Full support for key technologies (3G, GSM, CDMA2000)
Non-intrusive Spying - offers a real window on the interface
between handset and card Accelerate development and testing of handsets and cards (including protocol manipulation) Aspects SmartStation3 - Key Benets Collis is a member of GCF, 3GPP and ETSI Mobile Evolution Mobile phone technology has undergone many changes in recent years. Handsets ending up in consumers pockets these days possess much more complicated applications than before mostly revolving around the UICC. However implementation of new technologies involving the UICC is far from being straight forward. The complexity of the UICC interface means that it is essential that handsets and cards are tested thoroughly before being released in the eld. To undergo these tests, reliable, state-of-the-art test tools are need- ed. The Aspects SmartStation3 is a piece of hardware central to many of Collis products used by network operators, handset and card manu- facturers to debug, develop and test according to the latest standards. It enables you to simulate a card or mobile phone, or to spy the com- munication between the two. Smart Interface Aspects SmartStation3 acts as the communication interface between the handset and SIM or USIM card. It does so without interfering with or interrupting the communication. The Aspects SmartStation3 offers a window and a means of investigat- ing the communications between card and handset for spying, debugging and testing real or simulated cards or handsets. All of Aspects tools benet from the SmartStation3s capabilities. With the introduction of new UICC based technologies, such as Smart Card Web Server (SCWS), the inter- face with the UICC becomes more complicated. The Aspects Smart- Station3 enables you to effectively manage the challenges for the key UICC interface. The Aspects Smart- Station3 is compact, efcient, fast and exible. It is highly portable and can be instantly integrated into any test environment. Aspects SmartStation3 Aspects SmartStation3 Systems Under Test The Aspects SmartStation3 combined with Aspects tools create a testing or diagnostic environment which benets from Collis experience in the smart card and testing businesses. The main applications that the tools are used for are: Diagnostics - view, search and lter live or saved test sessions to understand errors on the application, protocol or electrical communications. Handset testing - simulate a card to create repeatable, reliable tests for taking a connected handset through its paces and thoroughly test its behaviour. Use Aspects test suites to verify that the handsets conform to specications. Card testing - The Aspects SmartStation3 is more than just a reader; it gives you full control over data and contact signal levels. It offers total testing exibility: build both positive and negative tests. Create your own repeatable tests from output from Aspects Spy Tools, or implement Aspects automated test suites. Real Devices The Aspects SmartStation3 works with real devices - a real SIM or USIM communicating with a real handset - as well as with simulated devices. It can even spy on purely simulated sessions. Simulations give you complete control over one side of the communication so that you can thoroughly debug or test the other side. Schematic view of possible set-up scenarios (Highlighted components may be real or simulated depending on what is being tested) Create your Testing Environment Create your Testing Environment (U)SIM Card Handset Aspects SmartStation3 Computer running relevant Aspects software Features Voltage: Supports 1.8, 3 and 5 Volt functionality Class A, B and C through the range of 1.5 5.75 Volts in 10mV steps. Standards: ISO/IEC 7816-1,2, 3, 4: SmartStation3 supports all relevant ISO features, ensuring that development products can be tested against the latest 3G, GSM, CDMA2000, TD-SCDMA and EMV with condence. Protocols: T=0 and T=1 Applications: 3G, GSM and EMV Clock Speeds: 1-20MHz congurable in steps of 10KHz with an accuracy of +- 1%. Specialised Hardware Specialised Hardware Data Rates: Different F and D values to give data rates up to 2.5Mbps. The SmartStation3 supports data rates beyond those specied in ISO 7816-3 - up to 2.5Mbps. (Calculation based on F=512, D=64 at 20MHz.) This provides support down to 8CLKs/ETU. Software: SmartStation3 Manager local installation and web interface. Supported Operating Systems: Windows 2000 or later Package Content: SmartStation3 hardware platform SmartStation3 Manager software Adaptor cables Aspects Spy - making use of Aspects SmartStation3 Build Condence in SIM and handset testing Contact Us Contact Us Product Range Aspects SmartStation3 (Hardware) (Ref Code:SS3-P1) Aspects SmartStation3 Manager (Software) (Ref Code:SS3M-P1) Additional Products Aspects Spy (Ref Code:AS-P1) Aspects Card Test Platform (Ref Code:ACTP-P1) Aspects Handset Test Platform (Ref Code:AHTP-P1) Training Introduction to Mobile Telecommunications About Collis Ensuring Trust in Technology Collis is the global market leader in the area of Secure Transaction Technology. We are a 150 people strong global organisation with its head ofce based in Leiden, the Netherlands. We have delivered signicant contributions to the Finance, Government, Transport and Mobile Telecom markets for over a decade. Collis Mobile Competence Centre (formerly known as Aspects Tools) specialises in consultancy, training and test tools for mobile phone, (U) SIM and NFC applications. We are involved in standards denition and work with ETSI/3GPP as well as with the Global Certication Forum and NFC Forum. Collis is an ISO 9001:2008 certied company. Contact Collis Great Britain Edinburgh, United Kingdom Tel: +44 131 225 9500 www.collisgb.com Collis Global/EMEA Leiden, The Netherlands Tel: +31 71 581 36 36 www.collis.nl Collis America St. Paul, MN, USA Tel: +1 651 925 5410 www.collisamerica.com Collis Asia Singapore Tel: +65 68 90 64 40 www.collisasia.com Collis Dubai Dubai, United Arab Emirates Tel: +971 50 674 2380 www.collisdubai.com 1 2 P B 0 9 A S S 3