Documente Academic
Documente Profesional
Documente Cultură
261/2 351/4
371/2
Pneumatic actuated 2
way diverter valve for
vacuum or low pressure*
conveying systems.
Available in Sizes
from 2” up to 12”
Standard Features
• Positive blade lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Active compression seal (ACS)
• Polished stainless steel blade
• Light weight aluminum Body construction
• Temperature rated for up to 82ºC (180ºF)
• Double acting or single acting spring return solenoid or manual lever valve
• NEMA 4 watertight & dust tight electrics
• Wall thicknesses of 16, 14 & 11 gauge, schedule 10, 40 & 80
• Fully tested prior to shipping
Options
• Position switches 110 volt AC & 24 volt DC • Manual hand wheel operation
• Proximity switches • Special seal configurations
• Oversized air cylinders • Solenoids 110 volt AC or 24 volt DC
• Valve body sealed for sir purging • NEMA 7-9 hazardous locations
(Class I, Groups B, C&D, Class II, Groups E, F, & G)
• Inlets/outlets - straight or flanged ends • High temperature modifications
“LSP” - Lightweight
Stud Pattern
Standard Features
• Positive blade lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Active compression seal (ACS)
• Polished stainless steel blade
• Light weight aluminum body construction
O O
• Temperature rated for up to 82 C (180 F)
• Double acting or single acting spring return solenoid
or Manual lever valve
• NEMA 4 watertight & dust tight electrics
• Wall thickness of 16, 14 & 11 gauge, schedule 10, 40 & 80
• Fully tested prior to shipping
"
!
1 1/2 OD 4 7/8 4 5 4 5/8 13 1/4 5 1 21/O
2DOD 4 7/8 2 7/8 5 4 5/8 13 1/4 5 4 3 7/8 5/16 - 18 NC 7/8
2 OD 4 7/8 4 5 4 5/8 13 1/4 5 2 32/1O
6DOD 4 7/8 2 7/8 5
6 4 5/8 13
5 1/4
8 5 4 3 7/8 5/16 - 18 NC 7/8
2 3/16 OD 4 7/8 4 6 5 15 1/8 5 2233//186OODD 4 7/8 2 7/8 6 5 15 1/8 5 4 3 7/8 5/16 - 18 NC 7/8
2 3/8 OD 4 7/8 4 6 5 15 1/8 5 3/2
8 OD
21 4 7/8 2 7/8 6 55
3/4 1516
1/8 5 4 3 7/8 5/16 - 18 NC 7/8
2 1/2 OD 4 7/8 4 6 5 3/4 16 5
1/8
27 2 OD 4 7/8 2 7/8 6 5 3/4 16 5 4 3 7/8 5/16 - 18 NC 7/8
2 7/8 OD 4 7/8 4 6 5 3/4 16 5
23
7/8
ODOD 4 7/8 2 7/8 6 5
637/4
8 16 5 4 35
7/8 5/16 - 18 NC 7/8
3 OD 4 7/8 4 6 5 7/8 16 5
33 OD
1/2 OD 4 7/8 2 7/8 6
7 6 7/8
7
5 7/8 10
2 6 5 4 5 5/16 - 18 NC 7/8
3 1/2 OD 4 7/8 6 7 7 7/8 20 5
34
1/2
ODOD 4 7/8 2 7/8 7 7 7/8 20 5 4
6 55
1/2 5/16 - 18 NC 7/8
4 OD 4 7/8 4 7 7 7/8 20 5
44 OD
1/2 OD 4 7/8 2 7/8 7
9 7
871/8
2 2220
1/2 5 6 5 1/2 5/16 - 18 NC 7/8
4 1/2 OD 4 7/8 6
5 9 8 1/2 22 1/2 5
45
1/2
ODOD 4 7/8 2 7/8 9 18011/2
/8 2224
1/2 5 6
8 5
6 1/2 5/16 - 18 NC 7/8
5 OD 4 7/8 5 9 10 1/8 24 5
5 95/1O
6DOD 4 7/8 2 7/8 190 10 1/8 24 5 8 6 1/2 5/16 - 18 NC 7/8
5 9/16 OD 4 7/8 5 190 10 1/8 24 5
5 96/1O
6DOD 4 7/8 2 7/8 190 0 1/8
11 2524
1/2 5 8 6 1/2
7 5/16 - 18 NC 7/8
6 OD 4 7/8 5 10 11 1/8 25 1/2 5
66 OD
5/8 OD 4 7/8 2 7/8 101 1112
1/8 53
26 1/4
2 5 8 7 1/2 5/16 - 18 NC 7/8
6 5/8 OD 4 7/8 7 11
10 12 26 3/4 5
68
5/8
ODOD 4 7/8 2 7/8 121
10 1412
1/8 2
3603
1/4
2 5 8 7
9 1/2 5/16 - 18 NC 7/8
8 OD 4 7/8 9 12 14 1/8 30 1/2 5
-('($& $+*'+-). /+ (*.(%& %(")&/&- +' ,(,& +- /0#& -('($& $+*'+-). /+ (*.(%& %(")&/&- +' ,(,& +- /0#&
!
9
10
2 1/2
12
2 1/2
Standard Features
• Positive Blade Lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Stainless steel 5/16” – 18 nc studs for mounting
• Active Compression Seals (ACS)
• 1/4” polyethylene gaskets included
• Polished stainless steel blade
• Light weight aluminum body construction
• Temperature rated for up to 82OC (180OF)
¼” Polyethelene Gasket
Standard Features
• Stainless steel material contact points
• Dust tight seals
• Lightweight aluminum frame, corrosion resistant
• Rated for 82oC (180oF)
Options
• 316 stainless material contact
• High temperature service
Square
Aluminum
construction
standard.
Available in sizes Round
from 6” up to 16”
Standard Features
• Hand crank or hand wheel actuation
• Polymer liner • Clear covers standard
• 304 stainless steel contact points &
polished stainless steel blade
• Narrow profile, lightweight aluminum frame
• Constant pressure woven Teflon seals
• Fully lined nylon interior
• Standard gate rated for 110o C (230o F)
• Fully tested prior to shipping
Options
• Air cylinders, hand wheel, electric or chain wheel actuation
• Solenoids - single or double acting 110 volt AC & 24 volt DC NEMA 4
(available NEMA 7 class 1, Groups B, C & D, class II Groups E, F, & G)
Aluminum
construction standard.
Available in sizes from 6” up to 30”
Standard Features
• Positive blade lock (PBL) between blade & cylinder rod
• Internal magnetic piston, cushioned air cylinder
• Polished stainless steel blade
• Narrow profile, light weight aluminum frame
• Adjustable nylon cam rollers for dust tight seal on blade
• Constant pressure nylon seals on blade
• Fully lined polymer interior
• Regular flange patterns or CEMA flanges to match screw conveyors
• Standard gate rated for 82o C (180o F)
• Fully tested prior to shipping
Regular
CEMA Flange
CEMA
Options
• Solenoids - single or double acting 110 volt AC & 24 volt DC NEMA 4
(available NEMA 7 class 1, groups B, C & D, class II groups E, F, & G)
• Oversized air cylinders
• Hand wheel, hand crank, electric or chain wheel actuation
• Position switches mounted on air cylinder NEMA 4, 110 volt AC & 24 volt DC
• High temperature modifications available
• Stainless steel
• Clear covers
Gravity Diverters
Sealed Units
Series "L"
Standard Features
• For dry gravity flow applications providing a seal to the atmosphere
• Sizes from 4” up to 30”
• Stainless steel, carbon steel & aluminum construction
• All valves come with square inlets and outlets standard
• Blade pocket protects leading edge of blade from wear and
directs flow of material away
• Suitable for up to 82o C (180o F)
• Replaceable active compression shaft seal and urethane blade seal
• Valves come standard with double acting, magnetic piston air cylinder
Options
• Square to round transitions available
• Removable door for cleaning & seal replacement (knobs optional)
• Solenoids - double or single acting
• High temperature modifications available
2-Way Sealed
Gravity Diverters
( 30o leg optional)
45O 45O
Dimensions
45o 45o
SIZE B C D E F G WT(apprx) SIZE B C D E F G WT(apprx)
4 9 7 1/2 16 11 7/8 51/4 53/8 40 (10ga) 4 15 1/4 8 15 1/4 4 1/2 11 3/8 12 3/8 50 (10 ga)
6 10 /4 1
9 18 7
13 /8 5 /4 3 3
6 /8 50 (10 ga) 6 18 9 3/4 19 4 3/4 13 3/4 14 1/2 65 (10 ga)
1 5 1 1 3
8 11 /2 1 1
10 /2 1
19 /2 3
15 /4 6 /4 1 1
7 /2 65 (10 ga) 8 21 11 /2 22 /8 5 /4 16 /4 16 /4 75 (10 ga)
12 14 1/4 13 26 1/2 20 7 3/4 9 1/4 95 (10 ga) 12 26 14 3/4 29 3/8 5 1/2 20 7/8 20 3/8 130 (10 ga)
1 3 1 3
14 15 3/4 14 1/2 27 1/4 22 1/8 8 1/2 10 1/4 120 (7 ga) 14 29 16 /2 32 /4 6 /8 23 /8 22 5/8 180 (7 ga)
16 17 16 30 1/8 24 9 11 3/8 140 (7 ga) 16 32 1/2 18 1/2 36 1/8 7 26 1/8 25 3/8 220 (7 ga)
18 19 19 34 1/2 26 3/4 9 1/2 13 1/2 160 (7 ga) 18 36 20 1/2 40 1/2 7 3/4 29 28 1/4 260 (7 ga)
20 21 /2 1
22 39 30 10 /2 1
15 /2 1
185 (7 ga) 20 39 1/2 22 1/2 44 3/4 8 1/2 31 7/8 31 300 (7 ga)
22 23 24 42 3/8 32 1/4 11 17 210 (7 ga) 22 43 24 1/2 48 1/2 9 3/8 34 5/8 33 7/8 350 (7 ga)
24 25 /2 1
29 1
49 /2 3
35 /4 11 20 /2 1
360 ( /4")1 24 46 1/2 27 53 3/8 9 1/4 38 1/8 36 1/4 500 (1/4")
26 27 31 53 38 11 /2 1
22 430 ( /4")1 26 50 29 57 1/8 10 41 39 800 (1/4")
28 29 33 56 3/8 40 5/8 12 1/2 23 3/8 500 (1/4") 28 53 31 60 7/8 10 7/8 43 7/8 41 3/8 900 (1/4")
7 7 7 5
30 301/2 35 593/4 427/8 13 243/4 570 (1/4") 30 54 31 /8 62 /8 9 /8 45 41 /8 1100 (1/4")
3-Way Sealed
30O Gravity Diverters 45O
H
H
E
E
FF
FF
G
G
G
G B
B
B
B E
E
C
C C
C
C
C
H
H
D
D
D
D
Dimensions
Size
A B C D E F G H WT. Material
Size
A B C D E F G H WT. Material
4 18 ¼ 9 24 7/8 17 5/8 18 16 ¼ 12 100 10 ga
4 15 ¼ 8 21 5/8 4½ 11 3/8 12 3/8 12 100 10 ga
6 20 ½ 10 ½ 29 5/8 20 5/8 21 18 13 3/4 150 10 ga
6 18 9 3/4 26 5/8 4 3/4 13 3/4 14½ 13 3/4 150 10 ga
8 24 12 ½ 35 3/8 24 5/8 25 21 15 3/4 200 10 ga 8 21 11 ½ 31 ½ 5¼ 16 ¼ 16 3/4 15 3/4 200 10 ga
16 35 20 3 8
57 / 39 / 5 8
40 30 26 525 3 16
/ 16 32 ½ 18 ½ 51 1/8 7 26 1/8 25 3/8 26 525 3 16
/
18 36 20 ½ 58 7 3/4 29 28 ¼ 28 600 3 16
/
18 38 ½ 22 65 3/4 43 5/8 44 33 28 600 3 16
/
Unsealed Gravity
Diverters
Series "B"
2 Way & 3 Way
Standard Features
A#9'/31+88#9++1 1:2/3/:2'7(43#9++143897:)9/43
A948/?+8A#9'3*'7*</9.74:3*/31+984:91+98
A '3:'1.'3*')9:'9/4347'/7)>1/3*+7)4397411+*
4 4
A43B-:7'9/438
#$A
&
A!59/438#41+34/*8 1/2/98</9).+8 86:'7+/31+984:91+98
&43B-:7'9/43 #$43B-:7'9/43
4 4
!59/438A11*/2+39/438/3/3).+8
8:(0+)994).'3-+A#9'3*'7*-':-+
@(4*>-':-+
@(1'*+:594@
A!;+7@-':-+
@(4*>-':-+@(1'*+
Standard Features
• Custom built automatic material transfer stations
• From multiple sources to multiple stations
• Eliminates hose stations, operator error & spills • Single piece units or separate cells
• Combine 2,3, & 4 way diverter valves and slide gates
• Can be manufactured as 1 unit or multiple units closer to source
• Can be hard piped or hoses used for flexibility and ease of maintenance
• Add purge valves for cleaning lines • Single piece units or separate cells • PLC Controlled Cabinets
Line Controllers
Gravity V Diverter
Series “G”
For Gravity Flow Applications
Standard Features
• Stainless steel material contact points • Dust tight seals
• Lightweight aluminum frame, corrosion resistant
• Choice of stainless, aluminum and carbon inlets and outlets
• 60o configuration standard -45o optional
• No internal ledges for product to collect• Rated for 82oC (180oF)
Gravity V Diverter
For Gravity Flow Applications
Options
• 316 stainless material contact
• High temperature service
• Hand wheel or crank, electric actuation
• Single and double solenoids
• Variable and infinite positioning controls
Pneumatic actuated
diverter valve for vacuum or
low pressure* conveying systems.
Standard Features
• Stainless steel material contact points
• Lightweight aluminum frame, corrosion resistant
• Positive blade lock (PBL) between blade and cylinder rod
• Active compression seals (ACS)
• Internal magnetic piston cushioned air cylinder
• Stacking design for multiple conveying lines
• Rated for 82oC (180oF)
Options
• 316 stainless material contact points
• High temperature service
Standard Features
• Sizes from 6” to 24”
• Heavy duty carbon steel construction
• Standard magnetic piston cushioned air cylinder
• 45 degree off leg standard
• Access door for maintenance and inspection of valve
Options
• 30 degree off leg
• Hand wheel/lever or chain wheel actuators
• Square to round transitions • High temperature kits
• Dead pocket detector • Interior polymer liners
• Pocketed liner • Solenoids & position switches
Options
• AR Plate Blade
• Square to round transitions • Hi Temp Kits
• Internal magnetic cushioned air cylinder
• Solenoids & position switches • Hand lever, chain wheel
Options
Valves & Gates
• NEMA 4 water/dust
tight enclosure end
mounted on air cylinder.
• Comes complete with
all wires, fittings and
connections, simply
bring power and air
supply to box
and unit is ready.
Options
Valves & Gates
Air-Purged Body
c/w Gauge & Regulator
Details
• Comes with metal panel enclosure (NEMA 4,X) • Option NEMA 7-9
• On-Off switch standard • Uses relays 110 volt AC or 24 volt DC
• Pre-wired terminal box required if mounted more than 9 ft (3 m) from valve
(specify distance)
Moveable variable
position switch
Details
• Comes with metal enclosure (NEMA 4,X) with
3 lighted push buttons
• Option NEMA 7-9 • On-Off switch standard
• Uses programmable relay 110 volt AC or 24 volt DC
• Operates from closed to open then centre or open to closed then centre
• Variable position is manually adjustable by moving centre position switch
• Pre-wired terminal box required if mounted more than 9 ft (3 m)
from valve (specify distance)
Available on slide gates, roller gates
Available on
slide gates,
roller gates
Details
• Infinite position controls allow for gate to be open to a
specified opening size*
• 110 volt AC or 24 volt DC, NEMA 4 enclosure operates by PLC
• On & off selector switch
• Rotary position control switch on panel controls opening of valve
(can be wired directly to a PLC)
Application Chart
Valve Type Series Sizes Pressure Gravity Vacuum Mounting Actuator
Slide Flex 2 Way & 3 Way p 2”-8” • • horiz/vert Air, Hand, Electric
Gravity Diverter Unsealed 2 Way & 3 Way B 3”-14” • horiz Air, Hand Lever
Warranty
Lorenz has a limited warranty on
air cylinders and solenoids
for 24 months
Any modifications to any valve other than recommended maintenance voids the warranty.
Lorenz warrants to the original buyer only that all products or parts sold by Lorenz shall
be free of defects in materials and workmanship for a period of one (1) year from the
date of shipment, when used according to Lorenz recommended usages. This warranty
is strictly limited to repair, replacement of defective parts, provided those products are
returned to Lorenz prepaid. Labour and materials for any downtime/repair/replacement
is not covered. This warranty shall be considered void if such products are misused,
improperly installed, improperly stored, operated beyond rate limitations, damaged,
neglected, altered/changed/repaired or modified by anyone other than Lorenz or
designate. Lorenz assumes no responsibility for any emissions from our valves.
All special order products or material are not returnable. No liability is assumed for
consequential damages or for any labour or other expense incurred by reason of sale
or use of our products, singularly or in combination with other products. To the best
of our ability products will be delivered at specific times but no liability is assumed
for failure to deliver because of delays or defaults occasioned directly or indirectly by
fire, flood, act of God, labour trouble or shortage or any cause unavoidable beyond
our reasonable contract.
Goods remain the property of the seller until payment is received in full and purchaser
acknowledges in full that this is a security agreement and a document to this effect
may be registered according to the local and applicable legislation or there shall be a
charge for the full purchase price on the goods. All special order products or material
are not returnable.