Documente Academic
Documente Profesional
Documente Cultură
Schco | 9
Schco MSE 210 accessories
MSE 210 On-Roof Mounting System Schco | 10
Trapezoidal bracket Single trapezoidal bracket Double trapezoidal bracket
Material for
trapezoidal bracket
Aluminium Material Aluminium Material Aluminium
Material for sealing tape Polyurethane foam Diameter of hole 6.8 mm Diameter of hole 6.8 mm
Length x width x height 83 x 40 x 8 mm
Packing unit 50 Art. No. 256 039 Packing unit 50 Art. No. 259 930 Packing unit 50 Art. No. 259 733
Cruciform bracket Cruciform bracket Cable duct
Suitable for
mounting rail
BP 170 V, BP 165 H Suitable for mounting rail
BP 085 S, BP 130 S,
BP 160 S, BP 215 S
Material Aluminium Material Aluminium Material Aluminium
Includes screws Length x width x height 83 x 40 x 8 mm Length 200 mm
Packing unit 20 Art. No. 259 716 Packing unit 50 Art. No. 249 743 Packing unit 50 Art. No. 256 041
OneTurn 18 OneTurn 22 Anti-slip kit
Material Stainless steel Material Stainless steel Material Aluminium
Size M8 x 18 mm Size M8 x 22 mm Length x width x height 25 x 18.4 x 10 mm
Packing unit 20 Art. No. 256 494 Packing unit 20 Art. No. 256 040 Packing unit 20 Art. No. 249 580
100 Art. No. 256 495 100 Art. No. 256 511
500 Art. No. 256 887 500 Art. No. 256 512
Anti-slip device for frame type 3 PV module clip Laminate anti-slip device
Material Aluminium Material Aluminium Material Aluminium
Length x width x height 20 x 20 x 15 mm Length x width 80 x 50 mm Adjustment from 250 mm to 300 mm
Packing unit 50 Art. No. 257 117 Packing unit Aluminium, mill finish Width 40 mm
50 Art. No. 221 201 Packing unit 50 Art. No. 256 718
Packing unit Anodised black
50 Art. No. 231079
Connector kit Connection kit Anti-slip device
Profle material Aluminium Material for coupling profile Aluminium Material for anchor blocks Aluminium
Punching screw material Stainless steel M8 20 Punching screw material
Stainless steel
M8 20
Length x width height 94 x 18.4 x 10 mm Length x width x height 94 x 18.4 x 10 mm Size M8 20
Packing unit 4 Art. No. 257 105 Packing unit 4 Art. No. 256 191 Packing unit 10 Art. No. 256 022
50 Art. No. 257 106 50 Art. No. 249 581
Schco On-Roof Mounting System MSE 210
The right solution for type of installation
Cable duct
The cable duct allows the
cables to be kept clean and in
place under the modules and
along the mounting rails. The
cable duct can also be installed
subsequently to keep the cables
in order.
The emphasis here when laying
the connecting cables is on
reducing the risk of accidents
with inadvertently separated DC
cables.
MSE 210 On-Roof Mounting System Schco | 5
Installation on trapezoidal corrugations
Trapezoidal bracket
For load-bearing roof coverings
without tiles. A PV installation
with trapezoidal brackets can be
mounted particularly quickly and
cost-effectively on roof coverings
with trapezoidal corrugations
with suffcient load-bearing
capacity. The trapezoidal brackets
are screwed directly onto the roof
covering. The mounting rails can
be pushed directly onto the
trapezoidal brackets. Due
to the low height above the
roof covering and the direct
attachment of the system,
the mounted installation will
effectively withstand wind
and snow loads. For use in
conjunction with mounting rail
BP 030 T, there are two special
trapezoidal brackets for faster
installation: single trapezoidal
brackets and double trapezoidal
brackets.
Connector
Allows the connection of single
mounting rails and compensates
for the thermal expansion of the
mounting rails. The connection
is via a "sliding" and a "fxed
bearing".
The connector does not fulfl any
structural function.
Connector kit
Suitable for attaching short
mounting rail sections of up to
250 mm in length. They are
attached using two punching
screws (M8 x 14). After
installation, this connection is a
"fxed bearing".
The connector kit does not
fulfl any structural function.
Mounting rail connection with connector
Cable guide with the cable duct
Cruciform bracket
Cruciform bracket
For a particularly quick and
effcient cruciform installation.
The cruciform bracket to be
installed on one side only has
been specially developed to
connect mounting rail BP 170 V
and mounting rail BP 165 H.
Therefore, a crossover can be
created with a high level of pre-
assembly.
Schco International KG
www.schueco.com 87640/04.10/Printed in Germany
Schco Your partner for windows and
solar products
As leading innovator in system-based construction,
Schco supplies components for the entire building
envelope, including specialised software solutions
for design, construction, calculation and fabrication.
Aluminium systems
Steel systems
PVC-U systems
Solar products
Schco Design
Schco MSE 210 on-roof mounting
Schco MSE 210, fast,
secure and durable installation
The Schco MSE 210 mounting
system offers maximum
fexibility during installation and
is also particularly easy to use
with a minimum of individual
components. PV modules from
other fabricators can be installed
securely in simple installation
steps. The exclusive use of
stainless steel or
aluminium means that all
components are weather-
resistant with a long service life.
Schco MSE 210 installation
components are fully compatible
and can be used fexibly, as the
units are available in optimum
sizes for every structural
requirement.