Sunteți pe pagina 1din 2

NETWORK

INFORMATION SYSTEM
Lightning Data Logger

Promov Guarantees Safety


XIAMEN TAIHANG TECHNOLOGY CO.,LTD
Surge Solution Engineering Sdn Bhd (836303-K)
L-01-05, Block L, Jalan PPK 1, Persiaran Kinrara Section 3,
Taman Kinrara, 47100 Puchong, Selangor Darul Ehsan, Malaysia
Tel/Fax No: +603-6274 1818
Mobile: +6012-3456 181
Email: surge.solution@gmail.com surge.solution@gmx.com

Installed outside without


special maintenance.

Contact type with easy


installation and operation.

Solar battery and lithium


battery for power supply.

Recording lightning peak value

Recording lightning event (Date & time)

Recording lightning times

Sending recorded information

Many lightning data loggers


can constitute monitoring network.

Sending information about


lightning via wireless.

Product Introduction and Application

Live Application

With many years experience in design and considering the various on-site severe
environmental impacts, the T03-A2 Lightning data recorder has been developed
through 2 years of continuous improvements, which is dedicated to petrochemical,
railway and communication fields. Without maintenance management and external
power supply, it is easy to install and record data via wireless network transmission.
In the lightning protection and monitoring fields, the T03-A2 Lightning Peak Value
Recorder is a digital lightning current monitoring and recording device with practical
value. It may be used to record direct lightning current flowing through the arresting
device(lightning rod)installed on the building or inductive lightning current on the
userspower supply device in real-time. When lightning current occurs, the device can
record the time, times and intensity of the lightning current with no exception.
T03-A2 intelligent lightning peak value recorder has two inquiry modes, that is, live
querying information and sending or receiving information automatically via wireless.
The data of lightning current value recorded in the T03-A2 can be inquired by
engineer's operation on the key of equipment control panel and the data can be
displayed on the LCD. The data will be sent automatically to the receiving computer
for saving and printing via wireless network.
The recorder uses battery for power supply with built-in solar energy maintenance
module, which can be used for more than 5 years continuously without maintenance
under the condition of unmanned intervention. The whole device is encased in a plastic
box, reaching the anti-explosion grade of Increased Safety(explosion proof certified,
EEXD...), with that feature, it can be used to used for lightning arresting devices in the
fields such as high mountains, wild ridges, urban buildings, railway, petrochemical
electric power industries to record lightning current, and thus forming a network system
for lightning monitoring and recording.

Applied in the telecommunication base

Applied in the Petrochemical storage tanks

Applied in the railway contact network

Applied in the transformer substation

Promov Guarantees Safety

T03-A2 Specifications

150

100

Recording channel

Recording signal

Natural lightning discharge current peak

Data storage

Type 1: local displays


Type 2: ZigBee
Type3: CDMA/GSM

Recording peak value 50kA10% / 100kA10% / 200kA10%


Clock type

Type 1: GPS

Recording threshold

1kA

Operating voltage

3.8V/DC10%

Type 2: ZigBee

Power consumption

Standby: <20uArecording: <350mA

Type 3 CDMA/GSM/GPRS

Power lifespan

>5 years

Operating mode

Continuous

70

Temperature range

-30C65C

Humidity range

095%
IP65

T03-A2-1

T03-A2-3

Protection grade

Built-in Rogowski coil sensor


high-powered battery, without
external connecting line

Built-inpower supply system


of solar energy

Altitude

More than 3000m

Signal type

Positive polarity or negative polarity

Data display

Type 1built-in LCD display;


Type 2/3: computer in receiving end

Dimensions

150mm110mm75mm

S-ar putea să vă placă și