Documente Academic
Documente Profesional
Documente Cultură
The force which tends to make one surface slide parallel to an adjacent
surface is called a shear force.
The force divided by the area (of the glue joint), the stress in the glue, is
called shear stress.
-Pressure is the external force acting over a unit surface area of a material.
-Stress is an internal force acting over a cross sectional area within the material.
-It may also be thought of as the internal resistive response of a
material to the applied external pressure.
-They both have the units of force / area.
Flux ?
In transport phenomena , flux is defined as the rate of flow of a property per unit area, which
has the dimensions [quantity][time]1[area]1.
For example, the magnitude of a river's current, i.e. the amount of water that flows through a
cross-section of the river each second, or the amount of sunlight that lands on a patch of ground
each second is also a kind of flux.
Stress =
Momentum-flux
Calculus Review :
-Numerically by tables
-Geometrically by graphs
-Algebraically by formulas
-Verbally
&
k = 100 W/m.K,
dT/dx = ?
T1= 400K,
T2= 600K
SLOPE:
-Measure of Steepness Or Ratio of Rise to its Run
-And the one with negative slope falls downhill to the right
-The greater the absolute value of the slope, the more rapid the rise or fall.
-The slope of a vertical line is undefined. Since the run is zero for a vertical line,
we cannot evaluate the slope ratio m.
-So by drawing secant on two desired points we get the average value of concentration-rate
-Concentration-rate between points 40 to 45 seconds & 20 to 25 seconds