0.8
1.4
10
0.00081
0.25
M3VE 71 C
51.5
0.96
2.2
1.9
2.8
0.8
1.4
12
0.0011
7.5
0.3
M3VE 80 A
56.5
0.91
2.5
2.5
3.2
0.7
1.5
12
0.00184
9.5
M3VE 80 B
58.5
0.92
2.5
3.9
0.7
1.5
12
0.00217
10.5
M3VE 80 C
59.5
0.90
4.5
2.5
0.7
1.4
16
0.00257
11.5
0.37
0.55
1)
1)
224
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
Type
designation
Product code
M3AE 90 S
M3AE 90 L
M3AE 90 L
Torque
Capasitor
IS
TN
TS
Run
IN
Nm
TN
Moment
of inertia
J=1/4 GD2
kgm2
Weight
kg
230 V 50 Hz
3GAE 092 201-E
3GAE 092 202-E
1360
1370
71.00
73.50
0.99
0.99
4.4
5.4
2.3
2.3
4.9
6.3
0.5
0.4
25
30
0.0032
0.0043
13
16
0.99
5.1
1.8
8.35
0.5
30
0.0043
16
230 V 50 Hz
3GAE 093 202-E
850
64.50
Rating plate
The standard rating plates is in aluminum. Rating plate
is available in stainless steel, see variant code 098.
Motor sizes 56 to 71
M000147
M000146
M000148
Motor size 80
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
225
Variant
Motor size
56-63
1)
71-80
90-100
Balancing
052
423
424
NA
NA
037
NA
NA
039
040
041
NA
NA
042
NA
057
058
NA
NA
NA
NA
63-series bearings.
NA
NA
059
188
NA
178
209
425
Cooling system
068
Metal fan.
NA
075
183
NA
Dimension drawing
141
Drain holes
066
Earthing bolt
067
External earthing bolt. Earthing screw for connection of external protective earth.
Heating elements
Motor size
Element capacity
56-71
8W
80-100
25 W
450
451
1)
226
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
Code
Variant
Motor size
56-63
1)
71-80
90-100
Insulation systems
014
008
009
047
IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5).
048
IM 3001 flange mounted, IEC flange, from IM 3601 (B5 from B14).
078
NA
NA
080
NA
NA
200
NA
217
NA
NA
218
NA
M (only 90)
219
NA
M (only 90)
220
NA
M (only 90)
223
NA
M (only 90)
224
NA
M (only 90)
226
NA
227
NA
233
NA
234
NA
243
NA
NA
M (only 100)
244
NA
NA
M (only 100)
Mounting arrangements
Painting
114
179
NA
NA
Protection
005
072
073
NA
158
211
Weather protected, IP xx W.
NA
NA
403
003
098
138
139
161
1)
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
227
Code
Variant
Motor size
56-63
1)
71-80
90-100
165
410
029
NA
NA
122
435
436
437
Terminal box
021
NA
136
137
180
NA
230
731
NA
Testing
146
Type test with report for motor from specific delivery batch.
147
Type test with report for motor from specific delivery batch,
customer witnessed.
148
149
NA
NA
221
Type test and multi-point load test with report for motor from
specific delivery batch.
222
760
762
1)
1)
228
S = Included as standard.
M = On modification of a stocked motor,
or on new manufacture,
the number per order may be limited.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
M000149
Flange-mounted motor
IM B5 (IM 3001), large flange
M000150
IM B3 (IM 1001)
Motor
size A
AA
AB
AC
AD
AE
BB
CA
CB
DA
DB
DC
EA
EG
EH
FA
56
63
71
80
90 S
90 L
100 L
90
100
112
125
140
140
160
18
26
24
28
27
27
32
108
120
136
154
170
170
197
110
120
130
150
177
177
197
110
110
125
130
140
135
155
72
72
85
97
110
110
110
71
80
90
100
100
125
140
85
96
110
125
125
150
172
36
40
45
50
56
56
63
78
71
78
80
81
81
91
7
8
10
12.5
12.5
12.5
16
9
11
14
19
24
24
28
9
11
11
14
14
14
19
M3
M4
M5
M6
M8
M8
M10
M3
M4
M4
M5
M5
M5
M6
20
23
30
40
50
50
60
20
23
23
30
30
30
40
9
10
13
16
19
19
22
9
10
10
13
12.5
12.5
19
3
4
5
6
8
8
8
3
4
4
5
5
5
6
Motor
size
56
63
71
80
90 S
90 L
100 L
G
7.2
8.5
11
15.5
20
20
24
GA
10.2
12.5
16
21.5
27
27
31
GB
7.2
8.5
8.5
11
11
11
15.5
GC
10.2
12.5
12.5
16
16
16
21.5
VA
30
36
35
37
43.5
43.5
47
VB
72
72
92
100
110
110
110
H
56
63
71
80
90
90
100
HA
8
10
9
10
10
10
12
HC
110
120
130
150
177
177
197
HD
159
171
176
190
217
217
237
IM B5 (IM 3001)
HE
71
76
63
67
82.5
82.5
92.5
K
5.8
7
7
10
10
10
12
KA
9
11
10
15
14
14
15
L
197
205
238
265
282
307
349
LC
225
237
266
300
317
342
394
UB
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
VC
26
26
22
26
33
33
33
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
12
10
10
11
100
115
130
165
165
165
215
80
95
110
130
130
130
180
120
140
160
200
200
200
200
7
10
10
12
12
12
15
3
3
3.5
3.5
3.5
3.5
4
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
10
13
13
14
65
75
85
100
115
115
130
50
60
70
80
95
95
110
80
90
105
120
140
140
160
M5
M5
M6
M6
M8
M8
M8
2.5
2.5
2.5
3
3
3
3.5
Tolerances
A, B
ISO js 14
C
0.8
D, DA
ISO j6
VD
53
53
57
61
67
67
67
F
H
N
ISO h9
+0 0.5
ISO j6
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
229
M000152
M000151
Motor
size A
AA
AB
AC
AD
AE
BB
CA
CB
DA
DB
DC
EA
EG
EH
FA
56
63
71
80
90 S
90 L
100 L
90
100
112
125
140
140
160
18
26
24
28
27
27
32
108
120
136
154
170
170
197
110
120
130
150
177
177
197
110
110
125
130
140
135
155
72
72
85
97
110
110
110
71
80
90
100
100
125
140
85
96
110
125
125
150
172
36
40
45
50
56
56
63
78
71
78
80
81
81
91
7
8
10
12.5
12.5
12.5
16
9
11
14
19
24
24
28
9
11
11
14
14
14
19
M3
M4
M5
M6
M8
M8
M10
M3
M4
M4
M5
M5
M5
M6
20
23
30
40
50
50
60
20
23
23
30
30
30
40
9
10
13
16
19
19
22
9
10
10
13
12.5
12.5
19
3
4
5
6
8
8
8
3
4
4
5
5
5
6
Motor
size
56
63
71
80
90 S
90 L
100 L
G
7.2
8.5
11
15.5
20
20
24
GA
10.2
12.5
16
21.5
27
27
31
GB
7.2
8.5
8.5
11
11
11
15.5
GC
10.2
12.5
12.5
16
16
16
21.5
VA
30
36
35
37
43.5
43.5
47
VB
72
72
92
100
110
110
110
H
56
63
71
80
90
90
100
HA
8
10
9
10
10
10
12
HC
110
120
130
150
177
177
197
HD
159
171
176
190
217
217
237
IM 2001, IM B35
HE
71
76
63
67
82.5
82.5
82.5
K
5.8
7
7
10
10
10
12
KA
9
11
10
15
14
14
15
L
197
205
238
265
282
307
349
LC
225
237
266
300
317
342
394
UB
Pg11
Pg11
Pg16
Pg16
M20x1.5
M20x1.5
M20x1.5
UC
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M25x1.5
M25x1.5
M25x1.5
VC
26
26
22
26
33
33
33
IM 2101, IM B34
Motor
size
HB
LA
Motor
size
HB
LA
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
12
10
10
11
100
115
130
165
165
165
215
80
95
110
130
130
130
180
120
140
160
200
200
200
250
7
10
10
12
12
12
15
3
3
3.5
3.5
3.5
3.5
4
56
63
71
80
90 S
90 L
100 L
103
108
105
110
127
127
137
10
10
10
10
13
13
14
65
75
85
100
115
115
130
50
60
70
80
95
95
110
80
90
105
120
140
140
160
M5
M5
M6
M6
M8
M8
M8
2.5
2.5
2.5
3
3
3
3.5
Tolerances
A, B ISO js 14
C
0.8
D, DA ISO j6
230
VD
53
53
57
61
67
67
67
F
H
N
ISO h9
+0 0.5
ISO j6
56
63
71
80
90
Material
Surface treatment
100
Surface treatment
D-end
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6304-2Z/C3
6205-2Z/C3
6306-2Z/C3
N-end
6201-2Z/C3
6201-2Z/C3
6202-2Z/C3
6203-2Z/C3
6204-2Z/C3
6205-2Z/C3
Axially locked
bearings
1)
1)
1)
1)
D-end
D-end
Bearing seals
D-end
V ring.
N-end
Labyrinth seal.
Bearings
1)
Lubrication
Terminal box
Connections
Surface treatment
Similar to stator.
Srews
Connection openings
4 x M16
Terminal box
Fan
Material
Fan hood
Material
Metal.
Stator winding
Material
Copper.
Impregnation
Insulation class
Insulation class F.
Material
Die-cast aluminum.
Rotor winding
Balancing method
Key ways
Heating elements
On request
4 x M20
8W
Drain holes
Standard.
Enclosure
IP 55.
Cooling method
IC 411.
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors / Single phase EN 12-2006
2 x (M25 + M20)
8
25 W
231
Notes:
232
Notes:
233
M000328
234
235
Austria
ABB AG
Clemens Holzmeisterstrasse 4
AT-1810 Wien
Tel: +43 (0) 1 601 090
Fax: +43 (0) 1 601 09 8305
Belgium
Asea Brown Boveri S.A.-N.V.
Hoge Wei 27
BE-1930 Zaventem
Tel: +32 (0) 2 718 6311
Fax: +32 (0) 2 718 6657
Canada
ABB Inc., BA Electrical Machines
10300 Henri-Bourassa Blvd, West,
Saint-Laurent, Quebec
Canada H4S 1N6
Tel: +1 514 832-6583
Fax: +1 514 332-0609
China*
ABB Shanghai Motors Co., Ltd.
88 Tianning Road
Minhang(Economical and Technological Development Zone)
200245 Shanghai
Tel: +86 21 5472 3133
Fax: +86 21 5472 5025
Chile
Asea Brown Boveri S.A.
P.O.Box 581-3
Santiago
Tel: +56 (0) 2 5447 100
Fax: +56 (0) 2 5447 405
Denmark
ABB A/S
Automation Products
Emil Neckelmanns Vej 14
DK-5220 Odense S
Tel: +45 65 47 70 70
Fax: +45 65 47 77 13
Finland*
ABB Oy
Motors
P.O.Box 633
FI-65101 Vaasa
Tel: +358 (0) 10 22 11
Fax: +358 (0) 10 22 47372
http://www.abb.com/motors&drives
http://online.abb.com/motors&drives
France
ABB Entrelec
ZA La Boisse BP 90145
300 Rue des Prs-Seigneurs
FR-01124 Montluel Cedex
Tel: +33 4 37 40 40 00
Fax: +33 4 37 40 40 72
Korea
ABB Korea Ltd.
7-9fl, Oksan Bldg., 157-33
Sungsung-dong, Kangnam-ku
Seoul
Tel: +82 2 528 2329
Fax: +82 2 528 2338
Sweden*
ABB Automation Technologies AB
LV Motors
SE-721 70 Vsters
Tel: +46 (0) 21 329 000
Fax: +46 (0) 21 329 140
Germany
ABB Automation Products GmbH
Motors & Drives
Wallstaedter Strasse 59
DE-68526 Ladenburg
Tel: +49 (0) 6203 717 717
Fax: + 49 (0) 6203 717 600
Malaysia
ABB Malaysia Sdn. Bhd.
Lot 608, Jalan SS 13/1K
47500 Subang Jaya, Selangor
Tel: +60 3 5628 4888
Fax: +60 3 5631 2926
Switzerland
ABB Schweiz AG
Normelec/CMC Components
Motors&Drives
Badenerstrasse 790
Postfach
CH-8048 Zrich
Tel: +41 (0) 58 586 0000
Fax: +41 (0) 58 586 0603
Hong Kong
ABB (Hong Kong) Ltd.
Tai Po Industrial Estate,
3 Dai Hei Street,
Tai Po, New Territories,
Hong Kong
Tel: +852 2929 3838
Fax: +852 2929 3505
India*
ABB Ltd.
32, Industrial Area, N.I.T
Faridabad 121 001
Tel: +91 (0) 129 502 3001
Fax: +91 (0) 129 502 3006
Indonesia
PT. ABB Sakti Industri
JL. Gajah Tunggal Km.1
Jatiuwung, Tangerang 15136
Banten, Indonesia
Tel: + 62 21 590 9955
Fax: + 62 21 590 0115 - 6
Ireland
Asea Brown Boveri Ltd
Components Division
Belgard Road
Tallaght, Dublin 24
Tel: +353 (0) 1 405 7300
Fax: +353 (0) 1 405 7327
Italy*
ABB SACE SpA
LV Motors
Via dell' Industria 18
IT-20010 Vittuone, Milano
Tel: +39 02 90341
Fax: +39 02 9034 7289
Japan
ABB K.K.
26-1 Cerulean Tower
Sakuragaoka-cho, Shibuya-ku
Tokyo 150-8512
Tel: +81 (0) 3 578 46251
Fax: +81 (0) 3 578 46260
Mexico
ABB Mxico, S.A. de C.V.
Apartado Postal 111
CP 54000 Tlalnepantla
Edo. de Mxico, Mxico
Tel: +52 5 328 1400
Fax: +52 5 390 3720
The Netherlands
ABB B.V.
Dept. LV motors (APP2R)
P.O.Box 301
NL-3000 AH Rotterdam
Tel: +31 (0) 10 4078 879
Fax: +31 (0) 10 4078 345
Norway
ABB AS
P.O.Box 154 Vollebekk
NO-0520 Oslo
Tel: +47 22 872 000
Fax: +47 22 872 541
Russia
ABB Industrial & Building Systems
Ltd.
Business Centre "Krugozor"
Obrucheva 30/1, Building 2
Moscow 117861
Tel: +7 495 960 2200, 956 93 93
Fax: +7 495 960 2209, 230 63 46
Singapore
ABB Industry Pte Ltd
2 Ayer Rajah Crescent
Singapore 139935
Tel: +65 6776 5711
Fax: +65 6778 0222
Spain*
Asea Brown Boveri, S.A.
Automation Products-Fbrica
Motores
P.O.Box 81
ES-08200 Sabadell
Tel: +34 93 728 8500
Fax: +34 93 728 8741
Taiwan
ABB Ltd.
6F, No. 126, Nanking East Road,
Section 4i
Taipei, 105 Taiwan, R.O.C.
Tel: +886 (0) 2 2577 6090
Fax: +886 (0) 2 2577 9467
Thailand
ABB Limited (Thailand)
161/1 SG Tower,
Soi Mahadlekluang 3,
Rajdamri, Bangkok 10330
Tel: +66 2 665 1000
Fax: +66 2 665 1042
The United Kingdom
ABB Ltd
Drives, Motors and Machines
Daresbury Park
Daresbury, Warrington
Cheshire, WA4 4BT
Tel: +44 (0) 1925 741 111
Fax: +44 (0) 1925 741 212
USA
ABB Inc.
Low Voltage Motors
16250 W. Glendale Drive
New Berlin, WI 53151
Tel: +1 262 785 3200
Fax: +1 262 780 8888
Venezuela
Asea Brown Boveri S.A.
P.O.Box 6649
Carmelitas,
Caracas 1010A
Tel: +58 (0) 2 238 2422
Fax: +58 (0) 2 239 6383
Australia
ABB Australia Pty Ltd
601 Blackburn Road
Notting Hill VIC 3168
Tel: +61 (0) 8544 0000
Fax: +61 (0) 8544 0001