Department of Mechanical Engineering, Faculty of Engineering
Chiang Mai University
SYLLABUS
Machine Design I (254325) First Semester of 2011
Class Meetings : 8:00-9:15,9:30-10:45,11:00-12:15 M,TH 3(3/3-0/0)
Course Description : Fundamental of mechanical design, properties of materials, theories of failure, impact. design of simple machine elements, rivets, screw fasteners, keys and pins, shafts, springs, power screws, coupling etc.; design project.
Text Book : 1) Budynas, Richard G. and Nissbett, J. Keith; Shigleys Mechanical Engineering Design (Ninth Edition in SI Units), McGraw-Hill, U.S.A. 2011 Reference Books : 1) Juvinall, Robert C. and Marshek, Kurt M. ; Fundamentals of Machine Component Design (Fourth Edition), John Wiley & Sons, Inc., U.S.A., 2006 2) Spotts, M.F. ; Design of Machine Elements (Fifth Edition), Prentice-Hall, U.S.A. 1978. 3) Esposito, Anthony and Thrower, Rebert J. ; Machine Design (Second Edition), Delmar Publichers Inc. U.S.A , 1991
Instructor : 1) Thawan Sucharitakul e-mail address: thawansu@yahoo.com 2) Det Damroagsak e-mail address: det@dome.eng.cmu.ac.th 3) Somchai Pattana e-mail address: s_pattana@yahoo.com Evaluation : Examination 100% (a) Mid-term Examination 50% Date : 3 August 2011 Time : 08:00-11:00 Contents : Week 1 to Week 7 (b) Final Examination 50% Date : 9 October 2011 Time : 12:00-15:00 Contents : Week 1 to Week 16
Minimum passing grade is 50% and grade assignments are done according to acceptable statistical methods. Eighty percent attendance is required for any grade other than F.
Course Schedule :
Week Contents 1 Chapter 1: Introduction 2 Chapter 3: Materials 3 Chapter 6: Failures Resulting from Static Loading (rev) 4 Chapter 6: Failures Resulting from Static Loading (rev) 5 Chapter 7: Fatigue 6 Chapter 7: Fatigue (continued) 7 Chapter 7: Fatigue (conclusion) 8 Chapter 8: Screws, Fasteners, and the Design of Nonpermanent Joints 9 Midterm Examination Week 10 Chapter 8: Screws, Fasteners, and the Design of Nonpermanent Joints (conclusion) 11 Chapter 9: Rivets 12 Chapter 10: Springs 13 Chapter 10: Springs (conclusion) 14 Chapter 18: Shafts, and Associated Parts 15 Chapter 18: Shafts, and Associated Parts (conclusion) 16 Design Project Case Study
NOTE: We reserve the right to make changes & corrections without notice.