0 evaluări0% au considerat acest document util (0 voturi)
83 vizualizări2 pagini
NSDB Circuit Inventory Gateway provides REACT with the capability to interface with the NSDB system over TCIS / TOPCOM. The HDI Multiplexer module release 1.000 can be used with the interface to fetch circuits from multiple NSDB systems from a single instance of the interface.
NSDB Circuit Inventory Gateway provides REACT with the capability to interface with the NSDB system over TCIS / TOPCOM. The HDI Multiplexer module release 1.000 can be used with the interface to fetch circuits from multiple NSDB systems from a single instance of the interface.
NSDB Circuit Inventory Gateway provides REACT with the capability to interface with the NSDB system over TCIS / TOPCOM. The HDI Multiplexer module release 1.000 can be used with the interface to fetch circuits from multiple NSDB systems from a single instance of the interface.
The NSDB Circuit Inventory Gateway provides REACT with the capability to interface with the NSDB system over TCIS/TOPCOM. The following enhancements have been included in this release: Provided support for multiple installations on the same platform to connect to more than one NSDB system (one-to-one relationship between the instance of the interface and the NSDB system) Increased buffer size for multipoint circuits Provided a cron job to restart the NSDB server and FCIF parser as needed Added a REACT config.sys option HNIS_CKTS which specifies whether the circuit access code (CAC) or circuit layout order (CLO) request types are supported Added REACT config.sys options to enable the database server timeout to be independent from all other timeouts in REACT - DB_SERVER_COMM_TO_HDI_TIMEOUT (Sets database server communication to Hekimian Database Interface [HDI]) - GUI_COMM_TO_DB_SERVER_TIMEOUT (Sets GUI communication to the database server) NOTE: The GUI_COMM_TO_DB_TIMEOUT cannot be less than the DB_SERVER_COMM_TO_HDI_TIMEOUT. Additionally, the HDI Multiplexer Module Release 1.000 can be used with the NSDB Circuit Inventory Gateway to fetch circuits from multiple NSDB systems from a single instance of the interface. With this module, REACT sends a circuit request through the HDI Multiplexer, which is configured to broadcast the circuit request to multiple NSDB systems. If only one circuit is returned, the circuit is displayed in the REACT GUI. If multiple circuits are returned, the circuit that matches the requested circuit ID is displayed in the REACT GUI. PIR 1274 NSDB Circuit Inventory Gateway Data Flow For further information on NSDB Circuit Inventory Gateway 1.000, contact your account manager or call Client Services at 1-301-590-3500 or 1-800-321-0780. 2002 Spirent Communications of Rockville, Inc. All of the company names and/or brands and/or product names referred to in this document, in particular the name "Spirent" and its logo device are either registered trademarks or trademarks pending registration in accordance with relevant national laws. All rights reserved. Specifications subject to change without notice. 4. The TCIS server retrieves the circuit in FCIF format from the NSDB source. 5. The TCIS server sends the data to the NSDB Gateway Server. 8. The HDI circuit message is returned to the requesting OSS. 3. The request is forwarded to the NSDB gateway server, which sends the request to the TCIS server via TOPCOM. 1. Spirents OSS requests a circuit. 2. The HDI circuit request is sent to the FCIF Parser. 6. The circuit data is forwarded to the FCIF Parser. 7. The FCIF Parser receives the circuit data and generates a circuit message in HDI format 15200 Omega Drive Rockville, MD 20850-3240 Toll-free: 877.oss.test Tel: 301.590.3600 Fax: 301.590.3698 www.spirentcom.com hekimian@spirentcom.com 0202