100%(1)100% au considerat acest document util (1 vot)
851 vizualizări15 pagini
This document details the design of a beam to column moment connection according to AISC standards. It provides:
1) Geometric data for the connection, including bolt sizes, plate thicknesses, and dimensions.
2) Material properties and design forces for the beam, column, and bolts.
3) Calculations to check: a) bolt shear and tension, b) required plate thickness, c) weld sizes, d) need for column stiffeners, and e) shear in the column web.
4) The document concludes that the connection design is adequate except that the stiffener thickness needs to be increased.
This document details the design of a beam to column moment connection according to AISC standards. It provides:
1) Geometric data for the connection, including bolt sizes, plate thicknesses, and dimensions.
2) Material properties and design forces for the beam, column, and bolts.
3) Calculations to check: a) bolt shear and tension, b) required plate thickness, c) weld sizes, d) need for column stiffeners, and e) shear in the column web.
4) The document concludes that the connection design is adequate except that the stiffener thickness needs to be increased.
This document details the design of a beam to column moment connection according to AISC standards. It provides:
1) Geometric data for the connection, including bolt sizes, plate thicknesses, and dimensions.
2) Material properties and design forces for the beam, column, and bolts.
3) Calculations to check: a) bolt shear and tension, b) required plate thickness, c) weld sizes, d) need for column stiffeners, and e) shear in the column web.
4) The document concludes that the connection design is adequate except that the stiffener thickness needs to be increased.
BEAM ID: 2007 DESIGN OF BEAM TO COLUMN MOMENT CONNECTIONS (acc. to AISC EDICIN 9 PGS 4-116 A 4-122) BEAM ID: 2007 GEOMETRIC DATA FOR CONNECTION: Total bolt number = 8.00 Bolts distances (cm): Number of bolts in Tension= 4.00 a= 4.00 Bolt diameter to be used ,dbo (mm)= 25.00 Pf= 4.00 Bolt area (cm2)= 5.00 b= 6.50 Thickness of head plate(mm)= 19 c= 32.00 Total lengh of head plate(cm)= 61 d= 4.00 Width of head plate(cm)= 23 gh= 15.00 (see Note 1) Effective width of head plate (cm)= 21.5 gv= 10.50 (see Note 2) =(bfb beam + 2.5 cm) Note 1: recomended 9 cm if tfc <= 13 mm and 10 cm if tfc>13 mm Nota 2:recomended 9 cm mn. if tfc <= 13 mm and 10 cm mn. if tfc>13 mm DATA OF BEAM AND COLUMN TO BE CONNECTED: db beam (cm)= 45.00 dc col (cm)= 35.00 bfb beam (cm)= 19.00 cfw col (cm)= 30.00 tfb beam (cm)= 1.46 tfc col (cm)= 1.75 twb beam (cm)= 0.94 twc col (cm)= 1.00 k (cm)= 4.4 T (cm)= 26.2 MATERIALS: Bolts: Fv allow(k/cm2)= DESIGN FORCES: Steel: Axial force (T(+)/C(-)),(kg)= 352.00 Fy(k/cm2)= Shear (V),(kg)= 3784.00 Fu(k/cm2)= Weldements: Bending Moment (M),(k-m)= 11581.00 Fv (k/cm2)= Is a load comb. with earthquake or wind? (YES=1,NO=0): 1 a)Forces on beam flanges (kg): 26774.53 (tension flange) 26422.53 (compression flange) b)Stresses acting on bolts: Shear stress (fv),(k/cm2)= 94.60 Allowable shear stress (Fv),(k/cm2)= 1973.33 OK! Tension stress (ft max),(k/cm2)= 1338.73 Allowable tension stress (Ft),(k/cm2)= 4110.00 OK! c)Clculation of Head Plate thickness: Pe=Pf - dbo/4, (cm)= 3.38 Ca= 1.13 Cb= ( bfb/bep)^1/2= 0.94 Af ,(cm2)= 27.74 Aw,(cm2)= 39.5552 Cm=CaCb(Af/Aw)^1/3*(Pe/dbo)^1/4= 1.02 Me=Cm Ft Pe/4, (kg-cm)= 22982.08 tep req= (6Me/eff. width.*0.75Fy)^1/2,(cm)= 1.60 required thk USE HEAD PLATE THICKNESS tep,(cm)= 1.9 d)Flange of beam-head plate weldment (it must support max.tension on beam flange): l weld = 39.98 cm t weld= 0.48 cm USE WELD. THICNESS MIN. w,(cm)= 0.60 e)Beam web-head plate weldement (it must support max. tension due to bending in beam web 0.6Fy): l weld = 84.16 cm t weld= 0.67 cm USE WELD. THICNESS MIN. w,(cm)= 0.70 f)Check of Column stiffeners: Pbf: compression force in flange. Value shall be multiplied by 4/3 if earthquake or wind loads act or by 5/3 if includes only live and dead loads. Pbf (kg)= 35230.04 Ductility of web column failure: Pbf<=twc.Fy.(tfb+6k+2tep+2w)= 82150 kg No stiffener required Buckling of column web fairure: Pbf<=34400.twc^3*(Fy)^(1/2) / T= 65648.85496 kg No stiffener required Bending of column flange failure: Pbf<=6,25.tfc^2.Fy= 47851.5625 kg No stiffener required g)Stiffeners dimensions: Ast=(Pbf-Fy.twc.(tfb+6k+2tep+2w))/Fy = Use minimun dimensions cm2 Stiffener Length= dc col-2tfc-.5= 31.00 cm Stiffener Width , brig=(cfw-twc)/2- 0.5 = 14.00 cm trig= tfb beam (recomended)= 1.46 cm brig/trig<=800/(Fy)^(1/2) ----->trig (mnimum)= 0.88 cm Ast used= 45.26 cm2 Increase stiffener thickness Weldement of stiffeners= 7.72 mm h)Shear failure of column web: twc>=2,67.M/(Abc*Fy) Abc=(dc col-tfc)*(db beam-tfb) Abc= 1447.71 cm2 2,67.M/(Abc.Fy)= 0.85 cm Reinforcement of column web not needed A-325 1480.00 A36 2500.00 3700.00 E70 1480.00 (compression flange) 11.5 700 -16200 -16200 -28150 -35500 523024.29 523024.29 427972.82 373081.85 966750 OK! No cumple OK! No cumple. Aumentar espesor plancha o numero de pernos OK! Stiffener Required No stiffener required Use minimun dimensions OK! Increase stiffener thickness Reinforce column web Reinforcement of column web not needed 17.886762 -78.756327 17.886762