Documente Academic
Documente Profesional
Documente Cultură
-,
Instruction Manual
7" PORTABLE DVD COMPATIBLE PLAYER
WITH TV TUNER
MODELNO.:SC·491
~
I
• o
IMPORTANT INSTRUCTIONS ':~ .•.. fRf~A!lI10N~
-TO PROLONG USE TIME, PLEASE MAKE SURE THE INTERVAL OF
~AEfIY IN~IR!l~I1QN~ SWITCHING ON AND OFF IS NOT LESS THAN 5 SECONDS.
-PROTECT THE POWER CORD FROM BEING WALKED ON OR
A ~
I. • •.
A PINCHED,
R!=,CEPTACLES,
PRODUCT.
PARTICULARLY AT PLUGS,
AND THE POINT WHERE
CONVENIENCE
THEY EXITTHE
USING OF POWER:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. -DO NOT CONNECT TO POWER OVER PRESCRIPTIVE VOLTAGE,
DO NOT REMOVE COVER (OR BACK). USE THE CORRECT VOLTAGE AND CURRENT MARKED ON THE
NO USER SERVICEABLE PARTS INSIDE. PRODUCT ELECTRICAL RATINGS LABEL. ELECTRIC POWER
USE THE RECOMMENDED ACCESSORIES ONLY. OVERLOAD WILL CAUSE FIRE OR ELECTRIC SHOCK.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. -DO NOT PULL CABLES ,SHOULD HOLD PLUG WHEN USING
/ POWER SOCKET.
The graphic symbols on the back cover of the set mean the following:
The lighting flash with arrowhead symbol within an equilateral triangle is
£
-UNPLUG AC CABLE FROM POWER SOCKET IF NOT USE THE
Z intended to alert the user to the presence of uninsulated dangerous voltage.
- UNIT FOR LONG TIME.
~ Within the product's enclosure, there may be full of sufficient magnitude to
constitute a risk of electric shock to persons.
BATTERY USAGE AND HANDING:
&
-KEEP BATTERY AWAY FROM CHILDREN AND PETS.
The exclamation point within an equilateral triangle is intended to alert the
-REMOVE THE BATTERY FROM THE REMOTE CONTROL WHEN
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
THE PRODUCT WILL NOT BE USED FOR AN EXTENDED PERIOD.
-NEVER THROW BATTERY INTO A FIRE. DO NOT EXPOSE
WARNING:
BATTERY TO FIRE OR OTHER HEAT SOURCES.
-TO AVOID THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PLAYER RAIN OR MOISTURE. AND DO NOT CLOSE FEATURES
TO FIRE, HEAT SOURCES,
-KEEP GOOD VENTILATION OF THE PRODUCT AND AC ADAPTER. 7" TFT DISPLAY
-DISCONNECT FROM POWER SOURCE DURING LIGHTNING This player has a built-in 7" TFT display window, to provide clear vision, and low radiation.
STORM, OUT FOR LONG TIME OR DOING KINDS OF
AUTO TV SCANNING FUNCTION
CONNECTIONS.
-HAVE THE PRODUCT UNPLUGGED FROM THE POWER SOURCE BUILT-IN LITHIUM BATTERY
[i BEFORE CLEANING RELOCATING OR SERVICING.
MEMORY FUNCTION
This set employs an optical laser beam system in the CD mechanism designed MULTI-SUBTITLES FUNCTlON(OSD)
FULL REMOTE
GUIDE DISPLAY
CONTROL FUNCTION
qualified service personnel. The laser mechanism in the set corresponds to the
stylus (needle) of a record player. Although this product uses a laser pick-up
BUILT-IN STAND HOLDER
lens, it is completely safe when operated according to directions.
1:.,
" ~
•
CARD READER/USB COMPATIBLE FUNCTION
Compatible with USB/SD/MMC/MS card for this player. containing files in VCD/SVCD/DVD/
MUSIC/WMAIVIDEO/JPEG/CD compatible also. TABLE OF CONTENTS
(NOTE: This unit cannot connect with the removable HDD.
OPERATIONS 11·26
ACCESSORIES
EOR R£'E£.R£.NC~~
Remote
control
with
battery
.........1
~;.
Telescoping
;J AV.O'b.~
~~~::~;~
SPECiFiCATIONS
MAINTENANCE
TROUBLESHOOTING
·
.,
Instruction
~
AC adaptor
................. 1
A
\
Cigarette
~~~~~~~
..1
ma[l~:""1
.-:::-::-,
., . ~
..
..
All the pictures in the instruction manual are just for your reference. specification should
refer to actual accessories.
3 4
. ~
•
GENERAL PARTS AND CONTROLS BACKV/EW
MAIN UNII
FRONT VIEW SIDE VIEW
13 I ~
I -' I 20. Stand Holder
2 •• 0
'.1.'4' 4
!ii
,i-I'"
.
::.
I ~I'.I '1,·,·,)=12
PUSH
14
15
16
17
3' '
NOTE: You must connect
RfMOIECONIBOL
external antenna to the unit before TV receiver operation.
5 6
"--,
•
21.GO TO button- Press this button to set the player to play disc starting at a certain point.
~.R~~hi!rg~i!Ql
e B i!H~el.J.!.~~
22.STOP button-Press this button to halt playing.
23.PLAY/PAUSE button- Press this button to start or pause playing the disc. The player with a built-in rechargeable Lithium battery.
24.PREV button-Press this button to play the previous chapter(for DVD mode) or track(for 1.Charge the battery
VCD/CD mode). -Connect the adaptor to the DC 12V IN jack, then set the unit in POWER ON mode(THE
2S.NEXT button-Press this button to play the next chapter(for DVD mode) or track(for PLAYING MODE)for fully charge.
-Set in POWER ON mode but press the STANDBY button (THE STANDBY MODE) or
VCD/CD mode).
set in POWER OFF mode for fully charge.
26.A-B button-Press this button to repeat playing sections between two specific points (A-B).
And the indicator is red during charging; it gets green when charging is completed.
27.REPEAT button-Press this button to repeat playing one chapter or one title (for DVD
2.Time to recharge the battery
mode) or repeat playing the current track or the whole tracks (for VCD/CD mode).
Recharge and playback time depends on battery pack capacity and the temperature condition.
2a.ZOOM button-Press this button to enlarge picture size, max.to X 4 or to shrink picture
Generally speaking, the battery needs to be charged about 5 hours in POWER OFF mode
size, min. to X1I4.
And about 7 hours in PLAYING mode.
29.PROGRAM button -Press this button to setup the memory order of chapter or title
3.Using and Maintaining Rechargeable Battery
(for DVD mode) or tracks (for VCD/CD mode).
- The normal working condition temperature is: 0 -45 ;
3D.SETUP button -Press this button to enter initial settings menu( in DVD mode).
- Always unplug ACIDC power supply for the unit whenever not playing.
31.0K button-Press this button to confirm what you have selected.
32.Navigation buttons -Press this button to move up, down, left or right. NOTE: A new battery pack which has not been used or one which has not been used for more
33.MUTE-To mute the sound. than a month, may appear to not recharged enough, this is due to the characteristic of this
34. VOLUME - button- Press this button to turn down the volume. battery and is not a malfunction. In this case, recharge it two or three times before the first
3S.VOLUME + button- Press this button to turn up the volume. use, and it needs more than 8 hours to recharge battery.
Noises may be generated during recharging. In this case, use a more distant power socket.
Do not recharge or discharge battery near a heating element such as a heater or direct
B'ASIC CONNECTION sunlight.
• Ensure all the cables are disconnected from the main unit before connecting to AC ~~~ONNf~T EXIfRNA1..ANIfNNATO UNlI
power source by AC power adaptor. Install external antenna into antenna jack for best picture .
• Read through the instructions before connecting other equipment.
Ensure that this player and other equipment to be connected are set to the standby mode or
off and disconnect the AC adaptor before commencing connection.
L~ONNf~IlNG TO AC POWfR SO.!JR~f Do not block ventilation holes of equipment and arrange them so that air can circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting audio and video cables.
Note:
When playing disc, the TV volume may be at a lower level than during TV broadcasts, etc.
If this is the case, adjust the volume to the desired level.
If the player is connected to the TV through a video cassette recorder, the picture may not be
Main unit
To DC IN 9-12V jack played back normally with some disc. If this is the case,do not connect the player via the VCR.
!n§!Sl!lJhe antenna
To power outlet
NOTE: Screw the supplied Antenna securely
Before connecting to AC power, push the clockwise into the ANT jack located
POWER ON/OFF switch to OFF. on the right side of the unit. (The
direction as the left picture shown)
7 8
" ~
••
~~~ONNE~IlNG TOA TV SEI REMOTE CONTROL PREPARATION
TV set
B8IIERY IN~TAht,8IlON
Install the battery as the follow picture. Be sure negative and positive terminals are
positioned as indicated in the battery compartment.(Fig1 )
L
To audio input/output connectors (red, white)
-The battery normally last tor about one year although this depends on how often, and
Video/audio cable for how often the remote control is used. •
-If the remote control fails to work even when it is operated near the player, replace the
~
~,' >Hi" Ii ",,~;o'y
o_~~~~
battery.
-Use one size CR2025 battery.
,m1
~'iII'iHii""""""",~,'·,iM_..t.t:.o _ SENSOR
sensor and within about 60'ofthe front
of the player(Fig2).
~~~Qnn~~tingJ~~(J~rn!!~ign~~Q!!r~~~ ~
G)
-- ~ D·" 0
""' PUSH
NOTE:
-The operating distance may vary
30' 30 0
.. p
Connect the headphone to phone jack. simultaneously operating the remote t,
2. Adjust the volume to the level that you want . control of any other equipment."
r;;
,,'
!,!'}f!F!.::<Iit~:
tl_
.~
• _. '"
•.'
Phone
9 10
" ~
•
MAKE SURE ALL THE EQUIPMENTS AND AC ADAPTOR ARE 3.Skipping ahead or back, ;
CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE
BEFORE KINDS OF OPERATIONS.(THE MODE DEFAULT IN TV MODE)
OPERATIONS
Skipping ahead
Press NEXT ~ button during playa chapter
(foe OVO modo) or a track Ifor Video COICO modo)
is skipped each time the button is pressed.
Skipping back
Press PREV I+( button during playa chapter
I H (!l;)
'
(!l;) I
(for DVD mode) or a track (for Video CD/CD mode) •
is skipped each time the button is pressed.
Press SWITCH button to switch the mode in DVD mode
Ii
1.Basic play 1-'
:.,
4.Rapid advance(Rapid
During playback, press FF ~ button or
FR ••• button to fast forward/rewind.
reverse)
•.•.•• @
Past torward
FF8X
··0
CJ
FF15X (3J2X
1. Press the" PUSH" to open the disc cover. Press PLAY button to resume normal play.
I
D
~.Gl). ax ..~ "" Fast::.~kwa'd~~~
LJGi)··G)··~
I 5.Pause or play
2. Place a disc onto the disc compartment. Hold the disc without touching either of its
surfaces, position it with the printed title side facing up, align it with the guides, and place it
in its proper position.
3. Close the disc cover, after closing the disc cover, play begins. The player starts to read
During playback,.press PLAY/PAUSE HI button,
the play will be paused, To resume normal play,
press PLAY button.
CJ ~I:- ~I
the disc immediately. I 6.Music playback
4. When a menu screen appears on the TV, move the navigation buttons or press the numeric 1. Insert the disc containing the files with Music bit rate indicator
buttons to select preferred track number, then press OK button to confirm. music format to be played and after a few
seconds, the screen of the monitor will show
1 WHAT WILL I DO all the folders on the disc:
2HEARMECRY I •...
3WITHOUTYOU ~I WfTHOUTYOU 2. Select the folder you want to play by the
4 MOVE CLOSER
navigation buttons and press the OK
button to confirm.
5.When the menu continues onto another screen, press NEXT button to view the next screen, 3. The files in this folder are displayed and
or press PREV button to, skip to previous screen. select the desired song by navigation buttons,
NOTE: Due to the different design of some software titles, N EXT button may not always work. then press the PLAY button to start playback.
6.To stop play and return to the menu screen, press TITLE button, or MENU button. 4. Press NEXT or PREV button to turn the
current menu page to the next or previous orsr
menu page. Current'media file type
5. Press REPEAT button to change play mode.
- SINGLE: play one file only.
2.Stopping play - REPEAT ONE: repeat one file.
- REPEAT FOLDER: all the files in the folder will be played repeatedly.
Press the STOP button to stop playing a disc. - FOLDER: all the files in the folder will be played
NOTE: When player is stopped, the player records the point where STOP was pressed - SHUFFLE: All the files will be randomly sorted and played by the order.
(RESUME function). Press PLAY again, playback will resume from this point. When the - RANDOM: randomly select any file to play.
tray is Opened or STOP is pressed again, the RESUME function will be cleared(for DVD
compatible disc only).
11 12
.,
•••
,.
.. (0
7.Movie compatible playback Slide show effects
1. Insert the disc containinq the files with movie lit..
Playback indicator
Press PROGRAM button to select one of the
format to be played and after a few seconds, Current filelTotal files /) effects when changing from one picture to
the screen of the monitor will show all the another:
folders on the disc: roo~oo-o;oo---- [][) J
• t~01l124" 1 WIPE TOP "
2. Select the folder you want to play by the Current L iii_~~SW=E:=A:::R=======; 2 WIPE BOTTOM
navigation buttons and press the OK folder 3 WIPE LEFT
button to confirm. [ill KING 4 WIPE RIGHT
T
3. The files in this folder are displayed and ~ :~GAHCTE /) 5 DIAGONAL WIPE LEFT TOP
select the desired file by navigation buttons, [ill LIVE 6 DIAGONAL WIPE RIGHT TOP
7 DIAGONAL WIPE LEFT BOTTOM
then press the PLAY button to start playback. [ill LILY
8 DIAGONAL WIPE RIGHT BOTTOM
4. Press NEXT or PREV button, the player will [ill SECRET 9 EXTEND FROM CENTRE H
DISC 10 EXTEND FROM CENTRE V
play the next or previous file.
5. Press REPEAT button to change play mode. Current'media file type 11 COMPRESS TO CENTER H
12 COMPRESS TO CENTER V
- SINGLE: play one file only.
E.i~!Yre Shrin!slZQQffi 13 WINDOWH
- REPEAT ONE: repeat one file. 14 WINDOWV
- REPEAT ALL: all the files in the folder will be played repeatedly. Press ZOOM button to enter the zoom 15 WIPE FROM EDGE TO CENTRE
- REPEAT OFF: no files in the folder will be played repeatedly. mode 16 MOVE IN FROM TOP
- SHUFFLE: all the files will be randomly sorted and played by the order. Press FF or FRbutton to enlarge or shrink 17 NONE
- RAN DOM : randomly select any file to play. picture to 50%,75%,100%, 125%, 150% and
-6. Press DVD MENU button to exit 200% .
00
navig~tion buttons and press OK button to - SINGLE: play one file only.
confirm. - REPEAT ONE: repeat one file.
The files in this folder are displayed and - REPEAT FOLDER: all the files in the folder • When playing the disc with PSC, then player
select your pictures by using the up/down will be played repeatedly.
will show the version and PSC status
- FOLDER: all the files in the folder will
navigation buttons and press OK button to on the screen.
be played.
start playback. Thumbnail of picture will be
displayed while you scrolling across the file ~!SiQJo n~~1lIH~yiQY~i~!Yr~ • After a few seconds, a menu will appear on
name. Press NEXT button to skip to the next picture If the picture is enlarged, you may press the screen.
or PREV button to skip to the previous picture. the navigation buttons to pan across other
If no key is pressed for 5 seconds, it will skip portions of the picture.
to next picture automatically. 1 WHAT WILL I DO
2 HEAR ME CRY
3 WITHOUT YOU
BQ!~Hn9...Qi~!yr~§. 4 MOVE CLOSER
Press RIGHT navigation button to rotate
13 14
-
,.,.
• '0
12.0n screen display information
1O.Compatible USB Playback
Press OSO button to display playing information.
1.lnsert compatible USB memory stick containing the files in Music, picture or movie
format to be played. Compatible DVD disc Compatible VCD disc
, i I i.T.., I rl ,;;;.---~
2.Press button of USB/CAROIDVO to switch the unit in USB reader mode.
3.After several seconds, all the folders in the memory stick will display on monitor screen.
4. Select a folder you want to play using the
Compatible CD disc
navigation buttons and press the OK
button to confirm.
5.The files in this folder are displayed and IF YOU SELECT MUSIC FILE TO PLAY:
select the desired file by navigation buttons, Bitrate
indicator
then press the OK button to start to play.
6.Press NEXT or PREY button to turn the
* .• ±
current menu page to the next or previous
menu page.
7.Press REPEAT button to set repeat playing
1;+ .• EqU~"lzerlndlcalor
l
mode. MUSIC
13.Program play
- SHUFFLE: All the files will be randomly
sorted and played by the order.
[:=J ------1
[:=J -------1
J~
[:=J ------2 The player plays the files in an desired order.
- RANDOM: randomly select any file to PROGRAM: CHAPTER/TRACK(01-00)
play. [:=J -------1 1. Press PROGRAM button and the screen will ITJ_ m.;
- SINGLE: play one file only.
- REPEAT ONE: repeat one file.
[:=J ------2
[:=J ------2
display the program menu.
2. Press navigation buttons to choose memory index III [JjJ
EiS- Sj-
- REPEAT FOLDER: all the files in the folder and then press OK button to start input. 1Kl_ [j]j]_
will be played repeatedly. Enter desired titles/chapters numbers by using the Exit lliD
Here will show the current media file type
- FOLDER: all the files in the folder will be numeric buttons. The selected titles/
played NOTE: This unit can not connect with the chapters are stored into the memory. Select ~I on the menu to see the next page. Up to 20
removable tray.
11.Compatible CARD Playback memories can be stored.
NOTE: Leading zero is not necessary. If the track number is more than 10, press the 10+ key
1.[nsert the memory card(compatible with SOl first and then the unit digit.
MMC/MS) containing the files to be played.
(Compatible VCD/SVCDIDVO/WMA/movie/
( 00:00 00:00 CIJ J Example: Track 12, press"1 0+" and then "2"
0021006 Track'Zt , press"1 0+" twice and then "1"
JPEG CD format.) 3. Select START on the menu and press OK button to start program play or select EXIT
I"\BELLE\ )
2.Press the button of USB/CAROIDVO to switch IIi' i on the menu and press OK button to exit without program play.
the unit in CARD reader mode. [QJ ALAN 4. To stop the program, press PROGRAM button select STOP on the menu, then press
3.After several seconds, all the folders in the
CARD will display on monitor screen:
[Q] BUZZ OK button.
4. Select a folder you want to play by using the [QJ CANDY
navigation buttons and press the OK [QJ DIANA
button to confirm. 14.Repeat play
5.The files in this folder display and select the
desired file by navigation buttons, then press
the OK button to start playback.
6. Press NEXT or PREY button to turn the Here will show the current media file type
(1 Press REPEAT button during play, it will repeat play one chapter
OVD disc), or repeat play track (compatible for VCO/CO disc).
or one title (compatible
.
for
current menu page to the next or previous 9.Press DVD MENU button to return files list Compatible for DVD DISC Compatible for VCD/CD DISC
menu page.
7. Press REPEAT button to change repeat
playing mode.
-SHUFFLE: All the files will be randomly
sorted and played by the order.
menu.
10.Press right/left button to rotate the image
clockwise/ counter-clockwise
playback.
11.Press up/ down button to flip
during photo
the image
J I b CHAPTER I
Repeat chapter L:J
(In the PBC OFF mode)
b TRACK
. Repeat track
L:J
- RANDOM: randomly select any file to play. vertically/ horizontally during photo playback.
- SINGLE: play one file only. ' 12.Press ZOOM button to enter the zoom Repeat title
LJ
- REPEAT ONE: repeat one file. mode:
- REPEAT FOLDER: all the files in the folder -Press FF button to enlarge picture to 100%,
LJ
Repeat disc
will be played repeatedly. 125%, 150% and 200%
- FOLDER: all the files in the folder will be -Press FR button to shrink pictures to 50%,
75%, and 100%
played. Repeatall
8. Press STOP button when playing, then you
will enter preview mode.
15 16
- ~
•
A-B repeat play 19.1nitial Settings
Repeating sections between two specific 2.1 SPEAKER SETUP - it is used to set the
Once the initial programming is entered it is speaker Output levels i
points(A-B repeat)
retained in memory until changed, the player can Options: LT/RT-LeftiRight mix mode
1. Press A-B REPEAT butto,n during play at the point where repeat play is to be started(A}.
always be operated under the same conditions.
2. Press A-B REPEAT button at the point where repeat play is to be ended(B}. Repeat play of STEREO - Select this option if
the selection between points A and B starts. . Common procedure for initial settings you don't Have a 2.1 channel amplifier.
'3. PressA-B REPEAT button once again to return to normal play. V SURR- It is used to set dum
1.Press SETUP button.
my surrounding audio effectiveness.
2. Use the navigation buttons to select preferred
15_GO TO item, and press OK button, each screen
for setting the value is displayed. Then move 2.2 EQUALIZER SETUP - It is used to
Pre ss.G'O TO button, the screen will display a bar, then you can press numeric buttons
and enter a point directly (a time/chapter / track), the disc will play from the the navigation button to set the item and press compensate for frequency distortion to
selected point. Press GO TO button again to exit the menu. OK button to confirm the settings. improve its frequency response in audio
3.Press SETUP button to close setup menu in systems(not applicable}.
any mode. Options:EQ TYPE-It is for selecting the
16_Changing subtitle language (for DVD compatible only) 4.Use left navigation button to switch to another Equalizer Type, in this unit, you can choose
It is possible to change the subtitle language to main setup items Mono, Rock, Pop, Live, Dance, Techno,
a different language from the one selected at CHANGING SUBTITLE LANGUAGE
1.GENERAL SET UP Classic or Soft.
the initial settings.( This operation works only
with discs on which multiple subtitle
languages are recorded}
1.Press SUBTITLE button during play, the
screen will display the current language.
I"'""'' ' ' '"' ' ' I
NOTE: When no subtitles
.L:J
are recorded,
1.1 TV TYPE - colour system of the TV selecting.
1.2 TV DISPLAY - it is for selecting TV output mode.
Options: Normal/PS: Pan & scan mode
Normal/ LB: Letter box mode
BASS BOOST- It is used to turn the Bass
Boost ON or OFF.
SUPER BASS- It is used to turn the Super
Bass ON or OFF.
TREBLE BOOST- It is used to turn the
2. Press SUBTITLE button again to change press this button will not work. Wide: 16:9 wide screen mode
language or turn off. Treble Boost ON or OFF.
1.3 OSD LANG - It is used to choose the desired
language for different user. In this player, you
can choose English or other languages.
17_Z00M PLAY 1.4 CAPTIONS - It is used to switch the caption
This function allows you to enjoy a motion
picture.
• Press ZOOM button when playing, the screen
1 ;y2X~1 ;y3XH ;y4X1 ON/OFF when playing disc.
1.5 SCREEN SAVER - when the player is not in
use for 5 minutes, screen saver will appear on
shows as right:
+ the screen.
• Press NAVIGATION button to scroll across the
enlarged picture. 1 ~I ;y'14 j"3 H. j1f21
Options: On: Screen saver is enabled
Off: Screen saver is disabled
1.6 DEFAULT - It is used to reset to factory
settings.
18.Changing audio soundtrack language(for DVDIVCD/CD
compatible disc) ·2. AUDIO SETUP
It is possible to change the audio soundtrack language to a different language from the one
selected at the initial settings (This operation works only with discs on which multiple audio
soundtrack languages are recorded) .
• PressAUDIO button while playing DVD compatible disc the screen will display the number
of current soundtrack languages,pressing the button again will change the language.
• Pressing AUDIO button while playing VCD/CD compatible disc will change audio output
mode: Mono Left, Mono Right, Mix-mono and Stereo soundtrack.
NOTE: When no soundtrack languages are recorded, pressing this button will not
work.When the power is turned on or the disc is removed, the language heard is the
one selected at the initial settings.
1.7 1"8
..•.
•
'"
TV INFO(INFORMA TlON)
It is used to display current program information.
Press SWITCH button to switch the mode in TV mode -Press INFO button, the screen will display as below:
LS~AN SIGNAL
-Make sure that all connections are perfectly. Current channel no ~ In!l ~ Ilifl.la"ermm ~soundtrack mode
-Switch the unit to on.
-Later the screen will display as below: Resolution
Current calendar
&time
CC(CLOSED CAPTION)
It is used to set the caption mode.
-Press CC button, the screen will display as below:
-Press left or right button to select YES to start to scan channel signal.
-Effective channel will be memorized automatically.
-Then the channel first stored will be play.
NOTE:
1.You must scan channel before the first watching, or there is no program shown:
2.You can press the MENU/OK button on the front panel of unit for three seconds to exit the
AUTO SCAN page. I Qi'jtliQJ ,t!tu I
\
MUTE CONTROL
Press the Mute button to mute the sound, press it again to switch ON the sound.
NOTE: When the unit is in Mute mode, pressing VOL+ button will switch ON the sound and
turn it up, pressing VOL- button will keep the TV silence and turn down the sound.
19 20
' . ••
••
3.MAIN MENU 2. AUDIO SETUP
Press left or right button to enter audio setup page:
• The unit contains different setting menus. Once the initial programming is entered it is
retained in memory until changed, the TV can always be operated under the same
conditions.
" The settings will be retained in the memory until the settings are changed.
2.Use the left or right button to select preferred page, each page for setting the value will
display. Then move the up or down button to set.
, 3. TIME SETUP
Press left or right button to enter time setup page:
-When the menu displays on the screen, press the TV MENU button again to exit.
-Press EXIT to exit all menus.
Picture mode
OSD Duration
Press up or down button to select it ,then press left or right button to set the picture mode
-Select it and press left or right button to set the OSD display time as 15/30/45/60 Seconds.
as Personal, Standard, Dynamic or Soft.
ContrastlBrightnesslSharpnesslTintlCo/or
-Press up or down button to select ContrastiBrightness/Sharpness/Color,then press left or
right button to adjust..
-The ContrastiBrightness/Sharpness/Color can be adjusted from 0-100.
-The Tint can be adjusted from -50 to 50.
21 22
'I
•• 10
Sleep Timer Zoom Mode
-Select it and press left or right button to switch the timer function off or set different sleep -it is used to set the display mode in Wide/Normal.
time. -Press up or down button to select it and press left/right button to adjust it.
-The sleep time can be set as 15/30/60/90/120/180/240 Min. by pressing left or right button.
(The TV will be in standby mode automatically in a period of time you set, and when the time
Closed Caption
leave 1 minute, there will spring a dialog window to count down and remind you)
-It is used to set the caption mode.
I 59 TO POWER OFF 1 -Press up or down button to select it and press OK button to get in setting page:
Time Zone
-Press up or down button to select it and press left or right button to set the time zone
according to the zone that you are in.
-Options: Eastern/ Central/ Mountain/ Pacific/ Alaska/ Hawaii
Clock
- The clock can display the time of current digital TV program source when the unit is in
digital TV mode.
CC Mode-Press up or down button to select it and press left or right button to set the caption
mode as Off or On.
Basic Selection-Press up or down button to select it and press left or right button to set as
4. OPTION SETUP desired,
Advanced Selection-Press up or down button to select it and press left or right button to set as
Press left or right button to enter time setup page:
desired.
Restore Default
-It is used to reset to factory settings.
-Press up or down button to select it and press OK button to confirm, then the screen
displays as below:
Menu Language(OSD)
-Press up or down button to select it and press left or right button to change the OSD language.
-Options: English or other languages. It depends on the software.
Color Mode
-Press left or right button to select YES or NO, and then press OK to confirm,
-Press up or down button to select it and press left or right button to change the color mode.
-Options: Normal/Warm/Cool.
23 24
"
.. o
5. CHANNEL SETUP Favorite
Press left or right button to enter setup page: -Press up or down button to select it and press OK button to set your favorite channel. -r-,
Antenna
It is used to set the type of signal reception.
-Press up or down button to select it and then press left or right button to set.
-Options: TV setting
Auto Scan
Before normal watching you must search effective channel first.
-Press up or down button to selectit and press OK to get in scanning setup page:
-You can edit more than one programs as favorite programs by this option. Once a
program is chosen, a mark will appear in its favorite blank.
Channel NO.
It is used to swap settings between two channels.
-Press OK button to start to scan programs. -Press up or down button to select it.
-Press the left button to swap the current channel number with the previous channel's.
- Press the right button to swap the current channel number withthe next channel's.
CHANNEL LABEL
-lt is used to set the channel label as desired.
-Press up or down button to select and press OK to enter:
Show/Hide
It is used to show or hide the channel.
-Press up or down button to select it and press OK button to show/hide.
'I
• '0
Specifications MAINTENANCE
r-
No picture TV reception channel is not right and try to reset the unit. Relocate the
TV set to the place where reception is better or select the sound key.
Specifications are subject to change without notice. No sound Volume is too low; Mute function is switched on.
The headphone has been plugged in or the signal is too weak.
Poor reception TV antenna is not correctly adjusted or TV channel is not right.
Dark or blurred picture The bright & contrast is too low. The battery voltage is too low.
27 28
"
•• o
R~gion code s~tting
Symptom(Common) Remedy
Region coding: All discs are coded by the sales territory. Please note the player
No power. Insert the AC adaptor securely into the power outlet. is set to region 1 coding by the factory which cannot be changed. This is in compliance
with the patent requirements.
• Condensation has formed: wait about 1 to 2 hours
• Play fails to start even when to allow the player to dry out.
PLAY is pressed.
• Play starts but then stops
immediately.
• This player support to play disc for DVD, VCD and
CD compatible, no other.
• The disc may be dirty and may require cleaning.
The region code for this product is H
• Ensure that the disc is installed with the label side up.
Picture is distorted during rapid The picture will be somewhat distorted at times: this is
advance or rapid reverse. normal.
No rapid advance or rapid Some discs may have sections which prohibit rapid
reverse play advance (or rapid reverse.)
No operations can be performed • Check the batteries are installed with the correct polarities.
with the remote control unit. • The batteries are exhausted: replace them with new ones.
• Point remote control at the remote control sensor and
operate.
• Operate the remote control unit at a distance of not
more than 6 m from the remote control sensoi.
• Remove the obstacles between the remote control and
, remote control sensor.
No key operation (by the main Disconnect the power adaptor and then reconnect it. (The
unit and/or the remote control player may not be operating properly due to lightning, static
unit) is effective. electricity or some other external factor.)
Symptom [OVO compatible] Remedy
Play does not start even Confirm the region code setting is right.
when title is selected.
If the audio soundtrack and/or subtitle language does not
Audio soundtrack and/or subtitle
exist on the disc, the language selected at the initial settings
language is not the initial settings.
will not be seen/heard.
No subtitles. • Subtitles appear only with discs which contain them.
• Subtitles are cleared from the TV monitor, Perform the
steps display the subtitles.
Alternative audio soundtrack • An alternative language is not selected with discs which
(or subtitle) languages fail to be do not contain more than one language.
selected. • In the case of some discs, the alternative language can
not be selected by operating the LANGUAGE or
SUBTITLE button. Try selecting it from the DVD menu if
one is available.
Angle cannot be changed. This function is dependent on software availability. Even if a
disc has a number of angles recorded, these angles may be
recorded for specific scenes only.
29 30
• '0
.J)
-sa
~.
Instruction Manual
J 7" PORTABLE DVD COMPATIBLE PLAYER
WITH TV TUNER
MODEL NO.:SC-491
.\.
,..
"
..
-,
• •• •
Extienda la antena hacia afuera a la longltud maxima
...-
STEP 4: Press "Menu" and
and select the satellite Icon PASO 4: Apnete "Menu" y entonces a
derecha cuatro veces y seleccione el I
-,
7 PORTABLE LCD TV
11
FEATURES:
• 7" Widescreen LCD TV
• Built-in Front Loading DVD Player Compatible
• Support: DVD/CD-R/CD-RW/JPG/MPEG4 Compatible
• USB and SD Card Compatible
• Rotary Rod Antenna
• AC/DC Operation
• AV Input/Output Jack
• External Antenna Jack
• Earphone Jack
• Built-in Lithium Rechargeable Battery
• Built-in Speakers
• Stylish Up and Down TV Stand
• Selectable Screen Mode: Wide (16:9) / Normal (4:3)
• Resolution: 1440 x 234
• On Screen Display
• Full Function Remote Control
GENERAL:
• Power: UL Approved Adapter: AC 100-240V-, SO/60Hz
& DC 12 Volt Compatibility
• Maximum Power Consumption: 24W
• Input Terminals: Component,
AudioNideo/ Audio Headphones
• Accessories: Remote Control, AC Adapter, DC Cord,
Audio Video Cables, Telescoping Antenna,
External Antenna And Instruction Manual
lIlt II ')hllllflY
1\1) ton 1III
1111.( IlIplIl
SO/MMC/MS Input
Compatible
Power Switch
L ACIOC Input
Headphone Jack
AV Input/Output Jack