Documente Academic
Documente Profesional
Documente Cultură
Bearing Protection
Patented
Thenewstandard for reliability
GBS Face Seals
seal out virtually
all external sources
of contamination
for maximum
protection.
Labyrinth Seals
for long-term,
cost-effective
protection
in less demanding
applications.
Break the cycle
of downtime
caused by lip seal
related failures.
Keep all your
equipment
up and running
without repetitive
bearing failures.
ISO 9001
CERTIFIED
Break the cycle
of lip seal related downtime!
Extend pump MTBPM
Bearing
Protection
CHESTERTON
Bearing wear
accelerated by
contaminants.
Shaft endplay
and runout increase,
vibration is transmitted
along shaft.
Vibration
progressively
damages
mechanical seal.
Mechanical seal fails
prematurely. Bearings
will have to be replaced
and shaft repaired.
New lip seal is installed.
It begins to progressively
wear out from the
first day of operation.
Lip seal wear
combined with shaft
grooving admits
contaminants into
bearing chamber.
Break the cycle
of downt ime
caused by lip seal
related failures
I Positively seals out all external sources of contamination.
I Will not fret,wear or damage shafts.
I Minimizes lubricant additions to bearing housings.
I No venting required,can be used with breather plug
or expansion chamber.
I Self lubricating,narrow,carbon face can run dry,
generates low heat,will not harm oil.
I Holds positive pressure up to 15 psi (1bar)
in bearing housing. Friction drive rotary stays in place.
I Sizes from 0.875" to 4.5" (25100 mm)shaft diameter.
I Metal Components:Aluminum.
Patented
I Where immersion of the equipment may occur.
I Where moisture is continuous or condensing.
I Where hermetic sealing of the bearing chamber is required.
I Where oil levels approach the shaft diameter,
requiring positive containment.
A Rot ary face
B Posit ive drive O- ring
C Seal housing
D Ret ainer
E St at ionary face
F Spring
G Secondary O- ring
H Excluder ring
Patented
installation method
sets calculated spring
pressure automatically
E
D
C
F
G
H
B
A
I Tortuous path labyrinth
with hooded design
prevents direct penetration
of liquid or dirt.
I Non-contacting and
non-wearing parts
for virtually unlimited life.
I Designed to withstand
direct spray of 70 psi (5 bar)
water for 45 minutes with
no detectable leakage
into bearing frame.
I Gravity drain allows
liquid entering labyrinth
to safely drain.
I Internal oil drain returns
oil to bearing frame.
I Positive O-Ring shaft drive on rotary element.
I No shaft speed limitation
the higher the shaft speed,the better it works.
I Sizes from 0.875" to 4.5" (25110 mm)shaft diameter.
I Metal Components: Nickel plated steel and 316SS.
Labyrinth Seal
CHESTERTON
Labyrinth Seals
SHAFT
DIAMETER
INCH
SHAFT
DIAMETER
METRIC/mm
HOUSINGBOREDIAMETER
HOUSINGBOREDIAMETER
WITHMOUNTINGRING
WITHOUT
MTG.RING
HOUSINGBOREDIAMETER
25 47 52 55 56 62
30 47 52 55 56 62
35 52 56 62
38 55 60 62
40 60
42 62 72
45 65 72
50 68 72 80
55 78 85
60 80 85 90
65 82 88 90 95
70 90 100
75 100 105 115
80 100 105 115
85 105 110
87 105 110
95 115
100 120 125 130 135
0.875 1.500 1.625 1.750 1.875 2.000
1.000 1.625 1.750 1.875 2.000 2.125
1.125 1.750 1.875 2.000 2.125 2.250
1.250 1.875 2.000 2.125 2.250 2.375
1.375 2.000 2.125 2.250 2.375 2.500
1.500 2.125 2.250 2.375 2.500 2.625
1.625 2.250 2.375 2.500 2.625 2.750
1.750 2.375 2.500 2.625 2.750 2.875
1.875 2.500 2.625 2.750 2.875 3.000
2.000 2.625 2.750 2.875 3.000 3.125
2.125 2.750 2.875 3.000 3.125 3.250
2.250 2.875 3.000 3.125 3.250 3.375
2.375 3.000 3.125 3.250 3.375 3.500
2.500 3.125 3.250 3.375 3.500 3.625
2.625 3.375 3.500 3.625 3.750 3.875
2.750 3.500 3.625 3.750 3.875 4.000
2.875 3.625 3.750 3.875 4.000 4.125
3.000 3.750 3.875 4.000 4.125 4.250
3.250 4.000 4.125 4.250 4.375 4.500
3.375 4.125 4.250 4.375 4.500 4.625
3.500 4.250 4.375 4.500 4.625 4.750
3.750 4.500 4.625 4.750 4.875 5.000
4.000 4.750 5.000 5.250 5.500 5.750
4.500 5.250 5.375 5.500 5.625 5.750
SHAFT
DIAMETER
INCH
CHESTERTON