Documente Academic
Documente Profesional
Documente Cultură
3223 mineral
processing aid
CYQUEST
indicates a
Registered Trademark in the United States and
the or * indicates a Trademark in the United
States. The mark may also be registered, the
subject of an application for registration or a
trademark in other countries.
Talk to Cytec about mining chemicals.
CYQUEST, PAGE 2
Selection of Products
The molecular geometry of CYQUEST 3223 has been designed to
satisfy most operating conditions.
Treatment Level
Recommended use .01 to 1 lb/ton (5 to 500 g/metric ton) solids.
Typical Properties
CYQUEST 3223
Mineral Processing Aid
Appearance Straw-colored liquid
Solids 50%
Specific Gravity 1.35
pH, as is 12 to 13
Viscosity, as is 5000 to 6000 cps
Freezing Point Forms a glass
BOD5, g O2/kg 10
COD, g O2/kg 900
Handling and Storage
CYQUEST 3223 mineral processing aid can be stored at temperature
ranges of 40F-90F (5-30C). Because of the viscosity of CYQUEST
3223 mineral processing aid, Cytec recommends that it be used at 60F
(16C) or higher to facilitate pouring. Freezing this product or heating it
to a temperature of 200F (95C), while not recommended, will not
harm its performance. After thawing, mix thoroughly before use.
CYQUEST 3223 mineral processing aid can be stored in and fed with
cast iron equipment.
Shipping
CYQUEST 3223 mineral processing aid is available in 55 gallon
(209 liter) nonreturnable lined steel drums and in 2,200-lb totes.
Technical Service
Effective mill management depends on using the best products with
the latest technology in a totally balanced format. Cytec offers a
complete system of products: collectors, frothers, flocculants,
dispersants, depressants and filtering aids. Your Cytec Sales
Representative is prepared with information and backed by technical
service to aid you in applying our products.
Note: Before handling this material, read the appropriate Cytec
Material Safety Data Sheets: MSDS 0000602 for more detailed
information on physical properties and safety, health and environ-
mental data.
Updated 11/23/04 MCT-1035